text
stringlengths
78
3.17k
<|begin▁of▁sentence|> ### Instruction: TIMER-3-TWMUTEXLOCKERROR ### Response: (Severity: 3), (Category: OS), (Description: A software error occurred acquiring a mutex.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: PFM-3-APPL_DEV_RESYNC_MISMATCH ### Response: (Severity: 3), (Category: PLATFORM), (Description: Platform Fault Manager Node detected a db inconsistency when performing a resync with an application.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: PMIPV6-6-ADMIN_CLEAR_BINDINGS ### Response: (Severity: 6), (Category: IP), (Description: The administrator cleared the bindings.), (Recommended Action: No action is required.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: CT_DSP-1-ALARM_TX_AHS_LOS_LANE3 ### Response: (Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: SLARP_LITE-3-ERR_SHMEM_OPEN_FAIL ### Response: (Severity: 3), (Category: L2), (Description: Attempt to open the shared memory fails), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: ISIS-4-ERR_BAD_PDU_LENGTH ### Response: (Severity: 4), (Category: ROUTING), (Description: The length (PDU_LENGTH) reported in the PDUTYPE header is greater than packet length (PKTLEN) from SOURCE_IF This system received an IS-IS packet that was LENGTH bytes long, which is shorter than the required header length for a PDUTYPE packet. The packet has been ignored.), (Recommended Action: Identify the source of the offending packet and correct it. If the message recurs 'debug isis packet-errors detail' may be used to provide a dump of the problematic PDU.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: spp-0-EMERG ### Response: (Severity: 0), (Category: PKT_INFRA), (Description: An emergency error has been detected.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: FLOWTRAP-4-BAD_ACTOR_MAC_CLEARED ### Response: (Severity: 4), (Category: OS), (Description: A source MAC address that was previously flagged by the punt flow trap has been removed from the 'penalty box.'), (Recommended Action: No action necessary. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: PWR_MGMT-6-FIRMWARE_UPGRADE_PWR_OK ### Response: (Severity: 6), (Category: PLATFORM), (Description: 'Firmware upgrade proceeding'), (Recommended Action: --) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: How does IOS XR provide high availability in terms of hardware redundancy? ### Response: IOS XR platforms support redundancy of critical hardware components including route processors (RP), line cards (LC), switch fabric cards (FC), power modules, and fan trays. IOS XR provides hitless failover to a redundant RP, N+1 redundancy for FCs, and online insertion and removal (OIR) of LCs, RPs, FCs, and other components. <|EOT|>
<|begin▁of▁sentence|> ### Instruction: ETHERNET-3-TX_DISABLE ### Response: (Severity: 3), (Category: L2), (Description: L2VPN Mgr has signalled at the remote AC has changed state. Due to this the local interface has been enabled/disabled in the TX direction if supported, or enabled/disabled in both directions otherwise.), (Recommended Action: If the remote AC has changed state then this message is expected. If the remote AC hasn't changed state and this condition isn't expected then this may indicate a problem, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: ETH_INTF-3-DLL_OPEN_FAILURE ### Response: (Severity: 3), (Category: PKT_INFRA), (Description: A failure occurred opening a dependent DLL and loading its symbols. The process is unable to run.), (Recommended Action: No action is required.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: INSTMGR-3-INSTALL_ERROR_BUT_NO_CLI_CONNECTION ### Response: (Severity: 3), (Category: INSTALL), (Description: The incremental install operation has encountered an error. And no 'nopromppt' is supplied in the activation command. The install would ask the user a question as how to proceed.), (Recommended Action: Do '(admin) install attach <install_id>', then answer the question.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: DHCPD-3-NOPACKET ### Response: (Severity: 3), (Category: IP), (Description: This error occurs when the supplied packet ptr is NULL. Most likely a resource problem within the system.), (Recommended Action: This indicates a low-memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: BRIDGE-1-STATEMC_1_ERR1_0 ### Response: (Severity: 1), (Category: PLATFORM), (Description: State machine - 1 ran into error-1 on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: QSFP_PLUS-2-DEV_QSFP_PID_NOT_SUPPORTED ### Response: (Severity: 2), (Category: PLATFORM), (Description: A PID not supported error was detected during QSFP+ initialization. A PID not support error is reported when either the PID can not be read or not supported on the platform. The QSFP+ is the pluggable optics on the line cards. QSFP+ initialization may happen when linecard boots up, QSFP+ OIR and line card process restart. The optics will not be enabled if a PID not supported error is detected.), (Recommended Action: Verify that the device is properly inserted. Check optic supportedness from the Cisco CCO document 'Cisco ASR 9000 Transceiver Modules: Line Card Support'. Also, check 'show controller <i/f> internal' to see whether optic is supported or not. Check all the FPDs are upto date using 'show hw-module fpd location all'. Replace the QSFP+ with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: LDP-3-RX_PKT_BAD_PDU_LEN ### Response: (Severity: 3), (Category: ROUTING), (Description: A message with invalid PDU length was received from the peer.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: MRP_MAD-3-INVALID_MRPDU_PARSE ### Response: (Severity: 3), (Category: L2), (Description: An MRPDU packet has been received which MRP could not decode. The MRP infrastructure was unable to parse the packet correctly because certain fields are missing or truncated. The specific MRPDU will be dropped and the protocol will continue to operate. The error string includes details of the position in the packet where parsing failed.), (Recommended Action: Use wireshark or another similar tool to verify the contents of the packet on the wire and ensure it is correctly formed. If the incoming MRPDUs are correctly formed, this error suggests invalid packet metadata. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: OSPF-3-NSR_SYNC_ERR ### Response: (Severity: 3), (Category: ROUTING), (Description: Error occurred during the NSR sync between active and standby OSPF processes.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Please include the output of the following commands: - show tech-support routing ospf) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: PIRD-3-DB_LOCK_ERROR ### Response: (Severity: 3), (Category: L2), (Description: An error was encountered while trying to perform an operation on a lock. The thread will continue without retrying the operation. In most cases, no further adverse behaviour should be observed.), (Recommended Action: *SUPPORT*) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: INGRESSQ_DLL-1-BRM_BARRIER_SYNCUP_FAILED ### Response: (Severity: 1), (Category: FABRIC), (Description: There might be a fabric disconnect in the system.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: CDP-4-NEIGHBOR_LIMIT ### Response: (Severity: 4), (Category: L2), (Description: The limit for neighbors in the CDP cache has been reached. No more neighbors will be added to the neighbor cache until some existing entries have been removed. The number of entries is limited to defend against DoS attacks.), (Recommended Action: Check the existing CDP neighbors for bogus entries, CDP may be the victim of an attempted DoS attack. The 'clear cdp table' command can be used if CDP neighbor entries need removing.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: IPV4MC_STATIC-7-ERR_CERR_V ### Response: (Severity: 7), (Category: ROUTING), (Description: Internal error. Cannot Register with CERR_V subsystem), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: BRIDGE-1-STATEMC_0_ERR2_3 ### Response: (Severity: 1), (Category: PLATFORM), (Description: State machine - 0 ran into error-2 on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: VERSMGR_LIB-7-SYSDB_GET ### Response: (Severity: 7), (Category: INSTALL), (Description: A Version Manager library was unable to retrieve some data from SysDB, so may not be able to function. Installations may not produce the expected results.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: HFR_FSDB_FADB_LTRACE-3-INTERNAL_INIT_FAIL ### Response: (Severity: 3), (Category: FABRIC), (Description: The FSDB FADB ltrace lib failed to initialize the internal ltrace), (Recommended Action: Search the event logs for events/errors related to the failure reason. Ltrace usage is common to overall system. If there are failures here then other processes may also exhibit similar problems. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: How can you configure EPC in Cisco IOS XR? ### Response: To configure EPC in Cisco IOS XR, you need to use the 'monitor capture' command followed by the capture point name and other parameters such as the interface, direction (in or out), and filter conditions. <|EOT|>
<|begin▁of▁sentence|> ### Instruction: NPUXBAR_BRIDGE-1-TSP_A_PKT_LTH_ERR ### Response: (Severity: 1), (Category: PLATFORM), (Description: TSP decoder A length error.), (Recommended Action: None.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: FABARBITER-2-XIF_CNTR_MEM_MBE ### Response: (Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter detected XIF counter memory multi-bit error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: LIBSYSDB-3-LIST_ITEM_COUNT ### Response: (Severity: 3), (Category: SYSDB), (Description: When sysdb get multiple items operation received wrong number of items), (Recommended Action: *SUPPORT*) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: I2C-2-PROXY_ECM_EXIT ### Response: (Severity: 2), (Category: PLATFORM), (Description: The i2c server proxy process ECM failed due to the reason mentioned in the message.), (Recommended Action: None. The ECM will automatically retry the connection until it is successful.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: INSTMGR-4-RESUME_INCOMPLETE_INSTALL ### Response: (Severity: 4), (Category: INSTALL), (Description: An incomplete install was encountered - we will attempt to resume the install.), (Recommended Action: No action is required.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: DUMPER-6-CORE_FILE_NAME_UNAVAIL ### Response: (Severity: 6), (Category: OS), (Description: The core dump file name for this crash is invalid.), (Recommended Action: No action required. Ignore.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: VLANIFMIB-4-GEN ### Response: (Severity: 4), (Category: SNMP), (Description: The VLAN Interface table relationship MIB encountered an internal error during initialisation. It is likely that an SNMP query that was in progress will not have been completed.), (Recommended Action: Retry the operation that caused the message to be displayed. It may help to restart the SNMP process. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: How does Cisco IOS XR support traffic engineering? ### Response: Cisco IOS XR supports traffic engineering through MPLS-TE, allowing for the optimization of network bandwidth usage by directing traffic flows across predetermined paths based on network resource availability and requirements. <|EOT|>
<|begin▁of▁sentence|> ### Instruction: EVPN-4-ODN_ON_UNSUPPORTED_ROUTE ### Response: (Severity: 4), (Category: L2), (Description: On Demand Nexthop (ODN) or Automatic Steering (AS) is only supported on a subset of EVPN Route Types, and only some SR-TE tunnel types are supported. A Segment-Routing Traffic Engineering (SR-TE or SRv6-TE) tunnel was received on an EVPN route which does not support it, and will be ignored.), (Recommended Action: Unconfigure or modify the route-policy coloring (at EVPN evi or BGP neighbour attach point) which results in coloring routes not explicitly supported.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: CFM-6-NV_FABRIC_CHANGE ### Response: (Severity: 6), (Category: L2), (Description: An satellite fabric interface was shut down or brought up by a nV CFM MEP after a fault condition was detected or cleared. The (auto-generated) MEP details can be used to identify the nV CFM MEP in the standard CFM show commands.), (Recommended Action: None.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: FABARBITER-2-QCR_MEM1_MBE ### Response: (Severity: 2), (Category: PLATFORM), (Description: Fabric arbiter detected QCR MEM1 Error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: BRIDGE-1-STATEMC_1_ERR3_3 ### Response: (Severity: 1), (Category: PLATFORM), (Description: State machine - 1 ran into error-3 on bridge instance-3.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: SERVICE_LAYER-3-MPLS_REG_FAIL ### Response: (Severity: 3), (Category: ROUTING), (Description: Service-layer's registration with LSD failed.), (Recommended Action: Service layer's registration with Label Switching Database failed. If this is seen during programming the Service layer, retry registration. If this is seen during recovery from a process restart, look at Service layer traces for more information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: ISIS-3-ERR_BAD_SOCKET_ADDR_LENGTH ### Response: (Severity: 3), (Category: ROUTING), (Description: A packet which IS-IS has received from its network socket contains a socket address with an invalid length. This is an internal software error which indicates that the packet has been corrupted after being received by the local router but before being received by IS-IS. The problematic packet has been dropped. If this is an occasional problem then IS-IS should be able to continue operating normally when the packet is resent. If the message recurs, then IS-IS may start to operate incorrectly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: OFA_GIFT-3-MBR_RETRY_FAIL ### Response: (Severity: 3), (Category: PLATFORM), (Description: The hardware configuration for the Bundle member has reached the maximum number of retries. Hitting this error typically indicates that the member interface has either hit physical interface creation failures, or has not been cleaned up properly.), (Recommended Action: Reload the relevant LC(s) to recover.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: SSE_TCAM_MGR-7-INIT ### Response: (Severity: 7), (Category: L2), (Description: Initialization of SSE TCAM Mgr process has failed due to one of the following reasons: 1) Failed to initialize event manager. This would prevent process from receiving events. 2) Failed to initialize the EDM for the IPv6 Prefix Compresssion Library. 3) Failed to initialize the IPv6 Prefix Compresssion Library itself, which inits the default compression entries. 4) event_block failed. This indicates process has encountered unexpected error while waiting for events.), (Recommended Action: No action is required. Process will be restarted. If not recovered, it's a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: VMANCLNT-3-VMAN_ERROR ### Response: (Severity: 3), (Category: LIB), (Description: Error messages from virtualization manager client library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: SBUS-3-HBM_MBIST_CHANNEL_ERROR ### Response: (Severity: 3), (Category: PLATFORM), (Description: This message indicates possible fault with the NP HBM memory. Displays the channel error associated with the MBIST operation.), (Recommended Action: The line card needs to be returned for repair.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: RDM_LIB-4-HW_READ_FAILED ### Response: (Severity: 4), (Category: PLATFORM), (Description: This is an error message in the RDM lib to indicate that it failed to perform a hw read of specified NPU instance due to the specified reason.), (Recommended Action: This is a fatal error and it wont be recovered automatically. LC need to be reloaded. If the problem persists after the same, call TAC.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: telnet-6-INTF_HANDLE ### Response: (Severity: 6), (Category: IP), (Description: 'Interface lookup failed for source-interface'), (Recommended Action: *SH_TECH*) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: SMS-7-REG_SEC_DEL_FAIL ### Response: (Severity: 7), (Category: SYSDB), (Description: Sysdb is attempting to del a registration that does not exist in its secondary registration context.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: FABIO-7-ERR_SEND_EGRESS_IPSLA_PKT ### Response: (Severity: 7), (Category: PLATFORM), (Description: Internal Error), (Recommended Action: a Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: VTY-3-REGISTRATION ### Response: (Severity: 3), (Category: MGBL), (Description: An unexpected error occurred when the VTY Device DLL asked the TTY Server to perform a TTY management operation.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR* *SUPPORT*) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: TTY_CONNECT-2-UNLOCKING ### Response: (Severity: 2), (Category: MGBL), (Description: The TTY Connection library encountered an unexpected error releasing a lock. To avoid the potential for deadlock the process is aborting.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: IP_TUNNEL-4-DECAP ### Response: (Severity: 4), (Category: FORWARDING), (Description: This message indicates that an error has occurred during packet decapsulation. Particular reason is included in the message.), (Recommended Action: Please contact Cisco TAC and provide this message text as well as the information specified in required_info section.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: SONET_LOCAL-3-MAX_RETRY ### Response: (Severity: 3), (Category: L2), (Description: Pseudo-Wire fault request retries reached to its maximum value. It will display function and line here as well. The message contains info about the location and cause of the failure and possibly anticipated actions/effects.), (Recommended Action: This error indicates a problem in the code and cannot be easily recovered from. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: BGP-5-LSD_CONN_FAIL ### Response: (Severity: 5), (Category: ROUTING), (Description: BGP's connection to the LSD has been lost and the connection will be retried.), (Recommended Action: This message may appear after a router reboot or route-processor fail-over event, or after software maintenance operations. If this message is seen only once, no further corrective action is necessary. If this message continues to appear, please call your Cisco technical support representative.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: BRIDGE-2-XAUI_1_HQ_OFLOW_0 ### Response: (Severity: 2), (Category: PLATFORM), (Description: Queue overflow error on XAUI 1 HQ on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: FSYNC-6-SSM_ST2 ### Response: (Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from ST2.), (Recommended Action: None, this is an informational condition that does not require troubleshooting.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: SHELFMGR-3-UNEXPECTED_EXIT ### Response: (Severity: 3), (Category: PLATFORM), (Description: This message indicates that the Shelf Manager or Platform Manager encountered a critical system(OS) error. It will exit right away.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: FIB-4-LCL_ATTRIB_ENTER_OOR ### Response: (Severity: 4), (Category: ROUTING), (Description: FIB has a limit on the number of local attribute indices it allocates per per table. Check if the maximum number make sense from BGP routes/config.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: OSPFv3-3-IPARM_IF ### Response: (Severity: 3), (Category: ROUTING), (Description: The specified IP/ARM request failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: PUNT_SWITCH-3-LINK_FAIL_8 ### Response: (Severity: 3), (Category: PLATFORM), (Description: PUNT link has failed.), (Recommended Action: Please correct the error by performing card reload using command: 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: TELNETD-3-ERR_TTY_DETAILS ### Response: (Severity: 3), (Category: IP), (Description: An unexpected error occurred when TelnetD tried to retrieve the details of a VTY from a utility library), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: FIA-1-SKT_SP0_INTR_SLICE3_LANE_CRC_ERR_0 ### Response: (Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE3_LANE_CRC_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: ETH_SRVR_API-3-ERR_ORPHAN_COUNT ### Response: (Severity: 3), (Category: PLATFORM), (Description: A partial retrievel of buffers happened for the current process that restarted due to retrieved orphan_count less than actual orphan_count.), (Recommended Action: --) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: OSPF-7-DB_READY_Q ### Response: (Severity: 7), (Category: ROUTING), (Description: An internal software error occurred), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: NP-2-MEMORY_RESOURCE_PROFILE_UNKNOWN ### Response: (Severity: 2), (Category: PLATFORM), (Description: Attempt to retrieve configured memory resource profile from SysDB failed, resulting in activation of the default memory resource profile.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: IP_STATIC-3-RIB_FULL ### Response: (Severity: 3), (Category: ROUTING), (Description: The static routing process failed unexpectedly to update RIB after RIB restarted.), (Recommended Action: Check the routing table to see whether any static routes are missing(Use 'show route {vrf <vrf-name>}').) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: FSYNC-6-SSM_SSUA ### Response: (Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from SSUA.), (Recommended Action: None, this is an informational condition that does not require troubleshooting.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: TUNNEL-3-SYSDB_API_ERR ### Response: (Severity: 3), (Category: PKT_INFRA), (Description: An internal error has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: MPLS_IO-3-ERR_MEM_ALLOC ### Response: (Severity: 3), (Category: ROUTING), (Description: Some error occurred in Alloc/Chunk related memory operations. The text of the message displays the failed operation and the related memory construct. The traceback can be used to get the function/line number of error generating code.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: ETNA-1-ALARM_TX_MODULATOR_BIAS ### Response: (Severity: 1), (Category: PLATFORM), (Description: '.'), (Recommended Action: --) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: SHELFMGRV2-4-LTRACE_INIT_FAIL ### Response: (Severity: 4), (Category: PLATFORM), (Description: This message indicates that ShelfmgrV2 ltrace initialization has failed. Embedded string provides the details of failed function name and the error details.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: IPV6_MA-4-TIMER_INIT_FAILED ### Response: (Severity: 4), (Category: IP), (Description: The IPV6 MA process failed to initialize its timers.), (Recommended Action: Restarting ipv6_ma may fix the issue.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: MKA-4-UNKNOWN_CKN ### Response: (Severity: 4), (Category: L2), (Description: Received MKPDU contains CKN different from the one active on the interface), (Recommended Action: Check the peer end configuration, and confirm both ends have the same CKN, CAK pair configured) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: EMUX-3-RX_PKT_LEN_ERR_FIA11 ### Response: (Severity: 3), (Category: PLATFORM), (Description: Packet length error FIA 11 interface.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: RADIUSD-3-IP_ADDR_TOO_LONG_ERR ### Response: (Severity: 3), (Category: SECURITY), (Description: An internal software error has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: OSPF-3-DUP_RTRID ### Response: (Severity: 3), (Category: ROUTING), (Description: OSPF received hello packet from a neighbor which has the same router-id as this routing process. A full adjacency cannot be established.), (Recommended Action: OSPF router-id should be unique. Change the neighbors router-id.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: PLAT_L2VPN_DEBUG-7-REGISTER_FAILED ### Response: (Severity: 7), (Category: PLATFORM), (Description: Failed to initialize the debugging module in the platform L2VPN component.), (Recommended Action: None, platform software will correct itself if this happens.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: IPV4_MFWD-3-ERR_EVM_CONN_NOTIFY ### Response: (Severity: 3), (Category: ROUTING), (Description: Internal error.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: What are the planes into which the IOS XR architecture is logically divided? ### Response: The IOS XR architecture is logically divided into a management plane, control plane, and data plane. The management plane provides CLI, XML, and SNMP based configuration and monitoring. The control plane runs routing protocols, signaling protocols, and other control functions. The data plane performs packet forwarding in hardware. <|EOT|>
<|begin▁of▁sentence|> ### Instruction: OSPFv3-6-GRACEFUL_SHUTDOWN ### Response: (Severity: 6), (Category: ROUTING), (Description: Informs user of graceful shutdown events. User needs to be aware of these activities.), (Recommended Action: No action required.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: TTY-7-ISSU_LOAD_EXEC ### Response: (Severity: 7), (Category: MGBL), (Description: 'ISSU install notification message for LOAD EXEC Phase received'), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: LI_EA-3-ERR_IM_CAPS ### Response: (Severity: 3), (Category: L2), (Description: 1) Li MD could not be applied to hardware because of one of the following reasons: a) TCAM max limit has been reached. b) RLB resources are not available. This error can happen when a new bundle member is added and the MD can not be programmed successfully.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: RT_PROXY-3-ERR ### Response: (Severity: 3), (Category: L3), (Description: An internal software error occurred that prevented Route proxy from working properly.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: SHELFMGR-6-FABRIC_CARD_RESET_REJECTED ### Response: (Severity: 6), (Category: PLATFORM), (Description: This message indicates that shelf manager can not comply with the fabric software request to reload a failed node due to the reason mentioned in the message. The fabric software is only to request such an action upon fabric card failures that it can not correct without a reload attempt. Reset requests during shelf manager initialization, or if the state of the card does not support such a request are rejected. For example, if the shelfmgr detects the card to be not present, or already IN_RESET due to failed multiple reload recovery attempts, it will reject the request. Similarly, if the node is UNPOWERED or if it is already being reloaded, the request will be rejected.), (Recommended Action: The user can issue a hw-module reload if they desire to reload the fabric card.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: TTY-7-CERRNO ### Response: (Severity: 7), (Category: MGBL), (Description: The TTY Server has failed to register the TTY error codes with the error subsystem.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: NP-3-UIDB_THRESHOLD_WARNING_PER_NP ### Response: (Severity: 3), (Category: PLATFORM), (Description: The UIDB entry utilization for a specific NP on a specific LC has exceeded the default warning threshold (90 %)), (Recommended Action: Limit UIDB usage accordingly. This is a direct result of interface/sub-interface creation, either statically configured by user input or dynamically created by protocol action. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: PA-4-EVENT_REGISTRATION_FAILED ### Response: (Severity: 4), (Category: OS), (Description: The PA process failed while attempting to connect to an event manager channel for the indicated subsystem.), (Recommended Action: Restarting lpts_pa may fix the issue.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: CCV-6-CONFIG_SCRIPT_MODIFIED ### Response: (Severity: 6), (Category: MGBL), (Description: A modification to a currently configured config script was detected, meaning that the script was either created, moved, deleted, or had its contents altered. Unless it can no longer be found, the script will be reloaded. The script will subsequently function as normal, unless the modification introduced any failures, in which case a warning will be output detailing these failures.), (Recommended Action: None, unless the modification was not expected, which must be investigated, or if the modification results in a commit blocker, which must be addressed before further commits are made.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: What are the key components of the IOS XR high availability architecture? ### Response: The key components of the IOS XR HA architecture are\n- Redundant hardware: Includes fans, power, controllers, processors, line cards\n- Process restartability: Critical processes can restart after failure\n- Checkpointing: Allows processes to save state and resynchronize after restart\n- Non-stop forwarding: Packet forwarding continues during control plane failures\n- Graceful restart: Allows routing peers to maintain state across restarts\n- ISSU: Allows software upgrades without traffic loss\"\n <|EOT|>
<|begin▁of▁sentence|> ### Instruction: CCC-2-POWER_FAULT ### Response: (Severity: 2), (Category: DRIVER), (Description: CCC FPGA detected fault on one of the power sequencer device. This is an indication that one of the power rails connected to this power sequencer was detected to have a fault. This will result in card going to POWERED_OFF state, but CCC driver will attempt to recover from this failure by reloadig the card. The card will be placed in POWERED_OFF state if multiple attempts to recover from this failure fails.), (Recommended Action: If multiple card reload operation cannot fix the problem, check if physical OIR can address the problem. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: NPU_DRVR-3-HW_MODULE_PROFILE_PFC_MODE_CHANGE ### Response: (Severity: 3), (Category: FABRIC), (Description: 1. If moving to or from buffer-extended mode, there will be inconsistency between the user config and the hardware. Since the driver in LC has already started the asic initalization process before this config is received. Needs attention with line card reload.), (Recommended Action: System LC is inconsistent. Need to reload the line card for new values to take effect. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: PRP_UPGRADE-3-CONF_SYNC_FAIL ### Response: (Severity: 3), (Category: MGBL), (Description: If the source device boots from a non-default disk disk0 check rommon variable BOOT_DEV_SEQ_OPER on the destination node correct the setting if necessary and retry migration If the problem persists refer to upgrade MOP for more information.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: PLATFORM_LPTS_PIFIB-3-BACKEND_EDM ### Response: (Severity: 3), (Category: OS), (Description: An internal EDM backend function failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: CCTL-3-OBFL_FAIL ### Response: (Severity: 3), (Category: PLATFORM), (Description: The Envmon process failed to log alarms due to the reason mentioned in the message.), (Recommended Action: Collect the logs mentioned in required info Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: BRIDGE-2-XAUI_0_HQ_OFLOW_1 ### Response: (Severity: 2), (Category: PLATFORM), (Description: Queue overflow error on XAUI 0 HQ on bridge instance-1.), (Recommended Action: If the error persists, please reload the board using the command 'hw-module location <> reload'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: BCDL2-3-MSG_NULL_CONTEXT ### Response: (Severity: 3), (Category: OS), (Description: The pointer to the context passed by bcdl_rack_updown_handler was NULL. This can affect inconsistency between BCDL producers and consumers.), (Recommended Action: Contact support.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: ASIC_SCAN_SERVER-2-NODE_BRINGDOWN ### Response: (Severity: 2), (Category: L2), (Description: This is a message in the Asic Scan Server to indicate that it has triggerred a critical alarm and will result in node bringdown. The reason for the failure and the status of the scan operation is reported.), (Recommended Action: Run the board diagnostics.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: SPA_OC3_OC12-3-DRV_INIT_ERR ### Response: (Severity: 3), (Category: L2), (Description: SPA driver encountered the annunciated error during the driver initialization. The System Manager process (sysmgr) will automatically respawn the (spa_oc3_oc12) process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger node reload. After a certain number of node reloads, the shelf manager will permanently shutdown the node.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: FIB-2-SR_TE_GID_EXISTS ### Response: (Severity: 2), (Category: ROUTING), (Description: An SRTE tunnel local label object was created with an existing gid value.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <|EOT|>
<|begin▁of▁sentence|> ### Instruction: BGP-4-POLICY_COMMUNITY_OVERFLOW ### Response: (Severity: 4), (Category: ROUTING), (Description: Policy tried to add more communities than a BGP route can hold.), (Recommended Action: Find the affected neighbor with 'show bgp community truncated'. Modify policy on the affected neighbor to delete unnecessary communities.) <|EOT|>