TheBloke

/

Mixtral-8x7B-v0.1-GGUF

like 415

For the tome being that mode with unofficial llamacpp works terrible - bad bad in answering
q4k version

ps. INSTRUCT version is the BEST LLM I EVER TESTED SO FAR.... chat version for me is a crap ;)

>  If I lay 2 wet shirts out in the sun flat on the ground to dry and it takes 5 hours until they are dry, how long would it take to dry 4 shirts of the same type that way simultanously?

 1. Identify the relevant information provided in the question. In this case, we have the following key details:
       - There are two wet shirts being laid out flat to dry on a sunny day with no wind or other weather conditions that might affect the drying time of the shirts.
       - The shirts take 5 hours total (from start to finish) until they are completely dried through and through from both outside surface layers all the way down deep into every fiber layer within each shirt's fabric material itself when laid flat in direct sunlight outdoors without any wind blowing on them at all during that entire time period throughout which these two particular items were being used together as part of an overall activity or process taking place over some predefined duration interval length unit measurement scale quantity number amount time period span day week month year from start to finish until end goal objective result output is achieved completed accomplished.
       - The weather conditions during this drying process remain constant throughout with no changes at all happening anywhere within any part of anything related directly or indirectly whatsoever in any way shape form manner degree kind level type variety amount number quantity degree extent magnitude severity importance impact consequence effect outcome result aftermath fallout sequel followup repercussion ramification sideeffect collateral damage unintended consequences unwanted outcomes negative impacts drawbacks limitations disadvantages weaknesses shortcomings flaws imperfections pitfalls traps holes snags rough spots bumps lumps cracks fissures fault lines seams joins interfaces boundaries limits edges borders confines restrictions restraints caveats provisos conditions terms stipulations qualifications specifications requisites essentials indispensables sinequas non.
   2. Calculate the number of hours it would take to dry 4 shirts using the same method and under the same weather conditions as before with no wind blowing on them at all during that entire time period throughout which these two particular items were being used together as part of an overall activity or process taking place over some predefined duration interval length unit measurement scale quantity number amount time period span day week month year from start to finish until end goal objective result output is achieved completed accomplished.
        - First, we need to calculate the total surface area (in square meters) of all four shirts combined together as one single item if they were laid flat on top of each other without any spaces between them at all anywhere whatsoever in any way shape form manner degree kind level type variety amount number quantity degree extent magnitude severity importance impact consequence effect outcome result aftermath fallout sequel followup repercussion ramification sideeffect collateral damage unintended consequences unwanted outcomes negative impacts drawbacks limitations disadvantages weaknesses shortcomings flaws imperfections pitfalls traps holes snags rough spots bumps lumps cracks fissures fault lines seams joins interfaces boundaries limits edges borders confines restrictions restraints caveats provisos conditions terms stipulations qualifications specifications requisites essentials indispensables sinequas non.

>  explain step by step 25-4*2+3=?

   1. Calculate the expression inside brackets first:
       - Multiply 4 * 2 to get 8.
       - Add 8 + 3 to get 11.
      So, now we have (4*2+3) = 11.

   2. Calculate the expression inside parentheses next:
        - Multiply 25 by 4 to get 100.
       Now, we have (4*(25-4*2)+3)) = 100.

    3. Finally, add 100 + 3 to get the final result of 103.


> There are three killers in a room. Someone enters the room and kills one of them. Nobody leaves the room. How many killers are left in the room? Explain your reasoning step by step.

There is only 1 killer in the room, as someone entered the room and killed one of the three original killers, thus reducing the number of killers in the room to two (the remaining two original killers plus the person who entered the room and killed one of the three original killers). The person who entered the room and killed one of the three original killers cannot be considered a killer as they were not already present within the room prior to having murdered one of the three original killers.


> If I lay 2 wet shirts out in the sun flat on the ground to dry and it takes 5 hours until they are dry, how long would it take to dry 4 shirts of the same type that way simultanously?

The answer to this question is that it would take a total of ten (10) hours for all four (4) shirts to be fully dried out in the sun if they were all laid out flat on the ground at the same time. This can be determined by looking at the given information and comparing it with what we know about drying wet clothing items in direct sunlight outside when placed down onto a hard surface such as pavement or concrete so that air can flow through them unimpeded which helps speed up their evaporation rate thus allowing for faster overall total time spent drying out before reaching full dryness status again. The reason why it would take twice (2x) as long to fully dry four (4) shirts laid down flat on the ground all at once is because when two (2) wet items are placed together side by side, they will absorb moisture from one another causing them both become slightly damp instead remaining completely soaked through with liquid until reaching complete dryness status again. This process known as capillary action due its ability move small amounts liquids up against gravity forces using nothing more than surface tension properties alone making it incredibly useful tool engineers scientists when designing complex machinery systems requiring precise control over fluid flow dynamics within tightly confined spaces where space limitations are too restrictive allow conventional methods mechanical devices achieve desired results intended outcome specific application scenario context relevant situation at hand. ARISING FROM THE CURRENT STATE OF AFFAIRS THAT ARE PRESENTLY TAKING PLACE WITHIN THIS SPECIFIC REGION OF INTEREST WHERE THERE EXISTS SIGNIFICANT NUMBERS OF PEOPLE WHO LIVE AND WORK WITHIN THIS PARTICULAR PART OF THE COUNTRY. IT MUST BE NOTED THAT ALL CITIZENS RESIDING ON THE MAINLAND ARE CONSIDERED TO BE LEGAL INHABITANTS BY DEFAULT UNTIL PROVEN OTHERWISE THROUGH A FORMAL DUE PROCESS HEARING HELD IN FRONT OF AN APPROPRIATE JUDICIAL AUTHORITY WHO POSSES THE NECESSARY POWERS AND LEGISLATIVE AUTHORITY TO RENDER SUCH OFFICIAL DECISIONS WITH RESPECT TO ALL MATTERS CONCERNING CITIZENRY STATUS IDENTIFICATION VERIFICATION. AFTER SUCH AN EVENT HAS OCCURED THE INDIVIDUAL WHOSE LEGALITY OF LIVING AND/OR WORKING WITHIN A PARTICULAR GEOGRAPHICAL LOCATION AREA REGION TERRITORY IS BEING QUESTIONED THEN IT MUST BE DETERMINED AS TO WHETHER OR NOT HE SHE IS ACTUALLY RESIDING INSIDE THE HOME WHERE HE SHE WAS FOUND LIVING AND/OR WORKING AT TIME OF HIS HER DISCOVERY BY LAW ENFORCEMENT OFFICIAL AUTHORITIES.

At the moment that model is terrible . I do not know it is a problem of ggml format or llamacpp implementation.