Low-Rank Adaptation of Large Language Models (LoRA)
Currently, LoRA is only supported for the attention layers of the UNet2DConditionalModel
. We also
support fine-tuning the text encoder for DreamBooth with LoRA in a limited capacity. Fine-tuning the text encoder for DreamBooth generally yields better results, but it can increase compute usage.
Low-Rank Adaptation of Large Language Models (LoRA) is a training method that accelerates the training of large models while consuming less memory. It adds pairs of rank-decomposition weight matrices (called update matrices) to existing weights, and only trains those newly added weights. This has a couple of advantages:
- Previous pretrained weights are kept frozen so the model is not as prone to catastrophic forgetting.
- Rank-decomposition matrices have significantly fewer parameters than the original model, which means that trained LoRA weights are easily portable.
- LoRA matrices are generally added to the attention layers of the original model. 🧨 Diffusers provides the load_attn_procs() method to load the LoRA weights into a model’s attention layers. You can control the extent to which the model is adapted toward new training images via a
scale
parameter. - The greater memory-efficiency allows you to run fine-tuning on consumer GPUs like the Tesla T4, RTX 3080 or even the RTX 2080 Ti! GPUs like the T4 are free and readily accessible in Kaggle or Google Colab notebooks.
💡 LoRA is not only limited to attention layers. The authors found that amending the attention layers of a language model is sufficient to obtain good downstream performance with great efficiency. This is why it’s common to just add the LoRA weights to the attention layers of a model. Check out the Using LoRA for efficient Stable Diffusion fine-tuning blog for more information about how LoRA works!
cloneofsimo was the first to try out LoRA training for Stable Diffusion in the popular lora GitHub repository. 🧨 Diffusers now supports finetuning with LoRA for text-to-image generation and DreamBooth. This guide will show you how to do both.
If you’d like to store or share your model with the community, login to your Hugging Face account (create one if you don’t have one already):
huggingface-cli login
Text-to-image
Finetuning a model like Stable Diffusion, which has billions of parameters, can be slow and difficult. With LoRA, it is much easier and faster to finetune a diffusion model. It can run on hardware with as little as 11GB of GPU RAM without resorting to tricks such as 8-bit optimizers.
Training
Let’s finetune stable-diffusion-v1-5
on the Pokémon BLIP captions dataset to generate your own Pokémon.
Specify the MODEL_NAME
environment variable (either a Hub model repository id or a path to the directory containing the model weights) and pass it to the pretrained_model_name_or_path
argument. You’ll also need to set the DATASET_NAME
environment variable to the name of the dataset you want to train on. To use your own dataset, take a look at the Create a dataset for training guide.
The OUTPUT_DIR
and HUB_MODEL_ID
variables are optional and specify where to save the model to on the Hub:
export MODEL_NAME="runwayml/stable-diffusion-v1-5"
export OUTPUT_DIR="/sddata/finetune/lora/pokemon"
export HUB_MODEL_ID="pokemon-lora"
export DATASET_NAME="lambdalabs/pokemon-blip-captions"
There are some flags to be aware of before you start training:
--push_to_hub
stores the trained LoRA embeddings on the Hub.--report_to=wandb
reports and logs the training results to your Weights & Biases dashboard (as an example, take a look at this report).--learning_rate=1e-04
, you can afford to use a higher learning rate than you normally would with LoRA.
Now you’re ready to launch the training (you can find the full training script here). Training takes about 5 hours on a 2080 Ti GPU with 11GB of RAM, and it’ll create and save model checkpoints and the pytorch_lora_weights
in your repository.
accelerate launch --mixed_precision="fp16" train_text_to_image_lora.py \
--pretrained_model_name_or_path=$MODEL_NAME \
--dataset_name=$DATASET_NAME \
--dataloader_num_workers=8 \
--resolution=512 --center_crop --random_flip \
--train_batch_size=1 \
--gradient_accumulation_steps=4 \
--max_train_steps=15000 \
--learning_rate=1e-04 \
--max_grad_norm=1 \
--lr_scheduler="cosine" --lr_warmup_steps=0 \
--output_dir=${OUTPUT_DIR} \
--push_to_hub \
--hub_model_id=${HUB_MODEL_ID} \
--report_to=wandb \
--checkpointing_steps=500 \
--validation_prompt="A pokemon with blue eyes." \
--seed=1337
Inference
Now you can use the model for inference by loading the base model in the StableDiffusionPipeline and then the DPMSolverMultistepScheduler:
>>> import torch
>>> from diffusers import StableDiffusionPipeline, DPMSolverMultistepScheduler
>>> model_base = "runwayml/stable-diffusion-v1-5"
>>> pipe = StableDiffusionPipeline.from_pretrained(model_base, torch_dtype=torch.float16)
>>> pipe.scheduler = DPMSolverMultistepScheduler.from_config(pipe.scheduler.config)
Load the LoRA weights from your finetuned model on top of the base model weights, and then move the pipeline to a GPU for faster inference. When you merge the LoRA weights with the frozen pretrained model weights, you can optionally adjust how much of the weights to merge with the scale
parameter:
💡 A scale
value of 0
is the same as not using your LoRA weights and you’re only using the base model weights, and a scale
value of 1
means you’re only using the fully finetuned LoRA weights. Values between 0
and 1
interpolates between the two weights.
>>> pipe.unet.load_attn_procs(lora_model_path)
>>> pipe.to("cuda")
# use half the weights from the LoRA finetuned model and half the weights from the base model
>>> image = pipe(
... "A pokemon with blue eyes.", num_inference_steps=25, guidance_scale=7.5, cross_attention_kwargs={"scale": 0.5}
... ).images[0]
# use the weights from the fully finetuned LoRA model
>>> image = pipe("A pokemon with blue eyes.", num_inference_steps=25, guidance_scale=7.5).images[0]
>>> image.save("blue_pokemon.png")
If you are loading the LoRA parameters from the Hub and if the Hub repository has
a base_model
tag (such as this), then
you can do:
from huggingface_hub.repocard import RepoCard
lora_model_id = "sayakpaul/sd-model-finetuned-lora-t4"
card = RepoCard.load(lora_model_id)
base_model_id = card.data.to_dict()["base_model"]
pipe = StableDiffusionPipeline.from_pretrained(base_model_id, torch_dtype=torch.float16)
...
DreamBooth
DreamBooth is a finetuning technique for personalizing a text-to-image model like Stable Diffusion to generate photorealistic images of a subject in different contexts, given a few images of the subject. However, DreamBooth is very sensitive to hyperparameters and it is easy to overfit. Some important hyperparameters to consider include those that affect the training time (learning rate, number of training steps), and inference time (number of steps, scheduler type).
💡 Take a look at the Training Stable Diffusion with DreamBooth using 🧨 Diffusers blog for an in-depth analysis of DreamBooth experiments and recommended settings.
Training
Let’s finetune stable-diffusion-v1-5
with DreamBooth and LoRA with some 🐶 dog images. Download and save these images to a directory. To use your own dataset, take a look at the Create a dataset for training guide.
To start, specify the MODEL_NAME
environment variable (either a Hub model repository id or a path to the directory containing the model weights) and pass it to the pretrained_model_name_or_path
argument. You’ll also need to set INSTANCE_DIR
to the path of the directory containing the images.
The OUTPUT_DIR
variables is optional and specifies where to save the model to on the Hub:
export MODEL_NAME="runwayml/stable-diffusion-v1-5"
export INSTANCE_DIR="path-to-instance-images"
export OUTPUT_DIR="path-to-save-model"
There are some flags to be aware of before you start training:
--push_to_hub
stores the trained LoRA embeddings on the Hub.--report_to=wandb
reports and logs the training results to your Weights & Biases dashboard (as an example, take a look at this report).--learning_rate=1e-04
, you can afford to use a higher learning rate than you normally would with LoRA.
Now you’re ready to launch the training (you can find the full training script here). The script creates and saves model checkpoints and the pytorch_lora_weights.bin
file in your repository.
It’s also possible to additionally fine-tune the text encoder with LoRA. This, in most cases, leads
to better results with a slight increase in the compute. To allow fine-tuning the text encoder with LoRA,
specify the --train_text_encoder
while launching the train_dreambooth_lora.py
script.
accelerate launch train_dreambooth_lora.py \
--pretrained_model_name_or_path=$MODEL_NAME \
--instance_data_dir=$INSTANCE_DIR \
--output_dir=$OUTPUT_DIR \
--instance_prompt="a photo of sks dog" \
--resolution=512 \
--train_batch_size=1 \
--gradient_accumulation_steps=1 \
--checkpointing_steps=100 \
--learning_rate=1e-4 \
--report_to="wandb" \
--lr_scheduler="constant" \
--lr_warmup_steps=0 \
--max_train_steps=500 \
--validation_prompt="A photo of sks dog in a bucket" \
--validation_epochs=50 \
--seed="0" \
--push_to_hub
Inference
Now you can use the model for inference by loading the base model in the StableDiffusionPipeline:
>>> import torch
>>> from diffusers import StableDiffusionPipeline
>>> model_base = "runwayml/stable-diffusion-v1-5"
>>> pipe = StableDiffusionPipeline.from_pretrained(model_base, torch_dtype=torch.float16)
Load the LoRA weights from your finetuned DreamBooth model on top of the base model weights, and then move the pipeline to a GPU for faster inference. When you merge the LoRA weights with the frozen pretrained model weights, you can optionally adjust how much of the weights to merge with the scale
parameter:
💡 A scale
value of 0
is the same as not using your LoRA weights and you’re only using the base model weights, and a scale
value of 1
means you’re only using the fully finetuned LoRA weights. Values between 0
and 1
interpolates between the two weights.
>>> pipe.unet.load_attn_procs(lora_model_path)
>>> pipe.to("cuda")
# use half the weights from the LoRA finetuned model and half the weights from the base model
>>> image = pipe(
... "A picture of a sks dog in a bucket.",
... num_inference_steps=25,
... guidance_scale=7.5,
... cross_attention_kwargs={"scale": 0.5},
... ).images[0]
# use the weights from the fully finetuned LoRA model
>>> image = pipe("A picture of a sks dog in a bucket.", num_inference_steps=25, guidance_scale=7.5).images[0]
>>> image.save("bucket-dog.png")
If you used --train_text_encoder
during training, then use pipe.load_lora_weights()
to load the LoRA
weights. For example:
from huggingface_hub.repocard import RepoCard
from diffusers import StableDiffusionPipeline
import torch
lora_model_id = "sayakpaul/dreambooth-text-encoder-test"
card = RepoCard.load(lora_model_id)
base_model_id = card.data.to_dict()["base_model"]
pipe = StableDiffusionPipeline.from_pretrained(base_model_id, torch_dtype=torch.float16)
pipe = pipe.to("cuda")
pipe.load_lora_weights(lora_model_id)
image = pipe("A picture of a sks dog in a bucket", num_inference_steps=25).images[0]
If your LoRA parameters involve the UNet as well as the Text Encoder, then passing
cross_attention_kwargs={"scale": 0.5}
will apply the scale
value to both the UNet
and the Text Encoder.
Note that the use of load_lora_weights() is preferred to load_attn_procs() for loading LoRA parameters. This is because load_lora_weights() can handle the following situations:
LoRA parameters that don’t have separate identifiers for the UNet and the text encoder (such as
"patrickvonplaten/lora_dreambooth_dog_example"
). So, you can just do:pipe.load_lora_weights(lora_model_path)
LoRA parameters that have separate identifiers for the UNet and the text encoder such as:
"sayakpaul/dreambooth"
.
Note that it is possible to provide a local directory path to load_lora_weights() as well as load_attn_procs(). To know about the supported inputs, refer to the respective docstrings.
Supporting A1111 themed LoRA checkpoints from Diffusers
To provide seamless interoperability with A1111 to our users, we support loading A1111 formatted LoRA checkpoints using load_lora_weights() in a limited capacity. In this section, we explain how to load an A1111 formatted LoRA checkpoint from CivitAI in Diffusers and perform inference with it.
First, download a checkpoint. We’ll use this one for demonstration purposes.
wget https://civitai.com/api/download/models/15603 -O light_and_shadow.safetensors
Next, we initialize a ~DiffusionPipeline:
import torch
from diffusers import StableDiffusionPipeline, DPMSolverMultistepScheduler
pipeline = StableDiffusionPipeline.from_pretrained(
"gsdf/Counterfeit-V2.5", torch_dtype=torch.float16, safety_checker=None
).to("cuda")
pipeline.scheduler = DPMSolverMultistepScheduler.from_config(
pipeline.scheduler.config, use_karras_sigmas=True
)
We then load the checkpoint downloaded from CivitAI:
pipeline.load_lora_weights(".", weight_name="light_and_shadow.safetensors")
If you’re loading a checkpoint in the safetensors
format, please ensure you have safetensors
installed.
And then it’s time for running inference:
prompt = "masterpiece, best quality, 1girl, at dusk"
negative_prompt = ("(low quality, worst quality:1.4), (bad anatomy), (inaccurate limb:1.2), "
"bad composition, inaccurate eyes, extra digit, fewer digits, (extra arms:1.2), large breasts")
images = pipeline(prompt=prompt,
negative_prompt=negative_prompt,
width=512,
height=768,
num_inference_steps=15,
num_images_per_prompt=4,
generator=torch.manual_seed(0)
).images
Below is a comparison between the LoRA and the non-LoRA results:
You have a similar checkpoint stored on the Hugging Face Hub, you can load it directly with load_lora_weights() like so:
lora_model_id = "sayakpaul/civitai-light-shadow-lora"
lora_filename = "light_and_shadow.safetensors"
pipeline.load_lora_weights(lora_model_id, weight_name=lora_filename)