ChemTEB Classification Datasets
Collection
Chemical Classification Datasets for Evaluating Text Embedding Models
•
19 items
•
Updated
text
stringlengths 105
19.5k
| label
int64 0
4
| label_text
stringclasses 5
values |
|---|---|---|
Colorless fluorescent dyes that emit blue light under UV are added as optical brighteners to paper and fabrics. The blue light emitted by these agents counteracts yellow tints that may be present and causes the colors and whites to appear whiter or more brightly colored.
UV fluorescent dyes that glow in the primary colors are used in paints, papers, and textiles either to enhance color under daylight illumination or to provide special effects when lit with UV lamps. Blacklight paints that contain dyes that glow under UV are used in a number of art and aesthetic applications.
Amusement parks often use UV lighting to fluoresce ride artwork and backdrops. This often has the side effect of causing rider's white clothing to glow light-purple.
To help prevent counterfeiting of currency, or forgery of important documents such as driver's licenses and passports, the paper may include a UV watermark or fluorescent multicolor fibers that are visible under ultraviolet light. Postage stamps are tagged with a phosphor that glows under UV rays to permit automatic detection of the stamp and facing of the letter.
UV fluorescent dyes are used in many applications (for example, biochemistry and forensics). Some brands of pepper spray will leave an invisible chemical (UV dye) that is not easily washed off on a pepper-sprayed attacker, which would help police identify the attacker later.
In some types of nondestructive testing UV stimulates fluorescent dyes to highlight defects in a broad range of materials. These dyes may be carried into surface-breaking defects by capillary action (liquid penetrant inspection) or they may be bound to ferrite particles caught in magnetic leakage fields in ferrous materials (magnetic particle inspection). | 4 | Ultraviolet Radiation |
Areas that have limited surface water or groundwater may choose to desalinate. RO is an increasingly common method, because of its relatively low energy consumption.
Energy consumption is around , with the development of more efficient energy recovery devices and improved membrane materials. According to the International Desalination Association, for 2011, RO was used in 66% of installed desalination capacity (0.0445 of 0.0674 km/day), and nearly all new plants. Other plants use thermal distillation methods: multiple-effect distillation, and multi-stage flash.
Sea-water RO (SWRO) desalination requires around 3 kWh/m, much higher than those required for other forms of water supply, including RO treatment of wastewater, at 0.1 to 1 kWh/m. Up to 50% of the seawater input can be recovered as fresh water, though lower recovery rates may reduce membrane fouling and energy consumption.
Brackish water reverse osmosis (BWRO) is the desalination of water with less salt than seawater, usually from river estuaries or saline wells. The process is substantially the same as SWRO, but requires lower pressures and less energy. Up to 80% of the feed water input can be recovered as fresh water, depending on feed salinity.
The Ashkelon desalination plant in Israel is the world's largest.
The typical single-pass SWRO system consists of:
* Intake
* Pretreatment
* High-pressure pump (if not combined with energy recovery)
* Membrane assembly
* Energy recovery (if used)
* Remineralisation and pH adjustment
* Disinfection
* Alarm/control panel | 1 | Separation Processes |
Sperm banks make information available about the sperm donors whose donations they hold to enable customers to select the donor whose sperm they wish to use. This information is often available by way of an online catalog. Subscription fees to be able to view the sperm donor through California Cryobank, for example, start at $145. This cost could potentially be a barrier for many on limited income and may not have discretionary income to spend on sperm donor services.
A sperm bank will also usually have facilities to help customers to make their choice and they will be able to advise on the suitability of donors for individual donors and their partners.
Where the recipient has a partner, they may prefer to use sperm from a donor whose physical features are similar to those of their partner if they have one. In some cases, the choice of a donor with the correct blood group will be paramount, with particular considerations for the protection of recipients with negative blood groups. If a surrogate is to be used, such as where the customer is not intending to carry the child, considerations about their blood group etc. will also need to be taken into account. Similar considerations will apply where both partners in a lesbian couple intend to have a child using the same donor.
Information made available by a sperm bank will usually include the race, height, weight, blood group, health and eye color of the donor. Sometimes information about the donors age, family history and educational achievements will also be given. Some sperm banks make a personal profile of a donor available and occasionally more information may be purchased about a donor, either in the form of a DVD or in written form. Catalogs usually state whether samples supplied by a particular donor have already given rise to pregnancies, but this is not necessarily a guide to the fecundity of the sperm since a donor may not have been in the program long enough for any pregnancies to have been recorded. The donors educational qualification is also taken into account when choosing a donor.
If an individual intends to have more than one child, they may wish to have the additional child or children by the same donor. Sperm banks will usually advise whether sufficient stocks of sperm are available from a particular donor for subsequent pregnancies, and they normally have facilities available so that the woman may purchase and store additional vials from that donor on payment of an appropriate fee. These will be stored until required for subsequent pregnancies or they may be on-sold if they become surplus to the woman's requirements.
The catalogue will also state whether samples of sperm are available for ICI, IUI, or IVF use. | 0 | Cryobiology |
A thermodynamic system is ergodic when, given any (equilibrium) instance of the system, it eventually visits every other possible (equilibrium) state (of the same energy). One characteristic of spin glass systems is that, below the freezing temperature , instances are trapped in a "non-ergodic" set of states: the system may fluctuate between several states, but cannot transition to other states of equivalent energy. Intuitively, one can say that the system cannot escape from deep minima of the hierarchically disordered energy landscape; the distances between minima are given by an ultrametric, with tall energy barriers between minima. The participation ratio counts the number of states that are accessible from a given instance, that is, the number of states that participate in the ground state. The ergodic aspect of spin glass was instrumental in the awarding of half the 2021 Nobel Prize in Physics to Giorgio Parisi.
For physical systems, such as dilute manganese in copper, the freezing temperature is typically as low as 30 kelvins (−240 °C), and so the spin-glass magnetism appears to be practically without applications in daily life. The non-ergodic states and rugged energy landscapes are, however, quite useful in understanding the behavior of certain neural networks, including Hopfield networks, as well as many problems in computer science optimization and genetics. | 3 | Magnetic Ordering |
Nanoscience and nanotechnology have been emerging as a technology for the development of various hybrid and composite materials for biomedical applications. When nanomaterials are used for the development of the composites in biology, they are called bionanocomposites. Bionanocomposites have been used in tissue engineering to replace, support, or regenerate the cells, organs, or parts of human entity such that it can function as normal.
Amylopectin-based bionanocomposites are another important class of bionanomaterials, which are biodegradable, with higher mechanical properties, optical transparency, thermal stability, and barrier properties than thermoplastic starch. In conjunction with other nanomaterials like cellulose nanocrystals, nano-ZnO, nanoclay, biodegradable synthetic polymers, starch is one of the most popular materials for the preparation of bionanocomposites for various biomedical applications such as controlled drug release, scaffold for tissue engineering, and cement for bone regeneration. Amylopectin is usually combined with a synthetic polymer with higher elastic modulus and yield strength. This allows for starch to withstand the higher fluid flow and mechanical forces prevalent in bone, cardiac, and endothelial tissue. | 2 | Carbohydrates |
Red blood cells have a consistent lifespan of 120 days and are accessible for measurement of glycated hemoglobin. Measurement of HbA1c—the predominant form of glycated hemoglobin—enables medium-term blood sugar control to be monitored in diabetes.
Some glycation products are implicated in many age-related chronic diseases, including cardiovascular diseases (the endothelium, fibrinogen, and collagen are damaged) and Alzheimer's disease (amyloid proteins are side-products of the reactions progressing to AGEs).
Long-lived cells (such as nerves and different types of brain cell), long-lasting proteins (such as crystallins of the lens and cornea), and DNA can sustain substantial glycation over time. Damage by glycation results in stiffening of the collagen in the blood vessel walls, leading to high blood pressure, especially in diabetes. Glycations also cause weakening of the collagen in the blood vessel walls, which may lead to micro- or macro-aneurysm; this may cause strokes if in the brain. | 2 | Carbohydrates |
There is currently no evidence supporting targeted temperature management use in humans and clinical trials have not been completed. Most of the data concerning hypothermia's effectiveness in treating stroke is limited to animal studies. These studies have focused primarily on ischemic stroke as opposed to hemorrhagic stroke, as hypothermia is associated with a lower clotting threshold. In these animal studies, hypothermia was represented an effective neuroprotectant. The use of hypothermia to control intracranial pressure (ICP) after an ischemic stroke was found to be both safe and practical. | 0 | Cryobiology |
Galactogen has been reported in the albumen gland of pulmonate snails such as Helix pomatia, Limnaea stagnalis, Oxychilus cellarius, Achatina fulica, Aplexa nitens and Otala lactea, Bulimnaea megasoma, Ariolimax columbianis, Ariophanta, Biomphalaria glabrata, and Strophochelius oblongus. This polysaccharide was also identified in the Caenogastropoda Pila virens and Viviparus, Pomacea canaliculata, and Pomacea maculata.
In adult gastropods, galactogen is confined to the albumen gland, showing a large variation in content during the year and reaching a higher peak in the reproductive season. During the reproductive season, this polysaccharide is rapidly restored in the albumen gland after being transferred to the eggs, decreasing its total amount only after repeated ovipositions. In Pomacea canaliculata snails, galactogen would act, together with perivitellins, as a main limiting factor of reproduction. This polysaccharide has been identified in the Golgi zone of the secretory cells from the albumen gland in the form of discrete granules 200 Å in diameter. The appearance of galactogen granules within the secretory globules suggests that this is the site of biosynthesis of the polysaccharide.
Apart from the albumen gland, galactogen is also found as a major component of the perivitelline fluid from the snail eggs, comprising the main energy source for the developing embryo. | 2 | Carbohydrates |
In solid-state physics, the Landau–Lifshitz equation (LLE), named for Lev Landau and Evgeny Lifshitz, is a partial differential equation describing time evolution of magnetism in solids, depending on 1 time variable and 1, 2, or 3 space variables. | 3 | Magnetic Ordering |
Blacklights are a common tool for rock-hunting and identification of minerals by their fluorescence. The most common minerals and rocks that glow under UV light are fluorite, calcite, aragonite, opal, apatite, chalcedony, corundum (ruby and sapphire), scheelite, selenite, smithsonite, sphalerite, sodalite. The first person to observe fluorescence in minerals was George Stokes in 1852. He noted the ability of fluorite to produce a blue glow when illuminated with ultraviolet light and called this phenomenon “fluorescence” after the mineral fluorite. Lamps used to visualise seams of fluorite and other fluorescent minerals are commonly used in mines but they tend to be on an industrial scale. The lamps need to be short wavelength to be useful for this purpose and of scientific grade. UVP range of hand held UV lamps are ideal for this purpose and are used by Geologists to identify the best sources of fluorite in mines or potential new mines. Some transparent selenite crystals exhibit an “hourglass” pattern under UV light that is not visible in natural light. These crystals are also phosphorescent. Limestone, marble, and travertine can glow because of calcite presence. Granite, syenite, and granitic pegmatite rocks can also glow. | 4 | Ultraviolet Radiation |
The demagnetizing field is the magnetic field created by the magnetic sample upon itself. The associated energy is:
where H is the demagnetizing field. This field depends on the magnetic configuration itself, and it can be found by solving:
where −∇·M is sometimes called magnetic charge density. The solution of these equations (c.f. magnetostatics) is:
where r is the vector going from the current integration point to the point where H is being calculated.
It is worth noting that the magnetic charge density can be infinite at the edges of the sample, due to M changing discontinuously from a finite value inside to zero outside of the sample. This is usually dealt with by using suitable boundary conditions on the edge of the sample.
The energy of the demagnetizing field favors magnetic configurations that minimize magnetic charges. In particular, on the edges of the sample, the magnetization tends to run parallel to the surface. In most cases it is not possible to minimize this energy term at the same time as the others. The static equilibrium then is a compromise that minimizes the total magnetic energy, although it may not minimize individually any particular term. | 3 | Magnetic Ordering |
In condensed matter physics, an Arrott plot is a plot of the square of the magnetization of a substance, against the ratio of the applied magnetic field to magnetization at one (or several) fixed temperature(s). Arrott plots are an easy way of determining the presence of ferromagnetic order in a material. They are named after American physicist Anthony Arrott who introduced them as a technique for studying magnetism in 1957. | 3 | Magnetic Ordering |
Mostly, SIRs have been investigated and used for the recovery of heavy metals. Applications include the removal of cadmium, vanadium, copper, chrome, iridium, etc. | 1 | Separation Processes |
In Australia, the average age of women undergoing ART treatment is 35.5 years among those using their own eggs (one in four being 40 or older) and 40.5 years among those using donated eggs. While IVF is available in Australia, Australians using IVF are unable to choose their baby's gender. | 0 | Cryobiology |
The phenomenon of hysteresis in ferromagnetic materials is the result of two effects: rotation of magnetization and changes in size or number of magnetic domains. In general, the magnetization varies (in direction but not magnitude) across a magnet, but in sufficiently small magnets, it does not. In these single-domain magnets, the magnetization responds to a magnetic field by rotating. Single-domain magnets are used wherever a strong, stable magnetization is needed (for example, magnetic recording).
Larger magnets are divided into regions called domains. Across each domain, the magnetization does not vary; but between domains are relatively thin domain walls in which the direction of magnetization rotates from the direction of one domain to another. If the magnetic field changes, the walls move, changing the relative sizes of the domains. Because the domains are not magnetized in the same direction, the magnetic moment per unit volume is smaller than it would be in a single-domain magnet; but domain walls involve rotation of only a small part of the magnetization, so it is much easier to change the magnetic moment. The magnetization can also change by addition or subtraction of domains (called nucleation and denucleation). | 3 | Magnetic Ordering |
The reaction mechanism is that of the related Hofmann degradation.
At first the carbonic acid amide (1) reacts with the sodium hypochlorite. After separate water and chloride an amine with a free bond is built 2. The intermediate (3) is generated by rearrangement. At this point two different mechanisms are possible. In the mechanism above two methanol molecules reacts with the intermediate. So is the compound (4) generated. After this carbon dioxide, water, ammonium and methanol are separated in different steps. At least it is protonated into an aldehyde (5).
Until the intermediate (3) the mechanism is the same like above. Then only one methanol-atom is added 4. With a protonation water, methanol and carbon dioxide are separated. An ammonium ion (5) is generated. During the hydrolysis a hydroxylic group is built 6. An aldehyde (7) is generated by separating an ammonium ion. | 2 | Carbohydrates |
Psychrophiles are protected from freezing and the expansion of ice by ice-induced desiccation and vitrification (glass transition), as long as they cool slowly. Free living cells desiccate and vitrify between −10 °C and −26 °C. Cells of multicellular organisms may vitrify at temperatures below −50 °C. The cells may continue to have some metabolic activity in the extracellular fluid down to these temperatures, and they remain viable once restored to normal temperatures.
They must also overcome the stiffening of their lipid cell membrane, as this is important for the survival and functionality of these organisms. To accomplish this, psychrophiles adapt lipid membrane structures that have a high content of short, unsaturated fatty acids. Compared to longer saturated fatty acids, incorporating this type of fatty acid allows for the lipid cell membrane to have a lower melting point, which increases the fluidity of the membranes. In addition, carotenoids are present in the membrane, which help modulate the fluidity of it.
Antifreeze proteins are also synthesized to keep psychrophiles internal space liquid, and to protect their DNA when temperatures drop below waters freezing point. By doing so, the protein prevents any ice formation or recrystallization process from occurring.
The enzymes of these organisms have been hypothesized to engage in an activity-stability-flexibility relationship as a method for adapting to the cold; the flexibility of their enzyme structure will increase as a way to compensate for the freezing effect of their environment.
Certain cryophiles, such as Gram-negative bacteria Vibrio and Aeromonas spp., can transition into a viable but nonculturable (VBNC) state. During VBNC, a micro-organism can respire and use substrates for metabolism – however, it cannot replicate. An advantage of this state is that it is highly reversible. It has been debated whether VBNC is an active survival strategy or if eventually the organism's cells will no longer be able to be revived. There is proof however it may be very effective – Gram positive bacteria Actinobacteria have been shown to have lived about 500,000 years in the permafrost conditions of Antarctica, Canada, and Siberia. | 0 | Cryobiology |
Wayne Campbell at Massey University, New Zealand, has experimented with a wide variety of organic dyes based on porphyrin. In nature, porphyrin is the basic building block of the hemoproteins, which include chlorophyll in plants and hemoglobin in animals. He reports efficiency on the order of 5.6% using these low-cost dyes. | 4 | Ultraviolet Radiation |
To cope with high volume mass flows and for application, where a changing physical location of the sensor-based sorting process is of no benefit for the financial feasibility of the operation, stationary installations are applied. Another reason for applying stationary installations are multistage (Rougher, Scavenger, Cleaner) sensor-based ore sorting processes. Within stationary installations, sorters are usually located in parallel, which allows transport of the discharge fractions with one product and one waste belt respectively, which decreases plant footprint and amount of conveyors. | 1 | Separation Processes |
The microscope setup is based on an inverted microscope design. An automated stage is used to record larger areas by mosaicing a series of single adjacent frames. The LED light is focused using a ball lens with a short focal length onto the sample surface in an oblique-angle cis-illumination scheme since standard microscopy optics do not transmit UV light efficiently. No dichroic mirror or filter is required as microscope objectives are opaque to UV excitation light. The emitted fluorescence light is collected using a long-working-distance objective and focused via a tube lens onto a CCD camera.
Specimens are submerged in exogenous dye for 10 seconds and then briefly washed in water or phosphate-buffered saline (PBS). The resulting stained specimens generate bright enough signals for direct and interpretable visualization through microscope eyepiece. | 4 | Ultraviolet Radiation |
Both the formation and degradation of amylopectin is important to the metabolic processes of organisms. Amylopectin is one of the two dominant components of starch, and starch is a successful storage molecule for energy. Because of this, it is synthesized and broken down in most plants and cyanobacteria. In fact, amylopectin seems to rival glycogen, the energy storage molecule in animals, because it is able to store more glucose units and henceforth more energy.
The synthesis of amylopectin depends on the combined efforts of four different enzymes. These four different enzymes are:
# ADP glucose pyrophosphorylase (AGPase)
# soluble starch synthase (SS)
# starch branching enzyme (BE)
# starch debranching enzyme (DBE)
Amylopectin is synthesized by the linkage of α(1→4) Glycosidic bonds. The extensive branching of amylopectin (α(1→6) Glycosidic bond) is initiated by BE and this is what differentiates amylose from amylopectin. DBE is also needed during this synthesis process to regulate the distribution of these branches.
The breakdown of amylopectin has been studied in context with the breakdown of starch in animals and humans. Starch is mostly composed of amylopectin and amylose, but amylopectin has been shown to degrade more easily. The reason is most likely because amylopectin is highly branched and these branches are more available to digestive enzymes. In contrast, amylose tends to form helices and contain hydrogen bonding.
The breakdown of starch is dependent on three enzymes, among others:
# alpha, beta amylases
# phosphorylases
# starch debranching enzyme (DBE)
There are enzymes that are involved in the synthesis and degradation of amylopectin that have isoforms that display different relationships with proteins and other enzymes. For example, there are many versions of SS (Starch Synthase). Even the third isoform (SS-III) has two different versions. It is believed that SS-I and SS-II both have a role in elongating the chains of amylopectin branches. SS-IV is also thought to be responsible for the leaf-like structure of starch granule clusters. | 2 | Carbohydrates |
An endotransglucosylase is an enzyme which is able to transfer a saccharide unit from one saccharide to another. | 2 | Carbohydrates |
Researchers at the École Polytechnique Fédérale de Lausanne and at the Université du Québec à Montréal claim to have overcome two of the DSC's major issues:
* "New molecules" have been created for the electrolyte, resulting in a liquid or gel that is transparent and non-corrosive, which can increase the photovoltage and improve the cell's output and stability.
* At the cathode, platinum was replaced by cobalt sulfide, which is far less expensive, more efficient, more stable and easier to produce in the laboratory. | 4 | Ultraviolet Radiation |
To help mitigate inbreeding depression for two endangered species, the Black-footed ferret(Mustela nigripes), Revive & Restore facilitates on-going efforts to clone individuals from historic cell lines stored at the San Diego Zoo Wildlife Alliance Frozen Zoo. The program seeks to restore genetic variation lost from the living gene pool.
On December 10, 2020, the world's first cloned black-footed ferret was born. This ferret, named Elizabeth Ann, marked the first time a U.S. endangered species was successfully cloned.
The cells of two 1980s wild-caught black-footed ferrets that never bred in captivity were preserved in the San Diego Wildlife Alliance Frozen Zoo. One of them was cloned to increase genetic diversity in this species in December 2020. More clones of both are planned. They will initially be bred separately from the non-cloned population. | 0 | Cryobiology |
Some hepatitis C viral glycoproteins may attach to C-type lectins on the host cell surface (liver cells) to initiate infection. To avoid clearance from the body by the innate immune system, pathogens (e.g., virus particles and bacteria that infect human cells) often express surface lectins known as adhesins and hemagglutinins that bind to tissue-specific glycans on host cell-surface glycoproteins and glycolipids. Multiple viruses, including influenza and several viruses in the Paramyxoviridae family, use this mechanism to bind and gain entry to target cells. | 2 | Carbohydrates |
Tissue engineering aims to generate functional constructs which could replace or improve damaged or infected tissues or whole organs. Many of these constructs lead to infected tissue around the implant area. Coating these materials in amylopectin allows reduction in this infectious reaction. Since amylopectin is mainly used as a coating around these constructs in as it prevents following immune reactions. Since amylopectin is derived directly from a natural polysaccharide, it integrates well with tissues and cells. However, mechanical properties of amylopectin are not optimal due to its high level of crosslinking. This can be avoided by the formation of amylopectin fibers or by forming a nanocomposite with another more rigid polymer. | 2 | Carbohydrates |
Stripping is commonly used in industrial applications to remove harmful contaminants from waste streams. One example would be the removal of TBT and PAH contaminants from harbor soils. The soils are dredged from the bottom of contaminated harbors, mixed with water to make a slurry and then stripped with steam. The cleaned soil and contaminant rich steam mixture are then separated. This process is able to decontaminate soils almost completely.
Steam is also frequently used as a stripping agent for water treatment. Volatile organic compounds are partially soluble in water and because of environmental considerations and regulations, must be removed from groundwater, surface water, and wastewater. These compounds can be present because of industrial, agricultural, and commercial activity. | 1 | Separation Processes |
The "upper phase" is formed by the more hydrophobic polyethylene glycol (PEG), which is of lower density than the "lower phase," consisting of the more hydrophilic and denser dextran solution.
Although PEG is inherently denser than water, it occupies the upper layer. This is believed to be due to its solvent ordering properties, which excludes excess water, creating a low density water environment. The degree of polymerization of PEG also affects the phase separation and the partitioning of molecules during extraction. | 1 | Separation Processes |
AFPs work through an interaction with small ice crystals that is similar to an enzyme-ligand binding mechanism which inhibits recrystallization of ice. This explanation of the interruption of the ice crystal structure by the AFP has come to be known as the adsorption-inhibition hypothesis.
According to this hypothesis, AFPs disrupt the thermodynamically favourable growth of an ice crystal via kinetic inhibition of contact between solid ice and liquid water. In this manner, the nucleation sites of the ice crystal lattice are blocked by the AFP, inhibiting the rapid growth of the crystal that could be fatal for the organism. In physical chemistry terms, the AFPs adsorbed onto the exposed ice crystal force the growth of the ice crystal in a convex fashion as the temperature drops, which elevates the ice vapour pressure at the nucleation sites. Ice vapour pressure continues to increase until it reaches equilibrium with the surrounding solution (water), at which point the growth of the ice crystal stops.
The aforementioned effect of AFPs on ice crystal nucleation is lost at the thermal hysteresis point. At a certain low temperature, the maximum convexity of the ice nucleation site is reached. Any further cooling will actually result in a "spreading" of the nucleation site away from this convex region, causing rapid, uncontrollable nucleation of the ice crystal. The temperature at which this phenomenon occurs is the thermal hysteresis point.<br>
The adsorption-inhibition hypothesis is further supported by the observation that antifreeze activity increases with increasing AFP concentration – the more AFPs adsorb onto the forming ice crystal, the more crowded these proteins become, making ice crystal nucleation less favourable.
In the R. inquisitor beetle, AFPs are found in the haemolymph, a fluid that bathes all the cells of the beetle and fills a cavity called the haemocoel. The presence of AFPs in R. inquisitor allows the tissues and fluids within the beetle to withstand freezing up to -30 °C (the thermal hysteresis point for this AFP). This strategy provides an obvious survival benefit to these beetles, who are endemic to cold climates, such as Scandinavia, Siberia, and Alaska. | 0 | Cryobiology |
Species containing AFPs may be classified as
Freeze avoidant: These species are able to prevent their body fluids from freezing altogether. Generally, the AFP function may be overcome at extremely cold temperatures, leading to rapid ice growth and death.
Freeze tolerant: These species are able to survive body fluid freezing. Some freeze tolerant species are thought to use AFPs as cryoprotectants to prevent the damage of freezing, but not freezing altogether. The exact mechanism is still unknown. However, it is thought AFPs may inhibit recrystallization and stabilize cell membranes to prevent damage by ice. They may work in conjunction with ice nucleating proteins (INPs) to control the rate of ice propagation following freezing. | 0 | Cryobiology |
The first step in the metabolism of fructose is the phosphorylation of fructose to fructose 1-phosphate by fructokinase (Km = 0.5 mM, ≈ 9 mg/100 ml), thus trapping fructose for metabolism in the liver. Hexokinase IV (Glucokinase), also occurs in the liver and would be capable of phosphorylating fructose to fructose 6-phosphate (an intermediate in the gluconeogenic pathway); however, it has a relatively high Km (12 mM) for fructose and, therefore, essentially all of the fructose is converted to fructose-1-phosphate in the human liver. Much of the glucose, on the other hand, is not phosphorylated (Km of hepatic glucokinase (hexokinase IV) = 10 mM), passes through the liver directed toward peripheral tissues, and is taken up by the insulin-dependent glucose transporter, GLUT 4, present on adipose tissue and skeletal muscle.
Fructose-1-phosphate then undergoes hydrolysis by fructose-1-phosphate aldolase (aldolase B) to form dihydroxyacetone phosphate (DHAP) and glyceraldehyde; DHAP can either be isomerized to glyceraldehyde 3-phosphate by triosephosphate isomerase or undergo reduction to glycerol 3-phosphate by glycerol 3-phosphate dehydrogenase. The glyceraldehyde produced may also be converted to glyceraldehyde 3-phosphate by glyceraldehyde kinase or converted to glycerol 3-phosphate by glyceraldehyde 3-phosphate dehydrogenase. The metabolism of fructose at this point yields intermediates in gluconeogenic pathway leading to glycogen synthesis, or can be oxidized to pyruvate and reduced to lactate, or be decarboxylated to acetyl CoA in the mitochondria and directed toward the synthesis of free fatty acid, resulting finally in triglyceride synthesis. | 2 | Carbohydrates |
There is a market for vials of processed sperm and for various reasons a sperm bank may sell-on stocks of vials which it holds known as onselling. The costs of screening of donors and storage of frozen donor sperm vials are not insignificant and in practice most sperm banks will try to dispose of all samples from an individual donor. The onselling of sperm therefore enables a sperm bank to maximize the sale and disposal of sperm samples which it has processed. The reasons for onselling may also be where part of, or even the main business of, a particular sperm bank is to process and store sperm rather than to use it in fertility treatments, or where a sperm bank is able to collect and store more sperm than it can use within nationally set limits. In the latter case a sperm bank may onsell sperm from a particular donor for use in another jurisdiction after the number of pregnancies achieved from that donor has reached its national maximum.
Sperm banks may supply other sperm banks or a fertility clinic with donor sperm to be used for achieving pregnancies.
Sperm banks may also supply sperm for research or educational purposes. | 0 | Cryobiology |
Filtrate is the waste that has been discharge in vacuum ceramic filters through the waste stream. During cake washing, a wash liquid is sprayed on the cake solids to remove impurities or additional filtrate. The filtrate goes into filtrate tank and is drained through a discharge system. However, the filtrate is recyclable and has low suspended solid content. Thus, it can be recycled through the system without further treatment. Filtrate is used to flush the disc during back flow washing to clean the micro-porous structure and remove any residual cake. | 1 | Separation Processes |
Allison Hubel is an American mechanical engineer and cryobiologist who applies her expertise in heat transfer to study the cryopreservation of biological tissue. She is a professor of mechanical engineering at the University of Minnesota, where she directs the Biopreservation Core Resource and the Technological Leadership Institute, and is president-elect of the Society for Cryobiology. | 0 | Cryobiology |
Glycogen synthase catalyzes the conversion of the glucosyl (Glc) moiety of uridine diphosphate glucose (UDP-Glc) into glucose to be incorporated into glycogen via an α(1→4) glycosidic bond. However, since glycogen synthase requires an oligosaccharide primer as a glucose acceptor, it relies on glycogenin to initiate de novo glycogen synthesis.
In a recent study of transgenic mice, an overexpression of glycogen synthase and an overexpression of phosphatase both resulted in excess glycogen storage levels. This suggests that glycogen synthase plays an important biological role in regulating glycogen/glucose levels and is activated by dephosphorylation. | 2 | Carbohydrates |
Typically, the mixture of "compound A" and "impurity B" is dissolved in the smallest amount of hot solvent to fully dissolve the mixture, thus making a saturated solution. The solution is then allowed to cool. As the solution cools the solubility of compounds in the solution drops. This results in the desired compound dropping (recrystallizing) from the solution. The slower the rate of cooling, the bigger the crystals form.
In an ideal situation the solubility product of the impurity, B, is not exceeded at any temperature. In that case, the solid crystals will consist of pure A and all the impurities will remain in the solution. The solid crystals are collected by filtration and the filtrate is discarded. If the solubility product of the impurity is exceeded, some of the impurities will co-precipitate. However, because of the relatively low concentration of the impurity, its concentration in the precipitated crystals will be less than its concentration in the original solid. Repeated recrystallization will result in an even purer crystalline precipitate. The purity is checked after each recrystallization by measuring the melting point, since impurities lower the melting point. NMR spectroscopy can also be used to check the level of impurity. Repeated recrystallization results in some loss of material because of the non-zero solubility of compound A.
The crystallization process requires an initiation step, such as the addition of a "seed" crystal. In the laboratory, a minuscule fragment of glass, produced by scratching the side of the glass recrystallization vessel, may provide the nucleus on which crystals may grow.
Successful recrystallization depends on finding the right solvent. This is usually a combination of prediction/experience and trial/error. The compounds must be more soluble at higher temperatures than at lower temperatures. Any insoluble impurity is removed by the technique of hot filtration. | 1 | Separation Processes |
Superparamagnetism sets a limit on the storage density of hard disk drives due to the minimum size of particles that can be used. This limit on areal-density is known as the superparamagnetic limit.
* Older hard disk technology uses longitudinal recording. It has an estimated limit of 100 to 200 Gbit/in.
* Current hard disk technology uses perpendicular recording. drives with densities of approximately 1 Tbit/in are available commercially. This is at the limit for conventional magnetic recording that was predicted in 1999.
* Future hard disk technologies currently in development include: heat-assisted magnetic recording (HAMR) and microwave-assisted magnetic recording (MAMR), which use materials that are stable at much smaller sizes. They require localized heating or microwave excitation before the magnetic orientation of a bit can be changed. Bit-patterned recording (BPR) avoids the use of fine-grained media and is another possibility. In addition, magnetic recording technologies based on topological distortions of the magnetization, known as skyrmions, have been proposed. | 3 | Magnetic Ordering |
Single-crystal alloys exhibit superior microstrain, but are vulnerable to yielding due to the anisotropic mechanical properties of most metals. It has been observed that for polycrystalline alloys with a high area coverage of preferential grains for microstrain, the mechanical properties (ductility) of magnetostrictive alloys can be significantly improved. Targeted metallurgical processing steps promote abnormal grain growth of {011} grains in galfenol and alfenol thin sheets, which contain two easy axes for magnetic domain alignment during magnetostriction. This can be accomplished by adding particles such as boride species and niobium carbide () during initial chill casting of the ingot.
For a polycrystalline alloy, an established formula for the magnetostriction, λ, from known directional microstrain measurements is:
λ = 1/5(2λ+3λ)
During subsequent hot rolling and recrystallization steps, particle strengthening occurs in which the particles introduce a “pinning” force at grain boundaries that hinders normal (stochastic) grain growth in an annealing step assisted by a atmosphere. Thus, single-crystal-like texture (~90% {011} grain coverage) is attainable, reducing the interference with magnetic domain alignment and increasing microstrain attainable for polycrystalline alloys as measured by semiconducting strain gauges. These surface textures can be visualized using electron backscatter diffraction (EBSD) or related diffraction techniques. | 3 | Magnetic Ordering |
Kenneth Storey studied biochemistry at the University of Calgary (B.Sc. 71) and zoology at the University of British Columbia (Ph.D. 74). Storey is a Professor of Biochemistry, cross-appointed in the Departments of Biology, Chemistry and Neuroscience and holds the Canada Research Chair in Molecular Physiology at Carleton University in Ottawa, Canada.
Storey is an elected fellow of the Royal Society of Canada, of the Society for Cryobiology and of the American Association for the Advancement of Science. He has won fellowships and awards for research excellence including the Fry medal from the Canadian Society of Zoologists (2011), the Flavelle medal from the Royal Society of Canada (2010), Ottawa Life Sciences Council Basic Research Award (1998), a [https://killamprogram.canadacouncil.ca/ Killam Senior Research Fellowship] (1993–1995), the Ayerst Award from the [https://csmb-scbm.ca/ Canadian Society for Molecular Biosciences] (1989), an E.W.R. Steacie Memorial Fellowship from the Natural Sciences and Engineering Research Council of Canada (1984–1986), and four Carleton University Research Achievement Awards. Storey is the author of over 1200 research articles, the editor of seven books, has given over 500 talks at conferences and institutes worldwide, and organized numerous international symposia. | 0 | Cryobiology |
According to the Landau theory applied to the mean field picture for magnetism, the free energy of a ferromagnetic material close to a phase transition can be written as:
where , the magnetization, is the order parameter, is the applied magnetic field, is the critical temperature, and are material constants.
Close to the phase transition, this gives a relation for the magnetization order parameter:
where is a dimensionless measure of the temperature.
Thus in a graph plotting vs. for various temperatures, the line without an intercept corresponds to the dependence at the critical temperature. Thus along with providing evidence for the existence of a ferromagnetic phase, the Arrott plot can also be used to determine the critical temperature for the phase transition. | 3 | Magnetic Ordering |
Carbohydrate consumed in food yields 3.87 kilocalories of energy per gram for simple sugars, and 3.57 to 4.12 kilocalories per gram for complex carbohydrate in most other foods. Relatively high levels of carbohydrate are associated with processed foods or refined foods made from plants, including sweets, cookies and candy, table sugar, honey, soft drinks, breads and crackers, jams and fruit products, pastas and breakfast cereals. Lower amounts of digestible carbohydrate are usually associated with unrefined foods as these foods have more fiber, including beans, tubers, rice, and unrefined fruit. Animal-based foods generally have the lowest carbohydrate levels, although milk does contain a high proportion of lactose.
Organisms typically cannot metabolize all types of carbohydrate to yield energy. Glucose is a nearly universal and accessible source of energy. Many organisms also have the ability to metabolize other monosaccharides and disaccharides but glucose is often metabolized first. In Escherichia coli, for example, the lac operon will express enzymes for the digestion of lactose when it is present, but if both lactose and glucose are present the lac operon is repressed, resulting in the glucose being used first (see: Diauxie). Polysaccharides are also common sources of energy. Many organisms can easily break down starches into glucose; most organisms, however, cannot metabolize cellulose or other polysaccharides like chitin and arabinoxylans. These carbohydrate types can be metabolized by some bacteria and protists. Ruminants and termites, for example, use microorganisms to process cellulose. Even though these complex carbohydrates are not very digestible, they represent an important dietary element for humans, called dietary fiber. Fiber enhances digestion, among other benefits.
The Institute of Medicine recommends that American and Canadian adults get between 45 and 65% of dietary energy from whole-grain carbohydrates. The Food and Agriculture Organization and World Health Organization jointly recommend that national dietary guidelines set a goal of 55–75% of total energy from carbohydrates, but only 10% directly from sugars (their term for simple carbohydrates). A 2017 Cochrane Systematic Review concluded that there was insufficient evidence to support the claim that whole grain diets can affect cardiovascular disease. | 2 | Carbohydrates |
In Saxon settlements such as one identified in Northumberland as Bedes Ad Gefrin (now called Yeavering) the buildings were shown by an excavators reconstruction to have opposed entries. In barns a draught created by the use of these opposed doorways was used in winnowing.
The technique developed by the Chinese was not adopted in Europe until the 18th century when winnowing machines used a sail fan. The rotary winnowing fan was exported to Europe, brought there by Dutch sailors between 1700 and 1720. Apparently, they had obtained them from the Dutch settlement of Batavia in Java, Dutch East Indies. The Swedes imported some from south China at about the same time and Jesuits had taken several to France from China by 1720. Until the beginning of the 18th century, no rotary winnowing fans existed in the West. | 1 | Separation Processes |
Speromagnetism is the equivalent of antiferromagnetism for a disordered system with random magnetic moments. It is defined by short range correlations of locked magnetic moments within small noncrystalline regions, without average long range correlations. Speromagnets do not have a net magnetic moment.
An example of a solid presenting speromagnetism is amorphous YFe and can be detected using Mössbauer spectroscopy. | 3 | Magnetic Ordering |
Hysteretic models are mathematical models capable of simulating complex nonlinear behavior (hysteresis) characterizing mechanical systems and materials used in different fields of engineering, such as aerospace, civil, and mechanical engineering. Some examples of mechanical systems and materials having hysteretic behavior are:
* materials, such as steel, reinforced concrete, wood;
* structural elements, such as steel, reinforced concrete, or wood joints;
* devices, such as seismic isolators and dampers.
Each subject that involves hysteresis has models that are specific to the subject. In addition, there are hysteretic models that capture general features of many systems with hysteresis. An example is the Preisach model of hysteresis, which represents a hysteresis nonlinearity as a linear superposition of square loops called non-ideal relays. Many complex models of hysteresis arise from the simple parallel connection, or superposition, of elementary carriers of hysteresis termed hysterons.
A simple and intuitive parametric description of various hysteresis loops may be found in the Lapshin model. Along with the smooth loops, substitution of trapezoidal, triangular or rectangular pulses instead of the harmonic functions allows piecewise-linear hysteresis loops frequently used in discrete automatics to be built in the model. There are implementations of the hysteresis loop model in Mathcad and in R programming language.
The Bouc–Wen model of hysteresis is often used to describe non-linear hysteretic systems. It was introduced by Bouc and extended by Wen, who demonstrated its versatility by producing a variety of hysteretic patterns. This model is able to capture in analytical form, a range of shapes of hysteretic cycles which match the behaviour of a wide class of hysteretical systems; therefore, given its versability and mathematical tractability, the Bouc–Wen model has quickly gained popularity and has been extended and applied to a wide variety of engineering problems, including multi-degree-of-freedom (MDOF) systems, buildings, frames, bidirectional and torsional response of hysteretic systems two- and three-dimensional continua, and soil liquefaction among others. The Bouc–Wen model and its variants/extensions have been used in applications of structural control, in particular in the modeling of the behaviour of magnetorheological dampers, base isolation devices for buildings and other kinds of damping devices; it has also been used in the modelling and analysis of structures built of reinforced concrete, steel, masonry and timber.. The most important extension of Bouc-Wen Model was carried out by Baber and Noori and later by Noori and co-workers. That extended model, named, BWBN, can reproduce the complex shear pinching or slip-lock phenomenon that earlier model could not reproduce. The BWBN model has been widely used in a wide spectrum of applications and implementations are available in software such as OpenSees.
Hysteretic models may have a generalized displacement as input variable and a generalized force as output variable, or vice versa. In particular, in rate-independent hysteretic models, the output variable does not depend on the rate of variation of the input one.
Rate-independent hysteretic models can be classified into four different categories depending on the type of equation that needs to be solved to compute the output variable:
* algebraic models
* transcendental models
* differential models
* integral models | 3 | Magnetic Ordering |
Although most previous and current research on frustration focuses on spin systems, the phenomenon was first studied in ordinary ice. In 1936 Giauque and Stout published The Entropy of Water and the Third Law of Thermodynamics. Heat Capacity of Ice from 15 K to 273 K, reporting calorimeter measurements on water through the freezing and vaporization transitions up to the high temperature gas phase. The entropy was calculated by integrating the heat capacity and adding the latent heat contributions; the low temperature measurements were extrapolated to zero, using Debyes then recently derived formula. The resulting entropy, S = 44.28 cal/(K·mol) = 185.3 J/(mol·K) was compared to the theoretical result from statistical mechanics of an ideal gas, S = 45.10 cal/(K·mol) = 188.7 J/(mol·K). The two values differ by S' = 0.82 ± 0.05 cal/(K·mol) = 3.4 J/(mol·K). This result was then explained by Linus Pauling to an excellent approximation, who showed that ice possesses a finite entropy (estimated as 0.81 cal/(K·mol) or 3.4 J/(mol·K)) at zero temperature due to the configurational disorder intrinsic to the protons in ice.
In the hexagonal or cubic ice phase the oxygen ions form a tetrahedral structure with an O–O bond length 2.76 Å (276 pm), while the O–H bond length measures only 0.96 Å (96 pm). Every oxygen (white) ion is surrounded by four hydrogen ions (black) and each hydrogen ion is surrounded by 2 oxygen ions, as shown in Figure 5. Maintaining the internal HO molecule structure, the minimum energy position of a proton is not half-way between two adjacent oxygen ions. There are two equivalent positions a hydrogen may occupy on the line of the O–O bond, a far and a near position. Thus a rule leads to the frustration of positions of the proton for a ground state configuration: for each oxygen two of the neighboring protons must reside in the far position and two of them in the near position, so-called ‘ice rules’. Pauling proposed that the open tetrahedral structure of ice affords many equivalent states satisfying the ice rules.
Pauling went on to compute the configurational entropy in the following way: consider one mole of ice, consisting of N O and 2N protons. Each O–O bond has two positions for a proton, leading to 2 possible configurations. However, among the 16 possible configurations associated with each oxygen, only 6 are energetically favorable, maintaining the HO molecule constraint. Then an upper bound of the numbers that the ground state can take is estimated as Ω (). Correspondingly the configurational entropy S = kln(Ω) = Nkln() = 0.81 cal/(K·mol) = 3.4 J/(mol·K) is in amazing agreement with the missing entropy measured by Giauque and Stout.
Although Pauling's calculation neglected both the global constraint on the number of protons and the local constraint arising from closed loops on the Wurtzite lattice, the estimate was subsequently shown to be of excellent accuracy. | 3 | Magnetic Ordering |
Ultraviolet light can be generated by some light-emitting diodes, but wavelengths shorter than 380 nm are uncommon, and the emission peaks are broad, so only the very lowest energy UV photons are emitted, within predominant not visible light. | 4 | Ultraviolet Radiation |
There are a great variety of applications of the hysteresis in ferromagnets. Many of these make use of their ability to retain a memory, for example magnetic tape, hard disks, and credit cards. In these applications, hard magnets (high coercivity) like iron are desirable, such that as much energy is absorbed as possible during the write operation and the resultant magnetized information is not easily erased.
On the other hand, magnetically soft (low coercivity) iron is used for the cores in electromagnets. The low coercivity minimizes the energy loss associated with hysteresis, as the magnetic field periodically reverses in the presence of an alternating current. The low energy loss during a hysteresis loop is the reason why soft iron is used for transformer cores and electric motors. | 3 | Magnetic Ordering |
Radical Polymerization is used in the curing of acrylic resins in the presence of UV in the industry. Light energy from UV breaks apart photoinitiaters, forming radicals. The radical then react with the polymers, forming polymers with radical groups that then react with additional monomers. The monomer chain extends until it reaches another polymer and reacts with the polymer. Polymers will form with monomer bridges between them, thus leading to a cross-linked network. | 4 | Ultraviolet Radiation |
In Gaucher's disease, the enzyme glucocerebrosidase is nonfunctional and cannot break down glucocerebroside into glucose and ceramide in the lysosome. Affected macrophages, called Gaucher cells, have a distinct appearance similar to "wrinkled tissue paper" under light microscopy, because the substrates build-up within the lysosome. | 2 | Carbohydrates |
Glycogen synthase (UDP-glucose-glycogen glucosyltransferase) is a key enzyme in glycogenesis, the conversion of glucose into glycogen. It is a glycosyltransferase () that catalyses the reaction of UDP-glucose and (1,4---glucosyl) to yield UDP and (1,4---glucosyl). | 2 | Carbohydrates |
As the concentration of particles in a suspension is increased, a point is reached where particles are so close together that they no longer settle independently of one another and the velocity fields of the fluid displaced by adjacent particles, overlap. There is also a net upward flow of liquid displaced by the settling particles. This results in a reduced particle-settling velocity and the effect is known as hindered settling.
There is a common case for hindered settling occurs. the whole suspension tends to settle as a ‘blanket’ due to its extremely high particle concentration. This is known as zone settling, because it is easy to make a distinction between several different zones which separated by concentration discontinuities. Fig. 3 represents a typical batch-settling column tests on a suspension exhibiting zone-settling characteristics. There is a clear interface near the top of the column would be formed to separating the settling sludge mass from the clarified supernatant as long as leaving such a suspension to stand in a settling column. As the suspension settles, this interface will move down at the same speed. At the same time, there is an interface near the bottom between that settled suspension and the suspended blanket. After settling of suspension is complete, the bottom interface would move upwards and meet the top interface which moves downwards. | 1 | Separation Processes |
In chemistry, recrystallization is a procedure for purifying compounds. The most typical situation is that a desired "compound A" is contaminated by a small amount of "impurity B". There are various methods of purification that may be attempted (see Separation process), recrystallization being one of them. There are also different recrystallization techniques that can be used such as: | 1 | Separation Processes |
The most known empirical models in hysteresis are Preisach and Jiles-Atherton models. These models allow an accurate modeling of the hysteresis loop and are widely used in the industry. However, these models lose the connection with thermodynamics and the energy consistency is not ensured. A more recent model, with a more consistent thermodynamical foundation, is the vectorial incremental nonconservative consistent hysteresis (VINCH) model of Lavet et al. (2011) | 3 | Magnetic Ordering |
Thomson's experiments are an example of AMR, a property of a material in which a dependence of electrical resistance on the angle between the direction of electric current and direction of magnetization is observed. The effect arises in most cases from the simultaneous action of magnetization and spin-orbit interaction (exceptions related to non-collinear magnetic order notwithstanding, see Sec. 4(b) in the review ) and its detailed mechanism depends on the material. It can be for example due to a larger probability of s-d scattering of electrons in the direction of magnetization (which is controlled by the applied magnetic field). The net effect (in most materials) is that the electrical resistance has maximum value when the direction of current is parallel to the applied magnetic field. AMR of new materials is being investigated and magnitudes up to 50% have been observed in some uranium (but otherwise quite conventional) ferromagnetic compounds. Very recently, materials with extreme AMR have been identified driven by unconventional mechanisms such as a metal-insulator transition triggered by rotating the magnetic moments (while for some directions of magnetic moments, the system is semimetallic, for other directions a gap opens).
In polycrystalline ferromagnetic materials, the AMR can only depend on the angle between the magnetization and current direction
and (as long as the resistivity of the material can be described by a rank-two tensor), it must follow
where is the (longitudinal) resistivity of the film and are the resistivities for and , respectively. Associated with longitudinal resistivity, there is also transversal resistivity dubbed (somewhat confusingly[1]) the planar Hall effect. In monocrystals, resistivity depends also on individually.
To compensate for the non-linear characteristics and inability to detect the polarity of a magnetic field, the following structure is used for sensors. It consists of stripes of aluminum or gold placed on a thin film of permalloy (a ferromagnetic material exhibiting the AMR effect) inclined at an angle of 45°. This structure forces the current not to flow along the “easy axes” of thin film, but at an angle of 45°. The dependence of resistance now has a permanent offset which is linear around the null point. Because of its appearance, this sensor type is called barber pole.
The AMR effect is used in a wide array of sensors for measurement of Earth's magnetic field (electronic compass), for electric current measuring (by measuring the magnetic field created around the conductor), for traffic detection and for linear position and angle sensing. The biggest AMR sensor manufacturers are Honeywell, NXP Semiconductors, STMicroelectronics, and [http://www.sensitec.com Sensitec GmbH].
As theoretical aspects, I. A. Campbell, A. Fert, and O. Jaoul (CFJ) derived an expression of the AMR ratio for Ni-based alloys using the two-current model with s-s and s-d scattering processes, where s is a conduction electron and d is 3d states with the spin-orbit interaction. The AMR ratio is expressed as
with and , where , , and are a spin-orbit coupling constant (so-called ), an exchange field, and a resistivity for spin , respectively. In addition, recently, Satoshi Kokado et al. have obtained the general expression of the AMR ratio for 3d transition-metal ferromagnets by extending the CFJ theory to a more general one. The general expression can also be applied to half-metals. | 3 | Magnetic Ordering |
Tanning booths (also known as stand-up sunbeds) are vertical enclosures; the tanner stands during exposure, hanging onto straps or handrails, and is surrounded by tanning bulbs. In most models, the tanner closes a door, but there are open designs too. Some booths use the same electronics and lamps as tanning beds, but most have more lamps and are likely to use 100–160 watt lamps. They often have a maximum session of 7–15 minutes. There are other technical differences, or degrees of intensity, but for all practical intents, their function and safety are the same as a horizontal bed. Booths have a smaller footprint, which some commercial operators find useful. Some tanners prefer booths out of concern for hygiene, since the only shared surface is the floor. | 4 | Ultraviolet Radiation |
The Frozen Zoo at the San Diego Zoo's Institute for Conservation Research currently stores a collection of 8,400 samples from over 800 species and subspecies. Frozen Zoo at San Diego Zoo Conservation Research has acted as a forebear to similar projects at other zoos in the United States and Europe. However, there are still less than a dozen frozen zoos worldwide.
At the United Arab Emirates Breeding Centre for Endangered Arabian Wildlife (BCEAW) in Sharjah, the embryos stored include the extremely endangered Gordons wildcat (Felis silvestris gordoni) and the Arabian leopard (Panthera pardus nimr) (of which there are only 50 in the wild).
The Audubon Center for Research of Endangered Species, affiliated with the University of New Orleans, is maintaining a frozen zoo. In 2000 the Center implanted a frozen-thawed embryo from the highly endangered African wildcat into the uterus of a domestic house cat, resulting in a healthy male wildcat.
The Frozen Ark is a frozen zoo established in 2004 and jointly managed by the Zoological Society of London, the London Natural History Museum, and the University of Nottingham. This organization operates as a charity with many different departments including the DNA laboratory, consortium, taxon expert groups, and the database. In the DNA laboratory, samples are contained after collection from scientists, and different research projects are conducted there. The consortium acts as a bridge to bring together different, but important, groups from zoos, aquariums, museums, and universities. The taxon expert groups monitor the major phyla and lists like the IUCN Red List. The database is the essential piece as it holds all reports and records needed to perform all of the other functions for the charity. The hope for the future is for zoos and aquariums to be able to collect samples from their threatened and/or endangered species in house to help with conservation efforts. The collection and freezing of these samples allows for the distribution of gametes among populations. Samples can be collected from living hosts and from deceased hosts as well.
The University of Georgia's Regenerative Bioscience Center is building a frozen zoo. RBC Director Steven Stice and animal and dairy science assistant professor Franklin West created the facility with the thought of saving endangered cat species. The scientists have already extracted cells from a Sumatran tiger, which could be used for artificial insemination. Artificial insemination provides a remedy for animals who, due to anatomical or physiological reasons, are unable to reproduce in the natural way. Reproduction of stored genetic material also allows for the fostering of genetic improvements, and the prevention of inbreeding. Modern technology allows for genetic manipulation in animals without keeping them in captivity. However, the success of their restoration into the wild would require the application of new science and a sufficient amount of previously collected material. | 0 | Cryobiology |
Pure organochlorides like polyvinyl chloride (PVC) do not absorb any light above 220 nm. The initiation of photo-oxidation is instead caused by various irregularities in the polymer chain, such as structural defects as well as hydroperoxides, carbonyl groups, and double bonds.
Hydroperoxides formed during processing are the most important initiator to begin with, however their concentration decreases during photo-oxidation whereas carbonyl concentration increases, as such carbonyls may become the primary initiator over time.
Propagation steps involve the hydroperoxyl radical, which can abstract hydrogen from both hydrocarbon (-CH-) and organochloride (-CHCl-) sites in the polymer at comparable rates. Radicals formed at hydrocarbon sites rapidly convert to alkenes with loss of radical chlorine. This forms allylic hydrogens (shown in red) which are more susceptible to hydrogen abstraction leading to the formation of polyenes in zipper-like reactions.
When the polyenes contain at least eight conjugated double bonds they become coloured, leading to yellowing and eventual browning of the material. This is off-set slightly by longer polyenes being photobleached with atmospheric oxygen, however PVC does eventually discolour unless polymer stabilisers are present. Reactions at organochloride sites proceed via the usual hydroperoxyl and hydroperoxide before photolysis yields the α-chloro-alkoxyl radical. This species can undergo various reactions to give carbonyls, peroxide cross-links and beta scission products. | 4 | Ultraviolet Radiation |
Ultraviolet sterilizers are often used to help control unwanted microorganisms in aquaria and ponds. UV irradiation ensures that pathogens cannot reproduce, thus decreasing the likelihood of a disease outbreak in an aquarium.
Aquarium and pond sterilizers are typically small, with fittings for tubing that allows the water to flow through the sterilizer on its way from a separate external filter or water pump. Within the sterilizer, water flows as close as possible to the ultraviolet light source. Water pre-filtration is critical as water turbidity lowers UV-C penetration.
Many of the better UV sterilizers have long dwell times and limit the space between the UV-C source and the inside wall of the UV sterilizer device. | 4 | Ultraviolet Radiation |
For actuator applications, maximum rotation of magnetic moments leads to the highest possible magnetostriction output. This can be achieved by processing techniques such as stress annealing and field annealing. However, mechanical pre-stresses can also be applied to thin sheets to induce alignment perpendicular to actuation as long as the stress is below the buckling limit. For example, it has been demonstrated that applied compressive pre-stress of up to ~50 MPa can result in an increase of magnetostriction by ~90%. This is hypothesized to be due to a "jump" in initial alignment of domains perpendicular to applied stress and improved final alignment parallel to applied stress. | 3 | Magnetic Ordering |
The stability of metals is a longstanding question of solid state physics, which can only be understood in the quantum mechanical framework by properly taking into account the interaction between the positively charged ions and the valence and conduction electrons. It is nevertheless possible to use a very simplified picture of metallic bonding and only keeps an isotropic type of interactions, leading to structures which can be represented as densely packed spheres. And indeed the crystalline simple metal structures are often either close packed face-centered cubic (fcc) or hexagonal close packing (hcp) lattices. Up to some extent amorphous metals and quasicrystals can also be modeled by close packing of spheres. The local atomic order is well modeled by a close packing of tetrahedra, leading to an imperfect icosahedral order.
A regular tetrahedron is the densest configuration for the packing of four equal spheres. The dense random packing of hard spheres problem can thus be mapped on the tetrahedral packing problem. It is a practical exercise to try to pack table tennis balls in order to form only tetrahedral configurations. One starts with four balls arranged as a perfect tetrahedron, and try to add new spheres, while forming new tetrahedra. The next solution, with five balls, is trivially two tetrahedra sharing a common face; note that already with this solution, the fcc structure, which contains individual tetrahedral holes, does not show such a configuration (the tetrahedra share edges, not faces). With six balls, three regular tetrahedra are built, and the cluster is incompatible with all compact crystalline structures (fcc and hcp). Adding a seventh sphere gives a new cluster consisting in two "axial" balls touching each other and five others touching the latter two balls, the outer shape being an almost regular pentagonal bi-pyramid. However, we are facing now a real packing problem, analogous to the one encountered above with the pentagonal tiling in two dimensions. The dihedral angle of a tetrahedron is not commensurable with 2; consequently, a hole remains between two faces of neighboring tetrahedra. As a consequence, a perfect tiling of the Euclidean space R is impossible with regular tetrahedra. The frustration has a topological character: it is impossible to fill Euclidean space with tetrahedra, even severely distorted, if we impose that a constant number of tetrahedra (here five) share a common edge.
The next step is crucial: the search for an unfrustrated structure by allowing for curvature in the space, in order for the local configurations to propagate identically and without defects throughout the whole space. | 3 | Magnetic Ordering |
Moving parts within machines, such as the components of a gear train, normally have a small gap between them, to allow movement and lubrication. As a consequence of this gap, any reversal in direction of a drive part will not be passed on immediately to the driven part. This unwanted delay is normally kept as small as practicable, and is usually called backlash. The amount of backlash will increase with time as the surfaces of moving parts wear. | 3 | Magnetic Ordering |
Freezing is a phase transition where a liquid turns into a solid when its temperature is lowered below its freezing point. In accordance with the internationally established definition, freezing means the solidification phase change of a liquid or the liquid content of a substance, usually due to cooling.
For most substances, the melting and freezing points are the same temperature; however, certain substances possess differing solid-liquid transition temperatures. For example, agar displays a hysteresis in its melting point and freezing point. It melts at 85 °C (185 °F) and solidifies from 32 °C to 40 °C (89.6 °F to 104 °F). | 0 | Cryobiology |
All skimmers have key features in common: water flows through a chamber and is brought into contact with a column of fine bubbles. The bubbles collect proteins and other substances and carry them to the top of the device where the foam, but not the water, collects in a cup. Here the foam condenses to a liquid, which can be easily removed from the system. The material that collects in the cup can range from pale greenish-yellow, watery liquid to a thick black tar.
Consider this summary of optimal protein skimmer design by Randy Holmes-Farley:
Also under considerable recent attention has been the general shape of a skimmer as well. In particular, much attention has been given to the introduction of cone shaped skimmer units. Originally designed by Klaus Jensen in 2004, the concept was founded on the principle that a conical body allows the foam to accumulate more steadily through a gently sloping transition. It was claimed that this reduces the overall turbulence, resulting in more efficient skimming. However, this design reduces the overall volume inside the skimmer, reducing dwell time. Cylindrical-shaped protein skimmers are the most popular design and allow for the largest volume of air and water.
Overall, protein skimmers can be classed in two ways depending on whether they operate by co-current flow or counter-current flow. In a co-current flow system, air is introduced at the bottom of the chamber and is in contact with the water as it rises upwards towards the collection chamber. In a counter-current system, air is forced into the system under pressure and moves against the flow of the water for a while before it rises up towards the collection cup. Because the air bubbles may be in contact with the water for a longer period in a counter-current flow system, protein skimmers of this type are considered by some to be more effective at removing organic wastes. | 1 | Separation Processes |
Because of its ability to cause chemical reactions and excite fluorescence in materials, ultraviolet radiation has a number of applications. The following table gives some uses of specific wavelength bands in the UV spectrum.
* 13.5 nm: Extreme ultraviolet lithography
* 30–200 nm: Photoionization, ultraviolet photoelectron spectroscopy, standard integrated circuit manufacture by photolithography
* 230–365 nm: UV-ID, label tracking, barcodes
* 230–400 nm: Optical sensors, various instrumentation
* 240–280 nm: Disinfection, decontamination of surfaces and water (DNA absorption has a peak at 260 nm), germicidal lamps
* 200–400 nm: Forensic analysis, drug detection
* 270–360 nm: Protein analysis, DNA sequencing, drug discovery
* 280–400 nm: Medical imaging of cells
* 300–320 nm: Light therapy in medicine
* 300–365 nm: Curing of polymers and printer inks
* 350–370 nm: Bug zappers (flies are most attracted to light at 365 nm) | 4 | Ultraviolet Radiation |
The magnetic space groups can be placed into three categories. First, the 230 colorless groups contain only spatial symmetry, and correspond to the crystallographic space groups. Then there are 230 grey groups, which are invariant under antisymmetry. Finally are the 1191 black-white groups, which contain the more complex symmetries. There are two common conventions for giving names to the magnetic space groups. They are Opechowski-Guiccione and Belov-Neronova-Smirnova. For colorless and grey groups, the conventions use the same names, but they treat the black-white groups differently. A full list of the magnetic space groups (in both conventions) can be found both in the original papers, and in several places online.
The types can be distinguished by their different construction. Type I magnetic space groups, are identical to the ordinary space groups,.
Type II magnetic space groups, , are made up of all the symmetry operations of the crystallographic space group, , plus the product of those operations with time reversal operation, . Equivalently, this can be seen as the direct product of an ordinary space group with the point group .
Type III magnetic space groups, , are constructed using a group , which is a subgroup of with index 2.
Type IV magnetic space groups, , are constructed with the use of a pure translation, , which is Seitz notation for null rotation and a translation, . Here the is a vector (usually given in fractional coordinates) pointing from a black colored point to a white colored point, or vice versa. | 3 | Magnetic Ordering |
In a ferromagnet, the magnitude of the magnetization at each spacetime point is approximated by the saturation magnetization (although it can be smaller when averaged over a chunk of volume). The Landau-Lifshitz equation, a precursor of the LLG equation, phenomenologically describes the rotation of the magnetization in response to the effective field which accounts for not only a real magnetic field but also internal magnetic interactions such as exchange and anisotropy. An earlier, but equivalent, equation (the Landau–Lifshitz equation) was introduced by :
where is the electron gyromagnetic ratio and is a phenomenological damping parameter, often replaced by
where is a dimensionless constant called the damping factor. The effective field is a combination of the external magnetic field, the demagnetizing field, and various internal magnetic interactions involving quantum mechanical effects, which is typically defined as the functional derivative of the magnetic free energy with respect to the local magnetization . To solve this equation, additional conditions for the demagnetizing field must be included to accommodate the geometry of the material. | 3 | Magnetic Ordering |
In sedimentology, winnowing is the natural removal of fine material from a coarser sediment by wind or flowing water. Once a sediment has been deposited, subsequent changes in the speed or direction of wind or water flowing over it can agitate the grains in the sediment and allow the preferential removal of the finer grains. This action can improve the sorting and increase the mean grain size of a sediment after it has been deposited.
The term winnowing is from the analogous process for the agricultural separation of wheat from chaff. | 1 | Separation Processes |
An excimer lamp (or excilamp) is a source of ultraviolet light based on spontaneous emission of excimer (exciplex) molecules. | 4 | Ultraviolet Radiation |
The aldehyde or ketone group of a straight-chain monosaccharide will react reversibly with a hydroxyl group on a different carbon atom to form a hemiacetal or hemiketal, forming a heterocyclic ring with an oxygen bridge between two carbon atoms. Rings with five and six atoms are called furanose and pyranose forms, respectively, and exist in equilibrium with the straight-chain form.
During the conversion from straight-chain form to the cyclic form, the carbon atom containing the carbonyl oxygen, called the anomeric carbon, becomes a stereogenic center with two possible configurations: The oxygen atom may take a position either above or below the plane of the ring. The resulting possible pair of stereoisomers is called anomers. In the α anomer, the -OH substituent on the anomeric carbon rests on the opposite side (trans) of the ring from the CHOH side branch. The alternative form, in which the CHOH substituent and the anomeric hydroxyl are on the same side (cis) of the plane of the ring, is called the β anomer. | 2 | Carbohydrates |
Most commonly used post treatment, where chlorine is dissolved in water to form and hydrochloric acid hypochlorous acid. The latter act as a disinfectant that is able to eliminate pathogens such as bacteria, viruses and protozoa by penetrating the cell walls. | 1 | Separation Processes |
For small spots of vitiligo, it is possible to use psoralen as drops, applied only on the spots. This method does not have side effects since the amount is very low.
For larger area, the psoralen is taken as a pill, and the amount is high (10 mg); some patients experience nausea and itching after ingesting the psoralen compound. For these patients PUVA bath therapy may be a good option.
Long term use of PUVA therapy with a pill has been associated with higher rates of skin cancer.
The most significant complication of PUVA therapy for psoriasis is squamous cell skin cancer. Two carcinogenic components of the therapy include the nonionizing radiation of UVA light as well as the psoralen intercalation with DNA. Both processes negatively contribute to genome instability. | 4 | Ultraviolet Radiation |
The isothiocyanates formed from glucosinolates are under laboratory research to assess the expression and activation of enzymes that metabolize xenobiotics, such as carcinogens. Observational studies have been conducted to determine if consumption of cruciferous vegetables affects cancer risk in humans, but there is insufficient clinical evidence to indicate that consuming isothiocyanates in cruciferous vegetables is beneficial, according to a 2017 review. | 2 | Carbohydrates |
Dye-sub printing is a digital printing technology using full color artwork that works with polyester and polymer-coated substrates. Also referred to as digital sublimation, the process is commonly used for decorating apparel, signs and banners, as well as novelty items such as cell phone covers, plaques, coffee mugs, and other items with sublimation-friendly surfaces. The process uses the science of sublimation, in which heat and pressure are applied to a solid, turning it into a gas through an endothermic reaction without passing through the liquid phase.
In sublimation printing, unique sublimation dyes are transferred to sheets of “transfer” paper via liquid gel ink through a piezoelectric print head. The ink is deposited on these high-release inkjet papers, which are used for the next step of the sublimation printing process. After the digital design is printed onto sublimation transfer sheets, it is placed on a heat press along with the substrate to be sublimated.
In order to transfer the image from the paper to the substrate, it requires a heat press process that is a combination of time, temperature and pressure. The heat press applies this special combination, which can change depending on the substrate, to “transfer” the sublimation dyes at the molecular level into the substrate. The most common dyes used for sublimation activate at 350 degrees Fahrenheit. However, a range of 380 to 420 degrees Fahrenheit is normally recommended for optimal color.
The result of the sublimation process is a nearly permanent, high resolution, full color print. Because the dyes are infused into the substrate at the molecular level, rather than applied at a topical level (such as with screen printing and direct to garment printing), the prints will not crack, fade or peel from the substrate under normal conditions. | 1 | Separation Processes |
Between 1995 and 2004 in the United States, an average of 1560 cold-related emergency department visits occurred per year and in the years 1999 to 2004, an average of 647 people died per year due to hypothermia. Of deaths reported between 1999 and 2002 in the US, 49% of those affected were 65 years or older and two-thirds were male. Most deaths were not work related (63%) and 23% of affected people were at home. Hypothermia was most common during the autumn and winter months of October through March. In the United Kingdom, an estimated 300 deaths per year are due to hypothermia, whereas the annual incidence of hypothermia-related deaths in Canada is 8000. | 0 | Cryobiology |
In ancient alchemy, a protoscience that contributed to the development of modern chemistry and medicine, alchemists developed a structure of basic laboratory techniques, theory, terminology, and experimental methods. Sublimation was used to refer to the process in which a substance is heated to a vapor, then immediately collects as sediment on the upper portion and neck of the heating medium (typically a retort or alembic), but can also be used to describe other similar non-laboratory transitions. It was mentioned by alchemical authors such as Basil Valentine and George Ripley, and in the Rosarium philosophorum, as a process necessary for the completion of the magnum opus. Here, the word sublimation was used to describe an exchange of "bodies" and "spirits" similar to laboratory phase transition between solids and gases. Valentine, in his Le char triomphal de lantimoine' (Triumphal Chariot of Antimony, published 1646) made a comparison to spagyrics in which a vegetable sublimation can be used to separate the spirits in wine and beer. Ripley used language more indicative of the mystical implications of sublimation, indicating that the process has a double aspect in the spiritualization of the body and the corporalizing of the spirit. He writes:
<blockquote><poem>
And Sublimations we make for three causes,
The first cause is to make the body spiritual.
The second is that the spirit may be corporeal,
And become fixed with it and consubstantial.
The third cause is that from its filthy original.
It may be cleansed, and its saltiness sulphurious
May be diminished in it, which is infectious. | 1 | Separation Processes |
A mathematically analogous situation to the degeneracy in water ice is found in the spin ices. A common spin ice structure is shown in Figure 6 in the cubic pyrochlore structure with one magnetic atom or ion residing on each of the four corners. Due to the strong crystal field in the material, each of the magnetic ions can be represented by an Ising ground state doublet with a large moment. This suggests a picture of Ising spins residing on the corner-sharing tetrahedral lattice with spins fixed along the local quantization axis, the TiO, DyTiO, and HoSnO. These materials all show nonzero residual entropy at low temperature. | 3 | Magnetic Ordering |
The evolution of early reproductive proteins and enzymes is attributed in modern models of evolutionary theory to ultraviolet radiation. UVB causes thymine base pairs next to each other in genetic sequences to bond together into thymine dimers, a disruption in the strand that reproductive enzymes cannot copy. This leads to frameshifting during genetic replication and protein synthesis, usually killing the cell. Before formation of the UV-blocking ozone layer, when early prokaryotes approached the surface of the ocean, they almost invariably died out. The few that survived had developed enzymes that monitored the genetic material and removed thymine dimers by nucleotide excision repair enzymes. Many enzymes and proteins involved in modern mitosis and meiosis are similar to repair enzymes, and are believed to be evolved modifications of the enzymes originally used to overcome DNA damages caused by UV. | 4 | Ultraviolet Radiation |
Naphthalene, an organic compound commonly found in pesticides such as mothballs, sublimes easily because it is made of non-polar molecules that are held together only by van der Waals intermolecular forces. Naphthalene is a solid that sublimes gradually at standard temperature and pressure, at a high rate, with the critical sublimation point at around 80°C or 176°F. At low temperature, its vapour pressure is high enough, 1mmHg at 53°C, to make the solid form of naphthalene evaporate into gas. On cool surfaces, the naphthalene vapours will solidify to form needle-like crystals. | 1 | Separation Processes |
Low-carbohydrate diets may miss the health advantages – such as increased intake of dietary fiber – afforded by high-quality carbohydrates found in legumes and pulses, whole grains, fruits, and vegetables. A "meta-analysis, of moderate quality," included as adverse effects of the diet halitosis, headache and constipation.
Carbohydrate-restricted diets can be as effective as low-fat diets in helping achieve weight loss over the short term when overall calorie intake is reduced. An Endocrine Society scientific statement said that "when calorie intake is held constant [...] body-fat accumulation does not appear to be affected by even very pronounced changes in the amount of fat vs carbohydrate in the diet." In the long term, effective weight loss or maintenance depends on calorie restriction, not the ratio of macronutrients in a diet. The reasoning of diet advocates that carbohydrates cause undue fat accumulation by increasing blood insulin levels, and that low-carbohydrate diets have a "metabolic advantage", is not supported by clinical evidence. Further, it is not clear how low-carbohydrate dieting affects cardiovascular health, although two reviews showed that carbohydrate restriction may improve lipid markers of cardiovascular disease risk.
Carbohydrate-restricted diets are no more effective than a conventional healthy diet in preventing the onset of type 2 diabetes, but for people with type 2 diabetes, they are a viable option for losing weight or helping with glycemic control. There is limited evidence to support routine use of low-carbohydrate dieting in managing type 1 diabetes. The American Diabetes Association recommends that people with diabetes should adopt a generally healthy diet, rather than a diet focused on carbohydrate or other macronutrients.
An extreme form of low-carbohydrate diet – the ketogenic diet – is established as a medical diet for treating epilepsy. Through celebrity endorsement during the early 21st century, it became a fad diet as a means of weight loss, but with risks of undesirable side effects, such as low energy levels and increased hunger, insomnia, nausea, and gastrointestinal discomfort. The British Dietetic Association named it one of the "top 5 worst celeb diets to avoid in 2018". | 2 | Carbohydrates |
The embryo transfer procedure starts by placing a speculum in the vagina to visualize the cervix, which is cleansed with saline solution or culture media. A transfer catheter is loaded with the embryos and handed to the clinician after confirmation of the patient's identity. The catheter is inserted through the cervical canal and advanced into the uterine cavity. Several types of catheters are used for this process, however, there is good evidence that using a soft vs a hard transfer catheter can increase the chances of clinical pregnancy.
There is good and consistent evidence of benefit in ultrasound guidance, that is, making an abdominal ultrasound to ensure correct placement, which is 1–2 cm from the uterine fundus. There is evidence of a significant increase in clinical pregnancy using ultrasound guidance compared with only "clinical touch", as well as performing the transfer with hyaluronic acid enriched transfer media. Anesthesia is generally not required. Single embryo transfers in particular require accuracy and precision in placement within the uterine cavity. The optimal target for embryo placement, known as the maximal implantation potential (MIP) point, is identified using 3D/4D ultrasound. However, there is limited evidence that supports deposition of embryos in the midportion of the uterus.
After insertion of the catheter, the contents are expelled and the embryos are deposited. Limited evidence supports making trial transfers before performing the procedure with embryos. After expulsion, the duration that the catheter remains inside the uterus has no effect on pregnancy rates. Limited evidence suggests avoiding negative pressure from the catheter after expulsion. After withdrawal, the catheter is handed to the embryologist, who inspects it for retained embryos.
In the process of zygote intrafallopian transfer (ZIFT), eggs are removed from the woman, fertilised, and then placed in the woman's fallopian tubes rather than the uterus. | 0 | Cryobiology |
Ultraviolet radiation can aggravate several skin conditions and diseases, including systemic lupus erythematosus, Sjögrens syndrome, Sinear Usher syndrome, rosacea, dermatomyositis, Dariers disease, Kindler–Weary syndrome and Porokeratosis. | 4 | Ultraviolet Radiation |
The principle of Solvent Impregnated Resins was first shown in 1971 by Abraham Warshawsky. This first venture was aimed at the extraction of metals. Ever since then, SIRs have been mainly used for metal extraction, be it heavy metals or specifically radioactive metals. Much research on SIRs has been done by J.L Cortina and e.g. N. Kabay, K. Jerabek or J. Serarols. However, lately investigations also go towards using SIRs for the separation of natural compounds, and even for separation of biotechnological products. | 1 | Separation Processes |
The time of the NP decaying magnetic field for bound particles in SPMR measurements is on the order of seconds. Unbound particles of similar size decay on the order of milliseconds, contributing very little to the results.
The decay curve for bound NP is fit by an equation of the form
or
The constants are fit to the experimental data and a particular time point is used to extract the value of the magnetic field. The fields from all the sensor positions are then used to construct a field contour map. | 3 | Magnetic Ordering |
The use of cold for pain relief and as an anti-inflammatory has been known since the time of Hippocrates (460–377 BC). Since then there have been numerous accounts of ice used for pain relief including from the Ancient Egyptians and Avicenna of Persia (982–1070 AD). In 1812 Napoleon's Surgeon General noted that half-frozen soldiers from the Moscow battle were able to tolerate amputations with reduced pain and in 1851, ice and salt mixtures were promoted by Arnott for the treatment of nerve pain. Campbell White, in 1899, was the first to use refrigerants medically, and Allington, in 1950, was the first to use liquid nitrogen for medical treatments. In 1961, Cooper et al. created an early cryoprobe that reached −190 °C using liquid nitrogen. Shortly thereafter, in 1967, an ophthalmic surgeon named Amoils used carbon dioxide and nitrous oxide to create a cryoprobe that reached −70 °C. | 0 | Cryobiology |
In some countries where lactulose may be obtained without a prescription, lactulose is commonly used as a food additive to improve taste and promote intestinal transit. | 2 | Carbohydrates |
Dye sensitised solar cells operate as a photoanode (n-DSC), where photocurrent result from electron injection by the sensitized dye. Photocathodes (p-DSCs) operate in an inverse mode compared to the conventional n-DSC, where dye-excitation is followed by rapid electron transfer from a p-type semiconductor to the dye (dye-sensitized hole injection, instead of electron injection). Such p-DSCs and n-DSCs can be combined to construct tandem solar cells (pn-DSCs) and the theoretical efficiency of tandem DSCs is well beyond that of single-junction DSCs.
A standard tandem cell consists of one n-DSC and one p-DSC in a simple sandwich configuration with an intermediate electrolyte layer. n-DSC and p-DSC are connected in series, which implies that the resulting photocurrent will be controlled by the weakest photoelectrode, whereas photovoltages are additive. Thus, photocurrent matching is very important for the construction of highly efficient tandem pn-DSCs. However, unlike n-DSCs, fast charge recombination following dye-sensitized hole injection usually resulted in low photocurrents in p-DSC and thus hampered the efficiency of the overall device.
Researchers have found that using dyes comprising a perylenemonoimide (PMI) as the acceptor and an oligothiophene coupled to triphenylamine as the donor greatly improve the performance of p-DSC by reducing charge recombination rate following dye-sensitized hole injection. The researchers constructed a tandem DSC device with NiO on the p-DSC side and TiO on the n-DSC side. Photocurrent matching was achieved through adjustment of NiO and TiO film thicknesses to control the optical absorptions and therefore match the photocurrents of both electrodes. The energy conversion efficiency of the device is 1.91%, which exceeds the efficiency of its individual components, but is still much lower than that of high performance n-DSC devices (6%–11%). The results are still promising since the tandem DSC was in itself rudimentary. The dramatic improvement in performance in p-DSC can eventually lead to tandem devices with much greater efficiency than lone n-DSCs.
As previously mentioned, using a solid-state electrolyte has several advantages over a liquid system (such as no leakage and faster charge transport), which has also been realised for dye-sensitised photocathodes. Using electron transporting materials such as PCBM, TiO and ZnO instead of the conventional liquid redox couple electrolyte, researchers have managed to fabricate solid state p-DSCs (p-ssDSCs), aiming for solid state tandem dye sensitized solar cells, which have the potential to achieve much greater photovoltages than a liquid tandem device. | 4 | Ultraviolet Radiation |
Although the catalytic mechanisms used by glycogen synthase are not well known, structural similarities to glycogen phosphorylase at the catalytic and substrate binding site suggest that the mechanism for synthesis is similar in glycogen synthase and glycogen phosphorylase. | 2 | Carbohydrates |
Tanning lamps, also known as tanning bulbs or tanning tubes, produce the ultraviolet light in tanning devices. The performance (or output) varies widely between brands and styles. Most are low-pressure fluorescent tubes, but high-pressure bulbs also exist. The electronics systems and number of lamps affect performance, but to a lesser degree than the lamp itself. Tanning lamps are regulated separately from tanning beds in most countries, as they are the consumable portion of the system. | 4 | Ultraviolet Radiation |
A settling chamber where the two phases separate by static decantation. Coalescence plates facilitate the separation of the emulsion into two phases (heavy and light). The two phases then pass to continuous stages by overflowing the light phase and heavy phase weirs. The height of the heavy phase weir can be adjusted in order to position the heavy/light interphase in the settling chamber based on the density of each one of the phases.
The settler is a calm pool downstream of the mixer where the liquids are allowed to separate by gravity. The liquids are then removed separately from the end of the mixer. | 1 | Separation Processes |
Studies have indicated that IVF mothers show greater emotional involvement with their child, and they enjoy motherhood more than mothers by natural conception. Similarly, studies have indicated that IVF fathers express more warmth and emotional involvement than fathers by adoption and natural conception and enjoy fatherhood more. Some IVF parents become overly involved with their children. | 0 | Cryobiology |
* Cryobiology, the branch of biology that studies the effects of low temperatures on living things
* Cryonics, the low-temperature preservation of people who cannot be sustained by contemporary medicine
* Cryoprecipitate, a blood-derived protein product used to treat some bleeding disorders
* Cryotherapy, medical treatment using cold
** Cryoablation, tissue removal using cold
** Cryosurgery, surgery using cold
* Cryo-electron microscopy (cryoEM), a technique that fires beams of electrons at proteins that have been frozen in solution, to deduce the biomolecules’ structure | 0 | Cryobiology |
A major step was the work of Heinrich Heesch, who first rigorously established the concept of antisymmetry as part of a series of papers in 1929 and 1930. Applying this antisymmetry operation to the 32 crystallographic point groups gives a total of 122 magnetic point groups. However, although Heesch correctly laid out each of the magnetic point groups, his work remained obscure, and the point groups were later re-derived by Tavger and Zaitsev. The concept was more fully explored by Shubnikov in terms of color symmetry. When applied to space groups, the number increases from the usual 230 three dimensional space groups to 1651 magnetic space groups, as found in the 1953 thesis of Alexandr Zamorzaev. While the magnetic space groups were originally found using geometry, it was later shown the same magnetic space groups can be found using generating sets. | 3 | Magnetic Ordering |
An important application of the Néel effect is as a current sensor, measuring the magnetic field radiated by a conductor with a current; this is the principle of Néel effect current sensors. The Néel effect allows the accurate measurement of currents with very low-frequency-type sensors in a current transformer without contact.
The transducer of a Néel-effect current sensor consists of a coil with a core of superparamagnetic nanoparticles. The coil is traversed by a current excitation:
In the presence of an external magnetic field to be measured:
the transducer transposes (with the Néel effect) the information to be measured, H (f) around a carrier frequency, the harmonic of order 2 excitation current 2:
which is simpler. The electromotive force generated by the coil is proportional to the magnetic field to measure:
and to the square of the excitation current:
To improve the measurement's performance (such as linearity and sensitivity to temperature and vibration), the sensor includes a second permanent winding-reaction against it to cancel the second harmonic. The relationship of the current reaction against the primary current is proportional to the number of turns against reaction: | 3 | Magnetic Ordering |
Glycan arrays, like that offered by the Consortium for Functional Glycomics (CFG), National Center for Functional Glycomics (NCFG) and [http://www.zbiotech.com/ Z Biotech, LLC], contain carbohydrate compounds that can be screened with lectins, antibodies or cell receptors to define carbohydrate specificity and identify ligands. Glycan array screening works in much the same way as other microarray that is used for instance to study gene expression DNA microarrays or protein interaction Protein microarrays.
Glycan arrays are composed of various oligosaccharides and/or polysaccharides immobilised on a solid support in a spatially-defined arrangement. This technology provides the means of studying glycan-protein interactions in a high-throughput environment. These natural or synthetic (see carbohydrate synthesis) glycans are then incubated with any glycan-binding protein such as lectins, cell surface receptors or possibly a whole organism such as a virus. Binding is quantified using fluorescence-based detection methods. Certain types of glycan microarrays can even be re-used for multiple samples using a method called Microwave Assisted Wet-Erase. | 2 | Carbohydrates |
In some cases, laboratory mix-ups (misidentified gametes, transfer of wrong embryos) have occurred, leading to legal action against the IVF provider and complex paternity suits. An example is the case of a woman in California who received the embryo of another couple and was notified of this mistake after the birth of her son. This has led to many authorities and individual clinics implementing procedures to minimise the risk of such mix-ups. The HFEA, for example, requires clinics to use a double witnessing system, the identity of specimens is checked by two people at each point at which specimens are transferred. Alternatively, technological solutions are gaining favour, to reduce the manpower cost of manual double witnessing, and to further reduce risks with uniquely numbered RFID tags which can be identified by readers connected to a computer. The computer tracks specimens throughout the process and alerts the embryologist if non-matching specimens are identified. Although the use of RFID tracking has expanded in the US, it is still not widely adopted. | 0 | Cryobiology |
A magnetic particle with cubic anisotropy has three or four easy axes, depending on the anisotropy parameters. The energy has the form
If the easy axes are the and axes. If there are four easy axes characterized by . | 3 | Magnetic Ordering |
Hand-counting is a cheap and easy to conduct method to estimate the liberation characteristics of a bulk sample wither originating from run-of-mine material, a waste dump or for example exploration trenching. Analysis of particles in the size range 10-100mm has been conducted on a total sample mass of 10 tonnes. By visual inspection of trained personnel, a classification of each particle into different bins (e.g. lithology, grade) is possible and the distribution is determined by weighing each bin. A trained professional can quickly estimate the efficiency of a specific detection and process efficiency of sensor-based ore sorting knowing the sensor response of the mineralogy of ore in question and other process efficiency parameters. | 1 | Separation Processes |
The Cells Alive System (CAS) is a line of commercial freezers manufactured by ABI Corporation, Ltd. of Chiba, Japan claimed to preserve food with greater freshness than ordinary freezing by using electromagnetic fields and mechanical vibrations to limit ice crystal formation that destroys food texture. They also are claimed to increase tissue survival without having its water replaced by cryogenically compatible fluids; whether they have any effect is unclear. The freezers have attracted attention among organ banking and transplantation surgeons, as well as the food processing industry. | 0 | Cryobiology |
According to the Bohr–van Leeuwen theorem, when statistical mechanics and classical mechanics are applied consistently, the thermal average of the magnetization is always zero. Magnetism cannot be explained without quantum mechanics. That means that it can not be explained without taking into account that matter consists of atoms. Next are listed some semi-classical approaches to it, using a simple atom model, as they are easy to understand and relate to even though they are not perfectly correct.
The magnetic moment of a free atom is due to the orbital angular momentum and spin of its electrons and nucleus. When the atoms are such that their shells are completely filled, they do not have any net magnetic dipole moment in the absence of an external magnetic field. When present, such a field distorts the trajectories (classical concept) of the electrons so that the applied field could be opposed as predicted by the Lenz's law. In other words, the net magnetic dipole induced by the external field is in the opposite direction, and such materials are repelled by it. These are called diamagnetic materials.
Sometimes an atom has a net magnetic dipole moment even in the absence of an external magnetic field. The contributions of the individual electrons and nucleus to the total angular momentum do not cancel each other. This happens when the shells of the atoms are not fully filled up (Hund's Rule). A collection of such atoms however, may not have any net magnetic moment as these dipoles are not aligned. An external magnetic field may serve to align them to some extent and develop a net magnetic moment per volume. Such alignment is temperature dependent as thermal agitation acts to disorient the dipoles. Such materials are called paramagnetic.
In some materials, the atoms (with net magnetic dipole moments) can interact with each other to align themselves even in the absence of any external magnetic field when the thermal agitation is low enough. Alignment could be parallel (ferromagnetism) or anti-parallel. In the case of anti-parallel, the dipole moments may or may not cancel each other (antiferromagnetism, ferrimagnetism). | 3 | Magnetic Ordering |
When no external field is applied, the antiferromagnetic structure corresponds to a vanishing total magnetization. In an external magnetic field, a kind of ferrimagnetic behavior may be displayed in the antiferromagnetic phase, with the absolute value of one of the sublattice magnetizations differing from that of the other sublattice, resulting in a nonzero net magnetization. Although the net magnetization should be zero at a temperature of absolute zero, the effect of spin canting often causes a small net magnetization to develop, as seen for example in hematite.
The magnetic susceptibility of an antiferromagnetic material typically shows a maximum at the Néel temperature. In contrast, at the transition between the ferromagnetic to the paramagnetic phases the susceptibility will diverge. In the antiferromagnetic case, a divergence is observed in the staggered susceptibility.
Various microscopic (exchange) interactions between the magnetic moments or spins may lead to antiferromagnetic structures. In the simplest case, one may consider an Ising model on a bipartite lattice, e.g. the simple cubic lattice, with couplings between spins at nearest neighbor sites. Depending on the sign of that interaction, ferromagnetic or antiferromagnetic order will result. Geometrical frustration or competing ferro- and antiferromagnetic interactions may lead to different and, perhaps, more complicated magnetic structures.
The relationship between magnetization and the magnetizing field is non-linear like in ferromagnetic materials. This fact is due to the contribution of the hysteresis loop, which for ferromagnetic materials involves a residual magnetization. | 3 | Magnetic Ordering |
End of preview. Expand
in Dataset Viewer.
Wikipedia Cryobiology to Separation Processes Classification
This dataset is derived from the English Wikipedia articles and is designed for multi-class text classification tasks. The dataset covers a range of topics within the fields of chemistry and biology, divided into five distinct classes based on thematic content:
Cryobiology: This class includes articles that focus on cryobiology, the study of the effects of low temperatures on living organisms and biological systems. Topics may cover cryopreservation, cryosurgery, and the mechanisms of cold adaptation in organisms.
Magnetic Ordering: This class comprises articles related to magnetic ordering, which involves the arrangement of magnetic moments in materials. Topics may include ferromagnetism, antiferromagnetism, and other types of magnetic ordering, as well as their applications in technology.
Carbohydrates: This class includes articles that focus on carbohydrates, which are organic compounds consisting of carbon, hydrogen, and oxygen. Topics may cover the structure, function, and metabolism of carbohydrates, as well as their roles in biology and nutrition.
Ultraviolet Radiation: This class comprises articles related to ultraviolet (UV) radiation, a type of electromagnetic radiation. Topics may include the sources, effects, and applications of UV radiation, as well as its impact on health and the environment.
Separation Processes: This class includes articles that focus on separation processes, which are techniques used to separate mixtures into their individual components. Topics may cover methods such as distillation, filtration, chromatography, and membrane processes.
- Downloads last month
- 57
Size of downloaded dataset files:
756 kB
Size of the auto-converted Parquet files:
756 kB
Number of rows:
1,164