Datasets:

ramixpe

/

sp_dataset_llama

like 0

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CT_DSP-1-ALARM_LOS_PORTT3 ### Response: (Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: INSTHELPER-4-INTERNALERR ### Response: (Severity: 4), (Category: INSTALL), (Description: An internal software error occurred.), (Recommended Action: An internal software error occurred due to an install helper failure. This internal error will be recovered automatically. No user action is required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: tunnel_ea-3-PROC_READY_FAILED ### Response: (Severity: 3), (Category: PKT_INFRA), (Description: sysmgr had difficulty in processing the READY notification for tunnel_ea.), (Recommended Action: If there is a problem, it might be cleared by restarting tunnel_ea)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: OPTICS-3-MACSEC_FIPS_POST_CFG_NOT_SUPPORTED ### Response: (Severity: 3), (Category: L2), (Description: 1. config not supported on this node. If specifically configured for this LC Remove this config using command, 'no hw-module macsec-fips-post location <>'), (Recommended Action: Remove config using 'no hw-module macsec-fips-post location <>.If specifically configured for this LC. Else no action required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PBR-3-EA_SHUTDOWN ### Response: (Severity: 3), (Category: FORWARDING), (Description: This messages indicates that a failure has occured while PBR is gracefully shutting down. Particular reason is included in the message.), (Recommended Action: Allow PBR EA to exit and validate with the command <CmdBold>show process pbr_ea location <node id><NoCmdBold>. If it does not exit, use <CmdBold>process restart pbr_ea location <node id><NoCmdBold> to recover. If the problem persists, contact Cisco TAC.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IPV4_MFWD-4-ERR_MRIB_INIT_RETRY ### Response: (Severity: 4), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SYSMGR-7-DEBUG ### Response: (Severity: 7), (Category: OS), (Description: An informational message only), (Recommended Action: Contact support.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SPAMSG-3-DEBUG_INTERNAL_ERROR ### Response: (Severity: 3), (Category: L2), (Description: This is an internal SPA related error msg), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SYS-3-RN_NDESC ### Response: (Severity: 3), (Category: MGBL), (Description: A deletion operation to an internal data structure failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CFP-3-LANE_8_HIGH_RX_POWER_WARNING ### Response: (Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power warning threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLAT_L2FIB_MAC_CACHE-6-RESYNC_COMPLETE ### Response: (Severity: 6), (Category: PLATFORM), (Description: The command to resynchronize the MAC address table may take a while to complete. This message indicates that resynchronization is complete and the MAC address table can be displayed..), (Recommended Action: No particular action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CFP-2-LANE_12_HIGH_RX_POWER_ALARM ### Response: (Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: QNET-7-GET_NODEID_INFO ### Response: (Severity: 7), (Category: OS), (Description: Failed to get the nodeid %x- error code %s- Error description), (Recommended Action: Debug message only. No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: What is the purpose of the MPLS TE passive interface feature? ### Response: The MPLS TE passive interface feature allows an interface to be excluded from the MPLS TE topology database, while still allowing MPLS TE LSPs to be established over that interface. Passive interfaces are not considered during CSPF path calculation. This is useful for interfaces that are not under the control of TE or that have limited bandwidth.

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: DPA-3-FIELD_DEPEND_ERR ### Response: (Severity: 3), (Category: PLATFORM), (Description: The PMF dependency ordering is incorrect for the groups configured.), (Recommended Action: Contact support.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: REDDRV-2-IN_INSTALL_RESET ### Response: (Severity: 2), (Category: PLATFORM), (Description: Notify node reset reason - install has finished current install operation on the node and would be rebooting it within specified time. drp-reddrv should refrain from rebooting the node until timeout happens.), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: NPU_DRVR-3-NPU_CPA_GEN_ERR_INFO ### Response: (Severity: 3), (Category: FABRIC), (Description: The NPU CPA generic failure OR info), (Recommended Action: None. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: What is the function of the 'install rollback' command in Cisco IOS XR? ### Response: The 'install rollback' command in Cisco IOS XR is used to revert the router's software to a previous committed state, useful for undoing changes that may have caused issues.

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SLA-3-PROFILE_UPDATE_FAILED ### Response: (Severity: 3), (Category: INFRA), (Description: The SLA Client Library received updated configuration for a profile and the update could not be applied locally. This indicates that there was insufficient memory for modification of the profile and its associated data. Any operations using this profile have been suspended and their associated metrics removed until the profile is successfully updated.), (Recommended Action: This indicates a low-memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. The Client Library will attempt to resync itself with the Profile Manager or an immmediate resync can be attempted by reconfiguring the profile.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ETNA-1-ALARM_OPTICS_PWR_SUPPLY_ALARM ### Response: (Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIA-1-SKT_SP0_INTR_SLICE3_CODE_ERR_HIGH_0 ### Response: (Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE3_CODE_ERR_HIGH interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CFP-3-LANE_0_LOW_BIAS_WARNING ### Response: (Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias less than or equal to the low laser bias warning threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: NPUXBAR_BRIDGE-0-CPU_PKT_F0_MBE ### Response: (Severity: 0), (Category: PLATFORM), (Description: IBS from CPU packet FIFO 0 multiple bits error.), (Recommended Action: Reset the board.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BCDL-7-MSG_STALL_RESET ### Response: (Severity: 7), (Category: OS), (Description: The consumer is not servicing the incoming message queue.), (Recommended Action: Contact support.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IPV4_MFWD-4-ERR_AIB_UPDATE ### Response: (Severity: 4), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: LIBPARSER-3-ERR_THREAD_COND_WAIT ### Response: (Severity: 3), (Category: MGBL), (Description: 'The call to pthread_cond_wait() was unsuccessful'), (Recommended Action: *SH_TECH*)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CFP-2-LANE_6_HIGH_RX_POWER_ALARM ### Response: (Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP Rx power greater than or equal to the high Rx power alarm threshold. The CFP is the pluggable optics on the line cards. The Rx power threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Verify that the input signal has the necessary attenuation. Replace the attenuator with working one (if any) to isolate bad attenuator. Replace the optics with working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FCA-2-LS_LFI_LENGTH_ERR ### Response: (Severity: 2), (Category: PLATFORM), (Description: Device driver detected a lfi length error), (Recommended Action: Please try to correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: XTC-3-TRACE_INFRA_ERROR ### Response: (Severity: 3), (Category: OS), (Description: An error occurred in XTC trace infrastructure. See the error message for details. This error can be related to initialization/deletion failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: EVPN-6-CORE_INTERFACE_STATE ### Response: (Severity: 6), (Category: L2), (Description: The configured core interface changed state.), (Recommended Action: If the state change was unexpected, confirm the configuration settings for the interface.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: NPUXBAR_BRIDGE-1-EBS_CPU_LP_FIFO_FULL ### Response: (Severity: 1), (Category: PLATFORM), (Description: Egress Buffer and Scheduling to CPU FIFO full.), (Recommended Action: Reset the board.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: NVGEN-3-PATTERN_NOT_FOUND ### Response: (Severity: 3), (Category: MGBL), (Description: Taskid pattern not found where it was expected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IOSXRV_LICENSE_UDI-6-INFO ### Response: (Severity: 6), (Category: PLATFORM), (Description: The particular operation mentioned in the message occured due to some reason. This is not a failure, the process can continue functioning as expected.), (Recommended Action: Debug message only. No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: INV-7-FAIL_RACK_CREATE ### Response: (Severity: 7), (Category: PLATFORM), (Description: The RACK entry is a must in inventory management. This is the first element in the invntory sysdb hierachy. If the rack is not created we are not proceeding further to create slots.), (Recommended Action: No action needed. Inventory Manager process will restart automatically)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SSE_PLU-1-PLU_RESMON_OOR_YELLOW ### Response: (Severity: 1), (Category: PLATFORM), (Description: PLU resmon on the node has detected that the number of routes has exceeded prescribed limits. Any further increase routes will lead to traffic loss.), (Recommended Action: Take immediate action to delete routes from the system.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CCC-3-HOST_KERNEL_CORE_DUMP ### Response: (Severity: 3), (Category: DRIVER), (Description: HOST has reported a kernel core dump event.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIA_DRVR-3-SLICE_FAILURE ### Response: (Severity: 3), (Category: FABRIC), (Description: 1. Slice failure: Slice failure affecting all slices and no slice is powered UP.), (Recommended Action: System is not usuable. Power failure happened during system boot. Need to reload the board for recovery. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SCHBRO-7-DATAARRAYLENGTH ### Response: (Severity: 7), (Category: MGBL), (Description: The number of elements entered for a data array does not match the expected value.), (Recommended Action: Use the classinfo command to get more information about the naming or value information of a class. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: REDDRV-2-MSG_PRIMARY_GLARE ### Response: (Severity: 2), (Category: PLATFORM), (Description: There appear to be two PRIMARY RP's in the system.), (Recommended Action: None; the node which has arbitrated for the least time will be reset.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: LPTS-3-BAG_ENCODE_FAILED ### Response: (Severity: 3), (Category: OS), (Description: An internal error was detected when trying to encode a SysDB Bag.), (Recommended Action: Copy the error message exactly as it appears, and report it to your technical support representative. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: VKG_MCAST_EDM-7-EDM_REGISTER_FAILURE ### Response: (Severity: 7), (Category: ROUTING), (Description: The VIKING-MCAST library encountered internal error during SysDB/EDM init setup. The init setup will be retried for finite number of retries.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: GNSS-4-SHUTDOWN_CHECK_FAILED ### Response: (Severity: 4), (Category: L2), (Description: GNSS Manager could not determine whether all GNSS configuration has been removed and so cannot exit safetly. GNSS Manager may be running despite no GNSS configuration existing.), (Recommended Action: No action is required. If the message continues to be seen, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: NIRVANA-2-S8_POWER_FAIL ### Response: (Severity: 2), (Category: PLATFORM), (Description: The Satori-8 RP did not power up fully.), (Recommended Action: power-on reload Satori-8 RP. consider RMA Satori-8 RP if issue persists.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: APPMGR-6-DOCKER_DAEMON_STARTED ### Response: (Severity: 6), (Category: INFRA), (Description: Docker daemon has started. Docker related functionalities will now be available.), (Recommended Action: None.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLIM_SERVICES-3-ERR_EVM_EVENT_BLOCK ### Response: (Severity: 3), (Category: PLATFORM), (Description: An error occurred in the event loop. Cause of the error will be mentioned in the message displayed. The error could result in Brahmos PLIM driver process to be in inconsistent state.), (Recommended Action: Restart the plim_services process (process restart plim_services location <>) If the issue persists, do a cold reboot Services PLIM MSC.If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SHMWIN-7-SHMWIN_DEBUG ### Response: (Severity: 7), (Category: OS), (Description: SHMWIN encountered an unexpected condition and return error code to the calling process), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ESD-3-SWITCH_DISCOVERY_FAILED ### Response: (Severity: 3), (Category: INFRA), (Description: The Ethernet Switch Driver (ESD) process timed out while waiting for the switch PCIe device to come online. In order to recover, ESD will reset the switch, then exit so that it can be restarted by the process manager and attempt to discover the switch PCIe device again.), (Recommended Action: If this problem does not recur, no intervention is required to recover. To determine why this problem occurred, or if the problem occurs multiple times, collect the Ethernet Switch Driver (ESD) traces and related information using the 'show tech-support control-ethernet', and 'show controllers switch trace' commands. Also collect the OS kernel logs. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: How have network applications and traffic evolved since the early days of data networking? ### Response: Since the 1980s, network applications have expanded dramatically to include video conferencing, instant messaging, IPTV, telepresence, telemedicine, peer-to-peer sharing, video surveillance, online banking, online shopping and countless others. Internet users have grown from 16 million in 1995 to 1.46 billion in 2008, with a corresponding increase in per-user bandwidth consumption.

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FIA-1-TEMP_TOO_HIGH_1 ### Response: (Severity: 1), (Category: FABRIC), (Description: Crossbar fabric interface ASIC-1 is reporting a very high temperature.), (Recommended Action: Check if board is reporting temperature alarm. If not, it is due to Crossbar fabric interface heatsink not being installed properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ESD-3-CCC_PON_INCOMPATIBLE ### Response: (Severity: 3), (Category: INFRA), (Description: The CCC PON version must be upgraded. Else black VLAN translation will not work properly in all situations. Also ESD initiated switch resets will not work), (Recommended Action: Must upgrade CCC PON.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FWD_NETIO_DLL-3-PAK_PROC_ERR ### Response: (Severity: 3), (Category: PKT_INFRA), (Description: There was an packet processing error. Possible causes 1) Unable to retrieve dest nodeid from inside the pkt 2) Error setting/getting input ifh from pkt), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: How is MPLS Traffic Engineering (TE) configured in Cisco IOS XR? ### Response: MPLS TE is enabled globally using the 'mpls traffic-eng' command in global configuration mode. TE tunnels are configured using the 'interface tunnel-te' command. Various TE attributes such as bandwidth, priority, and path options are configured under the tunnel interface. The 'autoroute announce' command is used to enable the tunnel to be used for forwarding traffic.

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ATM_VCCLASS-3-PRODUCER_DATA ### Response: (Severity: 3), (Category: MGBL), (Description: A failure occurred in the ATM VCCLASS producer while preparing the vcclass data to be sent to ENS.Inernal failure.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FT-3-FAN_PLUGIN_INIT_FAILED ### Response: (Severity: 3), (Category: LIBRARY), (Description: Fan plugin initialization failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IPV4_IO-4-UNKNOWN_MESSAGE ### Response: (Severity: 4), (Category: IP), (Description: The IPV4_IO process has received an unknown event message.), (Recommended Action: This message indicates that the ipv4_io process has received a message type that it wasn't expecting. This message has been ignored and no further action needs to be taken. The message may have been sent to this process by mistake or if any installs have taken place there may be a version mismatch between the server and a client. On its own this message does not indicate a problem. If other problems are seen then include this error in the report.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PIM-5-RESERVED_HELLO ### Response: (Severity: 5), (Category: ROUTING), (Description: PIM reserved type hello message received.), (Recommended Action: No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: OSPFv3-3-EXTERNALERR ### Response: (Severity: 3), (Category: ROUTING), (Description: An external software error occurred. This is a non-OSPFv3 errors triggered from external DLLS, libraries, or inter-process calls.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: sIMP-3-FATAL_ERR ### Response: (Severity: 3), (Category: SECURITY), (Description: An internal software fatal error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MSDP-3-IARM_UPDATE_FAIL ### Response: (Severity: 3), (Category: ROUTING), (Description: An error occured when registering to IARM.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging processes msdp<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging processes msdp<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show msdp trace events<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show msdp trace events<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ISSU_DIR-3-NTFN_CLIENT_UNREGISTERED ### Response: (Severity: 3), (Category: INFRA), (Description: ISSU director received a message from a notifications client, but that client has not registered. The received message is dropped and not handled by ISSU director.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IEP-3-DAEMON_ERR_SYSDB_REG_VERIFY ### Response: (Severity: 3), (Category: IP), (Description: An error occurred while using SysDB.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BCDL-7-MSG_READ_STALL ### Response: (Severity: 7), (Category: OS), (Description: No data reads has been done by bcdl_agent from producer on a child subgroup for the specified time.), (Recommended Action: Contact support.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BRIDGE-3-MISS_EOP_0_XAUI_1 ### Response: (Severity: 3), (Category: PLATFORM), (Description: Missing EOP-0 from XAUI on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ICPE_GCO-6-REPLACE_ABORTED ### Response: (Severity: 6), (Category: PKT_INFRA), (Description: Package replace requested on this satellite has been aborted, as requested by the user. Run 'show nv satellite status' for more information about the current state of the satellite.), (Recommended Action: None.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BGP-4-ENCODE_NET_OVERRUN ### Response: (Severity: 4), (Category: ROUTING), (Description: Encoding the net has overrun the msg buffer. It may corrupt some memory.), (Recommended Action: This warning indicates possible memory overrun.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: AFMON-3-MAX_FLOW_LIMIT ### Response: (Severity: 3), (Category: PLATFORM), (Description: Software enforces a limit of 1.5 times the maximum number of flows permitted on a LC. When this limit is reached, no more new flows can be added unless the current flow count comes under the limit), (Recommended Action: Reduce the number of flows in the LC If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BRIDGE-1-FIFO_0_OFLOW_NPU2BR_0 ### Response: (Severity: 1), (Category: PLATFORM), (Description: FIFO-0 NPU to bridge instance-0 overflow.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BGP-4-LABEL_COLLISION ### Response: None

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: VKG_MPLS_EA-3-ERR_MEM ### Response: (Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in MPLS EA. Typically, this is an error where the memory allocation / access fails. Here is a list of possible reasons for this message (not all-inclusive). 1) Memory exhaustion due to overall system load 2) Shared memory access failure 3) Memory leaks leading to resource exhaustion), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef </RP> <LC> show cef location <> show cef mpls trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary show logging </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CFM-3-CFG_MP_CREATE_FAILED ### Response: (Severity: 3), (Category: L2), (Description: CFM encountered an error while trying to create new Maintenance Points and retrying the operation has not resolved the problem. This situation could indicate that system resources are low. The operational state of CFM will now be out-of-sync with configuration as some Maintenance Points will not have been created.), (Recommended Action: Restarting the CFM Daemon on the node where the problem has occurred may help to resynchronize the system state. This error may occur as a result of memory exhaustion; attempt to resolve any memory issues before attempting to solve this problem. After system resource issues have been resolved, issue 'process restart cfmd location <node>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: AMT-3-EVM ### Response: (Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: --)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: ETHERNET-4-INITIALIZATION ### Response: (Severity: 4), (Category: L2), (Description: A error occurred during the initialization of the common Ethernet driver library.), (Recommended Action: The driver process is restarted automatically, hence no user intervention should be required. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SYSDB-4-SYNC_FAIL ### Response: (Severity: 4), (Category: SYSDB), (Description: The error code shown was received during replicating sysdb data to other nodes in the system.), (Recommended Action: This error could be transient error and may not repeat frequently. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CEPKI-7-CERT_TIMER ### Response: (Severity: 7), (Category: SECURITY), (Description: Cerficate with invalid attribute.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: REDCON-1-STANDBY_NOT_READY ### Response: (Severity: 1), (Category: HA), (Description: Redcon has determined that the standby card is NOT ready because of the failure of one or more events the prevent it from being in-sync with the active card.), (Recommended Action: Collect system log information. No action is required.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FWD_NETIO_DLL-3-INCORRECT_IDB ### Response: (Severity: 3), (Category: PKT_INFRA), (Description: Forwarder was supplied with a plim interface that does not have an idb yet.), (Recommended Action: No Action required Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: INGRESSQ-3-GENERAL_ERROR ### Response: (Severity: 3), (Category: FABRIC), (Description: A general major error occurred. The explanation is in the message itself.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BRIDGE-1-XAUI_A_DATABUS_STUCK_0 ### Response: (Severity: 1), (Category: PLATFORM), (Description: XAUI-A databus stuck on bridge instance-0.), (Recommended Action: Please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: IPV4_MRIB-3-MEM_ERR ### Response: (Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PIM-4-RESERVED_CONFIG ### Response: (Severity: 4), (Category: ROUTING), (Description: PIM DR priority value configured is reserved for Sticky DR), (Recommended Action: CONFIGURE A VALUE LESS THAN 4294967294 FOR DR PRIORITY)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: How to monitor RSVP TE tunnels bandwidth in Cisco IOS XR? ### Response: To monitor RSVP TE tunnels bandwidth, use the 'show mpls traffic-eng tunnels bandwidth' command in EXEC mode. RP/0/RSP0/CPU0:router#show mpls traffic-eng tunnels bandwidth

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MKA-5-MACSEC_POWER_STATUS ### Response: (Severity: 5), (Category: L2), (Description: MACsec power budgeting allows each port to check for the power availability from envmon before enabling the MACsec mode on the port. MKA session bringup would happen only after the successful power allocation. Power would be released after disabling the MACsec mode either by removing the macsec config from the interface or by configuring global macsec shutdown.), (Recommended Action: No action required (normal operation).)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: PLAT_ICPE_EA_DEBUG-6-REGISTER_FAILED ### Response: (Severity: 6), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform ICPE EA component.), (Recommended Action: No action is required. Platform software will correct itself if this happens.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CFP-3-LANE_15_HIGH_TEMP_WARNING ### Response: (Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperature threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted, the fan is operational and empty slots have filler cards installed. Check the 'show environment temperatures'. If the system temperature is normal then replace the optics with working one (if any). If the system temperature is not normal, verify the fan speed and make sure installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check specifically the 'Chassis Air Flow Guidelines' and 'Rack-Mounting and Air Flow clearance guidelines'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all', 'admin show inventory', 'show environment temperatures' and 'admin show environment fans'.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SPA_ATM_V2-7-DEBUG ### Response: (Severity: 7), (Category: L2), (Description: ATM SPA OC3/OC12 debug message), (Recommended Action: *NONE*)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BMP-4-ERR_ADJ_DLL_INIT ### Response: (Severity: 4), (Category: L2), (Description: A failure occurred during the initialization of the platform independent adjacency completion DLL. This will result in the hosting process being restarted.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: FABRIC_SRVR-4-ERR_ECM_NOTIFY ### Response: (Severity: 4), (Category: FABRIC), (Description: The Fabric driver was unable register with ECM to receive notifications when the connection to Sysdb goes down/up/closed. Fabric driver and the System should continue to function as normal, with the exception that the 'show' commands for Fabric driver will not be available.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: NP-2-ROLLBACK_FAIL ### Response: (Severity: 2), (Category: PLATFORM), (Description: TCAM programming encounters error and rollback fails. This is a double fault condition. Traffic mis-classification or loss may occur.), (Recommended Action: Reboot the LC. If problem persist this may indicate HW issue. Call your next level support.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CANB_SERVER-6-CBC_REFRESH_PWR_SEQ_COMPLETED ### Response: (Severity: 6), (Category: PLATFORM), (Description: CBC detected there there is a CRC check failure in the power sequencers on this card and reprogrammed the sequencers in error.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: RSP_CPUCTRL-3-SAC0_ECTW_RDATA_ACKERR ### Response: (Severity: 3), (Category: PLATFORM), (Description: Error reported by the cpu control fpga), (Recommended Action: Check and upgrade FPGAs on the board.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: BFD_SSE-3-ERR_AIB_INIT ### Response: (Severity: 3), (Category: L2), (Description: BFD SSE was unable to setup the cwconnection to AIB for processing adjcency changes events. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will reload the MSC.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: COHERENT-3-UPGRADE_PROV_FAILURE ### Response: (Severity: 3), (Category: PLATFORM), (Description: Cannot do FPD upgrade when Provisioning is in progress. Upgrade to be initiated again after provisioning), (Recommended Action: Issue FPD upgrade command again once provisioning is completed.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: EIGRP_POLICY-3-ORA_RUN ### Response: (Severity: 3), (Category: ROUTING), (Description: Internal error in the routing policy library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CFM-3-CFG_ATTR_UPDATE_FAILED ### Response: (Severity: 3), (Category: L2), (Description: CFM was unable to update internal state following a change to an interface attribute on a group of interfaces.), (Recommended Action: Restarting the CFM Daemon on the node where the problem has occurred may help to resynchronize the system state. This error may occur as a result of memory exhaustion; attempt to resolve any memory issues before attempting to solve this problem. After system resource issues have been resolved, issue 'process restart cfmd location <node>' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: STREE-4-CREATE_FAIL ### Response: (Severity: 4), (Category: L2), (Description: stp_process ran into errors while creating the spanning tree instance for control ethernet. stp_process error messages are indicative of health of control-ethernet which is critical for system operation. Misbehavior of stp_process can cause instability in the system.), (Recommended Action: Sysmgr process will restart the stp_process if it encounters this error. Check if the 'stp_process' is up and running if this error is encountered. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: CLNS-3-HSSD_REGISTER_FAIL ### Response: (Severity: 3), (Category: ROUTING), (Description: CLNS failed to register for an HSSD area. This is an internal error.), (Recommended Action: Please contact cisco-support with required information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: WD_STAT_PUB-3-SHM_ERR ### Response: (Severity: 3), (Category: HA), (Description: A shared memory for statistics area might be corrupted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: SPA_JBI-6-INFO ### Response: (Severity: 6), (Category: PLATFORM), (Description: This is an informational message from the FPGA upgrade facilitator), (Recommended Action: *NONE*)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: MFR_EA-3-MEMBER_CAPS_REMOVE_FAILED ### Response: (Severity: 3), (Category: L2), (Description: The MFR EA process failed whilst trying to remove caps.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)

Below is an instruction that describes a task, paired with an input that provides further context. Write a response that appropriately completes the request. ### Instruction: You are expert in Cisco Service provider technology, and Cisco IOS XR issues ang syslog ### Input: LRD-3-DEBUG ### Response: (Severity: 3), (Category: HA), (Description: this traceback is for debug - ignore), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)