Datasets:

TigerResearch

/

tigerbot-youtube-howto-en-50k

like 1

Follow

Tiger Research 69

Please explain how to make a swan origami washcloth

hi this is Lisa today I'm going to demonstrate how to make this adorable little Swan from a face cloth and a bar of soap it makes a beautiful party favor and I'm making these for my daughter's 16th birthday now I did a lot of research online and it couldn't find a whole lot of things to just using face cloths so what I did was I took a video that I saw from the Carnival Cruise Lines and how to make a swan and I improvised so here we go I'm folding the face cloth in half you want to keep the tag towards the back so that it doesn't get in the way and once I fold it in half I find the center what you want to do is you want to start folding both sides normally I would hold this in my teeth so I can hold it up do this very tightly but for the benefit of the camera I want you to see what I'm doing so you can actually hold this in your teeth while you're doing it and this needs to be rolled very tightly all the way to the center kind of looks almost like a paper airplane when you're done with it but it's rolled up rather than folded so you want to make this nice and tight and the more twist attorneys you have in this the better because it's got a lot of strength to stand up on its own if you do that properly so what you would get is you have a shape like this when you're finished with this part it's smooth on the bottom and then you have these twisty turny here and the next step is to take a simple bobby pin find a good spot to hold it in there and don't worry about this bobby pin because we're going to hide it later in the rest of the decoration so this is going to hold it together so we can work with it you could use pink or blue bobby of baby pins if you want to get fancy for baby showers and obviously this is going to be the back and I'm not sure how tight the tighter this is the better it stays but let's see how it goes so you're just going to kind of work with it a little bit sort of form form the shape that you want it to take it's a little bit loose because that like I said I'm doing this from the table rather than my hands and then there you go you got a cute little Swan take a bar of soap and you can put it on its back and there you go now if you want to get fancy you can take a marker and draw eyes or you could take if you don't want to use the soap you could just take and and bring me the back side up so that it looks like wings this one should this one is a little bit loose so if the shape is not taking as well as this one but you just work with it and put it where you want what a wonderful way to display a baby shower baby shower place placemat or what have you so there you go I hope it helped

Please explain how to make slaked lime with fire and limestone

okay so I've got my aluminum furnace there we've got my crucible with some limestone in it to the lid and then the sound retool and I filled it completely up the one I'm just going to do is I'm going to like this and get it to bird down and get a good better cold some put the limestone B in it and then fill it back up Coleman air mattress inflator to get some heat going and we've got to get it around nine hundred to about twelve hundred degrees Fahrenheit to get the chemicals to change alright so we're now we've got it we burned it for a couple hours so we're just going to pull it out all right and you've gotta realize that we've made lime and lime is very corrosive so you want to make sure that you have some eye protection on the jury carefully now this is really just a proof of concept it's it's kind of a small furnace and we're gonna do this in larger quantities is how to perfect the technique as we go along but basically now that we've cooked it we can add water because of the chemical changes in the limestone when you add water it turns into a paste now I've overcooked and burnt some of that lime actually got hot enough to melt aluminium rather quickly I got it up to about fifteen hundred degrees or so well my best estimate which is too hot and I burnt some of it so some of this did not turn into paste some of it stayed is gravel but as I add more water and stir it up it turns more and more into putty and then what we do you could put it in a bucket under water with that lime wash that milk milky looking lime water and let it sit and this is something that the longer it sits the better quality of product so you know after about a mom to do good just like lot okay and so we've just turned this up for a little while I want to get to a nice little flurry and that's with a paste consistency you know - the gravel that that I had Bert I just go with the bucket right and that's all there is

Please explain how to clean suede and nubuck

what's up guys it is Spencer and today I have a video for you guys about how to clean shoes with suede or nubuck just thing I'm gonna be using for this video is salt a soft sole suede and new buck kit you know - from finish line I think even Foot Locker and a bunch of other stores you can buy it there it comes with two things these two things it comes with a eraser that has two sides one persuade one for new bucks and a brush so you always have that and yeah so I'm not gonna say much more real quick I do want to say though the reason I picked this is because of how easy it is to get you can buy it from a whole bunch of stores and you know you don't have to order online I do like Jason mark a lot right now my unboxing video of Jason mark the essentials kit is already up so you can go check that out I'll put a link down below and I'll also have a review and a tutorial on how to use Jason marks tomorrow so make sure to look out for that but the reason I'm using social is just because it is very cheap owes like 5 bucks for the kit and it really is something that you can find anywhere so I'm not gonna say much more let's get into how to paint your shoes so here is the pair of shoes that I will be using they are the Jordan 2012 in the wolf gray in volt colorway now this shoe uses pretty much just nubuck so that would mean I will be using it the grey part of the eraser the gray is for nubuck it is a little bit more tougher it feels rougher and the white part feels almost like a eraser that you'd use for pencil pencil marks it's a lot more soft but because this is nubuck I will be using the grey part of the eraser so I do have some spots on the shoe as you can see that line right there I'm gonna try to get rid of that on the toe on this pair I could do some work on and yeah so there this part it's kind of dirty back here so I'm gonna try to get that done so without saying much more let's get into it alright so here we are at this part of this shoe so I'm just gonna start rubbing away with the gray part of the eraser so as you can see I'm just rubbing away and as you can see it's taking the mark away pretty well it's not damaging this way too much it is making it a little bit of a lighter color but I will go over with the brush and try to take that back to the way it was so just trying to rub this back part out and yeah and there we are there's a little spot right there so that's looking really well really really good actually let me see if I can get you wanna just take the brush and see if you can do anything with that so I say that turned out very very well as you can see you can barely notice that there was ever a mark there so that's that I'm also gonna move to the other shoe where there is dirt on one of the panels so let's get over to that so here is the panel where there's dirt all over it I don't know if the camera can really pick it up but there is dirt all over it and let's see if I can get this out this time so right away it like makes the dirt disappear it really does make a difference get all the spots very effective tool and especially for $5.00 I would say pick it up because you never know even if you don't have any suede shoes $5.00 is in something you know you really have to you know question because it is $5.00 it's pretty inexpensive and you know if you ever got a pair of suede shoes and you need to clean them you know you'd have something to clean them with so boom let me see if I can go back over it with the brush a little bit that looks amazing that really does make a difference so one last spot real quick let's see if we can touch that up maybe just a little bit um it's got some dirt on there let's see if I can let's see so yep it's coming off pretty well and boom just go over it with the brush a little bit and there you go so pretty much it did an absolutely amazing job on both the shoes I was able to remove pretty much all the spots of the shoe that were dirty it makes the shoe look really really good and yeah I definitely recommend this product especially for the price five dollars not something you can go wrong with so that is that the soft sole suede and new buck it cleans and restores all suede and new bucks if you want to read all this you can go ahead and pause the video so 4.99 great price great great product the race is a little bit dirty but it's alright there's always another corner so pretty much that's it for you guys today look out for the Jason mark review and tutorial tomorrow and I'll see you guys later well that's really doing that piece

Please explain how to make blueberry bran muffins

Sara from average Betty here and I'm making blueberry bran muffins this recipe is from Lucy liens cookbook made in America and when I saw huckleberries blueberry bran muffins from chef Zoe Nathan I had to make them immediately like spray tans and Botox people all over Los Angeles go crazy for these things let's make huckleberries blueberry bran muffins in a bowl combine melted butter brown sugar and salt whisk this together add an egg and whisk again here's maple syrup honey and canola oil I'm going to whisk this again until it's emulsified like this add flour toasted wheat germ baking soda and yogurt okay I told you I had to make this immediately and I don't have any yogurt so I'm gonna use buttermilk instead you want to stir this just until it's combined fill the muffin cups about 3/4 full then top with a generous amount of blueberries and a crumble of brown sugar bake in the oven until they're golden brown and there you have it chef Zoe Nathan's huckleberry blueberry bran muffins they're sweet and substantial I love the maple flavor I'm totally making these again with yogurt but the buttermilk works get the blueberry bran muffin recipe at average Betty calm straight in and Botox sold separately thanks for watching see you next time very Brown muffin

Please explain how to bake lemon poppy seed muffins

2 ⅓ cup all purpose flour ½ tsp. salt 1 tsp. baking powder ½ tsp. baking soda 9/10 cup sugar ¼ cup oil ½ cup butter (1 stick), room temp. 2 large eggs one fresh lemon zest of one lemon 1 tsp. vanilla extract + 2 tbsp. poppy seed 1 ½ cups Greek yogurt Cream together butter, oil and sugar. Add in large eggs one at a time, mixing in between. Toss in lemon zest and vanilla extract, mix. Add in half the Greek yogurt, mix. Add in the other half and mix till fully incorporated. Scrape down the bowl Fold in half of the dry ingredients at a time until batter is evenly mixed. Add poppy seeds and mix till evenly distributed Line muffin tin with paper liners Fill each tin ¾ full with batter Bake muffins in preheated 375ºF (190 ºC) oven for 15-20 minutes until lightly golden. *optional* Squeeze 2 tbsp. fresh lemon juice Add ½ cup sifted confectioner's sugar Stir together fresh lemon juice and sifted confectioner's sugar until it forms a glaze. Dip or drizzle each muffin with glaze. Ready to be eaten whenever you want~

Please explain how to make a simple dress

hi we're back to my channel is me Jenny P so today I'm back with another DIY and this is the dress I'm wearing now it's super easy and simple to make so I got this fabric this is a one year fabric and it's like silk fabric I got it from online then I used a one of my top as guideline to achieve this look they style so I hope you guys enjoyed this video and please - thumbs up and yeah stay tuned and let's get down - so here is the public eye double fold age before I thought so as you can see I'm going to call it on hold so I'll now place my so on the fabric and I mock we are our course holiday neckline from the neckline to the unfold so I like to add more seam allowance is filter I adjust later than is tight why add mostly my lot the way melodies we haven't played around these walls to my remove it oh I'm going to cut for the mark wine so here is the two pieces I caught the phone business I call the back line so I have my back pieces and compitent I lay together now I'm going to sew on the shoulder and they both sides so yeah is the dress I made so I just met so the next I am going to peel and fold the neckline and unhook going to pin and fold it announce him round the edges of the neckline close to I get up thumb is belly outside I don't want always was left stones which is leading us love is all will ever trust ya know I don't always with love we'll go through the wastelands through the highways so my shadow through the sun rays and so here is the dress I try to cut off the excess thread and the next step is to attach the elastic bar on the waist so what I did was I would dress and measure from the neckline to my belly button so now I'm going to measure on the dress and mock my belly button we are out RTLS pizza we'll go through the wastelands through the highways through my shadow through the sunrays so I use the ruler to mark a line so this line is going to be as a guide so so the elastic path I chose to do it this way so you can do whichever way you like now as you can see you are swinging elastic only twists and I stretch the elastic band as I saw to see the her I'm going to surround the dress so how is they look so the next step is to hold and can be bottom of the dress and it's finished so like I said this is super easy and simple to make when you need a few sewing machine a fabric saying you're done so I hope you enjoy this video please feel free to leave your comment below if you have any 15 and if you are new watching please subscribe to my channel yeah and don't forget to thumbs up and see you on my nest thank you bye we'll go Oh along the way melodies we haven't played now I don't know go in around these walls fighting to create a song I don't

Please explain how to make a mini gift bag - easy diy holiday crafts

hi guys wendy here today i wanted to share with you on how to make these really cute mini gift bags i've created for you so let's get started to make these mini gift bags the first thing you're going to need to do is to go to my website at drawsecute.com and download these templates i've created for you so um i made a the gift cards um last week with a video and you guys told me how much you loved my polar bear that was giving hugs so i decided to make that one for you and also i have the really cute penguin my draw so cute penguin and i also have a blank one where you can make whatever you like you can decorate this panel whatever you want to do and that's what i'm going to show you today and so what you want to do is when you print these templates out to print it on stock paper so paper that's a little bit harder just so that your bag will be nice and nice and stiff so that it won't fall apart too easily but you don't have to i did make a sample right here when i was first trying it out and this is just made out of regular xerox paper so as you can see it still works but it's just a little bit softer so it's really up to you if you don't have stock paper you can still use regular paper the tools that you're going to need to use to make these gift bags is a scissor any kind of straight edge markers color pencils anything you want to decorate your gift bag with and these are optional right here the ribbon for the handle an exacto knife if you have one that you don't have to you can use a scissor or a and a hole puncher for the hose on the side to put the ribbon through but if you don't have a hole puncher you can always use an exacto knife and just dig out the hole i'm going to show you what i'm going to be drawing here on this blank one and of course it's going to be something related to pushing cat so let's get started continue this down a little bit more and then right here i'm going to pop out a little foot and right here and pop out another one and i'm going to connect it to the bottom and right here just connect this one right here and the tail so i'm going to come about right here and just draw a little curved tail comes down and in draw some stripes and let's go in and bring this pusheen cat to life so we come here in the center i'm going to draw my center stripe and come to make draw the other two and then i'm going to come right down the center once again i'm going to draw the mouth so i'm going to be drawing kind of like a j backwards j and then now i can go to both sides and draw a circle for the eyes so right here another one and then come in here just give yourself a little highlight if you want and then shade in the rest there and then now we can draw the gingerbread so the gingerbread's head is right under the mouth so i'm going to come out right here and pop out a curve for the gingerbread's head and then right here we draw short little arms and then from there i'm going to draw the pusheen's hands and if you're using your pencil just draw the whole gingerbread first but i don't want to have to erase my sharpie so i'm going to come here and just pop out a curve for the pusheen's hands so same thing right here and then i'm going to finish the rest of the body so i'm going to come down right there and start to curve in the legs there and so i'm making this uh gingerbread cookie really big of course so just so you can see a little bit better so let me come in here and just draw these two little dots and for eyes and just give it a very simple smile because it's so small and then right here the bottom two circles for the buttons and decoration and so then from there let's draw the whiskers so we come here and just pop out two whiskers and then one there and then right here on the back the stripes about one right here i always notice the pushing drawings always has one whisker that overlaps on one side and the other one just sticks from the side so i'm just gonna follow that i don't know why okay so from there let's um add some fun to this so i'm gonna come here and draw two little bottles of sprinkles so i'm gonna come here and just draw a little bottle it's the cap just to add some more color there's another bottom little cap and this one overlaps it and then you can just come in here and draw a straight line across to anchor or pushing cat like that and of course i wanted to draw some hearts so to fill up that empty space right here just to add some fun to this drawing and there and so then we got our cat in so for the side panel to decorate it i wanted to continue the same thing so i'm just going to draw some hearts just do whatever you like can't wait to see your mini gift bags and i hope this really inspires you to make them i had so much fun creating them for you so make sure to go to my website to download this whole template right here and to get the polar bear and the penguin so now i'm going to start to color it i'm just using your basic crayola markers nothing fancy and colored pencils so they're all done coloring i hope you like how it turned out and i'm leaving this back panel blank because this is where you would be able to write a message to the person that you're giving this to if you want it or you can even go in there and make another drawing whatever you like but for the demonstration i'm just going to leave it blank and i'm going to go ahead and cut this out with a scissor so they're all cut out and as you notice when i was coloring it i didn't care about going over the line because i knew i was going to cut that out and if you wanted to you could also have cut it out with an exacto knife if you wanted it to be exactly straight with a straight edge but i just felt it was much easier and i don't have to get a cutting mat too and i just use a scissors so now the next step is um what we're going to do is we're going to fold along these dotted lines that you see here to create our bag and one of the tricks i wanted to show you is what you can do is get a straight edge this gift bag is small enough where you can turn it over and just fold it along the line and it wouldn't be much of an issue but if you wanted a nice straight edge what you can do is put a ruler against where you're supposed to fold find any object that has a not too sharp of an edge this is just a plastic piece of tracing thing and i'm just going to use this i'm going to go against this line right here and i'm going to score it so basically i'm coming down here just pushing down so i'm just making a nice dent into this paper so that when i go to fold it it makes it nice and easy but of course you don't have to do this but anything will work really that has us a rounded edge so even like a pen that no longer works no no longer has ink you can use that or just find even paper clip on the edge of the paper clip so i'm just going to come here and just score on the lines where i need to fold so that's just a little trick you can use if you need if you want it to be nice and straight so i'm just going to have right here and so i did that one already so there so now says when i go to fold it it automatically gives me a crease right here because i've already scored it so i'm just going to come in here and keep folding along my lines so next one right here creating my panels and one more so as you can see i'm folding this way towards this direction right here so that this part is on the outside and so for the bottom part flip it over and you want to fold in so just fold nice and tight right there and then these tabs right here and one more so you want to flip it over and fold these tabs in so then now we have the shape everything is nice and folded and now we can create our gift bag so what i forgot to mention and i'm so sorry the most important thing you need is glue you can either use a glue stick or liquid glue whatever you have and so i'm going to go ahead and glue all my tabs so basically right here i'm going to flip it over and i'm just going to come along the edges right here and just give myself some glue on the tabs just on the tabs right there so this one right here don't be shy with the glue just give it a nice good amount because i'm using stock paper so it's a little bit harder it will not stick as easily so what you want to do is the first one if it's easier you want to come to this edge and fold down and push along right here so i hope you can see what i just did right there then the next edge is this one the front right here so as you can see it moved a little bit but that's okay it'll all come together so then this edge comes to there and just push it down so you got two edges now right there and then the last one so fold this in and fold this one in so that it goes nicely tucks in right there so notice right here and we've got this tab and then the last one so just make sure it lines up with the edge and ta-da you got yourself a nice little container pretty cool right so that's the gift bag portion of it and so if you wanted to give it this a handle you don't have to the optional part is to um right here i gave you these holes right here so if i'm going to use my hole puncher just to make life easier and i'm going to come in here and on both sides so if you don't have a hole puncher and try to go in there with a knife exacto knife and dig out the hole but that's only if you want a ribbon ribbon to go through it for the handle so here i've got a ribbon and the trick right here to make this handle is you want to tie a knot first so towards the edge right here just tie up a knot and notice when i cut the ribbon i cut it at an angle and the reason is because it makes it a lot easier for me to um to put it through the hole so notice this tip right here i'm going to put this tip through this hole right here i'm going to pull it out hopefully and so as i pull out notice that knot you made is going to stop ta-da right pretty cool and then now you have a handle so now for the other side you want to thread this sharp part right here into the hole once again and make sure it's nice and flat don't twist your ribbon so make sure it's nice and flat going at the right direction put it through the hole so it makes it easier if you cut your ribbon at an angle and just kind of gauge how long you want your handle to be so i'm going to pull a little bit more let's see i don't want it too long this is about right and so i'm going to what i'm going to do is because i have very little room in here to tie a knot because your fingers are kind of stuck in there so what i'm going to do i kind of know that's where i want it to be i'm going to pull right here where i want my handle to stop i'm going to pull it all the way making sure my hand stays there and this is where my knot will be so i'm going to come here and just tie a knot at that spot so oops my knot ran away so there got my knot in and i'm going to come in here and just snip this part off a little bit because it's a little bit too long and pull back so now the handles will stay so this is the one we created right here with the ribbon and so um to fill it what you could do is right here i got some tissue paper it's all up to you what you want to do you can fill it with some tissue paper right there and you could put lots of yummy goodies so these are santa kisses and you can fill it with chocolate whatever you want and many of you who have been following me i did a uh this one right here it's the um oh my gosh my mind has gone blank yes it was a gift card the gift card diy project that i did and so very fitting two pusheens and so you can make a gift card for someone just check out my video on how to make these and you could put them in here and they fit nice and perfect in a little gift bag right so there i wanted to also go ahead and show you the other ones that i made so this is the polar bear one um that i have for you on my website and this is the penguin one so as you notice with the polar bear one many of you loved my polar bear this was the hugs gift card from the heart that i made so you can put that in there with this and so this is made the same way it's also with a ribbon and this one right here is my penguin that i also have for you on my website and so on the sides right here i just drew some snowflakes and so with this handle if you don't have ribbon what you can do is just cut out a piece of the same paper that you're using for the bag and just color it and then glue it on the inside right there see how i glued it and so then that becomes a handle just as well as a ribbon and so this one here i put a nice big piece of chocolate and i also included one of my mini notebooks that i also have a video on on how to make them so i really hope you guys enjoy my mini gift bags and make sure to go to my website at drawstercute.com to download the templates and to get my penguin and my polar bear and the blank one where you can do whatever you like so there let me know in the comments below which one is your favorite and i hope you really love this project and if you do please give me a thumbs up and share it and make sure to subscribe so you won't miss any new draw secure videos see you later

Please explain how to bake nigerian fruit cake | easy & moist

to my channel and in today's video I'll share with you guys one recipe that is very dear to my heart is the Christmas cake recipe fruitcake recipe Christmas is around the corner so today I thought I should share with you guys one recipe I make all the time for my family every Christmas so watch to the end to find out how I made this video subscribe if you haven't already and I'll see you guys in my next video bye for this fruitcake you need on salted butter you need eggs all-purpose flour brown sugar Bailey's golden syrup black treacle vanilla flavor not Meg browning almond flavor you need baking powder you need some salt you need a digital scale to weigh everything out a hand-mixer a bull is sieve and of course it bacon time you will also need your fruits your missed fruit with the aid of the measuring scale you are going to measure out 250 grams of the brown sugar put that in a bowl measure out 500 grams of the all-purpose flour and then put it in another Bowl basically what I'm doing is weighing everything out I'm going to weigh everything weibo everything we are going to be using the butter the sugar the flour except for the for the fruits because I want to show you guys how I prepared the fruits so the butter was 500 grams next weigh out the eggs the reason why I break the eggs into a separate Bowl before adding it to this skill is because you know one bad egg can spoil everything like one bad I can really do more taste of your cake so it is easier to remedy the situation if you have a bad egg you know just straight out instead of adding it to the rest of the eggs except you're just going to throw everything out and start afresh so that is what I'm doing I'm going to weigh out 500 grams of my room temperature eggs once you're done waiting add one teaspoon of baking powder into the flour 1/2 teaspoon of salt and one teaspoon of ground nutmeg and then sieve everything together and set it aside so creamy butter and sugar until it turns peel it took me about 10 to 15 minutes with his hand mixer to get it light and fluffy but if you're eating a stand mixer honestly 5 7 minutes is fine remember to always scrape down the side so that everything will be even beat the eggs and then gradually start adding it into the butter and sugar mixture add them in batches add a bit of egg whisk add a bit of egg whisk until original story scrape down the sides continue mixing just like that on two you're done so next add 1tsp of your vanilla flavor one teaspoon of the almond flavor whisk everything together so you're also going to add one tablespoon of the golden zero one tablespoon of the black treacle one tablespoon of the browning and then whisk everything so to the bat I are going to add one tablespoon of the Bailey's don't be scared this thing does not intoxicate I'm not trying to turn you to dip cool it evaporates when you are baking with alcohol it evaporate while baking so don't be scared I tried it and it came out really nice so once you're done with that way out 500 grams of your missed fruit but before we go into that let me show you how I prepared this fruit for this I used dried raisins what I did was pour it into a bowl chopped up some cherries and then added it into the same Bowl and importing the alcohol I used the enj peach flavour alcohol and then soaked it for two weeks I left Italy you know in a cool place for two weeks and then every morning just shake it around so that the alcohol is evenly distributed to every part of the fruit so that was it so next sprinkle a bit of flour to the 500 grams of fruits you measured out a Lea and then pour it into the butter this is going to prevent the fruit from sticking to the bottom of the pan when baking so just mix that in a bit so finally to the butter add in the flour and then with the aid of a spatula just fold it in nicely if you use a hand mixer you might just over mix it and then the gluten in the flour with develop so the safest thing to do is just use a spatula and then just fold it in nicely line the bottom of the pan and then spray it with a cooking spray pour the batter into the pan and then just tap it off gently you know to get rid of every bubble in it and then bake on 325 degrees Fahrenheit for about an hour or just bake until a toothpick comes out clean you guys you don't even want to imagine this cake was delicious I hope you guys get to try out this recipe and this recipe can't pass for now enjoy on wedding cakes this is how they do their wedding cakes I hope you guys get to try it out so what I did next was to cut the top off and then just decorate it and put it on the table and yeah dessert is set for Christmas I hope you guys enjoyed this video please click the like button subscribe if you haven't already and welcome to my new subscribers thank you guys for stopping by my channel lots of love to you guys and I'll see you guys in my next video bye

Please explain how to paint wall quote stencils

Okay for this demo we're going to use the stencil Home Is Where The Heart Is. We are using folk art acrylics again they work great for this. We're going to do this project with a stencil brush. So we're going to be using first wrought iron folk art wrought iron and again we're going to concentrate a little bit on the load of the brush. So I'm going to come down I'm going to lightly dip my brush into just the edge of the paint. Just get it on the tip of the brush and then I'm going to this with a circular motion offload the paint. This way I have the tip of the brush evenly loaded it's not too much paint and you're ready to stencil. Okay when we stencil with a brush the idea is to stew a sweeping motion towards the opening of the stencil. You don't want to sweep the brush to the edge of the stencil you're going to force paint under the edge and get bleed. So you come in and then you just sweep in towards the center. Okay time to do the heart. We're going to use folk art Christmas red for the heart and we're going to be using a slightly larger brush this time we sell these brushes it's a slightly larger stencil brush and it's going to work great for this heart here so we're going to load the brush again just dip this the tip in the surface of the pain here then do a circular motion that evenly distributes the paint on the end of the bristles. Then we're going to take that and we're just going to slightly offload that on our paper towel so we're ready to go here. When you stencil this you want to make sure that you bring your your brush into the opening of the stencil and don't work this way and push the paint underneath. So you know you can start in the middle of the stencil no problem but when I do this I'm aiming it towards the opening of the stencil. You can see how this works works great. It's quick, it's easy I'm getting great coverage. It's known as the pouncing technique. You can see how the larger brush makes very quick work of this larger area. Okay home is where the heart is let's see how it turned out. That looks fantastic! Nice tight edges, turned out great. We're really happy with this. took about five minutes to do.

Please explain how to tell if women are lying to you in a text

while it isn't always easy to tell when someone is lying to your face spotting deceit in a text message can be far more difficult but now researchers have discovered that patterns in a text message that indicate a person isn't telling the truth a new analysis of hundreds of conversations as revealed women tend to use more words when they're lying along with self oriented words such as I email Liars on the other hand may be harder to pin down as they appear - like many of the linguistic cues likely because they use fewer words in messages to begin with in the study published two are same the researchers from Cornell University developed an adroit messaging app to collect sample text from a large number of participants over the course of seven days the team gathered a total of 1703 conversations they then removed the conversations that did not contain any lies leaving them with three hundred fifty one after separating the lying and truthful messages the team averaged word counts for each type of message as well as for gender and student status they also looked at the percentages of self words such as I I'm other words you and non-committal phrases probably possible sure etc pronouns are particularly interesting in deception because one actively chooses which pronouns he/she wants to use one communicating the author's explained in the paper self oriented pronouns show ownership and responsibility while other oriented pronouns can signal distance and lack of accountability the data revealed that text messages containing lies were overall longer than truthful texts on average de site full texts contain 8 words while truthful texts contain seven and the researchers also found this differed between the sexes while women use an average of eight words in a text message they tend to use nine when they're lying men however use about seven words in both truthful and de site full texts this study also revealed that Liars were more likely to use self-oriented words than they were to use you but when examined by gender the researchers again notice some key differences earlier we found out self-oriented words were used more in line however when we break the data down by gender women use South oriented words more across the board and other oriented words less while lying disproving our hypothesis the authors wrote men on the other hand uses significantly less but have an increased use of my and me both men and women though were found to use non-committal phrases more when they're lying which the researchers note is not surprising for men sure was most likely to appear while women tend to include the word try

Please explain how to make truffle s'more pops - with homemade marshmallow creme

Hi, I'm Ashlee Marie. And today, we're making Truffle S'more pops. Don't forget to subscribe so you don't miss anything. And down below in the comment box, leave me a comment. What is your favorite thing to make on a cookout over a fire? Now, ganache is super simple. It is two ingredients, cream and chocolate. That's it. And the ratio is two parts chocolate to one part cream. Bring the whipping cream up to a simmer and pour it over your chocolate. Let this sit for 5 minutes, then stir the ganache until the chocolate and cream are fully incorporated and it's nice and smooth. Stick it in the fridge and chill it until it's nice and firm. You want to take a small cookie scoop and just like you're scooping ice cream, you want to scoop this truffle material and pull it out. Take it between your hands and roll it into a nice ball. Now, I keep a rag close by so I can wipe my fingers off. And what you're going to do now is take a lollipop stick and stick down inside that truffle. Alright, now, this truffle is nice and gooey and ooey and warm from our hands. So now, what you want to do is dip it into some crushed graham cracker. Pick the big chunks up. And set it aside. We're going to stick it in the fridge and let it chill. To make this version of marshmallow crème, we're going to take the egg whites and put them in a mixer. Add some cream of tarter. Cream of tarter helps when you're beating egg whites. And then, finally, we have some sugar. Now, we're going to start beating these and once it gets white and fluffy and starts to get foamy and creamy, we're going to carefully add the granulated sugar a little bit at a time. And you want to keep beating that until it gets soft peaks. Now, we're going to make the syrup mixture. So, we have sugar and water. And you can make your own syrup with sugar and water, but I also like to use some light corn syrup. Now, I want to take the sugar just past soft ball stage, which is 240. Then, we want to take it to kind of a firm but not all the way to hard ball. So I'm going for 245. Now remember, that's a sea level measurement. So if you live at sea level, go all the way to 245. You'll be great. Now, I live way up in the mountains. So, I have to adjust the candy thermometer temperature to meet my altitude. So with as high up as I am, I knock off 20 degrees. Alright, our sugar is now up to the correct temperature. It's nice and thick and ready to add to our egg whites. We're going to turn the mixer on low and we're going to add the sugar in a slow stream which this beats. Once the sugar is all added, we're going to turn it up to high, add vanilla, and then whip it until it's the right texture. Alright. And there you have it. Homemade marshmallow crème. Now, take your chocolate ganache topped with graham crackers, and your homemade marshmallow crème or frosting and dip it in and swirl it to cover it, and swirl it as you pull it out. Then you want to take a torch and turn it on. Leave it on continuous. And then torch your pop. Getting all sides. And we're done. They look great. They smell great. I've always loved the smell of roasted marshmallows. In the description box down below, you'll find the recipes for the truffles, as well as the marshmallow crème. Time to give these a try. Toasted marshmallow, soft ganache- rich and soft, the marshmallow is still nice and melty and ooey and gooey, and just like a marshmallow should be. It's really rich with that truffle center. 43 00:03:58,223 --> 00:00:00,000 It's totally delicious and everybody is going to love these. Thanks for watching.

Please explain how to keep grubs off of lettuce : garden space

hi I'm Angela price from Eden condense small space garden design and this is garden space today I'm going to tell you how to get rid of grubs on lettuce now grubs refer to the larval form of a lot of insects and sometimes they're really tiny and sometimes they can grow to be an inch or two in length and if that's the case they're pretty easy to find if you find that your lettuce is being chewed up then the best thing to do is to actually just get into it and look around you'll find a lot of times that grubs will be located at the base of the leaf also you may have snails or slugs as well they will tend to hide there during the day when it's cooler to because it's cooler and darker down there and also more moist so the best way to prevent grubs I think is either to use an insecticidal soap and this has made for organic gardening or you can use neem oil which is also made for it for organic gardening and both of these products will when sprayed onto the leaves and you just spray on them and get them underneath can be used up into the time of harvest when you do harvest your lettuce you'll want to make sure that you wash it very well and get any residue off and these will prevent any insects from taking residents in your lettuce as well as because they're either oily or soapy it will be distasteful as well as slippery and not a good environment for those grubs to be on and then what you'll need to do though is that especially if when you're watering if water is getting onto the lettuce is to reapply this at least weekly because it will wash off especially the insecticidal soap will wash off more quickly than the oyel so but that'll give you some preventative measures to get rid of grubs if you have large grubs the other thing to do is hand pick them off like I do with slugs and snails and that way you know they're gone if you have any other questions about how to get rid of grubs on lettuce please contact me at WWE even condense calm thank you very much

Please explain how to make homemade rabbit toy bun fun box

hey guys this is Abbi and in this video I'm gonna show you how to make this fun fun box so for this products you have to be creative with what you make so let's get started see we'll be in will be a box make sure you take off all of the tapes and plastics labeling if there is any and a smaller square box is better for this project but if you don't you can also any small box okay you will also need some rabbit safe sticks such as Apple or willow I will be using Apple because storm loves Apple you also need some twine or rabbit safe string I also need some truth I will be using some dried apple and some pellet and so to get started take your box and poke a hole in the middle two of the sides across from each other then take a stick and stick it all the way through and you'll have to look in here and that's likely to get it the main purpose of this toy is you have to be creative so you don't have to do the exact same thing I will be doing so I will be picking poking holes in the other two sides this time a bigger stick so it will like this and now on the bottom of the box you have to come up with a way to close this so what I will be doing is taking some twine and cut I'm going to cut a piece and I'm gonna tie one end to this stick and then I'm gonna stretch it across and tie the other end to this stick then I'm just gonna cut off the excess Center and put it back around and now in here I'm going to add a couple pallet and also in here I'm going to take a lunch bag and rip it up so and then I'm gonna take a red piece and place now I did that in every four spots and I'm gonna put some more pellets right now in here I'm gonna break up some apples okay toss them in here and now I'm gonna seal this up somehow then I put those two flaps and then those two flat and I'm going to close it up the same the same way I did the other side so I'm gonna cut place tie it across this stick and then stretch it across and tie it around the other side then I'm gonna cut off the excess again now the rest is up to you you can stick some sticks wherever you would like to wait oh yeah you flip it over it sticks all over the place you could drop some pellets in there yeah that's how you make this fun box I will show some clips of storms playing with it at the end but anyway thanks for watching and I'll be seeing you and Mickey in the next video

Please explain how to make a walking stick video #2

ah back we're back once you have your sticks you brought them back now you want to fix them up do various things with them make it look nice make them as gifts for people or something like that we're going to cut the knobs off so we're going to use all when these Japanese type saws that are available at hardware stores and so on and we're going to cut all the knobs off of it and then we'll send them down with sandals knobs down and then possibly send some of the rough spots out of the so we like sandpaper block we use the medium and they're simplified easy to find we did point out the saw we use to cut in the field with just a hug a gardeners saw from like orchard suppliers sometimes like that and of course we always have them we're going to have a need to do some carving we may want to carve something on there carve it out put some leather on order two something like that what we do is sometimes we wrap leather around and we'll show you examples of that we might want to these laces all these leather pieces are available from leather stores and hardware stores or sometimes you can just buy a little scrap bond that's what those were sometimes we won't use all from from climbers supply places or whatever is just lace that looks real pretty to put on there and make a handle out of it or just make a deco and of course glues we're going to use glues we do often get into putting the leather on we'll use Brad's so we have all the different colors Brent you know brass and copper and silver color some people may want to do wood burning it's just a simple wood burning tool works great inlay is a little more complicated I've gotten into it a little bit lately but it's still fairly hard to do but you use glues like this and you can use to grab turquoise and different different levels of powder and granular and so on and then of course I also put out some sometimes we use walnut varnish and some your thing to finish it off with and I love these just these little paintbrushes they have now tips I like tips on mine I don't want them to feel soft when they hit the ground and and knives different carving knives which we get at the wood carvers place so this is the kind of things you can use don't have to have any of these things but it's good to have some of them and you have a lot of fun if you're going to make a gift for somebody you can kind of trim it up and I'll show you some intimate yes now we're going to get these branches and nuts off of here and using our Japanese saw and it's pretty simple and I didn't mention that all this with all of this wearing gloves is good you have to be careful not to get yourself cut obviously that's all I'll say about that I like taking these off and then sand in the malls nicely and carving them I used to shake bucket - or one of those woodworkers knives and finish up to the job and the idea here is - and I haven't I haven't completely peel this I'm going to show that in a minute but just to trim this on down I cut that one down smooth enough there's not much to do with it so you got it obviously trim off your knots and limbs and get that as smooth as you can and then we're going to finish taking this all and I just want to point out that if you have problems there's about three layers of this a lot of wood if you want to take them off carefully because you don't want to butcher that inside surface and I use it as far as cleaning these I use a blunt knife that I took and kind of cut down so it was a good tool I just made a tool that wouldn't cut through the wood but there was made a good raker and that's how I get these things cleaned down like this it takes some time but when you get done you really do have a nice process another way to do it is to soak this thing to take a towel wrap it soak the towel and let it lay for three or four hours and then come back to it and then this stuff will peel off much easier and much cleaner in the process so that's just part of cleaning it to do that any way you want to for that matter I like to finish off the knots so that they're smooth before I start sanding and I these are all I've trimmed them with the Japanese saw carpenters saw I'm just going to takes a while to do this so I'm just going to go through and trim them and I like to make those knots look good as nice as I can this one had a lot of knots on it for some reason that's reason I picked this tip to stick to show you now I'm going to turn the stick around the other way so that can trim the tops of each one of these but that's the way I do it this must stand - I've already trimmed the ends with my pocketknife or my carving that I used to use a pocketknife and then I graduated to a carving knife but then I'm going to sand pretty much Santa the stick itself at this point just to smooth it out so we'll have a nice smooth edge particularly up in here where you're going to put you have your hands on it and we're just going to use it then I put a hidden not I kind of go it extra hard on that and this wood is soft so it's real easy to work with it but it's also very stout so it's very nice as a stick and it's like so it works makes a really nice hiking stick and also pretty so now we're taking some of our darkness off our sticks so that's how we're going to take some of that Danish as lockups Lecco walnut and and just put back on here put some of color by skin okay so after we've sanded it the stick we're just going to wipe it with a damp cloth to kind of prepare it for um for a little stain and then we'll go over here to our staining area and our pavillion up in the woods and we'll now that's really going to be some nice-looking wood there you can see it's got a lot of different stripes and colors in it let's go try it okay we're just going to smear a little bit of walnut on here that I think it's a light walnut but it's just and then we're going to get all the most of the way down on the stick and then we'll wipe it off with a piece of old t-shirt and that's after we've wiped off the dust from the sanding but it's really as you can see now this has to be wiped off it can't be left on your cause it to be very sticky and it'll take forever to dry but it's going on pretty good out in this case this is a little Minwax o medium wallet I believe but it's right at the bottom of the cans so it doesn't have a lot of stain left in it you can see um we have it all wet stain we've got a layer of stain on there you want more you can always put another layer but now I'm just kind of wiping it off and first of all that's going to take that down and make it look absolutely like it's the original piece of wood which it is very close to what it looked like when we took the peel the skin off of it layers of bark but next thing to do is do some work on it maybe do some carving on it maybe inlay a piece of turquoise in one of the knots or carve a lead for a feather or some feathers or something like that and I'll show you some of the different things on some other sticks that we usually do you

Please explain how to make slime without glue and borax! no glue no borax slime recipes!

hi guys today's video is going to be on how to make sign without glue and blacks and I really hope that you find it helpful for the first method we're going to need a peel-off facemask and this doesn't need to be any specific brand a lot of people use the Freeman one which I'm using but it just has to contain the ingredient polyvinyl alcohol and for my activator I'm going to be using Carol's laundry starch and this is a powdered one so you do need to prepare it I like to use two heaped teaspoons of laundry starch and mix it in with a cup of hot water it's really important to go from the bottom up because they always find lumps at the bottom so you want it properly mixed in then we can start pouring our facemask now and as bad as I have achieved a facemask in my opinion because this took so long maybe about 10 minutes just to get the contents out of 6 packets so yes trying to achieve if you can then you want to pour about 3 teaspoons of the solution into the bowl and you want to start and the best thing about this method is as you can see here it starts pulling together really quickly because there's so much water in the mixture it makes this flow into so much bigger but somehow it doesn't make it jiggly it just makes it a big assignment amazing so I keep adding it really slowly and sewing it in when it gets a really sticky consistency I like to go ahead and add my gel food coloring it's important to use gel because this sticks in well with the mixture and then you want to keep adding it until it gets to this consistency and then you want to leave it for about half an hour and I recommend leaving it because I always find it with this method the slimes grow slightly harder after a bit of time and after you've left that you're left with this really nice stretchy slime those so so fun to play with the next recipe is from well it's loam and I absolutely love it because it's using stuff that you normally have around your house anyway first thing you're going to need is some normal plain flour and then you're also going to need a couple of jugs of water I want to pour about 3/4 of your bag of flour into a bowl and then pour your first jug over it as you can see here I colored it if you want to color it I do recommend having a few on hand because if you're making a big bowl like this the color does get lost in it you want to service them really really gently until all the water's absorbed and it starts to come and like a do then we can go ahead and add another jug of water and I recommend adding this really slowly because it's like me that is too much water to amount of flour you have it can go really gooey and gross then what you want to do is add it slowly and mix it in all the time what I did was pour a whole jug in and then I mix in my food coloring and it did kind of end up looking like black which isn't the worst thing in the wall but it isn't the best when you're trying to make slime if it gets to the stage like I have rich of business then you can go ahead and just add some more flour just to make it more doughy and then you can just play with it with your bare hands because it won't stain your hands once it's got more flour in it when it's ready it should be super thick and really fun to play with and kind of stretch you as well my favorite things about this method is first of all how easy it is to make but also how safe it is to play with and it kind of sounds like phloem as well I really hope that you enjoyed this video and if you did don't forget to give it a thumbs up I will to subscribe see you next week

Please explain how to make christmas ornaments at home using ticking material : ornament crafts

hi my name is dana church and i'm going to show you today how to make ornaments at home using ticking material some people might not be familiar with ticking material but it is a thick sort of duck cloth that people use to make bedding with so sometimes people have it laying around and what you can do is you can all really combine photographs with this too so basically what you do is you cut out a little piece of ticking and you take a photograph or a picture anything you want that you printed from the internet or even take a picture that you have and you scan it and you have to have it on this kind of paper that comes out of the copy machine you take a little product called gel medium you can get it at your craft stores it's sort of magic it causes a chemical reaction that i'm not really going to go into right now but it's like magic so first of all you take your piece of cloth and this is going to be sort of a country thing because i think this ticking material looks a little bit like a country christmas so we're going to also combine jar lids with it too like ball jar lids you take a little bit of the gel medium and you apply it on the canvas and it's going to soak it up you just really need to put it in the area where the photograph will go it's not very big so you don't need to cover it too far all right so you do that first get a good coat on it and make sure that it's smooth then you also coat the piece of paper too and this is when the chemical reaction sort of happens here the ink actually is absorbed into the gel medium and transfers onto the ticking material or canvas it's really a lot like canvas you can do your other photos like this too if you want then you put your photo down face down and you go from the middle out and you spread it out you make sure there's no air bubbles under there sometimes if you have a little roller or rolling pin you could actually roll over if you had a bigger photo but a lot of times i'll just make sure my finger will slip over the top and press out all the air bubbles get it as flat as you can so this is sort of cool if you had a photo even an old timey photo you wanted to transfer to this kind of material it looks cool when you're done so now you have this and you're going to leave it and let it dry overnight some people try to blow dry it but i really recommend that you just let it dry on its own overnight then when you're done i've already started this a little bit but you have this piece that has dried overnight then what you're going to do is take some wet paper towels and just squeeze them out a little bit so they're not too super saturated and you're going to press a little water in here and as you can see you might be able to see this but it's beginning to become translucent and that's what you want because what you're really doing is you're removing the back the paper and the ink is actually remaining on the canvas so it's sort of cool it's like magic all my students love this so after you get it fairly saturated and you can't you can see through it then what you're going to do is take your finger and start gently rubbing the paper and you'll see that the backing will start coming off so the backing starts to come off and you just keep rubbing over and over you can use some pressure just be careful you know pay attention to it make sure you're not rubbing like with sandpaper or something using your fingers should work really good some people use the toothbrush but i always just prefer using my finger and then you're going to keep working that and working that you know it might take you a little while then you might let it dry and you might see that it's still got a little bit of paper on it so you go back and do it some more until you finally come out with your picture i'm going to put that to the side but as you can see it's i'm going to keep working that but it's going to get better and better okay then when i'm done i take my jar lid and i just measure where i want it to go on here i cut it out then i take my lid here like i've done i've already done one here for you which is sort of cute you can add fabric behind it too you just take your picture you put it on here if you want you can put some fabric behind it like this you can layer it like this put the fabric you got to cut it a little bit better than i'm doing put what you transferred on top of here cut out push it through here like this and then you're going to trim the outer edges off the way you want them to be but before you do that actually you can either punch a hole in it or you can take some sort of country looking material and you can like put it through here like this go ahead and put it through there before you push it through so then you push it through line it up maybe you want to add just a wee bit of glue in there and you work with it a little bit and then you're going to have your ornament to hang on your tree and it sort of looks like this when you're done so there you go

Please explain how to fix a slipping transmission in your car (fluid change)

Rev up your engines! [MUSIC PLAYING] It's time for scottykilmer.com. If your car's automatic transmission is starting to shift radically and jerking, then stay tuned, because I'm gonna show you how to fix a transmission that's acting up. All right, as you can see by this automatic transmission control computer, modern vehicles have a lot of electronic computer controls. So the first thing you want to do is check the electronics of the transmission, because it's useless trying to fix mechanical parts if you have an electronic one. So check the electronics first. So start with a good scan tool, and plug it into the dash. In this Grand Am, it plugs in right under the right leg. And in this case, there's no codes or bad data. So there's no obvious electronic problem, so let's check the fluid next. And in this Pontiac, you leave the engine running, in park, on a level surface. Then check the level. Pull out the dip stick, and then, wipe the end off and check it. Put it back in and pull it out. In this case, it's up to the full mark, but it's kind of dirty. It's supposed to be red and it's black. So we're gonna change the filter and fluid and see if that helps. Now, when you change the filter and fluid in an American car, since they don't have drain bolts, it's a good idea to have one of these transmission drains to put the oil in so it doesn't make a mess. They only cost about $10. And here we are under the car. Here's the bolts that hold the transmission pan on. We've got to take them all off and then crack it to get the fluid out. Be prepared for a giant mess because the moronic engineers decide not to put drain bolt holes in them so you can drain it out first. Now, here's a good tip-- take off the end that's lower. Since you jacked the car up, it's lower on this side. Take those bolts off first, and then, it will start dripping on that side and it won't make such a mess. A lot of guys will just loosen that one side and then let it drip for 10 minutes so most of the fluid's out, and you won't make such a mess. That way the drain pan will catch most of the drippings, and you won't make much of a mess in the driveway. Then you just pull the pan out, and as you can see, there's a lot of black crud inside. Then go back under the transmission. On the GMs, the filter just pulls right off, and you replace that too. Now, here's a tip-- I always use fully synthetic automatic transmission fluid in cars that have problems because it works better under high heat. And in this case, I'm also using Lucas Transmission Fix because it works great on cars that have rough shifts. Now, before you put the pan back on, clean it with some carburetor cleaner to get the crud off. As you can see, there's a lot of black stuff coming off. Then, you just get the new filter and pop it in the transmission. It just fits in the hole that it came out of, and you lock it in. Then, the pan with the new gasket slips on, and you put all the bolts on. Now, here's a little trick to fill the transmission up. You already checked and knew it was full. So you measure how much came out, pour it in a container and put that same amount back in. Just pour it all in and then you know. In this case, seven quarts came out, so we put seven quarts back in. And in it goes. Now, I know we live in an instant gratification society, but it's best to drive the car about 250 miles to see how the cleaner and everything works before you dismiss it. Now, if after driving it, it works great, well, that's fantastic, but if not, then you're gonna have some serious internal transmission work done and that's expensive as can be. So the next time your transmission acts up, why not try fixing it yourself? And remember, if you've got any car questions, just visit scottykilmer.com, and I'll answer them as soon as I get back from this ride. [MUSIC PLAYING]

Please explain how to paint your brake calipers

the first step in properly painting your brake calipers is removing the CalPERS from the vehicle as you can see I've already done this in the first video of the series which is now in the link in the top left-hand corner of the screen the next step in this process is hitting the brakes with brake cleaner this is going to remove any dirt or grime that may be on the brakes now that the calipers are completely dry I then use the dremel tool to sand down the surface of the caliper because calipers are cast metal they have pits which trap debris and dirt my goal is to completely grind down those tips to a smooth surface finish grinding the metal down smooth will ultimately give you a cleaner smoother painted finish now that the calipers are cleaned at ground smooth it's time to start painting I'm using the g2 caliper paint kit I'll post a link for this kit in the description the paint kit is a two-part epoxy style paint so you will get the paint the hardener and a stick for stirring the kit also comes with a paint brush but based on other YouTube DIY videos the bristles fall out very easily so I picked up two paint brushes from my local hardware store and cut the bristles down to more control the first step in the painting process is combining the paint and the hardener in the paint can you will want to stir this for about 30 seconds and start a stopwatch let the mixture sit for about 5 minutes or painting when 5 minutes has expired you can start applying the paint note that you only have about an hour and a half before the paint will start to harden to the point where painting is no longer possible you also want to apply the paint and even but thick strokes you don't want the paint to fall up or drip but you want enough paint on the caliper so it will level itself out I accomplished this job with one coat with minimal drips be sure to avoid painting areas of the caliper that may come in contact with the brake pads or are part of a moving component after you have painted all the areas you want to paint let the calipers dry overnight then reinstall the calipers stay tuned part 3 will be coming soon in that video I install the painted caliper with upgraded pads rotors and brake lines thanks for watching if you have any questions or comments please write them in the comments section below please like and subscribe

Please explain how to clean & maintain a bbq - d.i.y. at bunnings warehouse

I'm gonna show you how to clean and maintain your barbecue and these are some of the tools we'll need with a large plastic bin got some barbecue wipes some scrubbing brushes some dishwashing liquid paper towels fat absorber some canola spray drip trays and some gloves for the hot water everyone loves a good Barbie and when you get a new one it's really important to make sure that you season they're hot plates you need to give them a really good wash and hot soapy water to wash off any of the chemicals and residue that may be on there from the shipping it's important that before you use your barbecue that you turn your burners on to medium and leave it for about half an hour with the lid down that will give it a good protective coating the other thing that you might need to do is put some fat absorber or maybe some Elementium foil in the bottom of the drip tray to make sure that it lasts longer and doesn't rust so that's how you season and prepare a new barbecue but now I'm going to show you how to clean one that's much-loved you can see it's been left outside on the weather and probably a good idea would be to give it a barbecue cover that would extend the longevity of this so this fat layer is probably a great protection against rust but it's pretty disgusting so let's get this clean make sure you kick all of your gas hoses to see if there's any cracking or deterioration and before working on a barbecue make sure that the gas has turned off when turning off your barbecue it's important to turn off the gas first that allows it to burn off any gas that's coming through the burners and after each use it's a good idea to disconnect the gas bottle from the barbecue first thing I'm going to do is get rid of the excess fat and then I'm going to wash the hot plate and hot soapy water that's the dish now I'm on to the grill when cleaning the grill make sure you look at both sides to make sure that any factor that has dripped underneath is cleaned off as well before I put the grills back in I'm gonna give the barbecue body a good wash I'm using hot soapy water again and a scouring pad now that we're given the barbecue a good clean we're going to make sure that the hot plates are dry you give them a bit of a sweat with some canola oil just to protect them don't forget to do both sides of the growth we've run the drip tray with some aluminium foil and now we're gonna put some fat absorber on it don't forget to change your fat absorber every team barbecues or so and BBQ wipes they're a great way to keep your BBQ clean in between big jobs like this that's how you clean and maintain a barbecue

Please explain how to make roasted frozen cauliflower - easy meal prep

hi friends I wanted to stop by today and give you a quick little I'm not even sure if you call it a recipe but a quick little tip to make the most delicious cooked cauliflower that I've ever had so all you need to do is line a baking sheet with foil preview your oven to 425 degrees so you get packages of frozen and cauliflower florets for me like this pan so the tool balances some olive oil some kosher salt and some black pepper so all you do is you just lay you don't thaw it or anything like that and then I'm gonna spread on some olive oil salt and pepper and I'll show you what it looks like before put it in the oven okay so this is what it looks like when it's all perfect for the oven it is covered in olive oil I think you can see some there this is two tablespoons worth of olive oil for three bags you can it's not a science I always used to heat when people would say that like it's not a science like do whatever you want but truly with this recipe you can adjust it so for this one I used two tablespoons for three bags and I do love that this can be more customizable if you are not on an elimination like we are well my husband is right now you could use other flavorings and things if you wanted to we only use salt and pepper and olive oil and actually I left it off of this third because my little girls been saying the pepper and things have been too spicy for her sometimes even when she's not eating anything with pepper on it but so I'm leaving the salt and pepper off over there so that she can hopefully have that but all I did was I poured the tablespoon over the cauliflower and then I stirred it with just the measuring spoon actually and then I just sprinkled it with salt and pepper and so now I am going to put it in my 425 degree oven for about I'm gonna check it about 20 to 25 minutes and see I really love it when it's like getting brown on the sides and when it's super soft to fork now if you like more crispy vegetables you can take it out earlier they're perfectly fine I like that as well I personally love my vegetables super soft so I'm gonna show you guys a picture when it's all done but let me get this in the oven this is what the cauliflower looks like you can see the steam coming off of it this was after 25 minutes at 425 you can see some of them are starting to get a little brown in there very pork tender these are really delicious if you like deep fried cauliflower this tastes like the insides of it so so good so this is a really easy way to make vegetables that you can store their great reheated so they store well all week thank you so much for watching if you'd like to see more videos like this please be sure to hit subscribe I'll be sharing more easy recipes as I come across them and if you liked this video please give it a thumbs up thank you so much for watching and I hope you have a blessed day but bye

Please explain how to put a hole in a starbucks lid to make a diy soap dispenser... by kelly barlow

everyone today's video is going to be the way I drill a hole in the top of the Starbucks lid so you can repurpose it and reuse it as a soap dispenser or a hand lotion dispenser and I decided that today I'm going to do it outside because it is a beautiful spring day and this kind of makes a mess anyway and I don't much like doing it in the house because when you do drill into these lids uh small slivers of metal kind of fly everywhere and I just hate having to vacuum them up because you know stuff like that always gets stuck in the carpet and you never get it all up and then one day you're walking past it and you step on it and you cut the bottom of your foot so I am doing it outside on this beautiful spring day because it seems like a good idea and have a change of scenery so things that you're going to need for this video first and foremost safety first so you're going to need your safety goggles I have um no slip grip gloves to hold the glass with you're going to need um I guess this is a wood nail you're going to need a wood nail you're going to need a hammer and you're going to need your trusty power tool whether it's cordless or not your choice and I don't know what these bits are called but my husband have these - drill bits in his toolbox and one day I was trying to figure out how I would put a hole in the lids of these containers these Starbucks containers and I went through this toolbox and I found these and they're obviously to make holes in something I don't know what but they work perfect for making holes and Starbucks lid containers and mason jar lids so that is what I now use them for don't know if my husband uses them but I sure do and what else are you going to need you're also going to need um a dispenser this is soft soap cheap dollar soap i buy these and use the soap out of it and the dispenser because when you go to Michael's or Joanne's you buy one of these spencer's for a mason jar and it costs $4.99 to buy one of them and why are you going to buy one when you probably have these dispensers all over your house and you just didn't think about it you got them in your shampoo you have them in your hand lotion you have them in your soap dispensers so from now I maybe think twice about throwing your dispensers away because you might they might come in handy for making homemade soap dispensers or lotions so with that being said I think that's everything that we need oh yeah we also need um some kind of a sanding bit if you have a sanding bit that works with your power drill perfect I don't have a sanding bit that works with this and I don't really want to go buy one because then it's not very Coptic cost-effective and I'm not saving money so I have a dremel and I'm going to use this sanding bit on it and if you have one or something else you use it but that's what we need so let me zoom on in we'll get started with this project and I'll see you back here in a second alrighty so I think we're set I think we have everything we need so let's get started doing this go ahead and take your nail and find the center of your lid and once you find the center go ahead and hammer a nail into the center of the lid and it'll go right through and look so now you've got the hole on the top so we are now done with the hammer and the nail so for this one I think that I am going to use the bigger bit because you need the hole in your jar to be big enough to fit over the neck of your soap container your shampoo container whatever you need it to fit over the neck of this so we are going to need the bigger one to make this hole so I am going to put on my safety goggles I'm going to put on my grip gloves because if that glass breaks I don't want it to cut my hand and we are going to start off by just sticking the tip right in the hole that we just made with our nail and forgive me for the noise and we are just going to drill away and every once in a while check to see if the hole is big enough to fit over the neck of the bottle he show you where we're at so far that's what it looks like so far so just keep going a little bit more and voila I think that once we smooth out the edges this is going to fit just fine so let me show you how we go ahead and do that it's going to be loud and sometimes a few sparks fly um just wear your safety goggles and I suggest wearing the gloves because the metal does get hot and you want to protect your hands and so let's go ahead and get started on smoothing out all the edges here just gonna come off you okay I think we're done I think it's nice and smooth let's see if it fits and voila there you go and it fits nicely over the neck of your soap dispenser I will show you part two in this video on how to reuse and repurpose your empty soap and lotion containers with their dispensers in an upcoming video so I hope that this video helped you I hope you liked it I hope you can benefit from it like my video if it helped you subscribe to my channel please and I will send you more videos to come with more DIY crafting on a budget recycle reuse repurpose all of the above see you next time

Please explain how to make a paper helicopter - simple and easy

in this video I'll show you how to make a paper helicopter like I used to make as a child first grab a sheet of notebook paper if you don't have some notebook paper any eight-and-a-half by eleven sheet of paper should work now fold the paper in half trying to keep it as even as possible along the fold here the paper in half now fold the paper again and tear it again and now repeat that process one more time you should be left with a piece of paper just over five inches long and about two inches wide with a pen or pencil draw a line across the center of the paper then draw a second line just below the first from the first line draw a line from the center to the top of the paper on the second line you will need to divide it into three sections now that it's time for cutting and so there is no confusion it is a good idea to add a small circle to the cutting areas as shown after you have cut the lines it is time for folding on the shorter section fold the flaps over the center piece to create the base of the helicopter now fold up a small section from the bottom and place a small paper clip to hold it in place and to add a little weight on the top section fold one piece down as straight as possible and then repeat this process with the second piece folded in the opposite direction these are now the propellers gently lift both of the propellers until they come to rest at about 90 degrees from the base it is now time to file your helicopter have fun if you like this video please click the like button or comment below for more videos like this visit us at specific love comm

Please explain how to make bbq red cabbage, carrot, kohlrabi, brown butter

ah my name is Richard Bainbridge and I'm chef/owner of Benedict's in norwich today I'm going to do a version of cultural for me this dish is all about the projects you know there's no meat to kind of steal away from the show I just taken great projects that comes all from furniture which is amazing from the red cabbage to the parsley to the carrot to the corralling all comes from this amazing farm the story that goes behind the farm of it kind of Lee in a place where people can find refuge and kind of give families a break from their children who have got mental disabilities it gives them a sense of worth producing this amazing produce which then is organic and biodynamic which just makes it even better for me they come into the restaurant they'll deliver the produce and you see their faces and how proud as they are of this amazing product that for me I want to do them proud as much as the vegetables we take the red cabbage we cut it into quarters we pop it into a sous-vide bag with some lard and we cook at 88 degrees for three hours it's just soft to touch but still got some body to it then we'll just take that and we'll barbecue that on an indoor barbecue to get a nice kind of scorching hot summer barbecue flavor into it then we have a corroboree salad where we take the kuraby peel it down and we'll just put it for a Japanese slicing machine which you get this beautiful spaghetti that comes out the other side and all we do a little bit of lime juice some fresh raw savoy cabbage julienne and some onion seeds I'm just going to mix through at the last minute and then we're just going to make a quick carrot gel which is made from carrot juice and we take a hundred mils of the juice and we take 1% of agar to that and we just put the agar into the juice bring it up to the boil and when it's set hard we blend and just pop down to a piping bag pipe that around the plate and we've also got some parsley water gels which is done in exactly the same way that you just lend parsley 100 grams of parsley with 100 grams of the water and we blend that you pass it for a sieve to get this beautiful bright green liquid and again it's 1% over and that's and that goes on the plane so just to serve with it we're going to serve a warm brown butter Savion which is something that I like to take on the board called mayonnaise I wanted something a bit more richer and a bit more depth to it so what we do is we take 240 grams of white wine we reduce that by 3/4 and let cool to room temperature then we have some beurre noisette which is just butter which is being just colored to a nut brown color and let to cool that's 150 grams and then we take 50 grams of fresh salted butter and just melt it combine the two together and then we add our warm and just warmed white one gonna get to that and then what we do is we take one egg and three egg yolks and pop that into a blender and 6 grams of salt and 30 grams of lemon juice we start to blend that into a blender then we have our brown butter mixture which has got the white wine in and we slowly start to incorporate that into our eggs so essentially we are making a brown butter mayonnaise in many ways but what we'll do once that's all incorporated in and it's all emulsified together we just put into a gas siphon charge it twice and with co2 keep it warm around 60 degrees so how we traditionally serve it in the restaurant is we serve the plate to the table and then those the waiters will come along with the gas gun and just put in the brown butter Savion at the table and like I say you bring it all together and it tastes amazing it just tastes like political to me you you

Please explain how to fit a rug to a horse

hi i'm abby from the talon school of equitation and i'm gonna show you how to fit a rug okay so we have a nice color rug here no this horse I know it's fine to fit a rug too but you really shouldn't take any chances especially with a young horse so the best way to do it it's what you'd want to do you've got your rug like this you want to turn up the other way so it's inside all right essentially and half it so as you can see the rug itself is in half this being the rear and this is the front I'm going to take it from here so I have my front section which there is just gonna sit on her withers at the front okay it's gonna walk up to her gently I don't know I'm here very gently now put that over the top of the withers all the way over no you want it ideally a little bit far forward first now we're gonna do the front straps these are just normal surcingles now you can just gently slide it back a little bit now we're going to take the back of the rug and just gently slide it right over her quarters this one has a little tail strap so stand to the side gently keep her tail pull it out over the top come back again here get our singles cross them over so you've got back to the front and then this one front to the back now you can see that's actually quite a nice fit these are sitting nicely to her tummy not too tight but not anything that she's going to be able to skip right off if you look at the front you can put your hand then you've got quite a nice bit of room here and you can put your hand in there these are nicely crossed over so there's going to be new rubbing on her chest and then if you go to the back of her it's just covering her bum perfectly nothing sticking out or there's not miles about coming right behind her then when we want to take it off I'm going to undo these ones first again very gently let them go then go back to the front and do the front ones nice you go back to the front to get over the back again gently take your tea light hold it back over the front of em and slide it off

Please explain how to heat your home efficiently

hi welcome to this video on tips for keeping your house warm during winters on this channel synergy files fee aim to inspire budding engineers and technicians for a better more sustainable world so please do subscribe to our Channel as winter sets in heating up homes and keeping them warm can be a challenge winter hits people hard particularly those who are in energy poverty or people who spend around 10 percent of their income or more on heating in this video we will try to uncover simple measures through which one can keep their homes warm coming up in this video we will look at number one understanding of heat loss from homes number two controlling that heat loss and number three generating heat cheaply there are plenty of tips and useful information in this video so please watch it till the end it is very important to understand the mechanics of heat loss from your dwelling 4 if we learn it we will be able to identify and target the most critical areas to resolve first for any house the external walls are the portal for heat to disappear into the ambient windows to play a major role in increasing heat loss the picture on screen indicates that generally 1/3 of the heat loss occurs through walls windows 2 can account for 10 percent of the heat loss wild roofs with a relatively smaller area compared to the outer walls account for 25% of the total around 15% occurs through the floor and almost the same amount of heat loss occurs through drafts the strategy should always be to cut down on those losses before we look towards measures of generating heat a poorly insulated house is like a bucket with holes turning the heater on in such house is like trying to fill that bucket logically the holes must be plugged before any effort to fill the bucket in a modern building take multi layered walls prevent the heat from escaping easily heat has a tendency to rise a significant portion of the heat is lost through the roof in a multi-story building having a flat on the middle floor has its own advantages it receives heat from the bottom floor flat while the flat on the top acts as an insulation if your house is an old bill then chances are that the external walls will be built with two layers of bricks with cavity between them a convection loop can build up in this cavity which encourages heat loss a convection loop is a current of air that picks up heat from one surface and deposits it on the other there are various spaces in which a convection loop or a convection current can develop for example it can develop in between the windowpanes of a double glazed window and that is why these windows are vacuum sealed or filled with an inert gas it can also develop between roof slates and the Attic note that convection has the ability to be several folds stronger medium for heat loss than just conduction it is paramount to minimize the strength of these convective currents it should be understood that static air is good insulator of heat on the other hand moving air that represents convection can increase the heat loss by several folds any obstacle in the part of moving air serves to restrict the convective heat loss if we look at first on the animals in the polar region they serve the purpose of obstacles they tend to restrict the movement of hair near the skin and thus prevent the onset of convection cavity wall insulation can reduce the heat loss from the external walls significantly cavity wall insulation is essentially a foam like material that is sprayed and it's solid if ice quickly it fills up the space between the bricks this restricts the movement of air and thus prevents convection currents even cheaper than cavity wall insulation is loft insulation it has been researched that 270 millimeter layer of loft insulation can drastically cut down the heat loss from the roof Lane loft insulation is the cheapest and most effective measure in making a home energy efficient and often grants are available from the local government to assist you with the cost to cut out the heat loss from the floor rugs are a simple effective solution carpeted homes tend to retain more heat than bare or tiled floors if carpeting isn't an option because of the costs then covering the floor with drugs or thick cloth can be looked at windows particularly a single place can be problematic they can lose heat both through conduction from the glass and drafts from the openings in the frame double glazed windows can break the heat loss levels down to almost the same levels as external walls whereas triple days windows can be more thermally insulated than walls the heat loss properties of a window are characterized by you value a low you value is favorable just for comparison the you value of single-phase window is around four to five watt per meter square per kelvin the you value of a double glazed window is 2.5 to 1.5 watt per meter square per Kelvin while the you value of a triple glazed window can be as low as zero point seven nine watt per meter square per Kelvin meaning a triple glazed window can prevent five times less heat loss compared to a single glazed window if the cost of changing windows is prohibitive then a layer of cardboard or bubble wrap can be placed over the single glazed window during long winter nights if you do that make sure to wipe off the condensation on the inner windowpane from time to time just to prevent moisture damage to the window frame the next important factor that needs to be looked at is draft as mentioned earlier drafts can make up 15% of the heat loss from an average house fortunately there is a simple solution to tackle them one can use draft protectors to prevent the air from seeping through the openings that lead directly outdoors these openings are not only spaces around the door and window frames but also the latter flaps and keyholes for draft roofing the window and the door frames self-adhesive form strips are very simple cheap and effective solution they are attached to the surface where the window or door flushes onto when closed building stand have improved considerably over time in fact some modern homes are so thermally efficient that they can get heated by body heat alone it is worth noting that humans constantly release heat because of metabolism the amount of heat that they generate can vary from 40 watts to 200 watts depending upon the activity level the principle on which new homes are built is that they breathe in less air and ventilate less air out on the other hand all homes need to breathe in more air and at the same time exhale more air out in light of this modern solutions of making homes thermally efficient by cutting out all the air from the inlets in an old house can be counterproductive it can result in buildup of moisture as an old house needs to ventilate more air to lower the amount of moisture it has in such cases and air to air heat exchanger can be used viii where heat exchanger is advantageous because it allows fresh air to come in and at the same time it makes the cold incoming air exchange heat with the warm outgoing air this keeps the heat loss to a minimum it where heat exchangers can be purchased from the market or they can be built cheaply at home if again the use of a to air heat exchanger is prohibitive than to get rid of the moisture problem one can use a dehumidifier the dehumidifier will use electricity but once the air is dry it requires less heat to get it up to a comfortable temperature sources that add moisture to the air indoors should be removed avoid drying clothes indoors and remove any open vessels that contain water moisture removal is not only beneficial for making heating more effective but also for cooling air during summertime there is also a passive measure for moisture removal this involves the use of desiccants materials like silica gel are desiccants they absorb moisture from the air around them many desiccant materials can be reused for example one can heat up the soaked silica gel granules to release the moisture locked into them this makes them dry and reusable for trapping moisture silica gel granules can be purchased very cheaply there is also desiccant wheel available from the market that performs the same function once measures for heat conservation are in place one can look into effective heat generation solar water heaters and solar air heaters are a very low cost measure that can save you loads on your energy bill if you are someone who enjoys a bit of DIY then these units can be built easily at home a video on making a cheap solar air heater is presented on this channel the link can be found in the description solar water heaters have proven to reduce the heating bills by nearly 50% in northern latitude countries the energy required for heating can make up more than half of the total energy use there are a variety of solar water heaters available in the market from vacuum tube collectors to flat plate heaters they cost half spiral down and one can get them extremely cheaply we should allow more Sun inside during the day time if it is a sunny day curtains drapes or blinds can help in preventing large convection loop to develop during the night in Scandinavia trim walls are designed to soak up the Sun during the day and release the energy through the night it is a great way of passively heating indoor spaces details on trombe wall are available in another video on this channel lastly just to reiterate energy conservation should be the first priority investment therefore should be made on insulation first rather than on solar water heaters thank you for watching this video if you learned from this video do give it a thumbs up if you would like to share your ideas or give any suggestions or ask any questions that you might have post them in the comment section thank you for your attention

Please explain how to replace the water inlet valve on a hotpoint washing machine

Hi, I’m Rory from eSpares and in this video, I’m going to show you how to replace the inlet valve in this Hotpoint washing machine. Now, here we are round the back of the washing machine. Water gets into the machine by coming through the inlet hose, through the inlet valve and into the machine. The inlet valve’s job is to control how much water goes into the machine and when it goes in during a cycle. Now there are two types of inlet valve, the hot water valve and the cold water valve. However, on most modern washing machines, only the cold water valve will be plumbed in. So how will you know when your inlet valve is broken? It’s most likely to happen during cold weather. Cold water inside the valve can freeze and expand and therefore crack the valve and cause leakage. So if you’re noticing that there’s a leak coming from your washing machine either at the back or underneath, and it’s definitely not coming from the door seal, then the chances are you’ll need to replace the inlet valve- especially during cold weather. So here we have a selection of different inlet valves, they come in all different shapes and sizes; from the simple, like this one-way hot water inlet valve to the more complex, like this four-way cold water inlet valve which sends water into four different directions inside the washing machine and has four valves on it too. Now, it doesn’t matter how simple or complex the inlet valve is on your washing machine, they’ll all be fitted in much the same way. What you will need to make sure of though, is that you get the right inlet valve for your washing machine. To do this, you’ll need the model number. This can be found either round the front on the inside of the door or like this model, on a label on the back here. So now what I’m going to do, is fit this three-way cold water inlet valve inside this Hotpoint WD 440p washer dryer. Safety first, make sure your washing machine is unplugged at the wall before you get to work and you’ll need to move it into a big open space like I’ve done so you’ve got easy access to the back of the machine. Now, I’m just going to remove the top panel, so I’ll need to remove the two screws at the back here. Now we can just about see the cold water inlet valve situated below the dispenser draw top here, it’s held in place by three screws; two in the dispenser draw top and one at the back of the machine, which I’m now going to remove. So now we have a slight problem, one of the screws holding the dispenser draw top to the inlet valve is positioned underneath the chassy of the washing machine, so we need to move the whole dispenser draw assembly forward a couple of inches so we have access to it. First thing I need to do is remove the draw, and now I’m going to need to remove the fascia as well which is held in place by a couple of screws. Now I just need to remove the fascia by unclipping these two clips, and then I can put the whole thing on top of the machine. We can now move the whole dispenser assembly and inlet valve forward a couple of inches so we now have access to the two screws here. They are Torx head screws, you can buy a Torx set at the eSpares website, I’m just going to use a Torx bit on the end of a driver. Lastly, I’m just going to snip the cable tie off. Finally, I can remove the pressure sensor, and now I can separate the inlet valve and dispenser assembly just like that. I can now remove the whole dispenser assembly over to one side, just being careful not to damage the tub inlet hose, and now I’ve got space to work on the valve. Before you remove the old one, just make sure to take the seals off it because they don’t come with the new valve. Now, I’ll need to remove this hose by taking that clip off, and then pulling the hose off just like that. Now I just need to remove these connections but before I do, I’m going to take a photo so that I know how I’m going to put them back into my new valve. Now we can get rid of our old valve, and here is our new one. Basically to fit it, all you need to do is repeat every single step you’ve just taken to remove the old one, but in reverse. Starting with putting the connections into the new valve. Don’t forget your seals of course. And that’s how you fit a cold water inlet valve to a Hotpoint washer dryer. It’s a bit of a fiddly task but it is doable and is certainly better than getting an engineer out. On a lot of models, it’ll be a lot simpler to change the inlet valve than on this one, because the dispenser draw won’t be in the way. Inlet valves for all makes and models of washing machine are available on the eSpares website. Thanks for watching.

Please explain how to: make a t-shirt tank dress

hey fashionistas today on make your mark we're going to be making a Chanel inspired dress from just two tank tops and a little bit of ribbon now I know a lot of you are just getting started sewing so we're going to be making this project on a new machine from singer called the vivo the vivo is specifically for non sours crafters and for people who are just getting started sewing so stay tuned until the end of this video because I'm going to be giving one lucky winner of vivo sewing machine okay you ready to get started here's what you'll need me you Oh you you you okay fashionistas if you want to win a vivo machine of your very own here's what you'll have to do subscribe to my youtube channel leave me a comment and tell me about the first thing you're going to make if you win the vivo machine head over to the singer Facebook page and like them and tell them mark Montano sent you good luck and I'll see you next Saturday morning bye

Please explain how to make a decorative rustic bow

For this bow, I'm going to take my Bowdabra, take my Bowdabra Bow Wire, fold it in half and lay that down into the Bowdabra, and I'm just going to tuck it underneath so it stays out of my way. Now I have this really lightweight burlap, and I thought this would be really pretty for home decor, and you could put it - you could glue it onto a pillow. There's a lot of different things you can do. So that's kind of why I just wanted to make this really fun fall decor bow using this burlap. And I really loved the color. And I'm just folding my bow back and forth, and let me just keep folding. I think this is going to end up having three loops on each side. And I'll just stop it there. Then I'm going to take - this is a little bit thicker and this is a wired burlap. So I'm just going to fold this back in here. And I really love this bow. It makes - it will make a beautiful bow for a fall housewarming gift, but I think it would be really pretty as some type of a home decor accent. I'm just going to lay these little flowers that I actually cut off of a bigger arrangement I had. Lay these down in here and take my Bowdabra wand, scrunch everything down, and I'll take my wire, bring it through my slipknot. Hold the whole bow down, pull it really, really tight, separate the ends, bring it around to the back and tie it off. This would also be really pretty on a fall swag or a wreath that you put in your home. So this is a great bow because it just has so many different uses, and it's just elegant and rustic. Subscribe to our YouTube channel so that you can see our new videos when they come out, and don't forget to like us on Facebook.

Please explain how to make pickled cucumbers - christina tsiripidou

hello welcome to the Christina to be the show I'm Christina your host I'm an integrated nutrition health coach and I need you to help you achieve your health goals and empower you with knowledge so you can conquer and serve the world doing what you love I'm really excited about this episode because it's really close to my heart you may be thinking that I over exaggerate but I really don't that is because I was raised on from home ain't fermented vegetables my mom would make every year a bunch of them we would consume it throughout the year delicious it was amazing no my mom didn't know at the time she was actually setting my family's health on track and also for us to have a long and happy life so what is fermentation fermentation according to sunder Katz is unintentional or desirable transformative action of microorganisms humans have been fermented vegetables for thousands of years and they did well because it keeps us healthy the bacteria produced from fermented vegetables help us absorb nutrients that otherwise we wouldn't helps us create nutrients for a better function of our body it also helps in the reproduction process aiding digestion and also supporting union function and there you have it pickled cucumbers thank you so much for watching if you like this video please give a thumbs up comment on the section below to let me know your thoughts share it with your friends and do subscribe because I plot new content every week see you in the next video

Please explain how to make super-cute owl cupcakes | cupcake jemma

hello it's me and I'm back in the kitchen at crumbs and really Soho and I am going to show you how to make something cute to top your cupcakes with I really like owl emmelda pretty cute I know make our toppers to earn your cupcakes let's go I'm making my little owls out of sugar paste but I've put in a bit of gum tragacanth which is a powder which makes your sugar paste into modeling paste which means it'll drive it firmer and you can get up in any good cake decorating shop and I've got loads of different colors because I want to make lots of different combos for my owl and I'm going to start by making a green body so I have my green sugar paste here I'm just gonna need it for a little bit just to make sure it's a little pliable and there's no like dried old crispy Denson so I'm using a nonstick board and a nonstick rolling pin but if you don't have those and then you can just get the flattest surface you possibly can and dust a tiny bit of cornflour oh but that will help stop it sticking and I'm gonna roll this out until it's about 2 or 3 millimeters thick and nice and even so to make a little bits of my owl I'm just using circle cutters I have one of those really cool nesting circle cutters here and I've got 4 different I've got really big one medium one and then 2 fairly small ones I'm going to use the medium one for the body so just chomp out a circle and then using one of the smaller circles I'm going to take a piece out of the top to form little our ears so pop that body onto some greaseproof paper so that it doesn't stick anywhere and then we're going to get on with making the little tongue Tom and the little wings so I am going to do a blue tummy robot my blue sugar paste here and we're going to use the same color that we use for the book the main body to create the tummy they roll it out again to slightly thinner this time more like one to two millimeters thick once that's nice and thin Chomp another circle out and then using the bigger cutter about halfway down Chomp right throughs that makes a kind of crescent moon shape and then using a bit of water and a soft paintbrush just paint the underside of that really not too much with water you don't it to sort of leak everywhere just enough to moisten it and then stick that to the bottom of your owl body and it should fit next I'm going to make the win so I'm going to make them out of purple sugar paste I've got a small amount here I'm just going to roll that to the similar thickness as you just did with the tummy at the wings I'm going to use this guy again I'm going to chomp out a circle and then using medium small one chop out a little bit from the side on one side and a little bit from the side on the other side wings and next I want to make some feathery patterns or pretty patterns on his tummy and I'm going to use this because it's kind of interesting and it looks a little bit feathery when you stick it on you can use anything you want you can stab it with a toothpick or you can you can get little pressing pattern presses as well that you can use but I'm just gonna use this is what I have again using a bit of water on a paintbrush just paint the backs of your wings and stick them on to your little owl either side and I'm going to give it a bit of extra detail on the wings and I'm going to use just a regular piping nozzle to make little holes to look like a little easy and now you need this big eyes or I'll have massive I signed got some white sugar paste just need a very small amount I'm going to roll two balls the same size that size of a pea and then using my fingers I'm gonna squash them flat straight onto the board and then using bit of water stick them on in the place where I go next using a tiny amount of orange sugar paste we're talking know what that's gonna be like a pumpkin seed a really small amount roll it into a ball and then picture the end to make a little triangle stick that on where the peak goes in between the eyes so morels coming along nicely but here's the line of the bat so I'm going to give them some pupils and I'm going to use black food coloring and a tiny bit of water so just grab a toothpick and get a little little blob and put it on kind of palette and then once you've got a knife inky black just use your paintbrush to make little eyeballs so then you just need to leave them to firm up a little bit and then pop them on a cupcake when you're ready you can keep them for a couple of weeks but actually they keep quite well I'm going to eyes mine now right my cupcakes are ice and now all the remains is do you put my little owls on top so there he is cute little owl perfect for parties perfect for kids perfect for you and all your mates and mix up the colors make them bright make them pass still do whatever you like but make them shoot if you like this video and you want to see more videos by me every week don't forget to subscribe to my channel by clicking on the link up there I'll be back next week with another recipe for you guys so I'll see you then bye

Please explain how to: sliding necklace knot / adjustable knife lanyard - preparedmind101

everybody's Christmas prepared my 101 I thought I'd do something a little bit different and give you something that you can use instead just showing you the latest greatest toy now I recently taught myself how to do a sliding necklace knot and I've been finding all sorts of uses for that with my gear for instance I made some trades here recently and I just picked myself up a new tops Tex Creek XL and I wanted to put a lanyard on it and I'd been putting just a straight piece of cord on my knives and using a cord lock to slide it up and down well I realized I could use this same not on the lanyard and it looks like it's just you know a little tied off in but actually put this on here and I just pull it down that tightens it to exactly where I want it to be on the knife and then I can just slide it down a little bit and have it down on the bottom of my hand so it's a very very loosen it up so very very useful not to learn and it's not that hard at off I can teach myself it hopefully I can teach you a lot of you probably already know it but this is for the people that don't I've used it on a lot of my neck lanyards like for my my vaporizer and all that kind of stuff it's just it's handy so I got a couple things I need to put it on so let me move the camera around and I'll show you how I do it okay first I want to show you how I use it most often which is an adjustable neck cord now some people will get upset with this because I have a certain percentage of people that see me with paracord lanyards and think I should put emergency snaps on it in case a ninja jumps out of the bushes and tries to strangle me with it but you know hey life is risk I can put this on and just pull and cinch it up to the exact length that I want it on my neck and then when I want to take it off I can just pull it open it up no problem so how do we do this okay I'm going to make like just a little accessory lanyard got this little hook on here a nice long piece of paracord what we want to do is lay it down like so and just kind of loop it around so they're overlapping and get it right about where you think the normal length of your lanyard is going to be so then what we're going to do is we're going to take this end or flip it around and then we're going to pick the pick these up pick these three strands up like so now we're going to start take the top one we're going to start wrapping it around and we want to wrap it toward this loop so I'm just going to go one two and try and get try and keep it as tight as possible three and I'll do three or four generally I think this is about as much as we can go so then we've got our three loops we've got our tag and put that through the loop and then pull it so that's nice nice and tight right there now that now you've got one of your sliders finished try and get it as tight as possible and then I'm going to end up just cutting that off right there and melting it down with my little torch lighter now we're going to do the second one take that flip it over pick this up and again we're going to we want to wrap toward this end of the loop so we go one a little bit hard to do it and keep it in the camera frame i'ma try to three sometimes you can just kind of pause and make sure they're nice and snug the third rap how many did I have on this one three and then through the loop so now we're going to finish it and then we're going to slide that and lock it nice and tight so now we've got both sides we can loosen it up so we can put it around our neck and then once it's around our neck you just reach back grab these two tighten it to the length that you want and if I want to make sure if I got enough there I want to make sure that I keep this straight at all times a lot of times what I'll do just grab that get down to the end here now I know I'm nice and even I'll just put a little overhand knot right there try and keep it as square as possible so now I know my little accessory cord no matter which way it's always nice and straight so let's finish this up real quick I guess my lighter ran out of fluid just want to melt my tag ends this is going to be a it's going to look a lot better if you're using black cord little too breezy out here get that when I get inside so there we go let's see what how it looks so here is our finished accessory cord so we can rip freash around tighten it to the length we want and clip on whatever it is here I'll just use my little ecig thing there we go I want to tighten it up higher pull it apart I want to lower it there you go nice and easy very very simple very very useful now how would we use this for making a knife lanyard one little extra thing I'd like to point out in my opinion the best thing to use if you're making some sort of a adjustable accessory lanyard is I like the Atwood four strand paracord it's about half the thickness of regular paracord so it's much seems a lot more reasonable hanging around your neck it's not so bulky and it's still pretty strong I think it's around 250 pounds test strength so that's generally what I use I've got one on my sink benedict metal and I've got one for my e-cig so I use these on all sorts of things but let's get back to the knife lanyard just as an example when I was messing around with this I threw one on my five and a half inch Tonto cold steel Voyager so it works rather well grab on there find that tag end pull it all I got pulled this way rotate it down that way you can get maybe you want to hold it in the rear position I can tighten down that Lane or even more and it's still nice and tight in my hand so that's why I like this particular lanyards but we're going to put this on a fixed blade okay so I got my tops to home a field knife here you want to put one of these lanyards on it so I'm just going to slide the knife down since you saw what it was I'm just going to go ahead sheath the knife for right now now we're just going to do a single slider on this so I'm just going to kind of find about the point that I want it going to loop it over so this is what we got top one is looped over bottom one is straight going to take our tag end take it over and start looping it around going toward the loop so there's one there's two pull that little tighter three generally like to go for round make sure it's nice and tight and then we're going to take it through the loop we're going to try to take it through the loop there we go so now we're through the loop we're going to just go ahead and tighten that down pull it through a little more tighten it down pull it through there we go now what we want to do at this point we've still got all this length right here so we want to determine where our hand is going to sit in the highest position that we might want to cinch this up so we're going to go up to the choil go ahead and tighten that up so we know right about there that's about as far as as long as we're going to want it so I'm going to take our hand out loosen it up just a little bit now we're just going to do a simple overhand knot get that down there close right about there try to get this as square as possible tighten it up and then I'm going to do a second one that way when it is all the way cinched opened up the slider is going to be up against this one we're still going to have another knot to grab ahold of with our finger to loosen it up get that nice and square now the next step go ahead and cut our excess off again I'm dealing with the wind here I'll finish that up better when I'm inside cut off our excess using the tops candy trucker I'll finish that out of the wind so let's see how this thing looks so I've got it all loosened up on the knife I can just put my hand through pull it that way get it is loose as I want or as tight as I want and if you want if you need to adjust it like say you got too much right here you don't want all that excess I could go ahead and just put one other overhand knot in this right here and make that the first knot and then just cut this one off here and then you've got it exactly what you want but right here everything is good I can just rotate this down that way the slider knot is down here out of my way if I'm doing a lot of work so it's pretty versatile very very adjustable and it's really easy to do I'll tell you right now I suck at knots so just the fact that I was able to figure this out watching one video or the dude who's like talking some sort of crazy accent you should be able to follow this and figure it out relatively quickly so there you go that's using two of them for a mech lanyard like right here got tops candy trekker got it up out of the way and it's plenty solid enough that I can just yank it out of the Kydex even if it's tight kite at Kydex and those knots aren't going to totally loosen up and when you want to take it off give it a pull take it off and then for knife lanyards there that just looks like a tied lanyard put it on pull nice and tight you can do your work safely hopefully that helps you if you haven't seen something like that before I'm just I'm working on the different kind of skills that I don't pay enough attention to like knots and things like that so I've just been sitting there you know I'm out shooting the bow and arrow during the day and working on videos during the day and if I'm sitting it sitting around at night watching TV or something like that I'm just grabbing a piece of paracord and working on things that I can use a lot and that is one of the most useful knots that I have learned will always has that on his different lanyards and I was like man how do you do that I just take the two ends together do an overhand knot and it looks like crap but those are pretty cool pretty adjustable I like them so hopefully that helps anyway I'm Chris from prepare my 1 1 thanks for watching be sure to click like share and subscribe follow me on Facebook facebook.com forward slash prepared mine 101 and since it's winter I just added I did have a clothing section on prepared my 101 store prepare my 101.com Ida lead that Paige did a new one and started adding a lot of wool stuff got got some stuff coming up on wool clothing for winter very very soon and since I have become a big believer in wool I wanted to put that in the store forget all that Under Armor cold gear crap I just I finally after a couple years of fighting it and fighting Dave Canterbury and everyone else and I'm like yeah we'll just I want something cool Under Armour if you're gonna be outside you need wool so I added all that stuff to the store you'll see what I mean anyway that's all I got for right now I'll be back with some more videos here soon so see that you

Please explain how to make steak quesadillas : mexican & southwestern dishes

hi my name is Sid Marshall and this is how to make a steak quesadilla a basic quesadilla is done with a flour tortilla cheese and then filled with whatever ingredients you'd like then put on to the stove and fried to crisp it up we're going to take some cheddar cheese and put over half other tortilla on one side then we'll sprinkle on some of our steak and we've chopped up spread it across that half moon and then we fold it and it's ready for the stove you lay it down on one side kind of press these are spatula what we're looking to do is to crisp up the outside then we're going to cut it into wedges cut down the center give it a little dollop of sour cream little pico de gallo on each piece and there you have it how to make a steak quesadilla you

Please explain how to pull out a tooth with a football!

hey Grayson how's it going good what's going on um I just really miss it seen by Fred does it happen at school today yeah ooh so how are we gonna pull it out football tomorrow dad hey oh so I'm gonna get give you the football and I'm gonna tie your tooth to the strings you're gonna throw me the football it's going to oh yeah step one it's gonna be tie the floss on to the football yes all right you excited yeah you have to get that tooth out of there what are you gonna do with notes no front teeth at all hey help me get some salsa that's for sure all right we're tired why are we pulling her too those are super loose ah all right looks like have a tooth up there when I already pulled it out all right well if you tied up how about you throw the ball to Gwen okay here we go we're all tied up you have to try to throw it over the fence okay you're gonna try to throw it over the fence as hard as you can okay we'll get it right up through one two three where is it I found it it's over here yeah I think of that it's pleadian is it yes oh let's see oh my god oh my god oh my god see open up oh yeah baby oh that was a good poem awesome here you go use your prize thank you haha - that's cool let's have a real good luck Oh big what are you gonna do with no front teeth ah you're gonna be eating a lot of pudding by the ice cream oh yeah I think cannot eat the cone because the cones oh oh I don't have to eat the cone but you get the ice cream okay yeah I see it it's hot too physically and Ian see sweetie oh that's a bunch of blood you want me to get me another one no she's okay huh great job Graceland how do you feel about it fine did you know it's cool that it was gonna be pulled out today yeah because the thing from the silk slider that it would get pulled out today yes is just hanging on barely yeah I was surprised to win my tooth the things from a friend at schools I might but that's gonna have to pull this out today hey and I sure did good job good choice with the football the Super Bowl this weekend hey yeah so how does it feel funny yeah funny yeah you look so great so now you lost your bottom two and your top two your bottom two are the big teeth and you got a great big hole there you missed Christmas so you can't sing that one song all I want for Christmas is by two teeth okay I'm going to put it under my pillow and wait until Sarah comes oh yeah what do you expect me from the tooth fairy mm maybe a bag rocks no honey money yeah that's not funny why was a tooth fairy of money please placing it or or ice cream under my power hey you would wake up to a nice second saggy bag of ice cream I have my baby teeth that are gonna come out one day how do you think that I should pull around tell us in the comments below bye thanks for watching

Please explain how to match texture with the knockdown texture sponge | priming tips pt4

hey welcome back to the channel in this video I'm going to show you how to do a knockdown texture repair I'll do a little mud work and then I'm gonna use the knockdown texture sponge to match the knockdown texture on these bathroom walls I'll also show you the proper primer to use so you don't get any flashing when it's time to paint and if you're new here my name is Paul and I've been doing drywall and painting as a contractor for the last 22 years if you want to amplify your drywall skills and learn how to match textures subscribe now to keep up with all my latest videos I'm here at a local stereo shop to repair a water damage ceiling and also repair a knockdown texture on the wall where they had removed some shelves so the first thing I'm going to do I've already got the drywall in the ceiling on this grate any high spots where painted built up or anything from where the shelving was next I'm going to mix up some twenty-minute mud I'm not going to show you the whole process I'll put a card at the top of the screen for that video so I'm just gonna put it on my 12-inch knife and pull it across where I need the mud just try to keep it flat don't pile up the mud if you play it right you can get this in one coat not really a big area to cover just wear some painted build up from the shells being there for years also gonna fill a couple screw holes or toggle ball holes that were there as well and it hit all this with the knockdown texture sponge once it dries and I sand it all right so I'm gonna use my sanding sponge it's a little tore up from on these knockdown texture walls it's a hundred grit sanding sponge it's easy to use and it contours in between the existing texture so that all the line that's basically what I'm doing is trying to get rid of all the lines I like to fill it with my hand and if there's any dips or lines you can just sand them out if the dips too big you're gonna need to do another coat over the area try and keep it at a minimum though I just wanted to show you the whole process so you at home can do it as well all right I got a couple spots over here I got the plastic up because they've put a brand new vanity in the bathroom before they call me to fix their water damage ceiling and knockdown texture all right so here's the knockdown texture sponge I'll leave a link in the description where you can get one of those basically you just want to get the joint compound it's thin down just a little bit with water to get the air bubbles out and get it nice and creamy you just want to get it on the sponge and dab in pull it's pretty simple to use dab and pull when you pull it it creates like a stalactite that's what that's what you want to knock down to create the knockdown texture you're trying to match on your walls or ceiling you just want to work the prepared areas first then you're gonna feather it out so when you prime and paint it it blends nicely so as you see I'm just working the the repaired areas on the new joint compound you just want to get that pattern once you've got it all up you're gonna want to let it set up for about 10 to 15 minutes before you knock it down hey be sure to hit that subscribe button if you want to learn more texturing techniques drywall painting I've got tips and tricks from my over 20 years experience just getting the mud up there I'm gonna come back and blend it all in that pulling technique is what brings this tool AG tide out there I'm blending it now to nothing I'm taking just a little bit of joint compound and just kind of blending it to nothing this helps for the final product going up this other side alright go over here in this spot it was just a couple talked about holes the knockdown texture sponge perfect for little spots like that if you try and spray that with a hopper or texture can it's going to be a big mess and it's probably not going to match too well alright so I'm dabbing and pulling in that tight spot with the plastic just need to get some blobs up when you knock it down and look great alright so I'm gonna be using my 12 inch it's a blue steel drywall taping knife you're gonna go real light over the texture you don't want to push down or put any pressure just glide over it see what it's doing if it's musha's out too much you need to let it wait to set up just a little bit longer this is looking good though it's a pretty heavy knockdown texture on these walls so you definitely can control what your texture looks like by the time you wait to let it set up I waited about 15 minutes on this we'll give this other side again I'm just gliding over to the texture barely any pressure at all just letting the knife sit and do the work I'm gonna go ahead and run a fine bead of caulk right there in the corner after I prime that way it's all sealed up in the caulk will adhere you want to maintain that 90 degree angle in the corner but just a real fine bead of caulk and knock this down real quick over here my favorite spot just colliding I'm using my six inch knife gliding over it alright back the next morning all the textures dry so what I'm gonna do now is it's just a little rough so I'm just going to hit it with my sponge and sand it down just barely knock the top off take some of the rough roughness off and do the same along the ceiling it's gonna blend rather nicely and then I'm going to hit it with some kills oil-based stain blocking primer just on the repaired areas one there was a water damage so that I don't seal up any water stains that could come out that might be there and - it'll seal up the repaired and retexture areas real good so that it it won't flash with this on my gloss paint that I'm putting on so I'll shoot some video of the process stay tuned alright so I'm going to take my broom and just dust these areas off to get any loose debris or anything before I prime it I'm going to use a kills oil-based stain blocking primer to seal the repaired areas in this will also help them from flashing when I go to paint them alright got the ceiling and the wall areas that I prepared and we textured with knockdown texture sponge so far so good everything's looking like it's a match so we're proceeding to the next step which is I'm gonna paint the ceiling it's semi-gloss I'm just gonna feather it out into the ceiling this is a bathroom of a stereo electronic shop for booming cars and stuff so they're gonna be putting the cabinet up here to match the rest so they're not very concerned over here so I'll just skip that so it's looking good time to paint alright time to do the first coat over the repaired and primed areas of the walls I'm using a 3/4 inch roller nap and a grid for a five gallon bucket goes a lot quicker I'll be doing two coats on the walls of this bathroom just get a nice even coat you would all want to put it on too heavy I used a three-inch Purdy brush to do all the cut-in work links to all the tools I used in this video down below in the description I'll leave a link to my most popular knockdown texture matching video in a card above be sure to subscribe to my channel to keep up with all my latest videos alright got that area repaired textured priming painting can't even tell those over there there it is I also did the sponge knockdown texture all the walls can't even see it there is a medicine cabinet going up right here so that's gonna go go away ceilings painted walls painted turned out real nice customers happy alright so we'll see you on the next one give us a shout be sure to check out my video library of over 200 helpful drywall texturing and even painting tips and tricks if you haven't already subscribed go ahead and hit that subscribe button now to keep up with all my latest videos check me out on Facebook Instagram and Twitter

Please explain how to make mint chocolate chip cookies tutorial

heyo so today I'm going to be making a mint chocolate chip cookie oh my goodness now I'm also going to be a dying this cookie agreen this will probably the only st. Patrick's Day themed thing that I make because Easter is right around the corner I've got a lot of crafts and a lot of goodies planned for that so I need to get started on that right away but anyway this is a great recipe and I just wanted to share it with you so let's just go ahead and get started on the mint chocolate chip cookies okay to get started on our mint chocolate chip cookies go ahead and pre-heat your oven to 375 degrees and you're going to need a mixer and a bowl now you can use your hand mixer it does not have to be a stand mixer and also you're going to need to just a medium sized Bowl now to our medium size Bowl we're going to go ahead and we're going to add our flour so we need two and a half cups of flour one teaspoon of baking soda and 1/2 teaspoon of salt we're just going to mix that and we're going to set this aside so that we can mix it with our cookies and just a little bit in our batter so set that up there out of my way okay now go ahead and get your movie or mixer ready now to this mixer we're going to add a cup of butter or that's two sticks get my butter here you can just have that at room temperature it goes about it there and we're going to add our sugar now you're going to need a 1 and 1/4 cups of sugar and we're going to raise my limit isn't it we're going to go ahead and just mix this really well until it's incorporated really good together and it doesn't take very long because your butter is nice and soft okay awesome now to this we're going to add two eggs and we're just going to mix that together with our peppermint now you're going to need oh let's see where's my peppermint you're going to need a teaspoon of peppermint and you can use you know whatever brand that you like so in my peppermint goes and also at this point this is where I'm going to put in my food coloring and I'm going to be using green because of Saint Patrick's Day so I'm just going to put some of that in now it depends on what kind of food coloring what brand of food coloring you use how much you'll need so you'll just kind of have to play that one by ear and see what it's going to be like after you put it in stir you can always add more if you want a little bit more color okay so now I'm gonna go ahead and add in our flour mixture that we already mixed with our flour and our baking soda and our salt let me get a spoon here I got my spoon okay so I'm going to gradually add this in until it's well mixed up together okay now at this point I'm gonna go ahead and add my my chips my chocolate chips you need about a cup and a half now you can just add just the chocolate pieces or just the white chocolate pieces if you want but I like to mix mine together in this particular recipe so I'm putting a about 3/4 cup of white chips and 3/4 cup of milk chocolate chips right into our cookies here okay awesome awesome now we are ready to go ahead Oh YUM look at that awesome okay so we're ready to go ahead and get this on to our our baking sheets or even popping them in the oven okay so we can go ahead and get our mint chocolate-chip cookies out onto our baking sheet now I have lightly sprayed my baking sheet with a cooking spray and I'm just going to be dropping these cookies onto this baking sheet oh by the teaspoon fall they're just so you got a nice little ground-mounted cookie and let me tell you this peppermint and this cookies are smelling oh so yummy and cannot wait to try one and look at that beautiful green you know I can't beat that for st. Patrick today okay so into a 375 degree oven of about 10 to 12 minutes until they're kind of getting nice and brown on the edges okay also our cookies are out of the oven and it smells absolutely fabulous in here I wish you can smell it it is awesome making me so hungry so anyway I'm gonna get all of these out onto my cooling rack and let them cool now this recipe makes about three dozen cookies so you know you can adjust it if you need to make more just double up your recipe but then they're smelling oh so yummy okay I hope that you will give these mint chocolate chip cookies a try because they are oh so yummy I absolutely love these now you do not have to dye them green if you do not want you can dye them a different color even if you like but anyway they're just really really good I think that you'll really like them so I appreciate ya'll watching I'll see you again next time bye now

Please explain how to remove front door panel 02-08 dodge ram

brought to you by 1a auto calm your source for quality replacement parts and the best service on the Internet hi I'm Mike Greene I'm one of the owners of warning Auto I want to help you save time and money repairing and maintaining your vehicle I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1a auto calm the right parts installed correctly that's going to save you time and money thank you and enjoy the video in this video we're going to show you how to remove and put back on the door panel the front door panel on this 2004 Dodge Ram same as any ot 208 Ram 1500 tools you'll need our t40 Torx driver a phillips screwdriver and a flat blade screwdriver to remove your front door panel you're going to start by removing a t40 Torx screw and hold your handle on right there okay and then you're going to remove four Phillips screws one there one up here and two down lower part of your door panel does my t40 Torx driver okay I'm going to speed up here take that t30 screw out and then your handle comes off and then I'm going to start with the Philips screwdrivers take those two off and then slightly take my jacket off so you can see my one ayato sweatshirt and remove the two lower Phillips screws I use a regular screwdriver carefully pry up your switch plate here and then pull it up and both these connectors they have a little button right here press the button and work the vector the switch same thing here button right there over the wok here okay and before you put the door panel back on you want to take this lock bezel and push the clips in okay and pop it off just has little teeth there it just has a little teeth there that holds it in so you just kind of push them with your finger over put it back on what you want to do is there's teach at the bottom kind of rest it like that and bring it up pull your harnesses up out of the way lock your door press your board walk down get that up and over pull it back up might have to pull it up just a little bit slide it down put the four Phillips screws back in okay well fast-forward through just putting those four Phillips screws in and tightening them up they are switch smaller connector and the larger connector feed the wire down in down in our door handle just go for my extension in my bit in into place just pretty much start turning which finds its own way we hope this helps you out brought to you by ww1 ayato calm your source for quality replacement parts and the best service on the internet please feel free to call us toll free 888 eight four four three three nine three where the company that's here for you on the internet and in person

Please explain how to lay+grout flagstone slabs | pro grouting natural stone sand joints |masonry patio pavers work

Hi this is Carl the landscape guy. In this video I will show you how we complete cement-bonded grouting of natural stone slabs. This chapel forecourt is being redesigned. The natural stone slabs laid in sand have sagged over the years, forming trip hazard joints. The plates will be re-installed later, so they will be picked up, cleaned and stored off to the side. The dirt is excavated out to the planned size and a base layer of mineral crushed stone is prepared and compacted. Then we set the frame stones. On the gravel surface, the sandstone slabs are now placed in a layer of permeable concrete. An adhesion compound is applied to the underside of the sandstone slabs. The entire chapel forecourt is laid this way. Meanwhile, the work for the sandstone wall has started. The wall will frame the little forecourt at one side as a retaining wall. You will find a detailed video about natural stone masonry on my channel, I’ll also link it at the end of this video. Okay that was it for the preparatory work, because this video is specifically about how to grout natural stone slabs. Before grouting the slabs are watered well. Moisturizing is very important, even more when it is hot out, so that the natural stone does not draw moisture from the fresh grout filling later on. For mixing, we fill a bucket with water. The mixing ratio is 5 L of water per 25 kg of cement. If the mixing ratio is wrong, color differences may occur after hardening. Therefore, always try to use the same mixing ratio for the entire area. For very narrow joints, the mixture can be a little thinner, so add more water. These are joint widths of about 1-3 inches. With these wider joints, the material can be mixed with a little less water, making it a little thicker. Mixing is best done with an electric mixer. Some mortars have coarser proportions of material, so make sure you have the right mixing tip. I would recommend one that is open at the bottom for easier and quicker whisking. We slowly add more water until the mixture is right. As soon as the dark filler material begins to deposit black streaks on the surface, it has enough water. Here we use the Marbos PFM - ZE melan in 25kg bags. The mixed batch should then be applied promptly onto the slabs. Since the mortar starts to thicken immediately, we start to work it into the joints right away. The joints are to be well-filled and the excess material is to be pulled off. The quicker the excess material is removed, the less it needs to be washed off later. The outer edge of the slabs joints should be sealed up before grouting, so that no grout can seep out the sides. If the mortar becomes too thick, it can be slightly rewetted with some water. While one employee distributes the grout, a second guy should mix the material so that there are as few breaks as possible during grouting. The mortar must now be washed from the surface of the natural stone slabs before it sets too much. But wait until the new grout is slightly hardened. There are two methods for cleaning the slabs that we would suggest. For the first one, it is smart to lay out a wooden board to protect the new grouts. For washing, a professional wash box should be used and filled with clean water. Then the natural stone surface is washed with a sponge board. First, a surface section is washed with circular movements. This loosens the mortar from the surface and smaller groves. Then wash out the sponge board before wiping the surface clean. It is important to always pull in one direction and put the sponge board down on its entire surface. As soon as mortar streaks are visible, the sponge board should be washed out again. Also, depending on the size of the area, the water in your box should be changed every now and then. With this method you can work your way out of the corner. For surfaces with a higher proportion of joints, it’s possible to easily pull out the joint with the sponge. Try to pull across or diagonally and not along the joint. For deeper spots a regular cleaning sponge can be used, but this is not suitable for washing larger surfaces. The second option is to wash the surface by spraying it with a fan spray nozzle. This method speeds up the process, but requires more attention and practice. With the nozzle, the excess material is sprayed off the surface. The intensity of the beam can be varied by the distance. The jet of this Gardena nozzle is very appropriate for this. Without practice, however, this method can easily flush out the new grout. You should start in a corner and work your way out. A coworker should help with the squeegee to remove excess water from the surface. And here is the result. The gray grout provides a nice contrast to the slabs and transforms the chapel forecourt to a stable entrance area. Now, only the walkways and lawn need to be done. Framed by the natural stone wall, the new forecourt fits seamlessly into the ambience. This video was created with the kind support of Balzer Landscaping Construction Company. I hope this video was helpful. You can find product links in the video description. Please subscribe to my channel for more videos. If you enjoyed the video write me a comment, hit the thumb up and share the video with your friends and colleagues, thank you for watching, until next time, I’m Carl the landscape guy.

Please explain how to do a polka dot pattern | wedding cakes

today we want to make a polka dot pattern on our wedding cake and we're gonna be using gum paste you could also use fondant but gum paste has more gummy chemicals there in it so when you mix it together it starts to become more rubbery more elastic and stick together if you do it with just plain fondant when you lift it up off of the table to attach it to the cake it's actually gonna lose its shape a little bit and we want to make sure we have perfect circles for our polka dots so I'm using a yellow gum paste I just colored it with a little bit of yellow and that's because we're gonna go back later and paint them in gold and I'm gonna have a nice base color to start off with so I'm gonna just use a small handful wrapping up anything I'm not using and I've got a little bit of fat here and that's just gonna soften up our yellow gum paste to make our dots instead of using cookie cutters I'm actually using some tips from piping bags so I've got a 8:03 here and I have a 807 and I'll be using both sides so you can use these two tips interchangeably to get different sized polka dots so I'm going to roll this out you could just use an acrylic roller in your countertop I like to send mine through a pasta machine so that they're really nice and consistent as far as their thickness beautiful so here I have a nice sheet of rolled out gum paste I'm gonna use the thick end first really get it down then you'll see you get a perfect circle out of it it sticks through the center like that just pop a paintbrush down and I'm touching them very gingerly so it's not to distort their shape if I were doing fondant it would be sticking to the table a little bit more the gum paste is more cooperative it's tempting to try and go doot-doot doot-doot and have them stack up inside the tip but they will get stuck that way and will distort and paint them about okay that should be enough to start with I'm using regular water to attach these to the cake but you could also use a piping gel and we're just going to be doing a polka dot pattern on our medium tear in the middle here so the first thing I always say is to look for flaws I have a little ding here I want to make sure that's covered up this is a perfect opportunity to cover that up and no one will ever know just like that it's gone if you ever see something funny on a wedding cake there's a good chance there's a ding underneath it so the trick with doing a polka dot pattern is spread them out first you don't want anything too close together when you're working in smalls work in twos or threes so when I apply these do one here and have one fairly close by I'll be cute we're going for cute and happy not measly so it's all about spacing if you do have to go back and take something off don't if you can avoid it at any cost if you simply have to you're going to use either peel it off or scrape it off with a small spatula like this also don't be afraid to cut them in half it helps it to look even more realistic if you've got one coming up out of the bottom or from the top see that's what you want to avoid two that are very similar to each other so I'm just gonna pop that right off and move it down here this takes a little practice to get used to the way it should look but it's such a great cute payoff and that is how you put a polka dot pattern on a wedding tear

Please explain how to make a frosé (wine slushie)

hi wine lovers my name's Kimberly and welcome to this very special edition of wine on a dime previously I've done a review of menage a trois 2013 California rose a wine now you may notice that this bottle is empty sad thing for wine on a dime well I had a special request from one of my fans to do a special edition of this show with a frozen rose a cocktail so after I reviewed this fine frozen for you guys if there's anything we do odd wet on a dime it is that we take requests so I'm gonna grab that frozen rozay out of the freezer and we're going to mix ourselves up a little cocktail afros a a frozen rose a rose a rose a ok so this recipe i received for my friend was from basil and bubbly calm i will put their information down below if you want to check out that recipe look at their blog they have some wine recipes on there here interested in wine cocktails so this recipe called for a bottle of rosay and they said to try a darker Rosie I can't really remember if this was a darker Rosie and I didn't use the whole bottle because I did a review of it so whoops we'll see how it turns out well I already frozen so i can show you this is my see my brother than Rosie in a UH ten where buckle I actually froze it in a pan like a cookie sheet like a small one and then I broke it up and to conserve room in my freezer so this is some frozen Rosie and it is a little bit slushy there is what this has a alcohol content something oh this is 13.5 that's pretty high for Rosie the next thing it calls for is a half cup of water and a half cup of sugar you were going to make simple syrup it also calls for some strawberries quartered and hold so what you do and I've already done this is you're going to make your simple syrup and then after it's done boiling like basically we make simple syrup you we put equal parts sugar and equal parts water you boil it and you stir it make sure all the sugar dissolves in the water once you remove it from the heat you want to do that right away you put the strawberries in and kind of make this strawberry syrup and that is kind of the sugary base of this it also calls for some lemon juice which that's not too surprising if you've ever baked or made strawberry pie lemon juice really brings out the flavor of strawberries so I'm excited to see what this is like okay so i have this syrup that i made on my stove kind of see that here don't want to dump it out um I let it cool off in my fridge I just put this in my fridge really sure if you're supposed to do that ah but you're supposed to let the strawberry it's kind of like soak in the syrup for 30 minutes and cool actually you know the recipe said to strain the strawberries but I decided not to strain the strawberries because I wanted to leave the strawberries in there I'll tell you if it tastes like crap and if it does maybe it will be because i love the strawberries there but i can't imagine leaving the strawberries in there making it tastes worse so I have my blender here and we will get started i guess i will put all of this in their sticky sticky you can see that the syrup kind of a pink tinge and the strawberries soaking in it I'll be sticky oh I'm pretty tasty simple syrup very healthy half a cup of sugar in there I have my frozen rozay i guess i will just put in here you know what I don't have that supposed to gain here is a cup of ice so we will get that in a second search I want to get this everywhere oh I got frozen bruising in my lap okay actually came out pretty nicely this melts fast you probably want to enjoy this right away you put some lemon juice in there I guess I could have measured this out but I like lemon if you want to be precise yeah that's the rest of my lemon juice I put all of my lemon juice in there this was not the first time I opened it I promise okay now i have my cup of ice here put those ice cubes in there and we are going to make this if you're curious about what's kind of blender i ah this is a ninja prep pro i like it it's loud I'm gonna have to edit this sound so I don't you know oh we're module eyes feel the great put it up hey um with this it works pretty good so you just have to doesn't it make still smooth so we'll just make it a smooth this bad boy out oh look so fancy gonna mix all the ice cubes in there try this bad boy out what uh oh looks like a like a smoothie you would make in the morning whoa this is sweet it's probably sweeter than its supposed to be because I didn't have enough Rosie that's good it tastes like a strawberry daiquiri hmm you kind of get the taste of the wine in it I'm not obviously picking up any special notes or anything it'll be a good pool party treat if you go to pool and a party to be at I think it definitely pairs well with pool party it probably would be my first recommendation maybe sitting on the patio reading a book girls night girls day as someone who lives in Arizona and it was like a hundred me today this is a nice treat cheers to you froze a the trendy cocktail of summer 2016 I'm 22 now because I tried you you

Please explain how to: bake bread in the sun oven

you okay on to some bread it's actually pretty cool out here there is also the situation on the vs you can see we have some intermittent cloud cover some kind of anxious to see how that happens we've got a good bit of Sun though and the I just took the soup out a minute or two ago and I'm very impatient its cranking up to close to 325 now so I'm about to go ahead and put the bread in but I want to show you I took out the little leveler thingy this thing that swings for the soupy stuff you know it swings to keep the soupy stuff level and so I took that out so it should leave plenty of room for the bread to rise and because it's a little after one o'clock things are come up you know this sounds high in this guy I've taken the who you would call what's that thing telescoping leg and put it all the way in okay there it is it's in my watch on me the book says it takes about 45 minutes we are right now hovering at - whoa 325 before intermittent cloud cover oh no might hold off might not be a problem you hope sorry I don't make more make it easy but I will tell you you do need mitts to reach down in that puppy because it really is hot like an oven so if you're wondering if it's a slow cooker unless your slow cooker like is on steroids I would say this thing is much hotter than a slope and I'm just anxious to see how the bread does because that's my biggest thing I'm wanting to cook in here for some reason um yeah I'm walking out here again I'm like a kid in a candy shop I can't stand it it stayed about 3:30 so far at least every time I've come out to check it again I'm like I'm like a little baby I really watch this because it's getting brown on the top it's not moist and you know like gooey looking it looks crispy yeah we're looking at about 325 330 and I have reject rate let's try it let me try to talk I have adjusted this probably every 20 minutes to try to completely face the Sun every time it's not a big deal to do that I forgot for awhile and it seemed like it maintained the heat really good but anyway up 15 more minutes it's supposed to be done I'll take it out and show you guys I'm doing like a little happy dance because if this works it makes my already cheap bread cheaper you know I don't know if that's possible to say and I can do this without spending money on electricity and if I don't have electricity okay the smell on this thing is wonderful that's it oh my gosh whew you didn't I nice and hot I'm gonna pull it out okay maybe this will work I'm not sure you can see it I hope I got hump it up the end yeah we're not going to do that we're going in we're going in okay do you know how hard it is to man a camera balance loaf of bread so you don't drop it off the side of the deck and open the door all with two oven mitts on that is so not easy okay here it goes the unveiling yeah that's good let's see if I can make the shot work hey you're in the dark better baby here we go oh my gosh it's perfect okay enough of those things it's crispy it makes the sound look at that even golden all the way through it's official I am fully fully sold on my son of it how long let's begin which on my collar tomorrow god bless ya'll take a look at the Sun Oven if you're looking for an alternate way to cook I am very moist

Please explain how to make carbonara and roasted chicken

Please explain how to water fescue grass seed seed germination in 5 days!!!

pays Pete GCI turf probably the biggest asked question of the most asked question I get all year long is right so we leave your yard and we've aerated and seeded the question is how long do I water for how much to a water I get asked that hundreds of times during the fall so I want to show you a little trick that I learned to talk myself out of water um the trick to grass seed and the trick to getting it to germinate is to keep the seed and moist well keeping it moist because mean a lot of different things for a lot of different people and what I mean by that is every are different every irrigation system is different every microclimates are different there's hard spots soft spots in dirt shady areas full Sun areas and dirt so honestly I can't answer that question I've no clue I can give you a good place to start those the way I run my irrigation is I will run the rotor heads and what a rotor head is is it pops up out of the ground and it rotates it may rotate 360 degrees it may rotate 180 degrees I don't know the rotation on it so that's how you know it's a rotor head the other type head is a pop-up head and what a pop-up head does it just pops out of the ground and sprays a flat fan mist typically those heads put out twice as much water as a rotor type head typically so the trick to seed germination is keeping it moist and a good place to start is about four to six minutes per zone four times a day this is everybody almost twenty four minutes a day that's a good place to start out now a way to check yourself to make sure you're keeping the seated would moussed when you come home from work it's a simple test go out in your yard look for one of the cores that was pulled out of the ground during seeding and you simply want to take your finger and fill it between your fingers fill it if its moist squeeze it see how it gets a little bit of shape back to it what you don't want to see is this when you squeeze it and the dirts dry that's what we don't want to see dry moist this will if you see yet this will give you seed germination in a hurry really quick like so if you are a non irrigated yard and your yards small please try to water as much as you possibly know it's a lot of work but please help us out get the water on the yard if you're a non irrigated yard and it's big and it's just impossible physically possible to water and keep up with it then a we're just waiting on the weather 95% of the time rains come we have no issues seed comes up so it's just going to be a matter of patience and I hope this helps hope it gives you a good starting point and remember to check your grow your yard at least every other day to make sure it's staying moist we want to get it moist and keep it moist going all the way into to the winter time check you later the trick to seed germination is keeping the grass seed moist I'm going to give you a good example of that so I'm back in town and what I found is absolutely no surprise to me germination look at the little baby grass this grass was put in the ground this grass seed was put in the ground or Friday Friday afternoon it got one shot of water I set the timer on my irrigation to come on four times a day this my particular Y it's full Sun so it's going to dry out a little quicker so I set it for ten minutes of zone so that's 40 minutes a day now before you go out and set your irrigation timer for 40 minutes a day split up into four times the zone you you need to listen you can't do that because my yard may be different than your yard my god may hold water differently there's no shade to contend with the ground may not be quite as compacted so this is why it's important that you go back to what we said earlier and you check for that they're actually starting to dry out a little bit more that's because I haven't run it the water today I cut it off for the one day to let it drop just a little bit so I'm gonna go right back and set that timer and keep going but this seed was put in the ground on a Friday afternoon all right Saturday Sunday Monday Tuesday I came home last night Wednesday that's five days I came out here with a flashlight and there you go I had germination so five days I've got germination there you can see there's still plenty of grass seed left so I'm going to continue with the same watering schedule at least for the next week until I get uniform coverage meaning the majority of this grass seed is germinated once that happens then I will revert back to watering one time a day 30 minutes or so just to provide that new grass seed with some water I'm not going to dare let it dry out when you let it dry out that's when the mistake happens so keep an eye on your grass seed keep an eye on your yard keep an eye on the moisture levels on the grass seed and here's the proof in the pudding you can have grass seed germinate in five days thank you

Please explain how to change the cabin air filter in your car.

at Advance Auto Parts we're ready with answers since about the mid 90s a/c and heater systems began doing much more than keeping you cooler warm inside your car they began to purify the air you breathe thanks to cabin air filters so when was the last time you changed yours cabin air filters should be replaced every twelve to fifteen thousand miles or basically every year as you drive down the road cabin air filters separate all the stuff you don't want to be breathing and most importantly purify the air that is recirculating inside the car over time your filter will become clogged leading to a musty odour and decreased a back performance in fact pollen and harmful substances inside a vehicle can be up to six times more concentrated than outside the car so replacing your cabin air filter is a must your cabin air filter or filters will more than likely be in one of two places inside the vehicle under the dash or under the hood back by the firewall don't confuse your cabin air filter with your engine air filter refer to your vehicle owners manual or ask an advanced team member for assistance today this particular vehicle has two cabin air filters and they are located under the passenger side - behind the glovebox to remove them reach under and remove the screws securing the cover then pull down the access cover at the bottom right of the housing surrounding the evaporator core and slide the filters out of the housing replace them with the new ones and re-secure the cover protect your passengers and yourself from harmful spores and pollen breathe easy again replace your cabin air filter today at Advance Auto Parts we're ready with answers

Please explain how to use an electric toothbrush - aj hedger

this short video is going to explain to you the viewer how to brush your teeth correctly efficiently and to the best standard using an electric toothbrush which has quite a different approach to the manual brushes you may well have been using in the past many people think that tooth brushing is to protect your teeth from decay such as in this model and decay that can be in between the teeth decay is caused by sugar and sugar alone sugar and fruit sugar and food and it gets into the deep cracks of the teeth called the fissures and it gets in between the teeth where people are very poor at cleaning the only way to stop the gums receding and gum disease is to use a toothbrush efficiently and effectively the electric toothbrush here is far more efficient than a manual brush all the research papers prove and show that and so in our practice we would like everyone to be using electric toothbrush and most do it rotates at incredible speed I'll just demonstrate that and it oscillates so it goes backwards and forwards so it doesn't make the gums recede and it doesn't damage the dentin or the tooth of the neck of the teeth if the brushing is not done correctly the gums although they might look okay they'll probably be red and puffy and swollen but the bacteria will get down the margin and if I take the gum off this model it'll show you how the gums have receded and eaten away the bone it's the bone that supports the teeth and if you eat away enough bone the teeth get loose and will eventually fall out so gum disease is more important than tooth decay in long-term prevention because more teeth are lost with gum disease it's painless and it's continuous lack of good cleaning now this is a tooth and gum brush it should be used not just for brushing the teeth like some people think that you should just brush the teeth it's the gum as well as the teeth so half of the brush needs to be set onto the gums half on the teeth I'll show you that without it switched on start at the back leave it in place for a wee while move it along move it along half the brushes on the gums half on the teeth all the way round remember you can rotate your head as well you don't have to keep your head in one place when you're brushing your teeth behind the back one all on the insides give it a little time on each tooth a number of seconds on each tooth then when you finish brushing outside you do the tops and then you will have covered all the surfaces of the teeth brushing should take one minute on the top one minute on the lower this brush conveniently vibrates when you've reached certain timings and it also has a clock that you can watch to see that you're doing the correct amount of time it's important to realize that it you need to TP first with the interproximal brushes and then the floss before you start the tooth brushing that's to clean all the areas between the teeth before you finish on the outside the amount of toothpaste you put on it is about the size of a pea no bigger because you do not need too much you do not want to be swallowing it or wasting toothpaste so a small amount on here for the purposes of this demonstration I'll use it without toothpaste and it's exactly as we showed on the model you'd switch it on we're imagining it's on and you'd hold it against the gum and the teeth remember there's lips in the way you have to push them out the way on the lower push out the lips and then you'd start the moving along with it vibrating and rotating all the way along the bottom holding a prynt tooth are using it for about two seconds on each tooth behind the back of the back tooth and this is what's really important to see on the lower is to get under the tongue so you actually have to lift your tongue over the brush so the brush is underneath the tongue otherwise your tongue will have the tendency can you just show me Heather to push the brush up and the brush has to go on the insides really deep down onto the gum so half the brush is doing the gum as you can clearly see here then when you finish doing the outsides you do the tops of the teeth for a similar amount of time we're imagining it's rotating and wearing but for the demonstration we're having it switched off now if I show you the top teeth but with it switched on you'll get an idea of the real time we're just doing this quarter into the teeth it's got a little bit of toothpaste on it imagining all the way along all the way along back at the back to all the way on the insides all the way on the insides and then finish with the biting surfaces that is how to do it with the electric toothbrush

Please explain how to tune the snare side drumhead

hey guys this is Cody that sounds like a drum cadence independent media productions and today we're going to do a little bit of a deep dive on snare side heads specifically we're going to take all the other variables of tuning out of the equation and just make kind of dramatic adjustments to the snare side to inspect how it affects the sound of the snare drum so what we've got today again is Ben's super phonic 70s five by fourteen beautiful little drum sounds great and what we're gonna do today is we're going to leave this batter head where it is which is sort of at a medium-high pitch and what we've done is put a brand new snare side head on the bottom of the drum and we haven't actually pitched it up enough even for it to conform to the bearing edge yet some of the screws are actually below finger tight and this is just kind of where again it ended up from getting the hoop level which you know you can check out that process in our original episode one snare video so what we're gonna do is ignoring the pitch of the bottom head whether we're talking about each tuning lug or the pit the head overall we are going to slowly bring the head up and I'm gonna do quarter turns and then retention the wires so that they sit you know flush on the head and sort of discover how much of an effect the bottom head has on the drum because super Phonics are versatile and kind of quality instruments there's gonna be a lot of usable sounds in this range but this also is designed to illustrate that each of the heads has a huge impact on the sound of the drum and sometimes you can just change one of them and achieve a really different sound rather than thinking that you need to make huge adjustments to both sides of the drum if you want a different tuning so for just a reference of where the pitch of the batter head is I'm gonna mute the bottom head with my hand and just play the batter a little bit just to kind of give you an idea of where we've set it up now we'll get the wires on and just kind of see what it sounds like in this range I'm making sure not to over-tighten the wires or choke the drum but they're definitely engaged they're not loose and flopping around too despite how it might sound so the the bottom head is extremely loose there are a couple of spots along the edge of it that I can almost feel a little bit of a wrinkle and I did just level it I didn't tune it so there are some wild overtones because the bottom head is so low it's actually making some of its own kind of pitchy craziness that's coming up through the top of the head and now it I mean it's already it's got some good crack to it it's kind of fat but it's also a little bit messy and it doesn't have a lot of brightness in the snare so this is an interesting sound for if you don't want the wire the sound of the wires rather to be super crispy and brittle but there's still a fair amount of attack here so you can get kind of a sound that in my mind is a little older or more kind of crunchy and vintage sounding just by pitching down the snare side head some and you can experiment with this with any drum and just kind of see what's gonna give you the next step is it's gonna flip it over and go in the star pattern and again you know you can watch the old video and see how that goes to just bring the bottom head up a quarter turn and then check it out again so we brought the bottom head up and this means that if we want to have the same tension on the snare wires we're gonna have to tighten them a little bit and as you can hear from this drum right now the the wires are looser because we've brought the head and the rim away from them which has reduced the pressure on the strings and all the wires from below a quarter-turn is not a lot it's it makes a pretty big pitch differential on the bottom head but it doesn't actually move the hoop that much so it still sounds good without even tensioning the wires at all so this is a little bit tighter sounding but there are also some wild overtones in the edge because of changes that have happened to the bottom head as we're tensioning it up they're starting to be some dissonance in the edge which you can probably hear and if I were to get rid of that I would do a little bit of adjusting to each lug on the bottom head to try to even out its pitches just a little bit and I might end up doing that to the top head too but rather than doing that we're just going to go up another quarter turn and see what happens next so now we've gone up a half turn from where we started and probably the most dramatic change that I'm hearing here actually it hasn't got anything to do with the wires right now it's how much more tone there is in the drum now that the bottom head has been raised up when it was that low before it didn't have enough tension on it to promote the resonance of the batter head back up through and make a big note and now we haven't changed the batter head at all it has a lot more sound coming out of it and a lot more resonance at this tuning just from changing the bottom head now probably the most surprising part about this particular series of adjustments we did is we only went half a turn on the snare side head and to my fingers now it's extremely tight just from that much and before it was pretty sloppy I think I could have put a dent in it with my finger if I'd press hard enough and now it feels pretty tight um not tabletop tight I can still move it a little bit but it's it's hard now and I think if we were to go another quarter to a half turn it would probably choke the drum out in a way that wouldn't necessarily give it the best tone but there's only one way to find out so we're gonna try it again we're gonna go up another quarter of a turn just to be safe see what happens I went ahead and checked the heights with the ruler since the concept of a quarter-turn is sort of an imprecise measurement and pretty much we're in the ballpark still things have stayed put and now we are in to where it's like hard to press into the head and get it to move at all I'm not pressing very hard and I wouldn't recommend doing that either because you can't put dents in the bottom of the head a lot of times when you take your bottom head off you'll see marks from when you were setting it on the stand just wear like the little hands from the stand of bumped into it so since we just listened to it a moment ago with the wires off we want to do that again so you can hear that the pitch has changed even though I haven't changed this head at all and there's a lot less tone now and this is telling me that this particular pitch relationship is stifling some of the resonance and I know that if we raise the batter head up a little bit they would start to work together a little bit better again make a little bit more of a note but right now we're into a zone where the drum is getting choked out a bit from the snare side head but there's still some tone in the top and I think it's going to be a very cutting kind of Stewart Copeland sort of sound once between the wires on that's actually sounds pretty good I don't think that I would go much higher than this for the snare side head further than this some of that satisfaction in the feel of hitting the drum really heart starts to go away as it starts to choke out and it'll also start to make the lighter stuff that you do have a little bit less character because the heads aren't interacting with the wires in such a nice way the well the reason that we're doing this is because an awful lot of people have written us to say I'm really excited to experiment with the snare side head because I was always just told that you should tune it up as tight as it'll go and then that's what you do with the snare side head and I really feel kind of opposite about that I feel like experimenting downward with the head is gonna tell you more about your drum and I think that cranking it up is absolutely a valid sound if that's the sound you want but as a rule I think that experimenting in the span between finger tight and like a turn and a half at most is probably all that you need to worry about the actual span of exciting pitches in the sanera set head is a little narrower than the batter side head you can really go super low with a batter side or extremely high two and have them still kind of function but because snare side is so thin it's a little bit narrower of a set of options so check in next week there's going to be a second part to this where we keep the snare side cranked and we experiment with the batter head and see what happens in terms of like what ranges are usable and what it does to the overall sound of the drum and as usual if you like what you see please comment on the video give us a like please subscribe and tune in next week because there's a lot more to do

Please explain how to make cold brew coffee - healthy recipe channel

welcome back my friends i'm going to show you guys today a recipe that you're going to be thanking me for later if you're an iced coffee drinker this is so simple and it's basically cold brewed coffee this is like for any coffee drinker that likes iced coffee this is a game changer um all you need is basically water a mason jar or some kind of jar with a lid and some good coffee your favorite type of coffee um if it's a heavy thicker ground is better uh espresso won't work too well because it's too fine uh it'll be harder to filter later when you go to filter it basically i have here a 2-liter mason jar and what i'm going to do is i like my iced coffee fairly strong so i'm going to be doing one cup and i'm using this uh this blue mountain coffee gourmet blend you guys can use whatever it is your favorite blend and this is great because it doesn't have the acidity of heating the coffee it's a lot more sweeter the flavor the aroma and it comes out amazing without having to burn or cook the coffee to extract the aroma so it's actually a lot better especially if you've got problems with acid beach bugs or anything like that i know some people get issues from coffee this will be a lot easier on your stomach so basically i'm doing about one cup of ground to my two liter mason jar and i'm going to just fill it with filtered water i'm going to put my lid on it shake it up a little bit and then i'm going to come back in 24 hours and we're going to filter it and we're going to have the perfect cold brew coffee and i'll see you guys in 24 hours okay guys so it's been 24 hours and the coffee has brewed in the cold water as you can see it's actually turned water black i've tried a couple of different methods to filter this um cold i tried the regular coffee filter paper and it just it took way too long and it didn't work out the way i hope so i found this really really fine mesh strainer and it actually gets all the grinds out of the coffee even better than the paper filter and a lot faster so this is what i'm using um you guys can experiment with different strainers and filters and stuff to see what works best for you coffee came out pretty dark as you can see you can also try different types of coffee to see which one you like best i'm going to use just a splash of organic valley heavy whipping cream and this is organic no carrageenan in it is really great tasting stuff use a little splash of that and add a tablespoon of stevia i'm gonna make add some ice to it i transferred my coffee over to another cup now i got the ice in here and i'm just going to pour um the coffee with the cream and stevia over the ice the benefits of a cold brew coffee is basically um that it's a lot less acidic um when you taste it some of the coffee makers overheat the coffee when it's brewing it and it leaves it like an acidic aftertaste with cold brew the coffee is very smooth and you don't get any of that okay guys as usual thank you so much for watching the videos remember to share with your friends and family and subscribe to help us keep growing and i'll see you guys on the next

Please explain how to create spatula iced cake designs | wilton

[MUSIC PLAYING] If you're new to cake decorating, I want to show you some really simple, cool tricks that's totally up the presentation of your cakes and desserts. One of my favorites is called spatula icing. Spatula icing is essentially making indentations on the side of your cake and on the top to create patterns. If you're struggling with icing your cake smooth, this is one of the best ways that you can cover your imperfections. It'll make it look really pretty and rustic-looking. Let's start with a spatula ribbons. You're definitely going to need a turntable for this technique because you're going to be turning it fast to create the ribbons up the side of the cake. I'm starting with a freshly iced cake and the reason is if it crusts over a little bit, you're not going to get as smooth of ribbons. It's best to also make sure your cake is iced pretty thickly because as we do this technique, we're going to be removing a bit of icing and you don't want to have any patches of the cake showing through. I have my turntable all set up with my little nonslip mat, which will help keep the cake from sliding around. I have a bowl here for any excess icing. I can go ahead and just scrape it off there. So the first thing you're going to do is place the spatula at a slight angle. And I'm going to go into the icing, but not all the way down to the base of the cake. And then, I'm going to start turning. In a simultaneous motion, I'm going to slowly spin the turntable while moving the spatula upward. As you're spinning the turntable, try as much as you can to keep going until you reach the top. It's one continuous motion. If you stop, it's going to have a bit of a stop mark, and that's OK too. This cake is meant to look a little bit rustic anyway. So I'm going to stop when I get to the top edge of the cake and smooth down any icing that might be at the top edge. You can just go ahead and sweep those towards the center. To create the spiral effect on the top, I'm just going to place the tip of my angled spatula at a slight angle of the center of the cake. And I am simultaneously spinning the turntable and dragging my spatula through the icing, all the way to the outer edge, just like that. And that's how you do spatula ribbons, and now I'm going to show you how to do vertical lines. You can use a cake plate or a turntable for this technique because all you're going to do is just swipe a vertical line from the base of the cake all the way up the side. I'm going to start out with the tip of the spatula right there at the base of the cake. I'm going to press the icing so that it creates a deep impression without touching the cake underneath. And I'm going to drag the spatula upward, removing any excess icing on the spatula before I start the next line. I'm leaving a very small space between my swipes to keep the look of a ridge. And I'm going to go ahead and just repeat this process until the side is finished. I'm going to show you how to do some diagonal lines really quick. I can turn the turntable as I move around the cake without having to manually turn a plate. So I have a little bit of a rough edge on the top here, and I'm just going to go ahead and smooth that in. And so that's how you do the vertical and the diagonal spatula icing. You can see spatula icing is a super simple technique. You can even finish it off with some sprinkles. This technique can be also used on sheet cakes, cupcakes, brownies, and even cookies. [MUSIC PLAYING]

Please explain how to make beautiful chocolate tulips and to make chocolate mousse to fill them

hi I'm muncher welcome to sharing cooking secrets today I'm going to show you how to make chocolate Philip I'm chocolate bone you will balloon and within a sylvie within sponge and rocket me so for the chocolate tulips I have my chocolate chopped here and this is about 4 cups of chocolate and I'm going to melt this so our chocolate is beautifully melted then no lumps and I just want to cool it down and let it come to room temperature and I've melted the white chocolate in the same way and I've put the white chocolate in him I see that now here I have some balloons so this is going to be a fun video I know you've seen many videos like this but I always find that they're not really explained correctly so I have these balloons and they are the small size balloons and we have blown them up but not using we've not blown them from the mouth but we've used a pump so it's it becomes really hygienic and we've wiped the balloons very well with a wet cloth and dried them so so it becomes much more hygienic and what we're going to do is we're going to dip the balloons into the chocolate so the first design is really easy just hold the balloon from the top and just dip it in and out see I've not dipped it too much it's just a little less than halfway up the balloon to shake off the excess and just place it on up a butter paper now the second one is I'm going to make a tulip with this so listen to me carefully treat the bowl like a clock and see this is 12 o'clock this is 6 o'clock this is 3 o'clock and this is 9 o'clock so first of all we dip the chocolate the balloon into the chocolate and tilt it to 12 o'clock so we create our first petal then tilt it to 6 o'clock and we've created the second petal and then 3 o'clock and 9 o'clock each time you're coming back to the center lift it let it let the chocolate extra chocolate form and just place it on the bottom now the other designs that you can do is by adding some white chocolate so I'm just going to make a hole on this so with the white chocolate I'm just going to pipe some circles and with a toothpick I'm just going to create a feather design starting from the center again following the same pattern 12 6 3 & 9 and then starting from the opposite side all the way stopping in the center take your balloon again hold it from the top dip it in the center and take it to all the 12369 sites lift it shake off the excess then place it on the battlefield you can do the same thing with this disease so I'm going to put these in the freezer for around five to eight minutes now for the filling of our chocolate tulips I'm going to make a chocolate mousse with a little twist so I've got about one cup of whipped cream him here and one cup of truthful so I'm just going to add my truthful to my whipped cream for a very easy mousse so just mix these two together if you want you can add a little bit of coffee powder in this so mousse is ready this will go in a piping bag and we will fill our chocolate tulips so we've got the balloons out of the fridge after eight minutes now all you need to do is get something really sharp like I've got a toothpick and we're just going to bust the balloons so hold it from here tight and burst it [Applause] [Applause] now all you need to do is just pull the balloon away from the chocolate unit very carefully pull it out so far so good great so now you can see they have a little hole at the bottom okay so that's very normal so don't be afraid if that happens just get some melted chocolate and with a brush just fill that hole up so tulips are ready wasn't that so easy and such fun so I've got some chocolate sponge here and I've just cut small rounds out and I'm just gonna place them at the bottom of each of my tulip now you can serve ice cream in these you can serve fruit in these it's your choice what you what you want to do and I have some magma tea biscuits so what I'm going to do I've got some truffle sauce here and for the trooper sauce you can see my previous videos and I'm just going to place this inside material you don't have to do this step you can just put the move you can just put the sponge and after that you can top it with the mousse no that's what made me spill and I'm just gonna cover this up with the mousse

Please explain how to install drywall on a ceiling with resilient channel

hey guys it's Dwight Simpson from Simpson properties and today we're going to be hanging drywall it's not my most favorite job but this guy right here makes it a hell of a lot easier it's $45 a day to rent from Home Depot it is well worth it it's called a dry wall panel lift and this one the manufacturer is panel left bite elbow do it rent it it saves your back it saves your helper look at this right now the sheet is being held on it just makes your life so much and whenever you're putting up your drywall it's important to remember always have it perpendicular to way to the way your rest channel or your joists are okay the first thing you want to do is mark on your drywall where the rest channel is so you're going to put a little tick marking the center of each reginal and when you obviously don't have to mark are you ready Gord then we're using a t-square and marking on the drywall where I rest channel is that way we know where to put the screws all right so now your red channel is hung up and you're ready to hang drywall so you want to use either inch or inch and a quarter drywall screws find thread now it's very critical not to install the screw through the channel and the ceiling joist because if you do that you're defeating the whole purpose of installing the rest channel and you're shorting out the system the whole purpose is the D couple your drywall from the wood structure so when you hang your drywall you want to make sure the drywall screw is just in to the channel and not going through the channel and the ceiling joist because if it's done correctly the only place where you can get vibration transmission is through this screw right here but a lot of that vibration is lost through the zigzags and the slots that are cut in the channel this is another tool that will make your life a lot easier it's designed to put in drywall screws and you can set the depth once you get it right and the correct depth is you want your drywall screw to be flush with the paper so shouldn't be recessed then obviously shouldn't be sticking out but it should be flush and because if you go in too far then what can happen is there's not too much for the tape or sort of the drywall itself to hold on to and you'll end up getting cracks in your ceiling so just have the drywall screw flush Oh okay you it helps if you make a rough sketch prior to installing the drywall of any HVAC vent spotlights device boxes or access panel areas with reference measurements off of two walls if any device is hanging below the rest channel or ceiling joist don't fasten the screws too close to this area until the opening has been cut or else you can damage a drywall you can use a drywall saw or cutout tool to make any openings cut the inside of the device opening first then you can make a clean pass around the outside edge for a clean cut the brand of credit tool used in this video is wrote as it I would not recommend using this brand I went through two of these tools on this job alone from burnt out motors I upgraded to dwelt and it performs much better and in order to drop the lift all you have to do is break handle just push it up that releases it and keep your other hand firmly on this wheel or else a little let go when it comes to mudding and taping a large area like this I sub the work out mudding and taping is an art and if you don't do it every day it could be very time-consuming and leave a poor finish I use lis drywall Norbit and his team do excellent work and are very reliable if you live in Barrie Tron or the GTA highly recommend checking these guys out at lis drywall CA I'll link to their site can be found in the description below thanks for watching guys I hope you enjoyed the video if you did hit the like button and to stay connected subscribe to my channel you can also follow me on Instagram

Please explain how to apply sticky back plastic to a worktop

your kitchen worktop is subject to humidity damp and heat on a daily basis from hot pans and dinner plates to coffee cups and utensils all of which can cause scratches marks and other visible damage a tired worktop can make your entire kitchen look shabby but the cost of replacing it can be high in this video we are going to renovate an old kitchen worktop using this model light DC fix self-adhesive film to give it a fresh contemporary new look without the massive price tag before you start you'll need a DC fixed application kit including a smoother and a scalpel sharp scissors a pencil for marking up a measuring tape and a clean cloth or duster prep the worktop by ensuring it's clean dry and free from dust and grease start by cutting your film to size using the grid on the backing paper as a guide mark with a pencil to ensure you leave enough excess to fold over the edges of the worktop remove a corner of the backing paper to expose the vinyl then apply to the worktop peeling off the backing paper as you go and pressing down on the film with your smoother if you have an air bubble in your vinyl simply pull it back and reapply or push the bubble to the edge with your smoother alternatively use a pin to prick a hole in the film and release the air when applying to curved surfaces use a hairdryer on a cooler setting to soften the film this will allow you to mold it easily around the worktop edge avoid pulling too hard if this can over stretch the film if you find your sheet is crooked simply remove it from your work top and start again your DC fix film can be shaped to fit around your sink be sure to use sealant around the edges to prevent water ingress and damage to your film once applied leave to bond for 24 hours and your work top is ready to use your DC fix is heat resistant up to 75 degrees we don't recommend putting hot pans directly onto the surface and spills can easily be wiped away using a damp cloth if your film frequently gets wet or damp use a sealant around the edges for extra protection so hopefully that shown you just how easy it is to use DC fix to bring life back into your kitchen worktops

Please explain how to preserve for the winter

hi it's ed hackman green talk and we're talking about salad today um it is right after frost a couple about a week after frost and i harvest my celery uh p.s wait till after frost i find that the celery tastes a lot better after a hard frost and i've stripped the um all the leaves away because i use them as well and they're sitting in water because it's i had quite a bit of a celery i had probably about five or six plants and they were quite big but here's the thing the celery that i grow is very skinny i got to change my seeds but this is the ones that i use it's very skinny so what i do is i preserve a lot for the winter for soups for stir fries for anything and i freeze um this celery and i'm chopping it up in my food processor because it's so skinny it's really hard to chop up into slices you can do it by hand but like i had a whole two bowls like two of these containers of celery that would take me forever so what i do is i chop it up into four to five inch pieces this one's a little big put it in the food processor you don't want to put in a lot because you want to watch it and then i it grinds up and it looks like this otherwise if you put too much in a couple of the pieces won't grind or you'll get celery mush which is if you don't mind that that's fine and then i take about uh two to four cups and i don't remember how many cups i do it's it's individual i have a big family so i might do four cups of celery and i use um freezer bags um not freezer bags i use um the vacuum sealers to seal the celery now you can use the vacuum sealers for um small glass bottles as well if you want to you know avoid the plastic my refrigerator is getting way too full so i don't think i'm gonna have room to put a glass in but you could also do them in small containers as well and i take it out when i need it every time a recipe calls for celery i go oops i got it it's already cut up and i take it out and i use it it tastes just the same as fresh once you stick it in the freezer and um you know it's just delicious because it's homegrown this is anna hackman green talk i want to know how you harvest your celery if you harvest celery and how do you preserve it now just a fyi even though you may not grow your own celery in the farmer's markets there's probably a ton of it right now and so grab some you know buy some now and go ahead and preserve it so you can have it for uh your stir-fries and your soups and things that require celery to be cut up so this is anna hackman green talk thank you so much for watching share my video and i'll see you in the next one

Please explain how to cure dust allergy permanently

and we're down welcome Charlie here and I want to talk to Danny about how to cure dust allergies permanently this is what I've done and this is what I help people do but yet it still interests me why every time I go into Google and click how to cure dust mites or something like this there's no information about actually how to get rid of dust mite allergies everything everyone's saying is simply how to reduce the dust in the environment and therefore improve your allergies because there's no dust in your environment but you can never get rid of dust totally it's impossible so this actually doesn't fundamentally change anything because you can't control your environments all the time so this isn't addressing why you're reacting to dust or dust mites and why another person alongside you may have no reaction whatsoever this is what I'm going to address because this is what this is where we get to the root cause once we can find the root cause then we can change that and therefore you there will be no immune response to something like a dust when there shouldn't be an immune response to dust if your body is in balance functioning well and your immune system is switched on in the exact right way there should be no immune response to dust mites yet if you have dust allergies this is suggesting that there is an immune response so my story quickly I had dust allergies for I was very sick for about five or six years I was sleeping twelve our night sleeping throughout the day I always had a clogged nose and clogged sinuses I couldn't breathe properly I was sneezing my eyes were watering everything was just boom and it was really frustrating it was frustrating socially I didn't feel like I could be my full self my full expression it was hard on my energy levels it was hard on me feeling good about myself because I was actually just feeling suppressed tired weak and I thought it was unfair why I had it in someone else didn't and I really had no knowledge about why it was happening to me I was even going to the doctor and getting allergy shots so they were injecting me with a little bit of dust allergy a little bit of dust feces or dust mite feces in order to improve my allergy reactions by hopefully increasing my immune system but this didn't work every time I'd go there I went there for three months every week or every two weeks and they'd bring out the vial they put it into me and my throat would close over I'd start wheezing it really wasn't a beneficial experience and after three months I intuitively said this is not for me and so I turned my back and I said I'm going to find out how to get rid of my dust allergies no matter what and I searched for four years and I tried so many different things some things worked and others didn't but I kept going and going and going and what I'm gonna actually share in this video is about a few of the things to look at and observe in your own life to then recreate recorrect your immune system rebalance your immune system have it come into harmony so it's actually going to the root cause you're flipping it you're creating something new within the immune system balancing the immune system and therefore your dust allergies can disappear just like that so I want you to stop giving your power away to the external world to other people and actually realize that the reason why you have dust allergies is because your immune system is reacting when it should not react it's as simple as that find out why your immune system is reacting change that and your dust allergies disappear so let's just touch on why your immune system is reacting okay so there's a resistance you are resisting something internally or externally that causes your immune system to switch on when it shouldn't it's like your immune systems fighting it's fighting either something internally or fighting something externally and then the dust mites get lumped into that external fight and the immune system switches on fight or flight we have to fight the dust allergies we have to fight the dust mites we have to fight the dust and this doesn't help at all so there's something within or outside that is there's a resistance that we really want to identify and then change so some things that could be causing this resistance now this is a holistic approach and unfortunately there's no other way you think that you can take a magic potion you think you can take some pill you know if you take a antihistamine or suppress the immune systems natural response then this is just going to cause some other issue down the track and something else is going to start so it's actually about finding out how to change the immune response how to balance the immune system so this is a holistic approach and as I just said there's no other way around you need to come in from all angles find out what's lacking what's out of balance and then change it the immune system settles down relaxes and then there's harmony within and then harmony outside as well so one of the things you want to look at and just a just a side comment if you want a journey deeper I've actually made a online program with two and a half hours of video footage specifically on dust allergies how I got rid of mine and how I helped others but here I'm going to be touching on some really key crucial points and I'll put a link below to the online program I often run big discounts on it so you can often grab it for you know less than $25 and it's a whole online program very valuable if you are really serious about getting rid of your dust allergies so briefly what are some things you can do right now so let's talk about food now whenever you have something internally there is a response in the body and either the body accepts it and absorbs it or there's an immune response and it reacts and this is food allergies but even if you don't have specific food allergies you don't know of them your body and immune system could be switching on when it shouldn't and one thing you could do is take a test called the IgG test and this tests for immune response to certain foods and it goes through normally than most 96 most common foods and there'll be at least three or four that really stand out and that your body is probably reacting to remove them out of your diet and this will greatly assist your immune system to relax to rebalance to recalibrate see if you're trying to rebalance your immune system yet you're eating some foods every single day sometimes every meal where your immune system is reacting reacting reacting it never has a chance to relax to recalibrate so finding out what foods you're allergic to through the IgG test is very important another area that you could look into and I highly recommend you do is your thoughts so if you're watching this and you're very much about physical reality about I just want to fix it with changing something I eat having a pill sleeping more unfortunately that's not going to work your thoughts are extremely real they're actions within the body they're energy that you're sending out constantly and us as humans our natural vibration or our natural way of being is positive loving thoughts this could be joy this could be relaxation this could be peace this could be love positive thoughts yet most of us 95% of the time are probably thinking negative thoughts so if you start to observe your thought pattern and you see that you're creating a lot of negative thoughts whether that's past events jealousy anger these other things whether it's past relationships or current relationships current friendships so there's certain people that you've got negative views on negative thought patterns this creates a lot of disharmony in the body for example if you have someone that you really dislike and you're constantly thinking negative or even just every day you've got 10 thoughts about them negative every negative thought activates your immune system it's a fight or flight if I'm like I hate that person within the body the body believes the cells believe that you're going to fight this person going to wall with this person so fight-or-flight switches on the immune system switches on so this is vitally important if you're trying to relax and calm the nervous system and the immune system you can't do it if you're constantly got negative thoughts towards other people past situations your current events such as finances now there's amazing ways to redirect your thought patterns and I'm not going to go into it right here because it takes a long time it can take you know some time to to show someone how to do it and then guide them through that but it's very important that you become aware of your thoughts and if you've got a letting a lot of negative thoughts then yes it's not surprising that you're experiencing dust allergies it might be hard for you to see the link but let me tell you it's very real and it is affecting you on a level of the immune system and if you want to have your dust allergies gone permanently then this is something that you can't ignore then there's another one and that's specifically the lymphatic system so the lymphatic system I'm going to briefly touch on this because I know this videos gone for quite a long time the lymphatic system is vitally important system you're about 70% fluid in the body ok you're we're mainly fifty to a hundred trillion cells and then we're just fluid and there's two main fluids blood and lymph fluid blood is about 25% of our fluid lymph is 75% of our fluid most of the medical industry concentrates on blood yet 75% of our fluid is lymph fluid so understanding the lymphatic system and how that could be affecting your health and more specifically your dust allergies extremely important so the lymphatic system is like so the feeds the 50 to 100 trillion cells in the body feeds at oxygen and nutrition the lymphatic system takes the waste away from every single cell in the body so it's like the sewage system the blood has a heart to pump it round lymphatic system does not so it can get very stagnant it can get very swampy it can get backed up and the lymphatic system and the immune system are like this so if your lymphatic system is clogged and the fluids are like swampy dirty not moving not flowing the immune system can't respond properly it can't do its job properly it can't remove the waste from the cells properly so it's going to react a lot more because it's just going to be overburdened it's like whoa whoa whoa there's all this stuff going on dust whoa and if that's happening then you're going to be reacting to dust mites potentially more allergies and get the immune get the immune system rebalanced by re correcting the lymphatic system this will do wonders ways to correct in brief you can alkalis the system you can have hydrating and astringent foods to move the lymphatic system to pull the lymphatic system in my online program I go into it very deeply how to start moving the lymphatic system as well as another four probably five different sections on different things that I haven't even mentioned in this one this video can give you a really good head start it should enable you to get a view and feel empowered around your dust allergies that you can actually change them I did I help others do and I've seen the results so you can do it too but if you just interested in a quick fix if you're interested in just taking a pill and having a gone I'm sorry to tell you that probably isn't gonna work and this video is about how to have your dust allergies disappear for good disappear permanently so that's what I'm interested in that's what gets me excited and if you've liked this video share it if you know anyone with dust allergies let them know also jump over to my online program because there's going to be and there is heaps of valuable information there so I hope this thing this your time has been worthwhile thank you to being with me subscribe for more videos and health well-being I'm making this video all the way from Holly

Please explain how to paint a tamiya plastic hard body - part 2 primer & mica red

hello again everyone Steve here from RC tanks and trucks 24/7 now up to part two for how to paint to me a hardbody now like I said in step one I encourage you to wash them thoroughly make sure they're dry before you start this important stage here's my primer I'm using like I said it's just a Tamiya surface primer good for metal and plastics but just double check before you buy something else that it's suitable for the substrate you're painting on okay so I'm painting outdoor C so ventilation shouldn't be a problem but if you are painting indoors please make sure all your windows are open and you wear some type of respiratory system or a mask or something like that because these fumes sometimes do stink okay so when you pay the model don't begin on the model and we'll just finish like that kind of start away and finish at the end so before and after the model etc so let's get cracking okay now there we have it all parts are thoroughly coded double check before you finish up that everything's nicely spread evenly and there's no undercoat showing oh sorry the original color showing and that's it so I'll let this Journal show inside okay guys Steve here again now I've let the primer dry which is ease now and it's going to go over and have a look how it actually all went on any imperfections you can always sand out but generally it came it went on very well now what I do is I generally get like a white just the basics a paper towel and I'll just rub over the body before I want to paint the top coat because as you can see a little bit of that's like a dust will form over from the actual spraying of the primer as you can see they're just just just to find fine mist tata sky with the whole model and just wipe the whole thing down doesn't take long but like I said the more time you spend preparing the base throw the primer the better the actual end result will book so a bit of patience always pays that when you're fishermen painting so I'll go ahead finish doing this see if I find any imperfections and I'll go outside paid the actual Mickey red color and I'll show how it looks okay guys now as you can see this bad boys Oak Point paint it up in mica red doing that very well it's got a paintig localized like a metallic flicker in it it looks really nice in person and the lights in the room to stand two adjusters but pretty happy touts turned out there's some little parts I need to fix up here in there which is normal but overall very very nice and happy with the actual color itself but in the sunlight it it looks really nice very happy and yeah so then in the next video I will be doing a lot of the final detail parts painting the black parts the chrome stickers door handles and all that stuff the interior as well so stay tuned guys thanks for watching preciate your support and see you soon

Please explain how to make a grocery bag holder

hey guys welcome back to my channel I hope you enjoy this video ok switch you're gonna need is a piece of material anytime you want by I did 17 by 36 so I runs a home or car make smaller you can make any size you want you're going to need extra scraps and your time so around them for your flowers this is what a look like and they different color is different material you're going to make some elastic any time just a little few inches and any kind of ribbon just another few inches you're also going to need a needle to Hansol the flowers and a pin to put some elastic to get through the material okay you're going to leave your needle and thread and you're going to make about half an inch stitches near the bottom and while you're doing after you make a few just pull the thread as tight as possible so it gathers and just continue doing once you do that you need to tie off the two ends together and stitch them and ribbon if you want or a button either one or nine I'd admire you purple ribbon just stitched it in there and near the bottom now you just going to sew up the side all the way once you fold it up you're going to go ahead and cut off all the extra material now I'm going to sing Macbeth out you're going to go ahead and add your elastic and go back through I had issues with mine and I went through closer to the tension so once I get back out you're going to go ahead and suck the ends of the elastic and cross the extra I'll let that son you're going to go ahead and do the same thing with your ribbon except you're going to hand stitch it my resents to some 20 magazine now you're going to go into Gallup flower if you want I can make up my mind once you do that you're going to go ahead and hand stitching on this could also be easier if you do it before you sew it together which I can't decide which one to do it so you can also do that to make it easier to sew your flower on before you close it up you

Please explain how to seam carpet /www.directcarpet.ca /keith shannon

alright what we're going to do now is show you how to cut pattern carpet properly to seem it he's good blade now this is already cut and ready to go what I'm going to do is I'm going to recut it just to show up in the video how it's done you now the reason that works so well like that because the sewing pattern on this carpet is sewn in a straight line or most of the time it's old is your line so we just do that and then we match it up to the other piece now watch is how we're going to match it up with powdered carpet pull it over line the squares up with the often sides of the square there we go now we're going to see my carpet our iron is hot and ready to go you can rent these at any rental place within your city if you're not a professional you need the tools get our tape hot slowly move it down the whole length of the iron look at and make sure your patterns right patterns right this tool that i'm using here is a tractor just kind of pushes the fibers down into each other if you want to get a little closer here drawer over top of the seam you can see that the patterns lined up perfectly and we have an invisible scene and then we just keep going down and keep doing the same thing move it down again the length of the iron split the pile a little bit make sure you your pattern is lined up get your tractor in there push it down into the gloop it's that simple we are the research experts check us out of research calm and turn off

Please explain how to make streusel coffee cake

oh I'm feel it's pretty good cooking I look like a slug pillow just spilled a drink on my shirt I'm not really much of a baker but as part of our initiative to grow together that's like a business hand signal you know like with the Trump hand signals and like business hand signals when people talk with their hands they do some of these and some of these some of these if you ever say the word together you do this to signal an exchange or dicks to signal that you got big boobies I'm gonna make a streusel coffee cake in the bun fan an actual cake a bundt cake in the bundt pan which the generous patreon supporters procured for me and yourself so you can learn how to use one begin by preheating your oven to the most holy of temperatures 30 stands for 5 foot but I don't know I was going with that one all right baking involves measuring things and putting a lot of things in various sized bowls and that's how you cook I mean big like I said I'm not very good at baking this is a cup of butter oh yeah I need to do other things first apparently so let's get our flour mixture because I don't really think a lot i bought like all new ingredients for this recipe I had no idea how old all my other stuff was let's go of being wasteful no matter what you do if you open a new pack of flour you're gonna get some money we need four cups this a frog we're gonna use them as a cup that's one who this just all purpose flour by the way I was going to simplify forgot good thing we got that thing alright do this we need 2 teaspoons of baking soda and 2 teaspoons of baking powder I think that's nice as a recipe goes because a lot of people confuse the two but this way you just use both so you can't get up yeah this is idiot proof but will it be Phil proof this box is Phil proof all right one and do this one's got that left leg thing and level it is designed for your benefit and ease of use wow I already making a mess here like you do all right you need to mix that up you can use a whisk or a spoon or what ever gears mix it up that's good enough for me alright breastfeed I'm loosely following says use a cup of walnuts it's like a cup and a half more okay yeah yeah you want a half cup of sugar half cup frog LP and you need some cinnamon need 2 teaspoons of cinnamon release your cap to me this is the disadvantage of having a big purple spoon you can't scoop it out but it all looks good and it's mix it on up there you should probably get like more chopped up walnuts I didn't really think about it gonna be some big honking won't hunt to this get that out of the way through alright now we're going to cream some butter and sugar together to do so it's best if your butter has been sitting out for a while to stop them all right as the saying goes ain't nobody got time for that I'm gonna briefly microwave them let's try 20 seconds well we'll try it that's with an O War case your dudes push on it that's pretty soft yeah that's good put it in your mixing fixer nice to this we shall add two cups of sugar that's a little bit more than your daily recommended intake going to start creaming it startled OH oh that's going to take forever you can see cuz i did like the buttermilk it's just kind of stick in there so that sucks alright we're going to do when your calls on the flight troubleshooting I'm gonna use a spatula to push it off this thing maybe if you chop up your butter this will go better let's try it again I bet you it just does the same thing um let's just let it go let's just treat it like a problem and just let it go breathe in shut it clearly knows first breathe out I think it's kind of working it looks different I mentioned I'm not much of a baker let's just let that roll no that's not a little boy you know if you're vegan you can't eat this stocks for you let's try it burying the butter and sugar let's see if that fixes I said I mean if I just turn the mixer up all right here we go yeah it's it's doing a thing look at that now we're bacon what are we doing next it's supposed to get creamy maybe the butter is too cold turn it up you can't return maximum speed I've never used to maximum speed this is cool oh there we go now it's screaming up physics all right check it out it's perfect it's so creepy but the camera let's just let's just roll with it we're about to put some liquid e things in there Jim let's gotta fix this right up all right gonna get us oh [ __ ] moving here we had four eggs you might be wondering if we should feed him beforehand well I don't know should you I'm not gonna there's an egg because this mixer is fairly small it's hard to crack things right into it but I'm just gonna do it anyways I'm buddy getting shells in there like we're making a fine omelet all right let's pause pause for a second here and see if we can't fix what we've done so far I just want to say that this is we're learning together I can go so you can save face friends let's uh let's just hold that for a second we need two cups of sour cream let's see if we can't get it from one place to the other if it looks like two cups that I'm just gonna yeah that's good it's Dooku cops isn't it yeah no problem a little mess there making difficult there's so many steps oh yeah vanilla vanilla this is special vanilla you can use extract a real vanilla this is Bourbon even illa the corny made and it's just bourbon with vanilla soaked in it but it tastes real nice two teaspoons of that boy I hope this turns into something what bread likes you o cake like I guess all right oh yeah look at that it's that's way better gotta push the stuff down the sides if it was stuck there it's like vibrating with like a guitar power cord all right now we had the flower gonna be a close one I mean basically worst case i'll just [ __ ] mix it by hand but no i don't yeah that's like part of it we're gonna mix it yeah we're gonna keep banding it yeah no problem Oh some problems again when it starts getting stuck like that push it down be careful that looks pretty good to me I brought you to use like a bread hooker mixing paddle instead of this leader it was like totally the wrong attachment all right I have the right attachment yeah use a paddle not this thing I hope you dumb all right it looks pretty good right now you you need to grease and flour your bun pan sounds kind of like a pain in the butt to me that's why but Baker's joy it's got flour in it convenience oh it looks weird mmm smell nice now you take your batter a mad about it and you want to put half of it into the pan if you're not an idiot you might use a different tool but if you're me you will just use baking hard like sour cream everywhere use your tool to spread it out around the hole and down the bowl that's poopin yep buy with it okay we got our net mixture get one of these weird modern spoons from foreign lands and just use about half of it here as kind of such going out gonna be done it just like that crazy professor only 90s kids will know take the rest of your veteran in there this step might be difficult I was right and we should like change the PGC motto even though I don't think we have an official motto it should just feel like every day's a struggle but really I'm having a wonderful time the joy of baking that's a book think hey boy there was like a spoon like ten pontipines use what the [ __ ] ever get that last little bit off the spanish book alright and press down you might consider using your hands I'm not doing it but you can think about it I think this is gonna be lovely hopefully it doesn't burn maybe we should do a video on cinnamon sugar toast it's a hard one my new instructional video on that one I recommended pressing down in there you know the old vigorous spooning you know like your average Friday night all right Alex it looks good oh hopefully it doesn't explode out of here that is supposed to take 45 minutes to 60 minutes until a toothpick can be inserted and removed with no schmutz on a toothpick the top so i will let you know how it goes i should set a timer let's check it 45 yuck be right back I gotta clean up this mess it's done it's been 45 minutes as you can see we over feel my pain but goddamn it looks good still seem soft they're trying to keep cooking it you see it it's wet there when you press on it though I can't find my tooth picks up i use a fork that's pretty crunchy but yeah that's not done you can see it's not done at all I like Oh another 15 minutes we'll see it over back in 15 minutes all right let's pull pretty crazy looking maybe a little wet but as it cools down I think it'll finish trying there's gonna be very brave dog no you're gonna be brave and just dump it out now you know fun oh [ __ ] I got it I got everything let's let that cool for a long time we'll be back god I hope that comes out alright we've been letting it cool and a half an hour so structural integrity is questionable I'm gonna try to flip it you can see its kind of falling apart it's okay let's there's a cut into it well this is just falling apart that looks pretty done not really able to cut it into slices but who really cares belt that let's take a big hunk it's got a gig not pretty cake you can see how i'm feeling was there in the middle fork nice quick alright i guess it was worth it maybe cook it longer at Lauren really fun the outsides a little crunchy but still good it's good how many yummy yummy well thank you all right today was a relative success for me I taste good yeah I guess that's how you doing we learned something new today this is the end of the show song and something that rhymes with today such as I will now say goodbye by travelpod

Please explain how to make crab apple jelly (jam) 3

hello it's nancy today i'm making crabapple jelly now first you take the crabapples you pick them from the tree and you wash them then you boil them and you don't have to take all the stems and the insides out because you're going to press them or you can put them in a bag and let them you can put them in a colander like this and or and then you can use the pulp that's what i do i use the pulp you see here's some with the pulp in it and then you boil it with equal amounts of sugar and when it gets to the jelly stage takes quite a while you're boiling away all the water in it until it's gets to the right temperature and when your two drops join together and become one big drop and slide off the whole thing should shear off and you can also put some in a bowl and test it see and as it cools it should get like jelly or jam see it is getting like that so this is your i like to see it make two drops that join and then the whole thing slides off the side so here it comes see that the whole thing is going to drip off and see how the spoon is all gelled now so that's ready so then what you do is you take your lids which you've been boiling for five minutes and you pour the water out then you can put it on beside all of your jars which are ready you take this off the burner then you probably should use a plate and put the plate there and you put and then you get a cup and you dip it out and you very carefully pour it in it'd be better not to get any drips on the edge of the jar but if you do you're going to wipe them off anyway and for jam or jelly that you're not going to put where it's going to freeze i would fill it right up to the very top okay and then you take a clean cloth and you wet the cloth and then hope you can see this and then you wipe around the edge so you need your whole edge to be perfectly clean okay then you take one of your sterile jar lids you have to make sure that it's completely clean okay and then you take one of your newly boiled jar lids and you put it on and then you put it as tightly as you can manage there you are and then you've got jam now that is gonna the lid will pop down and it'll seal and that is crabapple jelly or jam okay that's nancy today you can do this at home crab apples are edible they don't you don't fill up on them unless you've made jam at them though because they're so sour

Please explain how to remove ink & crayon stains with carbona stain devil

My husband always talks with his hands and ends up marking on himself. -Have you tried using a stain remover? -Too complicated! Well let's try Carbona's Stain Devil #3 for Ink and Crayon. Watch closely First, she started by sticking a towel over a plate. She's going to just tap the stain out and the towel is going to absorb the stain as she taps. The plate keeps the stained area soaked. Then, grab another towel to tap with. Why tap? Isn't it easier to rub? Julia, never rub a stain! It makes it harder to get out. Oops, I'm guilty of that. Well now you know. As she taps, here's another tip: Did you know that there are 9 Stain Devils specially formulated to remove 120 different stains? Wow! This will make my life so much easier! By the way, this is Stain Devil #3 for Ink and Crayon. Julia, does your husband sometimes spill beer or brandy? Yeah Well this one also works on beer, brandy, markers, highlighters and pens. This stain remover is perfect for my husband. I don't have to buy him a new shirt. Carbona: "Because there's more to life than cleaning"

Please explain how to cover a cake in buttercream and get a fondant-like f

hey everyone it's Mary Beth and I just wanted to come back and finish this cake off that we've been working on and we've already cut it and prepared it for decorating and then we put the crumb coat on and while we were away I frosted the cake with icing using the same kind of technique that we used for putting it on with the crumb coat and I just wanted to show you how to smooth it out now basically I put like with the crumb coat but I put it in the fridge like two more times so we get like two layers of the coating where you make it nice and smooth put in the fridge let it set that's the speed that's the fast way to do it or you can leave it out on the counter and until it becomes so like if you touch it it doesn't stick to your fingers and then you just keep putting layers on and smoothing them out and now this is the final layer and so you go around the cake which I've actually already done but for you but I'm gonna show you in this little area here how to do it so you're just gonna go around and smooth it on you can see you just push with a lot of pressure there and smooth it it's just a pushing and a smoothing and you know you just really need one of these kind of little spatulas in order to do it this is very key to getting your cake smooth I really do not recommend trying to improvise on the spatula part of the video here because it's a very important tool you don't always need there were all the right tools I've improvised plenty of times believe me but this particular tool is just very important time as soon as I finally got one of these that's when I finally learned how to really decorate a cake I mean just having the tools made all the difference so you can see on the bottom it's getting a little bumpy so we want to take a little bit of icing and just spread that around on the bottom okay now this time this last time we're not gonna put it in the fridge we're just going to keep it out and we've got some on top to put on and just the last layer on top and if I have any that's like sticking off the edges or like a bumpy edge I just pull it in towards the center so you pull it in towards the center if it's bumpy on the edges see like there's a little bumpiness going on here so you just know right go going the edge and then pull it in towards the center okay and now you know I try to make this as smooth as possible you just want to move it and press it and smooth it okay now the trick to getting it actually super smooth where it looks like fondant is using a glass of water no matter works the best although I have you know if it cools down you don't need to panic it usually works the same and then you just sort of work with it like almost like you're working with clay or cement and you just run your spatula over that just smoothing it and making it look nice it will look nice and clean a smooth line see my setup don't panic it's ok is fixable mm just keep doing the same thing and so that little bump I made we're gonna smooth that out I'm sorry for the bad lighting and everything it's not a videographer here I'm learning at the same time as I'm teaching ok so then on the top you do the same thing you just go around and go around the edge first and then keep pulling in if it's if there's any that's like sticking up and just go over now this is a small spatula a lot of times when you use the spatulas like this part will sometimes scrape the top you just want to go over that but there are bigger spatulas and there's also the spatulas that come down and are angled which I prefer but this is a small cake and this is my smaller spatula and so I don't think it's gonna be a problem as you can see it's working nicely just gonna even that out a nice smooth cake that looks like fondant is covering it but it's really buttercream and it will taste so much better and I'm actually gonna show you now this at this point you could put now you can see some crumbs and stuff on there if I was selling a cake or you know making it to put out at a party or something I would probably put some more frosting on that just to cover it and just do the same thing put another layer for icing you know and then cover that up and then smooth over it with some water to make it smooth again sound like that I mean it's just whatever you're looking to do but a lot of times we're gonna be covering putting some kind of design on it or covering it with fondant or putting some fondant decorations or something like that on it so I don't but anyway I'm gonna actually tomorrow I'm going to show you how to cover a circular cake with fondant but and you can do anything you want with this and it's just up to you you know if there's little pieces of crumbs or something else you don't like then you can full liberty to fix it or leave it or whatever you want to do but this is exactly how you can get it nice and smooth it comes out great and it tastes great and nobody's peeling anything off of your cake so if you have any questions just comment on this video and I'll be happy to help you until then look forward to seeing the video on how to cover a round cake with fondant if you need to sometimes you can only get the look with fondant and you have to cover the cake but I really prefer to use this method and it tastes great it looks great and people are always just really excited that it's buttercream and not fondant so I hope it's helpful thanks

Please explain how to replace wiper blades 04-13 nissan titan

brought to you by 1a auto calm your source for quality replacement parts and the best service on the Internet hi I've gone from 1 a.m. I hope this how-to video helps you out and the next time you need a part for your vehicle think of 1a auto calm thanks in this video we're going to show you how to replace a wiper blade on this 2004 Nissan Titan and we show you on the driver's side but the passenger side is the same procedure lift up your wiper arm and then push this tab right here and slide your wiper blade down then take your new wiper blade and just slide it up and on to that hook and then put your arm back down and you're all set we hope this video helps you out brought to you by 1a auto calm your source for quality replacement parts and the best service on the internet please feel free to call us toll free at 888.259.3826

Please explain how to install your line on a echo trimmer srm 225 fast and easy

hello youtubers i want to just make a quick video on how to change the wire line on your trimmer this is an echo srm two and i like these because you can change them out real quick real uh real easy to handle and uh they last a long time so i'm gonna i'm gonna do this uh this video for those people that are probably just starting out or bought one of these and have a hard time uh changing their wire line so if you can in case you run out in case you run out of wire these are i like these because these are real simple these are real easy to put the wire back on there so let's say that you do run out of wire well you got to do there's a there's a little notch right there that you can just put the wire through there put the wire through there you'll see it right there it's kind of like a little like a little arrow right there if you if you put your arrow right there to that hole right there and you just push in the wire it'll go through easy on the other side so make sure you put it even and all you do is just turn it turn it counterclockwise and there you have it real easy real simple all you got to do is make sure that you line up this arrow right here with this hole right there [Applause] push in the new string line even it up on both ends and just turn it counterclockwise and you'll have it in there thank you guys for watching

Please explain how to fold origami tulip, flower (easy) - spring crafts & wedding bouquet

to make the traditional lily you will need two square sheets of paper i am using six inch squares and i'm using a green one for the stem and a orange one for the tulip so we're going to start with the green sheet of paper color side facing down and we're going to fold the square sheet of paper in half diagonally like this open it up and then fold this bottom side to the center crease over here like this then you want to repeat the same thing on the left side rotate the unit 180 degrees and then fold the left side over here to the vertical center crease like this now go ahead and repeat the same thing on the right side then you want to fold this flap in half again and repeat on the other side after that you want to fold the entire unit in half upwards like this then you're going to fold it in half lengthwise like this and once you've done that you notice that there are two points on the top the one on the right is going to be where you're going to put the tulip and the one on the left is going to be the leaf so from the side it should look like this to make the leaf all you have to do is pull down like this to wherever you want the leaf to be so i want it to be around here and once i figure out how long i want the leaf to be i just pinch on the right so pinch down like this and then i have an origami leaf and stem and i can use a pencil to curl the leaf but for tutorial purposes i'm just going to use my finger so there you go we have a leaf and this should stand on its own like that so i'm going to put that aside for a second and now i'm going to work on the actual tulip to make the tulip you fold a square sheet of paper in half diagonally just as you did for the leaf unfold and repeat the same thing on the other side unfold and then fold the square sheet of paper in half like this unfold and repeat the same thing on the other side like that so now what you want to do is you want to fold along this crease and this crease like this flatten it from the sides and then you should have a square protruding from the side once you have that square all you have to do is squish down with your other hand to create this triangle shape so from the bottom it should look like this and from the side like this next what you want to do is you want to fold this flap upwards along the vertical crease like this and repeat the same thing on the left side once you've done that turn the entire unit around and repeat on the other side then what we're going to do is we're going to fold this flap over so this right flap over here over turn around and fold the top right flap over to the left side and what this does is that it reverses these flaps over here and so we're using the side where there is just a plain surface so not this side where we have the flaps but the side where we have the plane surface and once we have this side that has the plain surface we're going to fold in this manner like this so when we do this fold we want to go a little bit past the center point so we don't want to fold it directly in half we want to go a little past the center point like this so notice how it doesn't meet at the center crease but it goes a little bit past it then we want to go ahead and repeat the same thing on the left side again we want to go a little bit past the center crease so not directly on it crease it in and repeat the same thing on the other side and from the side it should look like this and from the top it should look like this now what we want to do is we want to take these flaps and we're going to insert the right flap into the slot of the left flap so there's a slot here and here's a flap i'm going to stick it in there like that and then flatten and so from the bottom it should look like this and then we're to turn it around and do the same thing on the other side so insert this right flap into the slot of the left flap and lock it in so now what we want to do is we want to hold on to these two flaps that we created one on the right stick our thumb in there and one on the left we want to hold on to it and we want to pull outward now you notice that there is a hole in the middle and what you want to do is you want to put air into this hole to inflate the tulip so i'm going to do that now okay so once you have air inflated um it should look like this and it should look like this on the top and then you notice that there are four petals over here and all you have to do is curl these petals down there's one here's two here's three and here's the fourth one now you can use a pencil um just as you did with the leaf to curl these flaps but again to speed things up a little i'm just going to use my finger and then there for this stem over here all you have to do is insert it into the hole of the tulip and you are completely done so that is how you make the traditional origami tulip it's um fairly easy to make and yeah i hope you have fun with it thank you so much for watching this tutorial please like comment and subscribe and also check out my other free tutorials at the end of this video as well happy folding you

Please explain how to train any dog the basics

This one's particularly interesting though because we have tons of big hyper dogs now as you know I love working with hyper dogs But trying to convey to people that a hyper dog is a smart dog is sometimes challenging That's my goal in this class. It looks like a Boxer Pit mix, so we're thinking We're gonna teach our dogs to have a look at us by using a hand signal. Dogs are heavily responsive to exaggerated body language so in the beginning it might look something like look at me, like this, really really exaggerating We have a nice tight training problem close eye to eye now. I don't know biscuit too. Well and if you were me you would be a little cautious about going eye to eye with a dog like this that you didn't know, and Is he good with strangers, coming into his area? "He is." "Okay very good look at me. Yes very good this work right here eye to eye I'm gonna hold up the treat Look at me and since I like what he's doing I'm gonna click because I like that remember the click means "Good dog, I like what you did, you win a prize." Look at me And I'm taking my time getting them to treat, as long as you mark that Behavior with the clicker, to let them know you like it or yes If you're not using the clicker, Then you can take your time getting the treat to them. The click marks the behavior not the treat. Most frustrating thing when working with a hyper dog is that they're so quick it is on us to speed up to keep up with them we've got to be able to nail the behavior with a clicker the Instant they do it right so in this case look at me right there. I mean as I was saying it. I had eye contact Right here look at me very engaging you got to keep the rhythm up You got to keep the pace, you're gonna have to make sure the moment he does something right, you're there He's a fast-paced train, a dog like this, so you can't be too slow within the next five minutes every dog in here should be able to Leave turkey alone when we put it in front of them We're going to them how to do it, without force, without pulling them away in any way I'm gonna drop it on the ground. However. What's she gonna do when I drop it on the ground? She's gonna go for it. Show me a nice loose leash here, no tension, so I'm gonna drop it But I'm not gonna let her get it when she looks away same concept I'm gonna click her, and I'm gonna pick up the treat, and I'm gonna give it to her. Don't touch this It's all it's not so much the words that you're saying. I think the biggest mistake We make when we're teaching a dog something new is we save words at them, but there's very little heartfelt communication Even though she may not know "What don't touch that" means right now, she feels my energy She knows what I'm going for, and she's you know, we've worked a little bit to build some initial communication, "Don't touch this please," I'm not gonna make her wait for an eternity right now. I'm gonna pick it up and give it to her. And then if she's okay, and no tension on the leash Only because I know cuz I know that's the instinct, all the more, you should have faith in your communication you should trust that your dog really will know what you mean, if you just take a few minutes to communicate with them more. Training is a concept of training where we use a treat to coax our dog into a specific position So we're gonna use that nose to our advantage, right here So just like this Good, and we're gonna say "Sit" as his butt hits the ground. He already knows that. He know how to lie down on command? Somewhat but not really. So we're gonna use the same concept of training here We're gonna lure them down. A big mistake that a lot of people make with, oh wow He's making it he's making me look good here. A big mistake that a lot of people make with this though, is they do this and well alright Normally they go fast is what they do What you should do is you should let him nibble on it nice and slow. Now if they if they didn't lie down He's too good. I need a dog that's not listening quite that well. Yep. Why am I clicking Delilah right there? She did not lie down, but I clicked anyway. She's on the right track look. She's trying It's it's vital that when our dogs are on the right track when we're teaching them something new That we really let him know we like that Yes, right there, that foot came forward, and then let her know I like it. That's one more step in the right direction Yes, oh I'm gonna reward that cuz that was very good. You see how both of those feet started to move, starting to go into the down Notice the training bubble nice, and low you're nice and tight. You see this, so with a new dog again this provides You're very comfortable if your dog and we're comfortable with her So we're okay with doing it the next step is one of those feet is gonna move forward at that moment be ready to click Do you know what I'm saying really good. I'm good. I love the kisses. I love the affection there. It's very genuine It's very real energy. The more real, the faster your dog learns now. We've got our attention You never know when you're gonna get it, but now that we have it. Yes very good We want to seize that momentum right there, you see what I'm saying? Momentum is a big deal We don't hear a lot about that dog turning because a moment ago, she was like uh huh I don't feel like it, but now all of a sudden, those moments go longer and longer. That's the beginning That's a sign that you're on the right track So I got lucky with a group of people here that seem to really get their dogs And you're very engaging with them be engaging with your dogs And that's such an impossible thing to really teach and have to come from within but the more sincere you are with your dog, the more likely they are to respond to you. This is one of my new favorite classes really, and I love all of my classes I promise I do, but it seems like these guys really got it. I saw very little frustration Do you prefer working with a high-energy dog or kind of more of a chill, low-key dog? I mean everyone's different I personally like energetic dogs to work with but that's me. Let me know in the comments below Also, make sure you are subscribed and make sure you click thumbs up if you like this video And you want more videos like this and like me on facebook facebook.com Slash b zack George, okay. Love you guys and we'll see you in the next video

Please explain how to make malva pudding

if there's one thing I love at the end of the nightly meals it's a good dessert I was happy to discover that I didn't have to sacrifice my sweet tooth on safari in Botswana there were plenty of tasty desserts to help me refuel each night and one in particular stood out the Melva pudding mini one of the camp cooks showed me how to prepare this easy to make desserts it's popular in the safari camp okay I put sugar pissed in my head then I know it's smooth and fluffy now add flour baking powder and baking soda now we're going to mix up the mini lets me help with the next step I combine milk and melted butter with apricot jam and a splash of vinegar and mix away can you tell us spend more time on horseback than in the kitchen then you decide they've mixed it well enough okay then we combined the wet and dry ingredients and give it a final mix so lots of sugar and jam makes for good dessert yeah it makes the little sweet then pour the mixture into a well greased baking dish now we add I need to cook and I can hardly wait to eat it mouth a pudding needs to bake for about 45 minutes but that's not all many then added on a special sauce okay when they breast cooked i heated up milk sugar and butter and I put it on top oh my goodness even more sugar yes all right now I know it's gonna be good especially when we add this heavy cream exactly should we try it yes you it very good thank you I'm gonna make this at home whoa and if I'm gonna make it at home you know it's that good probably better in the wilds of Botswana for more travel video clips expert tips and to learn more about equity on PBS visit our website at eco trekking com

Please explain how to lower insurance car rates for a teenage boy : auto insurance

this is Melissa Morley with all seasons insurance and today we're talking about how to lower insurance rates if you have a teenage boy having a teenager on your policy can be sticker shock especially if the first driver that you have is a boy traditionally in the insurance industry boys have had a lead foot which lends toward a higher loss ratio so when insurance companies go to insure young men they have charged a surcharge for that nowadays thanks to cell phones and the fact that girls are texting and taking left turns and front of oncoming traffic unfortunately girls rates have also crept up but today we're talking about boys the the first thing that you can do that can save you in some companies as much as 30% is to make sure that your son has a 3.0 grade point average or better good student discounts are excellent another aspect is to consider what kind of a car your son is driving sometimes parents go out and they buy their dream car for their son only to find out that the comp and collision the physical damage on that car can be more than three times the cost of their own physical damage on the cars that the adults are driving maybe you should consider having your son get an older car one that you can comfortably put liability only on the other option that you have is to go ahead and maybe share a vehicle with them that is not the easiest thing to do with teenage boys because they're gonna want to drive all the time but if it's a man of affording insurance or having no car whatsoever it may be a consideration that you might have in insuring teenage boys absolutely positively make sure that your son understands the importance of staying within the speed limit many times young boys get leadfoot's and they'll go too fast when they first start out driving you had a ticket on to an already high insurance premium and sometimes you're going to look at astronomical figures so make sure that your son understands the importance of obeying speed limit make sure that he stays a good student and consider sharing a vehicle with him this is Melissa Morley with all seasons insurance and today we've been talking about ways to lower the insurance premium for your teenage boy you

Please explain how to sew a tote bag from a tea towel

hi there in this session we're going to make a tote bag from a t-tail not all t-cells are created the same some are larger than others so if you want to make a decent sized tote big and large you will need a loader to tell but you can make a small one with a small t-cell if you'd like now you can find some really funky tea tales and second-hand stores I'm going to make mine out of everyone I found on the second-hand store you just have to be a wee bit careful with it it's the Ticos aren't 2003 beer otherwise you'll take there won't last too long so all you need is one detail some scissors your sewing machine and some thread and about half an hour of your time so let's get started lay your tea tail on the table and folded in the half and then in half again down the middle lengthwise to make four layers it doesn't matter whether your tea tail is right side up or not measure seven and seven centimeters or two and three quarter inches out from the edges of the non folded side measure at the top the bottom in the middle and then rule and marker line down the teacher with a pen or fabric marker cut through all four layers along the line you have drawn these strips will become your handles now I am as a raw edge that's the non-phone edge of each strip iron it down one centimeter 3/8 of an inch and then fold the strip in half and align the phone edge in the ironed edge together I end up stripping pin it in place repeat this for the other handle now sew along the outer edge to join the handle together sew as close to the edge as you are comfortable a half a centimeter or an eighth of an inch or even closer is great repeat for the other handle now I am the hem on your bag so fold yarn the two and roll down two and a half centimeters or one inch along the top edge of the body of the bag these edges will already have the original theme finished follow the body lengthwise to find the centers in mark the center with a pin now much 10 centimeters or 4 inches either side of the center this is where your handles will go so pen both ends of the handle to the bag align the outside of each handle with the outside mark you've just made on each end tuck the handle under the fold and bend it back up and toward the top of the bag turn the handles in place make sure you are cutting the handle on flat by checking that each seam of the handle is facing towards the unsightly enter of the bag that ensures there's no twist and the handle after you have pen and found it on repeat this for both sides of the bag now sew the handle to the bag so along the hemline of the bag which will include the handles if you feel inclined you can do a little reverse and forward motion on when you sew over the handle this will give it strength but be careful you as you're sewing about four layers of fabric and needles can break so so slowly in hand wind a machine forward rather than using the foot pedal when you're on top of the handle if the sewing machine foot pushes the handle and pack of the dart stop lift the foot and guide the fabric underneath the foot with your finger then put the foot down again before you start sewing again and now sew along the top edge of the bag which will also include the handle there are now two things holding the handle in place repeat this for the other side of the bag now we're going to pen and throw the bag together we're going to do a French theme along both sides of the bag French theme is great because it's strong and it also hides away any raw edges so there's no fraying of fabric when the bags washed with the wrong sides together and right sodas up turn the size of the bag together so a 1 centimetre a 3/8 of an inch seam down each side from top to bottom clip the theme to about half a centimetre or 1/8 of an inch tune the bag inside out and priests why in the same place now so a one centimeter or three out there on that seam again along these edges from the top to the bottom of the bag don't forget to secure your sewing with a forward reverse forward movement anyway three and now turn the bag and the rug why what a unique expect a cold day

Please explain how to make a lined recycled denim jeans bag

hello this is needlepointers.com and i would like to show you how to make this cute lined denim bag from the leg of an old pair of jeans what you will need is some old jeans some lining fabric thread a marking tool and a solution ok the first thing you would do was to cut your pair of jeans approximately 11 or 12 inches long you can see mine's just a little over 11 inches now the next thing you would do is to cut the lining and just terming the size that you need you would measure your pants along the top line is about eight and a half inches you would times at times two because you need it to go all the way around and then you would add an extra inch for the seam allowance so for instance in my example where it's eight and a half of the eight and a half plus eight and a half which would be 17 inches plus one inch so it would be 18 inches all together and the length of it would be exactly the same length as the pant the next thing you would do is what you would sew the lining so you would put right sides together and you're going to so using a half inch seam allowance and we're going to sew down along the side and on the back pocket you can pin it if you want I don't necessarily a loop and I just hold it and so now we're going to sew along the bottom but we're going to leave about a four inch gap so that we can turn it later on and we're going to again use a half inch seam alone so I like to leave my gap in the middle so I'm going to just go here leave about a four inch and then so the rest of the way the next thing we're going to do is we're going to make a little box bottom in it to do that we're going to fold the bottom seam and the side seam together and see how it forms let me open up the seam allowance and you can actually see it there it forms like a little triangle so you're placing the bottom seam and the side seam together like so and then we're going to show a cross here and you want it to be about one inch you can either mark it this one I'm going to just go across and the next one I'll show you how a market but you're going to show cross cut the extra fabric now we're going to do the same thing on the other side of course there's no side seam but you're going to try to just mark it a little with your nail or whatever just make a fold you're going to fold it on to itself like so and then you can take your ruler and Mark it from where the point is not where this is but when you sewed it you would mark it about one inch and then you can use a pencil or a pen marking pen and mark across there and you're going to step so you see it has like a little box in the bottom now we're going to work on the jean part of it turn your jeans inside out again using a 1/2 inch seam allowance we're going to sew the bottom completely closed again we're going to make a box bottom fold the one to match like this side seam where the side seam would be and so about 1 inch in okay I'm finished with that now let's take the denim and we're going to turn it right-side out we're going to place the lining and the denim with the right sides together what's this and in this case I am going to pin the top together all the way around as you see I have a pin another thing please you have to make sure that you line up the box at the bottom with the lining and also with the pants so that they're together okay the next step we're going to do is we're going to sew all the way around it using a 1/2 inch seam allowance now my machine this tray table comes off which makes it easier but you can still do it even if yours doesn't come off and I'm going to sew all the way around ok I fade it all the way around now what you're going to do is we're going to turn it through the opening in the bottom like so and where the opening was all I did for mine you can hand stitch it closed if you want but I just top stitched right along where that opening put it inside and I'm going to go and I'm going to iron this down okay so as you can see it's done all you have to do now is just take it and turn it down and there you have a cute little blonde denim bag I hope you enjoyed this fun project please like share and comment subscribe to our channel because we publish new crafting videos on Mondays and Thursdays on Saturdays we post quick tips videos and we share our personal craft projects check out our website needle for your calm for more selling houses and free sewing projects

Please explain how to seal around a tub or shower

having a watertight seal around your bathtub is extremely important not only to maintain the aesthetics of your bathroom but also to prevent water damage to the bathtub and surrounding materials today we are going to demonstrate how using lepage ultra seal Kitchen & Bath silicon sealant which allows water contact in two hours during application the temperature of the product the surfaces and the working areas need to be between five degrees Celsius and 49 degrees Celsius for best performance apply the sealant at 21 degrees Celsius make sure the surfaces are clean dry and structurally sound next remove any old sealant by cutting into the middle of the bead with the sharp utility knife clean soap scum from joints with rubbing alcohol and a clean cloth mildew can be removed using chlorine bleach it's important to dry out deep joints prior to sealing you can use a blow dryer if sealing around a bathtub fill the tub with water without wetting the joints filling the tub prior to sealing will ensure that the joint is at its largest when applying sealant and will prevent the cured sealant from failing when the tub is filled during use for a clean neat bead apply masking tape to both sides of the joint cut the tip off the cartridge at a 45 degree angle to your desired bead size we recommend 3/8 of an inch using a caulking gun applying sealant with steady pressure forcing the sealant into the joint do not use and joints deeper than 12 millimeters or half-inch without the use of a backer rod tools sealant bead immediately remove the masking tape immediately after tooling and avoid contaminating any surfaces that will be painted as silicon is not paintable clean your tools and sealant residue immediately with mineral spirits cured sealant may also be carefully cut away using a sharp edged tool the tub or shower can be ready for use in just 2 hours after application lepage ultra seal kitchen and bath silicone sealant can be used to seal any sanitary joint in the bathroom or kitchen such as around bathtubs sinks shower stalls tiles plumbing fixtures backsplashes and countertops LePage building confidence

Please explain how to make a pellet gun speed loader

hello everyone inventor 709 here today I have a cool little invention video for you how to make a pallet speed loader out of very common household materials this one will fit 0.177 calibre pellets you can buy them at stores or you can just easily make your own so what you're going to need is pretty much just a mechanical pencil it doesn't matter what size and an electrical end cap or any other thing that looks like that so what you're going to do quite simply get your mechanical pencil and just rip off the end and you'll be left with something that pushes just like that and then get a pair of scissors and what you're going to do is push the button so that it goes out and cut it right there and then what will happen is you'll be able to remove the rod out of the barrel you'll be left with a spring get rid of that and an extra little skinny part and just pull that out or cut it using your scissors and so you're going to be left with simply just a rod and a barrel now on the end of all mechanical pencils there is a little notch part what you're going to do is take your um your saw and cut it right before that not so it's a tube of one simple size don't want it to get narrow so just take your saw so you have it it's a simple tube and then the rod can be inserted into the tube and will be exposed on the other end just like that and then you can get rid of the end cap and all your little pieces what you need to do is put your electrical piece on the end just like that a rubber eraser will also work anything that won't fall off and then what you need to do get your pellets zoom in here and then you just quite simply put them in and first into the tube you can't see it yet but it'll get there and you're going to want to fill it up until there's about two or three inches left so that there's enough room to insert the rod back into it so there's what it's starting to look like there's all the pellets they don't tip over because the tubes not wide enough for them to spin so as long as you put them in head first or nose first it should be good so there you go I think I filled around 20 in there and then what you want to do quite simply just put in like that and then you just you could carry this around with you and you could even put a piece of tape right there so this thing doesn't fall out and then when you're ready to load into your gun and have any one here right now but you just tip it upside down let me zoom out here you tip it upside down keeping your finger on this thing so it doesn't fall out then remove the orange cap OOP one fell out and as you can see there's the pellets and then as you squeeze the thing you just push them all into a brake barrel gun or like a revolver type gun or whatever so anyway very simple you could easily do more modifications so designing a stopper or a magnet or whatever you feel like but basically basically that's it right there so um thanks for watching really easy build today I hope you enjoyed the video and as always please subscribe

Please explain how to make tipsy berries: the coolest dish at the tailgate! - sarah penrod

what's up y'all it's Sara the urban cowgirl it's officially October in Texas football season has started but you know what hockey is just around the corner I'm the big Dallas started fan actually I'm private chef to a hockey player named Tyler Seguin he's a really nice guy got moved to hockey for the first time in my life so today in honor of hockey season I'm gonna be sharing a recipe for my tipsy berries these are these little berries they're dipped in chocolate we're gonna decorate them with your favorite team colors and they have a little pipette of alcohol any alcohol that you like and they're gonna be great for your next party or tailgate so let me show you everything we need to get started okay guys so I've got some almond bark here this looks like chocolate but it's a little bit different it dries really really fast chocolate takes a long time to dry so what I'm gonna do is use almond bark for this project and it's gonna go much easier I've got white chocolate and dark chocolate that's more of a design choice and took three fees and here I always put more white chocolate because you'll see what the design will need a little bit more white chocolate now I've also got two squeezy bottles you know and we'll just put some almond bark in here and a little bit of dark chocolate almond bark is more forgiving than chocolate it's easier to work with so that's another good reason to use almond bark you're more than welcome to use chocolate if you want the chocolate takes a really long time stri and so for this project I just want to get it all out of the way so with the H&C is we're gonna microwave them in about 30 second increments you can stir them a little bit in between and they're just slowly gonna liquify okay and this is exactly what it should look like when you use almond bark it's really easy it's not terribly difficult to work with now we'll just do this with all of the other chocolate okay and this is what they look like when you microwave them in the little containers looks exactly the same she's just gonna put the lids on it's gonna help us to decorate these and if they start to get a little bit too thick you can just microwave it again that's kind of the joy of working with almond bark it's very easy to work with so here's my strawberries you want to work with the largest strawberries that you can find this time of year they're a little smaller if you can find long-stemmed strawberries those would be ideal but usually they only have those are on Valentine's Day I'm just making sure that the strawberries are really dry when you add moisture into the almond bark or chocolate if you're deciding to use chocolate you don't want to get any water so I'm gonna take a strawberry and I'm just gonna dip it in the white chocolate all around just hold the little green out-of-the-way and then I really want to get is the excess off okay and then I'm just gonna sit him down let it start to set up which it'll start to set up really fast when you work with chocolate instead of almond bark it looks the same but chocolate is much more difficult to work with I mean there's pastry and baking people who only work with chocolate just because you have to temper chocolate if you don't temper it it doesn't get hard fast enough it it's just a little bit more problematic almond bark it's just kind of a product for the rest of us it's very similar to chocolate but you don't have to be an expert and I'm just going to continue I'm going to do some white and then I'm going to do some dark chocolate and you'll see later how we're going to design them okay guys we're all back the strawberries have a hardened just like that it didn't take that much time and now I'm going to show you some of the different stuff that I'm going to be using to decorate them so over here I've got some edible glitter I've got it in black I've got a couple different shades of green and one sheet of white okay and then I've got luster dust and this comes in silver and gold what we're gonna do is mix it in a little bit of alcohol whatever you got vodka rum doesn't really matter you're just gonna put some in there and it's gonna make this gorgeous paint basically that you can paint anything with now one thing that I use that some people may just use with the wet chocolate I by confectioner's glaze you can get this online you can also get it at the cake store and all it does is make chocolate confections shiny but what I use it for is to make the stuff stick it's really cheap no big deal so just make sure whatever bowl that you put it in your you're okay losing because it's really sticky and I just I don't find that I can wash it out very well so I have two little paint brushes anything freshers will do but again whatever you use with the confectioner's glaze you're gonna lose so just make sure you're comfortable sacrificing it so I'm gonna start with one of the chocolate berries now the luster dust that we that we liquefied looks really good on these so for the big wins with the glitter I'm just gonna take the confectioners glaze and I'm just gonna brush it on clear doesn't taste like anything again it's just meant to make confections shiny they use it on wedding cakes and stuff and it gives me something to make the glitter stick I'll just take some of the green this is really pretty green and okay so I've got a decorated berry and I'm gonna do a little bit of the white chocolate drizzled on top okay look how cute they are they fun so the last part of this is to use these little pipettes now you can get these on Amazon they're really cheap they're like 100 for nine dollars and we're gonna fill them with something today I am gonna be using brandy this is a vanilla brandy I didn't really drink brandy my whole life and then around Christmas I always make like a apple cider hard apple cider so you guys how to make it this year and I got some peach brandy and I loved it because it's strong but it's also got a little bit of flavor to it so I thought this would be perfect to use with a little vanilla brandy and so all you do is you pull it up into the pipette and you'll just stick it in and it'll sit there until someone comes and picks it up so here they are this is how you'll you know go into the party and this is how you want to kind of explain to your friends to eat it you're just gonna take the little pipette out go this level a little shot it's not enough that it burns but it's like a little taste it's kinda like to get the party started and then all right guys I'm Sarah Penrod the urban cowgirl you're gonna be able to get the recipe for the tipsy strawberries at urban cowgirl life's calm if you like what you see hit subscribe there's a little bell down there and if you tick that you will get a notification next time we post the video which is pretty regularly we hope you're gonna try this recipe out and we'll see you next time

Please explain how to draw a ghost super easy

hi guys wendy here in this video we're going to draw my draw so cute ghost so let's get started with this goes we're going to first start by drawing a curve right here so this is basically the outside shape of the ghost so i'm going to start about right here just give it a very slight tail and then from there i'm going to basically be drawing kind of like an upside down u so i'm just going to go all the way up and don't worry just have fun with this because you can make your ghost whatever shape you want this is just a very simplified go so i'm just going to come all the way around and come back down so that about right there i'm going to stop and start to give it a wave so i'm just going to come around nice soft wave and then bring it back in here so that's the basic shape for this very simple ghost and then from there let's bring it to life so right about right here i'm going to start to draw two circles so one right there i'm going to go across more towards the edge now draw another circle so then from there we're going to make them draw so cute eyes so in here i'm going to get two highlights so two small circles inside and a curved line at the bottom and shade in the top so it's that time of year again when halloween is almost upon us so it's time to draw all these really cute scary characters and right here the same thing i don't think they're really scary they're more cute than scary but it's such a fun time of the year so hopefully you guys will look forward to all of the halloween drawings i plan to draw for you guys and the lines at the bottom and so from there i'm going to come up here and just draw a little curve just to anchor my eyes on top and then right here of course because this is a happy ghost we're going to draw a cute little smile right in the center and cap it off so that's pretty much it for our ghost but i wanted to add a little something to it so right here i'm going to draw a tombstone so i'm going to come right here and just draw a another upside down u so say about right here i'm just going to draw a curve that goes up it's going to be overlapped by the ghost so i'm just imagining coming over and just bring it in and right here i'm just going to draw a straight line so i'm just going to anchor my tombstone and i'm going to come in here and just give it a little dimension shouldn't come about right here just add another curve and i think it went a little too high right here so i'm going to come in and fix that okay so then from there of course because this is a tombstone i'm going to write the words r i mean the letters r i p so i'm going to come in here go r i p there's so much things you can do with this it's so fun right so hopefully this just inspires you to be really creative and make your own little ghost in his own little setting whatever you want and of course this ghost died let's see here what did he die of he died let's see him died of cuteness overload i don't know i was trying to come up with something so hopefully you like that and of course right here i'm just going to give him a little speech bubble and a little heart in here and why not add a little heart in here too and then add some grass so there my drastic cute ghost that died of too much cuteness hope you guys love this drawing and thanks so much for watching and if you did like it please give me a thumbs up and share it and remember to subscribe so you won't miss any new draw so cute videos see you later you

Please explain how tooooo: make a cardboard boomerang

how to make a boomerang right today we're going to be making a boomerang out of simple cardboard that you can find anywhere at home today you will need a glue stick scissors possibly a protract a protractor if you want to be precise a ruler doesn't have to be that a pencil and a pen you can also have other decorating kit but that comes at the end back over here right so this is what you need to draw these lines here each have exactly the same angle between them 120 240 and 360 degrees on each side of these lines two centimeters out draw the outline in the end you will end up with this sort of shape this may require a couple of goes right once you have the shape you can pause the video then you need to cut this out that's what i'm about to do hi guys i'm back and i'm just about to finish cutting the boomerang last little bit and we are done there is the first layer of the three bladed paper boomerang so now you've done this you should put this on a new piece of cardboard draw around it and cut exactly the same shape again i've already done this here now i have two layers of two layers now when you put these layers together be careful because they don't always line up as you can see these two line up but these two don't so keep turning them around and experimenting until you find how it must be it takes quite a while i'm almost there okay flipping it over helps and it looks like i have gotten perfectly aligned right once you have this then you can put them down grab your print stitch and then you need to put a ton of glue on it i think you made a bit of a mistake there lost my lining there you go you see that it's all perfectly lined up then you can simply just push them together then wait a while for the glue to dry not too long because it's only pretty i'm not here to show you how to decorate it but you can decorate it as you wish but i'm going to show you how to throw it so at a 45 degree angle tilt it um ideally have the a light breeze coming towards you and throw it just to the side of the wind then as if you're whipping someone throw it in the palm of your hand and let go at the very furthest forward point then it should fly out of your hand and come back relatively near you you might even be able to catch it if you've made it properly please subscribe and comment and like this video thank you

Please explain how to make a less sweet pecan pie

hello nature's friends Chloe thought with a mother looking for a caller today today we're going to show you how to make a pecan November fixing you going to the holiday season I figured everybody might like to know this one it's a really good it's less sweet if we use less sure we'll show you all the ingredients first is gonna take our pie crust set at room temperature this is a Pillsbury Pat crust we like them a lot we don't make our own pack crust and refrigerated Department in you grocery store and set out and get room temperature getting out of here thank you struggle and within the sprayer popayan this is like a 9 inch populate unroll there I crust maybe doing gardening videos all the time so we'll share some of the cooking stuff okay lamien we're round patent it we're gonna take our knife cut the extra off everybody seems to like pies around holiday time and there's nothing wrong with that now we've got a cup and a half of pecans I am NOT leaving you use pieces I've never done it but I'm sure it's gonna come a time when I will I like to experiment okay put them on the bottom okay now we're going to mix up half a cup of sugar and four eggs set your eggs at room temperature break them in the bowl like this so you know you don't have a babbler these are happy eggs so you never know what kind of spot you want to have in them okay now we're gonna beat this up you don't really want to beat it too much because it makes a lot of air pockets okay now we've got a cup white corn syrup do you sugar and eggs first then you do your corn syrup we have a tablespoon of vanilla we have a half a stick of melted butter real sweet so we're gonna do it this way with what the half a cup of sugar it's not as sweet so you enjoy it better you can eat more I think okay we haven't gotten beaten up enough let me check it out and see if I got it this time yeah it looks like I got it pretty good shape never going to just pour this on top of it the cops pecans always flick to the top now we're going to place it in the oven be careful not to make a spillage over there we're gonna cook in about 20 minutes you cook it 45 to 50 minutes we're gonna cook it for like 20 minutes and check our crust and save just turning brown then put some fall over so we'll be right back turn a little Braille I'm just going to slash it checked it it won't get too Brown check another bet in another 30 minutes and see if we're getting ready okay Knapp been in the oven for 45 minutes and you can see I got to have it turned off nice and fluffy that crust is good and brown get on Picon back in the right spot okay we're gonna let it cool down and we're gonna cut it cut us a piece and let you hear the sound effective when I take a bite up and then we'll show you that okay everybody pies cooled off enough now and then we cut it and see what's gonna taste like the moisture brought to my attention this is more like a custard pie Danette rule now when this colder is does handle a little bit better but we can't wait to taste it okay you'll see what it looks like okay now after the test give me a pecan hmm still warm but very good so I hope y'all make it and y'all and do it over the holidays it is mighty good I want to take a piece to a gap on the job tomorrow so I tell everybody next time I'm Harold with nature spreads have any questions you can email us on nature's friends I did bark mail calm thank you for watching

Please explain how to unclog a sink & shut off water

if you have a hair clog in your bathroom sink and you want to resolve it yourself you have to get the pop-up removed from the sink it's not that hard to do but there it is a little bit trickier than some underneath the sink here on the backside of this there's a knurled piece that you can unscrew counterclockwise and that's actually going to release the lever that holds the pop-up in place once that's removed you just back you just pull it back out and then back up here you'll be able to grab the pop-up and remove it and then you can clear whatever hair or anything that's in there and when you go to put it back in and if you can see down inside that that little arm that little lever is going to come you can see if you can see you know if not it's there believe me so all you got to do is just position this the correct way that you took it out straight in the back typically how this is offset and go back towards the back of the sink drop that back in while you're holding the lover in place you'll feel it we engage into the pop-up once it's there just hold that back in place and then just screwed clockwise that piece that let it be remove make sure it's nice and tight finger tight usual will do it and then your pop ups back in place one more point I wanted to make about the the sinks all of the fixtures whether the toilet of the sinks have a water shut-off valve on them so if you situation your sink is clogged for whatever reason there's water leaking out of this and it's and you can't get the shut off and it might cause damage underneath the sink there's shutoff valves and this will stop the full of water to it so it can't do any damage and all you have to do is turn it clockwise one quarter of a turn to the right clockwise one quarter of a term and that will shut off your water so any problems going on with this sink water related that's how you shut the water off

Please explain how to improve memory - how to memorize a poem - how to memorize a speech

if I met you if I did not ditch you do not stand up this is a beat-up the memory guys I'm all right okay however if before the meeting today i said hi my name is long and you said my name is Garson if we went through that grill could you please stand up ok nevermind sit down I'm gonna do it I'm just kidding all right guys and I may not get this perfect but in the spirit of Mary Kay and the spirit arena tarbet i'm going to give this a try whenever I call up your name have a seat whenever I call up your name sit down so that means Kathy you can sit down Heidi you can send out dog you can sit down Robin you can sit down Garson and michelle and Alison and Linda and Jamie you can sit down Katherine and Rita and April and mark and Kim and Iran and windy and Kim and Jonathan and Clara and then cassandra is that correct and then is it Christina right and now i'm going to be stuck on your name I am I think it's Kara oh alright and then katie is that right you can have a seat and of course how can I forget andreia and Lauren and I don't know if y'all know this but Gail is a troublemaker but you can have a seat Gail see that you could have a seat and of court by uh Barbie and Terry tried to move on me didn't you but it didn't work God we go ahead and have to see and then Lauren was good to see you again rodney was good to meet you Tom it was good to meet you Mary was good to meet you that I here Riley said county earlier was a cabin Jerry on it we didn't honestly made it in some couple rows back so okay is it Linda is that right Linda and jam and then oh my gosh replica back to you and Tiffany & Marie and Donna and Bobby and more and qwali and Callie and Angie and Regina and Leslie and Lisa and Kathy and Cheryl and Jeannie right all right oh we're not going to Sylvie over here and we have rhonda and julianne over here my short pants how do you mean you'd like what i do that

Please explain how to build a cedar snake rail fence

okay so today Wendy and I are making a cedar snake rail fence and she just got 48 of these as his Western redcedar and she's putting him in front of her little studio over there and it cuz it looks more natural a lot of these have moss on him so she like I say she got a dump truck loaded them today and no nailing work yeah this one's got woodpecker holes in it which is even more awesome so let's grab one and I'll follow this team got that one so we're gonna show you how to put these things together if you've never made a snake rail fence before we have a snake rail fence in front of the lower property there it's been there no I don't want it it's pretty hard to dig holes if you see these are beauties trees that's growing in rock it's all rock here all that rock comes out of the ground so we're gonna put these what do you want to put this one right here or do you want to do on the other side so we're gonna go six high okay let's put it over on the other side no you can't put it there okay drop her house good okay I want to show you how we put these guys together so we're going right along the whole front of this garden here we're going to keep the deer out because deer are a pain in the rear six high they smell really nice here's one here this one's pretty chopped up okay that's good okay grab it and the nice thing about cedar it's got natural oils in it so it lasts forever he seems to last a hundred years out there these are old trees that were laying down in the forest that friend cut up and we got from them so yeah he does firewood and he sells cedar rails which way you want to go where are you going no I'm trying to face this out oh I see okay I got you I got you okay and then you just place it like that and put it sideways like that okay so this is this Oh snake rail fence goes together you see they just kind of fit together but on this side I'm going to cut blocks of cedar to raise them up to space them and then that's sitting on a rock and we're gonna put a rock under there or a brick I could get some rocks I'll go down below the property and get some and a rock there where they contact and then we got to put a spacer in there too so this one here so well you want to face it out yeah it doesn't really matter break it up a little bit place shot of her heinie all right and that's what a snake rail fence it's taking shape three high and then there's more over here too so looking pretty good all right thanks for watching that's how to do her folks

Please explain how to: curly clip in extensions using kanekalon braid hair

to my channel and if you want to learn how I did this hairstyle using curly clippings stay tuned okay so if any of you guys have seen my pictures on Instagram you know that recently I have been rocking my beloved ninja boy when I was relaxed and when I was transitioning my favorite go-to protective style was the ninja boy but since I big chop back to natural of course my hair is not long enough to do them how use to and I really missed them so I ran across this video on YouTube actually on how this girl made her own curly clippings and I'll leave a link to her video in the description box but I just want to show you guys if you don't already know how to make your own curly clippings is just regular Kanekalon bright hair any kind doesn't matter I got this for a dollar at Dollar General Games now the general has bright hair so this is what I have also you're going to need bobby pins and you're going to need perm rods so the first thing you're going to do is section off a piece of bright hair as small or as thick as you want it this is actually bright hair that I couldn't have liked it was way longer I used one half of it for my clippings and I already had made and so I'm going to use the other half to show you guys how I did it and so this is about the length that works for me if you want your shorter you can cut this to be shorter or if you want them to be longer you don't have to cut the hair at all but this length works for me so I'm going to section off a piece of hair about this thick I'm just pulling it out the already made hair then the next thing you're going to do is take your bobby pins and let me talk about these bobby pins for meeting I got these from Sally's for about I can't even remember how much I spent forum they're a bit more expensive than the other brand of bobby pins but these are the actual sadly brands bobby cans and they look like your regular pins but what I love about these is is that the tips of the bobby pins and the bobby pin are all one piece which means that these little tips are not gonna come off like I've had these for months and months and months and they do not come off and we all know that when those come off they're painful you need to throw them away because that will irritate and damage your scalp so I prefer these but anyway you're gonna split the hair and grab it right in the middle and then you're gonna take your bobby pin and you're just going to attach it to the hair like so so you're gonna have the bobby pin and you're going to have the hair like this now what you want to do is you want to secure the hair to your bobby pins so you're going to knot it and you're going to double knot it to make sure that it's secure all right so you have your nut and then you still have your two pieces of hair on each side now basically all you're going to do is you're gonna do a twist out on your braid hair and so don't judge me but this is literally how I do it like I do it the night before and this is exactly what I do have your twist I guess if you let these go your twist is gonna unravel so what you're going to do is um you're gonna do like you would have twist out and you're gonna roll this and this is your finished product you're going to be left with your bobby pin which is gonna work as you're clipping at the top and then you have your perm rod and the twist wrapped around the perm rod and then are you gonna do with this and I'm not gonna show this on camera because it's really simple and I don't want to go through the process of walking into my cue chain and out it because it's Sunday we cook Sunday dinner so it's not going okay so but are you gonna do is you're gonna take this and do it like you do your braids you're gonna do that synthetic hair in boiling hot water for about five seconds tops it doesn't take that long be careful you're gonna pull it out and you're gonna let it dry like like this don't unravel it until the hair is dry what I do is I do this the night before and then I lay them on a towel and I let them air dry overnight in the morning they're still gonna be able to damp because they're twisted up but the curl patter is going to be there you're going to unravel your twist out your perm right you're gonna be left with clipping extensions that resemble something like this and I mean it just resembles what our natural hair looks like in a twist out this is a washing oh by the way if anybody is wondering but um so you can separate these to make them it's you know fool or you can you know leave them as defined as you want to I'll typically do 10 to 14 clippings and then all you're gonna do is put your hair in your bun like you would any other day and you're gonna clip these going around your bun and you're just gonna wrap them like you would marley hair i like these because one bright hair is a lot less expensive in marley hair you don't pay 99 cent to $1 for bright hair you don't pay five to seven dollars a pack for marley hair but you can't do this with marley hair i like these please also because it matches my next row hair texture i like this also because it matches my natural hair texture a lot better than the Marley hair I found that the Marley hair is a bit kinkier than my natural hair so whenever I try to be with style with Marley hair it just looks inauthentic so to speak so that's another reason why I like to use these clip is also you don't just have to use these clippings for bones you can also use it to make your hair fuller you can use them like curly clip-ins which is what I like so I'm obviously not in the camera but crazy but I'm just gonna show you like a way that she would do that you would just clean would make as many or as little as you need it and you would just clip them in around your hair to make them fuller and obviously you would tailor the size of the perm rod to the size of the curls that you have or the hairstyle that you're going for so I would probably crazy right now because I wasn't with me in the mirror and I didn't turn the room to my why should go texture play you so anyway I didn't shoot an actual tutorial of how I clip my clippings going in around my bun cuz I always are so that's so simple and you guys really don't want to see that but if for any reason somebody out there doesn't want to see how I actually just clip them in just leave a comment below and I'd be more than happy to do that for you so as always thanks for watching guys and I'll see you in the next video bye welcome back to my channel this video is long overdue but into alright have not been able to get my real hair in a ponytail or a workable ponytail until recently don't like it I'm like the way that sounds let's chapter welcome back to my channel

Please explain how to replace / install 4runner 1993 93 2nd gen

today we're going to be replacing the starter motor on a 1993 Toyota 4runner with a v6 engine it is my understanding that the starter motor will come out on the passenger side front wheel well and so the wheel will have to come off and this cover will come off and the starter motor will come out this side over here so let's get started first thing to do is remove the passenger front wheel I've got the jack under the car I'm going before I jack it off all the way I'm going to loosen the lug nuts on the wheel and then as I Jack it up I'm going to put a safety brace or a jack stand next to the jack just for safety while I'm doing this work okay the tires off and now I got to remove this plate right here let's see where's my hand right here movies screws take this plate off so we can access you can see the starter motors right here I can touch it one thing I haven't done is taken the negative cable off of the battery that's the first thing I should do before any you know wiring work is performed so I'll take this cover off and then I'll get the negative battery cable removed and I'll probably remove the positive cable also but you always remove the negative cable first so if you're wrenching on the negative cable on the battery and you touch the frame it's the same thing it won't it won't arc but if you're wrenching on the positive battery cable and you touch the frame you're going to get a spark and it'll scare you a little bit all right these are ten millimeter screws so I'm using a ten millimeter socket with a short extension just to keep my knuckles away from here so it's a ten millimeter okay what I want to talk about now is I know I have to move these wires out of the way in the starter is supposed to come out this side hole here which is pretty tight I don't see any other way to get that starter out and that's what I I read up on before I got started this this one with foil on it this this wire with with foil on it it comes down and it has like a elbow do it right here and that elbow is is it's it's on an arm and it slipped down on the arm in it it's kind of locked on it just so you know that thing has to be has to pop upward offs off that sleeve behind that flat piece and it's pretty hard to get it to pop off of there I was thought it's going to break something but it finally popped off and now this piece is now movable so now I can move it out of the way I believe I hope I hope I can get far enough out of the way to get that starter out of there but that's something you need to know is that things hard to get off of that okay now I need to disconnect the the wire that goes to the starter because fixing the break of the battery cables did not cure my problem so I'm going to install this new starter I'm trying to I'm seeing how I get this out of here I'm under the car and I can't see how to get this undone so I'm like well let me go look at the new starter and maybe I can figure out how to get that unplugged I don't have to push that and pull something or whatever but it looks like either have to push or pull something on the top okay I got it the plug was here I'd had nothing to do with up here it had nothing to do with up here it was on the top here I had to push down on the on the on the plug and pull out so in front of it right here I had to push down and pull out I guess something goes in and hooks on this this lip right this end Huck's on this lip right here so you want to push it down and pull it out so the button is here okay so there you go no problem now you know how to disconnect that without you know frustrating trying to figure out everything I just figured out all right okay with the wires out of the way I was able to get a ratchet to the positive wire on the battery from the top I have seen where they would take long you can get it from the bottom of the vehicle with really you know get all your extension and stick them all together and you can get it from the bottom I barely got this thing on there and I came off and the size socket the socket size is it 12 in this case to get that off so I'm going to put it back on there so I can get that nut loose and get that thing off of there that's for the positive wire on the starter okay i ended up using big long put together extension from the bottom I did a little bit from the top seemed kind of tough so I went from the bottom and I can spin the ratchet a lot more and I just loosened it I'm going to put my hand in there and take the nut off and that's not off yet I don't want to lose the nut so I just loosened it and I want to get it by hand so I don't lose the nut okay I'm under the vehicle and I'm my head is under the passenger front passenger seat I'm looking forward towards the front of the vehicle there's I've got a socket on the top starter nut if I back out you can maybe that's you and it looks like I can put a swivel on it and get it from down here and loosen that top bolt from the back here another way would be to just put the ratchet on it and get your hand in there through the top but I don't know if I get enough leverage on it to get it loose so it's pretty tough one to get to but there it is it's got a long socket sitting on it right now okay now I'm at the front of the vehicle and I'm the skid plate is off and I've got a light in there and I'm going to I'm going to take a really long socket I'm going to look to get that bolt right there off that's the front or the bottom bolt to the starter and has a little bracket on it you can see the bracket is on there that bracket just has this little it's just a little straight thing it just goes up and you slide the the other wiring harness it just kind of hooks on to it it's the one that was really hard to pop off earlier I didn't know where it came from that's where it is so I'm going to take a really long socket from the front of the vehicle and I'm going to loosen that nut yeah it's a really long it we got a couple feet long I'll double-check on the size of that nut in a second here there it is oh it looks pretty big there you go here you can see the ratchet and all the extensions I stuck on that sucker to get it in there up to that nut and it wasn't that tight it really wasn't that so you use this long set up for both of the starter bolts okay everything is undone the top bolts really loose it's wiggling in there I'm ready to take it out I'm as you can see I've moved this cable out of the way I've moved another one out of the way I took it I took it off moved it over that's out of the way this is going to be out of the way this is where that bad thing is going to come out it's going to come out the wheel will so on a 1993 6-cylinder 4runner the starter comes out in this wheel well here and I've shown you the tools you needed to do it um let's see I'm gonna get this one out and get the new one in I'm pretty happy right about now okay the new starter is going in what I did is what was suggested is I'm connecting this wire here is what suggested I think that's the ignition switch igniting wire so I'm connecting that it's going to make it a little difficult put it in but it's hard to get that connected you can reach your hand in there I know because I disconnected it with the starter in but I'm trying to I'm going to try and do what they what read up on another website to connect it first and then I don't have to try and get it in later but I'm going to try that and see what happens try and get this in because I if I do that and this other wire that it's connected to gets in my way a little bit so we'll see how it goes

Please explain how to make an adjustable dogs collar

hi there so today's vlog we're going to make a adjustable dog's collar I chose to make this cute red pop collar so what you'll need for this is your nylon strap the ribbon that you want to decorate it with scissors lighter male/female buckle d-link here and an adjustable slider and of course your sewing machine so to start the size of the nylon strap as a general rule you start with 11 inches and then you can measure your dog dog's neck for example my dog's is 11 inches so add that together that's 22 inches this will work generally for a small to medium sized dog as it is adjustable and just remember when you've cut the edges here to get a lighter and just advance just to stop it from fraying and looking tacky at the end do the same with the ribbon ribbon is also cut to 22 inches so for this one it is if you find it easier you can always pin it and then you need to take this to your sewing machine and sew all along here and a line and on the bottom there so now on your sewing machine I'm just using a normal cotton thread a red one just so much color it doesn't stand out okay so now as you can see the ribbon is attached to the nylon strap right so next we need to change the thread in the sewing machine to some nylon strong frags now I couldn't get red to match my collar so I've got invisible but you really do need the nylon thread just to make it extra strong for the dogs so just change my friend so now I've got the nylon thread ready in the sewing machine so the first thing we need to do is add the adjustable slider put that on and then just pull it about an inch to an inch-and-a-half so just about there and then we need to so you can either sew an hourglass which is a nice strong stitch or a box stitch which I'm going to do I do go over a few times just to make it extra strong but the nylon thread is really good for that so take that Tuesday machine okay now as you can see or not see as it is invisible thread it's gone over that box shape they're about three four times just to make sure it's really really strong right so the next piece okay now so now we need the female buckle which is this piece you need to turn it it over slide that through there and then you need to go back through the slider and all that it should be quite tight okay so then you should have something that's looking like this then you need to get you be link pop that on the other ends then get your male buckle hmm slide that one through that piece needs to go over the d-link they're about two two and a half inches so looking like that and then we need to save another box stitch just on this bit here so I've done the Box stitch there with the invisible thread you can kind of see it and so there's basically a dog collar nice pretty red hearts with your adjustable size there thank you for watching

Please explain how to make your home more energy-efficient | rismedia's home update

welcome to today's home update I'm Kelly these days it seems everyone is improving their efforts to be more sustainable here are some easy steps you can take to improve the energy efficiency of your home and save you big bucks begin by focusing on these small cracks and crevices around doors and windows according to lowes a 18 inch space between a standard exterior door and its threshold is equivalent to a 2 square inch hole in the wall close those gaps to save up to fifteen percent in heating and cooling costs next lower your water heaters thermostat setting less heat means less fuel while you're at it blanket or insulate the water heater to reduce the amount of heat lost by the unit particularly if it's located in an unheated area also be sure to insulate water pipes to prevent heat loss that can cause your water heater to work harder don't forget to change furnace filters to prevent reduced air flow through the heating and cooling system and overheating that can lead to compressor damage in the AC systems violate install water-saving showerheads and a water saving toilets to use less water and see more savings thanks for watching today's home update see you next time me

Please explain how to make an arabian show halter

okay so why don't we just go ahead and get started on the most difficult part first and the first thing you're going to need is some just some regular sewing threads what you're going to do to make this tassel is you're going to have something you're going to need something to wrap it around now you can use like a piece of cardboard or like these paper cardstock whatever start and you're just going to kind of hold it in the piece of thread in place you're just going to wrap it now go ahead and cut the bunch of thread loose once you've slid it off your cardboard or whatever it was that you were using next thing you're going to do is you're going to go ahead and take a jump ring use needle nose pliers to open it up enough so that you can flip the thing of thread through now go ahead and close the jump ring so now go ahead and take that single strand of thread that you cut and you're going to place it like that and then you're going to tie it it's just like right about there and just tie it go ahead and cut off now be very careful not to cut you know a bunch of thread that you just tied together just cut off that now you should have a little tassel that with a jump ring all tied together and then you're just going to cut the loop like that alright so I think we should start gluing a few things so that they can begin drying get some ribbon 2 inches in like a little bit more maybe and then grab a buckle and if you don't know how to make buckles I have I already have a how-to on how to do that so I'll put a link in the description kind of weave it through the buckle and then you're going to kind of fold it down so that it holds it in place and you're going to glue it like that and fold it down so just go ahead and let that dry now all right now the next thing we're going to do is be making the the fun part really and now go ahead and get a piece of wire get it kind of so that it's just like a hook cut this off and you're going to take your tassel that has the jump ring on it and put it with the hook and then you're going to close up the thing at the end take some beads and just make a design any design you want once you're done putting your beads on kind of just fold this into a loop put a jump ring through it and then go ahead and close up the jump ring do that twice so that you should have two of these and then for the smaller ones you're going to do the exact same thing only maybe make them just slightly smaller and don't put a tassel at the end unless you want to you should have two little dangly bits like this take your ribbon so that it's just on the little jump ring right there and then you're going to glue it like that and so both of these little dangles will be attached by this thing of ribbon and take another piece of ribbon and your another dangle and you're going to do the same thing where you just put it through the jump ring and fold it down go ahead and attach this bit right here you're going to put it through the jump ring that is right here and fold it over so that way they'll everything will be attached so you're going to just take it fold it over glue it down now for the next thing you're going to do is you're going to take your strap that already has the buckle glued on and you're going to glue it to that jump ring right there and then you're going to take about three inches of ribbon so this is what's going to be at the buckle strap and you're going to glue it and fold it over onto that jump ring go ahead and take your wire cutters and just cut a piece of the chain take the chain put it through the jump ring and make sure when you're doing all this the halter is upside down the other side through the jump ring you're going to take a jump ring that mine's already cut like pried open and you're going to attach the two pieces of chain with the jump ring just like that once you attach the jump ring and attach the two ends of the chain together you can just slip it on and to get it on you're going to put the strap through the buckle up top here and then also just slip the chain under the chin and mine doesn't have a throat latch you can add one if you want but I don't want one on mine and I also made a lead so she has this nice little lead rope and that's it that's how you make a halter I hope you enjoyed bye

Please explain how to diy

what's up guys so today's video I am finally excited to tell you guys that I'm installing the qtp electronic cutout on my truck so you guys are gonna see how exactly I installed that and what's involved in that install I'm actually recording this after the install so there were a few hiccups that I encountered installing that wasn't quite as straightforward as I had anticipated but it did all fit it did go on and didn't require any welding which was nice but you guys are gonna get to see exactly how to install that and also its operations so let's go ahead and get into the install on that here's a truck 2014 RAM 1500 Sport Edition and obviously has some customization to it so here is the parts we're gonna be installing here's the qtp stuff ironically this stuff is all kind of sold separately which is kind of a little bit strange but I'm gonna go ahead and show you so I opened it to make sure I had everything because they don't give you everything completely so that's what I want to show you guys so this big box here is one of the kits and I'll list all the part numbers and stuff you guys want to do this this is this partner five two zero zero zero nine and they didn't help me out with any of these parts I've bought all this stuff my own money so if you guys liked it or not as far as the parts don't feel obligated to you know buy this stuff but I just bought it because I thought it was a nice kit but ya all paid for with my own money so here it is this is the actual Y pipe portion of it and if I can get it out here has one hand this is basically what you're gonna see so there's basically this Y pipe here and of course it's flanged already and it's ready to be bolted on you don't have to you know the weld anything which is nice it already has this hanger in the factory location and it's stamped here hopefully you guys can see qtp and this is where the electronic cut out portion of its gonna go as far as in here I don't know if I can get the light angle to work for me but that's the kind of cut portion it looks like in there it's not too bad hopefully you guys can see that it's not too bad but it's not like a port and polished look or anything like that it's a little bit raw inside but obviously it's gonna get the job done as far as opening up the exhaust and making it free-flowing so that's that portion of it and then in this box here we have the actual electronic cutout portion this is actually going to be our electrical parts this is the hardware of course two clamps they have the block off plate if you want to block it off and this gasket they give you one gasket that's what I'm gonna get into in a second and there's your three bolts four horses three bolt flange underneath that we have this which is our wiring to come from the cutout and they give you this switch so this switch is if you just want to toggle it manually you know sit there and push it this way or you know open or closed this switch is incredibly stiff I've never seen just a stiffest which for such a puny cable but it is what it is I'm not gonna be using it anyways and here's of course the money the qtp cutout Electric cutout so it looks pretty good hopefully sturdy you're supposed to apparently lubricate this thing once a month just to keep it from gets gunking up with carbon or whatnot but that's that portion and here's what I want to get into so all electronics aside basically they tell you that you should in the instructions they tell you you should have this turned down to be able to aim the exhaust towards the ground and not just straight out at your your frame rail or something like that so they tell you to buy this this is a separate part number this is one 303 inch adjustable turndown but what they don't tell you is that there's not a gasket to go they give you one gasket so you're gonna have the gasket between this and that flange over there right so and then they don't tell you you need another gasket for the other side of this thing so you end up being a gasket short so I had to go to autozone and just pick up a 3 inch basically the performance range gasket so that I have a gasket between this flange and the qtp and then the cutout and then on the other side we have this gasket that they supply us so I guess I can go ahead and use two of those or I might use this one since this one looks a little bit better but I don't think there's any anything wrong with this one this one says it's for a collector so that probably sees a lot more heat than this thing is going to so that's that portion and last but definitely not least is this part this is the money here that I think makes this kit really cool is this is the wireless remote cutout controller so what this thing is is basically it's a controller that allows you to install this and have wireless control over the cutout so it comes with this little box comes with these two little remotes you know open and close which you can actually program on the home link buttons which we're gonna do after but this is basically it it just needs power and to ground it and then after that you basically have wireless control over that cutout which is nice the only other thing is this is not a waterproof unit so I have to run this into the cab to keep it away from the elements so not the end of the world but would have a nice opposed waterproof so I could just connection to my battery and be done with it but we'll have to bring it into the cab just so this thing can stay dry so this is pretty much it this is all the stuff I got a sawzall ready here because we're gonna have to cut the pipe but let me get into that stuff and get situated and we'll continue so the instructions call for this is basically right after the header the Y pipe the why basically connects it here and then stretch nuns call for 22 inches from this connection to here so this is 22 inches I've gone ahead and measured it so you want 22 inches and the reason being is because this pipe is actually a few inches longer and this is gonna replace this and this is going to hook into this hanger here so basically this is a little bit longer it's giving you enough pipe to fit into here and we're going to replace this section of pipe with the cutout so let's go ahead and cut this okay so we have a nice clean cut here we can go ahead and take off our clamp on this side and this is going to be 15 millimeter nuts to take off this clamp and then we should be able take this pipe out of the way with my truck being at 2014 a little bit older and higher miles these bolts did snap off the clamp but not a big deal those clamps are like $3.00 at the store so let's go ahead and get the other bolt off I'm assuming it's going to snap as well but we're just trying to get this out of here at this point okay for the record guys this mid-pipe or whatever we're calling it is a pain and you know what to get off so I ended up saying forget it I'm not gonna try and salvage it if I ever want to go back I'll just get a an exhaust shop to just put something back in there but basically I ended up having to cut a slit in it to get it out and it's basically it's a u-shaped clamp and it goes down and it's it's one of these ones that basically when it crunches down on the pipe it makes a bead around it and it was nearly impossible for me to get that be done done so you can see just the hump that it created in the pipe and the inner pipe is actually has this matching kind of hump in at two so it had basically formed itself on there and I tried getting it off with with everything so I'm sure maybe you could heat this up or somebody has some tricks of the trade but as far as just working with simple hand tools and trying to do it here it wasn't happening without me cutting it so basically I just got creative I was just very careful and cut across the top and not to cut the inner pipe and then I just basically chopped it off the end here and basically just made my way and connected the dots and as soon as I did this the thing just popped off it was under a ton of tension so you guys might experience that I even tried whaling on the hanger to try to drive this off and ended up popping off the tack weld on this hang or two so it was just a Mickey Mouse tack weld so everything's here if I ever decide to go back to stock or something like that but I think it's just better off just to cut it off and then worry about it later if it had a nice clamp like one of these ones right like I had a clamp and a head like that same as what the qtp is where it has slits cut in the pipe and it's a nice nice joint there then this would have came off no problem but with this type of clamp around that where it kind of just crushes the pipe it was almost impossible to get off so anyways it's off now let's go ahead and get this new stuff on and forget about this all right so we're back under here and slightly off topic but not quite as you can see here in the the Y pipe the manifold a lot of guys I'm not a lot of guys but I've seen before people actually take that and grind that that piece out in the middle and they've gotten gotten some results they said it sounded better and it also gave them a little more throttle response with more pep so you guys are ever thinking about it maybe now is the time to grind that out and clean that up because that is apparently at restriction right there okay so let's go ahead and get this pipe on here basically put your clamps on before and then we'll be all set to put this pipe on here and you're gonna have to play a little bit of a game here because you basically have to make up some length so you probably have to push your muffler and the rest of your exhaust back to get this slipped into here all right so I am NOT impressed so far with this cutie peak it unfortunately I don't know it's just mine but I doubt it I don't know if you guys can see it on the video but they gave me this oblong egg-shaped pipe and it doesn't want to fit over top of my mid pipe going into the muffler so this is the way it sits of Commerce on the vehicle and on my header my manifold it fits okay but it still wasn't the greatest but on this side I've got this kind of egg-shaped pipe and it's not someone if you guys can see it in the video but it's kind of you could probably see right here it's got this peak on it and then it goes flat across this way and it's not not fitting I got this egg-shaped thing so I had to go and waste my time going autozone and picking up this pipe expander kit because I don't have really many tools here where I'm working currently and I'm gonna have to basically spread that open a little bit so that I can actually get it on it was pretty fun driving over to autozone with open headers but that's another story so let's go ahead and spread this open and continue hopefully okay so after using the pipe expander and getting these open up but it looks like we might finally be able to get this on after just doing some quick test fitting so now we got our clamps ready and situated so let's get this pipe on here okay with everything tight the two band clamps and everything aligns hopefully now comes the fun and hopefully as well downhill part of the install which is putting the actual cutout on so hopefully it's straightforward from here guys I'm really hoping because so far it's been a pain but let's keep going alright so of course we're gonna have our cutout we need a gaskets to go between that so we're gonna do gasket cutout gasket and then turn down with everything aligned we can now tight unit all the bolts okay I'm happy to say you guys and all the bolts and hardware is complete now we're just left with the wiring and everything is solid down here so we can go ahead and start doing our wiring and hopefully that's all straightforward okay so now we can start mounting our harness of course this is the harness where it connects so we're gonna connect this here and then continue to run it so I've decided that getting the wire out of harm's way and out of the heats way is the best possible so I am going to immediately flip it over the frame rail and there's actually holes in the frame rails so I just snuck a zip tie through and around and I'm gonna follow all the way along here and up into the engine bay so let's go ahead and get that done just a cool little tip for you guys if you ever see two holes like this or somewhat close together you can actually feed a zip tie or a tie wrap through them pretty easily if you kind of make a u-shape with the tie wrap like so it has a tendency to want to return to that shape so for example at you you hook it in and it should pop through here like so so you can see we easily got it through and we got our tie wrap here we can put our wire into it and continue on okay so we basically just followed that frame rail up and then I tucked it up along with the factory PCM and that stuff out electrical and then I'm just gonna sneak it across here and behind this liner into the cab where I can connect out all this stuff and keep everything watertight okay so we're on the driver side now guys and you're gonna see this big boot over here hopefully and basically this boot here I think it's some better light on it for you guys this boot basically goes straight in the cab you're gonna see this little kind of nipple here that hopefully you can see me moving around put the wire in the way get this out of the way for a second for you guys so see this nipple here that nipple on the bottom there you can chop the end of it off and feed your wires through but this wire is pretty big this is the connection that you have to send through so I'm just gonna make a little incision on the corner of this boot and pass this big piece through and then we can basically put our other power wires through there or get the power friends at the cab but this one here is going to be for this so here's what you'll be looking at underneath the dash it's kind of the perspective or underneath where the pedals are and to the left there is where you can see hopefully where we came through so that's basically our connection there and we can go ahead and mount the watt this little box down here qtp box but I'm gonna go ahead and bring my power wire from the battery I won't have constant power in this so that I can turn it on or off before I start the truck so that's why I'm not gonna do on switch power we're gonna do it always in the battery so I have to build you open or close it before I actually start my truck with constant power so I'm going to go ahead and run this red wire through there and then we should be almost done okay so we'll be mounting the box up here basically there's a void here there's a big hole that you can kind of pass a couple zip ties to and it looks like this is where a clutch pedal would go so there's ton of room here it's not gonna be mounted a box right up here on this kind of piece here piece of metal and again zip tied around so let's go ahead and get that mounted okay and they give you two connections for this wireless remote so it can power two cutouts but we only will be using one but I don't want power coming across here and shorting out on something so I'm gonna go ahead and electrical tape around it to basically protect it from shorting on anything okay so we're all done in here I mean there's not too much to it guys basically you're gonna have your positive your negative the extra wire is gonna connect to your cutout and this white one is just an antenna so you can kind of just let it free flow it a little bit and get some reception we hope so that's basically it I think this is a clean install putting it up here and we got our wiring it's out of the way it's not gonna dangle and interfere with the pedals or anything and we can still easily access it or the fuse if we need to I'm also probably gonna put another fuse on the other end this is what comes on it standard they put the fuse on this end so I'm not gonna chop this wire any shorter I'll leave this here but I'll probably put a fuse on the other side of things closer to the battery just in case for whatever reason if the wire shorts along the way so that's basically it under here let's go ahead and wrap up up top so this is the finished install guys basically under here you have the red wire you just put it onto this 10ml post very straightforward and here's your wires running in it's all like I'm saying nothing too complicated and the excess wire that runs to the cutout I just tucked in behind this insulation and the firewall and like I said you guys before basically the wire that runs to the cutout just runs between the insulation the firewall all the way across then it runs down and then it runs across that frame rail so very basic very simple last but certainly not least I'm going to be programming these overhead buttons to basically mimic the remote that they give you the Wireless remotes so they have open on the left and closed on the right so I'm gonna mimic my first two buttons on the overhead the same so basically if you guys haven't already done it to train it if you touch one of these buttons you're gonna see in the - it says channel 1 training so basically what I have to do and I'm gonna put the camera down for a second to do this but I need two hands is I gonna be holding down the button and holding down this button at the same time until basically it says that it's learned over here so let's go ahead and do that so we're gonna push these both at the same time it says channel in training channel one trained so now this should work and it does and we're gonna train the second button so channel two training we're gonna hold this one channel two train so now this both works I can hear the motor turning okay so work seemed as remote perfect guys these two buttons I got open here close there and I don't have to necessarily have this remote on me with when I'm in the vehicle but if I obviously want to open it closer from outside then this is where this is gonna come in handy and I'm sure the million dollar question for you guys is how does it operate so this is a remote of course and I chose to make it so that the you didn't have to have the truck on for the remote to work and I basically wired it straight to the battery and like I said the reason I did that is so that you can actually open and close it with the truck off before you start it so for if there's any reason that you wanted to do remotely before you enter the truck you could open and close it so let me go ahead and show you guys what it looks like externally and how that valve operates okay here we are into the truck you can see that it's closed right now if I take the remote hit the open button you're gonna see it open of course now it's fully open hit the close button again and then it's closed so I'm gonna go ahead and go up top so I do promise guys that I'm gonna get you some more sound clips but I'm working on trying to find out how to get the audio to fully capture the sound and the thing because the camera doesn't seem to want to pick it up too well but this is the truck running with the stock exhaust and with the flap closed and if I hit open hopefully you guys can hear how much different it sounds but again I don't think it fully captures it but that's a that's it open and then if I switch it back to closed there now we're back to bone stock can't hear anything but again like I said guys I'm gonna make it another video or more videos a lot more videos poles drive-bys all that stuff on the exhaust so that you guys should hear it a little bit better okay so that just about wraps up this video guys like I said I'm gonna be doing lots of reviews on the actual sound of this thing drive-bys poles you know standing next to it but I got to figure out the audio as far as capturing it right now I'm not sure if you guys can fully hear trucks running right now with the stock exhaust and the cutout is closed and if I sit there and I actually program these buttons like I showed you guys if I actually push this to open it I know if you guys can hear the change in pitch but basically now it's open and if I rev it I'm sure you guys can probably hear it as opposed to closing it now it's fully closed and if I rev it can barely hear it so you just hear the intake sound in the stock exhaust so as always guys thank you so much for watching this video if you did find it helpful you liked it make sure you give it a thumbs up for me also if you haven't already subscribed make sure to subscribe for me and hit that Bell notification that's beside the subscribe button so you informed on all the latest videos as far as this set up it was a pain to install I mean of course there's always more difficult things install I'm not saying was the end of the world but I was of the presumption that was gonna be pretty simple to just bolt up and you know kind of go from there I didn't think I was gonna run back forth between the hardware store or the autozone store and get some stuff and supplies and and kind of tailor it to work so but with that being said overall I'm absolutely you know thrilled with this setup so I love being able to just turn the sound off turn the sound on and I can adjust when I want my truck to be loud and quiet and I think it's a perfect setup for these trucks so let me know if you guys have any questions on the setup in the comments below I'll be sure to answer them and like I said I'm gonna be doing a lot more videos on this setup so you know don't don't be afraid or disappointed if there's not too much sound quality or some whatnot in this video or comparisons cuz I'm gonna be doing tons of comparisons on the setup but I just want to dedicate this video to that actual install and what was involved in putting it on so again guys thanks for your support so far check out all the other videos on channel and we'll see you next video take care

Please explain how to clean your engine bay !!! easy tutorial !

hey what's up guys welcome to another episode of pan view organizer on today's show we're gonna do a complete engine bay detail so I'm gonna teach you how to do this the simple and easy way you're gonna see all the tools equipment and products that you need to do a good job and here for the demo vehicle we have an SUV that has over 63,000 miles on it or 100,000 kilometers it's a daily driver and the engine bay has never been detailed so let's go ahead and start the show so hey guys I'm pan welcome back to all my regular viewers and for all of you for whom it's the first time that you watch one of my videos I highly recommend that you click the subscribe button that way you'll subscribe to my channel and never miss my future videos so today we're gonna talk about how to do a proper engine bay detail it's not that complicated if you know what you're doing so in my over 20 years of car detailing experience I've learned lots of tips and tricks that I'm gonna pass on to you guys so first of all the demo vehicle today is a Mazda cx-5 SUV it's a 2014 model has over 63,000 miles on it or 100,000 kilometres it's a daily driver it's been through our harsh Canadian winters so you can imagine how that must be as you can see the engine is super dirty super greasy so we're gonna hit go ahead and take care of all of this first of all let me start by introducing what products we're gonna need it's super simple essentially I have a selection of two degreasers that I like so super-clean which I diluted three to one in a spray bottle we have the classic McGuire's super degreaser which I diluted four to one we have a spray shine and protection for the end to give it that nicely detailed look from Chemical Guys black on black we have an air blower so in this case the metro vac air force blaster sidekick I also have the bigger brother the metro vac master blaster revolution so we have the easy detail brush to get into the nooks and crannies we have this wheel and lug nut brush we have these mothers brushes so flag tip again super gentle this bigger one is for the fenders but great for reaching areas such as the hood and of course we have a microfiber towel so that's pretty much all you need and by the way I'll link all the products and equipment in the description down below for you guys to check them out so before we go ahead and start doing the work let me give you some important tips first of all if you can do the work in a garage or if you have to do it outside choose a cloudy day like today which is perfect because you don't want the Sun drying the products while you're using them also make sure that you do the work on a cold engine bay or slightly hot if you just drove your vehicle let the engine bay cool down for at least an hour before doing the work because again you don't want your products to dry up while you're using them that's super important if you have some fragile items or some delicate electronics you want to cover those up with a plastic bag same thing if you have a modified vehicle with maybe a cold air intake you want to cover the filter up because you're gonna be using water in the engine bay I personally use a garden hose to spray but you can also use a pressure washer if you want just keep the setting on low because you don't want to directly add pressure to any of the electronics in there by the way guys I know many out there might be scared to do an engine bay detail but there are no worries to be had if your car is less than 10 years old manufacturers already make engine Bay's waterproof and watertight as much as possible but in this case it's a fairly new vehicle everything is pretty much protected so we're not going to overthink the moment first step we're gonna start with the hood as you always want to work from the top to the bottom so you're gonna take your degreaser and you're gonna spray it liberally all over and you're gonna let the product dwell for a couple of minutes I don't take care of the heat shield because you don't want to get this soaking wet as it might add a lot of weight to it and who knows what might happen so try to avoid this area by the way a quick tip you always want to do your engine bay detail before you wash your car because if there's any overspray or stuff that goes onto the paint you'll want to wash that off afterwards okay so now we're going to start to brush all of this using our fender well brush again guys we're not looking for museum quality engine bay detail we're looking to just improve the looks of this this is a daily driver so we're not gonna go overboard just do a good job and it'll look a hundred times better okay so it's time to rinse it off okay for the engine bay we're going to hold it off to remove the loose dirt and grime and dust okay so now my super clean degreaser and sprayed on liberally you right we're going to start brushing with a flag toothbrush just get in there [Applause] all right so before we go in closer I always recommend that you guys wear some gloves protective gloves because we're dealing with chemicals it's not we're gonna use a shorter brush to go closer and more into detail so we're gonna take a lug nut brush put a bit of degreaser in there you can go more into detail some nice foaming action you okay guys we're now ready to rinse the engine bay off okay guys so now that we've properly degreased and rinsed the engine bay it's very important that we dry it off as quickly as possible so you have two options either use some microfiber towels to dry off the engine bay or again you can use these air dryers so in this case the metro vac air force blaster sidekick which I've also done a review on on my channel so this is basically an air blower you'll get into all the nooks and crannies and free your engine bay of any residual water so that's super important in my case I'm going to use its bigger brother the master blaster revolution [Applause] all right so now that the engine bay is clean and dry we're gonna add a detailer and protectant for plastic trims so this one is the Chemical Guys black on black but I'll link some recommendations in the description down below so you essentially just spray it on so don't be shy spray it liberally on every part and component in the engine bay this will give it that nicely detailed look and when we're done we're gonna buff it off with a microfiber towel so this will give not only a nice matte finish in the end but will also give a bit of protection onto your plastic trims prevent them from fading now you take your microfiber cloth or a towel and you buff off to reveal a nice finish and that's it guys we have a nicely finished and detailed engine bay look how much cleaner this looks obviously again I just want to remind you that we're not looking for a concours or museum level engine detail this is a daily driver but we brought this from a very dirty and greasy engine bay to this nicely finished results so again it looks just a thousand times better all right guys so now for the moment of truth we're gonna start this baby up so again you saw how easy this was it's not complicated when you have all the right tips and tricks by the way I'll leave all the links to the tools equipment and products that were used in this video I'll drop them in the description down below for you guys to check them out and again I remind you always do this in a garage or on a cloudy day never under the Sun you start with the hood so working your way from the top to the bottom you spray your degreaser on liberally you let it act and dwell for a couple of minutes you then brush it off you rinse it off same thing for the engine bay you spray your degreaser liberally you let it dwell for a couple of minutes you use a couple of different brushes to get into all the nooks and crannies you rinse it off using your garden hose or if you want a pressure washer at a low setting once it's all properly rinsed off you want to dry it off so either with a microfiber towel or with the air blowers that I showed from metro vac and once all that's done if you want to give it that nicely detailed touch you're gonna use a spray detailer to protect the trim and also give it a bit of a matte shine so semi-gloss look so it looks great and you guys will be able to do the same at home so guys I hope you enjoyed the video as usual if you liked it smash the thumbs up button also if you like my content take a second and make sure that you click the subscribe button that's under this video that way you'll subscribe to my channel and never miss my future videos so guys thanks for watching thanks for being there and in the meantime don't forget keep it tight keep it clean and I'll see you on the next one [Applause] [Applause]

Please explain how to make bacalao - puerto rican bacalao

best fight forever hi I'm chef Alisha and today I'm making bacalao with my father-in-law Orlando yummy buckle Oh preparado masala Rito Yama typical la jolla Puerto Rico que el Baca la Mesita when a wave of doors om o preparado con la siguiente fedora con yuca malanga LT agony offensive wakati button is rootin I'm starting off here with two pounds of bacalao which is salted cod fish and you have to soak this overnight and change the water a couple of times and I have two pounds here but a pound and a half is going to be for my bacalao and one half pound is going to be for baccala ethos so here I have my veggies I have a yuca yo kiya taro root this is a purple yam and I'm going to use two of those and then you can either use red or a white onion that's gonna be your choice also get some salt water boiling on the stove the first thing that I'm going to deal with is my yuca I'm just gonna trim off the ends peel it and remove that root that is inside if you don't know how to do that pop over to my video and watch it and then you'll know how put those into that salted water the next thing that I'm going to do is cut up my taro root so I'm just going to remove the edges and the ends that have been exposed to air because they get a little bit dry cut it into more manageable pieces peel it and then slice it up and that is also going to go into the water after that I'm going to move on to my gal kiya here I have ult Aniela and I'm just going to trim off the ends cut it in two pieces and then into the pot it goes next I'm going to do my purple yam again this is not traditional but it is very yummy and very beautiful it also has a nice sweet flavor which I like in my buckle ow so I'm going to peel it cut it into pieces and add it into the pot of salted water now I'm going to get going on the stove a dozen eggs along with some water which I'm going to simmer bacalao and so I'm going to bring that front pot up to a simmer not a boil a simmer add the fish and simmer that for 15 minutes while that's cooking I'm going to take some green bananas and trim off the end and then just take them and take off both ends slice it down the side and then slice it down the other side and put it into a bowl or a pot of hot water this pot is not turned on it's just very hot water this is going to make it a lot easier to remove those peels because otherwise they're pretty difficult to take off and then just use the tip of your knife and take them off and into the pot they go so 15 minutes has passed and our fish is done simmering so we're going to remove that the fish has a nice natural separation that you can just kind of follow when you're breaking it apart into pieces so break your fish apart into pieces following that nice natural separation also if you come across any of this kind of white skin on it just take a spoon and scrape it off it won't hurt you if you eat it so don't worry about it but if you want to remove it you can just use a spoon the next thing that we're going to do is remove our vegetables which are done cooking over in the pot and just test them as you're pulling them out and make sure that they're done okay now back over to our meat we're putting a pound and a half in one bowl and a half a pound and the other and that extra half a pound we're going to use for baccala Ethos and we're just adding some olive oil into the one we're using for the bacalao about a cup next I'm going to chop up one red onion and I'm going to slice this super super thin when I'm doing it and again that's up to you you can make it as thin or thick as you want add it into the bowl with the fish and the olive oil and I don't like to use a spoon here I like to use my hands just because it's kind of more gentle to mix it the next thing you're going to do is place it into a serving dish and just kind of move it around and make it all pretty put your boiled eggs there by the way there's also a video for boiling perfect boiled eggs if you don't know how put a little bit of fresh black pepper or some sea salt and then we're just going to garnish with a little bit of chopped cilantro so chop up some beautiful fresh cilantro by just putting it into a neat little pile and chopping through it and then just go over it once or twice with your knife I am going to sprinkle that over my beautiful plate up here and then I'm just going to put the vegetables and choose some bowls next to it and serve it if you would like this or any of my recipes please visit best bites forever.com or check out my youtube channel thank you so much for watching and happy cooking everyone back bite for and Virg dot-com

Please explain how to: rev match downshift manual transmission in 4 steps

so today we're going to learn our rev-match downshifting and i think this is a skill that everyone who drives a stick-shift tional unfortunately it can be a little tricky to understand especially if you are new to driving stick shift so what I'm going to do is break it down into two steps we're going to learn the rev-match first then we're going to add the downshift along with the rev-match then we're going to blend them both together to get a very quick Rev match downshift that is very useful and you can use it every day you drive stick on the street or on the highway you should already be comfortable with driving a stick shift and down shifting going from say 4 to 3 and just smoothly letting out your clutch and comfortable with your pedals so this is something you can learn on the street and the perfect speed is around 50 kilometers an hour the perfect gears are from 4 to 3 and 5 to 4 you can practice that after you got good at 4 to 3 at the end of the video I am using a 5 to 4 so you can see that so now we're going to learn the rev matching and for this you're just going to put it in 4th gear and try to keep your speed around 50 kilometres an hour and all you are doing is using your gas and clutch you are not shifting at all so it won't touch your shifter just put your hands on your wheel and all you're doing is clutching in topping your gas and clutching out if you do it correctly the car will stay at a steady speed if you let out the clutch too early the car will try to accelerate and if you let it out too late you will probably feel a bit of a jerky feeling and the car will try to break on you this is something you gotta practice over and over to get comfortable with your clutch release and your topping of the gas the top of the gas is just a good hard top you don't stay steady gas and you don't rub it up and down just a good hard slap of the pedal and you're off so you can see in the video that is just a good hard top you're going to press your clutch to the floor give your gas a hard top and bring your clutch show when the RPMs climb you bring your clutch out not before and not after so clutch in top clutch Oh clutch in top foot show fortune tabloid show gasps off clutching top gear gasps clutch Oh gasps off clutching top your gasps clutch Oh give it a good hard top gas off pledge in top your gas clutch Oh gasps off clutching tap your gas clutch Oh gasps off clutching top your gas clutch Oh gasps off clutching tap your gas clutch out gasps soft clutching top kyrgyz clutch Oh so now we're going to add the actual downshift with the Rev match so how this works is gasps our clutch in downshift top your gas clutch out let's do it again put it back into four keep your hand on the shifter to reduce the time it takes from moving your hand so gas off clutch in downshift the third top your gas clutch Oh we'll put it back into four gasps aw clutch in downshifted third top your gas clutch Oh put it back into for gas off clutch in downshift top your gas clutch Oh after you're comfortable doing those shifts smoothly without missing any shifts or confusing yourself with what is going on with your feet now you can try doing the downshift when you clutch in so we're in fourth gear now gasps off clutch in top your gas flood show let's put it back and fourth gear gasps off clutching in downshift tap your gas clutch Oh put it back in 4th gear gasps off clutching it downshift tap your gas clutch Oh get back on your gas put it back and fourth gear gasps off clutching tap your gas clutch Oh put it back in fourth gear gasps off clutching tap your gas clutch Oh so here we are fifth gear gasps off clutching downshift top your gas clutch oh let's see that again gas off tap your gas clutch Oh again gasps off question top your gas watch Oh four to three gasps off clutching top your gas clutch Oh so up until this point you've been doing the downshift very slowly and steps just so you get comfortable and what you need to do in what order you with your petals and your shifter and so now we're going to blend them all together so you get a quicker downshift and something we're useful you can use all the time so what we've been doing is gasps aw clutch goes in and your downshifting at the same time you're topping your gas and the clutch is coming out so now we're going to tap the gas as soon as the clutch goes in so the clutch is going to go in you're going to wait a breath a blink of an eye a quarter of a second just a small second just small amount of time then you're going to tap your gas and then the clutch is going to come remember when the clutch goes in your apportioning your downshift at the same time so here is an example where we would use a wrap match downshift we're behind this truck and I want to pass I want to use fourth gear I'm not going to pass the truck this time I'm just going to do the fourth gear so gas off clutch in top gas clutch Oh so let's see that again hand on the shifter gasps aw clutch it top gas clutch Oh let's do it again hand on the shifter gasps aw watching chopped gasps closed shell again paint on your shifter gas off clutch in top gas clutch oh that's it the past downshift rev match so let's put it to use in we will pass this truck of course see there's a little bit of traffic beside me but let's see if I can get some space so handle the shifter downshift our point now I have a lot of more torque to pass this truck fifth gear and either go back to the right lane or keep continuing you so a tip with doing the downshift any kind of downshift is put your hand off the shifter before you do anything so if you know you want to downshift to Ford put your hand on the shifter before you touch your clutch you touch your gas because if you pressing your clutch and then move your hand from the steering wheel to the shifter it's just going to add amount of time which you don't want you want to be ready just to do the maneuver the shifter gasps soft plushy what you you here's how to rub match suck it just go slow do your downshift make your turn top your gas and go you don't always have to do a quick grab match into second so here we're going to make a left break put it in second start to turn top your gas let it your clutch and go

Please explain how to cook fish (trout/kokanee) with out filleting | dinghy fishing northwest.

hey guys James here gonna show you how I prefer to clean and cook trout and kokanee if I'm not going to fillet them this is a really great easy way to cook and prepare them so as you can see already had the fish descale and cleaned the heads off then all you do is you take the fish and kind of laid out and we're going to butterfly the fish open so if you want to cut it right down next to the rib bone there's some really nice kokanee that i caught today from Odell things cut really nice alright see how we kind of opened it up there from the rib bone we're gonna go ahead and get this on the cooker and we'll show you the next stage as we get it into the frying pan from here I'm just going to coat it in flour a little bit of salt a little bit of pepper that's it alright this is what it looks like with the flour salt and pepper on it we have a frying pan right over here all set to drop the fish on and you just want to brown it really nicely cooked just a little while on each side to make sure it's on the bottom side before you flip it all right at this point we're just about ready to tape it off the frying pan and once you get out of the Frank and I'll show you exactly how this works I kind of explain what will be here before I do so now with the ribcage split from those ribs the ribs on the left side here will actually completely lift cleanly and freely so we have a whole bunch of the phone let's meet our relief - I'll show you all right when you're at this point you're ready to just go ahead and maneuver like so you'll grab the ribs like this and just pull straight up look at all that wonderful meat underneath now you can eat this it's all boneless a great way to go alright guys well that's about it as far as eating a cone kokanee or a trout hope you enjoyed

Please explain how to get an anthurium to bloom

hi this is yolanda vanveen and in this segment we're going to talk about how to get an theorems to bloom well if you have an indoor garden you'll notice a lot of plants it's hard to get them to bloom well the reason is that they don't get enough full full light they needed a lot of light so you have to add artificial light or give them enough heat so the materials that you will need are and the thorium plants and either growing right into volcano volcano crock or you can put it right into soil itself and for the census I need a container with some rocks and water and a full sunny window first step always make sure that your anthurium gets enough water because if they dry out a lot of times they'll die back but they've got to keep pretty moist all the time and so that's the key to getting good blooms is make sure they're moist and they don't dry out next up place your anthurium in a full sunny window you want to be careful that it's not late afternoon Sun where it might be too hot and fry it but midday is also good artificial light is also very very good because it'll give it enough light so there's really nothing you can do to make your anthurium bloom it really needs enough light and a good roots bound it has to be a good set of roots that has to be established plant before it gives you any blooms you can add some blooming fertilizer high in phosphates not in nitrogen because that's the greenery sometimes that helps too but in the end it comes down to enough hours of light and enough intense light for it to bloom and then that way you can enjoy your little boy flowers

Please explain how to make manicotti - baked manicotti recipe

what's up everybody this is Lyle with no hippie BBQ and I'm here with my girl Helen I don't know if she was a former hippier now but she looks kind of like she was a hippie back in the days so hey salad root boy it cooks you know I'm giving love to everybody this matter of fact I do love everybody anyway this is Helen she's gonna be knocking out some of this manicotti today so what's up Ellen hey and it's not manicotti the river word in Italian is Monica yeah whatever happens called manicotti we're gonna be using some of this mozzarella cheese what's that called with Sorrell mousse well anyway she's a Jewish lady this is trying to be Italian but anyway we're gonna go ahead and and ricotta cheese you have to use good ricotta cheese is that good yes and that's called scoops who said Jewish people can't cook Italian food what about to get down to this we're gonna get into these ingredients in just a second buddy what's up with this wait before you do that Helen said Lila know you're coming over so I want to buy you some so I said okay and she knocked out some of that so anybody standing I won't drink expensive and let's not have me over their house wait tell us what we got going what we're gonna make a very very simple recipe for it's called Monica manicotti I use generally I'll make my own sauce from scratch but most people find it easier to just use the box stuff so what my favorite is the Barilla and I like the basic one where it's just that Vasil then i put it in a pot and i doctor it up with a little bit of olive oil and extra seasoning and i just let it simmer I have hot for salted water and don't put any kind of oil in the water some people do that it makes it nasty when you go to stuff them the shells that's a good tip right there what up what are their ingredients you get okay pepper garlic the mood Sorella cheese which we like I like to do the this kind and shred it so that it's more moist salt olive oil Parmesan cheese and ricotta always use the better cheese's because that's the main ingredient other than the noodles so you want to use the best to make it taste better and I like either Barilla my favorite is the Barilla pasta DeCecco if you can find it is the Cadillac of pastas and this is limes and those are the basic ingredients that's it we've got a little flat leaf parsley about as well at least yep some people like to like parsley the Italians make it with they mix some chopped up Italian parsley in with the cheese to me it makes no difference I don't find where it changes the flavor much so none of that's gonna make it in there no just into your stomach all right Helen well we're gonna go ahead and get this cheese write it up and just do a few other things we're gonna start the water that has to be boiling and the sauce we're just gonna start to simmer it and I thought my casserole dish to put the manicotti and the noodles in and that's it we're ready to rock and roll so I'm gonna start heating up the sauce all right Helen will you go ahead I'm gonna go ahead and knock out a little this Steiger I'm seven and and you can all right well I'll do the cheese in the sticking up seven okay so we've got the salt water coming and we've got the sauce I add into the sauce you should always had a little bit of sugar because it takes the harshness out of the tomatoes and for this kind of cooking you wanted just a little bit on the sweet side and then I like to put in crushed peppers to give it a little tang now what consistency do you want that sauce to be I the sauce should not be real real thick you should I take it should be thinner than paint pink huh yeah like a bucket of paint a little thinner than that thinner than a cake batter and you'll see when I start to do it I always put a little bit of water into the sauce to thin it out but you don't want any kind of sauces like Marineris because they're they're lumpy basically it all has the same ingredients so that's the best is you wanted us as smooth as possible okay so we have our parsley diced up thanks to Lyle we've got our mozzarella cheese and now we're gonna do our ricotta and I like to use the regular whole ricotta not the skip Italians don't use skip let's taste it just to see oh it's very fresh and that's what you want now for each pound of ricotta cheese you want to X because it makes it creamier and you want it creamy not thick so we're gonna okay this camera might get a little shaky because I got a come over here okay pack the drink okay go ahead okay I'm just gonna beat up against a little bit I'm very old-fashioned I'm not a gadget person so I just use whatever I have on hand okay I'm gonna add the seasoning some salt I don't measure anything some pepper this is no hippie BBQ you might want to roll with a lot of that pepper well I like to put it in the egg so because it mixes a lot better when you're mixing it all together and garlic you can't use too much garlic yeah you can cuz I smell like I need to be taking telemarketing calls if I eat so much garlic if you know what I mean I know what you not that date just like I love hippies I love Hindus Muslims you know Jews you know Democrats most Republicans you know what I'm all over the board I love everybody okay now we're going to add this to the ricotta cheese and we're gonna mix that really this is also the basics first you can use this combinate this cheese mixture for lasagnas that shells rigatoni it's a very very basic Italian recipe and it's also I remain a stir earth like grief what have you so what are you doing with that parsley over there that's the last thing oh okay okay so this is all mix really really good and you always want to taste it tastes pretty darn good I think it needs a little bit more salt you don't want to add where it tastes like salt but you want it to be flavored like salt if that makes any sense that doesn't make any sense but I think they get the point okay you just don't want to overdo it with salt okay you want to stick your finger in there no he's already got the food police on me on my bacon video talk trying to trying to get me about licking my fingers but you know there's no hippie BBQ but you know try to appease everybody but you know we're gonna be no hippie I'm gonna go ahead and mmm that's some good let's roll no making a brother hungry come on ricotta cheese you use approximately one and a half cups of mousse real or mozzarella yeah for us the line oh you need if you're gonna do Italian cooking you need to learn the real words I think I need to learn some Jamaican food as a matter of fact I got that Jamaican Jerk video I need to get up didn't come out as good as I wanted but I did learn how to speak a little Jamaican a long way yeah tell me some more what's a pretty girl like you cryin joke okay so you wanted about like this so now it's nice and thick and I think we've got enough of the cheese does that look like I added about three cups laughs oh yeah close enough yeah finish eating this cheese that's really good okay now I'm going to add some Parmesan cheese I just used whatever time I don't buy the store grand but I don't use the mixture of Romano just get the plain old parmesan and you mix them in and then give us a little bit of a zest so what are we doing after we mix this stuff up okay we're going to and I want to just taste it the mozzarella makes it real creamy oh is that killer okay and we're gonna just tossed in it mix in some parsley and try and do don't put stems in with the parsley you just want the tops and just chop it up fine all right we're going to finish mixing this okay now we're gonna put our noodles into the water and we will pick it up once these noodles are cooked oh yeah let's take a look at this sauce but it looks like some good sauce so actually I'm gonna go ahead and let her get these noodles cooked and everything and we will pick it up then a little bit of sauce at the bottom of the pan that Hill is gonna tell us how she cooked these noodles okay you cook the noodles in salted water until they're a little less than half done you want them to still be on the harder side because they're gonna bake and you don't want them to disintegrate in their heart to fill but you want to put enough sauce on the bottom to cover it maybe an eighth of an inch okay so Helen didn't have a piping bag so we're going to use a no hippie way to fill these fill these and it works noodles boom we got like a ziploc bag with our egg stuff in there so we're just gonna wait we're just gonna squeeze that in there hold about the opposite side you may have to push down a little bit with your finger because you want to put as much cheese in as you possibly can okay then you turn it over to the other side and you do the same thing and this site won't need us much lime okay perfect later in there so we're gonna we're gonna keep doing this we're gonna finish this up and get this pan finished and then we're gonna pre-heat your oven to 350 middle rack how long were you on bake it for just we could um it's yogi a little bit on the brown side probably about 30 minutes all right so we're gonna pick it up what our next step is got them all filled and we're just gonna pour it sauce over the top and they will finish cooking you don't want to over stuff the tops with sauce because then it'll taste like spaghetti you don't want that you want it to taste like Monica so is it ready to go in love enough it's so we got it three 300 preheat your oven to 350 medium shelf and it'll take about 30 minutes for this amount with this right here here we go she got she had a salad Rudeboy cook she had to get a little hippie on this and throw a little salad over here for no damn reason at all but there you go so uh go ahead and give us that taste test all right you know let's let me see this right quick you're over here tell me some stuff I can't even tell so and when you're serving it don't let it cool down just get it on a place and this it comes out of the oven see how the noodles cluck that's some good right there I know hippie BBQ my brother got a chance to get his eat on right quick and uh this is some good stuff here some will be making more good dishes so get on the site you want and see what we do nobody that comment subscribe if you worked if you're wondering why call there's no TV BBQ look at my first video where I explain it's out from the rib boys cooks you it see you later

Please explain how to remove nail polish from your carpet

hi I'm Annette Hayward I'm Radio 5 Live's cleaning expert and I'm here today to help you get the best of green cleaning out of your household products now we're going to show you how to remove nail polish from your carpet use ordinary nail polish remover okay and a white tissue so now varnish a polish remover on there always dab never rub so go into the pile you can see the nail varnish is quite happily transferring onto the tissue there and keep repeating the process until there's no more transfer onto the tissue I just gently dab away as you see the nail varnish is getting fainter now varnish is quite happily coming off there you can see it's getting fainter with another product you can buy as you get near to the end of this process which is called white wizard and it's a white paste and that will continue to break down the compound of the nail polish another thing that you can use once you've got most of it out is good old hairspray so just spray on on the Polish there that's left and in the same way down your white tissue they'll see that's now transferring onto the tissue away from the car fit just continue to do that until it's all gone may take about five minutes of keep repeating the process and then we are how to remove nail polish from your carpet

Please explain how to: lalaloopsy hairbow tutorial | cinder slippers scoops waffle cone crazy hair

hey guys as you can tell I've got a few friends joining me for the video today I've got all of the Lalaloopsy girls and as you can tell we are quite obsessed with Lalaloopsy in this house right now we are collecting all of the Lalaloopsy girls which you see the majority of here I think we are missing a couple in the photo but we do have all of the Lalaloopsy girls the only two that we're missing are they new - two of the new crazy hair Lalaloopsy girls these right here are the crazy hair Kennedy also put these little babies in here it's so adorable but if you stick around at the end of the video I will give you a just a quick review of these two girls right here the newest ones but yeah we are quiet consumed with Lalaloopsy here and we are doing a Lalaloopsy hair clip tutorial today and this is jewel sparkles she is one of the more popular Lalaloopsy girls but there's sparkles we are going to put her on a hair clip so you can wear any time you want to sparkles okay and the supplies that we are working with I am using some felt circles I have got a couple of cream color circles I've got a couple of pink and I've got a little bit of black now these measure around two inches in width I'm also using small black buttons you'll need the small ones for the eyes I'm using a one inch at the bottle cap I've got a few strands of cork or ribbon and it's being shown to you on the dowels all I have to do is remove it from the dowels and trim it you'll also need a little bit of hot pink you'll need your black thread a needle your scissors and of course your clip okay like I said I'm using a few strands of Corker ribbon if you need the complete tutorial I'm going to leave down below in the descriptions box but pretty much all you do is rap 3/8 inch ribbon around a wooden dowel attach clothes pins wet the ribbon and place it in the oven on about 275 for 20 minutes allow it to cool and then when you remove it you have court ribbon Corker not court alright let me just show you really quick and I'm using a light pink color this is for jewel sparkles hair see Corker ribbon alright very simple so I'm just going to use probably two strands but I went ahead and did three just to be safe okay so I've got that Corker ribbon ready I'm just going to set it to the side and we are going to work on jewel sparkles face now I'm going to be using the two cream color felt circles and again these measure right at two inches I'm also going to be using a pink felt circle and this is going to be for the top of her head and the top part of her hair you'll also need two little black buttons and these are pretty small they actually came in a pack with white buttons they didn't have one with just black so I got this but you'll need two of those I'm also working with a black thread this is upholestry thread it holds up fairly well and you'll need a needle and this is for sewing the button eyes on double space I'm going to take my pink felt circle and I'm just going to fold it in half and I'm going to cut right down the middle just like that because I'll need that flat side and the round side now I'm going to take my glue gun and I'm just going to glue the pink felt right here to the cream felt just like this and see it's gonna leave the little bangs hairline right there alright so go ahead and glue these two pieces together okay now what we're going to do is we're just going to glue our two black button eyes on and I've already threaded my needle and all of that good stuff so now I'm just going to attach my eyeballs okay now that I have added the button eyes I'm going to take a little bit of black felt and I just cut it in these tiny strips and I'm going to make little eyelashes for her eyes right here at the side all I'm gonna do is make like a little V cut like is like if you were making a hair bow when we do the spikes on the hair bow I'm just gonna do a little V cut at the corners of the black felt and it looks like that I don't know if you could see it it's so tiny and it's felt so I'm not going to worry about it fraying and I'm just gonna snip it and then glue it right here under the side of one of the buttons and it'll just give it a little more detail over here like little eyelashes right there okay now for the next part this is up to you whether you want to do it this way or another way but I've taken some of the the remaining pink felt and I have just clipped out teeny tiny circles they are not perfect but these are going to be for her cheeks now you can also take a pencil and dip the eraser in a little bit of pink paint and then apply it to her cheeks if you want you'll have to let that dry but I'm just going to be applying my little felt circles for the cheeks because that's what I'm going to do you okay so I went ahead and trimmed three pieces of my corker ribbon to measuring the exact same size and one being slightly smaller in size I'm going to say I've got two there are three and a half inches and one that is about two to two and a half inches all right so that's gonna be for the hair I'm also going to be taking my bottle cap and I'm going to be gluing my Lalaloopsy head to the back of this bottle cap this is totally optional I just do it for added weight all right so I'm just gonna glue it right to the back of this flattened bottle cap now I'm going to take that second piece of felt and I'm going to glue it to the back of my bottle cap here however I'm not going to make them completely the same like this I'm going to stagger this one because I want some of it showing at the top like that I want it's showing from behind so I'm going to glue it like that just stagger it just push it up just a little bit okay now I'm going to take my first piece of cork or ribbon one of the larger pieces and I'm going to glue it right here along the pink line right at the top of her bangs right here it's gonna go around just like that if that makes sense now I'm gonna take the second large piece and I'm going to glue it right above this piece that I just glued down and it's going to be touching this piece of felt that we staggered here at the top now do you see why I put that up there we need a little height right up here okay and you guys know what to do with the last piece it's gonna go right here on top and this is the smaller piece you can take your scissors and give jewel sparkles a little trim because she is looking pretty raggedy right now okay and now we are going to go ahead and make jewel sparkles crown and I'm using this hot pink 3/8 inch ribbon you'll probably want to use a shocking pink 3/8 inch ribbon but of course I'm moving and everything it's being packed up and I cannot find my shocking pink so we are going to compromise with a little dark hot pink okay okay moving right along okay now that make jewel sparkles crown I'm going to take two pieces of 3/8 inch ribbon both of these measures about two inches in length I am going to glue the ends together just a little bit of hot glue to form circles just like so we want circles we want two circles just like this okay now I'm going to take my circle and see that line the crease right there where we formed the two ends together I'm going to press that right in the middle all the way down just like this we're going to flatten it out and then I am going to fold the entire piece like a V see like a V and I'm going to add a little bit of glue right here in the middle so the two pieces stay together you just want it at the bottom of this D right in the middle down here see just like that all right now I'm going to take the two pieces and we are going to glue them together and they're going to look like this when we are complete looks like a little crown all right so just a little glue right here on the side and sandwich those little puppies together okay guys the only thing missing is her cute little stitched on mouth which you can do one of two ways if you have a Sharpie or a marker you can just stitch right here with a black sharpie or a marker or you can sew her little mouth on with a needle and thread okay and when you have finished jewel sparkles cute little mouth you can add it directly to a lined alligator clip or the clip of your choosing or you can add her to the middle of a boutique style bow because you all you have to do is add just a little bit of glue and press her down in the middle but she is now complete alright guys but that's gonna wrap it up for this Lalaloopsy tutorial if you do decide to make your own lo a loop c-clip please visit the Facebook page and leave me a photo because I would love to see what you come up with and I will see you guys in tomorrow's video alright these are from the crazy hair collection they are Lalaloopsy girls we've got cinder slippers over here and scoops waffle cone now the difference in these dolls and the regular Lalaloopsy girls dolls is the hair let's talk about the hair the hair is actually like a wax-covered yarn and it's really I feeling I know why they make it like this it's because you can it's easy to style I mean you you can curl it and it'll hold its shape it just feels pretty odd to me let me show you the Lalaloopsy girls hair right here it's a plastic type you can pull on it and curls but this is the normal Lalaloopsy girl right here get your arm down girl but yeah this is the hair for the normal Lalaloopsy girl and this is the hair for the crazy hair see it's yarn but in with the regular strands of yarn this is a regular strand of yarn then we have the wax-covered yarn right here and it's just see how stiff it is but you can bend it and curl it and cut it and make the hair crazy so I guess that's why they call it cruise you hear all right but this is cinder slippers she is pretty cute she's got a pretty party dress on look at her shoes they're clear like glass slippers adorable and they have pink bows hello we love bows alright that is cinder slippers right there and here is scoops waffle cone and she is my favorite from these two just because she looks like a ice cream sundae look at her hair alright so but you can see the hair is stiff and it just feels it feels weird when we first got them it was more sticky than it is now see but you can curl it and it'll hold its shape see that's weird crazy hair all right but this is scoops of scoops this is scoops waffle cone she's wearing a super cute dress and here's her shoes look like they remind me of mint chocolate chip ice cream and she has a cute little bow let's turn around there is the crazy hair alright so each girl came with a pack of additional hair pieces like here and they also came with a curling iron and two little bows two little hair clippings and the object is to make their hair as crazy as you want you or the hairstylist so you take a curling iron and get a strand of this hair and you can curl it just wrap it around the curling iron and then remove it and see of course you don't want it going up that way you want it going down alright but that is pretty much what you do siyul the hair you can cut their hair and you can add more strands to the hair and to do that you just get a piece that's already inserted into her head you would just want to make sure it's one that's in her head and then you just twist this in you just twist it with the the normal hair and you can add more hair more hair and then you can cut it and just make it crazy but these they're pretty cute um let's get the other one yeah they're cute dolls I'm just really not a fan of the crazy hair I know that's the whole purpose of the line is to have crazy hair but it just feels weird to me I much prefer the normal Lalaloopsy girls hair yeah it's already crazy as it is that time but yet these are still cute and we will definitely be getting the other two in this collection they are just really not my favorite in this line and we love the Lalaloopsy girls hair we love the Lalaloopsy girls line but again this is Center slippers and scoops waffle cone and they are still pretty groovy

Please explain how to make a carob cake without sugar

hey it's courtney sullivan and welcome back to the farmhouse kitchen so today i am making a care of celebration cake which is basically the cake that i had in my hands when I first really talked to my future husband at the time when I was 19 I was in Woodstock selling cake and the cafe didn't have a check for me and I wasn't going to leave a consumable product with these folks without paying rent or without an invoice so I decided to take my product back home with me and I wandered into a bead store and there was my husband working as the manager and he was hungry and after he grilled me about all the ingredients he offered to buy a couple slices so I could have some gas money to get home so that's basically how our whole scene here started and I was making this cake today so I'll just tell you how to make it so I'm doing my normal thing so as you can see I already have the batter mixed up I have some cake like little cupcakes for the kids in oven already but basically here's the recipe it's really simple and so I'm going to make off of mix so that after the kids eat it and they say oh that was so good can you make it again I don't have to make it they can make it by taking the mix down off the shelf and making it themselves so it's two cups of unbleached organic white flour three-quarters of a cup of carrot powder and why use carob powder is because it doesn't have any caffeine in it and it has a lot of calcium and it is something I don't need a ton of because it can um you know block nutrient absorption in the body so I don't use a ton of it but it's nice for it's kind of like a 50-50 for you don't want to eat it all the time and then I have some dandy blend which is a herbal coffee substitute so I like to give it that gives it a richer chocolaty taste so I just add two tablespoons of that and then your baking soda it is a tablespoon of baking soda goes in there you just want to as you're scooping it out push out any lumps that you see and your baking soda because nobody likes to bite into a piece of cake that has a chunk of baking soda in there so that goes in there okay and then a tablespoon of baking powder in the next yeah and there are my cupcakes will you take them out 11 don't mind my helpers and that was a little on the shy side so I'll talk about this getting down there I have some other ones in the pantry that's one of my tips is that you should definitely always keep some extra baking powder on hand more than you think and so then this is all set to go and you just add a little tough to your business and your recipe card with the label of what it is and then written on the back is the extra staff so that people need to make which is adding the wet ingredients so for this cake it's one of the most decadent capes that we make so it has raw honey and it has a cup of raw honey you can go a little bit lighter but if you do you're gonna have to supplement or some other liquid today I chose to only put a cup of raw honey in my double batch because we're all snowed in in this frozen tundra that we're at so I did half and half milk and honey you can be creative and the key to this recipe what gives it this really light and fluffy is that there's vinegar which reacts with the baking soda which makes a very light and fluffy carob cake or dark forest cake whatever you want to call it and it does have some vanilla in it so just a lot of flavor bouquets going on and then you mix it all up into this lovely batter and because I have the convection oven going on it didn't have enough space for everything in there so I decided to make this little video for you to come along for our house kitchen and just check out how a simple it can be to whip up something and the double timing thing with making up a mix and you're making up a cake I mean you already have the mess out anyway you already have all those ingredients you always have everything out anyway so making another batch up and keeping it in a mason jar is a great way to have someone else thank you help you make a cake usually you have to have you know the carrot and the stick right like you have to give them something to make them want to spend their time in the kitchen doing that instead of doing something else they'd rather be doing so I am just making up this little bundt cake pop that in the oven and now we have these really nice little muffins that my daughter calls cookies and so she'll be really happy to wake up for rue nap and have a cakey so thanks for joining us in the farmhouse kitchen we look forward to seeing you again soon and cooking with your children in the kitchen peace

Please explain how to build a dart frog vivarium with running waterfall-easy to follow steps

in this video I'm going to show you in detail how I made this variant the entire build took over two months but I didn't take many pictures you're gonna have to bear with what I have my first step was cutting two inch pieces of PVC i journaled hole at the very bottom for water to drain out and two small holes at the top so I could attach the zip ties and plastic I drew I used a fish-safe and food grade black silicone adhesive in many parts of the process you can find a good one at Josh's Frank's calm I still look on the PVC to the bar of the tank and waited for it to dry next day I placed the egg crate on top and use needle nose pliers to get the zip ties through the holes edge rope egg crate was one of the hardest things to find this build it's a light diffuser for industrial sized lights so if you go to a Home Depot or loads you can go to the lighting department ask if they have some I had to go to a few stores but I eventually got my hands on some after that I placed an anti weed fabric over the egg crate this is so the next layer won't fall down into the water reservoir I then silicone my cork bark back rounded the one on the left is warped so I do attach clamps to it dried so it wouldn't fall off for the waterfall I use a fish-safe expanding foam and press small rocks into it please use latex gloves when working with it some got on my hands and it was on them for days behind the waterfall is the water tube sucking the water from the reservoir to go to the filter I used in a heme canister filter you can find it on Amazon I used wooden skewers to hold up the rocks with a foam drive I cut a piece of bamboo from llo reptile in half sanded it and used it for the second part of the waterfall after the foam dried I cut off excess foam and shaped it as I wanted to look when I was done shaping it I covered the foam with silicone and press Eko earth into it to make it look natural the next layer of the substrate was zoomin hydro bowls I use them for this project but I highly recommend using Josh's frogs false bottom instead I placed another layer of anti weave fabric over that the next layer is a dirt layer that will be directly under the moss I used Rogers fronds 8bg mix substrate it drains much better than ethos and creates a healthy environment for plants and microphone although you see in this picture is eco Earth I took it out and switched it for the apg the next layers of course emboss any high-quality moss we do I use dried spagna for some parts and live mops for the other parts finally is a leaf litter layer Josh's frog - the whole sort of dried leaves so check out their website to get some the plants I use in this tank were included in the 55 gallon dart frog plant kit and Josh's frogs to secure the Pamelia it's the background I stuck wooden skewers with moss on them into the background and a v-shape this cradles the plants as well as given the motor finally I decorated the tank with woody vines cork bark and many other things I made the screen down for the top with a screen door / window kit I found at Lowe's finally for the plexiglass half I cut the plexiglass of size with a jigsaw that had a special Plexiglas blade that's what I made this very there will be a dart Pro going in your shoes so when that happens I'll post a video bye you

Please explain how to peel bell pepper with mapp gas - specialty produce feature

chef brandon perry i'm gonna down here at specialty produce and i'm gonna demonstrate uh how to peel a bell pepper and how to peel a tomato without the use of water so i have a map gas right here which reaches a 5000 degree fahrenheit by doing this we have a little grill screen that's available smart final you're able to peel the skin off of the pepper without affecting the flesh without actually roasting it okay the next thing i'm going to demo is uh peeling a tomato the same thing map gas the skin comes right off you want to shock these in ice water real quick after you do this there's a little bit of heat but it doesn't actually cook the tomato or the pepper so the purpose of peeling a pepper or a tomato is if you use them in a saute or something during the cooking process the skin will separate from the actual the actual pepper okay as you can see the flesh isn't cooked so this isn't roasting this is just peeling you

Please explain how to perfectly apply liquid lipstick & prep your lips

hey guys welcome back to my channel today's video is going to be all about how to prep your lips and apply liquid lipstick so that way it looks its best throughout the day this is not i'm not saying this is the way you should do it or it's the right way or the only way but it's the way that i find makes my lips liquid lipstick look good all day so the first thing you're going to want to do is exfoliate your lips so so that way the liquid lipstick when you apply it doesn't like get stuff around all the trap parts of your lip because you're going to be able to see that and then if you ends up finding that skin off you end up like peeling that lifts the lipstick off with it and you're going to be able to see that it's like a bear circle or line there so this lip exfoliator that i use is from elf cosmetics it's their lip exfoliator and this is their original 1i know they came out with like two new ones and this goes for three dollars so what you're going to want to do with this is rub it on your lips and you can do this wet or dry I just do it and it just broke in my mouth you could do it while it's um I'd like to do I'm sorry when it's dry so just circle it around like that use your fingers in a circular motion as well it just helps remove the dead skin and then I take a tissue and just wipe all that off you don't have to use that exfoliator you can also exfoliate your lips with a toothbrush or a wet like a damp washcloth you can also use regular sugar and honey or just any type of sugar and yeah you're going to hear Brandon screaming in the background again because he's a week and cranky and after exfoliate I moisturize and the lip balm that I've been enjoying right now at the moment is the kaplan md and this is the one that comes with the lip mask so i just like to take that or you can use vaseline anything that's really client rating to your lips and apply that and I like to do this like when I'm in the shower or while I'm applying my other face makeup just so that way it soaks into your lips and look leave them moisturized and I had already done this before i'm just showing you the steps just for the video so now i'm going to remove that moisturizer i know some people like to leave a little moisturizer underneath oh I like the liquid lipstick but it doesn't work for me so my lips has to be completely dry and i'm going to show you with a dark color how to apply the liquid lipstick and i'm using a color pop ultra matte liquid lipstick in limbo so after prepping your lips you can use a lip liner to help you stay in the lines if that's how you feel or if you like to over line your lips a little bit and want to look neater but I'm just going to take the applicator and I take the very tip of it like when you hold it not towards where it's like more flapper if you turn it around like that the top part like this and i start to outline my lips and just take your time and be really careful just like that and then you could take more product if you need and then do the same thing to the top leg just like that and then I start to fill them in he's on a roll out there and when you're done basically filling in and all that if you did make a mistake you can take on like a flat brush let me show you like a flat brush you could use something like this with some concealer or your foundation and just clean up any mistakes that you had made you would just trace around wherever the mistake is and that would take it away and then you can just go back in with the color and sometimes it like looks a little jagged around the edges because the color tends to like bleed but you can easily go in just like you would with a winged liner to make the line nice and straight you would do the same thing put the applicator in the product take a little product off and just easily go in there and fix it until it's perfect so this is how I apply my liquid lipstick and it stays on all day doesn't have a problem there's no trapping or anything underneath so if you guys enjoy the video like this just remember to give it a thumbs up subscribe to my channel and please share and it's in my next video I'll see you guys leave

Please explain how to replace a whirlpool electric dryer drive motor

When the drive motor rotates, it turns the drive belt that rotates the dryer drum. It also rotates the blower fan blade to circulate air through the drum. A defective drive motor struggles to rotate the drum or might not turn the drum at all. Follow the steps in this dryer repair guide to replace a drive motor with a manufacturer-approved replacement part. Before you begin, wear work gloves to protect your hands. Unplug the dryer. Pull the lint screen out of the housing in the top panel of the dryer. Use a Phillips screwdriver to remove the 2 screws that secure the lint screen housing to the top panel. Push a putty knife under the lid near the left and right edges of the front of the dryer. Lift the top and prop it securely against the wall behind the dryer. Use a slot screwdriver to release the locking tab on the wire harness plug for the door switch. Use a nut driver to remove the front panel mounting screws from the inside of the cabinet. Pull the front panel forward slightly, and then lift and unhook it from the 2 bottom hangers. Pull the front panel off of the dryer and set it aside. Note the configuration of the belt on the idler pulley and the motor pulley before removing it—you might find it helpful to take a digital picture of it so you remember how to reinstall it. Push the idler pulley to the right to release tension on the drive belt. Pull the drive belt off of the idler pulley and the motor pulley. Use the drive belt that you just released from the pulleys to lift the drum up and out of the dryer cabinet. Use a slot screwdriver to pry out and release the mounting clamps on the front and rear sides of the drive motor. Remove the clamps and set them aside. Place a 7/16" wrench or adjustable wrench on the flat portion of the drive shaft at the front of the motor. Place a 13/16" wrench or adjustable wrench on the back of the blower wheel that's behind the drive motor. Rotate the drive motor shaft clockwise while holding the blower wheel stationary to loosen it. Lower the top panel and move the dryer forward so that you can remove the back panel. Remove the screws from the back panel. Remove the back panel from the dryer and set it aside. Remove the mounting screws from the air duct. Pull the air duct off and set it aside. Spin the blower wheel clockwise to remove it from the drive motor shaft. If the motor shaft turns with the blower wheel, hold the motor shaft stationary. Use a slot screwdriver to release the locking tab. Pull the wire harness out of the plug on the motor. Pull out the drive motor. Put the new motor into place and make sure that the locator tab on the new motor is properly inserted into the slot on the front mounting bracket. Line up the wire harness plug in front of the connector on the motor. Push it down and into place. Thread the blower wheel back onto the motor shaft. Spin it counter-clockwise to tighten it. Then use the wrenches to tighten the blower wheel on the motor shaft. To avoid overtightening the blower wheel, turn the wrenches until they stop and then apply moderate force to tighten the blower wheel on the shaft. Position the front and rear mounting clamps on the motor and snap them into place on the mounting bracket. Push the air duct into place and line up the mounting screw holes. Insert the mounting screws and tighten them firmly. Position the back panel on the back of the dryer. Line up the mounting screw holes. Insert the mounting screws and tighten them firmly. Lift the top panel and prop it securely against the back wall. Place the rear of the drum on top of the support roller that's on the rear panel inside the dryer cabinet. Lift the front of the drum to access the drive motor and idler pulley. Thread the drive belt through the idler pulley. Push the idler pulley to the right and loop the drive belt over the motor pulley. Position the front panel on the hangers at the bottom of the cabinet. Line up the mounting screw holes and reinstall the screws in the top of the front panel to secure it to the dryer cabinet. Plug the wire harness back into the plug on the door switch. Lower the top panel and snap it into place. Reinstall the screws in the lint duct housing and reinstall the lint screen. Plug the dryer into the wall outlet.

Please explain how to make mini deep dish pizzas in a cupcake pan (pepperoni, bbq chicken & cheese)

hi I'm Lindsay Ann and today I'm going to show you how to make these adorable little miniature deep-dish pizzas so today we're making one of my favorite foods ever pizza we're gonna be making them and these adorable little miniature versions they're really fun to make so first you get just some store-bought refrigerated pizza crusts alright I hate this part whoa and we're just gonna roll this out and get it nice and flat it depends how thick you want your crust if you want it a little if you want more of a thin crust you can roll it out a little bit or you can leave it thick if that's how you like it looks good and then we're just going to take a little olive oil and brush it around in our pan this is a silicone pan so it's pretty nonstick we just don't want Adam to crush sticking to the pan all righty and then we're gonna cut our circles this is the lid of a peanut butter jar it just has a nice big circular shape so if you don't have a cookie cutter in that shape and press a little hard with this one and you're just going to cut out your pizza dough circles and then Oh cut six and then we're just gonna press them into the pan you can stretch them out a little bit if you want them to be more of a deep dish and you just stuff them in and these are a really great size for a nice little appetizer platter they make a really great finger food at kids parties can make a bunch of cheese pizza they also freeze really well what I like to do is make a bunch of them pop them in the freezer so whenever I get a keeps it craving you can just take a few out reheat them and that way I don't end up devouring an entire pizza they also make great lunchbox items so now that we have all of our wells filled we're going to add the sauce now you can do a white pizza you can fill it with pesto today I'm doing regular pizza sauce I also have some barbecue sauce and with this leftover dough what I would normally do is roll it out again and then cut out some more and make some more but for today we'll just make six perfect little pizzas so you're going to want to spoon in about a tablespoon of sauce for each well and when I do regular pizza sauce sometimes what I like to do is brush in a little more oil and I'm just gonna brush them all with oil just to make sure they bake up nice and golden-brown but with the regular pizzas I like to do a little garlic powder around the top of the crust and some Italian herbs and that just gives it a little more pop of flavor and it looks pretty on the top of the crust when it bakes up all goals in with the specks is the green herbs on it and then I'm just gonna spoon in my sauce into the bottom and you can kind of brush it up the sides of the pan a little bit and here I have my barbecue sauce my barbecue chicken pizza it's what I one of my favorites when I go to restaurants it's the barbecue chicken pizza they make so this is my little recreation of it at home okay and now we add our cheese I just have some shredded mozzarella you can do any kind of cheese blend you want I like to do mozzarella for a classic taste all righty you can have as much cheese as you want I'm a huge cheese lover so I like to add a little extra cover up all that sauce you can also get like a light or low-fat mozzarella cheese and do a bunch of veggies for a healthier alternative and then I'm going to make some pepperoni pizzas with these mini pepperonis I found at the grocery store if you can't find mini ones you could use regular ones and just cut them up into small pieces or take one and top the whole entire pizza it'll be a fun look so I put like three or four on each and then for my barbecue chicken pizza here I have some chopped red onion that I'm going to sprinkle on top and of course you can skip the onion if you don't like onion mix it up whatever your preference is here I've some rotisserie chicken and put some of that on top all righty looking good okay so I think these are ready for the oven so here I have my oven preheated to 450 degrees and we're gonna pop these in for about 10 to 12 minutes until you see the crust start to puff up and turn golden brown all right let's get those in there all right now let's wait for those to bake up nice and pretty all right so our pizzas baked up gorgeous and at this point you can serve them I like to top them with a little Parmesan cheese I have some chopped up cilantro here for my barbecue chicken pizza but get creative have fun with it create your favorite flavors and for more videos be sure to subscribe to my youtube channel and connect with me online for more fun baking tips recipes and ideas thanks for stopping by on my dollhouse Bake Shop see you guys next time

Please explain how to make seafood bisque

oh we're talking food already we're so excited with coming in this week it will eventually get colder it might be a good time to warm up some suit and perfect timing guess tomorrow is national seafood bisque day so we have chef Patrick in the kitchen he's from the cocoa and air and is going to show us how easy it can be to make at home because it looks so fancy you might think it's complicated well there's a little bit of time consuming on making a bisque just because you need to have several components into the bisque you got the seafood veloute that you have to prepare and you got to make me up where you got to sweat your seafood you got a you got a puree them you got to put it back you got the cream so it's complicated well it can be done and what you could do I mean you can cheat a little bit by using a swing base but I don't recommend it okay so what I did I basically did the base okay so right now we have the base ready so the only thing we do going to finish it basically we have shrimp lobsters I used some flambe with cognac a little bit I did some garlic and I did mirepoix and also tomato paste and that is my base and after that what I did i pureed the the seafood I strain it through a chinois oh not a China cap shinhwa's little bit different and also we've already forgot down she's got she's got thank you somebody's always forgot cheese come so when we done after that what we do we put it back on the stove and we're gonna wait on t restart a simmer a little bit we're gonna finish with some cream finish it with white pepper salt component show you why not yet we're gonna wait on other one start seeming a little bit this is why I have patience issues in the kitchen well you gotta be patient yes and we're gonna finish that already sautéed some shrimp how could some fresh fennel fennel on everything me because I'm come to see Lawrence yeah anything was a nice a lot of it a little bit of a licorice flavor maybe yeah on the shrimp only known on you know soup and there's a misconception about bisque when you go to restaurant and people's have you tomato bisque but it's not a bisque a bisque technically it's a seafood based soup okay unless it's made with seafood it's not a bisque now you know it's we call it the French credit seafood added to a cream finished with a cream so that's what the French call it and the bisque basically it come from the bay of biscay which is our way from Brittany all way down to Spain so time to pour in yeah oh yes so we're gonna point a little bit right here mmm just a little bit of cream okay we're gonna add some salt smells amazing white pepper a little bit of sherry wine I mean yes just a tiny bit of sherry wine just to give it a little taste little bit of cayenne pepper to give it a kick and I'm gonna add the shrimp to it a little bit of the shrimp you saute that before oh yes yes yes you know we're gonna finish it by him and so be done in a couple of seconds yeah we do could you make the base beforehand oh yes I made I made the base I made the debilitate the day the day before yesterday are we ready you see it's starting to get gorgeous so now we're going to plate it right here see the consistency of the soup is perfect creamy and delightful or even delightful we're gonna add some shrimp to it not a single splatter there we go I'm gonna finish it with a little bit of cheapo nod here we go you know what I want you to do is take a spoon right there no problem just gorgeous okay here it is yeah delicious creamy fresh very tasty that part didn't take too long if I could make the other part the day before maybe you know who this is pretty good it's pretty good you know we do not have time to warm it up enough that the flavor the flavor is there so you want to make a bit tomorrow get some seafood get some take the body of the shrimp thank you lobster heads or you can even make a seafood chowder I mean a bisque without the shrimp just go to your fishmonger get some white fish bones make a feasibility and why not try it national seafood bisque yeah I love the bisque I mean I cannot be stopped the time

Please explain how to grow marijuana at home | hydroponics

Please explain how to remove a styrene model from its' sprue

and welcome back to another cools painting tips this week I'm going to focus on something really simple same thing I did last week we're going to learn how to clean up a styrene model this is a age of sigmar I can't remember what it is it's one of their Champions sound from Games Workshop so I'm going to show you how to get rid of the mold lines on this although there is very few they're almost non-existent they're just very little and I'll show you how to get this out of the spring so let's get started alright for cleaning up and assembling one of these models you really only need two tools and that is just a regular hobby knife and you will also need to get yourself a pair of these they're called flush cutters or a sprue cutter and that is so we can cut the pieces off of the sprue with as little damage as possible to the model there won't be any really but if you're not practiced well enough you might do a little bit of damage so all you have to do remove the mold lines first when the figure is still in the sprue so like I did with the PVC model you just take a really good look at it and figure out where your mold lines are so there's very few of them and they're really really non-existent there's you know harder than anything here so what you do is just take your knife and scrape it along the mold line it's much easier than PVC because the styrene doesn't pill so all you have to do is just scrape your enter your knife along the mold line and it will go away there is quite a bit on a hammer well more than anything else else around here let's see if I can we can take a closer look at this okay so the hammer has a little bit of a mold one here so I'll just show you how to remove that and what I'm gonna do exactly let's get focus here if we can so very easy just scrape the stuff off and if you look completely on the styrene is much easier to work with in the PVC all you have to do is just give everything a quick scrape over the mould line and they disappear the flat areas are especially easy like this one so unlike the PVC where you're having to shave it off like this the styrene plastic for any of the games workshop or anything that's on a screw like this you simply scrape it along the side and that will get rid of all of your lines so as you can see the age of sigmar figures are sitting really well cast there is a lot of mould lines on them at all so now we're going to take our flush cutters and I'll show you on the base first because it's the easiest now most people will say a cup great flush against the the plastic I say no cut a little piece of this stuff off first with your screw cutters don't cut all the way flush to the plastic simply because with the figures you'll find that if you cut a piece of this sprue off you'll incur less damage as you go so leave these little nubs like this on and you just take your hobby knife afterwards and shave them off so I just shaved those off with the hobby knife and the surface comes out much more even so that's always the best way to go about it for cutting it off the screw so remove the mold lines first before you remove the figure off the sprue and that's simply because it will allow you to pull the figure and it'll brace the figure make everything easier to clean as you go so let's cut the rest of this thing out alright so same thing we did with the base just need a little bit of plastic and the hammer because it is a flat surface you can cut that one flush but I try and leave at least a little bit of material and then as you can see the screw work annexed to the shoulder here there is a bit of detail so it is better that you leave a little bit of nub of plastic on all of this stuff and then just cut it off afterwards so I'll just jump to the edge shop when you're coming this stuff off don't cut this way towards yourself always cut away from yourself if you see me do it the videos do as I say don't do as I do I'm usually really bad for safety anyway but with these nubs what you want to do is shave it off like we did with the PVC just ever so gently and then get a majority of the material off and then use the side of the blade and just scrape the surface even so now we'll jump to you thought I would show you the head just because it's a really delicate piece let's zoom in on the head and the same thing here so there is a best order to go about this so cut the two sides here first leave quite a bit of material on the head because as you can see this little sunburst thing is pretty delicate so let's use the very tip of the Clipper you just ever so gently squeeze the plastic until it's sort of pinches off so just make sure you just squeeze it ever so gently so the plastic pinches off and then the bottom one you should do last and because it's going into the socket where the neck fits here we can cut that one right flush and then that should fall off pretty easy and then it's just a simple matter to shave these nubs off with your knife just the very very tip and don't go this way because in case you slip you're gonna be cutting off one of these a little of spikes that's on his helmet so we want to cut this way be very very careful because it's such a small piece your fingers might be in place just very gently saw push this plastic is pretty soft so it should go through easily as long as you have a nice truck so I'm your perfectionist here because I'm going to paint this guy - really nice nice this one - don't go this way because in case we slip with confidence right so if you want to you can just shave the top of it off like I'm doing here and just slowly shave down little thin layers until you get to the bottom so tada and he's nice and perfect to me have him cut off think that the spikes illuminated for details again a piece like this there's a certain order you should go in and these one this should be the last ones that you cut so we can cut these thicker ones on the shoulder pads here it's a pretty good piece attached like I said before we're trying to leave a little bit of the manova here now because the sword is a double piece you see here it has like two layers to it so it's obviously stronger here than it is here so you cut the stronger piece first because if it bends it's much easier to hold together because it has more structure to it and then you cut the ribbon piece last because it's the most delicate so that the general rule here go from the strongest looking points to the flimsiest points so same thing that we did on the head we did the sides of the head first and then we cut it off the body same thing here do the shoulders first then cut the stuff off the flimsy stuff on the bottom and then the shield it doesn't really matter we can any order because again it's attached all on flat surfaces it's easy enough to fix all of that with our hobby knife so we can cut this one almost flush to the surface there we have all the pieces out of the sprue and then just give everything here quick cleanup by just doing the same thing I was doing on the head just shaving off just like little pieces of the plastic not here where it's got the sperm injection point it's a little and even just turn the knife up and we'll just scrape the surface so once you get it out of the screw to take a check on it make sure you've gotten all the mould lines I found another mould line that was on the underside of this guy's bottom here so I removed that after the sprue and there was a little bit on his hammer as well the hammer by far was probably the worst piece of them but what I've seen from these models so far is there a really nice think that hardly any more lines and the hardest part about cleaning them up is just getting rid of these attachments to the sprue and the injection points that's really all there is to it these major sigma models and i'm assuming the models in we're having a quest silver tower of the same misterben india this video was for you since you asked so there you go that's how you clean out the styrene figure that's from Games Workshop or I know the Privateer Press is also using them as well so I know they're numero warjack models are all styrene too so there you go very easy stuff another basic video right there you have it folks that's how to remove the mould lines on a styrene model and how to the best way to remove it from the sprue hopefully that helps out any of the new players that have picked up they're a Warhammer Quest stage of a silver tower boxes or any of the New Age of sigmar players or in case anybody's wondering how to get things these things out of the screw and cleaned up so that they can at least put them together if not paint them next week I will have a video up for base coating and how to properly thin your paint so stay tuned next remember you're always welcome to like and share and subscribe to my channel stay tuned every week for new videos on how to paint I'm going to cover some more basic stuff but I will also be moving into some more advanced techniques like object source lighting and other things like that so stay tuned I will have plenty more videos with lots of different stuff for both beginners and advanced painters alike thanks for watching

Please explain how to make a worm farm from a wheelie bin

g'day guys it's on from the productive garden comm and today we're going to be making a worm farm out of a wheelie bin or some people might know them as an auto beam it's an old bin I got secondhand with wheels on it used to be used as some sort of garbage bin I've given it a good wash so it shouldn't have any contaminants in it but basically these things sell for a bit more than $200 I've got to bend $15 the parts have cost me about $50 and some of them some of them were a little bit of expensive that's just the way it goes so I know easily built this bin for under $100 and then I could have bought one for 200 so I think that's that's not a bad way to save some money if you want this sort of thing and it's going to be a turnin 40 litre worm farm which and it's a portable worm farm on wheels so if you want to move it around that's an easy easy thing to move around all right let's have a look at what we need to make this one farm and the tools that we need to make it with as well now we'll start with the tools that we need to make this worm farm now one tool that we'll need will be a jigsaw we'll need a power drill or the cordless or a corded power drill and let a spin up and get an adjustable spanner or a spanner to fit Theon they're not the size of nut that you've going to use a screwdriver you'll need a spade bit or a hole saw whichever you prefer to use and you'll need a drill of your private size and the drill I'm going to be using is going to be a four millimeter drill bit okay you'll also need a pen and scissors so that you can make a little template that we're going to use later on to make that template obviously you'll need some cardboard I've got a bit of a cardboard box here that I'll be able to make the template out of now the items you'll need to make it I'll go to the bin first firstly you're going to need a bin okay like I said I bought this one from the local waste area waste disposal waste if I would even want to court and since each had a bit of a play zero inside it was fifteen dollars pretty good also need some nuts and bolts and I've got these stainless steel nuts and bolts because they are going to be inside or part of them is going to be inside the wind farm so I don't want them to Ross very easily okay what I've got here is a deck plate so I'll get no one said this is what they look like which I'll just tip fill these out that's better alright so that's what it looks like from the outside it's a deck plate and this middle bit unscrews so you can get access to the bottom of the pin and get wound castings out and that's the back of it that will be inside so that will allow you to get access to the castings and I'll show you how that goes on and that's what we're going to need the cardboard box to so that we can make a template that will just make it easier to cut out the hole in the bin so that we can get this fixed nice and family and neatly into the bin you'll also need a valve of some sort so that you can basically that's to drain the liquid out at the bottom of the worm farm okay so this is the valve of decided to use this is a bit of irrigation connection it's an adaptor from irrigation that I've decided to use and it fits nicely onto the end of this valve and that's basically going to be used to just to lock it on or it's going to be screwed on the inside just a lot to valve into place on the bottom of the worm farm and what I'm going to be using at the bottom to hold the castings up in the layout of the moist of the drip through from the bottom is this lid from a container that I had laying around I don't use the lid at all the container just has stuff in it but the mains got stuff that's two full till the other lead to be put on but yeah this lead doesn't get used so I mean it is just laying around really doing nothing so it'll be it'll fit pretty perfectly inside the bin I just have to a little bit of a trim and then it'll it'll do nicely just as the floor of the actual room area allowing the liquid to drip through at the bottom right now one last thing that I'm going to be using is I got these I'm going to use these to hold down little be awaited fastened down the lid so that rats or or costumes or any other critters can't get in there and either eat the worms or eat the scraps that are in there so these are basically Clips the hole down a cover or a tonneau cover on a yute or utility whichever you want to call the vehicle yeah so this is the elastic strap that goes around these buttons so the lesser stuffs attached to the tonneau cover normally and these buttons are attached to the walls of the of the UM tray on the back and they will basically the elastic will go in here and button will go in here or probably on here so that it can stretch over and hold the leg down so that nothing can lift it up and make access to it if I don't want them to all right now that's the part that we need and the tools that we need to make it with now let's put plans into action and start making this worm farm right now what we want to do is make a hole here so that we can fit this valve so it will sit basically like that on this wheelie bin okay so what I have done is I've marked the middle so one of the other tools we need is a measuring tapes of just sort of roughly measured where the middle is going to be and done little cross so I've got the middle and how high I want the valve to be so like I said I'm going to be using a spade bit and the reason I've chosen this is because getting something to fit that exactly was difficult so with a spade bit I can get the basic hole in and then make the hole bigger just by moving the spade bit around and just shaving a little bit off the hole at a time and then I'll be able to make a bigger getting a whole sort of fit exactly was hard so your spade bit seemed to be the easier option for me I know there are other ways to make holes in the plastic but that's what I've decided to do so we'll get this whole done and then we'll get the valve installed now I've got the tap installed I need to get this irrigation adapter on the other side hold on one of the other things I forgot to mention that you that is worthwhile using as well is a bit of silastic as well just to just to seal any of these joints just in case there's any leaks that might come through this will help to prevent them and if you get a little bit of liquid leaking out of here it's not going to be a big deal unless it's going to make a mess where you've got the worm farm but just to make it nice and clean so we haven't got any stuff dripping out I'm going to use silastic so I'm just to seal it now what I'm going to do is I'm going to put silastic array on the inside which means I'm gonna have to crawl inside the bin which is a bit of a feat for me I'll crawl inside the bin I'll get this nut on and while I put the nut on before I put the nut on I'll put some silastic around the valve inside and then screw the nut on and that should seal the slicey just nicely so that the um the liquid doesn't leak out from around the valve so we'll do that and then we'll move on to getting the deckplates they'll be going on the front and on each side all right so it's time to fix these dick plates now what I've done is I've measured up how far I want it to be from the bottom so I've measured up 22 centimetres because the UM the floor for the actual worm lived I'm putting in there to hold the worm cassings up will be right here and that just gives me a little bit of clearance I don't need to be right down the bottom of the UM of the worm area so 22 centimeters up is where I'm going to have it which i think is about about 11 inches I think so that's where I will have the or maybe 9 inches actually I'll have to check that ol I'll leave a thing here telling you how many and I studies in inches but 22 centimeters and just mark the middle there as well so I know where the middle is and so I can place it where I want it to be now the template that I'll be using I've just cut a circle which is as big as this outside ring on the deck plate okay so I've got the circle here so what I can do is I can place this where I want it to go okay hold it down and then I can draw the shape over on the template now I know that that is the shape that I want to cut out now it looks really rough on I'll try to cut it a lot neater than that but yeah we'll see how this goes in with the jigsaw I don't know how hard this stuff's going to be to cut but what I'm going to do is to start the jigsaw I'm just going to use the spade bit again just to make a hole so I can get the jigsaw in there and start the cut okay so I'll get this in there and then we'll get a spot where we can start the cut all right now it's just a matter of just getting the jigsaw and we'll cut around here all right so now I've got a hole cut to fit the deck plate on so the deck plate can fit nicely there and now what I have to do is just drill some holes so that the screws can go through so I'll get my four millimeter drill bit and drill the holes there that allow the screws to go through and then we can do up the nuts and before we put the screws nuts in place we'll be putting a bit of silastic around here just to seal it nicely not that a lot of liquid or coming out here but it'll just help to seal the hole just so it's it's nice and snug okay so we'll drill these holes get the UM the silicon and the nuts in place and finish off this deck plate now we'll get a good thick bed of silastic around the outside of this deck plate and no need to skimp on this I've got the silastic on there we'll get the dick place dick plate in place and just line it up again with the holes and then the holes we've drilled are just a little bit smaller than the thread on these screws so it should just be a matter of screwing these through so there's one we won't do it up real tight in case we need to do a little bit of adjusting you get another one in all right we'll get the rest of these screws in and the plate will just naturally as you screw at the under specialties they put the nuts on the other side just redo this hole yeah seem to have it a Mego okay so like I was saying it when we do the nuts up on the inside it'll um it'll pull the deck plate against the wall of the bin and seal that slice it down pretty well so I'll get the rest of these screws in I'll screw on the other side and then what we've got to do is just I've gold trim I'll trim the UM the lead off the top that I've got to put as a floor and I'll show you what I'm going to do to install that it's gonna be really simple it's not gonna be much at all involved in that but I'll get this done and then we'll put the floor in okay so you can see I've got the deck plating places that one on the front there's the one on the side which I've actually taken the cover out of just take your excess here and the one on the other side get that in focus there we go um yeah so I've got them on there I haven't tighten the nuts yet I'm just going to get the floor in the bottom nail what I've done I've trimmed off at the bottom of this off the bottom the end of this um lead I've also drilled hip holes in it now I'll just tape holes in the bottom just drill it random force I drilled holes him in the little low points where liquid would um would build up just so we don't get any sort of build up of soggy um Verma casts that would go acid and all horrible and smelly so that'll allow any any liquid to build up in those areas that'll allow it to dry and away okay now what I've done you seen so I think I put some bricks in the bottom now that's going to hold up the front I'm not going to worry about trying to screw it in and I sort of thing I don't really think it's necessary it's just going to make it easier if one day I want to pull the floor out I'm just going to be able to lift it out without having to undo any screws or anything like that okay now just put a bit of silastic on the bottom of those bricks just to sort of hold them still it unexpected to do a great job of holding them still but it'll it'll do it just to get a me some work put on them they'll stay where they are and there are you just holding up the floor anyway okay you can see there's a little step in the back there and that's going to what be what holds it up in the back okay now I'll put this unit fits pretty snug it takes a bit free when you're around to get it in slow easy do it two hands one right yeah and you can see it fits in there pretty snug I just have to adjust it push it over that side a little bit just to get it to fit in a bit better but that's not really going to matter a little bit of very class might fall down there I might just trim this corner here just so it fits in a bit better okay so that's how the floor is going to go in and I'm get allow the liquid to drip to the bottom and hold all the Roma car stop okay now that the deck plates are in place and the floor of the worm area is in place it's time to get the UM D weather now which would call the elastic fastener in place to hold it down now what I've had to do on this one here I've drilled a hole in the middle at the front before I did that I pressed this yellow study in the back and what that does is that holds this elastic in place so it doesn't slide out then I've drilled them draw drilled a hole down the middle so I can get this screwing so that I'll be able to fix it there okay now with this one here it's just coincidental that and that's nicely countersunk and the screw will just fit very nicely in place there so it's just a matter of drilling a hole there and basically putting it in place now what I've done is I've marked some marks in the middle so I know where the middle is so if that sits there the elastic will fairly easily stretch down over the button now over this button okay so I'll put these in place and then we of the facile idiom so putting it in place is just a matter of drilling a hole here their bells and will drill a hole down here for the button okay so when you drill holes beware of what's behind them there's a bit of like plastic bracing behind which holds this little sort of colour out so I'm just gonna have to off-center the button a little bit so I don't hit that little bit of black bracing there you go that's better all right now I should be able to fasten this on right and of course I'll put an ad on the other side of this to hold it on and you screw this button will go on here okay so like I said I just need to tighten this up and put and not on the inside of them but you can see here now it's fastened down nothing's going to be easily able to get into that and even like things like the wind or anything like that isn't going to get underneath the lid and possibly blow it open so it's as easy as that just yeah put put this thing together push the button in the back of it the white button in the back of it like I said that holds the elastic in till the hole in the middle then you can get that screw through easy as okay so that's done we've just got one more step to do before this is ready for wounds to go in oh yeah now just put the UM the latch I think the locking device on there um now the other thing we've got to do is just put some ventilation holes up the top here now because this is locked down fairly tight and there's no if with the tubs I believe there's a lot of room for air to move between the tub so I don't think there's really a big need for ventilation and I've never needed any anyway other worm farm or smaller worm farm but on this one because it's locked down and there's not really any holes down the bottom let air flow through I believe it's important to have some holes at the top to let air flow through so all I'm going to do and I'll do it on either side and you've got these supporting ribs here is a nice little guide so what I'm going to do is just drill just a series of holes just between each of these ribs on each side of the UM of the bin now I've got a little one point nine five mil basically males will say two millimeter drill bit here and the reason I've chosen a small one like this is it's going to stop blow flies and that sort of thing going in there and laying maggot in there so well I'm going to do is just and being careful with these drillers Lord I want to snap it by being too heavy on it and I'll just drill a little series of holes for a fox here and Jill yeah if you wanted to you could easily just get a um advance of some sort and just cut out a hole and install event you could easily just maybe cut out a hole with um a hole saw and glue will fasten some house and some sort of fine mesh screen then so yeah there are other ways to do it but basically this is the way I'm choosing to do it just four rows of four holes here and that'll let some air flow through so whichever way you choose to provide some ventilation to the worm farm as long as it's not letting flies and stuff in it you know they're going to lay maggot in I mean if it works it works and that's great so yeah that's how I'm doing it I'm just going to drill a series of holes they're four by four in between each of the ribs like this on each side so in the end they'll be two here two two and two so they'll be eight sets of holes that should allow plenty of area to flow through them okay so I'll do these and then we'll get the worms get the worms in the in the worm farm alright I'll finish this off and then I'll be back so now we're ready to add the worms now what I've got here is some coconut coir which I've got soaking in here and smile on ice water sodden mess I guess and I've got some worms with some food you can't see the waves I better to get me out where are they there were eats of me before they are all underneath so you can see their heap of worms that I harvest out of my other worm farm and I'll probably I'll probably get a few more than you said up there sometime later but that's just what I dug up quickly just a stick in there now and they've got a bit of thumb bit of the food scraps that was in there with him in a bit of um the worm castings as well so what I'm going to do is put this coconut core in the bottom of the wine phone okay so we'll just keep it a layout you know dude one in okay you need the excess water I'll scrape that out later on in check any excess water will kick through and I'm it's gonna take a little bit of liquid to to fill this up actually what I might do these deck plates there bit easier to undo with two hands in one there goes okay so if I get down a bit you can see in there so there you go that's how you access it okay so spread all that out there we go it's pretty big more over here Daniel doesn't really matter if I don't tell the whole thing though they'll cover it all eventually yeah I'll put these guys in there tail don't get all them out there's a few still little stragglers in there I might just put a little slosh of water in there and get the last of them out so there you go I've got some ones in there and we've got what we've got as well is the Hessian sack for depression then we've got there and well worth the deal we'll just have to sort of unfold it a bit and that'll basically go down and cover them over so something like that it'll be straighten it out a bit better um what I'm not holding a camera and trying to do it at the same time okay so I'm expecting eventually the level of a field will come up to here and that looked like the best basically be a small layer of food on top like that much so but it won't be much at all and the rest will be very cast and it'll be just be a matter of opening up the deckplates and just using your hand or a small hand spade or something like that just getting in there and digging out a bit of thermokarst for whatever use weather for ceilings we'll put around plans that sort of thing and I'm then put the deck plate back and that'll be the way that you harvest the Verma casts from the work farm alright so that's how we make this won't farm like I said they they value at about $200 to buy them from people that make them so I've spent I added it up with everything about $80.00 so I've well and truly saved half the price more than half the price of what this would be worth if I was to buy it so it's worth making itself if it was to buy one of these bins new they're worth about $100 on their own so I was able to get this $15 like I said so that's taken a big slab off the price there straight away yeah it mean always try and get your stuff as cheap as you can sometimes you can't get into it like the lead it was just off a tub that I already had so I didn't need to spend any money on that at all I mean these things I had to buy a pack of those I had to buy stainless steel screws I would I would recommend using stainless steel screws normal steel screws or zinc-plated screws because they won't rust the way other screws will and they're going to be under um like wimpy they're going to be in a you know moist environment all the time so stainless steel marine qualities bolts and nuts are going to be the best and they can be pretty expensive that they were worth like the screws of sorry the bolts and the nuts of this they're worth 30 bucks on their own so may note that puts up the cost a bit I mean if you were to use a cheaper version of screw or sorry bolt and not nuts and bolts you could you could save a little bit of money there but you'd end up with a pretty messy rusted out sort of fastening system in the end so I think it's better off just spending a bit of money on things like that just to make sure it's done really well and that it's going to last a fair amount of time everything is pretty easy to get at most places the hardest thing to source are the deck plates now the deck plates you'll be looking for them in a boat accessory shop somewhere that sells like the accessories for all types of boating you can find them online if you just search for deck plates and they're basically what they used for is their little openings to get into cavities inside boats to get to fluid lines or electrical cabling and that sort of thing so that's basically what they're used for okay and actually I did try a few other things some plumbing access ports and that sort of thing that I thought I might be able to adapt to the situation they ended up being a lot more expensive than than the deck plates were so they're actually one of the cheaper ways of achieving an opening in their bin to one now to achieve that to get that something that'll work and look neat and tidy anyway that's it for now I hope you enjoyed this video on how to make this worm farm and maybe you'll have a goal of making one of these yourself anyway until next time happy directed gardening by you