Akinseye Abiodun Sunday
akinbabs
·
AI & ML interests
great a proffesional website with this parrameter EXPERTS
In
Steel work fabrication and Erection (Mild Steel and Stainless Steel)
Mechanical piping with cladding & lagging
Natural Gas Facilities Systems Design & Installation
New Plant and Facilities Constructions
Modification and maintenance of existing facilities
Modification and maintenance of Machines and Equipment
Equipment Installation
Electrification
Supplies in General
TABLE OF CONTENTS
1. Vision and Mission Statement
2. Health, Safety & Environmental of Statement
3. Quality Control & Assurance Statement
4. The company – Introduction & Field of activities
5. Board of Directors
6. Management/Member
7. Company Particulars
8. Registration Documents
9. Previous contracts
10. Pictures of past projects
1. VISION AND MISSION STATEMENT
OUR VISION
“Our client’s satisfaction and success are our priority and as such we will
continually strive to provide each and every Client with an extraordinary
experience, while delivering every project on time, within budget and with the
highest level of quality and professionalism. Our clients deserve nothing but
the best.
OUR MISSION
We don’t just construct; we build long lasting relationships with our client
through professionalism & honesty and be an everlasting solution provider
who will always work in line with your target.
2. HEALTH, SAFETY & ENVIRONMENTAL STATEMENT
It is the Policy of AKINBABS ENINEERING SERVICE LTD to committed to the safety and
well being of everyone involved whom our activities impact upon. Whether you work
directly or sub-contract to us, your safety is our top priority, give adequate regard to
protecting the environment and to be in good harmony with the communities in whose
places we carry out work, and also keeping good security of the work places/materials
and equipment’s
AKINBABS ENGINNEERING SERVICE LTD encourage open communication between all
members of the company when it comes to their safety. Safety in the workplace start
from the top down and management is fully committed to be continually improving our
systems and processes. If any member of the company feels at any point that they are
unsafe in the workplace, an open line of communication has been set up.
We as a company committed to maintaining a clean and hazard free workplace and to
always looking out for new hazards in the workplace. All members of staff and
management are required to report any new hazards immediately. New hazards will be
analyzed and the appropriate action be taken company wide.
Therefore, activities shall only be undertaken when a Safe manner has been established
for execution.
“No work activity shall be carried out if the work conditions/environments are
unsafe for such operations.
Signed
Miss. Zachariah Zion
Safety Officer
3. QUALITY CONTROL & ASSURANCE STATEMENT
It is the policy of AKINBABS ENGINEERING SERVICE LTD to implement all its activities
in line with all relevant international quality control and assurance standards.
Thereby ensuring that our customer’s needs and expectation are met.
The quality of our work is our best Speaker; therefore, it shall be held in high esteem
always. No works shall be executed using the shortcut approach.
The company shall on a continuous basis encourage staff training which is the core of its
strength, implement sound company strategic, visible management commitment to
quality assurance and control system.
AKINBABS ENGINEERING SERVICE LTD shall continuous on basis seek better and
improved ways of carrying out our activities.
Signed
Babawale Ibrahim
Team leader
4.0 THE COMPANY INTRODUCTION
AKINBABS ENIGINNEERING SERVICE LTD was formed to provide engineering services to the
oil and gas industry in Nigeria, with special focus on the Natural Gas Industry and the
construction industry in general and Supplies in general.
AKINBABS ENIGINNEERING SERVICE LTD was incorporated in December,2023, the experience
of our Chief Executive (Akinseye Abiodun Sunday& Babawale Ibrahim Owolabi) on related Jobs
spans the entire Ten (10) years before the existence of Company.
The Chief Executive Officer (CEO) of the company, are both graduate Engineer in Mechanical
Engineering has, before they proceed to formed the company in December, 2023 passed
through intensive training in Civil & Mechanical Engineering. His pre-qualification training also
took them into various aspect of his related to Engineering works especially Mechanical steel
fabrication and erection and piping works.
Drawing from its past experience, the company has developed its resources and expertise in
design, fabrication and construction of plants and reticulation piping and gas facilities
installation.
Subject to our CEO/Project Manager’s training, A professional technologist of about a decade and
still standing. He has been a technical man for many years in engineering, have seen him through
such a technical concern at merit engineering limited, Olam Nig ltd, technical team leader in some
complex project in engineering before he proceeds to form Akinbabs Engineering Service ltd.
FIELD OF ACTIVITIES
Multidisciplinary Engineering designs, including process designs
Based on a solid construction background, we undertake multidisciplinary engineering design,
ranging from civil, mechanical, electrical Supplies Items, Materials and Equipment both and
locally and abroad and process design in line with clients’ needs and targets.
Our designs are tailored to your budget and needs, while complying with all relevant
international specification and code of practice, in terms of quality control and assurance,
safety and operation need, and at the same time providing flexibility for future experience
expansion.
Our affiliation with other specialized companies avails us the technical support and the
strength to cope with the most complex project scenarios whatever the driving force may be.
Provision of Support Services
We also provide technical support services such as
Project Management Team
Community based manpower supply
Quality control and assurance personnel
Commissioning and start up team
Construction of New Plant and facilities
We execute construction of new plants and facilities, either on EPC basis or on joint ventures
basis. Our in-depth experience in the construction industry, flexibility of approach to project
execution, billing of Engineering, planning and management skill, quality control and assurance
methods, commissioning and start up, are our key asset.
We don’t believe in just being a contractor, but abe an everlasting solution provider
who will always work in line with your target.
Modification and maintenance of existing facilities
In the field of modification, rehabilitation, revamping and maintenance of existing facilities, we
have gained an extensive experience, with wide range of technical-know-how through the
years. Close cooperation with customers and continuous benchmarking against their needs has
driven us to meet their current plant demands, with maintenance and reduction of operating
cost as the main objective.
Natural gas facilities systems design and installation
Because Natural Gas is the fastest, cleanest and most efficient burning fossil fuel and its help in
addressing several environmental problems, such as smog, acid rain and greenhouse effect on
the environment. We are constantly improving on the various uses of natural gas.
This quest has lead us into the following area of natural gas utilization specializations
Construction of gas transmission, distribution and internal reticulation system, using
Welded steel pipelines
High density polyethylene pipe- (HDPE) using Electro fusing welding method
Fiber glass piping
Supply of Natural gas equipment (Regulators, meters, burner and other accessories)
Civil Works
We are also involved in the execution of civil engineering works, our experience includes but
not limited to Facilities Constructions- Buildings, water distribution system
Tank and Equipment Foundations
Bulk storage tank erection
Pipe supports
Steel structures and shelters
Drainage systems
Erosion control works
Roads (Both flexible and ridge pavements)
Mechanical Piping and cladding & lagging
We execute mechanical and piping work with cladding & lagging our strength in this area lies
in our core team of tested engineers who collectively has laid more than 6500km of pipelines
across various terrains be it river crossings, swamp flow lines, station piping systems in pipe
diameter of various sizes (1/2”-36)
We also execute the construction and installation of equipment, be its vessels, pump and rotary
equipment.
We have facilities to install align and commission equipment and plants
Electrical works
We execute the installation of power distribution systems, earthling and lightening protection
installation, cathodic protection system installation, cable routing and supply and installation
of cable trays and panel installation.
AKINBABS ENGINEERIN SERVICE LTD
Is a firm of young with highly talented professionals and skill technicians. The firm provides
Engineering services to its customers. These services accomplish the customer’s requirement
in terms of economy, quality and time with emphasis on safety of personnel, plants and
equipment. Nevertheless, innovation is our slogan. We are operating as Mechanical/Electrical,
Suppliers, Contractor and Consultants. We specialize in Sales, Services, Installation,
Building/facilities Services, Design, Construction Site Porter Cabin, Metal Works, cladding &
lagging Painting (Canopies & Container) etc. to Customer’s specification. As a service-oriented
company, the ultimate satisfaction of the client is always aimed at. This is done by rendering
efficient services to clients and by attending to client requirement and providing irrespective of
the constraints that may be involved.
The company carried out importation of various types of industrial engineering equipment and
spare parts from different part of the world to satisfy demand of various organizations.
MANAGEMENT TEAM
5.0 BOARD OF DIRECTORS
BABAWALE IBRAHIM O. BACHELOR OF ENGINGEERING
CHAIRMAN / CHIEF EXECUTIVE
AKINSEYE ABIODUN S. FULL TECHNOLOGY CERTIFICATE IN SCIENCE AND
TECHNOLOGY IN MECHANICAL ENGINEERING, JOHN DON BOSCO NIGERIA
AKINSEYE ABIODUN S.
A professional technologist of about a decade and still standing. He has been a
technical man for many years in engineering, have seen him through such a
technical concern at merit engineering limited, Olam Nig ltd, Akinseye Abiodun S.
was technical team leader in some complex project in engineering before he
proceeds to form Akinbabs Engineering Service ltd.
BABAWALE IBRAHIM O.
An organized, driven, hardworking well-respected and highly brilliant engineer of
many years’ experience in Engineering with an excellent educational record. He
Obtained his Higher National Diploma, (HND) from Federal Polytechnic, Ilaro,
Bachelor in Engineering from Federal university Oye Ekiti He joined Kokun
integrated Service and work as assistance engineer for few years before proceed
to joined OK Tech Nig ltd and currently project manager.
6.0 MANAGEMENT/MEMBER
Mr. Babawale Ibrahim O {Project Engineer}
Mr. Akinseye Abiodun S {Manager}
Mr. Julius Barnabas {Electrical/ Electronics}
Mr. Ismail Olamiken {Site Supervisor}
Mr. Suru Idowu {Carpentry / Masonry Supervisor}
Mr. Gbenga Abayomi {Pipe Fitting Supervisor}
Mr. Ifeanyi Azoribe {piping Supervisor}
Engr. Muhammed Ahmed {Field Assistant}
Mr. Babawale Quadria {Structural Painter}
Miss. Zachariah Zion {Safety Officer}
7.0 COMPANY PARTICULARS
CONTACT ADDRESS AND TELEPHONE
OFFICE
10, Vicmorak street, Opposite Pavic International school, Idimu/Ikotun road,
Council Lagos state.
TELEPHONE
08031597279
08161534281
08128897183
EMAIL
Akinbabsnigltd@gmail.com
BANKER
Wema Bank Plc
Dopemu
Lagos State.
TECHNICAL PARTNERS
MOGENIX ENG NIG ENTERPRISES
POWER BASE SYNERGY TECH LIMITED
OKE-TECH LIMITED
COMPANY ORGANOGRAM
MANAGING DIRECTOR
Director of Operation
Maintenance
Engineer
Mechanical
Maintenance
Engineers
Electrical/Electronics
& Instrumentation
Project Managers
Civil/ Structure
Field Clerk Store Clerk
Technicians
Executive Assistant/
Receptionist
Safety& Health
Section
8.0 REGISTRATION DOCUMENTS
9.0 Previous Contracts
S/N PROJECTS CLIENTS/SUB
CONTRACTOR
LOCATION STATUS
1. Fabrication &
Erection of nine
span of caustic soda
shield
African
fertilizer/Mogenix
Engineering
Enterprise
OGUN COMPLETED
2. Fabrication &
Erection of fifteen
span warehouse
JC NIG LTD LAGOS COMPLETED
3. Fabrication of
thirty tons
overhead Crane
JC NIG LTD OGUN COMPLETED
4. Fabrication &
Erection of Tower
3.5mx4mx12m
Midgal Steel Nig
Ltd/Mogenix
Engineering
Enterprise
OGUN COMPLETED
5. Fabrication &
installation of
chimney1mx7m
MRM/Mogenix
Engineering
Enterprise
LAGOS COMPLETED
6. Fabrication &
installation Cable
Tray
WASIL/POWER
BASE SYNERGY
LTD
SAGAMU,
OGUN
COMPLETED
7. Fabrication
&Erection of X
brazing for 19 span
warehouses
African fertilizer AGBARA COMPLETED
8. Fabrication &
Positioning of
1tons cylinder
African fertilizer AGBARA COMPLETED
Tank
9. Fabrication&
Erection of X
brazing and canopy
for glass plant
warehouse
African fertilizer AGBARA COMPLETED
10 Dismantling &
Fabrication of
Tower 12m
Midgal Steel Nig
Ltd
LAGOS COMPLETED
11 Engineering
Consultant
OK TECH NIG LAGOS ON GOING
12. Engineering
Consultant
POWER BASE
SYNERGY
LAGOS ON GOING
13 Fabrication &
installation
machine guard.
Lorna/Ok Tech
Nig
OGUN STATE COMPLETED
14 Fabrication of
supporting
platform
Godrej/Ok Tech
Nig
LAGOS COMPLETED
15 Structural skeleton
of lagging on
300,000 tons
storage tank.
AP Plc Ijora LAGOS COMPLETED
16 Fabrication and
installation of cable
tray/ladder.
Coca-Cola PLC/
ARHAVAHENERGY
LTD
LAGOS/IMO
STATE
COMPLETED
17 Fabrication and
installation access
platform of
2.5x2meter
CHI-VITAL
PLC/MILE STONE
LTD
LAGOS COMPLETED
18 Fabrication of
2x2meter storage
tank
MMR ABEOKUTA COMPLETED
19 Fabrication of
2sqm of base Tank.
Pinnacle depot Plc LAGOS COMPLETED