text
stringlengths
307
3.4k
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: I2C-2-CRS_X_FABRIC_VOLTAGE_SUPPLY_FAILED ### Response: (Severity: 2), (Category: PLATFORM), (Description: As soon as power is asserted on fabric card, s/w will read power good reister for crs-x fabric cards. If power good register bots are low, it indicates that the crs-x fabric card is not having a good power and the i2c power ON is possibly failed.), (Recommended Action: Please collect required_info log/traces and try to recover by reloading the fabric card. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: QAD_SERVER-3-SYSMGR_ERROR ### Response: (Severity: 3), (Category: OS), (Description: Sysmgr proc ready operation failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: DPFPGA-6-FIFO_BUFFER_WARNING ### Response: (Severity: 6), (Category: PLATFORM), (Description: DPFPGA FIFO for the corresponding port is in stuck state), (Recommended Action: Relaod the node to reuse the port)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BCDL-3-MSG_DLL_OPEN ### Response: (Severity: 3), (Category: OS), (Description: The interface library is not availble.), (Recommended Action: Contact support.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ISIS-3-ERR_TAG_NAME ### Response: (Severity: 3), (Category: ROUTING), (Description: An IS-IS process failed to retrieve its process tag name during process initialization. This is a fatal software error and the IS-IS process will abort.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: APPMGR-3-RELAY_RECOVERY_FAILED ### Response: (Severity: 3), (Category: INFRA), (Description: The IOS-XR appmgr was unable to recover an relay belonging to the specified application after a reload or switchover event.), (Recommended Action: Inspect the error information and reactivate the application after addressing any issues. The error information can be displayed through the following command: <CmdBold>show appmgr application name <name> info detail<noCmdBold>. This will occur if the underlying rpm install operation fails. Typically this is the result of user errors caused by specifying an invalid RPM file or attempting to install package that already exists.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: HA_WD-3-MSG_GET_CHAN_CHAN ### Response: (Severity: 3), (Category: HA), (Description: An internal error was detected when trying to get channel id from a channel handler.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ATTACH-3-CNET_FAIL ### Response: (Severity: 3), (Category: PLATFORM), (Description: open_cnet failed. %s- Failed reason. %x- Return value.), (Recommended Action: *SUPPORT*)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BFD-6-SESSION_BUNDLE_ALL_MEMBER_OFF ### Response: (Severity: 6), (Category: L2), (Description: The specified BFD session is not running in all member mode.), (Recommended Action: No action is required.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SRG-3-MGR_INIT_FAIL ### Response: (Severity: 3), (Category: SUBSCRIBER), (Description: An error occurred during initialization, causing SRG Manager process to abort and it will be restarted to attempt to resolve the issue.), (Recommended Action: Contact Technical Support. No impact on ongoing feature operations, but if happens repeatedly then Subscriber Redundancy related configuration cannot be updated.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: TYPE6-6-MK_OPERATION_TIMEOUT ### Response: (Severity: 6), (Category: SECURITY), (Description: It show the Masterkey operation (create/update/delete) was started on system but it is not finished yet. Please run 'show type6 client' to check which type6 clients has not finished the operation.), (Recommended Action: Check the status of all type6 clients with 'show type6 clients'.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BGP-3-BPM_SWITCH_MODE ### Response: (Severity: 3), (Category: ROUTING), (Description: An error occurred when switching between standalone and distributed mode.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: LICMGR-6-LOAD_LICENSE_FILE ### Response: (Severity: 6), (Category: LICENSE), (Description: The license manager is about to open the named license file to add licenses to the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: REDDRV-5-GO_STANDBY ### Response: (Severity: 5), (Category: PLATFORM), (Description: Card is becoming standby.), (Recommended Action: No action required, just informational message.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLAT_CLIENT-2-UPGRADE_LICENSE_NOT_AUTHORIZED ### Response: (Severity: 2), (Category: LICENSE), (Description: The authorization code installed does not contain the requested entitlement tag The authorization code installed does not contain enough counts to satisfy the request. Software upgrades will be blocked once the upgrade grace period of 90 days expires. Please check show license platform summary/detail for more information.), (Recommended Action: Generate a new authorization with all licenses required from the virtual account and install that on the router.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: DPA_FM-3-MATCH_TYPE_IN_ACL_NOT_SUPPORTED_DIR ### Response: (Severity: 3), (Category: PKT_INFRA), (Description: The match criteria specified is not supported in an ACL for this type/direction of ACL.), (Recommended Action: Remove the match criteria from the ACL and re-apply.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MPLS_LSD-3-MULTI_IP_FPI_RW ### Response: (Severity: 3), (Category: ROUTING), (Description: Rewrite creation or modification failed due to presence of multiple IP route elements.), (Recommended Action: Collect LSD traces)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: NVGEN-3-ERR_THREAD_COND_WAIT ### Response: (Severity: 3), (Category: MGBL), (Description: 'The call to wait on a condition failed. The error is displayed in the message'), (Recommended Action: *SH_TECH*)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BRIDGE-1-SOFT_ERROR_ALERT_1 ### Response: (Severity: 1), (Category: PLATFORM), (Description: Soft error detected on Bridge FGPA instance 1.), (Recommended Action: Please reload the board in the next maintenance window. Until then affected ports will be down. 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: NP-4-COLD_RESET_FAILED ### Response: (Severity: 4), (Category: PLATFORM), (Description: This is an error message in the NP Driver to indicate that it failed to perform cold reset of specified NP instance due to the specified reason.), (Recommended Action: No action is required.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLDMGR-2-CLIENT_ERROR ### Response: (Severity: 2), (Category: PLATFORM), (Description: PLDMGR client reports a catastrophic error with error id.), (Recommended Action: All the necessary information is stored in PCDS. We can dump PCDS information using pcds_decode command from the shell.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CFP-3-HIGH_TEMP_WARNING ### Response: (Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP temperature greater than or equal to the high temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans')
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: netio_debug-4-ASYNC_HANDLER ### Response: (Severity: 4), (Category: PKT_INFRA), (Description: The NetIO debugging partner process couldn't install the default event handler for async messages.), (Recommended Action: NetIO debugging partner process is only needed to capture/log packet info and for debugging purpose only and does not effect system functionality. No actions are needed.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: VERSMGR_LIB-7-SYSDB_REGISTER ### Response: (Severity: 7), (Category: INSTALL), (Description: A Version Manager library was unable to register with SysDB, so will not be able to function. Installations will be unlikely to produce the expected results.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: INSTMGR-3-SYS_UPGRADE_FAILURE ### Response: (Severity: 3), (Category: INSTALL), (Description: Specified install operation in the error message failed. This message will be sent by the Admin install manager with proper reason for the failure.), (Recommended Action: The reason for this install operation failure has to be analyzed. Check the install operation log by 'show install log <id>' id is same as displayed in the syslog message which will be helpful to understand the reason for the install operation failure. Collect the show tech logs by running 'show tech-support install' and forward the logs to the TAC. Collect the install operation logs by running 'show tech-support install' on admin as well. Provide the details about any relevant system events/operations before this failure.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MDACON-4-BADOPTION ### Response: (Severity: 4), (Category: MGBL), (Description: The command option is invalid), (Recommended Action: Re-enter the command. (Use the help command to find valid options.) If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIA-1-SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_5_0 ### Response: (Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_5 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CCTL-6-TEMP_ALARM ### Response: (Severity: 6), (Category: PLATFORM), (Description: Informational msg indicating temperature at which alarm occured.), (Recommended Action: Temprature sensor value crossed the threshold mentioned in the message.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: COREHELPER-3-BLOCK_EVENT_ERROR ### Response: (Severity: 3), (Category: OS), (Description: Received specified error from event_block API.), (Recommended Action: Check corehelper process, collect console logs, show context. Report this message to TAC.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: How to monitor MPLS L3VPN VRF BGP session state? ### Response: To monitor MPLS L3VPN VRF BGP session state, use the 'show bgp vpnv4 unicast vrf MyVRF summary' command. show bgp vpnv4 unicast vrf MyVRF summary
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: VS_CLIENT-3-NOTIFICATION ### Response: (Severity: 3), (Category: INSTALL), (Description: Test code only - will never be seen by customers.), (Recommended Action: --)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: INSTMGR_LIB-2-RELOAD_SAVE_CONFIG_FAILED ### Response: (Severity: 2), (Category: INSTALL), (Description: Configuration will be lost during the reload of the installation if both of the following apply 1. Binary configurations are not compatible between the current software and the software that runs after the reload 2. Some parts of the running configuration have not been committed to configuration manager's hidden ASCII config file.), (Recommended Action: After the installation check that the router's configuration is complete. Reconfigure if necessary.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PPP_MA-4-ERR_AAA_SESSION ### Response: (Severity: 4), (Category: L2), (Description: PPP MA encountered an error using the AAA iEDGE service. The error message describes what operation has failed and why it failed. The most likely reason for this is that the AAA iEDGE server is unavailable. It may also be caused by low memory resource or a programming error.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. In many cases, PPP MA will recover by itself. If it does not then restarting the process should help. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IFMGR-6-LWM_UNEXPECTED_PULSE ### Response: (Severity: 6), (Category: PKT_INFRA), (Description: This error message indicates that a pulse has been delivered to the event manager in the IM client library which was intended for someone else. This is almost certainly harmless in this case since IM has detected and ignored the event.), (Recommended Action: No action is required.)