Datasets:
document_id
stringlengths 10
10
| publication_year
stringclasses 30
values | text
stringlengths 1.04k
256k
| relevant_documents
sequencelengths 1
40
|
---|---|---|---|
31977L0539 | 1977 | Council Directive 77/539/EEC of 28 June 1977 on the approximation of the laws of the Member States relating to reversing lamps for motor vehicles and their trailers
Having regard to the Treaty establishing the European Economic Community, and in particular Article 100 thereof,
Having regard to the proposal from the Commission,
Having regard to the opinion of the European Parliament (1),
Having regard to the opinion of the Economic and Social Committee (2),
Whereas the technical requirements which motor vehicles must satisfy pursuant to national laws relate inter alia to their reversing lamps;
Whereas these requirements differ from one Member State to another ; whereas it is therefore necessary that all Member States adopt the same requirements either in addition to or in place of their existing rules, in order, in particular, to allow the EEC type-approval procedure which was the subject of Council Directive 70/156/EEC of 6 February 1970 on the approximation of the laws of the Member States relating to the type-approval of motor vehicles and their trailers (3), to be introduced in respect of each type of vehicle;
Whereas in Directive 76/756/EEC (4), the Council laid down the common requirements for the installation of lighting and light-signalling devices on motor vehicles and their trailers;
Whereas a harmonized component type-approval procedure for reversing lamps makes it possible for each Member State to check compliance with the common construction and testing requirements and to inform the other Member States of its findings by sending a copy of the component type-approval certificate completed for each type of reversing lamp ; whereas the placing of an EEC component type-approval mark on all reversing lamps manufactured in conformity with the approved type obviates any need for technical checks on these reversing lamps in the other Member States;
Whereas it is desirable to take into account the technical requirements adopted by the UN Economic Commission for Europe in its Regulation No 23 ("Uniform provisions concerning the approval of reversing lights for power-driven vehicles and their trailers") (5) which is annexed to the Agreement of 20 March 1958 concerning the adoption of uniform conditions for approval and reciprocal recognition of approval for motor vehicle equipment and parts;
Whereas the approximation of national laws relating to motor vehicles entails reciprocal recognition by Member States of the tests carried out by each of them on the basis of the common requirements,
Article 1
1. Each Member State shall grant EEC component type-approval for any type of reversing lamp which satisfies the construction and testing requirements laid down in Annexes 0, II, III and IV.
2. The Member State which has granted EEC component type-approval shall take the measures required in order to verify that production models conform to the approved type, in so far as this is necessary and if need be in cooperation with the competent authorities in the other Member States. Such verification shall be limited to spot checks. (1)OJ No C 118, 16.5.1977, p. 29. (2)OJ No C 114, 11.5.1977, p. 3. (3)OJ No L 42, 23.2.1970, p. 1. (4)OJ No L 262, 27.9.1976, p. 1. (5)Economic Commission for Europe document E/ECE/324/E/ECE/TRANS/505/Rev. 1/Add 22, 20.8.1971.
Article 2
Member States shall for each type of reversing lamp which they approve pursuant to Article 1, issue to the manufacturer, or to his authorized representative, an EEC component type-approval mark conforming to the model shown in Annex II.
Member States shall take all appropriate measures to prevent the use of marks liable to create confusion between reversing lamps which have been type-approved pursuant to Article 1, and other devices.
Article 3
1. No Member State may prohibit the placing on the market of reversing lamps on grounds relating to their construction or method of functioning if they bear the EEC component type-approval mark.
2. Nevertheless, a Member State may prohibit the placing on the market of reversing lamps bearing the EEC component type-approval mark which consistently fail to conform to the approved type.
That State shall inform the other Member States and the Commission forthwith of the measures taken, specifying the reasons for its decision.
Article 4
The competent authorities of each Member State shall within one month send to the competent authorities of the other Member States a copy of the component type-approval certificates, an example of which is given in Annex I, completed for each type of reversing lamp which they approve or refuse to approve.
Article 5
1. If the Member State which has granted EEC component type-approval finds that a number of reversing lamps bearing the same EEC component type-approval mark do not conform to the type which it has approved, it shall take the necessary measures to ensure that production models conform to the approved type. The competent authorities of that State shall advise those of the other Member States of the measures taken which may, where there is consistent failure to conform, extend to withdrawal of EEC component type-approval. The said authorities shall take the same measures if they are informed by the competent authorities of another Member State of such failure to conform.
2. The competent authorities of Member States shall inform each other within one month of any withdrawal of EEC component type-approval, and of the reasons for such a measure.
Article 6
Any decision taken pursuant to the provisions adopted in implementation of this Directive, to refuse or with-draw EEC component type-approval for a reversing lamp or prohibit its placing on the market or use shall set out in detail the reasons on which it is based. Such decisions shall be notified to the party concerned, who shall at the same time be informed of the remedies available to him under the laws in force in the Member States and of the time limits allowed for the exercise of such remedies.
Article 7
No Member State may refuse to grant EEC type-approval or national type-approval of any vehicle on grounds relating to its reversing lamps if these bear the EEC component type-approval mark and are fitted in accordance with the requirements laid down in Directive 76/756/EEC.
Article 8
No Member State may refuse or prohibit the sale, registration, entry into service or use of any vehicle on grounds relating to its reversing lamps if these bear the EEC component type-approval mark and are fitted in accordance with the requirements laid down in Directive 76/756/EEC.
Article 9
For the purposes of this Directive, "vehicle" means any motor vehicle intended for use on the road, with or without bodywork, having at least four wheels and a maximum design speed exceeding 25 km/h, and its trailers, with the exception of vehicles which run on rails, agricultural or forestry tractors and machinery and public works vehicles.
Article 10
Any amendments necessary to adjust the requirements of the Annexes to take account of technical progress shall be adopted in accordance with the procedure laid down in Article 13 of Directive 70/156/EEC.
Article 11
1. Member States shall bring into force the provisions needed in order to comply with this Directive within 18 months of its notification and shall forthwith inform the Commission thereof.
2. Member States shall ensure that the texts of the main provisions of national law which they adopt in the field covered by this Directive are communicated to the Commission.
Article 12
This Directive is addressed to the Member States. | [
"UKSI19801182"
] |
31977L0538 | 1977 | Council Directive 77/538/EEC of 28 June 1977 on the approximation of the laws of the Member States relating to rear fog lamps for motor vehicles and their trailers
Having regard to the Treaty establishing the European Economic Community, and in particular Article 100 thereof,
Having regard to the proposal from the Commission,
Having regard to the opinion of the European Parliament (1),
Having regard to the opinion of the Economic and Social Committee (2),
Whereas the technical requirements which motor vehicles must satisfy pursuant to national laws relate inter alia to their rear fog lamps;
Whereas these requirements differ from one Member State to another ; whereas it is therefore necessary that all Member States adopt the same requirements either in addition to or in place of their existing rules, in order, in particular, to allow the EEC type-approval procedure which was the subject of Council Directive 70/156/EEC of 6 February 1970 on the approximation of the laws of the Member States relating to the type-approval of motor vehicles and their trailers (3), to be introduced in respect of each type of vehicle;
Whereas in Directive 76/756/EEC (4), the Council laid down the common requirements for the installation of lighting and light-signalling devices on motor vehicles and their trailers;
Whereas a harmonized component type-approval procedure for rear fog lamps makes it possible for each Member State to check compliance with the common construction and testing requirements and to inform the other Member States of its findings by sending a copy of the component type-approval certificate completed for each type of rear fog lamp ; whereas the placing of an EEC component type-approval mark on all rear fog lamps manufactured in conformity with the approved type obviates any need for technical checks on these rear fog lamps in the other Member States;
Whereas it is desirable to draft the technical requirements so that they have the same aim as the work being carried out on the subject in the UN Economic Commission for Europe;
Whereas the approximation of national laws relating to motor vehicles entails reciprocal recognition by Member States of the tests carried out by each of them on the basis of the common requirements,
Article 1
1. Each Member State shall grant EEC component type-approval for any type of rear fog lamp which satisfies the construction and testing requirements laid down in Annexes 0, II and III.
2. The Member State which has granted EEC component type-approval shall take the measures required in order to verify that production models conform to the approved type, in so far as this is necessary and if need be in cooperation with the competent authorities in the other Member States. Such verification shall be limited to spot checks.
Article 2
Member States shall for each type of rear fog lamp which they approve pursuant to Article 1, issue to the manufacturer, or to his authorized representative, an EEC component type-approval mark conforming to the model shown in Annex II.
Member States shall take all appropriate measures to prevent the use of marks liable to create confusion (1)OJ No C 118, 16.5.1977, p. 29. (2)OJ No C 114, 11.5.1977, p. 2. (3)OJ No L 42, 23.2.1970, p. 1. (4)OJ No L 262, 27.9.1976, p. 1. between rear fog lamps which have been type-approved pursuant to Article 1, and other devices.
Article 3
1. No Member State may prohibit the placing on the market of rear fog lamps on grounds relating to their construction or method of functioning if they bear the EEC component type-approval mark.
2. Nevertheless, a Member State may prohibit the placing on the market of rear fog lamps bearing the EEC component type-approval mark which consistently fail to conform to the approved type.
That State shall inform the other Member States and the Commission forthwith of the measures taken, specifying the reasons for its decision.
Article 4
The competent authorities of each Member State shall within one month send to the competent authorities of the other Member States a copy of the component type-approval certificates, an example of which is given in Annex I, completed for each type of rear fog lamp which they approve or refuse to approve.
Article 5
1. If the Member State which has granted EEC component type-approval finds that a number of rear fog lamps bearing the same EEC component type-approval mark do not conform to the type which it has approved, it shall take the necessary measures to ensure that production models conform to the approved type. The competent authorities of that State shall advise those of the other Member States of the measures taken which may, where there is consistent failure to conform, extend to withdrawal of EEC component type-approval. The said authorities shall take the same measures if they are informed by the competent authorities of another Member State of such failure to conform.
2. The competent authorities of Member States shall inform each other within one month of any withdrawal of EEC component type-approval, and of the reasons for such a measure.
Article 6
Any decision taken pursuant to the provisions adopted in implementation of this Directive, to refuse or withdraw EEC component type-approval for a rear fog lamp or prohibit its placing on the market or use shall set out in detail the reasons on which it is based. Such decision shall be notified to the party concerned, who shall at the same time be informed of the remedies available to him under the laws in force in the Member States and of the time limits allowed for the exercise of such remedies.
Article 7
No Member State may refuse to grant EEC type-approval or national type-approval of any vehicle on grounds relating to its rear fog lamps if these bear the EEC component type-approval mark and are fitted in accordance with the requirements laid down in Directive 76/756/EEC.
Article 8
No Member State may refuse or prohibit the sale, registration, entry into service or use of any vehicle on grounds relating to its rear fog lamps if these bear the EEC component type-approval mark and are fitted in accordance with the requirements laid down in Directive 76/756/EEC.
Article 9
For the purposes of this Directive, "vehicle" means any motor vehicle intended for use on the road, with or without bodywork, having at least four wheels and a maximum design speed exceeding 25 km/h, and its trailers, with the exception of vehicles which run on rails, agricultural or forestry tractors and machinery and public works vehicles.
Article 10
Any amendments necessary to adjust the requirements of the Annexes to take account of technical progress shall be adopted in accordance with the procedure laid down in Article 13 of Directive 70/156/EEC.
Article 11
1. Member States shall bring into force the provisions needed in order to comply with this Directive within 18 months of its notification and shall forthwith inform the Commission thereof.
2. Member States shall ensure that the texts of the main provisions of national law which they adopt in the field covered by this Directive are communicated to the Commission.
Article 12
This Directive is addressed to the Member States. | [
"UKSI19801182"
] |
31977L0540 | 1977 | Council Directive 77/540/EEC of 28 June 1977 on the approximation of the laws of the Member States relating to parking lamps for motor vehicles
Having regard to the Treaty establishing the European Economic Community, and in particular Article 100 thereof,
Having regard to the proposal from the Commission,
Having regard to the opinion of the European Parliament (1),
Having regard to the opinion of the Economic and Social Committee (2),
Whereas the technical requirements which motor vehicles must satisfy pursuant to national laws relate inter alia to their parking lamps;
Whereas these requirements differ from one Member State to another ; whereas it is therefore necessary that all Member States adopt the same requirements either in addition to or in place of their existing rules, in order, in particular, to allow the EEC type-approval procedure which was the subject of Council Directive 70/156/EEC of 6 February 1970 on the approximation of the laws of the Member States relating to the type-approval of motor vehicles and their trailers (3) to be introduced in respect of each type of vehicle;
Whereas in Directive 76/756/EEC (4), the Council laid down the common requirements for the installation of lighting and light-signalling devices on motor vehicles and trailers;
Whereas a harmonized component type-approval procedure for parking lamps makes it possible for each Member State to check compliance with the common construction and testing requirements and to inform the other Member States of its findings by sending a copy of the component type-approval certificate completed for each type of parking lamp ; whereas the placing of an EEC component type-approval mark on all parking lamps manufactured in conformity with the approved type obviates any need for technical checks on these parking lamps in the other Member States;
Whereas the approximation of national laws relating to motor vehicles entails reciprocal recognition by Member States of the tests carried out by each of them on the basis of the common requirements,
Article 1
1. Each Member State shall grant EEC component type-approval for any type of parking lamp which satisfies the construction and testing requirements laid down in Annexes I, II, IV, V and VI.
2. The Member State which has granted EEC component type-approval shall take the measures required in order to verify that production models conform to the approved type, in so far as this is necessary and if need be in cooperation with the competent authorities in the other Member States. Such verification shall be limited to spot checks.
Article 2
Member States shall for each type of parking lamp which they approve pursuant to Article 1 issue to the manufacturer, or to his authorized representative, an EEC component type-approval mark conforming to the model shown in Annex IV.
Member States shall take all appropriate measures to prevent the use of marks liable to create confusion between parking lamps which have been type-approved pursuant to Article 1 and other devices.
Article 3
1. No Member State may prohibit the placing on the market of parking lamps on grounds relating to their construction or method of functioning if they bear the EEC component type-approval mark. (1)OJ No C 118, 16.5.1977, p. 29. (2)OJ No C 114, 11.5.1977, p. 4. (3)OJ No L 42, 23.2.1970, p. 1. (4)OJ No L 262, 27.9.1976, p. 1.
2. Nevertheless, a Member State may prohibit the placing on the market of parking lamps bearing the EEC component type-approval mark which consistently fail to conform to the approved type. That State shall inform the other Member States and the Commission forthwith of the measures taken, specifying the reasons for its decision.
Article 4
The competent authorities of each Member State shall within one month send to the competent authorities of the other Member States a copy of the component type-approval certificates, an example of which is given in Annex III, completed for each type of parking lamp which they approve or refuse to approve.
Article 5
1. If the Member State which has granted EEC component type-approval finds that a number of parking lamps bearing the same EEC component type-approval mark do not conform to the type which it has approved, it shall take the necessary measures to ensure that production models conform to the approved type. The competent authorities of that State shall advise those of the other Member States of the measures taken which may, where there is consistent failure to conform, extend to withdrawal of EEC component type-approval. The said authorities shall take the same measures if they are informed by the competent authorities of another Member State of such failure to conform.
2. The competent authorities of Member States shall inform each other within one month of any withdrawal of EEC component type-approval, and of the reasons for such a measure.
Article 6
Any decision taken pursuant to the provisions adopted in implementation of this Directive, to refuse or withdraw EEC component type-approval for a parking lamp or prohibit its placing on the market or use, shall set out in detail the reasons on which it is based. Such decisions shall be notified to the party concerned, who shall at the same time be informed of the remedies available to him under the laws in force in the Member States and of the time limits allowed for the exercise of such remedies.
Article 7
No Member State may refuse to grant EEC type-approval or national type-approval of a vehicle on grounds relating to its parking lamps if these bear the EEC component type-approval mark and are fitted in accordance with the requirements laid down in Directive 76/756/EEC.
Article 8
No Member State may refuse or prohibit the sale, registration, entry into service or use of any vehicle on grounds relating to its parking lamps if these bear the EEC component type-approval mark and are fitted in accordance with the requirements laid down in Directive 76/756/EEC.
Article 9
For the purposes of this Directive, "vehicle" means any motor vehicle intended for use on the road, with or without bodywork, having at least four wheels and a maximum design speed exceeding 25 km/h, with the exception of vehicles which run on rails, agricultural or forestry tractors and machinery and public works vehicles.
Article 10
Any amendments necessary to adjust the requirements of the Annexes to take account of technical progress shall be adopted in accordance with the procedure laid down in Article 13 of Directive 70/156/EEC.
Article 11
1. Member States shall bring into force the provisions needed in order to comply with this Directive within 18 months of its notification and shall forthwith inform the Commission thereof.
2. Member States shall ensure that the texts of the main provisions of national law which they adopt in the field covered by this Directive are communicated to the Commission.
Article 12
This Directive is addressed to the Member States. | [
"UKSI19801182"
] |
31977L0504 | 1977 | Council Directive 77/504/EEC of 25 July 1977 on pure- bred breeding animals of the bovine species
Having regard to the Treaty establishing the European Economic Community, and in particular Articles 43 and 100 thereof,
Having regard to the proposal from the Commission,
Having regard to the opinion of the European Parliament (1),
Having regard to the opinion of the Economic and Social Committee (2),
Whereas cattle production occupies a very important place in Community agriculture, and satisfactory results depend to a large extent on the use of pure-bred breeding animals;
Whereas most Member States have hitherto endeavoured, as part of their national breeding policies, to promote the production of livestock of a limited number of breeds meeting specific zootechnic standards ; whereas the breeds and standards vary from one Member State to another ; whereas these disparities hinder intra-Community trade;
Whereas, if these disparities are to be removed, thereby increasing agricultural productivity in this sector, intra-Community trade in all pure-bred breeding animals must be progressively liberalized ; whereas complete liberalization of trade requires a later additional harmonization particularly regarding approval for breeding;
Whereas it must be possible for the Member States to insist on pedigree certificates drawn up in accordance with a Community procedure being presented;
Whereas implementing measures in certain technical areas should be taken ; whereas, for the adoption of such measures, a procedure should be provided for establishing close cooperation between Member States and the Commission within the Standing Committee on Zootechnics ; whereas, until the adoption of those implementing measures, the provisions which are at present in force in the areas in question must remain unchanged;
Whereas it must be ensured that importation of pure-bred breeding animals of the bovine species from non-member countries cannot be carried out on conditions which are less severe than those applied within the Community,
Article 1
For the purposes of this Directive the following definitions shall apply: (a) pure-bred breeding animal of the bovine species : any bovine animal the parents and grandparents of which are entered or registered in a herd-book of the same breed, and which is itself either entered or registered and eligible for entry in such a herd-book; (1)OJ No C 76, 3.7.1974, p. 52. (2)OJ No C 116, 30.9.1974, p. 33.
(b) herd-book : any book, register, file or data medium - which is maintained by a breeders' organization or association officially recognized by a Member State in which the breeders' organization or association was constituted, and
- in which pure-bred breeding animals of a given breed of the bovine species are entered or registered with mention of their ancestors.
Article 2
The Member States shall ensure that the following shall not be prohibited, restricted or impeded on zootechnical grounds: - intra-Community trade in pure-bred breeding animals of the bovine species,
- intra-Community trade in the semen and embryos of pure-bred breeding animals of the bovine species,
- the establishment of herd-books, provided that they comply with the requirements laid down pursuant to Article 6,
- the recognition of organizations or associations which maintain herd-books, in accordance with Article 6, and
- subject to Article 3, intra-Community trade in bulls used for artificial insemination.
Article 3
The Council, acting on a proposal from the Commission, shall, before 1 July 1980, adopt Community provisions for the approval of pure-bred breeding animals of the bovine species for breeding.
Until the entry into force of such provisions, approval of pure-bred breeding animals of the bovine species for breeding and approval of bulls to be used for artificial insemination as well as the use of semen and embryos shall remain subject to national law, on the understanding that that law may not be more restrictive than that applicable to pure-bred breeding animals of the bovine species, semen and embryos in the Member State of destination.
Article 4
Breeders' organizations or associations officially recognized by a Member State may not oppose the entry in their herd-books of pure-bred breeding animals of the bovine species from other Member States provided that they satisfy the requirements laid down in accordance with Article 6.
Article 5
Member States may require that pure-bred breeding animals of the bovine species and the semen or embryos from such animals shall be accompanied, in intra-Community trade, by a pedigree certificate which complies with a specimen drawn up in accordance with the procedure laid down in Article 8, particularly with regard to zootechnical performance.
Article 6
1. The following shall be determined in accordance with the procedure laid down in Article 8: - performance monitoring methods and methods for assessing cattle's genetic value,
- the criteria governing the recognition of breeders' organizations and associations,
- the criteria governing the establishment of herd-books,
- the criteria governing entry in herd-books,
- the particulars to be shown on the pedigree certificate.
2. Until the entry into force of the provisions provided for in the first, second and third indents of paragraph 1: (a) the official checks referred to in the first indent of paragraph 1 carried out in each Member State and the herd-books in existence at present shall be recognized by the other Member States;
(b) the recognition of breeders' organizations and associations shall continue to be governed by the rules at present in force in each Member State;
(c) the introduction of new herd-books shall continue to meet the conditions at present in force in each Member State.
Article 7
Until the implementation of Community rules on the subject, the conditions applicable to imports of pure-bred breeding animals of the bovine species from non-member countries must not be more favourable than those governing intra-Community trade.
Member States shall not authorize the import of pure-bred breeding animals of the bovine species from non-member countries unless they are accompanied by a pedigree certificate certifying that they are entered or registered in a herd-book in the exporting non-member country. Proof must be provided that the animals are either entered or registered and eligible for entry in a herd-book in the Community.
Article 8
1. Where the procedure laid down in this Article is to be used, matters shall without delay be referred by the Chairman, either on his own initiative or at the request of a Member State, to the Standing Committee on Zootechnics (hereinafter referred to as "the Committee") set up by the Council Decision 77/505/EEC.
2. Within the Committee the votes of Member States shall be weighted as provided in Article 148 (2) of the Treaty. The Chairman shall not vote.
3. The representative of the Commission shall submit a draft of the measures to be adopted. The Committee shall deliver its opinion on such measures within a time limit set by the Chairman according to the urgency of the matters concerned. Opinions shall be delivered by a majority of 41 votes.
4. The Commission shall adopt the measures and shall apply them immediately where they are in accordance with the opinion of the Committee. Where they are not in accordance with the opinion of the Committee or if no opinion is delivered, the Commission shall without delay propose to the Council the measures to be adopted. The Council shall adopt the measures by a qualified majority.
If, within three months from the date on which the proposal was submitted to it, the Council has not adopted any measures, the Commission shall adopt the proposed measures and apply them immediately save where the Council has decided by a simple majority against those measures.
Article 9
The Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with this Directive by 1 January 1979 at the latest and shall forthwith inform the Commission thereof.
Article 10
This Directive is addressed to the Member States. | [
"UKSI19922370"
] |
31977L0649 | 1977 | Council Directive 77/649/EEC of 27 September 1977 on the approximation of the laws of the Member States relating to the field of vision of motor vehicle drivers
Having regard to the Treaty establishing the European Economic Community, and in particular Article 100 thereof,
Having regard to the proposal from the Commission,
Having regard to the opinion of the European Parliament (1),
Having regard to the opinion of the Economic and Social Committee (2),
Whereas the technical requirements which motor vehicles must satisfy pursuant to national laws relate, inter alia, to the field of vision of the driver;
Whereas these requirements differ from one Member State to another ; whereas it is therefore necessary that all Member States adopt the same requirements, either in addition to or in place of their existing rules, in order, in particular, to allow the EEC type-approval procedure, which was the subject of Council Directive 70/156/EEC of 6 February 1970 on the approximation of the laws of the Member States relating to the type-approval of motor vehicles and their trailers, to be introduced in respect of each type of vehicle (3);
Whereas it is desirable to draft the technical requirements so that they have the same aim as the work being carried out on the subject in the UN Economic Commission for Europe;
Whereas those requirements apply to motor vehicles in category M1 (the international classification of motor vehicles is given in Annex I to Directive 70/156/EEC);
Whereas the approximation of national laws relating to motor vehicles entails reciprocal recognition by Member States of the checks carried out by each of them on the basis of the common requirements,
Article 1
For the purposes of this Directive, "vehicle" means any motor vehicle in category M1 (defined in Annex I to Directive 70/156/EEC) intended for use on the road, having at least four wheels and a maximum design speed exceeding 25 km/h.
Article 2
No Member State may refuse to grant EEC type-approval or national type-approval of a vehicle on grounds relating to the driver's field of vision if it satisfies the requirements set out in Annexes I, III and IV. (1)OJ No C 125, 8.6.1976, p. 49. (2)OJ No C 197, 23.8.1976, p. 10. (3)OJ No L 42, 23.2.1970, p. 1.
Article 3
No Member State may refuse or prohibit the sale, registration, entry into service or use of any vehicle on grounds relating to the driver's field of vision if it satisfies the requirements set out in Annexes I, III and IV.
Article 4
The Member State which has granted type-approval shall take the measures required to ensure that it is informed of any modification of a part or characteristic referred to in section 2.2 of Annex I. The competent authorities of that State shall determine whether it is necessary to carry out further tests on the modified vehicle type and to prepare a new report. If these tests show that the requirements of this Directive have not been complied with, the modification shall not be authorized.
Article 5
Any amendments necessary to adapt the requirements of Annexes I, III, IV and V to technical progress shall be adopted in accordance with the procedure laid down in Article 13 of Directive 70/156/EEC.
However, this procedure shall not apply to amendments introducing provisions relating to a field of vision other than 180º forward field of vision.
Article 6
1. Member States shall bring into force the provisions necessary in order to comply with this Directive within 18 months of its notification and shall forthwith inform the Commission thereof.
2. Member States shall ensure that the texts of the main provisions of national law which they adopt in the field covered by this Directive are communicated to the Commission.
Article 7
This Directive is addressed to the Member States. | [
"UKSI19801182"
] |
31977L0794 | 1977 | Commission Directive 77/794/EEC of 4 November 1977 laying down detailed rules for implementing certain provisions of Directive 76/308/EEC on mutual assistance for the recovery of claims resulting from operations forming part of the system of financing the European Agricultural Guidance and Guarantee Fund, and of agricultural levies and customs duties
Having regard to the Treaty establishing the European Economic Community,
Having regard to Council Directive 76/308/EEC of 15 March 1976 on mutual assistance for the recovery of claims resulting from operations forming part of the system of financing the European Agricultural Guidance and Guarantee Fund, and of agricultural levies and customs duties (1), and in particular Article 22 (1) thereof,
Whereas the abovementioned Directive introduced a system of mutual assistance between the competent authorities of Member States for the purpose of supplying the applicant authority with all the information which it needs, for notifying the addressee concerned of instruments and decisions which are applicable, for the taking of precautionary measures, and for the recovery by the requested authority of claims on behalf of the applicant authority;
Whereas the detailed rules of operation of such mutual assistance must be laid down in each of these fields in order to render it fully effective;
Whereas the measures provided for in this Directive are in accordance with the opinion of the Committee on Recovery,
Article 1
1. This Directive lays the detailed rules for implementing Articles 4 (2) and (4), 5 (2) and (3), 7 (1), (3) and (5), 9 and 12 (1) of Directive 76/308/EEC, hereinafter called "the basic Directive".
2. This Directive also lays down the detailed rules on conversion, transfer of sums recovered and the fixing of a minimum amount for claims which may give rise to a request for assistance.
TITLE I Request for information
Article 2
1. The request for information referred to in Article 4 of the basic Directive shall be made out in (1)OJ No L 73, 19.3.1976, p. 18.
writing in accordance with the model in Annex I. The said request shall bear the official stamp of the applicant authority and shall be signed by an official thereof duly authorized to make such a request.
2. The applicant authority shall, where appropriate, indicate in its request for information the name of any other requested authority to which a similar request for information has been addressed.
Article 3
The request for information may relate to
(a) the debtor ; or
(b) any person liable for settlement of the claim under the law in force in the Member State where the applicant authority is situated.
Where the applicant authority knows that a third party holds assets belonging to one of the persons mentioned in the foregoing paragraph, the request may also relate to that third party.
Article 4
The requested authority shall acknowledge receipt of the request for information in writing (if possible by telex) as soon as possible and in any event within seven days of such receipt.
Article 5
1. The requested authority shall transmit each item of requested information to the applicant authority as and when it is obtained.
2. Where all or part of the requested information cannot be obtained within a reasonable time, having regard to the particular case, the requested authority shall so inform the applicant authority, indicating the reasons therefor.
In any event, at the end of six months from the date of acknowledgement of receipt of the request, the requested authority shall inform the applicant authority of the outcome of the investigations which it has conducted in order to obtain the information requested.
In the light of the information received from the requested authority, the applicant authority may request the latter to continue its investigations. This request shall be made in writing (if possible by telex) within two months from the receipt of the notification of the outcome of the investigations carried out by the requested authority, and shall be treated by the requested authority in accordance with the provisions applying to the initial request.
Article 6
When the requested authority decides not to comply with the request for information addressed to it, it shall notify the applicant authority in writing of the reasons for the refusal to comply with the request, specifying the particular provisions of Article 4 of the basic Directive which it invokes. This notification shall be given by the requested authority as soon as it has taken its decision and in any event within six months from the date of the acknowledgement of the receipt of the request.
Article 7
The applicant authority may at any time withdraw the request for information which it has sent to the requested authority. The decision to withdraw shall be transmitted to the requested authority in writing (if possible by telex).
TITLE II Request for notification
Article 8
The request for notification referred to in Article 5 of the basic Directive shall be made out in writing in duplicate in accordance with the model in Annex II. The said request shall bear the official stamp of the applicant authority and shall be signed by an official thereof duly authorized to make such a request.
Two copies of the instrument (or decision), notification of which is requested, shall be attached to the request referred to in the foregoing paragraph.
Article 9
The request for notification may relate to any natural or legal person who, in accordance with the law in force in the Member State where the applicant authority is situated, shall be informed of any instrument or decision which concerns him.
Article 10
1. Immediately upon receipt of the request for notification, the requested authority shall take the necessary measures to effect that notification in accordance with the law in force in the Member State in which it is situated.
2. The requested authority shall inform the applicant authority of the date of notification as soon as this has been done, by returning to it one of the copies of its request with the certificate on the reverse side duly completed.
TITLE III Request for recovery and/or for the taking of precautionary measures
Article 11
1. The request for recovery and/or for the taking of precautionary measures referred to in Articles 6 and 13 of the basic Directive shall be made out in writing in accordance with the model Annex III. The request, which shall include a declaration that the conditions laid down in the basic Directive for initiating the mutual assistance procedure in the particular case have been fulfilled, shall bear the official stamp of the applicant authority and shall be signed by an official thereof duly authorized to make such a request.
2. The instrument permitting enforcement which shall accompany the request for recovery and/or for the taking of precautionary measures may be issued in respect of several claims where it concerns one and the same person.
For the purposes of Articles 12 to 19, all claims which are covered by the same instrument permitting enforcement shall be deemed to constitute a single claim.
Article 12
1. The request for recovery and/or for the taking of precautionary measures may relate to (a) the debtor ; or
(b) any person liable for settlement of the claim under the law in force in the Member State in which it is situated.
2. Where appropriate, the applicant authority shall inform the requested authority of any assets of the persons referred to in paragraph 1 which to its knowledge are held by a third party.
Article 13
1. The applicant authority shall state the amounts of the claim to be recovered both in the currency of the Member State in which it is situated and also in the currency of the Member State in which the requested authority is situated.
2. The rate of exchange to be used for the purposes of paragraph 1 shall be the latest selling rate recorded on the most representative exchange market or markets of the Member State in which the applicant authority is situated on the date when the request for recovery is signed.
Article 14
The requested authority shall acknowledge receipt of the request for recovery and/or for the taking of precautionary measures in writing (if possible by telex) as soon as possible and in any event within seven days of its receipt.
Article 15
Where, within a reasonable time having regard to the particular case, all or part of the claim cannot be recovered or precautionary measures cannot be taken, the requested authority shall so inform the applicant authority, indicating the reasons therefor.
In any event, at the end of one year from the date of acknowledgement of the receipt of the request, the requested authority shall inform the applicant authority of the outcome of the procedure which it has undertaken for recovery and/or for the taking of precautionary measures.
In the light of the information received from the requested authority, the applicant authority may request the latter to continue the procedure which it has undertaken for recovery and/or for the taking of precautionary measures. This request shall be made in writing (if possible by telex) within two months from the receipt of the notification of the outcome of the procedure undertaken by the requested authority for recovery and/or for the taking of precautionary measures, and shall be treated by the requested authority in accordance with the provisions applying to the initial request.
Article 16
Any action contesting the claim or the instrument permitting its enforcement which is taken in the Member State in which the applicant authority is situated shall be notified to the requested authority in writing (if possible by telex) by the applicant authority immediately after it has been informed of such action.
Article 17
1. If the request for recovery and/or for the taking of precautionary measures becomes nugatory as a result of payment of the claim or of its cancellation or for any other reason, the applicant authority shall immediately inform the requested authority in writing (if possible by telex) so that the latter may stop any action which it has undertaken.
2. Where the amount of the claim which is the subject of the request for recovery and/or for the taking of precautionary measures is amended for any reason, the applicant authority shall immediately inform the requested authority in writing (if possible by telex).
If the amendment consists of a reduction in the amount of the claim, the requested authority shall continue the action which it has undertaken with a view to recovery and/or to the taking of precautionary measures, but that action shall be limited to the amount still outstanding if, at the time the requested authority is informed of the reduction of the amount of the claim, the original amount has already been recovered by it but the transfer procedure referred to in Article 18 has not yet been initiated, the requested authority shall repay the amount overpaid to the person entitled thereto.
If the amendment consists of an increase in the amount of the claim, the applicant authority shall as soon as possible address to the requested authority an additional request for recovery and/or for the taking of precautionary measures. This additional request shall, as far as possible be dealt with by the requested authority at the same time as the original request of the applicant authority. Where, in view of the state of progress of the existing procedure, the joinder of the additional request and the original request is not possible, the requested authority shall only be required to comply with the additional request if it concerns an amount not less than that referred to in Article 20.
3. To convert the amended amount of the claim into the currency of the Member State in which the requested authority is situated, the applicant authority shall use the exchange rate used in its original request.
Article 18
Any sum recovered by the requested authority, including, where applicable, the interest referred to in Article 9 (2) of the basic Directive, shall be the subject of a transfer to the applicant authority in the currency of the Member State in which the requested authority is situated. This transfer shall take place within one month of the date on which the recovery was effected.
Article 19
Irrespective of any amounts collected by the requested authority by way of interest referred to in Article 9 (2) of the basic Directive, the claim shall be deemed to have been recovered in proportion to the recovery of the amount expressed in the national currency of the Member State in which the requested authority is situated, on the basis of the exchange rate referred to in Article 13 (2).
TITLE IV General and final provisions
Article 20
1. A request for assistance may be made by the applicant authority in respect of either a single claim or several claims where these are recoverable from one and the same person.
2. No request for assistance may be made if the amount of the relevant claim or claims is less than 750 European units of account.
Article 21
Information and other particulars communicated by the requested authority to the applicant authority shall be made out in the official language or one of the official languages of the Member State in which the requested authority is situated.
Article 22
The Member States shall bring into force not later than 1 January 1978 the measures necessary to comply with this Directive.
Article 23
Each Member State shall inform the Commission of the measures which it takes for implementing this Directive. The Commission shall communicate such information to the other Member States.
Article 24
This Directive is addressed to the Member States. | [
"UKPGA19770036",
"UKPGA19800048"
] |
31977L0799 | 1977 | Council Directive 77/799/EEC of 19 December 1977 concerning mutual assistance by the competent authorities of the Member States in the field of direct taxation
Having regard to the Treaty establishing the European Economic Community, and in particular Article 100 thereof,
Having regard to the proposal from the Commission,
Having regard to the opinion of the European Parliament (1),
Having regard to the opinion of the Economic and Social Committee (2),
Whereas practices of tax evasion and tax avoidance extending across the frontiers of Member States lead to budget losses and violations of the principle of fair taxation and are liable to bring about distortions of capital movements and of conditions of competition ; whereas they therefore affect the operation of the common market;
Whereas, for these reasons the Council adopted on 10 February 1975 a resolution on the measures to be taken by the Community in order to combat international tax evasion and avoidance (3);
Whereas the international nature of the problem means that national measures, whose effect does not extend beyond national frontiers, are insufficient ; whereas collaboration between administrations on the basis of bilateral agreements is also unable to counter new forms of tax evasion and avoidance, which are increasingly assuming a multinational character;
Whereas collaboration between tax administrations within the Community should therefore be strengthened in accordance with common principles and rules;
Whereas the Member States should, on request, exchange information concerning particular cases ; whereas the State so requested should make the necessary enquiries to obtain such information;
Whereas the Member States should exchange, even without any request, any information which appears relevant for the correct assessment of taxes on income and on capital, in particular where there appears to be an artificial transfer of profits between enterprises in different Member States or where such transactions are carried out between enterprises in two Member States through a third country in order to obtain tax advantages, or where tax has been or may be evaded or avoided for any reason whatever;
Whereas it is important that officials of the tax administration of one Member State be allowed to be present in the territory of another Member State if both the States concerned consider it desirable; (1)OJ No C 293, 13.12.1976, p. 34. (2)OJ No C 56, 7.3.1977, p. 66. (3)OJ No C 35, 14.2.1975, p. 1.
Whereas care must be taken to ensure that information provided in the course of such collaboration is not disclosed to unauthorized persons, so that the basic rights of citizens and enterprises are safeguarded ; whereas it is therefore necessary that the Member States receiving such information should not use it, without the authorization of the Member State supplying it, other than for the purposes of taxation or to facilitate legal proceedings for failure to observe the tax laws of the receiving State ; whereas it is also necessary that the receiving States afford the information the same degree of confidentiality which it enjoyed in the State which provided it, if the latter so requires;
Whereas a Member State which is called upon to carry out enquiries or to provide information shall have the right to refuse to do so where its laws or administrative practices prevent its tax administration from carrying out these enquiries or from collecting or using this information for its own purposes, or where the provision of such information would be contrary to public policy or would lead to the disclosure of a commercial, industrial or professional secret or of a commercial process, or where the Member State for which the information is intended is unable for practical or legal reasons to provide similar information;
Whereas collaboration between the Member States and the Commission is necessary for the permanent study of cooperation procedures and the pooling of experience in the fields considered, and in particular in the field of the artificial transfer of profits within groups of enterprises, with the aim of improving those procedures and of preparing appropriate Community rules,
Article 1
General provisions
1. In accordance with the provisions of this Directive the competent authorities of the Member States shall exchange any information that may enable them to effect a correct assessment of taxes on income and on capital.
2. There shall be regarded as taxes on income and on capital, irrespective of the manner in which they are levied, all taxes imposed on total income, on total capital, or on elements of income or of capital, including taxes on gains from the disposal of movable or immovable property, taxes on the amounts of wages or salaries paid by enterprises, as well as taxes on capital appreciation.
3. The taxes referred to in paragraph 2 are at present, in particular:
in Belgium:
Impôt des personnes physiques/Personenbelasting
Impôt des sociétés/Vennootschapsbelasting
Impôt des personnes morales/Rechtspersonenbelasting
Impôt des non-résidents/Belasting der niet-verblijfhouders
in Denmark:
Indkomstskaten til staten
Selsskabsskat
Den kommunale indkomstskat
Den amtskommunale indkomstskat
Folkepensionsbidragene
Sømandsskatten
Den særlige indkomstskat
Kirkeskatten
Formueskatten til staten
Bidrag til dagpengefonden
in Germany:
Einkommensteuer
Körperschaftsteuer
Vermögensteuer
Gewerbesteuer
Grundsteuer
in France:
Impôt sur le revenu
Impôt sur les sociétés
Taxe professionnelle
Taxe foncière sur les propriétés bâties
Taxe foncière sur les propriétés non bâties
in Ireland:
Income tax
Corporation tax
Capital gains tax
Wealth tax in Italy:
Imposta sul reddito delle persone fisiche
Imposta sul reddito delle persone giuridiche
Imposta locale sui redditi
in Luxembourg:
Impôt sur le revenu des personnes physiques
Impôt sur le revenu des collectivités
Impôt commercial communal
Impôt sur la fortune
Impôt foncier
in the Netherlands:
Inkomstenbelasting
Vennootschapsbelasting
Vermogensbelasting
in the United Kingdom:
Income tax
Corporation tax
Capital gains tax
Petroleum revenue tax
Development land tax
4. Paragraph 1 shall also apply to any identical or similar taxes imposed subsequently, whether in addition to or in place of the taxes listed in paragraph 3. The competent authorities of the Member States shall inform one another and the Commission of the date of entry into force of such taxes.
5. The expression "competent authority" means:
in Belgium:
De minister van financiën or an authorized representative
Le ministre des finances or an authorized representative
in Denmark:
Ministeren for skatter og afgifter or an authorized representative
in Germany:
Der Bundesminister der Finanzen or an authorized representative
in France:
Le ministre de l'économie or an authorized representative
in Ireland:
The Revenue Commissioners or their authorized representative
in Italy:
Il Ministro per le finanze or an authorized representative
in Luxembourg:
Le ministre des finances or an authorized representative
in the Netherlands:
De minister van financiën or an authorized representative
in the United Kingdom:
The Commissioners of Inland Revenue or their authorized representative
Article 2
Exchange on request
1. The competent authority of a Member State may request the competent authority of another Member State to forward the information referred to in Article 1 (1) in a particular case. The competent authority of the requested State need not comply with the request if it appears that the competent authority of the State making the request has not exhausted its own usual sources of information, which it could have utilized, according to the circumstances, to obtain the information requested without running the risk of endangering the attainment of the sought after result.
2. For the purpose of forwarding the information referred to in paragraph 1, the competent authority of the requested Member State shall arrange for the conduct of any enquiries necessary to obtain such information.
Article 3
Automatic exchange of information
For categories of cases which they shall determine under the consultation procedure laid down in Article 9, the competent authorities of the Member States shall regularly exchange the information referred to in Article 1 (1) without prior request.
Article 4
Spontaneous exchange of information
1. The competent authority of a Member State shall without prior request forward the information referred to in Article 1 (1), of which it has knowledge, to the competent authority of any other Member State concerned, in the following circumstances: (a) the competent authority of the one Member State has grounds for supposing that there may be a loss of tax in the other Member State;
(b) a person liable to tax obtains a reduction in or an exemption from tax in the one Member State which would give rise to an increase in tax or to liability to tax in the other Member State;
(c) business dealings between a person liable to tax in a Member State and a person liable to tax in another Member State are conducted through one or more countries in such a way that a saving in tax may result in one or the other Member State or in both;
(d) the competent authority of a Member State has grounds for supposing that a saving of tax may result from artificial transfers of profits within groups of enterprises;
(e) information forwarded to the one Member State by the competent authority of the other Member State has enabled information to be obtained which may be relevant in assessing liability to tax in the latter Member State.
2. The competent authorities of the Member States may, under the consultation procedure laid down in Article 9, extend the exchange of information provided for in paragraph 1 to cases other than those specified therein.
3. The competent authorities of the Member States may forward to each other in any other case, without prior request, the information referred to in Article 1 (1) of which they have knowledge.
Article 5
Time limit for forwarding information
The competent authority of a Member State which, under the preceding Articles, is called upon to furnish information, shall forward it as swiftly as possible. If it encounters obstacles in furnishing the information or if it refuses to furnish the information, it shall forthwith inform the requesting authority to this effect, indicating the nature of the obstacles or the reasons for its refusal.
Article 6
Collaboration by officials of the State concerned
For the purpose of applying the preceding provisions, the competent authority of the Member State providing the information and the competent authority of the Member State for which the information is intended may agree, under the consultation procedure laid down in Article 9, to authorize the presence in the first Member State of officials of the tax administration of the other Member State. The details for applying this provision shall be determined under the same procedure.
Article 7
Provisions relating to secrecy
1. All information made known to a Member State under this Directive shall be kept secret in that State in the same manner as information received under its domestic legislation.
In any case, such information: - may be made available only to the persons directly involved in the assessment of the tax or in the administrative control of this assessment,
- may in addition be made known only in connection with judicial proceedings or administrative proceedings involving sanctions undertaken with a view to, or relating to, the making or reviewing the tax assessment and only to persons who are directly involved in such proceedings ; such information may, however, be disclosed during public hearings or in judgements if the competent authority of the Member State supplying the information raises no objection,
- shall in no circumstances be used other than for taxation purposes or in connection with judicial proceedings or administrative proceedings involving sanctions undertaken with a view to, or in relation to, the making or reviewing the tax assessment.
2. Paragraph 1 shall not oblige a Member State whose legislation or administrative practice lays down, for domestic purposes, narrower limits than those contained in the provisions of that paragraph, to provide information if the State concerned does not undertake to respect those narrower limits.
3. Notwithstanding paragraph 1, the competent authorities of the Member State providing the information may permit it to be used for other purposes in the requesting State, if, under the legislation of the informing State, the information could, in similar circumstances, be used in the informing State for similar purposes.
4. Where a competent authority of a Member State considers that information which it has received from the competent authority of another Member State is likely to be useful to the competent authority of a third Member State, it may transmit it to the latter competent authority with the agreement of the competent authority which supplied the information.
Article 8
Limits to exchange of information
1. This Directive shall impose no obligation to have enquiries carried out or to provide information if the Member State, which should furnish the information, would be prevented by its laws or administrative practices from carrying out these enquiries or from collecting or using this information for its own purposes.
2. The provision of information may be refused where it would lead to the disclosure of a commercial, industrial or professional secret or of a commercial process, or of information whose disclosure would be contrary to public policy.
3. The competent authority of a Member State may refuse to provide information where the State concerned is unable, for practical or legal reasons, to provide similar information.
Article 9
Consultations
1. For the purposes of the implementation of this Directive, consultations shall be held, if necessary in a Committee, between: - the competent authorities of the Member States concerned at the request of either, in respect of bilateral questions,
- the competent authorities of all the Member States and the Commission, at the request of one of those authorities or the Commission, in so far as the matters involved are not solely of bilateral interest.
2. The competent authorities of the Member States may communicate directly with each other. The competent authorities of the Member States may by mutual agreement permit authorities designated by them to communicate directly with each other in specified cases or in certain categories of cases.
3. Where the competent authorities make arrangements on bilateral matters covered by this Directive other than as regards individual cases, they shall as soon as possible inform the Commission thereof. The Commission shall in turn notify the competent authorities of the other Member States.
Article 10
Pooling of experience
The Member States shall, together with the Commission, constantly monitor the cooperation procedure provided for in this Directive and shall pool their experience, especially in the field of transfer pricing within groups of enterprises, with a view to improving such cooperation and, where appropriate, drawing up a body of rules in the fields concerned.
Article 11
Applicability of wider-ranging provisions of assistance
The foregoing provisions shall not impede the fulfilment of any wider obligations to exchange information which might flow from other legal acts.
Article 12
Final provisions
1. Member States shall bring into force the necessary laws, regulations and administrative provisions in order to comply with this Directive not later than 1 January 1979 and shall forthwith communicate them to the Commission.
2. Member States shall communicate to the Commission the texts of any important provisions of national law which they subsequently adopt in the field covered by this Directive.
Article 13
This Directive is addressed to the Member States. | [
"UKPGA19780042"
] |
31977L0805 | 1977 | Council Directive 77/805/EEC of 19 December 1977 amending Directive 72/464/EEC on taxes, other than turnover taxes, which affect the consumption of manufactured tobacco
Having regard to the Treaty establishing the European Economic Community, and in particular Articles 99 and 100 thereof,
Having regard to the proposal from the Commission,
Having regard to the opinion of the European Parliament (1),
Having regard to the opinion of the Economic and Social Committee (2),
Whereas, in accordance with Council Directive 72/464/EEC of 19 December 1972 on taxes, other than turnover taxes, which affect the consumption of manufactured tobacco (3), as amended by Directives 74/318/EEC (4), 75/786/EEC (5) and 76/911/EEC (6) the Council shall adopt, at least six months before the expiry of the first stage, a Directive laying down the special criteria to apply during the second stage;
Whereas the first stage expires on 31 December 1977 ; whereas a further extension of this stage has proved necessary;
Whereas the special criteria applicable during the first stage have made possible an initial approximation of the structures of the excise duties on cigarettes in seven of the nine Member States, without the tax revenue of the Member States or the conditions of their markets being appreciably affected;
Whereas the structure of the excise duty on cigarettes must include, in addition to a specific component calculated per unit of the product, a proportional component based on the retail selling price, inclusive of all taxes ; whereas the turnover tax on cigarettes has the same effect as a proportional excise duty and this fact should be taken into account when the ratio between the specific component of the excise and the total tax burden is being established;
Whereas the special provisions to apply during the second stage should be laid down so as to guide the excise duties levied on cigarettes by the Member States towards a common structure;
Whereas Denmark should be granted the right to refrain from enforcing the provisions in Article 12 (1) of Directive 72/464/EEC in Greenland in view of that territory's special situation;
Whereas the introduction of the harmonized taxation system in the United Kingdom without any accompanying adaptation measures might conflict with the health policy applied by the United Kingdom Government;
Whereas the United Kingdom should therefore be authorized, by way of derogation from Article 4 (2) of Directive 72/464/EEC, to charge an additional excise duty on the most harmful cigarettes for a limited period of 30 months from the date of entry into force of the second stage; (1)OJ No C 178, 2.8.1976, p. 11. (2)OJ No C 204, 30.8.1976, p. 1. (3)OJ No L 303, 31.12.1972, p. 1. (4)OJ No L 180, 3.7.1974, p. 30. (5)OJ No L 330, 24.12.1975. p. 51. (6)OJ No L 354, 24.12.1976, p. 33.
Whereas the structure of the excise duty on manufactured tobacco other than cigarettes will be determined at a later date,
Article 1
Article 4 (3) of Directive 72/464/EEC shall be replaced by the following:
"3. At the final stage of harmonization of structures, the same ratio shall be established for cigarettes in all Member States between the specific excise duty and the sum of the proportional excise duty and the turnover tax, in such a way that the range of retail selling prices reflects fairly the difference in the manufacturers' delivery prices."
Article 2
In Article 7 (1) of Directive 72/464/EEC the words "period of 54 months" shall be replaced by "period of 60 months".
Article 3
The following Title shall be inserted in Directive 72/464/EEC:
"TITLE IIa
Special provisions applicable during the second stage of harmonization
Article 10a 1. Without prejudice to the implementation of Article 1 (4), the second stage of harmonization of the structures of the excise duty on manufactured tobacco shall run from 1 July 1978 to 31 December 1980.
2. During this second stage of harmonization Article 10b shall apply.
Article 10b 1. The amount of the specific excise duty on cigarettes shall be established by reference to cigarettes in the most popular price category according to the information available at 1 January each year, beginning 1 January 1978.
2. The specific component of the excise duty may not be less than 5 % or more than 55 % of the amount of the total tax burden resulting from the aggregation of the proportional excise duty, the specific excise duty and the turnover tax levied on these cigarettes.
However, until 31 December 1978, Ireland may apply a specific element which may not be more than 60 % of the amount of the total tax burden.
3. If the excise duty or the turnover tax levied on the price category referred to above is amended after 1 January 1978, the amount of the specific excise duty shall be established by reference to the new total tax burden on the cigarettes referred to in paragraph 1.
4. Notwithstanding Article 4 (1), each Member State may exclude customs duties from the basis for calculating the proportional excise duty on cigarettes.
5. The Member States may levy on cigarettes a minimum excise duty, the amount of which may not exceed 90 % of the sum of the proportional excise duty and the specific excise duty which they levy on the cigarettes referred to in paragraph 1.
Article 10c
By way of derogation from Article 4 (2), the United Kingdom shall be authorized, for a period of 30 months from the date of entry into force of the second stage, to charge an additional excise duty on cigarettes whose tar yield is 20 mg or more.
The total tax burden on the cigarettes to which this additional excise duty applies may not exceed by more than 20 % the total tax burden which would have been imposed if the additional excise duty had not been levied. The ratio between the specific components of the excise duty and the total tax burden must be within the limits determined by this Directive.
Before the entry into force of the second stage, the United Kingdom shall inform the other Member States and the Commission of the method and the criteria used to determine the tar yield of cigarettes."
Article 4
The following sentence shall be added to Article 12 (1) of Directive 72/464/EEC:
"Denmark may refrain from enforcing these provisions in Greenland."
Article 5
This Directive is addressed to the Member States. | [
"UKPGA19770036"
] |
31978L0317 | 1977 | COUNCIL DIRECTIVE of 21 December 1977 on the approximation of the laws of the Member States relating to the defrosting and demisting systems of glazed surfaces of motor vehicles (78/317/EEC)
Having regard to the Treaty establishing the European Economic Community, and in particular Article 100 thereof,
Having regard to the proposal from the Commission,
Having regard to the opinion of the European Parliament (1),
Having regard to the opinion of the Economic and Social Committee (2),
Whereas the technical requirements which motor vehicles must satisfy pursuant to national laws relate inter alia to the defrosting and demisting systems of glazed surfaces of motor vehicles;
Whereas these requirements differ from one Member State to another; whereas it is therefore necessary that all Member States adopt the same requirements either in addition to or in place of their existing rules in order, in particular, to allow the EEC type-approval procedure, which was the subject of Council Directive 70/156/EEC of 6 February 1970 on the approximation of the laws of the Member States relating to the type-approval of motor vehicles and their trailers (3), as amended by Directive 78/315/EEC (4), to be introduced in respect of each type of vehicle;
Whereas it is advisable to draft the technical requirements so that they have the same aim as the work being carried out on the subject in the UN Economic Commission for Europe;
Whereas these requirements apply to motor vehicles in category M1 (the international classification of motor vehicles is given in Annex I to Directive 70/156/EEC);
Whereas the approximation of national laws relating to motor vehicles entails reciprocal recognition by Member States of the checks carried out by each of them on the basis of the common requirements,
Article 1
For the purposes of this Directive, ‘vehicle’ means any motor vehicle in category M1 (as defined in Annex I to Directive 70/156/EEC) intended for use on the road, having at least four wheels and a maximum design speed exceeding 25 km/h.
Article 2
No Member State may refuse to grant EEC type-approval or national type-approval of a vehicle on grounds relating to the defrosting and demisting systems of its glazed surfaces if they satisfy the requirements set out in Annexes I, II, III, IV and V.
Article 3
No Member State may refuse or prohibit the sale, registration, entry into service or use of any vehicle on grounds relating to the defrosting and demisting systems of its glazed surfaces if they satisfy the requirements laid down in Annexes I, II, III, IV and V.
Article 4
The Member State which has granted type-approval shall take the measures required to ensure that it is informed of any modification of a part or characteristic referred to in 2.2 of Annex I. The competent authorities of that State shall determine whether it is necessary to carry out further tests on the modified vehicle type and to prepare a new report. If these tests show that the requirements of this Directive have not been complied with, the modification shall not be authorized.
Article 5
Any amendments necessary to adapt the requirements of Annexes I, II, III, IV, V and VI to technical progress shall be adopted in accordance with the procedure laid down in Article 13 of Directive 70/156/EEC.
However, this procedure shall not apply to amendments introducing requirements for defrosting and demisting systems of glazed surfaces other than those of windscreens.
Article 6
1. Member States shall bring into force the provisions necessary in order to comply with this Directive within 18 months of its notification and shall forthwith inform the Commission thereof.
2 Member States shall ensure that the texts of the main provisions of national law which they adopt in the field covered by this Directive are communicated to the Commission.
Article 7
This Directive is addressed to the Member States. | [
"UKSI19801182"
] |
31978L0318 | 1977 | Council Directive 78/318/EEC of 21 December 1977 on the approximation of the laws of the Member States relating to the wiper and washer systems of motor vehicles
Having regard to the Treaty establishing the European Economic Community, and in particular Article 100 thereof,
Having regard to the proposal from the Commission,
Having regard to the opinion of the European Parliament (1),
Having regard to the opinion of the Economic and Social Committee (2),
Whereas the technical requirements which motor vehicles must satisfy pursuant to national laws relate inter alia to their wipers and washers;
Whereas those requirements differ from one Member State to another ; whereas it is therefore necessary that all Member States adopt the same requirements either in addition to or in place of their existing rules, in order, in particular, to allow the EEC type-approval procedure which was the subject of Council Directive 70/156/EEC of 6 February 1970 on the approximation of the laws of the Member States relating to the type-approval of motor vehicles and their trailers (3), as amended by Directive 78/315/EEC (4), to be introduced in respect of each type of vehicle;
Whereas it is desirable to draft the technical requirements so that they have the same aim as the work being carried out on the subject in the UN Economic Commission for Europe;
Whereas these requirements apply to motor vehicles in category M1 (the international classification of motor vehicles is given in Annex I to Directive 70/156/EEC);
Whereas the approximation of the national laws relating to motor vehicles entails reciprocal recognition by Member States of the checks carried out by each of them on the basis of the common requirements;
Whereas windscreen-washer systems are already marketed both separately and after being fitted to a vehicle ; whereas if it is possible to check them before they are fitted to a vehicle, their free movement may be facilitated by the introduction of EEC type-approval for such systems, which are regarded as separate technical units within the meaning of Article 9a of Directive 70/156/EEC,
Article 1
For the purposes of this Directive, "vehicle" means any motor vehicle in category M1 (as defined in Annex I to Directive 70/156/EEC) intended for use on the road, having at least four wheels and a maximum design speed exceeding 25 km/h.
Article 2
No Member State may refuse to grant EEC type-approval or national type-approval of a vehicle with regard to the windscreen-washer and windscreen-wiper systems, or of a windscreen-washer system, if: - such a vehicle satisfies the requirements of Annexes I to V relating to the windscreen-washer and windscreen-wiper systems,
- such a windscreen-washer system regarded as a separate technical unit within the meaning of Article 9a of Directive 70/156/EEC satisfies the relevant requirements laid down in Annex I,
- such a vehicle is fitted with a windscreen-washer system which has been granted type-approval as a separate technical unit within the meaning of Article 9a of Directive 70/156/EEC and has been installed in accordance with the requirements laid down in 6.2.5 of Annex I.
Article 3
1. No Member State may refuse or prohibit the sale, registration, entry into service or use of any vehicle on grounds relating to: (1)OJ No C 118, 16.5.1977, p. 33. (2)OJ No C 114, 11.5.1977, p. 8. (3)OJ No L 42, 23.2.1970, p. 1. (4)See page 1 of this Official Journal. - its windscreen-wiper and windscreen-washer systems, if these satisfy the requirements laid down in Annexes I to V,
- its windscreen-washer system if this has been granted type-approval as a separate technical unit within the meaning of Article 9a of Directive 70/156/EEC and has been installed in accordance with the requirements laid down in 6.2.5 of Annex I.
2. No Member State may prohibit the placing on the market of any windscreen-washer system regarded as a separate technical unit within the meaning of Article 9a of Directive 70/156/EEC if it conforms to a type which has been granted type-approval within the meaning of the second indent of Article 2.
Article 4
The Member State which has granted type-approval shall take the measures required to ensure that it is informed of any modification of a part or characteristic referred to in 2.2 of Annex I. The competent authorities of that Member State shall determine whether it is necessary to carry out further tests on the modified vehicle type and to prepare a new report. If these tests show that the requirements of this Directive have not been complied with, the modification shall not be authorized.
Article 5
Any amendments necessary to adapt the requirements of Annexes I to VII to technical progress shall be adopted in accordance with the procedure laid down in Article 13 of Directive 70/156/EEC.
However, this procedure shall not apply to amendments introducing requirements for wiper and washer systems other than for the windscreen.
Article 6
1. Member States shall bring into force the provisions necessary in order to comply with this Directive within 18 months of its notification and shall forthwith inform the Commission thereof.
2. Member States shall ensure that the texts of the main provisions of national law which they adopt in the field covered by this Directive are communicated to the Commission.
Article 7
This Directive is addressed to the Member States. | [
"UKSI19801182"
] |
31978L0316 | 1977 | Council Directive 78/316/EEC of 21 December 1977 on the approximation of the laws of the Member States relating to the interior fittings of motor vehicles (identification of controls, tell-tales and indicators)
Having regard to the Treaty establishing the European Economic Community, and in particular Article 100 thereof,
Having regard to the proposal from the Commission,
Having regard to the opinion of the European Parliament [1],
Having regard to the opinion of the Economic and Social Committee [2],
Whereas the technical requirements which motor vehicles must satisfy pursuant to national laws relate inter alia to the identification of controls, tell-tales and indicators;
Whereas these requirements differ from one Member State to another; whereas it is therefore necessary that all Member States adopt the same requirements either in addition to or in place of their existing rules in order, in particular, to allow the EEC type-approval procedure, which was the subject of Council Directive 70/156/EEC of 6 February 1970 on the approximation of the laws of the Member States relating to the type-approval of motor vehicles and their trailers [3], as amended by Directive 78/315/EEC [4];
Whereas it is advisable to draft the technical requirements so that they have the same aim as the work being carried out on the subject in the UN Economic Commission for Europe and as certain technical requirements adopted by the International Organization for Standardization (ISO);
Whereas the approximation of national laws relating to motor vehicles entails reciprocal recognition by Member States of the checks carried out by each of them on the basis of the common requirements,
Article 1
For the purposes of this Directive, "vehicle" means any motor vehicle intended for use on the road, having at least four wheels and a maximum design speed exceeding 25 km/h, with the exception of vehicles which run on rails, agricultural tractors and machinery and public works vehicles.
Article 2
No Member State may refuse to grant EEC type-approval or national type-approval of a vehicle on grounds relating to the identification of controls, telltales and indicators, if these satisfy the requirements laid down in Annexes I to IV.
Article 3
No Member State may refuse or prohibit the sale, registration, entry into service or use of any vehicle on grounds relating to the identification of controls, telltales and indicators if these satisfy the requirements laid down in Annexes I to IV.
Article 4
Any amendments necessary to adapt the requirements of Annexes I to V to technical progress shall be adopted in accordance with the procedure laid down in Article 13 of Directive 70/156/EEC.
Article 5
1. Member States shall bring into force the provisions necessary in order to comply with this Directive within 18 months of its notification and shall forthwith inform the Commission thereof.
2. Member States shall ensure that the texts of the main provisions of national law which they adopt in the field covered by this Directive are communicated to the Commission.
Article 6
This Directive is addressed to the Member States. | [
"UKSI19801182"
] |
31978L0176 | 1978 | Council Directive 78/176/EEC of 20 February 1978 on waste from the titanium dioxide industry
Having regard to the Treaty establishing the European Economic Community, and in particular Articles 100 and 235 thereof,
Having regard to the proposal from the Commission,
Having regard to the opinion of the European Parliament (1),
Having regard to the opinion of the Economic and Social Committee (2),
Whereas waste from the titanium dioxide industry is liable to be harmful to human health and the environment ; whereas it is therefore necessary to prevent and gradually reduce pollution caused by such waste with a view to eliminating it;
Whereas the 1973 (3) and 1977 (4) European Communities' Programmes of Action on the Environment refer to the need to undertake Community action against waste from the titanium dioxide industry;
Whereas any disparity between the provisions on waste from the titanium dioxide industry already applicable or in preparation in the various Member States may create unequal conditions of competition and thus directly affect the functioning of the common market ; whereas it is therefore necessary to approximate laws in this field, as provided for in Article 100 of the Treaty;
Whereas it seems necessary for this approximation of laws to be accompanied by Community action so that one of the aims of the Community in the sphere of protection of the environment and improvement of the quality of life can be achieved by more extensive rules ; whereas certain specific provisions to this effect should therefore be laid down ; whereas Article 235 of the Treaty should be invoked as the powers required for this purpose have not been provided for by the Treaty;
Whereas Directive 75/442/EEC (5), concerns waste disposal in general ; whereas for waste from the titanium dioxide industry it is advisable to lay down a special system which will ensure that human health and the environment are protected against the harmful effects caused by the uncontrolled discharge, dumping or tipping of such waste;
Whereas in order to attain these objectives there should be a system of prior authorization as regards the discharge, dumping, storage, tipping or injecting of waste ; whereas the issue of this authorization should be made subject to specific conditions;
Whereas discharge, dumping, storage, tipping and injecting of waste must be accompanied both by monitoring of the waste and monitoring and surveillance of the environment concerned;
Whereas for existing industrial establishments Member States must, by 1 July 1980, draw up programmes for the progressive reduction of pollution caused by such waste with a view to its elimination ; whereas these programmes must fix the general reduction targets to be attained by 1 July 1987 at the latest and indicate the measures to be taken for each establishment;
Whereas for new industrial establishments Member States must issue a prior authorization ; whereas such authorization must be preceded by an environmental impact study and may be granted only to firms which undertake to use only those materials, processes and techniques available on the market that are least damaging to the environment,
Article 1
1. The aim of this Directive is the prevention and progressive reduction, with a view to its elimination, of pollution caused by waste from the titanium dioxide industry. (1)OJ No C 28, 9.2.1976, p. 16. (2)OJ No C 131, 12.6.1976, p. 18. (3)OJ No C 112, 20.12.1973, p. 3. (4)OJ No C 139, 13.6.1977, p. 3. (5)OJ No L 194, 25.7.1975, p. 39.
2. For the purpose of this Directive: (a) "pollution" means the discharge by man, directly or indirectly, of any residue from the titanium dioxide manufacturing process into the environment, the results of which are such as to cause hazards to human health, harm to living resources and to ecosystems, damage to amenities or interference with other legitimate uses of the environment concerned;
(b) "waste" means: - any residue from the titanium dioxide manufacturing process of which the holder disposes or is obliged to dispose under current national legislation;
- any residue from a treatment process of a residue referred to in the first indent;
(c) "disposal" means: - the collection, sorting, transport and treatment of waste as well as its storage and tipping above ground or underground and its injection into the ground;
- the discharge thereof into surface water, ground water and the sea, and dumping at sea;
- the transformation operations necessary for its re-use, recovery or recycling;
(d) "existing industrial establishments" means those industrial establishments already set up on the date of notification of this Directive;
(e) "new industrial establishments" means those industrial establishments which are in the process of being set up on the date of entry into force of this Directive or which are set up after that date. Extensions to existing industrial establishments leading to an increase of 15 000 tonnes per year or more in the titanium dioxide on-site production capacity of the establishment concerned shall be treated as new industrial establishments.
Article 2
Member States shall take the necessary measures to ensure that waste is disposed of without endangering human health and without harming the environment, and in particular: - without risk to water, air, soil and plants and animals;
- without deleteriously affecting beauty-spots or the countryside.
Article 3
Member States shall take appropriate measures to encourage the prevention, recycling and processing of waste, the extraction of raw materials and any other process for the re-use of waste.
Article 4
1. The discharge, dumping, storage, tipping and injection of waste are prohibited unless prior authorization is issued by the competent authority of the Member State in whose territory the waste is produced. Prior authorization must also be issued by the competent authority of the Member State - in whose territory the waste is discharged, stored, tipped or injected;
- from whose territory it is discharged or dumped.
2. Authorization may be granted for a limited period only. It may be renewed.
Article 5
In the case of discharge or dumping, the competent authority may, in accordance with Article 2 and on the basis of the information supplied in accordance with Annex I, grant the authorization referred to in Article 4 provided that: (a) the waste cannot be disposed of by more appropriate means;
(b) an assessment carried out in the light of available scientific and technical knowledge shows that there will be no deleterious effect, either immediate or delayed, on the aquatic environment;
(c) there is no deleterious effect on boating, fishing, leisure activities, the extraction of raw materials, desalination, fish and shellfish breeding, on regions of special scientific importance or on other legitimate uses of the waters in question.
Article 6
In the case of storage, tipping or injection, the competent authority may, in accordance with Article 2, and on the basis of the information supplied in accordance with Annex I, grant the authorization referred to in Article 4, provided that: (a) the waste cannot be disposed of by more appropriate means;
(b) an assessment carried out in the light of available scientific and technical knowledge shows that there will be no detrimental effect, either immediate or delayed, on underground waters, the soil or the atmosphere;
(c) there is no deleterious effect on leisure activities, the extraction of raw materials, plants, animals, on regions of special scientific importance or on other legitimate uses of the environment in question.
Article 7
1. Irrespective of the method and extent of treatment of the waste in question, its discharge, dumping, storage, tipping and injection shall be accompanied by the monitoring referred to in Annex II of the waste and of the environment concerned having regard to its physical, chemical, biological and ecological aspects.
2. The monitoring operations shall be carried out periodically by one or more bodies appointed by the Member State the competent authority of which has issued the authorization provided for in Article 4. In the case of cross-frontier pollution between Member States, the body in question shall be appointed jointly by the parties concerned.
3. Within one year of notification of this Directive, the Commission shall submit to the Council a proposal on the procedures for the surveillance and monitoring of the environments concerned. The Council shall act on this proposal within six months of the publication of the opinion of the European Parliament and that of the Economic and Social Committee in the Official Journal of the European Communities.
Article 8
1. The competent authority in the Member State concerned shall take all appropriate steps to remedy one of the following situations and, if necessary, shall require the suspension of discharge, dumping, storage, tipping or injection operations: (a) if the results of the monitoring provided for in Annex II (A) (1) show that the conditions for the prior authorization referred to in Articles 4, 5 and 6 have not been fulfilled, or
(b) if the results of the acute toxicity tests referred to in Annex II (A) (2) show that the limits laid down therein have been exceeded, or
(c) if the results of the monitoring provided for in Annex II (B) reveal a deterioration in the environment concerned in the area under consideration, or
(d) if discharge or dumping produces a deleterious effect on boating, fishing, leisure activities, the extraction of raw materials, desalination, fish and shellfish breeding, on regions of special scientific importance or on other legitimate uses of the waters in question, or
(e) if storage, tipping or injection produces a deleterious effect on leisure activities, the extraction of raw materials, plants, animals, on regions of special scientific importance or on other legitimate uses of the environments in question.
2. If several Member States are concerned, the measures shall be taken after consultation.
Article 9
1. Member States shall draw up programmes for the progressive reduction and eventual elimination of pollution caused by waste from existing industrial establishments.
2. The programmes mentioned in paragraph 1 shall set general targets for the reduction of pollution from liquid, solid and gaseous waste, to be achieved by 1 July 1987 at the latest. The programmes shall also contain intermediate objectives. They shall, moreover, contain information on the state of the environment concerned, on measures for reducing pollution and on methods for treating waste that is directly caused by the manufacturing processes.
3. The programmes referred to in paragraph 1 shall be sent to the Commission by 1 July 1980 at the latest so that it may, within a period of six months after receipt of all the national programmes, submit suitable proposals to the Council for the harmonization of these programmes in regard to the reduction and eventual elimination of pollution and the improvement of the conditions of competition in the titanium dioxide industry. The Council shall act on these proposals within six months of the publication of the opinion of the European Parliament and that of the Economic and Social Committee in the Official Journal of the European Communities.
4. Member States shall introduce a programme by 1 January 1982 at the latest.
Article 10
1. The programmes referred to in Article 9 (1) must cover all existing industrial establishments and must set out the measures to be taken in respect of each of them.
2. Where, in particular circumstances, a Member State considers that, in the case of an individual establishment, no additional measures are necessary to fulfil the requirements of this Directive, it shall, within six months of notification of this Directive, provide the Commission with the evidence which has led it to that conclusion.
3. After conducting any independent verification of the evidence that may be necessary, the Commission may agree with the Member State that it is not necessary to take additional measures in respect of the individual establishment concerned. The Commission must give its agreement, with reasons, within six months.
4. If the Commission does not agree with the Member State, additional measures in respect of that establishment shall be included in the programme of the Member State concerned.
5. If the Commission does agree, its agreement will be periodically reviewed in the light of the results of the monitoring carried out pursuant to this Directive and in the light of any significant change in the manufacturing processes or in environmental policy objectives.
Article 11
New industrial establishments shall be subject to applications for prior authorization made to the competent authorities of the Member State on whose territory it is proposed to build the establishments. Such authorizations must be preceded by environmental impact surveys. They may be granted only to firms which give an undertaking to use only such of the materials, processes and techniques available on the market as are least damaging to the environment.
Article 12
Without prejudice to this Directive, Member States may adopt more stringent regulations.
Article 13
1. For the purposes of this Directive, Member States shall supply the Commission with all the necessary information relating to: - the authorizations issued pursuant to Articles 4, 5 and 6,
- the results of the monitoring of the environment concerned carried out pursuant to Article 7,
- the measures taken pursuant to Article 8.
They shall also supply the Commission with general information concerning the materials, processes and techniques notified to them pursuant to Article 11.
2. Information acquired as a result of the application of this Article may be used only for the purposes of this Directive.
3. The Commission and the competent authorities of the Member States, their officials and other servants shall not disclose information acquired by them pursuant to this Directive and of a kind covered by the obligation of professional secrecy.
4. Paragraphs 2 and 3 shall not prevent publication of general information or surveys which do not contain information relating to particular undertakings or associations of undertakings.
Article 14
Every three years the Member States shall prepare a report on the prevention and progressive reduction of pollution caused by waste from the titanium dioxide industry and shall forward it to the Commission, which shall communicate it to the other Member States.
The Commission shall report every three years to the Council and the European Parliament on the application of this Directive.
Article 15
1. Member States shall bring into force the measures needed to comply with this Directive within 12 months, of its notification and shall forthwith inform the Commission thereof.
2. Member States shall communicate to the Commission the texts of the national laws which they adopt in the field covered by this Directive.
Article 16
This Directive is addressed to the Member States. | [
"UKPGA19740040"
] |
31978L0319 | 1978 | Council Directive 78/319/EEC of 20 March 1978 on toxic and dangerous waste
Having regard to the Treaty establishing the European Economic Community, and in particular Articles 100 and 235 thereof,
Having regard to the proposal from the Commission,
Having regard to the opinion of the European Parliament (1),
Having regard to the opinion of the Economic and Social Committee (2),
Whereas any disparity between the provisions on disposal of toxic and dangerous waste already applicable or in preparation in the various Member States may create unequal conditions of competition and thus directly affect the functioning of the common market ; whereas it is therefore necessary to approximate laws in this field, as provided for in Article 100 of the Treaty;
Whereas it seems necessary that this approximation of laws be accompanied by Community action so that one of the aims of the Community in the sphere of protection of the environment and improvement of the quality of life can be achieved by more extensive rules ; whereas certain specific provisions to this effect should therefore be laid down ; whereas Article 235 of the Treaty should be invoked as the powers required for this purpose have not been provided for by the Treaty;
Whereas the 1973 (3) and 1977 (4) programmes of action of the European Communities on the environment stress the need for Community action in order to control the disposal of toxic and dangerous waste;
Whereas the essential objective of all provisions relating to the disposal of toxic or dangerous waste must be the protection of human health and the safeguarding of the environment against harmful effects caused by the collection of toxic and dangerous waste as well as its carriage, treatment, storage and tipping;
Whereas the prevention, recycling and recovery of toxic and dangerous waste and the use of recovered materials should be encouraged in order to conserve natural resources;
Whereas in order to ensure an effective protection of the environment, provision should be made for a uniform system of permits for undertakings which store, treat and/or tip toxic and dangerous waste ; whereas unauthorized holders of toxic and dangerous waste should have it stored and/or treated only by authorized undertakings;
Whereas that proportion of the cost of the disposal of toxic and dangerous waste not covered by the proceeds of treating the waste must be defrayed in accordance with the "polluter pays" principle; (1)OJ No C 30, 17.2.1977, p. 27. (2)OJ No C 77, 30.3.1977, p. 5. (3)OJ No C 112, 20.12.1973, p. 3. (4)OJ No C 139, 13.6.1977, p. 3.
Whereas provision should be made for a system of monitoring and supervision of all installations, establishments, or undertakings which produce, hold or dispose of toxic and dangerous waste, for the keeping of proper records regarding disposal, to ensure that any carriage of toxic and dangerous waste in the course of its disposal is accompanied by an identification form, and for the drawing up of programmes which take into account the various waste disposal operations;
Whereas, in order to coordinate action in this field, Member States should draw up a situation report on the disposal of toxic and dangerous waste;
Whereas technical progress necessitates rapid adaptation of the list of the toxic and dangerous waste to which this Directive applies ; whereas, in order to facilitate the introduction of the measures required for this purpose, a procedure should be provided for whereby close cooperation would be established between the Member States and the Commission within a Committee on Adaptation to Technical Progress established under this Directive,
Article 1
For the purposes of this Directive: (a) "waste" means any substance or object which the holder disposes of or is required to dispose of pursuant to the provisions of national law in force;
(b) "toxic and dangerous waste" means any waste containing or contaminated by the substances or materials listed in the Annex to this Directive of such a nature, in such quantities or in such concentrations as to constitute a risk to health or the environment;
(c) "disposal" means - the collection, sorting, carriage and treatment of toxic and dangerous waste, as well as its storage and tipping above or under ground;
- the transformation operations necessary for its recovery, re-use or recycling.
Article 2
When Member States which are parties to one or more international conventions concerning the carriage of dangerous goods are applying those conventions, this shall be adequate for the purposes of this Directive so far as carriage is concerned, provided that the measures being applied in implementation of the conventions are at least as stringent as those required for the implementation of the Directive.
Article 3
The following shall be excluded from the scope of this Directive: (a) radioactive waste;
(b) animal carcases and agricultural waste of faecal origin;
(c) explosives;
(d) hospital waste;
(e) effluents discharged into sewers and water-courses;
(f) emissions to the atmosphere;
(g) household waste;
(h) mining waste;
(i) other toxic and dangerous waste covered by specific Community rules.
Article 4
Member States shall take appropriate steps to encourage, as a matter of priority, the prevention of toxic and dangerous waste, its processing and recycling, the extraction of raw materials and possibly of energy therefrom and any other process for the re-use of such waste.
Article 5
1. Member States shall take the necessary measures to ensure that toxic and dangerous waste is disposed of without endangering human health and without harming the environment, and in particular: - without risk to water, air, soil, plants or animals;
- without causing a nuisance through noise or odours;
- without adversely affecting the countryside or places of special interest.
2. Member States shall in particular take the necessary steps to prohibit the abandonment and uncontrolled discharge, tipping or carriage of toxic and dangerous waste, as well as its consignment to installations, establishments or undertakings other than those referred to in Article 9 (1).
Article 6
Member States shall designate or establish the competent authority or authorities to be responsible, in a given area, for the planning, organization, authorization and supervision of operations for the disposal of toxic and dangerous waste.
Article 7
Member States shall take the necessary steps to ensure that: - toxic and dangerous waste is, where necessary, kept separate from other matter and residues when being collected, transported stored or deposited;
- the packaging of toxic and dangerous waste is appropriately labelled, indicating in particular the nature, composition and quantity of the waste;
- such toxic and dangerous waste is recorded and identified in respect of each site where it is or has been deposited.
Article 8
Member States may at any time take more stringent measures with regard to toxic and dangerous waste than those provided for in this Directive.
Article 9
1. Installations, establishments or undertakings which carry out the storage, treatment and/or deposit of toxic and dangerous waste must obtain a permit from the competent authorities. Such waste may be stored, treated, and/or deposited only by installations, establishments or undertakings holding such permits. Undertakings engaged in the carriage of toxic and dangerous waste shall be controlled by the competent authorities of the Member States.
2. The permit referred to in paragraph 1 shall cover in particular: - the type and quantity of waste;
- the technical requirements;
- the precautions to be taken;
- the disposal site(s);
- the methods of disposal.
This permit may also lay down the specific information to be made available at the request of the competent authorities.
3. Permits may include conditions and obligations. They may be granted for a specified period and may be renewed.
Article 10
Any person producing or holding toxic and dangerous waste without the permit referred to in Article 9 (1) shall as soon as possible have such waste stored, treated and/or deposited by an installation, establishment or undertaking authorized to do so under the said Article.
Article 11
1. In accordance with the "polluter pays" principle, the cost of disposing of toxic and dangerous waste, less any proceeds from treating the waste, shall be borne by:
- the holder who has waste handled by a waste collector or by an installation, establishment or undertaking referred to in Article 9 (1);
and/or
- the previous holders or the producer of the product from which the waste came.
2. If Member States charge levies on the monies used to cover the costs referred to in paragraph 1, the yield thereof may also be used for the following purposes: - financing control measures relating to toxic and dangerous waste;
- financing research pertaining to the elimination of toxic and dangerous waste.
Article 12
1. The competent authorities shall draw up and keep up to date plans for the disposal of toxic and dangerous waste. The plans shall cover in particular: - the type and quantity of waste to be disposed of;
- the methods of disposal;
- specialized treatment centres where necessary;
- suitable disposal sites.
The competent authorities of the Member States may include other specific aspects, in particular the estimated cost of the disposal operations.
2. The competent authorities shall make public the plans referred to in paragraph 1. The Member States shall forward these plans to the Commission.
3. The Commission, together with the Member States, shall arrange for regular comparisons of the plans in order to ensure that implementation of this Directive is sufficiently coordinated.
Article 13
In cases of emergency or grave danger, Member States shall take all necessary steps, including, where appropriate, temporary derogations from this Directive, to ensure that toxic and dangerous waste is so dealt with as not to constitute a threat to the population or the environment. The Member States shall inform the Commission of such derogations.
Article 14
1. Any installation, establishment, or undertaking which produces, holds and/or disposes of toxic and dangerous waste shall: - keep a record of the quantity, nature, physical and chemical characteristics and origin of such waste, and of the methods and sites used for disposing of such waste, including the dates of receipt and disposal;
and/or
- make this information available to the competent authorities on request.
2. When toxic and dangerous waste is transported in the course of disposal it shall be accompanied by an identification form containing at least the following details: - nature;
- composition;
- volume or mass of the waste;
- name and address of the producer or of the previous holder(s);
- name and address of the next holder or of the final disposer;
- location of the site of final disposal where known.
3. Documentary evidence that the disposal operations have been carried out shall be kept for as long as the Member States deem necessary.
This evidence shall, where necessary, be addressed to the relevant authorities of the Member States concerned.
Article 15
1. Any installation, establishment or undertaking producing holding or disposing of toxic and dangerous waste shall be subject to inspection and supervision by the competent authorities to ensure that the provisions adopted in application of this Directive and the terms of any authorization are fulfilled.
2. To this end, Member States shall take the necessary measures to ensure that the installations, establishments or undertakings concerned afford the representatives of the competent authorities all necessary assistance to enable them to carry out any examinations, inspections or investigations concerning the waste, to take samples and to gather any information necessary for the fulfilment of their duties.
Article 16
1. Every three years, and for the first time three years following the notification of this Directive, Member States shall draw up a situation report on the disposal of toxic and dangerous waste in their respective countries and shall forward it to the Commission. The Commission shall circulate this report to the other Member States.
2. The Commission shall report every three years to the Council and to the European Parliament on the application of this Directive.
Article 17
1. The amendments necessary for adapting this Directive to scientific and technical progress shall be: - to state the name and composition of the toxic and dangerous substances and materials listed in the Annex;
- to add to the Annex toxic and dangerous substances and materials unknown at the time of notification of this Directive.
They shall be adopted in accordance with the procedure referred to in Article 19.
2. In adapting the Annex to technical and scientific progress, account shall be taken of the immediate or long term hazard to man and the environment presented by waste by reason of its toxicity, persistence, bioaccumulative characteristics, physical and chemical structure and/or quantity.
Article 18
1. A Committee for adapting this Directive to technical progress (hereinafter called "the Committee") is hereby set up. It shall consist of representatives of the Member States and be chaired by a representative of the Commission.
2. The Committee shall draw up its rules of procedure.
Article 19
1. Where the procedure laid down in this Article is to be followed, matters shall be referred to the Committee by the chairman, either on his own initiative or at the request of the representative of a Member State.
2. The representative of the Commission shall submit to the Committee a draft of the measures to be adopted. The Committee shall deliver its opinion on the draft within a time limit which may be determined by the chairman according to the urgency of the matter. It shall decide by a majority of 41 votes, the votes of the Member States being weighted as provided for in Article 148 (2) of the Treaty. The chairman shall not vote.
3. (a) The Commission shall adopt the measures envisaged where these are in accordance with the opinion of the Committee.
(b) Where the measures envisaged are not in accordance with the opinion of the Committee, or if no opinion has been given, the Commission shall forthwith propose to the Council the measures to be adopted. The Council shall act by a qualified majority.
(c) If, within three months of the proposal being submitted to it, the Council has not acted, the measures proposed shall be adopted by the Commission.
Article 20
The Member States shall prohibit all acts which intentionally or unintentionally circumvent the provisions of this Directive.
Article 21
1. Member States shall bring into force the measures necessary to comply with this Directive within 24 months of its notification. They shall forthwith inform the Commission thereof.
2. Member States shall communicate to the Commission the texts of the main provisions of national law which they adopt in the field covered by this Directive.
Article 22
This Directive is addressed to the Member States. | [
"UKSI19810196"
] |
31978L0420 | 1978 | Council Directive 78/420/EEC of 2 May 1978 amending Second Directive 75/319/EEC on the approximation of provisions laid down by law, regulation or administrative action relating to proprietary medicinal products
Having regard to the Treaty establishing the European Economic Community, and in particular Article 100 thereof,
Having regard to the proposal from the Commission,
Having regard to the opinion of the European Parliament (1),
Having regard to the opinion of the Economic and Social Committee (2),
Whereas Second Council Directive 75/319/EEC of 20 May 1975 on the approximation of provisions laid down by law, regulation or administrative action relating to proprietary medicinal products (3) set up a Committee for Proprietary Medicinal Products, hereinafter referred to as "the Committee", and entrusted it with the task of giving opinions on whether particular proprietary medicinal products comply with the requirements of Council Directive 65/65/EEC of 26 January 1965 on the approximation of provisions laid down by law, regulation or administrative action relating to proprietary medicinal products (4);
Whereas Articles 9 and 10 of Directive 75/319/EEC provide that, where the Community procedure is to be applied, the Member State which has issued a marketing authorization shall forward a dossier to the Committee which shall forthwith forward the dossier to the competent authorities of the Member States specified by the person responsible for marketing;
Whereas experience has shown that the provision that the dossiers shall pass through the Committee instead of being sent directly to the Member States concerned results in administrative problems in the forwarding of voluminous documentation and in delays in the work of the Committee;
Whereas, in order to solve these problems and to reduce the delays, it is necessary to amend these provisions to enable the Member State which initially issued the marketing authorization to send the dossier directly to the Member States concerned as well as to the Committee,
Article 1
The following shall be substituted for Article 9 of Directive 75/319/EEC:
"Article 9 1. The Member State which has issued a marketing authorization for a proprietary medicinal product shall, if the person responsible for marketing has requested forwarding to at least five other Member States, forward a dossier containing a copy of this request and a copy of the authorization together with the particulars and documents listed in the second paragraph of Article 4 of Directive 65/65/EEC to the Committee and to the competent authorities of the Member States specified.
2. Such forwarding shall be deemed to be equivalent to the submission of an application for marketing authorization, within the meaning of Article 4 of Directive 65/65/EEC, to the said authorities.
3. The Committee shall without delay inform the Member States concerned that the dossier has been received by the Committee."
Article 2
In Article 10 (1) of Directive 75/319/EEC the words "transmission of the information referred to in Article 9 (3)" shall be substituted for "forwarding referred to in Article 9 (2)".
Article 3
This Directive is addressed to the Member States. | [
"UKSI19771038",
"UKSI19771055"
] |
31978L0632 | 1978 | Commission Directive 78/632/EEC of 19 May 1978 adapting to technical progress Council Directive 74/60/EEC on the approximation of the laws of the Member States relating to the interior fittings of motor vehicles (interior parts of the passenger compartment other than the interior rear-view mirrors, layout of controls, the roof or opening roof, the backrest and rear part of the seats)
Having regard to the Treaty establishing the European Economic Community,
Having regard to Council Directive 70/156/EEC of 6 February 1970 on the approximation of the laws of the Member States relating to the type approval of motor vehicles and their trailers (1), as amended by the Act of Accession, and in particular Articles 11, 12 and 13 thereof,
Having regard to Council Directive 74/60/EEC of 17 December 1973 on the approximation of the laws of the Member States relating to the interior fittings of motor vehicles (interior parts of the passenger compartment other than the interior rear-view mirrors, layout of controls, the roof or opening roof, the backrest and rear part of the seats) (2),
Whereas in view of the experience gained and of the state of the art it is now possible to match the requirements more closely to actual test conditions;
Whereas the provisions of this Directive are in accordance with the opinion of the Committee on the Adaptation to Technical Progress of the Directives aimed at the Removal of Technical Barriers to Trade in the Motor Vehicle Sector,
Article 1
The Annexes to Directive 74/60/EEC are amended as shown in the Annex to this Directive.
Article 2
1. With effect from 1 January 1979 no Member State may on grounds relating to the interior fittings of motor vehicles (interior parts of the passenger compartment other than the interior rear-view mirrors, layout of the controls, the roof or opening roof, the backrest and rear part of the seats): - refuse in respect of a type of vehicle to grant EEC-type approval, to issue the document referred to in the last indent of Article 10 (1) of Directive 70/156/EEC, or to grant national type approval ; or
- prohibit the entry into service of vehicles if the interior fittings (interior parts of the passenger compartment other than the interior rear-view mirrors, layout of the controls, the roof or opening roof, the backrest and rear part of the seats) of such type of vehicle or of such vehicles comply with the provisions of Directive 74/60/EEC, as amended by this Directive.
2. With effect from 1 January 1979 Member States: - may no longer issue the document referred to in the last indent of Article 10 (1) of Directive 70/156/EEC in respect of a type of vehicle of which the interior fittings (interior parts of the passenger compartment other than the interior rear-view mirrors, layout of the controls, the roof or opening roof, the backrest and rear part of the seats) do not comply with the provisions of Directive 74/60/EEC, as amended by this Directive,
- may refuse to grant national type approval in respect of a type of vehicle of which the interior fittings (interior parts of the passenger compartment other than the interior rear-view mirrors, layout of the controls, the roof or opening roof, the backrest (1)OJ No L 42, 23.2.1970, p. 1. (2)OJ No L 38, 11.2.1974, p. 2.
and rear part of the seats) do not comply with the provisions of Directive 74/60/EEC, as amended by this Directive.
3. With effect from 1 October 1982 Member States may prohibit the entry into service of vehicles of which the interior fittings (interior parts of the passenger compartment other than the interior rear-view mirrors, layout of the controls, the roof or opening roof, the backrest and rear part of the seats) do not comply with the provisions of Directive 74/60/EEC, as amended by this Directive.
Article 3
The Member States shall bring into force the provisions necessary to comply with this Directive not later than 1 January 1979 and shall forthwith inform the Commission thereof.
Article 4
This Directive is addressed to the Member States. | [
"UKSI19801182"
] |
31978L0507 | 1978 | Commission Directive 78/507/EEC of 19 May 1978 adapting to technical progress Council Directive 76/114/EEC on the approximation of the laws of the Member States relating to statutory plates and inscriptions for motor vehicles and their trailers, and their location and method of attachment
Having regard to the Treaty establishing the European Economic Community,
Having regard to Council Directive 70/156/EEC of 6 February 1970 on the approximation of the laws of the Member States relating to the type approval of motor vehicles and their trailers (1), as amended by the Act of Accession, and in particular to Articles 11, 12 and 13 thereof,
Having regard to Council Directive 76/114/EEC of 18 December 1975 on the approximation of the laws of the Member States relating to statutory plates and inscriptions for motor vehicles and their trailers, and their location and method of attachment (2),
Whereas the International Organization for Standardization (ISO) has now adopted two International Standards relating to a world classification system enabling the manufacturer of a vehicle (3), and also a vehicle (4) to be identified ; whereas it is therefore advisable to incorporate this system of manufacturer identification into Directive 76/114/EEC and, at the same time, to align the requirements of said Directive with the ISO Standard relating to vehicle identification;
Whereas the provisions of this Directive are in accordance with the opinion of the Committee on the Adaptation to Technical Progress of the Directives Aimed at the Removal of Technical Barriers to Trade in the Motor-Vehicle Sector,
Article 1
The Annex to Directive 76/114/EEC is amended as shown in the Annex to this Directive.
Article 2
1. With effect from 1 October 1978 no Member State may on grounds relating to the statutory plates and inscriptions, their location and method of attachment: - refuse in respect of a type of vehicle to grant EEC type-approval, to issue the document referred to in the last indent of Article 10 (1) of Directive 70/156/EEC, or to grant national type-approval, or
- prohibit the entry into service of vehicles,
if the statutory plates and inscriptions, their location and attachment of such type of vehicle or of such vehicles comply with the provisions of Directive 76/114/EEC as amended by this Directive.
2. With effect from 1 October 1981 Member States: - may no longer issue the document referred to in the last indent of Article 10 (1) of Directive 70/156/EEC in respect of a type of vehicle of which the statutory plates and inscriptions, their location and attachment do not comply with the provisions of Directive 76/114/EEC as amended by this Directive;
- may refuse to grant national type-approval in respect of a type of vehicle of which statutory plates and inscriptions, their location and attachment do not comply with the provisions of Directive 76/114/EEC as amended by this Directive.
3. With effect from 1 October 1981 Member States may prohibit the entry into service of vehicles of which the statutory plates and inscriptions, their location and attachment do not comply with the provisions of Directive 76/114/EEC as amended by this Directive.
Article 3
The Member States shall bring into force the provisions necessary to comply with this Directive not later than 1 October 1978 and shall forthwith inform the Commission thereof.
Article 4
This Directive is addressed to the Member States. | [
"UKSI19801182"
] |
31978L0548 | 1978 | Council Directive 78/548/EEC of 12 June 1978 on the approximation of the laws of the Member States relating to heating systems for the passenger compartment of motor vehicles
Having regard to the Treaty establishing the European Economic Community, and in particular Article 100 thereof,
Having regard to the proposal from the Commission,
Having regard to the opinion of the European Parliament (1),
Having regard to the opinion of the Economic and Social Committee (2),
Whereas the technical requirements which motor vehicles must satisfy pursuant to national laws relate inter alia to heating systems for the passenger compartment of motor vehicles;
Whereas these requirements differ from one Member State to another ; whereas it is therefore necessary that all Member States adopt the same requirements either in addition to or in place of their existing rules in order, in particular, to allow the EEC type-approval procedure, which was the subject of Council Directive 70/156/EEC of 6 February 1970 on the approximation of the laws of the Member States relating to the type-approval of motor vehicles and their trailers (3), as last amended by Directive 78/547/EEC (4), to be introduced in respect of each type of vehicle;
Whereas the approximation of national laws relating to motor vehicles entails the mutual recognition by Member States of the inspections carried out by each of them on the basis of the common requirements,
Article 1
For the purposes of this Directive, "vehicle" means any motor vehicle in category M1 (as defined in Annex I to Directive 70/156/EEC) designed for use on the road, having at least four wheels and a maximum design speed exceeding 25 km/h.
Article 2
No Member State may refuse to grant EEC type-approval or national type-approval of a vehicle on grounds relating to the heating system for the passenger compartment if the system satisfies the requirements laid down in Annex I.
Article 3
No Member State may refuse or prohibit the sale, registration, entry into service or use of any vehicle on grounds relating to the heating system for the passenger compartment if the system satisfies the requirements laid down in Annex I.
Article 4
Any amendments necessary to adapt the provisions of the Annexes to take account of technical progress shall be adopted in accordance with the procedure laid down in Article 13 of Directive 70/156/EEC.
This procedure shall also apply to the introduction into this Directive of provisions on auxiliary heating systems intended to be permanently installed in the vehicle.
Article 5
1. Member States shall bring into force the provisions necessary in order to comply with this Directive within 18 months of its notification and shall forthwith inform the Commission thereof.
2. Member States shall ensure that the texts of the main provisions of national law which they adopt in the (1)OJ No C 118, 16.5.1977, p. 29. (2)OJ No C 114, 11.5.1977, p. 6. (3)OJ No L 42, 23.2.1970, p. 1. (4)See page 39 of this Official Journal.
field covered by this Directive are communicated to the Commission.
Article 6
This Directive is addressed to the Member States. | [
"UKSI19801182"
] |
31978L0549 | 1978 | Council Directive 78/549/EEC of 12 June 1978 on the approximation of the laws of the Member States relating to the wheel guards of motor vehicles
Having regard to the Treaty establishing the European Economic Community, and in particular Article 100 thereof,
Having regard to the proposal from the Commission,
Having regard to the opinion of the European Parliament (1),
Having regard to the opinion of the Economic and Social Committee (2),
Whereas the technical requirements which motor vehicles must satisfy pursuant to national laws relate inter alia to the wheel guards of motor vehicles;
Whereas these requirements differ from one Member State to another ; whereas it is therefore necessary that all Member States adopt the same requirements either in addition to or in place of their existing rules in order, in particular, to allow the EEC type-approval procedure which was the subject of Council Directive 70/156/EEC of 6 February 1970 on the approximation of the laws of the Member States relating to the type-approval of motor vehicles and their trailers (3), as last amended by Directive 78/547/EEC (4), to be introduced in respect of each type of vehicle;
Whereas the approximation of national laws relating to motor vehicles entails the mutual recognition by Member States of the inspections carried out by each of them on the basis of the common requirements,
Article 1
For the purposes of this Directive, "vehicle" means any motor vehicle in category M1 (as defined in Annex I to Directive 70/156/EEC) designed for use on the road, having at least four wheels and a maximum design speed exceeding 25 km/h.
Article 2
No Member State may refuse to grant EEC type-approval or national type-approval of a vehicle on grounds relating to the wheel guards if they satisfy the requirements laid down in Annex I.
Article 3
No Member State may refuse or prohibit the sale, registration, entry into service or use of any vehicle on grounds relating to the wheel guards if they satisfy the requirements laid down in Annex I.
Article 4
Any amendments necessary to adapt the provisions of the Annexes to take account of technical progress shall be adopted in accordance with the procedure laid down in Article 13 of Directive 70/156/EEC.
Article 5
1. Member States shall bring into force the provisions necessary in order to comply with this Directive within 18 months of its notification and shall forthwith inform the Commission thereof.
2. Member States shall ensure that the texts of the main provisions of national law which they adopt in the (1)OJ No C 118, 16.5.1977, p. 29. (2)OJ No C 114, 11.5.1977, p. 6. (3)OJ No L 42, 23.2.1970, p. 1. (4)See page 39 of this Official Journal.
field covered by this Directive are communicated to the Commission.
Article 6
This Directive is addressed to the Member States. | [
"UKSI19801182"
] |
31978L0665 | 1978 | Commission Directive 78/665/EEC of 14 July 1978 adapting to technical progress Directive 70/220/EEC on the approximation of the laws of the Member States relating to measures to be taken against pollution of the air by gases from positive ignition engines installed in motor vehicles
Having regard to the Treaty establishing the European Economic Community,
Having regard to Council Directive 70/156/EEC of 6 February 1970 on the approximation of the laws of the Member States relating to the type-approval of motor vehicles and their trailers (1), as amended by the Act of Accession, and in particular Articles 11, 12 and 13 thereof,
Having regard to Council Directive 70/220/EEC of 20 March 1970 on the approximation of the laws of the Member States relating to measures to be taken against pollution of the air by gases from positive-ignition engines of motor vehicles (2), as amended by the Act of Accession, and in particular Article 5 thereof,
Whereas the first European Community programme of action on the environment approved on 22 November 1973 provides that Directives may be amended in order to take account of the most recent scientific progress and more specifically as regards the pollution of air by gases from spark-ignition engines;
Whereas the maximum permissible limits for carbon monoxide and unburnt hydrocarbons emitted by sparkignition engines fitted to motor vehicles were laid down in Directive 70/220/EEC ; whereas these limits were initially reduced by Council Directive 74/290/EEC of 28 May 1974 (3), and permissible limits for nitrogen oxide emissions were added by Commission Directive 77/102/EEC of 30 November 1976 (4);
Whereas the requirements relating to the protection of public health and the environment require a further short term reduction in these limits ; whereas the technical advances made in engine design now enable a reduction of this type to be made without running counter to Community policy aims in other fields and in particular that of the rational use of energy;
Whereas the measures provided for in this Directive are in accordance with the opinion of the Committee on the Adaptation to Technical Progress of the Directives aimed at the Removal of Technical Barriers to Trade in the Motor-Vehicle Sector,
Article 1
Annexes I, II, III, V and VII to Directive 70/220/EEC, as amended by Directive 74/290/EEC and by Directive 77/102/EEC, are hereby amended in accordance with the Annex to this Directive. (1)OJ No L 42, 23.2.1970, p. 1. (2)OJ No L 76, 6.4.1970, p. 1. (3)OJ No L 159, 15.6.1974, p. 61. (4)OJ No L 32, 3.2.1977, p. 32.
Article 2
1. From 1 April 1979, the Member States shall neither, on grounds relating to air pollution by gases from an engine: - refuse to grant EEC type-approval, or to issue the documents referred to in the last indent of Article 10 (1) of Directive 70/156/EEC, or to grant national type-approval of a type of motor vehicle, nor
- prohibit the entry into service of such vehicles,
where the level of gaseous pollutants emitted from this type of motor vehicle or from such vehicles meets the requirements of Directive 70/220/EEC, as last amended by this Directive.
2. From 1 October 1979, Member States: - shall no longer issue the document provided for in the last indent of Article 10 (1) of Directive 70/156/EEC in respect of a type of motor vehicle which emits gaseous pollutants at levels which do not meet the requirements of Directive 70/220/EEC, as last amended by this Directive,
- may refuse national type-approval of a type of motor vehicle which emits gaseous pollutants at levels which do not meet the requirements of Directive 70/220/EEC, as last amended by this Directive.
3. From 1 October 1981, Member States may prohibit the entry into service of vehicles which emit gaseous pollutants at levels which do not meet the requirements of Directive 70/220/EEC, as last amended by this Directive.
4. Before 1 January 1979, Member States shall put into force the provisions required in order to comply with this Directive and shall forthwith inform the Commission thereof.
Article 3
This Directive is addressed to the Member States. | [
"UKSI19801182"
] |
31978L0659 | 1978 | Council Directive 78/659/EEC of 18 July 1978 on the quality of fresh waters needing protection or improvement in order to support fish life
Having regard to the Treaty establishing the European Economic Community, and in particular Articles 100 and 235 thereof,
Having regard to the proposal from the Commission,
Having regard to the opinion of the European Parliament (1),
Having regard to the opinion of the Economic and Social Committee (2),
Whereas the protection and improvement of the environment necessitates concrete measures to protect waters against pollution, including waters capable of supporting freshwater fish;
Whereas it is necessary from the ecological and economic viewpoint to safeguard fish populations from various harmful consequences, resulting from the discharge of pollutant substances into the waters, such as, in particular, the reduction in number of fish belonging to a certain species and even in some cases the disappearance of a number of these species;
Whereas the programmes of action of the European Communities on the environment of 1973 (3) and 1977 (4) provide that quality objectives are to be jointly drawn up fixing the various requirements which an environment must meet, inter alia the definition of parameters for water, including waters capable of supporting freshwater fish;
Whereas differences between the provisions already in force or in preparation in the various Member States as regards the quality of waters capable of supporting the life of freshwater fish may create unequal conditions of competition and thus directly affect the functioning of the common market ; whereas laws in the field should be approximated as provided for by Article 100 of the Treaty;
Whereas it is necessary to couple this approximation of laws with Community action aiming to achieve, by means of wider-ranging provisions, one of the Community's objectives in the field of environmental protection and the improvement of the quality of life ; whereas certain specific provisions must be laid down in this connection ; whereas, since the specific powers of action required to this end have not been provided for in the Treaty, it is necessary to invoke Article 235 thereof;
Whereas, in order to attain the objectives of the Directive, the Member States will have to designate the waters to which it will apply and will have to set limit values corresponding to certain parameters ; whereas action will be taken to ensure that the waters so designated will conform to these values within five years of this designation;
Whereas provision should be made that waters capable of supporting freshwater fish will, under certain conditions, be deemed to conform to the (1)OJ No C 30, 7.2.1977, p. 37. (2)OJ No C 77, 30.3.1977, p. 2. (3)OJ No C 112, 20.12.1973, p. 3. (4)OJ No C 139, 13.6.1977, p. 3.
relevant parametric values even if a certain percentage of samples taken does not comply with the limits specified in the Annex;
Whereas to ensure that the quality of waters capable of supporting freshwater fish is checked, a minimum number of samples should be taken and the measurements relating to parameters set out in the Annex should be carried out ; whereas such sampling may be reduced or discontinued in the light of the quality of the water;
Whereas the Member States are unable to control certain natural circumstances and it is therefore necessary to provide for the possibility of derogating from this Directive in certain cases;
Whereas technical and scientific progress may make necessary the rapid adaptation of certain of the requirements laid down in the Annexes to this Directive ; whereas, in order to facilitate the introduction of the measures required for this purpose, a procedure should be laid down whereby close cooperation would be established between the Member States and the Commission within a Committee on Adaptation to Technical and Scientific Progress,
Article 1
1. This Directive concerns the quality of fresh waters and applies to those waters designated by the Member States as needing protection or improvement in order to support fish life.
2. This Directive shall not apply to waters in natural or artificial fish ponds used for intensive fish-farming.
3. The aim of this Directive is to protect or improve the quality of those running or standing fresh waters which support or which, if pollution were reduced or eliminated, would become capable of supporting fish belonging to: - indigenous species offering a natural diversity, or
- species the presence of which is judged desirable for water management purposes by the competent authorities of the Member States.
4. For the purposes of this Directive: - salmonid waters shall mean waters which support or become capable of supporting fish belonging to species such as salmon (Salmo salar), trout (Salmo trutta), grayling (Thymallus thymallus) and whitefish (Coregonus),
- cyprinid waters shall mean waters which support or become capable of supporting fish belonging to the cyprinids (Cyprinidae), or other species such as pike (Esox lucius), perch (Perca fluviatilis) and eel (Anguilla anguilla).
Article 2
1. The physical and chemical parameters applicable to the waters designated by the Member States are listed in Annex I.
2. For the purposes of applying these parameters, waters are divided into salmonid waters and cyprinid waters.
Article 3
1. Member States shall, for the designated waters, set values for the parameters listed in Annex I, in so far as values are listed in column G or in column I. They shall comply with the comments contained in each of these two columns.
2. Member States shall not set values less stringent than those listed in column I of Annex I and shall endeavour to respect the values in column G taking into account the principle set out in Article 8.
Article 4
1. Member States shall, initially within a two year period following the notification of this Directive, designate salmonid waters and cyprinid waters.
2. Member States may subsequently make additional designations.
3. Member States may revise the designation of certain waters owing to factors unforeseen at the time of designation, taking into account the principle set out in Article 8.
Article 5
Member States shall establish programmes in order to reduce pollution and to ensure that designated waters conform within five years following designation in accordance with Article 4 to both the values set by the Member States in accordance with Article 3 and the comments contained in columns G and I of Annex I.
Article 6
1. For the purposes of implementing Article 5, the designated waters shall be deemed to conform to the provisions of this Directive if samples of such waters, taken at the minimum frequency specified in Annex I at the same sampling point and over a period of 12 months, show that they conform to both the values set by the Member States in accordance with Article 3 and to the comments contained in columns G and I of Annex I, in the case of: - 95 % of the samples for the parameters : pH, BOD5, non-ionized ammonia, total ammonium, nitrites, total residual chlorine, total zinc, and dissolved copper. When the sampling frequency is lower than one sample per month, both the abovementioned values and comments shall be respected for all the samples,
- the percentages listed in Annex I for the parameters : temperature and dissolved oxygen,
- the average concentration set for the parameter : suspended solids.
2. Instances in which the values set by Member States in accordance with Article 3 or the comments contained in columns G and I of Annex I are not respected shall not be taken into consideration in the calculation of the percentages provided for in paragraph 1 when they are the result of floods or other natural disasters.
Article 7
1. The competent authorities in the Member States shall carry out sampling operations, the minimum frequency of which is laid down in Annex I.
2. Where the competent authority records that the quality of designated waters is appreciably higher than that which would result from the application of the values set in accordance with Article 3 and the comments contained in columns G and I of Annex I, the frequency of the sampling may be reduced. Where there is no pollution or no risk of deterioration in the quality of the waters, the competent authority concerned may decide that no sampling is necessary.
3. If sampling shows that a value set by a Member State in accordance with Article 3 or a comment contained in either of columns G or I of Annex I is not respected, the Member State shall establish whether this is the result of chance, a natural phenomenon or pollution and shall adopt appropriate measures.
4. The exact sampling point, the distance from this point to the nearest point where pollutants are discharged and the depth at which the samples are to be taken shall be fixed by the competent authority of each Member State on the basis of local environmental conditions in particular.
5. Certain reference methods of analysis for the parameters concerned are set out in Annex I. Laboratories which employ other methods shall ensure that the results obtained are equivalent or comparable to those specified in Annex I.
Article 8
Implementation of the measures taken pursuant to this Directive may on no account lead, either directly or indirectly, to increased pollution of fresh water.
Article 9
Member States may at any time set more stringent values for designated waters than those laid down in this Directive. They may also lay down provisions relating to other parameters than those provided for in this Directive.
Article 10
When fresh waters cross or form national frontiers between Member States and when one of these States considers designating these waters, these States shall consult each other in order to determine the stretches of such waters to which the Directive might apply and the consequences to be drawn from the common quality objectives ; these consequences shall be determined, after formal consultations, by each State concerned. The Commission may participate in these deliberations.
Article 11
The Member States may derogate from this Directive: (a) in the case of certain parameters marked (0) in Annex I, because of exceptional weather or special geographical conditions;
(b) when designated waters undergo natural enrichment in certain substances, so that the values set out in Annex I are not respected.
Natural enrichment means the process whereby, without human intervention, a given body of water receives from the soil certain substances contained therein.
Article 12
Such amendments as are necessary for adapting to technical and scientific progress: - the G values for the parameters, and
- the methods of analysis,
contained in Annex I shall be adopted in accordance with the procedure laid down in Article 14.
Article 13
1. A Committee on Adaptation to Technical and Scientific Progress (hereinafter called "the Committee"), consisting of representatives of Member States and chaired by a Commission representative, is hereby set up for the purpose laid down in Article 12.
2. The Committee shall draw up its rules of procedure.
Article 14
1. Where the procedure laid down in this Article is to be followed, matters shall be referred to the Committee by its chairman, either on his own initiative or at the request of the representative of a Member State.
2. The Commission representative shall submit to the Committee a draft of the measures to be adopted. The Committee shall deliver its opinion on the draft within a time limit set by the chairman having regard to the urgency of the matter. It shall act by a majority of 41 votes, the votes of the Member States being weighted as provided for in Article 148 (2) of the Treaty. The chairman shall not vote.
3. (a) The Commission shall adopt the measures envisaged where they are in accordance with the opinion of the Committee.
(b) Where the measures envisaged are not in accordance with the opinion of the Committee, or if no opinion is adopted, the Commission shall without delay submit a proposal to the Council concerning the measures to be adopted. The Council shall act by a qualified majority.
(c) If, within three months of the proposals being submitted to it, the Council has not acted, the proposed measures shall be adopted by the Commission.
Article 15
For the purposes of applying this Directive, Member States shall provide the Commission with information concerning: - the waters designated in accordance with Article 4 (1) and (2), in summary form,
- the revision of the designation of certain waters in accordance with Article 4 (3),
- the provisions laid down in order to establish new parameters in accordance with Article 9,
- the application of the derogations from the values listed in column I in Annex I.
More generally, Member States shall provide the Commission, on a reasoned request from the latter, with any information necessary for the application of this Directive.
Article 16
1. Member States shall, five years following the initial designation in accordance with Article 4 (1), and at regular intervals thereafter, submit a detailed report to the Commission on designated waters and the basic features thereof.
2. After prior consent has been obtained from the Member State concerned, the Commission shall publish the information obtained.
Article 17
1. Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with this Directive within two years of its notification. They shall forthwith inform the Commission thereof.
2. Member States shall communicate to the Commission the texts of the main provisions of national law which they adopt in the field governed by this Directive.
Article 18
This Directive is addressed to the Member States. | [
"UKSI19971331",
"UKPGA19750051",
"UKPGA19740040"
] |
Dataset Card for the RegIR datasets
Dataset Summary
The European Union (EU) has a legislation scheme analogous to regulatory compliance for organizations. According to the Treaty on the Functioning of the European Union (TFEU), all published EU directives must take effect at the national level. Thus, all EU member states must adopt a law to transpose a newly issued directive within the period set by the directive (typically 2 years).
Here, we have two datasets, EU2UK and UK2EU, containing EU directives and UK regulations, which can serve both as queries and documents under the ground truth assumption that a UK law is relevant to the EU directives it transposes and vice versa.
Supported Tasks and Leaderboards
The dataset supports:
EU2UK (eu2uk
): Given an EU directive Q, retrieve the set of relevant documents from the pool of all available UK regulations. Relevant documents are those that transpose the EU directive (Q).
UK2EU (uk2eu
): Given a UK regulation Q, retrieve the set of relevant documents from the pool of all available EU directives. Relevant documents are those that are being transposed by the UK regulations (Q).
Languages
All documents are written in English.
Dataset Structure
Data Instances
{
"document_id": "31977L0794",
"publication_year": "1977",
"text": "Commission Directive 77/794/EEC ... of agricultural levies and customs duties",
"relevant_documents": ["UKPGA19800048", "UKPGA19770036"]
}
Data Fields
The following data fields are provided for query documents (train
, dev
, test
):
document_id
: (str) The ID of the document.publication_year
: (str) The publication year of the document.text
: (str) The text of the document.relevant_documents
: (List[str]) The list of relevant documents, as represented by their document_id
.
The following data fields are provided for corpus documents (corpus
):
document_id
: (str) The ID of the document.publication_year
: (str) The publication year of the document.text
: (str) The text of the document.\
Data Splits
EU2UK dataset
Split | No of Queries | Avg. relevant documents |
---|---|---|
Train | 1,400 | 1.79 |
Development | 300 | 2.09 |
Test | 300 | 1.74 |
Document Pool (Corpus): 52,515 UK regulations |
UK2EU dataset
Split | No of Queries | Avg. relevant documents |
---|---|---|
Train | 1,500 | 1.90 |
Development | 300 | 1.46 |
Test | 300 | 1.29 |
Document Pool (Corpus): 3,930 EU directives |
Dataset Creation
Curation Rationale
The dataset was curated by Chalkidis et al. (2021).
The transposition pairs are publicly available by the Publications Office of EU (https://publications.europa.eu/en).
Source Data
Initial Data Collection and Normalization
The original data are available at EUR-Lex portal (https://eur-lex.europa.eu) and Legislation.GOV.UK (http://legislation.gov.uk/) in an unprocessed format.
The transposition pairs are provided by the EU member states (in our case, UK) and were downloaded from the SPARQL endpoint of the Publications Office of EU (http://publications.europa.eu/webapi/rdf/sparql).\
For more information on the dataset curation, read Chalkidis et al. (2021).
Who are the source language producers?
[More Information Needed]
Annotations
Annotation process
- The original data are available at EUR-Lex portal (https://eur-lex.europa.eu) and Legislation.GOV.UK (http://legislation.gov.uk/) in an unprocessed format.
- The transposition pairs are provided by the EU member states (in our case, UK) and were downloaded from the SPARQL endpoint of the Publications Office of EU (http://publications.europa.eu/webapi/rdf/sparql).
Who are the annotators?
Publications Office of EU (https://publications.europa.eu/en)
Personal and Sensitive Information
The dataset does not include personal or sensitive information.
Considerations for Using the Data
Social Impact of Dataset
[More Information Needed]
Discussion of Biases
[More Information Needed]
Other Known Limitations
[More Information Needed]
Additional Information
Dataset Curators
Chalkidis et al. (2021)
Licensing Information
EU Data
© European Union, 1998-2021
The Commission’s document reuse policy is based on Decision 2011/833/EU. Unless otherwise specified, you can re-use the legal documents published in EUR-Lex for commercial or non-commercial purposes.
The copyright for the editorial content of this website, the summaries of EU legislation and the consolidated texts, which is owned by the EU, is licensed under the Creative Commons Attribution 4.0 International licence . This means that you can re-use the content provided you acknowledge the source and indicate any changes you have made.
Source: https://eur-lex.europa.eu/content/legal-notice/legal-notice.html
Read more: https://eur-lex.europa.eu/content/help/faq/reuse-contents-eurlex.html
UK Data
You are encouraged to use and re-use the Information that is available under this licence freely and flexibly, with only a few conditions.
You are free to:
- copy, publish, distribute and transmit the Information;
- adapt the Information;
- exploit the Information commercially and non-commercially for example, by combining it with other Information, or by including it in your own product or application.
You must (where you do any of the above):
acknowledge the source of the Information in your product or application by including or linking to any attribution statement specified by the Information Provider(s) and, where possible, provide a link to this licence: http://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/.
Citation Information
Ilias Chalkidis, Manos Fergadiotis, Nikos Manginas, Eva Katakalou and Prodromos Malakasiotis. Regulatory Compliance through Doc2Doc Information Retrieval: A case study in EU/UK legislation where text similarity has limitations Proceedings of the 16th Conference of the European Chapter of the Association for Computational Linguistics (EACL 2021). Online. 2021
@inproceedings{chalkidis-etal-2021-regir,
title = "Regulatory Compliance through Doc2Doc Information Retrieval: A case study in EU/UK legislation where text similarity has limitations",
author = "Chalkidis, Ilias and Fergadiotis, Manos and Manginas, Nikos and Katakalou, Eva, and Malakasiotis, Prodromos",
booktitle = "Proceedings of the 16th Conference of the European Chapter of the Association for Computational Linguistics (EACL 2021)",
year = "2021",
address = "Online",
publisher = "Association for Computational Linguistics",
url = "https://arxiv.org/abs/2101.10726",
}
Contributions
Thanks to @iliaschalkidis for adding this dataset.
- Downloads last month
- 5