| === EEickmeyer-M is now known as Eickmeyer_E-M | |
| === Eickmeyer_E-M is now known as EickmeyerE | |
| === EickmeyerE is now known as Eickmeyer-M1 | |
| === Eickmeyer-M1 is now known as Eickmeyer_E | |
| [02:10] <andrew> Hello! I would like to ask for help. | |
| [02:10] <andrew> When I use my note for a few hours, Kubuntu freezes completely. Neither keyboard nor touchoad nor mouse work. | |
| [02:11] <andrew> The fans increase the speed when this occurs. I already left the notebook on for 10 minutes and nothing happened. | |
| [02:11] <andrew> This often happens when I use the Firefox browser with several tabs open. Even so, I find it a little unlikely that the problem is the RAM consumption by the browser. | |
| [02:11] <andrew> My setup: i5 8500H / 8GB RAM 2400MHz / SSD M.2 128GB / Geforce GTX 1050 | |
| [02:13] <andrew> Has anyone been through this situation? Do you know how to solve it? Thank you. | |
| [02:30] <valorie> andrew: there are a couple of ways to check RAM use | |
| [02:30] <valorie> you can install a widget that tracks that and/or temperature | |
| [02:31] <valorie> control+escape will get you a part of Ksysguard, so you can see what's running and consuming RAM | |
| [02:31] <valorie> you can run top in the commandline | |
| [02:32] <valorie> I personally stopped using FF for a couple of reasons, but crashing and freezing were two of 'em | |
| [02:57] <IrcsomeBot1> <Linuxophil> Hey guys! I am going crazy with an issue on an all intel machine here. Just intel integrated graphics yet only nomodeset leads to a functioning display once X starts. I have tried distros from all main branches: Debian/Ubuntu, Suse, Fedora, Manjaro. The result is always the same. The device is a Toshiba DX2110 and search on the internet has revealed very little. Others seem to have the same problem, but no solutions are | |
| [02:57] <IrcsomeBot1> documented. | |
| [02:57] <IrcsomeBot1> <Linuxophil> The processor is a core i7 2600. Does anyone have experience with this kind of issue and maybe an idea where to go from here? | |
| [03:29] <guiverc> @Linuxophil, it reads like you've had issues with your graphics chipset, but haven't given details of your chipset. This room only supports Kubuntu though | |
| [03:32] <IrcsomeBot1> <Linuxophil> I want to use Kubuntu 20.04 and tried this first. The rest of the installations were just to trouble shoot. | |
| [03:32] <IrcsomeBot1> <Linuxophil> @guiverc, . | |
| [03:33] <guiverc> I use `sudo lshw -C video` to list-hardware of class video (that comment being easy to remember)... it usually shows details of card recognized by system providing details to search online for solutions, plus the driver= telling you what kernel module (driver) is used | |
| [03:35] <guiverc> (fyi: if you had one 'distro' that did work; that command also tells you what driver= or kernel module will make all work) | |
| === Eickmeyer is now known as Eickmeyer__ | |
| === Eickmeyer_E is now known as Eickmeyer | |
| === Eickmeyer__ is now known as Eickmeyer_E | |
| === Eickmeyer is now known as Eickmeyer--M | |
| === Eickmeyer--M is now known as Eickmeyer-K | |
| === Eickmeyer-K is now known as Eickmeyer-[m] | |
| [05:29] <IrcsomeBot1> <JJ_4884> How long does it take for approval in the Kubuntu forums... I might have a feature "bug". | |
| === jwashburn is now known as testing | |
| === testing is now known as Guest57091 | |
| [05:31] <Guest57091> hello | |
| [05:33] <Guest57091> Why is everyone silent | |
| [05:33] <Guest57091> ok, bye | |
| [05:39] <valorie> pfff | |
| [05:58] <lordievader> Good morning | |
| [09:21] <IrcsomeBot1> Vitalij was added by: Vitalij | |
| [09:23] <IrcsomeBot1> <Franzpow> valorie: what they expect when they join here lol | |
| [09:24] <IrcsomeBot1> <Franzpow> Good morning lordievader | |
| [09:25] <lordievader> Morning Franzpow | |
| [09:26] <IrcsomeBot1> <Vitalij> hello, … after updating tokubuntu 20.04 periodically, approximately every half an hour, wifi reconnects. It disappears for couple of seconds and connects again. I use "Intel Corporation Wireless 8265 / 8275" wifi card. Does anybody have any clue why it could happen and what I can try to fix that? Thanks in advance. | |
| [09:31] <lordievader> Vitalij: what do the logs say? | |
| [09:31] <lordievader> Namely NetworkManager logs. | |
| === Lord_of_Life_ is now known as Lord_of_Life | |
| [09:43] <IrcsomeBot1> <Vitalij> @lordievader, ```geg. 14 12:12:58 vv NetworkManager[1154]: <error> [1589447578.6776] dhcp4 (wlp61s0): error -111 dispatching events … geg. 14 12:12:58 vv NetworkManager[1154]: <info> [1589447578.6777] dhcp4 (wlp61s0): state changed bound -> fail … geg. 14 12:12:58 vv NetworkManager[1154]: <info> [1589447578.6778] device (wlp61s0): DHCPv4: trying to acquire a new lease within 90 seconds … geg. 14 12:14:28 vv NetworkManager[115 | |
| [09:43] <IrcsomeBot1> <info> [1589447668.6696] device (wlp61s0): DHCPv4: grace period expired … geg. 14 12:14:28 vv NetworkManager[1154]: <info> [1589447668.6697] device (wlp61s0): state change: activated -> failed (reason 'ip-config-unavailable', sys-iface-state: 'managed') … geg. 14 12:14:28 vv NetworkManager[1154]: <warn> [1589447668.6762] device (wlp61s0): Activation: failed for connection 'NetworkName' … geg. 14 12:14:28 vv NetworkManager[1154]: <info | |
| [09:43] <IrcsomeBot1> [1589447668.6793] manager: NetworkManager state is now CONNECTED_LOCAL … geg. 14 12:14:28 vv NetworkManager[1154]: <info> [1589447668.6813] device (wlp61s0): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed') … geg. 14 12:14:28 vv NetworkManager[1154]: <info> [1589447668.6853] dhcp4 (wlp61s0): canceled DHCP transaction … geg. 14 12:14:28 vv NetworkManager[1154]: <info> [1589447668.6854] dhcp4 (wlp61s0): s | |
| [09:43] <IrcsomeBot1> changed fail -> done … geg. 14 12:14:28 vv NetworkManager[1154]: <warn> [1589447668.7435] sup-iface[0x5605657dd300,wlp61s0]: connection disconnected (reason -3) … geg. 14 12:14:28 vv NetworkManager[1154]: <info> [1589447668.7452] device (wlp61s0): supplicant interface state: completed -> disconnected … geg. 14 12:14:28 vv NetworkManager[1154]: <info> [1589447668.7452] device (p2p-dev-wlp61s0): supplicant management interface state: | |
| [09:43] <IrcsomeBot1> completed -> disconnected … geg. 14 12:14:31 vv NetworkManager[1154]: <info> [1589447671.3059] policy: auto-activating connection 'NetworkName' (1978db96-2f20-406b-90bc-f153f9810543) … geg. 14 12:14:31 vv NetworkManager[1154]: <info> [1589447671.3063] device (wlp61s0): Activation: starting connection 'NetworkName' (1978db96-2f20-406b-90bc-f153f9810543) … geg. 14 12:14:31 vv NetworkManager[1154]: <info> [1589447671.3064] device (wlp61s | |
| [09:43] <IrcsomeBot1> state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed') … geg. 14 12:14:31 vv NetworkManager[1154]: <info> [1589447671.3068] manager: NetworkManager state is now CONNECTING … geg. 14 12:14:31 vv NetworkManager[1154]: <info> [1589447671.3073] device (wlp61s0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed') … geg. 14 12:14:31 vv NetworkManager[1154]: <info> [1589447671.3077] device | |
| [09:43] <lordievader> !paste | Vitalij | |
| [09:43] <ubottu> Vitalij: For posting multi-line texts into the channel, please use https://paste.ubuntu.com | To post !screenshots use https://imgur.com/ !pastebinit to paste directly from command line | Make sure you give us the URL for your paste - see also the channel topic. | |
| [09:43] <franzo> !pastebin | |
| [09:44] <lordievader> Vitalij please use a pastebin service, this is unreadable. | |
| === TheMetamorphosis is now known as Metamorphosis | |
| [09:45] <IrcsomeBot1> <Vitalij> yeah, sorry … https://paste.ubuntu.com/p/8CX9qXbtgV/ | |
| [09:47] <lordievader> Sounds to me like your DHCP server does not respond (in time) to a renew of the lease. | |
| [09:50] <IrcsomeBot1> <Vitalij> but it worked ok before update to 20.04, and it works well for other devices too | |
| === TheMetamorphosis is now known as Metamorphosis | |
| [11:12] <IrcsomeBot1> <avinash512> Hello. Does Kubuntu 20.04 has gamemode preinstalled? | |
| [11:13] <IrcsomeBot1> <RikMills> @avinash512, No, but it is simple to install | |
| [11:14] <IrcsomeBot1> <avinash512> @RikMills, Thanks. As soon as you replied found it on Muon. Installed :) | |
| [11:16] <IrcsomeBot1> <RikMills> We might have pre-installed it, but by the time it became a possibility, it was too late to test it and get it in. Ubuntu mate etc did earlier testing, but we did not know that. | |
| [11:23] <IrcsomeBot1> <avinash512> Thanks for clarifying | |
| [11:29] <BluesKaj> 'Morning all | |
| [11:43] <m_> ULDLINUX_V1.00.39_00.12 | |
| [12:42] <IrcsomeBot1> ibgomezo was added by: ibgomezo | |
| [12:52] <IrcsomeBot1> Abdulloh Mun'am was added by: Abdulloh Mun'am | |
| [12:55] <IrcsomeBot1> <Abdulloh Mun'am> anyone can help me, I can't write to Android via MTP | |
| [13:37] <user|57322> What is minimum system requirements for kubuntu 18.04 32 bit | |
| [13:38] <diogenes_> !requirements | |
| [13:38] <ubottu> Hardware requirements to install, boot and comfortably use Ubuntu are listed at https://help.ubuntu.com/community/Installation/SystemRequirements - For a !flavor with lower requirements, see !Xubuntu or !Lubuntu | |
| [13:39] <user|57322> Kubuntu requirements? | |
| [13:39] <BluesKaj> user|57322, https://help.ubuntu.com/community/Installation/SystemRequirements | |
| [13:40] <user|57322> There's nothing about kubuntu!!!!! | |
| [13:41] <mparillo> That is because all the GUI flavours other than Lubuntu have similar disk and memory footprints. | |
| [13:47] <BluesKaj> if he had more patience he could have found this by using quotes around the text in google, https://en.wikipedia.org/wiki/Kubuntu#System_requirements | |
| === erich is now known as E_Eickmeyer | |
| === manusha is now known as kachakache | |
| === kachakache is now known as suspension | |
| === suspension is now known as kachakache | |
| [16:35] <MavropaliasG> Hello, I have an older Kubuntu installation and I get this problem when trying to update https://pastebin.com/ZxEcUAVB | |
| [16:35] <MavropaliasG> what should I do ? | |
| === bruno is now known as testando_kubuntu | |
| === ben_ is now known as Guest33658 | |
| === saigel__ is now known as saigel | |
| [18:05] <user|80519> Hello all | |
| === Scotty_Trees3 is now known as Scotty_Trees | |
| [18:56] <marcelin> hi | |
| [19:55] <IrcsomeBot1> <Franzpow> I have this new tp-link wifi adapter. I have used it and on kubuntu the connection is stuck at 1mbps giving terrrible results on speedtest. I did not change the drivers and I found that the website gives you drivers for ubuntu 16.04.. I can't compile the driver and I am stuck. Any help? | |
| [19:55] <IrcsomeBot1> <Franzpow> Model TL-WN822N | |
| [20:00] <IrcsomeBot1> <Franzpow> https://askubuntu.com/questions/832087/how-to-install-tp-link-wn822n-on-ubuntu | |
| [20:00] <IrcsomeBot1> <Franzpow> tried this guide but I can't compile.. I think that it needs an older kernel | |
| [20:00] <IrcsomeBot1> <Franzpow> I can't figure out how to make it work by myself | |
| [20:03] <tomreyn> Franzpow: which kubuntu verison are you on there? 16.04 still? | |
| [20:13] <IrcsomeBot1> <Franzpow> nope 20.04 | |
| [20:13] <IrcsomeBot1> <Franzpow> but on the website there is no driver for 20.04 | |
| [20:20] <IrcsomeBot1> <Franzpow> I found that the chipset is the rtl8192 from dlink. I tried to compile and download the most updated driver from the website of dlink | |
| [20:20] <IrcsomeBot1> <Franzpow> But I wasn't able to compile | |
| [20:20] <IrcsomeBot1> <Franzpow> And install | |
| [20:25] <tomreyn> @Franzpow rtl8192eu from what i saw. but then there can be different hardware revisions etc. you should normally start by getting the output of lspci -knn (or "lsusb" if it's not listed by lspci) and then look for the [code:here] in suqre brackets to the end of the line of this wireless device | |
| [20:25] <tomreyn> *square | |
| [20:25] <IrcsomeBot1> <Franzpow> So I have rev5.0 as it written on my adapter | |
| [20:25] <tomreyn> https://github.com/noud/rtl8192EU_WiFi_linux supports more recent kernel versions | |
| [20:26] <IrcsomeBot1> <Franzpow> But If I run the command I see a bunch of stuff | |
| [20:26] <IrcsomeBot1> <Franzpow> And I think that's written 4.0 | |
| [20:27] <tomreyn> if you run which command you see a bunch of what stuff? | |
| [20:28] <IrcsomeBot1> <Franzpow> All the devices | |
| [20:28] <IrcsomeBot1> <Franzpow> But I can't find the adapter anymore | |
| [20:29] <tomreyn> so neither of the two commands lists it? | |
| [20:29] <IrcsomeBot1> <Franzpow> If I run lsusb I can find it: … Version 4 RTL8192EU | |
| [20:30] <tomreyn> okay, now share the full output for this device, on a pastebin | |
| [20:30] <tomreyn> !paste | |
| [20:30] <ubottu> For posting multi-line texts into the channel, please use https://paste.ubuntu.com | To post !screenshots use https://imgur.com/ !pastebinit to paste directly from command line | Make sure you give us the URL for your paste - see also the channel topic. | |
| [20:30] <IrcsomeBot1> <Franzpow> Output of lsusb? | |
| [20:30] <tomreyn> yes. or is this computer offline for now? | |
| [20:31] <IrcsomeBot1> <Franzpow> No I can navigate but the speed is 8mbit | |
| [20:31] <IrcsomeBot1> <Franzpow> It should be double | |
| [20:31] <tomreyn> that's good enough to post the output | |
| [20:31] <IrcsomeBot1> <Franzpow> https://pastebin.com/UZtks5Ks | |
| [20:31] <IrcsomeBot1> <Franzpow> sure | |
| [20:33] <tomreyn> the web page at this url asks me to solve a captcha | |
| [20:34] <IrcsomeBot1> <Franzpow> Lol solve i | |
| [20:34] <IrcsomeBot1> <Franzpow> It | |
| [20:34] <tomreyn> or you could have used the pastebin ubottu told you about | |
| [20:34] <IrcsomeBot1> <Franzpow> pastebin said that I pasted too many times (2) in a short period of tine | |
| [20:34] <IrcsomeBot1> <Franzpow> Time* | |
| [20:34] <IrcsomeBot1> <Franzpow> I used it | |
| [20:34] <IrcsomeBot1> <Franzpow> Ah no sorry | |
| [20:34] <tomreyn> so this is Bus 003 Device 003: ID 2357:0108 TP-Link TL-WN822N Version 4 RTL8192EU | |
| [20:35] <tomreyn> 2357:0108 is the device ID, RTL8192EU the chipset | |
| [20:35] <IrcsomeBot1> <Franzpow> my bad I thought that it was the same than paste.bin | |
| [20:35] <tomreyn> i see | |
| [20:35] <tomreyn> no problem | |
| [20:35] <IrcsomeBot1> <Franzpow> yeah that is the chipset | |
| [20:36] <tomreyn> what's the output of cat /proc/version | |
| [20:36] <IrcsomeBot1> <Franzpow> cat/proc/version … bash: cat/proc/version: File o directory non esistente | |
| [20:36] <IrcsomeBot1> <Franzpow> directory not found | |
| [20:38] <IrcsomeBot1> <Franzpow> there was a space between cat and /proc | |
| [20:38] <IrcsomeBot1> <Franzpow> https://paste.ubuntu.com/p/sBzqP973RZ/ | |
| [20:38] <IrcsomeBot1> <Franzpow> here it is the output | |
| [20:42] <tomreyn> @Franzpow: so you should try to build the driver at https://github.com/noud/rtl8192EU_WiFi_linux | |
| [20:42] <IrcsomeBot1> <Franzpow> git clone https://github.com/noud/rtl8192EU_WiFi_linux | |
| [20:43] <IrcsomeBot1> <Franzpow> cd and make?* | |
| [20:44] <IrcsomeBot1> <Franzpow> I don't compile everyday | |
| [20:44] <tomreyn> the commands are listed there | |
| [20:44] <tomreyn> first git clone and cd though, yes | |
| [20:44] <IrcsomeBot1> <Franzpow> thanks! | |
| [20:44] <IrcsomeBot1> <Franzpow> I see the commands | |
| [20:46] <tomreyn> @Franzpow: actually this one may be better since it supports dkms: https://github.com/Mange/rtl8192eu-linux-driver | |
| [20:47] <tomreyn> i just don't know whether this one was tested with a recent kernel version like you have | |
| [20:47] <IrcsomeBot1> <Franzpow> mmmm If I am not wrong I tried to compile this before and failed | |
| [20:48] <IrcsomeBot1> <Franzpow> btw I am trying the first one first | |
| [20:48] <tomreyn> Mange's seems to support up to linux 5.6 | |
| [20:48] <IrcsomeBot1> <Franzpow> what is dmks? | |
| [20:49] <tomreyn> dkms | |
| [20:49] <IrcsomeBot1> <Franzpow> Dkms* | |
| [20:49] <tomreyn> it's a mechanism to automatically rebuild this kernel module whenever you install a new kernel update | |
| [20:49] <tomreyn> with the noud driver you'll always need to rebuild it manually | |
| [20:50] <tomreyn> that's whenever you get an update to the linux-... packages | |
| [20:51] <IrcsomeBot1> <Franzpow> :O | |
| [20:51] <IrcsomeBot1> <Franzpow> so I need dkms | |
| [20:52] <IrcsomeBot1> <Franzpow> I installed the first one, do I have to reboot? | |
| [20:52] <IrcsomeBot1> <Franzpow> do I have to blacklist the old drivers? I want first to see if this one it's working | |
| [20:52] <IrcsomeBot1> <Franzpow> later I will try the one with the dkms | |
| [20:53] <IrcsomeBot1> <Abdulloh Mun'am> @Abdulloh Mun'am, ??? | |
| === LynX is now known as Guest45791 | |
| [20:55] <Guest45791> im curious to know if there is a workspace option on this system | |
| [20:55] <IrcsomeBot1> <Franzpow> tomreyn: following all the steps, my situation hasn't changed | |
| [20:56] <IrcsomeBot1> <Franzpow> Installing the driver without dkms did nothing for me | |
| [20:59] <Guest45791> i recently changed to this distro from linux mint | |
| [20:59] <Guest45791> is there that option to switch workspaces on kubuntu or there is something i have to install | |
| [21:01] <tomreyn> Franzpow: i'm sorry i'm too tired to guide on each step right now. maybe you can get better and faster support on the #ubuntu IRC channel on freenode. | |
| [21:03] <leaftype> aw, might have been able to help with that one | |
| [21:03] <leaftype> oh well, I wasn't paying attention | |
| [21:04] <IrcsomeBot1> <Franzpow> tomreyn: that's fine thank you anyway | |
| [21:04] <tomreyn> leaftype: gogogo ;) | |
| [21:05] <tomreyn> you just need to talk through this ugly telegram bridge | |
| [21:08] <IrcsomeBot1> <Franzpow> leaftype: if you can help me I still need help | |
| [21:26] <manos> Hi all. Anyone having an issue with openrazer+polychromatic (Kubuntu 20.04)? It's not picking up my keyboard (supported Cynosa Razer). | |
| === Lord_of_Life_ is now known as Lord_of_Life | |
| === TheMetamorphosis is now known as Metamorphosis | |
| === TheMetamorphosis is now known as Metamorphosis | |
| [22:06] <IrcsomeBot1> <zparihar> Hey guys, I downloaded the Onlyoffice SNAP. When I create a file and try to save it with a specific filename, the save dialog does not allow me to set a custom name. The only option is to save it as 'Document1.docx' … Does anybody have an idea as to why? | |
| [22:08] <IrcsomeBot1> <Franzpow> I solved the problem. tomreyn the second one with dkms worked fine. Now I have 30mbit in download and 20 up. | |
| [22:08] <IrcsomeBot1> <Franzpow> Thanks | |
| [22:19] <lsd|2> whats the command to leave vi without overriding file? | |
| [22:19] <lsd|2> :wq overrides but i dont want , i want to leave | |
| === leaftype2 is now known as leaftype | |
| [22:38] <cchristiansen> :q! | |
| [23:55] <user|bob76> Hello, I have an issue with "Input Signal Out of Range" on my main computer. After the last update, it requested a restart and after I logged on, the screen went blank the out of range message. I am using Kubuntu 19.10 What can I do? | |