Transformers documentation

Load adapters with 🤗 PEFT

You are viewing v4.33.2 version. A newer version v4.38.2 is available.
Hugging Face's logo
Join the Hugging Face community

and get access to the augmented documentation experience

to get started

Load adapters with 🤗 PEFT

Parameter-Efficient Fine Tuning (PEFT) methods freeze the pretrained model parameters during fine-tuning and add a small number of trainable parameters (the adapters) on top of it. The adapters are trained to learn task-specific information. This approach has been shown to be very memory-efficient with lower compute usage while producing results comparable to a fully fine-tuned model.

Adapters trained with PEFT are also usually an order of magnitude smaller than the full model, making it convenient to share, store, and load them.

The adapter weights for a OPTForCausalLM model stored on the Hub are only ~6MB compared to the full size of the model weights, which can be ~700MB.

If you’re interested in learning more about the 🤗 PEFT library, check out the documentation.

Setup

Get started by installing 🤗 PEFT:

pip install peft

If you want to try out the brand new features, you might be interested in installing the library from source:

pip install git+https://github.com/huggingface/peft.git

Supported PEFT models

🤗 Transformers natively supports some PEFT methods, meaning you can load adapter weights stored locally or on the Hub and easily run or train them with a few lines of code. The following methods are supported:

If you want to use other PEFT methods, such as prompt learning or prompt tuning, or about the 🤗 PEFT library in general, please refer to the documentation.

Load a PEFT adapter

To load and use a PEFT adapter model from 🤗 Transformers, make sure the Hub repository or local directory contains an adapter_config.json file and the adapter weights, as shown in the example image above. Then you can load the PEFT adapter model using the AutoModelFor class. For example, to load a PEFT adapter model for causal language modeling:

  1. specify the PEFT model id
  2. pass it to the AutoModelForCausalLM class
from transformers import AutoModelForCausalLM, AutoTokenizer

peft_model_id = "ybelkada/opt-350m-lora"
model = AutoModelForCausalLM.from_pretrained(peft_model_id)

You can load a PEFT adapter with either an AutoModelFor class or the base model class like OPTForCausalLM or LlamaForCausalLM.

You can also load a PEFT adapter by calling the load_adapter method:

from transformers import AutoModelForCausalLM, AutoTokenizer

model_id = "facebook/opt-350m"
peft_model_id = "ybelkada/opt-350m-lora"

model = AutoModelForCausalLM.from_pretrained(model_id)
model.load_adapter(peft_model_id)

Load in 8bit or 4bit

The bitsandbytes integration supports 8bit and 4bit precision data types, which are useful for loading large models because it saves memory (see the bitsandbytes integration guide to learn more). Add the load_in_8bit or load_in_4bit parameters to from_pretrained() and set device_map="auto" to effectively distribute the model to your hardware:

from transformers import AutoModelForCausalLM, AutoTokenizer

peft_model_id = "ybelkada/opt-350m-lora"
model = AutoModelForCausalLM.from_pretrained(peft_model_id, device_map="auto", load_in_8bit=True)

Add a new adapter

You can use ~peft.PeftModel.add_adapter to add a new adapter to a model with an existing adapter as long as the new adapter is the same type as the current one. For example, if you have an existing LoRA adapter attached to a model:

from transformers import AutoModelForCausalLM, OPTForCausalLM, AutoTokenizer
from peft import PeftConfig

model_id = "facebook/opt-350m"
model = AutoModelForCausalLM.from_pretrained(model_id)

lora_config = LoraConfig(
    target_modules=["q_proj", "k_proj"],
    init_lora_weights=False
)

model.add_adapter(lora_config, adapter_name="adapter_1")

To add a new adapter:

# attach new adapter with same config
model.add_adapter(lora_config, adapter_name="adapter_2")

Now you can use ~peft.PeftModel.set_adapter to set which adapter to use:

# use adapter_1
model.set_adapter("adapter_1")
output = model.generate(**inputs)
print(tokenizer.decode(output_disabled[0], skip_special_tokens=True))

# use adapter_2
model.set_adapter("adapter_2")
output_enabled = model.generate(**inputs)
print(tokenizer.decode(output_enabled[0], skip_special_tokens=True))

Enable and disable adapters

Once you’ve added an adapter to a model, you can enable or disable the adapter module. To enable the adapter module:

from transformers import AutoModelForCausalLM, OPTForCausalLM, AutoTokenizer
from peft import PeftConfig

model_id = "facebook/opt-350m"
adapter_model_id = "ybelkada/opt-350m-lora"
tokenizer = AutoTokenizer.from_pretrained(model_id)
text = "Hello"
inputs = tokenizer(text, return_tensors="pt")

model = AutoModelForCausalLM.from_pretrained(model_id)
peft_config = PeftConfig.from_pretrained(adapter_model_id)

# to initiate with random weights
peft_config.init_lora_weights = False

model.add_adapter(peft_config)
model.enable_adapters()
output = model.generate(**inputs)

To disable the adapter module:

model.disable_adapters()
output = model.generate(**inputs)

Train a PEFT adapter

PEFT adapters are supported by the Trainer class so that you can train an adapter for your specific use case. It only requires adding a few more lines of code. For example, to train a LoRA adapter:

If you aren’t familiar with fine-tuning a model with Trainer, take a look at the Fine-tune a pretrained model tutorial.

  1. Define your adapter configuration with the task type and hyperparameters (see ~peft.LoraConfig for more details about what the hyperparameters do).
from peft import LoraConfig

peft_config = LoraConfig(
    lora_alpha=16,
    lora_dropout=0.1,
    r=64,
    bias="none",
    task_type="CAUSAL_LM",
)
  1. Add adapter to the model.
model.add_adapter(peft_config)
  1. Now you can pass the model to Trainer!
trainer = Trainer(model=model, ...)
trainer.train()

To save your trained adapter and load it back:

model.save_pretrained(save_dir)
model = AutoModelForCausalLM.from_pretrained(save_dir)