text
stringlengths
307
3.4k
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IOR-4-LTRACE_INIT ### Response: (Severity: 4), (Category: INSTALL), (Description: Failed to register ltrace context structure. Tracing will not be functioning properly.), (Recommended Action: This indicates that the ltrace infrastructure could not be initialised. It only impacts ltrace message logging and has no impact on the functionality of the system.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: XCVR-6-REMOVAL ### Response: (Severity: 6), (Category: PLATFORM), (Description: This is an informational message which notifies that XCVR is removed from particular location %s - xcvr type), (Recommended Action: *NNOE*)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BRIDGE-3-CHKSUM_ERR_0_FIA_1 ### Response: (Severity: 3), (Category: PLATFORM), (Description: Checksum error - 0 from FIA on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ETH_SRVR-3-NOT_SUPPORTED_CARD_TYPE ### Response: (Severity: 3), (Category: PLATFORM), (Description: This card is a line card that does not have a switch. Hence switch statistics cannot be cleared.), (Recommended Action: No action is required)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: RCMD-6-SERVER_INIT ### Response: (Severity: 6), (Category: ROUTING), (Description: Provides indication that the RCMD feature has been enabled and monitoring is starting), (Recommended Action: No action required. If this message appears repeatedly then it indicates that RCMD is restarting possibly due to some error. For restart, previous generated reports which are not archived will be lost and this needs to be reported to Technical Support.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: DOMAIN_SERVICES-3-ATTACH_HANDLER ### Response: (Severity: 3), (Category: IP), (Description: The domain_services process failed to attach an event handler to receive event messages sent to it. The error is normally seen during initialization of DNS process (i.e. domain_services) or while trying to fetch hostname or address through DNS query. Such errors should go away with process restart), (Recommended Action: Please note down the stage at which this error message is seen i.e during boot or later stages.Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CARD_MGR-6-CTRL_ETHER_OIR_REMOVE_EVENT ### Response: (Severity: 6), (Category: DRIVER), (Description: card_mgr has detected eobc remove oir event for qsfp/sfp interface), (Recommended Action: No action is required.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: DOMAIN_SYNC-3-RUNTIME_FAILURE ### Response: (Severity: 3), (Category: OS), (Description: Error during event loop for domain_sync daemon), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SMC-7-RESTARTING ### Response: (Severity: 7), (Category: SYSDB), (Description: The SysDB server is unable to function due to a problem with one of its modules. The only hope of recovery is to restart. If the problem persists, the card will be automatically reloaded.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CFP-3-LANE_12_HIGH_BIAS_WARNING ### Response: (Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SRP-3-ERR_SRR_VER_MISMATCH ### Response: (Severity: 3), (Category: L2), (Description: SRR has detected incompatible versions with other nodes on the ring and cannot inter-operate.), (Recommended Action: Update the software image on all nodes of the ring to the same SRR version.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: What is the significance of the 'install commit' command in Cisco IOS XR? ### Response: The 'install commit' command in Cisco IOS XR makes the added software packages permanent, ensuring they remain active across system reboots.
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ENVMON-3-FAN_TRAY_FAILED ### Response: (Severity: 3), (Category: PLATFORM), (Description: Fan tray is failed due to i2c hung even after all possible recovery action.), (Recommended Action: This condition indicates a potential hardware problem with the fan tray.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLATFORM-3-CM_MODULE_INIT ### Response: (Severity: 3), (Category: TOPOLOGY), (Description: Could not connect to event connection manager.), (Recommended Action: No action is required.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MPLS_TE-5-AUTOBW_REACH_MIN_LIMIT ### Response: (Severity: 5), (Category: ROUTING), (Description: This auto-bandwidth tunnel has a minimum bandwidth request. It is trying to allocate less bandwidth than that limit. TE will limit the bandwidth request to its minimum value.), (Recommended Action: None. This is a solicited message and is informative only.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BFM-3-POOL_CONFIG_FAILED ### Response: (Severity: 3), (Category: PKT_INFRA), (Description: BFM encountered pool state error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: APIV-3-LTRACE_DISPLAY_FAIL ### Response: (Severity: 3), (Category: PLATFORM), (Description: The message indicates failure in initializing the tracing module.), (Recommended Action: Please provide the output from the following commands on the node where the problem occurred, if contacting TAC: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>cmd<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>cmd<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. - show logging - show ipcp sap all location <ISM> - show ipcp trace reverse location <ISM> - show controllers service-module apiv sep summary loc <ISM> - show controllers service-module apiv lcp summary loc <ISM> - show controllers service-module ipcp channel loc <ISM>)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PPPOE_GBL_CFG-4-ERR_DBG_TRACE ### Response: (Severity: 4), (Category: SUBSCRIBER), (Description: PPPoE MA encountered an error initializing its Debug and Trace The error message describes what operation has failed and why it failed. This is a fatal error and the PPPoE GBL process cannot continue. It will abort and subsequently be restarted by SysMgr in an attempt to recover.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: security_efivars-3-INIT ### Response: (Severity: 3), (Category: MGBL), (Description: A failure occurred during the initialization of the process. This may have resulted in the restart of the process.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ACE_LC-0-ACE_SYSLOG_EMERG ### Response: (Severity: 0), (Category: SECURITY), (Description: ACE SPA SYSLOG message), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLACED-3-BAD_MESSAGE ### Response: (Severity: 3), (Category: OS), (Description: PlaceD received an unexpected message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLAT_DISC-3-PARTICLE_MEDIUM_POOL_DEFINE_FAIL ### Response: (Severity: 3), (Category: PLATFORM), (Description: Define particle pools over memory regions. If there is not enough space to hold all the particles, less particles will be created. Each pool can have its own particle size. Particle defined as Medium pool got failed.), (Recommended Action: Copy the System Message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SCONBKUP-3-INTERNAL_FATAL ### Response: (Severity: 3), (Category: MGBL), (Description: Restarting the process as it is not in a recoverable state.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: QSFP_PLUS-2-DEV_QSFP_COMPLIANCE_ERROR ### Response: (Severity: 2), (Category: PLATFORM), (Description: A compliance error was detected during QSFP+ initialization. A compliance error is due to unsupported optics, checksum error, EEPROM CRC error, vendor data error, or decryption error. The QSFP+ is the pluggable optics on the line cards. QSFP+ initialization may happen when linecard boots up, QSFP+ OIR and line card process restart. The optics will not be enabled if an QSFP+ compliance error is detected.), (Recommended Action: Verify that the device is properly inserted. Check optic supportedness from the Cisco CCO document 'Cisco ASR 9000 Transceiver Modules: Line Card Support'. Also, check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. Replace the QSFP+ with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: GROUP_MEMBERSHIP-4-MARTIAN_SOURCE ### Response: (Severity: 4), (Category: ROUTING), (Description: Information related to Martian source reaching IGMP.), (Recommended Action: No action required.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ETHERNET_LOOPBACK-3-ERROR_INIT ### Response: (Severity: 3), (Category: PLATFORM), (Description: Failed to initialize error messaages in the platform Ethernet loopback component), (Recommended Action: No action is required.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BRIDGE-1-NPU_0_XAUI_PLL_LOCK_2 ### Response: (Severity: 1), (Category: PLATFORM), (Description: NPU-0 XAUI PLL not locked on bridge instance-2.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SHELFMGRV2-4-CARD_POST_TRIGGER ### Response: (Severity: 4), (Category: PLATFORM), (Description: The card is reloaded due to a faulty HW/ASIC. The IFD image will be loaded and diagnostic tests on the falling device will be performed. The card will then be reloaded with XR image if nothing wrong in the device; otherwise it will be placed IN-RESET mode.), (Recommended Action: No action is required.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: T1E1_LNM-3-GENEVENT ### Response: (Severity: 3), (Category: L2), (Description: An error has occurred in the link noise monitoring.), (Recommended Action: Copy the error message exactly as it appears and report it to your technical support representative.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SHELFMGR-0-MAX_BOOTREQ_BRINGDOWN ### Response: (Severity: 0), (Category: PLATFORM), (Description: This message is generated when the node has failed to boot up repeatedly and indicated to the shelfmgr that the node reset itself each time. Therefore shelfmgr eventually holds the node IN_RESET state until a manual reboot request is issued against it by the user. The probable cause is an unexpected error on the node leading to the repeated boot failures.), (Recommended Action: 1- Please start out by inspecting the active RSP console logs and determine if there is repeated process crashes or any PFM errors reported from the node or if there is any timeout errors declared by the shelfmgr against the node. 2- If no such indication is seen in the RSP logs, then the next step is to inspect the affected node's console output itself to see if there is any errors leading to node resets are reported on it. 3- If the above actions identify the root cause, please note it, collect the following information and provide this data to your Cisco technical representative. 4- Data to collect: - The full console output of both RSPs and the node console output if available. - The attachCon output for the IN_RESET node, when it was rebooted in step 3. - #show logging - #show tech-support shelfmgr - #show reboot history location <affected location> - #show pfm location <affected location> - #show reboot pcds location <affected location> 5- If the root cause was not identified in above steps, the next step is to reboot the node IN_RESET and see if an error that identifies the root cause occurs and if the node can recover from the problem. It is important to have the LC console data connected at this point. If this is not feasible, then please issue the 'attachCon <affected location>' from the RSP Aux terminal immediately after rebooting the node: - #hw-module location <affected location> from the RSP console - #attachCon <affected location> from the RSP Aux terminal 6- Please contact your Cisco technical representative and provide the collected information to them. Please include the node console/attachCon output collected.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: QSM-7-NOTIFY_REGISTER_FAILED ### Response: (Severity: 7), (Category: OS), (Description: A application requested database notification could not be placed in the QSM notification database. An error will be returned to the client process.), (Recommended Action: Debug message only. No action is required.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIB-2-ROUTE_PROG_FAILED ### Response: (Severity: 2), (Category: ROUTING), (Description: HW resources in OOR or failed to prog route, we need to reload the LC for failed prefixes to work. There is no re-try.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BRIDGE-2-DEC_A_PKT_LEN_ERR_0 ### Response: (Severity: 2), (Category: PLATFORM), (Description: Packet with invalid length encountered by decoder A on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IPV4_MFWD_HFR-7-ERR_BAG_REGISTRY ### Response: (Severity: 7), (Category: ROUTING), (Description: The MFWD-HFR library encountered internal error during sysdb/edm init setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: LS_PRM-3-REGISTRATION_ERR ### Response: (Severity: 3), (Category: PLATFORM), (Description: The specified error happened during registering with the primitive resource manager.), (Recommended Action: Please collect output of the following commands: show platform show log show process blocked location <>)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MPLS_TE_SLSP-4-SHOW_WARNING ### Response: (Severity: 4), (Category: ROUTING), (Description: The show thread could not acquire the mutex to service the show request. The main thread in te_control may be busy/blocked/hogging while holding That mutex.), (Recommended Action: Try to run the show command again. If the error reoccurs, then check the state of the te_control process (show process te_control). If thread number 1 is blocked for an extended period of time, contact your technical service representative.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MACLEARN-3-INIT_FAIL ### Response: (Severity: 3), (Category: PLATFORM), (Description: Failed to intialize maclearn ltrace/debugs/cci APIs.), (Recommended Action: No action is required. Process will be automatically restarted. If not recovered, it is a fatal condition If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SFP-3-LOW_TX_POWER_WARNING ### Response: (Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected an SFP Tx power less than or equal to the low Tx power warning threshold. The SFP is the pluggable optics on the line cards. The Tx power threshold values are read from the SFP.), (Recommended Action: Verify that the device is properly inserted. Replace the SFP with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PFC_WATCHDOG-5-GLOBALPAUSE ### Response: (Severity: 5), (Category: PLATFORM), (Description: PFC enabled interface receiving unexpected Global pause frames), (Recommended Action: Check why the PFC enabled interface is receiving unexpected global pause frames)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SLA-4-UNEXPECTED_PROTOCOL_DATA ### Response: (Severity: 4), (Category: INFRA), (Description: An error has been detected in the information passed to the SLA infrastructure by the protocol process. This could cause missing SLA results or other unexpected behaviour.), (Recommended Action: If unexpected behaviour is seen, it may be possible to recover by restarting the protocol process on the affected node.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FSDB_AGG-3-CM_INIT_FAILURE ### Response: (Severity: 3), (Category: FABRIC), (Description: FSDB aggregator failed CM initialization with above reson.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: LIBPARSER-7-ERR_SYSDB_UNREG_NOTIFY ### Response: (Severity: 7), (Category: MGBL), (Description: 'The sysdb operation failed. Error test is displayed in the message'), (Recommended Action: *SH_TECH*)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CFM_PD-2-ICC_MAID_EXCEEDS_MAX_SUPPORTED ### Response: (Severity: 2), (Category: L2), (Description: CFM-PD found that configured ICC MAID exceeds maximum supported. HW supports maximum 15 ICC Based MAIDs.), (Recommended Action: please check if configured ICC MAIDs are more than 15 entries and remove the exceeding ICC MAID configuration.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SPM-3-ERROR_CHANNEL_CONNECT ### Response: (Severity: 3), (Category: SECURITY), (Description: The system could not connect to a channel.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FSYNC-4-MIB_DLL_ERROR ### Response: (Severity: 4), (Category: L2), (Description: An error was encountered in the Frequency Synchronization MIB DLL. Some functionality of the Frequency Synchronization DLL may be impaired. The error message contains details about the source of the error.), (Recommended Action: It is unlikely that this condition will recover automatically, restarting the SNMP agent process may be required. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IP_TUNNEL-3-EA_NOMEM ### Response: (Severity: 3), (Category: FORWARDING), (Description: The Tunnel-IP EA process could not allocate memory needed to update tunnel interface.), (Recommended Action: Check the box for processes with excessive memory in the location as seen in error message.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLATFORM_LPTS_PIFIB-3-CONFIG_FLOW_MEMORY ### Response: (Severity: 3), (Category: OS), (Description: There is insufficient memory for the flow configuration. All flows will be assigned default characteristics.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ESD-2-EOBC_LINK_DOWN ### Response: (Severity: 2), (Category: INFRA), (Description: When the Ethernet Switch Driver (ESD) process ascertains that EOBC link between CPU and control ethernet switch has not come up in pre defined time frame, it initiates reset recovery operation. This involves requesting reload of the said card.), (Recommended Action: No action further action is needed. However, the recommended action for the originally reported switch error should be followed.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: DUMPER-4-SIGNALCORE_INFO ### Response: (Severity: 4), (Category: OS), (Description: Debug core info), (Recommended Action: Information of the crashed process. Ignore.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FSYNC-3-LICENSE_INIT_FAILED ### Response: (Severity: 3), (Category: PLATFORM), (Description: ASR9K Mobile license is required for syncE/PTP features to work correctly. The licence check failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FGID_LIB-7-ERR_DEBUG_INIT ### Response: (Severity: 7), (Category: FABRIC), (Description: The FGID library failed to initialize debug. The FGID component and the system should still function as normal, with the exception that the debugs will not be available for FGID library.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SYSMGR-1-ALERT ### Response: (Severity: 1), (Category: OS), (Description: Action must be taken immediately. Possible resource shortage or coding error.), (Recommended Action: Contact support.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SSHD_SYSLOG_PRX-3-ERR_SYSDB_SET ### Response: (Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: TCP-3-EAOPT_RECV_UNSUPPORTED_MAC ### Response: (Severity: 3), (Category: IP), (Description: Received a TCP packet with the Enhanced Authentication option header with a MAC(Message Authentication Code) algorithm value not supported, from the specified peer.), (Recommended Action: Check the configuration of the peer specified and reconfigure it so that its keychain only has cryptographic algorithms supported by IOS-XR.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FSDB-3-ERR_INTERNAL ### Response: (Severity: 3), (Category: FABRIC), (Description: An internal error occurred that was expected to succeed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SHELFMGRV2-3-NODE_BREQ_TIMEOUT_RESET ### Response: (Severity: 3), (Category: PLATFORM), (Description: This message indicates that the card is being reset because of a failure to get valid boot request from a specific node.), (Recommended Action: If the problem persist, remove and re-insert the affected card to recover from this failure. If the target node is an RP or DRP, access the console to verify the setting of ROMMON confreg value, make sure that is not set to 0x0.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BRIDGE-3-FIA2NPU_0_PKT_MINLEN_ERR_0 ### Response: (Severity: 3), (Category: PLATFORM), (Description: Packet minimum length error on FIA to NPU-0 interface on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CFP-2-LANE_14_HIGH_BIAS_ALARM ### Response: (Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SPIO_PD-3-FAB_THREAD ### Response: (Severity: 3), (Category: PLATFORM), (Description: New thread creation to connect to Fabric server failed. Packet path initialization at RP errored.), (Recommended Action: Restart the spio_ma process. 'process restart spio_ma location <>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: VKG_PM-3-INTERFACE_ERR ### Response: (Severity: 3), (Category: PLATFORM), (Description: The error occurs due to failure in creating the interface.), (Recommended Action: No action is required as the software should be able to recover from this error. Please collect 'show log location <r/s/i>' output, and 'show memory summary location <r/s/i> from that location.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLACED-3-ADR_INIT ### Response: (Severity: 3), (Category: OS), (Description: Unable to initialize atomic descriptor ring.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FINT_N2N_NETIO-3-SET_MAPPING_FAILED ### Response: (Severity: 3), (Category: PKT_INFRA), (Description: FINT n2n protocol dll could not set certain internal protocol mapping. This should not affect the functionality of any other protocol traffic, but might affect n2n protocol traffic only.), (Recommended Action: Try restarting the netio process. This could sometimes help fix the problem as the set mapping will be trigged again and we might not hit the failure the 2nd time. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ZL-3-ERR_MEM_ALLOC ### Response: (Severity: 3), (Category: PLATFORM), (Description: Zarlink driver encountered a fatal memory allocation error), (Recommended Action: Check how much memory is available at the location where the error was reported. If the system has enough memory and if the error message persists, contact TAC with required_info.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: LAMPTEST-6-REJECTED ### Response: (Severity: 6), (Category: PLATFORM), (Description: Lamp Test cannot be executed because another lamp test operation is already in progress.), (Recommended Action: No action is required.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FLOWTRAP-4-BAD_ACTOR_MAC_DISABLED ### Response: (Severity: 4), (Category: OS), (Description: The punt flow trap sampler detected an excessive flow from a source MAC address. This could result in a denial of service to other interfaces. Penalty-policing has been disabled by configuration so the interface will not be placed in the 'penalty box.'), (Recommended Action: No action necessary. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IP_ARM-6-RTRID_CFG_DEPRECATED ### Response: (Severity: 6), (Category: IP), (Description: The rouer id configuration CLI has been deprecated. This command has taken on effect.), (Recommended Action: None. This is an informational message to tell user that router id configure CLI has been deprecated.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: L2VPN-6-MAC_LIMIT_BD_CLEAR ### Response: (Severity: 6), (Category: L2), (Description: Number of MAC addresses in the attachment circuit has gone below the threshold of the configured maximum. If MAC learning or/and unicast flooding was disabled on the bridge-domain due to MAC limit action, then it would get re-enabled automatically.), (Recommended Action: No particular action is required.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLAT_L2FIB_BRIDGING-7-INVALID_SET_MAC_OFFSET_ERROR ### Response: (Severity: 7), (Category: PLATFORM), (Description: Received an invalid MAC offset while setting mac bitlist datastructure), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CFM-6-TOO_MANY_TLVS ### Response: (Severity: 6), (Category: L2), (Description: While processing a received CFM PDU, more than the supported number (32) of TLVs were found. This is very unlikely to occur in normal operation, and may therefore indicate a denial-of-service attack.), (Recommended Action: Use CFM debugging ('debug ethernet cfm packets') to determine from where the problematic packets are originating. If the packets are from a trusted source and are expected, modify the configuration on that host to reduce the number of organisation-specific or otherwise unknown TLVs contained in the packet (ie TLVs not defined in the CFM standard, IEEE 802.1ag).)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: RADIUSD-3-PARAMETER ### Response: (Severity: 3), (Category: SECURITY), (Description: RADIUS was passed an invalid parameter.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PPP_MA-6-ERR_EVM_EVENT_BLOCK ### Response: (Severity: 6), (Category: L2), (Description: This is an unexpected error. The PPP MA process may recover by itself, or it may need to be restarted to recover.), (Recommended Action: Restart the affected PPP MA process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FAB_SVR_TOPAZ-7-ERR_ASIC_INIT ### Response: (Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while initializing the CPU control ASIC to either receive packets from the fabricq ASIC or transmit packets from the ingressq ASIC. This is crucial for the process and is automatically restarted on this failure.), (Recommended Action: If problem either persists (following a process restart) then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: HFR_IPV4_MRIB-3-FGID_MARK_FAIL ### Response: (Severity: 3), (Category: ROUTING), (Description: Failed during remarking the FGIDs. The error can occur during: - remarking of FGID array - performing FGID mark done.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BRIDGE-1-NPU_0_EGR_Q_ERR_1 ### Response: (Severity: 1), (Category: PLATFORM), (Description: Egress queue error on NPU-0 interface on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: RIB-3-NSF_WARN ### Response: (Severity: 3), (Category: ROUTING), (Description: Unexpected resource error during NSF initialization. This may result in NSF failures.), (Recommended Action: Free some resources and restart RIB *SUPPORT*)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IMUX-1-RX_MTA_FRM_SYN_ERR ### Response: (Severity: 1), (Category: PLATFORM), (Description: Ingress MUX encountered Rx serdes lane metaframe sync error.), (Recommended Action: This fault would result in traffic loss. Ensure the ingress MUX FPGA version is latest. Reload the card if the fault is persistent. Contact support if reload of card does not clear the fault. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: QSFP_PLUS-2-LANE_3_HIGH_TEMP_ALARM ### Response: (Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser temperature greater than or equal to the high temperature alarm threshold. The QSFP+ is the pluggable optics on the line cards. The temperature threshold values are read from the QSFP+.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BGP-3-RD_LOCK_RECURSIVE ### Response: (Severity: 3), (Category: ROUTING), (Description: A software error has occurred whilst trying to lock a network entry in the BGP Table database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CFP-2-LANE_15_HIGH_TEMP_ALARM ### Response: (Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature alarm threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: NVGEN-3-SLOTORDERINIT ### Response: (Severity: 3), (Category: MGBL), (Description: 'The call to initialize slot order failed. The error is displayed in the message'), (Recommended Action: Collect show nvgen trace, show logging and send this to tech support.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: VFW-4-FWC_FW_APP_BAD_VERSION ### Response: (Severity: 4), (Category: SECURITY), (Description: The Firewall Controller received a message from the Firewall Application with an unexpected version. This could indicate a mismatch in software versions between IOS-XR and the Firewall Application as a result of a software upgrade.), (Recommended Action: Ensure that compatible versions of the IOS-XR and Firewall Application software are installed. The problem may be cleared by rolling back any recent software install operations.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: What is the difference between a reboot package and a restart package in IOS XR? ### Response: A reboot package requires a router reload for the changes to take effect, while a restart package allows the activation of the package by restarting only the processes that have changed, without requiring a full router reload.
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: INTF_EA-3-ERROR_INIT ### Response: (Severity: 3), (Category: PLATFORM), (Description: Interface EA encountered an initialization error A reason text will be supplied to describe the error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PMIPV6-3-MISSING_MN_IDENTIFIER_OPTION ### Response: (Severity: 3), (Category: IP), (Description: The NAI option is missing in the PBU.), (Recommended Action: If the issue is seen repeatedly, do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: How do you configure OSPF area parameters in Cisco IOS XR? ### Response: To configure OSPF area parameters in Cisco IOS XR, use the 'area <area-id>' command in router configuration mode. Under this, you can specify the area type (stub, totally-stubby, NSSA, etc.), authentication, ranges for summarization, and virtual-links.
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FSDB-2-MSG_TO_FSDB_FAILED_SEND ### Response: (Severity: 2), (Category: FABRIC), (Description: This is to indicate that the process has failed to send an IPC message to the fabric management process that the plane is defective.), (Recommended Action: 1) Get the output from the following commands: 'sh controller fabric trace all' on the dSC sh diagnostic result location <this node> detail sh diagnostic trace error location all sh diagnostic trace message location all 2) shut down the identified faulty plane in admin configuration: controller fabric plane <> shutdown 3) restart the process that is seeing the issue Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ncs5500-1-RESTART_NOT_SUPPORTED_SUPPL ### Response: (Severity: 1), (Category: PLATFORM), (Description: This is an error message associated with RESTART_NOT_SUPPORTED See RESTART_NOT_SUPPORTED for explanation), (Recommended Action: See RESTART_NOT_SUPPORTED for explanation)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PFILTER_EA-3-ERR_IM_CAPS ### Response: (Severity: 3), (Category: L2), (Description: 1) An ACL could not be applied to hardware because of one of the following reasons: a) TCAM max limit has been reached. b) RLB resources are not available. c) IPv6 address compression table is full. d) UIDB set failed, possible UIDB/PRM down This error can happen when a new bundle member is added and the ACL can not be programmed successfully. 2) An ACL could not be removed from hardware.), (Recommended Action: 1) When this error occurs the running-config will not be in sync with line card configuration. It is recommended that the bundle member on which the error occured be removed from the bundle. The ACL configuration may also be reduced until it can be successfully programmed on the new bundle member. 2) If the ACL could not be removed from hardware a line card reload is recommended.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIA-1-SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_1_0 ### Response: (Severity: 1), (Category: FABRIC), (Description: SKT_SMC1_INTR_ALIGN_ERROR_LANE_INDICATE_1 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PFM-3-CHIP_RESET_NOT_SUPPORTED ### Response: (Severity: 3), (Category: PLATFORM), (Description: Platform Fault Manager Node detects an invalid Reset action defined in the Application Fault Condition Database.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: UPGRADE_FPD-6-PASSED ### Response: (Severity: 6), (Category: PLATFORM), (Description: It indicates that a FPD has been upgraded or downgraded successfully. The current image version and the upgraded image version are displayed.), (Recommended Action: No action is need from user. This is to inform user that FPD downgrade or upgrde is successful. No action is required.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FCA-2-SFP_LNK_FAULT_ERROR_39 ### Response: (Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SMC-3-NODE_ID_FAIL ### Response: (Severity: 3), (Category: SYSDB), (Description: SysDB cannot get the node id for further processing the request. Error code indicates the error received by SysDB.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: RSPP_REX-3-IMP_CONNECT ### Response: (Severity: 3), (Category: SERVICES), (Description: The diversion manager was unable to connect to IM Proxy to register as an interface capsulation. Diversion information may not be correctly applied or inconsistent.), (Recommended Action: The connection will be retried automatically. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MBI_HELLO-6-IMDR_COMPLETED ### Response: (Severity: 6), (Category: PLATFORM), (Description: The MBI hello process is notifying shelfmgr that IMDR has completed.), (Recommended Action: No action is required.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FEATURE_AGENT-4-PARSE_ERR ### Response: (Severity: 4), (Category: INFRA), (Description: Metadata for the identified feature could not be successfully parsed. This is an internal software error, and as a consequence, feature capability information may not be available.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BRIDGE-3-CRC_ERR_0_FIA_0 ### Response: (Severity: 3), (Category: PLATFORM), (Description: CRC error - 0 from FIA on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BM-5-MBR_BFD_NOT_RUNNING ### Response: (Severity: 5), (Category: L2), (Description: The BFD session is no longer required if BoB is not required, the Mux state is not at least distributing, and the BFD session perviously was required.), (Recommended Action: Ensure that the bundle and its members are configured correctly on the neighboring router, and that all the interfaces are up. Ensure that BFD is running on the member interfaces on the neighboring router.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IPT_EA_LTRACE-3-INIT ### Response: (Severity: 3), (Category: FORWARDING), (Description: This message indicates that ltrace initialization failed. Both the initialization type and the particular reason are displayed. This error prevents IP Tunnel Execution Agent process from printing ltrace information.), (Recommended Action: Please try restarting IP Tunnel Execution Agent process with the command <CmdBold>process restart ip_tunnel_ea location <node id><NoCmdBold>. If the problem persists, please contact Cisco TAC and provide this message text as well as the information specified in required_info section.)
Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CT_DSP-1-ALARM_TTI_MISMATCH_DEME ### Response: (Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)