input
stringlengths 46
1.34k
| output
stringclasses 188
values |
---|---|
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "text command, in which case additional information is printed for escaped
particles, such as per-injection data." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Note that, for unsteady particle tracking, it is necessary to enable the
report/dpm-zone-summaries-per-injection?" | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "text command before any particle parcels are
injected into the domain." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "dpm-histogram/
Enters the DPM histogram menu.
compute-sample
Computes the minimum/maximum of a sample variable." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "delete-sample
Deletes a sample from the loaded sample list." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "list-samples
Shows all samples in a loaded sample list." | 4 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "pick-sample-to-reduce
Select a sample to be reduced." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "plot-sample
Plots a histogram of a loaded sample." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "read-sample
Reads a sample file and adds it to the sample list." | 4 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "reduce-picked-sample
Reduce a sample as specified by the data reduction parameters." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "This command is available only after
you selected the sample using the pick-sample-to-reduce text command.
set/
Enters the settings menu for the histogram." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "auto-range?
Automatically computes the range of the sampling variable for histogram plots.
correlation?" | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Computes the correlation of the sampling variable with another variable." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "341
Release 2019 R3 - © ANSYS, Inc." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "All rights reserved." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "- Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates." | 1 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "cumulation-curve?
Computes a cumulative curve for the sampling variable or correlation variable when correla-
tion?" | 1 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "is specified." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "diameter-statistics?
Computes the Rosin Rammler parameters, Sauter, and other mean diameters." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "histogram-mode?
Uses bars for the histogram plot or xy-style.
logarithmic?
Enables/disables the use of logarithmic scaling on the abscissa of the histogram." | 4 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "maximum
Specifies the maximum value of the x-axis variable for histogram plots." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "minimum
Specifies the minimum value of the x-axis variable for histogram plots." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "number-of-bins
Specifies the number of bins." | 4 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "percentage?
Uses percentages of bins to be computed.
variable^3?
Uses the cubic of the cumulation variable during computation of the cumulative curve." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "weighting?" | 3 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Uses weighting with additional variables when sorting data into samples." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "write-sample
Writes a histogram of a loaded sample into a file." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "setup-reduction/
Enters the settings menu for the sample data reduction." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "This command is available only after you se-
lected the sample using the pick-sample-to-reduce text command.
all-variables-number-of-bins
Sets the number of bins to be used for all variables in the data reduction.
list-settings
Prints all current sample data reduction settings for all variables in the selected sample in the
console." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "logarithmic?
Enables/disables the logarithmic scaling for a selected variable." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "make-steady-from-unsteady-file?
Enables/disables the unsteady sample reduction into a steady-state injection file." | 4 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "This command
is available only for sample files from unsteady particle tracking." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "maximum
Sets the maximum value of the range to be considered for a specific variable." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Release 2019 R3 - © ANSYS, Inc." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "All rights reserved." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "- Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "342
report/
minimum
Sets the minimum value of the range to be considered for a specific variable." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "number-of-bins
Sets the number of bins for a specific variable." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "reset-min-and-max
Resets the specified maximum and minimum values for a specific variable." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "use-weighting?
Enables/disables the use of weighting in the data averaging in each bin.
weighting-variable
Sets the weighting variable for the data averaging in each bin.
dpm-sample
Samples trajectories at boundaries and lines/planes." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "dpm-sample-output-udf
Allows you to hook a previously loaded DEFINE_DPM_OUTPUT UDF for file format specification for
sampling of trajectories and VOF-to-DPM lump conversion transcripts." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "dpm-sample-sort-file?" | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Enables/disables writing of sorted DPM sample files." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "dpm-summary
Prints discrete phase summary report." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "dpm-zone-summaries-per-injection?
Enables/disables calculation of the escaped mass per injection." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Note that for unsteady particle tracking, if
you want to report the mass of escaped particles per injection, this text command must be enabled before
any particles are injected into the domain." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "element-mass-flow
Prints list of element flow rate at inlets and outlets." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "This reports the mass flow rates of all chemical elements
(in kg/s) flowing through the simulation boundaries.
fluxes/
Enters the fluxes menu.
film-heat-transfer
Prints wall film heat transfer rate at boundaries." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "This text command is only available when you enable
the Eulerian wall film model." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "film-mass-flow
Prints wall film mass flow rate at boundaries." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "This text command is only available when you enable
the Eulerian wall film model.
heat-transfer
Prints heat transfer rate at boundaries.
heat-transfer-sensible
Prints the sensible heat transfer rate at the boundaries." | 4 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "343
Release 2019 R3 - © ANSYS, Inc." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "All rights reserved." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "- Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.
mass-flow
Prints mass flow rate at inlets and outlets.
rad-heat-trans
Prints radiation heat transfer rate at boundaries." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "forces/
Enters the forces menu.
pressure-center
Prints the center of pressure on wall zones.
wall-forces
Computes the forces along the specified force vector for all wall zones.
wall-moments
Computes the moments about the specified moment center for all wall zones." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "heat-exchanger/
Enters the heat exchanger menu.
computed-heat-rejection
Prints total heat rejection." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "inlet-temperature
Prints inlet temperature." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "outlet-temperature
Prints outlet temperature." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "mass-flow-rate
Prints mass flow rate.
specific-heat
Prints fluid’s specific heat." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "mphase-summary
Prints summary report for a multiphase case setup." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "particle-summary
Prints summary report for all current particles.
path-line-summary
Prints pathline summary report." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "print-histogram
Prints a histogram of a scalar quantity." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "projected-surface-area
Computes the area of the projection of selected surfaces along the ,
, or axis." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "reference-values/
Enters the reference value menu." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "Release 2019 R3 - © ANSYS, Inc." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "All rights reserved." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "- Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates." | 1 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "344
report/
area
Sets reference area for normalization." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "compute/
Computes reference values from zone boundary conditions." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "density
Sets reference density for normalization." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "depth
Sets reference depth for volume calculation." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "enthalpy
Sets reference enthalpy for enthalpy damping and normalization." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "length
Sets reference length for normalization." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "list
Lists current reference values." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "pressure
Sets reference pressure for normalization." | 4 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "temperature
Sets reference temperature for normalization." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "velocity
Sets reference velocity for normalization." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "viscosity
Sets reference viscosity for normalization." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "zone
Sets reference zone." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "species-mass-flow
Prints list of species mass flow rate at inlets and outlets." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "This reports the mass flow rates of all species (in
kg/s) flowing through the simulation boundaries." | 4 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "summary
Prints the current settings for physical models, boundary conditions, material properties, and solution
parameters." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "surface-integrals/
Enters the surface integral menu.
area
Prints the area of the selected surfaces." | 4 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "area-weighted-average
Prints area-weighted average of the specified quantity over the selected surfaces." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "facet-avg
Prints the facet average of the specified quantity over the selected surfaces." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "345
Release 2019 R3 - © ANSYS, Inc." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "All rights reserved." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "- Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "facet-max
Prints the maximum of the specified quantity over facet centroids of the selected surfaces." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "facet-min
Prints the minimum of the specified quantity over facet centroids of the selected surfaces.
flow-rate
Prints the flow rate of the specified quantity over the selected surfaces." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "integral
Prints the integral of the specified quantity over the selected surfaces." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "You can include a wildcard (*)
within the surface names." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "mass-flow-rate
Prints the mass flow rate through the selected surfaces." | 4 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "mass-weighted-avg
Prints the mass-averaged quantity over the selected surfaces.
standard-deviation
Prints the standard deviation of the scalar at the facet centroids of the surface." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "sum
Prints sum of scalar at facet centroids of the surfaces." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "uniformity-index-area-weighted
Prints the area-weighted uniformity index of the specified quantity over the selected surfaces." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "uniformity-index-mass-weighted
Prints the mass-weighted uniformity index of the specified quantity over the selected surfaces." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "vector-based-flux
Prints the vector-based flux of the specified quantity over the selected surfaces." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "vector-flux
Prints the vector flux over the selected surfaces." | 5 |
On a scale of 1-5 (with 1 being least favorable and 5 being most favorable), how would you rate this review? "vector-weighted-average
Prints the vector-averaged quantity over the selected surfaces." | 5 |