Spaces:
No application file
A newer version of the Streamlit SDK is available:
1.37.1
ALBERT
*************** Changes from Original Implementation ***************
- Remove sentence order in
run_pretraining.py
- Modify
_is_start_piece_sp
function increate_pretraining_data.py
to account for non-English languages.
***************New March 28, 2020 ***************
Add a colab tutorial to run fine-tuning for GLUE datasets.
***************New January 7, 2020 ***************
v2 TF-Hub models should be working now with TF 1.15, as we removed the native Einsum op from the graph. See updated TF-Hub links below.
***************New December 30, 2019 ***************
Chinese models are released. We would like to thank CLUE team for providing the training data.
Version 2 of ALBERT models is released.
- Base: [Tar file] [TF-Hub]
- Large: [Tar file] [TF-Hub]
- Xlarge: [Tar file] [TF-Hub]
- Xxlarge: [Tar file] [TF-Hub]
In this version, we apply 'no dropout', 'additional training data' and 'long training time' strategies to all models. We train ALBERT-base for 10M steps and other models for 3M steps.
The result comparison to the v1 models is as followings:
Average | SQuAD1.1 | SQuAD2.0 | MNLI | SST-2 | RACE | |
---|---|---|---|---|---|---|
V2 | ||||||
ALBERT-base | 82.3 | 90.2/83.2 | 82.1/79.3 | 84.6 | 92.9 | 66.8 |
ALBERT-large | 85.7 | 91.8/85.2 | 84.9/81.8 | 86.5 | 94.9 | 75.2 |
ALBERT-xlarge | 87.9 | 92.9/86.4 | 87.9/84.1 | 87.9 | 95.4 | 80.7 |
ALBERT-xxlarge | 90.9 | 94.6/89.1 | 89.8/86.9 | 90.6 | 96.8 | 86.8 |
V1 | ||||||
ALBERT-base | 80.1 | 89.3/82.3 | 80.0/77.1 | 81.6 | 90.3 | 64.0 |
ALBERT-large | 82.4 | 90.6/83.9 | 82.3/79.4 | 83.5 | 91.7 | 68.5 |
ALBERT-xlarge | 85.5 | 92.5/86.1 | 86.1/83.1 | 86.4 | 92.4 | 74.8 |
ALBERT-xxlarge | 91.0 | 94.8/89.3 | 90.2/87.4 | 90.8 | 96.9 | 86.5 |
The comparison shows that for ALBERT-base, ALBERT-large, and ALBERT-xlarge, v2 is much better than v1, indicating the importance of applying the above three strategies. On average, ALBERT-xxlarge is slightly worse than the v1, because of the following two reasons: 1) Training additional 1.5 M steps (the only difference between these two models is training for 1.5M steps and 3M steps) did not lead to significant performance improvement. 2) For v1, we did a little bit hyperparameter search among the parameters sets given by BERT, Roberta, and XLnet. For v2, we simply adopt the parameters from v1 except for RACE, where we use a learning rate of 1e-5 and 0 ALBERT DR (dropout rate for ALBERT in finetuning). The original (v1) RACE hyperparameter will cause model divergence for v2 models. Given that the downstream tasks are sensitive to the fine-tuning hyperparameters, we should be careful about so called slight improvements.
ALBERT is "A Lite" version of BERT, a popular unsupervised language representation learning algorithm. ALBERT uses parameter-reduction techniques that allow for large-scale configurations, overcome previous memory limitations, and achieve better behavior with respect to model degradation.
For a technical description of the algorithm, see our paper:
ALBERT: A Lite BERT for Self-supervised Learning of Language Representations
Zhenzhong Lan, Mingda Chen, Sebastian Goodman, Kevin Gimpel, Piyush Sharma, Radu Soricut
Release Notes
- Initial release: 10/9/2019
Results
Performance of ALBERT on GLUE benchmark results using a single-model setup on dev:
Models | MNLI | QNLI | QQP | RTE | SST | MRPC | CoLA | STS |
---|---|---|---|---|---|---|---|---|
BERT-large | 86.6 | 92.3 | 91.3 | 70.4 | 93.2 | 88.0 | 60.6 | 90.0 |
XLNet-large | 89.8 | 93.9 | 91.8 | 83.8 | 95.6 | 89.2 | 63.6 | 91.8 |
RoBERTa-large | 90.2 | 94.7 | 92.2 | 86.6 | 96.4 | 90.9 | 68.0 | 92.4 |
ALBERT (1M) | 90.4 | 95.2 | 92.0 | 88.1 | 96.8 | 90.2 | 68.7 | 92.7 |
ALBERT (1.5M) | 90.8 | 95.3 | 92.2 | 89.2 | 96.9 | 90.9 | 71.4 | 93.0 |
Performance of ALBERT-xxl on SQuaD and RACE benchmarks using a single-model setup:
Models | SQuAD1.1 dev | SQuAD2.0 dev | SQuAD2.0 test | RACE test (Middle/High) |
---|---|---|---|---|
BERT-large | 90.9/84.1 | 81.8/79.0 | 89.1/86.3 | 72.0 (76.6/70.1) |
XLNet | 94.5/89.0 | 88.8/86.1 | 89.1/86.3 | 81.8 (85.5/80.2) |
RoBERTa | 94.6/88.9 | 89.4/86.5 | 89.8/86.8 | 83.2 (86.5/81.3) |
UPM | - | - | 89.9/87.2 | - |
XLNet + SG-Net Verifier++ | - | - | 90.1/87.2 | - |
ALBERT (1M) | 94.8/89.2 | 89.9/87.2 | - | 86.0 (88.2/85.1) |
ALBERT (1.5M) | 94.8/89.3 | 90.2/87.4 | 90.9/88.1 | 86.5 (89.0/85.5) |
Pre-trained Models
TF-Hub modules are available:
- Base: [Tar file] [TF-Hub]
- Large: [Tar file] [TF-Hub]
- Xlarge: [Tar file] [TF-Hub]
- Xxlarge: [Tar file] [TF-Hub]
Example usage of the TF-Hub module in code:
tags = set()
if is_training:
tags.add("train")
albert_module = hub.Module("https://tfhub.dev/google/albert_base/1", tags=tags,
trainable=True)
albert_inputs = dict(
input_ids=input_ids,
input_mask=input_mask,
segment_ids=segment_ids)
albert_outputs = albert_module(
inputs=albert_inputs,
signature="tokens",
as_dict=True)
# If you want to use the token-level output, use
# albert_outputs["sequence_output"] instead.
output_layer = albert_outputs["pooled_output"]
Most of the fine-tuning scripts in this repository support TF-hub modules
via the --albert_hub_module_handle
flag.
Pre-training Instructions
To pretrain ALBERT, use run_pretraining.py
:
pip install -r albert/requirements.txt
python -m albert.run_pretraining \
--input_file=... \
--output_dir=... \
--init_checkpoint=... \
--albert_config_file=... \
--do_train \
--do_eval \
--train_batch_size=4096 \
--eval_batch_size=64 \
--max_seq_length=512 \
--max_predictions_per_seq=20 \
--optimizer='lamb' \
--learning_rate=.00176 \
--num_train_steps=125000 \
--num_warmup_steps=3125 \
--save_checkpoints_steps=5000
Fine-tuning on GLUE
To fine-tune and evaluate a pretrained ALBERT on GLUE, please see the
convenience script run_glue.sh
.
Lower-level use cases may want to use the run_classifier.py
script directly.
The run_classifier.py
script is used both for fine-tuning and evaluation of
ALBERT on individual GLUE benchmark tasks, such as MNLI:
pip install -r albert/requirements.txt
python -m albert.run_classifier \
--data_dir=... \
--output_dir=... \
--init_checkpoint=... \
--albert_config_file=... \
--spm_model_file=... \
--do_train \
--do_eval \
--do_predict \
--do_lower_case \
--max_seq_length=128 \
--optimizer=adamw \
--task_name=MNLI \
--warmup_step=1000 \
--learning_rate=3e-5 \
--train_step=10000 \
--save_checkpoints_steps=100 \
--train_batch_size=128
Good default flag values for each GLUE task can be found in run_glue.sh
.
You can fine-tune the model starting from TF-Hub modules instead of raw
checkpoints by setting e.g.
--albert_hub_module_handle=https://tfhub.dev/google/albert_base/1
instead
of --init_checkpoint
.
You can find the spm_model_file in the tar files or under the assets folder of the tf-hub module. The name of the model file is "30k-clean.model".
After evaluation, the script should report some output like this:
***** Eval results *****
global_step = ...
loss = ...
masked_lm_accuracy = ...
masked_lm_loss = ...
sentence_order_accuracy = ...
sentence_order_loss = ...
Fine-tuning on SQuAD
To fine-tune and evaluate a pretrained model on SQuAD v1, use the
run_squad_v1.py
script:
pip install -r albert/requirements.txt
python -m albert.run_squad_v1 \
--albert_config_file=... \
--output_dir=... \
--train_file=... \
--predict_file=... \
--train_feature_file=... \
--predict_feature_file=... \
--predict_feature_left_file=... \
--init_checkpoint=... \
--spm_model_file=... \
--do_lower_case \
--max_seq_length=384 \
--doc_stride=128 \
--max_query_length=64 \
--do_train=true \
--do_predict=true \
--train_batch_size=48 \
--predict_batch_size=8 \
--learning_rate=5e-5 \
--num_train_epochs=2.0 \
--warmup_proportion=.1 \
--save_checkpoints_steps=5000 \
--n_best_size=20 \
--max_answer_length=30
You can fine-tune the model starting from TF-Hub modules instead of raw
checkpoints by setting e.g.
--albert_hub_module_handle=https://tfhub.dev/google/albert_base/1
instead
of --init_checkpoint
.
For SQuAD v2, use the run_squad_v2.py
script:
pip install -r albert/requirements.txt
python -m albert.run_squad_v2 \
--albert_config_file=... \
--output_dir=... \
--train_file=... \
--predict_file=... \
--train_feature_file=... \
--predict_feature_file=... \
--predict_feature_left_file=... \
--init_checkpoint=... \
--spm_model_file=... \
--do_lower_case \
--max_seq_length=384 \
--doc_stride=128 \
--max_query_length=64 \
--do_train \
--do_predict \
--train_batch_size=48 \
--predict_batch_size=8 \
--learning_rate=5e-5 \
--num_train_epochs=2.0 \
--warmup_proportion=.1 \
--save_checkpoints_steps=5000 \
--n_best_size=20 \
--max_answer_length=30
You can fine-tune the model starting from TF-Hub modules instead of raw
checkpoints by setting e.g.
--albert_hub_module_handle=https://tfhub.dev/google/albert_base/1
instead
of --init_checkpoint
.
Fine-tuning on RACE
For RACE, use the run_race.py
script:
pip install -r albert/requirements.txt
python -m albert.run_race \
--albert_config_file=... \
--output_dir=... \
--train_file=... \
--eval_file=... \
--data_dir=...\
--init_checkpoint=... \
--spm_model_file=... \
--max_seq_length=512 \
--max_qa_length=128 \
--do_train \
--do_eval \
--train_batch_size=32 \
--eval_batch_size=8 \
--learning_rate=1e-5 \
--train_step=12000 \
--warmup_step=1000 \
--save_checkpoints_steps=100
You can fine-tune the model starting from TF-Hub modules instead of raw
checkpoints by setting e.g.
--albert_hub_module_handle=https://tfhub.dev/google/albert_base/1
instead
of --init_checkpoint
.
SentencePiece
Command for generating the sentence piece vocabulary:
spm_train \
--input all.txt --model_prefix=30k-clean --vocab_size=30000 --logtostderr
--pad_id=0 --unk_id=1 --eos_id=-1 --bos_id=-1
--control_symbols=[CLS],[SEP],[MASK]
--user_defined_symbols="(,),\",-,.,–,£,€"
--shuffle_input_sentence=true --input_sentence_size=10000000
--character_coverage=0.99995 --model_type=unigram