Input
stringlengths
14
153
Output
stringlengths
13
151
Train
stringlengths
95
372
Make Sure That The Tank Is In An Open Area That Has A Good Airflow.
Make sure that the tank is in an area that is vented to the atmosphere.
###Prompt: Convert this sentence to STE guidelines, Make Sure That The Tank Is In An Open Area That Has A Good Airflow. ###Response: Make sure that the tank is in an area that is vented to the atmosphere.
Make Sure That The Area Where You Will Use This Solvent Has Good Airflow.
Ventilate the area where this solvent is used.
###Prompt: Convert this sentence to STE guidelines, Make Sure That The Area Where You Will Use This Solvent Has Good Airflow. ###Response: Ventilate the area where this solvent is used.
Make Sure That The Airflow Is Sufficient.
Make sure that the ventilation is sufficient.
###Prompt: Convert this sentence to STE guidelines, Make Sure That The Airflow Is Sufficient. ###Response: Make sure that the ventilation is sufficient.
Tell The Chief About The Results.
Give a verbal message about the results to the chief.
###Prompt: Convert this sentence to STE guidelines, Tell The Chief About The Results. ###Response: Give a verbal message about the results to the chief.
Make Sure That A Person Who Is Not In The Tank Can Always Hear You.
Make sure that you maintain verbal contact with an operator outside the tank.
###Prompt: Convert this sentence to STE guidelines, Make Sure That A Person Who Is Not In The Tank Can Always Hear You. ###Response: Make sure that you maintain verbal contact with an operator outside the tank.
Make Sure That The Fittings Are Tight.
Verify the tightness of fittings.
###Prompt: Convert this sentence to STE guidelines, Make Sure That The Fittings Are Tight. ###Response: Verify the tightness of fittings.
Get Access Through The No. 6 Break - In Panel.
Get access via No. 6 break - in panel.
###Prompt: Convert this sentence to STE guidelines, Get Access Through The No. 6 Break - In Panel. ###Response: Get access via No. 6 break - in panel.
If There Is Vibration In The Unit, Disconnect The Power Supply.
If the unit vibrates, cut the power.
###Prompt: Convert this sentence to STE guidelines, If There Is Vibration In The Unit, Disconnect The Power Supply. ###Response: If the unit vibrates, cut the power.
Make Sure That Solvents Are Not Near The Engine Exhaust.
Make sure that solvents are not in the vicinity of the engine exhaust.
###Prompt: Convert this sentence to STE guidelines, Make Sure That Solvents Are Not Near The Engine Exhaust. ###Response: Make sure that solvents are not in the vicinity of the engine exhaust.
Do An Inspection Of The Damage And Of The Adjacent Area.
Do an inspection of the damage and of the immediate vicinity.
###Prompt: Convert this sentence to STE guidelines, Do An Inspection Of The Damage And Of The Adjacent Area. ###Response: Do an inspection of the damage and of the immediate vicinity.
The Bolt Will Be At The 2 O'Clock Position When Seen From The Rear.
The bolt will be at 2 o'clock when viewed from the rear.
###Prompt: Convert this sentence to STE guidelines, The Bolt Will Be At The 2 O'Clock Position When Seen From The Rear. ###Response: The bolt will be at 2 o'clock when viewed from the rear.
The Bolt Will Be At The 2 O'Clock Position When You Look At The Pump From The Rear.
The bolt will be at 2 o'clock when viewed from the rear.
###Prompt: Convert this sentence to STE guidelines, The Bolt Will Be At The 2 O'Clock Position When You Look At The Pump From The Rear. ###Response: The bolt will be at 2 o'clock when viewed from the rear.
When You Clean The Carpet, Do Not Use Too Much Force On The Brush. Too Much Force Can Cause Damage To The Carpet.
Vigorous cleaning with a brush can cause damage to the carpet.
###Prompt: Convert this sentence to STE guidelines, When You Clean The Carpet, Do Not Use Too Much Force On The Brush. Too Much Force Can Cause Damage To The Carpet. ###Response: Vigorous cleaning with a brush can cause damage to the carpet.
When You Move The Control Wheel, Do Not Apply Too Much Force.
Do not move the control wheel too vigorously.
###Prompt: Convert this sentence to STE guidelines, When You Move The Control Wheel, Do Not Apply Too Much Force. ###Response: Do not move the control wheel too vigorously.
Make Sure That You Can See The Oil Level Through The Sight Gauge.
Make certain that the oil level is visible through the sight gauge.
###Prompt: Convert this sentence to STE guidelines, Make Sure That You Can See The Oil Level Through The Sight Gauge. ###Response: Make certain that the oil level is visible through the sight gauge.
When The Indicator Comes Into View, Stop The Pump.
When the indicator is visible, stop the pump.
###Prompt: Convert this sentence to STE guidelines, When The Indicator Comes Into View, Stop The Pump. ###Response: When the indicator is visible, stop the pump.
After The Test, It Is Important To Set The Indicator Back To Zero.
It is vital to set the indicator back to zero after the test.
###Prompt: Convert this sentence to STE guidelines, After The Test, It Is Important To Set The Indicator Back To Zero. ###Response: It is vital to set the indicator back to zero after the test.
After The Test, It Is Mandatory To Set The Indicator Back To Zero.
It is vital to set the indicator back to zero after the test.
###Prompt: Convert this sentence to STE guidelines, After The Test, It Is Mandatory To Set The Indicator Back To Zero. ###Response: It is vital to set the indicator back to zero after the test.
After The Test, It Is Necessary To Set The Indicator Back To Zero.
It is vital to set the indicator back to zero after the test.
###Prompt: Convert this sentence to STE guidelines, After The Test, It Is Necessary To Set The Indicator Back To Zero. ###Response: It is vital to set the indicator back to zero after the test.
Be Careful With The Solvent Near Flames Or Sparks. This Solvent Can Release Flammable Fumes.
Be careful with the solvent ( this solvent is volatile and can be dangerous ).
###Prompt: Convert this sentence to STE guidelines, Be Careful With The Solvent Near Flames Or Sparks. This Solvent Can Release Flammable Fumes. ###Response: Be careful with the solvent ( this solvent is volatile and can be dangerous ).
Make The Mixture Warm Before You Use It.
Warm the mixture before use.
###Prompt: Convert this sentence to STE guidelines, Make The Mixture Warm Before You Use It. ###Response: Warm the mixture before use.
Tell Personnel To Stay Away From The Conveyor System.
Warn personnel to stay away from the conveyor system.
###Prompt: Convert this sentence to STE guidelines, Tell Personnel To Stay Away From The Conveyor System. ###Response: Warn personnel to stay away from the conveyor system.
If The Instructions Give A Warning About Dangerous Pressure, Do Not Open The Container.
If the instructions warn of a dangerous pressure, do not open the container.
###Prompt: Convert this sentence to STE guidelines, If The Instructions Give A Warning About Dangerous Pressure, Do Not Open The Container. ###Response: If the instructions warn of a dangerous pressure, do not open the container.
Clean Your Hands With Soap.
Wash your hands using soap.
###Prompt: Convert this sentence to STE guidelines, Clean Your Hands With Soap. ###Response: Wash your hands using soap.
Monitor The Speed Indication Continuously Until The End Of The Test.
Watch the speed indication for the duration of the test.
###Prompt: Convert this sentence to STE guidelines, Monitor The Speed Indication Continuously Until The End Of The Test. ###Response: Watch the speed indication for the duration of the test.
Look For Air Bubbles.
Watch for air bubbles.
###Prompt: Convert this sentence to STE guidelines, Look For Air Bubbles. ###Response: Watch for air bubbles.
Make Sure That The Tank Is Sealed.
Check that the tank is watertight.
###Prompt: Convert this sentence to STE guidelines, Make Sure That The Tank Is Sealed. ###Response: Check that the tank is watertight.
Do Not Use Other Procedures To Replace The Unit.
Do not use other ways to replace the unit.
###Prompt: Convert this sentence to STE guidelines, Do Not Use Other Procedures To Replace The Unit. ###Response: Do not use other ways to replace the unit.
There Is A Weak Point In The Strut.
There is a point of weakness in the strut.
###Prompt: Convert this sentence to STE guidelines, There Is A Weak Point In The Strut. ###Response: There is a point of weakness in the strut.
During The Soldering Procedure, Use A Protective Shield.
During the soldering procedure, wear a protective shield.
###Prompt: Convert this sentence to STE guidelines, During The Soldering Procedure, Use A Protective Shield. ###Response: During the soldering procedure, wear a protective shield.
Put On Protective Clothing When You Use The Solvent.
Wear protective clothing when you use the solvent.
###Prompt: Convert this sentence to STE guidelines, Put On Protective Clothing When You Use The Solvent. ###Response: Wear protective clothing when you use the solvent.
If There Is Fuel Leakage From The Couplings, Repair Them.
If there are fuel weeps from the couplings, repair them.
###Prompt: Convert this sentence to STE guidelines, If There Is Fuel Leakage From The Couplings, Repair Them. ###Response: If there are fuel weeps from the couplings, repair them.
Make Sure That The Bearing Is Correctly Installed.
bearing is well seated. Make sure that the
###Prompt: Convert this sentence to STE guidelines, Make Sure That The Bearing Is Correctly Installed. ###Response: bearing is well seated. Make sure that the
There Must Be A Good Airflow In The Work Area.
The work area must be well ventilated.
###Prompt: Convert this sentence to STE guidelines, There Must Be A Good Airflow In The Work Area. ###Response: The work area must be well ventilated.
All Laboratory Equipment Must Be Fully Cleaned.
All laboratory equipment must be well cleaned.
###Prompt: Convert this sentence to STE guidelines, All Laboratory Equipment Must Be Fully Cleaned. ###Response: All laboratory equipment must be well cleaned.
Stop The Test When The Pressure Is More Than 7000 Kpa.
Stop the test whenever the pressure is more than 7000 kPa.
###Prompt: Convert this sentence to STE guidelines, Stop The Test When The Pressure Is More Than 7000 Kpa. ###Response: Stop the test whenever the pressure is more than 7000 kPa.
This Limit Is Applicable If The Aircraft Is On The Landing Gear Or On Jacks.
This limit applies whether the aircraft is on the landing gear or on jacks.
###Prompt: Convert this sentence to STE guidelines, This Limit Is Applicable If The Aircraft Is On The Landing Gear Or On Jacks. ###Response: This limit applies whether the aircraft is on the landing gear or on jacks.
Use The Adhesive That Is Available.
Use whichever adhesive is available.
###Prompt: Convert this sentence to STE guidelines, Use The Adhesive That Is Available. ###Response: Use whichever adhesive is available.
Do Not Open The Housing While The Electrical Power Is Connected.
Do not open the housing whilst the electrical power is connected.
###Prompt: Convert this sentence to STE guidelines, Do Not Open The Housing While The Electrical Power Is Connected. ###Response: Do not open the housing whilst the electrical power is connected.
All Persons Who Are In This Area Must Use A Respirator.
Whoever is in this area must use a respirator.
###Prompt: Convert this sentence to STE guidelines, All Persons Who Are In This Area Must Use A Respirator. ###Response: Whoever is in this area must use a respirator.
Do The Full Procedure.
The whole procedure must be done.
###Prompt: Convert this sentence to STE guidelines, Do The Full Procedure. ###Response: The whole procedure must be done.
Examine All Of The System To Find The Cause Of Interference.
Examine the whole system to find the cause. of interference.
###Prompt: Convert this sentence to STE guidelines, Examine All Of The System To Find The Cause Of Interference. ###Response: Examine the whole system to find the cause. of interference.
The System Is Fully Automatic.
The system is wholly automatic.
###Prompt: Convert this sentence to STE guidelines, The System Is Fully Automatic. ###Response: The system is wholly automatic.
The Generators Supply A Three- Phase Voltage. The Frequency Of This Voltage Increases When The Generator Rotor Speed Increases.
The generators produce a three - phase voltage whose frequency is proportional to the generator rotor speed.
###Prompt: Convert this sentence to STE guidelines, The Generators Supply A Three- Phase Voltage. The Frequency Of This Voltage Increases When The Generator Rotor Speed Increases. ###Response: The generators produce a three - phase voltage whose frequency is proportional to the generator rotor speed.
When There Are Strong Winds, Obey These Special Precautions.
Take special precautions in very windy conditions.
###Prompt: Convert this sentence to STE guidelines, When There Are Strong Winds, Obey These Special Precautions. ###Response: Take special precautions in very windy conditions.
Before Each Cycle, Clean The Indicator.
Wipe the indicator surfaces before each cycle.
###Prompt: Convert this sentence to STE guidelines, Before Each Cycle, Clean The Indicator. ###Response: Wipe the indicator surfaces before each cycle.
Attach The Hose To The Fixture With Wire.
Wire the hose to the fixture.
###Prompt: Convert this sentence to STE guidelines, Attach The Hose To The Fixture With Wire. ###Response: Wire the hose to the fixture.
Lock The Four Bolts To Each Other With Lockwire.
Wire - lock the four bolts to each other.
###Prompt: Convert this sentence to STE guidelines, Lock The Four Bolts To Each Other With Lockwire. ###Response: Wire - lock the four bolts to each other.
Safety The Four Bolts To Each Other With Safety Wire.
Wire - lock the four bolts to each other.
###Prompt: Convert this sentence to STE guidelines, Safety The Four Bolts To Each Other With Safety Wire. ###Response: Wire - lock the four bolts to each other.
Remove The Indicator From The Instrument Panel.
Withdraw the indicator from the instrument panel.
###Prompt: Convert this sentence to STE guidelines, Remove The Indicator From The Instrument Panel. ###Response: Withdraw the indicator from the instrument panel.
A Filter Prevents Contamination Of The Components In The System.
A filter prevents contamination of the components within the system.
###Prompt: Convert this sentence to STE guidelines, A Filter Prevents Contamination Of The Components In The System. ###Response: A filter prevents contamination of the components within the system.
Light L4 Comes On In 5 Seconds Or Less.
Light L4 illuminates within 5 seconds.
###Prompt: Convert this sentence to STE guidelines, Light L4 Comes On In 5 Seconds Or Less. ###Response: Light L4 illuminates within 5 seconds.
Make Sure That The Warning Light Comes On In Less Than 3 Seconds.
Make sure that the warning light illuminates within 3 seconds.
###Prompt: Convert this sentence to STE guidelines, Make Sure That The Warning Light Comes On In Less Than 3 Seconds. ###Response: Make sure that the warning light illuminates within 3 seconds.
This Material Is Resistant To Fire.
This material can withstand fire.
###Prompt: Convert this sentence to STE guidelines, This Material Is Resistant To Fire. ###Response: This material can withstand fire.
Be Careful When You Do Work Near Fuel Tanks.
Be careful when you work near fuel tanks.
###Prompt: Convert this sentence to STE guidelines, Be Careful When You Do Work Near Fuel Tanks. ###Response: Be careful when you work near fuel tanks.
Solvents That Stay On The Part Can Cause Corrosion.
Solvents left on the part would corrode the part.
###Prompt: Convert this sentence to STE guidelines, Solvents That Stay On The Part Can Cause Corrosion. ###Response: Solvents left on the part would corrode the part.
Put The Part In Oilpaper.
Wrap the part in oilpaper.
###Prompt: Convert this sentence to STE guidelines, Put The Part In Oilpaper. ###Response: Wrap the part in oilpaper.
Wind Masking Tape Around The Part.
Wrap masking tape around the part.
###Prompt: Convert this sentence to STE guidelines, Wind Masking Tape Around The Part. ###Response: Wrap masking tape around the part.
Identify The Bellcrank And Shaft With Marks. This Will Prevent An Incorrect Installation.
Mark the bellcrank and shaft to prevent wrong installation.
###Prompt: Convert this sentence to STE guidelines, Identify The Bellcrank And Shaft With Marks. This Will Prevent An Incorrect Installation. ###Response: Mark the bellcrank and shaft to prevent wrong installation.
If The Hoses Are Incorrectly Installed, Damage Can Occur.
Damage can occur if hoses are wrongly installed.
###Prompt: Convert this sentence to STE guidelines, If The Hoses Are Incorrectly Installed, Damage Can Occur. ###Response: Damage can occur if hoses are wrongly installed.
Tighten The Nuts, But Keep Them Sufficiently Loose To Remove Them With Your Hand.
The nuts should be tightened, yet loose enough to remove by hand.
###Prompt: Convert this sentence to STE guidelines, Tighten The Nuts, But Keep Them Sufficiently Loose To Remove Them With Your Hand. ###Response: The nuts should be tightened, yet loose enough to remove by hand.
Do Not Remove The Fixture Cover At This Time.
Do not remove the fixture cover yet.
###Prompt: Convert this sentence to STE guidelines, Do Not Remove The Fixture Cover At This Time. ###Response: Do not remove the fixture cover yet.
Do Not Use Your Hands To Prevent Movement Of The Lp Compressor. If You Do, The Lp Compressor Can Cause You Injury And Can Cause Damage To The Equipment.
Do not use your hands to prevent movement of the LP compressor. If you do, you can cause injury to yourself and damage to the equipment.
###Prompt: Convert this sentence to STE guidelines, Do Not Use Your Hands To Prevent Movement Of The Lp Compressor. If You Do, The Lp Compressor Can Cause You Injury And Can Cause Damage To The Equipment. ###Response: Do not use your hands to prevent movement of the LP compressor. If you do, you can cause injury to yourself and damage to the equipment.
Adjust The Meter To Zero.
Zero the meter.
###Prompt: Convert this sentence to STE guidelines, Adjust The Meter To Zero. ###Response: Zero the meter.