Spaces:
Runtime error
Runtime error
| Ticket Name: Linux/TDA2: TDA2xx/linux opencx on vision_sdk | |
| Query Text: | |
| Part Number: TDA2 Tool/software: Linux I cannot run the openclframecopy usecase successfully. I have done Following steps: 1. clone kernel, uboot, cmem,sgx driver and target file system; 2. run hlos/scripts/linux/setup-linux-build-env.sh and ./hlos/scripts/linux/setup_linux.sh; 3. set git config; 4. git Opencl supported package; 5. MAKECONFIG = tda2xx_evm_linux_opencx； 6. my system path is :PATH="/home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/ti_components/cg_tools/linux/ti-cgt-c6000_8.1.0/bin:/home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/ti_components/open_compute/opencl_rtos_am57xx_01_01_10_00/packages/ti/clocl:/home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/ti_components/os_tools/linux/targetfs/usr/share/ti/opencl/bin/x86:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games" 7. KERNEL_INSTALL_DIR="/home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/ti_components/os_tools/linux/kernel" 8. cd /vision_sdk/build run "rm -rf ../binaries/"; 9. make clean ; make liunx_clean; make -s -j dpend ; make -s -j opencx; 10. use uenv_sd.txt as uenv.txt; There is no error in the above steps . But it cannot run success on the target. Below is my running log: 7457.log13.txt at arch/arm/cpu/armv7/omap-common/utils.c:195/mmc_get_part_size() | |
| Warning: fastboot.userdata_size: unable to calc | |
| SCSI: SATA link 0 timeout. | |
| AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode | |
| flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst | |
| scanning bus for devices... | |
| Found 0 device(s). | |
| Net: | |
| Warning: ethernet@48484000 using MAC address from ROM | |
| eth0: ethernet@48484000 | |
| Hit any key to stop autoboot: 0 | |
| => pri | |
| arch=arm | |
| args_fit=setenv bootargs console=${console} | |
| args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype} | |
| baudrate=115200 | |
| board=dra7xx | |
| board_name=dra7xx | |
| board_rev=H.0 | |
| boot_fdt=try | |
| boot_fit=0 | |
| boot_os=0 | |
| bootargs=androidboot.serialno=${serial#} console=ttyS0,115200 androidboot.console=ttyS0 androidboot.hardware=jacinto6evmboard | |
| bootcmd=if test ${dofastboot} -eq 1; then echo Boot fastboot requested, resetting dofastboot ...;setenv dofastboot 0; saveenv;echo Booting into fastboot ...; fastboot 0; fi;if test ${boot_fit} -eq 1; then run update_to_fit;fi;run findfdt; run envboot; run mmcboot;run emmc_android_boot; | |
| bootdelay=2 | |
| bootdir=/boot | |
| bootenvfile=uEnv.txt | |
| bootfile=zImage | |
| bootm_size=0x10000000 | |
| bootpart=0:2 | |
| bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr} | |
| console=ttyO0,115200n8 | |
| cpu=armv7 | |
| dfu_alt_info_emmc=rawemmc raw 0 3751936;boot part 1 1;rootfs part 1 2;MLO fat 1 1;MLO.raw raw 0x100 0x100;u-boot.img.raw raw 0x300 0x1000;u-env.raw raw 0x1300 0x200;spl-os-args.raw raw 0x1500 0x200;spl-os-image.raw raw 0x1700 0x6900;spl-os-args fat 1 1;spl-os-image fat 1 1;u-boot.img fat 1 1;uEnv.txt fat 1 1 | |
| dfu_alt_info_mmc=boot part 0 1;rootfs part 0 2;MLO fat 0 1;MLO.raw raw 0x100 0x100;u-boot.img.raw raw 0x300 0x1000;u-env.raw raw 0x1300 0x200;spl-os-args.raw raw 0x1500 0x200;spl-os-image.raw raw 0x1700 0x6900;spl-os-args fat 0 1;spl-os-image fat 0 1;u-boot.img fat 0 1;uEnv.txt fat 0 1 | |
| dfu_alt_info_qspi=MLO raw 0x0 0x040000;u-boot.img raw 0x040000 0x0100000;u-boot-spl-os raw 0x140000 0x080000;u-boot-env raw 0x1C0000 0x010000;u-boot-env.backup raw 0x1D0000 0x010000;kernel raw 0x1E0000 0x800000 | |
| dfu_alt_info_ram=kernel ram 0x80200000 0x4000000;fdt ram 0x80f80000 0x80000;ramdisk ram 0x81000000 0x4000000 | |
| dfu_bufsiz=0x10000 | |
| dofastboot=0 | |
| emmc_android_boot=setenv eval_bootargs setenv bootargs $bootargs; run eval_bootargs; setenv mmcdev 1; setenv fdt_part 3; setenv boot_part 9; if test $reboot_image = recovery; then setenv boot_part 8; setenv reboot_image boot; saveenv; fi;setenv machid fe6; mmc dev $mmcdev; mmc rescan; part start mmc ${mmcdev} ${fdt_part} fdt_start; part size mmc ${mmcdev} ${fdt_part} fdt_size; part start mmc ${mmcdev} ${boot_part} boot_start; part size mmc ${mmcdev} ${boot_part} boot_size; mmc read ${fdtaddr} ${fdt_start} ${fdt_size}; mmc read ${loadaddr} ${boot_start} ${boot_size}; echo Booting from eMMC ...; bootm $loadaddr $loadaddr $fdtaddr; | |
| envboot=mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device ${mmcdev};if run loadbootscript; then run bootscript;else if run loadbootenv; then echo Loaded env from ${bootenvfile};run importbootenv;fi;if test -n $uenvcmd; then echo Running uenvcmd ...;run uenvcmd;fi;fi;fi; | |
| ethaddr=7c:38:66:a1:e2:a6 | |
| fastboot.board_rev=H.0 | |
| fastboot.cpu=J6 | |
| fastboot.secure=GP | |
| fastboot.userdata_size=unknown | |
| fdt_addr_r=0x88000000 | |
| fdtaddr=0x88000000 | |
| fdtcontroladdr=fdf0a598 | |
| fdtfile=undefined | |
| findfdt=if test $board_name = omap5_uevm; then setenv fdtfile omap5-uevm.dtb; fi; if test $board_name = dra7xx; then setenv fdtfile dra7-evm.dtb; fi;if test $board_name = dra72x-revc; then setenv fdtfile dra72-evm-revc.dtb; fi;if test $board_name = dra72x; then setenv fdtfile dra72-evm.dtb; fi;if test $board_name = dra71x; then setenv fdtfile dra71-evm.dtb; fi;if test $board_name = dra76x; then setenv fdtfile dra76-evm.dtb; fi;if test $board_name = beagle_x15; then setenv fdtfile am57xx-beagle-x15.dtb; fi;if test $board_name = beagle_x15_revb1; then setenv fdtfile am57xx-beagle-x15-revb1.dtb; fi;if test $board_name = am57xx_evm; then setenv fdtfile am57xx-evm.dtb; fi;if test $board_name = am57xx_evm_reva3; then setenv fdtfile am57xx-evm-reva3.dtb; fi;if test $board_name = am572x_idk && test $idk_lcd = no; then setenv fdtfile am572x-idk.dtb; fi;if test $board_name = am572x_idk && test $idk_lcd = osd101t2045; then setenv fdtfile am572x-idk-lcd-osd.dtb; fi;if test $board_name = am572x_idk && test $idk_lcd = osd101t2587; then setenv fdtfile am572x-idk-lcd-osd101t2587.dtb; fi;if test $board_name = am571x_idk && test $idk_lcd = no; then setenv fdtfile am571x-idk.dtb; fi;if test $board_name = am571x_idk && test $idk_lcd = osd101t2045; then setenv fdtfile am571x-idk-lcd-osd.dtb; fi;if test $board_name = am571x_idk && test $idk_lcd = osd101t2587; then setenv fdtfile am571x-idk-lcd-osd101t2587.dtb; fi;if test $fdtfile = undefined; then echo WARNING: Could not determine device tree to use; fi; | |
| finduuid=part uuid mmc ${bootpart} uuid | |
| fit_bootfile=fitImage.itb | |
| fit_loadaddr=0x88000000 | |
| importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize} | |
| kernel_addr_r=0x82000000 | |
| loadaddr=0x82000000 | |
| loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile} | |
| loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr | |
| loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile} | |
| loadfit=run args_fit; bootm ${loadaddr}#${fdtfile}; | |
| loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile} | |
| mmcboot=if mmc dev ${mmcdev}; then setenv devtype mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev};if run loadimage; then run loadfdt; echo Booting from mmc${mmcdev} ...; run args_mmc; bootz ${loadaddr} - ${fdtaddr}; fi; fi; fi; | |
| mmcdev=0 | |
| mmcloados=run args_mmc; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run loadfdt; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi; | |
| mmcrootfstype=ext4 rootwait | |
| netargs=setenv bootargs console=${console} ${optargs} root=/dev/nfs nfsroot=${serverip}:${rootpath},${nfsopts} rw ip=dhcp | |
| netboot=echo Booting from network ...; setenv autoload no; dhcp; run netloadimage; run netloadfdt; run netargs; bootz ${loadaddr} - ${fdtaddr} | |
| netloadfdt=tftp ${fdtaddr} ${fdtfile} | |
| netloadimage=tftp ${loadaddr} ${bootfile} | |
| nfsopts=nolock | |
| partitions=uuid_disk=${uuid_gpt_disk};name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs} | |
| partitions_android=uuid_disk=${uuid_gpt_disk};name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};name=bootloader,size=2304K,uuid=${uuid_gpt_bootloader};name=environment,size=256K,uuid=${uuid_gpt_environment};name=misc,size=128K,uuid=${uuid_gpt_misc};name=reserved,size=384K,uuid=${uuid_gpt_reserved};name=efs,size=16M,uuid=${uuid_gpt_efs};name=crypto,size=16K,uuid=${uuid_gpt_crypto};name=recovery,size=10M,uuid=${uuid_gpt_recovery};name=boot,size=10M,uuid=${uuid_gpt_boot};name=system,size=768M,uuid=${uuid_gpt_system};name=vendor,size=256M,uuid=${uuid_gpt_vendor};name=cache,size=256M,uuid=${uuid_gpt_cache};name=ipu1,size=8M,uuid=${uuid_gpt_ipu1};name=ipu2,size=8M,uuid=${uuid_gpt_ipu2};name=dsp1,size=8M,uuid=${uuid_gpt_dsp1};name=dsp2,size=8M,uuid=${uuid_gpt_dsp2};name=userdata,size=-,uuid=${uuid_gpt_userdata} | |
| pxefile_addr_r=0x80100000 | |
| ramdisk_addr_r=0x88080000 | |
| rdaddr=0x88080000 | |
| reboot_image=boot | |
| rootpath=/export/rootfs | |
| scriptaddr=0x80000000 | |
| scsidevs=0 | |
| serial#=0b0140144bb600a2 | |
| soc=omap5 | |
| static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off | |
| stderr=serial@4806a000 | |
| stdin=serial@4806a000 | |
| stdout=serial@4806a000 | |
| update_to_fit=setenv loadaddr ${fit_loadaddr}; setenv bootfile ${fit_bootfile} | |
| usbtty=cdc_acm | |
| vendor=ti | |
| ver=U-Boot 2016.05-00008-g1fbee98 (Jun 07 2018 - 20:31:19 +0800) | |
| vram=16M | |
| Environment size: 7470/131067 bytes | |
| => env default -fa | |
| ## Resetting to default environment | |
| => saveenv | |
| Saving Environment to MMC... | |
| Writing to redundant MMC(1)... done | |
| => reboot | |
| Unknown command 'reboot' - try 'help' | |
| => boot | |
| switch to partitions #0, OK | |
| mmc0 is current device | |
| SD/MMC found on device 0 | |
| reading boot.scr | |
| ** Unable to read file boot.scr ** | |
| reading uEnv.txt | |
| 165 bytes read in 2 ms (80.1 KiB/s) | |
| Loaded env from uEnv.txt | |
| Importing environment from mmc0 ... | |
| switch to partitions #0, OK | |
| mmc0 is current device | |
| SD/MMC found on device 0 | |
| 3552160 bytes read in 110 ms (30.8 MiB/s) | |
| 106665 bytes read in 15 ms (6.8 MiB/s) | |
| Booting from mmc0 ... | |
| Kernel image @ 0x82000000 [ 0x000000 - 0x3633a0 ] | |
| ## Flattened Device Tree blob at 88000000 | |
| Booting using the fdt blob at 0x88000000 | |
| Loading Device Tree to 8ffe2000, end 8ffff0a8 ... OK | |
| Starting kernel ... | |
| [ 0.000000] Booting Linux on physical CPU 0x0 | |
| [ 0.000000] Initializing cgroup subsys cpuset | |
| [ 0.000000] Initializing cgroup subsys cpu | |
| [ 0.000000] Initializing cgroup subsys cpuacct | |
| [ 0.000000] Linux version 4.4.84-00018-gd326d64 (hancan@hancan-virtual-machine) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #1 SMP PREEMPT Thu Jun 7 20:42:56 CST 2018 | |
| [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d | |
| [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache | |
| [ 0.000000] Machine model: TI DRA742 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000040300000, size 3 MiB | |
| [ 0.000000] Reserved memory: initialized node cmem@40300000, compatible id shared-dma-pool | |
| [ 0.000000] Reserved memory: regions without no-map are not yet supported | |
| [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 80 MiB | |
| [ 0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool | |
| [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009e000000, size 32 MiB | |
| [ 0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool | |
| [ 0.000000] Reserved memory: regions without no-map are not yet supported | |
| [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a1000000, size 32 MiB | |
| [ 0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool | |
| [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a3000000, size 32 MiB | |
| [ 0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool | |
| [ 0.000000] Reserved memory: regions without no-map are not yet supported | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a9000000, size 64 MiB | |
| [ 0.000000] Reserved memory: initialized node cmem@A9000000, compatible id shared-dma-pool | |
| [ 0.000000] cma: Reserved 24 MiB at 0x00000000be400000 | |
| [ 0.000000] Forcing write-allocate cache policy for SMP | |
| [ 0.000000] Memory policy: Data cache writealloc | |
| [ 0.000000] OMAP4: Map 0x00000000bfd00000 to fe600000 for dram barrier | |
| [ 0.000000] DRA752 ES2.0 | |
| [ 0.000000] PERCPU: Embedded 11 pages/cpu @ef62b000 s14912 r8192 d21952 u45056 | |
| [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243264 | |
| [ 0.000000] Kernel command line: console=ttyO0,115200n8 vram=16M root=PARTUUID=2ca9f500-02 rw rootwait ip=none mem=1024M | |
| [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) | |
| [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
| [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| [ 0.000000] Memory: 410844K/979968K available (6619K kernel code, 319K rwdata, 2388K rodata, 340K init, 290K bss, 364324K reserved, 204800K cma-reserved, 234496K highmem) | |
| [ 0.000000] Virtual kernel memory layout: | |
| [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
| [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) | |
| [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) | |
| [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| [ 0.000000] .text : 0xc0008000 - 0xc08d402c (9009 kB) | |
| [ 0.000000] .init : 0xc08d5000 - 0xc092a000 ( 340 kB) | |
| [ 0.000000] .data : 0xc092a000 - 0xc0979d60 ( 320 kB) | |
| [ 0.000000] .bss : 0xc097b000 - 0xc09c3800 ( 290 kB) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
| [ 0.000000] Preemptible hierarchical RCU implementation. | |
| [ 0.000000] Build-time adjustment of leaf fanout to 32. | |
| [ 0.000000] NR_IRQS:16 nr_irqs:16 16 | |
| [ 0.000000] ti_dt_clocks_register: failed to lookup clock node gmac_gmii_ref_clk_div | |
| [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz | |
| [ 0.000000] Architected cp15 timer(s) running at 6.14MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns | |
| [ 0.000005] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns | |
| [ 0.000016] Switching to timer-based delay loop, resolution 162ns | |
| [ 0.000329] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns | |
| [ 0.000337] OMAP clocksource: 32k_counter at 32768 Hz | |
| [ 0.000772] Console: colour dummy device 80x30 | |
| [ 0.000787] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' | |
| [ 0.000794] This ensures that you still see kernel messages. Please | |
| [ 0.000799] update your kernel commandline. | |
| [ 0.000813] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) | |
| [ 0.000825] pid_max: default: 32768 minimum: 301 | |
| [ 0.000921] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| [ 0.000931] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| [ 0.001474] Initializing cgroup subsys io | |
| [ 0.001490] Initializing cgroup subsys memory | |
| [ 0.001514] Initializing cgroup subsys devices | |
| [ 0.001526] Initializing cgroup subsys freezer | |
| [ 0.001537] Initializing cgroup subsys perf_event | |
| [ 0.001548] Initializing cgroup subsys pids | |
| [ 0.001575] CPU: Testing write buffer coherency: ok | |
| [ 0.001777] /cpus/cpu@0 missing clock-frequency property | |
| [ 0.001792] /cpus/cpu@1 missing clock-frequency property | |
| [ 0.001802] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
| [ 0.001834] Setting up static identity map for 0x80008380 - 0x800083e0 | |
| [ 0.080058] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
| [ 0.080128] Brought up 2 CPUs | |
| [ 0.080141] SMP: Total of 2 processors activated (24.59 BogoMIPS). | |
| [ 0.080147] CPU: All CPU(s) started in HYP mode. | |
| [ 0.080152] CPU: Virtualization extensions available. | |
| [ 0.080531] devtmpfs: initialized | |
| [ 0.109242] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 | |
| [ 0.110221] omap_hwmod: l3_main_2 using broken dt data from ocp | |
| [ 0.313080] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
| [ 0.313100] futex hash table entries: 512 (order: 3, 32768 bytes) | |
| [ 0.317325] pinctrl core: initialized pinctrl subsystem | |
| [ 0.318175] NET: Registered protocol family 16 | |
| [ 0.319103] DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| [ 0.340217] cpuidle: using governor ladder | |
| [ 0.370245] cpuidle: using governor menu | |
| [ 0.378708] OMAP GPIO hardware version 0.1 | |
| [ 0.385082] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 ! | |
| [ 0.401068] omap-gpmc 50000000.gpmc: GPMC revision 6.0 | |
| [ 0.401081] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 | |
| [ 0.410323] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. | |
| [ 0.410334] hw-breakpoint: maximum watchpoint size is 8 bytes. | |
| [ 0.410795] omap4_sram_init:Unable to allocate sram needed to handle errata I688 | |
| [ 0.410805] omap4_sram_init:Unable to get sram pool needed to handle errata I688 | |
| [ 0.411376] OMAP DMA hardware revision 0.0 | |
| [ 0.451372] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) | |
| [ 0.452531] edma 43300000.edma: memcpy is disabled | |
| [ 0.457176] edma 43300000.edma: TI EDMA DMA engine driver | |
| [ 0.461567] omap-iommu 40d01000.mmu: 40d01000.mmu registered | |
| [ 0.461744] omap-iommu 40d02000.mmu: 40d02000.mmu registered | |
| [ 0.461910] omap-iommu 58882000.mmu: 58882000.mmu registered | |
| [ 0.462064] omap-iommu 55082000.mmu: 55082000.mmu registered | |
| [ 0.462353] omap-iommu 41501000.mmu: 41501000.mmu registered | |
| [ 0.462539] omap-iommu 41502000.mmu: 41502000.mmu registered | |
| [ 0.465540] palmas 0-0058: IRQ missing: skipping irq request | |
| [ 0.480976] palmas 0-0058: Muxing GPIO 2e, PWM 0, LED 0 | |
| [ 0.553288] pcf857x 0-0020: probed | |
| [ 0.553850] pcf857x 0-0021: probed | |
| [ 0.554000] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz | |
| [ 0.554391] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz | |
| [ 0.554596] media: Linux media interface: v0.10 | |
| [ 0.554647] Linux video capture interface: v2.00 | |
| [ 0.554690] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.554697] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
| [ 0.554721] PTP clock support registered | |
| [ 0.554766] EDAC MC: Ver: 3.0.0 | |
| [ 0.555511] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 | |
| [ 0.555809] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 | |
| [ 0.556139] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 0.556976] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.567594] NET: Registered protocol family 2 | |
| [ 0.568088] TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
| [ 0.568151] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
| [ 0.568276] TCP: Hash tables configured (established 8192 bind 8192) | |
| [ 0.568322] UDP hash table entries: 512 (order: 2, 16384 bytes) | |
| [ 0.568353] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
| [ 0.568562] NET: Registered protocol family 1 | |
| [ 0.568831] RPC: Registered named UNIX socket transport module. | |
| [ 0.568840] RPC: Registered udp transport module. | |
| [ 0.568847] RPC: Registered tcp transport module. | |
| [ 0.568853] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.569851] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available | |
| [ 0.579807] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 0.580457] NFS: Registering the id_resolver key type | |
| [ 0.580484] Key type id_resolver registered | |
| [ 0.580492] Key type id_legacy registered | |
| [ 0.580545] ntfs: driver 2.1.32 [Flags: R/O]. | |
| [ 0.581805] bounce: pool size: 64 pages | |
| [ 0.581952] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) | |
| [ 0.581965] io scheduler noop registered | |
| [ 0.581977] io scheduler deadline registered | |
| [ 0.582010] io scheduler cfq registered (default) | |
| [ 0.586905] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 | |
| [ 0.590173] PCI host bridge /ocp/axi@0/pcie_rc@51000000 ranges: | |
| [ 0.590186] No bus range found for /ocp/axi@0/pcie_rc@51000000, using [bus 00-ff] | |
| [ 0.590219] IO 0x20003000..0x20012fff -> 0x00000000 | |
| [ 0.590241] MEM 0x20013000..0x2fffffff -> 0x20013000 | |
| [ 0.620429] dra7-pcie 51000000.pcie_rc: link is not up | |
| [ 0.620605] dra7-pcie 51000000.pcie_rc: PCI host bridge to bus 0000:00 | |
| [ 0.620618] pci_bus 0000:00: root bus resource [bus 00-ff] | |
| [ 0.620628] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] | |
| [ 0.620638] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] | |
| [ 0.621042] PCI: bus0: Fast back to back transfers disabled | |
| [ 0.621160] PCI: bus1: Fast back to back transfers enabled | |
| [ 0.621242] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] | |
| [ 0.621257] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] | |
| [ 0.621270] pci 0000:00:00.0: PCI bridge to [bus 01] | |
| [ 0.621489] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt | |
| [ 0.681968] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled | |
| [ 0.685355] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 301, base_baud = 3000000) is a 8250 | |
| [ 1.695337] console [ttyS0] enabled | |
| [ 1.699736] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 302, base_baud = 3000000) is a 8250 | |
| [ 1.709441] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 303, base_baud = 3000000) is a 8250 | |
| [ 1.719491] [drm] Initialized drm 1.1.0 20060810 | |
| [ 1.725499] OMAP DSS rev 6.1 | |
| [ 1.729295] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) | |
| [ 1.745084] loop: module loaded | |
| [ 1.748626] vmemexp device MAJOR num = 246 | |
| [ 1.752755] vmemexp class registered | |
| [ 1.756467] /dev/vmemexp device registered | |
| [ 1.760602] ioctl DBUFIOC_EXPORT_VIRTMEM = -1072899120 | |
| [ 1.766274] nand: No NAND device found | |
| [ 1.770064] omap2-nand 8000000.nand: scan failed, may be bus-width mismatch | |
| [ 1.780008] m25p80 spi32766.0: s25fl256s1 (32768 Kbytes) | |
| [ 1.785405] 7 ofpart partitions found on MTD device spi32766.0 | |
| [ 1.791288] Creating 7 MTD partitions on "spi32766.0": | |
| [ 1.796451] 0x000000000000-0x000000040000 : "QSPI.SPL" | |
| [ 1.802569] 0x000000040000-0x000000140000 : "QSPI.u-boot" | |
| [ 1.808925] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" | |
| [ 1.815850] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" | |
| [ 1.822557] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" | |
| [ 1.829958] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" | |
| [ 1.836301] 0x0000009e0000-0x000002000000 : "QSPI.file-system" | |
| [ 1.844100] libphy: Fixed MDIO Bus: probed | |
| [ 1.897007] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 | |
| [ 1.903132] davinci_mdio 48485000.mdio: detected phy mask fffffff3 | |
| [ 1.913632] libphy: 48485000.mdio: probed | |
| [ 1.917704] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver unknown | |
| [ 1.925746] davinci_mdio 48485000.mdio: phy[3]: device 48485000.mdio:03, driver unknown | |
| [ 1.934473] cpsw 48484000.ethernet: Detected MACID = 7c:38:66:a1:e2:a6 | |
| [ 1.941169] cpsw 48484000.ethernet: cpts: overflow check period 800 | |
| [ 1.948182] cpsw 48484000.ethernet: cpsw: Detected MACID = 7c:38:66:a1:e2:a7 | |
| [ 1.956804] mousedev: PS/2 mouse device common for all mice | |
| [ 1.963036] i2c /dev entries driver | |
| [ 1.971772] omap_hsmmc 4809c000.mmc: Got CD GPIO | |
| [ 1.977389] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode | |
| [ 1.983773] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode | |
| [ 1.990332] evm_3v3_sw: supplied by sysen1 | |
| [ 2.070762] mmc0: MAN_BKOPS_EN bit is not set | |
| [ 2.107563] mmc0: new HS200 MMC card at address 0001 | |
| [ 2.123001] mmcblk0: mmc0:0001 MMC08G 7.25 GiB | |
| [ 2.138059] mmcblk0boot0: mmc0:0001 MMC08G partition 1 8.00 MiB | |
| [ 2.144243] mmcblk0boot1: mmc0:0001 MMC08G partition 2 8.00 MiB | |
| [ 2.151978] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 2.160720] aic_dvdd: supplied by evm_3v3_sw | |
| [ 2.166623] davinci-mcasp 4847c000.mcasp: invalid tdm slots: 0 | |
| [ 2.174329] NET: Registered protocol family 10 | |
| [ 2.179735] sit: IPv6 over IPv4 tunneling driver | |
| [ 2.184944] NET: Registered protocol family 17 | |
| [ 2.189669] Key type dns_resolver registered | |
| [ 2.194071] omap_voltage_late_init: Voltage driver support not added | |
| [ 2.200999] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm | |
| [ 2.207230] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm | |
| [ 2.213938] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm | |
| [ 2.220191] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm | |
| [ 2.228443] Power Management for TI OMAP4+ devices. | |
| [ 2.233519] Registering SWP/SWPB emulation handler | |
| [ 2.240461] dmm 4e000000.dmm: initialized all PAT entries | |
| [ 2.247819] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). | |
| [ 2.254460] [drm] No driver support for vblank timestamp query. | |
| [ 2.260815] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0 | |
| [ 2.267669] omap_hsmmc 4809c000.mmc: Got CD GPIO | |
| [ 2.308218] asoc-simple-card sound0: tlv320aic3x-hifi <-> 48468000.mcasp mapping ok | |
| [ 2.327906] input: gpio_keys as /devices/platform/gpio_keys/input/input0 | |
| [ 2.334795] hctosys: unable to open rtc device (rtc0) | |
| [ 2.348137] evm_1v8: disabling | |
| [ 2.351220] aic_dvdd: disabling | |
| [ 2.354379] vmmcwl_fixed: disabling | |
| [ 2.358073] ldousb: disabling | |
| [ 2.361473] ALSA device list: | |
| [ 2.364452] #0: DRA7xx-EVM | |
| [ 2.367999] Waiting for root device PARTUUID=2ca9f500-02... | |
| [ 2.566831] mmc2: host does not support reading read-only switch, assuming write-enable | |
| [ 2.581884] mmc2: new ultra high speed DDR50 SDHC card at address aaaa | |
| [ 2.598785] mmcblk1: mmc2:aaaa SS08G 7.40 GiB | |
| [ 2.608384] mmcblk1: p1 p2 | |
| [ 2.700446] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities | |
| [ 2.711919] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities | |
| [ 3.649335] EXT4-fs (mmcblk1p2): recovery complete | |
| [ 3.655107] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) | |
| [ 3.663289] VFS: Mounted root (ext4 filesystem) on device 179:50. | |
| [ 3.674130] devtmpfs: mounted | |
| [ 3.677382] Freeing unused kernel memory: 340K | |
| [ 3.681843] This architecture does not have kernel memory protection. | |
| [ 3.807209] systemd[1]: System time before build time, advancing clock. | |
| [ 3.842182] random: systemd: uninitialized urandom read (16 bytes read, 24 bits of entropy available) | |
| [ 3.857727] random: systemd: uninitialized urandom read (16 bytes read, 24 bits of entropy available) | |
| [ 3.873367] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) | |
| [ 3.891880] systemd[1]: Detected architecture arm. | |
| Welcome to Arago 2016.12! | |
| [ 3.921000] systemd[1]: Set hostname to <dra7xx-evm>. | |
| [ 3.978497] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 25 bits of entropy available) | |
| [ 3.990435] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 25 bits of entropy available) | |
| [ 3.997224] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 25 bits of entropy available) | |
| [ 4.025881] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 27 bits of entropy available) | |
| [ 4.042360] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 27 bits of entropy available) | |
| [ 4.120504] random: systemd: uninitialized urandom read (16 bytes read, 31 bits of entropy available) | |
| [ 4.129985] random: systemd: uninitialized urandom read (16 bytes read, 31 bits of entropy available) | |
| [ 4.139825] random: systemd: uninitialized urandom read (16 bytes read, 31 bits of entropy available) | |
| [ 4.468095] systemd[1]: sockets.target: Found ordering cycle on sockets.target/start | |
| [ 4.475884] systemd[1]: sockets.target: Found dependency on dbus.socket/start | |
| [ 4.483108] systemd[1]: sockets.target: Found dependency on sysinit.target/start | |
| [ 4.490560] systemd[1]: sockets.target: Found dependency on alignment.service/start | |
| [ 4.498293] systemd[1]: sockets.target: Found dependency on basic.target/start | |
| [ 4.505548] systemd[1]: sockets.target: Found dependency on sockets.target/start | |
| [ 4.512998] systemd[1]: sockets.target: Breaking ordering cycle by deleting job dbus.socket/start | |
| [ 4.521929] systemd[1]: dbus.socket: Job dbus.socket/start deleted to break ordering cycle starting with sockets.target/start | |
| [ SKIP ] Ordering cycle found, skipping D-Bus System Message Bus Socket | |
| [ 4.557398] systemd[1]: sockets.target: Found ordering cycle on sockets.target/start | |
| [ 4.565184] systemd[1]: sockets.target: Found dependency on rpcbind.socket/start | |
| [ 4.572661] systemd[1]: sockets.target: Found dependency on sysinit.target/start | |
| [ 4.580130] systemd[1]: sockets.target: Found dependency on alignment.service/start | |
| [ 4.587867] systemd[1]: sockets.target: Found dependency on basic.target/start | |
| [ 4.595125] systemd[1]: sockets.target: Found dependency on sockets.target/start | |
| [ 4.602592] systemd[1]: sockets.target: Breaking ordering cycle by deleting job rpcbind.socket/start | |
| [ 4.611803] systemd[1]: rpcbind.socket: Job rpcbind.socket/start deleted to break ordering cycle starting with sockets.target/start | |
| [ SKIP ] Ordering cycle found, skipping RPCbind Server Activation Socket | |
| [ 4.637317] systemd[1]: sockets.target: Found ordering cycle on sockets.target/start | |
| [ 4.645101] systemd[1]: sockets.target: Found dependency on avahi-daemon.socket/start | |
| [ 4.653015] systemd[1]: sockets.target: Found dependency on sysinit.target/start | |
| [ 4.660481] systemd[1]: sockets.target: Found dependency on alignment.service/start | |
| [ 4.668218] systemd[1]: sockets.target: Found dependency on basic.target/start | |
| [ 4.675475] systemd[1]: sockets.target: Found dependency on sockets.target/start | |
| [ 4.682942] systemd[1]: sockets.target: Breaking ordering cycle by deleting job avahi-daemon.socket/start | |
| [ 4.692590] systemd[1]: avahi-daemon.socket: Job avahi-daemon.socket/start deleted to break ordering cycle starting with sockets.target/start | |
| [ SKIP ] Ordering cycle found, skipping Avah...S/DNS-SD Stack Activation Socket | |
| [ 4.727345] systemd[1]: dropbear.socket: Found ordering cycle on dropbear.socket/stop | |
| [ 4.735216] systemd[1]: dropbear.socket: Found dependency on sysinit.target/start | |
| [ 4.742781] systemd[1]: dropbear.socket: Found dependency on alignment.service/start | |
| [ 4.750598] systemd[1]: dropbear.socket: Found dependency on basic.target/start | |
| [ 4.758002] systemd[1]: dropbear.socket: Found dependency on sockets.target/start | |
| [ 4.765520] systemd[1]: dropbear.socket: Found dependency on dropbear.socket/stop | |
| [ 4.773075] systemd[1]: dropbear.socket: Breaking ordering cycle by deleting job alignment.service/start | |
| [ 4.782636] systemd[1]: alignment.service: Job alignment.service/start deleted to break ordering cycle starting with dropbear.socket/stop | |
| [ SKIP ] Ordering cycle found, skipping alignment.service | |
| [ 4.820458] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. | |
| [ OK ] Started Dispatch Password Requests to Console Directory Watch. | |
| [ 4.847295] systemd[1]: Listening on udev Control Socket. | |
| [ OK ] Listening on udev Control Socket. | |
| [ 4.867357] systemd[1]: Listening on Network Service Netlink Socket. | |
| [ OK ] Listening on Network Service Netlink Socket. | |
| [ 4.887254] systemd[1]: Listening on Journal Socket (/dev/log). | |
| [ OK ] Listening on Journal Socket (/dev/log). | |
| [ 4.907263] systemd[1]: Listening on Journal Socket. | |
| [ OK ] Listening on Journal Socket. | |
| [ 4.927225] systemd[1]: Listening on udev Kernel Socket. | |
| [ OK ] Listening on udev Kernel Socket. | |
| [ 4.947223] systemd[1]: Listening on Syslog Socket. | |
| [ OK ] Listening on Syslog Socket. | |
| [ 4.967324] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. | |
| [ OK ] Listening on /dev/initctl Compatibility Named Pipe. | |
| [ 4.997313] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
| [ OK ] Started Forward Password Requests to Wall Directory Watch. | |
| [ 5.028394] systemd[1]: Created slice System Slice. | |
| [ OK ] Created slice System Slice. | |
| [ 5.077428] systemd[1]: Starting Journal Service... | |
| Starting Journal Service... | |
| [ 5.107907] systemd[1]: Created slice system-serial\x2dgetty.slice. | |
| [ OK ] Created slice system-serial\x2dgetty.slice. | |
| [ 5.187335] systemd[1]: Mounting Temporary Directory... | |
| Mounting Temporary Directory... | |
| [ 5.209453] systemd[1]: Mounting POSIX Message Queue File System... | |
| Mounting POSIX Message Queue File System... | |
| [ 5.244658] systemd[1]: Starting Load Kernel Modules... | |
| Starting Load Kernel Modules... | |
| [ 5.269357] systemd[1]: Mounting Debug File System... | |
| Mounting Debug File System... | |
| [ 5.299520] systemd[1]: Starting Create list of required static device nodes for the current kernel... | |
| Starting Create list of required st... nodes for the current kernel... | |
| [ 5.327844] systemd[1]: Created slice system-getty.slice. | |
| [ OK ] Created slice system-getty.slice. | |
| [ 5.387308] systemd[1]: Starting Remount Root and Kernel File Systems... | |
| Starting Remount Root and Kernel File Systems... | |
| [ 5.404701] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) | |
| [ 5.410440] systemd[1]: Reached target Paths. | |
| [ OK ] Reached target Paths. | |
| [ 5.438622] systemd[1]: Created slice User and Session Slice. | |
| [ OK ] Created slice User and Session Slice. | |
| [ 5.457179] systemd[1]: Reached target Slices. | |
| [ OK ] Reached target Slices. | |
| [ 5.477182] systemd[1]: Reached target Remote File Systems. | |
| [ OK ] Reached target Remote File Systems. | |
| [ 5.497227] systemd[1]: Reached target Swap. | |
| [ OK ] Reached target Swap. | |
| [ 5.547349] systemd[1]: Starting Setup Virtual Console... | |
| Starting Setup Virtual Console... | |
| [ 5.573372] systemd[1]: Mounted POSIX Message Queue File System. | |
| [ OK ] Mounted POSIX Message Queue File System. | |
| [ 5.597238] systemd[1]: Mounted Debug File System. | |
| [ OK ] Mounted Debug File System. | |
| [ 5.617319] systemd[1]: Mounted Temporary Directory. | |
| [ OK ] Mounted Temporary Directory. | |
| [ 5.647409] systemd[1]: Started Journal Service. | |
| [ OK ] Started Journal Service. | |
| [FAILED] Failed to start Load Kernel Modules. | |
| See 'systemctl status systemd-modules-load.service' for details. | |
| [ OK ] Started Create list of required sta...ce nodes for the current kernel. | |
| [ OK ] Started Remount Root and Kernel File Systems. | |
| [ OK ] Started Setup Virtual Console. | |
| Starting udev Coldplug all Devices... | |
| Starting Create Static Device Nodes in /dev... | |
| Starting Apply Kernel Variables... | |
| Starting Flush Journal to Persistent Storage... | |
| [ OK ] Started Create Static Device Nodes in /dev. | |
| [ OK ] Started Apply Kernel Variables. | |
| [ 6.269836] systemd-journald[117]: Received request to flush runtime journal from PID 1 | |
| [ OK ] Started Flush Journal to Persistent Storage. | |
| Starting udev Kernel Device Manager... | |
| [ OK ] Reached target Local File Systems (Pre). | |
| Mounting /media/ram... | |
| Mounting /var/volatile... | |
| [ OK ] Mounted /var/volatile. | |
| [ OK ] Mounted /media/ram. | |
| [ OK ] Started udev Kernel Device Manager. | |
| [ OK ] Started udev Coldplug all Devices. | |
| [ 6.645296] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma@95800000 | |
| [ 6.671979] remoteproc0: 55020000.ipu is available | |
| [ 6.684290] remoteproc0: Note: remoteproc is still under development and considered experimental. | |
| [ 6.705705] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. | |
| [ 6.740884] omap-rproc 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 | |
| [ 6.759524] remoteproc1: 40800000.dsp is available | |
| Starting Load/Save Random Seed... | |
| [ OK ] Reached target Local File Systems. | |
| [ 6.781929] remoteproc1: Note: remoteproc is still under development and considered experimental. | |
| [ 6.795057] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. | |
| Starting Create Volatile Files and Directories... | |
| [ 6.826685] omap-rproc 41000000.dsp: assigned reserved memory node dsp2_cma@9f000000 | |
| [ 6.850174] remoteproc2: 41000000.dsp is available | |
| [ 6.865408] remoteproc2: Note: remoteproc is still under development and considered experimental. | |
| [ 6.888574] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. | |
| [ OK ] Found device /dev/ttyS0. | |
| [ 6.942505] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 | |
| [ 6.957989] remoteproc0: registered virtio0 (type 7) | |
| [ 6.982793] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 | |
| [ OK ] Started Load/Save Random Seed. | |
| [ OK ] Started Create Volatile Files and Directories. | |
| [ 7.068743] remoteproc1: registered virtio1 (type 7) | |
| [ 7.084233] omap_rtc 48838000.rtc: rtc core: registered 48838000.rtc as rtc0 | |
| [ 7.158582] remoteproc2: registered virtio2 (type 7) | |
| Starting Update UTMP about System Boot/Shutdown... | |
| [ 7.262284] SCSI subsystem initialized | |
| Starting Network Time Synchronization... | |
| [ 7.339781] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 | |
| [ OK ] Started Network Time Synchronization. | |
| [ 7.406262] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 | |
| [ OK ] Started Update UTMP about System Boot/Shutdown.[ 7.417726] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 | |
| [ 7.440443] CAN device driver interface | |
| [ 7.517218] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=fce3c000, irq=358) | |
| Starting Synchronize System and HW clocks... | |
| [ OK ] Reached target System Time Synchronized. | |
| [ OK ] Started Synchronize System and HW clocks. | |
| [ 7.590342] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1 | |
| [ 7.607359] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled | |
| [ 7.628143] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode | |
| [ 7.661923] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst | |
| [ 7.776003] scsi host0: ahci | |
| [ 7.779739] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 342 | |
| [ OK ] Reached target System Initialization. | |
| [ OK ] Started Daily Cleanup of Temporary Directories. | |
| [ OK ] Reached target Timers. | |
| [ OK ] Listening on dropbear.socket. | |
| [ OK ] Reached target Sockets. | |
| [ OK ] Reached target Basic System. | |
| [ 7.969023] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | |
| Starting Print notice about GPLv3 packages... | |
| [ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. | |
| Starting Save/Restore Sound Card State... | |
| Starting uim-sysfs.service... | |
| Starting TI MultiCore Tools Daemon... | |
| [ OK ] Started System Logging Service. | |
| Starting Permit User Sessions... | |
| Starting Network Service... | |
| [ OK ] Started Kernel Logging Service. | |
| [ OK ] Started Save/Restore Sound Card State. | |
| [ OK ] Started Permit User Sessions. | |
| [ 8.157037] ata1: SATA link down (SStatus 0 SControl 300) | |
| [FAILED] Failed to start TI MultiCore Tools Daemon. | |
| See 'systemctl status ti-mct-daemon.service' for details. | |
| [ 8.195868] net eth1: initializing cpsw version 1.15 (0) | |
| [ OK ] Started Network Service. | |
| [ 8.234583] net eth0: initialized cpsw ale version 1.4 | |
| [ 8.263256] net eth0: ALE Table size 1024 | |
| [ 8.293195] NET: Registered protocol family 15 | |
| [ 8.318197] net eth1: phy found : id is : 0x20005c7a | |
| [ 8.371771] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready | |
| [ 8.411130] net eth0: initializing cpsw version 1.15 (0) | |
| [ 8.454059] net eth0: phy found : id is : 0x20005c7a | |
| [ 8.499265] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready | |
| [ 8.594856] Initializing XFRM netlink socket | |
| [ 8.949514] remoteproc0: powering up 55020000.ipu | |
| [ 8.969231] remoteproc0: Booting fw image dra7-ipu2-fw.xem4, size 3506540 | |
| [ 8.986247] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 | |
| [ 9.040504] remoteproc0: remote processor 55020000.ipu is now up | |
| [ 9.058215] virtio_rpmsg_bus virtio0: rpmsg host is online | |
| [ 9.072003] remoteproc1: powering up 40800000.dsp | |
| [ 9.082869] random: nonblocking pool is initialized | |
| [ 9.089121] virtio_rpmsg_bus virtio0: creating channel rpmsg-proto addr 0x50 | |
| [ 9.098842] remoteproc1: Booting fw image dra7-dsp1-fw.xe66, size 2851415 | |
| [ 9.118291] omap_hwmod: mmu0_dsp1: _wait_target_disable failed | |
| [ 9.124176] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 | |
| [ 9.130114] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 | |
| [ 9.177883] remoteproc1: remote processor 40800000.dsp is now up | |
| [ 9.192761] virtio_rpmsg_bus virtio1: rpmsg host is online | |
| [ 9.198343] virtio_rpmsg_bus virtio1: creating channel rpmsg-proto addr 0x3d | |
| [ 9.214629] remoteproc2: powering up 41000000.dsp | |
| [ 9.231706] remoteproc2: Booting fw image dra7-dsp2-fw.xe66, size 2851415 | |
| [ 9.253303] omap_hwmod: mmu0_dsp2: _wait_target_disable failed | |
| [ 9.259191] omap-iommu 41501000.mmu: 41501000.mmu: version 3.0 | |
| [ 9.265153] omap-iommu 41502000.mmu: 41502000.mmu: version 3.0 | |
| [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. | |
| [ OK ] Reached target Sound Card. | |
| [ OK ] Reached target Network. | |
| Starting Lightning Fast Webserver With Light System Requirements... | |
| Starting Network Name Resolution... | |
| [ OK ] Started Serial Getty on ttyS0. | |
| [ OK ] Started Getty on tty1. | |
| [ 9.333515] remoteproc2: remote processor 41000000.dsp is now up | |
| [ 9.352288] virtio_rpmsg_bus virtio2: rpmsg host is online | |
| [ 9.357869] virtio_rpmsg_bus virtio2: creating channel rpmsg-proto addr 0x3d | |
| [ 9.396790] NET: Registered protocol family 41 | |
| [ OK ] Started Lightning Fast Webserver With Light System Requirements. | |
| [ OK ] Started Network Name Resolution. | |
| [ OK ] Started uim-sysfs.service. | |
| Starting rc.pvr.service... | |
| [ 9.802990] usbcore: registered new interface driver usbfs | |
| [ 9.815713] usbcore: registered new interface driver hub | |
| [ 9.821311] usbcore: registered new device driver usb | |
| [ 9.875783] dwc3 48890000.usb: otg: primary host xhci-hcd.0.auto registered | |
| [ 9.882994] dwc3 48890000.usb: otg: shared host xhci-hcd.0.auto registered | |
| [ 9.891959] dwc3 48890000.usb: otg: can't start till gadget registers | |
| [ 9.898961] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ] | |
| [ 9.899590] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller | |
| [ 9.899610] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 | |
| [ 9.919300] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00210010 | |
| [ 9.928175] xhci-hcd xhci-hcd.1.auto: irq 500, io mem 0x488d0000 | |
| [ 9.934831] hub 1-0:1.0: USB hub found | |
| [ 9.941470] hub 1-0:1.0: 1 port detected | |
| [ 9.945820] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller | |
| [ 9.953060] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 | |
| [ 9.962386] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. | |
| [ 9.972707] hub 2-0:1.0: USB hub found | |
| [ 9.976564] hub 2-0:1.0: 1 port detected | |
| [ OK ] Started rc.pvr.service. | |
| Starting weston.service... | |
| [ OK ] Started weston.service. | |
| Starting telnetd.service... | |
| Starting tiipclad-daemon.service... | |
| [ OK ] Started telnetd.service. | |
| [ OK ] Started tiipclad-daemon.service. | |
| Starting thttpd.service... | |
| [ OK ] Started thttpd.service. | |
| Starting rng-tools.service... | |
| [ OK ] Started rng-tools.service. | |
| Starting gdbserverproxy.service... | |
| [ OK ] Started gdbserverproxy.service. | |
| Starting matrix-gui-2.0.service... | |
| [ OK ] Started matrix-gui-2.0.service. | |
| Starting thermal-zone-init.service... | |
| [ OK ] Started thermal-zone-init.service. | |
| [ 10.454575] cpsw 48484000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx | |
| [ 10.462890] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
| *************************************************************** | |
| *************************************************************** | |
| NOTICE: This file system contains the following GPLv3 packages: | |
| autoconf | |
| binutils-dev | |
| binutils | |
| bison-dev | |
| bison | |
| cpp-symlinks | |
| cpp | |
| dosfstools | |
| g++-symlinks | |
| g++ | |
| gawk-dev | |
| gawk | |
| gcc-symlinks | |
| gcc | |
| gdb | |
| gdbc6x | |
| gdbserver | |
| gstreamer1.0-libav | |
| libcairo-perf-utils | |
| libgmp10 | |
| libidn11 | |
| libmpc3 | |
| libmpfr4 | |
| m4-dev | |
| m4 | |
| make | |
| nettle | |
| parted | |
| swig-dev | |
| swig | |
| If you do not wish to distribute GPLv3 components please remove | |
| the above packages prior to distribution. This can be done using | |
| the opkg remove command. i.e.: | |
| opkg remove <package> | |
| Where <package> is the name printed in the list above | |
| NOTE: If the package is a dependency of another package you | |
| will be notified of the dependent packages. You should | |
| use the --force-removal-of-dependent-packages option to | |
| also remove the dependent packages as well | |
| *************************************************************** | |
| *************************************************************** | |
| [ OK ] Started Print notice about GPLv3 packages. | |
| _____ _____ _ _ | |
| | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | |
| | | _| .'| . | . | | __| _| . | | | -_| _| _| | |
| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| | |
| |___| |___| | |
| Arago Project http://arago-project.org dra7xx-evm ttyS0 | |
| Arago 2016.12 dra7xx-evm ttyS0 | |
| dra7xx-evm login: root | |
| root@dra7xx-evm:~# [ 19.194447] omap_hwmod: mmu1_dsp1: _wait_target_disable failed | |
| [ 19.208354] omap_hwmod: mmu0_dsp1: _wait_target_disable failed | |
| [ 20.084449] omap_hwmod: mmu1_dsp2: _wait_target_disable failed | |
| [ 20.098354] omap_hwmod: mmu0_dsp2: _wait_target_disable failed | |
| root@dra7xx-evm:~# | |
| root@dra7xx-evm:~# | |
| root@dra7xx-evm:~# | |
| root@dra7xx-evm:~# | |
| root@dra7xx-evm:~# | |
| root@dra7xx-evm:~# root | |
| -sh: root: command not found | |
| root@dra7xx-evm:~# | |
| root@dra7xx-evm:~# | |
| root@dra7xx-evm:~# | |
| root@dra7xx-evm:~# cd /opt/vision_sdk/ | |
| root@dra7xx-evm:/opt/vision_sdk# ls | |
| FragShader.fsh VipClockInversion.sh cmemk.ko enableIpu2CCSConectivity.sh load_ocl_kos.sh opencl_env.sh ub964Init.sh | |
| FragShader3Dsfm.fsh apps.out debugss_kmodule.ko gdbserverproxy.ko memcache_load.sh ov106x3Config.sh vision_sdk_load.sh | |
| VertShader.vsh bin disableDssInterruptsOnA15.sh hdmiReceiverConfig.sh memcache_unload.sh pvrscope vision_sdk_ov490_pinmux.sh | |
| VertShader3Dsfm.vsh car.pod enableImx290.sh jeep2.bmp models tda2exEnableAVB.sh vision_sdk_unload.sh | |
| root@dra7xx-evm:/opt/vision_sdk# ./load_ocl_kos.sh | |
| Opened log file: lad.txt | |
| numProcessors = 5 id = 0 baseId = 0 | |
| Spawned daemon: /usr/bin/lad_dra7xx | |
| [ 49.788875] CMEMK module: reference Linux version 4.4.84 | |
| [ 49.794888] allocated heap buffer 0x40400000 of size 0x100000 | |
| [ 49.801212] cmemk initialized | |
| root@dra7xx-evm:/opt/vision_sdk# source ./vision_sdk_load.sh | |
| [ 71.469463] DMA: Module install successful, device major num = 242 | |
| [ 71.475909] DRV: Module install successful | |
| insmod: ERROR: could not insert module ./bin/cmemk.ko: File exists | |
| ./disableDssInterruptsOnA15.sh: line 11: @0x4A002AC4:: command not found | |
| ./disableDssInterruptsOnA15.sh: line 12: @0x4A002AC4:: command not found | |
| ./disableDssInterruptsOnA15.sh: line 13: @0x4A002AC4:: command not found | |
| ./disableDssInterruptsOnA15.sh: line 14: @0x4A002AC4:: command not found | |
| ./disableDssInterruptsOnA15.sh: line 15: @0x4A002AC4:: command not found | |
| ./disableDssInterruptsOnA15.sh: line 16: @0x4A002AC4:: command not found | |
| ./disableDssInterruptsOnA15.sh: line 17: @0x4A002AC4:: command not found | |
| ./disableDssInterruptsOnA15.sh: line 18: @0x4A002AC4:: command not found | |
| ./disableDssInterruptsOnA15.sh: line 19: @0x4A002AC4:: command not found | |
| updated 0x4A002AC4 value is 00930000 | |
| root@dra7xx-evm:/opt/vision_sdk# ./apps.out | |
| [HOST] OSA: MEM: 0: Mapped 0xa0100000 to 0xb65af000 of size 0x00100000 | |
| [HOST] OSA: MEM: 1: Mapped 0x84203000 to 0xa6baf000 of size 0x0fa00000 | |
| [HOST] OSA: MEM: 2: Mapped 0xa0200000 to 0xa6aef000 of size 0x00040000 | |
| [HOST] OSA: MEM: 3: Mapped 0xa02c0000 to 0xa6b2f000 of size 0x00080000 | |
| [HOST] OSA: MEM: 4: Mapped 0x00000000 to 0x00000000 of size 0x00000000 | |
| [HOST] OSA: HOST Remote Log Shared Memory @ 0xa024f140 | |
| [HOST] OSA: IPU2 Remote Log Shared Memory @ 0xa0363da0 | |
| 80.228166] omap_l3_noc 44000000.ocp: L3 application error: target 3 mod:2 (unclearable) | |
| [ 80.265311] omap_l3_noc 44000000.ocp: L3 debug error: target 3 mod:2 (unclearable) | |
| [ HOST] [HOST ] 143.146098 s: SYSTEM: System A15 Init in proress !!! | |
| [HOST] [HOST ] 143.146190 s: SYSTEM: IPC: Init in progress !!! | |
| [HOST] [HOST ] 143.146190 s: SYSTEM: IPC: Notify init in progress !!! | |
| [HOST] [HOST ] 143.147501 s: SYSTEM: IPC: [IPU2] socket bind success !!! (dst vproc = 1, endpt = 81) | |
| [HOST] [HOST ] 143.147532 s: SYSTEM: IPC: [IPU2] socket info (family = 41, dst proc id = -1, endpt = 81) !!! | |
| [HOST] [HOST ] 143.147593 s: SYSTEM: IPC: [IPU2] socket connect success !!! (dst vproc = 1, endpt = 80) | |
| [HOST] [HOST ] 143.147593 s: SYSTEM: IPC: [IPU2] socket info (family = 41, dst proc id = -1, endpt = 1024) !!! | |
| [HOST] [HOST ] 143.147715 s: SYSTEM: IPC: Notify init DONE !!! | |
| [HOST] [HOST ] 143.147745 s: SYSTEM: MSGQ: MsgQ init in progress !!! | |
| [HOST] [HOST ] 143.147837 s: SYSTEM: MSGQ: MsgQ init DONE !!! | |
| [HOST] [HOST ] 143.147837 s: SYSTEM: IPC: Init DONE !!! | |
| [HOST] [HOST ] 143.147837 s: SYSTEM: Initializing A15 Links !!! | |
| [HOST] [HOST ] 143.147959 s: IPC_OUT_0 : Init done - linkid-0x2000000 | |
| [HOST] [HOST ] 143.148081 s: IPC_OUT_1 : Init done - linkid-0x2000001 | |
| [HOST] [HOST ] 143.148173 s: IPC_OUT_2 : Init done - linkid-0x2000002 | |
| [HOST] [HOST ] 143.148264 s: IPC_OUT_3 : Init done - linkid-0x2000003 | |
| [HOST] [HOST ] 143.148478 s: IPC_OUT_4 : Init done - linkid-0x2000004 | |
| [HOST] [HOST ] 143.148600 s: IPC_IN_0 : Init done - linkid-0x200000a | |
| [HOST] [HOST ] 143.148722 s: IPC_IN_1 : Init done - linkid-0x200000b | |
| [HOST] [HOST ] 143.148844 s: IPC_IN_2 : Init done - linkid-0x200000c | |
| [HOST] [HOST ] 143.148935 s: IPC_IN_3 : Init done - linkid-0x200000d | |
| [HOST] [HOST ] 143.149057 s: IPC_IN_4 : Init done - linkid-0x200000e | |
| [HOST] [HOST ] 143.149149 s: IPC_IN_5 : Init done - linkid-0x200000f | |
| [HOST] [HOST ] 143.149271 s: IPC_IN_6 : Init done - linkid-0x2000010 | |
| [HOST] [HOST ] 143.149362 s: NULL_0 : Init done - linkid-0x2000014 | |
| [HOST] [HOST ] 143.149454 s: NULL_1 : Init done - linkid-0x2000015 | |
| [HOST] [HOST ] 143.149576 s: NULL_SRC_0 : Init done - linkid-0x2000039 | |
| [HOST] [HOST ] 143.149667 s: ALGORITHM_0 : Init done - linkid-0x2000031 | |
| [HOST] [HOST ] 143.149789 s: ALGORITHM_1 : Init done - linkid-0x2000032 | |
| [HOST] [HOST ] 143.149881 s: ALGORITHM_2 : Init done - linkid-0x2000033 | |
| [HOST] [HOST ] 143.150003 s: ALGORITHM_3 : Init done - linkid-0x2000034 | |
| [HOST] [HOST ] 143.150094 s: ALGORITHM_4 : Init done - linkid-0x2000035 | |
| [HOST] [HOST ] 143.150186 s: ALGORITHM_5 : Init done - linkid-0x2000036 | |
| [HOST] [HOST ] 143.150277 s: ALGORITHM_6 : Init done - linkid-0x2000037 | |
| [HOST] [HOST ] 143.150369 s: ALGORITHM_7 : Init done - linkid-0x2000038 | |
| [HOST] [HOST ] 143.150552 s: DUP0 : Init done - linkid-0x0 | |
| [HOST] [HOST ] 143.150704 s: DUP1 : Init done - linkid-0x0 | |
| [HOST] [HOST ] 143.150857 s: DUP2 : Init done - linkid-0x0 | |
| [HOST] [HOST ] 143.151040 s: DUP3 : Init done - linkid-0x0 | |
| [HOST] [HOST ] 143.151192 s: DUP4 : Init done - linkid-0x0 | |
| [HOST] [HOST ] 143.151284 s: SYNC_0 : Init done - linkid-0x0 | |
| [HOST] [HOST ] 143.151436 s: SYNC_1 : Init done - linkid-0x0 | |
| [HOST] [HOST ] 143.151589 s: SYNC_2 : Init done - linkid-0x0 | |
| [HOST] [HOST ] 143.151741 s: SYNC_3 : Init done - linkid-0x0 | |
| [HOST] [HOST ] 143.151924 s: MERGE_0 : Init done - linkid-0x0 | |
| [HOST] [HOST ] 143.155005 s: MERGE_1 : Init done - linkid-0x0 | |
| [HOST] [HOST ] 143.155127 s: MERGE_2 : Init done - linkid-0x0 | |
| [HOST] [HOST ] 143.155249 s: MERGE_3 : Init done - linkid-0x0 | |
| [HOST] [HOST ] 143.155523 s: MERGE_4 : Init done - linkid-0x0 | |
| [HOST] [HOST ] 143.155645 s: SELECT_0 : Init done - linkid-0x0 | |
| [HOST] [HOST ] 143.155767 s: SELECT_1 : Init done - linkid-0x0 | |
| [HOST] [HOST ] 143.155859 s: GATE_0 : Init done - linkid-0x0 | |
| [HOST] [HOST ] 143.155950 s: GATE_1 : Init done - linkid-0x0 | |
| [HOST] [HOST ] 143.156011 s: GATE_2 : Init done - linkid-0x0 | |
| [HOST] [HOST ] 143.156103 s: GATE_3 : Init done - linkid-0x0 | |
| [HOST] [HOST ] 143.157201 s: SGXFRMCPY_0 : Init done - linkid-0x2000040 | |
| [HOST] [HOST ] 143.157231 s: SYSTEM: Initializing A15 Links ... DONE !!! | |
| [HOST] [HOST ] 143.157689 s: OSA: Adjusting global time, timeH by 0 units!!! | |
| [HOST] [HOST ] 143.157689 s: SYSTEM: System A15 Init Done !!! | |
| [HOST] [HOST ] 143.157841 s: NETWORK_CTRL: Starting Server (port=5000) !!! | |
| [HOST] [HOST ] 143.157902 s: NETWORK_CTRL: Starting Server ... DONE (port=5000) !!! | |
| [HOST] [IPU2 ] 72.002958 s: ***** IPU2 Firmware build time 20:58:27 Jun 7 2018 | |
| [HOST] [IPU2 ] 72.003141 s: *** SYSTEM: CPU Frequency <ORG = 212800000 Hz>, <NEW = 212800000 Hz> | |
| [HOST] [IPU2 ] 72.006008 s: SYSTEM: System Common Init in progress !!! | |
| [HOST] [IPU2 ] 72.014975 s: SYSTEM: IPC init in progress !!! | |
| [HOST] [IPU2 ] 72.015097 s: SYSTEM: Notify init done !!! | |
| [HOST] [IPU2 ] 72.016836 s: SYSTEM: MsgQ init done !!! | |
| [HOST] [IPU2 ] 72.017781 s: RpmsgInit in progress... | |
| [HOST] [IPU2 ] 72.017842 s: Connection established with HLOS, calling rpmsgInit | |
| [HOST] [IPU2 ] 72.018513 s: SYSTEM: IPC init DONE !!! | |
| [HOST] [IPU2 ] 72.023607 s: SYSTEM: System Common Init Done !!! | |
| [HOST] [IPU2 ] 72.023699 s: SYSTEM: System Init in progress !!! | |
| [HOST] [IPU2 ] 72.023790 s: SYSTEM: BSP Common Init in progress !!! | |
| [HOST] [IPU2 ] 72.023851 s: SYSTEM: BSP Common Init Done !!! | |
| [HOST] [IPU2 ] 72.023912 s: SYSTEM: BSP Platform Init in progress !!! | |
| [HOST] [IPU2 ] 72.024004 s: SYSTEM: BSP Platform Init Done !!! | |
| [HOST] [IPU2 ] 72.024065 s: SYSTEM: FVID2 Init in progress !!! | |
| [HOST] [IPU2 ] 72.024217 s: SYSTEM: FVID2 Init Done !!! | |
| [HOST] [IPU2 ] 72.024278 s: SYSTEM: VPS Init in progress !!! | |
| [HOST] [IPU2 ] 72.024370 s: SYSTEM: VPDMA Descriptor Memory Address translation ENABLED [0x80000000 -> 0x80000000] | |
| [HOST] [IPU2 ] 72.027176 s: *** VPDMA Firmware Loading... *** | |
| [HOST] [IPU2 ] 72.027298 s: VPDMA Firmware Address = 0xa0349a80 | |
| [HOST] [IPU2 ] 72.027450 s: VPDMA Load Address = 0x4897d004 | |
| [HOST] [IPU2 ] 72.027542 s: VPDMA Firmware Version = 0x4d0001b8 | |
| [HOST] [IPU2 ] 72.027633 s: VPDMA List Busy Status = 0x00000000 | |
| [HOST] [IPU2 ] 72.027694 s: *** VPDMA Firmware Load Success *** | |
| [HOST] [IPU2 ] 72.028030 s: *** VPDMA Firmware Loading... *** | |
| [HOST] [IPU2 ] 72.028121 s: VPDMA Firmware Address = 0xa0349a80 | |
| [HOST] [IPU2 ] 72.028213 s: VPDMA Load Address = 0x4899d004 | |
| [HOST] [IPU2 ] 72.028304 s: VPDMA Firmware Version = 0x4d0001b8 | |
| [HOST] [IPU2 ] 72.028396 s: VPDMA List Busy Status = 0x00000000 | |
| [HOST] [IPU2 ] 72.028487 s: *** VPDMA Firmware Load Success *** | |
| [HOST] [IPU2 ] 72.028792 s: *** VPDMA Firmware Loading... *** | |
| [HOST] [IPU2 ] 72.028884 s: VPDMA Firmware Address = 0xa0349a80 | |
| [HOST] [IPU2 ] 72.028975 s: VPDMA Load Address = 0x489bd004 | |
| [HOST] [IPU2 ] 72.029067 s: VPDMA Firmware Version = 0x4d0001b8 | |
| [HOST] [IPU2 ] 72.029158 s: VPDMA List Busy Status = 0x00000000 | |
| [HOST] [IPU2 ] 72.029219 s: *** VPDMA Firmware Load Success *** | |
| [HOST] [IPU2 ] 72.082779 s: SYSTEM: VPS Init Done !!! | |
| [HOST] [IPU2 ] 72.083633 s: UTILS: DMA: HWI Create for INT25 !!! | |
| [HOST] [IPU2 ] 72.083877 s: SYSTEM: SW Message Box Msg Pool, Free Msg Count = 1024 | |
| [HOST] [IPU2 ] 72.083968 s: SYSTEM: Heap = LOCAL_DDR @ 0x00000000, Total size = 262144 B (256 KB), Free size = 260728 B (254 KB) | |
| [HOST] [IPU2 ] 72.084121 s: SYSTEM: Heap = SR_OCMC @ 0x00000000, Total size = 0 B (0 KB), Free size = 0 B (0 KB) | |
| [HOST] [IPU2 ] 72.084273 s: SYSTEM: Heap = SR_DDR_CACHED @ 0x84203000, Total size = 262144000 B (250 MB), Free size = 262144000 B (250 MB) | |
| [HOST] [IPU2 ] 72.084517 s: SYSTEM: Heap = SR_DDR_NON_CACHED @ 0xa0100000, Total size = 1047168 B (0 MB), Free size = 1047168 B (0 MB) | |
| [HOST] [IPU2 ] 72.084670 s: SYSTEM: Initializing Links !!! | |
| [HOST] [IPU2 ] 72.233697 s: SYSTEM: Initializing Links ... DONE !!! | |
| [HOST] [IPU2 ] 72.234368 s: CHAINS: Application Started !!! | |
| [HOST] [IPU2 ] 72.243183 s: BOARD: Board Init in progress !!! | |
| [HOST] [IPU2 ] 72.243640 s: BOARD: Board Init Done !!! | |
| [HOST] [IPU2 ] 72.250594 s: | |
| [HOST] [HOST ] 143.704508 s: | |
| [HOST] [HOST ] | |
| [HOST] [HOST ] ==================== | |
| [HOST] [HOST ] Vision SDK Usecases | |
| [HOST] [HOST ] ==================== | |
| [HOST] [HOST ] 1: Single Camera Usecases | |
| [HOST] [HOST ] 2: Multi-Camera LVDS Usecases | |
| [HOST] [HOST ] 3: Open-Compute Usecases | |
| [HOST] [HOST ] | |
| [HOST] [HOST ] p: CPU Status | |
| [HOST] [HOST ] i: Show IP Addr (IPU + NDK + AVB) | |
| [HOST] [HOST ] | |
| [HOST] [HOST ] s: System Settings | |
| [HOST] [HOST ] | |
| [HOST] [HOST ] x: Exit | |
| [HOST] [HOST ] z: Exit - AND SHUTDOWN Remote CPUs | |
| [HOST] [HOST ] | |
| [HOST] [HOST ] Enter Choice: | |
| [HOST] [HOST ] | |
| 3 | |
| [HOST] [HOST ] 147.803117 s: | |
| [HOST] [HOST ] | |
| [HOST] [HOST ] OpenCompute Usecases | |
| [HOST] [HOST ] ---------------------------- | |
| [HOST] [HOST ] 2: OpenCV Usecases | |
| [HOST] [HOST ] 3: OpenCL Usecases | |
| [HOST] [HOST ] | |
| [HOST] [HOST ] x: Exit | |
| [HOST] [HOST ] | |
| [HOST] [HOST ] Enter Choice: | |
| [HOST] [HOST ] | |
| [HOST] [HOST ] 147.803178 s: | |
| [HOST] [HOST ] 147.803178 s: Unsupported option ' | |
| [HOST] [HOST ] '. Please try again | |
| [HOST] [HOST ] 147.803178 s: | |
| [HOST] [HOST ] | |
| [HOST] [HOST ] OpenCompute Usecases | |
| [HOST] [HOST ] ---------------------------- | |
| [HOST] [HOST ] 2: OpenCV Usecases | |
| [HOST] [HOST ] 3: OpenCL Usecases | |
| [HOST] [HOST ] | |
| [HOST] [HOST ] x: Exit | |
| [HOST] [HOST ] | |
| [HOST] [HOST ] Enter Choice: | |
| [HOST] [HOST ] | |
| 3 | |
| [HOST] [HOST ] 153.651375 s: | |
| [HOST] [HOST ] 153.651375 s: | |
| [HOST] [HOST ] | |
| [HOST] [HOST ] OpenCL Usecases | |
| [HOST] [HOST ] ---------------------------- | |
| [HOST] [HOST ] 1: 1CH VIP capture + OpenCL Copy (A15->DSP) + SGX Copy + DISPLAY | |
| [HOST] [HOST ] | |
| [HOST] [HOST ] x: Exit | |
| [HOST] [HOST ] | |
| [HOST] [HOST ] Enter Choice: | |
| [HOST] [HOST ] | |
| 1 | |
| [HOST] [HOST ] 159.932105 s: | |
| [HOST] [IPU2 ] 159.932257 s: CHAINS: Sensor create in progress | |
| [HOST] [IPU2 ] 159.932776 s: VIDEO_SENSOR: INST0 : I2C1 : I2C Addr = 0x30 | |
| [HOST] [IPU2 ] 160.026932 s: VIDEO_SENSOR: VIP 0: DRV ID 1203 (I2C ADDR 0x30): a635:0000:7fa2 | |
| [HOST] [IPU2 ] 160.027237 s: CHAINS: Sensor create ... DONE !!! | |
| [HOST] [IPU2 ] 160.042213 s: CAPTURE: Create in progress !!! | |
| [HOST] [IPU2 ] 160.042579 s: CAPTURE: VIP1 Slice0 PortA capture mode is [ 8-bit] !!! | |
| ASSERT (chains_vipSingleCamOpenCLFrameCopySgxDisplay_priv.c|chains_vipSingleCamOpenCLFrameCopySgxDisplay_Create|165) | |
| [HOST] [HOST ] 160.158726 s: IPC_IN_0 : Create in progress !!! | |
| [HOST] [HOST ] 160.159092 s: IPC_IN_0 : Create Done !!! | |
| [HOST] [HOST ] 160.159153 s: ALG: ERROR: No alg create function specified (algId = 6) !!! | |
| [HOST] [IPU2 ] 160.157658 s: CAPTURE: Create Done !!! | |
| [HOST] [IPU2 ] 160.158146 s: IPC_OUT_0 : Create in progress !!! | |
| [HOST] [IPU2 ] 160.158482 s: IPC_OUT_0 : Create Done !!! Is there a problem with my build environment or other reasons? I have been plagued by this problem for a long time. | |
| Responses: | |
| Hi Xie Baojian, As per step-9, I can see you didn't run these commands make linux and make linux_install Could you please confirm ? Regards Surya | |
| Hi Surya, Sorry, I forgot to write, i ran make linux and make linux_install. 9. make clean ; make liunx_clean; make linux； make linux_install； make -s -j dpend ; make -s -j opencx; Regards, Xie Baojian | |
| Is it tda2xx_evm can not support openclframecopy usecase ? | |
| Hi Xie Baojian, Yes tda2xx-evm supports openclframecopy usecase We are trying to reproduce the issue in our end We will revert back you soon Regards Surya | |
| Hi Surya, I am very much looking forward to your response. Below I will list my steps in detail in order to give you a better positioning problem. Follow the steps below to build the vision_sdk environment to run the opencl example： 1、 Install A15 Compiler： $> cd $INSTALL_DIR/ti_components/os_tools/linux/linaro $> tar –xvf gcc-linaro-5.3-2016.02-x86_64_arm-linux-gnueabihf.tar.xz Install 64-bit packages： $>sudo apt-get install ia32-libs lib32stdc++6 lib32z1-dev lib32z1 lib32ncurses5 lib32bz2-1.0 2、 Clone Linux kernel, cmem,uboot, sgx driver and target file system 2.1. Install software packages：run hlos/scripts/linux/setup-linux-build-env.sh 2.2. Softwore Install: $> bash $> ./PROCESSOR_SDK_VISION_XX_XX_XX_XX_setuplinux.bin export INSTALL_DIR=/home/hancan/PROCESSOR_SDK_VISION_03_02_00_00 2.3. Edit gitconfig，create git-proxy.sh. 2.4. run script: ./hlos/scripts/linux/setup_linux.sh. 2.5. Clone kernel. 2.6. Clone cmem. 2.7. Clone u-boot. 2.8. Clone sgx driver. 2.9. Download and untar file system.add permissions for $INSTALL_DIR/ti_components/os_tools/linux/targetfs：chmod 777 ../targetfs. 2.10. Install Opencl supported package. Clone dsptop and Clone gdbc6x. 2.11. untar opencl_fs_patches.tar.gz in $INSTALL_DIR/ti_components/os_tools/linux/targetfs . 3、 Compile and Build 3.1. Select make config in Rules.make:MAKECONFIG=tda2xx_evm_linux_opencx. 3.2. set system path: PATH="/home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/ti_components/cg_tools/linux/ti-cgt-c6000_8.1.0/bin:/home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/ti_components/open_compute/opencl_rtos_am57xx_01_01_10_00/packages/ti/clocl:/home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/ti_components/os_tools/linux/targetfs/usr/share/ti/opencl/bin/x86:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games". KERNEL_INSTALL_DIR="/home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/ti_components/os_tools/linux/kernel" 3.3. Cd /vision_sdk/build. 3.4. run: rm -rf ../binaries/. 3.5. run: make clean. 3.6. run: make linux_clean. 3.7. run: make linux. 3.8. run: make linux_install. 3.9. run: make –s –j depend. 3.10. run: make –s –j opencx. 3.11. use uenv_sd.txt as boot's uenv.txt. 4、 There is no error in the above steps.cd to the path :/home/hancan/PROCESSOR_SDK_VISION_03_02_00_00/ti_components/os_tools/linux/targetfs and run :cp -Rf * /media/hancan/rootfs. 5、 Insert SD card into board.Log in used root and run :source ./opencl_env.sh. 6、 run :./load_ocl_kos.sh. 7、 run :source ./vision_sdk_load.sh. 8、 run :./apps.out. Regards, Xie Baojian | |