Input
stringlengths 14
153
| Output
stringlengths 13
151
| Train
stringlengths 95
372
|
---|---|---|
The Fuel Pump Is Adjacent To The Spar. | The fuel pump is beside the spar. | ###Prompt: Convert this sentence to STE guidelines, The Fuel Pump Is Adjacent To The Spar. ###Response: The fuel pump is beside the spar. |
Be Careful Of Dangerous Voltages. | Beware of dangerous voltages. | ###Prompt: Convert this sentence to STE guidelines, Be Careful Of Dangerous Voltages. ###Response: Beware of dangerous voltages. |
Replace All Components That Are Worn More Than The Maximum Limits. | Replace all components that are worn beyond their maximum limits. | ###Prompt: Convert this sentence to STE guidelines, Replace All Components That Are Worn More Than The Maximum Limits. ###Response: Replace all components that are worn beyond their maximum limits. |
Install The Larger Bolts. | Install the bigger bolts. | ###Prompt: Convert this sentence to STE guidelines, Install The Larger Bolts. ###Response: Install the bigger bolts. |
Make Sure That The Valves Move Freely. | Check that valves do not bind. | ###Prompt: Convert this sentence to STE guidelines, Make Sure That The Valves Move Freely. ###Response: Check that valves do not bind. |
Wind Two Layers Of Tape Around The Pipe Joints. | Bind the pipe joints with two layers of tape. | ###Prompt: Convert this sentence to STE guidelines, Wind Two Layers Of Tape Around The Pipe Joints. ###Response: Bind the pipe joints with two layers of tape. |
Put A Cap On The Connector. | Blank the connector. | ###Prompt: Convert this sentence to STE guidelines, Put A Cap On The Connector. ###Response: Blank the connector. |
Put A Cover On The Outlet Port | Blank the outlet port. | ###Prompt: Convert this sentence to STE guidelines, Put A Cover On The Outlet Port ###Response: Blank the outlet port. |
Seal The Hoses. | Blank off the hoses. | ###Prompt: Convert this sentence to STE guidelines, Seal The Hoses. ###Response: Blank off the hoses. |
Cancel The Display. | Blank out the display. | ###Prompt: Convert this sentence to STE guidelines, Cancel The Display. ###Response: Blank out the display. |
Mix The Adhesive With The Hardener. | Blend the adhesive with the hardener. | ###Prompt: Convert this sentence to STE guidelines, Mix The Adhesive With The Hardener. ###Response: Blend the adhesive with the hardener. |
Make Sure That The Sealant Does Not Cause A Blockage Of The Drain. | Check that the sealant does not block the drain. | ###Prompt: Convert this sentence to STE guidelines, Make Sure That The Sealant Does Not Cause A Blockage Of The Drain. ###Response: Check that the sealant does not block the drain. |
Dry The Surface With A Towel. | Blot the surface with a towel. | ###Prompt: Convert this sentence to STE guidelines, Dry The Surface With A Towel. ###Response: Blot the surface with a towel. |
Examine The Static Dischargers For Bent And Blunt Pins. | Inspect the static dischargers for bent and blunted pins. | ###Prompt: Convert this sentence to STE guidelines, Examine The Static Dischargers For Bent And Blunt Pins. ###Response: Inspect the static dischargers for bent and blunted pins. |
Attach The Track To The Channels With The Bolts. | Bolt the track to the channels. | ###Prompt: Convert this sentence to STE guidelines, Attach The Track To The Channels With The Bolts. ###Response: Bolt the track to the channels. |
Attach The Two Ends Of The Hose. | Attach both ends of the hose. | ###Prompt: Convert this sentence to STE guidelines, Attach The Two Ends Of The Hose. ###Response: Attach both ends of the hose. |
Open The Door Until It Touches The Floor. | Open the door until it bottoms on the floor. | ###Prompt: Convert this sentence to STE guidelines, Open The Door Until It Touches The Floor. ###Response: Open the door until it bottoms on the floor. |
Make Sure That The Clearance Is In The Limits. | Make sure that the clearance is in bounds. | ###Prompt: Convert this sentence to STE guidelines, Make Sure That The Clearance Is In The Limits. ###Response: Make sure that the clearance is in bounds. |
Support Struts Hold The Floor Structure In Position. | Support struts brace the floor structure. | ###Prompt: Convert this sentence to STE guidelines, Support Struts Hold The Floor Structure In Position. ###Response: Support struts brace the floor structure. |
Reinforcement Plates Make The Lap Joints Stronger. | Reinforcement plates brace the lap joints. | ###Prompt: Convert this sentence to STE guidelines, Reinforcement Plates Make The Lap Joints Stronger. ###Response: Reinforcement plates brace the lap joints. |
The Pressure Lines Divide In Different Directions. | The pressure lines branch in different directions. | ###Prompt: Convert this sentence to STE guidelines, The Pressure Lines Divide In Different Directions. ###Response: The pressure lines branch in different directions. |
The Width Of The Material Must Be Larger Than 10 Mm. | The breadth of the material must be larger than 10 mm. | ###Prompt: Convert this sentence to STE guidelines, The Width Of The Material Must Be Larger Than 10 Mm. ###Response: The breadth of the material must be larger than 10 mm. |
If The Transmission Stops, Cancel The Test. | If there is a break in the transmission, cancel the test. | ###Prompt: Convert this sentence to STE guidelines, If The Transmission Stops, Cancel The Test. ###Response: If there is a break in the transmission, cancel the test. |
If The Pressure Supply Stops, Cancel The Test. | If there is a breakdown in the pressure supply, cancel the test. | ###Prompt: Convert this sentence to STE guidelines, If The Pressure Supply Stops, Cancel The Test. ###Response: If there is a breakdown in the pressure supply, cancel the test. |
Operate The Dimmer Switch And Make Sure That The Intensity Of The Light Changes. | Operate the dimmer switch and check that the brightness of the light changes. | ###Prompt: Convert this sentence to STE guidelines, Operate The Dimmer Switch And Make Sure That The Intensity Of The Light Changes. ###Response: Operate the dimmer switch and check that the brightness of the light changes. |
Turn The Adjuster Clockwise To Make The Display Brighter. | The display brightness is increased by turning the adjuster clockwise. | ###Prompt: Convert this sentence to STE guidelines, Turn The Adjuster Clockwise To Make The Display Brighter. ###Response: The display brightness is increased by turning the adjuster clockwise. |
Set The Intensity To The Minimum. | Set the brilliance to the minimum. | ###Prompt: Convert this sentence to STE guidelines, Set The Intensity To The Minimum. ###Response: Set the brilliance to the minimum. |
Turn The Brt Control Clockwise To Make The Display Brighter. | To increase the display brilliance, turn the BRT CONTROL clockwise. | ###Prompt: Convert this sentence to STE guidelines, Turn The Brt Control Clockwise To Make The Display Brighter. ###Response: To increase the display brilliance, turn the BRT CONTROL clockwise. |
Move The Panel Into Position. | Bring the panel into place. | ###Prompt: Convert this sentence to STE guidelines, Move The Panel Into Position. ###Response: Bring the panel into place. |
Put The Panel Into Position. | Bring the panel into place. | ###Prompt: Convert this sentence to STE guidelines, Put The Panel Into Position. ###Response: Bring the panel into place. |
Rub The Surface Quickly With A Soft, Dry Cloth. | Rub the surface briskly with a soft, dry cloth. | ###Prompt: Convert this sentence to STE guidelines, Rub The Surface Quickly With A Soft, Dry Cloth. ###Response: Rub the surface briskly with a soft, dry cloth. |
Transmit The Data On The Two Channels. | Broadcast the data on both channels. | ###Prompt: Convert this sentence to STE guidelines, Transmit The Data On The Two Channels. ###Response: Broadcast the data on both channels. |
Use A Brush To Clean The Filter Element. | Brush the filter element to clean it. | ###Prompt: Convert this sentence to STE guidelines, Use A Brush To Clean The Filter Element. ###Response: Brush the filter element to clean it. |
Clean The Filter Element With A Brush. | Brush the filter element to clean it. | ###Prompt: Convert this sentence to STE guidelines, Clean The Filter Element With A Brush. ###Response: Brush the filter element to clean it. |
Apply The Paint With A Brush. | Brush the paint on. | ###Prompt: Convert this sentence to STE guidelines, Apply The Paint With A Brush. ###Response: Brush the paint on. |
The Wing Structure Gives Maximum Fuel Capacity. | The build of the wing allows maximum fuel storage. | ###Prompt: Convert this sentence to STE guidelines, The Wing Structure Gives Maximum Fuel Capacity. ###Response: The build of the wing allows maximum fuel storage. |
Assemble The Unit. | Build the unit. | ###Prompt: Convert this sentence to STE guidelines, Assemble The Unit. ###Response: Build the unit. |
The Fueling Hose Must Not Hit The Edge Of The Tank. | The fueling hose must not bump the edge of the tank. | ###Prompt: Convert this sentence to STE guidelines, The Fueling Hose Must Not Hit The Edge Of The Tank. ###Response: The fueling hose must not bump the edge of the tank. |
If The Disk Breaks, Stop The Supply. | If the disk bursts, switch off the supply. | ###Prompt: Convert this sentence to STE guidelines, If The Disk Breaks, Stop The Supply. ###Response: If the disk bursts, switch off the supply. |
The Wire Must Touch The Rear Of The Contact. | The wire must butt against the rear of the contact. | ###Prompt: Convert this sentence to STE guidelines, The Wire Must Touch The Rear Of The Contact. ###Response: The wire must butt against the rear of the contact. |
Pressurize The System To 150 Bar With The Hand Pump. | By means of the hand pump, pressurize the system to 150 bar. | ###Prompt: Convert this sentence to STE guidelines, Pressurize The System To 150 Bar With The Hand Pump. ###Response: By means of the hand pump, pressurize the system to 150 bar. |
In This Example, We Calculated The Data Applicable Only To A Type B Unit. | The data that we got from the calculations in this example apply only to a Type B unit. | ###Prompt: Convert this sentence to STE guidelines, In This Example, We Calculated The Data Applicable Only To A Type B Unit. ###Response: The data that we got from the calculations in this example apply only to a Type B unit. |
Tell Person A To Remove The Chocks. | Call Person A to remove the chocks. | ###Prompt: Convert this sentence to STE guidelines, Tell Person A To Remove The Chocks. ###Response: Call Person A to remove the chocks. |
Seal All The Hoses. | Cap all the hoses. | ###Prompt: Convert this sentence to STE guidelines, Seal All The Hoses. ###Response: Cap all the hoses. |
Put Caps On The Connectors. | Cap the connectors. | ###Prompt: Convert this sentence to STE guidelines, Put Caps On The Connectors. ###Response: Cap the connectors. |
Put A Cover On The Inlet Port. | Cap the inlet port. | ###Prompt: Convert this sentence to STE guidelines, Put A Cover On The Inlet Port. ###Response: Cap the inlet port. |
These Functions Open The Applicable Graphic Device. | These capabilities open the applicable graphic device. | ###Prompt: Convert this sentence to STE guidelines, These Functions Open The Applicable Graphic Device. ###Response: These capabilities open the applicable graphic device. |
The Computer Can Calculate The Result Automatically. | The computer has the capability to calculate the result automatically. | ###Prompt: Convert this sentence to STE guidelines, The Computer Can Calculate The Result Automatically. ###Response: The computer has the capability to calculate the result automatically. |
An Approved Person Must Do The Important Checks. | Vital checks are to be carried out by a capable person. | ###Prompt: Convert this sentence to STE guidelines, An Approved Person Must Do The Important Checks. ###Response: Vital checks are to be carried out by a capable person. |
The Power Unit Can Supply 28 Vdc. | The power unit is capable of producing 28 VDC. | ###Prompt: Convert this sentence to STE guidelines, The Power Unit Can Supply 28 Vdc. ###Response: The power unit is capable of producing 28 VDC. |
Obey The Safety Precautions When You Do Work With High Voltages. | You must take care when you work with high voltages. | ###Prompt: Convert this sentence to STE guidelines, Obey The Safety Precautions When You Do Work With High Voltages. ###Response: You must take care when you work with high voltages. |
Be Careful When You Install The Nuts. | Take care when installing the nuts. | ###Prompt: Convert this sentence to STE guidelines, Be Careful When You Install The Nuts. ###Response: Take care when installing the nuts. |
Remove The Gearbox Carefully. | Remove the gearbox with great care. | ###Prompt: Convert this sentence to STE guidelines, Remove The Gearbox Carefully. ###Response: Remove the gearbox with great care. |
The Cable Transmits The Electrical Energy From The Ignition Exciter To The Igniter. | The cable carries the electrical energy from the ignition exciter to the igniter. | ###Prompt: Convert this sentence to STE guidelines, The Cable Transmits The Electrical Energy From The Ignition Exciter To The Igniter. ###Response: The cable carries the electrical energy from the ignition exciter to the igniter. |
This Vehicle Is For The Transport Of 5 Passengers. | This vehicle is meant to carry 5 passengers. | ###Prompt: Convert this sentence to STE guidelines, This Vehicle Is For The Transport Of 5 Passengers. ###Response: This vehicle is meant to carry 5 passengers. |
Do The Leak Test. | Carry out the leak test. | ###Prompt: Convert this sentence to STE guidelines, Do The Leak Test. ###Response: Carry out the leak test. |
Measure The Clearance Of The Impeller. | Carry out the clearance measurement of the impeller. | ###Prompt: Convert this sentence to STE guidelines, Measure The Clearance Of The Impeller. ###Response: Carry out the clearance measurement of the impeller. |
Figure 1 Shows The Data For All Operational Conditions. | The data for all operational cases are in shown in Figure 1. | ###Prompt: Convert this sentence to STE guidelines, Figure 1 Shows The Data For All Operational Conditions. ###Response: The data for all operational cases are in shown in Figure 1. |
If There Is A Fire, Operate The Crash Switches. | In case of a fire, operate the crash switches. | ###Prompt: Convert this sentence to STE guidelines, If There Is A Fire, Operate The Crash Switches. ###Response: In case of a fire, operate the crash switches. |
Collect The Leakage In A Graduated Beaker. | Catch the leakage in a graduated beaker. | ###Prompt: Convert this sentence to STE guidelines, Collect The Leakage In A Graduated Beaker. ###Response: Catch the leakage in a graduated beaker. |
The Testing Equipment Divides The Faults Into Categories. | The testing equipment categorizes the faults. | ###Prompt: Convert this sentence to STE guidelines, The Testing Equipment Divides The Faults Into Categories. ###Response: The testing equipment categorizes the faults. |
Tell All Personnel Not To Smoke Near Fuel Tanks. | Caution all personnel not to smoke near fuel tanks. | ###Prompt: Convert this sentence to STE guidelines, Tell All Personnel Not To Smoke Near Fuel Tanks. ###Response: Caution all personnel not to smoke near fuel tanks. |
Carefully Feel The Heater With Your Hands To Make Sure That It Operates. | Cautiously feel the heater with your hands. to make sure that it operates. | ###Prompt: Convert this sentence to STE guidelines, Carefully Feel The Heater With Your Hands To Make Sure That It Operates. ###Response: Cautiously feel the heater with your hands. to make sure that it operates. |
Fill The Hole With Resin. | Fill the cavity with resin. | ###Prompt: Convert this sentence to STE guidelines, Fill The Hole With Resin. ###Response: Fill the cavity with resin. |
Fill The Space Between The Patch And The Adjacent Structure With Sealant. | Fill the cavity between the patch and the adjacent structure with sealant. | ###Prompt: Convert this sentence to STE guidelines, Fill The Space Between The Patch And The Adjacent Structure With Sealant. ###Response: Fill the cavity between the patch and the adjacent structure with sealant. |
The Warning Stops At 17 Deg. | The warning ceases at 17 deg. | ###Prompt: Convert this sentence to STE guidelines, The Warning Stops At 17 Deg. ###Response: The warning ceases at 17 deg. |
Align The Piston With The Center Of The Sleeve. | Center the piston in the sleeve. | ###Prompt: Convert this sentence to STE guidelines, Align The Piston With The Center Of The Sleeve. ###Response: Center the piston in the sleeve. |
Set The Controls To The Center Position. | Centralize the controls. | ###Prompt: Convert this sentence to STE guidelines, Set The Controls To The Center Position. ###Response: Centralize the controls. |
Set The Controls To The Neutral Position. | Centralize the controls. | ###Prompt: Convert this sentence to STE guidelines, Set The Controls To The Neutral Position. ###Response: Centralize the controls. |
If You Are Not Sure That The Results Are Correct, Do The Test Again. | If you are not certain that the results are correct, do the test again. | ###Prompt: Convert this sentence to STE guidelines, If You Are Not Sure That The Results Are Correct, Do The Test Again. ###Response: If you are not certain that the results are correct, do the test again. |
Some Functions Are Not Available. | Certain functions are not available. | ###Prompt: Convert this sentence to STE guidelines, Some Functions Are Not Available. ###Response: Certain functions are not available. |
The Specified Functions Are Not Available. | Certain functions are not available. | ###Prompt: Convert this sentence to STE guidelines, The Specified Functions Are Not Available. ###Response: Certain functions are not available. |
Write The Change In The Logbook. | Certify the change in the logbook. | ###Prompt: Convert this sentence to STE guidelines, Write The Change In The Logbook. ###Response: Certify the change in the logbook. |
Get Approval From Your Supervisor For The Repair. | Get the supervisor to certify the repair. | ###Prompt: Convert this sentence to STE guidelines, Get Approval From Your Supervisor For The Repair. ###Response: Get the supervisor to certify the repair. |
Do Not Let The Wires Rub. | Do not let the wires chafe. | ###Prompt: Convert this sentence to STE guidelines, Do Not Let The Wires Rub. ###Response: Do not let the wires chafe. |
Examine The Tubing For Worn Areas. | Examine the tubing for chafed areas. | ###Prompt: Convert this sentence to STE guidelines, Examine The Tubing For Worn Areas. ###Response: Examine the tubing for chafed areas. |
If There Is A Risk Of Leakage, Put A Container Below The Unit. | If there is a chance of leakage, put a container below the unit. | ###Prompt: Convert this sentence to STE guidelines, If There Is A Risk Of Leakage, Put A Container Below The Unit. ###Response: If there is a chance of leakage, put a container below the unit. |
If The Lever Moved Accidentally, Do The Test Again. | If, by chance, the lever moved, do the test again. | ###Prompt: Convert this sentence to STE guidelines, If The Lever Moved Accidentally, Do The Test Again. ###Response: If, by chance, the lever moved, do the test again. |
Replace The Damaged Valve. | Change the damaged valve. | ###Prompt: Convert this sentence to STE guidelines, Replace The Damaged Valve. ###Response: Change the damaged valve. |
Install The Wires In The Channel Along The Housing. | Channel the wires along the housing. | ###Prompt: Convert this sentence to STE guidelines, Install The Wires In The Channel Along The Housing. ###Response: Channel the wires along the housing. |
The Properties Of These Sealants Prevent Corrosion. | The characteristics of these sealants prevent corrosion. | ###Prompt: Convert this sentence to STE guidelines, The Properties Of These Sealants Prevent Corrosion. ###Response: The characteristics of these sealants prevent corrosion. |
Do Not Use This Material, Because It Does Not Have The Necessary Qualities. | Do not use this material, because it doesn't have the necessary characteristics. | ###Prompt: Convert this sentence to STE guidelines, Do Not Use This Material, Because It Does Not Have The Necessary Qualities. ###Response: Do not use this material, because it doesn't have the necessary characteristics. |
Fill The Tank With 10 Liters Of Methanol. | Charge the tank with 10 liters of methanol. | ###Prompt: Convert this sentence to STE guidelines, Fill The Tank With 10 Liters Of Methanol. ###Response: Charge the tank with 10 liters of methanol. |
Pressurize The Accumulator With Nitrogen. | Charge the accumulator with nitrogen. | ###Prompt: Convert this sentence to STE guidelines, Pressurize The Accumulator With Nitrogen. ###Response: Charge the accumulator with nitrogen. |
Make Sure That It Is Safe To Supply Electrical Power. | Check that it is safe to supply electrical power. | ###Prompt: Convert this sentence to STE guidelines, Make Sure That It Is Safe To Supply Electrical Power. ###Response: Check that it is safe to supply electrical power. |
Measure The Distance Between The Faces. | Check the distance between the faces. | ###Prompt: Convert this sentence to STE guidelines, Measure The Distance Between The Faces. ###Response: Check the distance between the faces. |
Examine The Casting For Corrosion. | Check the casting for corrosion. | ###Prompt: Convert this sentence to STE guidelines, Examine The Casting For Corrosion. ###Response: Check the casting for corrosion. |
Do A Leakage Check Of The Valve. | Check the valve for leakage. | ###Prompt: Convert this sentence to STE guidelines, Do A Leakage Check Of The Valve. ###Response: Check the valve for leakage. |
Examine The Filter Element For Metal Particles. | Examine the filter element for metal chips. | ###Prompt: Convert this sentence to STE guidelines, Examine The Filter Element For Metal Particles. ###Response: Examine the filter element for metal chips. |
If The Enamel Is Damaged, Replace The Unit. | If the enamel is chipped, replace the unit. | ###Prompt: Convert this sentence to STE guidelines, If The Enamel Is Damaged, Replace The Unit. ###Response: If the enamel is chipped, replace the unit. |
Put The Chocks Against The Wheels. | Chock the wheels. | ###Prompt: Convert this sentence to STE guidelines, Put The Chocks Against The Wheels. ###Response: Chock the wheels. |
Make A Selection From The Available Shims To Get The Correct Thickness. | Make a choice from the available shims to get the correct thickness. | ###Prompt: Convert this sentence to STE guidelines, Make A Selection From The Available Shims To Get The Correct Thickness. ###Response: Make a choice from the available shims to get the correct thickness. |
Table 1 Gives Alternative Adhesives Which You Can Use. | In Table 1, there is a choice of adhesives which you are allowed to use. | ###Prompt: Convert this sentence to STE guidelines, Table 1 Gives Alternative Adhesives Which You Can Use. ###Response: In Table 1, there is a choice of adhesives which you are allowed to use. |
Select The Hydraulic System That You Will Pressurize. | Choose the hydraulic system that you will pressurize. | ###Prompt: Convert this sentence to STE guidelines, Select The Hydraulic System That You Will Pressurize. ###Response: Choose the hydraulic system that you will pressurize. |
Put A Container ( Approximately 5 Liters ) Below The Waste Water Outlet. | Put a container ( circa 5 liters ) under the waste water outlet. | ###Prompt: Convert this sentence to STE guidelines, Put A Container ( Approximately 5 Liters ) Below The Waste Water Outlet. ###Response: Put a container ( circa 5 liters ) under the waste water outlet. |
The Pointer Moves Around The Dial. | The pointer circles the dial. | ###Prompt: Convert this sentence to STE guidelines, The Pointer Moves Around The Dial. ###Response: The pointer circles the dial. |
Supply Air At 24 ¡ C To The Area. | Circulate air at 24 ¡ C in the area. | ###Prompt: Convert this sentence to STE guidelines, Supply Air At 24 ¡ C To The Area. ###Response: Circulate air at 24 ¡ C in the area. |
Attach The Adjacent Cables With Clamps. | Clamp the adjoining cables together. | ###Prompt: Convert this sentence to STE guidelines, Attach The Adjacent Cables With Clamps. ###Response: Clamp the adjoining cables together. |
Put Clamps On The Cable To Hold It In Position. | Clamp the cable in position. | ###Prompt: Convert this sentence to STE guidelines, Put Clamps On The Cable To Hold It In Position. ###Response: Clamp the cable in position. |
There Are Four General Classes Of Fasteners. | Fasteners can be separated into four general classifications. | ###Prompt: Convert this sentence to STE guidelines, There Are Four General Classes Of Fasteners. ###Response: Fasteners can be separated into four general classifications. |