Datasets:

crumb

/

c4-benchfilter-nano

like 3

From the DJFL HOME Page, click on Edit My Account at the bottom of the left hand menu. Follow the instructions on the next page and then click on your name to edit your information. Make sure the check box "no emails" is NOT checked and make sure all the email addresses you want to receive notices in are there. Put a semicolon and space between email addresses. Be sure to click on the Submit button when you are done. Ideally, you want to add BOTH parents when setting up the player account. To add a guardian later, scroll to the bottom of a player record (see above for the Edit My Account instructions) and click on the box “clone as adult” and then enter the name of the guardian, cell phone and email address (and any other information that is different from the player. You can delete the DOB and Grade). Be sure to click on the Submit button when you are done. 4-Be sure that the "NO EMAILS" box is NOT checked off.

An update on the graceful and unique antelope species native to Africa. The Antelopes all have in common their deer-like features, smooth hair and horns, and sophisticated ability to run up to 25 meters per second. All Antelopes have permanently attached horns, and in the cases of some species, such as the Greater Kudu, these horns are easily distinguishable and twist in interesting spiral shapes. In other species, the horns grow in wide curves and have a sharp point at the end. Unlike deer, Antelopes do not shed their horns each year. Most of the 91 species of antelope are native to Africa and live primarily in plains or grassland, or are indigenous to various regions of Eurasia. However, there are other species that have lived in or been introduced to other habitats. The Gemsbok species, for example, which live primarily in the desert, have recently been introduced to the Tularosa Basin in the United States. As far as their diet goes, Antelopes in general thrive off of grass, shoots, and seeds, and are hunted by the lion, cheetah, and crocodile. To avoid predators, many Antelopes gather in large herds to rely on numbers and good hearing for protection, or simply use dense bush as cover. Unfortunately, many species of this beautiful animal are dying out due to shrinking habitats caused by human activity, poaching, and natural predation. Humans have hunted the Greater Kudu, a species prized for its horns and meat, to near extinction. The horns poached by humans are then used as containers or musical instruments. Much of the Greater Kudu’s population has also been taken over for farming purposes and charcoal burning. The Gemsbok species of antelope, known for the white patches on their legs that look like socks, are not threatened so far, but face a similar fate as the Greater Kudu population as they are hunted by humans who wish to possess their horns. If this continues, the Gemsbok species could become threatened or face extinction much like the Greater Kudu is now. Like the Gemsbok population, the Springbok antelope species, a medium sized antelope found in South Africa, are classified as a thriving species with no risk of extinction. In fact, the Springbok antelope species is considered to be expanding. However, like the Gemsbok or Greater Kudu species, the Springbok species are hunted by humans for its coat. The export of Springbok skins is a large industry across parts of Namibia and South Africa. The skins are then used for taxidermy. Springbok meat is also considered valuable, and is routinely sold in South African markets. Right now, many organizations such as the African Wildlife Foundation are working to help critical species, such as the Greater Kudu with projects put in place to restore the Kudu’s habitat. For example, planting trees in forested ecosystem or proper planning of new projects to ensure a balance between human modernity and conversation of Grater Kudu habitats. Although the Springbok species and the Gemsbok species are classified as Least Concern and do not face immediate danger regarding the survival of their species, it is important that the hunting of these species is regulated to ensure that they will not fall into a threatened status or face extinction in the future. Antelopes play an important role in the ecosystems they are a part of. Like many other species, they help maintain biodiversity, which ensures sustainability for all organisms in the ecosystem. The natural predators that feed off of antelopes, for example, would lose their source of food. And without any antelopes to keep the plant population in check with their diet, there would be an overabundance of those same plant species which antelopes normally eat. It is clear that the removal of antelopes would cause catastrophic consequences for these ecosystems across multiple levels of the food chain. For the sake of this species, it is important to preserve their living space, and for humans to regulate or outlaw the hunting of Antelope horns, meat, and skin. There is still hope for the Greater Kudu. The Gemsbok, Springbok, and Blesbok antelope species, on the other hand, should ideally continue to grow and thrive as they are now. Helping is easy. Click the antelope below to make a donation!

This is a dazzling beaded form fitting bodice dress with spaghetti straps. Beads run from one side of the dress to the bottom of the other ending with a pleated waistline. Dress falls right above the knees with a bubble skirt bottom and has a zip up back. Ideal for prom, homecoming, wedding, graduation and other special occasions!

Also in today's log, multiple thefts from vehicles, assault with a knife and neighbor disputes. 7:50 a.m. Theft was reported in the 200 block of Second Avenue where jewelry and a cellphone were taken from a parked vehicle sometime overnight. 10:44 a.m. Theft was reported in the first block of West Hanover Street where a cellphone was taken from a parked vehicle. 11:50 a.m. Suspicious male subject was reported soliciting money in the first block of Carlisle Street the previous day. 12:35 p.m. No injuries were reported and towing was not required following a crash in the first block of Kindig Lane. An unknown truck tractor and trailer combination struck a railroad crossing sign owned by CSX and left the scene. 1:24 p.m. Disturbance involving a verbal argument between two men was reported in the first block of Carlisle Street. 5:26 p.m. No injuries were reported and towing was required following a crash at Charles Street and East Elm Avenue. A 1999 Ford Explorer operated by a Hanover juvenile struck a 2012 Volvo S60 operated by Marilee Barger. 8:30 p.m. Disturbance involving loud music was reported in the first block of Baltimore Street. 8:46 a.m. No injuries were reported and towing was not required following a crash in the 1000 block of Carlisle Street. A 1992 GMC Jimmy operated by Ronald Harris, of Hanover, struck a 2005 Dodge Ram 1500 operated by Dovall Brown, of Thomasville. 10:26 a.m. Domestic argument between a mother and a son was reported in the 100 block of Fulton Street. 1:18 p.m. Disturbance reported at a business in the 100 block of East Chestnut Street was unfounded. 2:50 p.m. Criminal mischief was reported in the 500 block of Baltimore Street where a fire extinguisher was discharged inside a building. 3:23 p.m. A charge of simple assault is pending against a 24-year-old man, of Hanover, following an altercation with another man in the first block of Stock Street. 4:01 p.m. Domestic argument between a man and a woman was reported in the first block of Baltimore Street. 5:52 p.m. Theft of traps was reported in the 400 block of Eisenhower Drive. 6:12 p.m. Theft of money was reported taken from a purse found in the 1100 block of Carlisle Street. 12:55 a.m. Domestic argument between a man and a woman was reported in the first block of Mitchell Court. 2:30 a.m. Harassment between three women was reported in the first bock of West Walnut Street. 5:08 a.m. Domestic argument between a man and a woman was reported in the first block of Mitchell Court. 1:05 p.m. Theft of lawn ornaments was reported in the 600 block of Moul Avenue. 1:52 p.m. No injuries were reported and towing was required following a crash in the 600 block of East Middle Street. A 2002 Chevrolet Blazer operated by Darryl Trone, of Hanover, struck a 2001 Jeep Wrangler operated by Paul Harbold Jr., of Hanover. 2:55 p.m. A charge of harassment is pending against a 40-year-old man, of Hanover, following a domestic altercation reported in the 400 block of Locust Street. 4:05 p.m. Domestic argument between a man and a woman was reported in the 300 block of McKinley Avenue. 4:25 p.m. Missing person was reported in the 300 block of North Franklin Street involving a 14-year-old runaway juvenile who later returned home. 4:59 p.m. Melissa Lacy, 33, of Hagerstown, Maryland, was cited for retail theft following an incident of shoplifting reported at a business in the 400 block of Eisenhower Drive. 5:19 p.m. Domestic argument between several family members was reported in the 600 block of East Walnut Street. 7:03 p.m. Domestic argument between a man and a woman was reported in the 200 block of York Street. 7:23 p.m. Disturbance involving disorderly juveniles was reported at a business in the 100 block of Eisenhower Drive. 7:48 p.m. Disturbance involving a verbal argument between a man and a woman was reported in the 500 block of North Franklin Street. 8:56 p.m. Domestic argument between a man and a woman was reported in the 400 block of High Street. 9:54 p.m. Assault was reported in the 100 block of Baltimore Street where a male victim was cut by a knife during a fight with another man. The victim refused to cooperate with the investigation. 10:41 p.m. Domestic argument between a man and a woman was reported in the first block of Fourth Street. 11:47 p.m. Domestic argument between a man and a woman was reported in the 100 block of Carlisle Street. 2:54 a.m. Report of a suspicious vehicle that was occupied in the 800 block of West Alvin Street. It was located and checked out OK. 11:23 a.m. A 24-year-old woman was arrested on outstanding warrants following a vehicle stop in the 500 block of Baltimore Street. Noon Report of a neighbor dispute in the first block of Narrow Road about brush placed in the road. 4:10 p.m. A pedestrian advised police that she was bumped by a passing vehicle in alley in the 900 block of Baltimore Street. No injuries were reported. 5:45 p.m. Report of an intoxicated driver in the 1000 block of York Street. The driver was located and checked out OK. 5:45 p.m. Christina Kucharczyk, 34, was arrested for public drunkenness following an incident in the 1000 block of York Street. 7:40 p.m. Report of a neighbor dispute about children in neighbor's yards in the 100 block of West Timber Lane. 8:36 p.m. Police assisted Hanover Borough Police with serving a warrant in the 300 block of Manor Street. 9:41 p.m. A 20-year-old man was arrested on a bench warrant in the 200 block of Bowman Road. 11 p.m. Report of dogs barking in the first block of Allen Drive. They were quiet on police arrival. 11:57 p.m. Police assisted West Manheim Township Police with a traffic stop at Baltimore Street and Brunswick Drive. 2:20 a.m. A 26-year-old woman was arrested following a vehicle stop for DUI in the 1200 block of York Street. 5:55 a.m. Report of a tall, thin male looking into cars in the 100 block of Lion Drive. He was not located. 7 a.m. Complaint of a neighbor working on his deck at 5:30 a.m. in the 100 block of Pheasant Run Lane. 10 a.m. Theft of jewelry from vehicle in the 1400 block of Baltimore Street was reported. 5:39 p.m. A 52-year-old woman was arrested on outstanding warrants in the 500 block of Balimore Street following a vehicle stop. 6:16 p.m. Report of two males yelling in an alley in the first block of West Granger Street. They were not located. 7:53 p.m. Report of a hit-and-run to a street sign on Park Heights Boulevard at Boundary Avenue. 2:29 a.m. Report of a loud party in the first block of Stuart Avenue. Police located four people in a backyard talking. They were advised to keep the peace. 7:18 a.m. Report of items stolen from a vehicle in the 800 block of West Middle Street. 8:17 a.m. Report of a one-vehicle crash at York Street and Route 216. One minor injury was reported. A 34-year-old man was arrested for DUI as a result of the crash. 5:29 p.m. A 45-year-old woman was arrested for DUI at Grandview Road and York Street. 6:28 p.m. A glass door to a home in the 1300 block of Baltimore Street was found shattered.

They say a 28-year-old man died as a result of the collision on Route 202 around 7 a.m. "It appeared that one of the cars crossed over the double yellow line, striking one of the other vehicles. You would expect that two cars - even if they were traveling at 30 mph - that's a 60 mph combined speed. The damage is pretty severe," says Lt. Tom Gentner, of the Yorktown police. Police say the victim was taken to the hospital, where he was pronounced dead. The driver of the other vehicle was also injured, but the extent of those injuries is not currently known. Route 202 was temporarily closed from Pinebrook Court to Lexington Avenue during the investigation.

While the I Ching has been used as a form of general divination for thousands of years, it is also excellent for probing specific topics in detail. Of course, no topic interests most of us more than our loves, friendships and their future course. To see what the I Ching has to say about your social life, enter your name in the textbox below (optional) and select “Throw My Coins.” We hope your cast is a good one!

You learned that a lot of data are being collected and used within the healthcare sector in order to treat patients as well as for medical research purposes. As long as the personal health data can be used to identify a natural person, like Anna, the GDPR applies. For treating a patient it is important that the right health data is connected to the right patient. This means that in this context, health data cannot be anonymised. Anonymisation means that personal data can no longer identify a natural person. The GDPR however also mentions another safeguard: pseudonymisation. Article 4 (5) GDPR explains what is meant by pseudonymisation in light of the GDPR. It means that the processing of personal data cannot be linked to a natural person on its own, addition information is needed to identify a person. It is important that the additional information is kept separately and that technical and organisational measures have been taken to ensure that this information cannot be attributed to a natural person. This means that pseudonymised data can be used to treat a patient and helps keep the data safe against unauthorised access. For research purposes it is not always necessary to attribute personal data to a natural person, meaning that more drastic measures can be taken. This is why research data can, most of the time, be anonymised. We heard Anna’s research nurse explain that her health data is anonymised before it is transferred to another research institution. The difference between pseudonymisation and anonymisation is that pseudonymised personal data can still, by using addition information, be used to identify a natural person. Anonymised data can never be used to identify a natural person, not even with addition information. The conclusion that can be drawn from this is that anonymised data does not need to comply with the GDPR, considering that the risks to the fundamental rights and freedoms of a natural person no longer exist. When anonymising data it is however important to make sure that it is truly anonymised. With modern technologies, a lot of information is available and combining different data sets, makes it sometimes possible to re-identify a natural person in an anonymised data set. In 2015 Latanya Sweeney published an article which proved that she was able to re-identify anonymised datasets which she bought from a hospital, by comparing the dataset to newspaper stories in the same year. By using this technique she was able to identify 43% of the people in the anonymised dataset. This research showed that it is almost impossible to really anonymise data. If data is not anonymised, the risks to the fundamental rights and freedoms of a natural person are still present, and the GDPR applies. If you have not done so already, you can read Latanya Sweeney’s entire article called ‘Only You, Your Doctor, and Many Others May Know’ from Technology Science, via this link.

You can see that all of these methods by Sound Proofing Guys in Center, NE offer varying degrees of separation of the drywall on one side from the drywall on the other side. Again, all of the walls shown are superior to a single stud (common) wall. For a full explanation on Soundproofing call Sound Proofing Guys in Center, NE on 800-593-3340 and get the best advice around. Trust the experts in Soundproofing in the Center, NE area.

There are different styles of freestyle and frontcrawl. Mark favours a more open water and triathlon swim stroke, whereas Heather favours a pool stroke. Which is more efficient and which stroke should you be using in your next triathlon? So what is the difference between Mark and Heather's front crawl strokes? The over the water recovery phase has the most notable contrast. In the pool stroke, the elbow typically exits the water before the hand, and then it's fingers first as the hand enters the water. An open water stroke tends to be quicker, has a straighter arm recovery and is similar to a windmill action. Which stroke do you use?

5 Bedroom Detached House For Sale in London for Guide Price £2,500,000. A large, detached, double-fronted family home and stunning garden, situated on a quiet, residential street in the Westcombe Park Conservation Area. You cannot help but be astonished as you enter this pristine four/five bedroom, four bathroom architect-designed house. From the spacious hallway you look up to a large double height skylight in the vaulted roof space; straight ahead you glimpse a green expanse of garden through the glass doors of the kitchen/diner. The house has been designed to maximise the sense of openness, light and space, and the glass doors, glass stair panels and windows serve to enhance this. On the ground floor there is a dual aspect lounge/dining room with contemporary gas fire, feature wall and doors to a balcony. Also on this floor is a gym, which could be used as a bedroom, a WC and access to the integral garage. A few short steps lead to a lower level where there is a light-filled study and utility room on one side, and a shower room on the other. Further steps bring you to a beautiful white tiled contemporary kitchen/diner/living space with sky lights. The kitchen is made up of high gloss units topped with granite work surfaces, integrated appliances and a central island with breakfast bar. There is space for a large dining table as well as a comfortable family space. Bi folding doors stretch the width of the house to reveal the garden, focal point of the whole house. The garden is breath-taking, full of plants, shrubs and trees, and must be one of the widest, lovingly kept and perhaps the prettiest that we have seen to date in the area. There is a large stone patio directly accessed from the kitchen, and a smaller one accessed from the study. The four double bedrooms are on the first floor of the house. One is being used as a dressing room, one has an en-suite bathroom and another has its own dressing room. There are two further large Duravit bathrooms, one with walk-in shower and one with bath and shower, all with under floor heating and speakers built into the ceilings. There is off street parking for one or two vehicles and a single garage. There is access to the garden from both sides of the house.

Keeping your gaming character invisible forever will not be possible in Rules Of Survival game. Also, punching your opponents is not going to work for long. Your strategies will work sometimes and for the rest of the times, you will need an appropriate weapon. There are innumerable weapons accessible in the game and among them the most powerful ones are the sniper rifles and assault rifles. In the beginning, you will not be able to find the best weapons; gradually you will be able to pick good ones. Always keep looking for them and until you find good weapons, use the ones that you have acquired, carefully and accurately. You will come across several occasions where you can acquire weapons, so do not pick those that you cannot use in the game. For instance; handguns will seem to be a good choice; but, nothing can be better than an assault rifle. It is always better to spray bullets on the enemies rather than aiming precisely to shoot! It is the area that is loaded with innumerable weapons and equipments. Most of the gamers are aware of the area, so you are certainly not going to be the only one reaching there. Before you actually head off for Rust Bay, ensure that you are ready for combat as acquiring weapons is not going to be easy. Search any structure you come across out there and you are surely going to find ammo, gear, and weapons + plenty of enemies. Bitter Lake is located in the center and is the largest area on the map. As it is laden with innumerable buildings, so finding weapons and equipments becomes a bit easier. You can hide behind the buildings and wait till the opponents come close to you so that you can take them by surprise. All buildings located here are filled with several powerful weapons, so you are surely going to grab some good stuff out here. The Training Base is a small area, which is close to Bitter Lake. Here, you can easily find weapons as well as vehicles. Through the risk is high out here, so are the rewards! You should plan in such a way that you get in and get out quickly from the Training Base by acquiring some good weapons. Other than the aforesaid areas, you can even plan to land on Safe Store and Research Edifice areas to loot some high-damage weapons. Wherever you choose to go for collecting weapons, ensure that you do not remain without weapons for a long time. Your opponents are going to have plenty of weapons, so if you want to stay safe then you need to acquire some arms as quickly as possible. Make use of the above areas and obtain several weapons and equipments so that you can survive for long in your favorite game and if you want to make things easier do not hesitate to try our Rules Of Survival Hack 2018.

​As architects, we're particularly bound by the laws of thermodynamics. Heat transfers through our walls, through our floors and into our bodies, affecting the thermal comfort of the space and the overall energy use of the building. These laws define the fundamental qualities that define physical systems in buildings, chemical bonds, and the earths atmosphere. no heat will flow between any two bodies that are at the same temperature. Matter is always seeking equilibrium. Moisture also moves from high to low, which defines the vapor profile in a building. That being said, heat also moves from hottest to coldest. Take a boil pot of water, for example. When you drop spaghetti into the water, the water immediately stops boiling. It's not because the spaghetti cooled the water so much that it's below boiling temperature, it's because the heat of the stove immediately transfers to the coldest thing - the spaghetti. Once the noodles match the temperature of the water, only then will the pot continue to boil. The human body sweats. The transfer of moisture from inside to outside the body is most effective when air transfers that moisture away from your skin through convection. According to the laws above though, air will only transfer this moisture when the surrounding air is not fully saturated. That is why evaporative cooling works in a dry climate, but not in a humid climate - there's nowhere for that water to go! In class the other day, Shanelle picked up a stainless steel spoon in one hand and a canvas pencil bag in the other. She was asked to decide which item was colder. After a bit of deliberating, she decided that the spoon felt colder at first, but soon felt warmer. In fact, both the spoon and the pencil bag were the same temperature - room temperature. What Shanelle experienced was heat being transfered from her hand via conduction. Since the metal is more conductive than the canvas bag, it removes heat from her hand. In fact, we don't really comprehend heat until there is a temperature differential. Why do we give marathon runners metal blankets after they finish their race? A runners body will continue to emit heat (through radiation) and perspire (through evaporation) even hours after the race. The "blanket" serves to keep the runners heat close to their body even after the activity has stopped to prevent hypothermia. The R-value of a material is an indicator of its ability to resist or retard heat transfer in a given thickness of material. A high R-value is indicative of a insulative material (low conduction) while a low R-value indicates a more conductive material). In calculating the total R-value of a multi-layered assembly, the individual R-values are added together to form the nominal or rated R-value, essentially forming the best case scenario. Typical material R-values can be found in the ASHRAE Handbook of Fundamentals and a few of them can be found here (above left). When choosing insulation materials, it is also important to consider the embodied energy that goes into producing the materials. 3. Calculate the temperature difference between each material. Divide the R-value of the material (Rmat) by the total nominal R-value (Rtot) and multiply by the temperature difference. To retard the flow of heat: introduce voids or microscopic pockets of air. Air is a gas, and its atoms are spaced, on average, further apart than they are in solids. Air can act as an insulator — but only if it remains stagnant. What is a thermal bridge?... and why do I care? The thermal image shown here is Jeanne Gang's Aqua Tower in Chicago, IL, which has become the poster child for thermal bridging. Here, the concrete slabs are extended beyond the thermal envelope (largely glass), transferring a huge amount of energy between inside and out. ​Thermal heat transfer can be easily calculated at the one-dimensional scale, however this method does not account for thermal interactions between systems, such as between windows and walls. Two-dimensional thermal modeling tools, such as Lawrence Berkeley National Lab’s (LBNL) Therm, are used to digitally simulate heat transfer through building assemblies. This is helpful to identify thermal bridges or locate the dew point within the assembly. With this information, the designer can determine where to locate thermal breaks, add insulation, or even feed the results into an energy model for more accurate results. These conditions can create cold or hot spots within an assembly that may radiate to the interior space, creating opportunities for occupant discomfort. Extreme temperature differentials within an otherwise uniform assemebly create prime opportunities for condensation to form when the material temperature is below the dewpoint of the air. This can lead to mold if the material is not able to dry thoroughly or material failure if the material is not able to tolerate moist conditions. The project shown here, located in Italy, had a significant condensation problem along the perimeter concrete beam at the intersection of the wall and roof in the attic. Though this is not a conventional detail seen in the US, the concrete beam was more conductive than the brick masonry, so a thermal bridge was created. The concrete beam was required for seismic purposes. Not only did the thermal bridge likely increase mechanical conditioning demands, it created a cold spot which impacted the thermal comfort within the space. Additionally, the lower internal temperatures allowed condensation to form and the sustained conditions (and lack of drying) permitted mold to form. Though thermal bridging does not always lead to interior mold issues, it is most common in buildings that are not properly ventilated (Bonilauri 2016). ​​The Werner Otto Hall at the Busch Reisinger Museum located at Harvard University, shown below, is a token example of building failure due to poor detailing, particularly poor air sealing and thermal bridging. In fact, the building only lasted 19 years – it was constructed in 1991 and demolished in 1991. The curators of the museum required that the interior air be kept at 70F and 50% RH to maintain the health of the artwork. In addition, the building was pressurized so that air would only leak out, and never in from outside. Over time, cold, moist air leaked into the cavity during winter months and condensed. During the cold Boston winter, the condensation coming from the humid interior air would sometimes freeze. Adding to the problem, the exterior metal panels were connected to the framing with galvanized ties which rusted and deteriorated. Had the ties been stainless steel, though more expensive, the attachments would have been less susceptible to damage from moisture. Over time, the panels began to fall off the building and onto the sidewalk.Even beore that, there were other visible symptoms that began to appear. There was moisture accumulating in the roof, icicles along the bottom of the parapet, wet stains on the limestone façade, rust spots along the metal wall panels and staining from the glass block windows. Upon first trying to diagnose the problem, the first thought was that the air and vapor barrier had been punctured, potentially by the curators when trying to hang the art. The museum hired Simpson Gumpertz & Heger (SGH) to investigate the problem. Due to numerous lawsuits, the official cause of damage was never released. ​The bridge reduces the overall performance of the assembly, meaning more heat will flow across that layer. This reduces the amount of resistivity to the temperature differential between inside and out, creating potentially higher heating and cooling demands to maintain the design conditions within the building (as well as noncompliance with energy codes). ​The psychrometric chart is a useful tool to demonstrate the relationship between heat and moisture, providing key benchmarks for successful thermal and hygrothermal management. When designing wall assemblies, the chart is particularly useful in determining the dew point of specific conditions - a useful metric to evaluate and manage moisture - the temperature at which air becomes fully saturated and liquid water forms (condensation). The following instructions demonstrate how to calculate the dew point using the psychrometric chart. Next we will find the location of the dew point for 75F, 50% RH air. The horizontal-axis shows dry bulb temperature (the temperature of air measured by a thermometer that is freely exposed to the air, but shielded from radiation and moisture). The vertical-axis shows the humidity ratio or moisture content (typically in g(water) / kg(dry air). The curved lines through the chart represent the relative humidity (%). Using only temperature and RH, you can then locate the point. 50% RH is shown here. Move leftward in a straight line from any coordinate (combination of temperature and relative humidity) to reach the saturation curve. Without changing the amount of moisture in the air, you're determining the temperature at which the air becomes completely saturated (the dew point). By moving along the horizontal axis, the mass of water vapor is held constant, but you move towards the 100% RH line. If you move across the horizontal to the right side of the graph, you'll reach the humidity ratio, or the mass of water in air in g(water)/kg(air). This is the absolute amount of water in the air, regardless of temperature. Once you reach the point of saturation (at 100% RH), draw a line straight down back to the temperature axis to find the dew point. Here we see that the dew point for 75°F, 50% RH air is approximately 55°F. Craig, Salmaan. 2017. “Some Things You Should Know about Heat.” Thermal Tectonics for the Next Billion People, February. https://www.pubpub.org/pub/5882929e97391e003a7fd0e2.

Middle weight 8 oz pants with gusseted crotch for wide stances. Our entry level line of pants are in the middle ground between student uniforms and heavy weight instructor uniforms. As a result, they provide a more thicker feel and quality than student uniforms but at reasonable prices.

Balancing wheels of the vehicle is a matter in modern motorization quite simple, but touching each driver and each vehicle. Even the new car and its shiny new wheels need extra weights that balancing kit. Why is that and what it means for the driver and his vehicle? Inbalance new tires and wheels is caused usually by inhomogeneity of the material from which they are made. Even the best tyre products and expensive, expensive wheels mounted must be balanced. With a weight wheels constituting a dozen, and sometimes more kilograms imperfections with a mass of a few grams seem negligible. The problem is that the wheel of a car rotates very quickly. If we assume that its diameter is 40 centimeters, then at a speed of ~ 100 km / h wheel rotates up to ~ 22 times per second. Then it soon becomes clear that even the smallest imbalance is a serious problem. What are the types of wheel imbalance and how they affect the operation of the car? The first type is static unbalance. It consists in that the axis of rotation of the wheel does not cover with the axis of inertia. This results in periodically variable centrifugal force, which amplitude is dependent on the size of the wheel unbalance. This force acts in the direction perpendicular to the axis of rotation. Even when it is low and the driver is unable to see her, this causes cyclic loading small forces element of suspension and bearings, causing premature wear. The second kind of inbalance is a dynamic inbalance, which has resulted in the creation of moments of centrifugal forces, that is the forces acting on a specific arm. Dynamic inbalance is caused when the axis of rotation of the wheel cuts the main axis of inertia out of the center of mass. Then become the vibration parallel, and a wheel popularly call a wheel centered. Such loads also affect the additional wear. But the everyday use of the vehicle is not the world only in black and white, because wheel inbalance is usually a combination of static unbalance, which may be, for example microdamages of tires and the dynamic in the form of soiling the outer part of the rim or her concavity. What are the most common causes of such imperfections of the wheel – tire system? Besides these heterogeneity we meet primarily exploitationed causes. Vehicle wheels encounter daily and surface defects and omnipresent and from year to year higher curbs. Only outwardly this exploitation no trace on them, because microcracks tires leave their mark on it. The same is true with invisible at first glance damaged rims. But modern cars are getting bigger wheels and more and more low-profile tires. It is more and more difficult to travel all tiring season without a single knocing down wheels on the hole, or scratch the surface of the curb. Well, that although one reason for the formation of the tire unbalance is becoming more and more rare. In times of popularization of ABS-u more and more rarely to flatten tires as a result of rapid braking with locked wheels. Yes, daily driving is not Formula 1, but once it was frequent and what older drivers remember after such an emergency maneuver, often appear vibrations on the steering wheel. The easiest way to get to know the unbalance of the front wheels is vibration on the steering. Typically, they appear in a range of speeds, dependent on the inbalance and the frequency of free vibrations of wheel-tire system. When unbalance will cause vibrations at a frequency close to the frequency free vibrations resonance phenomenon arises - further strengthen and their propagation. Inbalance rear wheels usually more difficult to observe, because then the vibration enters all the car and the average driver could hardly finds the cause. The drivers most often prepared often walk into a trap - those who hide in their homes a second set of tires setted on the rims and often they change themselves. Nothing wrong with that, but the old mantra says that the wheels must balance every 10 000 km - many usually do not want to just go to the vulcanizer. The latter also throw in thier two cents' worth and see a strange look when someone wants to simply balance the wheel.

Cash that is in between two entities. A transfer has been initiated, but not completed leaving the cash in transit. One of the parties involved may take out a cash in transit policy, which insures that they will receive their money should something occur.

Real Lawn Fertilizer is going to be available for all of your goals involving Lawn Fertilizer in Caneyville, KY. You expect the most sophisticated technology in the field, and our crew of highly trained professionals will offer that. We make certain that you receive the very best solutions, the right price tag, and the best materials. Call us by dialing 888-310-6631 and we'll be glad to explore your alternatives, answer your questions, and set up a consultation to begin arranging your job. At Real Lawn Fertilizer, we realize that you will need to stay in budget and spend less wherever you can. You still need to get excellent quality services with Lawn Fertilizer in Caneyville, KY, and you can have confidence in our staff to help you save money while still supplying the best quality services. Our company offers the very best quality while still saving you money. When you deal with our company, you will get the advantages of our practical experience and excellent quality materials to ensure your project lasts even while saving time and money. This is achievable since we know how to save you time and funds on products and labor. Consider Real Lawn Fertilizer if you want the best quality products and services at a minimal price. We'll be waiting to take your phone call at 888-310-6631. Lawn Fertilizer are available in Caneyville, KY. It is important to be kept informed with regards to Lawn Fertilizer in Caneyville, KY. You should not go into it without consideration, and you need to know what you should expect. We take the unexpected situations out from the equation by offering reliable and complete info. Begin by talking over the project with our customer support reps when you dial 888-310-6631. During this call, you will get your concerns resolved, and we'll schedule a time to get started with the work. Our crew can arrive at the arranged time with all the appropriate materials, and will work closely with you during the entire undertaking. There's a lot of good reasons to pick Real Lawn Fertilizer for Lawn Fertilizer in Caneyville, KY. We'll be the most suitable choice when you want the most efficient cash saving options, the best quality materials, and the best rank of customer satisfaction. We've got the skills you will want to satisfy all your ambitions. Dial 888-310-6631 to communicate with Real Lawn Fertilizer and explore all your needs concerning Lawn Fertilizer in Caneyville.

The earliest “schools” during the North Dakota homesteading era were actually lessons taught in homes by the parents. As more homesteaders moved into an area, a group of neighbors would set up a school in one of their homes. In 1883, the Dakota territorial legislature passed a law creating public schools. As towns were established, schoolhouses were among the first buildings to be constructed. In outlying areas where families had settled, one-room country schools began dotting the prairie. Most of the schoolhouses were frame structures painted white. These buildings were situated on land in areas where the most families lived. If the population shifted—for example, if a large family moved in or moved away—the schoolhouse could be moved a mile or two to a more central location. When North Dakota became a state in 1889, it had about 1,400 schools. Of these schools, most were ungraded, which means that students were not placed in grades. Instead, each student worked at his or her own level. Many children did not attend school regularly because of work at home. When they returned after being absent for a time, they continued their studies where they had left off. A 16-year-old might be reading out of the same book as a 9-year-old. In the early pioneer days, the majority of the country schools were ungraded. Many of the early schools did not have blackboards, dictionaries, or libraries. Several of the earliest schools did not even have an outhouse. Most school terms ran between four months and six months. Some of the terms were split. For example, half of the term might be in the late fall after harvest had been completed and the other half in the early spring before planting began. In a split term, no classes were held during the cold winter months. During the early years of statehood, about half of the teachers did not have any teacher training and did not have teaching certificates. Sometimes, teenagers who taught school were not any older than some of their students. Later on, teaching certificates were required. In order to obtain a teaching certificate, the individual had to be at least 18 years of age and pass a “teacher examination.” This two-day written exam, taken in the county superintendent’s office, tested the person’s knowledge on more than a dozen different subjects. In 1906, there were 7,191 candidates who took the North Dakota teachers’ exam. Of these candidates, 3,725 passed and 3,466 failed. Those who failed the test were not given a teaching certificate, but they could retake the exam the next time it was offered. The language of the “old country” was spoken in the homes of most of the immigrant children; therefore, many students attending pioneer schools learned English for the first time when they started school. Sometimes the teacher would have older students translate the first reading book word for word, and have the beginners repeat the English words over and over. Adult immigrants sometimes also came to school in order to learn to speak and read English. Teaching was not the only job of teachers in one-room country schools. When the weather was cold, it was the teacher’s responsibility to have the schoolhouse warm when students arrived in the morning. This required the teacher to go to the school early in the morning and build a fire in the school’s stove. The teacher also did the janitorial work such as dusting, sweeping and scrubbing the floor, washing the blackboards, and keeping the outhouse clean. Pioneer teachers were required to follow certain rules and could be fired if they broke the rules. Examples included conducting themselves in a proper manner, going to bed early, no smoking or drinking alcohol, and no dancing. Married women were not allowed to teach. If a woman teacher became engaged or got married, she had to quit teaching. If teachers did not live close to the schoolhouse, they “boarded” with families of the students. This means the teacher lived with a family and ate meals with them. Sometimes one family would board the teacher for the full term, but more often the teacher would take turns boarding with different families. Various means of transportation were used by country schoolteachers to get to their schools, travel to town, or make other trips. Walking or riding horseback was common, but many teachers rode bicycles, which was faster than walking and cheaper than keeping a horse. Many teachers rode long distances by bicycle. For example, one teacher rode 75 miles to the county seat to take her state teachers’ exam and then rode the 75 miles home again on her bicycle. By 1910, North Dakota had more than 8,000 schools. Some of these were town schools consisting of two or more rooms. This meant that well over 8,000 individuals were employed in the field of teaching. Most of the teachers were women. Some of them stayed in the teaching profession for many years, but others quit teaching to get married and raise their own families. Teachers were often paid less than $40 for the school term. Children attending school in town usually got a better education than those attending country schools. The town teachers generally had more college training, and many towns had high schools. Town students usually did not have to miss school to work at home, and the school term continued through the winter. A major highlight of the school year was the school Christmas program. The whole community would look forward to this affair in which students put on plays, recited poetry and other pieces, and sang Christmas songs. At the end of the program, “Santa Claus” would appear to distribute apples or candy to the students and audience members. This event either marked the beginning of Christmas vacation or the end of the first part of a split term. Other events were held that involved community members also. In the spring, the end of the school term was celebrated by a picnic attended by the entire community.

FLAGSTAFF, Ariz., Jan. 21, 2019, For Immediate Release — The Flagstaff Ranger District and Mogollon Rim Ranger District of the Coconino National Forest have been closing a number of forest roads for the safety of visitors and to protect forest roads during the winter season. Each year the Forest implements seasonal road closures in order to protect the roads from damage and to keep people from getting stuck or stranded in the middle of the forest during snow storms. Seasonal road closures on each district occur at different times each year and are dependent upon incoming weather and conditions of the roads. Drivers are reminded to avoid driving on open roads that appear to be saturated in order to prevent road damage, soil erosion and getting stuck. As well, be aware that even though a forest road might start on an open road in the desert, if it begins to climb in elevation the driver could encounter deep snow, four-wheel driving conditions and closed gates in other districts or neighboring national forests. Some of the roads that people experience this drastic change in the winter months include roads such as Schnebly Hill Road, Forest Road 214, FR 618 and FR 229.

The Colour Card is a solid background the same size as the camera. The Colour Card lets you fill the scene's background with a solid colour when there is no background image. If no background or colour card is added to the scene, the resulting export will appear with a black background. By default, the Colour Card has a Z ordering value of 12 Backward. This puts the Colour card behind all elements that have a value lower than 12 Backward. Most of the time, the Colour card will appear automatically behind all the scenes elements as they are all set to 0 Backward, unless you have changed the Z ordering of the scene components. If so, the Colour Card will be in front of the elements that are pushed back to more than 12 fields backward. The value used to determine composition order when the Z value of two elements is the same. Offset Z The front-back position of the Colour Card layer in 3D space. This value can be verified in the Top view. The colour and transparency of the Colour Card. You can also attach these parameters to function columns to change their values over time. Click the colour swatch to open the Colour Picker window and select a colour.

When we think of pollution, we often think of it as a visible problem. The term usually conjures up images of rubbish dumps and oil slicks. Most forms of pollution are invisible to the human eye and come in a variety of different forms. This week, we thought we’d look at the seven major forms of pollution and their effect on the environment. This type of pollution refers to the contamination of bodies of water including groundwater. As all living organisms depend on water to live, the pollution of a body of water tends to affect every level of the ecosystem, including human health. Common causes of water pollution include industrial waste, insecticides, pesticides, and fertilisers, detergents and oil spills. These pollutants either work by killing off organisms through their toxicity (industrial waste, insecticides), or reducing oxygen values in the water (known as Eutrophication) by blocking out sunlight (detergents, oil). Air is usually comprised of 78% nitrogen, 21% oxygen, 0.9% oxide gases and 0.1% inert gases. When the air becomes contaminated with other elements such as poisonous gases or particles, it can cause serious problems to human health. The most common causes of air pollution include partially combusted exhaust gases, poisonous gases which are a by-product of industry including sulphur dioxide and carbon monoxide, and carcinogenic gases released through the burning of plastic, rubber and wood. Particle contamination can also occur when a substance such as friable asbestos fibres are disturbed and released into the air. Air pollution works either by poisoning living organisms which breathe it in, or by disturbing the atmosphere and mixing with their air and clouds to cause acid rain. In the case of particle contamination, particles such as asbestos fibres become airborne and are inhaled, irritating the respiratory system and causing health conditions. Soil can be stripped of it’s nutrients (and therefore fertility) by a number of chemical agents and when this occurs, it is known as soil pollution. Common causes of soil pollution include pesticides, insecticides, agricultural chemicals, industrial waste, and radioactive waste. Plants depend on the nutrients in the soil in order to grow, but many of these chemical compounds absorb the nitrogenous compounds present in the soil which the plants depend on. Aside from making an area barren, soil pollution is a common cause of erosion, as plants and other living organisms play an important role in keeping the soil held together. When they die off, the soil splits and begins to erode. The heavy metals which get into the soil via chemical pollution also have a devastating effect on the ecosystem as they alter the metabolism of microorganisms and arthropods living in the soil. These heavy metals become more concentrated as they move up the food chain, often wiping out predator or consumer species at the apex. Many industries release heat energy as a by-product and once released into the environment, this thermal energy is partially responsible for global warming. Manufacturing industries release thermal energy into the air as well as into bodies of water. This in itself is not necessarily a bad thing although it can dramatically alter local ecosystems. The problem arises from the excess of carbon dioxide in our atmosphere. Carbon dioxide prevents heat from exiting the atmosphere, so the heat from the sun, combined with the excess thermal energy which is a by-product of many industries as well as vehicles cannot escape and raises the temperature of the atmosphere. Global warming is responsible for the melting of the polar ice caps which in turn have led to a rise in sea levels. When radioactive metals disintegrate, they release beta rays which can cause a whole host of mutative diseases in living organisms, this is known as radioactive pollution. As the name suggests, radioactive pollution mostly comes from the nuclear power industry, either in the form of radioactive waste being dumped or improperly disposed of and then making its way into bodies of water, or from the accidental release of radioactive substances when a nuclear reactor is damaged. Once radioactive pollution is present in the environment, it can linger for decades, making enormous areas of land unfit for human occupation of any sort. The excessive, obtrusive, and misdirected use of light in areas of human habitation as well as in industry cause light pollution. Light pollution is defined as the alteration of natural light levels in both indoor and outdoor environments through human interference. Light pollution causes headaches, fatigue, stress and anxiety. Light pollution disrupts eco systems by confusing animal navigation, altering predator-prey relations, disrupting plant growth and pollination, and change competitor interactions.

Italian kitchens can be other types of kitchen that you can apply for your own kitchen. As its name, this type of kitchen will bring the feel of Italia, when you step your feet on it. You will feel joy as you feel that you cook in the Italian surrounding. Try it! If you want to make this type of kitchen for your own kitchen, then there are so many things to prepare. You know, all of the things must be prepared well, so your kitchen with Italian theme will be exactly the same as the one that has been placed in Italia. For example, you have to prepare the floor, the wall, and the ceiling that will match with the theme. All of them can’t crash with each other. Other than that, the furniture and materials in the kitchen must be thought well, too. The one that can bring the Italian feeling will suit it the most. Above all of them, if you want to apply this type of kitchen, there is one important thing that you must do. Think and arrange your budget well, as this type of kitchen will cost more than the usual kitchen.

Uda's nature, loved by its predecessors, will shine even more in spring. The cherry blossoms of Uda bloom at the same time in early April and you can enjoy the beautiful cherry blossoms competition. There is a story for each cherry blossom in Uda, and it makes for more interesting cherry blossom trips by reflecting on the background related to history and people. If you walk from the parking lot, you will be able to see “Kitamuki Jizo Sakura” first. Because “Kitamuki Jizo Sakura” is enshrined at the base of the cherry blossom tree, it is called “Kitamuki Jizo Sakura” . There is a taste of old wood, and a figure that stands close to Jizo's spear makes you feel like a good Japanese-style landscape. It is an old tree of unknown age that gives the atmosphere of a movie set. This nostalgic scenery reminds the nostalgic mind of the viewer. The ancient Samurai's style, Matabei Sakura, is a beautiful cherry tree with a branch around 3 m around the trunk and 13 m in height. It is said that he had a nickname of "Juno Matabei" and was killed in Osaka summer squad. On the other hand, I have many anecdotes such as having lived as a monk in this place. It is said to be a place where people have spilled out of the great swells of history and have lived dreaming of resurgence. It's also a powerful cherry blossom like the spirit of the soldier is riding. This legend of old wood captures the hearts of visitors. Only one cherry blossom has become famous for being used at the opening of the TV drama, and it is said that it has attracted approximately 60,000 people from all over the country. The branches that fall like jumping out of a stone wall are so powerful that they don't seem to be 300 years old. Paths are maintained around you, and you can look around the thick trunk. And the other highlight is "Wind branches in the wind"! It looks like the branches fluttering like that, as if they were talking about something with the wind. There is a walkway on the other side of the river, and the "Matabei Sakura" seen from here has a magnificent appearance on the green mountain. In addition, the dream of the soldier was scattered in the summer, but the people reflect a soldier, “Matabei” in the powerful cherry blossom which is likely to move now. In addition, about 100 cherry trees are planted over 500 m along the Houno River, which is a 10-minute drive from “Matabei Sakura”. How about going off to see the cherry blossom tunnel? I am fascinated by the world of Uda's cherry blossoms.

Vegetarianism has evolved as a topic of consideration among society. It is believed that a vegetarian diet if better for human body. While I accept that plant-based diet is beneficial for those who pursue a healthy lifestyle, I do not agree this tendency would be suitable for everyone. There are a variety of reasons why it is highly beneficial to become a vegetarian. First and foremost, there are many kinds of vegetables providing us with enough energy to work all day long. In other words, it is less necessary to eat meat to have a healthy diet. Take potato as an example, is is of indispensable ingredient for a properly balanced vegetarian diet since it provides us with a large amount of nutrients. Second, it is proven that vegetarians have lower risks of developing many chronic diseases such as cardiovascular disease, obesity and diabetes. This is due to the fact that a plant-based diet contains low in saturated fat and high in fiber, vitamins and minerals. However, I strongly believe that this tendency is not an optimal option for everyone to take. A significant reason supporting my opinion is that the decision to become a vegetarian should be made by individuals regards to their food preferences, not a general suggestion. For instance, a person who have predilection for animal-origin products would feel unsatisfied and frustrated if he or she is force to consume only fruits and vegetables. Moreover, the demand for nutrients should be taken into consideration when each individual plans his or her diet. A salient example of this is children, who are in the process of growing up, as a result they need to consume a wide range of food, including meat which contains essential nutrients, to improve their physical health. In conclusion, although I agree that pursuing a plant-based diet is highly beneficial for health, I do not believe that it is the optimal option that everyone should take. Vegetarianism has become evolved as a topic of consideration among members of society. It is believed that a vegetarian diet if better for human body. While I accept that a plant-based diet is beneficial for those who pursue a healthy lifestyle, I do not agree this tendency would be suitable for everyone. There are a variety of reasons why it is highly beneficial to become a vegetarian. First and foremost, there are many kinds of vegetables which will provide us with enough energy to work all day long. In other words, it is not less necessary to eat meat to have a healthy diet. Take the potato as an example, is is of indispensable ingredient for a properly balanced vegetarian diet since it provides us with a large amount of nutrients. Second, it is proven that vegetarians have a lower risk of developing many chronic diseases such as cardiovascular disease, obesity and diabetes. This is due to the fact that a plant-based diet contains (wrong word) low in saturated fat and high in fiber, vitamins and minerals. However, I strongly believe that this tendency is not an optimal option for everyone to take. A significant reason supporting my opinion is that the decision to become a vegetarian should be made by individuals in regards to their food preferences, not as a general rule / prescription suggestion. For instance, a person who have a predilection for animal-origin meat products would feel unsatisfied and frustrated if he or she is force to consume only fruits and vegetables. Moreover, the demand for nutrients should be taken into consideration when each individual plans his or her diet. An salient example of this is children, who are in the process of growing up, (comma splice error) as a result they need to consume a wide range of food, including meat which contains essential nutrients, to improve their physical health. This is possible but wordy. People generally talk of animal products. This is possible but wordy. Using the word they would be enough. pham thi quynh nhu consume only fruits and vegetables. That is not the case with vegetarianism.

It’s busy on the Stiperstones this afternoon – lots of black sheep, at least two red kites, a grouse, a good number of alpacas and several llamas. There were quite a few people too, in the more popular parts – something to do with it being half-term, and the weather fine, clear and sunny? Young parents and children, a largish party armed with pointy sticks and a large group of – were they schoolteachers? Our greatest fear was that they might arrive at the Bog before we did, and that it might be packed anyway. Our fears were unfounded – just a medium-sized group around one of the tables, and it seems one of us knew them all anyway, so that was OK. The tea and cakes were, as ever, excellent (and well-earned, of course).

CHEYENNE, Wyo. - An accident on I-25 northbound blocked the left lane Saturday afternoon. The accident happened near Cheyenne at mile marker 12 around 2 p.m. Saturday. It was cleared at 2:45 p.m. and delays are easing. Exercise caution when driving in inclement weather. Be sure to give the cars around you plenty of room, use slower speeds and drive with your lights on.

The Pechora river in the Republic of Komi and the Nenets Autonomous district of the Russian Federations river is 1809 km. Freezes in late October, the showdown takes place with the support of formations of ice jams. The source of the river Pechora is located in the Pechora-Ilych reserve, close to one of the wonders of the Russia - plateau Manpupuner. Flows Pechora in the Pechora Bay of the so-called Pechora sea. Length - 1809 km, basin area - 322 thousand km2. Takes river beginning in the Northern Urals, in the South-Eastern part of the Republic of Komi, and flows at first mainly South-West. From the source to the mouth of the river Ugni Pechora has a mountainous character. At settlement Yakshi (after the confluence of Volostnych) turns North and flows along the Pechora lowland to Ust-Moustache. After the mouth of the river Mustache turns West, forming a wide knee with two large bends. Channel width up to 2 km in the valley appear vast floodplain meadows. In Ust-Tsilma (after the confluence of the rivers Tansy and Tsilma) Pechora turns North again, on this part of its broad floodplain cut through by numerous canals («balls») and old women. About 130 km from the mouth of Pechora into two branches - Eastern (Large Pechora and Western (Small-Pechora). Below, in the district Naryan-Mar, the river forms a Delta width of about 45 km and flows in Pechorskaya Guba, Pechora sea. Tide currents spread to the South to the village of Oksino. The food is mixed, with more snow. Flood begins in late April - early may, the maximum - in the middle of may in the middle stream and downstream until the beginning of June. In summer and winter low-water period. Summer low-water period is from mid July to August, is often interrupted by rain floods. The average discharge at the mouth 4100 m3/sec. Freezes in late October, the showdown takes place in the upper reaches, and is accompanied by ice jams. Regular navigation is possible to Troitsk-Pechora, in spring and autumn - to Ust-Ugni. The vessels going up the river to Naryan-Mar (110 km from the mouth). Fishing (salmon, whitefish, vendace). In the Pechora pool there are deposits of coal, oil and gas.

The first category of Joseph Campbell’s Monomyth is the departure category in which has five stages under it. In the movie, The Matrix, the Departure category begins with the Call to Adventure when we see Neo sitting at his computer trying to figure out what is wrong with the world. During this scene we see Neo go to a nightclub where he meets Trinity. In this scene he follows a white bunny that leads him to the nightclub. This is an example of the call to adventure in Campbell’s terms because Neo, the hero is in a state of “neurotic anguish.” Neo is also led into this quest by Trinity who acts as the “herald” in Campbell’s terms. The third stage of Campbell’s departure category is that of Supernatural Aid. Campbell describes this stage as when “the hero encounters helpers along the way and may receive items and information necessary to the completing the adventure successfully.” We see an example of this stage in The Matrix when aid is given to Neo by the Oracle. During one scene, the Oracle tells Neo that he has to make a decision. He must either choose his life or choose the life of Morpheous.

The camp site in the town Siglufjörður is well located in the center of the town. The camp site in Siglufjörður is located in the center of the town, next to the pier and the square. All services, museum and activities are only about 5-10 minutes away. South of the avalanche protection guard is another area for those who want a little more peace and quiet. From that camp site there is a short distance to the golf course and for bird watching. There is about 1o minutes walk downtown from the latter camp site. Washing macine: 900 kr pr wash.

Our method is based on a simple and intuitive concept with just one aim: make every kind of clothing. All bases are made freehand without the use of pre­built templates or graduated squares. At the end of the course, after having made many patterns, the student will be able to produce any outfit from a simple shirt to an elegant suit, from a skirt to a coat, from underwear to wedding gowns. The Burgo method is both traditional and new at the same time; the flavour of the ancient tailoring tradition is combined with modern creativity, always evolving with time. That's why the practice and the search regarding the materials are fundamental and instrumental to the academic and professional preparation. It's very important, step by step, to have constant contact with the teacher. Each student is followed and advised, always with respect for his own individuality. For this reason there cannot be more than 8 students per teacher.

Abstract: The status of the global fits of nuclear parton distributions (nPDFs) is reviewed. In addition to comparing the contemporary analyses of nPDFs, difficulties and controversies posed by the neutrino-nucleus deeply inelastic scattering data is overviewed. At the end, the first dijet data from the LHC proton+lead collisions is briefly discussed.

It's safe to say that Assassin's Creed Origins is really good, and it's been getting good reviews pretty much across the board. It's the first time since 2009 that the series hasn't pumped out a new installment every year, and the time off shows. The game has taken a decidedly new direction for the series, and has changed in many ways for the better. Luckily, this willingness on the developers part to take their time to make a game great has paid off financially, as well as critically. Origins sold double the numbers that previous entry, Assassin's Creed Syndicate (which was honestly quite good). Interestingly, it sold about the same amount of physical copies as its predecessor, and the main difference is in the number of digital purchases; 35% of sales were digital. Surely, someone somewhere is furiously analyzing the market to find ways to capitalize on this, and we can only hope their discoveries will be good for the consumer.

Diabetes, describes a group of metabolic diseases in which the person has high blood glucose (blood sugar), either because insulin production is inadequate, or because the body's cells do not respond properly to insulin, or both. Type 2 diabetes is a condition in which cells cannot use blood sugar (glucose) efficiently for energy. This happens when the cells become insensitive to insulin and the blood sugar gradually gets too high.

Definition: The progression of the mammillary axonal complex over time, from its formation to the mature structure. The mammillary axonal complex is formed by the axons from the lateral, medial mammillary and the dorsal premammillary nuclei which share a branching pattern. Every neuron gives off one axonal stem that bifurcates into 2 branches. One of the branches is directed dorsally to the thalamus and another caudally to the midbrain.

Wall-mounted adjustable shelving that's versatile enough for home or commercial use, including storage and displays in retail stores, grocery stores, offices and more. The 80/180 Series regular-duty standards and brackets feature a single slot design with 1" vertical slot adjustability. Available in a variety of finishes and sizes. BHMA Grade 2 compliant.

We are happy to announce the formation of a new Moorestown FIRST LEGO League team. The team will begin meeting in March/April to teach the team members how to work with the LEGO MindStorms Robotics kits. The team will continue to meet throughout the Spring and Summer in preparation for the 2012 Challenge. Once released, the team will work on a research project and an autonomous robot to compete in November/December.

This photo shows Verizon workers on strike in Hadley, Massachusetts, near Amherst, on April 14. One of the people in the photo is Jack Stankowski. He lives in Deerfield, Massachusetts, near Greenfield. He has worked at Verizon for 19 years. In winter, he often has to work on top of telephone poles. "I'm here for the working class," Stankowski told the Valley Post. "Corporations just want to take, take, take." At UMass Amherst, police arrested 34 people for non-violent civil disobedience on April 12 and April 13. The protesters were calling on the university to divest from fossil fuels. More information is at their web page: www.facebook.com/divestUmass.

Canceled -- we will reschedule these cool events! The hot chocolate bar that was postponed from December is back on! In addition, we will be doing a Breakout EDU box puzzle. There's snow in the forecast, so please check your email after 5 p.m. or call Tricia before 5:30 p.m. to make sure we are meeting.

By Elements Ballet Dancer Megan Walsh. Photos by Topher Alexander. The Element of Earth is found in our physicality. In Nature, Earth is the container and the holder, for which all the other elements can reside and operate within. It is the ground foundation, the basic structure and framework for all of creation. The physical body, being the basic instrument of operation, is very much a part of the Earth Element. Especially as a dancer, the body is a fundamental aspect in the creation of their art. Therefore, the act of building, maintaining, and nurturing the body is essential. A strong, solid base is needed to grow, develop technique, and expand as dancers and artists. Quite literally, the body is a dancer’s tool for expression. In dance, Earth is all about sweating, warming up the body, and building muscles. This is an essential step in a dancer’s training, which allows them to stay healthy, avoid injury, and make it through the long rehearsal process. Dancing requires a lot of the body, and for a dancer to be able to rely on it, it needs to be taken care of properly. The Element of Earth can be seen in everything we do on stage. We train and work our bodies hard in each rehearsal, so we have the strength and stamina to push through all the physically demanding choreography. It is the athleticism that can be seen throughout an entire show. The Element of Air is the mental facility. After a strong body is built by the Earth Element, the mind and intelligent nature step in and are able to shape it. Using the quality of air allows the body to work beyond what it has been given and push past physical limitations. It’s about moving forward in the development of the human body, and breaking boundaries. This is what Air in dance is all about; it shapes the body, working and molding it towards a state of perfection. It’s a superhuman quality. Dancers need to look like they are floating on air, making everything look effortless. In order to get to that place physically, it requires focus, discipline, and concentration. It is an extreme mental workout, but one that needs to occur to move the body forward, to achieve grace, elegance, and beauty in all of the lines. Air also concerns transitions and the quality of movement in between the steps. It teaches the dancer to not only create beautiful shapes, but how to move smoothly and seamlessly from one to the next. The Element of Air can be seen by our strong technique in all the choreography we perform. By having a strong Air quality, we can almost take our technique for granted on stage, which lets us be more in the moment and perform to our fullest. Air is the overall quality of grace and ease that we as dancers try to convey through our movement. It is also the element that we can call upon the middle of a piece, if something is going wrong, and we need that technical aspect to help get us back into proper placement. The Element of Water is the emotional body and feeling nature. Through the Earth and Air Elements, the physical body has been built and then perfected by the sharpness of the mind. Adding the quality of Water, the body is given more fluidity and range of motion. Water is very grounding and allows access to deep emotions and feelings, which are the seat of creativity. In dance it is an element of improvisation, exploration, and experimentation, allowing the dancer to go to that place of open vulnerability within themselves and discover a new way of moving. It’s about going beyond the perfect lines developed with the Air Element. It allows a space to flirt with the awkward, the strange and even the ugly, to create more interesting and dynamic shapes. Water in dance works to give the dancer a broader range of movement vocabulary, so they have more to call upon during the creation of their art. Collaborating as a company in this element opens up the floor for a more emotional and unspoken bond between dancers. It is a way for the company to mold together on an energetic level. The Element of Water can be seen clearly in our repertory piece Pathos, by Mike Gosney. Already a dark, emotional ballet, the choreography calls for us to connect to our internal, watery realm. By accessing this place of vulnerability within ourselves during the piece, we hope to portray in Pathos an honest story of death and loss, and to invoke these deep feelings within the audience when we perform. The Element of Fire is passion. It is the inner flame that is the source of everything and fuels all of life. Fire is the heart. It’s that special je ne sais quoi that someone has when they light up a room and grab everyone’s attention. Fire is dynamic, strong, and very powerful. When operating through this element in dance, the dancer is finding their inner drive to show off and get noticed. It’s about gaining recognition and attention, proving to the world that a place in the spotlight is more than well deserved. Sometimes, Fire needs to find that anger and competitive nature in to fight for a place at the top and to show why a dancer’s uniqueness is special and needs to shine. At the root of it all, though, Fire operates from a place of love. It’s finding the meaning that each individual has for dancing in the first place. Even though a life in dance is physically, mentally, and emotionally strenuous, it is ultimately a love for the art and the craft that inspires dancers to continue to work hard each day. In the Elements Ballet repertory, The Element of Fire is inherent in every piece, but can be seen very clearly in the choreography of Joseph Caruana’s The Sun King. A story about passion, glory, and recognition, we are each of us in the work dancing in a dynamic way to catch audience’s attention and get in their face. The Sun King calls for us to tap into our inner fire and show off who we are as individual dancers, to gain our opportunity to be in the spotlight.

Sat. Mar. 7th, 2015 - 1:00 p.m. – 4:00 p.m. This entry was posted on Wednesday, September 3rd, 2014 at 12:25 pm and is filed under Admin - Programs and Events. Both comments and pings are currently closed.

High atop the Mesa sits this charming 3bed/2bath California Cottage with about 1300 sq. ft. of living space. The sale is an "AS IS sale by a Trust to the full extent allowed by law" and that "Buyer is strongly encouraged to conduct their own inspections to evaluate the condition of the Property". The best feature of this property is the flat 9583 sq. ft. lot. Located just a few short minutes to the Mesa Shopping Center, Downtown Santa Barbara, Hendry's Beach, Shoreline Park, and much more!

Fortune 100 Corporation, McLean, VA – The space utilization analysis conducted here addresses the four buildings located on the campus in McLean, VA. The analysis targets elements that impact the physical work environment, staff performance and satisfaction, workplace efficiencies, and overall corporate culture. A holistic approach is needed if changes are to happen so the workplace can reflect current work trends and requirements. It is important to recognize that business is conducted differently today as compared to over twenty years ago, when the campus buildings were designed and built. The analysis was based on site observations that took place over a period of four months and brief staff interviews related to current space use, work methodology and use of technology. Deciding what creates the most value for the organization is the first step to develop workplace strategies that will effectively increase worker productivity.

New and unused camera bag by Aputure. Originally meant for COB120d lights but can be used as a standard camera bag. The sides are strengthened with plastic inserts. High quality materials. Note: the A7SII in one of the pictures is for reference only.

Johnstown does have a small airport that flies exclusively to and from Washington, D.C. The closest major airport is Pittsburgh (about 2 hours), but there are several additional small airports in the region that are about an hour away, including Latrobe and Altoona. Amtrak offers service to Johnstown. The railway station is downtown and less than a block from festival grounds, and within walking distance of the two downtown hotels (the Holiday Inn Downtown and EconoLodge).

Arachnoiditis is a pathological condition characterized by inflammation of the arachnoid which is a part of the spine. The arachnoid is the middle portion of the three membranes that surround the brain and the nerves of the spinal cord and protects them from any damage. Arachnoiditis can result from a surgery done to the spine, an injury or trauma to the spinal cord, or due to irritation from any medications like steroids injected directly into the spine. As a result of this inflammation, there is significant damage done to the spinal nerves causing them to cluster together. Arachnoiditis can also affect the smooth flow of the CSF. The damage to the spinal nerves as a result of Arachnoiditis results in the symptoms classic for Arachnoiditis to include pain, numbness, tingling, and ambulation difficulties. There is one question that comes to mind of patients with Arachnoiditis and that question is whether Arachnoiditis can cause headaches. This article throws light on this question as to whether Arachnoiditis can cause headaches. Headache is one of the most common symptoms of Arachnoiditis. Studies have suggested individuals with Arachnoiditis tend to complain more of headaches that any other symptoms. This can be caused due to a variety of reasons including muscle tension as a result of Arachnoiditis. The severity of the headaches is variable although in most cases patients complain of severe headaches. The primary reason for headaches is believed to be alteration of the flow of the cerebrospinal fluid as a result of the clumping of the nerves, scar tissue formation, and fibrosis due to Arachnoiditis. The clumping or clustering of the nerves occurs as a result of the damage done to the nerves due to inflammation of the arachnoids. In conclusion, while there are a host of neurological symptoms that are caused as a result of Arachnoiditis like numbness and tingling, severe pain at the affected site in the spinal cord, and problems with ambulation, and headache is one of the most common symptom. The primary reason for the development of headache is the alteration in the flow of the cerebrospinal fluid as a result of the clustering of the nerves and scar tissue formation due to inflammation of the arachnoids.

This is a great oversized lot (.31) acres in Gulf Cove in a community close to the beaches of Englewood and Boca Grande. Nice lot to build a home as new homes are being built in this area, with access to a community boat ramp. Water available, not in scrub jay zone.

Qi Lu has 40 U.S. patents to his name, and also has a PhD in computer science from Carnegie Mellon University. He previously worked at Yahoo for 10 years, and while at Microsoft was also responsible for all of the research and development teams across Office 365, SharePoint, Exchange, Yammer, Lync, Skype, Bing, Bing Apps, MSN and the Advertising platforms and business group. Will Microsoft miss Qi Lu?

Diagnostic tools must rely on robust high-breakdown methodologies to avoid distortion in the presence of contamination by outliers. However, a disadvantage of having a single, even if robust, summary of the data is that important choices concerning parameters of the robust method, such as breakdown point, have to be made prior to the analysis. The effect of such choices may be difficult to evaluate. We argue that an effective solution is to look at several pictures, and possibly to a whole movie, of the available data. This can be achieved by monitoring, over a range of parameter values, the results computed through the robust methodology of choice. We show the information gain that monitoring provides in the study of complex data structures through the analysis of multivariate datasets using different high-breakdown techniques. Our findings support the claim that the principle of monitoring is very flexible and that it can lead to robust estimators that are as efficient as possible. We also address through simulation some of the tricky inferential issues that arise from monitoring.

Idalia Borquez began her career with a background in Sales. She received her license in 2004 and found the real estate industry to be her passion. Her driving force has been to excel in client representation. Throughout her real estate career she has taken active roles on the financial areas, has worked as a counselor for real estate government programs, represented sellers and buyers and stays up to date on different areas of the real estate industry in order to be able to provide clients with an outstanding knowledgeable service. Idalia’s motivation is people. She believes every person is amazing in many ways. When Idalia isn’t working you’ll find her at home reading, studying, learning about different cultures, doing research, and getting involved in humanitarian projects, she also enjoys outdoor activities such as hiking and mountain climbing. Idalia currently resides in Calexico and is fluent in English and Spanish.

"Follow this link to view the online version of our brochure. To download the PDF, first open the online version, then click on the "Download" icon at the bottom in the middle of the page. You can then choose whether to save individual pages or the entire PDF."

All These Photos Have One Incredible Thing In Common, Can You Guess What It Is? There’s no denying that we humans have done a lot of damage to planet earth, but we’ve also reshaped it into some amazing patterns, textures, shapes, and colors. Believe it or not, all of the photos of landscapes below are man-made.

This deckchair is a combination of a traditional deckchair but with the addition of a comfortable wooden seat and arm rests. This deckchair with arms is perfectly designed to help you get in and out of the chair as well as providing a handy place to lay a book or magazine. This range of deckchairs with arms are all made from solid hardwood and high quality cotton and are extremely easy to set up. They are the perfect deckchair for relaxing out in the summer sun on your patio or in your garden.

Airstream certified service center serving north Texas over 28 years. Pre-purchase inspections, mobile repair serivce. Over 40 years of combined experience in the automotive, RV, and truck industry. 8:00 a.m. - 6:00 p.m. Mon-Fri 9:00 a.m. - 12:00 p.m. on Sat.

Check out these 8 genius DIY mouse traps! This is a very simple DIY mouse trap that will easily catch a mouse. All you have to do is smear some peanut butter inside the glass (on the bottom) and turn it upside down so it rests on the nickel. As soon as the mouse enters and starts eating the peanut butter, the nickel will get displaced and the glass will trap the mouse. Using a shoebox will effortlessly help you catch a mouse or two. Simply take a shoebox, cut a rectangular hole on top, and glue some paper so it forms a trap door. Place some bait in the middle of the paper and put the shoebox in a nice position. The mice will climb up, realize there’s food available, and fall into the shoebox since the paper can’t hold them! Balance the empty toilet paper roll on the edge of your table. Put some bait on the far end and place a bucket under the toilet paper roll. Once the mouse tries to take the food, the balance will be disrupted and both the mouse and the roll will fall into the bucket. Make sure it’s tall enough so the mouse can’t climb out of it! Cut the top part of the bottle and turn it upside down in the bottom part of the bottle. Fasten the edges with something (preferably duct tape) and place some bait at the bottleneck (but make sure that it doesn’t fall inside instantly). Put the bottle next to a shelf and secure it at the bottom so it doesn’t tip over once the mouse falls through the bottleneck! Get a large bucket and create an entry point near the top of the bucket on the sides. It needn’t be large; just about the size of a mouse. Place a platform (which is secured to the top of the bucket) so the mouse can climb onto it. A bit of peanut butter on the other side and voila! The mouse will disrupt the platform which will make it fall to the bottom of the bucket. The process is very similar to the one above except you don’t use a platform. Using a can might seem counter-intuitive but if you do it correctly, there’s no way that the mouse will escape. The mouse will climb onto the can (in an attempt to reach peanut butter which is on the other side) and will fall into the bucket (as the can will spin). Again, very similar concept to the above two traps except you’ll be using a plate. Make sure that you place the plate on top of the bucket but off balance (basically, make one side larger than the other and keep the larger side balanced by using the bucket). The mouse will fall into the bucket once it attempts to cross the plate and get to the bait. This DIY trap is also relatively simple to make but you need to be careful. This video sums it up pretty well and it explains the logic behind it.

It is important to note that people are becoming more civilized with the continuity of modernization and improved living standards. It is important to note that this brings the need to use diverse modern equipment and house ware such as carpets. It is good to consider the reason that there is the need for a more comfortable and cozy living. A number of places use the carpets for decor. It is therefore important to maintain the carpets in clean condition. An individual does not need to work himself out on the ways of cleaning the carpet. It is important to note the reason that there are a lot of carpet cleaning companies offering cleaning services. It is important to note the points stated below as they highlight the importance of carpet cleaning companies. It is important to note that Albuquerque air duct carpet cleaning companies offer professional services. It is good to consider the professionals hired by the cleaning companies to be equipped with cleaning skills. Cleaning your own carpet may measure out to different results. It is important to note that professionals have an idea on the right cleaning agents. The professionals are in position to evaluate the methods of cleaning to achieve better results. It is important to note the reason that they have a variety to choose from. It is important to note that the professional cleaning guarantees clean and comfortable carpet. It is important to note that carpet cleaning companies have efficient cleaning machines and properties. It is important to note that most of the cleaning companies have advancement based on the technology. Hence they are in position to change the cleaning machines with time. It is good to consider that the cleaning machines may not be available at home. It is important to note that most of the machines go for high prices. It is important to note that during cleaning a number of cleaning agents are used. Remember the cleaning agents have their different use. This cleaning agents help in achieving best cleaning results. The cleaning agents might not be available at home or any sales stores. Commercial carpet cleaning Albuquerque companies offer efficient and fast services. Remember that most cleaning companies do not rely on manpower. It is important to note the reason that there are machines in place for cleaning. This assures quick cleaning services. Employing an individual to clean the carpet may take a lot of time. It is good to consider that the cleaning may not be effective because it is done without the use of machines. It is advisable to for an individual to consider dropping the carpet at the cleaning company for a fast cleaning. Some of the cleaning companies go ahead to offer delivery services after cleaning. This saves on time since you do not have to worry about picking up the carpet.

This exclusive bottle opener is an elegant turn on the Vöslauer logo. The letter V is transformed into an attractive object and a new type of bottle opener at the same time. According to the logo, the serifs of the font turn the letter into a practical tool.

You would be most welcome! At St Marks roundabout take the exit onto Wain A Long Road (signposted Laverstock). Proceed down this road (there are lots of parked cars and you may have to give way to oncoming traffic). At the bottom of the road turn right. At the mini round about turn right up the hill past Godolphin Prep. The entrance for The Godolphin School is on your left at the top of the hill. There is plenty of parking on site. Walk up Milford Street, passing under the Ring Road, and right up to the top of Milford Hill. Godolphin School is just on the other side of the mini round about. Love God, love others – 24/7. This is what we aim for. We have plenty of parking, and there is easy access to the hall we meet in. The Sunday meeting begins at 10:30 am, but we serve coffee and cookies from 10:00-10.25 am. The refreshments are on us, sit wherever you like, and make yourself at home – we do. We begin with about thirty minutes of singing where we express our love and thanks to God. Feel free to participate (the words are projected onto a screen) or simply listen. This is usually followed by a time of prayer and reflection as people to respond to God’s Presence. Then there is an opportunity for people to give as part of their worship. Baskets of sweets are passed around and everyone takes one. Those who want to give a gift put it into the baskets as they are passed round. Then the children leave for their program. The one exception to this is on the first week of each month when the kids program runs for the whole service. On these weeks they are signed in to their activities when you arrive. Once the children are all signed in, there is a talk based on the Bible. It aims to apply the Bible to everyday life in a way that is challenging and inspiring. Following the talk, there is an opportunity for people to receive prayer. If this is new to you, feel free to watch – we will try to explain what is happening as we go along. The service is over by 12:30 pm, but some people stay a while longer and chat. The children are brought back into the main hall for you to sign them out.

Hardware configuration: the computer interface card PCI ADDA convertor-12 bits, time of conversion - 0.01 ms, DMA, an universal control board and a set of sensors (for physics, chemistry and biology). The system offers the possibility of simultaneous measuring and data displaying for 8 input channels and process control via 2 analogue and 2 binary output channels. The analogue outputs channels work as programmable voltage sources (DC, AC with eight kinds of default signals, manual controlling or user defined signals). Maximum sampling frequency (100 kHz) enables studying of sounds or other high periodicity signals. The ISES system is supplied with a set of sensors - ammeter, voltmeter, thermometer, simple position sensor, capacity-meter, ohmmeter, force meter, anemometer, microphone, sonar, light gate, pH-meter, conductivity meter, heart frequency meter, current booster, repro, loudspeaker, relay, electromagnet valve for liquids and others. It is possible to study current, voltage, capacitance, resistivity, mass and force, pressure in liquids, etc. In chemistry the acidity, exothermic and endothermic reactions, titration and many other processes can be studied. Biology students can measure for example some periphery blood vessel system functions. The ISES modules are easily interchangeable, the computer, provided with the automatic calibration, automatically senses their presence and adjusted range.

There are several ways you can contact us. If you have a written query or would like to be added to our mailing list simply fill in your details on our contact form below and the information will automatically reach us. Alternatively you can call us directly or send a letter to the address at the bottom of the page.

Yakut (or Sakha) is a Turkic language spoken in East Siberia. Since it has been on the periphery of the Turkic world for a long time, it has preserved a great number of archaic language traits. On the other hand, Yakut people had very intensive contacts to Mongols and Tunguses, as a result of which their language has changed significantly over the course of time. This dichotomy of ‘archaic’ and ‘progressive’ phenomena makes Yakut a very specific case not only for turcological but general linguistic investigations. László Károly’s study presents an elaborated analysis and description of the deverbal nominal derivational suffixes in Yakut as spoken in the pre-Soviet times. Based on the analysis, various aspects of Yakut and at the same time Turkic and Mongolic word formation processes are discussed, such as historical development of the suffixes from Old Turkic up to modern Yakut, changes in the system through language contacts, similarities to and divergency from the other Turkic languages. Besides a formal description, the functional side of the analysed derivational suffixes is presented in a systematic fashion, providing a general framework for future works on comparative derivational morphology.

If we are given a single point and the slope of a straight line, we will be able to graph it. By the same token, we can determine the slope and intercepts if we are given from its graph. Find the slope, x and y intercepts of each line.

Five is the name of the commercial building constructed in 2017 by the multinational construction company Skanska in Smíchov, Prague’s business district. The complex covers an area of 14000 m2, and its interiors are intended for use as offices. Fittingly, they have a strong industrial vibe, thanks to the use of raw, rough materials and minimal furniture. Cutting-edge sustainability solutions have been used throughout in the building's design, with the result that Five has been awarded the highest level of green building certification for its energy efficiency and ecological footprint (LEED Platinum Certificate). Lighting plays an important role in maximising energy savings, and LED fixtures were chosen for the entire building. In the edifice’s spacious reception area, Rio 1 linear profiles in three different lengths – 510 mm, 1010 mm and 2010 mm – are recessed into the rough floor. The profiles, which have a colour temperature of 2800K, create a pattern of diffuse light across the floor. In the waiting area, the profiles are recessed parallel to each other, while in the area that leads to the lifts they weave perpendicularly to each other.

The final event in most cardiovascular events and strokes is the formation of a blood clot. An understanding of what causes this to occur is crucial to being able to prevent it. One of the factors that determines the behavior of particles in a fluid is called Zeta Potential, which, in simple terms, is a measure of the stability of particles in a fluid. In other words, it represents the tendency for suspended particles to precipitate (clot) or remain in suspension. The Zeta Potential is dependent on the amount of fluid, the number of particles in the fluid, and the ionic charges on the particles. One of the most effective treatments for optimizing Zeta Potential in the body is the Electrolyte IV, which uses a combination of EDTA, Vitamin C, and minerals. EDTA is a well known chelating agent that helps to remove excess debris, including plaque, bound minerals and toxic metals from the body. By also influencing the Zeta Potential in the vessels, this IV makes the blood “thinner”, thus reducing the potential for clotting. The Electrolyte IV helps to change the blood so that it has the ideal physical traits to enhance proper function and health. This approach treats the internal environment by improving pH, resistance, conduction, and other variables. These factors help determine if one is too acid or alkaline, is prone to clotting or not, and whether one is susceptible to a host of other conditions, including infections, stone production (in the kidney or gall bladder), arthritis, cancer, and many other ailments. This IV has a positive influence on our health in a wide range of areas.

It is important to know that having the best job as a disabled person it might be a difficult affair and hence it will be good to go for the disability job board due to the following reasons. You should know the main reason that will make you consider the disability job board is that you will be able to get a chance to get a good job just like the other people. The other thing that makes the disability job boards the best for the people that are disabled is that they will be able to get the right kind of the platform where they will get the advice that they need when they are job hunting. If you are a disabled person you will stand to benefit from such a board as it will act as the linkage between you and the employer and that way you will be able to have the best link that you might need when it comes to applying a job. You should know the use of the board services will be one of the best ways that you will be able to show your CV to the relevant hiring companies and therefore it will be easy for you to get the right employer basing on the fact that you will have a good platform to depend on. The other thing that makes the help of the board important is that you will be well exposed to the job market as the employers will be able to look at your resume and review it and if they are happy with it one day you will be given a job that you deserve. You should know that the board will do whatever it will have to do so as to ensure that you will get the right kind of the job that will suit your skills and experience as the board will work closely with the best employers who will in return offer some jobs when they come along. You should know that the aim of the disability job board is that it will do its best to make sure that the hustles of looking for work as a disabled person are minimized and that way you will stand a better chance to avoid such hustles and at the same time you will get the job that you want within a short time. Moreover, you will have the right channel that will be dedicated to helping the people with the same condition like the one you have and that you will have a helping which will be vital to the job hunt success.

Providence is calling a Registered Radiologic Technologist to Providence Willamette Falls Medical Center in Oregon City, Oregon. This is a part-time (32 hrs per week), benefited position. Work schedule is Friday 9:30 a.m. - 6:00 p.m. and Saturday, Sunday and Monday from 3:00 - 11:30 p.m. Perform imaging examinations according to physicians orders, utilizing a variety of sophisticated imaging equipment, taking into account individual patient's unique and/or age-related needs, including performing imaging studies with portable equipment on hospitalized patients. Utilize clinical knowledge and judgment in regard for proper positioning factors, radiation dose calibration of technique and patient treatment needed to produce optimal high quality images. Perform all examinations with minimal radiation exposure to patient and operator with ALARA awareness. Competent in using specialized imaging equipment with all patient types; inpatient, outpatient, emergency, surgical suites and perform complex fluoroscopic procedures following sterile technique protocols.

You will not easily run out of things to do in Montecito. The community in which this area is built boasts of complete facilities and amenities. This is important so that your well-being and recreation time are really taken care of. There are both individual amenities as well as social amenities that are found in this area. The houses have all the necessary equipment to make sure that your life is simple and comfortable at all the time. The social amenities are meant to help you have fun as well as unwinding up. It gets hectic going to work or school every day. Therefore, you need some time to go out play a game or just simply jog or take a swim. All these activities are meant to help you interact socially and keep you in great shape.

The best way to deal with them is prevention. This includes knowing the rules of the game, using proper equipment and playing safe. Injuries usually occur due to improper training, poor footwear/safety equipment and poor foot biomechanics and in teens during rapid growth. Acute injuries usually occur from a single blow. Overuse or chronic injuries happen over a period of time. Ex: Repetitive movement in training, running, throwing, etc. Prevention is the key to enjoy injury free sports. Remember to stretch before and after all activity and see your chiropodist to maintain healthy feet.

Smoking is a cooking process, which use the application of steam for cooking the food. The cooking is done usually by burning wood. Fish and meat are the two most common foods, which are smoked. It is also healthier as it will not use any type of oil for cooking the foods. Most of the smoker manufacturers are also introducing the electric smokers in the market. Instead of burning the woods, this unit emits smoke or steam to cook food through electric power. Most smokers have electric temperature adjustment and controls, which is vital for cooking chicken or meat to the perfection. Many smokers also have the automatic electric generators for heating the food. Some types of smokers available in the market are charcoal, electricity, gas and wood smokers. Below listed are some of the different types if electric smokers available in the market today: The “Brinkmann Gourmet Electric Smoker” is completely painted in two different colors, such as black and red. There are one thousand five hundred watts to one thousand six hundred watts heating elements. It features a front hinged door for adding more water with ease and also a thermometer to measure the cooking counts. The Old Smokey electric smoker is available in the shape of a drum. It is entirely made with aluminum. It also is also available with two water tanks as well as with a zipper. It is the cheapest electric smoker available in the market. It produces heat in the same way an oven does and has a thermostat as well as a flat top. As the meat juice will be dripped down, cooking food with these smokers will be very delicious. The Charbroil electric water smoker is available with one thousand six hundred and fifty watts heating element, which will be controlled by a thermostat. These smokers have a wooden handle and can also become an electric brazier. Even though the smoking process with this apparatus is simple, this model can cook the meat tasty. It is one of the most affordable smokers you can find on the market. The Electric Smoker Meco is made of the stainless steel. Cheapo smoker is a great starter. You can easily add chips, pieces as well as pellets along with their doors, which is one the side of the smokers. It has a 1650 watt heater and under the controls of upper and middle position with a thermostat base. However, if you are looking for an option to cook with charcoal, you just have to remove the heating element of this electric smoker and start cooking with charcoal. The Cookshack electric smokers that are available in the market are obtainable with an adjustable temperature control from one hundred and fifty to three hundred degree Fahrenheit. The sealing design of the smoker is perfect to smoke chicken, meat or other foods ingredients, except the vegetables. “The Masterbuilt electric smoker” also has digital control system, which will help you to make your culinary masterpiece dishes. Its resistance could be controlled from 100 degrees to 275oF.

Mitsubishi Electric de Mexico S.A. de C.V. 5665 Plaza Drive, Cypress, California 90630-0007, U.S.A. 3400 Lawrenceville Suwanee Road, Suwanee, Georgia 30024, U.S.A. One Penn Plaza, 250 West 34th Street, Suite 4303, New York, New York 10119, U.S.A. 1560 Wilson Boulevard, Suite 1175, Arlington, Virginia 22209, U.S.A. 5665 Plaza Drive, P.O. Box 6007, Cypress, California 90630-0007, U.S.A. 201 Broadway, Cambridge, Massachusetts 02139, U.S.A. 530 Keystone Drive, Warrendale, Pennsylvania 15086-7537, U.S.A. 4600 Park Road, Suite 300, Charlotte, North Carolina 28209, U.S.A. 11100 Valley Boulevard, Suite 340-22, El Monte, California 91731, U.S.A. 1211 Avenue of The Americas, 43rd Floor, New York, New York 10036, U.S.A. 100 Colonial Center Parkway, Suite 250, Lake Mary, Florida 32746, U.S.A. 8606 Villa Crest, Crestwood, Missouri 63126, U.S.A. 9351 Jeronimo Road, Irvine, California 92618, U.S.A. 500 Corporate Woods Parkway, Vernon Hills, Illinois 60061, U.S.A. Highland Square, 50 Pearl Road, Suite 215, Brunswick, Ohio 44212, U.S.A. 2810 Premiere Parkway, Suite 400, Duluth, Georgia 30097, U.S.A. 1000 Nolen Drive, Suite 200 Grapevine, Texas 76051, U.S.A. 2218 North First Street, San Jose, California 95131, U.S.A. Vantage Ct. So., 200 Cottontail Ln., Somerset, New Jersey 08873, U.S.A. 4773 Bethany Road, Mason, Ohio 45040, U.S.A. 15603 Centennial Drive Northville, Michigan 48168, U.S.A. 1705 Downing Drive, Maysville, Kentucky 41056, U.S.A. 7345 Orangewood Avenue, Garden Grove, California 92841, U.S.A. 173 Pavilion Lane, Youngwood, Pennsylvania 15697, U.S.A. 1560 Wilson Boulevard, Suite 1150, Arlington, Virginia 22209, U.S.A. MELCO-TEC Rep. Com. e Assessoria Tecnica Ltda.

The solar panel is also called the photovoltaic panel; it is a device that works by converting the sunlight directly into the electrical energy. Solar panels are made on many solar cells and are interconnected with both series as well as the shunt configuration. Sun is a powerful planet and it has the ability to provide energy for the entire human living only if it is used in the right manner. For the past two decades, solar power has been used as an alternative to a source of energy and has played a beneficial role in development. The photoelectric effect theory of Einstein can be used to understand the operation of solar cells. First let’s try to understand the physical structure, a semiconductor device that has two or more than two doped layers for forming the junctions. These junctions show a response towards different wavelengths of sunlight and any other form of light that has small packets of energy called the photons. The sun has the ability to produce about 1000 watts per square meter. The solar cell produces a voltage that is very small and is not of any practical use, in order to overcome these many different solar cells are joined together to form a practical amount of energy. Each solar cell has the capacity to produce about 0.2A at 1.2V producing the output of 0.24W of power. A solar panel is formed with the connection of solar cells, and these solar panels on connection forms modules. In order to make homes and businesses in the UK more productive a Green deal has been finalized which helps in making improvement in productivity. It allows the person to get qualified to achieve free solar panels grants and the loans for solar energy in the UK. The green deal is a government program which works with the property owners and the private businesses to promote the ways to save energy and to get the efficiently produce energy. The home that wishes to get this deal, is being first analyzed and typical improvements are discussed and then the program helps the owner of the house to get them to achieve different ways to finance this improvement. There are many ways through which energy can be saved and in turn money and power will be saved. Kent solar power has Solar panels networks which include the network of many different companies that are working to deliver the best quality of the solar system and also to provide the cost-effective installation of the solar system in Kent. The solar panel network was made to provide a system that saves money and time for its customer. This network has the most experienced, certified installers that work best to provide the best installation to its suppliers. The solar panel network covers the whole UK for residential as well as for commercial customers.

In Alaska, something everyone must do is travel the Alaskan Railroad. It’s a smooth, relaxing ride in spacious cars that allow you to view the countryside. You meet wonderful people from all parts of the world and share the feeling that no amount of pictures can capture the excitement of America’s classy, traditional means of travel. Check back soon for another Denali activity update from Taylor!

Tour buses are pretty awesome, with a lot of companies and individuals using them to ferry people around cities or from place to place. Often, these tour buses have local guides with them to ensure that you and your party know the most about the area you are in. In order to get the most out of a DC tour bus excursion, you’ll have to follow a few rules, that way your bus experience will be a good one. First, always treat the driver with respect and care. They want to make the ride good for you and you should be making the same effort for them. Take the time to thank them, ask if they need anything, and be clear with where you want to go. When you and your party leave the bus, let the driver know when you will be back and keep that appointment to ensure that no one is late or left behind. Second, try to stay seated when the bus is moving. It’s almost like a school bus, so sit down, buckle up, and focus on your next destination. If there is food or drink on the bus, then try your best to keep the bus clean. No one wants to clean up your mess, so ensure that you leave as little as possible during your stay on and off the bus. Finally, when you are on the bus, don’t do anything or make any loud sounds to distract the driver. Again, treat the bus like it’s a school bus and then everything should be fine. Tour buses should be fun experiences and allow for you to travel across a city or area in style, and it’s even more fun when you treat the bus and its driver with respect.

* Year 12 and Year 13 entering in September 2017, fees will be frozen at Year 11 rate. This is subject to change in subsequent years. If a student withdraws prior to the start of the academic year, the balance of the first term’s fees paid will be refunded, except for the registration and deposit fees.

ers will need to understand the overall impact to claims, which is a function of the frequency of accidents, and it's likely that claims will decline with these systems," Blecher says. "On the other hand, repair costs could rise due to the technology required to support ADAS systems, especially since many ADAS sensors are placed in vulnerable portions of the vehicle, like the bumper and radiator grill. "The study is expected to be thorough, which means it won't be quick. It's projected to last for several years. It's not that I was suspicious. Should they also have used a dynamic analysis tool? If you take the time to read the full report, let me know your thoughts. Exonerating electronics leaves sticking accelerator pedals and accelerator pedals trapped by floor mats as the primary causes of unintended acceleration, at least for now. NHTSA and NASA plan to brief members of a National Academy of Sciences panel that is also studying unintended acceleration and electronic throttle control. And based on their findings, NHT.

A vintage Italian vase from the 1960s-70s by Bagni. This highly desirable decor is known as 'Sea Garden' and can more often be found in blues and greens. This is a more unusual colourway, though still of the sea. A vase of beautiful quality and weight, with great textural appeal. In excellent vintage condition, without any issues.

VBS Begins at 5:15 p.m. Potluck dinner at 7:15 p.m. VBS begins at 6:30 p.m. Vacation Bible School is a major production at Riverchase. It requires the services of over 150 volunteers to make sure everything happens on cue. We spend almost half the year making plans and setting the details in motion. Our volunteers bring the Bible to life. The kids who attend VBS never leave without having experienced the Bible. The kids leave with a feeling of excitement. Make your plans to join us each summer for learning more about God’s Word and His wonderful plan for your life and beyond!

Momentum is shifting bullish as the the EMAs start to cross over and MACD points up. With the way the stock is moving it could push towards and retest its all time high of 9.29. The 4 hour trendline has been broken. short toward monthly level of 1.27000 could be be reached within the week. gold had resisted from month res 5 times in the past few months. the potential for a break is very possible.

After the end of the successful pump trials, Kijigari fathers, mothers and children are back to traveling 20 - 30 miles a day in search of water. Yet water lies 180 meters at the bottom of a deep pipe installed right in their village. Every day Denis, Moumine, and I get messages from the villagers asking when we will be able to bring the water to the surface. They are counting the time, not in months or days, but in seconds and minutes. The lives of their children lie in our hands. Pure and permanent water in Kijigari is only $50,000 away. You can help Amman Imman make the water flow. Over the next two months we intend to build the water tower, pump, faucets and animal troughs - before the height of the dry season - BUT WE NEED YOUR HELP. Network, A Walk For Water and the Amman-a-thon have been named official Earth Day events. school. Contact info@ammanimman.org to find out how. Join an already planned Walk for Water event and raise funds by finding sponsors. Register here at www.active.com/donate/awalkforwater as events are added. Plan your own official A Walk For Water or Amman-a-thon Earth Day event in your community. Step-by-step guides are available. Visit www.ammanimman.org/walk to sign up. Help in your own creative and compassionate way. Please be a part of fulfilling the mothers' wishes, and help raise $50,000 to bring clean and plentiful water to their thirsty children by May.

The MAJORS, one of the most exclusive cheerleading competitions, announced the 26 teams who received and accepted an invitation to the 2019 event. For the first time, they added a Junior Combined division and three teams were invited. Check out the teams who will compete in this one-night, one-of-a-kind event. Do you need a full paid bid to win a medal at The Cheerleading Worlds, The Summit, or The D2 Summit?

An increase in the number of automobiles operating on the roadways has actually led to a remarkable boost in the number of car accidents likewise. In the middle of such unwanted events, suits and also criminal costs are bound to develop. As accidents are occasions having legal effects, the role of a lawyer is that of wonderful importance. Deadly vehicle crash legal representatives exist to aid a person documents or protect a lawsuit. A car crash attorney offers the offenders or cars and truck crash targets with details regarding the various functional and also lawful elements of injury law as well as auto accident insurance claims. It is a reality that virtually everyone on a standard is associated with at the very least one car mishap in his lifetime. Lawyers play a very important duty in fatal car mishaps. In such crashes, law may bill the culprits purely. It is the obligation of the attorney to represent his client in court. By using legal experience, a lawyer attempts to prevent or minimize the charges awarded by the law court. In a fatal car crash they might likewise be required to protect a suit. Unlike this, attorneys might also be hired by the targets in order to claim compensations for the damages. This settlement is gotten by submitting a lawsuit against the annoying party. In situation of a deadly cars and truck mishap, it is the duty of the lawyer to command the details of the suit. In the United States, legal representatives play the duty of counseling their clients regarding their rights, and suggest for the best passions of their customers.

When a number of dead fish are found in one place, the incident is referred to as a fish kill, and there is significant reason to suspect pollution. The three main causes of fish kills are poisoning, disease, and suffocation. ©Reuters New Media Inc./Corbis. Reproduced by permission. Fish may be poisoned by a wide range of polluting substances, including pesticides, acids, ammonia, phenols, cresols, compounds of metals, detergents, or cyanides. Many of these substances are used in industrial processes or in agriculture and are released through drains or are accidentally spilled into waterways. Acid rain, derived from industrial pollutants in the atmosphere, causes rivers to become toxic for various kinds of fish. Some types of toxic algal blooms kill fish. During the 1990s the dinoflagellate Pfeisteria piscicida caused fish kills, ranging from a few hundred to a million fish at one time, in estuaries of the southeastern United States. In natural environments, disease alone does not usually result in mass mortality, but under the artificial conditions of a hatchery or an aquaculture operation, disease can spread rapidly and cause a fish kill. The disease may be caused by viral infections, bacteria, fungi, or internal or external parasites. In these same natural environments, it is more common for fish to be weakened by disease and then killed en masse by some stressful environmental situation, such as low-oxygen concentration, temperature extremes, or pollution. When fish move from cold water into much warmer water such as a heated effluent from a generating station, bubbles may form in their tissues and they die from gas bubble disease. Suffocation occurs when the oxygen concentration in the water falls below the level at which fish can survive. A common cause is eutrophication, which is the artificial stimulation of plant growth by pollution with fertilizers, sewage, or atmospheric fallout. When the excess plant growth decays, it lowers the oxygen concentration. The discharge of dead organic matter into a watercourse from a sewer or from an industrial operation has the same effect. The accidental spilling of a herbicide into a lake or stream may kill large quantities of aquatic vegetation, causing low-oxygen conditions. Nuisance algal blooms may also cause suffocation. In 1994 in St. Helena Bay, South Africa, a large bloom of toxic and nontoxic algae formed in an estuary and extended into the open sea more than thirty kilometers out from the shore. The bloom sank and decomposed, forming an area with almost no oxygen and with lethal levels of hydrogen sulfide. Approximately fifteen hundred tons of dead fish and sixty tons of dead rock lobsters were washed ashore. Many fish kills could be prevented by reducing the amount of pollution, especially nitrogen and phosphorus, entering waterways. Applications of fertilizers should be matched to the needs of the crop, sewage effluent should receive advanced treatment, and atmospheric emissions from industry and transport should be carefully controlled at source. SEE ALSO A CID R AIN ; A GRICULTURE ; H YPOXIA ; O XYGEN D EMAND , B IOCHEMICAL ; P HOSPHATES ; T HERMAL P OLLUTION ; W ATER P OLLUTION ; W ATER P OLLUTION : M ARINE . Burkholder, J.M. (1999). "The Lurking Perils of Pfeisteria. " Scientific American 282:42–49. Meyer, Fred P., and Barclay, Lee A., eds. (1990). Field Manual for the Investigation of Fish Kills. Resource Publication 177. Washington, DC: U.S. Fish and Wildlife Service. "Fish Kills Offer Challenge to DEQ." Available from http://www.leeric.lsu.edu/le .

Studies are ongoing using Universal UV lamps. They chose Solacure as being the most sun-like lamp on the market. Goal is to test the effects of UV on sorghum. Study to take play in late 2017 or early 2018. When the University of Florida needed a UVB lamp strong enough to break down insecticides for the research and development, they chose Solacure.

A connection refers to any system that you want to integrate to or from. It may be a 365 Sales/CRM organization, a Dynamics NAV/GP on-premise solution, Salesforce instance or any of our available connectors. When you create that “connection” you are then able to use it in a data source or as a destination. Generic data sources such as Excel, Text or XML files do not require a separate connection to be setup. These do not count towards your connection limit. If you run two separate CRM instances for your organization then each one of these would be a connection. Test environments and development environments will require their own connections and will count towards your limit. You can upgrade during implementation and then downgrade when these connections are no longer required.

We all appreciate a good deal and some of us will go to the end of the earth trying to find that once in a lifetime purchase. Now it is a totally different topic wondering how much time spent is to much time and what your time is actually worth. However, when making any big purchase you need to steer far away from this instinctual behavior. It may be the easiest way to differentiate different quotes but trust me here it is not a good way to decide who you are going to use to complete the project. The best way to explain this is with a simple analogy. Most of us love a good meal and we will use surf and turf here since it is an American favorite. You cant make up where to have your birthday dinner party and are shopping around at several different restaurants to pick the best one. Low and behold you find a place where you can buy your favorite meal for only $6.99. What a deal! Would you feel comfortable having your family and friends dine at a place like this when everyone else was priced at $20+ per plate? Use the same logic outlined above when purchasing a new roof or similar project. When buying a new house or used card we have all been conditioned to follow this train of thought, it is time to apply it to the construction industry as well. If an estimate comes in way lower then the rest it is usually for one of a several reasons. First, they may be using inferior materials or cutting corners wherever possible. If you plan on keeping your property for any length of time the short term savings may not be worth the long term potential for major issues. Something as common as a little roof leak can cause wood rotting, structural issues, and mold growth all of which can be huge expenses to fix. Secondly, you may be dealing with amateurs that either don’t have much experience bidding jobs or are so desperate for work they will do anything. In this instance you are likely to be used for a training ground so that these newbies can hone their craft and pray for a good outcome. That or they may need to use the money from your down payment to purchase materials for another project they are building. It is typically a bad sign when they ask for a large amount of money up front and wont tell you when they will be able to start the work. Lastly, it is a common trick of the trade to throw out a low ball estimate to win the job and then try to up charge once firmly into the demolition. Roofing contractors often figure it is a lot easier to negotiate for more money from the customers when their roof is laying in the front yard. You want to make sure to focus on important aspects that often get overlooked. One of such things are company reviews. Do they have a good rating at the BBB? Are they listed on a site such as Angie’s List and do people have good things to say about them? Can they provide any personal references of local customers that are satisfied with the work completed? Some times it makes sense to pay a little bit more for work that you know is going to be done quickly and professionally. Make sure that the person you are going to hire is fully licensed and insured. Check the states website, such as this one for the state of Michigan, to make sure they do not have any outstanding violations. Most cities now require the contractor to provide all of this information before pulling a permit to protect the consumer so absolutely never agree to do this yourself for anyone. If they cant pull a permit themselves there is a reason for it and it isn’t good! Many contractors can no longer afford insurance as it is quite expensive and instead carry fake policies. Before signing a contract ask for a copy of their insurance policy and call the provider yourself to ensure it isn’t fraudulent. All it takes is one accident to occur on your property for you to lose everything to some low life that lied to you. It is not worth the risk and many people out there are just waiting to prey on unsuspecting victims in this manner. How much is to much for a down payment? I cant say that you should never give a contractor any money up front but I can say that it is the best way to protect yourself. Smaller companies or independent contractors wont strip a shingle off your roof without 50% or more down. Bigger companies are capable of paying for their own materials upfront and want to make sure you are completely satisfied before getting paid. This alone is worth a substantial amount as it gives you peace of mind that the work will be done in a timely fashion and up to your personal standards. It allows for you to keep your money in investments or savings accounts or stashed under the bed. Either way it is a much better feeling to have a little control of the project. There is nothing worse then handing several thousands dollars over to a stranger and then to have to constantly call them trying to figure out where they are and when they are going to start working. Again, this is not the deciding factor here but should be weighted heavily. Financing can be great for a number of reasons but that all depends on personal circumstances. When financing a new roof in Michigan for instance the rates are so competitive that it makes the most sense to take advantage of these programs while they are available. Michigan roofing loans are also available unsecured which means that the lender does not even place a lien on your property. This is a huge benefit that is even more important than interest rate because god forbid you have a lien placed it can be very difficult to get it removed if there are any disputes. More importantly, lenders are very careful which contractors they conduct business with. They do a thorough background check and even perform a financial audit in order to make sure everything is above board. That means you can typically feel confident in the company you have hire if they are able to provide you with a loan for that home improvement project. Have you ever taken out a loan for something like a new roof?

Head Mounted Eye Magnifier V5025 . Head Mounted Eye Magnifier (V5025). Another brilliant product brought to you from Proops Brothers Ltd. 1x, 1.5x, 2x, 2.5x, please choose from the drop down menu which magnification you need.

Cages require a relatively level surface for assembly. If the surface is a bit unlevel, there may be an additional charge to level the surface or add additional cover panels to close any possible avenues of escape. As to the type and finish of wood, if you want to economize and do-it-yourself, choose the rough and unfinished look. If you wish us to quote different options, please note these in comments section. Samples of the wire can be sent after the initial quote.

Dear Friend, items will be delivered without Original Box. We spare no effort to give the lowest price for our customers, so that we try our best to keep our price as competitive as possible. One of the ways to reduce the cost of the item is to reduce the shipping cost by shrinking the size of its packaging. After careful considerations and trial, we are able to reduce the packaging size by re-packaging it into a smaller box but not compromising on the shock protection of the product. In fact, the new, smaller, more efficient package is more resistant to rough handing.

Cute little six transistor radio made in Japan by Toshiba, and one of the smallest transistors out there. When you look inside, it is amazing how efficient Toshiba was to get all the electronics to fix. The radio takes three special 1.5 volt batteries (smaller than standard AA batteries) and worked when power was provided to it. It is a high quality set that even has a Pioneer speaker in it.

replica handbags online Most people who have traumatic brain injuries have spent months if not years undergoing rehabilitation. This involves coming to terms with their injuries (O Powell, and Oyebode, 2006) and the fact that they are no longer able to work. Many people with brain injuries, especially men, still feel they should be the but their injuries have meant they have been off often at a young age replica handbags online.

Testing Inflation with Hundreds of Fields Concordance or Contradiction? This blog post was written by Marc Manera. More than one million galaxies have been observed in the last three years by the 2.5 meter telescope at the Apache Point Observatory in New Mexico. In the picture above you can see the telescope (and me) just before sunset during a visit I made to the observatory some years ago. Some of the astronomers and cosmologists of the Sloan Digital Sky Survey had met nearby to discuss the science that can be done with the forthcoming observations – but now the data are already here. When you have observations of the position and colour of more than one million galaxies at your fingertips, there are a lot of questions about the universe that can be investigated. In this post I will focus on how we have measured the expansion of the universe using the distribution of galaxies from the BOSS survey, which is part of the Sloan Digital Sky Survey. BOSS – the Baryon Oscillation Spectroscopic Survey – has targeted 1.35 million galaxies covering approximately 10,000 square degrees. Galaxies are observed by setting optical fibres in the focal plane of the telescope. The light of each galaxy is then carried to a spectrograph where it is diffracted into a spectrum of wavelengths or frequencies i.e. colours – like a rainbow – and the data are stored. As the light travels from the galaxy where it was originally emitted to us, the spectrum of colours of the galaxies shifts towards the red; i.e., the galaxies appear “redder” than their original colour. We call this change in colour redshift, and we can measure it because we know the colour/frequency of a particular atomic transition as it would have been observed in the galaxies when it was emitted. The magnitude of the colour change – the redshift – is an important cosmological quantity, and tells us how much the universe has changed in size since that light was emitted. If the universe has doubled its volume since then, then the wavelength of the light that we observe will have doubled too. The figure above shows slices through the SDSS 3-dimensional map of the distribution of galaxies. The Earth is at the centre, and each point represents a galaxy, typically containing about 100 billion stars. The outer circle is at a distance of 2 billion light years. The wedges showing no galaxies were not mapped by the SDSS because dust in our own Galaxy obscures the view of the distant universe in this direction. Both slices contain all galaxies between -1.25 and 1.25 degrees declination. As the SDSS map shows, galaxies in the universe are not distributed randomly. Galaxies tend to cluster in groups of galaxies because they attract each other through gravity. Galaxies also have a particular separation at which they are more likely to be found; this separation is set by plasma physics – it is the Baryon Acoustic Oscillation characteristic distance – and we know it is about 4.5 x 1021 km. This is the distance that galaxies “like” to keep between themselves, in a typical sense. In the sky, for each set of galaxies that emitted their light at a particular moment during the expansion of the universe, the typical separation of the galaxies subtends a particular angle. Since we can calculate this separation between galaxies from physics (r) and the angle it subtends by observation (θ), using the basic geometry of a triangle we can work out the distance between us and these galaxies (d). This is illustrated in the final figure below. This shows a person observing two galaxies separated by a typical distance r. If we know then angle θ, we can measure the distance from us to the galaxies. Finally, because the speed of light in constant, we know how long ago the light from the galaxies was emitted, and thus we have all the information we need to deduce the expansion history of the universe. So to sum up, to work out the expansion rate of the universe we select several samples of galaxies; each sample will have emitted its light at a different time, and therefore it is at a different distance to us. We can measure this distance using simple geometry by observing the typical angle by which galaxies are separated. Once we have the distance to each sample of galaxies, we also have a measure of how long ago they emitted that light. Now, from the colours of the galaxies (the redshift) we also know how big the universe was at that time. For each set of galaxies we know the age of the universe at a particular moment and how big the universe was at that time. We have therefore determined the expansion history of the universe. This is exactly what the BOSS survey has done using three sets of galaxies at different distances.

The Salem, OH Senior Guide contains key statistics and information about how senior citizens in Salem live. Use this tool to compare healthcare quality, senior housing options, demographic and financial statistics, and other important data for Salem with the rest of the country. This guide also contains helpful contact information for local government agencies that offer assistance to senior citizens. Use these key statistics to learn more about Salem, OH seniors. Use our senior housing data to get a snapshot of the housing characteristics and living arrangements of the aging population in Salem, OH. 75% of males 65 and older are married compared with 37% of females. Overall, 1% of Salem senior households do not have access to phone service. Overall, 17% of Salem senior households do not have access to a vehicle. 8% of senior renters reside in a large development - one that has 50 or more units. View our Salem, OH financial data below to learn about the income, wealth and costs incurred of those seniors living in the community.

As one of the top-ranked antique billiard tables and accessories sites, this website redesign caters to increasing mobile usage, keeping up with Google’s mobile-friendly site initiative. By moving to a Content Management System, the amount of time required to update the site has improved and the added search feature enables visitors to peruse the collection of hundreds of tables and accessories. In addition, the web-to-email form now includes anti-spam CAPTCHA protection and the ability to handle attachments.

In Over and Under the Pond, readers will discover the plants and animals that make up the rich, interconnected ecosystem of a mountain pond. Over the pond, the water is a mirror, reflecting the sky. But under the pond is a hidden world of minnows darting, beavers diving, tadpoles growing. These and many other secrets are waiting to be discovered...over and under the pond.

Established in 1858, the Rutgers Chapter of Delta Upsilon is one of the most significant organizations on the banks of the Old Raritan. As the 3rd Fraternity to establish at Rutgers, Delta Upsilon revolutionized the concept of the Fraternity with its stance on non-secrecy. Since its conception, the chapter has endured a rich, meaningful history on campus and has graduated some of Rutgers' most notable and successful alumni. After a 20 year absence from the Rutgers Campus, DU was rechartered in May 2010. In just eight short years, DU has risen to become one of the largest, most active and most accomplished fraternities at Rutgers.

Porch protection is not just about protecting your property and creating a usable space. Looks are important too. With roll up porch curtains, you can compliment your home’s exterior. What Are Roll Up Porch Curtains? Roll up porch curtains are the main feature of a porch enclosure system for your home. The roll up panels cover the open spaces or “windows” on your porch. They are easy to roll up and down to allow in fresh air and regulate the temperature. Roll up porch curtains have colored polyester fabric at the top and bottom. The curtains are made of heavy duty marine grade vinyl that is easy to see through. Durable and resistant to mildew, they do not yellow. Adding porch protection to your home makes it look more unified. Windows are an important design feature in any home. People eyes naturally go towards windows and what is around them. Your roll up porch curtains basically function as a clear blind. While you can see through them, they provide a covering that protects the room from the natural elements. This gives you the advantage of seeing outside and enjoying the scenery or watching the kids play on their swing set. Roll up porch curtains come in a variety of colors. Choosing the right color is important. A color similar to your home will help your home look uniform, whereas a bright color will help your porch stand out. Make sure your colors don’t clash with the rest of the house. Also think about the size and position of your home. Lighter colors make a small home look bigger. Whereas darker colors tend to provide a focal point. One way to choose a color is to pick a complementary color that goes with your house or trim color. You can go on the website of any big box store and pull up a color wheel to find complementary colors. Find your house color, and then examine its complimentary colors on the wheel. This is a great strategy for incorporating porch protection system into your home’s design. Are You Ready to Dress up Your Porch? Do you want to be able to enjoy your porch all year round? Porch Protection Systems can help you get more out of your screened porch. Our custom porch curtain panels come in a variety of colors. Call us for more information at 302-629-4430, or visit our website to order your porch protection system today.

Long-term participants of the Arabloggers meetings will discuss what has changed, what has remained the same, and what’s next. What are the challenges faced by artists in the Arab world? The Internet gave an opportunity for activists to battle their dictators, but with the region’s shifting politics, it has now become a contested space where established groups of different ideologies also peddle their “products,” and disseminate their ideas via social media. What consequences will this have for online political activism in the region? What is the role of multistakeholder Internet governance structures in the Arab world?

Chicken cooked in a rich tomato sauce with noodles is a tasty dish and so easy to make. 2 ½ cups noodles (small square Greek noodles) or any pasta you like. Sauté the onion in a couple of tablespoonfuls of oil, and then add the chicken thighs and sauté them for about 5 minutes, both sides. Add the wine and let it boil until it evaporates. Place the thighs in a deep pan with the onion, minced clove of garlic, olive oil, tomatoes, concentrated tomato paste, salt and pepper and a cup of water. Bake them at 180o C for about an hour. When the thighs are done, remove them and put them on a plate. Add about 2 – 3 cups of water and put the pan back in the oven with some salt and pepper. When the water starts boiling, add the noodles. If you can’t find the small square noodles, you can use any other noodles you like (400 – 500 gr.). Stir well, and put the pan in the oven again. About 3 – 4 minutes later, stir again the noodles so they don’t stick to the bottom of the pan and to each other. Bake, keeping an eye on the water, and you may need to add some more hot water. Cook for about 25 minutes altogether. Taste to see if they are al dente. Towards the end of the cooking time, put the chicken thighs in the pan, on top of the noodles to warm them up. Serve hot with some grated cheese. A nice mizythra or kefalograviera are perfect with this dish. You can accompany it with a nice Greek salad or a mixed green salad.

Relevant and descriptive text alternatives are provided for all non-decorative images on this website. This is beneficial for users using assistive technologies (such as screen readers) or users who choose to turn images off in their browser. This can be activated by using the 'Change text size' links at the top of the page. There are 3 pre-set text sizes to choose from.

With the need to have an attracting dog, various Florida dog grooming facilities have been set up by various professionals in different parts of this state to help people who cannot groom dogs on their own at an affordable cost. Dog grooming is an important procedure which must be skillfully carried out as it can at times jeopardize a dog’s health. It involves series of procedures as each and every part of the dogs body must be well taken care of. In Florida, most facilities have proved to be trustworthy except for few centers which fail to perfect their role of grooming a dog. Just like other procedures such as hair dressing and skin care, dog grooming require professionals who have gone through the entire process by accomplishing all the required procedures of dog grooming process. They’re very many institutions which have been set up across Florida just for this and this has since guaranteed some with employment. According to Florida dog grooming facilities, the period of time taken to clean a dog may vary from either one to more than two hours depending on the size of the dog and the amount of fur found on the dog’s surface. Moreover, dealing with stubborn dogs may also increase the time period which can be used to groom a dog. This is because, there are some which tend to be very aggressive and stubborn and therefore dealing with them takes a relatively longer period of time. It is advisable to either skip the procedure or give the dog time to calm down. Grooming a dog involves trimming the nails, brushing the dog’s teeth, bathing and cleaning the dog’s ears. All these involves the use of specialized instruments and chemicals which will always ensure that the dog comes out of any Florida dog grooming facility a clean dog. There are a number of precautions which must be taken while grooming a dog. For instance, when it comes to clipping the nails, it is important to choose the recommended tools which can comfortably cut the dog’s nails while at the same time ensuring that the dogs nails does not bleed during the process as this can only lead to more infections. Brushing a dogs teeth requires recommended tooth brush which can clean the teeth effectively. In addition to this, there are specific tooth pastes designed for the purposes of cleaning the dog’s teeth. This helps to keep the teeth strong. Most Florida dog grooming facilities also offer bathing services and guidance to their members. This involves all the necessary equipment and detergents which can be used in the bathing process. In most cases, warm water is always preferred to cold water. They also offer ear cleaning services where they use cotton balls to remove the dirt which exist in the ear. Although there are very many Florida dog grooming facilities, this procedure can also be done at home but it is necessary to consult a professional so as to ensure that you don’t use chemicals which may have side effects on the pet.

Student in Master 1 in business school, I offer courses in mathematics, history / geography and English to college students. My classes are adapted to the needs of each student and according to their work habits. I am a dynamic person, smiling and listening to others. Being an active member of two associations within my school, I learned to adapt my work methods according to the personality of each. Important: my courses will be insured until early December 2017, after this period, leaving France, I will not be able to provide courses. In 2014 I obtained my baccalaureate option with honors. I was then in preparatory class in order to join a business school. At the end of September 2016, I joined SKEMA Business School (Lille Business School) where I am currently doing my Master 1. I already had the opportunity to give private lessons to high school students last year for a refresher course in mathematics.

This page is dedicated to listing together all pets, non-human companions and mounts in the same place. Note that these include captured monsters (familiars) and such. Also note that while Eidolons and their ilk could technically qualify for this description, they have their own dedicated listings here.