source_content stringclasses 3
values | compatibility_relations listlengths 3 5 |
|---|---|
CP-100 Compression Platen Set
The CP-100 hardened compression platen set mounts on the UTM-100 universal testing frame through its threaded 1.5 in. load-cell connection. The 100 mm diameter platens are intended for compression testing of concrete cylinders up to 100 mm in diameter. For specimens taller than 200 mm, use... | [
{
"source_entity": "CP-100 hardened compression platen set",
"source_entity_type": "accessory",
"relation_type": "compatible_with",
"target_entity": "UTM-100 universal testing frame",
"target_entity_type": "testing equipment",
"compatibility_conditions": "Requires the frame's threaded 1.5 in... |
EX-25 Clip-On Extensometer
The EX-25 clip-on extensometer connects to the T-series test controller through the 9-pin extensometer input. Its nominal gauge length is 25 mm, with a maximum travel of 10 mm. The knife-edge carrier is suitable for round specimens 3 mm to 12 mm in diameter and flat specimens up to 8 mm thick... | [
{
"source_entity": "EX-25 clip-on extensometer",
"source_entity_type": "accessory",
"relation_type": "compatible_with",
"target_entity": "T-series test controller",
"target_entity_type": "testing equipment",
"compatibility_conditions": "Connects through the 9-pin extensometer input.",
"e... |
WG-12 Self-Tightening Wedge Grips
The WG-12 self-tightening wedge grips are compatible with the M40 electromechanical test frame when installed with the 30 mm lower adapter. Standard jaw faces accept flat metallic coupons from 0.5 mm to 6 mm thick. The grips are intended for room-temperature tensile testing of sheet me... | [
{
"source_entity": "WG-12 self-tightening wedge grips",
"source_entity_type": "accessory",
"relation_type": "compatible_with",
"target_entity": "M40 electromechanical test frame",
"target_entity_type": "testing equipment",
"compatibility_conditions": "Requires installation with the 30 mm low... |
Material Testing Instrument Accessory Compatibility Relations Dataset
This dataset covers equipment compatibility, specimen suitability, and intended-use information drawn from product pages and technical documentation for material testing accessories such as fixtures, compression platens, and extensometers. Its relation annotations connect accessories, testing equipment, specimens, and applications, with supporting source text for traceability. It can support relation extraction fine-tuning, instrument configuration knowledge management, and accessory selection.
Technical Specifications
| Field | Type | Description |
|---|---|---|
| source_content | string | Original webpage text or technical documentation used as the source for relation extraction. |
| compatibility_relations | array | Relations among testing accessories, equipment, specimens, or intended applications, with supporting evidence from the source. |
Compliance Statement
| Authorization Type | CC-BY-NC-SA 4.0 (Attribution–NonCommercial–ShareAlike) |
| Commercial Use | Requires exclusive subscription or authorization contract (monthly or per-invocation charging) |
| Privacy and Anonymization | No PII, no real company names, simulated scenarios follow industry standards |
| Compliance System | Compliant with China's Data Security Law / EU GDPR / supports enterprise data access logs |
Source & Contact
- Downloads last month
- -