input
stringlengths 46
1.34k
| output
stringclasses 188
values |
|---|---|
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "improve
improves the wrapper surface quality based on skewness, size change, or aspect ratio." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "inflate-thin-regions
pushes apart the overlapping faces in thin regions." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "post-single-surface
cleans up unmerged island regions after recovering the single surface." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "recover-single-surface
recovers thin surfaces as a single surface after wrapping." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "41
Release 2019 R3 - © ANSYS, Inc." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "All rights reserved." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "- Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.
recover-zone
separates the wrapper surface into zones based on the original geometry." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "remove-crossover-config
removes crossover configurations." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "remove-duplicated-nodes
removes the duplicate nodes on the wrapper surface." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "rename-wrapper-zones
renames the wrapper zones by specifying an appropriate prefix instead of the default prefix (wrap-).
resolve-nonmanifoldness
resolves non-manifold configurations on the wrapper surface." | 4 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "resolve-self-intersection
removes the self intersecting faces." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "rezone
smooths the zones separated from the wrapper surface for better representation of the geometry." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "smooth-folded-faces
smooths the folded faces on the wrapper surface." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "smooth-wrapper-surf
smooths the wrapper surface." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "swap-wrapper-surf
swaps the nodes of the wrapper surface to improve its quality." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "pre-smooth?
enables/disables smoothing of nodes during wrapping." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "This command is available only after initializing
the Cartesian grid.
region/
enters the regions menu." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "This command is available only after initializing the Cartesian grid.
draw-holes
draws the holes detected." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "delete-interface
deletes the existing interface." | 4 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "extract-enclosing-region
extracts the interface for the region enclosing the specified point.
extract-interface
extracts the interfaces for the specified regions.
fix-holes
fixes the specified hole(s).
list-holes
lists the existing holes." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Release 2019 R3 - © ANSYS, Inc." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "All rights reserved." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "- Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.
42
boundary/
list-interfaces
lists the existing interfaces.
list-regions
lists the regions created during the wrapper initialization." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "merge-interior-regions
merges all the interior regions." | 5 |
After using this command, two regions will remain, the exterior
and the merged interior region.
Given the context: What will happen to the other regions? | They will disappear |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "merge-regions
merges the specified regions." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "modify-region-holes
enables you to fix or open holes related to the specified region." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "open-holes
opens the specified hole(s)." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "refine
refines the Cartesian grid based on the zone specific sizes and local size functions." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "This command
is available only after initializing Cartesian grid." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "refine-enclosing-region
refines the region enclosing the specified point.
refine-region
refines the specified region." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "refine-zone-cells
refines the cells associated with the specified boundary zone." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "This command is available only after
initializing the Cartesian grid.
update-regions
updates the regions to account for the changes made to the original geometry (during manual
hole fixing)." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "wrap-enclosing-region
generates the wrapper surface for the region enclosing the specified point.
wrap-interface
generates the wrapper surface for the specified interface.
wrap-region
generates the wrapper surface for the specified region." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "This command is available only after initial-
izing the Cartesian grid.
wrapper-region-at-location
reports the region at the specified location." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "set/
enters the menu to set cell parameters." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "auto-draw-sizes
enables you to draw zone-specific sizes." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "43
Release 2019 R3 - © ANSYS, Inc." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "All rights reserved." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "- Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "clear-size
clears all the zone specific size parameters." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "curvature-factor
enables you to modify curvature size function sensitivity of a wrapper." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "curvature?
enables you to enable or disable curvature size function." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "default-face-size
enables you to specify default face size for Cartesian grid." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "feature-threshold
enables you to specify critical range within which the nodes of the wrapper will be projected onto
the feature edges." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "ignore-feature-skewness
specifies the critical skewness to be considered for ignoring feature lines." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "ignore-self-proximity?
enables/disables the self-proximity calculation during the refinement.
list-size
lists the current zone specific sizes of the domain." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "local-size-function
enables you to set local size functions." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "max-refine-level
specifies the maximum refinement level permitted." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "maximum-size-level
specifies the refinement level of the largest cell in the Cartesian grid." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "minimum-proximity-gap
specifies the minimum proximity gap within which the proximity will be ignored." | 4 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "minimum-size-level
specifies the refinement level of the smallest cell in the Cartesian grid." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "number-of-size-boxes
controls the number of boxes to display, when using Draw Sizes button in the Face Size tab.
proximity-factor
enables you to modify proximity size function sensitivity of a wrapper." | 4 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "proximity?
enables/disables proximity size function." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "read-local-sizes
reads the zone specific sizes stated in a file." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "refinement-buffer-layers
specifies the number of additional cell layers that you want to refine." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Release 2019 R3 - © ANSYS, Inc." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "All rights reserved." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "- Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.
44
boundary/
relative-island-count
specifies a critical cell count of noise zones in a zone separation." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "volume-marker
offers a volume marker manipulation for holes." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "write-local-sizes
writes the zone specific sizes in a file." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "zone-specific-size
enables you to specify zone specific sizes." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "45
Release 2019 R3 - © ANSYS, Inc." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "All rights reserved." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "- Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Release 2019 R3 - © ANSYS, Inc." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "All rights reserved." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "- Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.
46
Chapter 2: cad-assemblies/
add-prefix
enables you to add a prefix to the selected entities." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Specify the path for the entities and the prefix to be
added.
add-to-object
enables you to add the selected CAD entities to an existing object." | 3 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Specify the path for the entities to be
added and select the object to be modified.
create-objects
enables you to create new geometry/mesh objects for the selected entities." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Specify the path for the entities
and if required, choose to create one object per CAD entity selected and/or retain the CAD zone granularity
for object creation." | 3 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "By default, a single object will be created for all entities selected and the CAD zone
granularity will not be retained." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Specify the object name (if applicable), object type (geom or mesh), and
cell zone type (dead, fluid, or solid)." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "delete-cad-assemblies
deletes all the CAD assemblies data." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "draw
displays the selected CAD entities." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "draw-options/
contains additional options for displaying CAD entities." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "add-to-graphics
adds the selected entities to the display in the graphics window." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "draw-unlabelled-zones
displays the unlabeled zones for the selected entities in the graphics window." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "remove-from-graphics
removes the selected entities from the display in the graphics window." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "extract-edge-zones
enables you to extract the feature edge zone for the selected entities." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Specify the path for the CAD entities
and the feature angle." | 3 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "labels/
contains options for displaying and managing labels." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "add-to-graphics
adds the selected labels to the display in the graphics window." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "delete
deletes the selected labels." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "47
Release 2019 R3 - © ANSYS, Inc." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "All rights reserved." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "- Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "draw
displays the selected labels." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "remove-from-graphics
removes the selected labels from the display in the graphics window." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "rename
enables you to rename the selected labels." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Specify the path for the labels and the new name." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "For
multiple selections, the specified name will be used, with a suitable index as suffix." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "For example, spe-
cifying a new label name wall will result in entities wall.1, wall.2, etc.
manage-state/
contains options for setting the CAD entity state." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "suppress
suppresses the selected CAD entities." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "unlock
unlocks the selected CAD entities." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "unsuppress
unsuppresses the selected CAD entities." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "rename
enables you to rename the selected entities." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Specify the path for the entities and the new name." | 4 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "For multiple
entities, the specified name will be used, with a suitable index as suffix." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "For example, specifying a new
name wall will result in entities wall.1, wall.2, etc.
replace-object
enables you to replace an object with the selected CAD entities." | 5 |