id
int64 0
213
| requirement
stringlengths 28
544
| testcase
stringlengths 341
22.7k
|
---|---|---|
0 | "If following conditions are met, tuner start AF switching operation:
- AF feature is on
- The current station Signal quality is below quality_threshold.
- PI code of AF shall match to current tuned station PI code.
- The AF shall also meet the quality_threshold." | Title: AF switching
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Use France_Mobility_FM_ActiveAntenna_AF_Dourdan_24072016 (SSD10) streaming file in Lumantek signal generator for listing Alternate Frequencies
7. Alternative Frequency (AF) setting is set to 'ON'
8. Quality_Threshold for FM is set
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list
3. Select 95.4 MHz from FM station list and wait for few seconds
Expected Result:
1. FM station list shall be displayed
2. Alternate frequencies shall be available for 95.4 MHz frequency
3. Selected station shall be played and after few seconds, frequencies 95, or 94.9 or 106.5 or 87.8 shall be tuned. AF shall also meet the Quality_threshold |
1 | "Station list for FM shall offer the possibility to sort by frequency (ascending) or PS name (alphabetical).
In case of sorting by PS name, the stations that have no PS name shall be listed at the end of the list, sorted according to their frequency."
| Title: FM Station list sort - Frequency in ascending order
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Sort FM list by station name option is set to OFF in Radio settings screen
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list
Expected Result:
1. FM station list shall be displayed
2. FM station list shall be sorted by frequency in ascending order
Title: FM Station list sort - Station name in alphabetical order
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Sort FM list by station name option is set to ON in Radio settings screen
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list
Expected Result:
1. FM station list shall be displayed
2. FM station list shall be sorted by station name in alphabetical order and the stations that have no station name shall be listed at the end of the station list, sorted according to their frequency. |
2 | A valid station is define when station's meet all the quailty_threshold value which shall be set during vehicle tuning. | Title: AM Stations meets quality threshold
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. Quailty_threshold value is set for AM band
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Press Refresh option available in AM station list
3. Wait till station list update is completed
4. Play each stations from station list
Expected Result:
1. AM station list shall be displayed
2. "Station list updating..." text shall be displayed
3. Station list update shall be completed
4. Streaming audio from each AM station shall be clear, without any interferences
Title: FM Stations meets quality threshold
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. Quailty_threshold (TBD) value is set for FM band
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Press Refresh option available in FM station list
3. Wait till station list update is completed
4. Play each stations from station list
Expected Result:
1. FM station list shall be displayed
2. "Station list updating..." text shall be displayed
3. Station list update shall be completed
4. Streaming audio from each FM station shall be clear, without any interferences |
3 | Abort seek shall unmute the tuner audio. | Title: AM audio after aborting auto seek
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Press Auto Seek_Previous arrow from AM landing screen
2. Press manual Seek_Previous arrow from AM landing screen
Expected Result:
1. Auto seek down shall start and previous available station shall be played. 'Seeking.." shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
2. Auto seek down shall be aborted. Tuner audio is unmuted and last tuned frequency shall be played
Title: FM audio after aborting auto seek
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Press Auto Seek_Previous arrow from FM landing screen
2. Press manual Seek_Previous arrow from FM landing screen
Expected Result:
1. Auto seek down shall start and previous available station shall be played. 'Seeking.." shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
2. Auto seek down shall be aborted. Tuner audio is unmuted and last tuned frequency shall be played |
4 | After aborting auto seek / tuner shall be tuned to last frequency where seek get aborted. | Title: For AM band Seek operation is cancelled when seek up button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Press Auto Seek_Next arrow from AM landing screen
2. Press manual Seek_Next arrow from AM landing screen during auto seek
Expected Result:
1. Auto seek up operation is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek up operation shall be aborted and tuned to last frequency where seek is aborted
Title: AM - Autoseek cancelled when seek down button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Press Auto Seek_Previous arrow from AM landing screen
2. Press manual Seek_Previous arrow from AM landing screen during auto seek
Expected Result:
1. Auto seek down operation is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek down operation shall be aborted and tuned to last frequency where seek is aborted
Title: FM - Autoseek cancelled when seek up button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Press Auto Seek_Next arrow from FM landing screen
2. Press manual Seek_Next arrow from FM landing screen during auto seek
Expected Result:
1. Auto seek up operation is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek up operation shall be aborted and tuned to last frequency where seek is aborted |
5 | After aborting auto seek, the system shall remain on the station where seek was aborted. | Title: Tuner tuned to last frequency after aborting auto seek using seek up for DAB band
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active.
Steps:
1. Long press on next seek arrow to perform Auto seek.
2. Press next seek arrow while auto seek is in progress.
Expected Result:
1. Auto seek shall be in progress.
2. Auto seek shall be aborted and tuned to the last frequency where seek gets aborted.
Title: Tuner tuned to last frequency after aborting auto seek using seek down for DAB band
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active.
Steps:
1. Long press on next seek arrow to perform Auto seek.
2. Press previous seek arrow while auto seek is in progress.
Expected Result:
1. Auto seek shall be in progress.
2. Auto seek shall be aborted and tuned to the last frequency where seek gets aborted. |
6 | After an auto seek and once a valid station is locked in / the audio shall be unmuted | Title: AM audio muted during Auto seek up and unmuted when valid station is reached
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Press Auto Seek_Next arrow from AM landing screen
2. Wait till a valid station is reached during seeking
Expected Result:
1. Auto seek up operation shall start
2. Tuner audio shall be muted during seek, and unmuted once next available station is reached
Title: AM audio muted during Auto seek down and unmuted when valid station is reached
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Press Auto Seek_Previous arrow from AM landing screen
2. Wait till a valid station is reached during seeking
Expected Result:
1. Auto seek down operation shall start
2. Tuner audio shall be muted during seek, and unmuted once next available station is reached
Title: FM audio muted during Auto seek up and unmuted when valid station is reached
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Press Auto Seek_Next arrow from FM landing screen
2. Wait till a valid station is reached during seeking
Expected Result:
1. Auto seek up operation shall start
2. Tuner audio shall be muted during seek, and unmuted once next available station is reached
Title: FM audio muted during Auto seek down and unmuted when valid station is reached
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Press Auto Seek_Previous arrow from FM landing screen
2. Wait till a valid station is reached during seeking
Expected Result:
1. Auto seek down operation shall start
2. Tuner audio shall be muted during seek, and unmuted once next available station is reached |
7 | After cancellation of the ongoing station list update / the initial station list shall be retained | Title: AM station list manual update cancellation
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Press Refresh option available in AM station list
3. Press Cancel button from Station list update popup
Expected Result:
1. AM station list shall be displayed
2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram
3. Manual station list update is cancelled and previous AM station list is restored
Title: FM station list manual update cancellation
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Press Refresh option available in FM station list
3. Press Cancel button from Station list update popup
Expected Result:
1. FM station list shall be displayed
2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram
3. Manual station list update is cancelled and previous FM station list is restored |
8 | After completion of manual station list update / if the found valid stations are less than "NbMaxStationsInStationList" / then the remaining station in the station list shall remain empty. | Title: Station list entries after AM Manual station list update
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Press Refresh option available in AM station list
3. Wait till Station list update completes
Expected Result:
1. AM station list shall be displayed
2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram
3. Updated AM station list shall be displayed and if found valid stations are less than 100, then remaining entries shall remain empty in AM station list
Title: Station list entries after FM Manual station list update
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Press Refresh option available in FM station list
3. Wait till Station list update completes
Expected Result:
1. FM station list shall be displayed
2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram
3. Updated FM station list shall be displayed and if found valid stations are less than 150, then remaining entries shall remain empty in FM station list |
9 | After completion of manual station list update, if the found valid stations are less than 400, then the remaining station in the station list shall remain empty. | Title: Station list with empty stations is displayed when less than 400 DAB stations found
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active.
Steps:
1. Play 5B 176.640 MHz DAB station.
2. Select 'Station List Browse' icon and wait till DAB station list is displayed on screen.
3. Unplug antenna from Tuner.
4. Select 'Refresh' option to manually update the station list.
Expected Result:
1. 5B 176.640 MHz DAB station shall be playing.
2. Station list shall be displayed.
3. The audio shall be lost.
4. Entries in DAB station list remains empty when number of valid DAB stations found is less than 400 after manual station list update. |
10 | After completion of manual station list update, the system shall tune back to the current station. | Title: Current DAB station is tuned after manual station list update
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active.
- Attenuator is Plugged.
- DAB is tuned to 5A 174.928 MHz and have strong signal strength.
Steps:
1. Select 'Station List Browse' icon and wait till DAB station list is displayed on screen.
2. Select 'Refresh' option to manually update the station list.
3. Wait till updated DAB station list is displayed on screen.
4. Select 'Back' option.
Expected Result:
1. Station list shall be displayed.
2. Updated station list shall be displayed.
3. Old DAB station list shall be replaced with updated DAB station list.
4. Current DAB station 5A 174.928 MHz shall be displayed and DAB audio is resumed. |
11 | After completion of the station list update, the resulting station list shall become the current station list.
| Title: AM station list after manual update
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Press Refresh option available in AM station list
3. Wait till Station list update completes
Expected Result:
1. AM station list shall be displayed
2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram
3. Updated AM station list shall be displayed
Title: FM station list after manual update
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Press Refresh option available in FM station list
3. Wait till Station list update completes
Expected Result:
1. FM station list shall be displayed
2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram
3. Updated FM station list shall be displayed |
12 | After factory reset / the behavior shall be same as described in “tuner startupâ€. | Title: FM Band is selected by default after first start
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select a station from the list
3. Perform Factory Reset from Settings application
4. Select Radio application from Home screen
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Factory Reset has been successfully performed
4. FM Band shall be selected by default. FM landing screen shall be displayed |
13 | After tuning / the station information shall be provided by tuner when available. | Title: Station information for a valid AM station after Auto seek up
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Press Auto Seek_Next arrow from AM landing screen
2. Wait till a valid station is reached during seeking
Expected Result:
1. Auto seek up operation shall start. 'Seeking.." shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
2. Station information shall be displayed when next available station is tuned
Title: Station information for a valid AM station after Auto seek down
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Press Auto Seek_Previous arrow from AM landing screen
2. Wait till a valid station is reached during seeking
Expected Result:
1. Auto seek down operation shall start. 'Seeking.." shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
2. Station information shall be displayed when valid station is tuned
Title: Station information for a valid FM station after Auto seek up
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Press Auto Seek_Next arrow from FM landing screen
2. Wait till a valid station is reached during seeking
Expected Result:
1. Auto seek up operation shall start. 'Seeking.." shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
2. Station information shall be displayed when next available station is tuned
Title: Station information for a valid FM station after Auto seek down
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Press Auto Seek_Previous arrow from FM landing screen
2. Wait till a valid station is reached during seeking
Expected Result:
1. Auto seek down operation shall start. 'Seeking.." shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
2. Station information shall be displayed when valid station is tuned |
14 | All valid detected stations along with station information (frequency, station name, Preset stored etc.), when the station list is refreshed, shall be shown in the station list. | Title: AM station list after performing Refresh
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Press Refresh option available in AM station list
3. Wait till station list update is completed
Expected Result:
1. AM station list shall be displayed
2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram
3. Station list update shall be completed. New stations and all previously detected stations along with station information (frequency, Preset stored), shall be shown in the station list
Title: FM station list after performing Refresh
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Press Refresh option available in FM station list
3. Wait till station list update is completed
Expected Result:
1. FM station list shall be displayed
2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram
3. Station list update shall be completed. New stations and all previously detected stations along with station information (frequency, station name, Preset stored), shall be shown in the station list |
15 | At the first connect of the system with DAB source activated, the Service Announcement function shall be disabled. | Title: Default State for DAB Service Announcements setting when previously set to ON
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB landing screen is active
6. DAB Service Announcements setting is set to 'OFF'
Steps:
1. Select Settings option from DAB landing screen
2. Turn ON DAB Service Announcements settings option
3. Perform Factory Reset from Settings application
4. Select Radio application from Home screen
5. Launch DAB source from Band option
6. Select Settings option from DAB landing screen and observe DAB Service Announcements setting
Expected Result:
1. Radio settings screen shall be displayed
2. DAB Service Announcements setting shall be set to 'ON'
3. Factory Reset has been successfully performed
4. Radio application shall be displayed
5. DAB landing screen shall be displayed
6. Radio settings screen shall be displayed and by default DAB Service Announcements setting option shall be set to 'OFF'
Title: Default State for DAB Service Announcements setting when previously set to OFF
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB landing screen is active
6. DAB Service Announcements setting is set to 'ON'
Steps:
1. Select Settings option from DAB landing screen
2. Turn OFF DAB Service Announcements settings option
3. Perform Factory Reset from Settings application
4. Select Radio application from Home screen
5. Launch DAB source from Band option
6. Select Settings option from DAB landing screen and observe DAB Service Announcements setting
Expected Result:
1. Radio settings screen shall be displayed
2. DAB Service Announcements setting shall be set to 'OFF'
3. Factory Reset has been successfully performed
4. Radio application shall be displayed
5. DAB landing screen shall be displayed
6. Radio settings screen shall be displayed and by default DAB Service Announcements setting option shall be set to 'OFF' |
16 | By default / REG shall be OFF | Title: REG Configuration setting default behaviour when previously set to OFF
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Regional Mode (REG) setting is set to 'ON'
Steps:
1. Select Settings option from FM landing screen
2. Turn OFF Regional Mode (REG) settings option
3. Perform Factory Reset from Settings application
4. Select Radio application from Home screen
5. Select Settings option from FM landing screen and observe Regional Mode (REG) settings option
Expected Result:
1. Radio settings screen shall be displayed
2. Regional Mode (REG) setting shall be set to 'OFF'
3. Factory Reset has been successfully performed
4. Radio application shall be displayed
5. Radio settings screen shall be displayed and by default Regional Mode (REG) settings option shall be set to 'OFF'
Title: Regional Mode (REG) setting default behaviour
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Regional Mode (REG) setting is set to 'OFF'
Steps:
1. Select Settings option from FM landing screen
2. Turn ON Regional Mode (REG) settings option
3. Perform Factory Reset from Settings application
4. Select Radio application from Home screen
5. Select Settings option from FM landing screen and observe Regional Mode (REG) settings option
Expected Result:
1. Radio settings screen shall be displayed
2. Regional Mode (REG) setting shall be set to 'ON'
3. Factory Reset has been successfully performed
4. Radio application shall be displayed
5. Radio settings screen shall be displayed and by default Regional Mode (REG) settings option shall be set to 'OFF' |
17 | By default / RT shall be ON | Title: Radio text setting default behaviour when previously set to ON
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Radio Text setting is set to 'OFF'
Steps:
1. Select Settings option from FM landing screen
2. Turn ON Radio Text settings option
3. Perform Factory Reset from Settings application
4. Select Radio application from Home screen
5. Select Settings option from FM landing screen and observe Radio Text settings option
Expected Result:
1. Radio settings screen shall be displayed
2. Radio Text setting shall be set to 'ON'
3. Factory Reset has been successfully performed
4. Radio application shall be displayed
5. Radio settings screen shall be displayed and by default Radio Text settings option shall be set to 'ON'
Title: FM Radio text setting default behaviour
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Radio Text setting is set to 'ON'
Steps:
1. Select Settings option from FM landing screen
2. Turn OFF Radio Text settings option
3. Perform Factory Reset from Settings application
4. Select Radio application from Home screen
5. Select Settings option from FM landing screen and observe Radio Text settings option
Expected Result:
1. Radio settings screen shall be displayed
2. Radio Text setting shall be set to 'OFF'
3. Factory Reset has been successfully performed
4. Radio application shall be displayed
5. Radio settings screen shall be displayed and by default Radio Text settings option shall be set to 'ON' |
18 | By default, all presets shall be empty. | Title: Default preset behaviour for AM band
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. Factory reset has been performed from Settings in System
Steps:
1. Select Radio application from System Home screen and launch AM source
2. Observe Preset list
Expected Result:
1. AM landing screen shall be displayed
2. Preset list shall be empty and displayed as '--'
Title: Default preset behaviour for FM band
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. Factory reset has been performed from Settings in System
Steps:
1. Select Radio application from System Home screen and launch FM source
2. Observe Preset list
Expected Result:
1. FM landing screen shall be displayed
2. Preset list shall be empty |
19 | By default, the DAB to FM seamless option is ON. | Title: Default State for DAB to FM seamless setting when previously set to ON
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB landing screen is active
6. DAB to FM handover setting is set to 'OFF'
Steps:
1. Select Settings option from DAB landing screen
2. Turn ON DAB to FM handover settings option
3. Perform Factory Reset from Settings application
4. Select Radio application from Home screen
5. Launch DAB source from Band option
6. Select Settings option from DAB landing screen and observe DAB to FM handover setting
Expected Result:
1. Radio settings screen shall be displayed
2. DAB to FM handover setting shall be set to 'ON'
3. Factory Reset has been successfully performed
4. Radio application shall be displayed
5. DAB landing screen shall be displayed
6. Radio settings screen shall be displayed and by default DAB to FM handover setting option shall be set to 'ON'
Title: Default State for DAB to FM seamless setting when previously set to OFF
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB landing screen is active
6. DAB to FM handover setting is set to 'ON'
Steps:
1. Select Settings option from DAB landing screen
2. Turn OFF DAB to FM handover settings option
3. Perform Factory Reset from Settings application
5. Select Radio application from Home screen
6. Launch DAB source from Band option
7. Select Settings option from DAB landing screen and observe DAB to FM handover setting
Expected Result:
1. Radio settings screen shall be displayed
2. DAB to FM handover setting shall be set to 'OFF'
3. Factory Reset has been successfully performed
4. Radio application shall be displayed
5. DAB landing screen shall be displayed
6. Radio settings screen shall be displayed and by default DAB to FM handover setting option shall be set to 'ON'
|
20 | DAB Tuner functionalities shall be available in FULL_RUN, EXTENDED_MODE and ONE_HOUR states of Power Management, except in USER OFF. | Title: DAB functionalities in Full Run Mode
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB landing screen is active
6. Few DAB stations are added as presets
Steps:
1. Select Browse option from DAB Landing screen
2. Select first station of a multiplex
3. Short press Seek_Previous arrow from DAB landing screen
4. Select any station (not the first/last station) of a multiplex
5. Short press Seek_Previous arrow from DAB landing screen
6. Select last station of a multiplex
7. Short press Seek_Next arrow from DAB landing screen
8. Select any station (not the first/last station) of a multiplex
9. Select any Preset station from DAB landing screen
10. Long press Seek_Previous arrow from DAB landing screen
11. Short press Seek_Previous arrow from DAB landing screen
12. Long press Seek_Next arrow from DAB landing screen
13. Short press Seek_Next arrow from DAB landing screen
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played
3. Last station of the previous multiplex shall be tuned
4. Selected DAB station shall be played
5. Previous station of the current multiplex shall be tuned
6. Selected DAB station shall be played
7. First station of the next multiplex shall be tuned
8. Next station of the current multiplex shall be tuned
9. Station stored as preset shall be played
10. Auto seek down operation shall start. Station name shall be replaced by “Seeking...” and station number and multiplex number shall be changed continuously w.r.t station seeking
11. Auto seek down operation shall be aborted and last tuned station shall be played
12. Auto seek up operation shall start. Station name shall be replaced by “Seeking...” and station number and multiplex number shall be changed continuously w.r.t station seeking
13. Auto seek up operation shall be aborted and last tuned station shall be played
Title: DAB functionalities in One Hour Mode
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in One Hour Mode(KEY_POS to 3 ( ACC ))
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB landing screen is active
6. Few DAB stations are added as presets
Steps:
1. Select Browse option from DAB Landing screen
2. Select first station of a multiplex
3. Short press Seek_Previous arrow from DAB landing screen
4. Select any station (not the first/last station) of a multiplex
5. Short press Seek_Previous arrow from DAB landing screen
6. Select last station of a multiplex
7. Short press Seek_Next arrow from DAB landing screen
8. Select any station (not the first/last station) of a multiplex
9. Select any Preset station from DAB landing screen
10. Long press Seek_Previous arrow from DAB landing screen
11. Short press Seek_Previous arrow from DAB landing screen
12. Long press Seek_Next arrow from DAB landing screen
13. Short press Seek_Next arrow from DAB landing screen
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played
3. Last station of the previous multiplex shall be tuned
4. Selected DAB station shall be played
5. Previous station of the current multiplex shall be tuned
6. Selected DAB station shall be played
7. First station of the next multiplex shall be tuned
8. Next station of the current multiplex shall be tuned
9. Station stored as preset shall be played
10. Auto seek down operation shall start. Station name shall be replaced by “Seeking...” and station number and multiplex number shall be changed continuously w.r.t station seeking
11. Auto seek down operation shall be aborted and last tuned station shall be played
12. Auto seek up operation shall start. Station name shall be replaced by “Seeking...” and station number and multiplex number shall be changed continuously w.r.t station seeking
13. Auto seek up operation shall be aborted and last tuned station shall be played
Title: DAB functionalities in Extended Mode
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Extended Mode (KEY_POS to 0 ( STOP))
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB landing screen is active
6. Few DAB stations are added as presets
Steps:
1. Select Browse option from DAB Landing screen
2. Select first station of a multiplex
3. Short press Seek_Previous arrow from DAB landing screen
4. Select any station (not the first/last station) of a multiplex
5. Short press Seek_Previous arrow from DAB landing screen
6. Select last station of a multiplex
7. Short press Seek_Next arrow from DAB landing screen
8. Select any station (not the first/last station) of a multiplex
9. Select any Preset station from DAB landing screen
10. Long press Seek_Previous arrow from DAB landing screen
11. Short press Seek_Previous arrow from DAB landing screen
12. Long press Seek_Next arrow from DAB landing screen
13. Short press Seek_Next arrow from DAB landing screen
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played
3. Last station of the previous multiplex shall be tuned
4. Selected DAB station shall be played
5. Previous station of the current multiplex shall be tuned
6. Selected DAB station shall be played
7. First station of the next multiplex shall be tuned
8. Next station of the current multiplex shall be tuned
9. Station stored as preset shall be played
10. Auto seek down operation shall start. Station name shall be replaced by “Seeking...” and station number and multiplex number shall be changed continuously w.r.t station seeking
11. Auto seek down operation shall be aborted and last tuned station shall be played
12. Auto seek up operation shall start. Station name shall be replaced by “Seeking...” and station number and multiplex number shall be changed continuously w.r.t station seeking
13. Auto seek up operation shall be aborted and last tuned station shall be played
Title: DAB functionalities in User OFF Mode
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB landing screen is active
Steps:
1. Select Browse option from DAB Landing screen
2. Select any station from the list
3. Enable User OFF mode from System
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played
3. System shall be entered into User OFF mode and DAB Functionalities shall be unavailable in User OFF mode |
21 | During AF switch / the audio shall be muted. | Title: Stored AF list from FM station list
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Use France_Mobility_FM_ActiveAntenna_AF_Dourdan_24072016 (SSD10) streaming file in Lumantek signal generator for listing Alternate Frequencies
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list
3. Select 95.4 MHz from FM station list and wait for few seconds
Expected Result:
1. FM station list shall be displayed
2. Alternate frequencies shall be available for 95.4 MHz frequency.
3. Selected station shall be played and after few seconds, frequencies 95, or 94.9 or 106.5 or 87.8 shall be tuned. Audio shall be muted during AF switch until valid station is tuned |
22 | During Auto seek / Audio shall be muted till the next valid station is locked in. | Title: AM audio muted during Auto seek up and unmuted when valid station is reached
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Press Auto Seek_Next arrow from AM landing screen
2. Wait till a valid station is reached during seeking
Expected Result:
1. Auto seek up operation shall start
2. Tuner audio shall be muted during seek, and unmuted once next available station is reached
Title: AM audio muted during Auto seek down and unmuted when valid station is reached
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Press Auto Seek_Previous arrow from AM landing screen
2. Wait till a valid station is reached during seeking
Expected Result:
1. Auto seek down operation shall start
2. Tuner audio shall be muted during seek, and unmuted once next available station is reached
Title: FM audio muted during Auto seek up and unmuted when valid station is reached
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Press Auto Seek_Next arrow from FM landing screen
2. Wait till a valid station is reached during seeking
Expected Result:
1. Auto seek up operation shall start
2. Tuner audio shall be muted during seek, and unmuted once next available station is reached
Title: FM audio muted during Auto seek down and unmuted when valid station is reached
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Press Auto Seek_Previous arrow from FM landing screen
2. Wait till a valid station is reached during seeking
Expected Result:
1. Auto seek down operation shall start
2. Tuner audio shall be muted during seek, and unmuted once next available station is reached |
23 | During Manual seek / Audio shall be temporary muted till the next frequency is locked in. | Title: AM audio is muted during Manual seek up
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Short press Seek_Next arrow from AM landing screen
2. Continue to press Seek_Next arrow until a valid frequency is reached
Expected Result:
1. Next AM station with a step frequency increased by 1 KHz shall be tuned/seeked
2. Tuner audio shall be muted during seek and, played once valid frequency is reached
Title: AM audio is muted during Manual seek down
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Short press Seek_Previous arrow from AM landing screen
2. Continue to press Seek_Previous arrow until a valid frequency is reached
Expected Result:
1. Previous AM station with a step frequency decreased by 1 KHz shall be tuned/seeked
2. Tuner audio shall be muted during seek and, played once valid frequency is reached
Title: FM audio is muted during Manual seek up
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Short press Seek_Next arrow from FM landing screen
2. Continue to press Seek_Next arrow until a valid frequency is reached
Expected Result:
1. Next FM station with a step frequency increased by 0.05MHz shall be tuned/seeked
2. Tuner audio shall be muted during seek and, played once valid frequency is reached
Title: FM audio is muted during Manual seek down
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Short press Seek_Previous arrow from FM landing screen
2. Continue to press Seek_Previous arrow until a valid frequency is reached
Expected Result:
1. Previous FM station with a step frequency decreased by 0.05MHz shall be tuned/seeked
2. Tuner audio shall be muted during seek and, played once valid frequency is reached |
24 | During a Manual seek down / when the lowest frequency of the band is reached / the tuner shall wrap around to last frequency and the seek shall continue. | Title: Manual seek down for lowest frequency when BROADCAST_AM_BAND = 3
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 3
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list and select the available lowest frequency station
3. Continue to press Seek_Previous arrow until the highest frequency is reached
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. The highest AM frequency displayed shall be 1629kHz and tuned
Title: Manual seek down for lowest frequency when BROADCAST_AM_BAND = 2
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 2
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list and select the available lowest frequency station
3. Continue to press Seek_Previous arrow until the highest frequency is reached
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. The highest AM frequency displayed shall be 1602kHz and tuned
Title: Manual seek down for lowest frequency when BROADCAST_AM_BAND = 4
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 4
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list and select the available lowest frequency station
3. Continue to press Seek_Previous arrow until the highest frequency is reached
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. The highest AM frequency displayed shall be 1701kHz and tuned
Title: Manual seek down for lowest frequency when BROADCAST_AM_BAND = 5
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 5
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list and select the available lowest frequency station
3. Continue to press Seek_Previous arrow until the highest frequency is reached
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. The highest AM frequency displayed shall be 1710kHz and tuned
Title: (MW and LW) Manual seek down for lowest frequency when BROADCAST_AM_BAND = 6
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 6
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list and select the available lowest frequency station
3. Continue to press Seek_Previous arrow until the highest frequency is reached
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. The highest AM frequency displayed shall be 1602kHz for MW and 279KHz for LW and tuned
Title: LW-Manual seek down for lowest frequency when BROADCAST_AM_BAND = 7
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 7
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list and select the available lowest frequency station
3. Continue to press Seek_Previous arrow until the highest frequency is reached
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played.
3. The highest AM frequency displayed shall be 279kHz for LW and tuned.
Title: MW-Manual seek down for lowest frequency when MW BROADCAST_AM_BAND = 7
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 7
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list and select the available lowest frequency station
3. Continue to press Seek_Previous arrow until the highest frequency is reached
Expected Result:
1. AM station list shall be displayed.
2. Selected AM station shall be played.
3. The highest AM frequency displayed shall be 1629kHz for MW and tuned.
Title: Manual seek down for lowest frequency when BROADCAST_AM_BAND = 1
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 1
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list and select the available lowest frequency station
3. Continue to press Seek_Previous arrow until the highest frequency is reached
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. The highest AM frequency displayed shall be 279kHz and tuned
Title: Manual seek down for lowest frequency when BROADCAST_FM_BAND = 001
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 001
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list and select the available lowest frequency station
3. Continue to press Seek_Previous arrow until the highest frequency is reached
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. The highest FM frequency displayed shall be 95.0MHz and tuned
Title: Manual seek down for lowest frequency when BROADCAST_FM_BAND = 100
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 100
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list and select the available lowest frequency station
3. Continue to press Seek_Previous arrow until the highest frequency is reached
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. The highest FM frequency displayed shall be 108.0MHz and tuned
Title: Manual seek down for lowest frequency when BROADCAST_FM_BAND = 010
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 010
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list and select the available lowest frequency station
3. Continue to press Seek_Previous arrow until the highest frequency is reached
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. The highest FM frequency displayed shall be 108.0MHz and tuned
Title: Manual seek down for lowest frequency when BROADCAST_FM_BAND = 011
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 011
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list and select the available lowest frequency station
3. Continue to press Seek_Previous arrow until the highest frequency is reached
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. The highest FM frequency displayed shall be 108.0MHz and tuned
Title: Manual seek down for lowest frequency when BROADCAST_FM_BAND = 101
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 101
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list and select the available lowest frequency station
3. Continue to press Seek_Previous arrow until the highest frequency is reached
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. The highest FM frequency displayed shall be 108.0MHz and tuned
Title: Manual seek down for lowest frequency when BROADCAST_FM_BAND = 110
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 110
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list and select the available lowest frequency station
3. Continue to press Seek_Previous arrow until the highest frequency is reached
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. The highest FM frequency displayed shall be 108.0MHz and tuned
Title: Manual seek down for lowest frequency when BROADCAST_FM_BAND = 111
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 111
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list and select the available lowest frequency station
3. Continue to press Seek_Previous arrow until the highest frequency is reached
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. The highest FM frequency displayed shall be 108.0MHz and tuned |
25 | During a Manual seek up / when the highest frequency of the band is reached / the tuner shall wrap around to first frequency and the seek shall continue. | Title: Manual seek up for highest frequency when BROADCAST_AM_BAND = 3
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 3
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list and select the available highest frequency station
3. Continue to press Seek_Next arrow until the lowest frequency is reached
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. The lowest AM frequency displayed shall be 531kHz and tuned
Title: Manual seek up for highest frequency when BROADCAST_AM_BAND = 2
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 2
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list and select the available highest frequency station
3. Continue to press Seek_Next arrow until the lowest frequency is reached
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. The lowest AM frequency displayed shall be 531kHz and tuned
Title: Manual seek up for highest frequency when BROADCAST_AM_BAND = 4
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 4
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list and select the available highest frequency station
3. Continue to press Seek_Next arrow until the lowest frequency is reached
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. The lowest AM frequency displayed shall be 531kHz and tuned
Title: Manual seek up for highest frequency when BROADCAST_AM_BAND = 5
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 5
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list and select the available highest frequency station
3. Continue to press Seek_Next arrow until the lowest frequency is reached
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. The lowest AM frequency displayed shall be 530kHz and tuned
Title: Manual seek up for highest frequency when BROADCAST_AM_BAND = 1
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 1
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list and select the available highest frequency station
3. Continue to press Seek_Next arrow until the lowest frequency is reached
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. The lowest AM frequency displayed shall be 153kHz and tuned
Title: (MW and LW)Manual seek up for highest frequency when BROADCAST_AM_BAND = 6
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 6
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list and select the available highest frequency station
3. Continue to press Seek_Next arrow until the lowest frequency is reached
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. The lowest AM frequency displayed shall be 153kHz for LW and 531KHZ for MW and tuned.
Title: LW-Manual seek up for highest frequency when BROADCAST_AM_BAND = 7
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 7
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list and select the available highest frequency station
3. Continue to press Seek_Next arrow until the lowest frequency is reached
Expected Result:
1. AM station list shall be displayed.
2. Selected AM station shall be played.
3. The lowest AM frequency displayed shall be 153kHz for LW and tuned. (LW range is 153 KHz to 279 KHz)
Title: MW-Manual seek up for highest frequency when MW BROADCAST_AM_BAND = 7
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 7
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list and select the available highest frequency station
3. Continue to press Seek_Next arrow until the lowest frequency is reached
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. The lowest AM frequency displayed shall be 531 KHz for MW tuned. (MW range is 531KHz to 1629KHz)
Title: Manual seek up for highest frequency when BROADCAST_FM_BAND = 001
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 001
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list and select the available highest frequency station
3. Continue to press Seek_Next arrow until the lowest frequency is reached
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. The lowest FM frequency displayed shall be 76.0MHz and tuned
Title: Manual seek up for highest frequency when BROADCAST_FM_BAND = 100
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 100
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list and select the available highest frequency station
3. Continue to press Seek_Next arrow until the lowest frequency is reached
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. The lowest FM frequency displayed shall be 87.5MHz and tuned
Title: Manual seek up for highest frequency when BROADCAST_FM_BAND = 010
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 010
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list and select the available highest frequency station
3. Continue to press Seek_Next arrow until the lowest frequency is reached
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. The lowest FM frequency displayed shall be 76.0MHz and tuned
Title: Manual seek up for highest frequency when BROADCAST_FM_BAND = 011
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 010
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list and select the available highest frequency station
3. Continue to press Seek_Next arrow until the lowest frequency is reached
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. The lowest FM frequency displayed shall be 76.0MHz and tuned
Title: Manual seek up for highest frequency when BROADCAST_FM_BAND = 101
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 101
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list and select the available highest frequency station
3. Continue to press Seek_Next arrow until the lowest frequency is reached
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. The lowest FM frequency displayed shall be 87.5MHz and tuned
Title: Manual seek up for highest frequency when BROADCAST_FM_BAND = 110
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 110
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list and select the available highest frequency station
3. Continue to press Seek_Next arrow until the lowest frequency is reached
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. The lowest FM frequency displayed shall be 87.9MHz and tuned
Title: Manual seek up for highest frequency when BROADCAST_FM_BAND = 111
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 111
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list and select the available highest frequency station
3. Continue to press Seek_Next arrow until the lowest frequency is reached
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. The lowest FM frequency displayed shall be 87.9MHz and tuned |
26 | During a Traffic Announcement (TA), system shall not allow another TA. | Title: Another TA is not allowed while a TA is playing during FM streaming
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. TA is enabled in radio settings
6. 2 FM modulators (TRX) are connected to System
7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Generate a Traffic announcement via 1st TRX hardware
2. Select "Continue" from the System screen
3. Generate second Traffic announcement via 2nd TRX hardware, while first TA is playing
Expected Result:
1. TA from FM shall be displayed on the System screen
2. Currently streaming FM station shall mute and Traffic announcement shall be played
3. Second TA shall not be allowed while first TA is playing |
27 | During a Traffic Announcement or PTY31, system shall mute the current source. | Title: FM radio mute during Traffic announcement
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming (Station not from connected TRX. Use either Live or other modulator)
Steps:
1. Generate a Traffic announcement via FM modulator
2. Select "Continue" from the System screen
3. Dismiss the Traffic announcement or Wait till Traffic announcement is over
Expected Result:
1. Traffic announcement from FM shall be displayed on the System screen
2. Currently streaming FM station shall mute and Traffic announcement shall be played
3. FM station shall unmute and restore streaming
Title: FM radio mute during PTY31
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Generate a PTY31 via FM modulator
2. Select "Continue" from the System screen
3. Wait till PTY31 is over
Expected Result:
1. PTY31 from FM shall be displayed on the System screen
2. Currently streaming FM station shall mute and PTY31 shall be played
3. FM station shall unmute and restore streaming
Title: AM radio mute during Traffic announcement
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM and FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Select AM source from the Band option
2. Select Browse option and select any station
3. Generate a Traffic announcement via TRX
4. Select "Continue" from the System screen
5. Dismiss the Traffic announcement or Wait till Traffic announcement is over
Expected Result:
1. AM Landing screen shall be launched
2. Selected AM station shall be played
3. TA from FM shall be displayed on the System screen
4. Currently streaming AM station shall mute and Traffic announcement shall be played
5. AM station shall unmute and restore streaming
Title: AM radio mute during PTY31
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM and FM Modulator (TRX) is connected to System
6. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Select AM source from the Band option
2. Select Browse option and select any station
3. Generate a PTY31 via TRX hardware
4. Select "Continue" from the System screen
5. Wait till PTY31 is over
Expected Result:
1. AM Landing screen shall be launched
2. Selected AM station shall be played
3. PTY31 from FM shall be displayed on the System screen
4. Currently streaming AM station shall mute and PTY31 shall be played
2. AM station shall unmute and restore streaming
Title: USB audio mute during Traffic announcement
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. TA is enabled in Radio settings
7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
8. USB device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch USB source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a Traffic announcement via TRX
5. Select "Continue" from the System screen
6. Dismiss the Traffic announcement or Wait till Traffic announcement is over
Expected Result:
1. Media screen shall be displayed
2. USB Media source shall be launched
3. Selected song shall be played
4. TA from FM shall be displayed on the System screen
5. Currently playing USB media shall mute and Traffic announcement shall be played
5. USB media shall unmute and restore playing once TA is completed
Title: USB audio mute during PTY31
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
7. USB device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch USB source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a PTY31 via TRX
5. Select "Continue" from the System screen
6. Wait till PTY31 is over
Expected Result:
1. Media screen shall be displayed
2. USB Media source shall be launched
3. Selected song shall be played
4. PTY31 from FM shall be displayed on the System screen
5. Currently playing USB media shall mute and PTY31 shall be played
6. USB media shall unmute and restore playing once PTY31 is completed
Title: BT audio mute during Traffic announcement
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. TA is enabled in Radio settings
7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
8. BT device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch BT source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a Traffic announcement via TRX
5. Select "Continue" from the System screen
6. Dismiss the Traffic announcement or Wait till Traffic announcement is over
Expected Result:
1. Media screen shall be displayed
2. BT Media source shall be launched
3. Selected song shall be played
4. TA from FM shall be displayed on the System screen
5. Currently playing BT media shall mute and Traffic announcement shall be played
6. BT media shall unmute and restore playing once TA is completed
Title: BT audio mute during PTY31
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
7. BT device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch BT source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a PTY31 via TRX
5. Select "Continue" from the System screen
6. Wait till PTY31 is over
Expected Result:
1. Media screen shall be displayed
2. BT Media source shall be launched
3. Selected song shall be played
4. PTY31 from FM shall be displayed on the System screen
5. Currently playing BT media shall mute and PTY31 shall be played
6. BT media shall unmute and restore playing once TA is completed
Title: iPod audio mute during Traffic announcement
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
8. iPod device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch iPod source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a Traffic announcement via TRX
5. Select "Continue" from the System screen
6. Dismiss the Traffic announcement or Wait till Traffic announcement is over
Expected Result:
1. Media screen shall be displayed
2. iPod Media source shall be launched
3. Selected song shall be played
4. TA from FM shall be displayed on the System screen
5. Currently playing iPod media shall mute and Traffic announcement shall be played
6. iPod media shall unmute and restore playing once TA is completed
Title: iPod audio mute during PTY31
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
7. iPod device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch iPod source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a PTY31 via TRX
5. Select "Continue" from the System screen
6. Wait till PTY31 is over
Expected Result:
1. Media screen shall be displayed
2. iPod Media source shall be launched
3. Selected song shall be played
4. PTY31 from FM shall be displayed on the System screen
5. Currently playing iPod media shall mute and PTY31 shall be played
5. iPod media shall unmute and restore playing once PTY31 is completed
Title: DAB radio mute during Traffic announcement
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB and FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Select DAB source from the Band option
2. Select Browse option and select any station
3. Generate a Traffic announcement via TRX
4. Select "Continue" from the System screen
5. Dismiss the Traffic announcement or Wait till Traffic announcement is over
Expected Result:
1. DAB Landing screen shall be launched
2. Selected DAB station shall be played
3. TA from FM shall be displayed on the System screen
4. Currently streaming DAB station shall mute and Traffic announcement shall be played
5. DAB station shall unmute and restore streaming
Title: DAB radio mute during PTY31
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB and FM Modulator (TRX) is connected to System
6. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Select DAB source from the Band option
2. Select Browse option and select any station
3. Generate a PTY31 via TRX hardware
4. Select "Continue" from the System screen
5. Wait till PTY31 is over
Expected Result:
1. DAB Landing screen shall be launched
2. Selected DAB station shall be played
3. PTY31 from DAB shall be displayed on the System screen
4. Currently streaming DAB station shall mute and PTY31 shall be played
5. DAB station shall unmute and restore streaming |
28 | During a Traffic Announcement, if PTY31 is detected, then system shall interrupt the TA and play PTY31. | Title: PTY31 interrupts TA, during FM streaming
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. TA is enabled in radio settings
6. 2 FM modulators (TRX) are connected to System
7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Generate a Traffic announcement via 1st TRX
2. Select "Continue" from the System screen
3. Generate PTY31 via 2nd TRX hardware, while TA is playing
4. Select "Continue" from the system screen
5. Repeat the step1 - step3 and wait for 5s
Expected Result:
1. TA from FM shall be displayed on the System screen
2. Currently streaming FM station shall mute and Traffic announcement shall be heard
3. PTY31 shall be disaplayed on the screen
4. TA shall be interrupted and PTY31 shall be played
5. TA shall be interrupted and PTY31 shall be played
Title: PTY31 interrupts TA, during USB playback
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. TA is enabled in radio settings
6. 2 FM modulators (TRX) are connected to System
7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
8. USB device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch USB source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a Traffic announcement via 1st TRX
5. Select "Continue" from the System screen
6. Generate PTY31 via 2nd TRX hardware, while TA is playing
7. Select "Continue" from the system screen
8. Repeat the step1 - step6 and wait for 5s
Expected Result:
1. Media screen shall be displayed
2. USB Media source shall be launched
3. Selected song shall be played
4. TA from FM shall be displayed on the System screen
5. Currently playing USB media shall mute and Traffic announcement shall be heard
6. PTY31 shall be disaplayed on the screen
7. TA shall be interrupted and PTY31 shall be played
8. TA shall be interrupted and PTY31 shall be played
Title: PTY31 interrupts TA, during iPod playback
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. TA is enabled in radio settings
6. 2 FM modulators (TRX) are connected to System
7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
8. iPod device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch iPod source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a Traffic announcement via 1st TRX
5. Select "Continue" from the System screen
6. Generate PTY31 via 2nd TRX hardware, while TA is playing
7. Select "Continue" from the system screen
8. Repeat the step1 - step6 and wait for 5s
Expected Result:
1. Media screen shall be displayed
2. iPod Media source shall be launched
3. Selected song shall be played
4. TA from FM shall be displayed on the System screen
5. Currently playing iPod media shall mute and Traffic announcement shall be heard
6. PTY31 shall be disaplayed on the screen
7. TA shall be interrupted and PTY31 shall be played
8. TA shall be interrupted and PTY31 shall be played
Title: PTY31 interrupts TA, during BT playback
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. TA is enabled in radio settings
6. 2 FM modulators (TRX) are connected to System
7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
8. BT device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch BT source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a Traffic announcement via 1st TRX
5. Select "Continue" from the System screen
6. Generate PTY31 via 2nd TRX hardware, while TA is playing
7. Select "Continue" from the system screen
8. Repeat the step1 - step6 and wait for 5s
Expected Result:
1. Media screen shall be displayed
2. BT Media source shall be launched
3. Selected song shall be played
4. TA from FM shall be displayed on the System screen
5. Currently playing BT media shall mute and Traffic announcement shall be heard
6. PTY31 shall be disaplayed on the screen
7. TA shall be interrupted and PTY31 shall be played
8. TA shall be interrupted and PTY31 shall be played
Title: PTY31 interrupts TA, during AM streaming
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. TA is enabled in radio settings
6. AM and 2 FM modulators (TRX) are connected to System
7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Select AM source from the Band option
2. Select Browse option and select any station
3. Generate a Traffic announcement via 1st TRX
4. Select "Continue" from the System screen
5. Generate PTY31 via 2nd TRX hardware, while TA is playing
6. Select "Continue" from the system screen
7. Repeat the step1 - step5 and wait for 5s once PTY31 is displayed on the System
Expected Result:
1. AM Landing screen shall be launched
2. Selected AM station shall be played
3. TA from FM shall be displayed on the System screen
4. Currently streaming AM station shall mute and Traffic announcement shall be heard
5. PTY31 shall be displayed on the screen
6. TA shall be interrupted and PTY31 shall be played
7. TA shall be interrupted and PTY31 shall be played
Title: PTY31 interrupts TA, during DAB streaming
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. TA is enabled in radio settings
6. DAB and 2 FM modulators (TRX) are connected to System
7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Select DAB source from the Band option
2. Select Browse option and select any station
3. Generate a Traffic announcement via 1st TRX
4. Select "Continue" from the System screen
5. Generate PTY31 via 2nd TRX hardware, while TA is playing
6. Select "Continue" from the system screen
7. Repeat the step1 - step5 and wait for 5s once PTY31 is displayed on the System
Expected Result:
1. DAB Landing screen shall be launched
2. Selected DAB station shall be played
3. TA from FM shall be displayed on the System screen
4. Currently streaming DAB station shall mute and Traffic announcement shall be heard
5. PTY31 shall be displayed on the screen
6. TA shall be interrupted and PTY31 shall be played
7. TA shall be interrupted and PTY31 shall be played |
29 | During commutation from other audio sources to announcements in FM (TA or PTY31) or from announcements (TA or PTY31) to other audio sources, System shall not produce annoying sound parasites. | Title: Dismissing Traffic announcement after accepting, during FM streaming
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Generate a Traffic announcement via TRX
2. Select "Continue" from the System screen
3. Dismiss the Traffic announcement
Expected Result:
1. TA from FM shall be displayed on the System screen
2. Currently streaming FM station shall mute and Traffic announcement shall be played. There shall not be any annoying sound parasite during the transition from FM to TA
3. Traffic announcement shall be dismissed. FM station shall unmute and restore streaming. There shall not be any annoying sound parasite during the transition from TA to FM
Title: Dismissing Traffic announcement after accepting, during USB playback
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
8. USB device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch USB source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a Traffic announcement via TRX
5. Select "Continue" from the System screen
6. Dismiss the Traffic announcement
Expected Result:
1. Media screen shall be displayed
2. USB Media source shall be launched
3. Selected song shall be played
4. TA from FM shall be displayed on the System screen
5. Currently playing USB media shall mute and Traffic announcement shall be played. There shall not be any annoying sound parasite during the transition from USB to TA
6. Traffic announcement shall be dismissed. USB media shall unmute and restore playing. There shall not be any annoying sound parasite during the transition from TA to USB source
Title: Dismissing Traffic announcement after accepting, during BT playback
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
8. BT device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch BT source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a Traffic announcement via TRX
5. Select "Continue" from the System screen
6. Dismiss the Traffic announcement
Expected Result:
1. Media screen shall be displayed
2. BT Media source shall be launched
3. Selected song shall be played
4. TA from FM shall be displayed on the System screen
5. Currently playing BT media shall mute and Traffic announcement shall be played. There shall not be any annoying sound parasite during the transition from BT to TA
6. Traffic announcement shall be dismissed. BT media shall unmute and restore playing. There shall not be any annoying sound parasite during the transition from TA to BT
Title: Dismissing Traffic announcement after accepting, during iPod playback
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
8. iPod device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch iPod source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a Traffic announcement via TRX
5. Select "Continue" from the System screen
6. Dismiss the Traffic announcement
Expected Result:
1. Media screen shall be displayed
2. iPod Media source shall be launched
3. Selected song shall be played
4. TA from FM shall be displayed on the System screen
5. Currently playing iPod media shall mute and Traffic announcement shall be played. There shall not be any annoying sound parasite during the transition from iPod to TA
6. Traffic announcement shall be dismissed. iPod media shall unmute and restore playing. There shall not be any annoying sound parasite during the transition from TA to iPod
Title: Dismissing Traffic announcement after accepting, during AM streaming
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM and FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Select AM source from the Band option
2. Select Browse option and select any station
3. Generate a Traffic announcement via TRX
4. Select "Continue" from the System screen
5. Dismiss the Traffic announcement
Expected Result:
1. AM Landing screen shall be launched
2. Selected AM station shall be played
3. TA from FM shall be displayed on the System screen
4. Currently streaming AM station shall mute and Traffic announcement shall be played. There shall not be any annoying sound parasite during the transition from AM to TA
5. AM station shall unmute and restore streaming. There shall not be any annoying sound parasite during the transition from TA to AM
Title: Dismissing Traffic announcement after accepting, during DAB streaming
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB and FM Modulator (TRX) are connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Select DAB source from the Band option
2. Select Browse option and select any station
3. Generate a Traffic announcement via TRX
4. Select "Continue" from the System screen
5. Dismiss the Traffic announcement or Wait till Traffic announcement is over
Expected Result:
1. DAB Landing screen shall be launched
2. Selected DAB station shall be played
3. TA from FM shall be displayed on the System screen
4. Currently streaming DAB station shall mute and Traffic announcement shall be played. There shall not be any annoying sound parasite during the transition from DAB to TA
5. DAB station shall unmute and restore streaming. There shall not be any annoying sound parasite during the transition from TA to DAB
Title: Audio during commutation between PTY31 and FM station
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Generate a PTY31 via TRX
2. Select "Continue" from the System screen
3. Wait for PTY31 to end
Expected Result:
1. PTY31 from FM shall be displayed on the System screen
2. Currently streaming FM station shall mute and PTY31 shall be played. There shall not be any annoying sound parasite during the transition from FM to PTY31
3. PTY31 shall be ended. FM station shall unmute and restore streaming. There shall not be any annoying sound parasite during the transition from PTY31 to FM
Title: Audio during commutation between PTY31 and USB media
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
7. USB device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch USB source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a PTY31 via TRX
5. Select "Continue" from the System screen
6. Wait for PTY31 to finish
Expected Result:
1. Media screen shall be displayed
2. USB Media source shall be launched
3. Selected song shall be played
4. PTY31 from FM shall be displayed on the System screen
5. Currently playing USB media shall mute and PTY31 shall be played. There shall not be any annoying sound parasite during the transition from USB to PTY31
6. PTY31 shall be ended. USB media shall unmute and restore playing. There shall not be any annoying sound parasite during the transition from PTY31 to USB source
Title: Audio during commutation between PTY31 and BT media
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
7. BT device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch BT source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a PTY31 via TRX
5. Select "Continue" from the System screen
6. Wait for PTY31 to finish
Expected Result:
1. Media screen shall be displayed
2. BT Media source shall be launched
3. Selected song shall be played
4. PTY31 from FM shall be displayed on the System screen
5. Currently playing BT media shall mute and PTY31 shall be played.There shall not be any annoying sound parasite during the transition from BT to PTY31
6. PTY31 shall be dismissed. BT media shall unmute and restore playing.There shall not be any annoying sound parasite during the transition from PTY31 to BT
Title: Audio during commutation between PTY31 and iPod media
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
7. iPod device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch iPod source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a PTY31 via TRX
5. Select "Continue" from the System screen
6. Wait for PTY31 to finish
Expected Result:
1. Media screen shall be displayed
2. iPod Media source shall be launched
3. Selected song shall be played
4. PTY31 from FM shall be displayed on the System screen
5. Currently playing iPod media shall mute and PTY31 shall be played. There shall not be any annoying sound parasite during the transition from iPod to PTY31
6. PTY31 shall be dismissed. iPod media shall unmute and restore playing. There shall not be any annoying sound parasite during the transition from PTY31 to iPod
Title: Audio during commutation between PTY31 and AM station
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM and FM Modulator (TRX) is connected to System
6. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Select AM source from the Band option
2. Select Browse option and select any station
3. Generate a PTY31 via TRX
4. Select "Continue" from the System screen
5. Wait for PTY31 to finish
Expected Result:
1. AM Landing screen shall be launched
2. Selected AM station shall be played
3. PTY31 from FM shall be displayed on the System screen
4. Currently streaming AM station shall mute and PTY31 shall be played. There shall not be any annoying sound parasite during the transition from AM to PTY31
5. AM station shall unmute and restore streaming. There shall not be any annoying sound parasite during the transition from PTY31 to AM
Title: Audio during commutation between PTY31 and DAB station
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB and FM Modulator (TRX) are connected to System
6. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Select DAB source from the Band option
2. Select Browse option and select any station
3. Generate a PTY31 via TRX
4. Select "Continue" from the System screen
5. Wait for PTY31 to finish
Expected Result:
1. DAB Landing screen shall be launched
2. Selected DAB station shall be played
3. PTY31 from FM shall be displayed on the System screen
4. Currently streaming DAB station shall mute and PTY31 shall be played. There shall not be any annoying sound parasite during the transition from DAB to PTY31
5. DAB station shall unmute and restore streaming. There shall not be any annoying sound parasite during the transition from PTY31 to DAB |
30 | During ongoing seeking / RDS info shall not be visible until tuner tunes to a valid station. | Title: FM RDS info not displayed during auto seek up
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select a station from the list
3. Press Auto Seek_Next arrow from FM landing screen
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Auto seek up shall start and next FM station with an increased step frequency shall be seeked. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking. RDS (Station name and Radio text) info shall not be displayed until a valid station is seeked
Title: FM RDS info not displayed during auto seek down
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select a station from the list
3. Press Auto Seek_Previous arrow from FM landing screen
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Auto seek down shall start and previous FM station with a decreased step frequency shall be seeked. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking. RDS info shall not be displayed until a valid station is seeked |
31 | During ongoing seeking, RDS info shall not be visible until tuner tunes to a valid station.
| Title: Station information for a valid FM station after manual seek up
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Short press Seek_Next arrow from FM landing screen
2. Continue to press Seek_Next arrow until a valid frequency is reached
Expected Result:
1. Next FM station with a step frequency increased by 0.05MHz shall be tuned/seeked. Station information and Radio Text will not be displayed during tuning
2. Station information and Radio Text shall be displayed without any delay when valid station is tuned
Title: Station information for a valid FM station after manual seek down
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Short press Seek_Previous arrow from FM landing screen
2. Continue to press Seek_Previous arrow until a valid frequency is reached
Expected Result:
1. Previous FM station with a step frequency decreased by 0.05MHz shall be tuned/seeked. Station information and Radio Text will not be displayed during tuning
2. Station information and Radio Text shall be displayed without any delay when valid station is tuned
Title: FM RDS info not displayed during manual seek up
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select a station from the list
3. Short press Seek_Next arrow from FM landing screen
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Next FM station with an increased step frequency shall be seeked and RDS info (Station name and Radio text) shall not be displayed if seeked frequency is not a valid station
Title: FM RDS info not displayed during manual seek down
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select a station from the list
3. Short press Seek_Previous arrow from FM landing screen
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Previous FM station with a decreased step frequency shall be seeked and RDS (Station name and Radio text) info shall not be displayed if seeked frequency is not a valid station |
32 | During seek / if tuner is not able to find the next/previous valid station after traversing the entire band once / it shall stop seek at the last tuned station / where seek was initiated. | Title: Auto seek up operation when no other valid AM stations are found
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
6. Attenuator is plugged to System
Steps:
1. Press Auto Seek_Next arrow from AM landing screen
2. Increase the Attenuator value to decrease signal quality and wait until Auto seek up operation is completed
Expected Result:
1. Auto seek up operation shall start
2. Auto seek up operation is completed and last tuned AM station, where seek was initiated, shall be streamed
Title: Auto seek down operation when no other valid AM stations are found
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
6. Attenuator is plugged to System
Steps:
1. Press Auto Seek_Previous arrow from AM landing screen
2. Increase the Attenuator value to decrease signal quality and wait until Auto seek down operation is completed
Expected Result:
1. Auto seek down operation shall start
2. Auto seek down operation is completed and last tuned AM station, where seek was initiated, shall be streamed
Title: Auto seek up operation when no other valid FM stations are found
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Press Auto Seek_Next arrow from FM landing screen
2. Wait until Auto seek up operation is completed
Expected Result:
1. Auto seek up operation shall start
2. Auto seek up operation is completed and last tuned FM station, where seek was initiated, shall be streamed
Title: Auto seek down operation when no other valid FM stations are found
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Press Auto Seek_Previous arrow from FM landing screen
2. Wait until Auto seek down operation is completed
Expected Result:
1. Auto seek down operation shall start
2. Auto seek down operation is completed and last tuned FM station, where seek was initiated, shall be streamed |
33 | During seek down, the system shall tune to:Â
the previous valid station of the current multiplex if any,Â
else to last valid station of the previous multiplex if any,Â
else wrap around to the last valid station of the last multiplex of the band. | Title: Previous Valid DAB station is played after performing Seek Down
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active.
- DAB is tuned to 5B 174.928 MHz and have strong signal strength.
Steps:
1. Short press on previous seek arrow to perform Seek down.
Expected Result:
1. Previous valid DAB station shall be played. |
34 | During seek up, the system shall tune to:Â
the next valid station of the current multiplex if any,Â
else to first valid station of the next multiplex if any,Â
else wrap around to the first valid station of the first multiplex of the band | Title: Tune next station from current multiplex during seek next
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB landing screen is active
Steps:
1. Select Browse option from DAB Landing screen
2. Select any station (Not the first/last station) of a multiplex
3. Short press Seek_Next arrow from DAB landing screen
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played
3. Next station of the current multiplex shall be tuned. Current station number and total number of stations in current multiplex shall be displayed on the screen.
Title: Tune first station of next available multiplex during seek next
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator 1 is available and connected to the system
5. DAB Modulator 2 is available and connected to the system
6. DAB landing screen is active
Steps:
1. Select Browse option from DAB Landing screen
2. Select last station of first multiplex (Multiplex with lower frequency)
3. Short press Seek_Next arrow from DAB landing screen
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played
3. First station of the next available multiplex (Multiplex with next higher frequency) shall be tuned. Current station number and total number of stations in current multiplex shall be displayed on the screen.
Title: Tune first station of first multiplex during seek next
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator 1 is available and connected to the system
5. DAB Modulator-2 is available and connected to the system
6. DAB landing screen is active
Steps:
1. Select Browse option from DAB Landing screen
2. Select last station of last multiplex (Multiplex having the highest frequency)
3. Short press Seek_Next arrow from DAB landing screen
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played
3. First station of the first multiplex (Multiplex having the lowest frequency) shall be tuned. Current station number and total number of stations in current multiplex shall be displayed on the screen. |
35 | During seek, if the system is not able to find the next/previous valid station after traversing the entire band once, it shall stop seek at the last tuned multiplex and tune to the station where seek was initiated. | Title: Last tuned DAB station is played when no valid stations found during Auto seek up.
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active and valid 5B 176.640 MHz DAB station is playing.
Steps:
1. Unplug antenna from Tuner.
2. Long press on next seek arrow to perform Auto seek up.
3. Wait until Auto seek up operation is completed.
Expected Result:
1. The audio shall be lost.
2. Auto seek up shall be started.
3. Last tuned station(5B 176.640 MHz) shall be played when no valid stations found during Auto seek up operation.
Title: Last tuned DAB station is played when no valid stations found during Auto seek down.
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active and valid 5B 176.640 MHz DAB station is playing.
Steps:
1. Unplug antenna from Tuner.
2. Long press on previous seek arrow to perform Auto seek down.
3. Wait until Auto seek down operation is completed.
Expected Result:
1. The audio shall be lost.
2. Auto seek down shall be started.
3. Last tuned station(5B 176.640 MHz) shall be played when no valid
stations found during Auto seek down operation. |
36 | During seek, the system shall mute the audio until the next valid station is locked in. | Title: For DAB audio is muted until next frequency is locked in after manual seek up
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active and valid DAB station is playing.
Steps:
1. Short press on next seek arrow to perform manual seek up.
2. Wait till next valid station is tuned.
Expected Result:
1. Seeking process should be started
2. New available station should be played
Title: For DAB audio is muted until previous frequency is locked in after manual seek down
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active and valid DAB station is playing.
Steps:
1. Short press on previous seek arrow to perform manual seek down.
2. Wait till next valid station is tuned.
Expected Result:
1. Seeking process should be started
2. New available station should be played |
37 | During seeking / If user presses seek button in opposite direction / then the product shall cancel seeking and accept user operation. | Title: AM - Autoseek cancelled when seek down button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Press Auto Seek_Previous arrow from AM landing screen
2. Press manual Seek_Previous arrow from AM landing screen during auto seek
Expected Result:
1. Auto seek down operation is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek down operation shall be aborted and tuned to last frequency where seek is aborted
Title: FM - Autoseek cancelled when seek down button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Press Auto Seek_Previous arrow from FM landing screen
2. Press manual Seek_Next arrow from FM landing screen during auto seek
Expected Result:
1. Auto seek down operation is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek down operation shall be aborted and tuned to last frequency where seek is aborted |
38 | During seeking / If user presses seek button in the same direction / then the product shall cancel seeking and accept user operation. | Title: For AM band Seek operation is cancelled when seek up button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Press Auto Seek_Next arrow from AM landing screen
2. Press manual Seek_Next arrow from AM landing screen during auto seek
Expected Result:
1. Auto seek up operation is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek up operation shall be aborted and tuned to last frequency where seek is aborted
Title: FM - Autoseek cancelled when seek up button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Press Auto Seek_Next arrow from FM landing screen
2. Press manual Seek_Next arrow from FM landing screen during auto seek
Expected Result:
1. Auto seek up operation is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek up operation shall be aborted and tuned to last frequency where seek is aborted |
39 | During seeking, if user does operation that affect Radio Tuner control (Single tune up/down, seek up/down, Update station list, preset call, band change), then the product shall cancel seeking and accept user operation. | Title: For AM band Seek operation is cancelled when seek up button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Press Auto Seek_Next arrow from AM landing screen
2. Press manual Seek_Next arrow from AM landing screen during auto seek
Expected Result:
1. Auto seek up operation is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek up operation shall be aborted and tuned to last frequency where seek is aborted
Title: AM - Autoseek cancelled when seek down button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Press Auto Seek_Previous arrow from AM landing screen
2. Press manual Seek_Previous arrow from AM landing screen during auto seek
Expected Result:
1. Auto seek down operation is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek down operation shall be aborted and tuned to last frequency where seek is aborted
Title: AM - Autoseek down cancelled when Band selection button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Press Auto Seek_Previous arrow from AM landing screen
2. Press Band option from AM landing screen during auto seek
Expected Result:
1. Auto seek down operation is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek down operation shall be aborted and tuned to last frequency where seek is aborted
Title: AM - Autoseek up cancelled when Browse button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Press Auto Seek_Next arrow from AM landing screen
2. Press Browse option from AM landing screen during auto seek
Expected Result:
1. Auto seek up is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek up operation shall be aborted and tuned to last frequency where seek is aborted
Title: AM - Autoseek down cancelled when Preset button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Press Auto Seek_Previous arrow from AM landing screen
2. Press a Preset from AM landing screen during auto seek
Expected Result:
1. Auto seek down is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek down operation shall be aborted and tuned to last frequency where seek is aborted
Title: AM - Autoseek up cancelled when Band selection button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Press Auto Seek_Next arrow from AM landing screen
2. Press Band option from AM landing screen during auto seek
Expected Result:
1. Auto seek up operation is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek up operation shall be aborted and tuned to last frequency where seek is aborted
Title: AM - Autoseek down cancelled when Browse button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Press Auto Seek_Previous arrow from AM landing screen
2. Press Browse option from AM landing screen during auto seek
Expected Result:
1. Auto seek down is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek down operation shall be aborted and tuned to last frequency where seek is aborted
Title: AM - Autoseek up cancelled when Preset button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Press Auto Seek_Next arrow from AM landing screen
2. Press a Preset from AM landing screen during auto seek
Expected Result:
1. Auto seek up is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek up operation shall be aborted and tuned to last frequency where seek is aborted
Title: FM - Autoseek cancelled when seek up button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Press Auto Seek_Next arrow from FM landing screen
2. Press manual Seek_Next arrow from FM landing screen during auto seek
Expected Result:
1. Auto seek up operation is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek up operation shall be aborted and tuned to last frequency where seek is aborted
Title: FM - Autoseek cancelled when seek down button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Press Auto Seek_Previous arrow from FM landing screen
2. Press manual Seek_Next arrow from FM landing screen during auto seek
Expected Result:
1. Auto seek down operation is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek down operation shall be aborted and tuned to last frequency where seek is aborted
Title: FM - Autoseek down cancelled when Band selection button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Press Auto Seek_Previous arrow from FM landing screen
2. Press Band option from FM landing screen during auto seek
Expected Result:
1. Auto seek down operation is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek down operation shall be aborted and tuned to last frequency where seek is aborted
Title: FM - Autoseek up cancelled when Browse button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Press Auto Seek_Next arrow from FM landing screen
2. Press Browse -->Refresh --> Cancel --> Back button from FM screen.
Expected Result:
1. Auto seek up is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek up operation shall be aborted and tuned to last frequency where seek is aborted
Title: FM - Autoseek down cancelled when Preset button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
6. Few Presets are stored.
Steps:
1. Press Auto Seek_Previous arrow from FM landing screen
2. Press a stored Preset from FM landing screen during auto seek
Expected Result:
1. Auto seek down is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek down operation shall be aborted and selected preset should start playing.
Title: FM - Autoseek up cancelled when Band selection button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Press Auto Seek_Next arrow from FM landing screen
2. Press Band option from FM landing screen during auto seek
Expected Result:
1. Auto seek up operation is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek up operation shall be aborted and tuned to last frequency where seek is aborted
Title: FM - Autoseek down cancelled when Browse button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Press Auto Seek_Previous arrow from FM landing screen
2. Press Browse -->Refresh --> Cancel --> Back button from FM screen.
Expected Result:
1. Auto seek down is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek down operation shall be aborted and tuned to last frequency where seek is aborted
Title: FM - Autoseek up cancelled when Preset button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
6. Few presets are stored.
Steps:
1. Press Auto Seek_Next arrow from FM landing screen
2. Press any stored Preset from FM landing screen during auto seek
Expected Result:
1. Auto seek up is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek up operation shall be aborted and selected preset should start playing |
40 | During startup / the system shall start tuner audio in 30 seconds. | Title: AM Tuner audio during System startup
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and streaming is in progress
Steps:
1. Perform Sleep cycle and observe for AM audio
Expected Result:
1. System should be up and AM station should start playing within 30 seconds
Title: FM Tuner audio during System startup
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and streaming is in progress
Steps:
1. Perform Sleep cycle and observe for FM audio
Expected Result:
1. System should be up and FM station should start playing within 30 seconds |
41 | During the diffusion of an announcement (TA or PTY31), System shall be able to manage the follow-up of the listened program in order to detect any change on it and to restore it at the end of the announcement as it would have done if no announcement had been played. | Title: FM radio mute during Traffic announcement
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming (Station not from connected TRX. Use either Live or other modulator)
Steps:
1. Generate a Traffic announcement via FM modulator
2. Select "Continue" from the System screen
3. Dismiss the Traffic announcement or Wait till Traffic announcement is over
Expected Result:
1. Traffic announcement from FM shall be displayed on the System screen
2. Currently streaming FM station shall mute and Traffic announcement shall be played
3. FM station shall unmute and restore streaming
Title: FM radio mute during PTY31
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Generate a PTY31 via FM modulator
2. Select "Continue" from the System screen
3. Wait till PTY31 is over
Expected Result:
1. PTY31 from FM shall be displayed on the System screen
2. Currently streaming FM station shall mute and PTY31 shall be played
3. FM station shall unmute and restore streaming
Title: AM radio mute during Traffic announcement
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM and FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Select AM source from the Band option
2. Select Browse option and select any station
3. Generate a Traffic announcement via TRX
4. Select "Continue" from the System screen
5. Dismiss the Traffic announcement or Wait till Traffic announcement is over
Expected Result:
1. AM Landing screen shall be launched
2. Selected AM station shall be played
3. TA from FM shall be displayed on the System screen
4. Currently streaming AM station shall mute and Traffic announcement shall be played
5. AM station shall unmute and restore streaming
Title: AM radio mute during PTY31
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM and FM Modulator (TRX) is connected to System
6. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Select AM source from the Band option
2. Select Browse option and select any station
3. Generate a PTY31 via TRX hardware
4. Select "Continue" from the System screen
5. Wait till PTY31 is over
Expected Result:
1. AM Landing screen shall be launched
2. Selected AM station shall be played
3. PTY31 from FM shall be displayed on the System screen
4. Currently streaming AM station shall mute and PTY31 shall be played
2. AM station shall unmute and restore streaming
Title: USB audio mute during Traffic announcement
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. TA is enabled in Radio settings
7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
8. USB device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch USB source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a Traffic announcement via TRX
5. Select "Continue" from the System screen
6. Dismiss the Traffic announcement or Wait till Traffic announcement is over
Expected Result:
1. Media screen shall be displayed
2. USB Media source shall be launched
3. Selected song shall be played
4. TA from FM shall be displayed on the System screen
5. Currently playing USB media shall mute and Traffic announcement shall be played
5. USB media shall unmute and restore playing once TA is completed
Title: USB audio mute during PTY31
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
7. USB device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch USB source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a PTY31 via TRX
5. Select "Continue" from the System screen
6. Wait till PTY31 is over
Expected Result:
1. Media screen shall be displayed
2. USB Media source shall be launched
3. Selected song shall be played
4. PTY31 from FM shall be displayed on the System screen
5. Currently playing USB media shall mute and PTY31 shall be played
6. USB media shall unmute and restore playing once PTY31 is completed
Title: BT audio mute during Traffic announcement
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. TA is enabled in Radio settings
7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
8. BT device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch BT source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a Traffic announcement via TRX
5. Select "Continue" from the System screen
6. Dismiss the Traffic announcement or Wait till Traffic announcement is over
Expected Result:
1. Media screen shall be displayed
2. BT Media source shall be launched
3. Selected song shall be played
4. TA from FM shall be displayed on the System screen
5. Currently playing BT media shall mute and Traffic announcement shall be played
6. BT media shall unmute and restore playing once TA is completed
Title: BT audio mute during PTY31
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
7. BT device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch BT source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a PTY31 via TRX
5. Select "Continue" from the System screen
6. Wait till PTY31 is over
Expected Result:
1. Media screen shall be displayed
2. BT Media source shall be launched
3. Selected song shall be played
4. PTY31 from FM shall be displayed on the System screen
5. Currently playing BT media shall mute and PTY31 shall be played
6. BT media shall unmute and restore playing once TA is completed
Title: iPod audio mute during Traffic announcement
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
8. iPod device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch iPod source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a Traffic announcement via TRX
5. Select "Continue" from the System screen
6. Dismiss the Traffic announcement or Wait till Traffic announcement is over
Expected Result:
1. Media screen shall be displayed
2. iPod Media source shall be launched
3. Selected song shall be played
4. TA from FM shall be displayed on the System screen
5. Currently playing iPod media shall mute and Traffic announcement shall be played
6. iPod media shall unmute and restore playing once TA is completed
Title: iPod audio mute during PTY31
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
7. iPod device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch iPod source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a PTY31 via TRX
5. Select "Continue" from the System screen
6. Wait till PTY31 is over
Expected Result:
1. Media screen shall be displayed
2. iPod Media source shall be launched
3. Selected song shall be played
4. PTY31 from FM shall be displayed on the System screen
5. Currently playing iPod media shall mute and PTY31 shall be played
5. iPod media shall unmute and restore playing once PTY31 is completed
Title: DAB radio mute during Traffic announcement
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB and FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Select DAB source from the Band option
2. Select Browse option and select any station
3. Generate a Traffic announcement via TRX
4. Select "Continue" from the System screen
5. Dismiss the Traffic announcement or Wait till Traffic announcement is over
Expected Result:
1. DAB Landing screen shall be launched
2. Selected DAB station shall be played
3. TA from FM shall be displayed on the System screen
4. Currently streaming DAB station shall mute and Traffic announcement shall be played
5. DAB station shall unmute and restore streaming
Title: DAB radio mute during PTY31
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB and FM Modulator (TRX) is connected to System
6. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Select DAB source from the Band option
2. Select Browse option and select any station
3. Generate a PTY31 via TRX hardware
4. Select "Continue" from the System screen
5. Wait till PTY31 is over
Expected Result:
1. DAB Landing screen shall be launched
2. Selected DAB station shall be played
3. PTY31 from DAB shall be displayed on the System screen
4. Currently streaming DAB station shall mute and PTY31 shall be played
5. DAB station shall unmute and restore streaming |
42 | During the manual station list generation, other tuner functionalities (search, seek, band selection, preset record) will be blocked. | Title: Seek functionality during station list generation for AM Band
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Press Refresh option available in AM station list
3. Tap anywhere in Station list updating popup, other than Cancel button
Expected Result:
1. AM station list shall be displayed
2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram
3. Station list generation is not interrupted and popup is not dismissed. Seek functionality shall not be available during station list generation
Title: Band selection functionality during station list generation for AM Band
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Press Refresh option available in AM station list
3. Tap anywhere in Station list updating popup, other than Cancel button
Expected Result:
1. AM station list shall be displayed
2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram
3. Station list generation is not interrupted and popup is not dismissed. Band selection functionality shall not be available during station list generation
Title: Preset record functionality during station list generation for AM Band
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Press Refresh option available in AM station list
3. Tap anywhere in Station list updating popup, other than Cancel button
Expected Result:
1. AM station list shall be displayed
2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram
3. Station list generation is not interrupted and popup is not dismissed. Preset record functionality shall not be available during station list generation
Title: Seek functionality during station list generation for FM Band
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Press Refresh option available in FM station list
3. Tap anywhere in Station list updating popup, other than Cancel button
Expected Result:
1. FM station list shall be displayed
2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram
3. Station list generation is not interrupted and popup is not dismissed. Seek functionality shall not be available during station list generation
Title: Band selection functionality during station list generation for FM Band
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Press Refresh option available in FM station list
3. Tap anywhere in Station list updating popup, other than Cancel button
Expected Result:
1. FM station list shall be displayed
2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram
3. Station list generation is not interrupted and popup is not dismissed. Band selection functionality shall not be available during station list generation
Title: Preset record functionality during station list generation for FM Band
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Press Refresh option available in FM station list
3. Tap anywhere in Station list updating popup, other than Cancel button
Expected Result:
1. FM station list shall be displayed
2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram
3. Station list generation is not interrupted and popup is not dismissed. Preset record functionality shall not be available during station list generation |
43 | Each station list shall support maximum  (NbMaxStationsInStationList) stations.
Note: Refer table 4 for values
!table4T.PNG|thumbnail!
| Title: AM Station list - Maximum Stations
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
6. More than 100 AM stations are available in AM streaming file
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list
Expected Result:
1. AM station list shall be displayed
2. AM station list shall be listed with maximum 100 stations
Title: Maximum number of stations displayed in FM station list.
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. More than 150 FM stations are available in FM streaming file
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list
Expected Result:
1. FM station list shall be displayed
2. FM station list shall be listed with maximum 150 stations |
44 | Every graphical assets used to draw/animate Radio HMI shall be those provided by STLA for all Brands and Carlines.
See:
\\frpfanas1711.pfa.fr.corp\DOCS\AUTO\PROJECTS\INFO\NIS\PSA_IVI_Smart_Car_2\08 - Software\08-01 - Customer Inputs\08-01-01 - HMI | Title: Verify Element of "RD001_Radio_FM_Landing_Screen"
Preconditions:
1.Vehicle Vbat is On
2.Ign is On
3. FM is active
4. "Home Screen" is active
Steps:
1. Click on Radio Icon from Control bar
Expected Result:
1. "RD001_Radio_FM_Landing_Screen" should be displayed and below element should be matched with FIGMA:
1. Volume bar
2. Control bar
3. Switch media
4. Band Selection
5. Browse
6. Setting
7. FM image
8. Current Station Frequency & Unit
9. Seek up and Seek down
10. Next and Previous
11. Station name
12. Radio Text
13. Station information
Title: Verify Element of "RD004_Radio_Preset_List" screen
Preconditions:
1.Vehicle Vbat is On
2.Ign is On
3. FM is active
4. System is in "RD001_Radio_FM_Landing_Screen"
Steps:
1. Click on next
Expected Result:
1. "RD004_Radio_Preset_List" screen should be displayed and below element should matched with FIGMA:
1. Volume bar
2. Control bar
3. Switch media
4. Band Selection
5. Browse
6. Setting
7. FM icon
8. Station name
9. Current station frequency and unit
11. Seek up and Seek down
12. Radio text
13. Next and previous
14. Station list
Title: Verify Element of "RD005_Radio_Band_Selection_Screen"
Preconditions:
1.Vehicle Vbat is On
2.Ign is On
3. FM is active
4. System is in "RD001_Radio_FM_Landing_Screen"
Steps:
1. Click on Band selection option
Expected Result:
1. "RD005_Radio_Band_Selection_Screen" should be displayed and below element should be matched with FIGMA:
1. Volume bar
2. Control bar
3. Switch media
4. Band Selection
5. Browse
6. Setting
7. Station name
8. Current Station Frequency & Unit
9. Seek up and Seek down
10. Next and Previous
11. Pictogram
12. AM radio, FM radio and DAB radio
13. Station information
Title: Verify Element of "RD002_Radio_AM_Landing_Screen"
Preconditions:
1.Vehicle Vbat is On
2.Ign is On
3. FM is active
4. System is in "RD005_Radio_Band_Selection_Screen"
Steps:
1. Click on AM
Expected Result:
1. "RD002_Radio_AM_Landing_Screen" should be displayed and below element should be matched with FIGMA:
1. Volume bar
2. Control bar
3. Switch media
4. Band Selection
5. Browse
6. Setting
7. Current Station Frequency & Unit
8. AM image
9. Seek up and Seek down
10. Next and Previous
11. Station information
Title: Verify Element of "RD007_Radio_AM_Station_List" screen
Preconditions:
1.Vehicle Vbat is On
2.Ign is On
3. System is in "RD002_Radio_AM_Landing_Screen"
Steps:
1. Click on browse option
Expected Result:
1. "RD007_Radio_AM_Station_List" screen should be displayed and below element should be matched with FIGMA:
1. Volume bar
2. Control bar
3. Refresh
4. Scroll bar
5. Frequency and present number
6. AM station list
7. Back
Title: Verify Element of "RD010_Radio_Station_List_Updating_Popup" screen for AM
Preconditions:
1.Vehicle Vbat is On
2.Ign is On
3. "RD002_Radio_AM_Landing_Screen"
Steps:
1. Click on browse option
2. Click on Refresh option
Expected Result:
1. "RD007_Radio_AM_Station_List" screen should be displayed
2. "RD010_Radio_Station_List_Updating_Popup" screen should be displayed and below element should be matched with FIGMA:
1. Volume bar
2. Control bar
3. Refresh
4. Cancel
5. Radio
6. Station List Updating..
7. Update icon
Title: Verify Element of "RD008_Radio_FM_Station_List" screen
Preconditions:
1.Vehicle Vbat is On
2.Ign is On
3. System is in "RD001_Radio_FM_Landing_Screen"
Steps:
1. Click on browse option
Expected Result:
1. "RD008_Radio_FM_Station_List" screen should be displayed and below element should be matched with FIGMA:
1. Volume bar
2. Control bar
3. Scroll bar
4. Back
5. Refresh
6. Station name and Frequency
7. FM station list
Title: Verify Element of "RD010_Radio_Station_List_Updating_Popup" screen for FM
Preconditions:
1.Vehicle Vbat is On
2.Ign is On
3. System is in "RD008_Radio_FM_Station_List"
Steps:
1. Click on Refresh option
Expected Result:
1. "RD010_Radio_Station_List_Updating_Popup" screen should be displayed and below element should be matched with FIGMA:
1. Volume bar
2. Control bar
3. Cancel
4. Radio
5. Station List Updating..
6. Update icon
Title: Verify Element of "RD011_Radio_Preset_Failure_Popup" screen
Preconditions:
1.Vehicle Vbat is On
2.Ign is On
3. System is in "RD008_Radio_FM_Station_List"
Steps:
1. Long press on any station from station list
Expected Result:
1. "RD011_Radio_Preset_Failure_Popup" screen should be displayed and below element should be matched with FIGMA:
1. Control bar
2. Volume bar
3. "Station cannot be stored as a preset.
Delete a preset station before storing a new one" message
Title: Verify Element of "RD003_Radio_DAB_Landing_Screen"
Preconditions:
1.Vehicle Vbat is On
2.Ign is On
3. FM screen is active
4. System is in "RD005_Radio_Band_Selection_Screen"
Steps:
1. Click on DAB Radio option
Expected Result:
1. "RD003_Radio_DAB_Landing_Screen" should be displayed and below element should be matched with FIGMA:
1. Volume bar
2. Control bar
3. Switch media
4. Band Selection
5. Browse
6. Settings
7. Station logo
8. Station name (16 Char max)
9. Radio Text (on 2 lines 128 char max)
10. Multiplex
11. FM handover
12. Next and Previous buttons
13. Preset list
Title: Verify Element of "RD009_Radio_DAB_Station_List" screen
Preconditions:
1.Vehicle Vbat is On
2.Ign is On
3. System is in "RD003_Radio_DAB_Landing_Screen"
Steps:
1. Click on browse option
Expected Result:
1. "RD009_Radio_DAB_Station_List" screen should be displayed and below element should be matched with FIGMA:
1. Volume bar
2. Control bar
3. Refresh
4. Back
5. Scroll bar
6. Station logo with details
6. DAB station list
Title: Verify Element of "RD010_Radio_Station_List_Updating_Popup" screen for DAB
Preconditions:
1.Vehicle Vbat is On
2.Ign is On
3. System is in "RD009_Radio_DAB_Station_List"
Steps:
1. Click on Refresh option
Expected Result:
1. "RD010_Radio_Station_List_Updating_Popup" screen should be displayed and below element should be matched with FIGMA:
1. Volume bar
2. Control bar
3. Refresh
4. Cancel
5. Radio
6. Station List Updating..
7. Update icon
Title: Verify Element of "RD012_Radio_Service_Announcement_Popup" screen
Preconditions:
1.Vehicle Vbat is On
2.Ign is On
3. System is in "RD003_Radio_DAB_Landing_Screen"
Steps:
1. Start DAB service announcement
Expected Result:
1. "RD012_Radio_Service_Announcement_Popup" screen should be displayed and below element should be matched with FIGMA:
1. Volume bar
2. Control bar
3. Dismiss
4. Continue
5. Radio Service Announcement in Progress…
Title: Verify Element of "RD014_Radio_Service_Announcement_StatusBar" screen
Preconditions:
1.Vehicle Vbat is On
2.Ign is On
3. System is in "RD003_Radio_DAB_Landing_Screen"
Steps:
1. Start DAB service announcement
2. Click on Continue
Expected Result:
1. "RD012_Radio_Service_Announcement_Popup" screen should be displayed
2. "RD014_Radio_Service_Announcement_StatusBar" screen should be displayed and below element should be matched with FIGMA:
1. Volume bar
2. Control bar
3. Service announcement
4. Time
Title: Verify Element of "RD014_Radio_Service_Announcement_StatusBar" screen
Preconditions:
1.Vehicle Vbat is On
2.Ign is On
3. System is in "RD003_Radio_DAB_Landing_Screen"
Steps:
1. Start DAB service announcement
2. Wait for timeout
Expected Result:
1. "RD012_Radio_Service_Announcement_Popup" screen should be displayed
2. "RD014_Radio_Service_Announcement_StatusBar" screen should be displayed and below element should be matched with FIGMA:
1. Volume bar
2. Control bar
3. Service announcement
4. Time
Title: Verify Element of "RD015_Radio_Service_Announcement_Screen"
Preconditions:
1. Vehicle Vbat is ON
2. Ign is ON
3. DekTec is conected with system and DAB radio is active.
4. "Home Screen" is active
Steps:
1. Start DAB service announcement
2. Click on Continue
3. Click on Radio icon from control bar
Expected Result:
3. "RD015_Radio_Service_Announcement_Screen" should be displayed and below element should matched with FIGMA:
1. Volume bar
2. Control bar
3. Dismiss
4. Time
Title: Verify Element of "RD013_Radio_Main_StatusBar" screen
Preconditions:
1.Vehicle Vbat is On
2.Ign is On
3. Radio application is not display
4. System is in "RD001_Radio_FM_Landing_Screen"
Steps:
1. Observe "RD013_Radio_Main_StatusBar" screen
Expected Result:
1. Below element should be matched with FIGMA:
1. Volume bar
2. Control bar
3. Station name on status bar
4. Time
Title: Verify Element of "RD006_Radio_Settings_List" screen
Preconditions:
1.Vehicle Vbat is On
2.Ign is On
3. FM is active
4. DAB is available
5. System is in "RD001_Radio_FM_Landing_Screen"
Steps:
1. Click on Setting
Expected Result:
1."RD006_Radio_Settings_List" screen should displayed and below element should matched with FIGMA:
1. Volume bar
2. Control bar
3. Audio Settings
4. Cross icon
5. Radio settings
6. Balance/Fader
7. Equalizer
8. Volume
9. Sort FM list by station name with Toggle button
10. Radio text(RT) with Toggle button
11. Alternative Frequency (AF) with Toggle button
12. DAB to FM handover with Toggle button
13. Regional Mode (REG) with Toggle button
14. DAB Service Announcements with Toggle button
15. FM Traffic Announcement (TA) with Toggle button
Title: Verify Element of "RD016_Radio_DAB_Station_List_Empty" screen
Preconditions:
1.Vehicle Vbat is On
2.Ign is On
3. System is in "RD003_Radio_DAB_Landing_Screen"
4. DAB station list is empty
Steps:
1. Click on browse option
Expected Result:
1. "RD016_Radio_DAB_Station_List_Empty" screen should be displayed and below element should be matched with FIGMA:
1. Volume bar
2. Control bar
3. Refresh
4. No station found text
5. Back button
Title: Verify Element of "RD017_Radio_AM_Station_List_Empty" screen
Preconditions:
1.Vehicle Vbat is On
2.Ign is On
3. System is in "RD002_Radio_AM_Landing_Screen"
4. AM station list is empty
Steps:
1. Click on browse option
Expected Result:
1. "RD017_Radio_AM_Station_List_Empty" screen should be displayed and below element should be matched with FIGMA:
1. Volume bar
2. Control bar
3. Refresh
4. No station found text
5. Back
Title: Verify Element of "RD018_Radio_FM_Station_List_Empty" screen
Preconditions:
1. Vehicle Vbat is On
2. Ign is On
3. System is in "RD001_Radio_FM_Landing_Screen"
4. FM station list is empty
Steps:
1. Click on browse option
Expected Result:
1. "RD018_Radio_FM_Station_List_Empty" screen should be displayed and below element should be matched with FIGMA:
1. Volume bar
2. Control bar
3. Refresh
4. No station found text
5. Back |
45 | For AM / Tuner shall store the preset station information - frequency. | Title: Preset Information for AM band
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
6. Few AM stations are added as AM presets
Steps:
1. Long press on any preset number from AM landing screen
2. Press Next/Previous buttons associated with Preset list
Expected Result:
1. Currently tuned AM station shall be stored as a preset, to the pressed preset number. Only frequency shall be stored as Preset
2. AM presets shall be displayed and only frequencies shall be stored as Preset. Station name or information are not displayed |
46 | For AM band, Station List shall be capable of providing frequency, Preset Number(if available) for each station.
| Title: AM Station list - Frequency Information
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list
Expected Result:
1. AM station list shall be displayed
2. AM frequencies with kHz unit shall be listed. If station list is empty, "No station found" shall be displayed
Title: AM Station list - Preset number
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
6. Few AM stations are added in Preset list
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list
Expected Result:
1. AM station list shall be displayed
2. Available Preset number associated with AM frequencies shall be displayed. If presets are unavailable, corresponding part will be blank in station list |
47 | For AM, it shall be possible to store  (NbMaxPreset ) presets each for AM
Note: Refer table 4 for values
!image-2022-09-02-21-31-46-759.png! | Title: Maximum presets for AM
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
6. No AM stations are added as Presets
Steps:
1. Press Next button from right side of Preset list
2. Press Previous button from left side of Preset list
3. Long press on any preset number from AM landing screen
4. Stream different AM stations and Repeat the step to store remaining presets
Expected Result:
1. Highest index of preset displayed shall be 18. Next button shall be disabled
2. Lowest index of preset displayed shall be 1. Previous button shall be disabled
3. Currently tuned FM station shall be stored as a preset, to the pressed preset number
4. Maximum presets stored for AM stations shall be 18 |
48 | For DAB, station list shall be capable of providing Multiplex name, station icon (if available), station name , Preset Number(if available) for each station. | Title: Frequency details for listed stations are displayed for DAB station list.
Preconditions:
- System is up and running
- DAB antenna is plugged to tuner
- DAB landing screen is active
Steps:
1.Select 'Station List Browse' icon, from DAB landing screen
Expected Result:
1.Frequency details for listed stations shall be displayed on opening DAB station list.
Title: Station name (if available) details for listed stations are displayed for DAB station list.
Preconditions:
- System is up and running
- DAB antenna is plugged to tuner
- DAB landing screen is active
Steps:
1.Select 'Station List Browse' icon, from DAB landing screen
Expected Result:
1.Station name (if available) details for listed stations shall be displayed on opening DAB station list.
Title: Verify station information for tuned frequency station
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active.
Steps:
1. Tuned to 5A 174.928 MHz freq station.
Expected Result:
1. Service name(DAB/DAB+), multiplex name, station name, and PTY information (if available) shall be displayed for tuned DAB frequency station. |
49 | For DAB, the system shall sort the station list alphabetically by station . | Title: DAB station list is sorted by PS name alphabetically.
Preconditions:
1. System is up and running
2. DAB antenna is plugged to tuner
3. DAB landing screen is active.
4. DAB Station list Sorting is set as per PS name alphabetically .
Steps:
1. Select 'Station List Browse' icon, from DAB landing screen.
Expected Result:
1. DAB station list shall be sorted by PS name alphabetically. |
50 | For FM band, Station List shall be capable of providing frequency, station name (if available), Preset Number(if available), and AF (if available) for each station. | Title: FM Station list - Frequency information
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list
Expected Result:
1. FM station list shall be displayed
2. FM frequencies with MHz unit shall be listed. If station list is empty, "No station found" shall be displayed
Title: FM Station list - Station name
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Few frequencies with and without Station name is available in FM station list
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list
Expected Result:
1. FM station list shall be displayed
2. Available station name shall be displayed for FM frequencies. If station name is unavailable, corresponding part will be blank in station list
Title: FM Station list - Preset number
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Few FM stations are added in Preset list
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list
Expected Result:
1. FM station list shall be displayed
2. Available Preset number associated with FM frequencies shall be displayed. If presets are unavailable, corresponding part will be blank in station list
Title: FM Station list - Alternative Frequency
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Use France_Mobility_FM_ActiveAntenna_AF_Dourdan_24072016 (SSD10) streaming file in Lumantek signal generator for listing Alternate Frequencies
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list
Expected Result:
1. FM station list shall be displayed
2. Alternate frequencies shall be available for 95.4 MHz frequency. If Alternate frequency for a station is unavailable, corresponding part will be blank in station list
Title: FM Station list - Alternate Frequency
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Lumantek Player is plugged to System
5. FM landing screen is active
6. Use France_Mobility_FM_ActiveAntenna_AF_Dourdan_24072016 (SSD10) streaming file in Lumantek signal generator for listing Alternate Frequencies
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list
Expected Result:
1. FM station list shall be displayed
2. Alternate frequencies shall be available for 95.4 MHz frequency. If Alternate frequency for a station is unavailable, corresponding part will be blank in station list |
51 | For FM, Default sorting of station list shall be by PS name.
| Title: FM Station list sort - Default value
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System is currently flashed with latest SW or Factory reset has been performed
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list
3. Press Back button from Station list and select Radio settings option
Expected Result:
1. FM station list shall be displayed
2. FM station list shall be sorted by station name in alphabetical order, by default
3. Radio settings list shall be displayed and 'Sort FM list by station name' option shall be set to ON |
52 | For FM, System shall support EON (Enhanced Other Network) management. | Title: FM EON management
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. FM modulator (TRX) is connected with the system
5. Multiple FM stations are available (Other than the station from FM modulator )
6. FM landing screen is active
Steps:
1. Select the browse option from FM landing screen
2. Select any FM station from the list
3. Generate EON TA from TRX
4. Select the "Continue" from the HMI
5. Select "Dismiss" from HMI
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. EON TA from FM station shall be displayed on the HMI
4. EON TA shall be played
5. TA shall be ended and previously tuned station shall be played
Title: FM EON TA Support
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. FM modulator (TRX) is connected with the system
5. Multiple FM stations are available (Other than the station from FM modulator )
6. FM landing screen is active
Steps:
1. Select the browse option from FM landing screen
2. Select any FM station from the list
3. Generate EON TA from TRX
4. Select "Dismiss" from HMI
5. Again Generate EON TA from TRX
6. Wait for 5s once TA is displayed on the System
7. Wait for the TA to finish
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. EON TA from FM station shall be displayed on the HMI
4. EON TA shall be cancelled and system shall play the FM station without any issue
5. EON TA from FM station shall be displayed on the HMI
6. EON TA shall be played and currently tuned FM station shall be muted
7. TA shall finish and previously tuned FM station shall be played |
53 | For FM, Tuner shall store the preset station information :
- Band(AM/FM)
- Station frequency
- PI code
- AF FM List
- PS Name
| Title: Station frequency & PI Code is displayed for stored preset of FM band
Preconditions:
1.System is up and running (ACC ON->IGN ON)
2.FM antenna is plugged to tuner
3.Launch FM landing screen from Band option and any FM station is playing
Steps:
1.Long press on preset number in FM station list to add currently tuned station into Preset list.
Expected Result:
1.Station frequency and PI Code should be displayed for preset |
54 | For FM, it shall be possible to store ( NbMaxPreset) presets each for FM.
Note: Refer table 4 for values
!image-2022-09-02-21-21-46-879.png! | Title: Maximum presets for FM
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is active
6. No FM stations are added as Presets
Steps:
1. Press Next button from right side of Preset list
2. Press Previous button from left side of Preset list
3. Long press on any preset number from FM landing screen
4. Stream different FM stations and Repeat the step to store remaining presets
Expected Result:
1. Highest index of preset displayed shall be 18. Next button shall be disabled
2. Lowest index of preset displayed shall be 1. Previous button shall be disabled
3. Currently tuned FM station shall be stored as a preset, to the pressed preset number
4. Maximum presets stored for FM stations shall be 18 |
55 | If REG is disable / tuner will perform AF switching from current tuned station to the other stations regardless of that / regional code within Program Information (PI) are different between the current tuned station and the other stations. | Title: AF switching while REG is disabled
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. REG is disabled in Radio settings
7. Use a streaming file which have diferent PI code for different stations, in Lumantek signal generator
Steps:
1. Select Browse option from FM landing screen
2. Select a station that have different PI code for other stations
3. Wait for few seconds
Expected Result:
1. FM station list shall be displayed
2. Selected station shall be played
3. AF switching shall start from current tuned station to other station |
56 | If REG is enabled, Tuner will perform AF switching from current tuned station to the other stations only if PI code that  contain same Regional identification code are match. | Title: AF switching while REG is enabled
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. REG is enabled in Radio settings
7. Use a streaming file which have same PI code for different stations, in Lumantek signal generator
Steps:
1. Select Browse option from FM landing screen
2. Select a station that have same PI code for other stations
3. Wait for few seconds
Expected Result:
1. FM station list shall be displayed
2. Selected station shall be played
3. AF switching shall start from current tuned station to other station |
57 | If present, the system shall highlight the tuned station in the station list. | Title: Station highlight for current station
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. DAB landing screen is active
Steps:
1. Select the Browse option from the DAB landing screen
2. Select any station from the list
3. Select the Browse option
Expected Result:
1. DAB station list shall be displayed
2. Selected station shall be played
3. DAB station list shall be displayed and tuned DAB station shall be highlighted in the list |
58 | If tuned station is not available then the system shall notify the user (eg. displaying a 'No Reception' information). | Title: No Reception information over ignition when last tuned frequency is no more valid
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active.
- 5A 174.928 MHz frequency is tuned.
Steps:
1. Send KEY_POS CAN signal with value '00' to perform Ignition OFF and wait for XX time.
2. Send KEY_POS CAN signal with value '01' to perform Ignition ON.
3. Unplug antenna from Tuner.
Expected Result:
1. System shall be off.
2. System shall be on.
3. No Reception information shall be displayed on DAB screen after antenna is unplugged.
Title: No Reception information over source change when last tuned frequency is no more valid
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active.
Steps:
1. Tune to 5A 174.928 MHz DAB station.
2. Select any other audio sources and play a track.
3. Unplug antenna from Tuner.
4. Now again change Tuner source to DAB using SWC.
Expected Result:
1. 5A 174.928 DAB station shall be playing.
2. Any other audio source shall be selected.
3. Last tuned station shall not played and audio is lost.
4. No Reception information shall be displayed on DAB screen after switching from other sources to DAB. |
59 | If user tune to any frequency that is invalid station / the user shall hear hiss sound. | Title: Hiss Sound for invalid AM station
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
Steps:
1. Select Browse option from AM Landing screen
2. Select any station from the list
3. Short press Seek_Next arrow from AM landing screen
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Next AM station with an increased step frequency shall be tuned/seeked. Hiss sound shall be heard if tuned frequency is an invalid station
Title: Hiss Sound for invalid FM station
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
Steps:
1. Select Browse option from FM Landing screen
2. Select any station from the list
3. Short press Seek_Next arrow from FM landing screen
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Next FM station with an increased step frequency shall be tuned/seeked. Hiss sound shall be heard if tuned frequency is an invalid station |
60 | If, during the diffusion of an announcement (TA or PTY31), the PI code of the current station is changing, then, at the end of the announcement, System shall be able to restore the station that was tuned before the announcement. | Title: System able to restore the station that was tuned before the announcement.
Preconditions:
1. Vehicle battery (Vbat) is ON.
2. Ignition = ON.
3. Home screen appear
4. FM signal simulator is connected with IVI
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Tuned station which has AF frequancy & trigger the TA
2. Untrigger TA
Expected Result:
1.System should tuned to AF frequancy & display the TA
2. TA should end & PI code of the current station is changed also restore station that was tuned before the announcement. |
61 | In case of Handover from DAB to FM, if FM does not support announcement, system shall not play announcement in DAB. | Title: DAB announcement after DAB to FM Handover
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB and FM modulator (TRX) is connected with the system
5. Equivalent FM station is available for DAB station
6. TA and DAB Service Announcements are enabled in radio settings on system
7. Attenuator is connected between DAB modulator and system
8. DAB landing screen is active
9. Stream DAB streaming file having TA in DAB modulator
10. TA settings are disabled in FM modulator (TRX)
Steps:
1. Select the browse option and play DAB station having equivalent FM station
2. Increase the attenuation to reduce the DAB signal strength
3. Wait for the TA from the DAB station
Expected Result:
1. DAB station list shall be displayed and selected DAB station shall be played
2. DAB to FM handover shall be done and equivalent FM station shall be played
3. System shall not display the announcement from the DAB while playing FM station |
62 | In case user selects a empty preset, the tuner shall retain the current select station.
| Title: Preset highlight for current playing AM station
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
6. Few AM stations are added as presets
Steps:
1. Select Browse option from AM landing screen
2. Select a station that is associated to a preset, from the list
Expected Result:
1. AM station list shall be displayed
2. Selected station shall be played and preset associated to the current station shall be highlighted
Title: Preset highlight for current playing FM station
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Few FM stations are added as presets
Steps:
1. Select Browse option from FM landing screen
2. Select a station that is associated to a preset, from the list
Expected Result:
1. FM station list shall be displayed
2. Selected station shall be played and preset associated to the current station shall be highlighted |
63 | In case user selects a empty preset, the tuner shall retain the current select station.
| Title: AM tuner behaviour when selecting empty preset
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
6. Few empty Presets are available
Steps:
1. Select Browse option from AM Landing screen
2. Select any station from the list
3. Select an available empty preset
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Current AM station shall be still played without any interrupts
Title: FM tuner behaviour when selecting empty preset
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Few empty Presets are available
Steps:
1. Select Browse option from FM Landing screen
2. Select any station from the list
3. Select an available empty preset
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Current FM station shall be still played without any interrupts |
64 | It shall be possible to deactivate AM band according to configuration provided by BTEL_BROADCAST_RAD_AM_BA DOTE parameter.
If BTEL_BROADCAST_RAD_AM_BA = disable, system shall deactivate AM band. | Title: AM Band selection when BROADCAST_AM_BAND is set to Disable
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to Disable
Steps:
1. Select Radio icon from System Home screen
2. Select Band option from landing screen
Expected Result:
1. Radio application shall be launched
2. FM band shall be displayed on Band selection dropdown. AM band shall not be displayed on Band selection dropdown |
65 | It shall be possible to deactivate DAB/DAB+ band according to configuration provided by BTEL_BROADCAST_RAD_NUM_BA DOTE parameter:
If BTEL_BROADCAST_RAD_NUM_BA is equal to Disable or SPECIFIC NEW ZEALAND, then system shall deactivate DAB/DAB+ band, else it shall enable it. | Title: DOTE parameter for DAB - Disable DAB from band
Preconditions:
1. Vehicle battery (Vbat) is ON
2. Ignition = ON
3. Canoe is connected to System
4. System is in Full Run mode
5. Security Access for Variant coding is enabled
Steps:
1. Go to Diagnostic Console
2.Go to Engineering Datass
3. Select 2E 21 00 Service
4. Set BTEL _BROADCAST RAD NUM BA_000 to "Disable" and Execute 2E 21 00 SERVICE
5. Perform Sleep Cycle
6. Select radio widget from Homescreen
7. Select band selection icon.
8. Select Radio settings option
Expected Result:
1. Diagnostic console should be opened
2. Engineering Datas section should be opened
3. 2E 21 00 Service With availabe services should be displayed
4. 2E 21 00 Service should be executed and BTEL _BROADCAST RAD NUM BA_000 should be set "Disable"
5. Sleep cycle should be completed and system should Wake Up
6. Radio playing screen should be launched.
7. DAB should not be listed in Band selection options.
8. "DAB to FM handover" and "DAB Service announcement" options should not be displayed in Radio settings.
Title: DOTE parameter for DAB - Set DAB Area selection to "Specific New Zealand"
Preconditions:
1. Vehicle battery (Vbat) is ON
2. Ignition = ON
3. Canoe is connected to System
4. System is in Full Run mode
5. Security Access for Variant coding is enabled
Steps:
1. Go to Diagnostic Console
2.Go to Engineering Datass
3. Select 2E 21 00 Service
4. Set BTEL _BROADCAST RAD NUM BA_000 to "Specific New zealand" and Execute 2E 21 00 SERVICE
5. Perform Sleep Cycle
6. Select radio widget from Homescreen
7. Select band selection icon.
Expected Result:
1. Diagnostic console should be opened
2. Engineering Datas section should be opened
3. 2E 21 00 Service With availabe services should be displayed
4. 2E 21 00 Service should be executed and BTEL _BROADCAST RAD NUM BA_000 should be set "Specific New zealand"
5. Sleep cycle should be completed and system should Wake Up
6. Radio playing screen should be launched.
7. DAB should be listed in Band selection options. |
66 | It shall be possible to store the same frequency at multiple presets. | Title: Same frequency stored at multiple presets for AM band
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Long press on first preset number from AM landing screen
2. Long press on second preset number from AM landing screen
3. Long press on third preset number from AM landing screen
4. Select Browse option and observe the preset number for the current tuned station
Expected Result:
1. Currently tuned AM station shall be stored as a preset, to the pressed first preset number
2. Currently tuned AM station shall be stored as a preset, to the second preset number
3. Currently tuned AM station shall be stored as a preset, to the third preset number
4. The lowest preset number shall be displayed along with current tuned station
Title: Same frequency stored at multiple presets for FM band
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Long press on first preset number from FM landing screen
2. Long press on second preset number from FM landing screen
3. Long press on third preset number from FM landing screen
4. Select Browse option and observe the preset number for the current tuned station
Expected Result:
1. Currently tuned FM station shall be stored as a preset, to the pressed first preset number
2. Currently tuned FM station shall be stored as a preset, to the second preset number
3. Currently tuned FM station shall be stored as a preset, to the third preset number
4. The lowest preset number shall be displayed along with current tuned station |
67 | It shall be possible to store the same station at multiple presets. | Title: Same station can be stored at multiple presets for DAB band
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active and any DAB station is playing.
Steps:
1. Long press on first preset number to add currently tuned station into Preset list.
2. Long press on second preset number to add currently tuned station into Preset list.
3. Long press on third preset number to add currently tuned station into Preset list.
Expected Result:
1. Currently tuned station shall be added into preset list.
2. Currently tuned station shall be added 2 times into preset list.
3. Currently tuned station shall be added three times in Preset list. |
68 | It shall not be possible to deactivate FM band according to configuration provided by BTEL_BROADCAST_RAD_FM_BA DOTE parameter.
If BTEL_BROADCAST_RAD_FM_BA = disable, system shall consider as if BTEL_BROADCAST_RAD_FM_BA = 4 (default value).
See table 2Â
!Table2.PNG!
 | Title: FM Band frequency range support when BROADCAST_FM_BAND is set to Disable
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to disable
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list
Expected Result:
1. FM station list shall be displayed
2. Listed FM frequencies shall be in the range of 87.5-108.0 MHz |
End of preview. Expand
in Dataset Viewer.
No dataset card yet
New: Create and edit this dataset card directly on the website!
Contribute a Dataset Card- Downloads last month
- 0