text
stringlengths 78
3.17k
|
|---|
<｜begin▁of▁sentence｜>
### Instruction:
IEP-3-ERR_SYSDB_BIND
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred while using SysDB.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
QFPCPUBridgeFPGA-0-CPP0_FATAL_ERROR
### Response:
(Severity: 0), (Category: PLATFORM), (Description: The CPP device driver handled a fatal CPP0 error and requested that the QFP-CPU Bridge device driver report the error to the Platform Fault Manager.), (Recommended Action: Save log file and report this error. If line card fails to auto-reset, reset the line card.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_SENSOR_TEMP_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: The sensor in the satellite module reported a critical hi/lo sensor value against the configured threshold value.), (Recommended Action: Verify current sensor temperature values using the CLI: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>(admin)# show env <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>(admin)# show env <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. --> particularly for temp output of SAT ID. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>(admin)# show env trace <noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>(admin)# show env trace <noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
LDP-4-NSR_GLOBAL_SYNC_LOST
### Response:
(Severity: 4), (Category: ROUTING), (Description: LDP Non-stop routing synchronization lost with the standby node.), (Recommended Action: No action is required.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
PRM_SERVER-4-WARM_BOOT_NOT_POSSIBLE
### Response:
(Severity: 4), (Category: PLATFORM), (Description: There is some unsupported configuration in use, which is not supported by warm-boot. System shall reboot in cold mode. ASIC shall be reset and traffic forwarding would be impacted. If user did not intend warm boot, then this is just an informational message.), (Recommended Action: No further recovery is needed at this point. System shall auto-recover.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-4-OVERTEMP_AMBIENT_WARNING
### Response:
(Severity: 4), (Category: PLATFORM), (Description: Do not insert A9K-NP300-LC on V1 Fantray system. Upgrade to V2 FT and then insert A9K-NP300-LC. For internal testing with ROMMON variable, it is allowed to boot-up. But in case of Inlet temp more than 35.0C, all A9K-NP300-LCs will be put in IN-RESET state. Software won't take any further action after this.), (Recommended Action: Upgrade to V2 Fantray immediately and do not power on A9K-NP300-LC again without upgrading Fan)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
IOR-4-NULL_PTR
### Response:
(Severity: 4), (Category: INSTALL), (Description: Unexpected parameter value passed to function.), (Recommended Action: This is an internal software error and will be corrected automatically. Please retry the operation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
FIB-2-BGP_LU_UNSUPPORTED_IGP_PATH
### Response:
(Severity: 2), (Category: ROUTING), (Description: In label create/update, bgp lu has unsupported path in IGP), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
BGP-5-ALREADY_DONE
### Response:
(Severity: 5), (Category: ROUTING), (Description: An operation could not be performed because it had already been completed.), (Recommended Action: No further action is required as software should recover automatically.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
GROUP_MEMBERSHIP-5-OOR_THRESHOLD_DOWN
### Response:
(Severity: 5), (Category: ROUTING), (Description: Maximum number of groups accepted, either per interface or per vrf.), (Recommended Action: No action is required.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
SMART_LIC-3-EVAL_WILL_EXPIRE_WARNING
### Response:
(Severity: 3), (Category: LICENSE), (Description: The device is using the evaluation period which will expire in the specified time), (Recommended Action: Use the whatever the CLI is for ID token register CLI to register this device before the evaluation period expires.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
CPAK-2-LANE_1_LOW_TX_POWER_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power less than or equal to the low Tx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
FABIO_HFR-3-ERR_IMDR_V1_PREP_CALL_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: An error was encountered while calling the CCI (cpuctrl) cleanup function prior to restarting the process as part of an IMDR operation. The parenthesis contain the error code and the corresponding string description for it.), (Recommended Action: Linecard reload. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-BA_UNSPEC_FAIL_13
### Response:
(Severity: 3), (Category: IP), (Description: De-registration PBU is received for an non-existent binding.), (Recommended Action: Ignore this error message if it occurs only a few times. If the error persists, then do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
OSPF_EDM-3-LIST_CREATE_FAILED
### Response:
(Severity: 3), (Category: ROUTING), (Description: A process has requested information through SysDB, probably as the result of executing a show command. The creation of the external data manager list has failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
OBFLINFRA_INT-5-MSG_REPLY_ERROR
### Response:
(Severity: 5), (Category: OS), (Description: The message received by an application had a wrong reply data. The message data could be corrupted.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS traffic engineering interarea tunnels feature?
### Response:
The MPLS traffic engineering interarea tunnels feature allows MPLS TE tunnels to be established across IGP area boundaries. This enables TE to operate in multi-area environments. Interarea TE tunnels comprise hops in different IGP areas and are signaled as a contiguous end-to-end LSP.
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
BM-5-MLACP_ROID_MISMATCH
### Response:
(Severity: 5), (Category: L2), (Description: The peer device has transmitted a different Redundancy Object ID for the bundle to that expected.), (Recommended Action: Ensure that the ROID of the bundle (on both local and peer device) is as expected.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-HW_MODULE_PROFILE_PFC_NEED_RELOAD
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. If a traffic-class is added or removed from the config, there will be inconsistency between the user config and the hardware. Since the driver in LC has already started the asic initalization process before this config is received. Needs attention with line card reload.), (Recommended Action: System LC is inconsistent. Need to reload the line card for new values to take effect. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
DIAMETER_BASE-4-GY_DISABLE
### Response:
(Severity: 4), (Category: SECURITY), (Description: Disabling diameter gy app is not recommended.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
SPAQFPBridgeCtrl-0-OUT_OF_SYNC
### Response:
(Severity: 0), (Category: PLATFORM), (Description: SPA Bridge ASIC register access failure.), (Recommended Action: Reboot the line card. If the problem persists Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
RPL_COORD-4-REBOOT_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: During the processing of a software change notice, the command to get reboot information for this notice failed. The routine will now attempt to fall back on default disposition.), (Recommended Action: Check the install logs if all the packages are downloaded and install operations completed properly Copy the error message as it is and contact support)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
PKT_CLASS-3-LINUX_DATAPATH_STUCK
### Response:
(Severity: 3), (Category: OS), (Description: The Linux packet classifier has been unable to notify a peer thread regarding Linux datapath updates. Due to this issue, PacketIO for Linux applications may now fail.), (Recommended Action: If Linux datapath operation is important, then a process restart of the spp process (a traffic impacting operation) is necessary to recover. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
SONETMIBAPI-3-SYSDB_ACCESS
### Response:
(Severity: 3), (Category: SNMP), (Description: SonetMIB API had trouble registering/deregistering EDM or binding/unbinding SysDB.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
PKG-7-BAD_DEVICE_INDEX_ENTRY
### Response:
(Severity: 7), (Category: INSTALL), (Description: 'The package index file was found to be incorrect. Instdir will attempt to' ' repair it.'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
PIM-3-CONTEXT_CREATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
How does System Manager start and manage processes on IOS XR?
### Response:
System Manager starts processes based on the configuration in their process startup files. These files specify process name, path, instances, startup conditions, criticality, and placement. Sysmgr monitors each process and restarts it according to the restart policy if it fails. It can also start processes dynamically when certain config is committed.
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
BANNER-3-EVENT_MGR_CREATE_FAILED
### Response:
(Severity: 3), (Category: OS), (Description: A software error occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
What is the BGP maximum prefix feature used for?
### Response:
The maximum prefix feature allows a maximum number of prefixes to be configured for a BGP session. If the number is exceeded, the session can either be torn down or a warning can be logged. This protects against misconfiguration or DoS attacks. It is configured with the neighbor maximum-prefix command.
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
FIB-6-MPLS_SROPT_CRIT_FAIL_LABELSTK
### Response:
(Severity: 6), (Category: ROUTING), (Description: Label stack is NOT supported with SRopt feature. Please check your config. This is just for information>), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_LOS_PORTP8
### Response:
(Severity: 1), (Category: PLATFORM), (Description: 'Tx CAUI LOS'), (Recommended Action: Check/replace cable. Check/replace optics module.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
RT_CHECK_LIB-3-CERR_REGISTER_DLL
### Response:
(Severity: 3), (Category: OS), (Description: The call register the dll using cerr_register_dll failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
COREHELPER-6-DELETE_CORE
### Response:
(Severity: 6), (Category: OS), (Description: Successfully deleted the core file after copying.), (Recommended Action: This message is information only.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
FCA-2-SFP_LNK_FAULT_ERROR_2
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Port controller driver detected a TX fault on the SFP port.), (Recommended Action: In config mode, do a 'shut' and 'no shut' on port interface. If the problem persists, please OIR the SFP. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
IKE-3-MALFORMED_MESSAGE
### Response:
(Severity: 3), (Category: SECURITY), (Description: A quick sanity check is done on all received ISAKMP messages to verify that all component payload types are valid, and that the sum of their individual lengths equals the total length of the received message. This message failed the sanity check. This continous bad messages could imply denial of service attack), (Recommended Action: 'Contact the remote peer's administrator')
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS traffic engineering interarea tunnels feature?
### Response:
The MPLS traffic engineering interarea tunnels feature allows MPLS TE tunnels to be established across IGP area boundaries. This enables TE to operate in multi-area environments. Interarea TE tunnels comprise hops in different IGP areas and are signaled as a contiguous end-to-end LSP.
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
CLKCTRL_T-3-TX_ALARM_TAF_SYNC_0
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Condition raised possibly due to incorrect internal BITS transmitter configuration.), (Recommended Action: Re-configure and verify if condition is cleared. If the problem persists, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
SLC-5-NSF_STOP
### Response:
None
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
CCC-3-SECURE_BOOT_ERROR
### Response:
(Severity: 3), (Category: DRIVER), (Description: A Secure Boot validation error has been detected on the indicated card. CCC driver will try to recover from this failure by power-cycle the card.), (Recommended Action: If the problem is persitent after multiple retries, it could be hardware related problem with the CCC FPGA, CPU Complex FPGA or BIOS.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
What is the role of the install remove command in IOS XR?
### Response:
The 'install remove' command is used to delete inactive packages from the router's storage. This helps to free up disk space. Only inactive packages can be removed.
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
CSI_NETIO-3-MEM_ALLOC_FAILED
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Fwd basecaps dll was not able to get heap memory.), (Recommended Action: This message could be seen under low memory conditions and should recover once memory becomes available. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
NVRAM_PLATFORM-3-BATTERY_LOW
### Response:
(Severity: 3), (Category: MEDIA), (Description: Detect NVRAM low battery state, the data stored in NVRAM may be destroyed after power down the board with battery low state.), (Recommended Action: 'NVRAM Battery may need to be replaced')
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-7-GET_EVM_CTX_BY_TIMER
### Response:
(Severity: 7), (Category: HA), (Description: An internal error was detected when trying to find the event manager context by the given timeout timer.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
NVRAM-3-IO_MNT_LOW_MEM
### Response:
(Severity: 3), (Category: MEDIA), (Description: Could not get enough memory while trying to initialize nvram.), (Recommended Action: 'Router running low in memory. Reboot if possible.')
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-SC_DATAFIND
### Response:
(Severity: 4), (Category: SYSDB), (Description: An error occurred invoking a SysDB function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
STP_IO-3-ATTACH_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: STP was unable to initialize IO for one or more interfaces. BPDUs will not be sent or received through these interfaces. The process has restarted to attempt to clear the error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-6-INSTALL_ISSU_NEXT_COMMAND
### Response:
(Severity: 6), (Category: INSTALL), (Description: The run phase of an ISSU operation has finished successfully. Inform the user the operation has not completed yet.), (Recommended Action: No action is required.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
I2C-2-MSC_140_POWER_DISABLED_STATE_POWER_DOWN
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Board powering down due to power disabled state), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_LPTS_PIFIB-3-HFA_REGISTER
### Response:
(Severity: 3), (Category: OS), (Description: An internal hfa_register function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-3-NOTIF_THREAD_INIT
### Response:
(Severity: 3), (Category: HA), (Description: An error occured when attempting to initialize the event manager thread.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
BM-4-ERR_TX_HEAP_LOOKUP
### Response:
(Severity: 4), (Category: L2), (Description: An attempt to create a new database entry for a port failed. In addition to indicating that the line card is running low on system resources, this suggests that the shared-memory database is out-of-sync with the main database. Once some system resources have been released, the bundlemgr_local process should be restarted to retry the timer creation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
ETNA-1-ALARM_TX_LOL_MAPPERE
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-SYSDB_BIND
### Response:
(Severity: 7), (Category: INSTALL), (Description: The communications infrastructure may not yet be up. If this error persists, the Install infrastructure may not be able to operate), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
VASI_NETIO-3-INIT_DEBUG
### Response:
(Severity: 3), (Category: SERVICES), (Description: A failure occurred during the initialization of debug for the NetIO caps. If this occured during an upgrade operation then it will cause the NetIO process to reload. Otherwise this will cause the capsulation to be unloaded, and an error returned to the user.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
How does the Sysdb process collaborate with Install Manager in IOS XR?
### Response:
The Sysdb process collaborates with Install Manager in IOS XR by allowing the instdir process to use several trees in its namespace. The command requests passed from the instcmd process and the status of command executions by instdir are all communicated via different trees in the Sysdb.
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_15_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_15 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
PLAT_CLIENT-2-UPGRADE_LICENSE_AUTH_EXPIRED
### Response:
(Severity: 2), (Category: LICENSE), (Description: The device has not communicated with Cisco for an extended period of time and the device has not automatically renewed the entitlement authorizations. Software upgrades will be blocked once the upgrade grace period of 90 days expires. Please check show license platform summary/detail for more information.), (Recommended Action: Customer needs to obtain a new ID token from the Cisco CSSM portal CSSM virtual account and re-register the device with CSSM.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
DOMAIN_SYNC-3-INIT_FAILURE
### Response:
(Severity: 3), (Category: OS), (Description: Error during initialization of domain_sync daemon.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.')
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
CEM_PLATFORMS-2-ERR_STS
### Response:
(Severity: 2), (Category: L2), (Description: Error in cem operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
PPPOE_MA-6-INFO_MAC_IWF_IF_SES_TRSHLD_NO_EX
### Response:
(Severity: 6), (Category: SUBSCRIBER), (Description: The number of IWF PPPoE sessions from a particular MAC address on the given access interface is no longer exceeding the configured threshold.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
FEATURE_LPTS-3-FGID_DB_RETRIES_EXCEEDED
### Response:
(Severity: 3), (Category: FABRIC), (Description: A software error occurred, when the PA(Port Arbitrator) attempted to allocate FGID's from the FGID aggregator.), (Recommended Action: The process lpts_pa will attempt to recover by restarting. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
PIRD_INTF_EA-4-LOST_EVENT
### Response:
(Severity: 4), (Category: L2), (Description: The specified process failed to receive an event that was sent to it.), (Recommended Action: If any problems are seen, they may be rectified by restarting the process using the 'process restart' command.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
How to configure an IPv6 address on an interface in IOS XR?
### Response:
To configure an IPv6 address on an interface, use the 'ipv6 address' command in interface configuration mode. RP/0/RSP0/CPU0:router(config)#interface GigabitEthernet0/0/0/1
RP/0/RSP0/CPU0:router(config-if)#ipv6 address 2001:DB8::1/64
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
IPSLA-7-AGENT
### Response:
None
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
TTY-3-SYSDB
### Response:
(Severity: 3), (Category: MGBL), (Description: The TTY Server has encountered an error using the SysDB Library.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
INSTALL-6-OPTION_NOT_SUPPORTED
### Response:
(Severity: 6), (Category: INFRA), (Description: The specified option is not supported, and will have no impact on the behavior of the install operation. In most cases, this is because the option was added to allow script compatibility with another version/platform of IOS-XR.), (Recommended Action: No action is required.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
FWD_BASE_NETIO-5-UNSUP_MAJOR_VERSION
### Response:
(Severity: 5), (Category: PKT_INFRA), (Description: FINT DLL does not support DLL upgrade across major version changes. This will cause netio to take default action to restart for upgrade to take effect.), (Recommended Action: This message indicates that netio will take default action to restart as fwd netio dll does not support dll upgrade across major version number changes. No action is needed.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
QFP_DRIVER-3-ALLOCATE_NOTIFY
### Response:
(Severity: 3), (Category: L2), (Description: A CPP driver failed to allocate data.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
ELO-3-INTF_INIT_FAIL
### Response:
(Severity: 3), (Category: L2), (Description: The Ethernet Link OAM Daemon was unable to initialise the specified interface. This is likely caused by a memory resource allocation error. The exact error can be found in the 'show ethernet oam interface' command.), (Recommended Action: Un-configure and re-configure the interface. If that does not resolve the problem, restarting the process will cause a retry of the initialisation. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
PUNT_SWITCH-3-LINK_FAIL_3
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Punt link failed), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-3-FPGA_PCI_INIT_FAIL
### Response:
None
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
OSH_IPC_EM-3-NODEID_EXTRACT_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: OSH IPC ethernet media failed to extract nodeid.), (Recommended Action: restart the process)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
OBFL_MGR_COMMON-3-WRITER_DATA_CORRUPTION
### Response:
(Severity: 3), (Category: INFRA), (Description: OBFL failed to write the data stored in persistent storage. This might be due to data corruption by the software or a user altering the obfl storage or files therein.), (Recommended Action: Ensure that no user has altered the files or tried to meddle with the filesystem on /mnt/plog. Process restart of obfl_mgr on the problematic node, will, in most cases resolves the problem.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
IP_TUNNEL-3-CHKPT
### Response:
(Severity: 3), (Category: FORWARDING), (Description: Failed to write/delete the checkpoint entry for the specified tunnel. This may result in inconsistent state after tunl_gre_ma restarts.), (Recommended Action: Remove and reconfigure the specified tunnel.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
AIB-4-LEN_MISMATCH_CLDATA
### Response:
(Severity: 4), (Category: ROUTING), (Description: Interface EAs may store private information as 'client data' on interfaces in AIB. An interface EA made an invalid attempt to change the size of this data. There may be no immediate impact on traffic, but this issue should be addressed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
ATTACH-3-SERVER_GENERIC_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Attach server failure. %s- Failure message.), (Recommended Action: *SUPPORT*)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
NVGEN-3-CFS_INIT_ERR
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Nvgen server could not initialize the CFS'), (Recommended Action: Collect the show logging output, console logs and error trace. Collect the show nvgen trace output. And contact tac representative with this information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
Why is a microkernel-based architecture desirable for a carrier-grade NOS?
### Response:
In a microkernel OS, most functionality resides outside the kernel in separate processes with their own protected memory space. A failure in a non-kernel process does not impact the kernel or other processes. This enables fault containment and process restartability without service disruption. Only essential core services remain in the kernel, minimizing the impact of any kernel failures.
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
ESD-6-SPI_VLAN_CFG_CREATE_FAIL
### Response:
(Severity: 6), (Category: INFRA), (Description: Indicates that the programming of the SPI flash with the VLAN translation configuration information failed. This implies that the CCC will only control VLAN translation programming for Sysadmin. All other VLAN translation programming will be handled by ESD. In cases where ESD is not running, VLAN programming for non-sysadmin VLAN's will not be done, leading to inconsistent control plane connectivity.), (Recommended Action: Check all logs to determine root cause of failure. May be caused by incompatible CCC PON version, lack of disk space, communication error between ESD and CCC, communication error to send PON commands, etc. Upgrade of PON may be needed. A power-cycle of the board may be required to recover.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
HFR_IPV4_MRIB-3-INTERNAL_ERR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
PLATFORM_HFR_NETIO_LIB-4-FINT_IDB_NOT_FOUND
### Response:
(Severity: 4), (Category: PKT_INFRA), (Description: The FINT idb is not yet created in netio. This could be a transient condition.), (Recommended Action: Please capture the following information and if traffic loss also is being observed Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. show logging show proc blocked)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
MFWD_MA-3-ERR_SYSDB_BAG_FREE_INDIRECTIONS
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
MARVEL-6-RX_ASYNC_MSG
### Response:
(Severity: 6), (Category: L2), (Description: This error is generated when an invalid asynchronous message is received.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-INPUT_SIGNAL_ERROR_ALL_SLICE
### Response:
(Severity: 1), (Category: FABRIC), (Description: Error found on trace between all instances of FIA ASIC and FPGA.), (Recommended Action: Please reload the board in the next maintenance window. If the fault could not be cleared after card OIR, please RMA the card. 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR-7-ERR_FSM_STATE
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an unexpected/invalid state while trying to process an event for a client request. This facility is deemed crucial and the process automatically restarts on this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
CT_DSP-1-ALARM_ACCESS_ALARM
### Response:
(Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
MDACON-4-SET
### Response:
(Severity: 4), (Category: MGBL), (Description: An error occurred invoking an MDA function. This could be because the object does not exist or has the wrong type. The details are in the error string.), (Recommended Action: Check that the object to set exists and has the same type as it is being set to. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
FIB-6-RETRYDB_OK
### Response:
(Severity: 6), (Category: ROUTING), (Description: The FIB process had previously detected that there were one or more unresolved prefixes in the Retry database. Those have been resolved now FIB has resumed normal operation.), (Recommended Action: None.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
OSPF_POLICY-3-ORA_INSTBUILD
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error in policy library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-MISSING_HANDOFF_INDICATOR_OPTION
### Response:
(Severity: 3), (Category: IP), (Description: Handoff Indicator option is missing in the PBU.), (Recommended Action: If the issue is seen repeatedly, do the following action. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE1_LANE_CRC_ERR_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE1_LANE_CRC_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
ASIC_ERRORS-3-ERR_ECM_CREATE
### Response:
(Severity: 3), (Category: L2), (Description: The ASIC Error library encountered an error during the creation of the Error Connection Manager.), (Recommended Action: An error would be reported to the client application which should handle this condition appropriately. *None*)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-2-PN
### Response:
(Severity: 2), (Category: L2), (Description: The Product Number information is displayed for both supported and unsupported sfp/xfp types for the following actions - OIR of SFP/XFP - Soft and Hard OIR of SPA/LC - unshut of SPA), (Recommended Action: No actions are required as this is just an informational message.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
AIB-4-DLLINFO_DB_INIT_FAIL
### Response:
(Severity: 4), (Category: ROUTING), (Description: AIB maintains a database for interface-type-specific DLL information but was unable to initialize it. The process will attempt to recovery by restarting. This will not normally affect existing traffic but may affect the ability to process forwarding updates.), (Recommended Action: If the explanatory detail indicates memory exhaustion, Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.. *RECUR*)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
PDMA_SPP-3-ERR_PKT_OVERSIZED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: PDMA SPP Transmit over-sized packet drop.), (Recommended Action: Execute spp_pdma_show_ltrace from the kshell of the card where this message was seen.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
CCTL-3-GET_PATH_FAIL
### Response:
(Severity: 3), (Category: PLATFORM), (Description: The cctl_proxy process exited due to the reason mentioned in the message.), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process cctl_proxy location <>' to verify that the process is up and running.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
FIB-3-GTRIE
### Response:
(Severity: 3), (Category: ROUTING), (Description: FIB internally manages its prefix databases using generic tries. An error occurred while processing prefixes using the generic tries.), (Recommended Action: Try restarting the FIB process to see if the problem goes away. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
HPI-4-ACCESS_WIDTH_NOT_MATCH
### Response:
(Severity: 4), (Category: PLATFORM), (Description: PIO access to address with an different access width. It is possible to cause access failure.), (Recommended Action: Check the trackback and make sure the access is correct.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
NAL-4-SUBSCRIBERS_AFI_DOWN
### Response:
(Severity: 4), (Category: SUBSCRIBER), (Description: This syslog is printed when the parent interface configuration is modified or parent interface is deleted and subscribers are present on that interface.), (Recommended Action: This is warning to alert the user that V4 or V6 AFI will go down for all IPOE sessions present on parent interface.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO-3-SEM_OPEN_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'Semaphore Open Failed while sending signal to CTRLIO.' 'process will exit with failure.'), (Recommended Action: 'Retry the issu operation.If error persists' 'contact tac with 'show tech-support issu'.')
<|EOT|>
|