code
stringlengths 35
6.69k
| score
float64 6.5
11.5
|
|---|---|
module buffer (
i,
o
);
input i;
output o;
endmodule
| 6.861394
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {(~ue[4]), ue[3], ue[2], ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= Aop;
B <= Bop;
if ((!halt)) begin
IP <= ((IP + length) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], (~ue[3]), ue[2], ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= Aop;
B <= Bop;
if ((!halt)) begin
IP <= ((IP + length) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], (~ue[2]), ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= Aop;
B <= Bop;
if ((!halt)) begin
IP <= ((IP + length) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], ue[2], (~ue[1]), ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= Aop;
B <= Bop;
if ((!halt)) begin
IP <= ((IP + length) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module decoder (
in,
out
);
input [2:0] in;
output [7:0] out;
reg [7:0] out;
always @(*) begin
case (in)
3'b000: out = 8'b00000001;
3'b001: out = 8'b00000010;
3'b010: out = 8'b00000100;
3'b011: out = 8'b00001000;
3'b100: out = 8'b00010000;
3'b101: out = 8'b00100000;
3'b110: out = 8'b01000000;
3'b111: out = 8'b10000000;
endcase
end
endmodule
| 7.018254
|
module test;
reg [2:0] in;
wire [7:0] out;
decoder m1 (
in,
out
);
initial begin
$dumpfile("deco.vcd");
$dumpvars(0, test);
$display("in1\tin2\tin3\t\tout0\tout1\tout2\tout3\tout4\tout5\tout6\tout7");
$monitor("%b\t%b\t%b\t\t%b\t%b\t%b\t%b\t%b\t%b\t%b\t%b\t", in[2], in[1], in[0], out[0], out[1],
out[2], out[3], out[4], out[5], out[6], out[7]);
in = 3'b000;
#10;
in = 3'b001;
#10;
in = 3'b010;
#10;
in = 3'b011;
#10;
in = 3'b100;
#10;
in = 3'b101;
#10;
in = 3'b110;
#10;
in = 3'b111;
#10;
end
endmodule
| 6.635152
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], ue[2], ue[1], (~ue[0])};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= Aop;
B <= Bop;
if ((!halt)) begin
IP <= ((IP + length) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module top_module (
input [15:0] a,
b,
input cin,
output cout,
output [15:0] sum
);
wire [2:0] con1;
//in BCD addition, if sum of digit BCD numbers is greater than 9 then we should further add 6 to the result to obtain the correct solution
//ex : 5+3 = 8 = 0000 1000 obtained by 0101+0011
// 8+9 = 17 = 0001 0111 obtained by 1000+1001+0110
bcd_fadd B_add1 (
a[3:0],
b[3:0],
cin,
con1[0],
sum[3:0]
);
bcd_fadd B_add2 (
a[7:4],
b[7:4],
con1[0],
con1[1],
sum[7:4]
);
bcd_fadd B_add3 (
a[11:8],
b[11:8],
con1[1],
con1[2],
sum[11:8]
);
bcd_fadd B_add4 (
a[15:12],
b[15:12],
con1[2],
cout,
sum[15:12]
);
endmodule
| 7.203305
|
module top_module (
input [31:0] a,
input [31:0] b,
output [31:0] sum
);
wire con1, con2;
add16 adder_1 (
a[15:0],
b[15:0],
0,
sum[15:0],
con1
);
add16 adder_2 (
a[31:16],
b[31:16],
con1,
sum[31:16],
con2
);
endmodule
| 7.203305
|
module top_module (
input clk,
input resetn,
input [1:0] byteena,
input [15:0] d,
output [15:0] q
);
always @(posedge clk) begin
//this is an active high synchronous reset
if (resetn == 1'b0) q <= 1'b0;
else begin
case (byteena)
2'b00: q <= q;
2'b01: q[7:0] <= d[7:0];
2'b10: q[15:8] <= d[15:8];
2'b11: q <= d;
endcase
end
end
endmodule
| 7.203305
|
module one_bit_FA (
input a,
b,
input cin,
output cout,
sum
);
assign sum = a ^ b ^ cin;
assign cout = (a & b) | (b & cin) | (cin & a);
endmodule
| 7.125037
|
module top_module (
input [99:0] a,
b,
input cin,
output [99:0] cout,
output [99:0] sum
);
genvar i;
one_bit_FA FA1 (
a[0],
b[0],
cin,
cout[0],
sum[0]
);
//this is a generte block
//The loop generate construct provides an easy and concise method to create multiple instances
//of module items such as module instances, assign statements, assertions, interface instances
//In essence generate block is a special type of for loop with the loop index variable of datatype genvar.
generate
for (i = 1; i < 100; i = i + 1) begin : Full_adder_block
one_bit_FA FA (
a[i],
b[i],
cout[i-1],
cout[i],
sum[i]
);
end
endgenerate
endmodule
| 7.203305
|
module top_module (
input [4:1] x,
output f
);
assign f = (x[2] & x[4]) | (x[3] & x[4]) | (x[3] & ~x[1]);
endmodule
| 7.203305
|
module top_module (
input a,
b,
output out_and,
output out_or,
output out_xor,
output out_nand,
output out_nor,
output out_xnor,
output out_anotb
);
assign out_and = a && b;
assign out_or = a || b;
assign out_xor = a ^ b;
assign out_nand = ~(a&&b);
assign out_nor = ~(a||b);
assign out_xnor = ~(a^b);
assign out_anotb = a&&~b;
endmodule
| 7.203305
|
module top_module (
input [3:0] in,
output reg [1:0] pos
);
always @(*) begin
if (in[0] == 1'b1) pos = 0;
else if (in[1] == 1'b1) pos = 1;
else if (in[2] == 1'b1) pos = 2;
else if (in[3] == 1'b1) pos = 3;
else pos = 0;
end
endmodule
| 7.203305
|
module top_module (
input [4:0] a,
b,
c,
d,
e,
f,
output [7:0] w,
x,
y,
z
); //
//Concatenation needs to know the width of every component (or how would you know the length of the result?).
//Thus, {1, 2, 3} is illegal and results in the error message: unsized constants are not allowed in concatenations.
//The concatenation operator can be used on both the left and right sides of assignments.
wire [31:0] concat_reg; //raise an error when work with reg. Reason unknown???
assign concat_reg = {a[4:0], b[4:0], c[4:0], d[4:0], e[4:0], f[4:0], 2'b11};
assign w = concat_reg[31:24];
assign x = concat_reg[23:16];
assign y = concat_reg[15:8];
assign z = concat_reg[7:0];
endmodule
| 7.203305
|
module d_ff (
q,
q_not,
d,
clk,
rst
);
output q, q_not;
input d, clk, rst;
reg q;
assign q_not = ~q;
always @(posedge clk, negedge rst) begin
if (!rst) q <= 1'b0;
else q <= d;
end
endmodule
| 7.310086
|
module bcd_counter_d (
count,
clk,
reset
);
output [3:0] count;
input clk, reset;
wire q1, q1_not, q2, q2_not, q4, q4_not, q8, q8_not;
wire q2_d, q4_d, q8_d;
assign q2_d = (q8_not & q2_not & q1) | (q2 & q1_not);
assign q4_d = (q4_not & q2 & q1) | (q4 & q2_not) | (q4 & q1_not);
assign q8_d = (q4 & q2 & q1) | (q8 & q1_not);
d_ff q1ff (
q1,
q1_not,
q1_not,
clk,
reset
);
d_ff q2ff (
q2,
q2_not,
q2_d,
clk,
reset
);
d_ff q4ff (
q4,
q4_not,
q4_d,
clk,
reset
);
d_ff q8ff (
q8,
q8_not,
q8_d,
clk,
reset
);
assign count = {q8, q4, q2, q1};
endmodule
| 6.613933
|
module counter_tb;
reg clk, reset;
wire [3:0] count_jk, count_d;
bcd_counter_jk UUT (
count_jk,
clk,
reset
);
bcd_counter_d UUT1 (
count_d,
clk,
reset
);
initial #300 $finish;
initial begin
clk = 0;
forever #5 clk = ~clk;
end
initial
fork
reset = 1;
#2 reset = 0;
#3 reset = 1;
join
initial begin
$dumpfile("6-19.vcd");
$dumpvars(0, counter_tb);
end
endmodule
| 7.169317
|
module binary_couner_4_par_load (
a_count,
c_out,
data_in,
count,
load,
clk,
clear_b
);
output reg [3:0] a_count;
output c_out;
input [3:0] data_in;
input count, load, clk, clear_b;
assign c_out = count && (~load) && (a_count == 4'b1111);
always @(posedge clk, negedge clear_b) begin
if (~clear_b) a_count <= 4'b0000;
else if (load) a_count <= data_in;
else if (count) a_count <= a_count + 1'b1;
end
endmodule
| 7.253272
|
module binary_counter_64 (
a_count,
clk,
clear_b
);
output [7:0] a_count;
input clk, clear_b;
wire [3:0] low_nibble, high_nibble;
wire c_out0, c_cout1;
binary_couner_4_par_load m0 (
low_nibble,
c_out_0,
4'b0000,
1'b1,
high_nibble[2],
clk,
clear_b
);
binary_couner_4_par_load m1 (
high_nibble,
c_cout1,
4'b0000,
c_out_0,
high_nibble[2],
clk,
clear_b
);
assign a_count = {high_nibble, low_nibble};
endmodule
| 6.540334
|
module binary_counter_64_tb;
reg clk, clear_b;
wire [7:0] a_count;
binary_counter_64 UUT (
a_count,
clk,
clear_b
);
initial #700 $finish;
initial begin
clk = 0;
forever #5 clk = ~clk;
end
initial
fork
clear_b = 1;
#2 clear_b = 0;
#3 clear_b = 1;
join
initial begin
$dumpfile("6-20.vcd");
$dumpvars(0, binary_counter_64_tb);
end
endmodule
| 6.540334
|
module d_ff (
q,
d,
clk,
rst
);
output q;
input d, clk, rst;
reg q;
always @(posedge clk, negedge rst) begin
if (!rst) q <= 1'b0;
else q <= d;
end
endmodule
| 7.310086
|
module d_ff (
q,
d,
clk,
rst
);
output q;
input d, clk, rst;
reg q;
always @(posedge clk, negedge rst) begin
if (!rst) q <= 1'b0;
else q <= d;
end
endmodule
| 7.310086
|
module mux_2x1 (
y,
x,
sel
);
output y;
input [1:0] x;
input sel;
reg y;
always @(x, sel) begin
if (sel) y = x[1];
else y = x[0];
end
endmodule
| 6.925133
|
module d_ff (
q,
d,
clk,
rst
);
output q;
input d, clk, rst;
reg q;
always @(posedge clk, negedge rst) begin
if (!rst) q <= 1'b0;
else q <= d;
end
endmodule
| 7.310086
|
module d_ff (
q,
d,
clk,
rst
);
output q;
input d, clk, rst;
reg q;
always @(posedge clk, negedge rst) begin
if (!rst) q <= 1'b0;
else q <= d;
end
endmodule
| 7.310086
|
module mux_4x1 (
y,
x,
sel
);
output y;
input [3:0] x;
input [1:0] sel;
reg y;
always @(x, sel) begin
case (sel)
2'b00: y = x[0];
2'b01: y = x[1];
2'b10: y = x[2];
2'b11: y = x[3];
endcase
end
endmodule
| 8.288733
|
module d_ff (
q,
d,
clk,
rst
);
output q;
input d, clk, rst;
reg q;
always @(posedge clk, negedge rst) begin
if (!rst) q <= 1'b0;
else q <= d;
end
endmodule
| 7.310086
|
module mux_4x1 (
y,
x,
sel
);
output y;
input [3:0] x;
input [1:0] sel;
reg y;
always @(x, sel) begin
case (sel)
2'b00: y = x[0];
2'b01: y = x[1];
2'b10: y = x[2];
2'b11: y = x[3];
endcase
end
endmodule
| 8.288733
|
module ex_6_35_j_tb;
reg load, shift, clear_b, clk;
reg [3:0] par_in;
wire s_out;
ex_6_35_j UUT (
s_out,
par_in,
load,
shift,
clear_b,
clk
);
initial #200 $finish;
initial begin
clk = 0;
forever #5 clk = ~clk;
end
initial
fork
clear_b = 1;
shift = 0;
load = 0;
par_in = 4'b0000;
#2 clear_b = 0;
#3 clear_b = 1;
//load 0001 into register
#10 load = 1;
#10 par_in = 4'b0010;
//start the process of converting number to it's 2's complement
#20 load = 0;
#20 shift = 1;
#70 shift = 0;
join
initial begin
$dumpfile("6-35-j.vcd");
$dumpvars(0, ex_6_35_j_tb);
end
endmodule
| 6.543473
|
module d_ff (
q,
q_not,
d,
clk,
rst
);
output q, q_not;
input d, clk, rst;
reg q;
assign q_not = ~q;
always @(negedge clk, negedge rst) begin
if (!rst) q <= 1'b0;
else q <= d;
end
endmodule
| 7.310086
|
module up_down_counter (
count,
up,
down,
clk,
reset_b
);
output [3:0] count;
input up, down, clk, reset_b;
reg [3:0] count;
always @(posedge clk, negedge reset_b) begin
if (!reset_b) count <= 4'b0000;
else if (up == 1'b1 && down == 1'b0) count <= count + 1'b1;
else if (up == 1'b0 && down == 1'b1) count <= count - 1'b1;
end
endmodule
| 7.520907
|
module up_down_counter_tb;
reg up, down, clk, reset_b;
wire [3:0] count;
up_down_counter UUT (
count,
up,
down,
clk,
reset_b
);
initial #300 $finish;
initial begin
clk = 0;
forever #5 clk = ~clk;
end
initial
fork
reset_b = 1;
up = 0;
down = 0;
#2 reset_b = 0;
#3 reset_b = 1;
#30 up = 1;
#70 down = 1;
#100 up = 0;
#140 down = 0;
#160 up = 1;
join
initial begin
$dumpfile("6-35-l.vcd");
$dumpvars(0, up_down_counter_tb);
end
endmodule
| 7.520907
|
module t_ff (
q,
q_not,
t,
clk,
reset
);
output q, q_not;
input t, clk, reset;
reg q;
assign q_not = ~q;
always @(posedge clk, negedge reset) begin
if (!reset) q <= 1'b0;
else if (t) q <= ~q;
end
endmodule
| 6.889794
|
module ex_6_37_a (
count,
clk,
reset
);
output [2:0] count;
input clk, reset;
reg [2:0] count;
always @(posedge clk, negedge reset) begin
if (!reset) count <= 3'b000;
else if (count == 3'b000) count <= 3'b011;
else if (count == 3'b011) count <= 3'b001;
else if (count == 3'b001) count <= 3'b111;
else if (count == 3'b111) count <= 3'b110;
else if (count == 3'b110) count <= 3'b100;
else if (count == 3'b100) count <= 3'b000;
end
endmodule
| 7.072841
|
module ex_6_37_b (
count,
clk,
reset
);
output [2:0] count;
input clk, reset;
reg [2:0] count;
always @(posedge clk, negedge reset) begin
if (!reset) count <= 3'b000;
else begin
case (count)
3'b000: count <= 3'b011;
3'b001: count <= 3'b111;
3'b011: count <= 3'b001;
3'b100: count <= 3'b000;
3'b110: count <= 3'b100;
3'b111: count <= 3'b110;
default: count <= 3'b000;
endcase
end
end
endmodule
| 7.214011
|
module d_ff (
q,
d,
clk,
rst
);
output q;
input d, clk, rst;
reg q;
always @(posedge clk, negedge rst) begin
if (!rst) q <= 1'b0;
else q <= d;
end
endmodule
| 7.310086
|
module ex_6_41 (
out,
clk,
reset
);
output [7:0] out;
input clk, reset;
wire a_out, b_out, c_out, e_out;
d_ff a (
a_out,
~e_out,
clk,
reset
);
d_ff b (
b_out,
a_out,
clk,
reset
);
d_ff c (
c_out,
b_out,
clk,
reset
);
d_ff e (
e_out,
c_out,
clk,
reset
);
assign out[7] = ~a_out & ~e_out;
assign out[6] = a_out & ~b_out;
assign out[5] = b_out & ~c_out;
assign out[4] = c_out & ~e_out;
assign out[3] = a_out & e_out;
assign out[2] = ~a_out & b_out;
assign out[1] = ~b_out & c_out;
assign out[0] = ~c_out & e_out;
endmodule
| 7.281847
|
module d_ff (
q,
d,
clk,
rst
);
output q;
input d, clk, rst;
reg q;
always @(posedge clk, negedge rst) begin
if (!rst) q <= 1'b0;
else q <= d;
end
endmodule
| 7.310086
|
module mux_2x1 (
y,
x,
sel
);
output y;
input [1:0] x;
input sel;
reg y;
always @(x, sel) begin
if (sel) y = x[1];
else y = x[0];
end
endmodule
| 6.925133
|
module DFF (
output reg Q,
input D,
Clock,
reset_b
);
always @(posedge Clock, negedge reset_b)
if (reset_b == 0) Q <= 0;
else Q <= D;
endmodule
| 7.63121
|
module DFF_gated (
output Q,
input D,
Shift_control,
Clock,
reset_b
);
DFF M_DFF (
Q,
D_internal,
Clock,
reset_b
);
Mux_2 M_Mux (
D_internal,
Q,
D,
Shift_control
);
endmodule
| 7.15698
|
module FA (
output reg carry,
sum,
input a,
b,
C_in
);
always @(a, b, C_in) {carry, sum} = a + b + C_in;
endmodule
| 7.885402
|
module Shift_Reg_gated_clock (
output SO,
input S_in,
input [7:0] data,
input load,
Shift_control,
Clock,
reset_b
);
reg [7:0] SReg;
assign SO = SReg[0];
always @(posedge Clock, negedge reset_b)
if (reset_b == 0) SReg <= 0;
else if (load) SReg <= data;
else if (Shift_control) SReg <= {S_in, SReg[7:1]};
endmodule
| 7.132902
|
module ex_6_46 (
out,
clk,
reset
);
output [5:0] out;
input clk, reset;
reg [5:0] out;
always @(posedge clk, negedge reset) begin
if (!reset) out <= 6'b100000;
else out <= {out[0], out[5:1]};
end
endmodule
| 6.543041
|
module ex_6_47 (
p_out,
d_in,
clk,
reset
);
output p_out;
input d_in, clk, reset;
reg p_out;
always @(posedge clk, negedge reset) begin
if (!reset) p_out <= 1'b0;
else p_out <= p_out ^ d_in;
end
endmodule
| 6.539932
|
module Shift_Register_4_beh (
A_par,
I_par,
s1,
s0,
MSB_in,
LSB_in,
clk,
clear_b
);
output [3:0] A_par;
input [3:0] I_par;
input s1, s0, MSB_in, LSB_in, clk, clear_b;
reg [3:0] A_par;
always @(posedge clk, negedge clear_b) begin
if (!clear_b) A_par <= 4'b0000;
else begin
case ({
s1, s0
})
2'b00: A_par <= A_par; // No Change
2'b01: A_par <= {MSB_in, A_par[3:1]}; // Shift right
2'b10: A_par <= {A_par[2:0], LSB_in}; // Shift left
2'b11: A_par <= I_par; //Parallel load
endcase
end
end
endmodule
| 6.958616
|
module ex_6_50_a (
out,
clk,
reset
);
output [2:0] out;
input clk, reset;
reg [2:0] out;
always @(posedge clk, negedge reset) begin
if (!reset) out <= 3'b000;
else begin
case (out)
3'b000: out <= 3'b100;
3'b001: out <= 3'b110;
3'b010: out <= 3'b001;
3'b100: out <= 3'b010;
3'b110: out <= 3'b000;
default: out <= 3'b000;
endcase
end
end
endmodule
| 7.253389
|
module ex_6_50_b (
out,
clk,
reset
);
output [2:0] out;
input clk, reset;
reg [2:0] out;
always @(posedge clk, negedge reset) begin
if (!reset) out <= 3'b000;
else begin
case (out)
3'b000: out <= 3'b001;
3'b001: out <= 3'b010;
3'b010: out <= 3'b100;
3'b100: out <= 3'b110;
3'b110: out <= 3'b000;
default: out <= 3'b000;
endcase
end
end
endmodule
| 7.258663
|
module d_ff (
q,
d,
clk,
rst
);
output q;
input d, clk, rst;
reg q;
always @(posedge clk, negedge rst) begin
if (!rst) q <= 1'b0;
else q <= d;
end
endmodule
| 7.310086
|
module mux_4x1 (
y,
x,
sel
);
output y;
input [3:0] x;
input [1:0] sel;
reg y;
always @(x, sel) begin
case (sel)
2'b00: y = x[0];
2'b01: y = x[1];
2'b10: y = x[2];
2'b11: y = x[3];
endcase
end
endmodule
| 8.288733
|
module d_ff (
q,
d,
clk,
rst
);
output q;
input d, clk, rst;
reg q;
always @(posedge clk, negedge rst) begin
if (!rst) q <= 1'b0;
else q <= d;
end
endmodule
| 7.310086
|
module mux_2x1 (
y,
x,
sel
);
output y;
input [1:0] x;
input sel;
reg y;
always @(x, sel) begin
if (sel) y = x[1];
else y = x[0];
end
endmodule
| 6.925133
|
module d_ff (
q,
d,
clk,
rst
);
output q;
input d, clk, rst;
reg q;
always @(posedge clk, negedge rst) begin
if (!rst) q <= 1'b0;
else q <= d;
end
endmodule
| 7.310086
|
module mux_2x1 (
y,
x,
sel
);
output y;
input [1:0] x;
input sel;
reg y;
always @(x, sel) begin
if (sel) y = x[1];
else y = x[0];
end
endmodule
| 6.925133
|
module t_ff (
q,
q_not,
t,
clk,
reset
);
output q, q_not;
input t, clk, reset;
reg q;
assign q_not = ~q;
always @(posedge clk, negedge reset) begin
if (!reset) q <= 1'b0;
else if (t) q <= ~q;
end
endmodule
| 6.889794
|
module d_ff (
q,
d,
clk,
rst
);
output q;
input d, clk, rst;
reg q;
always @(posedge clk, negedge rst) begin
if (!rst) q <= 1'b0;
else q <= d;
end
endmodule
| 7.310086
|
module ex_6_59_b (
out,
clk,
reset
);
output [7:0] out;
input clk, reset;
reg [7:0] out;
always @(posedge clk, negedge reset) begin
if (!reset) out <= 8'b1000_0000;
else out <= {out[0], out[7:1]};
end
endmodule
| 6.964154
|
module top_module (
input [99:0] a,
b,
input cin,
output cout,
output [99:0] sum
);
assign {cout, sum} = a + b + cin;
endmodule
| 7.203305
|
module ripple_adder (
input [5:0] X,
input [5:0] Y,
output [5:0] S,
output C_out
);
wire w1, w2, w3, w4, w5;
fulladder u1 (
X[0],
Y[0],
1'b0,
S[0],
w1
);
fulladder u2 (
X[1],
Y[1],
w1,
S[1],
w2
);
fulladder u3 (
X[2],
Y[2],
w2,
S[2],
w3
);
fulladder u4 (
X[3],
Y[3],
w3,
S[3],
w4
);
fulladder u5 (
X[4],
Y[4],
w4,
S[4],
w5
);
fulladder u6 (
X[5],
Y[5],
w5,
S[5],
C_out
);
endmodule
| 9.165067
|
module top_module (
input clk,
input reset,
output OneHertz,
output [2:0] c_enable
); //
reg [3:0] q0, q1, q2;
bcdcount counter0 (
clk,
reset,
c_enable[0],
q0
);
bcdcount counter1 (
clk,
reset,
c_enable[1],
q1
);
bcdcount counter2 (
clk,
reset,
c_enable[2],
q2
);
assign c_enable = {q1 == 4'b1001 && q0 == 4'b1001, q0 == 4'b1001, 1'b1};
assign OneHertz = (q2 == 4'b1001) && (q1 == 4'b1001) && (q0 == 4'b1001);
endmodule
| 7.203305
|
module top_module (
input clk,
input resetn,
input [1:0] byteena,
input [15:0] d,
output [15:0] q
);
always @(posedge clk) begin
q <= {16{resetn}} & {byteena[1] ? d[15:8] : q[15:8], byteena[0] ? d[7:0] : q[7:0]};
end
endmodule
| 7.203305
|
module top_module (
input in,
input [3:0] state,
output [3:0] next_state,
output out
); //
parameter A = 0, B = 1, C = 2, D = 3;
// State transition logic: Derive an equation for each state flip-flop.
assign next_state[A] = state[A] & (~in) | state[C] & (~in);
assign next_state[B] = state[A] & (in) | state[B] & (in) | state[D] & (in);
assign next_state[C] = state[B] & (~in) | state[D] & (~in);
assign next_state[D] = state[C] & (in);
// Output logic:
assign out = state[D];
endmodule
| 7.203305
|
module top_module (
input [4:1] x,
output f
);
assign f = ~x[1] & x[3] | x[1] & x[2] & ~x[3];
endmodule
| 7.203305
|
module top_module (
input clk,
input reset, // Active-high synchronous reset to 32'h1
output [31:0] q
);
reg [31:0] q_next;
always @(*) begin
q_next = q >> 1;
q_next[31] = 0 ^ q[0];
q_next[21] = q[22] ^ q[0];
q_next[1] = q[2] ^ q[0];
q_next[0] = q[1] ^ q[0];
end
always @(posedge clk) begin
if (reset) q <= 32'h1;
else q <= q_next;
end
endmodule
| 7.203305
|
module top_module (
input a,
b,
output out_and,
output out_or,
output out_xor,
output out_nand,
output out_nor,
output out_xnor,
output out_anotb
);
assign out_and = a & b;
assign out_or = a | b;
assign out_xor = a ^ b;
assign out_nand = ~out_and;
assign out_nor = ~out_or;
assign out_xnor = ~out_xor;
assign out_anotb = a & ~b;
endmodule
| 7.203305
|
module top_module (
input clk,
input areset, // Asynchronous reset to state B
input in,
output reg out
);
always @(posedge clk) begin
if (areset) out = 1;
else if (out == 1) begin
if (in) out = out;
else out = 0;
end else begin
if (in) out = out;
else out = 1;
end
end
endmodule
| 7.203305
|
module top_module (
input [99:0] in,
output [98:0] out_both,
output [99:1] out_any,
output [99:0] out_different
);
assign out_both = in[98:0] & in[99:1];
assign out_any = in[98:0] | in[99:1];
assign out_different = {(in[99] ^ in[0]), in[98:0] ^ in[99:1]};
endmodule
| 7.203305
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], ue[2], ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= (~Aop);
B <= Bop;
if ((!halt)) begin
IP <= ((IP + length) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], ue[2], ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= '0;
B <= Bop;
if ((!halt)) begin
IP <= ((IP + length) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], ue[2], ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= '1;
B <= Bop;
if ((!halt)) begin
IP <= ((IP + length) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module top_module (
input a,
b,
sel,
output out
);
always @(*) begin
case (sel)
0: out = a;
1: out = b;
endcase
end
endmodule
| 7.203305
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], ue[2], ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= Aop;
B <= (~Bop);
if ((!halt)) begin
IP <= ((IP + length) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], ue[2], ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= Aop;
B <= '0;
if ((!halt)) begin
IP <= ((IP + length) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], ue[2], ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= Aop;
B <= '1;
if ((!halt)) begin
IP <= ((IP + length) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module top_module (
input [99:0] a,
b,
input sel,
output [99:0] out
);
assign out = (sel == 1) ? b : a;
endmodule
| 7.203305
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], ue[2], ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= Aop;
B <= Bop;
if ((!(!halt))) begin
IP <= ((IP + length) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], ue[2], ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= Aop;
B <= Bop;
if ((!'0)) begin
IP <= ((IP + length) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], ue[2], ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= Aop;
B <= Bop;
if ((!'1)) begin
IP <= ((IP + length) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], ue[2], ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= Aop;
B <= Bop;
if ((~|halt)) begin
IP <= ((IP + length) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], ue[2], ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= Aop;
B <= Bop;
if ((~^halt)) begin
IP <= ((IP + length) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], ue[2], ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= Aop;
B <= Bop;
if ((^halt)) begin
IP <= ((IP + length) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], ue[2], ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= Aop;
B <= Bop;
if ((&halt)) begin
IP <= ((IP + length) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], ue[2], ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= Aop;
B <= Bop;
if ((|halt)) begin
IP <= ((IP + length) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module top_module (
input [15:0] a,
b,
c,
d,
e,
f,
g,
h,
i,
input [ 3:0] sel,
output [15:0] out
);
always @(*) begin
case (sel)
0: out = a;
1: out = b;
2: out = c;
3: out = d;
4: out = e;
5: out = f;
6: out = g;
7: out = h;
8: out = i;
default: out = ~(0);
endcase
end
endmodule
| 7.203305
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], ue[2], ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= Aop;
B <= Bop;
if ((!halt)) begin
IP <= (((-IP) + length) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], ue[2], ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= Aop;
B <= Bop;
if ((!halt)) begin
IP <= (('0 + length) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], ue[2], ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= Aop;
B <= Bop;
if ((!halt)) begin
IP <= (('1 + length) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], ue[2], ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= Aop;
B <= Bop;
if ((!halt)) begin
IP <= ((IP + (-length)) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], ue[2], ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= Aop;
B <= Bop;
if ((!halt)) begin
IP <= ((IP + '0) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], ue[2], ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= Aop;
B <= Bop;
if ((!halt)) begin
IP <= ((IP + '1) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], ue[2], ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= Aop;
B <= Bop;
if ((!halt)) begin
IP <= ((IP - length) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], ue[2], ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= Aop;
B <= Bop;
if ((!halt)) begin
IP <= ((IP * length) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], ue[2], ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= Aop;
B <= Bop;
if ((!halt)) begin
IP <= ((IP / length) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module y86_seq (
input clk,
input rst,
output [31:0] bus_A,
input [31:0] bus_in,
output [31:0] bus_out,
output bus_WE,
bus_RE,
output [7:0] current_opcode
);
reg [5:1] full;
wire [4:0] ue = {full[4:1], full[5]};
always @(posedge clk) begin
if (rst) full <= 'b010000;
else full <= {ue[4], ue[3], ue[2], ue[1], ue[0]};
end
reg [31:0] IR;
always @(posedge clk) if (ue[0]) IR <= bus_in;
reg [31:0] IP, A, B;
wire [31:0] Aop, Bop;
wire [7:0] opcode = IR[7:0];
wire [1:0] mod = IR[15:14];
reg ZF;
wire load = ((opcode == 'b010001011) && (mod == 1));
wire move = ((opcode == 'b010001001) && (mod == 3));
wire store = ((opcode == 'b010001001) && (mod == 1));
wire memory = (load || store);
wire add = (opcode == 'b01);
wire sub = (opcode == 'b0101001);
wire halt = (opcode == 'b011110100);
wire aluop = (add || sub);
wire jnez = (opcode == 'b01110101);
wire [4:0] RD = IR[10:8];
wire [4:0] RS = IR[13:11];
wire [4:0] Aad = (memory ? 6 : RD), Bad = RS;
wire [31:0] distance = {{24{IR[15]}}, IR[15:8]};
wire [31:0] displacement = {{24{IR[23]}}, IR[23:16]};
wire btaken = (jnez && (!ZF));
wire [1:0] length = (memory ? 3 : (((aluop || move) || jnez) ? 2 : 1));
always @(posedge clk)
if (rst) IP <= 0;
else if (ue[1]) begin
A <= Aop;
B <= Bop;
if ((!halt)) begin
IP <= ((IP % length) + (btaken ? distance : 0));
end else begin
$finish;
end
end
reg [31:0] MAR, MDRw, C;
wire [31:0] ALU_op2 = (memory ? displacement : (sub ? (~B) : B));
wire [31:0] ALUout = ((A + ALU_op2) + sub);
always @(posedge clk)
if (rst) ZF = 0;
else if (ue[2]) begin
MAR <= ALUout;
C <= (move ? B : ALUout);
MDRw <= B;
if (aluop) ZF <= (ALUout == 0);
end
reg [31:0] MDRr;
always @(posedge clk) if ((ue[3] && load)) MDRr <= bus_in;
assign bus_A = (ue[3] ? MAR : (ue[0] ? IP : 0));
assign bus_RE = (ue[0] || (ue[3] && load));
reg [31:0] R[7:0];
assign Aop = R[Aad];
assign Bop = R[Bad];
assign bus_WE = (ue[3] && store);
assign bus_out = MDRw;
always @(posedge clk)
if (rst) begin
R[0] <= 0;
R[1] <= 0;
R[2] <= 0;
R[3] <= 0;
R[4] <= 0;
R[5] <= 0;
R[6] <= 0;
R[7] <= 0;
end else if (ue[4])
if (((aluop || move) || load))
if (load) R[RS] <= MDRr;
else R[RD] <= C;
assign current_opcode = opcode;
endmodule
| 6.868788
|
module top_module (
input [255:0] in,
input [7:0] sel,
output out
);
assign out = in[sel];
endmodule
| 7.203305
|
module Bit64Adder (
a,
b,
cin,
sum,
cout
);
input [64:1] a, b;
input cin;
output [64:1] sum;
output cout;
wire w1, w2, w3;
Bit16Adder B16A_0 (
a[16:1],
b[16:1],
cin,
sum[16:1],
w1
);
Bit16Adder B16A_1 (
a[32:17],
b[32:17],
w1,
sum[32:17],
w2
);
Bit16Adder B16A_2 (
a[48:33],
b[48:33],
w2,
sum[48:33],
w3
);
Bit16Adder B16A_3 (
a[64:49],
b[64:49],
w3,
sum[64:49],
cout
);
endmodule
| 6.759327
|
module FullAdd64_tb;
reg Cin;
reg [63:0] A, B;
wire [63:0] S;
wire Cout;
fullAdder64bit fa64b (
A,
B,
Cin,
S,
Cout
);
initial begin
assign Cin = 0;
assign A = 1;
assign B = 0;
#10 $display("A: %0d, B: %0d, Carry: %0d, Sum: %0d ,CarryOut: %0d", A, B, Cin, S, Cout);
assign Cin = 1;
assign A = 1;
assign B = 1;
#10 $display("A: %0d, B: %0d, Carry: %0d, Sum: %0d ,CarryOut: %0d", A, B, Cin, S, Cout);
assign Cin = 0;
assign A = 0;
assign B = 0;
#10 $display("A: %0d, B: %0d, Carry: %0d, Sum: %0d ,CarryOut: %0d", A, B, Cin, S, Cout);
assign Cin = 0;
assign A = 10000;
assign B = 20000;
#10 $display("A: %0d, B: %0d, Carry: %0d, Sum: %0d ,CarryOut: %0d", A, B, Cin, S, Cout);
end
endmodule
| 6.861808
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.