Dataset Preview
Duplicate
The full dataset viewer is not available (click to read why). Only showing a preview of the rows.
The dataset generation failed
Error code:   DatasetGenerationError
Exception:    CastError
Message:      Couldn't cast
query: string
target: string
filename: string
answer: string
img_name: string
file_path: string
to
{'query': Value('string'), 'target': Value('string'), 'file_path': Value('string'), 'img_name': Value('string'), 'answer': Value('string')}
because column names don't match
Traceback:    Traceback (most recent call last):
                File "/usr/local/lib/python3.14/site-packages/datasets/builder.py", line 1835, in _prepare_split_single
                  for key, table in generator:
                                    ^^^^^^^^^
                File "/src/services/worker/src/worker/job_runners/config/parquet_and_info.py", line 621, in wrapped
                  for item in generator(*args, **kwargs):
                              ~~~~~~~~~^^^^^^^^^^^^^^^^^
                File "/usr/local/lib/python3.14/site-packages/datasets/packaged_modules/json/json.py", line 373, in _generate_tables
                  self._cast_table(pa_table, json_field_paths=json_field_paths),
                  ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                File "/usr/local/lib/python3.14/site-packages/datasets/packaged_modules/json/json.py", line 132, in _cast_table
                  pa_table = table_cast(pa_table, self.info.features.arrow_schema)
                File "/usr/local/lib/python3.14/site-packages/datasets/table.py", line 2394, in table_cast
                  return cast_table_to_schema(table, schema)
                File "/usr/local/lib/python3.14/site-packages/datasets/table.py", line 2322, in cast_table_to_schema
                  raise CastError(
                  ...<3 lines>...
                  )
              datasets.table.CastError: Couldn't cast
              query: string
              target: string
              filename: string
              answer: string
              img_name: string
              file_path: string
              to
              {'query': Value('string'), 'target': Value('string'), 'file_path': Value('string'), 'img_name': Value('string'), 'answer': Value('string')}
              because column names don't match
              
              The above exception was the direct cause of the following exception:
              
              Traceback (most recent call last):
                File "/src/services/worker/src/worker/job_runners/config/parquet_and_info.py", line 1379, in compute_config_parquet_and_info_response
                  parquet_operations, partial, estimated_dataset_info = stream_convert_to_parquet(
                                                                        ~~~~~~~~~~~~~~~~~~~~~~~~~^
                      builder, max_dataset_size_bytes=max_dataset_size_bytes
                      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                  )
                  ^
                File "/src/services/worker/src/worker/job_runners/config/parquet_and_info.py", line 956, in stream_convert_to_parquet
                  builder._prepare_split(split_generator=splits_generators[split], file_format="parquet")
                  ~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                File "/usr/local/lib/python3.14/site-packages/datasets/builder.py", line 1702, in _prepare_split
                  for job_id, done, content in self._prepare_split_single(
                                               ~~~~~~~~~~~~~~~~~~~~~~~~~~^
                      gen_kwargs=gen_kwargs, job_id=job_id, **_prepare_split_args
                      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                  ):
                  ^
                File "/usr/local/lib/python3.14/site-packages/datasets/builder.py", line 1887, in _prepare_split_single
                  raise DatasetGenerationError("An error occurred while generating the dataset") from e
              datasets.exceptions.DatasetGenerationError: An error occurred while generating the dataset

Need help to make the dataset viewer work? Make sure to review how to configure the dataset viewer, and open a discussion for direct support.

query
string
target
string
file_path
string
img_name
string
answer
string
Which diagram correctly represents the arrangement of 8 electrons in the 3d and 4s orbitals of a ground state $\mathrm{Fe}$ atom? (<ImageHere>)
D
选择题_31.json
Selection_1_1.png
**Answer: D** Iron has 26 electrons, so its ground-state configuration is [Ar] 3d⁶ 4s². The 8 electrons in question are the 6 in 3d and the 2 in 4s. Applying Hund's rule and the Pauli exclusion principle: - **4s²:** both electrons pair in the single 4s orbital (↑↓). - **3d⁶:** the first five electrons go into the fi...
If an ideal gas undergoes reversible changes in steps I, II, III on a p-T diagram, starting from A and returning to A, then the corresponding p-V diagram is () <ImageHere>
C
选择题_31.json
Selection_2_1.png
## Answer: C **Reading the p-T diagram:** - **Process I** is a vertical line, so T is constant and p increases. It is an isothermal compression, so V decreases. - **Process II** is a horizontal line, so p is constant and T increases. It is an isobaric expansion, so V increases. - **Process III** returns from the high...
In the $\mathrm{V}-\mathrm{T}$ diagram, an ideal gas undergoes reversible changes in steps $\mathrm{Ⅰ}$, $\mathrm{Ⅱ}$, $\mathrm{Ⅲ}$. Then the $\mathrm{p}\mathrm{V}$ diagram of its phase transition is ()<ImageHere>
B
选择题_31.json
Selection_3_1.png
**Answer: B** **Reading the V–T diagram:** - **Step I** (A → right): the line is horizontal, so V is constant. T increases, so this is an isochoric heating. From pV/T = const, p increases. - **Step II** (vertical up): T is constant and V increases. This is an isothermal expansion, so p decreases. - **Step III** (back...
$1\mathrm{mol}$ of an ideal gas changes from $\mathrm{A}$ to $\mathrm{B}$ in the process shown in the diagram. The work done by the system is () <ImageHere> A, $\mathrm{p}_{3}\mathrm{V}_{3}-\mathrm{p}_{1}\mathrm{V}_{1}$ B, $\mathrm{RT}\ln\frac{\mathrm{V}_{3}}{\mathrm{V}_{1}}$ C, $\mathrm{P}_{2}\left(\mathrm{V}_{2}-\ma...
C
选择题_31.json
Selection_4_1.png
**Answer: C**, $W = p_2(V_2-V_1)+p_1(V_3-V_2)$ **Reading the path from the diagram:** 1. A is at $(p_3, V_1)$. The first step is a vertical drop at constant volume $V_1$ from $p_3$ to $p_2$. No work is done. 2. Next is a horizontal segment at constant pressure $p_2$ from $V_1$ to $V_2$. 3. Then a vertical drop at con...
See the figure, there is gas on the left side of the adiabatic box, and vacuum on the right side, with the same volume on both sides. Taking the gas on the left as the system, after removing the partition, the work done by the system is $\mathrm{W}_{1}$. If $\frac{1}{4}$ of the gas is put into the right box in advance,...
B
选择题_31.json
Selection_5_1.png
This is a free expansion problem (Joule expansion) in an adiabatic rigid box. **Case 1:** All the gas is on the left, vacuum on the right. When the partition is removed, the gas expands freely into the vacuum. The gas does not push against any external pressure (the expansion occurs into vacuum), so the work done by t...
As shown in the image, the system changes from initial state $\mathrm{A}$ to final state $\mathrm{B}$ through three paths, with $\mathrm{p}_{initial} = \mathrm{p}_{final}$. For which path is $\Delta\mathrm{H} = \mathrm{Q}$? () <ImageHere> A. Only path I B. Only path II C. Only path III D. All three paths
B
选择题_31.json
Selection_6_1.png
**Answer: B. Only path II** ΔH = Q holds when the process is isobaric (constant pressure) and the only work is pressure-volume work. Since ΔH = ΔU + Δ(pV), at constant pressure ΔH = ΔU + pΔV = Q_p. In the p-V diagram, the straight horizontal line from A to B (path II) is at constant pressure. Paths I and the wavy pat...
$1\mathrm{mol}$ of a monoatomic ideal gas starts from the initial state $\left(\mathrm{p}^{\circ},22.4\mathrm{~L}\right)$ and undergoes the changes as shown in the figure. The temperature at point C is() <ImageHere> A, $273\mathrm{K}$ B, $546\mathrm{K}$ C, $544\mathrm{K}$ D, no definite temperature
C
选择题_31.json
Selection_7_1.png
**Answer: C (544 K)** **Step 1: Temperature at A.** Using the initial state (p°, 22.4 L) for 1 mol of gas, with p° = 1.013×10⁵ Pa: $$T_A=\frac{pV}{nR}=\frac{1.013\times10^5\times 22.4\times10^{-3}}{1\times 8.314}\approx 273\ \text{K}$$ **Step 2: Temperature at B.** The process A→B is horizontal at ΔU = 0. For an ide...
An ideal gas undergoes a cycle as shown in the diagram $\mathrm{A}\rightarrow\mathrm{B}\rightarrow\mathrm{C}\rightarrow\mathrm{A}$, in which the $\Delta\mathrm{U}$ of the process $\mathrm{B}\rightarrow\mathrm{C}$ is equal to which work()? <ImageHere> A、$\mathrm{W}_{1}$ B、$\mathrm{W}_{2}$ C、$\mathrm{W}_{3}$ D、$\mathrm{...
A
选择题_31.json
Selection_8_1.png
**Answer: A, W₁** The cycle has three steps: - **A→B** is adiabatic and reversible, so Q = 0 and ΔU_AB = −W₁. Here W₁ is the work done by the gas during this expansion. - **B→C** is isobaric (horizontal line). - **C→A** is isothermal and reversible, so ΔU_CA = 0. Over the full cycle the internal energy returns to its...
Which $\Delta\mathrm{H}$ in the image represents the integral heat of dilution:() <ImageHere> A、$\Delta\mathrm{H}_{1}$ B、$\Delta\mathrm{H}_{2}$ C、$\Delta\mathrm{H}_{3}$ D、$\Delta\mathrm{H}_{4}$
C
选择题_31.json
Selection_9_1.png
**Answer: C, ΔH₃** The graph plots the molar enthalpy of solution, ΔH°ₘ, against the moles of solvent H₂O added. The integral heat of dilution is the enthalpy change when a solution is diluted from one concentration to another. On the graph, this is the vertical difference between two points on the curve. ΔH₃ spans th...
Observe the $\mathrm{p}-\mathrm{V}$ diagram of the ideal gas and identify which of the following statements is incorrect? <ImageHere> A. For the process $\mathrm{C}\rightarrow\mathrm{A}$, $\Delta\mathrm{U}=0$ B. The process $\mathrm{A}\rightarrow\mathrm{B}$ is an adiabatic reversible process C. The process $\mathrm{B}...
C
选择题_31.json
Selection_10_1.png
**Answer: C** - **A is correct.** The process C→A is isothermal (ΔT = 0). For an ideal gas, U depends only on T, so ΔU = 0. - **B is correct.** The process A→B has ΔS = 0 and is reversible, so it is adiabatic and reversible (isentropic). - **C is incorrect.** B→C is isobaric (Δp = 0), and the volume increases, so the ...
For an ideal gas undergoing a reversible cyclic process, the $\mathrm{p}-\mathrm{V}$ diagram is shown below. Which corresponding $\mathrm{S}-\mathrm{T}$ diagram should it be?() <ImageHere>
A
选择题_31.json
Selection_11_1.png
**Answer: A** **Process analysis on the p–V diagram:** - **M₁ → M₂ (isothermal, at T_high):** The gas expands and absorbs heat, so entropy increases, S₂ > S₁. This is a vertical segment going up on the S–T plot. - **M₂ → M₃ (isochoric):** Pressure drops at constant volume, so temperature falls from T_high to T_low. H...
There are two ways for the state $\mathrm{A}\rightarrow\mathrm{B}$ transition: Path 1: Reversible process, entropy change $\Delta\mathrm{S}_{1}$ Path 2: Irreversible process, entropy change $\Delta\mathrm{S}_{2}$ Among the four equations shown in the image below, which are correct? <ImageHere> A, 2 B, 2, 3 C, 2, 3, 4 ...
B
选择题_31.json
Selection_12_1.png
**Answer: B (equations 2 and 3)** - **Equation 1 is wrong.** The sum of δQ/T along the reversible path 1 equals ΔS₁. The sum along the irreversible path 2 (with the actual heat exchanged) is not the same as the reversible sum, so the two sums are not equal. - **Equation 2 is correct.** For a reversible process, ΔS₁ =...
At $20^{\circ}\mathrm{C}$, the equilibrium pressure of some desiccants with water vapor is as follows: <ImageHere> At the same temperature: $\mathrm{Na}_{2}\mathrm{B}_{4}\mathrm{O}_{7}\cdot10\mathrm{H}_{2}\mathrm{O}(saturated)=\mathrm{Na}_{2}\mathrm{B}_{4}\mathrm{O}_{7}\cdot9\mathrm{H}_{2}\mathrm{O}(\mathrm{s})+\mathr...
C
选择题_31.json
Selection_13_1.png
**Answer: C. NaBr (saturated)** **Reasoning:** Borax decahydrate loses water (deteriorates) if the water vapor pressure in its environment falls below the equilibrium pressure of its dehydration reactions. The lower of the two given values is 912 Pa, the pressure at which Na₂B₄O₇·10H₂O(s) begins converting to Na₂B₄O₇·...
The saturated vapor pressure of propanol ($\mathrm{A}$) is $2.9\mathrm{kPa}$ and of water ($\mathrm{B}$) is $3.17\mathrm{kPa}$ at $25^{\circ}\mathrm{C}$. When $\mathrm{x}_{\mathrm{B}}=0.6$, $\mathrm{p}_{\mathrm{A}}=2.07\mathrm{kPa}$ and $\mathrm{p}_{\mathrm{B}}=2.65\mathrm{kPa}$. The $\mathrm{T}-\mathrm{X}$ of this two...
B
选择题_31.json
Selection_15_1.png
**Answer: B** **Check for deviation from Raoult's law.** At $x_B = 0.6$ (so $x_A = 0.4$), an ideal solution would have total pressure $$p_{\text{ideal}} = x_A p_A^* + x_B p_B^* = 0.4(2.9) + 0.6(3.17) = 3.06\ \text{kPa}$$ The measured total pressure is $$p_{\text{total}} = p_A + p_B = 2.07 + 2.65 = 4.72\ \text{kPa}$...
The graph below shows the change in concentrations of substances G, F, and B over time. Which corresponding series of reactions is it? <ImageHere> A、$\mathrm{G}\longrightarrow\mathrm{F}\longrightarrow\mathrm{B}$ B、$\mathrm{B}\longrightarrow\mathrm{F}\longrightarrow\mathrm{C}$ C、$\mathrm{G}\longrightarrow\mathrm{B}\lon...
C
选择题_31.json
Selection_16_1.png
**Answer: C, G → B → F** - **G** starts at its highest concentration and decreases steadily, so it is the reactant. - **B** starts at zero, rises to a maximum, and then falls. A substance that is formed and then consumed is an intermediate. - **F** starts at zero and increases continuously without falling, so it is th...
In the phase diagram of the following condensed system formed by components $\mathrm{A}$ and $\mathrm{B}$ (with constant $\mathrm{P}$), the system that forms both stable and unstable compounds is ()<ImageHere>
C
选择题_31.json
Selection_17_1.png
**Answer: D** **Why:** A compound that melts congruently (its melt has the same composition as the solid) gives a maximum on the liquidus curve, so it is stable. A compound that decomposes before melting (incongruent melting) gives a peritectic horizontal line, so it is unstable. - **A:** No maximum on the liquidus, ...
As shown in the figure, in an adiabatic water-containing container, there is an immersed resistance wire through which current is passed for a period of time. Considering the resistance wire as the system, the signs of the values $\mathrm{Q}$ and $\mathrm{W}$ (with work done on the system by the environment being posit...
B
选择题_31.json
Selection_18_1.png
**Answer: B** ($W>0$, $Q<0$, $\Delta U>0$) Taking the resistance wire as the system: - **W > 0:** The current does electrical work on the wire, so the environment (the battery circuit) does positive work on the system. - **Q < 0:** The wire is hotter than the surrounding water, so it gives heat to the water and loses...
An ideal gas undergoes the cyclic process $A\rightarrow B\rightarrow C\rightarrow\mathrm A$ shown in the diagram, where the AB line is an isotherm, the BC line is an isobar, and the AC line is an adiabatic line. If the absolute value of the change in internal energy $\Delta\mathrm{U}=\mathrm{U}_C-\mathrm{U}_B$ for the ...
C
选择题_31.json
Selection_19_1.png
**Answer: C (region ACEDA)** **Reasoning:** 1. **Isotherm AB:** Since AB is an isotherm, $T_A = T_B$. For an ideal gas, internal energy depends only on temperature, so $U_A = U_B$. 2. **Adiabat AC:** The process is adiabatic, so $Q = 0$ and $\Delta U_{AC} = -W_{AC}$, where $W_{AC}$ is the work done by the gas during...
List the initial concentrations and initial rate of reaction $\mathrm{A}+\mathrm{B}\rightarrow\mathrm{C}$: The rate equation for this reaction is___ <ImageHere> A, $\mathrm{r}=\mathrm{kc}_{\text{B}}$ B, $\mathrm{r}=\mathrm{kc}_{\mathrm{A}}\mathrm{c}_{\mathrm{B}}$ C, $\mathrm{r}=\mathrm{kc}_{\mathrm{A}}\left(c_{\mathrm...
D
选择题_31.json
Selection_20_1.png
**Answer: D, r = k c_A** - **Order in A:** Comparing rows 1 and 2, doubling c_A from 1.0 to 2.0 doubles the rate (0.15 → 0.30). Row 3 confirms this: tripling c_A gives 0.45, three times the initial rate. So the reaction is first order in A. - **Order in B:** Comparing rows 1, 4 and 5, changing c_B from 1.0 to 2.0 or 3...
The figure below shows the change in concentration of substances $\mathrm{G}$, $\mathrm{F}$, and $\mathrm{B}$ over time. Which sequence of reactions does this correspond to? () <ImageHere> A. $\mathrm{G}\longrightarrow\mathrm{F}\longrightarrow\mathrm{B}$ B. $\mathrm{B}\longrightarrow\mathrm{F}\longrightarrow\mathrm{C}...
C
选择题_31.json
Selection_22_1.png
**Answer: C. G → B → F** Reading the graph: - **G** starts at its highest concentration at t = 0 and decreases steadily. It is the reactant, so it is consumed first. - **B** starts at zero, rises to a maximum, then falls. A substance that rises and then falls is an intermediate, formed from G and consumed to make F. ...
As shown in Figure 1 below, for the binary phase diagram that forms a simple eutectic mixture, when the system with a composition of $\mathrm{x}$ is cooled to $\mathrm{t}{}^{\circ}\mathrm{C}$ under equilibrium, the weight ratio of the solid to liquid phases is (). <ImageHere> A、$\mathrm{W}_{s}:\mathrm{W}_{1}=ac:ab$ B、...
C
选择题_31.json
Selection_23_1.png
**Answer: C, W_s : W_l = ac : bc** At temperature t, the horizontal tie line runs from a (the liquid composition, on the liquidus) to b (the solid B-rich composition, on the solidus). The overall composition of the system is x, which sits at point c on this tie line. By the lever rule, the amount of each phase is inv...
As shown in the figure below, a simple method to measure whether the inner diameter of a capillary tube is uniform. Place a small amount of pure water in the clean capillary tube, place the capillary tube horizontally, and find that the water keeps moving to the right, indicating that() <ImageHere> A. The inner diamet...
B
选择题_31.json
Selection_27_1.png
**Answer: B.** The inner diameter is not uniform and gradually becomes thinner to the right. Water wets clean glass, so each meniscus is concave toward the air. A narrower section has a more strongly curved meniscus, which lowers the pressure in the liquid on that side (the capillary suction is larger). The liquid is ...
As shown in the figure, the phase state of equilibrium coexistence in region (5) is () <ImageHere> A、$\mathrm{L}$ B、$\mathrm{L}$+$\alpha$ C、$\mathrm{L}$+$\mathrm{S}_{\mathrm{Sn}}$ D、$\mathrm{L}$+$\mathrm{S}_{\mathrm{Ag}}$
B
选择题_31.json
Selection_28_1.png
**Answer: D, L + S_Ag** Region ⑤ lies above the horizontal peritectic line and between the Ag-rich liquidus curve and the boundary with the Ag-rich solid solution region ②. In this region the liquid coexists with the Ag-rich solid solution, S_Ag. This is my reading of the diagram's boundaries, and I did not verify it ...
The gas-liquid equilibrium phase diagrams of four binary systems are shown in the following figure. The system suitable for simultaneous separation of two components through distillation operation is () <ImageHere>
D
选择题_31.json
Selection_30_1.png
**Answer: D** Simple distillation can separate both components only if the system has no azeotrope, so the liquid and vapor curves never meet at an extremum. Each component can then be obtained pure, one at each end of the column. - **A:** The diagram shows partial miscibility with a two-liquid region. Distillation y...
Which of the following four cases is the graph of the ideal gas Carnot cycle? ()<ImageHere>
B
选择题_31.json
Selection_31_1.png
**Answer: B and C.** Both show a Carnot cycle for an ideal gas, traversed as a heat engine. A and D are the same cycle run in reverse. **Key facts:** - A Carnot cycle has two isotherms and two adiabats (isentropes). - For an ideal gas, U = nC_V T depends only on T. So isotherms are lines of constant U, and adiabats ar...
A system proceeds from the same initial state to the same final state through three different paths: A, B, and C. Among them, A and B are reversible paths, and C is an irreversible path. The following are seven equations about the entropy change $\Delta\mathrm{S}$ of the system ($\mathrm{Q}_{\mathrm{A}}$, $\mathrm{Q}_{...
D
选择题_31.json
Selection_32_1.png
**Answer: D, (5) and (7)** For a state function like entropy, ΔS depends only on the initial and final states, and the Clausius relation applies to reversible paths. - **(1) ΔS_A = ΔS_B** is correct, since both paths share the same initial and final states. - **(2) ΔS_B = ΔS_C** is correct, for the same reason. - **(...
As shown in the figure, the incorrect statement about the following diagram is: () <ImageHere> A. Any point on the curve represents the integral heat of solution at the corresponding concentration B. $\Delta\mathrm{H}_{1}$ represents the integral heat of solution at infinite dilution C. $\Delta\mathrm{H}_{2}$ represen...
D
选择题_31.json
Selection_33_1.png
**Answer: D** The figure plots the integral heat of solution, $\Delta_{\text{sol}}H_m(\text{HCl})$, against $n$ (mol H₂O per mol HCl). - **A is correct.** Each point on the curve gives the integral heat of solution at that concentration. - **B is correct.** $\Delta H_1$ is the plateau the curve approaches as the solu...
The diagram below is a p-V diagram for a certain gas. In the diagram, process A→B is an isothermal reversible process, A→C is an adiabatic reversible process, and A→D is a polytropic irreversible process. The volumes of states B, C, and D are equal. Which one of the following relationships is incorrect?() <ImageHere> ...
B
选择题_31.json
Selection_35_1.png
**Answer: B (T_C > T_D)** Since B, C, and D share the same volume, and the gas behaves as an ideal gas (pV = nRT), temperature is proportional to pressure at that volume. The diagram shows P_B > P_D > P_C, so T_B > T_D > T_C. Checking each option: - **A. T_B > T_C** is correct. A→B is isothermal, so T_B = T_A. A→C i...
According to the diagram of the composition of escape degree one, the following expression is incorrect:() <ImageHere> A. The dashed line Ba meets $\mathrm{f}_{A}=\mathrm{f}_{A}^{*}\mathrm{x}_{A}$ B. The dashed line $Ab^{\prime}$ meets $\mathrm{f}_{B}=\mathrm{k}_{B}\mathrm{x}_{B}$ C. The dashed line ab meets $\mathrm{...
C
选择题_31.json
Selection_36_1.png
**Answer: C** Reading the diagram: a is the point on the f axis at x_B = 0 with height f_A*. Point b sits at x_B = 1, on the Raoult line for B, so its height is f_B*, not k_B. The dashed line ab therefore represents f = f_A*x_A + f_B*x_B, not f = k_B x_B + f_A*x_A. The other options check out: - **A:** The line from ...
In this fugacity composition diagram, which of the following point descriptions is incorrect:() A, point a is an imaginary reference point, $\mathrm{x}_{A}=1$, $\mathrm{f}_{A}=\mathrm{k}_{A}$ B, point c follows Raoult's law. $\mathrm{f}_{A}=\mathrm{f}_{A}^{*}\mathrm{x}_{A}=\mathrm{f}_{A}^{*}\mathrm{a}_{A}$ C, point d...
C
选择题_31.json
Selection_37_1.png
**Answer: C** Point d lies on the Raoult's-law curve for A near the pure-A end (x_A → 1), so it is governed by f_A = f_A*·x_A. It is not a Raoult's-law point for B. Near x_B = 0, the B curve follows Henry's law (f_B = k_B·x_B), not Raoult's law (f_B = f_B*·x_B). The other statements are consistent with the diagram: -...
From the flux-velocity-angle distribution diagram in the center-of-mass coordinate system, the scattering diagram for the reaction $\mathrm{O}_{2}^{+}+\mathrm{D}_{2}\rightarrow\mathrm{O}_{2}\mathrm{D}^{+}+\mathrm{D}$ can be obtained, and the product flux is near the 'equator', from which it can be obtained: <ImageHere...
forward-backward (or front and back symmetric, isotropic), linear, long
填空题_28.json
Fill_blank_1_1.png
**Answers (based on the sideways-scattering pattern in the diagram):** 1. **Complex-forming (long-lived complex) scattering.** Products emerge roughly perpendicular to the incident beam, with forward-backward symmetry. The complex lives long enough to rotate and lose memory of the incoming direction, so the products s...
Fill the capillary with a wetting liquid, as shown in the figure below. When the left end of the capillary is heated, the liquid in the tube moves to the ___ side; if a non-wetting liquid is filled in the capillary, as shown in the figure on the right, when the left end of the capillary is heated, the liquid in the tub...
to the right, to the left
填空题_28.json
Fill_blank_2_1.png
**Answers: (a) toward the heated (left) side; (b) toward the unheated (right) side.** This is the standard thermocapillary result. For a wetting liquid, the liquid is drawn toward the heated end. For a non-wetting liquid, it is pushed away from the heated end. The direction follows from how the gas and the liquid film...
Under a certain temperature and pressure, there are water droplets, water bubbles, and gas bubbles of the same size, with the same gaseous composition, as shown in the figure below. Their surface free energies are ___.<ImageHere>
$\mathrm{G}_{a}=\mathrm{G}_{c}\lt\mathrm{G}_{b}$
填空题_28.json
Fill_blank_3_1.png
**Answer: G_b = 2G_a = 2G_c**, so the water droplet (a) and the gas bubble in water (c) have equal surface free energy, and the water bubble (b) has twice that value. **Reasoning:** - **a (water droplet in gas):** The liquid is surrounded by gas, so there is one liquid–gas interface. Its surface free energy is G_a = ...
As shown in the image below, the tube is filled with a solution of $0.03\mathrm{mol}\cdot\mathrm{dm}^{-3}\mathrm{NaCl}$ with a gel of $\mathrm{AgCl}$ in the middle. The phenomenon observed after electrification is ___.<ImageHere>
The solution moves to the right
填空题_28.json
Fill_blank_4_1.png
**Expected observation:** The AgCl particles migrate toward the positive electrode (+), so the AgCl-containing region becomes denser or more turbid on the (+) side, while the region near the (−) electrode becomes clearer. **Reasoning:** In excess NaCl, the AgCl particles preferentially adsorb Cl⁻ ions from the solutio...
Fill in the substances that exist (or coexist in equilibrium) in each phase region under the condensed system phase in the diagram: Phase region $\mathrm{Ⅰ}$___, Phase region $\mathrm{Ⅱ}$___, Phase region $\mathrm{Ⅲ}$___, Phase region $\mathrm{Ⅳ}$___, Phase region $\mathrm{Ⅴ}$___.<ImageHere>
Solid solution of $\mathrm{B}$ in $\mathrm{A}$ $\alpha$, liquid solution of $\mathrm{A}$ and $\mathrm{B}$, solid solution of $\mathrm{A}$ in $\mathrm{B}$ $\beta$, two solid solution mixtures $\alpha+\beta$, liquid solution + $\beta$
填空题_28.json
Fill_blank_5_1.png
The diagram is a two-component (A–B) system with partial solid solubility. Reading each region from its boundaries: - **Phase region I** (between AC, CF and AH, left of the solid-solution boundary): **α** (solid solution rich in A), a single solid phase. - **Phase region II** (above liquidus CED): **l** (liquid soluti...
Acetonitrile ($\mathrm{A}$) - water ($\mathrm{B}$) - ether ($\mathrm{C}$) ternary liquid-liquid phase diagram at a certain temperature is shown in Figure 1. There are ___ two-phase regions in this phase diagram. <ImageHere>
3
填空题_28.json
Fill_blank_6_1.png
**Answer: 3** In a ternary liquid-liquid phase diagram, the single-phase (homogeneous) region is usually shaded, and the two-phase (heterogeneous) regions appear as separate closed areas inside the triangle. In Figure 1, the black area is the connected single-phase region. The white lobes are the two-phase regions: on...
At $\mathrm{T}$, the decomposition data of a certain compound in solution is measured as shown in the table below: <ImageHere> Then the order of this chemical reaction is ___ order.
3
填空题_28.json
Fill_blank_7_1.png
The reaction is **third order**. For an nth-order reaction, the half-life depends on the initial concentration as $t_{1/2} \propto c_0^{\,1-n}$. So the order can be found from how $t_{1/2}$ changes with $c_0$. Using the first two data points: $$\frac{t_{1/2,1}}{t_{1/2,2}} = \frac{4280}{885} \approx 4.84, \qquad \fra...
$\mathrm{A}$, $\mathrm{B}$, and $\mathrm{C}$ are octahedral cobalt complexes in the form of chlorides, where $\mathrm{Cl}^{-}$ is the only anion present. Among them, two contain $\mathrm{NO}_{2}$, and $\mathrm{A}$, $\mathrm{B}$, and $\mathrm{C}$ all contain $\mathrm{NH}_{3}$. The molar conductivity data of complexes $\...
$[\mathrm{Co}(\mathrm{NH}_{3})_{5}(\mathrm{NO}_{2})]\cdot\mathrm{Cl}_{2}$, $[\mathrm{Co}(\mathrm{NH}_{3})_{6}]\cdot\mathrm{Cl}_{3}$, $[\mathrm{Co}(\mathrm{NH}_{3})_{4}(\mathrm{NO}_{2})_{2}]\cdot\mathrm{Cl}$
填空题_28.json
Fill_blank_8_1.png
## Answer **A:** [Co(NH₃)₄(NO₂)₂]Cl **B:** [Co(NH₃)₅(NO₂)]Cl₂ **C:** [Co(NH₃)₄Cl₂]Cl ## Reasoning **Extrapolating λ∞ from the Onsager equation** (λₘ = λₘ^∞ − b√c, so the intercept at c → 0 gives λₘ^∞): | Complex | λₘ at c = 0.00391 / 0.00781 / 0.01562 | Approximate λₘ^∞ | Electrolyte type | |---|---|---|---| | A ...
Fill in the missing quantum numbers in the combination of quantum numbers describing the following 4 electrons. <ImageHere>
A positive integer $\geqslant3$, 1, $+\frac{1}{2}$ or $\frac{-1}{2}$, 0
填空题_28.json
Fill_blank_9_1.png
**Rules:** n = 1, 2, 3, …; l = 0 to n−1; m = −l to +l; m_s = ±1/2. **(a)** l = 2 requires n > 2, so **n = 3** (the lowest allowed value; any n ≥ 3 is consistent with the given data). **(b)** n = 2 allows l = 0 or 1. Since m = −1 requires |m| ≤ l, we need l ≥ 1, so **l = 1**. **(c)** n = 4, l = 2, m = 0 are all allow...
As shown in the figure, it is a simple cubic lattice cell, in which the plane index of the ABC plane is ___, and the crystal direction index of AD is ___.<ImageHere>
(101)、$[\overline{1}11]$
填空题_28.json
Fill_blank_10_1.png
**Answers:** the ABC plane is **(0 1̄ 1)** (equivalently (0 −1 1)), and the direction AD is **[111]**. **Coordinates.** Take A as the origin, with the x-axis along AC, the y-axis from the front face toward the back, and the z-axis vertically up. Then: - A = (0, 0, 0), front bottom-left - C = (1, 0, 0), front bottom-ri...
As shown in the figure is a part of the A-B-C ternary system composition triangle, where the composition of alloy $\mathrm{X}$ is ___. <ImageHere>
$20\%\mathrm{A}-40\%\mathrm{B}-40\%\mathrm{C}$
填空题_28.json
Fill_blank_11_1.png
**Alloy X ≈ 20% A, 40% B, 40% C** (written as A₂₀B₄₀C₄₀). I read this from the figure by estimating the point's position relative to the three edges, so the values are approximate. The point lies on the horizontal grid line for B = 40%, and its position along that line corresponds to about 20% A and 40% C.
As shown in the figure, there are 3 types of dilute solutions of non-electrolytes, their concentrations are $A\gt B\gt C$, then their vapor pressure curve is ___; (2) If their freezing point depression order is $C\gt B\gt A$, then their vapor pressure curve is ___.<ImageHere>
b、c
填空题_28.json
Fill_blank_12_1.png
**Answers: (1) (b); (2) (c).** **Reasoning:** - By Raoult's law, adding a non-volatile solute lowers the solvent's vapor pressure, and the more concentrated the solution, the lower the vapor pressure. - The vapor pressure of any liquid or solution increases with temperature, so curves that slope downward (a and d) ar...
The data of ionization energies of elements X, Y, Z at various levels are shown in the table. <ImageHere> Table 11-3-3 Data of ionization energies of elements at various levels (1) The element that forms covalent chlorides is ___; (2) The element that forms ionic chlorides is ___; (3) The element that forms a +3 ox...
Z, Y, X
填空题_28.json
Fill_blank_13_1.png
**Identifying the elements from the jumps in ionization energy:** - **X:** The large jump occurs between I₃ (2730) and I₄ (12055), so X has 3 valence electrons. It is a Group 13 element (Al). - **Y:** The large jump occurs between I₁ (495) and I₂ (4563), so Y has 1 valence electron. It is a Group 1 element (Na). - **Z...
Name the compound <ImageHere> :___.
$(3\mathrm{R},4\mathrm{R})-2,3-dimethyl-4-isopropylheptane$
填空题_28.json
Fill_blank_14_1.png
**Name: (S)-3-Ethyl-2,3,4,4-tetramethylpentane**, i.e., (3S)-3-ethyl-2,3,4,4-tetramethylpentane (C₁₁H₂₄). **How I got it:** 1. **Read the Newman projection.** The front carbon carries CH₃ and two H's, so it is a CH₂ of an ethyl group. The back carbon carries C(CH₃)₃ (tert-butyl), CH₃, and CH(CH₃)₂ (isopropyl). The ba...
In the experiment of titrating $\mathrm{Fe}^{2+}$ with a $\mathrm{KMnO}_{4}$ standard solution, if photometry is used to determine the endpoint, which of the following absorbance change curves (choose from Figure 3-1) do you think is most reasonable: ___; and what about when $\mathrm{EDTA}$ is used to titrate $\mathrm{...
A, B
填空题_28.json
Fill_blank_15_1.png
**Fe²⁺ with KMnO₄ (photometric endpoint): A.** Fe²⁺ and Mn²⁺ are essentially colorless, but MnO₄⁻ is purple and absorbs. Before the equivalence point the absorbance stays near zero. After the equivalence point, excess MnO₄⁻ accumulates and the absorbance rises, giving a flat-then-rising curve. **EDTA titration of Fe–s...
A diffusion process: The relationship between $\ln\mathrm{D}$ and $\frac{1}{T}$ is shown in the figure. This diffusion belongs to a ___ diffusion process. The slopes of the segments in the figure are respectively (1) ___ (2) ___ (3) ___. The diffusion types represented by each segment are (1) ___ (2) ___ (3) ___. <Imag...
Vacancy diffusion of non-stoichiometric compounds under hypoxic conditions, $-\frac{\Delta H_{m}+\Delta H_{f}/2}{R}$, $-\frac{\Delta H_{m}+\Delta H_{0}/3}{R}$, $-\frac{\Delta H_{m}}{R}$, intrinsic diffusion, non-stoichiometric diffusion, non-intrinsic diffusion or impurity diffusion
填空题_28.json
Fill_blank_16_1.png
**Answers (with the standard interpretation for an ionic crystal):** **Type of process:** A thermally activated (Arrhenius-type) diffusion process. The straight-line segments on the lnD vs. 1/T plot follow lnD = lnD₀ − Q/(RT). **Slopes:** The slope of each segment equals −Q/R, where Q is the activation energy for tha...
Which of the following graphs is the polarization voltage curve of differential pulse polarography ___, which corresponds to which polarogram ___, the reason for the improved sensitivity of this method compared to classical polarography is ___.<ImageHere>
d, h, it not only eliminates the influence of capacitive currents but also reduces capillary noise to a very low level
填空题_28.json
Fill_blank_17_1.png
**Answers: (d), (h), and the background-cancellation effect of the differential measurement.** 1. **Voltage waveform: (d).** Differential pulse polarography applies small, constant-amplitude pulses (about 50 mV) superimposed on a slow linear potential ramp. Graph (d) shows this pattern. Graph (c) is a staircase wavefo...
Two chromatographic columns of equal length have the following Van Deemter constants: <ImageHere> (1) If the carrier gas flow rate is $0.50\mathrm{cm}\cdot\mathrm{s}^{-1}$, which column has a larger number of theoretical plates?___ (2) What is the optimal flow rate for column 1? ___
Same, $1.3\mathrm{cm}\cdot\mathrm{s}^{-1}$
填空题_28.json
Fill_blank_18_1.png
**(1) The two columns have the same number of theoretical plates.** The Van Deemter equation is H = A + B/u + Cu. At u = 0.50 cm·s⁻¹: - Column 1: H₁ = 0.18 + 0.40/0.50 + 0.24 × 0.50 = 0.18 + 0.80 + 0.12 = 1.10 cm - Column 2: H₂ = 0.05 + 0.50/0.50 + 0.10 × 0.50 = 0.05 + 1.00 + 0.05 = 1.10 cm Both columns have the sam...
Given <ImageHere> At the same temperature (1) The forward reaction that is endothermic is ___; (2) The reaction that releases the most heat is ___; (3) The reaction with the largest forward reaction rate constant is ___; (4) The reaction with the greatest reversibility is ___; (5) The reaction whose forward rate cons...
A, D, B, B, A
填空题_28.json
Fill_blank_19_1.png
**Answers:** 1. **A**. Its forward activation energy (70) exceeds its reverse activation energy (20), so ΔH = 70 − 20 = +50 kJ·mol⁻¹ > 0. Every other reaction has a negative ΔH. 2. **D**. Its ΔH = 20 − 80 = −60 kJ·mol⁻¹ is the most negative, so it releases the most heat. 3. **B**. A smaller forward activation energy...
For the reaction $2\mathrm{A}(\mathrm{g})+\mathrm{B}(\mathrm{g})\rightarrow3\mathrm{C}(\mathrm{g})$, the concentrations of $\mathrm{A}$ and $\mathrm{B}$ ($\mathrm{mol}\cdot\mathrm{dm}^{-3}$) and the initial reaction rate $\mathrm{v}\left(\mathrm{mol}\cdot\mathrm{dm}^{-3}\cdot\mathrm{s}^{-1}\right)$ are as follows: <Im...
0,2、$k[c(\mathrm{B})]^{2}$、$\mathrm{v}=\frac{1}{3}\frac{\mathrm{d}(C)}{\mathrm{dt}}=\mathrm{k}[\mathrm{c}(\mathrm{A})]^{2}[\mathrm{c}(\mathrm{B})]$
填空题_28.json
Fill_blank_20_1.png
**Reaction orders:** 0 with respect to A and 2 with respect to B. - Experiments (1) and (2): c(A) is constant and c(B) doubles, while the rate rises from 2.0×10⁻⁴ to 8.0×10⁻⁴ (×4). So the order in B is 2. - Experiments (2) and (3): c(B) is constant and c(A) increases by 1.5×, but the rate does not change. So the order...
In the generation of 5-HMF, which produces a larger peak area at 500°C, glucose or mannose? Picture information is shown as follows: <ImageHere>
At 500°C, mannose produces a larger 5-HMF peak area than glucose.
统计图问答_30.json
SC_1.jpg
**Mannose** produces the larger 5-HMF peak area at 500°C. In Fig. 2(a), the mannose bar is about 1.15 × 10⁸, while the glucose bar is about 7 × 10⁷. Mannose is also higher in the relative peak area plot (b), at roughly 14.5% versus about 7% for glucose.
In the Nucleophile Hammett Plot, which substituent has the greatest effect on the reaction rate? Image information is shown as follows: <ImageHere>
The 3-Cl substituent has the greatest effect on the reaction rate, with the lowest log(kX/kH) value.
统计图问答_30.json
SC_2.jpg
The **3-Cl** substituent has the greatest effect. Its point sits furthest from the log(kX/kH) = 0 line, at roughly -0.12, so it slows the reaction the most (about 0.75 times the rate of the unsubstituted H case). This makes sense because chlorine's electron-withdrawing character lowers the nucleophilicity of the phenox...
In the Hammett plot of graph g, which substituent has the strongest inhibitory effect on the reaction rate? Image information is as follows: <ImageHere>
The CF₃ substituent has the strongest inhibitory effect on the reaction rate, with the lowest log(kX/kH) value.
统计图问答_30.json
SC_3.jpg
The substituent with the strongest inhibitory effect on the reaction rate is **CF₃**. From the table, CF₃ has σ_para = 0.54 and log(k/k_H) = −0.4679, the most negative value of the series. Since the log(k/k_H) values fall as σ increases, the rate decreases with increasing electron-withdrawing character, and CF₃ (the s...
In reaction 2, which pre-catalyst achieved the highest yield within 9 hours? Image information is as follows:<ImageHere>
In reaction 2, pre-catalyst 1 achieved the highest yield within 9 hours.
统计图问答_30.json
SC_4.jpg
**Precatalyst 1**, (CyTyrannoPhos)₂Ni(o-tol)(Cl), gave the highest yield at 9 hours in Reaction 2, at roughly 87%. The solid bars mark the 9-hour timepoint. Precatalyst 2, (dcypf)Ni(o-tol)(Cl), reached about 64%, and precatalyst 3, (dppf)Ni(o-tol)(Cl), about 16%.
In figure d, which enzyme variant shows the highest amidation selectivity? Image information is as follows: <ImageHere>
The H64V V68A variant shows the highest amidation selectivity, reaching 75%.
统计图问答_30.json
SC_5.jpg
The **H64V V68A^b** variant shows the highest amidation selectivity, at about **75%** (blue bar). The legend labels this product class "Amination," which I'm reading as the amidation product. The next highest is H64V V68A^a at about 65%.
At different nickel loadings, which loading yields the highest at 70 minutes? Image information as follows: <ImageHere>
At 70 minutes, the yield is highest for a 10 mol% nickel loading.
统计图问答_30.json
SC_6.jpg
At 70 minutes, **20 mol% Ni(0)** gives the highest yield, at about **63%**. The 10 mol% Ni(0) run is close behind at about 60%. For the Ni(II) sources, the 10 mol% loading (about 24%) outperforms the 20 mol% loading (about 17%) at 70 minutes.
In figure a, which compound has the greatest impact on emission quenching? Image information is as follows: <ImageHere>
The combination of N-phenylglycine (1a) and OYE3 (FMNox_{ox}ox) has the greatest impact on emission quenching, showing the steepest slope.
统计图问答_30.json
SC_7.jpg
**N-phenylglycine (1a)** has the greatest effect on emission quenching. In this Stern-Volmer plot (I₀/I vs. quencher concentration), the steeper the slope, the stronger the quenching. The blue line for 1a rises from about 1.0 to about 1.8 across the concentration range, the steepest slope of the three. The **1a + OYE3 ...
In the figure, does the glucose conversion rate (red) show any significant changes as the number of uses increases? Image information is as follows: <ImageHere>
The glucose conversion rate remains stable over four uses, with no significant changes.
统计图问答_30.json
SC_8.jpg
No. The glucose conversion (red bars) stays roughly constant across the four uses: - **1st use:** about 84% - **2nd use:** about 82% - **3rd use:** about 86–87% - **4th use:** about 86% The total variation is only about 4–5 percentage points, with no consistent downward or upward trend. The catalyst's glucose convers...
In the category distribution of the database, which key type has the largest proportion? The image information is shown as follows: <ImageHere>
The N-H key type has the largest proportion, accounting for 47.2%.
统计图问答_30.json
SC_9.jpg
Based on the pie chart in Figure 2, the N–H key type has the largest proportion at **47.2%** of the database, slightly ahead of O–H at 43.7%. C–H accounts for the remaining portion of the major categories, with S–H (0.2%?), P–H, and others making up the small slices.
Which combination of descriptors has the highest R² value? Image information is as follows:<ImageHere>
The combination MACC_POC_ISL has the highest R² value.
统计图问答_30.json
SC_10.jpg
The combination with the highest R² is **MACC_POC_ISL**, at about 0.94 on the right-hand axis. It is also the descriptor set with the lowest RMSE (about 1.5).
Among the different catalysts, which catalyst has the smallest pKa prediction error? The image information is as follows: <ImageHere>
Thiourea has the smallest pKa prediction error, with the lowest RMSE and MAE values.
统计图问答_30.json
SC_11.jpg
**Thiourea** has the smallest pKa prediction error. Its bars are the lowest in the chart, with an RMSE of about 0.25 and an MAE of about 0.15. The next lowest, prolinamide, is roughly 0.36 (RMSE) and 0.23 (MAE).
How does the yield difference of substrates F and OPh vary when using a catalyst? Image information is as follows: <ImageHere>
For different ligands, substrate F mainly yields amide 3 product, while Oph substrate mainly yields aryl amine 4 product
统计图问答_30.json
SC_12.jpg
The gap between F and OPh depends on whether a catalyst is used and which one. - **Uncatalyzed, with TMS-morpholine:** F gives a high amide yield (about 76%), while OPh gives almost none (about 3%). F strongly outperforms OPh, and most of the OPh starting material is left unreacted. - **Ni/dppf catalyzed:** F still gi...
In graph a, which product reaches the highest yield at 60 minutes? Image information is as follows: <ImageHere>
In graph a, product 2a reaches the highest yield at 60 minutes.
统计图问答_30.json
SC_13.jpg
At 60 minutes, the product with the highest yield is **2a** (the red circle series), at about 47%. At 60 min the three series read approximately: - 2a: ~47% - 4a: ~33% - 2a': ~0%
In figure b, how does the yield of product 5a change throughout the reaction process? Image information is as follows:<ImageHere>
In figure b, the yield of product 5a remains close to zero for the first four hours and reaches around 40% by the seventh hour.
统计图问答_30.json
SC_14.jpg
**Yield of 5a stays near zero for the first 4 hours, then rises sharply between 4 and 7 hours.** - **0–4 h:** The yield is essentially 0% at every point (0, 1, 2, 3, and 4 h). No dinitrile 5a forms during this period. - **4–7 h:** The yield climbs to about 39% at 7 h. The curve is still rising at the last point, so th...
Comparing TS1 and TS1', which transition state has a stronger total interaction energy? The image information is as follows: <ImageHere>
The total interaction energy of TS1 is stronger, being -18.2 kcal/mol.
统计图问答_30.json
SC_15.jpg
**TS1** has the stronger total interaction energy. Its ΔE_int is **−18.2 kcal/mol**, compared with **−15.2 kcal/mol** for TS1′, a difference of about 3.0 kcal/mol. The EDA terms in panel b explain the gap. TS1 has a more favorable electrostatic term (−59.2 vs. −51.0 kcal/mol), which outweighs its larger Pauli repulsio...
What is the trend in the concentration of product 3 during the reaction process? Image information is as follows: <ImageHere>
The concentration of product 3 continuously increased before 50 minutes, started to decrease after 50 minutes, and finally stabilized around 0.05M.
统计图问答_30.json
SC_16.jpg
Product 3 (the green diamond series, the alcohol intermediate) shows a rise-then-fall trend: - **Initial formation (0 → ~40 min):** Its concentration rises rapidly from 0 M at t = 0 to a maximum of about 0.18 M at roughly 40 min. This happens as ketone 1 is consumed and converted to the alcohol. - **Decline (~40 → 300...
In DMSO-d6_66 solvent, which isomer has the highest proportion? The image information is shown as follows: <ImageHere>
In DMSO-d6_66 solvent, the f-5β isomer has the highest proportion.
统计图问答_30.json
SC_17.jpg
In DMSO‑d₆, **f‑5β** has the highest proportion, at roughly 47%. It extends from about 22% to about 69% on the stacked bar. The next largest are f‑6β (about 26%) and f‑5α (about 20%).
Which substrate has the biggest difference in yields between compounds 22 and 23 in its reaction? The image information is as follows: <ImageHere>
In the reaction of substrate 19, the yield difference between compounds 22 and 23 is the greatest, being 84% and 15% respectively.
统计图问答_30.json
SC_18.jpg
**Substrate 19** (the acetate-type ester leaving group, run with DPEphos as ligand, footnote b) shows the largest gap. Reading the chart, its branched product **22** is about 84% and the linear product **23** is about 15%, a difference of roughly 69 percentage points. The next largest gaps are substrate 21 with DPEpho...
In different solvents, which solvent has the highest conversion rate for glucose? Image information is as follows: <ImageHere>
The conversion rate of glucose in DMSO solvent is the highest, close to 100%.
统计图问答_30.json
SC_19.jpg
Based on the chart (Fig. 5), **DMSO** gives the highest glucose conversion, at roughly **98%** (C(Glu) bar). It is followed closely by MIBK/NaCl (~92%), and then DMF (~85%), NMP (~80%), sec-butanol (~64%), DMA (~65%), and water (~53%), which is the lowest. DMSO also gives the highest 5-HMF yield (~51%), so it is the b...
In which solvent is the yield of 5-HMF the lowest? Image information is as follows: <ImageHere>
In water, the yield of 5-HMF is the lowest.
统计图问答_30.json
SC_20.jpg
The 5-HMF yield is lowest in **water**, at roughly 7%. Every organic solvent in the figure gives a higher yield, with DMSO giving the highest (about 51%).
What does the trend of yield changes for products 7 and 8 indicate during the reaction process? Image information is as follows:<ImageHere>
The yields of products 7 and 8 first increase and then decrease to 0, indicating subsequent conversion to product 6.
统计图问答_30.json
SC_21.jpg
**Products 7 and 8 are transient intermediates.** Their yields first rise and then fall to nearly zero as the reaction proceeds: - **Product 7:** about 10% at 0.5 h, about 18% at 1 h, and essentially 0% at 1.5 h. - **Product 8:** about 5% at 0.5 h, about 6% at 1 h, and essentially 0% at 1.5 h. Over the same period, t...
In the 4-Bu substrate, which product has a higher yield within 20 minutes? The image information is as follows: <ImageHere>
In the 4-Bu substrate, the cross-coupling product has a higher yield within 20 minutes.
统计图问答_30.json
SC_22.jpg
For the 4-tBu substrate at 20 minutes, the cross-coupling product is clearly higher. Its yield is about 76%, while the Ullmann-coupling (homocoupling) product is only about 2%, so the cross-coupling product is the one with the higher yield by a wide margin.
Under which ligand condition is the product ee value the highest? The image information is as follows: <ImageHere>
The product ee value is the highest under the L9 condition.
统计图问答_30.json
SC_23.jpg
**L9** gives the highest ee for **3aa**, at roughly 0.78 (78% ee). It also reaches a conversion of about 0.74. The next-best ligands are L6 (ee ≈ 0.62) and L7 (ee ≈ 0.46).
In figure a, how does the yield of product 2a change when the light is turned off? The image information is as follows: <ImageHere>
When the light is turned off, the yield of product 2a remains unchanged.
统计图问答_30.json
SC_24.jpg
When the light is turned off, the yield of **2a** stops increasing and stays essentially flat. It plateaus at the value reached at the end of the preceding light-on period: - **4–8 h (light off):** stays at about 34–35% - **12–16 h (light off):** stays at about 60–61% - **20–24 h (light off):** stays at about 72% Whe...
Under the condition of 100℃, which carbohydrate has the highest HMF yield? Image information is as follows: <ImageHere>
Under the condition of 100℃, sucrose has the highest HMF yield.
统计图问答_30.json
SC_25.jpg
At 100 °C, the carbohydrate giving the highest HMF yield is **sucrose**. From Figure 5, the Sucrose (100 °C) curve rises from about 20% at the start to roughly 33% at 360 min. This is well above the glucose (100 °C) curve, which peaks near 16% around 180 min and ends near 12%, and the cellulose (100 °C) curve, which s...
Under the condition of 80℃, which carbohydrate's HMF yield fluctuates the most with the increase of time? The image information is shown as follows: <ImageHere>
Under the condition of 80℃, the HMF yield of sucrose changes the most.
统计图问答_30.json
SC_26.jpg
**Sucrose (80 °C)** shows the largest fluctuation in HMF yield over time. Its blue curve rises from about 32% at the first sampling point to about 44% by roughly 15 min, peaks near 44.5% at about 60 min, then drifts down to about 42% at 180 min and about 41% at 360 min. That is a swing of roughly 12 percentage points,...
As the concentration of CaCl2 increases, which sugar's proportion increases the most? Image information is as follows: <ImageHere>
The proportion of fructose increases the most.
统计图问答_30.json
SC_27.jpg
**Fructose** increases the most. Its share of the product grows as CaCl₂ concentration rises, while glucose's share falls. Approximate values read from the chart: | Temp. | CaCl₂ 17.9% | CaCl₂ 25.6% | CaCl₂ 37.8% | |---|---|---|---| | 20 °C | ~5% | ~13% | ~17% | | 80 °C | ~20% | ~25% | ~33% | | 120 °C | ~18% | ~24% |...
Among the factors promoting anti-Marski amination palladation, which energy term has the greatest effect? Image information is as follows:<ImageHere>
The steric effect (ΔΔEsteric​) has the greatest impact, at 8.1 kcal/mol.
统计图问答_30.json
SC_28.jpg
Steric effects (ΔΔE_steric) have the greatest effect. In the pie chart of Figure 7, the steric term is +8.1 kcal/mol, the largest magnitude of the four components and the only one that favors anti-Markovnikov aminopalladation. The other terms all favor Markovnikov aminopalladation: electrostatic (−2.5), orbital (−2.8),...
Which mutant has the highest yield of IEUG in the 72-hour conversion? Image information is as follows: <ImageHere>
S394V-EUGO5X has the highest yield of IEUG in the 72-hour conversion.
统计图问答_30.json
SC_29.jpg
**S394V-EUGO5X** has the highest IEUG yield at 72 h, at roughly 94%. Its green (IEUG) segment runs from about 0% to about 94%, with little 4PG remaining and only small H4PG and HPMP fractions. The next highest is S394A-EUGO5X at about 74%.
In the relationship between metal electronegativity and yield, which support material's electronegativity corresponds to the highest yield? The image information is shown as follows: <ImageHere>
The electronegativity of Al2O3 corresponds to the highest yield.
统计图问答_30.json
SC_30.jpg
The highest yield, about 80%, occurs with **Al₂O₃** as the support. Its support metal has an electronegativity of about **1.6**, the peak of the open-circle yield curve.
Compound (A). The molecular formula is $\mathrm{C}_{12}\mathrm{H}_{26}\mathrm{O}_{4}$. The $\mathrm{IR}$ spectrum and $\mathrm{{}^{1}HNMR}$ spectrum of (A) are shown in Figures 10-18 and 10-19, respectively. Try to deduce the reasonable structure of (A). <ImageHere>
The unsaturation degree of (A) is 5. The molecule may contain a benzene ring. Strong absorption near $1750\mathrm{cm}^{-1}$ in the $\mathrm{IR}$ spectrum (Figure 10-18) indicates the presence of a carbonyl group in the molecule. Above $3100\mathrm{cm}^{-1}$: no obvious absorption indicates the absence of hydroxyl or ca...
简答题-24.json
QA_Answer_question_1_1.png
## Proposed structure of (A): 1,1,4,4-tetraethoxybutane, (EtO)₂CH–CH₂CH₂–CH(OEt)₂ This assignment is tentative. The integration ratios in the figure are only approximately matched, so I could not confirm the structure from the spectrum alone. **1. Degrees of unsaturation** DBE = (2·12 + 2 − 26)/2 = 0, so there are n...
There are two ester molecules with the formula $\mathrm{C}_{10}\mathrm{H}_{12}\mathrm{O}_{2}$, and their ${}^{1}\mathrm{H}NMR$ spectra are shown in the figure, write down the structural formulas of these two esters. <ImageHere>
a、[#smiles#]CCC(OCC1=CC=CC=C1)=O[#smiles#] b、[#smiles#]CC(OC(C1=CC=CC=C1)C)=O[#smiles#]
简答题-24.json
QA_Answer_question_2_1.png
## Answer **Spectrum a: methyl 3‑phenylpropanoate**, C₆H₅CH₂CH₂COOCH₃ **Spectrum b: benzyl propanoate**, CH₃CH₂COOCH₂C₆H₅ ## Reasoning For C₁₀H₁₂O₂, the degree of unsaturation is (2·10 + 2 − 12)/2 = 5. A benzene ring accounts for 4 and the ester C=O for 1, so both molecules contain a monosubstituted benzene ring an...
Point out the empirical formula of the compound formed in each of the following diagrams, and indicate which phases compose each phase region? (1) In Diagram I, assume the compound formed is $\mathrm{X}$; (2) No compound; (3) In Diagram III, assume the compounds formed are $\mathrm{X}$ and $\mathrm{Y}$;<ImageHere>
(1) From Diagram I, it is known that $\mathrm{X}$ is $\mathrm{A}_{3}\mathrm{B}$. 1: $\mathrm{L}+\mathrm{A}(\mathrm{s})$;2:$\mathrm{A}(\mathrm{s})+\mathrm{A}_{3} \mathrm{B}(\mathrm{s})$;3:$\mathrm{A}_{3}\mathrm{B}(\mathrm{s})+\mathrm{L}$;4:$\mathrm{A}_{3} \mathrm{B}(\mathrm{s})+\mathrm{B}(\mathrm{s})$;5:$\mathrm{B}(\ma...
简答题-24.json
QA_Answer_question_4_1.png
## Diagram I: one compound, A₃B (congruent melting) - The compound sits at x_B = 0.25, so the formula is **A₃B**. - Regions: - **1**: l + A(s) - **2**: A(s) + A₃B(s) - **3**: l + A₃B(s) - **4**: A₃B(s) + B(s) - **5**: l + B(s) ## Diagram II: no compound This is a simple eutectic system, so there is no comp...
A compound, the structure is either $\mathrm{A}$ or $\mathrm{B}$. A partial infrared spectrum of this compound is given, try to determine its structure and explain the reason. A、[#smiles#]OC1=CC(C#N)=CC=C1[#smiles#] B、[#smiles#]O=C(N)C1=CC=CC=C1[#smiles#] <ImageHere>
The compound is B. This is because there should be a medium intensity absorption peak in the triple bond region ($2500-2000\mathrm{cm}^{-1}$) in the infrared spectrum for compound A, which does not match the given spectrum; while the peaks at $3368 and 3173\mathrm{cm}^{-1}$ correspond to the asymmetric and symmetric st...
简答题-24.json
QA_Answer_question_5_1.png
**Answer: the compound is B, the benzamide.** **Key evidence from the spectrum:** 1. **No nitrile band in A.** Compound A contains a C≡N group, which gives a sharp, medium-to-strong absorption at about 2220–2240 cm⁻¹. The spectrum is essentially flat (about 95% T) in the 2200–2250 cm⁻¹ region, so the nitrile is absen...
In the diagram below, line AB represents an isothermal reversible process, and line AC represents an adiabatic reversible process. If starting from point A and undergoing adiabatic irreversible expansion to reach $\mathrm{V}_{2}$, then the endpoint will be below C and above B, between B and C?<ImageHere>
Between B and C
简答题-24.json
QA_Answer_question_6_1.png
**Yes.** The irreversible adiabatic endpoint lies on the vertical line $V = V_2$ between B and C, above C and below B. **Reasoning:** 1. **Adiabatic, so Q = 0.** The first law gives $\Delta U = W$. Since the gas expands, $W < 0$, so $\Delta U < 0$ and the temperature falls. The final temperature is therefore below $T...
What will happen when the piston in the following system is connected on both sides? What if it's connected to the atmosphere? <ImageHere>
The small bubble becomes smaller, the large bubble becomes larger, and if connected to the atmosphere, both bubbles become smaller until the radius of curvature becomes infinite.
简答题-24.json
QA_Answer_question_7_1.png
The "piston" in the figure is really a **three-way stopcock** joining two soap bubbles of different sizes. The key fact is that a smaller bubble has a higher internal pressure. For a soap film with two surfaces, the excess pressure is about ΔP = 4γ/r, so the small bubble (left) is at higher pressure than the large one ...
There are three glass tubes a, b, and c with the same inner diameter. Tube a is inserted vertically into water, and the water level inside rises to $\mathrm{h}$, with a meniscus radius of $\mathrm{r}$. As shown in Figure 10-3, if tubes b and c are inserted vertically into water, how will the height of the water level a...
The water level inside tubes b and c rises to the mouth of the tube. The radius of the meniscus increases.
简答题-24.json
QA_Answer_question_8_1.png
**Answer: In both cases, the water height and the meniscus radius stay the same as in tube a: the height is still h and the radius is still r.** **Reasoning:** The height to which water rises in a capillary tube depends only on the liquid, the tube's inner radius, and the contact angle. It follows from balancing the s...
A glass capillary tube is inserted into water, causing the water level to rise. If the water vapor above the water surface reaches equilibrium with the liquid water, how should the water vapor pressures at the four points in the image (points 2 and 3 are at the same height) be ranked?<ImageHere>
$\mathrm{P}_{1}\gt\mathrm{P}_{2}=\mathrm{P}_{3}\gt\mathrm{P}_{4}$
简答题-24.json
QA_Answer_question_9_1.png
**Ranking: p₁ > p₂ = p₃ > p₄** 1. **Point 1** lies in the liquid at the level of the flat free surface outside the tube. Its vapor pressure is the saturated vapor pressure p₀ over a flat surface, which is the largest value here. 2. **Points 2 and 3** are in the same vapor, at the same height, so their pressures are e...
The reading scale schematic diagram on the 721 spectrophotometer is as follows: <ImageHere>Question: (1) What do the letters T and A in the diagram respectively represent? (2) What does the upper scale represent? What does the lower scale represent? (3) Why is the lower scale uneven?
(1) T represents transmittance, A represents absorbance; (2) The upper represents T transmittance, the lower represents A absorbance; (3) Because there is a relationship between A and T as $A=-\log^{T}$
简答题-24.json
QA_Answer_question_11_1.png
**(1)** T represents transmittance (透光率/透射比), the percentage of incident light that passes through the solution; A represents absorbance (吸光度). **(2)** The upper scale is the transmittance scale, T (%), running from 0 to 100 from left to right. The lower scale is the absorbance scale, A, running from ∞ on the left to ...
In a capillary tube containing some liquid, when heated at one end, in which direction do wetting and non-wetting liquids move within the capillary tube respectively<ImageHere>
When heated at the right end in the image, the wetting liquid (left image) will move to the left; while the non-wetting liquid (right image) will move to the right. This is because surface tension decreases as temperature increases, for wetting liquid (left image) the additional pressures from the two curved liquid sur...
简答题-24.json
QA_Answer_question_13_1.png
**Wetting liquid:** moves **away from the heated end**, toward the cooler end. **Non-wetting liquid:** moves **toward the heated end**. **Reasoning:** Surface tension decreases as temperature rises, so the meniscus at the hot end has a lower surface tension than the meniscus at the cool end. The liquid column is pulle...
In a capillary tube with uneven diameter, there is some liquid that can wet the tube walls (see image). Where will the liquid be at equilibrium? <ImageHere>
At the junction between the large and small tubes and within the small tube.
简答题-24.json
QA_Answer_question_14_1.png
At equilibrium, the liquid sits in the **narrow section** of the tube (the constriction), and very little or none remains in the wide parts. **Why:** For a wetting liquid, the meniscus is concave and the pressure just below it is lower than atmospheric by Δp = 2γcosθ/r. Since the narrow neck has the smaller radius r, ...
What are the principles for selecting the measurement wavelength in absorptiometry? A student has measured the absorption spectrum of a colored substance, as shown below. Which wavelength do you think is suitable for the measurement? Why? <ImageHere>
Choosing the correct measurement wavelength affects the sensitivity, accuracy, and selectivity of absorptiometry. The principle for selecting the correct measurement wavelength is 'maximum absorption, minimum interference' to improve measurement accuracy. Under the conditions of this experiment, since there are no inte...
简答题-24.json
QA_Answer_question_15_1.png
**Principles for choosing the measurement wavelength** 1. **Sensitivity:** Choose a wavelength where the substance absorbs strongly, usually the absorption maximum (λmax), so that the absorbance change per unit concentration is largest. 2. **Selectivity:** If other components in the sample absorb, choose a wavelength ...
Sophora bark contains impurities such as sophoricoside, sophoricoside B, resin, and fat-soluble pigments. The paper chromatography test results for sophoricoside and sophoricoside B are as follows: <ImageHere> Based on the paper chromatography results, design a method to extract and separate sophoricoside and sophoric...
First, use ethanol to extract the total extract, then use chloroform to extract and remove lipophilic impurities. Next, take advantage of sophoricoside B's greater lipophilicity than sophoricoside and its higher solubility in ethyl acetate to extract sophoricoside B using ethyl acetate. Finally, use n-butanol to extrac...
简答题-24.json
QA_Answer_question_16_1.png
## Reasoning from the Rf values The table lists two components: 秦皮甲素 (sophoricoside, the more polar glycoside) and 秦皮乙素 (sophoricoside B, the less polar compound). Rf reflects how strongly a compound partitions into the mobile phase, so it indicates relative solubility: | Solvent | 甲素 Rf | 乙素 Rf | What it tells us | ...
Compound $\mathrm{C}_{4}\mathrm{H}_{9}\mathrm{NO}_{3}$ reacts with metallic sodium to release $\mathrm{H}_{2}$. Its ${}^{1}\mathrm{HNMR}$ spectrum is shown in Figure 12-8. Write its structural formula.<ImageHere>
[#smiles#]CC([N+]([O-])=O)(CO)C[#smiles#]
简答题-24.json
QA_Answer_question_17_1.png
**Answer: (CH₃)₂C(NO₂)CH₂OH**, i.e., 2-methyl-2-nitro-1-propanol. **Reasoning:** 1. **Unsaturation:** For C₄H₉NO₃, the degree of unsaturation is (2·4 + 2 + 1 − 9)/2 = 1. This single unit fits a nitro group (N=O) and no ring or C=C. 2. **Active hydrogen:** Reaction with Na to release H₂ indicates an –OH group (alcoho...
As shown in Figure 10-2, there are two soap bubbles with different radii at the ends of a glass tube. If the stopcock is opened to connect them, how will the sizes of the two bubbles change? What is the situation like when they finally reach equilibrium?<ImageHere>
The larger bubble grows bigger, and the smaller bubble gets smaller. When equilibrium is reached, the smaller bubble becomes an arc with the same curvature radius as the larger bubble.
简答题-24.json
QA_Answer_question_18_1.png
This is the classic soap-bubble problem. Here is the reasoning. **Setting up the physics** A soap bubble has two surfaces (inner and outer), so its excess pressure is p = 4γ/R where γ is the surface tension of the soap film and R is the bubble radius. The smaller bubble therefore has the larger excess pressure, and...
Compound (A). The molecular formula is $\mathrm{C}_{11}\mathrm{H}_{14}\mathrm{O}_{2}$, and its infrared spectrum and nuclear magnetic resonance hydrogen spectrum are shown in Figures 9-1 and 9-2 respectively. Try to deduce the reasonable structure of (A). <ImageHere>
The unsaturation degree of compound (A) is 5, indicating that the molecule may contain a benzene ring. From the absorption peaks in Figure 9-2 at $\delta6.81\sim7.80$ and the absorption peaks in Figure 9-1 at $1600\mathrm{cm}^{-1}$, $1500\mathrm{cm}^{-1}$, it can be determined that the molecule contains a benzene ring....
简答题-24.json
QA_Answer_question_19_1.png
## Proposed structure of (A): 1-(4-methoxyphenyl)butan-1-one $$p\text{-}CH_3O\text{–}C_6H_4\text{–}CO\text{–}CH_2CH_2CH_3$$ ### 1. Degree of unsaturation For C₁₁H₁₄O₂: Ω = (2×11 + 2 − 14)/2 = 5. This fits a benzene ring (4) plus one C=O (1). No C=C or ring beyond the benzene is needed. ### 2. Infrared spectrum - The...
Compound (A). The nuclear magnetic resonance, infrared spectrum, and mass spectrum are respectively shown in Figures 7-47, 7-48, and 7-49 (a) and (b). (In Figure 7-47, the absorption peak integral curve heights are in order from smallest to largest chemical shift values: 17, 21.) Try to deduce the structure of (A). <Im...
From Figure 7-49(b), determine that $\frac{m}{z}=198$ is the molecular ion peak. Since $(M+2):M \approx 1+1$, compound (A) contains bromine. The fragment peak near $\frac{m}{z}=76$ suggests the possible presence of a benzene ring in the molecule, confirmed by the absorption peak at $\delta7.7$ in Figure 7-47. The stron...
简答题-24.json
QA_Answer_question_20_1.png
## Proposed structure: p-toluenesulfonyl chloride, 4-CH₃C₆H₄SO₂Cl This is a tentative assignment. The mass spectrum (Figure 7-49) is not described in the problem, so the molecular formula and the chlorine isotope pattern could not be checked directly. **¹H NMR (Figure 7-47)** - **δ ≈ 2.4–2.5 ppm, sharp singlet:** an ...
As shown in Figure 6.69, it is a phase diagram of the unary system of anorthite $\left(\mathrm{CaAl}_{2}\mathrm{Si}_{2}\mathrm{O}_{8}\right)$. Please answer: (1) What are the approximate melting points of hexagonal and orthorhombic anorthite? (2) Is the transformation between triclinic and hexagonal crystal forms rever...
(1) The melting point of hexagonal anorthite is approximately $1300^{\circ} \mathrm{C}$ (point B), and the melting point of orthorhombic anorthite is approximately $1180^{\circ} \mathrm{C}$ (point C). (2) The transformation between triclinic and hexagonal crystal forms is reversible. This is because when the hexagonal ...
简答题-24.json
QA_Answer_question_22_1.png
**Caveat:** I can't read the figure with full confidence, so the temperatures in (1) are rough estimates from the diagram's scale. **(1) Melting points.** Reading the temperature axis, the hexagonal form's boundary reaches the liquid region at about 1350–1400 °C, and the orthorhombic form's at about 1100 °C. The stabl...
Compound A$\left(\mathrm{C}_{10}\mathrm{H}_{13}\mathrm{NO}_{2}\right)$ is insoluble in dilute acids and bases, but can react with $\mathrm{NaOH}/\mathrm{H}_{2}\mathrm{O}$ upon heating to form B$\left(\mathrm{C}_{8}\mathrm{H}_{11}\mathrm{NO}\right)$ and sodium acetate. $\mathrm{B}$ reacts at low temperature with $\mathr...
A, [#smiles#]CCOC1=CC=C(NC(C)=O)C=C1[#smiles#] B, [#smiles#]NC1=CC=C(OCC)C=C1[#smiles#]
简答题-24.json
QA_Answer_question_25_1.png
**A is phenacetin (N‑(4‑ethoxyphenyl)acetamide):** CH₃C(=O)–NH–C₆H₄–O–CH₂CH₃ (the NH and OEt groups are *para* to each other) **B is p‑phenetidine (4‑ethoxyaniline):** H₂N–C₆H₄–O–CH₂CH₃ (para‑substituted) **Reasoning** - **Formula and hydrolysis:** A (C₁₀H₁₃NO₂) on heating with NaOH gives sodium acetate plus B (C₈...
A compound has the molecular formula $\mathrm{C}_{9}\mathrm{H}_{50}\mathrm{O}_{2}$, and one of the products of its hydrolysis is ethanol. The ${}^{13}\mathrm{C}\mathrm{NMR}$ spectrum of this compound is shown in Figure 12-6. Write down its structure. <ImageHere>
[#smiles#]O=C(OCC)C1=CC=CC=C1[#smiles#]
简答题-24.json
QA_Answer_question_26_1.png
The formula as printed, C₉H₅₀O₂, is impossible (a C₉ compound can carry at most about 20 hydrogens), so I assume it is a typo for **C₉H₁₆O₂**. This is consistent with the hydrogen count of a saturated ester. **Proposed structure: ethyl cyclohexanecarboxylate**, C₆H₁₁–COO–CH₂CH₃ - **Hydrolysis:** An ester hydrolyses t...
End of preview.

No dataset card yet

Downloads last month
20