page_text stringlengths 2 3.31k | page_number int64 47 420 |
|---|---|
FOR SAFE DRIVING
Driver’s Seat Floor
Floor Mats
Example for genuine floor m
To prevent the driver’s side flo
sliding forward and possibly in
the operation of the pedals, M
genuine floor mats are recomm
Whenever you put the driver
mat back in the vehicle after
removed, hook the floor mat
the fasteners and position th
pr... | 47 |
Seat Belts and Child R
Systems Restraint
59RN02300
59RN02390 FOR SAFE DRIVING
Across the pelvis
59RN02400
59RN02380
2-2
55TH0-74E | 48 |
FOR SAFE DRIVING
2-3 55TH0-74E | 49 |
C
•
•
•
•
• FOR SAFE DRIVING
Correct Use of Seat Belt
69RHS158
• Adjust the seat to the correct position.
Sit your body fully into the seat.
• Make sure that the seat belt is not
twisted.
• Make sure that you place the lap portion
of the belt as low as possible across the
pelvis.
• The upper belt should rest on the ar... | 50 |
FOR SAFE DRIVING
2-5 Front Seats
Seat Adjustment 55TH0-74E | 51 |
Seat position adjustment lev
Pull the lever up and slide the
(2)
Seatback angle adjustment
Pull the lever up and move the H
ver (1) Seat height adjustment lever (3) (if
e seat. equipped) H
Pull the lever up to raise the seat. Push the r
lever down to lower the seat. o
t
After adjustment, move the seat and seat-
h
back ... | 52 |
FOR SAFE DRIVING
2-7 NOTE: T
It may be necessary to recline the seat-
S
back to provide enough overhead clear-
ance to remove the head restraint.
(1)
55T020190 T
To raise the front head restraint, pull c
upward the head restraint until it clicks. To
1
lower the head restraint, push down the
head restraint while holding... | 53 |
Mirrors
Inside Rearview Mirror (3)
(2)
(1)
83S02352
(1)Night driving
(2)Day driving
(3)Selector tab
You can adjust the inside rearview mirror
by hand to see the rear of your vehicle in
the mirror. To adjust the mirror, set the
selector tab (3) to the day position, then
move the mirror up, down or sideways by
hand to ob... | 54 |
FOR SAFE DRIVING
Auto Dimming Rearview M
(if equipped)
You can adjust the auto dimm
mirror by hand so you can se
of your vehicle in the mirror. T
mirror has a function of a
reducing glare from the lights
behind you. The function wor
ignition mode has been chan
by pressing the engine switch
• The mirror is always set to... | 55 |
You can adjust the outside r
rors by hand so as to see the
vehicle in the mirrors. center position to help prevent unin-
55T020220
tended adjustment.
rearview mir-
sides of your FOR SAFE DRIVING
2-10
55TH0-74E | 56 |
FOR SAFE DRIVING
Outside Rearview Mirror
Switch (if equipped)
2-11 Folding You can fold the mirrors when you park the R
vehicle in a narrow space. Push the folding (
switch to fold and unfold the mirrors. Make
W
sure the mirrors are completely unfolded
s
before you start driving.
s
u
i
•
•
•
NOTE:
• If you press the fo... | 57 |
rors will not be unfolded a
even when the engine swit
to change the ignition mod
ON.
• If any of the doors is not o
about 30 seconds after th
unlocked by using the keyle
system remote controller
switch, the doors will be l
and the mirrors will be fold
cally.
How to switch the remote fo
function
When the ignition mode i... | 58 |
FOR SAFE DRIVING
• If you cannot complete the
step 3) and 4) within 15 s
rectly, the state of the remot
ror function will not chan
interior buzzer does not be
the procedure again from th
2-13 Rear Seats
Head Restraints (if equipped)
Head restraints are designed to help
reduce the risk of neck injuries in the case
of an... | 59 |
To raise the rear head restrain
head restraint until it clicks.
head restraint, push down
restraint while holding in the
(1). If a head restraint must (for cleaning, replacement, etc.), push in S
the lock button (1) and pull the head
F
restraint all the way out.
T
When installing a child restraint system, f
adjust the ... | 60 |
FOR SAFE DRIVING
3) Slide the release lever o
each split seat in arrow d
fold the seatbacks forward.
2-15 To return the seat to the normal position,
follow the procedure below.
R
A
55TB02011
b
on the top of
s
direction, and
. Unlock
Red
Lock
55TB02012
Raise the seatback until it locks into place.
After returning the se... | 61 |
Safety for Child
For safety, carefully drive at lower speed
than usual.
Place a Child in the Rear Seat
51K0188
• Seat a child next to an adult when possi-
ble, and ensure that the child can be
visually monitored.
• Select an appropriate child restraint sys-
tem suitable for the child’s age and phys-
ical size. FOR SAF... | 62 |
FOR SAFE DRIVING
2-17 vide the best performance, result-
ing in severe injury.
Do not allow two or more people to
use a single seat belt. head upright or sit on their own.
55TH0-74E | 63 |
Do not Let a Child Play w
Using the Child Restraint
Refer to “Securing Child Rest
by Seat Belt” in this section. An Adult Needs to Open or Close
with Seat
Each Door or Window, and Adjust
Seats
Only an adult should open or close each
door or window and adjust seats, not to get
a child’s hands, arms, legs or neck, etc.
c... | 64 |
FOR SAFE DRIVING
2-19 69RHS165 55TH0-74E | 65 |
Lap-shoulder Belt
Emergency locking retracto
The seat belt has an emerg
retractor (ELR), which is desi
the seat belt only during a su
impact. It also may lock if you
across your body very quickly
pens, let the belt go back to u
then pull the belt across you
slowly. or (ELR)
gency locking
igned to lock
udden stop or
u p... | 66 |
FOR SAFE DRIVING
To unfasten the seat belt, p
“PRESS” button on the buckl
the belt slowly while holding th
the latch plate.
NOTE:
If the seat belt cannot be pu
fully retracted position, firmly
and release it. Then smoothly
out of the retractor.
2-21 Adjustment of Seat Belt Length
The seat belt does not require length
a... | 67 |
N
A
r
i
r
(1)
55TB0206 FOR SAFE DRIVING
belt before starting the engine.
NOTE:
Along with the seat belt reminder light, a
reminder message shall also come on the
information display (if equipped), for un-
restrained driver and/or front passenger.
2-22
55TH0-74E | 68 |
FOR SAFE DRIVING
Driver’s seat belt reminder
If the driver’s seat belt remain
when the ignition switch is tu
position or the engine switch i
change the ignition mode
reminder works as follows:
1) The driver’s seat belt remin
come on. The front pass
belt reminder light will also
front passenger does not f
seat belt.
2) ... | 69 |
NOTE:
• If you put an object on the
seat, the weight of the o
sensed by the sensor and t
senger’s seat belt remind
come on and then the int
may beep.
• If a child or a small sized p
the front passenger’s seat o
is put on the front passenge
weight will not be sensed b
and the interior buzzer may Rear passenger’s seat be... | 70 |
FOR SAFE DRIVING
2-25 S
Seat Belt Care
Caring for seat belts is the same as caring
for any type of regular cloth material, etc. Seat Belt Hanger
55TB02013
55TH0-74E | 71 |
Seat Belt Pretensione
System (Only for Fro
To determine if your vehicle
with a seat belt pretensioner s
front or rear seating position
label on the seat belt at the b
the letter “p” appears as illu
vehicle is equipped with the s
tensioner system. You can us er sioner seat belts in the same manner as m
ordinary seat bel... | 72 |
FOR SAFE DRIVING
position or the engine switc
to change the ignition mod
3) If the air bag light comes o
ing.
Have both systems inspecte
Suzuki authorized workshop
possible.
Service on or around the prete
tem components or wiring m
formed only by Maruti Suzuk
workshop who is specia
Improper service could res
tended act... | 73 |
FOR SAFE DRIVING
55TH0-74E | 74 |
FOR SAFE DRIVING
able; check that the restraint
select meets applicable safety
All child restraint systems are
be secured in vehicle seats e
belts (lap portion of lap-shou
by special rigid lower ancho
onto the floor. Whenever pos
Suzuki recommends that ch
systems be installed on the
According to accident statist
are sa... | 75 |
Child Restraint Syste
Child Restraint
The suitability of each passen
Whenever you carry children
restraints, referring to the table
Key of letters to be inserted in
U =Suitable for ‘universal’ cate
X =Seat position not suitable f
N.A = Seat position not availab
NOTE:
• ‘universal’ is the category in
• ‘Outboard’ indica... | 76 |
FOR SAFE DRIVING
2-31 S
T
r
1
injured in a collision.
NOTE:
Stow the removed head restraint in the lug-
gage compartment so it will not cause
inconvenience to the occupants. Securing
This section explains securing the child
restraint system in the rear seat.
55TB02014
1) When the child restraint system con-
tacts the h... | 77 |
2) If your vehicle is equipp
reclining mechanism of re
adjust the angle of the sea
there is no gap betwee
restraint system and the se
3) Make sure that the child r
tem is securely fastened
seat.
4) Make sure to pass the se
passenger’s seat through
parts, according to the inst
ual that came with the c
system. seat belt ... | 78 |
FOR SAFE DRIVING
anchorages in the rear seat ou
ing positions for securing a IS
child restraints with the conn
The lower anchorages are lo
the rear of the seat cushion m
tom of the seatback.
2-33 FIX type child restraint sys- H
to the instructions provided
straint system manufacturer.
on, try moving the child
m in all ... | 79 |
FOR SAFE DRIVING
hild restraint toward the anchor-
at the connecting bar tips are
ooked to the anchorages. Use
to confirm the position.
54G185
front of the child restraint and
child restraint forcefully to
connecting bars. Check that
securely latched by trying to
child restraint system in all
especially forward.
top ... | 80 |
FOR SAFE DRIVING
Installation of Child Restr
Top Tether
Some child restraint systems
use of a top tether strap. Top te
ages are provided in your v
locations shown in the illustrati
The number of the top tethe
brackets provided in your veh
2-35 on the vehicle specification. Install the child
restraint system as follows:... | 81 |
FOR SAFE DRIVING
Supplemental Restra
System (Airbags)
Your vehicle is equipped wi
mental restraint system cons
following components in addi
shoulder belt at each seating p
(1)Side curtain airbag
equipped)
(2)Side crash sensor (if equ
(3)Front passenger’s front a
module
(4)Driver’s front airbag mod
(5)Forward crash sens... | 82 |
FOR SAFE DRIVING
What is SRS Airbag Syste
SRS stands for “Supplemen
System”. This system aims to
sengers in their seats for safe
cluster does not blink or come
ignition switch is first turned t
tion, or the ignition mode is firs
ON, or airbag warning light
comes on while driving, the a
(or the seat belt pretensioner
no... | 83 |
collisions when the ignition mo
Side airbags and side curtain
not designed to inflate in fronta
lisions, rollovers or minor sid
since they would offer no
those types of accidents. Only
bag and side curtain airbag o
the vehicle that is struck will
ever, in a frontal angle collis
airbags and side curtain a
inflate. Since... | 84 |
FOR SAFE DRIVING
2-39 55TH0-74E | 85 |
74TB02001
2-40
55TH0-74E | 86 |
2-41 55TH0-74E | 87 |
Handling for Airbags
For Proper SRS Airbag S
Operation
If objects are positioned with
where the airbag deploys, s
might be impacted and blown
bag may not deploy properly. s
System
hin the range
such objects
off or the air- FOR SAFE DRIVING
2-42
55TH0-74E | 88 |
2-43 69RHS171
55TH0-74E | 89 |
c
s
s
p
t
t
S
o FOR SAFE DRIVING
n of Airbags
ystem Works
collision, the collision sensors
rapid deceleration, and if the
dges that the deceleration rep-
evere frontal collision, the con-
igger the inflators. The inflators
appropriate airbags with nitro-
n gas. The inflated airbags pro-
hion for your head and upper
ai... | 90 |
2-45 (Continued) cause severe injury.
(Continued)
55TH0-74E | 91 |
S
I
r
S
p
I
t
c
p
s
a
S
i
o
s
y
v
a
S
o
S
Your vehicle is equipped with a diagnostic s
module which records information about d
the airbag system if the airbags deploy in a i
collision. The module records information m
about overall system status, and which T
sensors activated the deployment. o
t
h
m
9
c
v
p
w
c FOR S... | 92 |
FOR SAFE DRIVING
2-47 55TH0-74E | 93 |
than about 30 degrees at le
angles from the front of your v
in certain collisions at low sp
bag may not inflate. eft and right • Collision that the front of your vehicle
vehicle. Also, goes under the bed of a truck etc. •
peed, the air- 80J105E
• Collision with a fixed wall or guardrail at
left and right angles of grea... | 94 |
(if equipped) and Side
gs (if equipped)
Conditions
and side curtain airbags
on)
80J119
the side at about a right
neral passenger car to your
re than about 30 km/h or in
act
55TH0-74E | 95 |
2-50
55TH0-74E | 96 |
2-51 55TH0-74E | 97 |
FOR SAFE DRIVING
2-52
55TH0-74E | 98 |
FOR SAFE DRIVING
2-53 55TH0-74E | 99 |
• If animals move about in the vehi-
cle, it may interfere with driver's
view. Also, in a sudden braking, it
may result in an accident.
When you bring animals into the
vehicle, make sure that animals do
not move about. FOR SAFE DRIVING
2-54
55TH0-74E | 100 |
BEFORE DRIVI
Keys ............................
Doors ..........................
Keyless Entry System
Keyless Push Start Sy
Security System (if equ
Windows ....................
Headlight Leveling Sw
Lighting Control Lever
Turn Signal Control Le
Hazard Warning Switc
Windshield Wiper and
Horn ............................... | 101 |
BEFORE DRIVING
Keys
Your vehicle comes with a pa
keys. Keep one of the keys as
in a safe place. One key can o
locks on the vehicle.
Key Number Plate
The key identification num
stamped on a metal tag (2) p
the keys. Keep the tag in a s
you lose your keys, you will ne
ber to have new keys mad
number below for your future... | 102 |
NOTE:
• When leaving the vehicle
short period of time, do not l
valuables in the vehicle, to
theft.
• Depending on the setting
the security alarm and the o
ditions of the doors, an alar
ate. Refer to “Security
equipped)” in this section. Side Door Locks
(2)
(1)
(3)
(4)
59RN03180
(1)UNLOCK
(2)LOCK
(3)Front T
(4)Rear t
r... | 103 |
BEFORE DRIVING
Central Door Locking Sys
(1)
(4)
(1)UNLOCK
(2)LOCK
(3)Front
(4)Rear
You can lock and unlock all d
ing the tailgate) simultaneou
the key in the driver’s door loc
To lock all doors simultaneous
key in the driver’s door lock
top of the key toward the fron
cle.
To unlock all doors simultane
the key in the dr... | 104 |
from inside the vehicle. Wh
lever is in the lock position
door can only be opened f
When the lock lever is in the
tion (1), the rear door can be
inside or outside.
NOTE:
When you open a door from
your hand out of the window
door handle. hen the lock
(2), the r
from outsi
e unlock p
opened fr
m inside,
and use
pletely. ... | 105 |
BEFORE DRIVING
Unlocking from inside the v
If you cannot unlock the tailg
the key in the driver’s door lo
discharged lead-acid battery
tion, ask Maruti Suzuki auth
shop. In emergency situation
procedures below.
1) Remove the luggage c
cover (if equipped) and f
seat forward for easier acc
“Folding rear seats” in
DRIVING... | 106 |
Keyless Entry System Transmitter C
•
•
•
N
Y
d
i
(1)
m
(2)
h
“
79MH0237 C
(1)LOCK button
T
(2)UNLOCK button
t
w
You can lock or unlock all doors (including
the tailgate) simultaneously by operating
W
the transmitter near the vehicle.
•
•
C
o BEFORE DRIVING
Central door locking system
• To lock all doors, push LOCK but... | 107 |
BEFORE DRIVING
NOTE:
If no door is opened within a
onds after UNLOCK button (2)
the doors will automatically loc
NOTE:
• If you lock the doors using
ter when the engine hood
siren will sound 3 times to r
equipped).
• If the security system was t
to an unauthorized entry int
and then you unlock the do
transmitter, the s... | 108 |
Battery replacement
If the transmitter become
replace the battery.
To replace the battery of the tr
1) Remove the screw (1), a
transmitter cover.
2) Remove the transmitter (2) (3)Lithium disc type battery:
es unusable, CR1616 or equivalent
3) Put the edge of a flat-bladed screw-
ransmitter: driver in the slot of the tr... | 109 |
BEFORE DRIVING
By ensuring the used battery
of or recycled correctly, you w
vent potential negative conse
the environment and human h
could otherwise be caused b
ate battery disposal. The
materials will help to cons
resources. For more detailed
about disposing of or recycling
battery, consult a Maruti Suzu
workshop .
B... | 110 |
NOTE:
If no door is opened within a
onds after UNLOCK button (2)
the doors will automatically loc
Car locator function
This function helps in locating
Push both of LOCK butto
UNLOCK button (2) for more
onds. The turn signal lights
about 27.5 seconds. Also, t
sound for about 27.5 seconds
time.
To cancel the car locator ... | 111 |
BEFORE DRIVING
• Push one of the request sw
to unlock all doors.
NOTE:
You can switch the function th
doors from requiring two push
ing one push, and vice versa,
mation display setting mode. F
how to use the information dis
“Information display” in “IN
CLUSTER” section.
When the doors are unlocked:
• The turn signal li... | 112 |
• When the remote controller
with or covered by a metal o
• When a radio wave type rem
entry is used nearby.
• When the remote controll
near an electronic device s
sonal computer.
Some additional precautions
take and information you shou
of are:
• Check that the key is sto
remote controller. If the rem
becomes unusable... | 113 |
BEFORE DRIVING
Reminder function
If the remote controller is not i
under the following conditions
sounds intermittently for abou
and the immobilizer/keyless pu
tem warning light on the instru
blinks:
When one or more doors are
all of the doors are later clo
ignition in any other mode
(OFF).
3-13 The indicator light wil... | 114 |
shop or the other stores, ch
of manufacture for the batte
If the remote controller bec
able, replace the battery as fo
(2)
1) Pry open the remote contro
• To prevent the case from
aged, cover the flat-bl
driver with a soft cloth. In
bladed screwdriver in th
pry it open.
2) Replace the battery.
• Remove the old battery
... | 115 |
BEFORE DRIVING
Security System (if e
The security system is arme
close and lock all doors (inclu
hood and tailgate) by using
entry system transmitter, k
start system remote controlle
switch.
Once the system is armed, an
open a door by using any oth
than the keyless entry system
keyless push start system rem
ler, reques... | 116 |
• The security system is not
all doors are locked using
outside, using the door lock
central door locking switch f
• If any door is not operated w
imately 30 seconds after the
been unlocked using the k
system transmitter, keyless
system remote controller
switch, the doors are a
locked again. When the
locked, the securi... | 117 |
BEFORE DRIVING
blast warning). The security
cator continues to blink duri
NOTE:
If you set the full blast warnin
higher than the pre-warning
the setting mode of the inform
or the vehicle feels such sho
able to trigger the full blast wa
blast warning will be trigger
tially. In this case, the pre-wa
be triggered.
3-17 y ... | 118 |
To open a window, push the to
switch. To close the window, l
part of the switch.
The driver’s window has A
and AUTO-UP features for gr
nience (at toll booths or d
restaurants, for example). Th
allow the driver to open or cl
dow without holding the wind
DOWN or UP position. Press
up the driver’s window switc
and release... | 119 |
BEFORE DRIVING
Pinching Prevention Func
The driver’s window is equi
pinching prevention function.
detects a foreign object that
the window as it is being close
UP feature, which allows you
window without holding the w
in UP position, and stops the
closing to prevent damage.
NOTE:
Even if you cannot close the w
AUTO-UP ... | 120 |
Level the headlight beam acc
load condition of your vehicl
this switch. The chart shows
ate switch position for differen
conditions. For Petrol Model F
cording to the
le by turning
the appropri-
nt vehicle load BEFORE DRIVING
For CNG Model
3-20
55TH0-74E | 121 |
BEFORE DRIVING
Lighting Control Leve
Automatic Light Operatio
(if equipped)
(4)
(3)
(2)
(1)
3-21 er Your vehicle’s lighting system is controlled by tw
and the auto-on headlight system (when the lig
on
The two systems work together to operate your
ON: Lights ON
LIGHT: When it is light around the light sens
DARK: When it... | 122 |
To turn the lights on or off, tw
on the end of the lighting c
There are four positions:
OFF (1)
All lights are off.
AUTO (2) (if equipped)
This function works when
switch is turned to “ON” po
engine switch is pressed to
ignition mode to ON. The he
position lights are turned on
matically according to the am
side light d... | 123 |
BEFORE DRIVING
2) The lighting switch is in “
tion.
3) You turn the ignition sw
position or press the engi
change the ignition mode t
This system is activated by a
the light sensor (5) on the pa
of instrument panel. Do not co
sor (5). Otherwise, the system
correctly.
NOTE:
The light sensor reacts even
rays, so it may o... | 124 |
To cancel the function:
Perform any of the following o
• Pull the lighting control leve
once.
• Turn the ignition switch to “A
position or change the igni
ACC or ON by pressing
switch.
• Turn the lighting switch t
position than “AUTO” positio
NOTE:
• When the “To home” is fun
front fog lights (if equippe
light (if equi... | 125 |
BEFORE DRIVING
the turn signal light indica
instrument cluster will be tur
NOTE:
If the angle by which you turn
wheel is small, the lever wi
automatically to its original po
case, return the lever to its orig
manually.
Lane change signal
Move the lever partially upwa
ward to when turning leftward
and hold the lever in ... | 126 |
Windshield Wiper and
Lever
When the ignition switch in “
or the ignition mode ON, you
wiper/washer lever. d Washer W
s
W
s
“ON” position
p
u can use the
t
e
w
I
a
1
2
3
4
I
t
S
w BEFORE DRIVING
When the operative wipers suddenly
stop
When the wipers are under heavy load
such as covered by snow and the tem-
perature of ... | 127 |
BEFORE DRIVING
Windshield Wipers
You can operate the windshie
moving the lever (1) upward o
3-27 W
((11))
((11))
55TB306
55TB305
If the lever is equipped with “INT TIME”
eld wipers by control, turn the control forward or back- I
or downward. ward to adjust the intermittent wiper opera- w
a
tion to the desired interval.... | 128 |
Rear Window Wiper R
55TB308
•
You can operate the rear window wiper by
twisting the lever (2) as shown in the illus-
tration.
• BEFORE DRIVING
Rear Window Washer
55TB309
• If you twist the lever (2) in the direction
of and align it to (washer) position
above “ON” position, the rear window
washer fluid will be spraye... | 129 |
BEFORE DRIVING
Horn
Press the horn button of the st
to sound the horn. The horn w
the ignition switch in any po
ignition mode.
3-29 Heated Rear Window Switch
(1)
55T030300
52RM20420
While the engine is running or the engine
teering wheel
automatically stops by the ENG A-STOP
will sound with system, you can use the heat... | 130 |
INSTRUMENT C
Instrument Cluster (Ty
Information Display (T
Instrument Cluster (Ty
Information Display (T
Warning and Indicator
59RN04640 INSTRUMENT CLUSTER
CLUSTER
ype A) ...............................................4-1
Type A) .............................................4-4
ype B) .................................... | 131 |
INSTRUMENT CLUSTER
Instrument Cluster (T
(1)Speedometer
(2)Tachometer
(3)Information display
(4)
NOTE:
For vehicle fitted with CNG fue
4-1 R
Type A)
(4)Trip meter selector knob
(5)Indicator selector knob
(6)Warning and indicator lights
(2) (6) (1
(6) (7) (3) (8)
el system, refer to the supplementary owner's manual. (7)... | 132 |
Speedometer
The speedometer indicates v
in km/h.
Speed Alert System
The speed alert system g
warning for alert of over-spe
When vehicle speed exceeds
h, primary level warning with tw
sound every minute. When
speed exceeds about 120 km
ary level warning with contin
will sound.
If the vehicle speed is slow
about 118 km/h... | 133 |
acceptable temperature ran
“H” and “C”. If the indicator
“H”, overheating is indicated
engine overheats, the Eng
Temperature Light (1) will be
the instructions for engine ov
“EMERGENCY SERVICE” sec
O/D
OFF
4-3 nge between
(1)
r approaches
d. When the
gine Coolant
e ONH. Follow
verheating in
ction
55TB406 ition switch i... | 134 |
NOTE:
• If you do not turn the knob w
seconds of activating, the
control display will be cance
ically.
• When you reconnect the le
tery, the brightness of the
panel lights will be reinitializ
the brightness according to
ence.
NOTE:
If you adjust to the maximum
level when the position lights
are on, the following functi... | 135 |
INSTRUMENT CLUSTE
Clock
The display (G) shows the tim
To change the time indication
1) Push the trip meter sele
and the indicator selec
together.
2) To change the hour indic
indicator selector knob (2
repeatedly when the ho
blinks. To change the h
quickly, turn and hold
selector knob (2). To set
cation, push the indica... | 136 |
Selector position (for autom
mission vehicles) /
Gear position (for automat
sion vehicles)
The display (D) shows the
selector position (16) or the g
(17).
• When the manual mode is n
display shows the selector p
• When using the manual m
play shows the current gear
For details on how to use the t
refer to “Using transm... | 137 |
INSTRUMENT CLUSTER
Trip meter
The trip meter can be used to
distance traveled on short trip
fuel stops.
You can use the trip meter A o
independently.
To reset the trip meter, push
trip meter selector knob (1) un
shows 0.0.
NOTE:
The indicated maximum valu
meter is 9999.9. When you
maximum value, the indicate
return to ... | 138 |
(For “L/100km” or “km/L” se
To change the unit of avera
sumption, while pushing and
trip meter selector knob (1), tu
tor selector knob (2).
NOTE:
When you change the units
fuel consumption is displa
instantaneous fuel consumpt
be changed automatically.
Driving range
If you selected driving range
you drove the vehicle, ... | 139 |
INSTRUMENT CLUSTER
Energy flow (if equipped)
The state of SHVS operation c
“OPERATING YOUR VEHICL
4-9 R
can be checked on the information display. For details, refer to “S
LE” section. SHVS (Smart Hybrid Vehicle by Suzuki)” in
55TH0-74E | 140 |
Setting Mode
In the setting mode, you can s set up and customize the following functions. INSTRUMENT CLUSTER
4-10
55TH0-74E | 141 |
INSTRUMENT CLUSTER
4-11 R 55TH0-74E | 142 |
NOTE:
Depending on vehicle’s s
some items may not be displa
How to use the setting mode
1) When the ignition switch
position or the ignition mod
the vehicle is stationary.
2) Push and hold the indica
knob (2) until the dis
“ ”.
3) Turn and/or push the indic
knob (2) to select a funct
want to set up according to
the pre... | 143 |
INSTRUMENT CLUSTER
Lighting time of the “To hom
“ ” (if equipped)
• : Disable the “To
tion
• : 10 seconds (defa
• : 15 seconds
• : 20 seconds
• : 25 seconds
: 30 seconds
Shock sensor “ ”
• : Enable the shock
• : Disable the shock
(default setting)
Pre-warning sensitivity of
the shock sensor “ ”
• : Disable the pre-w
• ... | 144 |
Instrument Cluster (T
1.Speedometer
2.Tachometer
3.Fuel gauge Type B)
5.Information display
6.Trip meter selector knob
7.Indicator selector knob INSTRUMENT CLUSTER
4-14
55TH0-74E | 145 |
INSTRUMENT CLUSTER
Speedometer
The speedometer indicates ve
Speed Alert System
The speed alert system g
warning for alert of over-spe
When vehicle speed exceeds
h, primary level warning with tw
sound every minute. When
speed exceeds about 120 km
ary level warning with contin
will sound.
If the vehicle speed is slow
abo... | 146 |
End of preview. Expand in Data Studio
README.md exists but content is empty.
- Downloads last month
- 16