File size: 78,073 Bytes
11c7c97 |
1 2 3 4 5 6 |
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE collection SYSTEM "BioC.dtd">
<collection><source>PMC</source><date>20201215</date><key>pmc.key</key><document><id>4880283</id><infon key="license">CC BY</infon><passage><infon key="alt-title">Crystal Structures of Putative Sugar Kinases</infon><infon key="article-id_doi">10.1371/journal.pone.0156067</infon><infon key="article-id_pmc">4880283</infon><infon key="article-id_pmid">27223615</infon><infon key="article-id_publisher-id">PONE-D-16-05184</infon><infon key="elocation-id">e0156067</infon><infon key="issue">5</infon><infon key="license">This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.</infon><infon key="name_0">surname:Xie;given-names:Yuan</infon><infon key="name_1">surname:Li;given-names:Mei</infon><infon key="name_2">surname:Chang;given-names:Wenrui</infon><infon key="name_3">surname:Zeth;given-names:Kornelius</infon><infon key="name_4">surname:Chang;given-names:Wenrui</infon><infon key="name_5">surname:Li;given-names:Mei</infon><infon key="name_6">surname:Chang;given-names:Wenrui</infon><infon key="name_7">surname:Li;given-names:Mei</infon><infon key="notes">All structural files are available from the Protein Data Bank (accession numbers 5HTN, 5HTP, 5HUX, 5HV7, 5HTJ, 5HU2, 5HTY, 5HTR, 5HTV and 5HTX).</infon><infon key="section_type">TITLE</infon><infon key="title">Data Availability</infon><infon key="type">front</infon><infon key="volume">11</infon><infon key="year">2016</infon><offset>0</offset><text>Crystal Structures of Putative Sugar Kinases from Synechococcus Elongatus PCC 7942 and Arabidopsis Thaliana</text></passage><passage><infon key="section_type">ABSTRACT</infon><infon key="type">abstract</infon><offset>108</offset><text>The genome of the Synechococcus elongatus strain PCC 7942 encodes a putative sugar kinase (SePSK), which shares 44.9% sequence identity with the xylulose kinase-1 (AtXK-1) from Arabidopsis thaliana. Sequence alignment suggests that both kinases belong to the ribulokinase-like carbohydrate kinases, a sub-family of FGGY family carbohydrate kinases. However, their exact physiological function and real substrates remain unknown. Here we solved the structures of SePSK and AtXK-1 in both their apo forms and in complex with nucleotide substrates. The two kinases exhibit nearly identical overall architecture, with both kinases possessing ATP hydrolysis activity in the absence of substrates. In addition, our enzymatic assays suggested that SePSK has the capability to phosphorylate D-ribulose. In order to understand the catalytic mechanism of SePSK, we solved the structure of SePSK in complex with D-ribulose and found two potential substrate binding pockets in SePSK. Using mutation and activity analysis, we further verified the key residues important for its catalytic activity. Moreover, our structural comparison with other family members suggests that there are major conformational changes in SePSK upon substrate binding, facilitating the catalytic process. Together, these results provide important information for a more detailed understanding of the cofactor and substrate binding mode as well as the catalytic mechanism of SePSK, and possible similarities with its plant homologue AtXK-1.</text></passage><passage><infon key="section_type">INTRO</infon><infon key="type">title_1</infon><offset>1612</offset><text>Introduction</text></passage><passage><infon key="section_type">INTRO</infon><infon key="type">paragraph</infon><offset>1625</offset><text>Carbohydrates are essential cellular compounds involved in the metabolic processes present in all organisms. Phosphorylation is one of the various pivotal modifications of carbohydrates, and is catalyzed by specific sugar kinases. These kinases exhibit considerable differences in their folding pattern and substrate specificity. Based on sequence analysis, they can be divided into four families, namely HSP 70_NBD family, FGGY family, Mer_B like family and Parm_like family. The FGGY family carbohydrate kinases contain different types of sugar kinases, all of which possess different catalytic substrates with preferences for short-chained sugar substrates, ranging from triose to heptose. These sugar substrates include L-ribulose, erythritol, L-fuculose, D-glycerol, D-gluconate, L-xylulose, D-ribulose, L-rhamnulose and D-xylulose. Structures reported in the Protein Data Bank of the FGGY family carbohydrate kinases exhibit a similar overall architecture containing two protein domains, one of which is responsible for the binding of substrate, while the second is used for binding cofactor ATP. While the binding pockets for substrates are at the same position, each FGGY family carbohydrate kinases uses different substrate-binding residues, resulting in high substrate specificity.</text></passage><passage><infon key="section_type">INTRO</infon><infon key="type">paragraph</infon><offset>2917</offset><text>Synpcc7942_2462 from the cyanobacteria Synechococcus elongatus PCC 7942 encodes a putative sugar kinase (SePSK), and this kinase contains 426 amino acids. The At2g21370 gene product from Arabidopsis thaliana, xylulose kinase-1 (AtXK-1), whose mature form contains 436 amino acids, is located in the chloroplast (ChloroP 1.1 Server). SePSK and AtXK-1 display a sequence identity of 44.9%, and belong to the ribulokinase-like carbohydrate kinases, a sub-family of FGGY family carbohydrate kinases. Members of this sub-family are responsible for the phosphorylation of sugars similar to L-ribulose and D-ribulose. The sequence and the substrate specificity of ribulokinase-like carbohydrate kinases are different, but they share the common folding feature with two domains. Domain I exhibits a ribonuclease H-like folding pattern, and is responsible for the substrate binding, while domain II possesses an actin-like ATPase domain that binds cofactor ATP.</text></passage><passage><infon key="section_type">INTRO</infon><infon key="type">paragraph</infon><offset>3870</offset><text>Two possible xylulose kinases (xylulose kinase-1: XK-1 and xylulose kinase-2: XK-2) from Arabidopsis thaliana were previously proposed. It was shown that XK-2 (At5g49650) located in the cytosol is indeed xylulose kinase. However, the function of XK-1 (At2g21370) inside the chloroplast stroma has remained unknown. SePSK from Synechococcus elongatus strain PCC 7942 is the homolog of AtXK-1, though its physiological function and substrates remain unclear. In order to obtain functional and structural information about these two proteins, here we reported the crystal structures of SePSK and AtXK-1. Our findings provide new details of the catalytic mechanism of SePSK and lay the foundation for future studies into its homologs in eukaryotes.</text></passage><passage><infon key="section_type">RESULTS</infon><infon key="type">title_1</infon><offset>4615</offset><text>Results and Discussion</text></passage><passage><infon key="section_type">RESULTS</infon><infon key="type">title_2</infon><offset>4638</offset><text>Overall structures of apo-SePSK and apo-AtXK-1</text></passage><passage><infon key="section_type">RESULTS</infon><infon key="type">paragraph</infon><offset>4685</offset><text>The attempt to solve the SePSK structure by molecular replacement method failed with ribulokinase from Bacillus halodurans (PDB code: 3QDK, 15.7% sequence identity) as an initial model. We therefore used single isomorphous replacement anomalous scattering method (SIRAS) for successful solution of the apo-SePSK structure at a resolution of 2.3 Å. Subsequently, the apo-SePSK structure was used as molecular replacement model to solve all other structures identified in this study.</text></passage><passage><infon key="section_type">RESULTS</infon><infon key="type">paragraph</infon><offset>5168</offset><text>Our structural analysis showed that apo-SePSK consists of one SePSK protein molecule in an asymmetric unit. The amino-acid residues were traced from Val2 to His419, except for the Met1 residue and the seven residues at the C-termini. Apo-SePSK contains two domains referred to further on as domain I and domain II (Fig 1A). Domain I consists of non-contiguous portions of the polypeptide chains (aa. 2–228 and aa. 402–419), exhibiting 11 α-helices and 11 β-sheets. Among all these structural elements, α4/α5/α11/α18, β3/β2/β1/β6/β19/β20/β17 and α21/α32 form three patches, referred to as A1, B1 and A2, exhibiting the core region. In addition, four β-sheets (β7, β10, β12 and β16) and five α-helices (α8, α9, α13, α14 and α15) flank the left side of the core region. Domain II is comprised of aa. 229–401 and classified into B2 (β31/β29/β22/β23/β25/β24) and A3 (α26/α27/α28/α30) (Fig 1A and S1 Fig). In the SePSK structure, B1 and B2 are sandwiched by A1, A2 and A3, and the whole structure shows the A1/B1/A2/B2/A3 (α/β/α/β/α) folding pattern, which is in common with other members of FGGY family carbohydrate kinases (S2 Fig). The overall folding of SePSK resembles a clip, with A2 of domain I acting as a hinge region. As a consequence, a deep cleft is formed between the two domains.</text></passage><passage><infon key="file">pone.0156067.g001.jpg</infon><infon key="id">pone.0156067.g001</infon><infon key="section_type">FIG</infon><infon key="type">fig_title_caption</infon><offset>6599</offset><text>Overall structures of SePSK and AtXK-1.</text></passage><passage><infon key="file">pone.0156067.g001.jpg</infon><infon key="id">pone.0156067.g001</infon><infon key="section_type">FIG</infon><infon key="type">fig_caption</infon><offset>6639</offset><text>(A) Three-dimensional structure of apo-SePSK. The secondary structural elements are indicated (α-helix: cyan, β-sheet: yellow). (B) Three-dimensional structure of apo-AtXK-1. The secondary structural elements are indicated (α-helix: green, β-sheet: wheat).</text></passage><passage><infon key="section_type">RESULTS</infon><infon key="type">paragraph</infon><offset>6910</offset><text>Apo-AtXK-1 exhibits a folding pattern similar to that of SePSK in line with their high sequence identity (Fig 1B and S1 Fig). However, superposition of structures of AtXK-1 and SePSK shows some differences, especially at the loop regions. A considerable difference is found in the loop3 linking β3 and α4, which is stretched out in the AtXK-1 structure, while in the SePSK structure, it is bent back towards the inner part. The corresponding residues between these two structures (SePSK-Lys35 and AtXK-1-Lys48) have a distance of 15.4 Å (S3 Fig).</text></passage><passage><infon key="section_type">RESULTS</infon><infon key="type">title_2</infon><offset>7464</offset><text>Activity assays of SePSK and AtXK-1</text></passage><passage><infon key="section_type">RESULTS</infon><infon key="type">paragraph</infon><offset>7500</offset><text>In order to understand the function of these two kinases, we performed structural comparison using Dali server. The structures most closely related to SePSK are xylulose kinase, glycerol kinase and ribulose kinase, implying that SePSK and AtXK-1 might function similarly to these kinases. We first tested whether both enzymes possessed ATP hydrolysis activity in the absence of substrates. As shown in Fig 2A, both SePSK and AtXK-1 exhibited ATP hydrolysis activity. This finding is in agreement with a previous result showing that xylulose kinase (PDB code: 2ITM) possessed ATP hydrolysis activity without adding substrate. To further identify the actual substrate of SePSK and AtXK-1, five different sugar molecules, including D-ribulose, L-ribulose, D-xylulose, L-xylulose and Glycerol, were used in enzymatic activity assays. As shown in Fig 2B, the ATP hydrolysis activity of SePSK greatly increased upon adding D-ribulose than adding other potential substrates, suggesting that it has D-ribulose kinase activity. In contrary, limited increasing of ATP hydrolysis activity was detected for AtXK-1 upon addition of D-ribulose (Fig 2C), despite its structural similarity with SePSK.</text></passage><passage><infon key="file">pone.0156067.g002.jpg</infon><infon key="id">pone.0156067.g002</infon><infon key="section_type">FIG</infon><infon key="type">fig_title_caption</infon><offset>8686</offset><text>The enzymatic activity assays of SePSK and AtXK-1.</text></passage><passage><infon key="file">pone.0156067.g002.jpg</infon><infon key="id">pone.0156067.g002</infon><infon key="section_type">FIG</infon><infon key="type">fig_caption</infon><offset>8737</offset><text>(A) The ATP hydrolysis activity of SePSK and AtXK-1. Both SePSK and AtXK-1 showed ATP hydrolysis activity in the absence of substrate. While the ATP hydrolysis activity of SePSK greatly increases upon addition of D-ribulose (DR). (B) The ATP hydrolysis activity of SePSK with addition of five different substrates. The substrates are DR (D-ribulose), LR (L-ribulose), DX (D-xylulose), LX (L-xylulose) and GLY (Glycerol). (C) The ATP hydrolysis activity of SePSK and AtXK-1 with or without D-ribulose. (D) The ATP hydrolysis activity of wild-type (WT) and single-site mutants of SePSK. Three single-site mutants of SePSK are D8A-SePSK, T11A-SePSK and D221A-SePSK. The ATP hydrolysis activity measured via luminescent ADP-Glo assay (Promega).</text></passage><passage><infon key="section_type">RESULTS</infon><infon key="type">paragraph</infon><offset>9478</offset><text>To understand the catalytic mechanism of SePSK, we performed structural comparisons among xylulose kinase, glycerol kinase, ribulose kinase and SePSK. Our results suggested that three conserved residues (D8, T11 and D221 of SePSK) play an important role in SePSK function. Mutations of the corresponding residue in xylulose kinase and glycerol kinase from Escherichia coli greatly reduced their activity. To identify the function of these three residues of SePSK, we constructed D8A, T11A and D221A mutants. Using enzymatic activity assays, we found that all of these mutants exhibit much lower activity of ATP hydrolysis after adding D-ribulose than that of wild type, indicating the possibility that these three residues are involved in the catalytic process of phosphorylation D-ribulose and are vital for the function of SePSK (Fig 2D).</text></passage><passage><infon key="section_type">RESULTS</infon><infon key="type">title_2</infon><offset>10319</offset><text>SePSK and AtXK-1 possess a similar ATP binding site</text></passage><passage><infon key="section_type">RESULTS</infon><infon key="type">paragraph</infon><offset>10371</offset><text>To obtain more detailed information of SePSK and AtXK-1 in complex with ATP, we soaked the apo-crystals in the reservoir adding cofactor ATP, and obtained the structures of SePSK and AtXK-1 bound with ATP at the resolution of 2.3 Å and 1.8 Å, respectively. In both structures, a strong electron density was found in the conserved ATP binding pocket, but can only be fitted with an ADP molecule (S4 Fig). Thus the two structures were named ADP-SePSK and ADP-AtXK-1, respectively. The extremely weak electron densities of ATP γ-phosphate in both structures suggest that the γ-phosphate group of ATP is either flexible or hydrolyzed by SePSK and AtXK-1. This result was consistent with our enzymatic activity assays where SePSK and AtXK-1 showed ATP hydrolysis activity without adding any substrates (Fig 2A and 2C).</text></passage><passage><infon key="section_type">RESULTS</infon><infon key="type">paragraph</infon><offset>11193</offset><text>To avoid hydrolysis of ATP, we soaked the crystals of apo-SePSK and apo-AtXK-1 into the reservoir adding AMP-PNP. However, we found that the electron densities of γ-phosphate group of AMP-PNP (AMP-PNP γ-phosphate) are still weak in the AMP-PNP-SePSK and AMP-PNP-AtXK-1 structures, suggesting high flexibility of ATP-γ-phosphate. The γ-phosphate group of ATP is transferred to the sugar substrate during the reaction process, so this flexibility might be important for the ability of these kinases. The overall structures as well as the coordination modes of ADP and AMP-PNP in the AMP-PNP-AtXK-1, ADP-AtXK-1, ADP-SePSK and AMP-PNP-SePSK structures are nearly identical (S5 Fig), therefore the structure of AMP-PNP-SePSK is used here to describe the structural details and to compare with those of other family members. As shown in Fig 3A, one SePSK protein molecule is in an asymmetric unit with one AMP-PNP molecule. The AMP-PNP is bound at the domain II, where it fits well inside a positively charged groove. The AMP-PNP binding pocket consists of four α-helices (α26, α28, α27 and α30) and forms a shape resembling a half-fist (Fig 3A and 3B). The head group of the AMP-PNP is embedded in a pocket surrounded by Trp383, Asn380, Gly376 and Gly377. The purine ring of AMP-PNP is positioned in parallel to the indole ring of Trp383. In addition, it is hydrogen-bonded with the side chain amide of Asn380 (Fig 3B). The tail of AMP-PNP points to the hinge region of SePSK, and its α-phosphate and β-phosphate groups are stabilized by Gly376 and Ser243, respectively. Together, this structure clearly shows that the AMP-PNP-β-phosphate is sticking out of the ATP binding pocket, thus the γ-phosphate group is at the empty space between domain I and domain II and is unconstrained in its movement by the protein.</text></passage><passage><infon key="file">pone.0156067.g003.jpg</infon><infon key="id">pone.0156067.g003</infon><infon key="section_type">FIG</infon><infon key="type">fig_title_caption</infon><offset>13053</offset><text>Structure of SePSK in complex with AMP-PNP.</text></passage><passage><infon key="file">pone.0156067.g003.jpg</infon><infon key="id">pone.0156067.g003</infon><infon key="section_type">FIG</infon><infon key="type">fig_caption</infon><offset>13097</offset><text>(A) The electron density of AMP-PNP. The SePSK structure is shown in the electrostatic potential surface mode. The AMP-PNP is depicted as sticks with its ǀFoǀ-ǀFcǀ map contoured at 3 σ shown as cyan mesh. (B) The AMP-PNP binding pocket. The head of AMP-PNP is sandwiched by four residues (Leu293, Gly376, Gly377 and Trp383). The protein skeleton is shown as cartoon (cyan). The four α-helices (α26, α28, α27 and α30) are labeled in red. The AMP-PNP and coordinated residues are shown as sticks. The interactions between them are represented as black dashed lines. The numerical note near the black dashed line indicates the distance (Å).</text></passage><passage><infon key="section_type">RESULTS</infon><infon key="type">title_2</infon><offset>13759</offset><text>The potential substrate binding site in SePSK</text></passage><passage><infon key="section_type">RESULTS</infon><infon key="type">paragraph</infon><offset>13805</offset><text>The results from our activity assays suggested that SePSK has D-ribulose kinase activity. To better understand the interaction pattern between SePSK and D-ribulose, the apo-SePSK crystals were soaked into the reservoir with 10 mM D-ribulose (RBL) and the RBL-SePSK structure was solved. As shown in S6 Fig, two residual electron densities are visible in domain I, which can be interpreted as two D-ribulose molecules with reasonable fit.</text></passage><passage><infon key="section_type">RESULTS</infon><infon key="type">paragraph</infon><offset>14243</offset><text>As shown in Fig 4A, the nearest distance between the carbon skeleton of two D-ribulose molecules are approx. 7.1 Å (RBL1-C4 and RBL2-C1). RBL1 is located in the pocket consisting of α21 and the loop between β6 and β7. The O4 and O5 of RBL1 are coordinated with the side chain carboxyl group of Asp221. Furthermore, the O2 of RBL1 interacts with the main chain amide nitrogen of Ser72 (Fig 4B). This pocket is at a similar position of substrate binding site of other sugar kinase, such as L-ribulokinase (PDB code: 3QDK) (S7 Fig). However, structural comparison shows that the substrate ligating residues between the two structures are not strictly conserved. Based on the structures, the ligating residues of RBL1 in RBL-SePSK structure are Ser72, Asp221 and Ser222, and the interacting residues of L-ribulose with L-ribulokinase are Ala96, Lys208, Asp274 and Glu329 (S7 Fig). Glu329 in 3QDK has no counterpart in RBL-SePSK structure. In addition, although Lys208 of L-ribulokinase has the corresponding residue (Lys163) in RBL-SePSK structure, the hydrogen bond of Lys163 is broken because of the conformational change of two α-helices (α9 and α13) of SePSK. These differences might account for their different substrate specificity.</text></passage><passage><infon key="file">pone.0156067.g004.jpg</infon><infon key="id">pone.0156067.g004</infon><infon key="section_type">FIG</infon><infon key="type">fig_title_caption</infon><offset>15500</offset><text>The binding of D-ribulose (RBL) with SePSK.</text></passage><passage><infon key="file">pone.0156067.g004.jpg</infon><infon key="id">pone.0156067.g004</infon><infon key="section_type">FIG</infon><infon key="type">fig_caption</infon><offset>15544</offset><text>(A) The electrostatic potential surface map of RBL-SePSK and a zoom-in view of RBL binding site. The RBL1 and RBL2 are depicted as sticks. (B) Interaction of two D-ribulose molecules (RBL1 and RBL2) with SePSK. The RBL molecules (carbon atoms colored yellow) and amino acid residues of SePSK (carbon atoms colored green) involved in RBL interaction are shown as sticks. The hydrogen bonds are indicated by the black dashed lines and the numbers near the dashed lines are the distances (Å). (C) The binding affinity assays of SePSK with D-ribulose. Single-cycle kinetic data are reflecting the interaction of SePSK and D8A-SePSK with D-ribulose. It shows two experimental sensorgrams after minus the empty sensorgrams. The original data is shown as black curve, and the fitted data is shown as different color (wild type SePSK: red curve, D8A-SePSK: green curve). Dissociation rate constant of wild type and D8A-SePSK are 3 ms-1 and 9 ms-1, respectively.</text></passage><passage><infon key="section_type">RESULTS</infon><infon key="type">paragraph</infon><offset>16499</offset><text>The binding pocket of RBL2 with relatively weak electron density is near the N-terminal region of SePSK and is negatively charged. The side chain of Asp8 interacts strongly with O3 and O4 of RBL2. The hydroxyl group of Ser12 coordinates with O2 of RBL2. The backbone amide nitrogens of Gly13 and Arg15 also keep hydrogen bonds with RBL2 (Fig 4B). Structural comparison of SePSK and AtXK-1 showed that while the RBL1 binding pocket is conserved, the RBL2 pocket is disrupted in AtXK-1 structure, despite the fact that the residues interacting with RBL2 are highly conserved between the two proteins. In the RBL-SePSK structure, a 2.6 Å hydrogen bond is present between RBL2 and Ser12 (Fig 4B), while in the AtXK-1 structure this hydrogen bond with the corresponding residue (Ser22) is broken. This break is probably induced by the conformational change of the two β-sheets (β1 and β2), with the result that the linking loop (loop 1) is located further away from the RBL2 binding site. This change might be the reason that AtXK-1 only shows limited increasing in its ATP hydrolysis ability upon adding D-ribulose as a substrate after comparing with SePSK (Fig 2C).</text></passage><passage><infon key="section_type">RESULTS</infon><infon key="type">paragraph</infon><offset>17671</offset><text>Our SePSK structure shows that the Asp8 residue forms strong hydrogen bond with RBL2 (Fig 4B). In addition, our enzymatic assays indicated that Asp8 is important for the activity of SePSK (Fig 2D). To further verified this result, we measured the binding affinity for D-ribulose of both wild type (WT) and D8A mutant of SePSK using a surface plasmon resonance method. The results showed that the affinity of D8A-SePSK with D-ribulose is weaker than that of WT with a reduction of approx. two third (Fig 4C). Dissociation rate constant (Kd) of wild type and D8A-SePSK are 3 ms-1 and 9 ms-1, respectively. The results implied that the second RBL binding site plays a role in the D-ribulose kinase function of SePSK. However, considering the high concentration of D-ribulose used for crystal soaking, as well as the relatively weak electron density of RBL2, it is also possible that the second binding site of D-ribulose in SePSK is an artifact.</text></passage><passage><infon key="section_type">RESULTS</infon><infon key="type">title_2</infon><offset>18614</offset><text>Simulated conformational change of SePSK during the catalytic process</text></passage><passage><infon key="section_type">RESULTS</infon><infon key="type">paragraph</infon><offset>18684</offset><text>It was reported earlier that the crossing angle between the domain I and domain II in FGGY family carbohydrate kinases is different. In addition, this difference may be caused by the binding of substrates and/or ATP. As reported previously, members of the sugar kinase family undergo a conformational change to narrow the crossing angle between two domains and reduce the distance between substrate and ATP in order to facilitate the catalytic reaction of phosphorylation of sugar substrates. After comparing structures of apo-SePSK, RBL-SePSK and AMP-PNP-SePSK, we noticed that these structures presented here are similar. Superposing the structures of RBL-SePSK and AMP-PNP-SePSK, the results show that the nearest distance between AMP-PNP γ-phosphate and RBL1/RBL2 is 7.5 Å (RBL1-O5)/6.7 Å (RBL2-O1) (S8 Fig). This distance is too long to transfer the γ-phosphate group from ATP to the substrate. Since the two domains of SePSK are widely separated in this structure, we hypothesize that our structures of SePSK represent its open form, and that a conformational rearrangement must occur to switch to the closed state in order to facilitate the catalytic process of phosphorylation of sugar substrates.</text></passage><passage><infon key="section_type">RESULTS</infon><infon key="type">paragraph</infon><offset>19898</offset><text>For studying such potential conformational change, a simulation on the Hingeprot Server was performed to predict the movement of different SePSK domains. The results showed that domain I and domain II are closer to each other with Ala228 and Thr401 in A2 as Hinge-residues. Based on the above results, SePSK is divided into two rigid parts. The domain I of RBL-SePSK (aa. 1–228, aa. 402–421) and the domain II of AMP-PNP-SePSK (aa. 229–401) were superposed with structures, including apo-AtXK-1, apo-SePSK, xylulose kinase from Lactobacillus acidophilus (PDB code: 3LL3) and the S58W mutant form of glycerol kinase from Escherichia coli (PDB code: 1GLJ). The results of superposition displayed different crossing angle between these two domains. After superposition, the distances of AMP-PNP γ-phosphate and the fifth hydroxyl group of RBL1 are 7.9 Å (superposed with AtXK-1), 7.4 Å (superposed with SePSK), 6.6 Å (superposed with 3LL3) and 6.1 Å (superposed with 1GLJ). Meanwhile, the distances of AMP-PNP γ-phosphate and the first hydroxyl group of RBL2 are 7.2 Å (superposed with AtXK-1), 6.7 Å (superposed with SePSK), 3.7 Å (superposed with 3LL3), until AMP-PNP γ-phosphate fully contacts RBL2 after superposition with 1GLJ (Fig 5). This distance between RBL2 and AMP-PNP-γ-phosphate is close enough to facilitate phosphate transferring. Together, our superposition results provided snapshots of the conformational changes at different catalytic stages of SePSK and potentially revealed the closed form of SePSK.</text></passage><passage><infon key="file">pone.0156067.g005.jpg</infon><infon key="id">pone.0156067.g005</infon><infon key="section_type">FIG</infon><infon key="type">fig_title_caption</infon><offset>21433</offset><text>Simulated conformational change of SePSK during the catalytic process.</text></passage><passage><infon key="file">pone.0156067.g005.jpg</infon><infon key="id">pone.0156067.g005</infon><infon key="section_type">FIG</infon><infon key="type">fig_caption</infon><offset>21504</offset><text>The structures are shown as cartoon and the ligands are shown as sticks. Domain I from D-ribulose-SePSK (green) and Domain II from AMP-PNP-SePSK (cyan) are superposed with apo-AtXK-1 (1st), apo-SePSK (2nd), 3LL3 (3rd) and 1GLJ (4th), respectively. The numbers near the black dashed lines show the distances (Å) between two nearest atoms of RBL and AMP-PNP.</text></passage><passage><infon key="section_type">RESULTS</infon><infon key="type">paragraph</infon><offset>21862</offset><text>In summary, our structural and enzymatic analyses provide evidence that SePSK shows D-ribulose kinase activity, and exhibits the conserved features of FGGY family carbohydrate kinases. Three conserved residues in SePSK were identified to be essential for this function. Our results provide the detailed information about the interaction of SePSK with ATP and substrates. Moreover, structural superposition results enable us to visualize the conformational change of SePSK during the catalytic process. In conclusion, our results provide important information for a more detailed understanding of the mechanisms of SePSK and other members of FGGY family carbohydrate kinases.</text></passage><passage><infon key="section_type">METHODS</infon><infon key="type">title_1</infon><offset>22537</offset><text>Materials and Methods</text></passage><passage><infon key="section_type">METHODS</infon><infon key="type">title_2</infon><offset>22559</offset><text>Cloning, expression and purification of SePSK</text></passage><passage><infon key="section_type">METHODS</infon><infon key="type">paragraph</infon><offset>22605</offset><text>The gene encoding SePSK was amplified by polymerase chain reaction (PCR) with forward primer 5' CATGCCATGGGCATGGTCGTTGCACTTGGCCTCG 3' containing an internal Nco I restriction site (underlined) and reverse primer 5' CCGCTCGAGGGTTCTCTTTAACCCCGCCG 3' including an internal Xho I restriction site (underlined) from Synechococcus elongatus PCC 7942 genomic DNA. The amplified PCR product was digested with Nco I and Xho I (Takara) and ligated into linearized pET28-a vector (Novagen) between Nco I and Xho I restriction sites with a C-terminal his6 tag. The recombinant plasmids were transformed into competent Escherichia coli Trans10 cells for DNA production and purification, and the final constructs were verified by sequencing. The recombinant vectors were transformed into Escherichia coli BL21 (DE3) to express the protein. After induction with the 1 mM IPTG at 289 K in Luria-Bertani medium until the cell density reached an OD 600 nm of 0.6–0.8, the cells were harvested by centrifugation at 6,000 g at 4°C for 15 min, re-suspended in buffer A (20 mM Tris-HCl, pH 8.0, 500 mM NaCl, 5 mM imidazole) and disrupted by sonication. After centrifuge 40,000 g for 30 min, the protein was purified by passage through a Ni2+ affinity column in buffer A, and then washed the unbound protein with buffer B (20 mM Tris-HCl, pH 8.0, 500 mM NaCl, 60 mM imidazole), and eluted the fraction with the buffer C (20 mM Tris-HCl, pH 8.0, 500 mM NaCl, 500 mM imidazole). After that, the protein was further purified by size exclusion chromatography with Superdex 200 10/300 GL (GE Healthcare) equilibrated with the buffer D (20 mM Tris-HCl, pH 8.0, 300 mM NaCl). The eluted major peak fraction was concentrated to 20 mg/mL protein using 10,000 MCWO centrifugal filter units (Millipore) and stored at -80°C for crystallization trials. The purified product was analyzed by SDS-PAGE with a single band visible only.</text></passage><passage><infon key="section_type">METHODS</infon><infon key="type">title_2</infon><offset>24505</offset><text>Cloning, expression and purification of AtXK-1</text></passage><passage><infon key="section_type">METHODS</infon><infon key="type">paragraph</infon><offset>24552</offset><text>The gene encoding AtXK-1 was amplified by PCR using a forward primer 5' TACTTCCAATCCAATGCTGTTATGAGTGGCAATAAAGGAACGA 3' and reverse primer 5' TTATCCACTTCCAATGTTACAAACCACTGTTCTGTTTTGCGCCC 3' from cDNA library of Arabidopsis thaliana. The underlined nucleotides were used for the ligation-independent cloning. The PCR product was treated by T4 DNA polymerase (LIC-qualified, Novagen) and then cloned into linearized pMCSG7 vector treated by T4 DNA polymerase (LIC-qualified, Novagen) with an N-terminal his6 tag though ligation-independent cloning method. The final construct was confirmed by DNA sequencing after amplified in competent Escherichia coli Trans10 cells. The recombinant vectors were transformed into Escherichia coli BL21 (DE3) for protein expression. After induction with 1 mM IPTG at 289 K in Luria-Bertani medium, cells were grown until the cell density reached an OD 600 nm of 0.6–0.8. Subsequent purification was identical to that used for SePSK, except that there was one additional step, during which tobacco etch virus protease was used to digest the crude AtXK-1 protein for removal of the N-terminal his6 tag following Ni2+ affinity purification. Ni2+ affinity column buffer contained extra 20% glycerol. The protein was further purified by size exclusion chromatography with Superdex 200 10/300 GL (GE Healthcare) in elution buffer consisting of 20 mM HEPES, pH 7.5, 100 mM NaCl. Finally, AtXK-1 protein was concentrated to 40 mg/mL protein using 10,000 MCWO centrifugal filter units (Millipore) and stored at -80°C prior to crystallization trials. Purity was verified by SDS-PAGE with a single band visible only.</text></passage><passage><infon key="section_type">METHODS</infon><infon key="type">title_2</infon><offset>26192</offset><text>Site-directed mutagenesis of SePSK</text></passage><passage><infon key="section_type">METHODS</infon><infon key="type">paragraph</infon><offset>26227</offset><text>The gene of D8A and T11A mutations were amplified by PCR with the forward primer 5' CATGCCATGGGCATGGTCGTTGCACTTGGCCTCGCCTTCGGCAC 3' and forward primer 5' CATGCCATGGGCATGGTCGTTGCACTTGGCCTCGACTTCGGCGCCTCTGGAGCCC 3' (mismatched base pairs are underlined). The reverse primers of D8A and T11A mutants, the further constructions and purification procedures were identical with those used for wild type SePSK.</text></passage><passage><infon key="section_type">METHODS</infon><infon key="type">paragraph</infon><offset>26631</offset><text>The N-terminal sequence of D221A was amplified with forward primer (T7 promoter primer) 5' TAATACGACTCACTATA 3' and reverse primer 5' AGCAGCAATGCTAGCCGTTGTACCG 3’, and the C-terminal sequence of D221A was amplified with forward primer 5' TGCCGGTACAACGGCTAGCATTGCT 3' and reverse primer (T7 terminator primer) CGATCAATAACGAGTCGCC (mismatched base pairs are underlined). The second cycle PCR used the above PCR products as templates, and the construction and purification procedures were identical to those used for wild type SePSK.</text></passage><passage><infon key="section_type">METHODS</infon><infon key="type">title_2</infon><offset>27164</offset><text>Crystallization and data collection</text></passage><passage><infon key="section_type">METHODS</infon><infon key="type">paragraph</infon><offset>27200</offset><text>Crystallization trials of SePSK and AtXK-1 were carried out at 281 K by mixing equal volume of 20 mg/ml protein and reservoir solution with the sitting-drop vapor diffusion method. The reservoir solution was PEG Rx I-35 (0.1 M BIS-TRIS pH 6.5, 20% w/v Polyethylene glycol monomethyl ether 5,000) (Hampton research). After 2 or 3 days, the rod-like crystals could be observed. For phasing, the high-quality apo-SePSK crystals were soaked in mother liquor containing 1 mM ethylmercuricthiosalicylic acid, sodium salt (Hampton research, heavy atom kit) overnight at 281 K. In order to get the complexes with ATP and AMP-PNP, the crystals of apo-SePSK and apo-AtXK-1 were incubated with the reservoir including 10 mM ATP and 20 mM MgCl2 as well as 10 mM AMP-PNP and 20 mM MgCl2, respectively. The apo-SePSK crystals were incubated with the reservoir including 10 mM D-ribulose in order to obtain the complex D-ribulose-bound SePSK (RBL-SePSK). The crystals of three mutants (D8A, T11A and D221A) grew in the same condition as that of the wild type SePSK. The crystals were dipped into reservoir solution supplemented with 15% glycerol and then flash frozen in a nitrogen gas stream at 100 K. All data sets were collected at Shanghai Synchrotron Radiation Facility, Photo Factory in Japan and Institute of Biophysics, Chinese Academy of Sciences. Diffraction data were processed using the HKL2000 package.</text></passage><passage><infon key="section_type">METHODS</infon><infon key="type">title_2</infon><offset>28601</offset><text>Structure determination and refinement</text></passage><passage><infon key="section_type">METHODS</infon><infon key="type">paragraph</infon><offset>28640</offset><text>The initial phases of SePSK were obtained from the Hg-derivative crystals by single isomorphous replacement anomalous scattering (SIRAS) using AutoSol from the PHENIX suite. AutoBuild from the PHENIX suite was used to build 75% of the main chain of apo-SePSK, and the remaining residues were built manually by Coot. All other structures were solved by molecular replacement method using apo-SePSK as an initial model. The model was refined using phenix.refine and REFMAC5. The final model was checked with PROCHECK. All structural figures were prepared by PyMOL. The summary of the data-collection and structure-refinement statistics is shown in Table 1 and S1 Table. Atomic coordinates and structure factors in this article have been deposited in the Protein Data Bank. The deposited codes of all structures listed in the Table 1 and S1 Table.</text></passage><passage><infon key="file">pone.0156067.t001.xml</infon><infon key="id">pone.0156067.t001</infon><infon key="section_type">TABLE</infon><infon key="type">table_title_caption</infon><offset>29485</offset><text>Data collection and refinement statistics.</text></passage><passage><infon key="file">pone.0156067.t001.xml</infon><infon key="id">pone.0156067.t001</infon><infon key="section_type">TABLE</infon><infon key="type">table</infon><infon key="xml"><?xml version="1.0" encoding="UTF-8"?>
<table frame="hsides" rules="groups"><colgroup span="1"><col align="left" valign="middle" span="1"/><col align="left" valign="middle" span="1"/><col align="left" valign="middle" span="1"/><col align="left" valign="middle" span="1"/><col align="left" valign="middle" span="1"/><col align="left" valign="middle" span="1"/></colgroup><thead><tr><th align="justify" rowspan="1" colspan="1">Data set</th><th align="justify" rowspan="1" colspan="1">Hg-SePSK</th><th align="justify" rowspan="1" colspan="1">apo-SePSK</th><th align="justify" rowspan="1" colspan="1">AMP-PNP-SePSK</th><th align="justify" rowspan="1" colspan="1">RBL-SePSK</th><th align="justify" rowspan="1" colspan="1">apo-AtXK-1</th></tr></thead><tbody><tr><td align="justify" rowspan="1" colspan="1">Data collection</td><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1"/></tr><tr><td align="justify" rowspan="1" colspan="1">Space group</td><td align="justify" rowspan="1" colspan="1">C 1 2 1</td><td align="justify" rowspan="1" colspan="1">C 1 2 1</td><td align="justify" rowspan="1" colspan="1">C 1 2 1</td><td align="justify" rowspan="1" colspan="1">C 1 2 1</td><td align="justify" rowspan="1" colspan="1">P21</td></tr><tr><td align="justify" rowspan="1" colspan="1">Wavelength (Å)</td><td align="justify" rowspan="1" colspan="1">1.54178</td><td align="justify" rowspan="1" colspan="1">1.54178</td><td align="justify" rowspan="1" colspan="1">1.54178</td><td align="justify" rowspan="1" colspan="1">1.54178</td><td align="justify" rowspan="1" colspan="1">1.54178</td></tr><tr><td align="justify" rowspan="1" colspan="1">Cell parameters</td><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1"/></tr><tr><td align="justify" rowspan="1" colspan="1">a/b/c(Å)</td><td align="justify" rowspan="1" colspan="1">103.1, 46.6, 88.3</td><td align="justify" rowspan="1" colspan="1">110.2, 49.0, 86.9</td><td align="justify" rowspan="1" colspan="1">103.5, 46.6, 88.0</td><td align="justify" rowspan="1" colspan="1">102.6, 47.0, 88.7</td><td align="justify" rowspan="1" colspan="1">49.7, 87.9, 53.6</td></tr><tr><td align="justify" rowspan="1" colspan="1">α/β/γ(°)</td><td align="justify" rowspan="1" colspan="1">90.0, 91.9, 90.0</td><td align="justify" rowspan="1" colspan="1">90.0, 110.3, 90.0</td><td align="justify" rowspan="1" colspan="1">90.0, 91.0, 90.0</td><td align="justify" rowspan="1" colspan="1">90.0, 91.4, 90.0</td><td align="justify" rowspan="1" colspan="1">90.0, 97.0, 90.0</td></tr><tr><td align="justify" rowspan="1" colspan="1">Resolution (Å)<xref ref-type="table-fn" rid="t001fn001"><sup>a</sup></xref></td><td align="justify" rowspan="1" colspan="1">50.00–2.20(2.28–2.20)</td><td align="justify" rowspan="1" colspan="1">50.00–2.30(2.38–2.30)</td><td align="justify" rowspan="1" colspan="1">50.00–2.30(2.38–2.30)</td><td align="justify" rowspan="1" colspan="1">50.00–2.35(2.43–2.35)</td><td align="justify" rowspan="1" colspan="1">50.00–2.00(2.07–2.00)</td></tr><tr><td align="justify" rowspan="1" colspan="1">R merge<xref ref-type="table-fn" rid="t001fn002"><sup>b</sup></xref></td><td align="justify" rowspan="1" colspan="1">0.105(0.514)</td><td align="justify" rowspan="1" colspan="1">0.149(0.501)</td><td align="justify" rowspan="1" colspan="1">0.082(0.503)</td><td align="justify" rowspan="1" colspan="1">0.095(0.507)</td><td align="justify" rowspan="1" colspan="1">0.106(0.454)</td></tr><tr><td align="justify" rowspan="1" colspan="1">〈 I/σ(I)〉</td><td align="justify" rowspan="1" colspan="1">28.89(4.07)</td><td align="justify" rowspan="1" colspan="1">13.85(4.10)</td><td align="justify" rowspan="1" colspan="1">10.18(1.79)</td><td align="justify" rowspan="1" colspan="1">19.4(4.6)</td><td align="justify" rowspan="1" colspan="1">12.91(4.08)</td></tr><tr><td align="justify" rowspan="1" colspan="1">Completeness (%)</td><td align="justify" rowspan="1" colspan="1">92.3(99.2)</td><td align="justify" rowspan="1" colspan="1">96.1(94.2)</td><td align="justify" rowspan="1" colspan="1">98.9(99.8)</td><td align="justify" rowspan="1" colspan="1">99.8(100.0)</td><td align="justify" rowspan="1" colspan="1">97.1(94.5)</td></tr><tr><td align="justify" rowspan="1" colspan="1">Redundancy</td><td align="justify" rowspan="1" colspan="1">6.7(5.1)</td><td align="justify" rowspan="1" colspan="1">7.4(7.5)</td><td align="justify" rowspan="1" colspan="1">2.4(2.4)</td><td align="justify" rowspan="1" colspan="1">6.9(6.7)</td><td align="justify" rowspan="1" colspan="1">7.2(6.9)</td></tr><tr><td align="justify" rowspan="1" colspan="1">Refinement statistics</td><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1"/></tr><tr><td align="justify" rowspan="1" colspan="1">Resolution (Å)</td><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1">32.501–2.301</td><td align="justify" rowspan="1" colspan="1">24.707–2.300</td><td align="justify" rowspan="1" colspan="1">24.475–2.344</td><td align="justify" rowspan="1" colspan="1">23.771–1.998</td></tr><tr><td align="justify" rowspan="1" colspan="1">R<sub>work</sub>/ R<sub>free</sub><xref ref-type="table-fn" rid="t001fn003"><sup>c</sup></xref></td><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1">0.1834/0.2276</td><td align="justify" rowspan="1" colspan="1">0.1975/0.2327</td><td align="justify" rowspan="1" colspan="1">0.2336/0.2687</td><td align="justify" rowspan="1" colspan="1">0.1893/0.2161</td></tr><tr><td align="justify" rowspan="1" colspan="1">No. atoms</td><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1"/></tr><tr><td align="justify" rowspan="1" colspan="1">Protein</td><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1">3503</td><td align="justify" rowspan="1" colspan="1">3196</td><td align="justify" rowspan="1" colspan="1">3209</td><td align="justify" rowspan="1" colspan="1">3256</td></tr><tr><td align="justify" rowspan="1" colspan="1">ligand/ion</td><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1">-</td><td align="justify" rowspan="1" colspan="1">31</td><td align="justify" rowspan="1" colspan="1">20</td><td align="justify" rowspan="1" colspan="1">-</td></tr><tr><td align="justify" rowspan="1" colspan="1">Water</td><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1">313</td><td align="justify" rowspan="1" colspan="1">146</td><td align="justify" rowspan="1" colspan="1">143</td><td align="justify" rowspan="1" colspan="1">486</td></tr><tr><td align="justify" rowspan="1" colspan="1">RMSD Bond lengths (Å)<xref ref-type="table-fn" rid="t001fn004"><sup>d</sup></xref></td><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1">0.003</td><td align="justify" rowspan="1" colspan="1">0.005</td><td align="justify" rowspan="1" colspan="1">0.003</td><td align="justify" rowspan="1" colspan="1">0.003</td></tr><tr><td align="justify" rowspan="1" colspan="1">RMSD Bond angles (°)<xref ref-type="table-fn" rid="t001fn004"><sup>d</sup></xref></td><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1">0.674</td><td align="justify" rowspan="1" colspan="1">0.886</td><td align="justify" rowspan="1" colspan="1">0.649</td><td align="justify" rowspan="1" colspan="1">0.838</td></tr><tr><td align="justify" rowspan="1" colspan="1">Ramachandran plot (%)</td><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1"/></tr><tr><td align="justify" rowspan="1" colspan="1">favoured</td><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1">98.1</td><td align="justify" rowspan="1" colspan="1">97.8</td><td align="justify" rowspan="1" colspan="1">96.7</td><td align="justify" rowspan="1" colspan="1">99.1</td></tr><tr><td align="justify" rowspan="1" colspan="1">allowed</td><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1">1.9</td><td align="justify" rowspan="1" colspan="1">2.2</td><td align="justify" rowspan="1" colspan="1">3.3</td><td align="justify" rowspan="1" colspan="1">0.9</td></tr><tr><td align="justify" rowspan="1" colspan="1">disallowed</td><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1">0.0</td><td align="justify" rowspan="1" colspan="1">0.0</td><td align="justify" rowspan="1" colspan="1">0.0</td><td align="justify" rowspan="1" colspan="1">0.0</td></tr><tr><td align="justify" rowspan="1" colspan="1">PDB code</td><td align="justify" rowspan="1" colspan="1"/><td align="justify" rowspan="1" colspan="1">5HTN</td><td align="justify" rowspan="1" colspan="1">5HTP</td><td align="justify" rowspan="1" colspan="1">5HV7</td><td align="justify" rowspan="1" colspan="1">5HTR</td></tr></tbody></table>
</infon><offset>29528</offset><text>Data set Hg-SePSK apo-SePSK AMP-PNP-SePSK RBL-SePSK apo-AtXK-1 Data collection Space group C 1 2 1 C 1 2 1 C 1 2 1 C 1 2 1 P21 Wavelength (Å) 1.54178 1.54178 1.54178 1.54178 1.54178 Cell parameters a/b/c(Å) 103.1, 46.6, 88.3 110.2, 49.0, 86.9 103.5, 46.6, 88.0 102.6, 47.0, 88.7 49.7, 87.9, 53.6 α/β/γ(°) 90.0, 91.9, 90.0 90.0, 110.3, 90.0 90.0, 91.0, 90.0 90.0, 91.4, 90.0 90.0, 97.0, 90.0 Resolution (Å)a 50.00–2.20(2.28–2.20) 50.00–2.30(2.38–2.30) 50.00–2.30(2.38–2.30) 50.00–2.35(2.43–2.35) 50.00–2.00(2.07–2.00) R mergeb 0.105(0.514) 0.149(0.501) 0.082(0.503) 0.095(0.507) 0.106(0.454) 〈 I/σ(I)〉 28.89(4.07) 13.85(4.10) 10.18(1.79) 19.4(4.6) 12.91(4.08) Completeness (%) 92.3(99.2) 96.1(94.2) 98.9(99.8) 99.8(100.0) 97.1(94.5) Redundancy 6.7(5.1) 7.4(7.5) 2.4(2.4) 6.9(6.7) 7.2(6.9) Refinement statistics Resolution (Å) 32.501–2.301 24.707–2.300 24.475–2.344 23.771–1.998 Rwork/ Rfreec 0.1834/0.2276 0.1975/0.2327 0.2336/0.2687 0.1893/0.2161 No. atoms Protein 3503 3196 3209 3256 ligand/ion - 31 20 - Water 313 146 143 486 RMSD Bond lengths (Å)d 0.003 0.005 0.003 0.003 RMSD Bond angles (°)d 0.674 0.886 0.649 0.838 Ramachandran plot (%) favoured 98.1 97.8 96.7 99.1 allowed 1.9 2.2 3.3 0.9 disallowed 0.0 0.0 0.0 0.0 PDB code 5HTN 5HTP 5HV7 5HTR </text></passage><passage><infon key="file">pone.0156067.t001.xml</infon><infon key="id">pone.0156067.t001</infon><infon key="section_type">TABLE</infon><infon key="type">table_footnote</infon><offset>30913</offset><text>a The values in parentheses correspond to the highest resolution shell.</text></passage><passage><infon key="file">pone.0156067.t001.xml</infon><infon key="id">pone.0156067.t001</infon><infon key="section_type">TABLE</infon><infon key="type">table_footnote</infon><offset>30985</offset><text>b Rmerge = ∑j∑h|Ij,h-<Ih>|/∑j∑h<Ih> where h are unique reflection indices and Ij,h are intensities of symmetry-related reflections and <Ih> is the mean intensity.</text></passage><passage><infon key="file">pone.0156067.t001.xml</infon><infon key="id">pone.0156067.t001</infon><infon key="section_type">TABLE</infon><infon key="type">table_footnote</infon><offset>31156</offset><text>c R-work and R-free were calculated as follows: R = Σ (|Fobs-Fcalc|)/Σ |Fobs| ×100, where Fobs and Fcalc are the observed and calculated structure factor amplitudes, respectively.</text></passage><passage><infon key="file">pone.0156067.t001.xml</infon><infon key="id">pone.0156067.t001</infon><infon key="section_type">TABLE</infon><infon key="type">table_footnote</infon><offset>31344</offset><text>d Root mean square deviations (r.m.s.d.) from standard values.</text></passage><passage><infon key="section_type">METHODS</infon><infon key="type">title_2</infon><offset>31407</offset><text>ADP-Glo kinase assay</text></passage><passage><infon key="section_type">METHODS</infon><infon key="type">paragraph</infon><offset>31428</offset><text>ADP-Glo kinase assay was used according to the manufacturer’s instructions (Promega). Each reaction mixture system consisted of 8 uM enzyme, 100 uM ATP, 1 mM MgCl2, 20 mM HEPES (pH 7.4), 5 mM substrate. The reaction was initiated by adding the purified enzyme into the reaction system. After incubation at 298 K for different time, equal volume ADP-Glo™ reagent was added to terminate the kinase reaction and to deplete any remaining ATP. Subsequently, kinase detection reagent with double volume of reaction system was added to convert ADP to ATP and allowed the newly synthesized ATP to be measured using a luciferase/luciferin reaction which produced luminescence signal and could be recorded. After incubation at room temperature for another 60 min, luminescence was detected by Varioskan Flash Multimode Reader (Thermo). The reference experiment was carried out in the same reaction system without the enzyme. For each assay, at least three repeats were performed for the calculation of mean values and standard deviations (SDs). The purity of five substrates in the activity assays was ≥98% (D-ribulose, Santa cruz), 99.7% (L-ribulose, Carbosynth), 99.3% (D-xylulose, Carbosynth), 99.5% (L-xylulose, Carbosynth) and 99.0% (Glycerol, AMRESCO).</text></passage><passage><infon key="section_type">METHODS</infon><infon key="type">title_2</infon><offset>32683</offset><text>Surface plasmon resonance</text></passage><passage><infon key="section_type">METHODS</infon><infon key="type">paragraph</infon><offset>32709</offset><text>Surface plasmon resonance (SPR) was used to analyze the interaction of SePSK and D-ribulose. The SPR experiments were performed on a Biacore T100 system using series S CM5 sensor chips (GE Healthcare). All sensorgrams were recorded at 298 K. The proteins in buffer containing 20 mM HEPES, pH 7.5, 100 mM NaCl, was diluted to 40 ug/ml by 10 mM sodium acetate buffer at pH 4.5. All flow cells on a CM5 sensor chip were activated with a freshly prepared solution of 0.2 M 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC) and 0.05 M N-hydroxysuccinimide (NHS) in a ratio of 1:1 at a constant flow rate of 10 ul/min for 420 s. Deactivation of the surface was performed with an injection of a 1 M solution of ethanolamine-HCl (pH 8.5) using the same flow rate and duration. Kinetic parameters were derived from data sets acquired in single-cycle mode. Each run consisted of five consecutive analytic injections at 125, 250, 500, 1000 and 2000 uM. Analytic injections lasted for 60 s, separated by 30 s dissociation periods. Each cycle was completed with an extended dissociation period of 300 s. The specific binding to a blank flow cell was subtracted to obtain corrected sensorgrams. Biacore data were analyzed using BiaEvaluation software (GE Healthcare) by fitting to a 1:1 Langmuir binding fitting model.</text></passage><passage><infon key="section_type">METHODS</infon><infon key="type">title_2</infon><offset>34017</offset><text>Accession Codes</text></passage><passage><infon key="section_type">METHODS</infon><infon key="type">paragraph</infon><offset>34033</offset><text>Coordinates and structure factors for all the structures in this article have been deposited in the Protein Data Bank. These accession codes are 5HTN, 5HTP, 5HUX, 5HV7, 5HTJ, 5HU2, 5HTY, 5HTR, 5HTV and 5HTX. The corresponding-structures are apo-SePSK, AMP-PNP-SePSK, ADP-SePSK, RBL-SePSK, D8A-SePSK, T11A-SePSK, D221A-SePSK, apo-AtXK1, AMP-PNP-AtXK1 and ADP-AtXK1, respectively.</text></passage><passage><infon key="section_type">SUPPL</infon><infon key="type">title_1</infon><offset>34412</offset><text>Supporting Information</text></passage><passage><infon key="section_type">REF</infon><infon key="type">title</infon><offset>34435</offset><text>References</text></passage><passage><infon key="fpage">e1002318</infon><infon key="issue">12</infon><infon key="name_0">surname:Zhang;given-names:Y</infon><infon key="name_1">surname:Zagnitko;given-names:O</infon><infon key="name_2">surname:Rodionova;given-names:I</infon><infon key="name_3">surname:Osterman;given-names:A</infon><infon key="name_4">surname:Godzik;given-names:A</infon><infon key="pub-id_doi">10.1371/journal.pcbi.1002318</infon><infon key="pub-id_pmid">22215998</infon><infon key="section_type">REF</infon><infon key="source">PLoS computational biology</infon><infon key="type">ref</infon><infon key="volume">7</infon><infon key="year">2011</infon><offset>34446</offset><text>The FGGY carbohydrate kinase family: insights into the evolution of functional specificities</text></passage><passage><infon key="fpage">1643</infon><infon key="issue">3</infon><infon key="lpage">52</infon><infon key="name_0">surname:Bunker;given-names:RD</infon><infon key="name_1">surname:Bulloch;given-names:EM</infon><infon key="name_2">surname:Dickson;given-names:JM</infon><infon key="name_3">surname:Loomes;given-names:KM</infon><infon key="name_4">surname:Baker;given-names:EN</infon><infon key="pub-id_doi">10.1074/jbc.M112.427997</infon><infon key="pub-id_pmid">23179721</infon><infon key="section_type">REF</infon><infon key="source">Journal of Biological Chemistry</infon><infon key="type">ref</infon><infon key="volume">288</infon><infon key="year">2013</infon><offset>34539</offset><text>Structure and function of human xylulokinase, an enzyme with important roles in carbohydrate metabolism</text></passage><passage><infon key="fpage">261</infon><infon key="issue">1</infon><infon key="lpage">8</infon><infon key="name_0">surname:Agarwal;given-names:R</infon><infon key="name_1">surname:Burley;given-names:SK</infon><infon key="name_2">surname:Swaminathan;given-names:S</infon><infon key="pub-id_doi">10.1002/prot.23202</infon><infon key="pub-id_pmid">22072612</infon><infon key="section_type">REF</infon><infon key="source">Proteins</infon><infon key="type">ref</infon><infon key="volume">80</infon><infon key="year">2012</infon><offset>34643</offset><text>Structural insight into mechanism and diverse substrate selection strategy of L-ribulokinase</text></passage><passage><infon key="fpage">783</infon><infon key="issue">3</infon><infon key="lpage">98</infon><infon key="name_0">surname:Di Luccio;given-names:E</infon><infon key="name_1">surname:Petschacher;given-names:B</infon><infon key="name_2">surname:Voegtli;given-names:J</infon><infon key="name_3">surname:Chou;given-names:H-T</infon><infon key="name_4">surname:Stahlberg;given-names:H</infon><infon key="name_5">surname:Nidetzky;given-names:B</infon><infon key="pub-id_pmid">17123542</infon><infon key="section_type">REF</infon><infon key="source">Journal of molecular biology</infon><infon key="type">ref</infon><infon key="volume">365</infon><infon key="year">2007</infon><offset>34736</offset><text>Structural and Kinetic Studies of Induced Fit in Xylulose Kinase from Escherichia coli</text></passage><passage><infon key="fpage">978</infon><infon key="issue">5</infon><infon key="lpage">84</infon><infon key="name_0">surname:Emanuelsson;given-names:O</infon><infon key="name_1">surname:Nielsen;given-names:H</infon><infon key="name_2">surname:Von Heijne;given-names:G</infon><infon key="pub-id_pmid">10338008</infon><infon key="section_type">REF</infon><infon key="source">Protein Sci</infon><infon key="type">ref</infon><infon key="volume">8</infon><infon key="year">1999</infon><offset>34823</offset><text>ChloroP, a neural network-based method for predicting chloroplast transit peptides and their cleavage sites</text></passage><passage><infon key="fpage">441</infon><infon key="issue">2</infon><infon key="lpage">57</infon><infon key="name_0">surname:Hemmerlin;given-names:A</infon><infon key="name_1">surname:Tritsch;given-names:D</infon><infon key="name_2">surname:Hartmann;given-names:M</infon><infon key="name_3">surname:Pacaud;given-names:K</infon><infon key="name_4">surname:Hoeffler;given-names:J-F</infon><infon key="name_5">surname:van Dorsselaer;given-names:A</infon><infon key="pub-id_pmid">16920870</infon><infon key="section_type">REF</infon><infon key="source">Plant physiology</infon><infon key="type">ref</infon><infon key="volume">142</infon><infon key="year">2006</infon><offset>34931</offset><text>A cytosolic Arabidopsis D-xylulose kinase catalyzes the phosphorylation of 1-deoxy-D-xylulose into a precursor of the plastidial isoprenoid pathway</text></passage><passage><infon key="fpage">3508</infon><infon key="issue">12</infon><infon key="lpage">18</infon><infon key="name_0">surname:Bystrom;given-names:CE</infon><infon key="name_1">surname:Pettigrew;given-names:DW</infon><infon key="name_2">surname:Branchaud;given-names:BP</infon><infon key="name_3">surname:O'Brien;given-names:P</infon><infon key="name_4">surname:Remington;given-names:SJ</infon><infon key="pub-id_pmid">10090737</infon><infon key="section_type">REF</infon><infon key="source">Biochemistry</infon><infon key="type">ref</infon><infon key="volume">38</infon><infon key="year">1999</infon><offset>35079</offset><text>Crystal structures of Escherichia coli glycerol kinase variant S58→ W in complex with nonhydrolyzable ATP analogues reveal a putative active conformation of the enzyme as a result of domain motion</text></passage><passage><infon key="fpage">1407</infon><infon key="issue">11</infon><infon key="lpage">18</infon><infon key="name_0">surname:Feese;given-names:MD</infon><infon key="name_1">surname:Faber;given-names:HR</infon><infon key="name_2">surname:Bystrom;given-names:CE</infon><infon key="name_3">surname:Pettigrew;given-names:DW</infon><infon key="name_4">surname:Remington;given-names:SJ</infon><infon key="pub-id_pmid">9817843</infon><infon key="section_type">REF</infon><infon key="source">Structure</infon><infon key="type">ref</infon><infon key="volume">6</infon><infon key="year">1998</infon><offset>35278</offset><text>Glycerol kinase from Escherichia coli and an Ala65→ Thr mutant: the crystal structures reveal conformational changes with implications for allosteric regulation</text></passage><passage><infon key="fpage">787</infon><infon key="issue">3</infon><infon key="lpage">97</infon><infon key="name_0">surname:Grueninger;given-names:D</infon><infon key="name_1">surname:Schulz;given-names:GE</infon><infon key="pub-id_pmid">16674975</infon><infon key="section_type">REF</infon><infon key="source">Journal of molecular biology</infon><infon key="type">ref</infon><infon key="volume">359</infon><infon key="year">2006</infon><offset>35441</offset><text>Structure and Reaction Mechanism of l-Rhamnulose Kinase from Escherichia coli</text></passage><passage><infon key="fpage">1469</infon><infon key="issue">7</infon><infon key="lpage">82</infon><infon key="name_0">surname:Higgins;given-names:MA</infon><infon key="name_1">surname:Suits;given-names:MD</infon><infon key="name_2">surname:Marsters;given-names:C</infon><infon key="name_3">surname:Boraston;given-names:AB</infon><infon key="pub-id_doi">10.1016/j.jmb.2013.12.006</infon><infon key="pub-id_pmid">24333485</infon><infon key="section_type">REF</infon><infon key="source">Journal of molecular biology</infon><infon key="type">ref</infon><infon key="volume">426</infon><infon key="year">2014</infon><offset>35519</offset><text>Structural and Functional Analysis of Fucose-Processing Enzymes from Streptococcus pneumoniae</text></passage><passage><infon key="fpage">236</infon><infon key="issue">2</infon><infon key="lpage">45</infon><infon key="name_0">surname:Pettigrew;given-names:DW</infon><infon key="name_1">surname:Smith;given-names:GB</infon><infon key="name_2">surname:Thomas;given-names:KP</infon><infon key="name_3">surname:D'Nette;given-names:CD</infon><infon key="pub-id_pmid">9448710</infon><infon key="section_type">REF</infon><infon key="source">Archives of biochemistry and biophysics</infon><infon key="type">ref</infon><infon key="volume">349</infon><infon key="year">1998</infon><offset>35613</offset><text>Conserved active site aspartates and domain–domain interactions in regulatory properties of the sugar kinase superfamily</text></passage><passage><infon key="fpage">136</infon><infon key="issue">1</infon><infon key="lpage">47</infon><infon key="name_0">surname:Karlsson;given-names:R</infon><infon key="name_1">surname:Katsamba;given-names:PS</infon><infon key="name_2">surname:Nordin;given-names:H</infon><infon key="name_3">surname:Pol;given-names:E</infon><infon key="name_4">surname:Myszka;given-names:DG</infon><infon key="pub-id_pmid">16337141</infon><infon key="section_type">REF</infon><infon key="source">Analytical biochemistry</infon><infon key="type">ref</infon><infon key="volume">349</infon><infon key="year">2006</infon><offset>35736</offset><text>Analyzing a kinetic titration series using affinity biosensors</text></passage><passage><infon key="fpage">362</infon><infon key="issue">2</infon><infon key="lpage">73</infon><infon key="name_0">surname:Yeh;given-names:JI</infon><infon key="name_1">surname:Charrier;given-names:V</infon><infon key="name_2">surname:Paulo;given-names:J</infon><infon key="name_3">surname:Hou;given-names:L</infon><infon key="name_4">surname:Darbon;given-names:E</infon><infon key="name_5">surname:Claiborne;given-names:A</infon><infon key="pub-id_pmid">14717590</infon><infon key="section_type">REF</infon><infon key="source">Biochemistry</infon><infon key="type">ref</infon><infon key="volume">43</infon><infon key="year">2004</infon><offset>35799</offset><text>Structures of enterococcal glycerol kinase in the absence and presence of glycerol: correlation of conformation to substrate binding and a mechanism of activation by phosphorylation</text></passage><passage><infon key="fpage">137</infon><infon key="lpage">62</infon><infon key="name_0">surname:Hurley;given-names:JH</infon><infon key="pub-id_pmid">8800467</infon><infon key="section_type">REF</infon><infon key="source">Annual review of biophysics and biomolecular structure</infon><infon key="type">ref</infon><infon key="volume">25</infon><infon key="year">1996</infon><offset>35981</offset><text>The sugar kinase/heat shock protein 70/actin superfamily: implications of conserved structure for mechanism</text></passage><passage><infon key="fpage">1219</infon><infon key="issue">4</infon><infon key="lpage">27</infon><infon key="name_0">surname:Emekli;given-names:U</infon><infon key="name_1">surname:Schneidman-Duhovny;given-names:D</infon><infon key="name_2">surname:Wolfson;given-names:HJ</infon><infon key="name_3">surname:Nussinov;given-names:R</infon><infon key="name_4">surname:Haliloglu;given-names:T</infon><infon key="pub-id_pmid">17847101</infon><infon key="section_type">REF</infon><infon key="source">Proteins</infon><infon key="type">ref</infon><infon key="volume">70</infon><infon key="year">2008</infon><offset>36089</offset><text>HingeProt: automated prediction of hinges in protein structures</text></passage><passage><infon key="fpage">8</infon><infon key="issue">1</infon><infon key="lpage">15</infon><infon key="name_0">surname:Stols;given-names:L</infon><infon key="name_1">surname:Gu;given-names:M</infon><infon key="name_2">surname:Dieckman;given-names:L</infon><infon key="name_3">surname:Raffen;given-names:R</infon><infon key="name_4">surname:Collart;given-names:FR</infon><infon key="name_5">surname:Donnelly;given-names:MI</infon><infon key="pub-id_pmid">12071693</infon><infon key="section_type">REF</infon><infon key="source">Protein Expr Purif</infon><infon key="type">ref</infon><infon key="volume">25</infon><infon key="year">2002</infon><offset>36153</offset><text>A new vector for high-throughput, ligation-independent cloning encoding a tobacco etch virus protease cleavage site</text></passage><passage><infon key="fpage">307</infon><infon key="lpage">26</infon><infon key="name_0">surname:Otwinowski;given-names:Z</infon><infon key="name_1">surname:Minor;given-names:W</infon><infon key="section_type">REF</infon><infon key="source">Methods In Enzymology</infon><infon key="type">ref</infon><infon key="volume">276</infon><infon key="year">1997</infon><offset>36269</offset><text>Processing of X-ray diffraction data collected in oscillation mode</text></passage><passage><infon key="fpage">213</infon><infon key="issue">2</infon><infon key="lpage">21</infon><infon key="name_0">surname:Adams;given-names:PD</infon><infon key="name_1">surname:Afonine;given-names:PV</infon><infon key="name_2">surname:Bunkóczi;given-names:G</infon><infon key="name_3">surname:Chen;given-names:VB</infon><infon key="name_4">surname:Davis;given-names:IW</infon><infon key="name_5">surname:Echols;given-names:N</infon><infon key="pub-id_pmid">20124702</infon><infon key="section_type">REF</infon><infon key="source">Acta Crystallographica Section D: Biological Crystallography</infon><infon key="type">ref</infon><infon key="volume">66</infon><infon key="year">2010</infon><offset>36336</offset><text>PHENIX: a comprehensive Python-based system for macromolecular structure solution</text></passage><passage><infon key="fpage">2126</infon><infon key="issue">12</infon><infon key="lpage">32</infon><infon key="name_0">surname:Emsley;given-names:P</infon><infon key="name_1">surname:Cowtan;given-names:K</infon><infon key="pub-id_pmid">15572765</infon><infon key="section_type">REF</infon><infon key="source">Acta Crystallographica Section D: Biological Crystallography</infon><infon key="type">ref</infon><infon key="volume">60</infon><infon key="year">2004</infon><offset>36418</offset><text>Coot: model-building tools for molecular graphics</text></passage><passage><infon key="fpage">1194</infon><infon key="issue">11</infon><infon key="lpage">7</infon><infon key="name_0">surname:Afonine;given-names:PV</infon><infon key="name_1">surname:Grosse-Kunstleve;given-names:RW</infon><infon key="name_2">surname:Adams;given-names:PD</infon><infon key="name_3">surname:Lunin;given-names:VY</infon><infon key="name_4">surname:Urzhumtsev;given-names:A</infon><infon key="pub-id_pmid">18007035</infon><infon key="section_type">REF</infon><infon key="source">Acta Crystallographica Section D: Biological Crystallography</infon><infon key="type">ref</infon><infon key="volume">63</infon><infon key="year">2007</infon><offset>36468</offset><text>On macromolecular refinement at subatomic resolution with interatomic scatterers</text></passage><passage><infon key="fpage">283</infon><infon key="issue">2</infon><infon key="lpage">91</infon><infon key="name_0">surname:Laskowski;given-names:RA</infon><infon key="name_1">surname:MacArthur;given-names:MW</infon><infon key="name_2">surname:Moss;given-names:DS</infon><infon key="name_3">surname:Thornton;given-names:JM</infon><infon key="section_type">REF</infon><infon key="source">Journal of applied crystallography</infon><infon key="type">ref</infon><infon key="volume">26</infon><infon key="year">1993</infon><offset>36549</offset><text>PROCHECK: a program to check the stereochemical quality of protein structures</text></passage><passage><infon key="section_type">REF</infon><infon key="type">ref</infon><offset>36627</offset><text>DeLano. W. The PyMOL Molecular Graphics System. Available: http://www.pymol.org.</text></passage><passage><infon key="fpage">615</infon><infon key="issue">6</infon><infon key="lpage">22</infon><infon key="name_0">surname:Sanghera;given-names:J</infon><infon key="name_1">surname:Li;given-names:R</infon><infon key="name_2">surname:Yan;given-names:J</infon><infon key="pub-id_doi">10.1089/adt.2009.0237</infon><infon key="pub-id_pmid">20105027</infon><infon key="section_type">REF</infon><infon key="source">Assay and drug development technologies</infon><infon key="type">ref</infon><infon key="volume">7</infon><infon key="year">2009</infon><offset>36708</offset><text>Comparison of the luminescent ADP-Glo assay to a standard radiometric assay for measurement of protein kinase activity</text></passage></document></collection>
|