Datasets:

ramixpe

/

sp_dataset_llama

like 0

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SHELFMGR-3-SHUTDOWN_ON_BOARD_FAULT ### Response: (Severity: 3), (Category: PLATFORM), (Description: This message indicates that the node is being brought down to IN_RESET state due to occurence of multiple critical faults/alarms on the node.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FSDB-3-ERR_SYSDB_EDM_NOTIF_GEN ### Response: (Severity: 3), (Category: FABRIC), (Description: FSDB external data manager failed to generate a trap notification. Process would continue to run normally.), (Recommended Action: This message indicate that trap notifications of the operational states of planes and bundles would not occur. If snmp managability is not enabled, this message can be ignored. However, if this functionality is necessary then restart the process by issuing the following command at the CLI of the active RP after collecting all the output of all the specified commands. 'admin process restart fsdb_server/fsdb_aserver loc <loc>' Restart fsdb_server if the bundle state traps are missing else if plane state traps are missing restart fsdb_aserver. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BACKUPSSHD-3-ERR_MALLOC ### Response: (Severity: 3), (Category: SECURITY), (Description: Internal error. System is out of memory - malloc failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: OSPF-4-INVALID_ADJ_SID ### Response: (Severity: 4), (Category: ROUTING), (Description: When adjacency SID value is configured, it should be within the SR Local Block configured on the router (default 15000-15999). The adjacency SID will not be used until this config inconsistency is resolved.), (Recommended Action: Fix the configuration such that the Adjacency SID value lies within SRLB. Ignore if this is already done and warning will repeat until this is fixed.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: RTC-7-CAL_CHIP_READ_RTC ### Response: (Severity: 7), (Category: MGBL), (Description: Reading value of RTC at particular time.), (Recommended Action: Debug message only. No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MPLS_TE-3-ERR_LMRIB_LABEL_RW ### Response: (Severity: 3), (Category: ROUTING), (Description: A LMRIB Label Rewrite related error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Collect: -show logging -show tech-support mpls traffic-eng -show lmrib client trace for further analysis of the issue.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: DAPS-5-UTIL_HIGH ### Response: (Severity: 5), (Category: IP), (Description: Utilization exceeded high threshold across all pools. The unallocated addresses may deplete very soon and so it would be good to add more pools or address ranges for allocation to new clients. Otherwise new allocation requests will fail. Pool utilization can be monitored using the command 'show pool ipv4/ipv6'.), (Recommended Action: Add more pools or address ranges for allocation. For details regarding related configurations, please refer 'Address Pool Service Commands' chapter in Cisco IOS XR software configuration guide.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MEDIAAPI-4-MSG_SEND_FAILED ### Response: (Severity: 4), (Category: MEDIA), (Description: The message sent to the media server failed for the specified operation number and failed for the specified reason.), (Recommended Action: Report this message to TAC if the message showed up once but recovered Report this message to TAC together with console log, 'show media', 'show media trace' if message continues)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MSDP-4-PEER_FAIL ### Response: (Severity: 4), (Category: ROUTING), (Description: Some peer error occured. This is just a warning. Please ensure that the msdp peers are configured correctly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show msdp trace peer<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show msdp trace peer<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: OSPFv3_EDM-3-LIST_CREATE_FAILED ### Response: (Severity: 3), (Category: ROUTING), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The creation of the external data manager list has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IMUX-3-TX_FF_OVF_ERR_FIA10 ### Response: (Severity: 3), (Category: PLATFORM), (Description: Ingress MUX FPGA encountered FIA10 Tx burst FIFO overflow error.), (Recommended Action: Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ANCP-3-IM_INIT_FAIL ### Response: (Severity: 3), (Category: IP), (Description: A software error occurred when the ANCP process tried to perform initialization with the interface manager process. The error could be because Interface Manager is unavailable at the time of ANCP initialization or a software error in either of ANCP or Interface Manager processes.), (Recommended Action: The process will attempt to recover from this situation by restarting. If this message is not seen again and if ANCP process is able to initialize and come up successfully after restart, then there is no need to take any action. Otherwise if the message's error code indicates that the failure was due to lack of memory, then take the following action. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. If the problem was not caused by memory allocation and it hasn't been corrected by subsequence restarts then take the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: OSPF-4-CONFLICTING_LSAID ### Response: (Severity: 4), (Category: ROUTING), (Description: An LSA could not be generated because there is a supernet lsa with the host bit set LSA ID that conflicts with the major net LSA ID that also needs to have host bit set.), (Recommended Action: This is a limitation in OSPF's ability to handle conflicting LSA IDs. Attempt to avoid this limitation by modifying the generation of summary LSA's so that the LSA ID's do not conflict. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BRIDGE-1-QDR_DATABIT_STUCK_1 ### Response: (Severity: 1), (Category: PLATFORM), (Description: QDR memory databit stuck on bridge instance-1.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: NPUXBAR_BRIDGE-1-LBUS_READ_TIMEOUT ### Response: (Severity: 1), (Category: PLATFORM), (Description: Local Bus read operation timeout error.), (Recommended Action: None.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIB-2-SR_TE_LL_INVAL_NEXTOBJ ### Response: (Severity: 2), (Category: ROUTING), (Description: lspnh ll programmed to drop because of invalid next obj), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIB-2-OOR_TBL ### Response: (Severity: 2), (Category: ROUTING), (Description: The FIB process on the node has detected an out of resource condition for the indicated resource. Normal operation cannot resume until routes/tables are deleted and customer does a recreate of the table.), (Recommended Action: Run the following command and check which resource(s) are running low on memory: <CmdBold>show cef resource location <node><NoCmdBold> Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Significant routes/tables will have to be deleted followed by a reconfiguration of the table.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FLOWTRAP-4-BAD_ACTOR_MAC_DELETED ### Response: (Severity: 4), (Category: OS), (Description: A source MAC address that was previously flagged by the punt flow trap has been removed from the 'penalty box' because the interface on which it was flagged has been deleted.), (Recommended Action: No action necessary. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ACCT_MA-3-CFG_UNDEFINED ### Response: (Severity: 3), (Category: SUBSCRIBER), (Description: The prepaid configuration name that was specified in the prepaid command has not been defined in the system.), (Recommended Action: Define a prepaid configuration with the name used in the prepaid command or change the name in the command to an existing prepaid configuration. If the prepaid configuration is defined, then its an internal error. If issue persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: INSTMGR-4-LRD_CALL_STILL_TRYING ### Response: (Severity: 4), (Category: INSTALL), (Description: The install manager needs to call some APIs to retrieve information during its initialization. If the information is not retrieved successfully install director will retry after a small time interval until success.), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: exec-3-EVENT_BLOCK ### Response: (Severity: 3), (Category: MGBL), (Description: The call to event_block() failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLAT_VETHER_DRIVER-3-REPORT_BER_SET ### Response: (Severity: 3), (Category: PLATFORM), (Description: The BIP error count has crossed the threshold count w.r.t the configured threshold value.), (Recommended Action: *NONE*)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ETNA-1-ALARM_LOS_PORTU1 ### Response: (Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FSDB_FADB_MAIN-3-GET_NODE_ID_FAIL ### Response: (Severity: 3), (Category: FABRIC), (Description: FSDB FADB encountered an error while attempting to get node id in process fsdb_fadb), (Recommended Action: Search the event logs for events/errors related to the failure reason. Node ID management is part of overall system. If there are failures here then other processes may also exhibit similar problems. Collect all the event logs (show logging) and the output of the following command. 'admin show process fsdb_fadb location <loc>' Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MEDIASVR-5-DEVICE_REPAIRED ### Response: (Severity: 5), (Category: MEDIA), (Description: The media storage card specified has some inconsitencies in the filesystem and was repaired. See log file for specific reason.), (Recommended Action: Run install verify and cfs check.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ATM_OAM-2-SYSDB_ERR ### Response: (Severity: 2), (Category: L2), (Description: Error in sysdb operation. %s - Type of the error. This error happens on the LC with ATM interfaces It could be one of the following types: - Unknown parameter - Sysdb Tuple is not of proper type - Sysdb Tuple fetched is corrupt - Parameter was out of range - Invalid Configuration), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Error in the config that is being committed. Check the configuartion and change it according to the error.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIA-1-SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_1_0 ### Response: (Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_8B10B_DECODE_OUT_OF_BAND_ERROR_1 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: QAD_QUEUE_MODEL-3-ERROR ### Response: (Severity: 3), (Category: OS), (Description: The specified operation failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: LINK-4-BERTNOTRUNNING ### Response: (Severity: 4), (Category: PKT_INFRA), (Description: Trying to stop BERT when not running), (Recommended Action: None.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: OPTICS-2-SONET_XCVR_CODE ### Response: (Severity: 2), (Category: L2), (Description: The xcvr code is displayed for both supported and unsupported sfp/xfp types for the following actions - OIR of SFP/XFP - Soft and Hard OIR of SPA/LC - unshut of SPA - Enabling power for LC), (Recommended Action: No actions are required as this is just an informational message.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: INSTAGENT-6-INFO ### Response: (Severity: 6), (Category: INSTALL), (Description: This may not be a failure, but the information about the progress of the install operation.), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SSE_PFILTER_EA-3-ERR_IM_CAPS ### Response: (Severity: 3), (Category: L2), (Description: 1) An ACL could not be applied to hardware because of one of the following reasons: a) TCAM max limit has been reached. b) RLB resources are not available. c) IPv6 address compression table is full. This error can happen when a new bundle member is added and the ACL can not be programmed successfully. 2) An ACL could not be removed from hardware.), (Recommended Action: 1) When this error occurs the running-config will not be in sync with line card configuration. It is recommended that the bundle member on which the error occured be removed from the bundle. The ACL configuration may also be reduced until it can be successfully programmed on the new bundle member. 2) If the ACL could not be removed from hardware a line card reload is recommended.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: INTCTRL-3-ERR_MEM_ALLOC ### Response: (Severity: 3), (Category: PLATFORM), (Description: Interrupt controller encountered a fatal memory allocation error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: HTTP_ENA-3-SYSDB_CONN ### Response: (Severity: 3), (Category: MGBL), (Description: The HTTP Server was unable to create a connection to the SysDB component. It may be that the communication infrastructure is faulty, or that the SysDB component has not yet restarted. If the errors persist, the router may need to be restarted.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ESD-3-INV_READ_FAILURE ### Response: (Severity: 3), (Category: INFRA), (Description: Indicates that the switch's static configuration data could not be read or parsed successfully.'), (Recommended Action: Determine the board type (version/revision) to make sure that its of supported HW. Not all board types are supported by the inventory manager. If this is a supported type, then root cause has to be determined.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CE_SWITCH-6-LINK_SHUT_DOWN ### Response: (Severity: 6), (Category: PLATFORM), (Description: The intra-rack switch port was administratively shut down.), (Recommended Action: This port is being administratively shutdown. No further action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: INV-6-XFP_OIR ### Response: (Severity: 6), (Category: PLATFORM), (Description: The Optic Interface Module (XFP) for the specified port has either been inserted or removed.), (Recommended Action: This is an info message saying the XFP is inserted/removed. Please check if there is a manual intervention to remove/insert the XFP.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: XR_DIAG-3-IFD_ETHSVR_MSG_ERR ### Response: (Severity: 3), (Category: DIAG), (Description: The diagnostic software has detected an error while running Field/Offline Diagnostic (IFD) on the target node/card under test.), (Recommended Action: Collect the console error messages exactly as it appears on the console and call cisco support engineers with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FABMGR-1-PERSISTENT_SERDES_FAIL ### Response: (Severity: 1), (Category: PLATFORM), (Description: Persistent failure in serdes link.), (Recommended Action: Please try powercycling the board using command: 'hw-module loc <> reload'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: HA_WD_LIB-6-UNREG_PROC_SUCCESS ### Response: (Severity: 6), (Category: HA), (Description: Process un-registration for node memory state with wdsysmon is success.), (Recommended Action: No action required)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CPAK-2-LOW_BIAS_ALARM ### Response: (Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK bias less than or equal to the low laser bias alarm threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: RADIUSD-3-VSA_FORMAT_ERR3 ### Response: (Severity: 3), (Category: SECURITY), (Description: VSA format error in daemon user configuration.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SFE_DRVR-3-SERDES_CLOCK ### Response: (Severity: 3), (Category: FABRIC), (Description: 1. SerDes Clock Failure/Recovered. SerDes PLL Lock is lost or recovered. 2. SerDes input clock failure. This could be also result of hardware failure. Following enum defines significance of 'BMP'-SerDes LCPLL error bitmap, data. E.g. if BMP is 0x03 it means LCPLL_REFCLK0 & LCPLL_REFCLK1 is affacted. typedef enum sfe_serdes_lcpll_err_ { SDS_LCPLL_ERR_NONE = 0x0, SDS_LCPLL0_ERR = 0x01, SDS_LCPLL1_ERR = 0x02, SDS_LCPLL2_ERR = 0x04, SDS_LCPLL3_ERR = 0x08, SDS_SRD_REFCLK_Q26_ERR = 0x10, SDS_SRD_REFCLK_Q35_ERR = 0x20, SDS_LCPLL_ERR_MAX = 0xFF } sfe_serdes_lcpll_err;), (Recommended Action: PON Reset the ASIC. Collect all the event logs and the output of the following commands executed from the CLI of the active RP: 1. 'show processes sfe_driver location <loc>' 2. Collect all traces: 'show controller sfe trace all location <loc>' 3. dmesg and /var/log/messages from host and sysadmin VM If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIA-1-DATA_SERDES_0_FAIL_0 ### Response: (Severity: 1), (Category: FABRIC), (Description: Data serdes link 0 failure on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLIM-3-SFPPLUS_ACCESS_PERSIST ### Response: (Severity: 3), (Category: L2), (Description: Software could not access the optics module during initialization.), (Recommended Action: Replace the SFPPLUS.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: EGRESSQ-3-ERR_INTERNAL_ASIC ### Response: (Severity: 3), (Category: L2), (Description: Egressq ASIC reinitialization failed, this is an irrecoverable situation, and Egressq driver will be restarted.), (Recommended Action: No action is required. The process will automatically retry. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: INSTMGR-3-REQ_MSG_PROCESSING ### Response: (Severity: 3), (Category: INSTALL), (Description: An error occurred during processing of a LWM message from a client.), (Recommended Action: Please check the operation requested and retry. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CLKCTRL_FMEA-4-CLOCK_ALERT ### Response: (Severity: 4), (Category: PLATFORM), (Description: One of the internal/external clock interfaces have reported an alarm as specified in the alarm description. This does not necessarily mean any fault in the hardware. Some alarms can occur transiently during clock-events like configuration changes, network events or cabling changes. The alarms should cancel within few minutes in such cases. If the alarms persist then it may not affect routing/forwarding but timing distribution may be impacted.), (Recommended Action: Ensure cable connection between the configured interface port and external equipments is proper.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IMDR-6-CHKPT_RECORDS ### Response: (Severity: 6), (Category: OS), (Description: Status information while checkpointing.), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CFP-3-LANE_2_LOW_TEMP_WARNING ### Response: (Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: The system detected a low temperature threshold crossing which normally won't affect any service. Monitor the system to see if the condition clears. Generally no action needs to be taken for this condition and is more informational. If any service is affected, check the device is properly inserted. Replace the CFP with working one (if any). Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: What is the purpose of the Overload bit in IS-IS? ### Response: The Overload bit is a special bit that can be set in the LSP to indicate that the router should not be used as a transit router. This is useful when the router is in a transient state, such as during startup or during a software upgrade. It prevents other routers from sending transit traffic through the overloaded router.

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: TZ-3-TIMEZONE_CFGSTR_SET_ERR ### Response: (Severity: 3), (Category: OS), (Description: This indicate error when setting timezone string.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: OBFLMGR-7-NO_MEMORY ### Response: (Severity: 7), (Category: OS), (Description: Not enough memory available in the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IFSTATS-4-ERR_EVENT_WAIT ### Response: (Severity: 4), (Category: MGBL), (Description: The event loop has received a message of a type it does not recognize. All events should be received by handlers. This message is only a warning and does not represent a problem in its own right.), (Recommended Action: If the process is otherwise working OK then a one-off occurrance of this message can be ignored. If the process is experiencing other problems then include this error message in the details given to support.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ETNA-1-ALARM_LOL_DEMA ### Response: (Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: DSCMEDIA-3-TRANSPORT_FAIL ### Response: (Severity: 3), (Category: PLATFORM), (Description: DSC Media DLL has encounered the annunciated transport error. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IP_MFWD_FRETTA-7-ERR_BAG_REGISTRY ### Response: (Severity: 7), (Category: ROUTING), (Description: The MFWD-FRETTA library encountered internal error during sysdb/edm init setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIA-1-SKT_NI_INTR_CRC_ERR1_0 ### Response: (Severity: 1), (Category: FABRIC), (Description: SKT_NI_INTR_CRC_ERR1 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BCDLPROD-6-MSG_GENERIC_ERROR ### Response: (Severity: 6), (Category: OS), (Description: BCDL producer dll encountered an error.), (Recommended Action: Contact support.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: OBFLINFRA_INT-7-DEBUG_SENDV ### Response: (Severity: 7), (Category: OS), (Description: debug print before msg_sendv), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MKA-5-SESSION_START ### Response: (Severity: 5), (Category: L2), (Description: After all config dependencies are resolved MKA started session specific to each interface), (Recommended Action: No action required (normal operation).)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IOFPGA-4-NLSOCK_CREATE_FAIL ### Response: (Severity: 4), (Category: DRIVER), (Description: IOFPGA driver creates Socket on Black VLAN interface (3073) for communicating with remote cards in the Chassis. If the socket creation fails, then all Ethernet communication from Niantic fails and I2C path is used to reach remote cards.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: HFR_IPv4-4-LTRACE ### Response: (Severity: 4), (Category: IP), (Description: There was a system call failure during initialization of the ltrace logging system. Ltrace logs may not be available.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PERF_MEAS-4-DEPRECATED_CONFIG_BURST_INTERVAL ### Response: (Severity: 4), (Category: ROUTING), (Description: Burst-interval configuration is no longer available and will be removed in a subsequent release.), (Recommended Action: Use tx-interval to configure transmission interval for packets.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: umass_enum-5-INCORRECT_PARTITIONS_REPARTITION_DEVICE ### Response: (Severity: 5), (Category: PLATFORM), (Description: Some existing eUSB may have wrong FS or partitions. Check if need to reformat the eUSB. This message will get printed if there is incorrect eUSB partitions and if there a need to repartition the device.), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PIM-3-BGP_ENS_ERROR ### Response: (Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ZTP-7-DEVICE_CONFIGURED ### Response: (Severity: 7), (Category: INFRA), (Description: Device is already configured. ZTP will exit.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MACE_CLIENT-0-ERR_MEMORY_MAP ### Response: (Severity: 0), (Category: PLATFORM), (Description: An error occurred in mace driver due to memory mapping failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: NPU-3-ERR_EXIT ### Response: (Severity: 3), (Category: L2), (Description: An error occurred in NPU Driver which requires exiting (and, hence, restarting) the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: VPA_1P_OC192-6-INFO ### Response: (Severity: 6), (Category: L2), (Description: OC192VPA driver general info.), (Recommended Action: show asic-error plim asic .. loc <>)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FSYNC-3-BITS_CONFIG_NOT_SUPPORTED_IN_HARDWARE ### Response: (Severity: 3), (Category: PLATFORM), (Description: BITS-In and BITS-out ports support either of T1/J1/E1/2M/6M/64K modes. Framing modes and linecoding modes are specific to each BITS mode.), (Recommended Action: Ensure the following submodes are used with each BITS mode. T1/J1 - Framing mode - d4/esf T1/J1 - Linecoding mode - ami/b8zs E1 - Framing mode - fas/cas/crc4/cas-crc4 E1 - Linecoding mode - ami/hbd3 2M/6M/64K - No Framing or Linecoding modes supported Additional configurations to be considered for T1 bits-output T1 - linebuildout(FT)- 0_133/133_266/266_399/399_533/533_655 Additional configurations to be considered for E1 bits-input/output E1 - Sabyte for cas/crc4/cas-crc4 framing mode - sa4/sa5/sa6/sa7/sa8)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLIM_LIB-3-SYSDB_ERROR ### Response: (Severity: 3), (Category: L2), (Description: A fatal error occured during sysdb_register_notification for PLIM process. With this, config change in the syslogTXfault will not be notified to the respective PLIM process.), (Recommended Action: Collect following info: - show tech-support sysdb - show sysdb registrations notification detail shared-plane-sc)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: rspp_drop-3-INIT ### Response: (Severity: 3), (Category: SERVICES), (Description: A failure occurred when installing the capability in NetIO to process slow path packets for service diversion. If this occurred during an upgrade operation then it will cause the NetIO process to reload. Otherwise this will cause the capsulation to be unloaded,and an error will be returned to the user.), (Recommended Action: *RECUR*)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLATFORM_LPTS_PIFIB-3-CONFIG_MISSING_FLOW ### Response: (Severity: 3), (Category: OS), (Description: error in PIFIB flow handling configuration. The named flow type was not explicitly configured and will have default characteristics applied.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SYNCFS2-7-MUTEX_UNLOCK ### Response: (Severity: 7), (Category: MEDIA), (Description: A required mutex unlock failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLATFORM_ASR9K_NSR_PACKET-2-SPP_ADD_L2_HDR_FAILED ### Response: (Severity: 2), (Category: PLATFORM), (Description: This message tells is there was an error in adding the L2 header by SPP.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MCASTSN-3-NVSATOFFINIT ### Response: (Severity: 3), (Category: L2), (Description: An error occurred when initializing the nV Satellite multicast offload channel. Multicast offload will not function correctly. All dependent replications will happen on local device.), (Recommended Action: Please check if the igmp snooping profile has been attached to the bridge domain and if recommended nV satellite h/w, s/w is in use by using the following commands Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp snooping profile<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp snooping profile<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp snooping bridge-domain detail<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp snooping bridge-domain detail<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show igmp snooping port detail debug<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show igmp snooping port detail debug<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show nv satellite status<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show nv satellite status<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CPAK-3-LANE_6_LOW_BIAS_WARNING ### Response: (Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser bias less than or equal to the low laser bias warning threshold. The CPAK is the pluggable optics on the line cards. The laser bias threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CANB_SERVER-3-MESSAGE_FAILED ### Response: (Severity: 3), (Category: PLATFORM), (Description: A message was received and did not match any outstanding requests and also is not a standalone message. This is not a critical failure, the process can continue functioning as expected despite the message arrival, message is discarded.), (Recommended Action: If this appears once or infrequently, it is not necessary to contact TAC. If it appears continuously or comes and goes repeatedly, it is best to please collect the following details and contact TAC. Provide the following CLI output: (admin)# show canb server-stats loc all (admin)# show canb trace loc <target nodeid> (admin)# debug canb server error loc <target nodeid> Let the debug run 2 minutes (admin)# undebug canb server error loc <target nodeid> (admin)# show canb trace loc <target nodeid> (admin)# show canb server-stats loc all)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: QSFP_PLUS-3-LANE_3_HIGH_BIAS_WARNING ### Response: (Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser bias greater than or equal to the high laser bias warning threshold. The QSFP+ is the pluggable optics on the line cards. The laser bias threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: vlma-6-NO_MEM ### Response: (Severity: 6), (Category: L2), (Description: The VLAN MA process was not able to allocate the memory that it needed to complete the operation. VLAN functionality on the affected node may be reduced until the problem is resolved.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MKA-5-FALLBACK_PSK_PEER_NOT_FOUND ### Response: (Severity: 5), (Category: L2), (Description: Connectivty Association(CA) runnning with fallback PSK, has not received a MKPDU from it's MACsec peer for at least 6 seconds.), (Recommended Action: Check connection to peer and if peer is still up and responding, make sure not to have any config conflicts(key, key-string, lifetime) across the MACsec peers, configure valid primary & fallback PSK's in the keychain repository.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: INSTMGR-6-INSTALL_OPERATION_STARTED ### Response: (Severity: 6), (Category: INSTALL), (Description: An install operation has been started - another message will be displayed when it is finished.), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: STREE-4-START_FAIL ### Response: (Severity: 4), (Category: L2), (Description: Spanning tree could not be started on the control ethernet for the node. stp_process error messages are indicative of health of control-ethernet which is critical for system operation. Misbehavior of stp_process can cause instability in the system.), (Recommended Action: Sysmgr process will restart the stp_process if it encounters this error. Check if the 'stp_process' is up and running if this error is encountered. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: OFA_PLUGIN-4-GEN_RC_WARNING ### Response: (Severity: 4), (Category: L2), (Description: Request ONEP failed. It may caused by ONEP configuration lost or ONEP process failed.), (Recommended Action: Check ONEP configuration and process.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ISIS-5-NSR_PM_ROLE_CHG ### Response: (Severity: 5), (Category: ROUTING), (Description: ISIS is notified by PM on HA or ISSU roles.), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BRIDGE-2-NPU_1_FC_OOS_3 ### Response: (Severity: 2), (Category: PLATFORM), (Description: Egress flow control out-of-sync on NPU-1 interface on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PKG-7-CANT_CD ### Response: (Severity: 7), (Category: INSTALL), (Description: Either the file system is in error, or the infrastructure is behaving incorrectly. The Package infrastructure could not change to a required directory, so processing of the current operation will halt.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ELMI-4-PROTOCOL_GENERIC ### Response: (Severity: 4), (Category: L2), (Description: The entire PDU, or one or more IEs in the PDU, were ignored due to the given error. This indicates that the last PDU sent by the peer device was not formatted correctly.), (Recommended Action: Check that E-LMI is configured on the peer device and that the link to the peer device is functionining correctly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FPD_SERVER-3-UPGRADE_ERROR ### Response: (Severity: 3), (Category: INFRA), (Description: Update FPD upgrade ERROR), (Recommended Action: Customer immediately knows the reason of failure.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SPA_CHOPPER-3-EVET_MGR_ERR ### Response: (Severity: 3), (Category: L2), (Description: This message indicates that SPA process was unable to create event manager. The process will automatically respawn up to a fixed number of times to try and recover.), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: INSTMGR-4-ABORTING_FORCE_RELOAD_NODE ### Response: (Severity: 4), (Category: INSTALL), (Description: Reload the node while aborting LOAD phase of install issu operation.), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MPLS_TE-5-SRLG_ANNOUNCE_ON_TERM_INTF_FAILED ### Response: (Severity: 5), (Category: ROUTING), (Description: This is to notify that SRLG announcement for term intf has failed for a tunnel.), (Recommended Action: None. This is a solicited message and is informative only.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BRIDGE-1-XAUI_1_CHAR_ALIGN_2 ### Response: (Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-1 char alignment error on bridge instance-2.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: VKG_BCM8705-3-ERROR_EXIT ### Response: (Severity: 3), (Category: PLATFORM), (Description: The Ether-Ctrl process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process ether-ctrl location <>' to verify that the process is up and running. If it is still non-operational, try doing from the admin mode 'process restart envmon location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CT_DSP-1-ALARM_TX_AHS_LOS_LANE0 ### Response: (Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MFWD_MA-3-ERR_EVM_CONN_CREATE ### Response: (Severity: 3), (Category: ROUTING), (Description: A general error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PKI-6-ERR_2SD_PARAM ### Response: (Severity: 6), (Category: SECURITY), (Description: CEPKI general error message with three parameters.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: REBOOT_LIB-4-NODE_NOT_PRESENT ### Response: (Severity: 4), (Category: INFRA), (Description: Node to be reloaded is not present in the inventory.), (Recommended Action: Collect system log information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CGN-3-EDM_INITFAIL ### Response: (Severity: 3), (Category: SERVICES), (Description: A failure occurred during the initialization EDM of the CGN process on a particular node. The errors were seen during event connection operation. The process will be restarted.), (Recommended Action: Try restarting the CGN process showing this error. Please contact support if the issue does not get resolved after process restart.)