Datasets:

TigerResearch

/

tigerbot-youtube-howto-en-50k

like 1

Follow

Tiger Research 69

Please explain how to get unlimited smithing supplies (free)

okay hey guys this is going to be a tutorial on how to get free smithing supplies in Skyrim and now you want to go to Whiterun to do this and yeah so as soon as you walk in the gate before it run you want to just walk forward and then take the first left and it should take you up these stairs and then you see this house on the on your left you just want to walk around it and keep going just cross this uh this Craig thing here just go up the ramp and then just go to the end and then at the end there won't be anything here to do really except you want to jump on this roof and you just want to basically keep mashing jump until you get up to the top I get and now once you're on the top on this pole you probably want to keep saving this so yeah so H new point you get to you probably just want to save it now you want to get on top of these two you like dragon heads so I'm trying not to like over jump them yeah okay now when you get on top of these College save it again and you want to jump onto onto this bit here so that be it right there just shut it run and jump and then you just feel like flooding on sin here I mean you can see that there you just be floating and then once again save it you want to come across here and you want to jump right into this it can be kind of annoying this is a big part where you want to say because it can not shoot you off to the side so yeah I'm gonna say let me get it ah okay you can say then it showed me off to the side and actually show me through which can be a bit annoying so if that happens just let you save and then effort to load again and you just want to keep trying this until you get through and then you base are here at the way and you just be under here and you want to walk under the wall you just want to walk across a few and just basically keep going around the wall and it might be like badly textured that's because this part isn't actually meant to be like rendered yet because it's two things for inside so if I go up to this gate and it says open skyrim so if we were outside and the game newer outside I'd say into what run you just want to keep walking around here I'm trying to following any ditches or anything because sometimes you can get stuck and can't get out so yeah much like this ditch here sometimes your phone certain spotting that you just like can't get out and I don't think it's too much further by the way you're going to get these smithing supplies from Skyforge if you know what Skaar forges then it's the what they called for fatherhood companions it see our companions forge every building in what run collected few of us have uh no I can't set via the of a building in what run then you can go to their missions and then after you do is send them out of their missions you actually get to become a werewolf if you want which is pretty cool I'll do it to terror on that if people want it I'm not sure of of calm process already think I'm I have I got no Ivan Ivan again so it does take a while to get around here but once you get here you want to walk up and this will probably look like you can't walk on it because it would just be nothing Navi can get onto here and then that's forget to fail yeah okay and then just jump on this top bit up here and then just drops or this rock it's right in front of you and then walk here you'll be able to walk on here makes it easier you can just run and jump and try and grab the chest which I just found out you can just jump and then open it and then you can get all this stuff for free and then you can go sell it as iron silver armor and weapons and stuff it's fair bit in here so you can take whatever you want I don't really want any of this cuz I've already really got everything I want it yeah just take all the stuff you want take it all whatever and then you want to walk towards these um these targets you just want to jump up and then you weigh out and you'll be back in what room and then you can go so your stuff you can just sell to discard up here if you want just raise all this stuff to him and and yeah you can oh the try to spray stock ups of two days so you can buy two days and do it again and you can just do it as many times if you actually want so yeah and then I can sell all the stuff I just bought one of that buy not hacked yeah so I just stole these and so these and you can just sew whatever and yeah and that's pretty much it and yeah like I said you can wipe to Dyson and do it again and again and again you know basically how many times you want and and yeah I will also be doing a thorough soon on how to get like unlimited dyed your hearts so thumbs up you can want to say that I'll just come in or whatever um so that was how to get freaks making supplies and Otis grows Skyrim if you liked this place thumbs it up or or if it helped you and yeah leave a comment if you want to say to taro on something else and yeah

Please explain how to easily start an echo srm 225 weed eater

okay how to start an echo weedeater first thing you want to do is make sure you have string make sure you have string and I'll have I'll make a video of how to put that string in there it's not too difficult second thing you want to do is make sure there's jacks there's fuel make sure there's fuel in here it is right there next thing and push this prom button until you feel resistance and it's primed next thing you want to do just flip this up it's open it means the maximum amount of fuel is going to enter the combustion chamber and then so I'm going to pull it about four or five times before that flip that on up hold that in while pull this four five six four to six times until it runs and once it runs you're going to flip this to the middle and then do it couple of times and it work here we go all right yeah it wanted to start now I flip it to middle it chokes off the fuel that checks out the fuel to the the combustion chamber it doesn't need as much fuel and air anymore so now one or two pool started in the garbage a button-pushing to stop it and that's how you start an echo SRM - two to five weedeater thank you

Please explain how to change co2 tank for fountain machine

hello in this video i'm going to show you how to change co2 tank for the fountain machine now customer comes in and complains that hey the drinks are flat what do you do well you take this you go in the back wherever the cylinder is the first thing you want to do is you want to look at the gauge when when it's on green it will show you that it's full when it's on red well it's time to change the you know the co2 tank also you'll be able to lift it up like this is heavy i can't well i can lift it up but it's pretty heavy when the tank is empty you'll know that it's empty safety come first anytime you change it you'll see these button will say open and close make sure you turn off your uh you cut it off before you before you do anything with it okay she's turning it off all right so we got it off and what you do is you always have this little special wrench that comes with it you're gonna unscrew that now before you do that just make sure you have a new tank right there in the back and the new tank will have a close like a little red valve you've already heard that and see when she's unscrewing that the gauge then down all the way to the red because she was unscrewing that all right what you're gonna do is you're gonna take your empty tank bring out a new tank the new tank will have like a little closed valve on it and it's going to be heavy then you know that's a good tank you basically take the valve out then you basically make sure it's on closed position otherwise it's going to scare the heck out of you all right you're going to screw it in there and when you see that it's enough then you're gonna use that wrench to tighten it up it's very important you tighten it up good and tight you don't want to go super crazy but you want to make sure that you do good and tight all right and watch and see i'm going to turn on the pressure there you go i just turned it on and you see the pressure just went up and you're going to turn it you're going to open it up all the way until it stops and see pressure went up all the way that's it and anytime you change co2 tank you must must must go to the drink machine choose any flavor it doesn't matter and run it for about a minute till the motor till the pump kicks in it's very important for the pump and you're gonna have to listen to it closely so the pump can kick in and when pump pump kicks in run it for another five ten seconds then it's gonna come out just fine if you have any more questions ask somebody at the store or ask your store manager

Please explain how to make plush: needle sculpting plushie faces

oh this is Laura from teacup lion and I'm going to show you how to needle sculpture plush to create definition in the face or any other areas that you want to change so as you can see this is a bull terrier and his face is a little puffy Rio Bull Terriers do have a somewhat puffy snout but their eyes should sink in slightly it gives a much cuter look it's more natural and it looks less like overstuffed taxidermy so what I want to start with is a four to five inch tall needle for this pattern and how you can guess the length is how far it will go through the head so I can maybe get away with one inch shorter needle than the head but I might be kind of guessing where this edge will be coming out and I don't want to stab myself so I'm just gonna go with a 45 inch I have my upholstery thread or heavy-duty thread because there's gonna be a lot of tension on this thread and you don't want these threads coming out if you're using regular sewing thread it can snap it at any time so I'd normally pick white but I'm picking black so you can see it you want to start your threads somewhere on the back of the flesh where the knot will not be too noticeable it could be behind an ear I usually like to go in the back center of the neck because it creates a nice definition there too and at least I know that the thread will be running across the face and back not up in this area and down so start preferably not right in the center of the seam in case the knot will pop through I'm stitching right into the center into the fabric and I am aiming to come out at the center eyeball here now this is sort of a trial and error thing I do have the backs of the eye attached so I can't get quite exactly next to the eye but I can get really close and that's why having white will help for white fabric so pull it through make sure to even these threads out at the back and pull making sure that not secure okay so the next stitch if you sew downwards just take note of how it will push the fabric the eye will look a bit down you stitch up a little bit I'm just pressing into the fabric it goes up I like that so I'm going to stitch this is about three to four millimeters up right next to the eyeball now I'm hitting the backing with the needle so I'm moving it slightly to the left and stitching watch your fingers all right stitch down at the back of the head but it's not where I want it to be so I'm going to keep trying to guess where the bottom is all righty got it so if you need pliers grab those I have enough force here that I can just pull it through make sure these two threats come down equally and they do so watch as I pull the thread I sinks in when I release the thread it comes out again so whatever depth you like it at you will want to pull it trim your threads and double knot them together now the first i's easier the second is usually a bit harder because you're trying to match the first dye look at that it's pretty cute on this side so I'm just gonna repeat for this eyeball as well now you can also use this to create definition in other areas of the face maybe I'm making a pug and I want him to have little wrinkles across his face and I want the nose to be more pronounced here you can see it's only a little bit pronounced maybe I want a shape to be more like that so I will wait fabric I'd use white again just so you can see it start on this side and might be a good idea if you're new to this to draw the lion where you'd want it to be maybe between these two dots those look pretty symmetrical press it into test yeah that seems good and try to stitch out at one of the dots perfect let's tape and at this side and out at the back come on all right good enough for this video make sure to pull threads down evenly Oh snout how nice so with white thread you wouldn't see it as much then you can always brush the little fur fibers over the threads so it's not as noticeable and that's how you needle sculpt you can use it on other areas as well of the plush to create definition wherever you liked thanks for watching and I hope this helps you take your sewing to the next level bye

Please explain how to play drums : drum practice routines, exercises & techniques

Hi! My name is Frank, and in this clip we’re looking at playing with a practice pad, and using a mirror, obviously. What we want to use when we’re practicing on the drum set all the time—there are many different variations, but it’s just a simple idea—a metronome, something to keep a steady tempo. I do this for my students all the time, but I can’t be there all the time, and so they want to get used to practicing with a metronome. With all styles, and almost all music, the drummer’s number one job is holding a steady tempo: not going faster, not going slower, but the tempo you start at is the tempo you stay at, no matter what you play. Unless the music dictates otherwise, you hold that pattern rock solid. Practicing with a metronome and a practice pad, that’s the stuff that really forces you to internalize that metronome sound, you can feel…….that feel, that grove, that rock solid repetitious…..sound. So we want to be able to make those sticks do what we want them to do. Make the sticks your slave; don’t allow the sticks to tell you what to do on the drum set or on the practice pad. And even though there’s only one clip on Expert Village about the practice pad, I spend a lot of time on the practice pad. It’s very easy to transfer from the practice pad to the drum set because your wrists and your fingers are doing the same thing on all the other instruments. If you can do that, you can go around the kit doing the other things; but if you can do it on a practice pad, you can play it on a kit: it’s just a matter of moving your hands to each different instrument. So let’s take a look at what it is to practice with a metronome…it’s just giving me a steady beat, and there so many exercises to play, this book stick control is a foundationally strong instrument—I use it for my feet too. Just eight strokes per hand, and I’m having to think about lining those up with those beats. Practice on the metronome with all the grips—French, German and American—with all the techniques and all the exercises, and then go apply it to the drum set. It surprises me how little some drummers practice, when I know that there so much to practice, there so many areas to improve. I encourage you to take a listen, listen to a lot of music; but probably more importantly, practice a lot and listen to yourself, find your sound. The metronome forces you to think about that internal pulse. The mirror is a fantastic tool, because now you see what the audience sees. So you can work on technique from here, looking down on your hands, and then you see a totally different picture, and you’ll learn so much. If you’ve ever bought an instructional video, or seen another one like online, like you’re seeing now, now you get to see what those other people are seeing out of you. How’s your technique? How’s your facial expressions? How’s your posture? How’s your drum height? All of this stuff will reveal. Am I playing too hard? Am I working too hard to get the sound out of the instrument? Am I not working hard enough? It’s amazing how different things are from the front; use mirrors, use metronomes and practice with practice pads.

Please explain how to make a top hat. here are instructions

hi guys it's eileen here and today i am going to show you how to construct a top hat and here is my first attempt here um i made a pattern um because you have to either buy a pattern online or print it up and i'm not sure because i just haven't been able to get a pattern um so i'm looking around online anyways and it's you have to purchase them so far if i looked but i kind of give up after five tries of looking because i'm not going to keep all day looking so i just made up my own pattern and i think this is going to work for our challenge so this is it this is my first one it's a teeny crooked but it doesn't matter because it's kind of like you know a um you know artsy imagination type of fun thing so here is my instructions so i'm hoping that this will work for the instructions so the round part here of the top hat measures right from one end to the circle to the next circle and five and a half inches about um i say about because when you buy time you make your little marker mark it might be a little hair bigger and whatever but it's about that so it's five and a half inches circle so i just found five and a half inch circle of uh like a basket and did that i found my um perfect measurement that i did had a few other ones is three inches this circle here on the inside i found that i had to measure one 1 16 inch in a boat to make the nice trim around or whatever this part of the hat is called and this part of the hat right here that goes up here the height is five inches tall now the length of the roll is 11 inches and that is a full um regular sheet of um card stock so i would cut the card stock measure it five and a half inches this way and my ruler has decided to play hide and seek all right found it so it'd be five and a half inches or five sorry not five and half five inches um in move my coffee over here measure from here and that's how tall your hat is so this you guys can do your own measurements but i'm just giving you you know a quick pattern of what i have done so you know to make it easy because then you're not looking for a pattern i just found that really a pain to be honest with you so five inches and then i just cut off my scrap which is right here now on one end i would measure about an inch and it gives you an estimate because it's just about because one end of my hat went in an inch more if you can see this is an angle this line here i don't know if you can notice that on the thing and then the other end of my was glued just on the edge so then it had a little bit of a more open um slightly out the top hat comes slightly out you can do more drastic if you had bigger paper i suppose but this is what i could do with the 11 inches of paper so them we just oops i'm guess i'm having it on the wrong way not one inch that way so about an inch this way it actually could be a little bit more um but i'm just giving you an estimate on how much so this end here will go to about your inch you can make it a little bit more if you want it more dramatic and then this end here would go to your very edge of your paper so it overlapped like that then you have your bottom smaller pool you can make it a little smaller because your your circle will be a tad more than anything and then the top then you don't worry about like it's going to be a little uneven but you kind of fix that up after you glue it and that gives you the co more of a cone shape for your top hat let's just do that here so i'm using my tacky glue and that's just like that you can used clothes pins or whatever to pin it together i've also used um on my hat i also on the inside used washi tape to hold it down tack it down so so then you can kind of work on something else and not be tacking or keep continuously rubbing on that and trying to pin it down keep it down but also when if it does on top like pop up a bit the outside will pop up a bit but just gotta keep rubbing it that's why you put it down and just rub it and then it should stay you can add a little bit more glue up the reason why mine is popping up because i don't have enough glue right to the end here and there you go so your mark here should go your one that you cinch in should go to the bottom of your hat now this part of the circle i have this cut out this is because it's my tracer when you trace over this part and you have your outer circle and your inner circle you're not going to cut out your inner circle that was just for my tracer that i have it cut out your inner circle you're going to make tons of pie shapes on pieces so you're gonna make them all across and then you're gonna use your cutting board to cut them as little triangle pieces and you're gonna continue to build that up these pie pieces then when you do cut it with an x-acto knife and it'll be more pieces than this like this example right here do i have it somewhat like that so then you can paste you put your tacky glue on these triangles and they go inside your cylinder and they paste on the inside of your cylinder so but like i said for the tracer reasons if you want to make a tracer and have it all the time because you you may be making more for this challenge i have something with this hat every day you can either use the same hat and add on or make several hats i'm planning on making several hats just so that i can play with the look and stuff so then you would take your x-acto knife and then you would cut with your ruler is the best if you have a metal rule or two along there on each little pie strip getting this as a result and then again you put the glue on the outside of these triangles set that in you paste them in um and then you just keep rubbing it just keep rubbing the glue be patient pushing it up and pushing it doesn't matter if this top hat end gets pulled up because that's how i did my um you can see probably the triangle pieces and i just kept pushing it up pushing it up this can get shaped after then you cut your circle for the top and what measurement did i use for that okay i noticed i had to readjust my hat because i was talking so much that i was not really paying attention so i had to tear it up a bit to unstick it because you want this circle you look down on your circle and you want it to be about the same size a circle it's a little more than an inch and a half but depending on your size this one actually is almost a two inch overlap on the bottom so but depending on the size yeah so it's about just i'd say an inch and a half actually and then it's going to be off here um and really crooked looking but you can cut that down after and now like i said i did kind of make a oops a bit of a mess on this now because i had to tear it but it's gonna be good so anyways i cinched it in i apologize for that it should be an inch an inch and a half to two inches if you want that more of a cone look and of course i keep putting that the tops gotta go of right to the meeting the ends there so yeah i did that i was talking so much and then i didn't realize that i totally had that off but it's okay so then you kind of have your top hat like that you'll want to flatten out your edges then i kind of just go around and cut it straight so it's more even just like that now it could be like it may be on the slant and then you just got kind of um figure that one out so then it goes more even but if it's not perfect that's okay so it's more straight of course i think i'm gonna get it right or am i not just because i'm videoing all right it gives you lots of leeway because it's five inches long so it gives you lots of neat leeway to mess it up or to fix it up if you mess up so that's pretty good now i'm gonna cut these just like i said with my exacto knife or whatever this is called this knife here cracking knife so i'm going to cut this up and keep them on because i need the flaps to glue to the other to the wall of the hat the top hat so there we go now we have all these cut bend them forward they're going to go on the inside of a cone part of your top sorry um to make my joints nice and strong after i've joined everything together with tacky glue i did use mod podge on this one to make it all nice and hard inside and outside on this just to seal everything up so that worked really well for me so you have your hat goes over good you put your glue on here and my glue is getting low so i'm gonna have to grab my bottle so very prepared i refill my little bottle all the time so and the tacit glue really works good you can use hot glue and that kind of stuff too i imagine but um i would think that you know you might have more of a lumpy result so now you can see when i put it in it's like this i just push start pushing my top in and around just like that if it's crooked it's okay because this is supposed to be a whimsical project like um mad hatter or you know steampunk that kind of thing you know so and just be patient with it keep going around and around the tacky glue will tack really well i like to make sure my edges are snug just like that so that's how it's working it's looking good and you just keep going over it tacky glue and keep pushing it's gonna it's gonna set and there we go you can see the um i have the tape still in there you can see the edges glued down and you can seal them perfectly later on with some mod podge just painting it right in there okay so that's that part of the hat next so the next part of the hat is the top so top is going to measure about three and a half inches give or take so i'm gonna do a little hmm actually a little over three and a half inches so we'll see if this circle i might cut it too small on my marker mark actually so this circle might be this is actually a little tad smaller than three and a half inches but it should be about three and a half because it's good to have a little bit bigger for the paper there that one's three and a half and this one i think i cut below the marker line and that one you just tack your glue around i'm actually going to use the circle and cut it out one more time because i don't want marker on my so this is a three and a half inch circle this one i cut i guess a little smaller because i cut past the marker or on the marker making it a tad small see when you're drawing a circle and then you're cutting it sometimes you cut you cut your circle tag smaller if you're cutting it right on the line or whatever and i was cutting it kind of more on the inside of the line anyway there's my three and a half inch circle perfect see i did cut it wrong but i knew it was three and a half inches so what i did was this one's gonna happen i put tacky glue all around and in fact i'm gonna move my self-adhesive board my outer edge of my circle i'm sure you can like make it longer and have flaps or whatever but this is the way i did it and i'm happy with the results so so that is my circle i put my top hat over top because it's at this point you gotta look inside and shape your top hat and that kind of thing and remember that it could be a little bit um uneven because you made it that cone shape so but that's okay because this is like i said whimsical hat and then i just push pressure on the edges and anything that's sticking up and just push in just slightly to that tacky glue and rub it all the way around be patient there is going to be a little bit of a lip but you gave room for movement because you made it a little bit bigger so you could flip it down um use a tool to push your edges out that you want out a bit once it dries enough intact enough you can do that but not solidly dry but and then you just put pressure all the way around this one's the lip is coming out there we go and there we go you can probably see that it comes around a little bit more on there but like i said it doesn't have to be um totally straight once this is really dry you can go around with your scissors and do the edges like that around i i go from underneath and just go around like this but i'd wait till it's totally dry and there's no more that you adjusting that you want to do and then do that so here's your hat i would suggest to keep your side to the side you curl up your edges a bit i took a dowel and i just went along the dowel curled up my edges a bit you can do this in any color card stock if you don't wish to paint it um i was just doing it with the cream because these are i don't know i don't know exactly what i want to do paint it you can cover it um treat it like a journal page you know you could totally cover it and yeah so now you have the top hat so i hope that was okay for a tutorial on how to make your pattern um yeah thanks guys for watching and keep an eye out for all the challenges because the challenges are going to be adding things to this so yeah you can just make more hats practice or make your hat totally decorate it for the first day and then the next day make another hat and totally do what i asked you on the challenge was adding something so yeah okay i hope you like it talk to you later bye bye

Please explain how to remove rust from car, truck, or classic car 65 mustang

everybody stoned here here's that 65 Mustang going to be doing right now on the dr. X Russ test here we go spray it all right now watch it this is paint this rust off this car now when it's hot outside like this it's a good idea you have it to shave we're just doing this so you can see it live as you see right now it's actually coming off the car watch it as you notice it's all the peat over here it will not harm paint glass plastics rubbery like that let's sit under no problem or anything you can basically any part of your car not worry about destroying your paint that fender this rust has been on here for about two and a half years sitting outside so it's pretty normal and the guys that loan me the car from a body shop they have to take a grinder and grind all this material down takes hours and hours and hours to grind and sometimes you very much and burn a hole through the middle doc your action will have to do any of that spray it on will do all the work for you matter Mitch you can see right now clean and skiddy will be like Brandon but that's up for a minute now we'll continue to do the hood watch me spray the dr. Exxon going to clean this hood you notice here's patency okay here will not harm the paint watch how fast eat this rest up so save you so much time and money I just bring this on no labor no brining of sandpaper and discs nothing you posit yeah what's that rush just roll right off nothing in the world will do this folks nothing only dr. X now if you notice you look right here this is paint will not touch paint only takes off the rust this is all paint up here will not touch the paint just rust only my folks stone here I'm going to clean this car now the 65 must've seen was all rusted up and you'll push your wash job on it it makes a lot faster a lot easier to do I'll bring it out here you can see where they give you the pours the rest is just going right out it just speeds up your process a little bit more tell the old king was blown off right now defender for the car good job with that you heard anything still training nice that Senator live agencies in the factory as we continue now with the finish up of the the final scuff on never to come back with another shot of dr. X finalized a little bit of Rusty's hip stuff is in there like we go hi everybody we're gonna be doing a little scotch-brite quickie on this just on top of the little rough spots right here it just speeds up a little bit more makes a leisure a little faster paced a bunch of time on just lightly scrub it to dr. X on it if I laugh to the pit out of there that's pretty much it right she's done it's like a round of power-washing here we go where you are let's catch bite this hood real fast sometimes middle gets really pitted takes a little extra longer if you disguise Fred makes a little quicker faster here we go a final process we're going to do with the dr. X's you shoot the last cone on the car if you're all done cleaning it just get it on there lifts it on there just like that just keep it light coat second process is the rust neutralizer you just spray that on that becomes a bottle of course spring all over the hood so far pretty good put on nice and heavy stops the rust from coming back and after you're done with this the third process we're going back with our sealer so dr. x-metal sealer just square it on let's sit there so pretty good eg let it sit for two to three minutes on top of the metal a chance to go in and seal that metal up real good what this does it'll cut the metal and keep it from coming back and quoting and all you just go back wash it off because water-soluble you've been going to do your body work and the primer or whatever you need to do on she's ready for paint I put quite a bit on some of the metal absorbs it that's pretty much it sit go back with a air chuck and blow it off with some air and you're done

Please explain how to slice highlights// chunky blond weave tutorial

at April hair 101 and I'm going to show you how to do a chunky blonde weave today and she wants to have really big defined chunks between the natural color that she has now on the blonde so we're gonna have some fun with that and I want to let you guys know that we just finished our music video parody to teach me how to dougie but it's teaching me how to cut it and I want you guys to go and check that out so we're putting a link right here so that you guys can watch it and hopefully put the smile on your face and inspires you to learn how to cut some hair and share it with all of your friends and let me know how you guys like it if you guys want to see more videos like that then you have to share it and you have to make sure you comment and give it a thumbs up so that I know that you like it umm so let's get started I'm going to Park her hair I'm going to do she does a really far side part two on the right so I'm gonna make sure that I part a little bit below that like a half of an inch below that and on this side also I'm gonna part right there so I'm kind of shifting a mohawk section just over her part so that when I do this stripes there's a little bit on both side of her part so that she doesn't have one side that's all stripy on the other side that's a solid color because that is not what I want to do that's why that's why I'm saying to do that okay so I'm doing kind of a round shape on this section on the top of her head you want to be able to fit a foil without having too much of the ends lifting up so it needs to be kind of on the thinner side so that the foils can lay more flat and that way you keep the the color closer to the scalp okay so here's my partying oars my section and I'm going to clip this off clip it up tight and now I have this underneath I'm just going to part right below her ears so I just went right below the ears and parted this up and we're going to leave all of this underneath here dark but we want to be able to kind of protect it and here's another thing she is kind of indecisive on whether or not she wants to go a little bit more blonde later on this summer so we're not putting any more color into her hair you could also go in and do like a really deep brown with this so that it was a really contrasting colors you could do a brown and a blonde but we're just gonna try to leave as much of her natural color in as we can so that because we've noticed she likes to change her hair a lot so the less we do the less we do to her hair the better because when she changes that the next time she won't have as much damage I mixed up the for me C D color cream with a 30 volume because she wants a really light and then I'm just gonna put some conditioner in the ball and I'm going to use this instead of ooh I just squirt it on the floor instead of a brown color because it will protect the hair from getting bleach on it and it will keep the hair kind of smooth down so back here just to keep all this hair out of the way I'm just going to smooth the conditioner on just at the roots because the ends should be protected from the foils and that's going to keep all of this down and I'm even gonna stick a foil on top of it and it's just gonna help me keep all my sectioning really clean so that this line doesn't get a bunch of bleeding into end stuff so now that conditioner is holding it on sticking it on nice and tight and then the clip just holds it to the hair so now we can let down this middle section and I'm going to be taking vertical sections throughout her hair and we're going to go all the way around and I'm gonna do three thin slices of the blonde and then leave about a half of an inch to an inch of the brown left out with just a little bit of conditioner on that we're going to work all the way around from this side of her head all the way to the other side okay so just tilt her head a little bit away do you want the blonde be closest to your face or you want to keep it Brown I would say keep it brown I shouldn't even asked you just kidding okay the reason why I think we should keep this brown up by the front of the face is when she sticks it in a ponytail this Brown will cover up the line of the blonde and it will make it blend a little bit better so I'm leaving just that front section brown and you can stick a little bit of the conditioner on there just to protect it and keep the line really clean and then I am going to work forward so now that conditioners there like the foil will really stick to it nice and I'm taking full slices so a slice is the entire little section of hair it only needs to be like an eighth of an inch to a fourth would be the most but I would do an eighth of an inch thick and then you're gonna take your foils and I just make a little crease and stick my comb in and then I push it right against where the conditioner is and make it nice and tight and then you're gonna take the lightener and you're gonna cover the entire piece of the hair and you're going to do three of these little slices in a row and you need to work quick and also the reason why we're doing it thinner is because because we want to make sure that the hair is very saturated if you don't saturate the lightener through the entire section of hair then you will end up getting hot spots and someone would ask me about that and that is why you're getting hot spots it's a little circle down in here that didn't get processed and it's a little like a blob of color left in the hair and it looks kind of like a polka dot and we don't want post it off trust me so I'm going to do three of these really thin slices in a row [Applause] if you want a little bit thicker sections and you can take four and if you want a little bit thinner then you could do two but I would definitely do at least 2 to get the chunking effect because one would be you could do one but it would be very very subtle which could be very pretty too but if for this specific look we're doing a chunkier look okay so we have the three foils you can see it they're going to be a chunk about this thick and now we're going to take an equal sized chunk out and just a little stuck behind here there we go and just pull that forward and put the conditioner on it and that's going to help the next set of blonde the coils stick to it and it kind of keeps it up and out of the way so it keeps it really clean and if it was the brown you would just be you could take that whole section and just paint it brown all in one foil just make sure you get both sides if you were trying to do a brown and blonde chunk you need to be careful not to squish your foils because it will push the bleach the lightener and will push it back out of the soil onto the scalp and you don't want to do that so just make sure you're using gentle folds when you're folding it up and that you're not squishing the main part of the packet with all the color in it and if you're worried about it getting both sides you can roll it up and then down and that will kind of roll the hair shaft back and forth and get it completely coated and if a little bit of conditioner gets on it's okay the bleach will still it should stop you through it that sounds scary bleach eating through your hair scary actually if you need to go back and count then it's really easy if you were doing all of them foiled it would be easy to you just have to lift it up a little bit you could see the roots what ones or brown ones are blonde I'm going to show you another technique you can just leave the boils open like this if you want and this is really fast it takes a little bit more coils sometimes but you just lay them on top of each other and you take up your three sections you have to keep a little bit better track of your count with this because it's not as easy to pull up foils up and count on me well I guess counting is easy this is fine too and so you just keep stacking the foils on this is my last light one and this is really fun and this works great with long hair because you don't have to fold the foil you don't to waste that time folding the foil and then on the top this will be the conditioner section so you take the big one and then you just condition that all the way over same idea just kind of keeping it up and then the foil will stick to that and then you will just grab now over here this is a thicker section because I put the Mohawk section tilted to her part so keep that in mind that we're gonna have a little bit more hair that we're dealing with on this side if you've done it like that you can do it right down the middle if they don't part on the side like that and it would be more even but for her we're gonna have more hair over here she has some pink that she did in here a little bit ago and in the blonde sections I'm just going over it and hoping that it doesn't melt out because she wants to kind of get rid of some of it didn't sound good but I'm leaving the pink out in the brown and maybe we'll just recolor that oh that's going to be a lot lovely okay so now see this is where it can get confusing you gotta count how many oh here we go so we've done one two that's my third so we're gonna go on the conditioner one again and this is where the majority of her pink is anyway so we're gonna have a big brown chunk here big brown and pink junk so I can retouch this pink later on and brighten it up if she wants to keep it because we're not doing the brown if you were coloring the brown and this situation came up I would just put the brown color right over it and it would have a little bit of a pink undertone but the brown would make it blend so you wouldn't really be able to know that that at all I'm putting the bleach on the pink but because it's already been bleached out it should lift out pretty fast if it's not completely stained on there so I'm gonna have to go back through and check these long pieces after we get the color on and just take out the bleach off of the pink area so that doesn't get gummy and over-processed so that's kind of a little bit of a problem area that she doesn't want it anymore so we do need to take it out and you can see it's already lightening up this is what it was before so I'm just gonna keep a good eye on that as we work and check on it every couple minutes and I'll probably have to spray bottle those few little foils out just in the pink section or something we'll see how happens it's a little bit pink but I'm going to go ahead right here and just pick out the roots are okay cuz that means to be lying in tomorrow but just pick out the part that had the pink on it that's lightened now and I'm gonna put this on a towel and spray just this piece out just to save this hair because otherwise it will melt off I can promise you that and if you have a spray that has oh there's one I think Paul Mitchell makes it it's like no h2o2 and it takes kind of like neutralizes the action of the bleach but I'm gonna take this and just to protect it I'm gonna fold it out of the bleach and it's been sprayed off so that's what we're gonna do with anything that was bleached previously that cuz remember my rule you guys bleach it once it's blond bleach it twice it's gone I promise you this was lightened so light to that pale pale pale white color if we were not doing this it would turn into like bubblegum and just melt off just this little piece and that wouldn't be the end of the world because she has a lot of hair and she probably would not even notice but if you are aware of it you should try to save the hair because it's annoying to have this short little funky piece and your hair okay so now you can see the difference between these two techniques of the folding the foils and I think it looks really pretty to have them all nice and tight and you can move them a little bit this is a little bit more messy and it will drip a little bit you can take all the ends and just fold them over and you can even tilt the bottom of it up just to keep the color from running down because bleaches tend to swell and run a little bit especially when they start to get warm from the heat of the head so I'm just gonna fold it up and fold it back it's not as pretty that way but it was faster you notice that that side was a little bit faster now we're gonna move to the top we will be slicing the top also and right by her face I'm just going to take 1/4 of an inch and leave that out it's not going to be as big of a chunk as the sides where we did like a half of an because I want her to fill more blonde sorry oh how to use my phone there we go YouTube's blowing up from the hair video that teach me how to cut it you guys better go watch it like ten times memorize all the words so I wrote what a funny story when I was in beauty school the first time someone wanted chunks like this I thought that it was just a really thick leave and I didn't realize that it was actually just taking an entire slice they were like oh yeah I just sliced the hair the teacher was like yeah just slice it and I was like okay I'll slice it I didn't know what that meant like I got the hair out and I was like junk junk junk whatever that means um come to find out that slice is just the entire section goes in the foil and the entire section gets colored and I really don't know why that didn't click but it didn't and then I've never forgotten Elson cuz the girl was like my hair does not look stripy I wanted it kind of chunky and here's the thing if you do too many slices in a row it does look very stripy and I'm not a huge fan of that so I usually do on the top I'll do like the sides it's okay if those are straight because they're like this way and the hair is falling this way but on the top you have the part and it splits open and you will see these candy cane stripes if you do all of the foils a perfect slice like this and if they want that then that's cool but I think it's good to make it really different on the top and have a lot of variety so I'll do a thicker chunk and then I'll do a little bit of the natural left out and then I'll come back in here and this one will just be a really chunky weave so I'll just take like half like three big chunks maybe you leave out too Brown pieces and that will break up that line so it's not so stripy and then I'll yeah I'll tell you when I get to it so I think I did tooth boils I left out some brown then I did two foils of blonde then I left out like 1/4 of an inch of brown again and then I did a chunky blonde and then I'll leave a teeny bit like 1/4 of an inch of the brown again and then do another chunk like a 2 or 3 foil probably even a 3 foil this time to make it a really big chunk back here and I need more color I'm doing the same thing on top just layering I did the first few folded cuz I wanted to keep them away from her face as she could see but now she still can't see because I have all the hair in her face there we go it's always nice to let your clients use their eyes while they're getting their hair done by moving the hair and the foils away from their face so you can see them and talk to them even though we're not talking right now but you know you know what I mean this is gonna be a conditioner I better take some more because that was kind of thin for conditioner there we go so this is my nice that makes me feel really old cuz she's like a woman and she was just telling me that she was celebrating her seventh anniversary and she it's the seventh anniversary of her liver transplant she was born with a crappy liver right did not work right and so it's been seven years how are you doing I'm doing great still good yeah how many times have you been in rejection what she's doing really good right now so we were very happy and yeah there you go that's we were talking about so we've been doing this for 40 minutes now and we are just about to finish and it would probably have taken a little bit longer if you did the brown instead of the conditioner so yeah I'm not bragging I'm not like saying I'm the fastest in the world but that's just kind of give you an idea of how long the first foils have been on and if you feel like you were a slow with this then you're worried about the foils that we first started on right here processing a little bit too fast you can do 10 volume lower on the developer when you first start out and I'm gonna leave all of this brown this whole chunk we're done so we're gonna let this process I'm gonna stick her under the dryer because like I said this side over here has been on for 40 minutes I want to hurry and speed this up on the top and the side and just get it done as fast as we can I've gone through and sprayed out the the pink sections that were bleached out a little bit more there's still a little teeny tinge pink but that's better than gone so it'll be fine and we're gonna retouch the pink later on that's left out into the brown so I'm gonna stick her under the dryer so she processed under the dryer for 15 minutes with the meat and we are now ready to rinse it out and I think I'm gonna do a toner - I can come into town with a 9 do you want to be like a platinum a blonde or do you want to do like a like silvery blond to do the titanium or we could do let's do the titanium we're going to tone it with the 90 in the red can shades eq so we're doing one ounce of the 90 and a half ounce of the crystal-clear and one and a half ounces of the processing solution and then I'm just going to squirt this through the hair really quick and I just watch it with these because it can take on too much of the silver color if you let it process for too long tilt your head a little bit to the side there you go I'm gonna get it underneath here okay go ahead lay down you can see it's already starting to get that really white platinum color we're just going to watch it and fudge it in and make sure that it gets all over all of the blonde pieces it's stinky it's not so good though okay so as soon as you started if it starts turning gray you're gonna want to rinse it out really quick you wanted to rinse it out right before it starts to turn that ashy gray color and then I'm going to shampoo and condition just normally just whatever that's word that I'd made up normally it's not real word how did I say words and I don't know if they're real words or not words don't put this in the video please don't so now we have these pink chunks that we left alone that need to be refreshed and it will the ends will be a little bit deeper pink because it's not so light but I'm using these urban shock color craze hot pink it's from scruples and they smell really good but you apply them to clean towel dried hair and they're a deposit only so they aren't going to be lifting out the hair and that's why you should do these on bleached out hair or to refresh the color but since since we didn't really know that we wanted to retouch it until the end it's not gonna have the roots but it'll be okay maybe the next time she comes in we will bleach out the regrowth and then do it that time you don't have to do it every single time because it's underneath so this is something you could do every other time and I took that entire section and I'm just gonna make sure that I saturate both sides just by slipping over the foil and opening it the other way that exposes the underside that we couldn't see that was against the foil so and then foil that up and these process for I think 10 to 15 minutes let me make sure on that 15 minutes so as soon as these are done we will hurry and wash your hair one more time and then blow-dry it and you will see the finished product with the refreshed pink and the blond and the brown and it will be beautiful that's the end so to prevent the pink from bleeding into the blond pieces I just pulled the two foils out and kept them in my hand and washed them just in my hand separate from the rest of her hair because I want to make sure that I get all this pink shampoo pink color residue out and then I'm using a cold shampoo or a cold water and I'm going to keep doing this until the shampoo is not turning pink so this is the second time I've rinsed it out I'm gonna do it one more time make sure that we got all of that color residue out so we do not want this to be bleeding too much into the blonde and I'm also going to tell you Ashley you need to make sure that you wash your hair in cooler water for a little while so that you don't bleed this together and if you have a light pillow case I would probably switch it for a darker brown one just put red one while you sleep this can kind of leave a residue of color on your pillowcases and stain all right we are all done with her color and we've just styled it up we retouched your pink so I'm gonna show you a little bit about this or a little bit of this color now so you can see when she looks up she has some stripes but they're not all exactly perfect it's a little bit off but it's like different lengths and then this is really fun underneath here she has all these really chunky stripes they're very defined and that's what doing the vertical foils does and we'll show you this side over here without the pink and another thing that I want you to take note of is because we did the Mohawk on the flap she has really nice color all the way down to her scalp and if we would have just done the Mohawk right there that's where this one would have parted and she would have had dark roots because when the foils if you take a little bit too big of a section sometimes it'll look it would look more like that where you have a little bit of a space because the foil just lifts away from the head a little bit because it's starting to curve so that's a little trick that you guys can use and I hope that this was helpful for you guys and I hope you guys tried this on someone soon so that you can give them some chunky highlights and let me know how it goes and we'll see you next time make sure you subscribe to my channel and share it with your friends that are in hair school or anyone wanting to learn how to do hair and we'll see next time

Please explain how to prune a bonsai

hey Kevin haughty display horticultural tear clips but I also take care of the bonsai collection I've been here over 20 years now when you're growing bones I'd you have to keep the plant healthy in one way keeping it helps please just letting it grow see all the long shoots and everything and then every so often you have to come in and send that out take off the excess growth as you can see up here I've already started working on this Chinese elm and you can see the difference between the parts that haven't been pruned and the part that happens and basically you're sending it out trying to keep each branch in its own little area so there's less competition between the branches for the sunlight I've developed my own style which each phones I artists will that we cut off the bridge instead of growing straight up as you see most of these branches are just growing laterally and you want to cut off branches that are growing straight down so each branch is a little spaced about competition from other nearby branches it's very tedious very time-consuming this one's taking probably two or three days to finish op so it just depends on which species completely working on how much time you you're going to spend on the particular plant you want to really concentrate on the top because of the plant puts all its energy to the top while it's growing and prunus that is the diverts the energy drop the power plant that's like it's always a good idea to start at the top and work your way down

Please explain how to make crunchy bubbly slime, easy diy slime tutorial! no activator,no borax

when you don't have any activator hey guys welcome back to my channel so today I am going to show you how to make woods glue slime this is absolutely amazing and so simple you just have to give this a try out for yourselves if you do not have good glue then just add non-activated to normal glue that makes sense but anyway let's go straight to today's tutorial I hope you guys enjoy and if you do make sure you give a like subscribe to my channel and comment down below any amazing suggestions you may have so to begin the tutorial on doing is pouring in some wood glue then what I'm going to do is add some shaving gel make sure you do have shaving gel yes I drop my camera Giselle haha oh my god now I'm just gonna mix in some black acrylic paint into this mixture now you just want to mix the shaving gel in with your paint and then your slime will immediately certain form as you can see the slime is slowly forming very easily very and very fast actually so make sure you do this and your slime will be ready and you'll have the most amazing slime ever with no activator I know it's literally amazing you have to give us a try out for yourselves but anyway once you finish mixing all of that together so I got food in my mouth very you usually end up with this amazing wood glue slime it is just amazing what you want to do now is put it in a tight container sealed container whatever you wanna call it leave in there for two to three days and then you have your life are you guys I'm back from TV three days yeah I still got food in my mouth but anywhere you should end up with this amazing full of bubbles slide the more shaving gel you out too the more bubbles you'll have them inside just whereas you know my sweetie you okay God so you'll end up with this amazing bubbly slime is just amazing you have to give this a try for yourself the more shaving foam shaving gel um or the other thing hand hand Foam shop whatever you add all this you'll have the most perfect slide ever time for sub ASMR well that's it for today's video make sure if you did enjoy to leave a like to comment down below and to share the video and obviously to subscribe to my channel if you did enjoy that guys so so much for your support you are all amazing

Please explain how to prune spring flowering shrubs | grow at home | royal horticultural society

as roommate it's time to look at pruning of spring flowering shrubs and today we're looking at this force idea which is finished flowering pruning is an important part of annual maintenance it helps to keep them healthy a nice neat shape and most importantly it helps to improve flowering today we're gonna be looking at pruning this force idea which involves removing the old flower growth so it can produce nice new growth through the rest of this summer and autumn which will then bear the flowers next year the tools I'll be using recruiting this force idea a secretary to remove the old flowered growth and a saw to remove any larger dead damaged or diseased growth one of the first things to do is to look for dead damaged and diseased material on this force idea you can see this branch is dead this one's okay but this one is also dead so I'll be using my saw to remove these the next thing to do is to remove the old flower heads looking at the shrub here you can see these here and here and you want to remove this growth back this nice new cluster of growth here these nice new side shoots so I'm just going to carry on working my way around this force idea taking off the old flowered growth as this flowers on previous year's growth I'm pruning it now straight after flowering plants at the flower after midsummer get pruned in late winter or early spring once you've finished removing the old flowered would have a look at the center of your shrub as we're after a nice opens uncongested center this shrub is okay so I'll be leaving it but if you wanted to take any growth out remove it down to the base this method of pruning can also be used for shrubs such as rye bees and the site of data flowering Philadelphus and why julia don't worry if you think you take off too much or if you haven't taken off quite enough the timing is the key if it flowers before midsummer it needs to be pruned straight after flowering and this thing gives it enough time to produce the growth that will then hold the flowers next year so this will size here next year should have a beautiful display of flowers come the spring you

Please explain how to remove a commercial lock - replace a security lock - schlage lock

if you have a commercial lock i'll take you through the steps on how to remove it this is the lock on the outside and here we have the inside and you're going to need either a punch like i have here or an awl and all you need to do is push it into the small hole on the side of the handle and that's going to release a little tab that will allow you to pull off the handle and now we're going to take a screwdriver and we're going to release this escutcheon around the body of it and by gently catching under the edge we can pull the escutcheon off and sometimes they'll be screwed in place or they'll have a tab but the next step we're going to unscrew these two screws that are holding this outside ring onto the main part of the lock so i loosen the screw on top and on bottom and i'm pulling away this protective piece and now we're going to have two more screws to loosen to free up the lock once you have the two additional screws removed you can pull off this plate and then we can get to the main body of the lock now all you have to do is grab the other side of the lock and then just pull it away and it'll free it from the latch and that's the steps to remove a commercial lock from a metal door

Please explain how to fit a chain guide | mountain bike maintenance

in this video we're going to talking about how to fit chain guard on this bike I've actually already got a narrow white chain ring but I want to put a chain guide on for added security so I'm going to talk you through it how to fit that now we're actually fitting in is cgo v you can see that's ball pattern here and also on the chain guide there are different ones so just check up we do get your chain guide there is a correct one to fit your bike there's quite a few different patterns out there and we can actually get a little bit confusing so I've got my a 13 chain guide here if you are fitting another one maybe just check out the manufacturer's instructions I've got a series of washers and bolts that will come to that a little bit later on the tools you're going to need to do this are a flat headed screwdriver and eight mil allen key that's for taking off the cranks and also a crank extractor and then a t25 just to fit those bolts onto the bike so the first step that we're going to get onto it is we're going to take off the crank set now to do this for my specific crank set in commune 8 Mel allen key and the crank extractor if you've got Shimano SRAM it's a slightly different procedure so just check out the guidelines before you start taking off so once you've got that cranked off just put it to one side and just be careful you might have some washers on the actual spindle itself so just take them to the side and know which order they went on right so we're just going to get that chain guide fitted this one actually need three different bolts so we're just going to put each of them on and it's worth noting the first time I going to put it on right now I'm not actually going to use any washers I'm just going to see how the chain line works and then we'll come back and reassess so I'm just putting my final ball in and I've actually got the chain guide roughly about 12:00 o'clock sort of position where it's actually right up there and you can see this if you had a horizontal line across the top that'd be totally flat and the chains going to go through there and it's also going to look over the top of the lure guide I've got my chain guide in place I'm now going to refit the crank set in the chain I'm going to check that alignment to the first step so you can use your flat-head screwdriver and you can just pop that catch open and that all out the top chain guide to swing out the way now with this raised phase crank set I actually can put the chain on after I've put the crank set on if you've got another manufacturer such as Rama sham a no-spin dad she goes right through from this side put the chain on the chain ring before you put it onto the chain guide so I'm just going to loop the chain back over let me actually push the mech right forward and that will give you a bit more chain length and already I think I'm going to have to put some washers and just loop it over that bottom guide as well and just let that sit back in place and then we can close this top gate over and fasten it back up already just looking at it I can actually see that I'm going to need to put some spaces and just to pull the chain guide back over so I've got it perfectly in line you want to have the chain ring finding in the middle between either sides of the top guide and it's definitely just based out towards the right hand side so I've got two different washers here I've got one and a half now on also a three more I'm going to try the one and a half mill and see if that just spaces are enough so it wasn't actually that much of a difference and if not I don't have to try these three millimeter ones so there's actually a number of different adjustments that you can make with the chain guide itself you can change for the position of the batch plate you know so if you do break but damage your batch plate you actually replaces or lay a date with just one single pot and then you can use these two t25 bolts you can change in two different angles and you can do it on the top gate as well I actually noticed that when I was doing my chain guide up there that was seeing a little bit high so using that t25 I've just lowered it down a little bit I think you'll be in the right position now when I put it back on the bike so I'm just going to put that chain ring washable on behind for the bolt through as before and then that gold space that I have just goes on behind it and you just attach that on to the bike so you're going to need now is your t25 torque and we're just going to attach that with the bolt onto the bike so looking down the chain line again I can actually see that just putting those little spaces and it's made a huge difference it's brought the chain guide right out and into the right place so I'm just going to run through the gears and make sure that's not actually rubbing on the chain guide anywhere so the last thing that we've got to adjust is this lower guide you can see here that's actually quite far away from that your chain ring itself so just using my t25 again you loosen that off and then you can just slide it up and you just want it just so that the plastic is just actually just a tiny bit over the chain ring and I'll keep it perfectly snip that back up not too tight and there you have it how to fit a chain guide done for more great videos on GM BN why don't you click chest up there from mechanical playlist and perhaps you want to go out and ride your bike why not click down there for a how-to playlist as ever don't forget to click right in the middle to subscribe it's absolutely free you get great video every single day of the week if you're now going to install a chain guide or you have one already then give a thumb up like

Please explain how to get wispy shavings using a cabinet scraper

and everyone in this video we're talking through sharpening one of these things a card or a cabinet scraper this video will show you how I get these shot and how I get consistent results about 80% of the time should we say let's get going so what is a card scraper rule is bit of metal with a burr folded over the end and it is a very very effective way of reducing tear out if you haven't seen my previous video on reducing tear out by using hand planes I would advise watching that if you're working on furniture with highly figured components but if you're doing little bits like marker treat or you just have a tiny patch of taro that's where these excel because they work very well in localized patches you can't flatten an edge with these but in small areas brilliant so let's get you in close and have a look at how to sharpen one of these right so the first thing we want to do at the cabinet scraper is flatten these faces and then square off the edge so we get a perfect sharp 90-degree corner on as many of these sides as we can actually because that way when one burr gets shot we can just flip it around and use a bear on the other side likewise up on that side as well so you can essentially have eight birds all over this cabinet scraper and that way you're not back and forth between the sharpening station all the time so what we're going to do let's say it's flatten the faces first so it's a juice on there right and instead of just putting it on like that and then flattening it by hand we'll see this car scraper is very very bendy so if you put your fingers in certain patches it's going to wear one place more than the other and on a very small microscopic level I see that as potentially creating a wavy burr where the thickness of this is going to vary so instead of just putting hand pressure on it I get myself a wooden block but just work it back and forth like that that gives you a nice even pressure so this side now faces and yeah it's gonna flip this round okay so we can now see that this has started getting polished beneath all of this gunk that's on here we can actually use this same block to use it to square the edge however if you're using water stones I would advise you not stare like this because you'll just start wearing a big grew through the middle instead pop the stone on its side like that they'll see this is abrasive on all of its sides put the block on that there you go work it back and forth like that so now that is starting to polish that edge to a 90 degrees using the blocks that guide me instead of doing it freehand now I can see there's a little patch on there that I haven't quite reached so it's like a dip in there it's gonna keep going on that I'm just going to shift the block occasionally to make sure I don't wear a big groove so see how that creates a groove in there it's going to start rounding the corners of the 90 degrees so just make sure that I am moving that out okay so that I can feel a 90-degree edge on that and it's pretty sharp just going to flip it over to this side and I'm going to do the opposite side of the cabinet scraper lovely you can actually use a cabinet scraper like that with a 90-degree edge it gives you a very fine cut instead of an aggressive one so if you've only got a very very small amount of something to clean up then just go ahead for that you don't need to go any further I'm going to take this a step further I'm going to polish this on the six thousand grit now just because I have it available so that's always just gonna wipe all the grit off here here we go so this can use the opposite side of this block as well back and forth like that I really need a new non-slip pad for this good good yeah that feels super smooth now and so I'm just gonna do the edge on 6,000 grit as well I can see that that edge is actually getting a little bit of wear on it so I can actually just as well and the amount of times I've done this and sliced my thumb on this top edge here when you give yourself those sharp 90 degrees just watch out for that don't put too much pressure down because it's like that you start putting fish gills got actually really yet put fish gills on your finger so avoid doing that if possible there we go feel those nice and sharp nice and polished it works the same as if you were to his blades and chisels the higher polish you get that edge the sharper it's going to be so now that's 90 I just caught my knuckle as well bloody hell so now that is 90 degrees we are done on the sharpening stones so these can and what we are working with now is a burnished now this is quite possibly the ugliest one you will ever find but for me it's the best one all these Lee Nielsen ones notice how I said that properly so have you pointed out that I've been saying it wrong for all this time Lee Nielsen it is not line Ilsan I work in a tool shop everyone says it differently it confuses me now I know how to say it so Lee Nelson do a really nice shiny burnisher and it's got a round rod on it you can also get them from kirshen and Veritas but I don't find the round rod works for me this oh no one has a round rod on it and a pointed one and this is available from workshop heaven really recommend it if you're looking to shop in a cabinet scraper so let's move to the front bench and I'll show you how to sharpen it right so the first thing we want steel on this is draw a hook out of the edge on all four faces so on a microscopic level the sides will have like a sort of horn shape to them like that so what I'm going to do because I like to go for an aggressive burr I'm going to get the sharp point on here and then just draw it back on here with firm pressure there you go so just do that once and I can feel that started putting thing on there on this side as well so it's pretty firm pressure doing this like sort of cutting an apple with a blunt knife should we say that was a good one there that's what I mean it's so variable sometimes it's good and I'm sort of holding this burnisher so it's a few degrees off being parallel with the top of the cabinet scraper I find that just sort of works for me to give enough pressure on that edge without completely rounding it over so now we've got the horn shape on all of the edges of these we can now start working on folding them over so move to the vice for that say here we go Clint this invoice relatively low you don't want to have too much flex in the top of that if you clamp it too high it's just going to bend all over the place and make your angles quite difficult so this burner sure you can see that the tips here are not parallel to the blade and that angle is what I sharpen these cabinet scrapers to so if I hold the handle parallel to the ground I know that I'm going to get a nice reliable wedge on there so we've got the horn shape on here all I'm going to do is get the round end of this and hold it so it is perpendicular to the end so I'm putting a 90-degree pressure on it and I'm folding those horns out like that so again firm pressure I'm going to get that a bit lower case up and get them flex on that still we go right so 90 degrees firm pressure all the way along you can actually see that burr being formed there you go I've got a bit of one there there's pretty good if better on this other side so because this size feeling pretty good I'm going to carry on using the round side so now I'm going glitz um where between being parallel to the ground with the handle and parallel to the ground with the edge on this so a few degrees off and fold that over again there we go and very good now and now I'm going to hold it with that parallel to the ground don't pressure whoa that feels good right this one where the bird didn't quite get started I'm gonna use this pointy one for that so again a few degrees off drag it back nice no flip it around and hold it so the handle is parallel to the ground lovely on it we're gonna do the other side now so this one I'm going to try and put a really heavy bear on it so we're going to do 90-degree pressure straightaway with the pointed end on this oh bloody hell yeah that's going to be quite quite aggressive that might be a bit too much but we'll give it a go lovely and bit more weight and do the other side now oh that is a biggie there flip it round just to do this final edge so the handle with parallel to the ground lovely lovely so the bird is very difficult to see on this but to demonstrate it is there look I can catch my fingernail on the edge like that in fact I'm just scraping bits of my fingernail off but yeah that is sharp you can feel the bear on there has been polished to a nice edge so let's see how it performs he remember this stuff it's just gonna lob it in the bin the bloody horrible thing okay there another reason to watch my tear up video this stuff is just disgusting so here we go no tear out again see how Thanksgiving lovely shavings I'm just trying the other side quickly see what we've got here beautiful shot on the other side have I got all four oh my god I might have done it I might have done it you ready yes there we go so pink ivory can't do it with a plane but I can do it with a cabinet scrape but can't thank God at least I bought some sort of resolution to the tear out seriously I was worried I was never gonna be able to do it there's an absolute catastrophe let's do this corner I was struggling with the floor so you can see all these cabinet scrapers are really really effective at removing tear out however they are not good at flattening edges so if this was an entire chair leg if you were to make one out of pink ivory there play - yeah but you wanted to me to clean a taper on it you obviously wouldn't be able to do it with this because this is removing very small amounts of material you would need to find a way to do it on a plane so that be a reason to watch my tear up video if you're looking at doing stuff like that god help you but that it's working beautifully probably sounds really nice on the microphone in the world but yeah there we go that is how you sharpened a cabinet scraper let's say that burnisher I cannot recommend it enough despite being the ugly duckling in my toolbox it's absolutely great for getting you out of those sticky situations where you're not quite getting enough of a burr folding over just switch it to that pointy face and my good mama that is going to put a sharp edge I'm not even tired your wire said my big cameras do some things to me you know that pointy edge on there gets me out of a lot of sticky situations and I'm just really happy that we've been able to clear out this pink ivory of all of its terror it's a great representation of what a bench plane can't do a cabinet scraper will get you out so yeah cabinet scrapers great tools just make sure you get that edge perfectly square on the stone using the techniques I've shown you make sure you use a block for when you're flattening the faces and likewise for flattening the sharp edge on it because that 90 degrees is what turns into your sharp edge at the end of it so there we go hopefully you have learned something best of luck

Please explain how to make a egg tray on a paper,,,...

hi I am Arjun Domingo and I will teach you how to make an egg tray using a paper you will need a clean paper and you may also use newspaper or magazines and Diezel first fold the paper like this and cut the edge I have nothing so fold it in a half but it's on sighs all right guys we see the line during the feathers and now for the far side spin to the center so when two papers and point the fourth ice again after you for the four times again for this in a half nicely and insert your finger into the open signs of the paper and for this yes me likey gisli then turn it over and get spread and that's all that's the next step but an entry news dish then you collecting

Please explain how to groom a long haired chihuahua/pekingese part 1

hey guys so today i'm going to show you how to um groom a longer chihuahua pekingese and knight is going to be our helper today okay so first thing i like to do is like have them lay down of course so you can do it got a big poofy tail but i've got just a random normal brush nothing special and what i do first is i go brush his hair up like this first to get all the snarls because they're long haired so you know you gotta get all the snails from their long hair he has long hair to a little pekingese and his name is knight and he's a sweetheart but you just brush them what i do is i brush them upwards first and so and then i just grab his tail very gently so it's all fluffy it doesn't hurt him if i go like this it doesn't hurt him so what i do is i just very gently groom his tail which he doesn't mind at all because he actually likes to be groomed tonight or buggy then i groom his neck very softly because you don't want to choke them when it hits their neck it could choke them so you got to be very gentle very which i use the soft side because i don't want to hurt him or choke him and he knows to roll over for me so he'll roll over when i start to do that and he is a show dog so i do this a lot with him then i give him good boy then i brush then i start brushing with the soft side you know just so you can get all this they could get it all put down now because i like his hair to be down instead all pooped up because it just makes him look more soaked missy are you okay where is that later missy girl is that waiter the eyes waiter and missy is the mommy she's going to come in real quick i wonder what's going on missy come on come on we're doing a video we gotta move okay so now i just go back to brushing with the hard side because i put it all down and then i brush with the hard side just get it all back up again because i like to go over a few times just get everything all done he's got a cough he's some people might think i'm choking him but i'm not choking him i'm just not even holding on very tight as you can see it's not tight onion it's loose and so he's just got a coffee it's uh we'll see you in the next part of the video which is me just doing more stuff with him like the braid in the tail i'll show you how to braid there too see you in a minute okay hey guys so i'm i'm back i just had to go so we're going to show you how to braid his tail so some people might think it hurts him but it doesn't because his tail is literally it ends right here his fluff is this and this is all i break this is all i braid i do not hurt him one bit but i tied him up to the knob on the door so we just the nighter show i got a normal hairbrush because i need to get all the snarls out before i do it and i'm very gentle when i braid his tail because i don't want to hurt him or harm him in one way in many ways i don't want to harm him but i'm just brushing through his hair he's he actually doesn't shed very much some people think that something's long haired he sheds a lot but he actually does not shed barely at all but his brother does his brother's the same one but except i keep his hair all groomed and everything and i groom it a lot he doesn't shed very much so because i get all of it out as you can see in the last part of the video i showed you this which actually helps get all the loose hair out so we're gonna get into the braiding okay so first thing you would do is same thing as braiding a person's hair you just grab a piece of a lock of hair get it all good you know and then grab another lock just like i'm not going to fish toe braid because woman i don't know how to do that with the dog hair but i'm just gonna go on and braid which does not like i said it does not hurt him because this is his tail his toe is actually really small compared to all this fur all this fur is mostly all of his tail practically that's all the tail really is is fur so i just as you can see you guys might not be able to see it but i just braid and i got the small rubber bands because or else they just come off because he likes to run around a lot and i show him in fair so he's actually a showdog and i i got sick he doesn't shed as much because i groom him a lot because he shows a lot and he needs to get all that snots out while he shows and so i groomed him a lot more than his brother so his brother sheds a lot more than him but he's got one of these small rubber bands he doesn't like the rubber bands being put in he doesn't trust it but later i just show him that i'm putting him in he doesn't really care but see as you can see he stares at him he doesn't trust it he's scared it's gonna snap his thing but it's not i'm very gentle with him but as you can see the final touch of his manicure and then we might show you how to put the bun in in his fur which we'll do that right now we'll see you in a second okay so now what i'm gonna need the kitchen well just wait a second i'm almost done with my video but now we're just gonna show you how to keep it out of the way this is the real part he does not trust because it's right next to his tail but i put it in a bun so it stays out of the way and it's not dangling down which again it's not hurting him it's on his fur it's not on his tail part but that's all i do is i put it in a bun kind of like what you do with a horse like when you're doing dressage and everything is you put it in a braid then put it in a bun their mane and so yeah that's grooming with neither bug oh yeah and we can also what i do sometimes is i quickly just brush a little bit more and so we'll see ya peace out

Please explain how to gift wrap a bottle of wine using a tenugui.

welcome to tanoogy instructional video number two in this video you'll learn how to gift wrap a bottle of wine using a tanoogie so here's our tanoogie right that's our tanoogie and then we're going to learn how to gift wrap a bottle of wine all right let's learn how to gift wrap a bottle of wine using a tanuki the first thing we're going to do is measure out the snooki for your particular bottle of wine slide the bottle down to the end of the tanoogie and then look at the neck of the bottle around mid section of the neck of the bottle mark that on your tanoogie with your other finger slide the bottle up to that point fold the tanoogie over and fold it under the bottle on this side and under the bottle on the other side starting from the left wrap the tanoogie over the bottle making it tight and roll it towards you continue to wrap the tanugi around the bottle around its around its neck in the same direction that you started then you twist the top and wrap it around the bottle in that same direction that you had wrapped the bottle from the start the end around and through and there's your gift wrap tanoogie bottle

Please explain how to

this video is to demonstrate the braiding of a sinker starting with the sinker in your right hand put the tassel across the palm of your left hand putting out your first two fingers wrap the sinker around and pull it through from underneath your fingers making a new loop putting your fingers through grabbing onto the part of the sinker underneath as you pull that up you want to twist it away from your body if you twist it toward your body it will cause a knot twist it away from your body put the thumb through the loop that you've just made bring your finger around down through the loop and take hold of the set of the part of the sinker that continues to hang down again thumb through the loop finger around and through the loop holding on to the sinker again that's holding that's hanging down you do that all the way to the very end of the sinker body again rotating away from the body the thumb through the finger around and through rotating it away from the body you can make the loops as big or as small as you want when you get to the very end you will have a loop that you can hang the sinker on in order to unravel the sinker hang on to the top part of the last knot or loop and just simply pull the loop through and then it should just pull through without any hesitation

Please explain how to make keto brownies with cream cheese frosting

a pedo chin hi everybody I'm Tina and Jamie and we're the fetuses today we're going to be making a keto friendly brownie so what I've done is I've melted two ounces of the bittersweet chopped dark chocolate and I melted eight tablespoons of Kerrygold butter in the microwave it took about a minute in 25 seconds to get it all melted and what I'm going to do next is I'm going to add in 3/4 cup of work granule sugar and then 1/4 teaspoon of pink Himalayan salt and they just mix that up after that sniffs you're going to go ahead and you're going to add to a after that we're going to go ahead and add a teaspoon of vanilla extract and 1/4 cup of almond flour now that we have everything London we're going to pour it into an 8x8 square pan that's been prepared with grease it with butter you just kind of poured in there make sure it's spread evenly throughout your pan and we've preheated our oven to 350 and it's going to go on there for 20 to 25 minutes and while that's baking we're going to come back and show you how to make the frosting for it okay so now we're ready to make our cream cheese frosting so we have softened to room temperature 8 ounces of cream cheese and we have 3 tablespoons of confectioner's Worth and 1 tablespoon of vanilla okay so we're ready to frost their brownies after they've cooled up for a little bit and we're going to go into a something yummy broom thank you bye

Please explain how to trap more coyotes with a shell

I'm about 10 15 feet off the road there's a dirt pile it's got some old badger holes cows have been coming up and checking them out and it's it's got a lot of by up hill it's just a small pile where they're making these sand arrows down here in Texas so I'm gonna put a set in a flat set use them turtle sail which is one of my favorite flat sets because it's almost like you're gonna get action I mean it's amazing how that works but I want to talk about how I'm setting this up off this big dirt pile this can being grass didn't really make any difference just use your head when it comes to how you're gonna be setting these traps in here think about the coat I could go up there and I could put it in one of these holes I could come down here and just maybe this clump of grass I guess I could just staple it to the ground right there but I have no control with locations like that I'm leaving too much open to the interpretation of the cow how he thinks he's supposed to enter the set when I come over here this is naturally done this way I've got natural they're coming up here anyway I'm not gonna change hardly anything I'm gonna I'm gonna blend the trap I'm gonna put my turtle shell in bait lure it and next time when these cows come up check these holes out he's gonna be wearing a number for Sleepy Creek long spring lately I'm using a natural way that I can guide kenick I'll get up in here and really fight I'm not talking about dissing grass being blocking but I'm talking about with these sticks and everything like that there's a good chance I can narrow down the counts approach she's not going to come in on this side because I mean it's just a solid wall of thorns you've got all these big sticks over here he may try to come over the top side but once he gets his body down inside of this will opening he's probably going to come out where my traps at this is what I'm talking about control this is how you control a cow and this is how you catch more cones one of my favorite things to find it's just it's a turtle shell you see them you know whereas you ride around you see them as you're out fish and stuff like that I collect them I've got a big gutter nail that I drive down through here this is very natural you what you just don't want to lay this thing on the ground without a nail or rebar or with a disposable wiring it off or something pouts have a way of stealing these things if you don't anchor them down they really can't get their teeth on them so if they if they wanting to take the turtle shell they're gonna have to come back over my trap several times to do it but you want to make sure that you spike these things down okay I partially covered that with some of the the natural sticks that up there I just don't want this thing sitting out here like aliens put it here last night I wanted to think they look over here and it's something they just hadn't noticed before so I've kind of put some of the sticks back over the top right in here is where the kites are going to come because we've got an edge here in an edge here and this is the higher side this is where I'm gonna put the trap right here is why I'm physically gonna put this trap this is beautiful dirt right here too got my number for wicked Creek another thing with all this brush it's next to me it's gonna real be really easy to get high this chain I wish all dirt was like this down here cuz some of this got to use my fireman's tool just to get it set in we are talking touts we disturbed this so we want to make sure this bad boy is solid we're not having a dirt pattern per se with this thing blended and I want this thing solid you can in your mind's eye hopefully you can see a cow he's going to be up here playing with these holes when he sees her smells his turtle shell he's gonna come in and he's gonna hug this side he's just not gonna walk right up the middle worst-case scenario for me as he comes on this other side I could put another trap and I could guard that over there what you'd be fine but I'm gonna make it a little rougher on him on this other side I'm but I'm gonna help guide him right here now before I totally sit this trap I mean you see all this junk that's around through here so what I'm getting ready to do is not unnatural here but I'm gonna help let him know where I want him to go by something about like that put some or it looks like it's been born here been here forever so I'm giving him this option to come on this higher side which couch like the high side so that's why I'm picking that side all this loose dirt go down to my paper so I can physically see that pan know exactly where that pan is at you know I've done a lot of riding on peat moss and showed videos with peat moss there's a reason guys I don't use that as much down here some years I can get away with that some years I can't this is a year I can't the pack rats were tearing me up and in ground squirrels last year we had these how do you know what they were there like big grubs that seemed to focus in pull the peat moss and they would actually lay eggs or something then these big larvae would screw my whole thing up but sift it in that's very natural-looking cover it up to the dirt over here and I'm gonna move my drag around on that side all I've got to do is bait and lure that turtle shell you can do it before after really doesn't make any difference we'll take some federales I'm going to be using federales in game and ball stock there's federales by using this turtle shell it's gonna handle the weather extremely extremely well if it rains it's not going to matter wouldn't matter if federales anyway definitely wouldn't matter with the boss dog but it just protects it from Sun just keeps it lasting a whole lot longer you can preload these at home I'm sticking that right in the front I've got my fertile shell pinned down I'm using the cows habit and wanting to be on the high side I've got this this is very natural-looking basically only thing I've done here is put the turtle shell up there better trap in front of my trap placement on this is about two feet back because if he does get all the way up to that turtle shell I want a shot on his back feet also I don't care how I catch him I just want to catch him but this is a deadly deadly deadly flat setting for cows but make sure you pin those shells down or you'll find out how quick they can get around your trap sometimes this is from a cow it's point of view I'm giving him two options by habit he's going to take the high side more than not I've got my turtle shell right there it's not just sitting out here in the open it's got good smells coming out of it turtle shell give you a pill they like chewing on these things anyway it's a killer set guys go out and find those turtle shells and feel those stretchers up

Please explain how to polish your parade shoes

hello guys today I'm going to be showing you how to pull your debt preachers now this is in my opinion one of the easiest ways to pull your britches now as you can see this is the result of this technique throughout many other ways of doing it we're using fire etc by find this is the one that works the best so what you will need is a cup of water some cotton wool balls some shoe polish and the one I'm using is Kiwi black shoe polish and I find this is the one that works the best you actually find that most cadets if not all actually use this brand of shoe polish and third you male cadets this console slightly strange but you need part of a woman's tight no para tights yeah you know you know what they are but yeah I just got this and tied it here Smith a sort of cap thing then this is to protect the toke up so yeah let's get stayed what we want to do is first of all just with the tight just go over the toe cap just to make sure that there's no date or dust on it because is you start polishing it polishing the toe cap you'll actually polish the day into it it'll cause bumps and also i need i really want that because then all the problems are care they just mess up your shoe so you'll see from an open shoe polish you want to get a cotton ball bulb and just slightly dip it in the water and then squeeze the excess water out on the side of the club as you want the Cold War to be damp obviously not dripping and then you take it got a wall and put the tiniest bit of polish on it because thin layers actually give a better shined and thick layers so yeah that's enough what do you want to start doing this go around small circles on toke up now if you are if it's a brand new shield there you may want to put a few thick layers on first but because this is a fairly poly shield I'm just doing thin layers now obviously the shiny issue is the easier it is to add layers and I don't know if I've already said this but you want to go around in small circles on the toke up and when you first put the polish on it will go go but that's normal don't panic just keep going around in small circles did you can see a shine is developing just keep going now what's really good with this is once you've got a decent shine it's like super easy to keep on top of say just about 5 10 minutes before I've we've been a parade night just go over it it's nice and simply just keep going small circles and still until you get past the dual stage you all see the nice shine coming through now what I like to do is get rid of this one and get a brand new one dip it in the water also squeeze the excess water out and then it's they're putting the Polish just go around I'll talk up just call portable in and this really helps to bring out the shade so you just keep going small circles and other this is a very long process but once you get the hang of it the results are just fantastic right I think that's about them what you can do is you can like breathe on it and keep going small circles I think that kind of helps too but not quite sure if at some doors but just module so yeah as you can see you got a beautiful shine on that shoe and then this is where the tight comes in handy cuz you just take it punch it up wipe the water off because this is soft it doesn't scratch your shield and then what you can do and what I do is put the tight over the toe cap when put it in storage and then this avoids you toke up getting scratched and they have it that's how to bowl your cadet parade shoes hope you enjoyed this hope this helped you've got any questions just comment below thanks for watching bye you

Please explain how to make meatloaf cupcakes with potato icing : comfort foods

hi my name is chef sid marshall and this is how to make meatloaf cupcakes with potato icing meatloaf is one of those great recipes that every family has their favorite start by putting together your favorite meatloaf we're going to take our muffin pan and go ahead and fill it with our meatloaf then we'll top it with just a little bit of ketchup and throw in the oven and bake for about 5 minutes we'll take our mashed potatoes that we have put into a piping bag and slowly pipe them on top of each meatloaf pop back in the oven for another 10 to 15 minutes at 375 and there you have it how to make meatloaf cupcakes with potato frosting

Please explain how to organize craft projects | clutter video tip

Hi. I’m Lorie Marrero, creator of the Clutter Diet book and on-line program, and today we’re going to talk about how to organize craft projects. So this is different than organizing craft supplies. Another day we can talk about organizing your paint brushes and your crayons and your paints, but we’re going to talk today about how we organize the projects that we have purchased supplies for and how we actually accomplish them and get them done. So you may be one of the people that I’ve seen over the years that has many UFO’s in your house – unfinished objects – whether it’s the wadded up needlepoint project you have in the bottom nightstand drawer or an easel with an unfinished painting on it, or whatever it is for you, these things kind of haunt you and they bother you and it feels so much better to finish what you start. So let’s talk about how to manage that all the way through. So first let’s talk about preventing some of this problem in the first place. So if you’re the kind of person that gets distracted by shiny objects and tempted to do all kinds of new creative things, that’s fantastic, I think you’re a wonderful creative person, but you should probably put a stop to all the new projects for a little while until you’ve finished the ones you have. And that we you’re going to feel a sense of completion and you’ll feel better about all of your crafting. So if you are going to take on a new craft – let’s say you want to learn how to crochet – make sure that if you’re serious you really commit to it by signing up for a class immediately. Don’t just buy all the supplies and bring them into your house and put them away with the hope that someday you’ll sit down and have the time to figure out how to do it. Make sure you commit and get someone to teach you or something. Another thing you can do is if you have a lot of UFO’s laying around and you get real with yourself and you decide “I’m probably never going to finish this,” you can hire someone to do it. You can get on Etsy.com and there are people that will finish your projects for you there. Or you can ask your favorite employee at your local craft store and see if they know somebody who is very good at that craft, or there may be a bulletin board in that store. But you can find somebody to get that done so you don’t waste those supplies. Also you might take that project and put it into a “while you wait” bag. We’ve made another video about this before. This is a bag that you bring with you to a ballet lesson, or a soccer practice, or a doctor’s appointment, where you can use that found time to work on these projects and get them done. Another thing you can do is if you get very realistic with yourself about what you will and won’t finish, you may decide that you’re completely finished with a whole line of crafting, like you don’t want to crochet anymore or whatever it is. Donate that to Goodwill or if the supplies are very expensive and you want to recoup the cost, sell those supplies on Craigslist. But don’t keep them around your house making you feel bad about the incompletion of all of that. So as you’re managing the projects you do have and you’ve decided which ones you really want to finish and you want to continue to maintain and work on for a while, I would suggest using what we call “project drawers.” So here I have a unit from ClosetMaid. This is the Cubicles Nine Compartment Organizer. They have all these different colors of fabric drawers that go in here. So you could put nine drawers and you could have nine projects going on (POP), or as I have here, five drawers – they’re kind of in a checkerboard pattern – but I’ve got like a little scrap-booking kind of card-making project that I’m working on right now and that’s in here. And what you want to do is you limit yourself to only this number of projects that you predetermine and anything else, you can’t take on a new project until you’ve finished the ones in your drawers. That keeps everything all contained, you can pull this out and take it somewhere else to work on, and it looks nice and it is a really good way to contain what you’re doing and have a visual of what all is being worked on. Another thing you might want to do is just get to the root of why you are not finishing these things. Do you need help with the instructions? Are you stuck? Did you make a mistake and you don’t think you can fix it? Again, get some help. Ask someone at your craft store, put something on a bulletin board, or ask someone on Etsy. But you can figure out how to do that and move forward. So you don’t want to have all this unfinished business around your house haunting you, bothering you, tugging at you. You want to enjoy your crafting and especially enjoy the completion of it. So we hope you like these tips. And if you’d like to subscribe, we’d really love that. You can find us always at clutterdiet.tv. See you next time, and may you always be happy and grateful for having more than enough.

Please explain how to build a solar panel $1 a watt diy solar panel part 6 humidity water solar test buster

hello I'm your host Dan Rojas and it has been raining for about six or seven days now we have gotten way over a foot of rain where we live see the ditches are completely full over here this is a tropical system so there really hasn't been a lot of lightning with this or else I wouldn't be out here when it's raining but I wanted to show you something I've been wanting to test a solar panel that I made for a while this is about four foot deep by the way I've been wanting to test the solar panel but we just haven't had the sunlight to do it what I have done is just let it sit here for the past few days actually when it was not so deep I had it over in there I let it sit out overnight but goose eggs anyways I just want to show you the waterproofing on this panel if you look there is absolutely no water infiltration on the front part of these cells there's no humidity these are the spots where the resin came through remember I had mentioned that these cells are cracked so some of the resident came through that is not infiltration of water it would be impossible for it to go in the middle if it did have infiltration it would be up here along the sides and everything is sealed everything is fine this panel actually produces a voltage even with this but I just wanted to show you that this has been sitting underwater in this weather for about six days now before I did that this camera is fogging up a little bit it has been in our air conditioner in our house in Florida you cannot take anything from any any cameras of any kind in the morning time from inside a house AC out into the humid air because it'll just fog up if you have a tape camera it'll take condensation detected on the record head so you have to wait about two hours to record anything this panel has been in and out before the rain started I had it in and out of our house every day so if there was any humidity that would have built up in front of these cells going in and out of your AC in the morning would have done it the panel did fog up but it was strictly on the outside this is all just outside stuff everything works so right now we have a nice break those clouds and this panel over here is hooked up to this grid tie inverter and it is producing a solid 45 watts this these cells are 1.8 watts apiece so they should total 65 watts your grid tie inverter will actually take a little bit of the power usually about 10 watts so that would put this at a true 55 watt panel now some of these cells are broken all solar panels generally don't give you the full why did you buy an 80 watt panel you might get actually there's some dirt up there too so that's probably not helping much what's that rebuild and see if that helps but you generally don't get 80 watts from an 80 watt panel especially when you go through a grid tie inverter that bumped it up to 46 this panel has been sitting in the rain you see the wood got a little damaged there I didn't treat this wood because I wanted to show people that wood can get wet and not warp not top out of place not crack and break your glass like some people say you would if you look right here where the resin has spilled over on this this clear spot right here this clear spot is because the resin was there so if you want to treat your wood you should do that what you want to do is put a clear varnish over this preferably a nice white spray paint is going to protect the wood from some UV and I don't know if you can see that but we are bouncing around 50 49 to 50 which is really good considering that there are broken pieces weather and then there's also the spots where the resin came through doesn't really affect it much at all if this does yellow it is such a thin layer that the light's still going to come through pretty good and that's all that you really care about let's just say 45 watts with this panel these cells were the broken cells I actually like I was I paid 50 cents apiece for them so we have 36 18 dollars in the broken cells the glass was free the frame was three bucks so that's 21 dollars the resin on this was about twenty dollars that's about $40 tape wiring maybe 45 dollars so we're still below a dollar a watt with this but everything is sealed up this is the same panel we built the same one that's been sitting in the rain I'm going to clean it up and then go ahead and waterproof this and use it this is that panel in action to the good tie inverter I'm your host Dan Rojas thank you for watching and enjoy our videos

Please explain how to stop drawer from sticking plus popping renovation repair video

OK. Got a drawer kind of sticking here. Let's see it was this one here. Hear how it's kind of popping. What's going on there? Feels like it is this side here. So pop it out and have a look here. See what is going on with our drawer build here. Looks like we've got a spacer right here. See if we can adjust that a little bit. I think it needs to come out even a little bit more. Yeah it looks like someone added that in order to bring it out a little bit. So I am going to double it. Fold it back. So that it brings it out even a little bit further. See about this little front piece here. I'll just follow their idea and just make it a little thicker. OK. There we go. And let's see how that works out. Put our drawer back in. It's still kinda popping there. So let's see what else we can do here. Bring it over from the other side instead. Got a penny here. That ought to make a good little spacer. One cent spacer. Hold that in there. Tighten it down. There we go and let's see how that goes. Oh beautiful. Just following the same idea. No more popping. Everything is doing what it should do. So usually it is just a matter of balancing it out somewhere. This one was just getting off the track just a little bit. Now everything is back on track. Good to go. Nice new remodel. Good to go.

Please explain how to make a fake wound

i hate you i'm going to show you how to get this kind of effect with your arm for halloween yeah that's not real just making sure that everybody all right yeah i did this all by myself see you around looks like a cut or something all right so what you're gonna need is um you're gonna need powder i don't have any here in my room right now you're gonna need glue get that at the dollar store you need um watercolors get that at the dollar store paintbrush usually comes with your watercolors but dollar store water container around the house free i guess um all right so where do you start off so the first place where you start off is you coat your skin with glue and you make sure you make it really really messy and stuff and you pour it all over your skin and you as soon as you pour all over your skin then you pour um the powder all over it and it will get really like nasty and stuff and then you'll get this weird texture which looks like this without any color and it'll be white and then after you do that all you would have to do is just paint over it and remind you that when you paint and stuff people are always like yeah yeah yeah yeah you need blue you need blue well not necessarily true that you need blue i mean like if you don't have blue you could always use a darker color for example that you would use any kind of red any kind of brown that would help black is very useful but you could also use purple blue is just a tint but just try not to use green because green would kind of screw it up and make it look ugly like not even a cut look like no one gets green cuts or any kind of green tint cut and you just keep on going over it and i'm going over and going over it and that's pretty much how you would get this and if you want a better tutorial i could probably show you that and then you see how all that fading and stuff what you would do is you would take your palette right here which already used water and you just put it on your take a paintbrush and just use the palette from there and then you dip a rag or something or tissue in water and then just dab it on there and fade it away and that's pretty much that all right so comment rate subscribe and happy halloween well it's not halloween yet this is just for halloween purposes alright deuces

Please explain how to clean a pump sprayer

how to clean a pump sprayer pump sprayers use a telescopic plunger to draw a solution such as an herbicide or pesticide out of the reservoir after the solution leaves the reservoir the plunger pushes it through the hose into the spray gun and out the nozzle operated by hand pump sprayers utilize high pressure to spray at distances of up to 25 or 30 feet pump sprayers require cleaning in between uses to flush out chemicals that may dry up and clog the inner workings of the sprayer things you will need small bowl warm water dish soap remove all chemicals from the pump sprayer empty the chemicals from the pump sprayer by either using them up or disposing of them according to manufacturer other recommendations soak the nozzle of the pump sprayer in a small bowl of warm water and a squirt of dish soap allow the nozzle to soak for approximately 10 minutes rinse the nozzle with warm water and dry it with a paper towel pour warm water into the reservoir of the pump sprayer along with a few squirts of dish soap if you do not have dish soap any mild detergent will suffice soak for approximately 10 minutes reattach the nozzle to the pump sprayer pump the soapy water through the sprayer several times to rinse out the hose sprayer gun in the sprayer nozzle pour the soapy water out of the pump sprayer and fill the reservoir with warm clear water pump the clear water through the hose sprayer gun and nozzle to remove any soapy residue allow the pump sprayer to air dry tips warnings if you have used an herbicide or pesticide in the sprayer clean the sprayer with ammonia instead of dish soap pour the ammonia into the reservoir at a ratio of one quart of ammonia for every 25 gallons of water allow the ammonia solution to sit in the reservoir for 15 minutes and then pump it through the hose sprayer gun and nozzle until the reservoir is completely empty allow the pump sprayer to air dry check the information booklet that came with your particular pump sprayer to see if the pump mechanism requires yearly maintenance some manufacturers recommend taking the mechanism apart to clean and oil at once a year never store chemicals or leave unused chemicals in the pump sprayer you

Please explain how to time block and handle a schedule change

hello there replay viewers thank you so much for tuning and if you enjoy this scope be sure to tap the screen heart it up and if you're not following us yet be sure to click that little bald peri guy down there and follow so you can catch us live next time hello my friends happy Monday hey guys hey Kayleigh hey LaShawn hey Amy I see you guys happenin alright so obviously I'm showing you a blank to-do list because this is how my to-do list is right now I stopped by to do this for the week but I figure this is a perfect time to talk about time blocking and to get going hey Leanne how are you good morning hey Larissa okay let me double tap hey friends hey friends how are you are you doing good morning good morning everybody good morning the call how are you hey everybody okay so you guys ready hi amber amber Zod amber it's super early what are you doing on your in Kali girl good morning friend so hello how are you happy Monday it's Monday I figured today is a perfect day to talk about time blocking do you agree are you frazzled yet I'm a little frazzled just a little bit I love the hearts they're so cute all right so you're getting Oh getting the kids off to school okay gotcha tired and sorry got to play with my green nephews always oh how cute oh that's so much fun yeah that that would make you tired and sore oh god it's Monday you guys it's Monday but we're gonna talk about time blocking mostly because my time blocking and day blocking has changed and I figured this is a good time to talk to you guys about how I changed it how to handle a change in your time blocking because I feel like when things go awry we lose our minds when we don't have to good morning I am knocking off my to-do but yeah good job hi Michelle you love time like me too time blocking is time looking and a blocking on my jam like I love them I love them but mine has changed so we're gonna talk about that today if you are new to me hello new friend my name is Amira Martin and I blog at four hat and frugal comm where we teach families how to have fun on a dime how you could be a baller on a budget and how to live a full life unless hi hello hello thank you for sharing Michelle is just like the safe you want to share with your friends you guys can go ahead and share now so that way they don't miss any of the information you can share via Twitter Facebook or here on periscope share with your buddies because it's Monday and I'm pretty sure some people need to have this discussion today Oh Thank You amber for sharing Thank You Teresa okay so time blocking for those of you that may not know what time blocking is I have actually done a couple of scopes on them if you go to catch dot me slash Amira Martin I organized today you guys you don't even know look at this organization look at this and then Larissa gives me the link she hooked me up hi Alice Alice just popped in you guys Alice from six chases love her one of the best periscopers ever so I have talked about time blocking quite a bit hi Alice how are you but we're gonna talk about it a little bit more today so here's a quick synopsis of what time blocking is and day blocking time blocking is basically creating blocks of time for your day and assigning those blocks of times a specific task or a specific activity that you need to do on a daily basis or maybe even a weekly basis so each block when I do time blocking this is this might be a little bit different from other people I do not assign the block a time it is the first hour of the day or the second hour of day the third hour of the day why do I do it this way because I had three children okay and my three children I would like to wake up earlier than they need to which starts today earlier or later which starts the day later so my children change up my time this is why I do not give my time blocks actual times they get an hour so the first hour of my day this is what needs to be accomplished the second hour of my day this is what needs to be accomplished and so on and so on and so on that's how I do it some people actually give actual times because they're responsible and they get up at an actual time during the day mm-hmm no you call them bubbles oh I love that they care not about they got children don't even care they don't care they're like oh it's 5 o'clock in the morning what's the problem but what do you mean I usually wake up at 7 so what I want to wake up at 5 so guess what hour 1 starts at 5 that day doesn't it mm-hmm it does it does Thank You children so this is what I wears not right it's 5 o'clock I'm hungry can we eat like I'm up mother I I need to eat I don't care what time it is it's just the first hour of the day I eat in the first hour of the day that's how children operate but that it does work do you factor in getting ready yep everything well we we homeschool but yes they have to actually get ready for their day to have to get dressed aka and all that good stuff r1 consists of me sleeping haha oh do we have oh we have a troll I got him um so that's how I do my time blocking it isn't assigned our and within that hour I get things done now the hour tends to be the same hour most of the time but this gives me the option to push that hour back or to push it forward if I need to horrible horrible horrible look mom life is tough ok it is I don't care what anybody says it's so tough so that's how I do time blocking now day blocking is another aspect of time blocking some people like to assign a certain assignment or a certain activity to a whole day just because it may take a whole day for you during the week so let's say you have kids who do a lot of sports and their sports day is Wednesday and Thursday so on Wednesday that will be your sports day that would be the day that you're out and about taking care of the things that they need for their sports if you need go get some new sneakers if you need to make sure that they have snacks for as after soccer or after the soccer game that's the day that you take care of that type of deal so Wednesday is sports day for me I do day blocking for work and for the kids so the kids have day blocking because they're homeschooled so we do have a day where we do a review day Thursday's a review day that would be test day so if I want to give them a pop quiz it's usually on Thursday need haven't god bless my kids they still haven't figured that out that I assigned a day for pop quizzes but yes that's a review day for high school but Monday for me is writing day for the blog and my newsletter and anything else that I'm working on so this is important for me because I work at home I need days assigned to what I need to do Tuesday is editing day so if I need to edit video or pictures that's done on Tuesday oh and so on and so on so they have scheduled days for high school I have scheduled days for my work it's it's the only way I can get it done yes Larissa you do like just the day just to write because what happens is vloggers we go oh I need to read that blog post so let me write it and then I'll take the pictures and then I'll edit the pictures and then I'll figure out the syndicate it's just too much for one blog post and we get overwhelmed right if you have a writing day you just write that whole day don't worry about pictures and other other mess and syndication you're just right right your recipes that day right Courtney that day is what you when you're writing the recipes it doesn't even matter if you have the pictures ready to go yet right the recipe right right the synopsis of the recipe right the story about hunger that's on that writing day so that's how I get stuff done you guys ask me all the time how do you get everything done this is how time blocking day blocking now here's the deal lately I've had a lot of things come up where my time blocking when I day blocking hasn't been working out for me so I hacked I had to change it I had to change up what I was doing so writing day wasn't working because I was doing a lot of video so really I'm writing day I needed to be doing more video so I needed two days of video or I need a two days of editing photos and video so I had to change things around with the kids it's the same thing it's getting warmer outside so they need more of a day or time actually hours in the day where they're allowed to go outside a little bit more so I had to check had to change the time block they couldn't be in the house in the afternoon doing their work because it's nice out so we had to push the date up where there started work a little bit earlier so in the afternoons they can spend time outside with their friends so that's how time blocking works too when it comes to your family I just suggested my last night did you see any the thing about time locking is that it helps you stay organized but not frustrated because you can move it around it's adjustable for you and you don't feel bad about doing it so this is this is what I'm going to talk about today because I feel like you guys if you if you're not doing time blocking yet this is a perfect time to do it it's Monday it's the middle of April so you can give it for the next couple weeks you can try it out and see if it works for you and then you can readjust in May to kind of make it more solid for you we do an adjusted adjustment in the summer we are outside long I need just Alice yeah I see Alice Alice gets it she totally I just love her but yes this is I feel like this is the perfect time for us to discuss this so this is my challenge for you for today I want you to sit down and really think about what do you do each hour of the day and you don't even really have to sit down you can just go for for right now think about what time you woke up this morning to right now what have you done so far write those down write it down per hour I don't want to do this hour to I did this hour 3 blah blah blah blah blah and then for the rest of today at the end of each hour so at 12:59 just come over and write it on a post-it note oh within that hour I did this this this and this okay so then oh yeah look Alice all the time is what we do my scopes everybody gets homework because I don't play that and then tomorrow I will be coming back and saying who did the I love to teach and I love to make people do things so this is what I want you to do today I want you to really figure out what you're doing if you're not doing anything that's okay don't get down on yourself just go I was busy with the kids for about four hours today every hour they needed me to do something right and then around four o'clock I finally got a chance to do things that I needed to do like I cleaned up the house at four o'clock or I sat down to type an email at four o'clock write it down don't feel guilty about it right now don't do any of that you're just figuring out how your day works okay and then from that you can look at it at the end tonight you can sit down and say oh wow I spend a lot of time doing that if I just dedicated one hour to really focusing on that thing for one hour do you think I could get it done instead of doing it little by little within four hours when email just one because yeah all right because kids so really you can within that met our Larissa you can mark off ten minutes within an email and then the 50 other ones minutes is for the kids because kids Oh children but yes this is gonna be a great way to see what what exactly am I doing with my day and we do we need to keep doing this it's not something you can do once and then have it be the same all year round because people change your your responsibilities change your kids change my responsibilities have changed lately because I am launching basically two classes simultaneously so I haven't been able to do a lot on my blog and I've been doing almost the bare minimum but a little bit more on my block on my actual blog because I am watching two big classes at the same time so I needed to focus on creating the content for those classes instead of focusing on writing a blog post editing pictures for the blog post doing video blah blah blah blah blah so oh ya know I'm crazy that I'm not amazing that that's very nice of you to say you can take amazing take that out and then put in crazy okay you don't know how blows it because we're crazy Amy that's how we're insane we are insane people and then on top of that I've been traveling so I really need it to be very strategic with my time blocking because some days I'm not even here to do the day blocking and the time blocking that I have scheduled right so I'm okay with letting things go I'm okay with my blog not being updated three times a week like I like it to be three times a week is like my pleasure place but I've been working on other content so I don't feel bad about it because I am still creating same thing with my kids we used to do a lot of baking it's getting warmer well now it's not as cold again but we had to stop because it's warming up the house but I needed to figure out within that hour what else are we gonna do if we're gonna be baking what else can they be doing they could be going outside so I can give them an extra hour of outside time right if smoothies take like five minutes baking takes a long time which it which makes mommy happy because they have to measure and they have to mix and that's like it it gets them out of a space they have to read baking is just so much it's so much fun when you're a home schooler because it takes up a lot of time and they're busy and it's okay if they make a mess because they just clean it up after older kids yay but again we couldn't do that anymore because it's warming up the house is already hot outside so what can they do they can go outside right so I had to adjust accordingly right so that's really what it is it's you figuring out first off what do I do every hour of my day and then from there you're assigning yourself things to do within that hour and that helps you not feel overwhelmed and it helps you feel way more organized than you think you are because we all think we're disorganized right no matter how organized you are you still think you're disorganized this is a great way to make you feel like I accomplished something today I did something today I actually used my hour that I assigned to myself to do the thing I'm so will be doing within the hour right you can end your time block when you want to you can end it at 6 o'clock in this beat have free family time where it's not scheduled you can schedule it up to 8 o'clock or if you want to include getting the kids to bed and getting yourself ready for bed and then from 8:00 on is just when you do whatever you want to do it's really up to you the key is that you are setting up time for you to do the things you need to get them that's all it is that's all time blocking is so that's all I wanted to talk about today and I wanted to give you homework because it's Monday and you know why not why not give you some homework do you guys have any questions about time blocking how to create your own time blocking if you need help with that I'm here I'm here to hopefully answer if I can you doing this today yes Rishabh you're gonna be like a powerhouse you doing so many awesome things just imagine once you assign your hours what is this my Netflix time okay so my Netflix time is assigned after 8 o'clock I'm not even lying to you that's why I said you can end your day at 8:00 that's when we're done with the kids at 8 o'clock like done you go to sleep or you lay there until you fall asleep mom and dad will be watching our Netflix binging so don't bother us eight o'clock Netflix time or Showtime depending on the day like fixer-upper is Tuesday in the Tuesday show for us so we will be up watching fixer-upper but yes working full time my first night as I was a dedicated to that exactly yes yes Amy exactly that's why I said even you can even use your time walking for work to like within one hour at work what can I be doing work wise so I'm not doing that again at one o'clock or a two o'clock one you know I'm winding down for the day and you'll feel more productive at work it you won't really be doing you running around you know I remember working the 95 I feel like I was always running around doing stuff but I didn't feel like I was accomplishing anything and I wasn't assigning time to each hour of my workday so it works it works at your at 9:00 to 5:00 to see if you see how that works - Amy if you're looking like you're not getting anything done once you write it down you're like oh shoot Oh like that was run around the circle day maybe if I would have sat down and then did that one part of that assignment I would have felt a little bit better but yeah it works for 495 - exactly putting out fires that's all you feel like a chicken with his head cut off at work I remember those days they stopped because I thought I was never getting anything done ever I would come home exhausted and think about my day and I'm like uh what did I even do like I'm so tired but what did I even do what was productive today uh yeah yeah I don't know if I could ever go back I could go back to a nine-to-five I would just it would have to be like time blocked this is what I need I missed the first part did you talk about any apps or is this Paris paper better I like paper when you first start off because it's making you sit down and actually think about what you did so when you're in your preliminary time blocking where you're trying to figure out what you're going to block within each hour start with paper you can even start see I will post it post kids make me happy if you put a post-it for each hour two hour one write down everything you did an hour one take another postage write down everything you did an hour two and then by the end of the day you'll have eight hours stacked on top of each other and then you can even late like post them on your wall and see where there's correlation all right well I did that one thing five times in five different hours that's cray-cray I should've just picked one hour dedicate it time to that one thing and then moved on to the next thing okay you have it to myself baby all congratulations I can't do apps I need paper about it big web I see and I don't mind apps if they work I do love I love paper when you first start out doing anything anything just because your brain works in such a different way when you actually write it if I think it's your brain solidifying the idea of you taking care of that thing and telling you it's okay to let it go from your brain right now because you're putting it on paper but don't worry it's in the back and it's not overwhelming you were frustrating you because that's it's a it's not a nagging thing anymore cuz you wrote it down abs don't do that for you after you type it in and still your brain because it's kind of like playing a game you play a game that doesn't really help you forget it's just I don't know I like writing stuff out I use Google spreadsheet but I need to see it and make it right Courtney yes do you have blog posts on Thai blocking I think I think I might if I don't I can easily put one up because we just talked about it today and I can type one up but I think I do have one if search and see if it's on there if you go to for hats and frugal comm and search time blocking if not I will put one up this week I have it in my kitchen I'm there every day all days um yes Courtney I'm pretty sure you're there all day every day awesome cook Courtney sweets calm if I can I get interrupted by client should you go to the next item I'll go back to go back to it within is the client taking up the whole hour that's an important thing if they took up the whole hour then you move on to your next hour what do you have scheduled in the next hour can you push that back this is what time locking is awesome because you're just gonna push it back to the next hour and then you can see something that you may be able to assign to tomorrow's time blocking right there's always something where you're like that isn't top priority today I can put it in tomorrow's our three and I'm okay with that right so if they take it at the whole hour yes if they're not then utilize the rest of the hour to finish up that project if you can if not put it into another time block for the next day or later in the day that must be done today that's the best part you can you figure out what you keep what you want to do you don't have to get frustrated over it just figure it out hey Patricia how are you any other questions you guys I'm not gonna keep you I know I came on a little bit late today so I was doing with periscope things Parris storming sessions so but I wanted to make sure I kept on here because I feel like you guys need to do this today it'll make you feel more accomplished at least for this week and hopefully for the rest April you're good we'll watch me play yay okay great Patricia it's good to see you by the way do you keep things the same Monday through Friday I keep my time blocking the same for the most part I know what I would like to do within each hour and I push myself to do those things within each hour like I have time blocking for our homeschooling they know that their independent study hour is when I periscoping we've worked on that so that way that's one although sometimes you guys see my daughter walking in when she's supposed to be doing independent study but yes we try to keep to that as much as possible what about weekends weekends are free range we do whatever you want I don't work I try not to work on the weekends I made with Sunday night just to kind of get my day going I made my week going like scheduling syndication and reviewing my editorial calendar for the blog and for here periscope but that's when I'm not dealing with the kids like the kids already in bed my husband is chilling I can spend an hour getting work stuff done I don't do any more than that but weekend's a free range we don't schedule weekends that's just weekends or when I get to sleep in so I'd rather not time block my sleeping in I'd rather just do it so yeah mostly Monday to Friday that's what we do Monday through Friday any other questions great questions by the way Provo severs what's your first name I don't think I clicked and saw thank you for the heart seat they match they match my dress so cute really yes look I that's when the kids get to do their minecraft stuff hi Rachel that's when the kids to get to do their minecraft stuff um I review their iPads too sure that they're not spending too much time on certain things I may even add a new game we may go out somewhere and I don't want to be stuck in a time block because if we go out and we want to be out all day then we just add all day so weekends are free-range your whole life is free it is Larissa and that's why we love you we love free-range Larissa because she reminds us of all the things we can still accomplish if we don't have a very tight schedule or the things we don't accomplish like when skittles just wants to get on a scope and talk and talk and talk those are the best ones that way I love her she is so cute any other questions you guys are you laughing free-range Larissa that's your new name I love it although you're gonna be time lucky now so I won't be able to call you that because it won't be true you won't be free-range learish anymore all right guys I'm gonna let you go it's 11:45 I'm gonna go check on these kids cuz their hour of independent studies almost done I want to make sure they actually did some things and I need to get started on my day look I still gotta do my to-do list I haven't even written it I know what I need to do but I need to I need to write it down so I'm gonna do that too but I will see you guys later tomorrow I am actually gonna we're gonna talk about my fashion capsule because I have an update on that as well you too Rachel thank you so much for popping in so I want to share with you guys what I've changed within my fashion capsule things that I've had to let go don't you hate when things get holes in them that's just a side note but things I've had to let go and how I am incorporating something called litotes into my fashion capsule and how I'm actually making it affordable so we're gonna talk about that tomorrow we're basically talking about changes all week things that have changed in life and how I'm handling it without spending a million dollars so tomorrow is fashion capsule day so if you are curious about fashion capsules people keep about it I will explain what it is I will tell you how it's changed with my spring fashion capsule and what I'm planning to do for my summer fashion capsule so we're talk about that tomorrow but I don't want to keep you any longer thank you so much for tuning and I will see you tomorrow 11:00 a.m. Eastern Standard Time if you're not part of our Facebook group yet I would love to see you in there thank you look larisa eyes look look Lois is my girl do you guys know how much of my girl Larissa is like 100% look at that I'm slaughtered all right so I'll hold it out but she just put it up there so this is our group a full life unless if you got a bit ugly slash full life unless you can join us in there we are having a blast we're gonna be talking about Mia play Monday today cuz it's Monday and we're gonna share what our meal plans are when we talk about a whole bunch of stuff but it's basically an awesome support system so if you're looking to live a more intentional life a full life on less money we are there to support you so make sure you come and join us ok leaf left full life online so hopefully we'll see you in there otherwise we'll see you tomorrow 11 a.m. Eastern Standard Time thank you so much for tuning in I hope you have a wonderful rest of your afternoon a wonderful evening and I hope you continue to live your full life unless bye my friend have a great day

Please explain how to steam and eat an artichoke for weight loss, tea, dresing i lorentix

to my channel today I want to show you a few things about our Ashok for weight loss remember the our Ashok is the Gustav laxative eliminates toxins and lowered cholesterol if you never have in your hands this kind of flour the artichoke we're gonna learn how can we clean and cook this for a new diet I will use the bamboo steamer oh yeah the pedals are turning and you must cut them with scissors now remove the small leaves that are close to the stem now we're gonna grab the end of the stem and you have to cut the top of the flower don't forget subscribe to my channel thumbs up follow me on Twitter Instagram Facebook and snapchat and please tell me what kind of video you wanna see on my channel with a patient of a peeler peel the first layer of the steam and then you have to cut and 1/2 you take it out the little hairs that you see on my video you can use a knife or a spoon to clean it up and you're gonna wash with fresh water it's time to cook the are choked in the bamboo steamer I put water in a pot now we're gonna steam for 15 or 20 minutes please take a minute to read the benefit of the other shade now I want to show you how I cook the artichoke in a macro way place water in a bowl with a - oh and cook for 15 to 20 minutes then separate the water and you have to drink a glass of this water before each meal I personally like to eat them with resin of olive oil lemon and salt and of course I'm sure my food with my pup her name is candy and she's a coton de tulear please follow her every Saturdays here on my channel the RSU is really good for dogs if you cook it and don't forget watch the last video see you next time bye bye

Please explain how to replace garbage disposal garbage disposer & gasket! insinkerator! sprig barton in-sink-erator

hi Sprig Barton here! I'm gonna show you how I replaced InSinkErator gasket this is that this fits inside the sink. mine had come apart I got a new one she had to replace it and this is my instant return you can see this thing is gonna be emptying out under the sink up well they teased me with it but it worked Don't lose this You're supposed to have a bowl to put all your stuff in so you don't lose it! Water is off, Power is off. see this this thing has to come off, I don't know if its gonna drop down or what. maybe I should put something under it. I'll put this under neath it in case it starts to drop down and I can't stop it. cool pull Wembley simply unscrew that and it dropped right onto the basket thing I had. let's get the camera over here and the light. to stretch over well we got off here stretch the gasket to make it fit and Bob's your uncle! my god it weighs a ton! need something a bit stronger under there maybe OK that's quite good, its almost there! Oh fooey, Duck! I can stick something under this like maybe that loosen it and I did it! oh that was hard I'm sweating... before I tighten it make sure this is the right way makes me want to rest so, if you need your insinkerator replaced even if you've got muscles its a bit difficult see into the sink there, got it! so that's as tight as I can get it let's not turn the power on lets check water goes through I can feel it in the pipes so it must be OK power show awesome! I hope you watch some other of my videos thanks for watching me replace the insinkerator gasket very simple instructions right instructions are turn off the power after disconnecting the disposal from the plumbing simply, simply twist off the mounting ring number two lower the disposal and replace the worn gasket number three lift the disposer back into position and twist the mounting ring back into the lock position

Please explain how to make a paper water lily flower

hi I'm Shannon I'm gonna show you how to make some paper flowers using your Cricut so I've already cut out my paper layers with my Cricut and sure cuts a lot and first I'm going to decorate the middle of the flower so that it has time to dry so I'm spreading a yellow ink on the purple paper to change the color a little bit and then spritzing tattered angels glimmer masked so that's going to dry I'm taking the largest petal layer and smearing pink ink onto the petal edges and I'll do this with the second petal layer as well next I want to emboss my petal layers so I'm using my cuttlebug this gives the flower a different texture so you can use any of your embossing folders I like to use ones where the pattern is sort of small since the petals aren't very large themselves so like Swiss dots or this one or Moroccan screen look very cool okay so now I've embossed all of the petals and I'm going to fold in each one of these petals from the center and I just use the nail or the tip of my finger to pick the center of the petal and then bend it and with card stock it's pretty durable so you don't have to worry about ripping it I'm just going to do this to the two larger layers and now I'm gluing them together i glue the second largest to the largest and then I'm going to take the next two petals that are the same size and I've curled in the petal layers if you want to and glue that to the flower and I just want the petals to overlap the spaces from the petal layer below it so that each petal layer is slightly off from the one below it the next layer and now I have left the two smallest ones so just do the same thing there's one okay there the last one okay hey there you can see it I'm going to take the center and I flipped it so that the glitter is on the inside and just bend up each layer and then I'm going to glue it to the center of my flower I probably should have made the center a little bit smaller but that's okay so there's the flower I'm gonna decorate the edges of the petals using a zip dry glue I'm just gonna brush each end of the two bottom layers with a little bit of glue and then I'm gonna sprinkle it with some pink glitter and I just like the effect of the glitter on the end of these rather long petal layers and I use them I collect all the excess glitter if another piece of paper below it so I can filter it back into the petal thanks for watching

Please explain how to cook great food sesame oil wok

welcome to how to cook great food calm welcome to how to cook great food calm today we're going to be doing some stir-fried duck with some sesame oil soy sauce a little bit of sweet chili so as you can see in my what is fired up I put a little touch of oil in there I'm going to add a little bit of sesame oil now not too much without a bit more later so that's the mixes of regular corn oil and just a touch of sesame oil which gives it a fantastic nutty smell but you can see this is smoking like a Gooden everything we do in the wok is a really high heat so make sure this is happening okay I'm going to drop in now some garlic ginger chili some white onions and some celery we're just going to stir those up for a maybe one minute I've got some strips of a duck breast we're going to use no clothes just fill it it beautiful meat one weight as well just going to drop now a little bit of five-spice the wonderful mix Chinese spices put a nice aniseed smell coming out there okay let's go for our duck there we go here she goes beautiful long strips of fantastic wing so to meet that ok so just keep stir frying this don't take you out this one moment let's give this a like three or four minutes never take a look the eye that's been on three or four minutes as you can see it's changed color it's still not where I want it to be though we're going to continue cooking this but I'm going to add a little bit more a beautiful sesame oil I want to just Brown this up a little bit now this is that I'm gonna get it slightly crispy you'll get quite a moisture out that as well you can see there did you get rid of all of that this will just evaporate while you keep stir frying so let's go back in about three or four minutes let's see how she's looking then okay this is a lot nearer way I want it to be as you can see the way she's left the tan I've got a few bell peppers or capsicum or sweet peppers how do you want to call them this is that those now just add a little bit of sweetness and some color now I've got some soy sauce I'm using light soy sauce not a very dark one oh wow what an amazing smell this is all happening on a very high D incredible incredible okay now I've got some sweet chili sauce just get some of that in there you can get this in most Asian stores if not look on our website there's lots of places to get it I'm turning the heat off I'm just going to let that give us a sweet sauce and that's Lloyd cover this view sesame oil chili garlic ginger duck me there we go ready to serve here we go then beautiful beautiful beautiful duck fill it I'm actually going to taste a little bit now oh wow the sweetness of the chilies fantastic the five-spice is really coming out this is amazing easy to do as you saw we'll see you next time take care bye bye how to cook great food calm don't forget to subscribe to our channel for more information take a look at our website wwlp.com

Please explain how to make decorative paperclips bookmarks /diy paper clip embellishments

thanks for today I'm going to show you how to make some embellishment for a smash book so I love making these clips you just make them from regular paper clips and you can add your own embellishments on them it's so easy and they're so cool and I love putting them in my smash book so I'm threes a couple that I already made or more than a couple because I went kind of crazy so I'm going to show you several Styles today so I'm just gonna stick those over to the side and we're gonna make some of these together so here I just have a stack of scrapbooking paper and I have tons of little embellishments I have like some flowers um some jewels some ribbon some labels he's only labels that I got I think I got these from Target yeah just all sorts of stuff so we'll take it one at a time for this you're just gonna need basically need scissors embellishments and you will need some type of glue I'm gonna use my jewel it but you can use whatever you like and you'll need an assortment of paper clips okay and again I got these at the dollar store okay so let's start so first one that you first I'll you can make is with buttons I really like these these are cool so you just select the clip that you want and you apply some glue right on the back you don't need to oh not that much oh my gosh overflow oh please some of this on some more buttons oh my gosh okay yeah you want to be a little bit more gentle and I just was okay then you'll take it and you'll put it right in between the little crack of the of the thing now it is gonna take a while for this to dry you couldn't use e6000 and that would be great so I'm just gonna take that I'll set it on top just like that and I will allow this to dry and it actually does stick it's just not doing such a good job now but you can absolutely use um e 3000 and that would look great too okay so let's do these other two maybe I'll do a blue but I just like using the colored paper clips but you can absolutely use whichever kind you'd like okay alrighty so we'll put that aside to dry and they take only about ten minutes to dry and they work pretty darn well okay then we'll do the same thing here so I'm just gonna kind of spread that glue out and again I'll just stick that over to the side to dry okay alrighty now for this next one I'm going to actually use tacky glue we'll just kind of okay so then let's say that you wanted to use these labels which is super actually I'll show you this first so I got these little jewels at the Dollar Stores which I have a little bit of glue on there I'll show you and all these do is they have flowers butterflies the colors I just think they're so pretty so you'll just take out a selection of them and again you'll take your paper clips I tend to use the larger paper clips just because you can hold more stuff but you can use smaller just kind of use whatever you have it doesn't really matter okay so I can kind of just use my finger and take that off and again you're just gonna set the paper the paper clip right on top now if you had an e 6000 it would set quicker so just kind of keep that in mind okay but this is Eileen jewel it so I'm just gonna set that right on there just like that and then I'll just put it oops and then I'll just set it just like that set it down and it will dry I promise that's what I did with the other one so trust me it does work okay with this kind of glue okay you can put you can do another one just like that and just put your glue on and set it so just like that okay so you get the point so you can definitely go to the dollar store and get that kind of stuff you can use vintage buttons you could use charms to like one of these as a charm like this is a charm but I used so you could definitely use that now let's move on to the paper stuff okay so I'm going to kind of look this over for paper there's lots of different styles that you can do so if you want this is just a piece that I cut out from before now with this one I could just take my scissors and I'm just gonna make a triangle shape okay just like that and then I'm gonna even up this back part just like that okay and then I'm going to and I also have a sting or two I forgot to mention that then I'm just gonna take on my paper clips whichever color you want and you're just gonna stick it in so you don't want to do it on the end that folds out like that you want it on the other side if that makes sense okay so on this side here so you just like scoop put the paper through and then you'll fold it over just like that and then at this point because you have these little tail things hanging out I just take my scissors and I just trim it up okay so I'll just take my scissors and it'd probably be best to use precision scissors normally I have those I don't know what okay so again we're gonna do that long side there just like that do that and you'll just take your paper clip your stapler and you'll staple it together okay and you have a beautiful little clip and then if you want you can add a jewel like I did with this one and I just used tacky glue and I adhered it looks totally cute okay now if you want to make like a banner style okay they can do that too so you'll just take a piece of paper I'll cut it down maybe about an inch and a half or two inches okay and you'll just fold it in half just like that okay and then I can just straighten it out a little bit if I need to and this would be a great way to use your decorative scissors like you can do a decorative edge on there but I just kind of want to show you so you'll make a I cut from one corner and then you'll do the other cover of their corner too just like that okay but see you have a little banner style there I mean you can take your paper clip and again we're not going to use this side because it'll slip right off we're going to use this side here that's fully covered okay just take it and you'll slip it right on there just like that okay like so and then you can use glue for some of them I use glue and sometimes I used my stapler I think the stapler is faster and you can use them right away so it's up to you it's your preference but if you don't want a big honkin staple you know hanging out of everything definitely you could and you could cover it up like on top of this I could add a jewel which would be beautiful so see and that's really pretty actually so I could take my techy glue which I have here I always keep it upside down when I'm working okay just to make it a little easier to come out and then I can just stick my embellishments right on and I can just set that aside to dry but look at how cool that is okay all right let's see if we can make another style so for this one let's use this and this is some altered paper that I made from acrylic paints so you can totally check that out and for this one we're actually just going to make just a basic rectangular shape okay and then I'm going to fold that over but before that I'm going to select the labels that I want so I can select whichever kind of label I want and these are perfect these little mini labels okay and then I can select whichever kind of clip I want righty just like that and I can slip it through just like I did before okay but I turn it the wrong way okay like so okay and then I can take my stapler or glue whichever one you have the other ones I did with glue I'm so this one I'm going to do a little different and I'm actually gonna just clip it right in the center because I'm gonna put the label right over okay there's that and then you could write a message on it so you could write a message on your label not even a long enough piece of paper but I did it so you could do notes you could do just kind of your journaling today is or whatever you want on there but it just makes a cute little embellishment and then if we wanted to we could just cut off those ends those edges there good cut it off a little too much there okay and you have a little flag now I would definitely use glue just to make sure that that adheres better but you can see how that turns out okay so that's another way and then for the ribbons let's see what I like to do and then I just have a whole bunch of embellishments here so actually let's do another paper one let's do a nice time so we'll take our green just do the cut fold it over just like so let's try to do that same kind of design okay just like that good I'll take this just like so bring that over you're given us stapled okay let's say I want you to do a flower okay it's the same kind of thing okay so I'll just grab my word maybe I'll use this orange one here okay you're just gonna put down my glue just like that I'll put my flower on top just like that and then I can get on a little embellishment and actually the spar is a little too big so give it a clip here okay just because I want to be able to see just a little bit of that paper okay just like that all righty and then I can take one of my a jewels like these are pearls and rhinestones but use whatever you have and those are always on sale and my goals are Hobby Lobby okay and you can take him and put him I use a lot of these for my card-making so there we go and you can make your own fabric flowers - they're so easy to make good see how keep that one is so that's another one that we can make okay and then let's do some ribbons okay so here I just have some pink ribbon maybe I'll do this one I'll do Elise take this kind so you're just gonna cut it maybe about a few inches okay I'm gonna put some white in there - okay just like that ready and then I'll do I think paper clip those are primarily what I like to work with so all you're gonna do is you'll take this just like that you'll loop it over and you'll put it through one end of your paper clip alright and then you just bring those tails through okay just like that okay and then you can trim it down as you like but I kind of like him long I mean I'll give it a little bit of a trim and if you want you could do your fray stop here or you can burn the edges sometimes I like to even put just a dot of glue just to make sure that it doesn't go anywhere okay so I just kind of take it just to make sure okay that it kind of stays together that way I'm not always having to pull it up or anything so and this dries clear the tacky glue so you don't have to worry but there's another cute little ribbon embellishment that you can do which is totally cute now if you wanted to you could also do it another you could also use these guys which they're just little punch-out hearts I have a bunch of different shapes okay so they come in a bunch of different shapes and I can just take that okay and I can just take my heart just like that right and I can just put the paperclip in the back of me for it to dry okay and you have a nice little cute heart embellishment and you can do those with those inexpensive punches that you can get at Michaels and knows it would totally thank you now trying to think if I had one more to show you oh maybe one more ribbon I can show you another way of doing the ribbon so if you wanted to do you could just cut off maybe about an inch or two of your lace right take your little guy here okay just like that and you can just take it and you can tie a knot just making sure I'm in frame there okay so I'm just making just an easy not just bring one in through the other and I'm just gonna tie it off okay just like that you kind of want the tails a little even okay just like that okay and then I can take one of my embellishments I'll do pearls they're my favorite as you can tell all righty I'm making put a dot of glue right there and then I can put my curl line just like that okay and you have kind of a little a cute little embellishment there too okay so those are all my ideas if you have any questions about how to do any of these you can just ask me in the comments and I will let you know I will take a picture so you can see how all of them turn out but I love these cute little paper clips and and we are going to so use these in our scrapbook and it's gonna make them unique and beautiful and you're totally going to get addicted to making these so um thank you so much for watching please don't forget to Like and subscribe and if you have any questions let me know thanks much have a nice day

Please explain how to decorate your home celebrating family part one

hi my name is deanna and i wanted to create a segment about how we can create memories and draw those memories for our children to help them to feel important and to draw our family closer together in our home we have been through the years focused on making scrapbooks and creating very three-dimensional and wonderful scrapbooks for our children to enjoy with journaling and mementos that can be tucked away but often those men momentos and those scrapbooks and all that labor it does get tucked away and those books don't get looked at nearly as often as we'd like but there are some other things that we need to do and scrapbooking is important but we can do others from a couple other things to help create and give that wonderful feeling of memories this is a picture of my mother when she got married and i went ahead and put it into a pillow format transferred this onto some fabric on with a home computer and then made it into a spectacular pillow such an easy thing to do to celebrate a special memory here when you've got a great event in your child's life or a sports event or just a great photograph that you happen to capture blow it up don't just put it away but make it big and massive it's only twenty dollars to go ahead and blow this a photo up to this size and nine dollars 9.99 at walmart for this frame simple and easy to do here's another photograph that's blowing up even larger on here on the mat this is a wrestling picture of my son pinning i put sweat determination and guts to help him remember what he's done to get to where he was and also as a memory of something to motivate him in other areas of his life too of working hard for my stepdaughter we've got went and bought an artist artist campus and on here she painted some zebra stripes we put some ribbons on there and lots of photographs and memories and quotes and things that she likes and this is a great centerpiece for in her room to help pull together that black and white zebra theme in addition we made a quilt together which created great memories and a wonderful bonding experience but this is minky fabric that's thicker no quilting required you're just piecing together squares and then putting a solid minky back easy to do and very simple up here you've got feet that you can put into a bucket of sand plaster of paris pour it in frame them make a three-dimensional art piece you can go ahead and take all of those photographs that you took of if places that you visited with no people in it and remember those wonderful trips and those expensive vacations that you took and the memories that were created there and those bonding moments in addition to that you can also use jewelry for you for your photographs and for memories you can go here i've got a little tiny picture of my three boys and on the other side my three step daughters you can solder together two pieces of glass put a photograph or put quotes or family members names to help remember them so these are just a few things that you can do to help celebrate your family but i've got one more thing i'd like to show you

Please explain how to braid a leather necklace : working with leather

hey my name is steven soria with make smith leather company in santa barbara california today i'm going to show you how to braid a leather necklace so the first step is to take the strands and tie a knot on the end so the strands are fixed the second step will be to take the knot and place it into a clamp that's actually going to be really solid you're going to be pulling on these braids on these strands to braid it so you want to make sure that it's fixed to the table in front of you once you have the braid secure you can begin the three strand braid what you're going to do is take the left strand and pass it under the center and always straighten each of the strands keep it from getting too cluttered and tangled up and then you're going to take the right strand and pass it under the new center like so again straightening the strands so you're going to continue this three strand braid all the way to the end of your necklace and you want to make sure that you keep the strands nice and tight so that the braids look uniform when you get to the end of the strand you're going to want to hold the knots hold the braids together in your hand take it out of the clamp and just knot it on the end so that your braids do not loosen up and you have a completed necklace my name is steven soria i'm with mick smith leather company check us out at makesmith.com catch you next time

Please explain how to make dry ice homemade rootbeer

look at our kitchen super cool we're making root beer so 5-gallon big guy right here jug filling it with about four and a half gallons of water we're going to put four pounds of sugar and to concentrate I like the McCormick's better but this is all that our little store had here so we're going to grab these che open those two boxes for me and I don't like to waste water and so what I'm using this stupid thing water comes down there so I fill up both at the same time okay it is time to add the sugar there's eight people in this family and yet I still do this alone cuz I'm holding the camera so alright we've added the sugar get Little Mix gonna keep this going she's helping to concentrate yep so now it calls for only one but I like my root beer a little bit stronger how about your dad's head yep this is what the dad is the expert mr. Randall said and it said this stuff isn't clear I like to get all of that out so I filled a little catching up with more water just to make sure I'm not missing any flavor so it's all in now we have another batch that we've already put the dry ice in so we've got it going in in there and it is almost ready yeah where's my phone okay so we have our dry ice use tongs because it will hurt you there we go take it and you put it inside container what look at that okay let's bring that bucket down with everything this way I can get a couple mixes to just like just for me I want that sugar to dissolve a little bit better wait break it one more time see something cool that's cool mr. Bennett I'm shaking hold on do not hold this on your tongue for very long don't try this at home kids don't try this at home burn your time but now that vaping is cool precision is cool don't bake snowball we don't bake okay let's let's finish this off let's go so one of the keys is getting the dry ice like carbon dioxide to go into don't you that one anymore every day the root beer you have to put the lids on but you don't put the lids on too much and then they'll explode how long does it need to sit a couple hours actually so look at our kitchen super cool okay so grab the lids put them on the just a teeny bit can come out think you maxed it out too much huh that's good spitting lives a little bit harder so it still seeps it out just to do it so thank you for watching our little tutorial oh thank you for watching please subscribe and give my delicious root beer you

Please explain how to glaze furniture

okay so today we're gonna do some glazing on this piece of furniture so this is already painted I sealed it and now we're going to glaze it so what I'm doing I have a nice soft it's like a t-shirt material towel yeah with some water so I'm gonna kind of fold it up so I have a nice soft area and we're gonna be using wise owls whitewash glaze so I'm gonna camp and since what we're using wise oh and this is whitewash all right so got that open I shake it up so I'm gonna take a soft brush I'm probably use a couple different brushes and I'm gonna go ahead and dip in here get some glaze and we'll start here I'm gonna work it into these little diamond indentions on here this brush might actually be too soft yeah don't like that brush all right so we have some on there have it in those places and now we're going to wipe off what's on top which will leave us with the white in the indention so you can share your towel stays down you want to kind of switch it around so I have another brush here so it's a little firmer go ahead oh yeah sounds better get into all these recessed areas and I think we'll do a larger section now I feel like I have a little more control over glaze Holika so things to remember about glazing you always want to steal your peace with whatever stealer water-based healer that you use before you put a water-based place glaze on it okay and you need to sell it afterwards too all right folk least I'm not grazed good distinction

Please explain how to prepare broccoli and cranberry salad

hi there my name is Paul Marvella pegram on the head chef at the gorge in our ol doc stayed in this video I will show you how to make a broccoli and cranberry salad the ingredients you need for this recipe are coming up in your screen now so I got some some broccoli florets here i'm going to put those into a bowl with some red onion some dried cranberries so we've got 40 grams of Bacon's i'll put that in a hundred grams of a reduced calorie mayonnaise that I put in here we'll put 50 grams of double cream in there which is going to make up for the being very angelic with the reduced mayonnaise earlier on 100 grams of mayonnaise three tablespoons of sugar we're going to mix that all together get it going through nicely make sure we got everything lovely and coated I'm going to serve that up in a bowl grape a piece of Turkey great with chicken and always great with the one you love and that is how to make a broccoli and cranberry salad

Please explain how to block field goals ! block pat's & game winners every time!

what's going on guys d-money here bringing you guys a very consistent way to block field goals in madden 17. this works every single time once you get the hang of this and i wanted to quickly shout out a member from explicit madden in smoke and big mike his youtube is going to be in the description below he's actually the member of explicit that found the field goal block so when a bunch of other people start posting it you guys know exactly where it came from it came from explicit madden now we're going to be going over the play and you want to pick the one that has that baby blue zone on the right and you just want to zone or you want to switch that player with your fastest player on your team so what i did is i picked face block right with that zone the player and i sub in dominique rogers camardi because he's a 94 speed now you don't need 94 speed in that spot but it will be consistent all that you want to do when you pick the play is press that b or that circle button and just keep toggling right on the left analog stick you want to do this you just want to move every single player to the right hand side of the field so you can see very quickly i move everybody over and then i just want to stay user onto that very far right player in dominique rogers camardi move one spot to the left and then hold in my r2 or my rt like my right trigger and then down on the left stick and you guys can see what's gonna happen is i'm gonna get a very easy uh i guess speed burst right off the edge to come in and block the field goal now yes this does work online and no you will not get false starts or you won't get offsides you don't have to time this in any way you simply have to hold in your right trigger i hope this helps you guys out do not forget to leave a like comment and subscribe if you guys haven't already do not forget to follow me on twitter and as always guys this was d money and i'm out

Please explain how to use my bath truffles

hang every lion this is mia with me as precious gift and today i'm just going to show you a quick video on how to use my bath truffles there's similar to the back bomb that you're going to place into a warm water which is what i have here like in your tab and i did some for in order so this is how the primary look they come in ball when this is the lavender the lavender are bad truffles and what you're going to do is you're just going to take it like this they're going to be hard you want to break them up and just put them in your bath water you see how this goes out and they're going to melt primarily and then you can see the lavender buds in there that's really good for your skin and you can just mix it around in your bath water until they are melt you have some shea butter in them which is great for your skin and they also have some some good skin oils in them as well and then they can also come with since like the lavender bath truffle crumbs with the lavender scent and the himalayan salt I'm can either come uncensored or you can add a fragrance of your choice but we're really good in your bath water and they're really good for your skin so I hope you enjoy bye

Please explain how to make mead - part 1

welcome to a na backyard gardening today we're going to show you how to make Mead so before we get to that though wanted to show you what I've done with my raised bed to keep Kona out of the garden so today I wanted to plant all my vegetables for my winter garden but I was a little nervous that as soon as I planted all these Kona would show up and dig them all up again so what I did is I put up a two-foot fence around the raised bed but I didn't wrap it all the way around I left these gaps in between the posts so that hopefully I can come up to my garden pull a post out and be able to work in the garden without too much trouble so I'm hoping the idea of the fence deters Kona more over than the dirtiness of it if it is pretty easy to remove but we'll see how it goes in the meantime I printed some romaine lettuce some red and green cabbage and cleaned out some nice Tomatoes I was just about to rip out my roma tomato when I noticed that it is buddy again so it seems like once the yellow pair was gone the cherry was dying off this guy finally decided to explode listen new growth and maybe even some new Tomatoes this lightly season so we'll see so today we're gonna make some Mead let's get started I live in America you know you're gonna need like a pose go ahead and stand you guys anyways just for good measure in case and the key is here that they have to sit in the star fan for at least 10 minutes right yeah something like that I think it's only two minutes that's a little off plan for the hosts this turkey baster it's so and that's all we need I got this one that's probably only got like a pound left in it I'm gonna set it on its side so I can start moving towards the top and we're gonna use up that one you got another one of these three pounds go into each batch so we're going to try and do three batches today I got enough honey and I think we're gonna run out of water first and you're gonna need some distilled water so I gotta the same thing I've been doing some patches so just got small I've distilled water but I think it's still been a little hot by us I've been using this white red start Premiere Blanc yeast that's good up to 86 degrees before it'll die so if we get a heat stuff I'd still be all right with that stuff some other time I want to do the white labs sweet means that wap-7 20 but this one only goes up to like 70 it's a yeah it goes up to 78 before it dies so I'm gonna save that for the winter so we keep a journal of all the home brews that we make so Phil's looking back to some of the previous new recipes that we've done to see what his notes were but it's really convenient because as you go through the process you have to make modifications some time and when you look back on the next home brew and you want to make this either the same modification or keep yourself from making the same mistake then it's helpful to have a record of what you did so I'm just gonna put this on here tear it out and start adding our honey all right from my notes last time I used 3.6 pounds so I'm just gonna go ahead and get into that it's about as fast as honey years but not as slow as molasses some train have to touch the rim because I don't know what's on the bottle I should be able to get out it's pretty close and don't I call that just lay it down they move a bit more this you know bring it up to like three point I think the recipe I'm using actually calls for 3.5 oops ever shot I think that's I did it last time that one down is it nine three right I'm gonna start putting in my water just bring it up what are you doing with the drill so you got to mix all this I used to either shake it up or stir it but then I found out you can use these pinks burgers just in there sanitize it first that's the key [Applause] and then I usually go for a couple minutes because if you incorporate oxygen into there then the yeast will be happier and it'll form a group so I'll just go so I'm just gonna cover it up real quick I'll put a note on it that is number one so that's one down so we're gonna go quickly through the next two that we're doing and then show you how to add the yeast at the end so there you have it means three four and five so we've made two meats previously with flavoured one as a strawberry mead and one as an orange Mead so to keep our record straight we're doing three four and five and next we're going to show you guys how to add the yeast to these mixtures I just want to point out here we took Kona to training so even though we say things like Kona destroyed the garden or Kona is not behaving we've done training with him he's just very stubborn look at this floating thermometer why do you need the thermometer to activate the yeast you have to get this water to like the perfect temperature so we're going to measure that and make sure it's all good yeah we're at 160 that's safe okay we'll give that a minute to cool down so what is this this is a refractometer that does the same thing as here what do you call that thing hydrometer the hydrometer yeah except you'll need like a dropper to of your sample instead of a whole test tube which will really help because we're only doing one John batches I wonder I think you can see it you're just gonna get really bright light put it in here the levels a potential alcohol content all right drain it the sugar content the specific gravity with respect to water once you know it there it is okay so really hard to see but what will happen is that a blue line will creep up this once he actually put a sample in it and then that way would you read the specific gravity of the sample pretty easily Kona you're on a cookie 101 and I bet you by the time I get the when I said we using this red star Mir Blanc white wine yeast that wants to be at 95 to 100 degrees and it says one of these will do five gallons but I've always done because I don't like doing the math like weighing about by grams I just do a half of one per gallon so I'm gonna go ahead and throw one of these in there actually I should be able to just do that right because it does five gallons so it's been about 20 minutes and I ended up putting like a drop or two of honey in there and we're starting to get bubbles that form we're on our own from the yeast so I think we're ready to put that batches third smell start with number three visions music see ya I'm just dispersing I can't get it on the camera but you could definitely tell I probably infected it yeah oh yeah you can't see it that's really cool all right they shouldn't need a mix third batch number three first test batch number three couple jabs then oh man but off the charts what they're eating 1.35 is that's way out there let's see if I can grab it on the camera yeah you can see that pretty well so it is almost off the charts which is pretty cool maybe we can convert the scale on the left let's add about 30.9 bricks so let's see what that converts over into okay there's a line on the airlock that indicates how high the water ought to be yeah nice sanitized and that's it we're going to put airlocks on the rest of the batch s here and set it in a cool dark place for what about a week so we'll check the specific gravity as we get closer to a week or two weeks see if it reaches our target specific gravity and that'll tell us how much alcohol content there will be but otherwise we'll go into a secondary fermentation after that and that will be the flavor of the Meads so it could be anything from like a strawberry mean to blueberry or we've done orange in the past or cinnamon even there's a wide range of options but we'll give you an update once these are ready and hopefully this really helped you to understand how easy making your own batch of me can really be so hit the like and subscribe buttons below and we'll see you guys in the next video

Please explain how to use a sander : hand sanding

Hi, my name's Kevin, and on behalf of Expert Village, I'm going to talk to you about Hand Sanding. Hand sanding is to be done after you've done all your machine sanding. Generally, I'd would say, you'd machine sand up to about 150 is a good grit. From there you either can just take 150 hands sanding to there or up to the higher grits; depending on what your particular project is. From some, nice little jewelry box or something you may want to sand it up to a higher grit so that it's really, really nice and smooth to the touch. But if it's for something such as cabinetry and that, you just want to give it a quick buzz with the hand sanding on a 150 grit and move on. Right here we've got a piece of plywood that we're going to sand. What we're going to do is have a piece of cork which is a really good backer for sandpaper. What we're going to do here, is we're just going to go with the grain as you do anytime you're sanding. We're just going to clean out all the machine marks if there's any in there. Basically we're just giving a good scrub down by hand just to ensure that everything is nice and smooth and we've got all the machine marks out. This higher grit on the hand sanding will reveal, in general, if there's any machine marks left; if there are we can deal with those as need be. It's important to remember when you're hand sanding, nice big, long strokes as I was just doing there. You always want to keep them as long as possible so that you're not just focused on one little area. Just nice long with-the-grain strokes. Also, important to remember, even though it's hand sanding it doesn't seem like it's creating that much dust, it's really important to wear a dust mask. It may not look like it but you are kicking up a lot of really, really fine particles, which are the worst ones to go into your respiratory system. You definitely want to remember to wear a dust mask when you're hand sanding as the final step.

Please explain how to make homemade pizza ~ mirthee pizza cutter

hey cooks on the show today we're going to make a supreme pizza and we are going to try out the murthy pizza cutter one of Eric's favorite foods is pizza and we have made in the past some bread machine pizza dough and it's great for making homemade pizza and I have a batch of that ready to go we're going to make some pizzas we're going to cook them off in the oven and we're gonna try out this pizza cutter so join me as we make supreme pizza you so I just want to take this opportunity to thank Murthy for sending this pizza cutter Pizza cutters are great you can use them for all kinds of stuff you can not only cook cut pizza with them but you can use it to cut pastry pie dough you can use it to cut sandwiches and you can use it to cut herbs it's very versatile and to be honest with you every kitchen needs to have a pizza cutter so let's see what we have here nice whoo I could tell it's very sharp Wow so this is our Murphy pizza cutter and what's so great about this pizza color I think is it's very robust it has a really nice handle you can do some nice cutting you don't have to worry about you know that it's loose this little cheap thing it also has this right here which is like a handguard it keeps your hand away from that sharp blade that is definitely a plus but one great thing about this pizza cutter it has this wide gap between the blade and the arms here I had another pizza cutter that was really narrow in between there and it was impossible to clean that thing with this big space in between there water can flow soap can throw flow through there it makes it a lot easier to clean definitely easier than the one I've used in the past so this is connected by a rivet and it doesn't really wobble around it's a nice and sturdy blade I don't want to touch it too much because it's very sharp but it's also made of all stainless steel thanks for sending this I'm looking forward to trying it out we're gonna do that right now we're gonna make some homemade supreme pizza so let me get the dough out I made it on our bread machine if you'd like to take a look at how I make that I'll leave a link in the description to the recipe so let's make some pizza okay so I have my pizza dough out here this is actually a double batch so we have enough here to make two big pizzas or four smaller pieces right so I'm gonna cut this dough in half this is just a bench scraper this is from chefs planet some people ask me about this thing because it's like a very big one so bood you want like a large pizza you want some small pizzas what do you want okay so I'm not one that can flip pizzas all that great so when you're rolling out pizzas one of the things I can tell you is when your dough is really elastic it will snap back so sometimes you got to roll it out and let it rest a little bit you can toss it other things that tossing it does because it pins it out through the middle a little bit and so it's a little thicker on the edges and a little thinner in the middle I won't try that too much he thinks he's so funny I actually think I want to make a couple smaller pizzas mainly because my board is that was so fun more manageable for me to make smaller pizza whoo look at that boom should I toss it up in the air no you can make your pizza round you can make your pizza square you can make your pizza whatever you want it doesn't have to actually be round you want it rustic you just want to taste it do that maybe sometimes you can just go like this just like that there's your pizza have to be exactly round boo whoo BAM right YUM this is gonna be a yummy pizza yeah so let's get our toppings so we're making a supreme pizza that means it's got everything on it right we have sauce yeah we have cheese Eric's favorite we have sausage pepperoni mushrooms olives bell pepper and onion so we're gonna start off by putting a little sauce or a lot of sauce you like a lot of sauce food okay and I'm just spreading this out with a spoon a spoon you laughs I give you a lot of sauce mm-hmm and cheese you want cheese boo no you can put cheese on the top this is how I make pizzas you can do however you want hmm don't look like a pizza huh Pizza Pizza okay you want some pet sure that's pepperoni yeah I'm right so these are sticking together and I usually go around like this I worked in a pizza parlor for like four years when I was in high school so Eric asked me if I know how to make pizza and I was like uh yeah I made like a hundred everyday for four years I give you a lot here but sometimes if you put too much toppings it's not gonna cook all the way and you got to move the toppings around okay how about a little olive sure it loves olives they look like pizza um what else do you want bell pepper how's that look want some onion you don't really want to put the onion on the very top because it's gonna burn Wow I think that looks like a pretty pizza for our pizza cutter mushrooms gosh he's greedy I cooked these mushrooms I don't know why I like my mushrooms cooked on here how about some sausage I cooked the sausage - mm-hmm you want a little cheese on top for good measure so we're gonna put this in the oven I have the oven up at like 450 if you really want like a really super thin crust with that like wood oven fired you can kind of get that in the oven if you use a cast-iron griddle or something like that a pizza stone crank your oven up as high as it will go we're just gonna do you know 450 isn't a moderate heat 450 is a pretty high heat but I rolled the dough a little bit thicker because that's just what I'm in the mood for so let's get this in the oven and we'll have us a pizza so I'm gonna make my pizza in because I only have one of those pizza pans I'm just gonna make mine on a sheet pan so I have my dough rolled out here and that's I putted me some parchment paper on here just because this isn't perforated like the other one is so um I don't know I just felt like I wanted some parchment on there so we got some pizza sauce and mine is going to be a cheese free pizza because I'm allergic to dairy so I love making pizzas and let me tell you oh I don't know about where you live but pizza around here has gone so downhill that you really have to make it yourself at least around our area because the pizza around here is really really bad I don't know what's going on with that but yeah I prefer just to make my own because I can put the amount of pepperoni I want the amount of sauce that I want and cheese and all that fun stuff hey god forbid you earn points towards a free pizza and they actually make that free pizza right yeah I went to a local chain pizza restaurant and they had this thing where you earn points when he buys so many pizzas you get a free one and the free one I got was absolutely hideous there was no sauce on it there was there was nothing on it it was it was embarrassing free of toppings free of sauce it was it was really bad and a little bit of pepper mine not a lot just a little bit and some onion onion some mushroom yeah and some sauce odd snausages how about sausage yeah I am doing this just with my fingers guess what that's what they do how they do it on your bed your pizzeria they do it with their fingers okay this is gonna be ready to go in as soon as the other pizza is out so um when it's done we'll take it out and we will try out the pizza cutter so both pizzas are out of the oven they look fantastic this is Eric's with cheese this is mine without cheese so let's put the Marty pizza cutter to the test so let's get over this a little bit Wow that was fantastic the pizza cutter cut cut like one swoop right so this is just basically how you use it you just smack it here and go straight across BAM look at that look at that that is a nice beautiful cut on that pizza that's fantastic I would say I had a notice of pattern and usually yeah right to get it to cut this is like BAM boom what right Aquash it's excellent Wow I could have fun like this all day long so this is my pizza without cheese Wow I would say the murthy pizza cutter is fantastic it works really well it's comfortable comfortable in your hand it even has a little thing where you can hang it if you have a utensil hanger I'm easy to wash with that gap in between and it cuts really good I mean look at my pizza so let's make Eric a little jealous here I'm gonna take a piece of our pizza look at that that is a beautiful beautiful size guess what Eric this baby's mine Larry's delicious our pizza places around here are getting worse and worse we can't get a decent pizza in this town but one place that we really liked we bought one there and it was terrible recently and the service was really poor they didn't have any employees all their employees apparently quit when we went in there so it was like the owner and his wife and his wife said something like because they had waiters waitresses so she said something like she can't do that and walked out and left her husband there to wait on us then you went to a place to have five stars on Yelp mm-hmm we are from a place that have five stars on Yelp the people the pizza was absolutely horrendous this is fresh um tray out of the oven it's fantastic mmm even without cheese you want to try it loser don't have to ask me twice with cheese cheesy all kinds of good flavors that's all I can say where else is nice this really good that's good my boo knows how to cook a few things and pizza is one thing I'm good that's why we got married she knew how to do eggs and do pizzas I'm sold thank you so cheers everyone hmm we got some delicious homemade beats I'm right out of our own oven I need is fantastic once again thank you to murthy this pizza cutter is great I highly recommend it matter of fact I want to get another one so thank you if you want to take a look at this I'll put a link down the description it's actually really inexpensive I think it's only like 10 15 dollars so every single kitchen should have one of these and this is a great one so thank you again I really enjoyed it if you like this video please subscribe below and leave me a comment and alike and visit my website at a me learn to cook calm I'm so on Twitter and Pinterest and Aimee learns to cook I also have a really fun Facebook group at facebook.com slash groups slash Amy learns to cook and also on Instagram I'm at cooking with Amy

Please explain how to install a steel door frame in steel stud construction

in any building project secured openings require proper frame installation in this video you will learn how to prepare install and verify the proper installation of a steel craft doorframe locate the frame at the door opening location verify the frame opening number two actual opening location number the two should match next compare the handing and size of the frame to the drawing also check the hardware schedule contact your steel craft distributor if information does not match verify that the proper hardware reinforcements are installed on the frame also verify the hinge size strike type and closer mounting for this installation we're using a four and a half inch hinge and a si strike and both regular arm and parallel arm closer reinforcements a standard five and three-quarter inch steel stud anchor will be used when your wall system consists of a three and 5/8 steel stud using five-eighths inch drywall on each side some frame installations may require non standard or custom anchors for this installation we're using both standard steel stud and wood stud anchors next determine if the floor finish will be concrete carpet wood or tile always verify floor conditions to the drawing before setting the frame circumstances may call for mounting the frame directly to the concrete there may be carpet there may be tiled or may be ceramic tile or there may be wood form to go into place adjust the frame properly to the floor conditions so that the doors will not drag the floor when installation of the frame is complete some wood and tile finishes such as quarry are up to 3/4 inch thick frames may need to be adjusted off the subfloor for different thickness floor coverings in this application there are no additional floor coverings and no frame adjustment is required steel craft frames are provided with adjustable base anchors that allow you to adapt for floor surfaces up to one and three-eighths inches contact your job supervisor for verification of finished flooring the frame may be shipped already welded or it may ship KD or knockdown in this installation our frame is pre welded in a KD frame some assembly is required it is minimal slots and tabs go together the most important tab connection is at the rabbeted part of the frame and those tabs should be bent in an outward position install base anchors to the frame using screws provided pre-welded frames are transported to the job site using a shipping bar to prevent the frame from twisting and transit this bar is not to be used as a spreader bar to set the frame the shipping bar comes welded from the factory it is important that it is properly removed by grinding off do not bend or twist off at this point the steel studs will be in place leaving out the studs around the rough opening stand the frame up in the wall line at the proposed location using a proper sized spreader place it between the hinge and strike jams at the floor the spreaders must be cut squarely and accurately this will help in aligning the jams as they are anchored to the floor this is very critical make sure the frame is positioned to allow for the thickness of the drywall Anker the base anchors to the floor on each jamb using a concrete screw or drive pin type anchor in this application we are using a drive pin anchor install a minimum of six anchors place three on the hinge jamb and three on the strike jamb proper anchor spacing is important an anchor must be above each hinge and directly across at the same height on the strike jamb we're installing a 7-foot frame in this application frames taller than seven feet six inches will require additional anchors for additional guidance on anchor placement consult the industry standards as published by the steel door Institute or the National Association of architectural metal manufacturing if your installation requires electrical components now is the time to install conduits or flex cable for low voltage wiring now place another spreader in between the hinge and strike jams this mid frame spreader is important for keeping the frame straight and in alignment check the head of the frame for level accuracy you may need to adjust the base anchors to achieve a level head and proper floor clearance now move the studing in place and begin screwing the studs to the track at the bottom installing screws on each side of the stud once the base of the stud is anchored proceed with securing the studs against each jamb to the top steel stud plate then install screws on both sides of the stud next install the header above the frame the stud should be perpendicular to the steel stud track the dimension between the jams should be the same at the top and bottom of the frame at this point the frame has not yet been anchored to the studs check the frame again for plumb level and square go to the top steel stud anchor on the strike jamb and secure it with the screws the hinge and strike jams should be plumb in all directions position the top of the hinge jamb to the stud so that it will accept the proper thickness drywall on each side do the type framing conditions that we have here at this opening we've chosen to use a wood stud anchor the wood stud anchor has ears on it which allows us to bend the ears wrap it around the stud and then face screw it to the stud for an easier application now bend the anchor ear around the stud to hold the anchor in place attach the anchor to the stud with the screws provided once the anchors are secured check the frame for plumb making sure the frame is plumb level and square ensures that the door once installed will operate properly once the dimension and trueness of the frame is verified the remainder of the frame anchors can be screwed to the studs each anchor should be secured with a minimum of two screws when using wood stud anchors be sure to bend the ears tightly against the stud after the frame is secured to the studs and tightly anchored it should be checked again for trueness in all directions if the opening requires it verify electrical wiring needs when the drywall installer arrives the installer should check that the frame is plumb level and square before hanging the drywall it is the drywall installers responsibility to avoid excessive shoving of the drywall into the hinge strike or head jams and throwing the frame out of alignment spreader should be left in place during hanging of drywall to help prevent the frame from being knocked out of plumb during the drywall installation it may be necessary to chamfer back the edge of the drywall so that it will slip over screw heads that may be present around the frame because of the study as you install the drywall gently work it in and around the frame trying to avoid knocking the frame out of alignment once the drywall is in place replumb the frame and then anchor off the drywall the frame should again be checked for trueness before screwing the drywall off to the perimeter studs around the frame the frame installation is now complete and ready for the next stage of construction if you have any frame installation questions please contact your steel craft distributor or project job supervisor for assistance for more information about steel craft products please call steel craft customer care

Please explain how to tell if a guy is flirting!

don't know what I'm doing no guys easily and if you are new to my channel right now before we start this video make sure you go down there and press that big red subscribe button on the road to 100,000 subscribers let's try and do it together and also as always like trying to aim for 1500 likes on this video thank you for your support let's go so with this video I'm taking quite a big risky another reason plat is I'm kind of exposing this boy by yes boys I'm sorry please iron this video is gonna be telling you girls kind of boys secrets when the text how to know if the flirting we type thing I'm break-in boys rules here this is not a good idea I said let's kick it off number what's intricate aq something like hi who's this I've lost all my contacts please send me all your numbers while your name's not you numbers already got your number that was you know step one move it in slide it in to the iMessage audience no not that make sense what might even say anymore if he's actually like that that means that he wants to start conversation with you so if he's wanted to start conversation oh he's wanting to come from here slide is way implied in like a penguin they wanted to slide in and they are wanting to spark a conversation with you because they like you and not many guys do that because you know some guys are quite shy my god yeah I'm a shy guy if the don't really know how to start conversation with you that is how they will actually start I mean I've never done that on snapchat before where you get a snapshot and you put like a completely irrelevant sentence and send it to this shirt and girl that you might think is quite hot and then you send the minister after been like oh my god what no no I'm sure I didn't mean to send that to you in hopes of the reply scene it's fine how are you anyway yeah I just always get a part of just doing number do oh this one is a big one to show that guy like and that is when they take you first because we all know that girls out there always like I want the guy takes first by the way sometimes it is nice when a girl just takes first just putting that out there but girls usually like oh well the guy takes first saw those guys you know we're gonna pick up them is we're gonna pick up the courage I'm gonna pick up the courage and actually message you first when some of us are shy like I said before you know I'm a shy guy guy guy shy shy shy guy I wanna do it if a guy takes you first that means he likes you ladies AI chicas you are in Biff a guy just takes you first people please don't like pushing it unless they ask them like strange kid you know some nice lad and you like that did if you like them but there's some nice lad that actually takes you first don't push that nice lad away because we don't like that son alright then we don't like that sort of stuff you know boys don't like to get friends on been there before many a times you think about this if a guy takes you first that means one thing right we've put down this ps4 or xbox pad we've stopped playing Fifa and we've text you try to tell me that does not deserve like points right you see that screen up there that one behind me yeah TV fifa fifa that's all the ads on it FIFA apart from Monty stuff now kid it now number three this one's quite important one and it is one that girls actually appreciate is when guys listen and understand what you actually talk about like if you've got a problem and you want to come talk to his guys with Java at a time we don't listen because that's that's just how we are but if someone does genuinely listen to your problems and wants to know what is the matter they care about you they are trying to get in y'all the aims and get your number and take you one day and marry you and have children imagine what its gonna be like what I have children you imagine me 17 year old Lynch v can't do anything in his life and I have a I have a kid Lee I have a kid well not me personally my wife as a kid Lee Junior literally junior burn about just not being able to do anything in life oh my god it's gonna be great right getting off topic anyway if a guy is interested in what you have to say then talk to him like we tend not to listen so you could be texting as your big massive problem a big paragraph and then you can reply with also you understand what I mean and then we'll just reply again like yeah yeah totally definitely do what you mean completely understand what you just said I listen to every single word that's bought your night exactly the greatest like humans on the earth far away by this next one goes for both genders really quick replies oh my god when you find someone that can reply fast then when you got ripped someone that replies slower you know when someone replies fast you just know that they do want to speak to you and then if the start playing slow it's like I'll rather than now I've uh done something wrong while they're not speaking to me majority of the time they are busy they can be busy if they're not replying to you they are going to be busy sometimes yeah they'll say oh I'm sorry I will be see how we're doing this or doing that and then you but alright now can you carry on replying to be fast please because I'm getting lonely I need attention but quick replies of a big step if a guy replies to you within minutes well seconds minutes anything dies when they're interested in you how when they're trying to get a bit flirty blue tea with you when it does comes to slow replies sometimes I'll call that that you will know this if you have done this what I'm about so make sure you leave it down in the comments below so I know that I'm not the only one so say you take somebody and they don't reply to you still like let's say it approximately 12 minutes later your next reply I bet you'd or reply straight away I bet you with like another 10 minutes before you send that reply so you don't look as needing oh for God's sake I've done that so many times but sometimes you do find it hard not to apply because when you've been waiting for the reply and you eventually get it you just want to block off and then reply straight away but then you don't want to look needy so you've got to like you know hold it back of it and you know just win just hold that hold that thought in your head and then waive the right time boom strike it you win you've pulled grab your cup let the frequent final work for this video this video being quite quick I don't even know it feels like a thumb this quite quick I don't know what a guy's constantly texting you sparking new conversations so like when he's asking how he dares gone what you've done you did what you're doing next week or how have you been I've already asked that want to comb them but that's how interested I am I'm asking it twice so if they're trying to spark new conversations about you that shows are they're interested because they want to know more things about you know what you're doing next week so then maybe they could find out if they're interested in the same things then they're definitely going to be more interested in you you could say or next week I am going shopping you might find that that lad suddenly decides that he likes shopping anyway and he does also want to go shopping which means that you are going on the date actually felt quite awkward making this video because like I've never done anything like this and I mean you're exposing my own gender boys I'm sorry but these secrets ladies need to know well that's it for this week's video I'm sorry feel quite shot I don't know where a midweek video you know Wednesday I never usually upload on a Wednesday I do some days also I have a video coming out on Friday and Sunday they're going to be two Christmas videos but as always if you want to watch a new video from me make sure you click right there that is my previous video if you want to follow me elsewhere right there is my social medias like I said a style of video smash that like button 1,500 likes on this video would be awesome subscribe if you are new to this channel which is right underneath men you can watch any other videos on my channel from that card up there where that red arrow is pointing that would be awesome if you could see my channel watch those videos thank you so much for watching I hope you enjoyed this video if you want me to do more things like this make sure you leave it down in the comments below and I will be sure to do so as always I will see you on Friday though this time Friday and Sunday remember bye

Please explain how to work with a rubber hammer

hi I'm Richard from Jennings primary furniture and I'm based in South London a design make and fit bespoke furniture and I'm going to show you some DIY tips this is this is a dead blow hammer they're very similar both got rubber faces and they're both use for quite similar things this is just a lump a rubber basically the idea of it is you can knock things together at this joint here doesn't want to go together nicely just knock it together if it was a metal hammer you'd cause big dents on here the rubber hammer you don't deadblow hammer is very similar inside it you got some sand or lead shot or something like that as heavy so it hits and it just stops it doesn't bounce off on a normal hammer does bounce off this one doesn't it is just dead that's quite useful when you're have something big and heavy you want to move and you want to budge it along a little bit so in things like jointing this for instance here you join this together and it's not quite a line I move it that way you can just tap it like that and it gives a nice forceful hit without denting the surface rubber hammers are also used for shaping metal so you have a piece of metal when you want to bend it into a shape make a couple of pieces of wood or metal in the way put a sheet of metal on and bang it down the cap I'm sorry you basically just soft hammers

Please explain how to cover a box with fabric

hello this is Joe kina from modern homemakers comm and today I'm going to show you how to make organizers and yes you can pick whatever fabric you want if you're not as gaudy as me you know neutral still good these are great if you're a crafter you've got tons of junk treasures John whatever you want to call them anyway all you need is cardboard boxes and you don't even have to have the right size you can see I've taken these babies and I have duct taped them to custom fit my space you can't get something in the store necessarily that's gonna custom fit your space so you need boxes if they're not the right size you need duct tape you need scissors and fabric scissors there is a difference people you need a hot glue gun with lots of glue and you want to need something to protect your surface like a big grocery bag or if you have a crafting table that you don't care about this is the chance to use it and you need some plain copy paper as you can see I've lined the inside with coffee paper so go get your stuff and we'll be right back so as I mentioned a second ago I didn't have a box that was the right size for what I wanted so if you're like me all you're gonna do is literally cut your cardboard down to the size you want and then be liberal with your duct tape don't be chintzy so you can see I've gotten in on the inside seams and on the outside seam so you're not gonna see this unless you have a really thin clear fabric so don't use a thin clear fabric hey how much fabric do you need Regina well I don't know what size your boxes so here's how do you figure out and yes you can take that box in to the fabric store you might get some looks but do you really care so from the back whatever you want the back of your box to be but you need to decide that for yourself it's really all the same I guess I'll make this the back of my box put the front down and take your fabric and you need to have enough to meet an overlap just a little bit in the back this was a yard of fabric I'm not even gonna cut that so that I can turn it under and glue so that measurement is correct but we are going to measure and cut just you can see this is not an exact science I'm going to cut this much off so that's about a hands width at the end so we've got our start point get rid of this we're gonna cheat and fold it in half so we help half as much to cut anyone wish they had one of those pool tables like in the fabric store at home with the grid in it I just want to sneak behind the counter sometime and cut down the little metal channel that's in their table maybe I'm just dorky and that's just me alright so this we don't need for that in your scrap pile now you do not need to wash your fabric in advance because you might lose your crazy gaudy colors that you were going for so what we're gonna do is we're not gonna wash it but I'm gonna pause for a minute and I'm gonna go iron out because these will not go away on their own so take it some time go iron we've got our box all taped up we've ironed our fabric I'm gonna line it up so that whatever you want the back of your box to be that the fabric comes about to the middle of that so we've got I have multiple hot glue guns because over the years they were always missing so that's gonna help me be faster for you guys so we're gonna start with our back seam here and just right on the corner I'm throwing on some glue and this is very repetitive gluing all the way around the box that's all there is to it so I'm doing whatever piece of the fabric you want to be hidden so for me that's my white Salvage area and I'm just gonna keep going down in strips just remember to constantly be pulling the fabric because this is your one chance to have it live flattens and it doesn't have to cover every inch you'd be lucky to walk out with an organizer box if you've looked for $10 that was like a good deal and that doesn't mean they're pretty or the right size I would be embarrassed to admit how much money I've spent on organizers okay so we've got that done and now we're going to flip everything over and start from the other side now go real fast once you get the glue on because it starts to dry right away come on glue stick holy and smoothy not my husband organized his office area recently he requested no pink I don't know where he would get the idea that I like pink supporting the little from the inside so it doesn't buckle the right glue gun seems to be superior noted getting ready to turn the corner here I'm gonna make sure you always get both sides of the corner even though that's really close because that's for the most expresses now these boxes are great they could be more than just organizing you could put a nice cute little gift in them that someone can reuse one of my favorite baby presents this last baby was just a basket that I got to reuse and it was great and had the present which was bubble baths put some gift cards but it also had the basket which I actually put on my cloth diapers in so it's a lot nicer than wrapping paper that you just throw it in the landfill somewhere this you can keep on using you you can see if you look at my other videos I like to take cardboard and do other things with it got on my fabric organized with cardboard I've got a video on that okay we're gonna do our last corner and then we're to the tricky part and back pulling on it as we go around now this is a finished seam that came with the fabric this is the selvage so it's already been finished but what I'm gonna do because it's full of all those needle puncture holes from the machine I am going to turn it and do a turned under seam area here so I'm just gonna glue right on the project a little bit at a time where I want it to be I'm sorry that's harder for you to see is it be careful that's hot I make a lot of puppets so my fingers are kind of dead and probably but you can dip your fingers in some water if that's too hot for you takes away some of the heat okay so I've got that all the way down and now we're gonna do the inside so we're gonna turn it on its side and we're gonna basically be tucking this in all the way around this is really a lot like wrapping a present see it doesn't matter that I've got duct tape they're gonna go right over the top of it just like everything else okay I'm just gonna do that top portion and I'll come back around and do lower in a bit okay so we'll come back in and we'll cover all that up with paper so if you want you can do another band of glue on the lower portion of that but I'm gonna cover it up so I don't really care I'm gonna do one more right here flat alright so now we're doing the map look like this so it's easier once again we're wrapping a prison here people it's okay most of my boxes don't even cover the whole bottom so it's okay if it doesn't match up right on the bottom I don't know about you but I personally don't walk around looking at the bottoms of people's organizers so we're just making sure you can't see it from the front or from the side and then like a present you see we've got these corners nice and good we're gonna take that down we'll do one right in there hold it tight so who really cared about the looks of your bottom you could use some of your extra fabric and cut a square just the size of your box iron under the edges and then it would look beautiful to have there you so we've got that all flat and now I'm gonna go grab my chair we're gonna be doing the in side so I'll be back in a second if the inside you can be done right here you don't have to do any more like no one's going to see your extra serger of thread and stuff so you could be done however I want to put the paper in there just so it has an extra finish you can also use matching fabric or a cute contrast fabric for your insight it's your thing but paper is pretty cheap so what we're gonna do is cut the paper to fit and we're gonna save the bottom for last now if you have to do any corners I recommend you take the paper and go like this see how I did that that way there's no cut where you can see the cardboard box but we've still got that nice lip of fabric up here then we're gonna go all the way around I'll be back in just a minute nice I'm gluing in the last piece but I wanted you to see how I did all the corners you can see and I fold it in to the bottom and that was just folding computer paper so that you don't see it and then I'm gonna glue in the last piece and then you won't see any of that so this is something that's going to be having rough wear like a child using it that would be a good reason to use fabric instead of paper but this is literally just storage in my office and voila come around French look at your beautiful basket that you made was that worth 30 bucks although I did get burned too several times so don't rush like I did so anyway check out my other videos on our YouTube channel or we have lots of other great articles not just cracking stuff on modern homemakers.com have a great day

Please explain how to grow marigold & zinnias from seeds //green plants

welcome to my channel in this video i'm showing now the seedling process of marigold and zinnias first take a tray or seedling tray or flat pot and fill the soil in half of the tray next here the marigold dried flower which has plenty of seeds marigold fresh flowers will not germinate and It must be dried in its plant to produce seeds now separating the seeds with fingers and put them in seedling tray then put the thin layer of soil above the seeds and then spread the soil evenly next pour water slowly in the tray or spray the water keep the seedling tray in shade and warm place one week later seeds grown in about 1 to 1.5 inch height after two weeks , ready to transplant in pots then separate plants one by one and carefully move them next seedling the zinnias do the same seedling process such marigold seedling keep the seedling tray in shade and warm place do not place in wet place and also do not pour too much water because wet will cause the seeds germination after week zinnias grown in about 2 to 2.5 inches height after two weeks grown well healthy plants and ready to transplant them separating the baby plants carefully and replant them in new potting environment thanks for watching

Please explain how to rebuild

if you mysteriously losing brake fluid which want to do is go to your wheel cylinders peel back the dust boot and see if you have brake fluid cooling in there if you do you've probably found your leak if a brake cylinder is leaking you need to either replace it or rebuild it to find that if you can rebuild it what you want to do is take it apart they're very easy to disassemble clean it all out good and look at the bore if the bore is neither scratched nor pitted you can probably rebuild this to rebuild it what you're going to do is use a little bit of brake fluid as a lubricant take your brake hone and we're going to make about two passes no more than that to clean up the insides clean it all up again now you want to put your replacement rubber parts in you're going to use again either brake fluid or brake lube to do that put it together put it back in the car and bleed as you normally would and you're fine something to remember if one wheel sonner has reached the stage where she's beginning to leak the others are probably pretty close to that therefore it's a good idea to do all of them at the same time

Please explain how to cook delicious yellow rice in oven

welcome back to my channel I'm ngspice so today we are cooking bet yellow rice yes so we are gonna be cooking back to yellow rice I here are the ingredients we are going to be using for this recipe so here I have my bottle I'll be using one stick of butter here I have my Camaro pepper you don't have to Monroe prepare you can use black pepper or any type of paper yo you like here I have my tumeric powder here I have my ginger powder thyme curry powder garlic powder here is my onion museum white or now you can use any onion you have those in my salad here is my shrimp stock use my mixed vegetable I have green pepper half green pepper 1/2 red pepper carrot beans and every other change in here ok guys let's go cooking I have my meat stock I'm using chicken stock I'm gonna be adding my Camaro pepper I have turmeric powder ginger powder time curry powder garlic powder onion my stock cubes now I'm gonna be adding the bottle to eat you know add salt to taste so next I'm going to add the shrimp we're gonna combine wash the rice boiling [Laughter] so next I'm gonna add these rice so I'm gonna take you know transfer the rice in to make sure your rice is so just like by boiling the rice then you transfer it to your baking tray I'm gonna add the miss vegetable on it just lady miss vegetable niche and distribute it properly with avoid it so the finished cooking is going to be in the oven so I'm going to be baking it in the oven I've preheated my oven to 350f okay so I'm gonna be spicing it up with some little cheddar cheese this is optional okay you don't really have to do it so I'm gonna be adding some cheddar cheese to eat so just a little cheddar cheese mostly to just bits of those little just it's just a little spice it's okay this is how it's gonna look so now I'm gonna be I'm gonna pop it into the oven to bake for few minutes so I think the oven now we're gonna leave it here to beg for like 10 minutes or 15 minutes so this is how it's gonna look after 10 minutes you can see the rice is ready now soft so you stay eats and you start so here is our rice ready can see looking yummy right alright guys so that is it if you like my video please give me a thumb up if you are new before you leave please don't forget to hit the subscribe button and I will see you guys in my next video bye bye you

Please explain how to make)

I will come back with Tom today I got a cool idea I make the butter fries type of cake it's behind me here but I'm going to show you how to make it it's really easy to make yeah I got some diaper I used the silent number one is the Tonys eight diaper and I got some Toro ribbon is the one is the what 1/2 inch and another one is a 7/8 inch mm-hmm and I used the receiving blanket actually I used three receiving blanket but they come before you can use only three um I cut the pipe cleaner I got some the flowers and I cut the bathtub toy the little whale holy cat from where Walmart we found a Walmart it's just a little bathtub toy to be the head and um rubberband and tape hurry math does is it and see let's start it first we're going to make a small bottom wing um I use the diaper I roll one first with the rubberband and after that we're going to use the diaper just cover that is um five more diaper parts the row one is the six diaper we use for the wing is east wing for the bottom here going to be look like this and then you can trouble ban can look like this and make their another one same thing here's the bottom wing of the butterfly on the diapers 12 diaper says six each wing we're going to wrap with the receiving blanket um actually you just fold the receiving blanket the same size a diaper and put them like this and you can tape them on top just tape like this um I wrap the ribbon around and make look pretty see you look like like this and we're going to make the second wings I wrote a diaper and wrap it up rubberband and then we're going to put the diaper rau we're going to use the eighth diaper each wing on this one so then they'll look like this and then you can wrap with the rubber band um when you wrap it the rubber band you can use the kind of tie a little bit on the thing because a make life it's not like willy circle what I call it morbo oh yes it goes like this so my rip event is really big here and we can continue into the second one now the top wing is the done row I'm going to put with the receiving blanket for the same thing same side it's not laid around too much you make the gap a little bit gap you know not all over and then you can tape it or you can use the paperclip to hell just like this oh yeah I will wrap it the ribbon first and then we can turn them around upside ow see we're going to turn them like this now we can put the top wing with the the bottom wing can be look like this and after that we're gonna wrap with the ribbon around here and I show you later um now I'm going to tie with the ribbon um actually I use the some more one and I fall in half and then we gonna tie them together on the top you can see right here so you can make it tie a little bit squish you can play a little bit make it look nice and neat like this and then oh you just laugh at like this first because we're gonna make the UM the body after butter fry who put here so you're not you just left a new Pilates posh um I did not wrote the receiving blanket actually you can mash with the butterfly is same height yeah that's how you fold that is being blanket and roll the tight roll the thymus what you can because he not gonna too big yes and then you can tape it so you're going to look like now I'm gonna tie with the ribbon will be left hang here just tie them across like this and we can tack them behind the wing here let's see I can put the back so you would go yeah they're good in the back gonna be like that and you can tie the bow in the back so very mask and let me look like this we just look nice and neat I put the whale on top like the head of the butterfly actually he have little tail here I just talked with the pike Rina between our ribbon and him that's it cick we're like not too far off and then I can make the vertical the antennas yeah cannot see so and then I can throw them down like this and we're gonna put the what I call the frothy ball on the end where are you tucking those in um we can talk behind a receiving blanket here lay that just little you know then I make the antenna and with the fluffy ball um in the whale little whale hit like this and then you can add some flour they would I show you before like this and premises very much done all right everyone doesn't mind butter fries a different kind and with the head and this one no hair this one have two flowers and you can add everything you like and that's very easy to make you everyone hope you enjoy my video this time and um we see you next time with the co idea thank you for watching me

Please explain how to clean costume jewelry

hi i'm chuck taylor from anthony jewelers in nashville tennessee and i'm here to show you how to clean costume jewelry this is how we do it in order to clean costume jewelry you're going to need just basically three things you're going to need soap water and a toothbrush all right first off you have to understand when you're cleaning something that basically what you're doing is removing dirt from it and in order to remove dirt the best thing that was ever invented was soap now you have to understand the relationship between the piece of jewelry in the dirt okay that they are held together by what is called surface tension that at the molecular level the dirt molecule is attached to the jewelry molecule and that is held together by a phenomenon known as surface tension and all soap does is breaks the surface tension so as long as you know that that to clean this all i'm gonna do is put some just regular dishwashing soap in a little dish and fill it up with water and i'm just gonna take a toothbrush and now there's an old wives tale about using toothpaste when you're cleaning jewelry and it is a toothbrush not toothpaste toothpaste is real thick and sticky and it gets in there and you can't get it out easily so honestly what i'm doing here and to clean it you have to understand how surface tension works that i may not be on my first pass i may not be removing the dirt molecule from the jewelry molecule okay what i may be doing on the first couple of passes is removing a dirt molecule from another dirt molecule so you want to rinse it off again and it already looks better and then i'm going to do it again and each time you do this you are breaking through those layers of dirt just one molecule at a time sometimes but eventually you're going to get down to the bottom and another good tool is a little bitty end brush like this that'll get down in there and i say i'm being very careful with it because these pieces are delicate and this is a non-ammonia-based soap just regular dishwashing soap yes i know there's a lot of products on the market that you can buy that you know have names that you know jewelry this that and the other but they're all basically soap that are designed to break the surface tension down between the dirt and the jewelry it's all the same thing so now let's rinse this off again take a look at it and looks pretty good and all we did was use soap and water and broke the surface tension between the two and you end up with a perfectly clean piece of jewelry now just take a paper towel dry it off and we're done and that's how you clean costume jewelry

Please explain how to deep fry tofu - video recipe

and welcome to cook with Ozzy today I'm making some deep-fried tofu now this isn't the usual sort of recipe I'd make a video for but I was making some for some other recipes and I just figured I'd show you how I do it so for starters you will of course need some tofu and a nice firm tofu will work best here for this now this is great for stir fries in any sort of Asian dish and what I like to do is make a fair bit of it and then keep it in the freezer and this way I have some one handful whenever I need it so all I'm doing here is cutting them into rectangular pieces you can cut it whatever size you want whatever shape you want you can fry up a whole block if you like so you can cut some slices into your stir-fry or you can do what I'm doing here and just use smaller chunks now I'm just taking my pieces of tofu and placing them onto some paper towel and now this will just remove some of the excess moisture so it doesn't spit at you too much when you put it into the deep frying oil and then I'm just coating these in some corn flour or corn starch and this will give them a nice crispy outer coating just like that and we're ready to fry so here I've got some canola oil preheated to 180 degrees Celsius or 350 Fahrenheit and I'm just going to place in the pieces very gently and fry them for about ten minutes and once they're done just remove them onto a rack to drain off any excess oil and you are done guys that is all you need to do in general I only use this for stir fries but you can serve it as an entree just like I'm doing here with some dipping sauce sweet chili hot chili or soy sauce will all work great here so enjoy guys be sure to check out my BBQ cooking channel on Google+ and my Facebook pages I'll put the links down in the description bar along with the full list of ingredients for the recipe today thanks for watching and I will catch you all next time

Please explain how to: ponytail with clip in hair extensions - long thick ponytail | instant beauty ♡

hi beauties this is Sam from instant Beauty in this video I'm going to show you how to make a long glamorous ponytail with extensions extensions are great for adding length and volume to your hair when it's down but they're also great for adding thickness to other styles like ponytails I'm going to share with you guys a great stylist secret on how to apply hair extensions and make a ponytail with them for the technique that I'm about to show you guys you can use any type of hair extension you can use long thick hair extensions that you already own you can use colored hair extensions it doesn't matter what length it is but for the one we're gonna make today I'm going to be using 18 inch length hair extensions I'm going to be using pieces from a full set 150 gram full set that we have at instant Beauty but you can use any extensions that you already have the first step is to decide where you want your ponytail to sit on your head and then you have to create a base so I'm going to part my hair at the crown and then make a small ponytail so I've created my small ponytail kind of like a square shape it doesn't have to be perfect because it's going to be hidden now and we are applying the extensions we want to make sure that the clips are all open and ready to go we have to start with the center clip and place it right at the base of the ponytail that we have created then you have to wrap them around and clip them in so after the first step this is what it looks like I'm going to be applying three more of these to create the thick long ponytail and check in with so now just eight weeks since things are in and we have to cover them so we have to bring our own hair up around it okay guys so now I have a long ponytail what I need to do is straighten or blend in the extensions and my own hair because I have a lot of layers they show a little bit but I'm just going to use a straightener and flatten them so that's what it looks like and then finally you just add some hairspray to tame any flyaways that you may have and you are done so thank you guys I hope you enjoyed this video if you have any questions or comments please feel free to write down below and of course like and subscribe thank you so much everybody bye

Please explain how to make aspic jelly for danish open-faced sandwiches

♪ ♪ Hello, how are you? Well today I'm going to make traditional topping for one our sandwiches our liverwurst sandwich, and it's called "sky". In English, I would translate it to aspic. I believe that's the correct translation, and the "sky" we like I said we put it on our liverwurst sandwich as a topping. We use it on the Hans Christian Andersen sandwich, and we use it on the very traditional sandwich called "dyrlaegens natmad" or I will translate it to "the veterinarians night snack". I hope you also will like it, and I'm going to show you how to put it together. Thanks! So the ingredients for the in Danish was called "sky" or in English aspic. I have two cups of water. I'm going to boil it with half a cup of chopped onions, a little bit of parsley, 2 bouillon cubes. I take a tablespoon of soy sauce, and I'm going to add 2 teaspoons of gelatin, and if you like, you can also add some, a little bit of sherry for flavoring or white wine. However, I'm not using that today. So first of all I have to pour it all in, 2 cups of water, 1/2 cup of chopped onions, a little bit of parsley, the soy sauce. So here I have half a chopped onions and parsley, two cups of water and I'm now adding the two bouillon cubes. I'm going to heat it up to a boiling point. So this has been boiling for quite a while now, and now I add the two teaspoons of gelatin. I want to make sure that it gets all dissolved. So, I keep stirring it. And I am now going to strain it. And there I have my aspic or "sky" as we also call it in Danish. And I'm going to let it cool down. And it'll take several hours. If you don't have time to wait for that to cool down, I would recommend use a little bit less water, and then you can of course add a couple of ice cubes, and they'll cool down real fast. So here we have it. I'm taking the "sky" out of my refrigerator. It's all stiff, and I can now use it for my sandwiches. So, please try to make our "sky". As you can see, it is pretty wobblyish. But I think it tastes good. So go ahead and make it. Please subscribe to our channel. I look forward to seeing you another day. Thanks a lot for watching. Ingredients Recap: •2 cups water •1/2 chopped onion •1 bundle parsley •2 bouillon cubes (or 2 tbsp meat extract) •1 tbsp soy sauce •2 tsp gelatin Optional: sherry or white wine ♪ ♪

Please explain how to make a duct tape beach bag for your doll | sophie's world

hi I'm Sophie and welcome to my world today is part three in Riley's beachwear today I'm going to teach you how to make this cute little beach bag where Riley can keep her summer reading I'm going to show you how to make it right now so for this project I'm actually going to be using an exacto knife and my cutting board remember be careful with your exacto knife I'm going to be using two kinds of duct tape I'm going to be using my accent tape which is going to be the pretty bag and then I'm going to be using a tape that I'm going to be using for my straps and stuff so then I'm also going to need my ruler some scissors and really that's about it what I want to start with though is I do want to make some clean cut tabs as I call them clean cut tabs I just do a piece of tape lay it down on my cutting board and I lay my ruler along the edge and I'm just going to be making small tabs here and I'm doing them every two inches excuse me every two squares what I say which makes them about half an inch so I'm just doing them every two squares which in this case is 1/2 inch and these tabs are going to come in very handy when I'm making my bag and I'm just going to peel these off and have these ready to go so I'd say look at that my blade came out very careful when you're working with these just tighten that back in there ok the other thing I'm going to be doing is I'm going to be needing some pieces of 1/2 half-width tape and so what I'm going to do is I'm just going to take take my accent piece here lay it down I'm going to lay my ruler right down the middle and I want to have these pieces on hand and I want them to be nice and smooth so I'm going to cut any ragged edges off of these and again I'm just going to place these off to the side so I have these when I want them and I'm actually going to have I would I would prefer to have like six or seven of these pieces set and ready to go and about eight to ten of these small tabs ready to go now I'm going to need a piece of duct tape fabric and I've already made this here this duct tape fabric is 5 inches by 7 inches this is going to be the main part of my bag so I'm going to take my fabric and I'm just going to fold it in half like that and then I'm going to use my white tape that I've already cut into nice strips and at that fold I'm going to line up the edge this is why I wanted it nice and neat there because I'm going to line that edge up I put this on half on half off and I'm going to do the same thing on the other side the second piece of tape half on half off now what I'm going to do here is lift this up I want to save this tape because this is such great tape and so I'm just going to use my exacto knife to cut this little extra bit off so that I don't waste it ok now half on half off I take this and I just fold this over so basically we're making a little pouch as we've done a hundred times before so there's our little pouch now what I'm going to do is I put my finger inside and I'm going to put it right in the corner where that that little pointy edges and I'm going to squeeze it and just like when we make our fancy purses our three dimensional purses I'm just going to fold this right down like that and now remember those little extra pieces of tape I'm going to take one of those little extra pieces of tape I'm going to lay it right here line it up because it's same tape and I'm going to lie it across the bottom lay it across the bottom there lay lie oops lay a lie okay flip to the other side put my finger right in the corner there pooch it and lay it over once again I've got that extra bit of tape so that I'm going to get exactly where I needed it to be lined it up and look at that I have the beginnings of my beach bag now the only thing my beach bag is really missing right now is its straps and also if you notice inside there there's a little bit of stickiness and that's because we made this three dimensional so what I'm going to do is I'm just going to take another one of these little strips of tape okay and I'm going to lay it on the inside right along the edge there to sealed it now if I wanted to I could also mmm sticky today I wanted to I could also use the Chevron and then you wouldn't see this but I kind of like this this kind of look I'll call it my Miami look okay so there we go just rip that at the edge and then I'm going to take the other piece lay it in there all the way to the bottom seal that off and I'm going to use my exacto knife and cut that little extra bit off and now I want to put a lip around here and so what I'm going to do is I'm just going to take a little piece of this tape again and I'm going to lay it right on the edge half on half off like I always do and just fold it on down hold it on down fold it on down fold it onto and fold it on down and I've got I missed a little teeny bit there so I'm just going to another little piece of tape but it's okay because these are nice and neat pieces of tape so I just line it up and fold it over okay so there's the beach bag and now all it needs is straps now for the straps I hope by now that you've looked at some of my other videos you know how to make a strap but just in case let me show you how take a piece of tape as long as you want in this case I would be doing 12 inches sticky side up fold it 1/3 of the way up smooth it down flip it around 1/3 of the way up onto itself so all the sticky disappears like a lot and now you got yourself a strap now in this case I'm not going to need such a thick strap that's pretty thick so what I'm going to do is I'm just going to cut this right down the middle think about beach bags is you want them to have nice long straps that's why I made this 12 inches all right now do you remember these strips that we made earlier pick up one of these and I'm going to place it right at the bottom there now I'm just going to come inside here go to the edge and tape it into place make my bag strap go up and over and do the same thing on the other side place it on there like that place it inside the bag wherever I want it right there on the edge there we go one strap and I'm going to repeat that process on the other side with my other strap and I'm going to do it right on the opposite side and just make sure that you get your strap going the way you want it to go because it can twist so you want to just make sure that you don't have to any twist ease and light inside and there you go there's your bag and that's all there is to making a little beach bag for your dolls or your teddies or for whatever else you want to make it for what's really cute is that you can put all kinds of stuff inside for more fabulous Beach ideas come and check us out at Sophie dash world.com

Please explain how to use a laser level video

I'm going to set up and show you how to use a laser level today so I've got a really nice Dewalt laser level and the nice thing about it is they all the same cordless if you have other DeWalt cordless stuff at all it's all the same charger so charger just goes in the back so that's ready to go and then you'll want to get there's a little threaded piece underneath the level and it just basically screws into the piece on the tripod you want to make sure that it is fairly tight on there because you don't want that to fall off when you're moving that thing around if anything it might ruin the calibration or worse it could break it this is actually the laser detector and we're going to be using this too as we go around this will be basically our eyes and seeing where the where the level is so there's a little bracket as you loosen and tighten and that actually goes on the measuring stick here so you can set it here you know you can even set it sometimes I even set it backwards because I'm standing behind it so I'll end up you know that way I can see the what the actual number is on what the actual hider or height is on this on the measuring stick and one of nice things I really like about the the laser detector is on the back side as you can see this but on the back side there's a little window and it'll show you up or down whether or not you need to go up or you go down based on to get to level then it just has a little line across to get the level now you can use the actual the actual beeping there will be a noise but it'll be little it'll beep just very slowly if you're far apart and it just starts beeping more rapidly as you get closer together and it'll just be almost a solid beep once you hit the the line level line now I personally don't like to use it because I find the sound really annoying and I think he uses up too much battery so I just use the little window on the back and that works perfectly fine so I'm going to go ahead and level this it's a self-leveling laser but you do have to get relatively close to level for it to work so let's so I tried to set it up it's best I could and then as soon as you turn it on it starts to self level and as it's starting to self level the X and the y little button here they're just sort of blinking and once it's level it stops blinking it goes solid red and you can see the the the level is rotating so that means we have a level point so if I'm looking to find a contour line a contour line is just a level line I'm going to go ahead and turn on my laser finder laser detector and as soon as you push the button turns it on if I do a short button again I hit the I hit the on/off button just don't hold it down but just push it two more times that will turn the sound off I don't want I don't really want to hear that that beeping sound I'll go ahead and so we've got so we'll have to face the laser now you can there we go that's right at that level so go ahead and tighten tighten down at that level that means that then go ahead and mark with the flag that means that everywhere along this line everywhere along this contour that I can that I can find this level that's going to be my contour line so so if I want to keep on mark and I can keep on going down now I know where this line is I've already marked it but that's actually pretty much right on the money so there you go so if the back of your screen like this has given me a little line that means you're level now if if your little screen says like I go up here I'm going to get a I'm going to get an arrow down so that means I got to move it down now if I move it too far I'm getting it an arrow up so that's going to tell me which way to go to get me close so there we go right here and we're level so then just go ahead and mark pretty simple so I mean you can you can do this pretty far away I mean I think it's it's supposed to be like about the thousand or 2,000 feet now let's say for example that I was interested in building a contour pond here and let's say this was my shoreline and I was interested to see how tall a wall I would end up with so this is 2 foot 6 inches it'd be very easy to just go right over here go right over here and find the level so come straight up and there we just hit it at about four foot seven inches so that means that from this point we would have a two foot and one inch tall wall not including the free board we had to call it ad the free board to be a 3 foot 1 inch wall to be level with our shoreline over there you can see how that would be a very handy tool and finding the slope finding a good pon site determining what your wall Heights are going to be and then what's level and getting all that to be very accurate down to a sixteenth of an inch

Please explain how to make an all grain whiskey ferment....easy when you know how

okay guys well the first thing we've got to do is clear some space we got to get the dolly out and we got to get this barrel outside cleaned up and ready for a new new ferment and it's gonna take a little bit of time you can see down there we certainly don't want to use any old stuff funky stuff anymore so we want to always get sort of a fresh start so we'll empty that out and we'll get her on the get her on the dolly and take her out back and clean her up as soon as we removed that from there we'll get the grain started - we've got the big bucket the big pot over there that we're gonna use not the big one not Sparky but the one on the table there to do some grain cooking and we'll be all set so let's get underway okay it's not easy work you know I got this dolly and the wheels tires are flat on it and it sucks and I got a hole this fat boy back here and you can see you're over here and Draenor out good got all the old grain and slop in her you can see inside I gotta get all that crap out to sort of tilt her up there and let her let her drain off a bit while I start the grains cooking and then head back to spray that good okay boss doesn't know what he misses on that mash making day because this is the stuff that keep you slim and young when you're and the whole broad so I've got a got to go car I got a truck in a hundred pounds of sugar and 50 pounds of grain no time for [ __ ] guys alright guys we got the grain and we got the 50-pound sack of grain in and we toss it really particular about how he likes his how he likes his shine made especially to mash and he likes to boil the water first and then slowly add in the grain so we don't have any aspects of burning makes a lot of sense it's the opposite of the way I use the stupid way I used to do we put the grains in add the water and bring the heat up and once the law and get scorching and all that kind of crap we've got about two gallons of h2o boiling away in there and we're going to add about 10 pounds of grains in that while we're done next boiled up the temperature and it's probably it's gonna be good that we don't have to worry about scorching we can basically turn the heat off and then let it and it just coke and swell and burst the grains in it in the meantime guys we got to go out there clean that down that really sucked plus I got a whole 100 pounds of the sugar in here and that really sucks dude what if it gets to lay there and watch me alright guys I told you no time for [ __ ] let's get on with the show okay guys we got the barrel clean she's back in position if I'm feeling a little a little energetic I might go and clean up the other barrel too cuz that's gonna have to be clean before the next ferment - she's nice and spanked and clean inside make everybody happy and we're boiling - yeah getting the water up to temperature here I did haul in the first bag of sugar and we got the grain ready to go so I think in next step will be I need to draw eight gallons off for Sparky from the last run because this is a sour mash method here we do with ya juice that we make so we need to draw the eight gallons off there and yeah get her in there thank you dr. Crowe and you've heard of Old Crow whiskey well I'd use that he's the guy that started the sour mashing method okay so you'll learn a little bit too [Applause] second load guys this is how we do it a gallon - this good good sour mash back set all right nice and neat today - no spillage okay guys all right an important component of why people often fail when they do a beer ferment at home is they don't properly address the yeast situation and they don't proof or prove that the yeast is good they don't give the yeast a chance to blossom before they put it in a lot of times if you just add yeast to a mix it might kill it or something like that so I have about two cups of backset here and I have a cup of water and I'm going to add some sugar to give the yeast a good environment about the three tablespoons of sugar I'm going to stir that in good that'll give a yeah you know give something for the yeast to get active one besides the salad master and now I'm going to add about a cup of the red star yeast here and you don't have to be exact about this add that in yeah that's a bad idea cup or so their clothes are up good and I'd like to keep that I'd like to keep that refrigerated the trick is keeping everything nice and neat so what we'll do is just stir that in lightly and let that get activated between the he to the fat ninety degrees the mix there and the sugar and about a half hour so this will be wild and bubbling and when the temperature gets low enough there after we add the grains and the water on top or up then we can put the we can add the yeast and aerate it for the rest of the day and let her start teaching guys alright guys you can see the grains are just bubbling away real good and we'll go about five more minutes and so and what that does is gives a chance for the the cell walls to break down and first the grains and let all that tasty goodness out no matter that I think I'll turn the gas off now and we'll just let her let her steep a wall and it'll do that I'll do that conversion real good they're really nice guys always laugh at me because I think that's real tasty this feeds I've eaten that a few times and it tastes real good meanwhile we got our proofing yeast going to it over here that's starting to come to life good and in a few minutes well probably in that hour so we'll be able to add that in when it's cooled down we want to make sure it's not too hot when we add our yeast in because we don't want to kill it so all right guys looking good real good okay guys you can see the yeast is very bubbly and very happy always proof your yeast first a happy yeast will give you a good product you can see I've transferred and done cooking the grains it's all in the pot all I'm doing now is mixing that 50 pounds of sugar with the grains and the sour mash and then we're going to add our whiskey not our whiskey our IRA yeast oh he's kind of getting to me it's been 95 degrees here at the shack but I want to thank you guys for being for being out here today seeing how we do a nice permit same principles for beer and everything else right guys thousands of years later

Please explain how to make your cat's fur soft and shiny - taking care of cats

[Applause] a healthy coat of fur on a cat will be slick smooth and shiny not coarse or brittle proper nutrition and good grooming will help keep your cat's fur healthy whether it is a long-haired or short-haired variety after you learn the basic steps to promoting healthy fur it will be easy to incorporate them into your felines care routine part 1 brushing your cat 1-room your cap to improve the look of its coat regular brushing will remove loose hairs dirt into external parasites it will also help spread natural oils produced by your cat's skin throughout its fur this will increase the overall shininess and sleekness of your cat's coat brushing your cat frequently will also reduce the amount of fur that it swallows when grooming itself thus reducing the number of hair balls it produces begin grooming your cat at a young age so that it will get accustomed to it professional cat grooming services may also be available in your area prices for these services can vary widely to decide how often your cam needs brushing long-haired varieties of cats will need more frequent brushing than short-haired varieties long haired cats will need to be brushed once every few days while short-haired cats may only need grooming once a week other experts suggest brushing long-haired cats for at least 15 minutes per day 3 gather the supplies you will need to brush your cat well you will need a quality general brush a steel comb and a rubber or bristle brush all of these should be versions designed specifically for cats optionally a fine chinois or wash cloth can be used to wipe your cat after brushing this will remove any remaining hairs and improve the shine of your cat's coat for carefully brush your cat starting with the general brush stroke your cat's fur softly working from head to tail next use the steel comb the same way this will help remove any dirt in Babri finally use a bristle or rubber brush which will remove any loose hairs if your cat's fur has any tangles carefully work those outs before brushing its whole coat if you wish wipe your cat with a chinois or a washcloth after brushing to maximize the shine of its coat make sure to be gentle on your cat's sensitive areas such as its belly to brush the tail of a long-haired cat make a par down the middle and brush fur to either side part two bathing your cat 1 decide when to bathe your cat cats are known to be self grooming and will only rarely need a bath however if your cat candor wont groom itself well you may need to bathe it more frequently how often to bathe your cat will depend on its breed and activity level long-haired or especially active cats for instance might need to be bathed more frequently a cat that is our throw neck and has difficulty grooming itself however might also need to be bathed more frequently to prepare your cat for its bath you may want to place cotton balls in your cat's ears to keep water out of them choose a bath time when your cat is calm playing with your cat before giving you the bath might help to come and tire it a bit so that the bath is less stressful try to soothe your cat before the bath by giving it a small treat talking softly to it or petting it you may also want to clip your cat's nails before bathing to protect yourself from scratches 3 pre bathe your cat before bathing your cat you should brush it thoroughly then take a washcloth dipped in plain lukewarm water and use it to carefully wipe in and around your cat's ears if your cat's face needs washing you can also use this cloth to gently wipe it for prepare the bath fill a tub or sink with enough warm not hot water so that you will be able to wet your cat but not so much that it could be submerged if you are using a tub or basin to bathe your cat in place a towel or non-slip rubber mat in the bottom your cat has something to hold on to during the bath it might feel more secure and V kamar make sure that the room you will bathe your cat on is warm 70 degrees Fahrenheit or warmer as your cat may become cold when it is wet v carefully place your cat in the bath you may need the help of another person to put your cat in its bath catch generally dislike water and this step might be slightly stressful on yours you may also want to protect your hands and arms from cat scratches and bites by wearing gloves and long sleeves when bathing your cat 6 use the right kind of shampoo cats have different skin characteristics than humans and so you should not use human shampoo or soap to bathe your pet check your local pet supply store for shampoos and conditioners specially formulated for use on cats or ask your veterinarian for advice if your cat has skin allergies or other issues your veterinarian may prescribe special shampoos be sure to carefully follow all accompanying instructions 7 gently bathe your cat using just a bit of shampoo in lukewarm water one part shampoo to 5 parts water massage your cat's fur work quickly but calmly and be careful to attend to any problem areas dirt matted hair etc work from head to tail being careful to avoid your cat's eyes and ears you can also use a gentle spray hose or a bottle to watch your cat talking to your cat in a soothing voice may make the bath less stressful 8 rinse your cat thoroughly since cats are such persistent self groomers you can expect yours to start cleaning itself with this tonguing pause after you bathe it before you let your cat out of the bath make sure to thoroughly rinse its fur free all traces of shampoo or conditioner so that your cat does not accidentally swallow any otherwise your kitty might wind up with an upset tummy or other problems 9 dry your cat once your cat is well rinsed remove it from the bath using a cloth or paper towel blot its tail and legs to remove extra water wrap your cat in a towel to dry it keep it warm until its coat is dry if your cat is short-haired and your home is warm it may be able to dry on its own without a towel hair dryers may not be a good choice for use on cats as they can dry out of your cat's skin or even cause them to have pH stroke in addition the noise may bother some cats if you wish to use a hair dryer make sure it is on the lowest or cool heat setting 10 brush afterwards if necessary a bath alone may be enough to make your cat's fur sleek and shiny however if it's hair is long tangled or matted you may find that brushing afterwards will help 11 give your cat a treat bathing can be stressful for many cats so reward yours with the treat afterward petting or otherwise soothing it can also help to calm it down part 3 feeding your cat for a healthy coat one feed your cat a healthy diet to have a healthy coat a cat must eat a healthy diet whether your cat eats canned food dry food raw food or a combination of these it's night should be high in proteins and fats your cat should also always have plenty of clean fresh water to drink talk to your veterinarian for specific advice about selecting the right foods for your particular cat to serve your cat high quality foods commercial cat foods can vary in quality to ensure that your cat's coat stays healthy looking check the foods nutritional content listed on the label and make sure it matches your cat's current needs to ensure quality you can look for a cat food with a label showing that it has been certified by the Association of American feet control officials fqo raw meat diets are recommended by some experts as a way of making it easy for a cat to get the nutrients it needs 3 change your cats foods when needed your cat's dietary needs will vary throughout its lifetime foods that are designed for kittens are not suitable for older cats and vice versa the nutrition your cat needs also depends on its individual factors like health and activity level if your cat is not receiving the right kind of food for its age and activity level its code may look coarse and dull for contact your veterinarian if your cat's coat seems inexplicably dull if you are feeding and grooming your cat according to its needs and its code still seems dull brittle or coarse talk to your veterinarian about the problem health problem such as digestive issues parasites cancer obesity or stress can affect the appearance of your cat's fur your veterinarian can determine if there is an underlying health problem causing the poor coat quality

Please explain how to make a ipod touch case

why I'm making these scissors and tape and iPod first put it over here in the club then you take it and fold it over here and then just gonna make a crease and then you do it again make sure it doesn't make it round now feel for the end of your iPod it's like - right here then right then you fold it around here like that okay then you fold the and both of these so they're same hey that then get some tape and tape those together male on tape it to the back a little bit then hold that then you get your second piece of paper and you just probably cut about half of your finger right of the paper like that maybe less then you put this part down and put your piece of paper right there flip it around and fold these pieces often if when you do that this moves over let's cut all that do it again then you just cut just make it so it's level and you get some tape and a tape that then once you do that you get more tape and tape this little line right here flip it over and more tape fold this side over here I might wanna put tape the other side too and then once you do that your thing will be like moving so put it back in and then on the back you need more tape tape it to the back and then it won't move so then you could open it now you could put anything on it like draw on it it's paper and like I did to this one and yeah it could come out you just put to take off this you just put your thumb through just pull it out and it just slides out sometimes there you have it your iPod case

Please explain how to transform a kids’ room into a teens’ room

the homeowner has twins a boy and a girl and they're just at the cusp of coming into teenage hood they had beautiful bedrooms with children but they just needed a refresh into something that's more mature and reflect a little bit more of their personalities when i first saw kaitlyn's bedroom she had this beautiful custom headboard that they had had made and so that was a piece that had to stay because it was so fun and very reflective of the direction that we wanted the room to stay in i used your headboard fabric for reference and then i thought we would tone down the drapery fabric somewhat so i pulled out that soft peach shade and made that the dominant color in the drape and i found a beautiful tebow fabric that we had custom draperies made out of by q design and it just helped to pull in the color palette but also introduce a new type of pattern that just softened the space a little bit the homeowner had some beautiful linens that she had already had custom made so we just added to it by incorporating a beautiful variety of cushions on her bed and by layering you get the feeling of a very custom bed that way rather than doing two nightstands we thought we'd take away the chair that was in the corner previously and put a bookshelf instead which is much more useful and it fills in that corner by giving it some height the chandelier was a lucky find previously there was a very small chandelier and so i thought why not make that a feature of this space it is quite large for a bedroom of that size but because it's quite open and almost hollow with a lot of the strong beading it has the illusion of still being very light even with the elegant drapery and the very beautiful chandelier these are all pieces that she'll love for years to come and that can grow up with her when i first saw blake's bedroom it was so cute it was very green and had a lovely window treatment but it was much more conducive to a younger boy so we thought that we would give it a bigger refresh he has a very small window in his bedroom and it just looks onto the neighboring home so there wasn't a big view to capture per se so blinds were the perfect solution the ones that we found are a faux wood look which i thought was really fun it kind of added to that california vibe that we had happening in the space we had just enough room for a double bed so we chose a beautiful upholstered headboard that's not unsimilar to the wall color which helps to give the illusion of a larger corner and then we layered it with lots of different patterns we had some custom cushions made by q design used pattern sheets and a beautiful hudson's bay blanket there wasn't any room for an upholstered piece in the space so all of those layers on the bed really created that look there wasn't any space for a nightstand beside the double bed so we used a beautiful wall mounting pivoting sconce from serena and lily that i love and then just a floating nightstand it's actually a table that slides directly under the bed so it takes up almost no space to keep it that rustic sort of beachy vibe that we had happening in his bedroom we chose a beautiful mango wood desk we paired the desk with two floating wood shelves that coordinate very well with the wood and iron styling and it makes it a fun space for display but also very functional for him as he's studying when working on rooms for kids and teenagers it's a lot of fun because you have an opportunity to be a little bit more playful and you're not just looking for a certain time period in their life either you're thinking more into the future of them growing what are their hobbies it's a very specific way of designing and i think it's a lot of fun to work with younger clients

Please explain how to clean and cut a leek

all right i want to show you how to cut and clean a leek leeks are in the onion family they have a more complex flavor than onions and i really like to use them in soups and when sauteing things in place of onion it gives just a really more complex flavor than just your average onion would so when using leeks you want to clean them really well because there's a lot of sand and grit that gets stuck down in between these layers so usually a leek will come with big long green ends these leaks have already been trimmed we don't want the dark green part anyways if anything you would only pop them in the freezer and save them to make soup or stock later on but to cook with and to eat we only want the white and light green parts so first things first so this is what we have left of the leek the really light green and white part and so the first thing i'm going to do is make a long incision the entire length of the leak and i'm going to go all the way through so now i have cut the leak in half now to really clean it all you need to do is run it under some hot water like see this dirt here and you want to rub all of that off you want to get all of that disgusting dirt out of the leak now you just want to run your leak under the water and separate those layers so that you can get any dirt that has decided to lodge itself down in there these things are growing underground so there's a lot of dirt in there and if you don't take the time to get it out you might have some really sandy soup and we don't want that okay now all we have to do to finish slicing this leak up is to cut it you can either leave it as is or you can make another incision down the length and that will just give you smaller pieces of leak i tend to do that but for this one i think i'll just leave it as is so pretty so clean now ready to cook with

Please explain how to cork wine bottles

hi I'm Adam white my equipment I got to show you a demonstration on Hawking there are two main types of corker a small hand talker and italian-style corker the main difference being is that really if you're doing about six lockers at a time this small hand courgettes inadequate most corks today are none so you take the cork into the chamber and you pat on down hard to chamber into the bottle I have to say that if you're doing any more than that this becomes a retirement and really the best option is to leave us battalion corker very easy to use place the cork in the chamber onto the bottle price on down sister hey presto one bottle is single

Please explain how to make fresh, organic salsa in 5 minutes

hi there I am Robin and I'm the green smoothie girl my website is green smoothie girl calm and welcome to my salsa video today I'm gonna be showing you how to spend less than five minutes and be the hit of the party with not only fabulous salsa but also something really raw and nutritious that you'll enjoy and your family will enjoy too my kids are gonna be home from school in a couple hours and they're gonna be totally pumped when I have this treat for them and it's something I don't have to feel guilty about it because it's really really nutritious first thing I'm gonna do before I even start the salsa is I've got these corn tortillas and in another one of my videos I show you some ways to make healthy chips this is yet another way maybe even the easiest just take corn tortillas put them on a cookie sheet and you know probably best if you spray it so they won't stick but just cut them in fourths with scissors or you can use a pizza cutter and then I've got my oven on broil already so it's kind of heated up and I find that you don't need any oil whatsoever to make these just really fantastic chips it'll be nice and crisp eat and have a great flavor okay so what I find is that it takes about two minutes on each side when you put the broiler on in your oven so when you put them in make sure you turn on the timer cuz you know how that goes right I don't know about you but I've burned a few things if I don't use my timer okay well that's going we've got two minutes to see how far we can get with some salsa here's the thing with your Blendtec Total Blender you don't even really need to chop the tomatoes just throw them in whole if you want to I do have a recipe in Chapter 7 of 12 steps to Whole Foods for my favorite salsa today I'm doing what I pretty much do all the time be honest with you I don't really use recipes I use them when I'm testing them when I'm writing a book or a recipe collection but most the time I just wing it I have already washed these Tomatoes okay I'm just going to smash them to get some juice down there okay mostly just for the entertainment values I'm sure you're enjoying watching me do this I Love Lucy thing you know kinda like the vat of grapes right okay then I've got two these can use one Anaheim pepper this is like a what this is some kind of banana pepper or something it was at the health food store and uh you know that seems kind of hot I'm gonna not put all of it in I forgot to buy a yellow onion so I'm gonna put this red onion in it'll be just as good and I don't really need to chop it a lot I'm just chop it in a few pieces okay then I'm gonna do some chili powder some garlic if you want to get cloves of garlic that's great I do buy this pre chopped garlic and it really actually has pretty good flavor I've been taken to task on another video for doing this like how dare you save yourself time they're up to you the the fresh cloves of garlic probably are a little bit better that's true I'm gonna put it a little bit of original crystal Himalayan salt and you can put some freshly ground pepper in if you want let's see if at a time we have to flip our chips we can well oh there we go okay we're going to use the pulse on our blender here this is a good use of your pulse button the thing is in a matter of seconds we've got salsa that's chunky it's not super smooth it's just the right consistency the way you like it it looks like we need another minute dirt okay now while we're pulsing this you could put your cilantro in the blender but it I really like it if it's just kind of coarsely chopped if you're a big cilantro fan you probably like to have chunks of it and so just to make it a little bit different than the texture of the rest of the recipe I'm just gonna chop it took me ten seconds right okay let's see how did I do here do you like the texture of that salsa it's chunky it's absolutely perfect you couldn't have done it better by hand and it's ready to put a lid on stick in the fridge for the kids when they get home or take to a party everybody loves fresh salsa it just is the first thing to go at a party okay and here are our shrimps ready to be flipped is what you wanted to look like is just slightly browned on one side and very dry okay two more minutes on the flip side and we have pretty perfect chips what's really fun is to serve the chips when they're warm with the cold salsa and you created a big hit I hope you enjoy it see you next time

Please explain how to store and defrost breastmilk! helpful tips!

Oh mommy friends today this video is to talk about how I store my breast milk in the freezer if this is something that interests you then please keep watching so you have some freshly pump breast milk what should you do well you have three options the first option is you can either leave it on the counter and you have to be able to use it between 4 to 6 hours you can store it in your refrigerator and that will last up to 5 days or you can put it in the freezer I'm just going to show you what I do and how I store my breast milk in the freezer I have a separate compartment because my milk supply has one up tremendously that we couldn't put it in the regular freezer of our refrigerator you can store frozen milk in a deep freezer that is by itself for up to 12 months ideally though you want to try and use it within 6 months but if you need to store it within 12 months that's fine too in this quick demonstration I'm going to show you how I breathe my milk so you will need the milk that was just pumped a milk storage bag and a permanent marker remember how much milk is in the bottle that you want to freeze write everything down on labeling side of the bag there's a spot for date time volume and name next remove the seal tear way portion at the top of the bag and open at the seals I love these bags because they have a double seal to prevent leaks carefully pour all the milk inside with the bag and then slowly lay the bag flat on the table to take out as much extra air as you can and then seal it lay your milk flat inside of the freezer I just took a container that used to hold a food from Costco I washed it and now I reuse it for my milk storage bags it's perfect now we wait for it to freeze now that the milk is frozen you can put it inside in an upright position which creates so much extra space in your freezer so I just took a bag of frozen milk and I'm putting it in some warm water to defrost at room temperature if you can don't use hot water because that'll destroy some of the nutritional properties in breast milk next you want to redistribute the fat into the liquid as it's going to separate and to do this you want to swoosh or swirl the bag around but don't vigorously shake it go ahead and get you a clean bottle and it's ready to pour these bags are awesome because of the way they were designed there's a convenient pour spout at the top which makes pouring the milk a breeze don't forget to get every last drop they don't call it liquid gold for nothing when you're finished with the bag just discard it you don't need to reuse it or save it and you're ready to go this video was super informative and helpful if you have any questions at all please feel free to comment down below and I will answer any of your questions thank you so much for watching mommies have a great day

Please explain how to carve a halloween pumpkin - uk tutorial

hello and welcome to this video on how to carve a Halloween pumpkin by the end of the video you'll have all the info needed to get pumpkins like these ones I did last year here are the tools that you'll need a pumpkin carving tool a seed scoop and the clear loop right we're getting started you firstly need to cut a lid to get into the pumpkin you can mark a line using a pencil or a pen and as you get around the back be sure to make a two slash key this is so you can easily locate the lid into the correct orientation and it also helps keep it locked in place this is a very basic lid that I am cutting but you can make it as fancy as you like or even going through the base of the pumpkin arguably the most important tool in a pumpkin carvers toolbox and the carving blades themselves and I don't think you can get much better than these Pro carving tools by zombie pumpkins each one comes with six carbon steel blades of which there are free heavy-duty ones for tassel just cutting the lid and free fine toothed blades for carving those intricate patterns I highly recommend you get yourself one of these tools less sturdy and will last you for years now that you have the lid off you can see all the pumpkin seeds strings and flesh that need to be removed it's time to get messy it's quite fun this / but be sure to have a bin or a bag to hand to dispose of all these juicy in it it's about nowlet's if you're carving inside anyone who isn't carving a pumpkin will begin to complain about the stink pumpkin Master Jacques or Ripper now this is a no-nonsense manual pumpkin gutter its teeth are serrated to cut through all those annoying strings and it has a large spoon for scooping out copious amounts of bonking got a great tool that i used to go all my pumpkins but you will most likely have to import one from the USA I highly recommend it the Claire loop this is a Claire modeling tool but I use it for fitting out the walls of the pumpkin it's officially known as a single-ended squash circle loop - or as most people call it a pear-shaped loop it test strips of pumpkin flesh off at a time so you have to be careful not to get too overzealous with it otherwise you'll ruin your pumpkin for the ideal card it's recommended that the walls of the pumpkin are Norfolk in the morning this will make cabbing easier and ensure you get a good glow from your pumpkin so this is a job for the clear loop or as I said earlier be careful as it can tear off thick strips of pumpkin at a time and if you go too thin your pumpkin collapse in on itself whilst carving I've done it myself and it's never fun now before you get carving you're going to need a carving pattern and two of my favorite places to get them are orange and black pumpkins calm and zombie pumpkins dark wolf sights have a whole range of awesome patterns they're crammed full of detail and instantly recognizable characters from movie monsters to video gifts there's a huge selection available so please check them out there'll be a link in the description below there are a number of ways to transfer the pattern one of the best ways of tackling this job is to buy some sorrel transfer paper preferably in blue or any color bernal contrast nicely to the pumpkin once you've trimmed down the pattern you need to cut the transfer paper to about the same size align the pattern with a transfer paper making sure that the powdery side of the transfer paper is facing the pumpkin fix in place with some tape and you may have to fold or cut slits in the pattern to help it farm to the shape of the pumpkin but once it's secure simply dress around the pattern using a ballpoint pen or a pencil now to carve the pattern you need to swap over to the fine toothed detail saw I'm checking the thickness of the pumpkin wall to see if it's fin enough for carving as you can see I'm pushing the blade through various shapes that are going to be carved out and removed check the blade for the length it takes to pork through to the other side be careful not to stab yourself it's best to do this at various locations on the pattern to check for a uniform wall thickness the bottom of the pumpkin tends to be the fittest so some extra pfennig may be required again be careful not to take the walls too thin aim for about an inch now but you have your chosen pattern on the pumpkin it's time to get carving generally you want to start in the center of a design working on smaller pieces first and working your way outwards if you have some big pieces to cut out leave these until last because it will help maintain the structural integrity of the pumpkin whilst carving try to keep the carving blade at a right angle to the pumpkin surface and carve with a sawing motion the more you saw the easier the blade will cut through the pumpkin just follow the lines with a gentle pressure pushing the blade through the pumpkin don't force it once you've finished carving remove all the you've cut out if some bits won't move take your carving knife and cut where there seems to be some resistance take great care not to damage your carving now that all the carving is done it's a good idea to take your pumpkin to the sink and rinse the carved area this will help tightly up your carving lines by removing those little bits of pumpkin flesh as well as rehydrate your pumpkin if you spent a while carving now all that's left is to wait for it to get dark so you could admire your masterpiece I'd recommend lighting it with an LED rather than a candle it's safer and it won't cook your pumpkin like a candle will meaning you can enjoy admiring your handiwork for longer so that's it I hope you all found this video of some use and I hope you all have a terrifyingly good Halloween Oh sir just one more thing

Please explain how to open locks with a lock pick gun

A lockpick gun, also known as a snap gun, is a tool that can be used to rapidly force open a pin tumbler based lock without using the key. A thin steel rod known as the pick gun needle is inserted into the lock and the snap gun briefly fires the rod against all of the lock pins simultaneously, momentarily freeing the cylinder and enabling it to be turned using a tension wrench. A snap gun is an alternative to a conventional lockpick, which requires other techniques such as single pin picking or raking to free the pins. I show this in my “How to Pick a Lock (Basics)” video. How a Pin-Tumbler lock works A pin tumbler lock contains a set of key pins and a set of driver pins. The key pins move within pin channels inside the cylinder assembly and are cut at different lengths corresponding to the lock keying. The driver pins are installed in the lock housing and spring pressure forces them to penetrate the lock cylinder and prevent it from turning. When the key pins are correctly aligned by the key, the top pins are exactly aligned with the barrel of the cylinder or the shear line, and it may freely turn. How a Pick Gun Works A traditional lock pick uses trial-and-error methods to find the correct alignment of the pins. The snap gun uses a primary law of physics, the transfer of energy, to momentarily burst all of the driver pins out of the lock cylinder without sending the bottom pins up into it. The snap gun strikes all of the bottom pins at once with a strong impact, and then withdraws again. The bottom pins transfer their kinetic energy to the top pins and come to a complete stop without penetrating the lock housing. The driver pins are thrown out of the cylinder body entirely up into the lock housing. Until the springs force the driver pins back into the cylinder, the lock cylinder is momentarily unobstructed. The same physical principles are involved in lock bumping, but the snap gun automates the transfer-of-energy process. When you squeeze the trigger it cocks the mechanism and lets the needle drop. There is a thumbwheel on the pick gun that determines how hard it snaps. When the trigger is further pulled, an internal hammer is released which causes the needle to snap upward. A correctly applied snap gun can open a lock very quickly compared to traditional lock picking, but the sharp impact is more likely to damage the lock mechanism than raking, which mimics normal key movements. Adjusting the thumbwheel just right takes a bit of getting used to. The pick gun needle is inserted into the keyway as level and as straight as possible below the bottom pins and a tension tool is used to apply light tension to the plug. The tension should be very light The trigger of the pick gun is pulled, causing the needle to impact all pin stacks simultaneously. When all top pins jump above the shear-line, the plug will be free to rotate. Pick guns often require several attempts to pick the lock, but are effective against most low to mid security pin-tumbler locks. Start with low impact, if it doesn’t open after a few snaps increase the tension on the impact a little. Generally, lock pick guns are simple to use and can perform the task quickly, efficiently and effectively. While they’re not a substitution for traditional lock picking tools, they work on most standard pin tumbler locks, but they shouldn’t be used on anything more complex. The use of security pins does not hinder movement of the pins unless tension is applied prematurely. Pick guns are available in both downward and upward picking motions, depending on the orientation of the lock cylinder. Although pick guns work regardless of the orientation it may be difficult to use one upside down. There are also electric pick guns that use a motor or electromagnet to continuously oscillate the needle. The needle is placed under all pins and vibrates, hoping to vibrate at a resonating frequency that will cause all top pins to jump above the shear line, allowing the plug to turn. Only open locks you own or have permission to open.

Please explain how to: make vegan brownies

it was so good though when I ate it it was so good I haven't had sugar in a very very very long time I'm all hopped up out hi I'm Coco Kissinger from cocoa bakes and I'm here to show you how to make my budgie chocolate vegan brownies you will surprise anybody and they won't even know they're vegan and we're going to need three tablespoons of water one and a half tablespoons chia seeds which is new to me is great and gels up kind of like an egg wood and we're going to need 1/2 cup coconut oil in replacement of butter 1 cup sugar 3/4 cups gluten-free flour 1/2 a cup applesauce one and a half cups almond flour 1/2 teaspoon baking soda which isn't typical in a brownie recipe but it does help the rising process since you don't have the eggs 1/2 teaspoon salt of course 3/4 cups or 10 ounces of bittersweet vegan chocolate first I'm going to go over and turn the oven on to 350 degrees then I always like to line my pan first so I have my parchment paper in my pan I always like to aisle it so that the parchment paper sticks to the pan so if I smooth out batter that stays that way stays in its form so now I'm just going to push down into the corners and try and smooth it out as much as possible make sure it's Six's sides pretty simple and next we're going to make the Chia egg because that has to sit for about five minutes so to do so we put our chia seeds in the bowl and then we measure out our water it's going to be 3 tablespoons to one and a half tablespoons of chia seeds so we'll just let this sit for about five minutes and while it's sitting we're going to go melt our chocolate and our coconut oil together and you want to make sure that you get every last drop of coconut oil or else I would have put less in the recipe and to melt this you're going to put it on by memory which is just like a boiling pot of water and you'll just let it sit there on low heat until it's melted I don't really have a time for it you just kind of let it sit until you see it's melted and while that's kind of simmering and melting together we're going to come back and mix all of our flowers together so we're going to put the almond flour you can use cashew or almond or hazelnut whatever you have available it gives it a little bit of body and a better texture and the gluten-free flour together and you can use just like a store-bought gluten-free flour they're all pretty much all purpose so we're going to put the baking soda in just going to add a half a teaspoon of salt I'm going to mix this together just to make sure everything is smooth and evenly incorporated we're going to go check the coconut oil and chocolate mixture now and don't forget your spatula so it looks like it's starting to mount I can hear the water boiling under it you want to make sure that it's not too hot because you don't want the chocolate along the sides to burn and also be careful if you're stirring over you might burn yourself chocolates ready so we're going to bring it back over to the station and turn the stove off and so now we're going to add the sugar the vegan sugar then next we're gonna add all of the applesauce a great replacer for kind of fudgy silky smooth feeling then we're gonna revisit our Chia egg and see how that's doing and you can see it's kind of gelled and goopy and a little bit gnarly you're gonna put all of that in here and mix them all together so now you have your sugar your applesauce coconut oil chocolate Chia egg inherence can be a little goopy and it's gonna go into your flour mix now the bowl is really hot damn it's gonna go into the flour mix so we started making these vegan brownies when I had customers come up to me at a farmers market and tell me that they demanded vegan brownies I mean I guess that everybody should be able to eat what they want especially if you're vegan or gluten-free whatever you are it shouldn't make a difference and that's why I started making this it's chocolatey it's fudgy it's delicious and it's pretty simple so now the last step is to pour our batter into the pan so we'll just dump it right in and I have an 8x8 pan you can use a 9 by 9 you might have to decrease the bake time by maybe 2 minutes so instead of 37 minutes will be 35 I'm just going to spread it out and if you want this is a great time in the last step when we mix it all together to add any sort of nut you want you can add like about a quarter cup of chopped nuts maybe a half a cup if you're really into nuts and that's it I'm going to put this in the oven now 350 degrees for 37 minutes it's been 37 minutes and the brownies are done and it smells so chocolate in here so this is what they should look like a little bit thunking a little bit dark round the edges and just smell amazing they need to cool for about an hour and a half until they're completely cool to the touch just because if you don't let them cool they will crumble they're vegan the brownies have been cooling for about an hour and a half now if you just can't wait to bring them out of the pan go ahead and cut it in the pan so you can choose the size you cut it into I'm more of like a big brownie girl so I'm going to go ahead and try and cut it as best I can into 1/3 and then in half again try and get it out with my spatula and if you've cooled it long enough it should come out in one piece let's see if I did amazing it looks fudgy it smells so good there we go Ramola there's chocolate there sugar a gooey it's delicious go try it and for the recipe click on the bubble

Please explain how to make apple crumble

here is another delicious way to use your apples this fall I love a good apple crumble or you can also call it an apple crisp here are the ingredients if you would like to do a screenshot of them or maybe you would like to jot them down they'll also be below the video if you'd like to print them out so we'll go ahead and get started here we're going to make our topping so let's combine our flour and our oats along with a little salt and our spices I'm going to go ahead and put the dark brown sugar in here I want to go ahead and get that mixed up pretty well into the rest of the mixture just to make sure all those little lumps are kind of broken up a bit we want this to be coarse that we want it to be a coarse mixture from the butter that we're going to add in just a bit and not from the brown sugar so I went ahead and also added my other sugar and now we're going to chip in the cold butter and I'll use a little pastry cutter here just to kind of break it up and like I said we're just going for kind of a coarse crumb mixture okay you can also use two forks to break up your butter and I'll just go back through with my fingers here just to make sure that it's broken up nicely and then I want to go ahead and pop this in the refrigerator while I get the feeling ready so in another bowl we'll go ahead and zest our orange the orange is an optional ingredient I do think it kind of gives a little something special to the filling so when you zest your orange just go from front to back turning it as you go and I'm using a fine grater okay and now I want to get a little bit of the juice of the orange of course I estimated the measurements on both of these so you can do the same and now we'll go ahead and add some vanilla a little bit of salt our sugar and I'm also using another optional ingredient this is fresh grated ginger and I need at least about a tablespoon of this so the flavor will come through and I'll go ahead and add my melted butter along with some flour and now I'll just go ahead and mix these together real well and then we can start to prepare our apples you can use any variety of apples I think a good assortment of apples is the best so you'll need to go ahead and get about five large apples depending of course on the size of your skillet and I showed you earlier in another video how I like to slice my apples I do not recommend that you slice your apples this way unless you are very comfortable using a knife so be careful there go ahead and use your cutting board if you need to and of course you can always use to leave the peeling on here to okay and we'll get our cast iron skillet you may want to put it on a cookie sheet depending on how many apples you have try to fill up your skillet completely with apples I wish I'd have had a couple more and then we can just dump our crumb mixture right in the center and then we'll just gently let it fall out to the side okay so most of its going to be concentrated there in the center and now we can go ahead and put it in the oven I had it preheated at 400 degrees Fahrenheit so go ahead and give it a check here and it's looking great it's nice and brown on the top and it's kind of crispy and hard in some spots and loose and others that gives it the name crumble so after about 10 minutes or 15 minutes of letting it cool you can serve it and it's nice and warm and screaming for some vanilla bean ice cream I just love it with vanilla bean ice cream my recipe does call for a lot of crumble because I do serve it with ice cream and I like to have a little bit of the crumble when I eat the ice cream to you okay it's great with mint I happen to have some apple mint in my container garden so I slivered some of that on there and I do hope that you can give this a try if you enjoyed the video please head down there and give me a big thumbs up let me know that you liked it also feel free to share it on your favorite social media I am only on Google+ and YouTube so I'm not out there on all the other social media platforms so whenever you guys are out there sharing my videos it sure does help thanks so much for watching and y'all have a beautiful

Please explain how to make mexican chilaquiles

hello everyone this is elizabeth with explosive videos and today i'm going to show you how to make quick and easy mexican chilaquiles there are many ways to make chilaquiles but this is my favorite way of making this delicious mexican dish here's what you'll need 15 corn tortillas 2 cups of shredded cheese 2 cans of alpato sauce chopped onions chopped cilantro black pepper salt and sour cream first you're gonna start by cutting the tortillas into triangles as you see me doing here next you're going to fry your tortillas i used about a cup of oil you want to fry the tortillas for about two minutes or until they're golden brown when the tortillas are finished frying sprinkle some salt on them using the same frying pan remove most of the oil and begin to saute your onions after you're finished sauteing your onions add your chips back to the pan pour in your two cans of el pato sauce and add black pepper to your liking then mix your ingredients well now add your cheese and continue to mix until it's completely melted serve your chilaquiles by sprinkling some cilantro and a scoop of sour cream and you are ready to enjoy this delicious mexican meal thank you for watching my video and i hope you enjoy this recipe as much as i do bye you

Please explain how to make easy dimino pendants / tutorial

hi guys it's jimmy so um i am doing a swap with another youtuber and i wanted to make something really special for her so i'm going to show you how i make my domino pendants it's kind of an old thing everyone has their own style but i want to show you how i create mine now i'm going to make these um i like to make mine so they can be used as pendants or keychains okay so what you need is you just need a domino and then you need your images okay so i just get whatever picture i want and i usually do a whole bunch of them and then i cut i resize them in microsoft word and i can do a tutorial if you want on that to the dimensions of my domino so that's usually one and a half inches in width by two and a half inches long okay and i do a whole set of theme together now i do do some that are more tailored toward men so like with broncos ravens you know the green packers that kind of thing and then i do some of these which are free images that i found online um yeah and then i usually add a jewel okay so i'm going to show you how to do this it's super simple so what you'll need first is some deco page glue or mod podge and i would have or you could even use matte medium and then you need a brush so what you'll do is you'll just cut out your image and then you'll attach it on the domino now as i said this is for one of my youtube friends and i wanted to make her something super special and i'm starting a new line in my etsy store on customized domino keychains and pendants for arrows so i thought and she absolutely loves her little foodle so um i thought that i would make one for her first which is wonderful so you just take it you kind of smooth it out a little bit right on there now at this point you can trim it if you need to so you could if the little paper sticks out i just go around with some scissors and i trim it off that's how it looks and then while it's there i just brush it just like that now i let that dry fully and what you end up with is something that looks like this this is for another friend okay it's there two animals a dog and a cat so then what you're gonna do because you brushed it and you let it dry is you're going to add your glossy accent your diamond glaze you could use um jekyll's arts liquid glass the only thing is that it doesn't create like a bubble you kind of have to brush it on or you use too much um so i usually use dimensional magic or i use the glossy accents okay and then i use this to attach my finding which is this thing okay or my bell okay so what you'll do let me bring it in closely you can see this so you can see how i do it is i go first i go around the image and outline it so i go around all the edges just like that just like that and then i just fill it in and i do have a skewer so that i can pop any bubbles that may come but if you don't shake it you're usually fine with the glossy accents and the dimensional magic is easy too but it creates this little finish that's so pretty and i just kind of make sure that i go around my edges just to give it a really nice smooth finish and i don't know if you can tell but there's a bubble right here so what i do is i will just go in and just get rid of that bubble and i don't try to pop it or anything i just try to work it out like that okay just like that so then i would set that aside to dry you'll know that it's dry because it will become crystal clear and that takes a couple hours at least now you could paint these if you wanted you could use inks but i usually don't paint them you can also use acrylic paint too that works or deco arts their fluid acrylics work really well too so golden's fluid acrylics would probably work well too but just kind of leave it alone so then you need a bell so you can use it as a necklace a pendant or as um or as a key chain okay and you just want to make sure that your opening is long enough now i have a video where i do this in depth i'm going to show you a really simple glue on fill to do so here i just have 22 gauge wire and i'm just going to make up take a length of it and add my wire cutters and there will be more of these tutorials because um i love making these and i make them a lot for craft shows and they're kind of fun people love seeing how to make them so you're going to take them and this is about four and let's say four and a quarter inches of wire and then i just have my four and four in one tool okay and what i'm going to do is i'm going to take the round nose of my pliers and i am going to make a loop just like that okay now i like mine to be just a little bit decorative so i just use this part so that it touches the tip of the wire like that and then i'm going to take it and i'm going to begin to make kind of a swirly okay and to do that i'm using the flat part of my foreign one tool which is a flat nose pliers part but you can get this little tool at walmart um and you can do a lot with it i mean this is all i had for a long time until i you know broke down and got a pretty good set i mean it's nothing fancy at michael's for like ten dollars and then i just use my 40 off coupon yeah but this thing is on like three or four dollars at walmart and you can do a lot with it so at that point i do maybe around three rounds so it looks like that and then i need to make the loop part and that's so that i can get my keychain through let me show you here so you want to make a loop so it's big enough or if someone wanted to hang a piece of chain or lace or whatever they could do that too okay so what i do to do that is that i take my round nose pliers and i hold it so that this part because this is going to go flat on my pendant so i actually want this to run around roll around to this side okay ready so i'm just going to take them and i have a little bit excess wire but that's okay so i'm going to go about halfway up okay and you just take it and we're just going to kind of make an x shape okay and then for then i am going to use another pair of pliers here okay and that's not the best looking loop let's try that again get that really tight make that nice crisp x okay just like that see that so there's a loop okay now i'm going to take my four and one tool put that in between so that it'll be sturdy in place okay and this i'm gonna kind of spin around like that okay and then i'm going to take my switch hands here and i'm gonna take this and i'm gonna loop it around and i do have an in-depth video too where i show you how to make a few different styles of glue on veils this one is a little bit more complicated than the other ones that i show you but i wanted to show you one so if you wanted to you wouldn't have to watch a separate video but i do recommend that you watch that one because normally i don't use this kind of glue on build you use another one now if you you could also use your e your um e6000 to adhere your metal or any type of metal and plastic glue will work too you could probably even get away with super glue and that'd be fine too just like that so that's the way it looks nothing too fancy but it's a little loop okay but i will link that video below so you can see it and i do recommend that you watch it if you want to learn because it it you save so much money during the veils okay so i'm just going to attach this on here okay so all you do to attach is you just take the back of your domino and i'm going to use my liquid gap glass but um you don't have to do that and you kind of want to go a little bit over because you want this in the middle okay so you want that set in the middle okay and as you can see i have quite a bit there so this is going to have to go way low i didn't think about that okay so i can just kind of get pick up some of that glue and then i think it was about there that's okay normally i make it shorter but i overdid it a little bit there we go but it's okay if it's a little bit low just like that okay and then you're just gonna set that aside to dry on the back you might have to fiddle with it and then i usually put a little bit of that glue on top and then i smooth it out but this glue is great for sticking metal to plastic but see it's right in the middle of my pendant do you see that so then i can put my keychain or whatever through it okay and then you could add jewels so all i did was i waited for this to fully dry and i just got some of my jewels and the person that i am making this for she loves pink so i just got some pink jewels and i added them too the thing about with these crystal ones is that they do tend to discolor after a while they kind of get this weird kind of look to them when they've been hanging around for a while so what i'll probably do is pull these off and just add some new ones and those are ones that i got from the dollar store so that's not the best quality these are a little bit more better but the pearls you don't have to worry about that but they're so fun and they're super simple to make and you could even use your own artwork and they're so great and i love them because you can attach them to keychains and like i said this is a part of my new doggy line and i did add a little bit of glitter to this too so after i brushed it with the mod podge i added some glitter glue just to make it kind of shine up a little bit but this is a super fun project thank you so much for watching i will definitely have more tutorials on this and hopefully you'll get to see the person that gets this fabulous pennant now this is the glue these are traditionally the glue on bells that i make so it's back in front like that and then it just has a loop and you can stick all sorts of different cords and all sorts of different things in it so that's the one that i usually make and i'll link the video below so you can see that kind but this kind is really easy too and it's not going out anywhere it's stuck on there really good and they last for such a long time and they're so pretty so if you're interested in one of these pendants for the animal in your life then um i will link below to the listing to my etsy store and you can order one for me they're going to be about five dollars per a little pendant and it'll come with a little veil and a little keychain and a special gift too okay so it's great for pet lovers in your life okay so see you guys next time have a fabulous day i will put links to all the products that i use and i will see you next time and i use 22 gauge wire in case i didn't say that okay thanks guys bye

Please explain how to make fishcakes

ho good evening and welcome I'm going to do a quick recipe basically I've been watching all the fish stuff on child forward Jamie Hugh wittingly and Gordon it's fantastic we should be more fish we should be trying to basically save our planet so I'm going to show you something really tasty it's quick to eat now in the supermarkets you get your fish cakes which will make this big and it tastes all right but they're not exactly nice fish cakes will show you a really easy way to cook fantastically gorgeous takes them fish cakes simple recipe they can be frozen they can be used at a later date and it's cheap to make so here we go so far all I've done is basically get pan and get bag of potatoes new potatoes or potatoes any potatoes take the skins off over you shooting potatoes and I haven't taken the skins off I've just big d chop them in half chuck them in a pan further them up a boil in war left them to simmer and basically all run through everything else with you so so I've done so far so basically all you need to press recipe is a few ingredients you need potatoes Beth mackerel which is a gorgeous fish if done well and most people don't like things like Michael they like the cards and stuff let but please just give it a go try it once and you'll be a standard oh good this tastes so basically all have done in here is I've chopped up in half new potatoes I've left the skins on because skins are good for you I've bought them for as long as you need and what you do take a knife and give them a little stab so if they're really soft like that they're ready for a mash in and that's what we need to do now is mash them all up so easy take basically once that's turned into mash and I'll show you the next bit so imma go away now and I move this over air huh get me massively duder and i'm using tins of mackerel right guess that's all you need you just basically drain off all the excess tomato sauce and then Bob's your uncle I'll show you what I do next so I'm you're doing out drain these mash them and then we'll be back right on doing those and I've drained them off big knob a bar because you've got a lot potatoes in there when I actually board the potatoes down I added like a bit of a handful bit of sprinkling of sea salt and that just basically stops all of the the starch and stuff going into your water and your potatoes that just make to taste those so and again right now and it give this a down to mash in then we're going to open up the macro and make fish cakes the mash now is perfectly like that's beautiful then when touching a food get involved with your food my hands are clean give always give them the wash right so we're going to spin this rain there and do the next bear just basically get into macro rep and move on all right this is messy because macro intends with tomato sauce it's very oily some tomato sauce cream everywhere so dribble it out a bit there right always do this walk your tins then you won't get splashed back all over your clothes I learn that the hard way trust me right hold your macro get rid of all the little nooks bit a nurse a waste I know that is but what you want this just mainly the stuff you don't want that love war there right so once you've done that back around and maps right set aside in with the macro okay now i'm using two tins a macro so I'm using the tomato sauce one and i'm using a think it's a smoked mackerel the only reason I'm doing that is just basically you use up stuff so once you've got rid of all the source you're going to lose a little bit here tomato sauce labor so why do because you don't want a lot of moisture in that what you want it is to one is all mashed together it's not to be loose and horrible so all I do is I cheap and put some thick tomato sauce back in there so just give that little bit of a squeeze add some flavor and it's beautiful so basically again get in there mash all this together all right once that's done at the next ten now once all your mackerel smashed into mashed potato basically what you want to do get a little one like this right Pat it in your hands Pat in your hand I mean that's a bit small I'd go a bit bigger than this I'd go go down size right then once you get that like a little pate put that on a tray and it tastes gorgeous by the way put that on a tray put it in the fridge leave the chill and once your little patties like this or or chill date you can freeze them then you take this out whenever you need it out of freezer you pop this in a pan fry it five minutes on one side or less than five minutes but fry it till it's nice and golden brown on that side Freud says nice and golden brown at time best fish cakes you will ever taste now if you want to you can glaze the egg on top and give it a bit of bread crumbs but I just playing that's an extra thing you don't really need serve that with a little bit of salad on the side absolutely beautiful please don't think mmm wonder what that is gonna taste like it's gorgeous try it you'll like it and it's amazing way to use up your leftover mashed potato and a little bit of mackerel all of this now I'm probably going to get 20 of these pancakes so of each fish cake you want a little fish pancake here you're gonna get another 20 RS that's say two per meal a little bit of salad two per person with a bit salad that's uh so week's worth of food if you eat nothing but that offer you don't want to hear every day but like I'm saying all of that so you've got ten meals there for lost two tins of mac on a bag of potatoes you've got four quid for ten meals you can't beat that please give it a go you'll be immensely surprised and immensely happy with the results fish cakes homemade a vago widget and your fish cakes pull on plates and leave them to sit in the fridge and just sit and chill until they're nice and firm for about a couple of hours and then you can breadcrumbs on once the breadcrumb and they can be frozen next thing you need is three things you need bread crumbs and bread crumbs are pretty cheap to come by living quietest buy a whole packet was I think 50 pence now once you've used there you can put them back in the ones that don't actually stick to our some whisked eggs and all I do is like blend that with a hand blender because it saves me a lot of lace you don't look for these have been in the fridge now for about four hours so they've kind of kept their forms that are easier to work with and all I'm going to do is pretty much again the hands don't remember this rubbles an egg mixture there turn them over rub on a little later mixture there make sure you get the site as well tap turn if you can turn them a little bit troubling tap again then do the dude edges that's one done so that go back on the plate done and then carry on carry on carry on it's a little done and then they're ready again once you're ready to actually click on I suppose bloody lovely

Please explain how to make fake poop

hello my friends have you seen already my prank on lenka with fake poop did you like it like how did you like it No ah I didn't vlog yesterday the whole day editing this video for the mansion so if you haven't seen it just go check it I really like the reaction of lenka she was really scared from that but many of you wrote me messages how do you make this fake how can I do it so I can bring somebody so I decided I will make a tutorial it's really easy you just need a peanut butter and chocolate topping so it looks like this so now you can put it to the microwave for one minute so it looked like this just mix it a little bit now you just need a plastic bag and put it inside now you've got it like this so you need a you need to use scissors Blanka do on it's tasty its tasty you can use just a fart spray to spray it and it will make a realistic poop not like this one but the real one then you can place it on the toilet somewhere and you can wait until somebody's coming so it's really easy try it at home and prank somebody see you tomorrow guys

Please explain how to use - hemanshi's world

Hello viewers Welcome to Hemanshis world Today my daughter is sitting Next to me she is naughty girl So todays video is about a Short review on lux shower gel I got this shower gel in Just rupees 99 Yes its affordable and Aromatic I have buy velvet touch lux shower gel Its frangrance is so good I dont think you got this quality of shower Gel in market in such a nice rate Viewers it contains Jasmine and almond oil in it Jasmine oil Makes it aromatic and Almond oil gives us Smooth skin Its so helpful for Removing dryness in skin You can take it anywhere ,its easy to carry Now i m going to tell u how to open it Press the arrow on top like this And open it Now pour it as your need And thats it Its so easy to use Velvet touch is my favourite As i luv jasmine flavoured aroma You can take it anywhere Its so easy to carry in Bags or handbags Now open it like this I m pouring this on my hand Look ay its texture Its so creamy Now i m rubbing it without water Ohh its so amazing It forms such a nice foamy layer Without water Look at its creamy texture Its so soft and fresh Now i m rubbing it of with some water For more uses and benefits of showergel Do watch my next video I m going to share with you How to use this shower gel Benefits of it If you guys want to buy it I have given link in description box I hope you guys love my review Please like my review And do watch my next video For Uses of shower gel and how it makes your Skin glow and soft I hope you all like this video Please press the like button And comment below Share this video with your friends and family Keep watching hemanshis world Thankyou bbye

Please explain how to make diy oscars, academy awards inspired wire and chain chandelier earrings by denise mathew

hi this is nice Matthew and today I'm going to do another set of earrings on the Oscar theme and sort of the like a bling kind of dangle earring so what I've done is I've used a couple of relays and made a wire frame added some chain added some little charms of some rondelle's you could use any type of real as you want it to you could even use round beads if you prefer marquise cut whatever you prefer I've done the frame here if you want to shorten that you can do that as well it's really your choice you can make the chain a little bit longer or a little bit shorter the way the earrings are now there are about three inches from top to bottom but you could make them a lot shorter according to the changes you make you could use all the same colors or like I did you can do different colors so let's get started got the spool so you can just use round nose pliers but I'm using my multi level pliers so I'm just going to do a loop now I'm going to want to match it to the earring I've already made so I'm just going to look at it and see and so it's about three quarters of an inch between the loop and the and the the circle in the center so now I'm going to go I can measure it if I want so 3/4 of an inch and then go in the center going to do a little right around so this is what I would have so now I'm just gonna double check that against the other one yeah it's okay so now just go to the other side and try and do it equal amount and just do a little loop on the other side so you'd have something like this now all you need to do is just come back the wire and then you would have your friend you could hammer this if you wanted to or you could just leave it as it is I'm just gonna leave it as it is I've already cut a length of chain it's about it's about an inch and a half but you could use a longer amount of chain if you want so I just want to get to the center of this chain find the middle link so that you have equal amounts of now you can count the links if you if you want to make sure it's perfect but I find that if you just check the center it will show you put quite easily if there's one that has a longer length which this one has a longer length one link with extra so I'm just gonna cut that off because you can measure it but it usually it's not always going to be exactly equal so that's why I like to just take the middle link and then when I do that I can see that they're both exactly the same length so now that that's done of a 24 gauge wire so I'm just going to do a wrap loop one on one side and I'm going to attach that wrap loop right to that Center loop of the chain that's what I would have and then just close that loop up let's let's see what have and then after that you're just going to string on a these are a four millimeter amethyst rondell's so just string whatever kind of a beach you're using it could be a round crystal gemstone whatever you have is it will work and then after that I'm just going to do another wrap loop so just a 90-degree angle right around the pliers and then grab hold of the loop and then just wrap it in and then trim it back now this will be where you're going to attach your earring to your to your ear wire you don't have to do that right now you can just continue working on the earring so now I have the frame and so now I'm going to attach the chain to the frame so just open those loops and attach one loop it doesn't matter which side close it up and on the other side do the exact same thing open the loop and attach the chain close it up I'm gonna even have your frame attached to your chain now I'm just gonna start adding the relays I have a cubic zirconia here and then I have two Chael Sonnen C and then I have some I'm gonna do a few rondell charms so just do a regular wrap relay right through any one side of your chain your wire up and this is a 24 gauge wire but just use a wire to fit your bead you can probably use between a 24 to 26 even a 22 if that's all you have so just bring you two wires together like then at the top of the shorter wire and you do a 90 degree angle and it's gonna be away from your bead because we're going to attach the bead so the bead is hanging front way so if you put it sideways it won't hang properly so you have to do it that way so it's back okay and then just do a loop like that and then just slide that right on to your frame you don't have to use as much wire as I'm using I just had cut a length so that I had it available so I'm just gonna start wrapping down getting those two wires together and then when I get down to the tip of the bead I'm just going to start to wrap around wrap around the tip cap grab a little chip and I'm doing a fairly neat wrap so I'm just going to continue to wrap down and then go down a little way and then just bring the wire up and across right to the top still another wrap around the top and I'm just trim it back make sure you tuck in any wires that are sticking out so then you have something that looks like this so now the next thing to do is to take one of your other Brielle A's so just slide your Brielle a on and do exactly the same type of thing you're just going to do the same type of and just try and keep your your relay wraps the same as your other that your original earring that you've made so that the same and they are at the same so that's what you do and then just do a 90 degree angle and a loop and then just slide that off to one of the other side loops like that grab all of that week and then just do a wrap those two bars together right down and then right up to the top again and just a couple wraps back so this is what you would have so far and then you're just going to do the exact same thing with another relay now you start to add the little now I have these little ball head pins if you wanted to you could just do like a little bit of a loop on the end of a piece of wire so you don't have to use a head pin and then just slide a I'll just make one and just slide a bead or rondell on the end of it so that you don't have to worry about a head pin and then just do just a 90 degree angle and then I'll loop and then just slide one of those on one on each side of each Brielle a so for the center you would you just put one on one side just slide it right through the loop like that and then just close that loop back and then just do it on the other side you so just write on a headpin 90 degree angle and then just loop put that on the other side of your brie lay right and and trim so if you notice that we have one brulee on both sides and just do it on the next two alternately you could just make the brie lays ahead of time the brie lays in the charms ahead of time and then just slide them on like open those loops like you did with the chain and there slide them on if you prefer to do it that way if you find it easier you could do it that way as well so the last thing you do is just you're going to open up an ear wire and just put your ear wire slide your ear wire run and then close it up and then that would be your completed earring so this completes a tutorial I hope you liked it if you did please like share and subscribe and comment we'll see you next time thanks for coming bye for now

Please explain how to - paige & ken's diy mason jar mural - home & family

all right we are making a mason jar mural and showing us how to do that is Ken and Paige yes I'm first of all just thank you for being part of the show today you guys just brought it outside and yeah yeah songs I knew from my image to take it on the road well I've never felt so blonde in that lineup even though my singing was fantastic throw me out go back to Dollywood back glass may some caught your eye yeah so we were all in Dollywood is everywhere all of our longtime viewers know we had a great time look how much fun we had Kim what happened she's a trick knee yeah we were working like really hard long 12 13 hours so we all found solace waiting for a table at the restaurant at the hotel bar and so this was what was behind the bar yeah oh we got a little video here of it check this out now when you were up close to it we didn't kind of know what it was but then when you kind of come back you realize check this out right here this is actually a farmhouse that's so and this was wheat so close to it you're like oh just kind of cool mason jars when you could pull back it is a whole farm scene there's wheat that the sunset I'm not absolutely beautiful yeah another barn makes me told it took me like til the fourth day but I'm like oh my god there's some barbers how about we were there to even notice there's no you pointed it out I had no idea I was like wow the bottles underneath we are obsessed we were there with Dave Lowe who's the head of our promise department and we were like how do you think they did it how do you think and we asked and asked and asked if we could have one we may or may not have become very good friends with the woman but finding Dave got one down opened it up and we figured out how to do okay so we have this secret Hollywood formula how do we get started all right so what you're gonna need for this is just standard mason jars good all this is the secret ingredient folks vegetable oil I'm at the you need a photo we actually start we have a photo we started with which is just a photo from my iPhone this is a back yard at our week in place just like snap did one evening the resolution that little like sorry Marcus nice justice I don't embarrass to admit it was off my phone as opposed to core gist sent that often looks like a local Kinkos to have it printed in the size of the space you want to fill and then as that was waiting I turned it over to miss page yes alright so he said you did a 40 by 70 a piece of image yes so what you see behind here is what I put together and I got started earlier this morning which is really easy well first I marked out my studs to make sure because this is gonna be holding quite a bit of weight no not you and you are saying they're so so found the studs then I it was 70 inches long so and you can cut this any size you want I put the screws into the wall into the studs and then into the shelves and yes they were level and then taken took it from here so I picked up the print all done and what I did was I measured sort of the clearance for the inside of the jar I thought it was three by five and a quarter you want to fill the jar as much as possible but those mason jars do curb you know you don't want it you want it small enough so you don't hit the curb and then just draw a huge grid on the back of your photo with that measurement so three by five and a half going vertically and then going horizontally now here's the trick once you've done that go through and please do this number and the facts of them or you will try doing the mason jar like jigsaw puzzle yes and then just simply cut them out with the sheet of paper and you're gonna have we'd have ended up with a hundred square so one hundred little and did you pre image the color black and white well met cases so this is interesting the the dollywood one was all sepia-toned yeah this one you saw in the original photo with quite vibrant in color right i found that once you put it in the oil it mutes everything okay almost made this cps right so i say you want to go with a color photo that's maybe a little vibrant so you don't care or worry then wait a minute that's race or would it make sense to go with a lighter oil why don't you do like a grape seed oil you could if you yeah you could do grape so you don't want to do olive oil or corn oil cuz that's gonna be - this is safflower safflower so that's gonna be relatively like but you're right you can really change I was gonna say your spend so much you fill it with olive oil wait a minute rich oil did you use do you know four of these okay eighty thousand milliliters yeah this is my milk outing which we had to count this morning yes we have to do some math or other suited math so that all you're gonna do is fill your jar all right yep and very very simple and it just drops it and by the way right actual kind of paper you put it on yeah does it have the hard stock but it's just regular I was worried that it might affect the ink but you know I tested it and absolutely fine that's all your lid on and two pages point earlier make sure you put your brackets into studs because this is a lot of oil very heavy and then you look here you can see on the back I've got number 57 and I've got number 56 okay and see that so all we do yes do you want to have okay goes whoopsie it moved there we go and all you have to do is if it does move because it will move around just keep turning yours Yeah right and great with this cost you because that's how about eighty-three thousand milliliters of oil just for jugs but it's out front I say eighty thousand milli well we were talking about that one at dollar but that must have how much do you think you ten thousand dollars if you had if you had somebody come in and do that that it was huge and it was easy and it takes a lot of time but I did it in the whole the whole thing shelves brackets photo jars how's the bill liters of oil phenomena what if he could use just clear water too yeah you probably thought you'd probably copy

Please explain how to make sooji ka halwa / semolina halwa

welcome to another episode of korean beyond this is your host dolly and today we're going to learn how to make suji ka halwa the sooji ka halwa is a very popular dessert of india and it's very quick and easy to make now to make sujika halwa you will need one cup of suji which also known as semolina rava or farina you need 1 cup of sugar half a cup of butter unsalted butter you can also use ghee which is clarified butter and then you're going to need 1 4 cup of chopped nuts i've taken like cashews pistachios you can also use flavored almonds you can use golden raisins and you would need like three cups of water but to make this i begin with putting my warming my three cups of water put it on high heat and i'm going to dissolve i'm going to put my sugar into the water i'm going to warm this until the sugar dissolves in that water and i put this sugar syrup into my suji when it's been roasted next i begin by melting the butter or ghee okay now the butter is all melted now i begin by frying the nuts a little like for 30 seconds to a minute until the nuts are all roasted in the ghee or clarified butter looks like our sugar is all melted in the water dissolved in the water i'm going to turn this heat off the nuts seem to be all fried and i can get the sweet aroma of that now i can add my suji and make sure the heat is on medium low so that you don't burn your suji and you have to keep on stirring continuously save for another five to six minutes until you get a nice golden brown color and the only thing to keep remembering in this recipe is to keep stirring it continuously because the moment you stop stirring the suji or similar bellina might get burned just another 30 seconds to a minute it seems to be almost ready and you can see i've reduced the heat to a low and now i'm going to slowly and carefully add my sugar syrup to this roasted sooji be very careful and now you can turn the heat and keep on stirring this and soon the water is all going to get absorbed i'm going to give you delicious suji kahala you can also just cover it with a lid and let it let all the water get absorbed now this is your sujika halwa many people also add some color to it and they call it like the rava pastry like in southern part of india it's called as ramakeshtri because they add like a caser or a saffron color to the sujika halwa many people you can even add like saffron just infuse a little bit of warm milk and we add it to this fujika halwa too it gets a beautiful saffron color and looks more appetizing now it looks like this is almost done see also how the water is all getting absorbed slowly and surely at this point i'm going to add little bit color stir it see after a couple minutes we cover with the lid as you can see all the water most of the water has been absorbed and after a while if you let it sit on the hot stove top for for another couple minutes it's going to get much much more drier and when they make when they make it for auspicious occasions they even instead of adding water many people add milk to the case to the sooji kahalwa after about two to three minutes you can see how it has kind of absorbed all the water let's get gotten much drier this is a good consistency to keep and your semolina halwa or your tsujika halwa or rava pastry is ready to be served

Please explain how to machine embroidery, with applique

good evening everyone my name is Lindsay and I am from unique baby boutique I this is my fourth tutorial that I've made I really enjoy doing them so today we're going to be doing a tutorial on how to machine appliqué so there are many steps to machine application it can seem a little overwhelming but in reality once you get the hang of it it's bing-bang-boom you got the steps you can do it I always say I always tell my girl friends when they ask me how how much how do you do that how can you do that I can never do that I'm not crafty I was told them you never know what you can do until you try you can fail or you can succeed but you'll never know until you try so try to always have a positive outlook when you start a project I know sometimes it's hard when you're in a rush and you know you got to get things done but if you're not in the right frame of mind your projects can have not come out well you need to be ready to sew and ready to go alright so you're going to need obviously your hoop this is where all the fun happens right inside this little baby next thing you're going to need are your stabilizers now the two stabilizers that I use literally for every single project I do is going to be hell on 8:06 stitch and tear now you don't necessarily have to use this brands but this is just a brand that I think works the best I love it it's great the next brand that I use is gonna be sulky sticky and I don't know if you can see that but it has a grid on it next thing you're gonna need is heat and bond light now there's two different types of heat in lot heat and bond there's a regular coupon which is a white paper with a red where it says heating bond in red and then the purple one where it's it says heating bond alight and that's pull the light is better for applicaton so your next step is going to be to pick out your coordinating fabrics for your project the project that I'm choosing is going to be the Incredible Hulk I'm also adding a coordinating number to match so when you applique you almost never want to use just plain fabric because it will tear it will separate from the satin stitch you won't be able to have a clean smooth applique when you first start you know you'll be trial and error what works for you and what doesn't but this is what over a few years of trial and error this is what I figured out works the best so you're going to get your heat on light and you're going to iron it on to the back of your fabric so say you know I previously ironed it on to save time so you're going to cut it to size and then you're gonna iron it on from that point on you are going to take your shirt and you could either hoop or float it floating is when you hoop your stabilizers and you look the shirt literally on top of the hoop you can hear my daughter in the background floating I'm sorry hooping is when you take the shirt and you literally hoop the whole thing I personally don't like hooping I float everything I do I've made a previous tutorial on floating so if you're interested in learning how to float I would definitely watch that tutorial I'm actually gonna float this shirt really quick but I'm gonna time-lapse it up for you guys so I'll be back in a couple minutes with that you alright now that I got my shirt hoot I would like to talk about some other materials that you're going to need you're going to want to have coordinating thread colors for your fabric so most of the time like 99% of time I use Floriani thread I love it I've been using it since I started embroidering I think it works the best not to men not to say that you know say you like sulky thread I also use a lot of silky thread but you just have to figure out what works best for you I'm gonna if you can tell but it's really really shiny it's beautiful I also really like a mond thread it's a nice accord it's almost just as shiny but I feel like Floriani has a little bit more of a sheen so these are going to be the thread colors that I'm going to be using today here are my coordinating fabrics then you are going to need scissors you're going to need a good pair of embroidery scissors I have been using Kai 4 inch curved for the past 4 years someone recommended them to me because I also make felt ease for hair bows and someone recommended them for me for felt ease and I was like okay great I'll try anything because you know my scissors are so dull so there are $15 free shipping and I ended up buying two pairs that same day and I had to look back since and that was in 2013 was the last was the first pair of scissors that I um KY scissors that I bought their Chi 4 inch curved I'll post the link to on the materials that I use if you decide that you like the way that I applique excuse me I also wanted to show you this scrap piece of fabric it has the heat and bond light already on there this is what it looks like when you peel it off but I have a tub all of applique scraps I never throw away a piece that's big enough for like a piece of hair or you know shorts or a shirt or a face I try to save every piece that I possibly can because you're just in my opinion you're throwing away money when you're throwing this away this is a perfectly good piece of fabric with heat and bond light already ironed on so all right let's get to the applique if you have any questions also please feel free to ask me I love questions I'll try to answer as best as I can so I'm gonna take you guys step-by-step on the machine out okay all right so that first stitch is called a placement stitch that lets you know where you need to place the fabric the next stitch is going to be called your tack down okay so it's a little hard to see I know because I did white on white I should have done black and then white but if you can see that I think you barely can can see the outline of the three the next one you'll be able to really see it you all right so can you see that that is called a tack down all right now let's do the sign now before the signs pitch you have to trim around let me see if I can move this down my battery's gonna die properly charge it so you want to trim this is the importance of a good pair of scissors you want to make sure to trim as close as you can without actually cutting the stitches now I'm gonna be a little bit faster at this then someone else who is just beginning but it's the general it's the same idea you're just you just have to take your time and try not to cut the stitches because if you do some designs when they do a satin stitch they don't I wanted to satin stitch they just go right to it and you'll have fabric separation I'm not sure if I mentioned also that a fresh needle will completely change your project you definitely want to work with a fresh needle when you're doing when a you've been on your broidery machine all day or you know you've been using it pretty consistently for the past few days I think they say each little is good for about 8 hours but I think that also depends on the amount of work that you've been using it and that eight hours so I do a lot of in the hoop projects like I make a lot of kids masks and things like that I've been making those for a few for you know a day or so I changed my needle if I'm gonna do a shirt because it will completely change the way that your shirt looks so I'm gonna change my thread to black I'm actually gonna turn off the camera then I'll come back to show you what it looks like afterwards you all right so here is the finished shirt I hope the video was informative I'm gonna add a couple extra slides I took some pictures of another shirt that I made an applique on so hopefully I helped you guys out if you have any other questions please let me know I would be happy to assist I hope you guys is how great dang it again here is our shirt

Please explain how to make the paper plane

The paper plane is a modern classic cocktail developed by Sam Ross and the late Sasha Petroski of milk and honey fame I like to think of it as the cousin of the last word Cocktail, in that it is an equal parts cocktail with some herbal notes But just a heads up similar to the last word it also has an obscure ingredient stay with me though. It's worth it So we're gonna start with three quarters of an ounce or about 22 mils of fresh lemon juice and we're doing equal parts here So the same amount of Aperol which is an aperitif like Campari But a little less bitter and the delicious and less well-known Amaro nonino you could swap it for another Amaro But it really wouldn't be the same cocktail and then we're gonna finish with an equal parts measurement of bourbon And while we shake it's story time So according to Sam Ross this MIA track Paper Planes was a bit of a guilty pleasure of Sascha Petrowski's and the song was blasting on repeat the summer. They came up with this drink in fact They were actually creating this cocktail for another milk And honey alum Toby Maloney when he was looking for a new cocktail for the summer menu of his Chicago bar the violet hour Once we've shaken that for about 15 seconds We're gonna double strain into a chilled coupe glass and look at this beautiful cocktail You know they say you drink with your eyes before you drink with your mouth actually I don't think they say that but it sounded pretty deep anyway this cocktail deserves a cool garnish because it's called a paper plane sometimes you see an actual little paper plane clipped or pin to the side of the glass now I Don't want paper near my cocktails So we're gonna make something out of this lemon peel just gonna speed things Up a bit here what I'm basically doing is creating a rectangle shape and then sharpening out the edges And then what I'm gonna do right here is cut a little Slit down the middle then we curl that upwards and insert the rim of the glass into that little slit And we've got ourselves a nice wings you know for the paper plane you get it let's just give this a taste shall we Cheers Good lord. This is tasty. It is super well-balanced not too sweet not too bitter. It is perfect You can see how perplexed. I am that this just works so well Hey guys. Thanks for sticking with it till the end if you want to make some cocktails live alongside me I'm gonna be doing some more live classes check out my live classes link on my website And if you have any ideas for live classes that you think I should do just leave a comment below Cheers

Please explain how to make alkaline water

hey guys it's ashli with Oakland experience comm and I'm bringing you this video log today to talk about water I know summer is coming up soon and a lot of us tend to get a little dehydrated so I wanted to show you how you can make your own alkaline water at home for very cheap oh I have an alkaline water machines so I use that now but before I had that this was an option that you could do if you didn't have that machine what I get is Bob's Red Mill baking soda it's aluminum free you can also order this online in bigger bags and then what I have here is essentia water that I can get at your local health food store and this is a pH of 9.5 so this is already alkaline but if you just have regular water what we're trying to do is get a pH of 7 or above so I'm just gonna use this water today for example but it'll take an 8 ounce glass of water so I'll just pour this and then if you're using a leader you probably want to do a tablespoon of the Bob's Red Mill but about with an 8 ounce glass it's approximately a teaspoon just have to kind of see what's variable to your taste I guess not have spoons mix it just mix that up and you've got your own alkaline water at home another option that you can do if you don't have the Bob's Red Mill or have a local health food store because I know a lot of smaller towns it's harder to find some of these products like I said you can order it online or lemons are another great option make sure you just I put lemon and like everything so just cut it open squeeze the lemon in there drink away so Cheers we'll be doing more make sure you stay tuned check out the blog and we're gonna be doing more videos on the alkaline water machine and intention water which I'm really excited to bring you so stay tuned thanks

Please explain how to replace an alternator

Hey guys ChrisFix here and today im going to show you how to replace a alternator this is a really simple job that you can do yourself in most cases there's no special tools and to figure out how easy the job is going to be all you have to do is locate your alternator in my truck you can see the alternator is right at the top which makes it really easy to get to if your alternator's near the top of the engine the job is going to be simple if the alternator is buried it could be more difficult if you're not sure if your alternator is bad i have a video that shows you how to test an alternator so check that out it's really simple and you could do it yourself a link to that video will be in the description here's where my alternators having a problem when the engine goes about four thousand rpms the battery light comes on and the voltmeter that's built into my truck it just drops there should be 14.2 volts will not even getting that I'm getting like 10 volts nine volts once the RPM to about four thousand rpms so not only is the alternator shot but i'm running a large light bar up top some lights in the rear as well as off road lights in the front so I want a larger alternator to keep up with my electrical demand stock alternators 95 amps and the new alternator is a hundred and thirty amps and if you're curious to where I got this alternator I'll go put a link in description below as always that pretty good prices and they got to me really quickly so let's go get started and changing this out here all the tools you need to do the job we have a ratchet extension and different sized sockets metal wire brush flathead screwdriver and PCs and we have a torque wrench breaker bar and the only specialty tool that you don't really need but i have is this serpentine belt tool that helps get the serpentine belt off you could always just use your breaker bar or a long wrench so let's begin anytime you work on the electrical system the first thing you want to do especially when changing out the alternator take off the negative terminal on your battery make sure it's not getting grounded out now you're good to work on the alternator the next step is you need to access your alternator so try to make your life easier and make as much room as possible we really don't want to take off this coolant hose because then you get cool and everywhere but what we can do is take off this intake hose which is really easy to do to get the intake hose off there is a hose clamp right over here use a flathead screwdriver now we're just going to disconnect this hose that's over here and just wiggle this off good we come over here to our mass air flow sensor disconnect the little mass air flow sensor electrical clip we could just take this off just like that always always remove your filters you don't damage it and look at that we have easy access right here now let's go take the belt off to remove the belt they do make a special tool that helps remove belts i'll put a link in description to where you can get it you don't need to use this it's just like a long ratchet if you have a breaker bar that's kind of narrow and skinny you can use that or if you have a long wrench in this case this is 15 millimeter and what you're going to do is going to go down into the pulleys and look for the tensioner pulley so you can see right down in here we go over here the tensioner pulley is the spring-loaded pulley right there and that's how you relieve the belt tension to just go down in here get the tool on the end of the bolt of the tensioner and just take it and you pull the ratchet the tool whatever you have towards you and that pushes the pulley against the tensioner spring so you relieve the pressure and you can see now the belt is nice and loose and since we're only taking off the alternator and make your life a lot easier to just take off the belt on the alternator and i'll leave the belt popped in here so it doesn't come apart and unwrapped from around these pollies just in case if it does you can see right here it's got the diagram of how the belts rat around the police now let's go take the alternator off taking the alternator off is really easy you can check your brand-new alternator to see how many bolted has you can see one two and then one at the bottom is 3 so we're going to be looking for three bolts to take off looking at this alternator there's one there's two there's three so we're good to go before we do that I want to check the back of the alternator see what connections you have here you can see that there's three connections that this little one here got a larger clip right here and we have the positive cable coming here I usually like to get these off before I remove the alternator especially since there's plenty of room to get to him back here so let's go do that so the first cable we're going to take off is the red battery cable this is the power from the alternator to the battery runs all the way up over to the battery - 10 millimeter and you suck it over that good although our negative terminal is technically disconnected just cover this up so it doesn't groundout better to be safe than sorry you can even get some black electrical tape if you want but that's good enough ok now we're going to remove this connector and this connector flathead screwdriver might help that's one that's too now if you remove this wiring harness and move it up to the side removing the actual alternator is really easy we'll start off with this front bolt here there's three bolts total going to use a breaker bar with these bolts are kind of tough on here the original alternator cars 2001 so it's pretty old good broke that free will do the bolt that's up here broke that free and then there's one more bolt right back here okay all three bolts are broken free now we can loosen them up all the way it's one that's two and three now i can pull out the old one now what the alternator out we have this alternator bracket here and you just want to get a piece of sandpaper or in this case I have a metal wire brush and just want to clean up the connection where the alternator actually sits on here because the alternator is grounded to the block through this bracket so the better the connection to the alternator the better your electrical system will perform you also want to grab the bolts and clean off the bolts you can see here there's all this white corrosion on the threads here you want to have a good connection so it's good to clean this off and that cleaned up very nicely so we're going to get even better connection now so with all the bolts cleaned up and with the connections here all cleaned up let's go put the new alternator on as always when i'm installing two new parts i like to put them side by side make sure that they look right you can see this alternator is definitely bigger but the bracket mounting spots are the same and the alternator pulley itself is the same size so it looks like we are good to go and just for anybody who's doing this project on a Ford pickup truck or ford SUV or the mazda pickup truck mazda SUV the four hole pattern here indicates the 95 amp alternator and the two hole pattern here indicates a hundred 30 amp alternator just something good to know especially if you're looking for parts in the junkyard you're trying to find this alternator in the junkyard or something you know that's the 130 and then this is the 95 now we're going to get our new alternator put in place one thing you might consider on these bolts as anti-seize just put a little bit on and using just a little bit of anti-seize like that on the threads are just make it that much easier to get off if you ever need to replace this in the future now we'll get our top bolt in you just want to get it started now we're going to get the next to in reason why you just want to get started because you want to be able to move this alternator around to make sure you get the next bolt in its position and then this last one should slide right in just like so now with all three bolts hand tightened and thread it in we could start tightening them down you don't want to tighten them down all the way just get them snug and then we'll talk from them so now that all these are snug we're going to get our torque wrench and set it between 30 and 40 foot pounds i'm doing thirty eight foot pounds 1 2 three now all we have to do is connect these wires connect our intake here and we're ready to go for a test drive plug that in love that in make sure you have a good connection in here to use your metal wire brush just to make sure it's clean or some sandpaper whatever you got take the nut off slip the power cable over the stud and hand-tighten good but make sure you slide this protective boot over that just feels at any water and also prevents any unintentional grounding or arking good so we got our top connected connected that middle one connected and our power line connected make sure that we have our plastic piece here over the alternator it's just the heat shield that protects the alternator from the excess heat now we're just going to get the belt on the alternator and you see it doesn't fit until we pull this good the belt is on here correctly on the rest of the pulleys correctly now we can take off our belt tool just inspect to make sure that the belt is on all the pulleys correctly it's in the middle it's not on the edge plus the belt was a little loose looks good see if it's right on perfect everything looks good on the tensioner now let's put on the air intake and let's go for a rod drop our filter back in place this clicks in just like so you want to make sure that this hose goes all the way around your intake just like so there's no gap here now we can get our flat head screwdriver to tighten this down good remember to connect our PCV hose here good make sure you plug in the mass air flow sensor one last thing to do connect our negative terminal and let's go for a ride all right let's start it up and see what we get so we've been driving around for a few minutes and I'm gonna slow down here and give it gas to drop a gear and hit over four thousand rpms beautiful everything is working perfectly and that is a job well done and that's how you properly replace an alternator hopefully this video was helpful if it was remember to give it a thumbs up if you're not a subscriber what are you waiting for hit that subscribe button up on the screen are going to be a bunch of videos to get to those videos you can click on the screen or follow the links in the description

Please explain how to make polish doughnuts

my name is helena i'm louisa's mom and i'm going to make donuts today normally in polish tradition we make them on fact thursday which is like tomorrow but you know release a request today so here you are anyway so here are the ingredients first of all you need almost a kilo that's what i'm using anyway of plain flour about six yolk of eggs plus two whole eggs 100 grams of butter oh more or less 100 gram of yeast three table tablespoons of sugar and about a pint of warm milk you've got to um put some in a cup to to make this mixture and that's what i'm going to do in a minute also you need about i would say two tablespoons full of alcohol that's for later which alcohol is it vodka vodka is good plain vodka okay so first thing i'm going to make the east mixture east so here it is these are fresh yeast and you can actually use dried yeast if you want to so one sachet would do if if there are too many things here for you i mean too much of the ingredients you can have them basically you can have half a kilo flour then and instead of eight eggs you can have just four eggs or five so this mixture this is important bit so crumble that in a pot like that add a teaspoon of sugar about a teaspoon of flour tablespoon of flour yeah and warm milk which i've prepared earlier so i took some of the milk into this cup that goes in here yeah so what you do now is just basically mix it like that you know sort of quite thick and strange smelling mixture and what you do now don't forget the milk has to be warm like look warm so we put that mixture somewhere warm preferably maybe over warm stuff not too hot it mustn't be too hot because uh you know that would take 10 minutes for the mixture to grow to rise yeah so next thing i'm going to put sugar into the eggs just basically mix them well and in the meantime once the yeast mixture is rising i'm going to melt the batter so i've got all the things prepared so that should be liquid form so this is the next stage and that's what the yeast mixture should look like it has risen sort of double triple e in size okay so what we're going to do add a big pinch of salt for flour pinch then this mixture again you can make sure everything goes out of the bowl by adding some more milk so next thing you add most of the melted butter you leave about two tablespoons in the bowl for later okay like that now it's mixing time so first of all don't forget to wash your hands before you put them in in the bowl okay all right and you can start mixing yeah i know let's see what it feels like how much milk you could add to it because sometimes you don't have to use the whole it depends on the size of the eggs and you know butter and everything you can i think a little bit more if needed okay i've been working on it for about i would say seven minutes you can do it for longer but what you need to look for is um the dough comes off the sides of the ball on your on your hand as well so it's much smoother now you see it's sort of coming off the hand much easier at this stage you need to add the rest of the batter that'll make it very smooth silky soft soap and alcohol alcohol um stops donuts from absorbing fat that's why we end so if i drink more alcohol like not absorb fat that's a good thought i'm not sure about that experiment see the bow is getting clean and that's what you should aim to achieve okay look that's what it should look like little bit of flour at the top not much like that cover it with a clean cloth and put it in one place and you keep it next to the radiator will take about i would say more than an hour and a half to rise so it has to double in size so now you've got the time to sit down and relax perhaps watch lisa's show what would be answered on a bbc iplayer go for it that's what i'm going to do for the third time so let me wash my hands and i'll see you later when this is ready after the show yay look at this put it on the table did you enjoy my show it was lovely yes yes i watched it so many times already well i watched you live when i watched on bbc iplayer i think it's great i think more people should see it not just young women but you know i think it's it's perfect for for men for women my age younger older well maybe not so much older because when you talk about sex i'm not sure but i love it what they'll think anyway so you sprinkle some flowers what i've done here i put some tea towels on the work top and then some greaseproof paper on top but just to basically not to be too messy on the table so you need to tip it over like that see see what the mixture looks like okay you do need some extra flour for this otherwise it will get sticky okay so spread it out like that so it's about i would say i don't know two centimeters thick and i'm going to make um some plain donuts and some with strawberry jam plain for me please you like plain ones don't you so basically what you need is a cutter like this but you can easily use a glass or small glass or a cuppa and just do it like this cut it so these are plain ones so i'm going to put them here making them a jam so i could perhaps put some on the dough like this cover that up and cut them like that for about 20 minutes no more until they double in size okay so take that off and they are ready to fry so you've got to have about a liter of oil in a pan like this you obviously you have to be very careful with with oil vegetable oil you know so first i'm going to fry the ones without jam because they'll fry quicker and there you are like that here so i usually put the lid on and just wait until they cook how long well i don't know until they look brown well sometimes you might need to turn off it twice you know i think they are ready i'm going to take these out okay like that be careful with oil it's very hot the ones that are ready have to be coated with icing sugar just like that donuts they are delicious i must say yeah i'll have this one oh yummy

Please explain how to make bimbla sasav or raita

hello friends welcome back to puja skok recom if you are a Goan then you won't need any special introduction to this wonderful ood bimla these fruits are sorry taste and using many vegetarian recipes also we make pickle using them backing over I learn this raita or saucer from my mom and let me share it with you today let us see what all we need to prepare it I have washed his being lot three to four times using plain water let's have some water and keep it to boil it will take few minutes to soften up do not throw away the water you can use it for grinding later now in the saucepan heat about 1/2 tablespoon of oil and fry grated coconut once it is slightly brown remove out in the same pan add remaining 1/2 tablespoon of oil and fry green chillies for few seconds now let's roast some mustard seeds in the same pan cover it and was the mustard stops crackling remove it out add some jaggery and salt use the same water which we use for boiling the bimla for making the paste consistency of writer should be very thick like chutney so don't use too much water at a time after grinding for about one or two minutes at the boy bimla and grind for few more seconds take it out in a bow and enjoy as a side with rice or serve with roti thanks for watching guys please hit like comment and subscribe and don't forget to share thank you

Please explain how to clean aluminum wheels without any scrubbing

all right guys what's up i'm back at it again with another cleaning video how to basically make your chrome wheels you know this is common on every big truck all this aluminum you know you've got all this basically going to turn all of this into looking like this with no scrubbing at all look at that you can see the reflection in it perfectly look at that hi all right so basically i got another product from blue wolf again that makes this the magn wire wheel cleaner all you need is a bottle of this and a pressure washer and that's it so basically i'm going to show you how to apply it just squirt it on there like so you do the steps everything that's chrome or aluminum or aluminum either one look at that already starting a little bit you can already see my reflection in that already i mean i mean fuel tanks are the worst you need the pressure washer so look at that collection look at that that right there is crazy crazy [Applause] [Applause] [Applause] so [Applause] look at that guys you can actually see where he didn't spray actually see where he didn't spray and where he did spray on just how it makes it pop with no scrubbing i bet you if you polished that up you'd be able to see your reflection even better than that guys i mean hit them up again blue wolf mag and wire wheel cleaner peace you

Please explain how to make flubber

so welcome to ah i am a so um we're gonna make a shorter all from a lover and and then we got this tutorial from kaarina garcia and will be in this link down below awesome that subscribe share & subscribe us he's really good like a DIY the tutorial with mice and you can get these ingredients right in your pantry so you don't have to go to the grocery store to fight so they I think the Bologna is gonna be in right now is this shampoos I just use this really good this is the unbranded I don't know I just like this mom it's like it's the hair about a sentence this one shampoo this is a whip this is smells like booze Rosie flowery and then you'll need some and chlorella voyel i don't know i spec right up cuz i really like you Oh a bit a bit of olive oil it does make you're not hungry and then you'll need a mixing bowl and it's cool okay so this is have to be need for horn stars you don't need that much actually yeah but we're just glad it go and then you all just gonna need a 30 x which is optional if you don't want you can use actually um no no um powder coloring thing a thing and then you're gonna use them plastic spoon sauce cook garnet so to forsake for taking it add this the horns are he just at first two and three den dem because we're not meeting and half towel in here answer the chicken pock pock that's our favorite so then oh my god it's got to my man you're gonna stir fries move it one shot pill what is it Bennett people friend don't put it too much apparently we gonna add some oil and clerk food remember it's gonna be dry and then put olive oil in it or you can use any kind of oil safflower oil to produce the citric any kind of limb is a little like for a batch of oil yeah also going to couples are you gonna put it now stop sup so trick to be like like sorry super super life so to be like nice oh that it's not gonna be sticky you're gonna work it from outside and put it inside so like the spoon don't get any like what stop the strong lashes so this is what it looks like forever i do about 30 seconds it kind of looks a bit like it doesn't look like a camera realize it you could actually need it yet you cannot really need it yet cuz it's not very good so we're just gonna fast motion Nick baby have you there will be nothing left of a girl who never do your best oh we finally have you I'd never see the Sun stop motion oh if you catch the night out how yeah we are Joey and in that doesn't really stick Larry got a little sorry sue like out like out oh my god this one get it on my computer oh yeah i four fabulous is here so this once I spin and then once you need is gonna feels like eat it eat it it's good to hurry if they're like a bit rough but when you do this it's gonna smell I have a bunch so offline business we put but you'll color food okay I'm gonna stop motion it from wait a minute yeah I'm meeting right with the rush of them i got guys until next year why didn't and i was gonna kick stop one show you guys that's not really her sapristi brace you play not creepy may seem happy forgot Rogers is behind for watching would you like yeah

Please explain how to make pocket sized homemade vending machine- junior mints box- toy tutorial review

gene gene gene he can uh no whoa whoa hey Tina you got fans walking to the genie and gotten show so today I have something super excited to show you guys so today I'm gonna be doing a tutorial on how to make a mini vending machine look how can it is and it'll be holding these mini diced die so they are so cute more just cut them off a little bead thing just a bead so I'm just going to show you how it works and the mechanism really works so all you have to do this is nothing you guys can see Andy pull you guys you just saw ball could use a lot so as you can see I got this mini dime and and then that's inside and I can take this i'm gonna show you how I did it so let's just show you the mechanism so as the mechanism is really cool and as you can see the coin can't not get back because you can't put your finger in like a mess with your fingers like a nothing much to you thank you grab your coin let you know so let's get on with the materials you want me so come on to every yalls you on me are you only washing it to decorate and I have lots of it in here as you guys can see i use this Washington you will need a brown marker you'll need a exacto knife if you're not allowed or you don't have one of these I just recognize me using pony scissors so it can get at it but you know exacto knife just doesn't make the Box go flat when you're cutting acts are you then you will need some scissors you'll need a junior mints box like a mini junior mints box and Heartland another junior its box for extra for extra cardboard so you know have a sense of pulley thing more you know so yeah I guess you could use it out loud but that's not long enough so yeah you will make this then you lay you some clear plastic as you guys can say for the window and there's actually they're plastic on it maybe one gets a mini die or whatever you want to put in here and I recommend you put it in here is you can either make some little mini squishies you can use googly eyes or you can use beads for this so let's get started with the tutorial so the first thing you go go go go girl if you will want to get your mini to your meds box and you won't want to get your marker and draw the layout so I'm just gonna draw the layout like this so yes draw a window a window the coin slot a pulley mechanism finish and let me get the lid I don't like don't dry out you know I on then lastly the prize box which that is way too big so now let's cut it so now that you would do with a little mechanism as you can see I already cut out this flap I cut this you can see I cut out the little coin slot and I cut out the window so the next thing is you won't want to do get your other box and gun some cardboard extra cardboard and cut it to the with you think is good before pulley mechanism so if it's too big just keep going this is probably good now yeah you push it in and see if it works but also you have to hot glue two together and make sure they're the same width so cut the other one so let's hot glue i'm using my flower art blue gun today and it was just hot glue it as you can see it's hot glued now make sure not to bring yourself to gamble and as you can see it's like a lot thicker and if you want to be sad you can just do three but then as you can see you guys once you are once you're coming out this put the plate like all the way through and PO click boom still like you take it out and then you can see that little body right there you ready but those little dots and then with that there's dots you so yeah and then you get sat cardboard piece and you stick it in so yeah ok so I have our cardboard piece and you stick it in and then just stick it through the back and if it needs to be thicker make it safer that's also we get thicker Hey so now let's try come on girlie oh my goodness has pee ok so also that so no let's try this yes network so as you guys can see it just needs to go through because if it's not like all the way through or you just don't want to do that you can create a support for like a hot glue support for it but you know I mean this is like the way to go so you just pull it out and then stick back and my hair done so now what you want to do is you want to get your scissors and cut that back along so you can do the mechanism stuff just do all the stuff you need to do and as you can see you cut it open it smells minty fresh so now what we're going to do is we're going to take this piece this one a piece of my mother box oh that's good that's perfect actually so oh let's just actually get a little bit so there are this so wonder do yes I'm going to get some washi tape and I'm going to use this rainbow glitter tape that I got for my birthday and there we go if you guys so much amazing but oh so now that you're just going to take some hot glue and hot glue it and I don't Pablo it too close to the window or you won't be able to like put the window on so get some hot glue so you don't really have the whole it down just let it dry before you um hot glue this side to it so let's let it dry and you can hold it if you just want to so let's hold it now I think it's gonna be super fun I pick so I'm gonna wait till then okay so once you've done that you just do hot blue the other side and I'm just going to say something if you make your um slit to bag there and you just think it's too big for your little cardboard piece that you have right here then all you do is you just sick a popsicle stick of cut a popsicle stick and and it'll work so just some ideas for you so yeah now let's get some hot glue and put some there so we can pull off okay so and you just have to hold that you were just like this until it's dry so yeah let's away yes I can and this is going to be a really fun whoa huh it's up top yeah and I'm just going to be making it hold like I'll make it hold a bunch of other stuff back but I'm gonna make it hold that I'm gonna be making it hold like mughal-e-azam over here is I'm going to make it in making it work with beads over there so it's pretty dry so now what you want to do is the coin slot is not big enough as you guys you can see it like that's how big the point that is so all you see all you have to do is like you get over this is just Tuesday facility then you go with this side of this little excess in play that oh and there so now what you're going to want to do you can make a time little bucket for the coin to fall like I'm gonna do but reserved for this one if you just want to be a little more simple you can just put a little cardboard piece just hot glue at you know whatever you are feeling so I'm just going to take some of my box and you're going to cut off the excess and I'm going to make a little tiny box so let's do it so I have two little pieces and I'm going to visit for the sides but so now I need to there and then this can be the bottom so let's just hot glue everything's together now so first I'm going to get some hot live for this piece as you can see so let's let this be solid right the baby's okay that's good now now let's do the studies that that is a little much but you ok so now let's let this one dry for a little bit longer because I put a ton of hot glue I want an accident whoa looks when it is doing it is suing it all day this is the fun to play ok so awesome guys I forgot to mention guess what this is gonna be to my mouse house my mind tells ok ok now yep and you can just make like little cardboard pieces if your wats like you know like little corporal pieces for the coins we just decorate some cardboard pieces you know they create it up with that people yeah it's super excited cork box go box box box box info ok so here's a little box think I just so cute thank you grab mm-hmm since the box is okay so far so let's make it you think you do it the next one so this might need to be a little bit about gonna so now we're just going to do that and it'll catch the beam this is such a cute little box so now I'm going to let it dry and I'm going to hot glue it or just actually just set it like hot glue it littler literally like on the ground so it can hold it so so while you were waiting for it to dry you can decorate this but some washi tape and I'm gonna use this because I love this watch this although it's a little see-through what's wrong besides got it the perfect lift oh and i forgot to mention thank you guys so much for a thousand subs I'm so so so yeah ok so now since this is giraffe I'm going to hot glue it under and you guys I really encourage you to make your own because this is a tutorial so look at that there's lots of loosing knocked upon the trust me i have before it really hot no but really have a scar on my leg um so yeah it's drying so let's wait for it to dry it if you want you can just push it down ok so now it's good but so Wow let's make this is there so now we're just going to stick this little back in here see how it works look how cute whoa this needs to be thicker look at that look at all that space they have whoa lots of space so let's all have to do if you just it's just too skinny hmm I have to do this like make it better ok make it thicker so I need to make it like this that yep perfect so what you got will do was an area like my slipper really long so now we're going to just save it with ya okay so that will be like for about what's up though and now just take it out and I know I don't think you're going to use two of them so now I'm just going to do the backside make it all off ok not bigger Longer ok so now that I don't that I'm just going to put a little tape over it it don't fret if you make it too skinny it's fine just everything's gonna be all about ok so now we're going to do this and now just cut off the excess ok so now let's save so I'm just going to put it everyone so it turns out you do need two layers because I just some like hot gluing another layer on because it just like goes all floppy floppy floppy to be so well and me three so you just run into some problems here so now let's try carpet and now we're just going to put this in oh ok so i put it through and just turn the zoo so now yes since we've gotten the mechanism down and this kind of like it closes it so now we're going to try and see if it works so just make sure it works before you decorate it cuz you don't know waste it doesn't if it doesn't work but I have a feeling it will so let's put one in there let's just put a little piece of paper and I will make little coins and i'll show you how to make the coins let's put it in there then pull the switch up fake and just put it back in and then look so it's super fun and it's just so so amazing so let's try it again this concedes it's in there and then and get it will it fell out the back so it works so now i'm just going to take this little piece out and i'm going to decorate it um I'm think I'm going to decorate it with some washi tape because i feel that i'm going to look great with with all right i'm going to decorate with this because it seemed like washed a bad that actually like covers real well liked and it doesn't show through so you know okay so about one and I will be back once i'm done decorating it with the washi tape so it is really fun so let's decorate you I'll get everyone so I hope you guys enjoyed this tutorial but now I'm going to show you how this works and see if it works so let's get started so let's play are just going to put a little cardboard piece in and that's plastic is I don't like so you should rough all in there one already felt okay so now we pull it and literally there will be a lot on these old let see that and then you get a lot for what you're paying girl so then you wiggle them all out and however even I got a ton of them so that's how it works and let me play it one more time just gonna restock it whoa yeah took like all of them so let's restock it and some of them actually went in the money place but let's be in the clinic we did phone any thoughts that's good so I'm just going to stick another little cardboard piece in there and now let's pull it out whoa I got times so it really does work so I really love this aight it's a really smart and fun idea so i hope you guys enjoyed this video and this is like just such a fun tutorial so i really recommend this to just try it because it's really simple and easy hi everybody

Please explain how to bake scallops

hi I'm Fredrik Forester from celebrity chefs and also newly crowned national for the year 2011 and I'm here today to demonstrate recipe before you food lovers out there ok I'm going to show you how to make so clear scallops with tomato and olive dressing and rockabillies and palmer then race simple dish very quick dish that you can create for parties or you know people coming around so it should be good so the first thing I'm gonna make is the basic to masala dressing so you just take your tomatoes add your olive to that add your olive oil I remember you're making a very light dressing here so you do wanna you know put too much oil so it's too oily but just enough to sort of a coat or the other ingredients touch of lemon juice a little bit of balsamic vinegar a little bit of salt and also some fresh pepper mix all that in have a little taste of that we're looking forward the vinaigrette is to be very much slight bit of acidity bit of all yunus but not too acidity or not too oily unit so make a nice balance is what you're looking for the rocket leaves I'm gonna actually sprinkle or soy direct drizzle in a little bit of olive oil later on OK and the rid of them lemon juice as well and then also just put my palmer then cheese just running through the rocket these later on at that very very last moment next job we're gonna do is cook the scallops cooking scopz is a tricky job i'll say really too many people tend to overcook this scallop so you could be very careful very very hot pan is required seasoning at the last minute okay and just cook them on both side to the golden brown okay and it should be slightly translucent when you take them out the pan otherwise they're just too dry okay so very hot pan olive oil just goes in enough olive oil to cover the base of the pan is what you need you're not deep frying the squabs here okay so just be aware of that just enough to cover the surface scroll up so you got six halves here little bit of salt on the surface and the basis up and then paste them into the pan one at a time very important when you're cooking scallops there you hear that noise if you don't boil your hopes otherwise there's nothing worse than having boiled soft scoff that should be beautifully roasted beautifully colored and very very crisp on the outside and very soft in the center so once they go into the pan we frame from moving the pan to anytime but otherwise you take the heat away from the pan there for boiling us up so I'll leave that alone for a while to cook nicely so basically you need about a minute on each side to cut the squab sufficiently all the way through obviously again you know their timing depends on the size of scope that you have so your Seattle treat them accordingly it's a little bit smaller obviously little bit less and bigger obvious a little bit more so because these scopes are pretty thick in the center I'm now gonna pop them in the oven for like 45 seconds to cook them all the way through okay the oven basically is quite high some 180 degrees about guest mark 7 to 8 okay well the scope search in the oven I'm just going to finish up the salad mount just place a little bit of the parmesan shavings into the rocket leave a little drizzle of olive oil little bit of pepper but not too much touch of salt and a few drops of lemon juice just mix that around and this dish will make really a great sort of summer starter it's really addition itself because we really need my sauce with it that's fine so you have your salad ready if any bits ready to go are we waiting for now off with your scopes that come out the oven and then we're gonna dress from there okay Scott's an that cooked okay I'll take them out of the pan and place them to a a drainage plate that's it and now I'm ready to actually finish the actual dish itself so I'll take my pan fried scallops and I'll place them around the outside of my presentation plate look how beautiful and golden brown these folds up then you take your dressing and you just spoon that basically over each scallop finally just take your dress Rockette leaves and out go into the center of the plate presentation is very very important so just try and get a nice height on your rocket leaves here people eat with their eyes got to impress them make sure your plates nice and clean and that's how to do road squats with to Martin or your dressing rocket and parmesan

Please explain how to heal herpes outbreaks naturally

>> A real herpes heal , can there be one? >> that is the question. >> The answer is yes, there is a true herpes cure >> and you can treat herpes with elements >> provided by nature and nature only, >> you don`t need to fall for >> a pharmaceutical drug business >> that wants you as a customer for life. >> Using the natural cure for Herpes >> is better than getting supplements and medicines. >> And you see, the path to true recovery >> doesn't have to be difficult. 00:00:49.000,00:00:54.000 >> What if you could instantly stop herpes 00:00:54.000,00:00:57.000 >> using a simple and powerful >> one minute cure? >> Follow the link below for more info !

Please explain how to remove a rear cassette

I said here from dirt magazine this time we're going to show you how to remove and fit cassette may seem like something pretty simple to a lot of you but there's also a lot of riders you've never done it before and although we like to support your local bike mechanic and I think this is one of those jobs that is so simple that you should be doing at home really and save yourself from money and you only have to buy a couple of tools once and that's it I would say same as any other tool by decent tool at last you for ages and won't damage other stuff so all you need to do this job is a cassette lock ring tool which looks like this and a chain whip which you actually use removing it and then something like an adjustable spanner or something to hold the cassette lock ring tool okay so the reason why we need a chain whip is because this tool goes in here to undo the lock ring and we want to undo it that way but as you can see the cassette your spins so we need some way of holding this cassette still which is what the chain wit does so once we hold that we can hold it still it's simply case of unscrewing it like that take your lock ring off and then this simply pulls off like that you get a few different designs of cassettes this one's made up with a couple of different spiders that hold various clogs and then you've got a few loose ones at the end the crucial thing to remember is that with these loose ones you get little spaces in between them and you need to make sure that you've got those spaces in otherwise you gears obviously won't work because your cokes will be too close together you also get some other cassettes that are completely loose like this so all the cogs are loose so you need to make sure all those spaces are in as to any difference between the designs if you've got an aluminium freehub body than the ones which don't have all these loose cogs are sometimes better because they don't dig into the freehub body and mark it and sometimes thinking a little bit jammed from that so now we'll go back to putting on the cassette so when fitting cassette you might go to see that all these things different spaces now the way I do it is to look for this fat gap here there's a thin bar next to it and then you want to find the equivalent part on the cassette which is there as a fat bit and it'll slide on there and then the next one and the next one with most freehub bodies and cassettes you can't actually fit these cogs the wrong way around and they can only go on one way with that factor in there there are a few rare exceptions where you can but in general as long as the writing is on the outside of the set to you know it's the right way around that one isn't so it wouldn't fit on but it will fit that way around and then the final thing to note is that on this last sprocket all these other ones slip all the way over on this last one it's got little stops here now occasionally we certain cassette some freehub tolerances that those stops will bottom out on the end of the freehub body before the actual cassettes tight so this little wobble around if that's the case you need to go to your local bike shop and try and get a little fine spacer like this and you put this behind the cassette the first thing you put on and that will take up slack in there it's not that common but sometimes you have to do it then ideally you put a little bit of grease in these threads just to make sure nothing ceases and then you can literally do this up you don't need the chain whip and you want to do that up nice and snug there we go cassette fit it all ready to go simple as that the other thing I'd say is you can get various types of chain whip basic part one to be honest does the job brilliantly you might find if you've got an old chain with actually that some of them are fitted with quite fat chain you can actually fairly easily replace this chain with looking modern 10-speed one if you're finding it's not fitting in your cassette it's jamming pacha part one's just got bolted in bits there and come for your handle then you've got some designs like this you niall one which have a spring in it which stop sir and base it just helps the chain keep in place and stops it flicking off and then a fairly recent addition and pretty it's quite expensive in there about 40 or 50 pounds this is Pedro's voice whip which is basically a pair of mole grips that clamp onto the cassette is a brilliant bit of kit but really probably only suitable for workshop use just because of the cost of it but yet apart from that any of them will work and you just need that other cassette tool

Please explain how to make a hi-low top

in this tutorial I'm going to be showing you how I took this oversized thirsted blouse and made it into a cute hi-low top I'm starting off by cutting out the shoulder pads because this sure did have shoulder pads and that just kinda makes it looks outdated so I'm just cutting them out you can do this with basically any kind of top you can even do this with a t-shirt but since I am using a button-up long sleeve blouse and the sleeves are really baggy on me I'm actually going to cut off the sleeves so you can decide what you want to do with your sleeves it's up to you so I'm just cutting off the sleeves right near the seam so it still looks clean okay so now that I have this lease cut off I'm going to make it into a high-low stop meaning that the front of the shirt is shorter and the back assured is longer so I'm grabbing it by the buttons and laying it out sideways if your table doesn't have buttons just grab it by the very middle of the front of the shirt lift it up and lay it out sideways and flatten it out perfectly this is a key part of this technique make sure all the seams at the bottom and on the sides of the shirt are lined up perfectly my top already has slits cut in the sides so it kind of does half the job for me but I'm going to show you how you can do it without the slits as well you're basically going to be cutting an S shape into the shirt start cutting at the point of the shirt where you want it to be shorted go across the front of the shirt and dip down and create a curve mine already has the rest of it cut for me but you would just continue cutting down like this now when you lay your shirt out normally it should look something like this and you're done you subscribe to be updated of new videos like this video for more like this one check out my online clothing store find me on Twitter Tumblr and Instagram and thank you for watching

Please explain how to remove & replace the 1955-1956 chevy ignition switch | danchuk usa

hi I'm Mike Morgan R&D specialist here at Dan Chuck today we're going to show you how to remove and replace the ignition switch from the dash the reason we're replacing our switch today is because it's actually broken the bezels broken off and the keys was lost so it's stuck in the on position so anybody could start the car the first step will be to take out your tumbler put the pin put the paperclip in the hole turn it to counterclockwise it'll pop right out the next step will be to take your ignition switch removal tool line it up with the tabs on the nut turn it counterclockwise and that comes right off set those items aside now you're ready to pull the switch from the back of the dash once you get out of the dash the next step is to take the wires out of the switch you can refer to the assembly manual or mark them where they were when you started once you get all the wires done take it out and put it aside grab your new switch start hooking up the wires make sure you push the connectors on until they click insert the light-socket the next step after you have all the wires plugged in is to put it up through the back of the - into the hole like that after you get it into the - put the bezel in the nut on there's a little tab on the side of the switch that fits in a notch in the - then we take the bezel and nut put it on the front after you get your nut finger-tight you can use the ignition switch tool to tighten it the rest of the way after you have it tight the next step is to install the tumbler there's a little tab here that fits into the same shape inside the switch it pops right in and you're done for more tips please check out our Dan Chuck USA channel on YouTube thanks for watching

Please explain how to wash your hair in braids

hey guys so I'm going to show you how I wash my hair in braids washing your hair and brace is great if you have medium to long hair that handles easily or if you have thick hair or if you want to cut down on your wash day routine I've been doing this for several months now I can honestly say that I will not return to washing my hair in free form alright so let's get started I am using cream of nature shampoo which I mix in an applicator bottle with some water and if you don't have a shampoo applicator bottle I highly recommend that you get one it just makes everything so much easier and it's a great tool to use when you're washing your hair in braids and it honestly changed my life I'm not exaggerating alright so now you've probably noticed that my hair is in quite large sections and the roots are very loose I did this on purpose as you can see I'm washing the hair and I'm able to put my fingers through through the hair in order to get to my scalp so that's what I'm doing right now it's also missing easier easier to apply this shampoo into directly through your scalp was using the applicator bottle alright so yeah just watch us normal and with the braids I did it in like big sections as well you don't need to do it in small sections because you're just washing your hair so doing it in big sections and even it really loose at the root helps to really get your fingers at your scalp so that you can wash properly say I just continue to wash us normal and the water and the soap or their shampoo rather mixed together will naturally slow down into onto the hair shaft so you don't have to worry about applying the shampoo directly on the braid so yeah that's what I usually do like the hair the shampoo flows down so then I just use that to wash the actual braid and don't worry it actually it actually works it's not like it's not working if you undo the braid you'll see that there's there like silk does shampoo lead us on there so it really works and yeah I'm closing my eyes because at that point there's probably soap in my eyes probably done through my eyes um comment below do you always get shampoo in your eyes whenever you wash your hair because I do every single time all right so now that I'm finished washing I'm going to use a microfiber towel those are the best I got mine from Amazon and microfiber towel the difference between that and a regular towel is that it absorbs the water a lot quicker because this is very very sick when you feel it it's very sick so you have to squeeze the excess water from my hair before I apply the deep conditioner sort of what I'm doing right now and then what I actually do is I wrap my hair with the microfiber towel IRA I wrap a section of my hair so that's out of the way and then you know at the same time it is working on getting rid of some of the water in my hair squeezing it out so then I use the honey miracle hair mask by tgin and that's like my tea conditioner of choice so I take out the braids because I am going to detangle my hair after I applied the deccan conditioner so is that the point where I do tangle I take out my braids and there are barely any not actually definitely it was pretty tangled but um you know would have been even more tangled if I had just washed it freeform but see it's like pretty stretch still more than usual so then I go ahead with my other microfiber towel I squeeze out even more excess water because I don't know I feel like putting these conditioner in my hair I need to do that in order for the cream to go penetrate into my hair the I apply it from roots on you from n roots and then I actually do a bit of finger combing first finger detangling and then I go ahead and I hold the section of my hair so then I'm all done I am going to put my hair in a cap I love this new conditioner in for about 35 to an hours in five minutes in an hour and I also wrapped my hair with this microfiber towel just to keep all this again you know and I do it again with the other microfiber towel that I have yeah Dustin I'm all done thank you guys so much for watching and I hope you learned something and this cuts down your wash day for you and yes

Please explain how to clean your home in two hours | 2 hour cleaning plan | clean with me

I think I was on Pinterest scrolling and I came across an article from domain.com sort of amended it and tailored it to this is what I would clean if I only had 30 minutes this is what I would clean if I only had an hour and this is what I would clean if I only had two hours and it works really well if you have people stopping by it works really well if you're getting ready to list your house and you have to have it shows ready so I'm gonna go ahead and share it today I really appreciate you guys coming over and watching let's get into it people usually fall into two categories either they're a tidier or they're a scrubber whichever category you are in your house definitely looks cleaner to people a little stopping height everything is picked up so this is the best place to start I like to set a timer and justment as quickly as I can I follow the word my broom method I just carry a laundry basket back and forth between rooms and give everything rehomed as quickly as possible make the beds your entire bedroom could be a complete disaster but if your bed is made everything just looks that much cleaner so this is usually a good second step do the dishes it doesn't matter if you hand wash them it doesn't matter if you put them in the dishwasher or if you make your kids do them there is nothing better than a empty sink and it just gets the dishes off your mind swish and swipe the toilet I clean my bathrooms on Monday so I have to get too far into it today but I could just go ahead and quickly wipe it down wipe down kitchen and bathroom countertops and you have everything cleaned up this really does not take that long I like to use just a microfiber cloth and hot water I'll use Windex sometimes take out the garbage and diffuse essential oils taking out the garbage is a great way just to remove any additional odor and there are some essential oils that are known to help purify the air like eucalyptus and lavender I favored essential oil it's definitely sweet orange i diffuse it all the time it just feels very welcoming it has a very like clean and fresh scent vacuum I'm a little like the princess and the pea and that I can feel a crunchy from a mile away so for me vacuuming is like the quickest way to make everything feel clean best common area surfaces I like the spray from method it's an ascent almond it's incredibly effective and it smells amazing is one of my favorite cleaning products mahp kitchen and bathroom floors I'm just using my Steam Mop I like it because I don't have to put any chemicals on the floor and I am always shocked at what I'm able to get up with this I'm using soft scrub to clean my showers and tubs that usually leaves been in for and water but saw scrub has some bleach component to it which i think is really good for every once in a while you're going to go a commercial way I always suggest soft scrub if you're gonna go more natural I think vinegar any better it works really well next I'm just gonna wipe down the interior mirrors and my appliances these things are the things that tend to show dust the most so it also helps get your home shining the quickest throw in a load of laundry we are we're in a middle of a potty training thing so towels are sort of our best friend such that it quickly fill in an extra load and it just gets with one more thing off my list thank you so much for following along today I would love to hear your comments and below especially if there's something you would do different there is no cleaning you go here and really do appreciate all of your feedback

Please explain how to use calipers

how to use calipers this is a pair of digital calipers calipers are used to take precise measurements this one has a few buttons on it we got the on/off button and an inches / millimeters button importantly when it's closed like this it needs to be at zero and you can reset it to zero by pressing the zero button so now it's ready to measure these are the outside calipers to measure the distance from one side to the other of an object so you put that object in between them and you can measure so if I want to measure how wide my iPad is I stick the ipad in between the two of them press it together and I'll get a measurement or reading so it looks like it's about 672 thousandths of an inch also inside calipers measuring the insides of objects like holes can use them to measure the inside of this hole for protecting the camera on my ipad looks like it's a little less than a quarter inch about 220 3000th of an inch more information on calipers wikipedia has a great website

Please explain how to...make a killer mexican fried egg sandwich

then the beach with your license every day don't let anybody we got some refried beans some salsa one cage-free egg so Colby jack cheese some bread hey Mike foster here how you doing today it's a Mexican fried egg sandwich remember I'm the fried egg sandwich King I can make a sandwich with fried eggs about anything in the house and this time I'm going to put together this killer-diller Mexican fried egg sandwich okay we got a medium pan little butter one egg that's what I'm talking about right let's just go for a couple of minutes then we'll flip it it's that easy little pepper this baby's ready for a flip flip it shut it off cover it with cheese cover the top let that melt we got slightly lightly buttered toasted bun let's start putting this baby together we're going to spread on the refried beans now you can make these yourself I'm working on a recipe for these these are just a can now a little salsa there you go - that right there there's that baby put it down right here yes well I think we need to add just a little more salsa on top because it's Mexicans all right flip it give it a delicate press let's slice it let's reveal it there it is let's get it closed up and a big buddy or there it is you can see the layer of beans the egg the salsa big bite coming up today's killer fried egg was Mexican and it's hot the salsa is just tied up in a creaminess of those beans oh the eggs cooked perfectly this cheese works man goodbye half the sandwich um killer-diller try this one for more videos like this check out live life 365 this was good and subscribe to my youtube channel by the same same name until next time peace I stolen it's sliding all over the place tell the truth now huh only nothing my salsa

Please explain how to make a chocolate monster truck fail

curtis finish your drink you've had one glass hi everybody i'm chris i'm curtis some of you may remember the easter video from last year that was a disaster this year i've set the bar a little lower thanks i'm gonna tell you how to make a chocolate craft and i know that it's a little late for easter easter was over a week ago certain people took a little while i got a monster truck well okay it's supposed to be a monster truck but this just looks more like a regular tom so i got this mini eggs this chocolate bunny chocolate eggs bunnies and a little baby my mommy are we gonna be okay no what i want to do is actually make this look like what it was supposed to look like i've melted a bit of chocolate in the microwave kind of like last year but this time no food coloring because we all know how that turned out i'm just going to pimp out this chop you got anything to say yeah that shit's gonna be crazy he's new you're not gonna put that in there we'll see what i can piece together from this train wreck it looks really creamy and so it makes me happy creamy things make you happy step one microwave chocolate not all at once do it in 20 second increments and then stir it so that it doesn't burn 28 seconds what happens if i do it for 29. no i said 20 seconds oh this is not how i expected it it's like on a peg like how do you are you kidding me this needs a little work what oh my god it melts in your hands this is my friend happy do you want some i'm gonna cut off this stupid little thing down here oh this is easier than i thought oh now we have a standing monster truck sort of what is it called when you raise the wheel jack jacket when the wheels are what are you doing like it it's not represented in any way on the box how misleading can't deal with this second part i want to cut the wheels off oh my god i'm breathing i'm trying to cut the wheels off and i'm cracking the rim i'm serious don't bump it because it'll get blurry oh my god you were like instead of cutting the wheel off this piece has broken off but i think that we can glue it back together with our chocolate glue this is the glue i fixed it okay okay i'll do it here oh i broke the thing that we fixed what did i just break i want to like raise it that's what if we cut open the window no don't cut that all i wanted is for my mom to love me and this is what your option was you can build up some chocolate here the wheels are in the line that's your concern is the wheels aren't aligned guys i'm gonna chill over here right now and pretend i'm not about to die i miss your mommy shut up i forgot the craziest thing of all pre-built eggs curtis the side with the cameras on it don't put it on the side the viewers can't see do you want to see what's inside oh god oh look i need an egg we can fix this we can fix it i take it back we cannot fix this we still have the technology all we have is chocolate that melts when you touch it this is wrong what is your standard for right i'm naked i don't things work in reality like they do in my imagination the entire side of the truck just split open it we can fix this we're not gonna cut it we can't cut it look there we go baby bunny can ride and why is this still melted we melted this like an hour ago don't cover the only color that's on the thing this is melting in my fingertips kind of like your dignity right now don't wave that in my face hey guys it's not hot wheels it's super wheel and make a tower of mini eggs beautiful this is the most beautiful thing i've ever seen you've got an idea oh it only took 10 years are you making an archway because you know it's gonna fall no because i know it's gonna work and succeed i picture this so much cooler in my head the bunnies were like riding it like they were pants and now it's like what that was my life's work that's really beautiful what you made i'm glad that your personality comes out after a couple drinks this is not what i pictured when i said let's make a monster come on mama tuck time come on you want a necklace did he call you back no he didn't let's cut a little more i have the best idea ever i'm gonna cut her eyes out and replace them with something more beautiful like mini eggs maybe she's born with it maybe it's mini hands what the did you do that's not a star that's a jewish star that has too many points just don't want it i just like sneezed all over oh baby it hurts me when you oh god you're useless how am i supposed to know what the mom and i need this is the perfect edition congratulations to us oh my gosh if you broke the arches i would have killed you well it's not focusing what's the best name for it monster truck bunny mummy monster mummy can you say something inspirational i see the patch we made when the entire truck this has been another ridiculous easter i hope you enjoyed it

Please explain how to tie your lularoe into a bow!

hey guys I am super excited to be able to show you a new technique that I just learned on how to tie your lularoe into a bow it's super simple lots of fun what you'll need for this is three hair ties I like to use the clear rubber bands because you will be able to kind of see them they'll be on the top of your fabric so what you're gonna do first is take your first rubber band and you're going to pull some fabric over I'm wearing a lularoe Carly right now but you could do this with other oversized items so you're gonna pull some fabric and you're gonna make a big loop here I like to do it on the opposite side if I'm wearing a Carly I like to do it on the opposite side of the pocket okay so then tie your rubber band over that first gather okay like this then what you're gonna do is you're going to pull over some more fabric and you're gonna make another one right next to the loop that you just made okay you'll see that I pulled it over right I'm gonna grab my second rubber band and I'm gonna loop it over the next one okay so now you have two bunny ears of sort alright so now what you're gonna do is you're gonna take your third and final rubber band you're gonna gather these two together and you're going to wrap that rubber band over the two this one needs to be pretty tight so if I'm using a small rubber band I go around three times OOP that one broke grab another one here okay we wrap it around step that one broke too one more time here this one stretched out already all right wrap it around okay now fluff out those gathers the way you like them and then take the middle section of your gather here you're actually gonna pull it up and over and you're going to stick it underneath the rubber band that you just wrapped around okay so I stuck it underneath and you're gonna do the same thing with the bottom side so go ahead and grab the rubber band underneath and push it through and there you have it now this one's really over exaggerated because I wanted to show you but you can do it smaller you can do it bigger you just kind of play around with it as you can see it's lifted up my Lulu Carly so it looks really cute with colorful leggings it's a lot of fun it's super simple and there you have it how to tie your lularoe into a bow hope you loved it

Please explain how to do your first enema at home | tips for you on doing your first enema at home

hello Joanne Bonnie Java here from freedom mompreneur by design calm things never go as planned so this morning I just finished at my very first time at home and in this video I'll share with you some tips and tricks that I learnt having done my first enema I was going to walk you through the experience and just to make sure that I do share all the things that I learned with you just really quickly if you are new to my channel my main focus is just helping people to get started quickly and effectively here on YouTube and also to leverage video marketing to share their message and their business yes so that they can get in front of their ideal market and client I'm also an associate for an amazing not traditional company called ISO Jetix and so I just share my journey in hopes of inspiring others to make better healthy choices alright so today was my first enema and I have to say this morning I woke up and I was pretty in good energy I was starting to get hungry because as you know if you watch my last video in terms of how I prepared I am did the last two days and so I'm starting to get a little bit hungry um yesterday I took a trip to Whole Foods and bought spring water for the enema I had sea salt or either already at the house with me so that was good and I also bought some things I'll show you later in terms of what I'm going to be consuming after the enema so the morning I woke up and I said things never go as planned and I wanted to get my kids out of the house my middle son wasn't feeling well my younger son wasn't feeling well and so they ended up staying home with me today and I was trying my best to distract mounds like again to the bathroom and peace to do this myself that didn't work either so that's something that I would say if you have kids like myself try your best either have someone strike them or get them off to school or to guard me on the day that you're looking to do it I didn't feel like during a ball movement and I think I'm gonna be because I was fast last couple of days so I did drink a large glass of water just to help to flush my system out I love drinking a large glass of warm water with a few drops of lemon every morning it feels fantastic and I can actually see a nice feel it in terms of my body gehenna a nice shower from the inside as I was preparing I didn't quite get the the hook so I am actually holding a bike for par most of the time of water was emptying I didn't get the clamp either so I'll share my oopsies later I just want to show you after the thought and so this is how the clamp should be I mean it looks so simple duh but I didn't quite get it so there you go you just slide it on and then you can really get a good clamp while you are getting the water into your body or and I did it the opposite way and I just I didn't get a good clap so I was today I was holding a bottle hogs and I could like dung a little bit and then pause and readjust and then hold it I got to get all the water in me really helped me during the entire experience is um I I love udemy courses and I found a few really great frequences that I like and so I just literally had a few videos up that I played and I played them within the time that I thought I need to have it in my body so I did too for about 15 minutes and I also actually thought about all those times that I had diarrhea and I didn't want to come out so I could really clap when I was um mmm when I was holding the water in and moving around and massage in my so I found it really good one thing that I did I school set up in their tub I should set up on my bathroom floor with a towel I didn't want to have that extra ledge to go over okay something happened so I found just having my bathroom at and then a towel over that and I have a picture that I'm my thumbnail I found that worked very well from um mistakes that I made what well I was doing it it's just after I got all the water in me I forgot to clamp the hose so that there wouldn't be any back fill and when I was cleaning up and actually my youngest son he just doesn't like to be apart me when he's feeling unwell so he ended up be in the bathroom eating outside the room now feel like you will see him and uh he like stepped on the cord and so I played with it after the thought and I noticed that because of that there was like some dirty water he's doing around the floor this is my youngest son here Joshua say hi Josh all right um and so big tip put your clamp on after you get all the water into your body that way you don't have any bye yeah this is why I was dealing with to join my journey I am he was my love me during my enema he's three years old going on four okay so when they put the minister kind of wrap this up since he's here he's gonna be a bundle of energy for me what I'm having right after my enema is this amazing drink I'm um uh look at this hanky that I found at home butcha with a lot of grains in it and actually chlorophyll if you don't know Ashley Klem in world wars when they were running low on blood ran right out of life there isn't chlorophyll as their transfusion was really good I wish you to have I also bought this from Whole Foods it's kimchi and I'm lending a few shots because when you do an enema one of the things you do lose its that really good bacteria so that's why I'm having the kombucha and that's why I'm having the kimchi throughout the day the second and the last thing I'm doing is because I fasted two days before to eat my body packages to eat my body back into eating real food is I'm actually gonna have a shake and I'm going off of dairy time during an on tear shape I'm going to add some of the amazing Ionix supreme to that as well so today basically right after I'm having the kombucha then a couple hours later I am having a shake with a weight look at me and really oh yeah it's cool with the ionics and then lemon house concert I bought some organic salad with some beets and whatnot and sprouts and just having around to chew very well over that couple of days it's really going to be shakes soups and salads just again to ease my body on a lot of blogs that I - and I saw it one of the blogs that I was you know you want to cut your high fiber so I'm going to be doing some no all right good cook it myself so overnight Joshua Wong is on the computer can you just keep quiet for a little bit please yeah so that's it I was lying to me off to here if you are looking to prepare an enema any question I should have covered to put my other video preparation I talked about - cared mom of three here what can I do just do my best and then you know what I think scientists certainly may be that I have being vegan I struggle with eliminating bread so I'd love to know any suggestions you have for alternatives for bread because that was my first one I went a little bit too high on carbs so I'm looking for solutions to make sure I keep my carbs low and and avoid bright as much as possible all right I'm gonna let you guys go cuz you cuz you guys a handful if this video was entertaining for you I'd love a like if you found value in the kind I shared I love a like and a ball can you check out my other videos and I'll see you next time yes I'll be doing this on a weekly basis including at least one day of fast before so lucky the Thursday last Friday morning I'll call it my Friday freedoms and do the enemas in the morning pleasure being with you guys thanks for a little bit of your time particularly with my engaging young one here Joshua say goodbye Joshy keep Tahoe I'm talking when I once said buddies like what and I'll see you next time

Please explain how to do it / joy us garden

hi it's now and I'm glad you've joined me at my work table today surrounded by sense of areas and pots which lead you to believe that I am going to do a transplanting job actually I'm going to do three and I call this the Sansevieria switcheroo now I dug this out of my garden in Santa Barbara it's an integral pot the soil is literally down to here so this is going to go into this pot and then let me see it's going to sit inside this decorative pot here and then this one I'm going to take out the Glade pot and it's going to be directly planted into this one that I spray painted yellow because I want a few accents of yellow in my living room and then I'm going to do this as a separate video because it's a little more of an arrangement I just don't want to this be too long I'm going to plant the Tri Fossey otta with the two ah Sansevieria moonshines into here so I will immediately get rid of these three and get going on these two another reason why I wanted to do this video is sometimes ffensive areas will just do do this here where for whatever reason the leaf will just bend over all the way that one's not been over quite all the way but what happened to this one that I successfully propagated is it did it bent in it was just like falling out all the way there and I find that sometimes the end ones just do that it's not anything wrong with the plant it is just the nature of the beast so you can just heal it off and propagate it it does work it is the end of the day and it's really hot but I want to get these projects done before the real heat strike so this floor rent is just looking a little pale to me been in this spot a while I just want to give it a oh oh and boy I can tell this is going to be a job but I'll start by using the old knife I just take a dull and then a dull knife and I am nothing too sharp because I do want to save this pot I don't have a lot of Oz in in the pots and I like to have them just in case I want to propagate something or who knows I'm always hot and cutting something lot so in case I need a pot I will have Nathan I kind of like this funky old terracotta box boy this is a going to be happy to get a new home and you don't have to rush to transplant sense of areas they actually do a better window pop out but this one is really tight I can tell so but I think going to come out pretty evenly after I get this all done okay not nearly as much of a struggle as I thought I'll see if I can just going to lift it up there we go ah I love it when that happens and the next I'm going to use is about 3/4 potting soil and about 1/4 succulent and cactus mix I want to use that just because it's going to be directly planted in here so I want to make sure the drainage is really really good because you don't want to keep stance of areas too wet at all they don't like it they rot out really really fast so you want to make sure whatever makes you use drains really fast and then of course I will put some a little bit of compost in there not too much I don't put as much compost into my interior plants as I do the exterior plants and some worm compost and hopefully all that will help this plant to grow more because I can tell it really really wants to they're just wrapping right around there and it'll ah hopefully um just make the color not so a bleached out deep it it out a little bit and bring out those wonderful yellow stripes that this plant has there you can see those really thick you Vicki this is about the third video I filmed on a hot afternoon thick rhizomes uh with the roots growing off of them and then that's why you don't want to over water because the rhizomes and also also the leaf store water to it and the roots even though they're not nearly as thick they store some water too okay we had the plant spill a little bit obviously I'm going to need to clean the pot up but this is going to tell me how much I need to put in so here's the here's where the plant is going to go right to their right so above there so then I have to fill it up to about here with soil I'm just going to etch a line right there because there's a little bit of spray paint in there I can share just a little bit now what I'm going to do is I'm going to put about an inch of compost in here and just mix a little bit of it and I will mix some more as I go along - there we go okay so we'll see how close I came what I'm going to do is just loosen it up the roots are pretty easy to loot to loosen up yeah you know there we go let's say just put it in like which ones we want to be the front I've thought up I've got a couple pots down here so I'm tripping and falling all over everything oops nope I need to raise it up by about a couple of inches okay so I have the mix all in the pot is a little dirty as you can see but I'm going to wipe that down and this is a whole leaf that just went just like that and I've done a whole video about propagating a Sansevieria from a whole leaf rather than just dividing it or cutting the leaf into into sections and as you can see it works and there's actually new growth coming out there so now I just have to decide where I'm going to put it I think we're going to put it right over here big because there's some room back here so I was waiting because I was waiting to finish up that video because uh I wanted to put that dissolute leaf in here and I'm going to leave the steak in for just a little bit because as mixes it is loose so there we go there there you can go back and join your mother plant aren't you happy great beautiful okay so now it's time to top it with a little worm compost okay whew hot see back to my head is all spitting oh well so I got to try saucy otter out of the pot because I wanted its grow pot and I was going to get this one out I don't think I even need to I think I just don't get kind of thing here because there's not that much soil in it you go say no you're a bad plant mama what your tis yes you will be a whole bunch heavier I'm just going to shake off some of this because this is really not good soil at all and it's it's going to get that same mix it's going to get that mix of potting soil mainly with a little bit of succulent mix and some and some compost too okay so same thing with this one I have it raised up to the height I want it but now I just have to go in and still around the sides and get it to stand up straight so I got the pots all cleaned up my grimy fingerprints and all the mix that I spilled over is off I'm going to put these on just on my patio table overnight to let them just kind of settle and it's early evening now so I will give them a good drink tomorrow or the next day and then bring them in the house but I love this bright yellow color just because I love yellow and I also think that it brings out the you know the variation in the snake plants too so stay tuned because I have the sense of area try Fosse otta and moonshine video coming up very soon I've done quite a few videos on snake plants and watch those too I will link a couple of them down below and as usual there is a blog post that goes along with this video so I hope you have found this video to be helpful my sense of areas are going to be happy as can be and when you transplant yours yours will be also I thank you so much for all your likes and your subscribes I really appreciate them now let's get out of the garden or out of the garden let's get into the garden whether it be outside or inside and make our world a more beautiful place I think I need to go have a so I have a swim I'm hotter anyway oh that didn't sound this what didn't sound right I mean I'm sort of a hot mess or something like that I'm just covered in dirt anyway I thank you so much for watching I have a lot more videos coming your way so stay tuned and I will catch you in the next video bye

Please explain how to clean,fillet and cook trout.in real time.

hi today I'm going to show you how to prepare fill it and then cook this beautiful rainbow trout and the dish I've chose to cook with this trout fillet is a fantastic trout Phillips with mushrooms and some crushed peas now mushrooms have got a great affinity with trout and I did a video on trout and mushrooms a while back you know it wasn't in the best quality so I thought you know now we're in HG or remake it you know and this is going to be ten times better than that original video so first of all I'm going to move these bits and bobs out the way and I'm going to show you how to prepare this fantastic rainbow trout okay so I'll take my trout let's move those ingredients out of the way put them over there a bit and this unfortunately is a farm rainbow trout but I mean they're really responsibly fond over here they're cracking fish but you know or you hunting shooting fishermen out there I'm sure you've got some in the freezer somewhere or you might have caught some today so you know use the same technique and if you don't want to use trout now a nice summer fill it or to be quite honest sea bass fill it sea bream any nice firm flesh fish will be brilliant with this dish so I'm going to position the camera and zoom in a bit so you could have a real good look what I'm going to do so you slope your fish head to the right you can see there there's it's vents its anal vents all you do put your tip your knife in you go all the way up to the head I'm pretty much straight away you've exposed the inside this is a lovely clean fish as you can see basically get your arms in there I pull the gills out as well and that is pretty much it done I'm just going to loosen up up blood line which I'll show you how to do and then we should give it a washed off and we'll fill it I'll just show you in there then what I mean that blood line there's a blood line just running along the back backbone just check you the tip your knife you haven't got to go too deep in and all you're doing is scraping it away and that is pretty much ready to be fill it in so I'm going to wash up under the cold tap get rid of that blood let's fill it here now trout to me are one of the trickier fish to fill it purely because if they're fresh like this they've still got a bit of that slime on so what I tend to do is I tend to fill it these with the head on purely so you've got some into old on - you know else you'll never do it and all we do like all my other videos you just put a nick in there by the neck ends and you get your knife in and you find you can look in there that backbone which is there and all you do then is one good movements all the way down to a tail and there you have one perfect fill it and you can see how clean that is there is no meat left on that bone and it's funny how we call meat meat and fish meat anywho let's carry on what we do we flip it over make that incision again and then snap in to the backbone you can see in there move that so you can see and then again you can hold in that head not a lot of pressure on nice and steady all the way down let's fill it number two you can see how clean that is not enough left for my poor old woofer fantastic right what we going to do now clean up that slide between these up a bit so along that back the fins because we basically took it off perfect clean in one go just trim it up same with this side and what I'm going to do I'm just going to square this fit it off so on that prime bit I can go in and stock but it won't go in the stock will go in my dog because it loves fish so bloody bones just gently cheat them out I'm going to square that off you're left with that fantastic looking almost professional looking finish so we do that other one smooth out the way have to show you those belly bones you can see just on the top of my knife there holding them back all the way along square it off like I said this ain't going to waste some of it will go to stock but obviously my water likes to eat a bit of fresh fish don't we often on to get our tail off same size so you might as well just put that one by there and there we are to bone this trial Philips are ready to rock and roll now this dish is like all my other dishes simple that's why I've got them on here you know I want you guys to try it I mean they all look complicated on the plate but that's the beauty of them it's so so simple to do so there's my lovely fill it's looking like a Rothko painting ready to go and in here an old-school English half line graph I've got 150 grams of frozen peas now I'm going to attempt to cook this in real time it should all come together in about 10-15 minutes so into my pleas you can see now I'm just going to add enough water to cover we're going to get those boiled in until they're tender take about three minutes so I'm just going to add a little bit sugar just to sweeten them up you know that lovely flavor so we'll get those going and once they have tenderized we will drain them we'll stop cooking them off and then we get on cooking that beautiful trout Phillips right three minutes nice and tender so obviously a train goes off quickly and then I'm going to leave them to one side so in that pan I'm going to put in another butter and we're going to slowly start sweating down the skillet right let's get a decent knob of butter what about between 50 and 100 grams can we get that in there melting down further till what the French call again beurre noisette and then we're just going to gently start sweating oceanauts in the meantime I'm going to get the pan on we're going to start cooking those trout fill it and then I want to get the other pan on and we're going to do the other dimension to the dish which these beautiful mushrooms we're going to saute in butter and we're going to build the dish a nice heat full of peas on the place our lovely trout and then tops for these fantastic mushrooms so that's coming down nicely so I'm going to get that in just gently the adding color get those cook it off slowly so my shallots sweating down take my lovely mushrooms I'm just going to have them so that simple as we throw a bit bigger into three this is going to be lovely like I said I did a video with trout and mushrooms it was really popular you know it's such a good combination really is I mean I might even add a bit of chilli to those mushrooms you know give it just a little bit every not too much not over the top just to give it another dimension so they're browning nice feet add 150 grams of cooked beans to it 150 mil of fish stock run them seize now and salt now we're going to move this pan over to the right so I want to start on these mushrooms and these trout so it all comes together fingers cross all at once okay so you can see now got my peas on it the back there just gently tick it over and I've got these two pans on ready for the mushrooms and the trout now the dish around just a tiny bit of oil I put a bit on the fish as well just to get the seasoning to stick and then I want to put a bit of olive oil in there bit of olive oil in there it's that easy and then just another flutter into each one one in there when they're and of course the butter won't burn now because we put that olive oil that's it it's got a higher burn temperature than the butter so I'm just going to season each our boys pack up some salt and hopefully hopefully hopefully hopefully this will all come together in one go and that would be cool right see in my world my butter melted lovely in their own and butter in there so what we're going to do put our mushrooms in then here chutney lay off in it push it down to get a good contact this is really fresh is one there's two I'm going to attempt to keep the camera running so you can see it's better mealtime nice contact and beta D cut that two or three-minute skin side and then obviously finish it off and then flesh size forget me watch ready now this that tastes what oh yeah get out a bit more so now with these Twix cooking mushrooms is having plenty of room nice little hot pan and then rock him you can see it's easy when you know how and you can do this at home you know each time you watch me do this in real time you know as far as doing it for the camera so you know you've got plenty of time you can put that first keep it warm cooking mushrooms keep them warm you know and then you sprout finish it off and come on just build the dish don't know what is I mean I can defeat a Panama Springs under the just some chili flakes in there already no fish for fish slugs a little cooking now makes not a minute right I like feeling on the shoes I have I want to have a bit of ice set my fish I can get it in tents the clock oh yeah get up and that one give it a minute outside in the meantime it blend up with these boys that's what you all right little conservative please do bit of integrity fly to the peas are in assume the mushrooms are in the top four that is all cops time to plate like let's do this spotlight on the dish here's my lovely crushed pink pureed from the course that fish top makes its own sauce look it up what a colors that amazing skip this fish excuse me a minute put one piece apart then we'll set that one out and then with the mushrooms will just gently cut them into their out a couple on there I haven't got the shakes I'm just trying to get off the spear and that my rainbow travel fill it with crush peas and mushrooms there's the finished dish now doesn't that look stunning the peas mushrooms wrong that is amazing and that trout get a bit out get the trail out is what you want it's cooked to perfection as per usual you know Carm oyster is in there let me just show you that fish with a spoon okay that come moist it is okay it's like we almost know what I'm doing those peas which cuts through the oiliness mmm listen I've got to go away me too please please give it a go i crispy skin mushrooms fantastic thanks for watching make sure you try this take care