input
stringlengths 46
1.34k
| output
stringclasses 188
values |
|---|---|
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Additionally, specify whether the current boundary face zones
should be replaced by the remeshed face zones after the operation is complete." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Release 2019 R3 - © ANSYS, Inc." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "All rights reserved." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "- Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.
36
boundary/
remesh-face-zones-conformally
remeshes face zones using the current size function and keeping a conformal interface between them." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "If no size function is defined, an error message will be generated." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "This command will prompt for:
• Boundary Face Zones
• Boundary Edge Zones
• feature angle – used to determine the minimum angle between features that will be
preserved during remeshing
• corner angle – used to specify the minimum angle between feature edges that will be
preserved
• Replace Face Zone?" | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "– (default is Yes) the remeshed face zone(s) will take the name and
-id of the original zones, and the original face zone(s) will have “orig” appended to their name." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "If No, the remeshed face zone(s) will have “retri” added postfix." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Note
Periodic face zones cannot be remeshed using this command." | 4 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "remesh-overlapping-zones
remeshes overlapping face zones." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "The non-overlapping region is remeshed using the edge loops created
from the overlapping face zones." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "size-functions
enters the size functions menu where you can define size functions for controlling mesh size distribution." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "compute
computes the size field based on the defined parameters." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "contours/
contains options for displaying contours of size functions." | 4 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "draw
displays contours in the graphics window." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Compute the size field using /size-func-
tions/compute or read in a size field file prior to displaying the contours of size." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "set/refine-facets?
enables you to specify smaller facets if the original are too large." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Default is no.
create
defines the size function based on the specified parameters.
create-defaults
creates default size functions based on face and edge curvature and proximity." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "delete
deletes the specified size function or the current size field." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "37
Release 2019 R3 - © ANSYS, Inc." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "All rights reserved." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "- Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "delete-all
deletes all the defined size functions." | 1 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "disable-periodicity-filter
removes periodicity from the size field." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "list
lists all the defined size functions and the parameter values defined." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "reset-global-controls
resets the global controls to their default values." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "set-global-controls
sets the values for the global minimum and maximum size, and the growth rate." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "set-periodicity-filter
applies periodicity to the size field by selecting one source face zone." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Note
Ensure that periodicity is previously defined." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Only rotational periodicity is supported, translational periodicity is not supported
currently." | 3 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "set-prox-gap-tolerance
sets the tolerance relative to minimum size to take gaps into account." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Gaps whose thickness is less
than the global minimum size multiplied by this factor will not be regarded as a proximity gap.
set-scaling-filter
specifies the scale factor, and minimum and maximum size values to filter the size output from
the size field." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "triangulate-quad-faces?
identifies the zones comprising non-triangular elements and uses a triangulated copy of these
zones for computing the size functions." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "use-cad-imported-curvature?
enables/disables curvature data from the nodes of the CAD facets." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "stitch-all-face-zones
connects (stitches) all the face zones along the free edges." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "After the stitch operation, remesh is called automatically." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "To disable the post-remesh operation,
use the text command:
/boundary/remesh/controls/intersect/remesh-post-intersection?" | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "no
stitch-face-zones
connects two surfaces along their free edges." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "After the stitch operation, remesh is called automatically." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "To disable the post-remesh operation,
use the text command:
Release 2019 R3 - © ANSYS, Inc." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "All rights reserved." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "- Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "38
boundary/
/boundary/remesh/controls/intersect/remesh-post-intersection?" | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "no
stitch-with-preserve-boundary
connects (stitches) a zone to another which is connected to an existing volume mesh, while preserving
the boundary of the zones connected to the volume mesh." | 5 |
Specify a list of boundary zones to be
preserved, a list of the boundary zones to be connected to each of these zones, and the tolerance
value.
Given the context: What will happen after the boundary zones are preserved? | The boundary zones will be connected |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "After the stitch operation, remesh is called automatically." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "To disable the post-remesh operation,
use the text command:
/boundary/remesh/controls/intersect/remesh-post-intersection?" | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "no
Note
This command will not work for overlapping or partially overlapping face zones." | 3 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "triangulate
triangulates quad zones." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "reset-element-type
resets the element type (mixed, tri, or quad) of a boundary zone." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "If you have separated a mixed (tri and
quad) face zone into one tri face zone and one quad face zone, for example, each of these will be identified
as a “mixed" zone." | 5 |
Resetting the element type for each of these new zones will identify them as, respectively,
a triangular zone and a quadrilateral zone.
resolve-face-intersection
resolves self intersection on manifold surface meshes.
Having read that, I wonder What is the purpose of the program? | to help identify elements |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "scale-nodes
applies a scaling factor to all node coordinates." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "You can use this command to change the units of the grid." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "separate/
contains options for separating face zones.
local-regions
enters the local refinement menu." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "define
enables you to define the local region." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "delete
deletes the specified local region." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "init
creates a region encompassing the entire geometry." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "list-all-regions
lists all the local regions defined." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "mark-faces-in-region
marks the faces that are contained in a specified local refinement region." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "39
Release 2019 R3 - © ANSYS, Inc." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "All rights reserved." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "- Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "sep-face-zone-by-angle
separates a boundary face zone based on significant angle." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "sep-face-zone-by-cnbor
separates a boundary/interior face zone based on its cell neighbors." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "sep-face-zone-by-mark
separates a boundary face zone by moving marked faces to a new zone." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "sep-face-zone-by-region
separates a boundary face zone based on contiguous regions." | 4 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "sep-face-zone-by-seed
separates a boundary face zone by defining a seed face on the surface." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "sep-face-zone-by-seed-angle
separates faces connected to the seed face, whose normal fall within the specified cone." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "sep-face-zone-by-shape
separates a boundary face zone based on the shape of the faces (triangular or quadrilateral)." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "set-periodicity
defines the periodicity parameters." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "You will be prompted for the type of periodicity (rotational or
translational)." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "For rotational periodicity, you will be prompted for the angle and axis of rotation
parameters." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "For translational periodicity, you will be prompted for the shift vector components." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "slit-boundary-face
slits a boundary face zone by duplicating all faces and nodes, except those nodes that are located at the
edges of the boundary zone." | 5 |
I heard that A displacement can be specified to provide thickness to the boundary.
And I was wondering What can be specified to provide thickness to the boundary? | a displacement |
The
slit command only works when it is possible to move from face to face using the connectivity provided by
the cells.
Given the context: What does the slit command do? | it allows you to move from face to face |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "You should slit the boundary face after you generate the volume mesh so that cells will not be
placed inside the gap." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "There may be some inaccuracies when you graphically display solution data
for a mesh with a slit boundary in ANSYS Fluent.
smooth-marked-faces
smooths the marked faces." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "unmark-selected-faces
unmarks the marked selected faces." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "wrapper/
enters the surface wrapper menu." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Note
This menu is no longer supported, and will be removed in a future release." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "delete-all-cells?
deletes the Cartesian mesh." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "This command is available only after initializing the Cartesian grid." | 4 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Release 2019 R3 - © ANSYS, Inc." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "All rights reserved." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "- Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.
40
boundary/
imprint-edges?
imprints the wrapper surface on recovered feature edges that you recover." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "This command is available
only after creating the wrapper surface." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "initialize
creates a Cartesian mesh of the specified parameters." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "local-regions/
enters the local refinement menu." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "define
enables you to define the local refinement region." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "delete
deletes the specified refinement region." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "init
creates a region encompassing the entire geometry." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "list-all-regions
lists all the refinement regions in the console." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "refine
refines the specified region according to the refinement parameters specified." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "post-improve
enters the wrapper surface improvement options menu.
auto-post-improve
improves the wrapper surface using a pre-defined sequence of operations." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "auto-post-wrap
performs a pre-defined sequence of post-wrapping operations on the wrapper surface." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "coarsen-wrapper-surf
coarsens the wrapper surface." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "filterout-far-features
deletes feature edges beyond the specified distance from the wrapper surface." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "imprint-geom-surf
imprints the geometry threads on wrapper (manual zone recovery)." | 5 |