input stringclasses 1
value | instruction stringlengths 223 3.4k | output stringlengths 206 380 | category stringclasses 1
value | index stringclasses 1
value | fileName null |
|---|---|---|---|---|---|
{
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"ToolOther": "",
"WorkName": "逆流れ本体組立⑰(後面ｶﾞｽｹｯﾄ取付)",
"WorkItems": [
"1. ①にBRACKET をBOLT WASHER で取付(2個)",
"2. 1､完成品にGASKET GASKET GASKET GASKET GASKET GASKET GASKET を貼付"
],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "貼付確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "寸法の位置に貼付けている事",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "1000㎜",
"ToolOther": "",
"WorkName": "逆流れ本体組立⑱(左側面ｶﾞｽｹｯﾄ取付)",
"WorkItems": [
"1. GASKET を指定の長さにｶｯﾄする",
"2. ①にｶｯﾄしたGASKET を貼付する"
],
"WorkPoints": [
"左側面",
"1000mm 4本841mm 1本440mm 2本345mm 1本"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "貼付確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "寸法の位置に貼付けている事",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "600㎜",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉REAR)組立①",
"WorkItems": [
"1. FRAME にSUPPORT NUT NUT を取付"
],
"WorkPoints": [
"風船色ﾅｯﾄｻｲｽﾞ"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"M6",
"M5",
"M4",
"M3",
"ﾅｯﾄ挿入面",
"上側",
"×4",
"内側面"
]
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "作業指示の寸法である事",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉REAR)組立②",
"WorkItems": [
"1. FRAME にSUPPORT NUT を取付"
],
"WorkPoints": [
"風船色ﾅｯﾄｻｲｽﾞ"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"M6",
"M5",
"M4",
"M3",
"×2",
"ﾅｯﾄ挿入面",
"左側",
"×2",
"内側面"
]
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "作業指示の寸法である事",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉REAR)組立③",
"WorkItems": [
"1. FRAME にSUPPORT NUT を取付"
],
"WorkPoints": [
"風船色ﾅｯﾄｻｲｽﾞ",
"ﾌﾗｯﾄ面"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"M6",
"M5",
"M4",
"M3",
"上側",
"×4",
"内側面",
"×4",
"ﾅｯﾄ挿入面"
]
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "作業指示の寸法である事",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉REAR)組立④",
"WorkItems": [
"1. COVER にPACKING を取付"
],
"WorkPoints": [
"取っ手取付用穴",
"PACKING の折り返しの長い方を内側面に取付"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"内側面",
"L=810",
"L=405",
"L=810",
"L=405"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉REAR)組立⑤",
"WorkItems": [
"1. ⑤に①②③FRAME をBLOCK ⑦で取付"
],
"WorkPoints": [
"取っ手取付用穴",
"4角を付属のﾋﾞｽにて締結"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"内側面"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉REAR)組立⑥",
"WorkItems": [
"1. ①に⑥を⑦で取付"
],
"WorkPoints": [
"取っ手取付用穴"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"外側面"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉REAR)組立⑦",
"WorkItems": [
"2. ⑥に⑦を⑧⑨⑳で取付",
"■1. ⑦の型式を確認し､ｼﾘｱﾙNoを検査書に記入する"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 1.0N･m"
],
"InspectionNo": "WWYJ-5300-031",
"InspectionItems": [
"検査表①:安全部品確認"
],
"WorkTypes": [
"■安全作業"
],
"Words": [
"WWYJ-5300-031"
]
} | {
"QualityItem": "型式確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "型式が一致する事",
"Method": "目視",
"RecordMethod": "WWYJ-5300-031",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉REAR)組立⑦",
"WorkItems": [
"2. ⑥に⑦を⑧⑨⑳で取付",
"■1. ⑦の型式を確認し､ｼﾘｱﾙNoを検査書に記入する"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 1.0N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"検査表①:安全部品確認",
"WWYJ-5300-031"
]
} | {
"QualityItem": "製造番号記録",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "製造番号転記",
"Method": "目視",
"RecordMethod": "WWYJ-5300-031",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "ﾍｷｻﾛT20",
"ToolOther": "1.0N･m",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉REAR)組立⑦",
"WorkItems": [
"2. ⑥に⑦を⑧⑨⑳で取付",
"■1. ⑦の型式を確認し､ｼﾘｱﾙNoを検査書に記入する"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 1.0N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"検査表①:安全部品確認",
"■安全作業"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "1.0N･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉REAR)組立⑧",
"WorkItems": [
"1. ①に②を⑥⑳で取付"
],
"WorkPoints": [
"取っ手取付用穴"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"内側面"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉REAR)組立⑨",
"WorkItems": [
"1. ①に⑥⑦を⑧⑳㉑で取付"
],
"WorkPoints": [
"取っ手取付用穴"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"内側面"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉REAR)組立⑩",
"WorkItems": [
"1. ①に⑥を取付"
],
"WorkPoints": [
"取付方向注意",
"外側面から挿入し､ﾜﾝﾀｯﾁ留め具を押し込み固定"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"この作業では同じものを2個製作",
"内側面",
"外側面",
"押し込む方向"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "本体部AMﾌﾚｰﾑｷｯﾄUPPER3組立①",
"WorkItems": [
"1. FRAME にSUPPORT ･NUT ･NUT ･NUT ･CABLE-SUPPORT を取付し､BRACKET をBOLT ･WASHER で取付"
],
"WorkPoints": [
"風船色ﾅｯﾄｻｲｽﾞ",
"正面",
"下面",
"BRACKET は背面に取付",
"FRAME とNUT ･BRACKET は端面合わせで取付",
"FRAME とNUT ･BRACKET は端面合わせで取付",
"NUT は正面に取付し、㉘でNUT の固定ビスを締結",
"左面",
"上面",
"正面",
"下面",
"背面"
],
"Tolks": [
"締付ﾄﾙｸ11.5N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"N008:M6止めﾈｼﾞ付き",
"･は止めﾈｼﾞの方向を示す",
"M6",
"M5",
"M4",
"×10",
"×10",
"×2",
"×10"
]
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±1㎜",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "本体部AMﾌﾚｰﾑｷｯﾄUPPER3組立①",
"WorkItems": [
"1. FRAME にSUPPORT ･NUT ･NUT ･NUT ･CABLE-SUPPORT を取付し､BRACKET をBOLT ･WASHER で取付"
],
"WorkPoints": [
"風船色ﾅｯﾄｻｲｽﾞ",
"正面",
"下面",
"BRACKET は背面に取付",
"FRAME とNUT ･BRACKET は端面合わせで取付",
"FRAME とNUT ･BRACKET は端面合わせで取付",
"NUT は正面に取付し、㉘でNUT の固定ビスを締結",
"左面",
"上面",
"正面",
"下面",
"背面"
],
"Tolks": [
"締付ﾄﾙｸ11.5N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"N008:M6止めﾈｼﾞ付き",
"･は止めﾈｼﾞの方向を示す",
"M6",
"M5",
"M4",
"×10",
"×10",
"×2",
"×10"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "本体部AMﾌﾚｰﾑｷｯﾄUPPER3組立②",
"WorkItems": [
"1. ①にSUPPORT ･NUT ･NUT を取付"
],
"WorkPoints": [
"風船色ﾅｯﾄｻｲｽﾞ",
"左面",
"上面",
"正面",
"下面",
"上面",
"【注意】 下記取付け寸法は標準HEPA仕様の場合です",
"正面に追加"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"N005:M6止めﾈｼﾞ付き",
"･は止めﾈｼﾞの方向を示す",
"M6",
"M5",
"M4",
"×11",
"×8"
]
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±1㎜",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "逆流れﾌﾚｰﾑｷｯﾄL組立①",
"WorkItems": [
"1. FRAME にSUPPORT NUT NUT NUT NUT NUT CABLE-SUPPORT を取付け",
"2. 1.完成品にCAP CAP を取付"
],
"WorkPoints": [
"上面",
"外面",
"左面",
"内面",
"内面",
"右面",
"外面",
"左面",
"上面",
"内面",
"SUPPORT はNUT NUT NUT NUT NUT とｾｯﾄで使用",
"右面"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"NUT N012:M6止めﾈｼﾞ付き",
"･は止めﾈｼﾞの方向を示す",
"NUT N013:M4止めﾈｼﾞ付き",
"NUT N006:M6後入れ",
"NUT N007:M4後入れ",
"NUT N015:M3後入れ",
"CABLE-SUPPORT N011"
]
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "作業指示の寸法である事",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2㎜",
"ToolOther": "150cN･m",
"WorkName": "逆流れﾌﾚｰﾑｷｯﾄL組立②",
"WorkItems": [
"2. 1.完成品にCAP を取付け",
"1. ①にBRACKET BRACKET BRACKET BRACKET をWASHER BOLT で取付け"
],
"WorkPoints": [
"ｾｯﾄｽｸﾘｭｰ締め付け",
"ﾌﾞﾗｹｯﾄ固定後導通確保の為ｾｯﾄｽｸﾘｭｰを締め付ける",
"内面",
"右面",
"外面",
"左面",
"上面",
"右面",
"内面",
"左面",
"ｾｯﾄｽｸﾘｭｰ締め付け"
],
"Tolks": [
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 11.5N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"279㎜"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "150cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "逆流れﾌﾚｰﾑｷｯﾄL組立②",
"WorkItems": [
"2. 1.完成品にCAP を取付け",
"1. ①にBRACKET BRACKET BRACKET BRACKET をWASHER BOLT で取付け"
],
"WorkPoints": [
"ｾｯﾄｽｸﾘｭｰ締め付け",
"ﾌﾞﾗｹｯﾄ固定後導通確保の為ｾｯﾄｽｸﾘｭｰを締め付ける",
"内面",
"右面",
"外面",
"左面",
"上面",
"右面",
"内面",
"左面",
"ｾｯﾄｽｸﾘｭｰ締め付け"
],
"Tolks": [
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 11.5N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"279㎜"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N・m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "逆流れﾌﾚｰﾑｷｯﾄL組立③",
"WorkItems": [
"1. FRAME にSUPPORT NUT NUT NUT NUT CABLE-SUPPORT を取付け"
],
"WorkPoints": [
"上面",
"外面",
"左面",
"内面",
"内面",
"SUPPORT はNUT NUT NUT とｾｯﾄで使用",
"内面",
"右面",
"外面",
"左面",
"上面",
"右面"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"NUT N012:M6止めﾈｼﾞ付き",
"･は止めﾈｼﾞの方向を示す",
"NUT N006:M6後入れ",
"NUT N007:M4後入れ",
"CABLE-SUPPORT N011",
"NUT N013:M4止めﾈｼﾞ付き"
]
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "作業指示の寸法である事",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2㎜",
"ToolOther": "150cN･m",
"WorkName": "逆流れﾌﾚｰﾑｷｯﾄL組立④",
"WorkItems": [
"2. 1.完成品にCAP を取付け",
"1. ①にBRACKET BRACKET BRACKET をWASHER BOLT で取付け"
],
"WorkPoints": [
"ｾｯﾄｽｸﾘｭｰ締め付け",
"ﾌﾞﾗｹｯﾄ固定後導通確保の為ｾｯﾄｽｸﾘｭｰを締め付ける",
"内面",
"内面",
"右面",
"外面",
"左面",
"上面",
"左面",
"右面",
"ｾｯﾄｽｸﾘｭｰ締め付け"
],
"Tolks": [
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 11.5N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "150cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "逆流れﾌﾚｰﾑｷｯﾄL組立④",
"WorkItems": [
"2. 1.完成品にCAP を取付け",
"1. ①にBRACKET BRACKET BRACKET をWASHER BOLT で取付け"
],
"WorkPoints": [
"ｾｯﾄｽｸﾘｭｰ締め付け",
"ﾌﾞﾗｹｯﾄ固定後導通確保の為ｾｯﾄｽｸﾘｭｰを締め付ける",
"内面",
"内面",
"右面",
"外面",
"左面",
"上面",
"左面",
"右面",
"ｾｯﾄｽｸﾘｭｰ締め付け"
],
"Tolks": [
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 11.5N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N・m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "逆流れﾌﾚｰﾑｷｯﾄL組立⑤",
"WorkItems": [
"1. FRAME にSUPPORT NUT NUT を取付け"
],
"WorkPoints": [
"上面",
"外面",
"下面",
"内面",
"内面",
"SUPPORT はNUT NUT とｾｯﾄで使用",
"内面",
"下面",
"外面",
"上面",
"後面"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"NUT N012:M6止めﾈｼﾞ付き",
"･は止めﾈｼﾞの方向を示す",
"NUT N006:M6後入れ"
]
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "作業指示の寸法である事",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2㎜",
"ToolOther": "150cN･m",
"WorkName": "逆流れﾌﾚｰﾑｷｯﾄL組立⑥",
"WorkItems": [
"1. ①の下側にBRACKET をWASHER BOLT で取付け"
],
"WorkPoints": [
"下面",
"外面",
"上面",
"後面",
"①とBRACKET の端面を合わせる",
"内面",
"ﾌﾞﾗｹｯﾄ固定後導通確保の為ｾｯﾄｽｸﾘｭｰを締め付ける",
"ｾｯﾄｽｸﾘｭｰ締め付け",
"ｾｯﾄｽｸﾘｭｰ締め付け",
"下面"
],
"Tolks": [
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 11.5N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "150cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "逆流れﾌﾚｰﾑｷｯﾄL組立⑥",
"WorkItems": [
"1. ①の下側にBRACKET をWASHER BOLT で取付け"
],
"WorkPoints": [
"下面",
"外面",
"上面",
"後面",
"①とBRACKET の端面を合わせる",
"内面",
"ﾌﾞﾗｹｯﾄ固定後導通確保の為ｾｯﾄｽｸﾘｭｰを締め付ける",
"ｾｯﾄｽｸﾘｭｰ締め付け",
"ｾｯﾄｽｸﾘｭｰ締め付け",
"下面"
],
"Tolks": [
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 11.5N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N・m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "逆流れﾌﾚｰﾑｷｯﾄL組立⑦",
"WorkItems": [
"1. FRAME にSUPPORT NUT NUT CABLE-SUPPORT を取付け"
],
"WorkPoints": [
"外面",
"下面",
"内面",
"内面",
"SUPPORT はNUT NUT とｾｯﾄで使用",
"内面",
"下面",
"外面",
"上面",
"後面",
"上面"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"NUT N012:M6止めﾈｼﾞ付き",
"･は止めﾈｼﾞの方向を示す",
"NUT N006:M6後入れ",
"CABLE-SUPPORT N011"
]
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "作業指示の寸法である事",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2㎜",
"ToolOther": "150cN･m",
"WorkName": "逆流れﾌﾚｰﾑｷｯﾄL組立⑧",
"WorkItems": [
"1. ①にBRACKET BRACKET をWASHER BOLT で取付け"
],
"WorkPoints": [
"下面",
"BRACKET BRACKET と①の端面を合わせる",
"BRACKET は下面､BRACKET は上面に取付け",
"上面",
"ｾｯﾄｽｸﾘｭｰ締め付け",
"ｾｯﾄｽｸﾘｭｰ締め付け",
"ﾌﾞﾗｹｯﾄ固定後導通確保の為ｾｯﾄｽｸﾘｭｰを締め付ける"
],
"Tolks": [
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 150cN･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"追加工品",
"追加工品"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "150cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "2m",
"ToolOther": "",
"WorkName": "逆流れﾌﾚｰﾑｷｯﾄL組立⑨",
"WorkItems": [
"1. FRAME にSUPPORT NUT NUT を取付け"
],
"WorkPoints": [
"外面",
"下面",
"内面",
"SUPPORT はNUT NUT とｾｯﾄで使用",
"内面",
"下面",
"外面",
"上面",
"後面",
"上面",
"内面"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"NUT N012:M6止めﾈｼﾞ付き",
"･は止めﾈｼﾞの方向を示す",
"NUT N006:M6後入れ"
]
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "作業指示の寸法である事",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2㎜",
"ToolOther": "150cN･m",
"WorkName": "逆流れﾌﾚｰﾑｷｯﾄL組立⑩",
"WorkItems": [
"1. ①にBRACKET BRACKET をWASHER BOLT で取付け"
],
"WorkPoints": [
"下面",
"BRACKET BRACKET と①の端面を合わせる",
"BRACKET は下面､BRACKET は上面に取付け",
"上面",
"ｾｯﾄｽｸﾘｭｰ締め付け",
"ｾｯﾄｽｸﾘｭｰ締め付け",
"ﾌﾞﾗｹｯﾄ固定後導通確保の為ｾｯﾄｽｸﾘｭｰを締め付ける"
],
"Tolks": [
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 150cN･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"追加工品",
"追加工品"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "150cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "1000㎜",
"ToolOther": "",
"WorkName": "逆流れﾌﾚｰﾑｷｯﾄL組立⑪",
"WorkItems": [
"1. ①②③④⑤をWASHER BOLT で取付け"
],
"WorkPoints": [
"①と③の端面を合わせる",
"②と③の端面を合わせる",
"㉗定盤側に外面を合わせて組立てる",
"内面側",
"ﾌﾞﾗｹｯﾄ固定後導通確保の為ｾｯﾄｽｸﾘｭｰを締め付ける"
],
"Tolks": [
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 11.5N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"x10か所",
"715mm",
"320mm",
"220mm",
"ｾｯﾄｽｸﾘｭｰ締め付け",
"ｾｯﾄｽｸﾘｭｰ締め付け",
"ｾｯﾄｽｸﾘｭｰ締め付け",
"ｾｯﾄｽｸﾘｭｰ締め付け"
]
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法各±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2㎜",
"ToolOther": "150cN･m",
"WorkName": "逆流れﾌﾚｰﾑｷｯﾄL組立⑪",
"WorkItems": [
"1. ①②③④⑤をWASHER BOLT で取付け"
],
"WorkPoints": [
"①と③の端面を合わせる",
"②と③の端面を合わせる",
"㉗定盤側に外面を合わせて組立てる",
"内面側",
"ﾌﾞﾗｹｯﾄ固定後導通確保の為ｾｯﾄｽｸﾘｭｰを締め付ける"
],
"Tolks": [
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 11.5N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"x10か所",
"715mm",
"320mm",
"220mm",
"ｾｯﾄｽｸﾘｭｰ締め付け",
"ｾｯﾄｽｸﾘｭｰ締め付け",
"ｾｯﾄｽｸﾘｭｰ締め付け",
"ｾｯﾄｽｸﾘｭｰ締め付け"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "150cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "11.5N･m",
"WorkName": "逆流れﾌﾚｰﾑｷｯﾄL組立⑪",
"WorkItems": [
"1. ①②③④⑤をWASHER BOLT で取付け"
],
"WorkPoints": [
"①と③の端面を合わせる",
"②と③の端面を合わせる",
"㉗定盤側に外面を合わせて組立てる",
"内面側",
"ﾌﾞﾗｹｯﾄ固定後導通確保の為ｾｯﾄｽｸﾘｭｰを締め付ける"
],
"Tolks": [
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 11.5N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"x10か所",
"715mm",
"320mm",
"220mm",
"ｾｯﾄｽｸﾘｭｰ締め付け",
"ｾｯﾄｽｸﾘｭｰ締め付け",
"ｾｯﾄｽｸﾘｭｰ締め付け",
"ｾｯﾄｽｸﾘｭｰ締め付け"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "11.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "300㎜",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉大)組立①",
"WorkItems": [
"1. FRAME にSUPPORT ･NUT ･NUT を取付"
],
"WorkPoints": [
"風船色ﾅｯﾄｻｲｽﾞ"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"M6",
"M5",
"M4",
"M3",
"ﾅｯﾄ挿入面",
"上側",
"×4",
"内側"
]
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "作業指示の寸法である事",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉大)組立②",
"WorkItems": [
"1. FRAME にSUPPORT ･NUT を取付"
],
"WorkPoints": [
"風船色ﾅｯﾄｻｲｽﾞ"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"内側",
"×2",
"ﾅｯﾄ挿入面",
"右側",
"M6",
"M5",
"M4",
"M3"
]
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "作業指示の寸法である事",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉大)組立③",
"WorkItems": [
"1. PANEL にPACKING を取付"
],
"WorkPoints": [
"取っ手取付用穴",
"PACKING の折り返しの長い方を内側面に取付"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"内側面",
"L=370",
"L=590",
"L=370",
"L=590"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉大)組立④",
"WorkItems": [
"1. ⑤に①･②･FRAME ･FRAME をBLOCK で取付"
],
"WorkPoints": [
"取っ手取付用穴",
"4角を付属のﾋﾞｽにて締結"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"内側面"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉大)組立⑤",
"WorkItems": [
"2. ①にCOVER ･KEY をBOLT ･WASHER ･WASHER で取付",
"■1. KEY の型式を確認し､ｼﾘｱﾙNoを検査書に記入する"
],
"WorkPoints": [
"取っ手取付用穴",
"IC供給有りの場合実施する",
"下寄せで取付の事"
],
"Tolks": [],
"InspectionNo": "WWYJ-5300-032",
"InspectionItems": [
"検査表①:安全部品確認"
],
"WorkTypes": [
"■安全作業"
],
"Words": [
"内側面",
"調整ﾋﾞｽ",
"WWYJ-5300-032"
]
} | {
"QualityItem": "型式確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "型式が一致する事",
"Method": "目視",
"RecordMethod": "WWYJ-5300-032",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉大)組立⑤",
"WorkItems": [
"2. ①にCOVER ･KEY をBOLT ･WASHER ･WASHER で取付",
"■1. KEY の型式を確認し､ｼﾘｱﾙNoを検査書に記入する"
],
"WorkPoints": [
"取っ手取付用穴",
"IC供給有りの場合実施する",
"下寄せで取付の事"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"内側面",
"検査表①:安全部品確認",
"調整ﾋﾞｽ",
"WWYJ-5300-032"
]
} | {
"QualityItem": "製造番号記録",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "製造番号転記",
"Method": "目視",
"RecordMethod": "WWYJ-5300-032",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉大)組立⑥",
"WorkItems": [
"1. ①に⑥・⑦を⑧・⑳・㉑で取付"
],
"WorkPoints": [
"取っ手取付用穴",
"⑥･⑦はﾌﾚｰﾑ中央で垂直になる様に取付",
"IC供給有りの場合実施する"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"×2",
"×2",
"内側面",
"×2"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉大)組立⑦",
"WorkItems": [
"1. ①にPULL を取付"
],
"WorkPoints": [
"IC供給有りの場合実施する",
"取付方向注意",
"外側面から挿入し､ﾜﾝﾀｯﾁ留め具を押し込み固定"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"外側面",
"押し込む方向",
"内側面"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ﾌﾚｰﾑｷｯﾄ(扉大)組立⑧",
"WorkItems": [
"1. ①にHINGE をBOLT ･WASHER で取付"
],
"WorkPoints": [
"IC供給有りの場合実施する",
"取付方向注意",
"取付方向注意"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"×3",
"外側面",
"×3",
"×3",
"×3"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "左側ｼｬｯﾀｰｼｬﾌﾄの取付-1",
"WorkItems": [
"1. SHAFT のｼｬｯﾀｰｼｬﾌﾄのDｶｯﾄ片側にBOLT WASHER を取付ける",
"2. ｼｬｯﾀｰｼｬﾌﾄSHAFT を①のﾌﾟﾚｰﾄ穴に上下挿入する"
],
"WorkPoints": [
"左側下ﾌﾟﾚｰﾄ",
"ｼｬｯﾀｰｼｬﾌﾄ挿入穴",
"ｼｬｯﾀｰｼｬﾌﾄ挿入穴",
"Dｶｯﾄ部分をｼｬﾌﾄ取付ﾎﾞﾙﾄ側にする",
"Dｶｯﾄ部",
"Dｶｯﾄ部",
"SHAFT を上から挿入",
"ｼｬﾌﾄ取付ﾎﾞﾙﾄ",
"ｼｬﾌﾄ取付ﾎﾞﾙﾄ",
"左側上ﾌﾟﾚｰﾄ"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": []
} | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｼｯｸﾈｽｹﾞｰｼﾞ",
"Size": "0.01㎜",
"ToolOther": "",
"WorkName": "左側ｼｬｯﾀｰｼｬﾌﾄの取付-2",
"WorkItems": [],
"WorkPoints": [
"ｽﾄｯﾊﾟｰに当付け隙間無い事",
"0.01㎜ｼﾑが入ら無い事",
"ｼｬｯﾀｰを閉状態でｱｰﾑとｽﾄｯﾊﾟｰの隙間を確認する",
"ｽﾄｯﾊﾟｰに当付け隙間無い事"
],
"Tolks": [
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 3.2N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": []
} | {
"QualityItem": "隙間確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "0.01㎜のｼｯｸﾈｽｹﾞｰｼﾞが入ら無い事",
"Method": "ｼｯｸﾈｽｹﾞｰｼﾞ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "3㎜",
"ToolOther": "3.2N･m",
"WorkName": "左側ｼｬｯﾀｰｼｬﾌﾄの取付-2",
"WorkItems": [],
"WorkPoints": [
"ｽﾄｯﾊﾟｰに当付け隙間無い事",
"0.01㎜ｼﾑが入ら無い事",
"ｼｬｯﾀｰを閉状態でｱｰﾑとｽﾄｯﾊﾟｰの隙間を確認する",
"ｽﾄｯﾊﾟｰに当付け隙間無い事"
],
"Tolks": [
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 3.2N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "3.2N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2.5㎜",
"ToolOther": "150cN･m",
"WorkName": "左側ｼｬｯﾀｰｼｬﾌﾄの取付-2",
"WorkItems": [],
"WorkPoints": [
"ｽﾄｯﾊﾟｰに当付け隙間無い事",
"0.01㎜ｼﾑが入ら無い事",
"ｼｬｯﾀｰを閉状態でｱｰﾑとｽﾄｯﾊﾟｰの隙間を確認する",
"ｽﾄｯﾊﾟｰに当付け隙間無い事"
],
"Tolks": [
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 3.2N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "150cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "右側ｼｬｯﾀｰｼｬﾌﾄの取付-1",
"WorkItems": [
"1. SHAFT のｼｬｯﾀｰｼｬﾌﾄのDｶｯﾄ片側にBOLT WASHER を取付",
"2. 作業1完成品のｼｬｯﾀｰｼｬﾌﾄを①のﾌﾟﾚｰﾄ穴に上下挿入する"
],
"WorkPoints": [
"左側上ﾌﾟﾚｰﾄ",
"左側下ﾌﾟﾚｰﾄ",
"ｼｬｯﾀｰｼｬﾌﾄ挿入穴",
"ｼｬｯﾀｰｼｬﾌﾄ挿入穴",
"Dｶｯﾄ部分をｼｬﾌﾄ取付ﾎﾞﾙﾄ側にする",
"ｼｬﾌﾄ取付ﾎﾞﾙﾄ",
"Dｶｯﾄ部",
"ｼｬﾌﾄ取付ﾎﾞﾙﾄ",
"Dｶｯﾄ部",
"SHAFT を上から挿入"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": []
} | {
"QualityItem": "取付確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｼｯｸﾈｽｹﾞｰｼﾞ",
"Size": "0.01㎜",
"ToolOther": "",
"WorkName": "右側ｼｬｯﾀｰｼｬﾌﾄの取付-2",
"WorkItems": [],
"WorkPoints": [
"ｽﾄｯﾊﾟｰに当付け隙間無い事",
"0.01㎜ｼﾑが入ら無い事",
"負荷がかからないよう固定の事",
"ｽﾄｯﾊﾟｰに当付け隙間無い事",
"ｼｬｯﾀｰを閉状態でｱｰﾑとｽﾄｯﾊﾟｰの隙間を確認する"
],
"Tolks": [
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 3.2N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"ｽﾄｯﾊﾟｰ",
"ｱｰﾑ",
"ｽﾄｯﾊﾟｰ",
"ｱｰﾑ"
]
} | {
"QualityItem": "隙間確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "0.01㎜のｼｯｸﾈｽｹﾞｰｼﾞが入ら無い事",
"Method": "ｼｯｸﾈｽｹﾞｰｼﾞ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "3㎜",
"ToolOther": "3.2N･m",
"WorkName": "右側ｼｬｯﾀｰｼｬﾌﾄの取付-2",
"WorkItems": [],
"WorkPoints": [
"ｽﾄｯﾊﾟｰに当付け隙間無い事",
"0.01㎜ｼﾑが入ら無い事",
"負荷がかからないよう固定の事",
"ｽﾄｯﾊﾟｰに当付け隙間無い事",
"ｼｬｯﾀｰを閉状態でｱｰﾑとｽﾄｯﾊﾟｰの隙間を確認する"
],
"Tolks": [
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 3.2N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"ｽﾄｯﾊﾟｰ",
"ｱｰﾑ",
"ｽﾄｯﾊﾟｰ",
"ｱｰﾑ"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "3.2N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2.5㎜",
"ToolOther": "150cN･m",
"WorkName": "右側ｼｬｯﾀｰｼｬﾌﾄの取付-2",
"WorkItems": [],
"WorkPoints": [
"ｽﾄｯﾊﾟｰに当付け隙間無い事",
"0.01㎜ｼﾑが入ら無い事",
"負荷がかからないよう固定の事",
"ｽﾄｯﾊﾟｰに当付け隙間無い事",
"ｼｬｯﾀｰを閉状態でｱｰﾑとｽﾄｯﾊﾟｰの隙間を確認する"
],
"Tolks": [
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 150cN･m",
"締付ﾄﾙｸ 3.2N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"ｽﾄｯﾊﾟｰ",
"ｱｰﾑ",
"ｽﾄｯﾊﾟｰ",
"ｱｰﾑ"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "150cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｶﾞｲﾄﾞ平行出し治具",
"Size": "",
"ToolOther": "FM-4839",
"WorkName": "ｼｬｯﾀｰｼｬﾌﾄ位置調整-1(ﾒｶｽﾄｯﾊﾟｰ位置)",
"WorkItems": [
"1. ①のﾘﾌﾄ軸をﾒｶｽﾄｯﾊﾟｰ位置(原点)まで下降する",
"2. 治具をｾｯﾄする"
],
"WorkPoints": [
"治具を当付け隙間無い事",
"下段23段目付近"
],
"Tolks": [
"締付ﾄﾙｸ 1.9N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": []
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-4839",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｼｯｸﾈｽｹﾞｰｼﾞ",
"Size": "0.02㎜",
"ToolOther": "",
"WorkName": "ｼｬｯﾀｰｼｬﾌﾄ位置調整-1(ﾒｶｽﾄｯﾊﾟｰ位置)",
"WorkItems": [
"1. ①のﾘﾌﾄ軸をﾒｶｽﾄｯﾊﾟｰ位置(原点)まで下降する",
"2. 治具をｾｯﾄする"
],
"WorkPoints": [
"治具を当付け隙間無い事",
"下段23段目付近"
],
"Tolks": [
"締付ﾄﾙｸ 1.9N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": []
} | {
"QualityItem": "隙間確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "0.02㎜のｼｯｸﾈｽｹﾞｰｼﾞが入ら無い事",
"Method": "ｼｯｸﾈｽｹﾞｰｼﾞ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "3㎜",
"ToolOther": "1.9N･m",
"WorkName": "ｼｬｯﾀｰｼｬﾌﾄ位置調整-1(ﾒｶｽﾄｯﾊﾟｰ位置)",
"WorkItems": [
"1. ①のﾘﾌﾄ軸をﾒｶｽﾄｯﾊﾟｰ位置(原点)まで下降する",
"2. 治具をｾｯﾄする"
],
"WorkPoints": [
"治具を当付け隙間無い事",
"下段23段目付近"
],
"Tolks": [
"締付ﾄﾙｸ 1.9N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "1.9N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｶﾞｲﾄﾞ平行出し治具",
"Size": "",
"ToolOther": "FM-4839",
"WorkName": "ｼｬｯﾀｰｼｬﾌﾄ位置調整-2(LMｶﾞｲﾄﾞ上端位置)",
"WorkItems": [
"2. 治具をｾｯﾄする"
],
"WorkPoints": [
"治具を当付け隙間無い事",
"NG排出段付近"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": []
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-4839",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｼｯｸﾈｽｹﾞｰｼﾞ",
"Size": "0.02㎜",
"ToolOther": "",
"WorkName": "ｼｬｯﾀｰｼｬﾌﾄ位置調整-2(LMｶﾞｲﾄﾞ上端位置)",
"WorkItems": [
"2. 治具をｾｯﾄする"
],
"WorkPoints": [
"治具を当付け隙間無い事",
"NG排出段付近"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": []
} | {
"QualityItem": "隙間確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "0.02㎜のｼｯｸﾈｽｹﾞｰｼﾞが入ら無い事",
"Method": "ｼｯｸﾈｽｹﾞｰｼﾞ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "3㎜",
"ToolOther": "1.9N･m",
"WorkName": "ｼｬｯﾀｰｼｬﾌﾄ位置調整-2(LMｶﾞｲﾄﾞ上端位置)",
"WorkItems": [],
"WorkPoints": [
"ｼｬﾌﾄを治具に当付ける"
],
"Tolks": [
"締付ﾄﾙｸ 1.9N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"上面"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "1.9N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｶﾞｲﾄﾞ平行出し治具",
"Size": "",
"ToolOther": "FM-4839",
"WorkName": "ｼｬｯﾀｰｼｬﾌﾄ位置調整-3(隙間確認)",
"WorkItems": [
"1. 各隙間を確認する"
],
"WorkPoints": [
"①②:t0.05③④:t0.02",
"NG排出部:t0.05上23段目 :t0.15ﾒｶｽﾄ :t0.05",
"各位置､各個所でｼｯｸﾈｽｹﾞｰｼﾞが通らないこと"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"NG排出位置",
"上23段目位置",
"ﾒｶｽﾄ位置",
"検査表①:ｼｬﾌﾄ位置の確認/ﾄﾚｲ側"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-4839",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｼｯｸﾈｽｹﾞｰｼﾞ",
"Size": "0.02㎜",
"ToolOther": "",
"WorkName": "ｼｬｯﾀｰｼｬﾌﾄ位置調整-3(隙間確認)",
"WorkItems": [
"1. 各隙間を確認する"
],
"WorkPoints": [
"①②:t0.05③④:t0.02",
"NG排出部:t0.05上23段目 :t0.15ﾒｶｽﾄ :t0.05",
"各位置､各個所でｼｯｸﾈｽｹﾞｰｼﾞが通らないこと"
],
"Tolks": [],
"InspectionNo": "WEMA-G002-C12",
"InspectionItems": [
"検査表①:ｼｬﾌﾄ位置の確認/ﾄﾚｲ側"
],
"WorkTypes": [],
"Words": [
"NG排出位置",
"上23段目位置",
"ﾒｶｽﾄ位置",
"WEMA-G002-C12"
]
} | {
"QualityItem": "隙間確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "0.02㎜のｼｯｸﾈｽｹﾞｰｼﾞが入ら無い事",
"Method": "ｼｯｸﾈｽｹﾞｰｼﾞ",
"RecordMethod": "WEMA-G002-C12",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｼｯｸﾈｽｹﾞｰｼﾞ",
"Size": "0.02㎜",
"ToolOther": "",
"WorkName": "ｼｬｯﾀｰｼｬﾌﾄ位置調整-3(隙間確認)",
"WorkItems": [
"1. 各隙間を確認する"
],
"WorkPoints": [
"①②:t0.05③④:t0.02",
"NG排出部:t0.05上23段目 :t0.15ﾒｶｽﾄ :t0.05",
"各位置､各個所でｼｯｸﾈｽｹﾞｰｼﾞが通らないこと"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"NG排出位置",
"上23段目位置",
"ﾒｶｽﾄ位置",
"検査表①:ｼｬﾌﾄ位置の確認/ﾄﾚｲ側",
"WEMA-G002-C12"
]
} | {
"QualityItem": "隙間確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "0.05㎜のｼｯｸﾈｽｹﾞｰｼﾞが入ら無い事",
"Method": "ｼｯｸﾈｽｹﾞｰｼﾞ",
"RecordMethod": "WEMA-G002-C12",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｼｯｸﾈｽｹﾞｰｼﾞ",
"Size": "0.02㎜",
"ToolOther": "",
"WorkName": "ｼｬｯﾀｰｼｬﾌﾄ位置調整-3(隙間確認)",
"WorkItems": [
"1. 各隙間を確認する"
],
"WorkPoints": [
"①②:t0.05③④:t0.02",
"NG排出部:t0.05上23段目 :t0.15ﾒｶｽﾄ :t0.05",
"各位置､各個所でｼｯｸﾈｽｹﾞｰｼﾞが通らないこと"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"NG排出位置",
"上23段目位置",
"ﾒｶｽﾄ位置",
"検査表①:ｼｬﾌﾄ位置の確認/ﾄﾚｲ側",
"WEMA-G002-C12"
]
} | {
"QualityItem": "隙間確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "0.15㎜のｼｯｸﾈｽｹﾞｰｼﾞが入ら無い事",
"Method": "ｼｯｸﾈｽｹﾞｰｼﾞ",
"RecordMethod": "WEMA-G002-C12",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾚｲ完成品ﾁｪｯｶｰ",
"Size": "",
"ToolOther": "FM-5247",
"WorkName": "ﾁｪｯｶｰの接続と立ち上げ",
"WorkItems": [
"1. ﾄﾚｲ本体とﾁｪｯｶｰの接続",
"2. ﾁｪｯｶｰのﾊﾟｿｺﾝの立ち上げ",
"3. PC画面が立ち上がったらNPM-WXのｱｲｺﾝをﾀﾞﾌﾞﾙｸﾘｯｸ",
"4. ﾁｪｯｶｰの電源BOXのSWをON",
"5. ｼｽﾃﾑ立ち上げ"
],
"WorkPoints": [
"･ﾁｪｯｶｰ電源接続･ﾒｲﾝｴｱｰ接続･ｴｱｰ配管･ｺﾈｸﾀｰ大-TRAY･S ･･･内側 ･ｺﾈｸﾀｰ小-TRAY･P ･･･外側 各々接続",
"FM-2294",
"ﾊﾞｰｺｰﾄﾞﾘｰﾀﾞｰがUSBﾎﾟｰﾄに挿入されているのを確認する",
"ﾄﾚｲﾌｨｰﾀﾞｰ本体の電源が入り待機状態になる",
"部署等を入力",
"ﾊﾞｰｺｰﾄﾞﾘｰﾀﾞｰでQRｺｰﾄﾞを読み取り",
"ﾊﾞｰｺｰﾄﾞ情報入力",
"PnP情報書込み",
"PnP情報書込み完了",
"ON"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": []
} | {
"QualityItem": "手順確認",
"ToolManageNo": "FM-5247",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通りの手順である事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾚｲ完成品ﾁｪｯｶｰ",
"Size": "",
"ToolOther": "FM-5247",
"WorkName": "TP軸原点登録-1",
"WorkItems": [
"1. TP軸のﾊﾟﾜｰON",
"2. TP軸仮原点登録",
"1. TP軸のﾊﾟﾜｰON",
"2. TP軸仮原点登録"
],
"WorkPoints": [
"ﾊﾟﾜ-OFFでﾚﾊﾞｰを原点付近へ動かす",
"画面上で①②③④のﾎﾞﾀﾝを順次押すとﾊﾟﾜｰONとする",
"② ﾚﾊﾞｰが原点を探し動き始め原点確認後停止する",
"① TP軸の原点復帰を押す",
"ﾊﾟﾜ-OFFでﾚﾊﾞｰを原点付近へ動かす",
"画面上で①②③④のﾎﾞﾀﾝを順次押すとﾊﾟﾜｰONとする",
"② ﾚﾊﾞｰが原点を探し動き始め原点確認後停止する",
"① TP軸の原点復帰を押す"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": []
} | {
"QualityItem": "手順確認",
"ToolManageNo": "FM-5247",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通りの手順である事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"ToolOther": "",
"WorkName": "TP軸原点登録-1",
"WorkItems": [
"1. TP軸のﾊﾟﾜｰON",
"2. TP軸仮原点登録"
],
"WorkPoints": [
"ﾊﾟﾜ-OFFでﾚﾊﾞｰを原点付近へ動かす",
"画面上で①②③④のﾎﾞﾀﾝを順次押すとﾊﾟﾜｰONとする",
"② ﾚﾊﾞｰが原点を探し動き始め原点確認後停止する",
"① TP軸の原点復帰を押す"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": []
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "148.5㎜±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"ToolOther": "",
"WorkName": "TP軸原点登録-1",
"WorkItems": [
"1. TP軸のﾊﾟﾜｰON",
"2. TP軸仮原点登録"
],
"WorkPoints": [
"ﾊﾟﾜ-OFFでﾚﾊﾞｰを原点付近へ動かす",
"画面上で①②③④のﾎﾞﾀﾝを順次押すとﾊﾟﾜｰONとする",
"② ﾚﾊﾞｰが原点を探し動き始め原点確認後停止する",
"① TP軸の原点復帰を押す"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": []
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "1.0㎜±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾚｲ完成品ﾁｪｯｶｰ",
"Size": "",
"ToolOther": "FM-5247",
"WorkName": "TP軸原点登録-2",
"WorkItems": [
"1. TP軸原点復帰を行う",
"2. ﾒｶｽﾄよりﾌﾞﾗｹｯﾄ端面148.5mm位置を確認"
],
"WorkPoints": [
"･ｾﾝｻｰ光軸より1㎜位置･ﾒｶｽﾄよりﾌﾞﾗｹｯﾄ端面148.5mm位置この2か所を満たしていればOK"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"148.5㎜",
"ﾒｶｽﾄｯﾊﾟｰ",
"ﾌﾞﾗｹｯﾄ端面",
"検査表①:引き出軸のｽﾄﾛｰｸ確認"
]
} | {
"QualityItem": "手順確認",
"ToolManageNo": "FM-5247",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通りの手順である事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"ToolOther": "",
"WorkName": "TP軸原点登録-2",
"WorkItems": [],
"WorkPoints": [
"･ｾﾝｻｰ光軸より1㎜位置･ﾒｶｽﾄよりﾌﾞﾗｹｯﾄ端面148.5mm位置この2か所を満たしていればOK"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"148.5㎜",
"ﾒｶｽﾄｯﾊﾟｰ",
"ﾌﾞﾗｹｯﾄ端面",
"検査表①:引き出軸のｽﾄﾛｰｸ確認"
]
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "148.5㎜±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"ToolOther": "",
"WorkName": "TP軸原点登録-2",
"WorkItems": [],
"WorkPoints": [
"･ｾﾝｻｰ光軸より1㎜位置･ﾒｶｽﾄよりﾌﾞﾗｹｯﾄ端面148.5mm位置この2か所を満たしていればOK"
],
"Tolks": [],
"InspectionNo": "WEAV-G002-C36",
"InspectionItems": [
"検査表①:引き出軸のｽﾄﾛｰｸ確認"
],
"WorkTypes": [],
"Words": [
"148.5㎜",
"ﾒｶｽﾄｯﾊﾟｰ",
"ﾌﾞﾗｹｯﾄ端面"
]
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "1.0㎜±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾚｲ完成品ﾁｪｯｶｰ",
"Size": "",
"ToolOther": "FM-5247",
"WorkName": "TL軸とﾊﾟﾚｯﾄｽﾄｯｸ部の高さ調整-1",
"WorkItems": [
"1. ﾊﾟﾜｰONを行う",
"2. TL軸原点復帰を行う",
"1. ﾊﾟﾜｰONを行う",
"2. TL軸原点復帰を行う"
],
"WorkPoints": [
"引き出部のﾚﾊﾞｰを原点付近へ動かす",
"画面上で①②③④のﾎﾞﾀﾝを順次押すとﾊﾟﾜｰONとなる",
"FM-2848治具が取付いて無い事を確認｡ﾚﾊﾞｰが回転して危険です",
"引き出部のﾚﾊﾞｰを原点付近へ動かす",
"画面上で①②③④のﾎﾞﾀﾝを順次押すとﾊﾟﾜｰONとなる",
"FM-2848治具が取付いて無い事を確認｡ﾚﾊﾞｰが回転して危険です",
"原点位置まで下降する"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": []
} | {
"QualityItem": "手順確認",
"ToolManageNo": "FM-5247",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通りの手順である事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾚｲ完成品ﾁｪｯｶｰ",
"Size": "",
"ToolOther": "FM-5247",
"WorkName": "TL軸とﾊﾟﾚｯﾄｽﾄｯｸ部の高さ調整-2",
"WorkItems": [],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"A-A断面",
"測定位置(上面から見た図)",
"下23段目",
"引き出部",
"A1A0A2",
"引き出部搬送面",
"下23段目",
"治具ﾊﾟﾚｯﾄ",
"治具ﾊﾟﾚｯﾄ",
"※1"
]
} | {
"QualityItem": "手順確認",
"ToolManageNo": "FM-5247",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通りの手順である事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "治具ﾊﾟﾚｯﾄ",
"Size": "",
"ToolOther": "FM-5946",
"WorkName": "TL軸とﾊﾟﾚｯﾄｽﾄｯｸ部の高さ調整-2",
"WorkItems": [
"1. 治具をｾｯﾄする",
"2. ﾊﾟﾚｯﾄｽﾄｯｸ部の治具の中央(A0)高さに引き出部を基準に測定し確認"
],
"WorkPoints": [
"下段23段目と引き出軸",
"測定ﾎﾟｲﾝﾄ A0･A1･A2 を測定する"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"A-A断面",
"測定位置(上面から見た図)",
"下23段目",
"引き出部",
"A1A0A2",
"引き出部搬送面",
"下23段目",
"治具ﾊﾟﾚｯﾄ",
"治具ﾊﾟﾚｯﾄ",
"※1"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-5946",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "てこ式ﾀﾞｲﾔﾙｹﾞｰｼﾞ",
"Size": "1/100",
"ToolOther": "",
"WorkName": "TL軸とﾊﾟﾚｯﾄｽﾄｯｸ部の高さ調整-2",
"WorkItems": [],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"A-A断面",
"測定位置(上面から見た図)",
"下23段目",
"引き出部",
"A1A0A2",
"引き出部搬送面",
"下23段目",
"治具ﾊﾟﾚｯﾄ",
"治具ﾊﾟﾚｯﾄ",
"※1"
]
} | {
"QualityItem": "高さ確認",
"ToolManageNo": "-",
"ToolCycle": "1回/半年",
"ToolRecord": "校正成績書",
"StdVal": "指示通り測定する事",
"Method": "てこ式ﾀﾞｲﾔﾙｹﾞｰｼﾞ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾘﾌﾄ軸ﾌﾞﾚｰｷ付きﾊﾝﾄﾞﾙ",
"Size": "",
"ToolOther": "FM-2848",
"WorkName": "TL軸とﾊﾟﾚｯﾄｽﾄｯｸ部の高さ調整-2",
"WorkItems": [
"3. ﾘﾌﾄ上下治具を取付ける"
],
"WorkPoints": [
"FM-2848",
"この時の高さの差を把握する事"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"A 2",
"A 0",
"A 1"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-2848",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾚｲ完成品ﾁｪｯｶｰ",
"Size": "",
"ToolOther": "FM-5247",
"WorkName": "TL軸とﾊﾟﾚｯﾄｽﾄｯｸ部の高さ調整-3",
"WorkItems": [
"1. ﾎﾞｰﾙﾈｼﾞ下のﾀｲﾐﾝｸﾞﾌﾟｰﾘｰを緩める",
"2. 治具上のﾋﾟｯｸの目盛りに注意しﾚﾊﾞｰを回し高さを合わせる",
"3. ｶｯﾌﾟﾘﾝｸﾞを締付"
],
"WorkPoints": [
"A1･A2の段差:±0.2㎜以内A1･A2の差 :0.1㎜以下",
"FM-2848"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"緩める",
"FM-5946",
"引き出部搬送面",
"下段23ｽﾛｯﾄ高さ",
"FM-5946",
"ﾊﾟﾚｯﾄｽﾄｯｸ部",
"引き出部",
"A1A2",
"締める"
]
} | {
"QualityItem": "手順確認",
"ToolManageNo": "FM-5247",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通りの手順である事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾘﾌﾄ軸ﾌﾞﾚｰｷ付きﾊﾝﾄﾞﾙ",
"Size": "",
"ToolOther": "FM-2848",
"WorkName": "TL軸とﾊﾟﾚｯﾄｽﾄｯｸ部の高さ調整-3",
"WorkItems": [
"1. ﾎﾞｰﾙﾈｼﾞ下のﾀｲﾐﾝｸﾞﾌﾟｰﾘｰを緩める",
"2. 治具上のﾋﾟｯｸの目盛りに注意しﾚﾊﾞｰを回し高さを合わせる",
"3. ｶｯﾌﾟﾘﾝｸﾞを締付",
"4. ﾘﾌﾄ上下治具を取り外し"
],
"WorkPoints": [
"A1･A2の段差:±0.2㎜以内A1･A2の差 :0.1㎜以下",
"FM-2848",
"FM-2848"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"緩める",
"FM-5946",
"引き出部搬送面",
"下段23ｽﾛｯﾄ高さ",
"FM-5946",
"ﾊﾟﾚｯﾄｽﾄｯｸ部",
"引き出部",
"A1A2",
"締める"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-2848",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "治具ﾊﾟﾚｯﾄ",
"Size": "",
"ToolOther": "FM-5946",
"WorkName": "TL軸とﾊﾟﾚｯﾄｽﾄｯｸ部の高さ調整-3",
"WorkItems": [],
"WorkPoints": [
"A1･A2の段差:±0.2㎜以内A1･A2の差 :0.1㎜以下"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"FM-5946",
"引き出部搬送面",
"下段23ｽﾛｯﾄ高さ",
"FM-5946",
"ﾊﾟﾚｯﾄｽﾄｯｸ部",
"引き出部",
"A1A2"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-5946",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "てこ式ﾀﾞｲﾔﾙｹﾞｰｼﾞ",
"Size": "1/100",
"ToolOther": "",
"WorkName": "TL軸とﾊﾟﾚｯﾄｽﾄｯｸ部の高さ調整-3",
"WorkItems": [],
"WorkPoints": [
"A1･A2の段差:±0.2㎜以内A1･A2の差 :0.1㎜以下"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"FM-5946",
"引き出部搬送面",
"下段23ｽﾛｯﾄ高さ",
"FM-5946",
"ﾊﾟﾚｯﾄｽﾄｯｸ部",
"引き出部",
"A1A2"
]
} | {
"QualityItem": "段差確認",
"ToolManageNo": "-",
"ToolCycle": "1回/半年",
"ToolRecord": "校正成績書",
"StdVal": "A1,A2の段差±0.2㎜以内A1､A2の差0.1㎜以内",
"Method": "てこ式ﾀﾞｲﾔﾙｹﾞｰｼﾞ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾚｲ完成品ﾁｪｯｶｰ",
"Size": "",
"ToolOther": "FM-5247",
"WorkName": "TL軸ﾏｲﾅｽﾘﾐｯﾄの調整-1(ｵﾌｾｯﾄ値入力-1)",
"WorkItems": [
"1. TL軸の原点復帰を行う",
"2. 原点復帰完了を押す",
"3. ｵﾌｾｯﾄ値の確認",
"4. 連結位置へTL軸を上げる",
"5. 連結位置でTL軸原点ｵﾌｾｯﾄﾃｨｰﾁを押す",
"6. TL軸原点ｵﾌｾｯﾄﾃｨｰﾁ画面に -1.0㎜のｵﾌｾｯﾄ値を入力"
],
"WorkPoints": [
"TP軸･TL軸ともに\"0\"となっている事",
"\"OK\"を押すとTL軸が上昇するので手を挟まない様に注意",
"-0.5㎜づつ入力される",
"次ﾍﾟｰｼﾞへ",
"TP軸･TL軸の動作の為､干渉や挟み込みが無い事を確認する",
"連結位置へ上げないと入力できない",
"押さないと次へ移れません"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": []
} | {
"QualityItem": "手順確認",
"ToolManageNo": "FM-5247",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通りの手順である事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾚｲ完成品ﾁｪｯｶｰ",
"Size": "",
"ToolOther": "FM-5247",
"WorkName": "TL軸ﾏｲﾅｽﾘﾐｯﾄの調整-2(ｵﾌｾｯﾄ値入力-2)",
"WorkItems": [
"1. 入力を確認したら TLｵﾌｾｯﾄ書込みを押す",
"2. 入力がされているか確認",
"3. 数値が出ればOK",
"4. 原点復帰を行う",
"5. 原点復帰完了を押す"
],
"WorkPoints": [
"押さないと次へ移れません"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": []
} | {
"QualityItem": "手順確認",
"ToolManageNo": "FM-5247",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通りの手順である事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾚｲ完成品ﾁｪｯｶｰ",
"Size": "",
"ToolOther": "FM-5247",
"WorkName": "TL軸ﾏｲﾅｽﾘﾐｯﾄの調整-3(-側ORｾﾝｻｰ調整)",
"WorkItems": [
"3. TL軸ﾏﾆｭｱﾙ動作で-0.1㎜追加し-1.6㎜迄下げる"
],
"WorkPoints": [
"1.6㎜以上有る事",
"原点位置 LED点灯",
"-1.5㎜ LED点灯",
"1.6㎜以上有る事",
"原点位置 LED点灯",
"-1.5㎜ LED点灯",
"-1.6㎜ LED消灯",
"-1.5㎜入力後LED点灯を確認したら-1.6㎜を入力消灯することを確認する",
"M4",
"ﾏｲﾅｽ側ｾﾝｻｰ"
],
"Tolks": [
"締付ﾄﾙｸ 3.2N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"-1.5㎜"
]
} | {
"QualityItem": "手順確認",
"ToolManageNo": "FM-5247",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通りの手順である事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "3㎜",
"ToolOther": "3.2N･m",
"WorkName": "TL軸ﾏｲﾅｽﾘﾐｯﾄの調整-3(-側ORｾﾝｻｰ調整)",
"WorkItems": [
"3. TL軸ﾏﾆｭｱﾙ動作で-0.1㎜追加し-1.6㎜迄下げる"
],
"WorkPoints": [
"-1.6㎜ LED消灯",
"-1.5㎜入力後LED点灯を確認したら-1.6㎜を入力消灯することを確認する",
"M4",
"ﾏｲﾅｽ側ｾﾝｻｰ"
],
"Tolks": [
"締付ﾄﾙｸ 3.2N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"-1.5㎜"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "3.2N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"ToolOther": "",
"WorkName": "TL軸ﾏｲﾅｽﾘﾐｯﾄの調整-3(-側ORｾﾝｻｰ調整)",
"WorkItems": [
"1. ﾏｲﾅｽﾘﾐｯﾄｾﾝｻｰ側のﾄﾞｸﾞ位置の確認",
"2. TL軸ﾏﾆｭｱﾙ動作で-1.5mm入力する",
"3. TL軸ﾏﾆｭｱﾙ動作で-0.1㎜追加し-1.6㎜迄下げる"
],
"WorkPoints": [
"1.6㎜以上有る事",
"原点よりｾﾝｻｰ光軸まで1.6㎜以上有る事を確認余裕が無い場合ｾﾝｻｰを動かし余裕を作る事",
"原点位置 LED点灯",
"-1.5㎜ LED点灯",
"-1.6㎜ LED消灯",
"-1.5㎜入力後LED点灯を確認､点灯しない場合はｾﾝｻｰを調整し点灯させる",
"-1.5㎜入力後LED点灯を確認したら-1.6㎜を入力消灯することを確認する",
"M4",
"ﾏｲﾅｽ側ｾﾝｻｰ"
],
"Tolks": [
"締付ﾄﾙｸ 3.2N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"-1.5㎜"
]
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "1.6㎜以上ある事",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾚｲ完成品ﾁｪｯｶｰ",
"Size": "",
"ToolOther": "FM-5247",
"WorkName": "TL軸ﾏｲﾅｽﾘﾐｯﾄの調整-3(-側ORｾﾝｻｰ調整)",
"WorkItems": [
"3. TL軸ﾏﾆｭｱﾙ動作で-0.1㎜追加し-1.6㎜迄下げる"
],
"WorkPoints": [
"1.6㎜以上有る事",
"原点位置 LED点灯",
"-1.5㎜ LED点灯",
"1.6㎜以上有る事",
"原点位置 LED点灯",
"-1.5㎜ LED点灯",
"-1.6㎜ LED消灯",
"-1.5㎜入力後LED点灯を確認したら-1.6㎜を入力消灯することを確認する",
"M4",
"ﾏｲﾅｽ側ｾﾝｻｰ"
],
"Tolks": [
"締付ﾄﾙｸ 3.2N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"-1.5㎜"
]
} | {
"QualityItem": "ｽﾄﾛｰｸ位置確認",
"ToolManageNo": "FM-5247",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "-1.5㎜でLED点灯-1.6㎜でLED消灯",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾚｲ完成品ﾁｪｯｶｰ",
"Size": "",
"ToolOther": "FM-5247",
"WorkName": "TL軸ﾏｲﾅｽﾘﾐｯﾄの調整-4(ｵﾌｾｯﾄ値0戻し-1)",
"WorkItems": [
"1. TL軸の原点復帰を行う",
"2. 原点復帰完了を押す",
"3. 連結位置へTL軸を上げる",
"4. 連結位置でTL軸原点ｵﾌｾｯﾄﾃｨｰﾁを押す",
"5. 入力を確認したら TLｵﾌｾｯﾄ書込みを押す"
],
"WorkPoints": [
"TP軸･TL軸の動作の為､干渉や挟み込みが無い事を確認する",
"\"OK\"を押すとTL軸が上昇するので手を挟まない様に注意",
"0.5㎜づつ入力される",
"次ﾍﾟｰｼﾞへ",
"押さないと次へ移れません"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": []
} | {
"QualityItem": "手順確認",
"ToolManageNo": "FM-5247",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通りの手順である事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾚｲ完成品ﾁｪｯｶｰ",
"Size": "",
"ToolOther": "FM-5247",
"WorkName": "TL軸ﾏｲﾅｽﾘﾐｯﾄの調整-5(ｵﾌｾｯﾄ値0戻し-2)",
"WorkItems": [
"1. ｵﾌｾｯﾄ値の確認",
"4. 原点復帰後ｵﾌｾｯﾄ値の確認",
"2. TL軸の原点復帰を行う",
"3. 原点復帰完了を押す",
"5. TL軸のｵﾌｾｯﾄ値が\"0\"であれば完了"
],
"WorkPoints": [
"TP軸･TL軸ともに\"0\"となっている事",
"TP軸･TL軸の動作の為､干渉や挟み込みが無い事を確認する",
"押さないと次へ移れません",
"TP軸･TL軸ともに\"0\"となっている事",
"ｵﾌｾｯﾄ値｢0｣"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"検査表①:TL軸ｽﾄﾛｰｸ位置調整"
]
} | {
"QualityItem": "手順確認",
"ToolManageNo": "FM-5247",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通りの手順である事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾚｲ完成品ﾁｪｯｶｰ",
"Size": "",
"ToolOther": "FM-5247",
"WorkName": "TL軸ﾏｲﾅｽﾘﾐｯﾄの調整-5(ｵﾌｾｯﾄ値0戻し-2)",
"WorkItems": [
"1. ｵﾌｾｯﾄ値の確認",
"4. 原点復帰後ｵﾌｾｯﾄ値の確認",
"2. TL軸の原点復帰を行う",
"3. 原点復帰完了を押す",
"5. TL軸のｵﾌｾｯﾄ値が\"0\"であれば完了"
],
"WorkPoints": [
"TP軸･TL軸ともに\"0\"となっている事",
"TP軸･TL軸の動作の為､干渉や挟み込みが無い事を確認する",
"押さないと次へ移れません",
"TP軸･TL軸ともに\"0\"となっている事",
"ｵﾌｾｯﾄ値｢0｣"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"検査表①:TL軸ｽﾄﾛｰｸ位置調整",
"WEAV-G002-C36"
]
} | {
"QualityItem": "設定確認",
"ToolManageNo": "FM-5247",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "ｵﾌｾｯﾄ値:0㎜",
"Method": "目視",
"RecordMethod": "WEAV-G002-C36",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾚｲ完成品ﾁｪｯｶｰ",
"Size": "",
"ToolOther": "FM-5247",
"WorkName": "ﾌｧｰﾑﾊﾞｰｼﾞｮﾝ確認とｴｰｼﾞﾝｸﾞの実施",
"WorkItems": [
"1. ﾁｪｯｶｰ画面に表示されてあるﾌｧｰﾑﾊﾞｰｼﾞｮﾝを確認する",
"2. ｴｰｼﾞﾝｸﾞの実施"
],
"WorkPoints": [
"ﾌｧｰﾑﾊﾞｰｼﾞｮﾝを記録する",
"ﾁｪｯｶｰ画面で90ｻｲｸﾙを入力し12hの連続運転を行うｴﾗｰ停止無き事",
"TL軸･TP軸の微調整を行う前にﾍﾞﾙﾄの初期伸びを取る為にここでｴｰｼﾞﾝｸﾞを行う事を推奨する"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"検査表①:ﾌｧｰﾑﾊﾞｰｼﾞｮﾝの確認",
"高速になっている事を確認",
"検査表①:ｴｰｼﾞﾝｸﾞ"
]
} | {
"QualityItem": "手順確認",
"ToolManageNo": "FM-5247",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通りの手順である事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾚｲ完成品ﾁｪｯｶｰ",
"Size": "",
"ToolOther": "FM-5247",
"WorkName": "ﾌｧｰﾑﾊﾞｰｼﾞｮﾝ確認とｴｰｼﾞﾝｸﾞの実施",
"WorkItems": [
"1. ﾁｪｯｶｰ画面に表示されてあるﾌｧｰﾑﾊﾞｰｼﾞｮﾝを確認する",
"2. ｴｰｼﾞﾝｸﾞの実施"
],
"WorkPoints": [
"ﾌｧｰﾑﾊﾞｰｼﾞｮﾝを記録する",
"ﾁｪｯｶｰ画面で90ｻｲｸﾙを入力し12hの連続運転を行うｴﾗｰ停止無き事",
"TL軸･TP軸の微調整を行う前にﾍﾞﾙﾄの初期伸びを取る為にここでｴｰｼﾞﾝｸﾞを行う事を推奨する"
],
"Tolks": [],
"InspectionNo": "WEAV-G002-C36",
"InspectionItems": [
"検査表①:ﾌｧｰﾑﾊﾞｰｼﾞｮﾝの確認"
],
"WorkTypes": [],
"Words": [
"高速になっている事を確認",
"検査表①:ｴｰｼﾞﾝｸﾞ",
"WEAV-G002-C36"
]
} | {
"QualityItem": "表示確認",
"ToolManageNo": "FM-5247",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "ﾌｧｰﾑﾊﾞｰｼﾞｮﾝを確認し記録",
"Method": "目視",
"RecordMethod": "WEAV-G002-C36",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾚｲ完成品ﾁｪｯｶｰ",
"Size": "",
"ToolOther": "FM-5247",
"WorkName": "ﾌｧｰﾑﾊﾞｰｼﾞｮﾝ確認とｴｰｼﾞﾝｸﾞの実施",
"WorkItems": [
"1. ﾁｪｯｶｰ画面に表示されてあるﾌｧｰﾑﾊﾞｰｼﾞｮﾝを確認する",
"2. ｴｰｼﾞﾝｸﾞの実施"
],
"WorkPoints": [
"ﾌｧｰﾑﾊﾞｰｼﾞｮﾝを記録する",
"ﾁｪｯｶｰ画面で90ｻｲｸﾙを入力し12hの連続運転を行うｴﾗｰ停止無き事",
"TL軸･TP軸の微調整を行う前にﾍﾞﾙﾄの初期伸びを取る為にここでｴｰｼﾞﾝｸﾞを行う事を推奨する"
],
"Tolks": [],
"InspectionNo": "WEAV-G002-C36",
"InspectionItems": [
"検査表①:ｴｰｼﾞﾝｸﾞ"
],
"WorkTypes": [],
"Words": [
"検査表①:ﾌｧｰﾑﾊﾞｰｼﾞｮﾝの確認",
"高速になっている事を確認",
"WEAV-G002-C36"
]
} | {
"QualityItem": "ｴｰｼﾞﾝｸﾞ動作実施",
"ToolManageNo": "FM-5247",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "ｴﾗｰ無きこと",
"Method": "目視",
"RecordMethod": "WEAV-G002-C36",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾍﾞﾙﾄ張力計",
"Size": "",
"ToolOther": "U-507",
"WorkName": "各ﾍﾞﾙﾄﾃﾝｼｮﾝの確認-1",
"WorkItems": [
"1. ①のTL軸のﾍﾞﾙﾄ張力を調整",
"2. TP軸のﾍﾞﾙﾄ張力を調整"
],
"WorkPoints": [
"測定箇所",
"ﾍﾞﾙﾄﾃﾝｼｮﾝ規格値:74N±10%質量(M):2.5g/mm幅 (W):15mmｽﾊﾟﾝ(S):88mm",
"ﾍﾞﾙﾄの測定箇所付近を弾いて測定する",
"必ずｴｰｼﾞﾝｸﾞ(12時間)終了後に行う事",
"ﾍﾞﾙﾄﾃﾝｼｮﾝ規格値:74N±10%質量(M):2.5g/mm幅 (W):15mmｽﾊﾟﾝ(S):245mm",
"TP軸を吸着側いっぱいに移動",
"測定箇所"
],
"Tolks": [
"締付ﾄﾙｸ 6.0N･m",
"締付ﾄﾙｸ 6.0N･m"
],
"InspectionNo": "WEAV-G002-C36",
"InspectionItems": [
"検査表①:TL軸ﾍﾞﾙﾄﾃﾝｼｮﾝ再調整"
],
"WorkTypes": [],
"Words": [
"検査表①:TP軸ﾍﾞﾙﾄﾃﾝｼｮﾝ再調整",
"WEAV-G002-C36"
]
} | {
"QualityItem": "張力確認",
"ToolManageNo": "-",
"ToolCycle": "1回/年",
"ToolRecord": "校正成績書",
"StdVal": "74N･m±10%",
"Method": "ﾍﾞﾙﾄ張力計",
"RecordMethod": "WEAV-G002-C36",
"Other": "TL軸",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "TL軸ﾍﾞﾙﾄﾃﾝｼｮﾝ調整ｼﾞｸﾞ",
"Size": "",
"ToolOther": "FM-5052",
"WorkName": "各ﾍﾞﾙﾄﾃﾝｼｮﾝの確認-1",
"WorkItems": [
"1. ①のTL軸のﾍﾞﾙﾄ張力を調整"
],
"WorkPoints": [
"測定箇所",
"ﾍﾞﾙﾄﾃﾝｼｮﾝ規格値:74N±10%質量(M):2.5g/mm幅 (W):15mmｽﾊﾟﾝ(S):88mm",
"ﾍﾞﾙﾄの測定箇所付近を弾いて測定する",
"必ずｴｰｼﾞﾝｸﾞ(12時間)終了後に行う事"
],
"Tolks": [
"締付ﾄﾙｸ 6.0N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"検査表①:TL軸ﾍﾞﾙﾄﾃﾝｼｮﾝ再調整"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-5052",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "4㎜",
"ToolOther": "6.0N･m",
"WorkName": "各ﾍﾞﾙﾄﾃﾝｼｮﾝの確認-1",
"WorkItems": [
"1. ①のTL軸のﾍﾞﾙﾄ張力を調整",
"2. TP軸のﾍﾞﾙﾄ張力を調整"
],
"WorkPoints": [
"測定箇所",
"ﾍﾞﾙﾄﾃﾝｼｮﾝ規格値:74N±10%質量(M):2.5g/mm幅 (W):15mmｽﾊﾟﾝ(S):88mm",
"ﾍﾞﾙﾄの測定箇所付近を弾いて測定する",
"必ずｴｰｼﾞﾝｸﾞ(12時間)終了後に行う事",
"ﾍﾞﾙﾄﾃﾝｼｮﾝ規格値:74N±10%質量(M):2.5g/mm幅 (W):15mmｽﾊﾟﾝ(S):245mm",
"TP軸を吸着側いっぱいに移動",
"測定箇所"
],
"Tolks": [
"締付ﾄﾙｸ 6.0N･m",
"締付ﾄﾙｸ 6.0N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"検査表①:TL軸ﾍﾞﾙﾄﾃﾝｼｮﾝ再調整",
"検査表①:TP軸ﾍﾞﾙﾄﾃﾝｼｮﾝ再調整"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "6.0N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "TP軸ﾍﾞﾙﾄﾃﾝｼｮﾝ調整ｼﾞｸﾞ",
"Size": "",
"ToolOther": "FM-5056",
"WorkName": "各ﾍﾞﾙﾄﾃﾝｼｮﾝの確認-1",
"WorkItems": [
"2. TP軸のﾍﾞﾙﾄ張力を調整"
],
"WorkPoints": [
"ﾍﾞﾙﾄﾃﾝｼｮﾝ規格値:74N±10%質量(M):2.5g/mm幅 (W):15mmｽﾊﾟﾝ(S):245mm",
"TP軸を吸着側いっぱいに移動",
"測定箇所"
],
"Tolks": [
"締付ﾄﾙｸ 6.0N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"検査表①:TP軸ﾍﾞﾙﾄﾃﾝｼｮﾝ再調整"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-5056",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾍﾞﾙﾄ張力計",
"Size": "",
"ToolOther": "FM-5056",
"WorkName": "各ﾍﾞﾙﾄﾃﾝｼｮﾝの確認-1",
"WorkItems": [
"1. ①のTL軸のﾍﾞﾙﾄ張力を調整",
"2. TP軸のﾍﾞﾙﾄ張力を調整"
],
"WorkPoints": [
"測定箇所",
"ﾍﾞﾙﾄﾃﾝｼｮﾝ規格値:74N±10%質量(M):2.5g/mm幅 (W):15mmｽﾊﾟﾝ(S):88mm",
"ﾍﾞﾙﾄの測定箇所付近を弾いて測定する",
"必ずｴｰｼﾞﾝｸﾞ(12時間)終了後に行う事",
"ﾍﾞﾙﾄﾃﾝｼｮﾝ規格値:74N±10%質量(M):2.5g/mm幅 (W):15mmｽﾊﾟﾝ(S):245mm",
"TP軸を吸着側いっぱいに移動",
"測定箇所"
],
"Tolks": [
"締付ﾄﾙｸ 6.0N･m",
"締付ﾄﾙｸ 6.0N･m"
],
"InspectionNo": "WEAV-G002-C36",
"InspectionItems": [
"検査表①:TP軸ﾍﾞﾙﾄﾃﾝｼｮﾝ再調整"
],
"WorkTypes": [],
"Words": [
"検査表①:TL軸ﾍﾞﾙﾄﾃﾝｼｮﾝ再調整",
"WEAV-G002-C36"
]
} | {
"QualityItem": "張力確認",
"ToolManageNo": "FM-5056",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "74N･m±10%",
"Method": "目視",
"RecordMethod": "WEAV-G002-C36",
"Other": "TP軸",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾍﾞﾙﾄ張力計",
"Size": "",
"ToolOther": "U-507",
"WorkName": "各ﾍﾞﾙﾄﾃﾝｼｮﾝの確認-2",
"WorkItems": [
"1. TP軸のﾓｰﾀｰ側ﾍﾞﾙﾄ張力を調整",
"2. ﾀｲﾐﾝｸﾞﾌﾟｰﾘｰとﾀｲﾐﾝｸﾞﾍﾞﾙﾄとの合わせﾏｰｸを付ける"
],
"WorkPoints": [
"ﾍﾞﾙﾄﾃﾝｼｮﾝ規格値:44N±10%質量(M):2.5g/mm幅 (W):9mmｽﾊﾟﾝ(S):68mm",
"ﾍﾞﾙﾄの測定箇所付近を弾いて測定する",
"･ﾓｰﾀｰ側:大きい側のﾌﾟｰﾘｰ固定ﾎﾞﾙﾄの中間の 直上に合わせﾏｰｸを引く･駆動側:対向側のﾌﾟｰﾘｰの下側に合わせﾏｰｸを引く･ﾏｰｸを引く場合は駆動させ無い事･両方のﾏｰｸ位置が合っている事･TP軸原点位置にて引く事",
"必ずｴｰｼﾞﾝｸﾞ(12時間)終了後に行う事"
],
"Tolks": [
"締付ﾄﾙｸ 3.6N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"検査表①:TP軸合ﾏｰｸ追加",
"検査表①:TP軸ﾍﾞﾙﾄﾃﾝｼｮﾝ再調整",
"WEAV-G002-C36"
]
} | {
"QualityItem": "張力確認",
"ToolManageNo": "-",
"ToolCycle": "1回/年",
"ToolRecord": "校正成績書",
"StdVal": "44N･m±10%",
"Method": "ﾍﾞﾙﾄ張力計",
"RecordMethod": "WEAV-G002-C36",
"Other": "TP軸",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "TP軸ﾍﾞﾙﾄﾃﾝｼｮﾝ調整ｼﾞｸﾞ",
"Size": "",
"ToolOther": "FM-5056",
"WorkName": "各ﾍﾞﾙﾄﾃﾝｼｮﾝの確認-2",
"WorkItems": [
"1. TP軸のﾓｰﾀｰ側ﾍﾞﾙﾄ張力を調整",
"2. ﾀｲﾐﾝｸﾞﾌﾟｰﾘｰとﾀｲﾐﾝｸﾞﾍﾞﾙﾄとの合わせﾏｰｸを付ける"
],
"WorkPoints": [
"ﾍﾞﾙﾄﾃﾝｼｮﾝ規格値:44N±10%質量(M):2.5g/mm幅 (W):9mmｽﾊﾟﾝ(S):68mm",
"ﾍﾞﾙﾄの測定箇所付近を弾いて測定する",
"･ﾓｰﾀｰ側:大きい側のﾌﾟｰﾘｰ固定ﾎﾞﾙﾄの中間の 直上に合わせﾏｰｸを引く･駆動側:対向側のﾌﾟｰﾘｰの下側に合わせﾏｰｸを引く･ﾏｰｸを引く場合は駆動させ無い事･両方のﾏｰｸ位置が合っている事･TP軸原点位置にて引く事",
"必ずｴｰｼﾞﾝｸﾞ(12時間)終了後に行う事"
],
"Tolks": [
"締付ﾄﾙｸ 3.6N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"検査表①:TP軸合ﾏｰｸ追加",
"検査表①:TP軸ﾍﾞﾙﾄﾃﾝｼｮﾝ再調整"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-5056",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "4㎜",
"ToolOther": "3.6N･m",
"WorkName": "各ﾍﾞﾙﾄﾃﾝｼｮﾝの確認-2",
"WorkItems": [
"1. TP軸のﾓｰﾀｰ側ﾍﾞﾙﾄ張力を調整",
"2. ﾀｲﾐﾝｸﾞﾌﾟｰﾘｰとﾀｲﾐﾝｸﾞﾍﾞﾙﾄとの合わせﾏｰｸを付ける"
],
"WorkPoints": [
"ﾍﾞﾙﾄﾃﾝｼｮﾝ規格値:44N±10%質量(M):2.5g/mm幅 (W):9mmｽﾊﾟﾝ(S):68mm",
"ﾍﾞﾙﾄの測定箇所付近を弾いて測定する",
"･ﾓｰﾀｰ側:大きい側のﾌﾟｰﾘｰ固定ﾎﾞﾙﾄの中間の 直上に合わせﾏｰｸを引く･駆動側:対向側のﾌﾟｰﾘｰの下側に合わせﾏｰｸを引く･ﾏｰｸを引く場合は駆動させ無い事･両方のﾏｰｸ位置が合っている事･TP軸原点位置にて引く事",
"必ずｴｰｼﾞﾝｸﾞ(12時間)終了後に行う事"
],
"Tolks": [
"締付ﾄﾙｸ 3.6N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"検査表①:TP軸合ﾏｰｸ追加",
"検査表①:TP軸ﾍﾞﾙﾄﾃﾝｼｮﾝ再調整"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "3.6N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "各ﾍﾞﾙﾄﾃﾝｼｮﾝの確認-2",
"WorkItems": [
"1. TP軸のﾓｰﾀｰ側ﾍﾞﾙﾄ張力を調整",
"2. ﾀｲﾐﾝｸﾞﾌﾟｰﾘｰとﾀｲﾐﾝｸﾞﾍﾞﾙﾄとの合わせﾏｰｸを付ける"
],
"WorkPoints": [
"ﾍﾞﾙﾄﾃﾝｼｮﾝ規格値:44N±10%質量(M):2.5g/mm幅 (W):9mmｽﾊﾟﾝ(S):68mm",
"ﾍﾞﾙﾄの測定箇所付近を弾いて測定する",
"･ﾓｰﾀｰ側:大きい側のﾌﾟｰﾘｰ固定ﾎﾞﾙﾄの中間の 直上に合わせﾏｰｸを引く･駆動側:対向側のﾌﾟｰﾘｰの下側に合わせﾏｰｸを引く･ﾏｰｸを引く場合は駆動させ無い事･両方のﾏｰｸ位置が合っている事･TP軸原点位置にて引く事",
"必ずｴｰｼﾞﾝｸﾞ(12時間)終了後に行う事"
],
"Tolks": [
"締付ﾄﾙｸ 3.6N･m"
],
"InspectionNo": "WEAV-G002-C036",
"InspectionItems": [
"検査表①:TP軸合ﾏｰｸ追加"
],
"WorkTypes": [],
"Words": [
"検査表①:TP軸ﾍﾞﾙﾄﾃﾝｼｮﾝ再調整",
"WEAV-G002-C036"
]
} | {
"QualityItem": "ﾏｰｸ確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "合ﾏｰｸ2ヶ所",
"Method": "目視",
"RecordMethod": "WEAV-G002-C036",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾚｲ完成品ﾁｪｯｶｰ",
"Size": "",
"ToolOther": "FM-5247",
"WorkName": "TL軸とﾊﾟﾚｯﾄｽﾄｯｸ部の高さ調整-4",
"WorkItems": [
"1. ﾊﾟﾜｰONを行う",
"2. ｵﾌｾｯﾄ値の確認",
"3. TL軸原点復帰を行う",
"3. TL軸原点復帰を行う",
"4. 引き出部を原点位置から下段23ｽﾛｯﾄ高さへ移動する"
],
"WorkPoints": [
"引き出部のﾚﾊﾞｰを原点付近へ動かす",
"FM-2848治具が取付いて無い事を確認｡ﾚﾊﾞｰが回転して危険です",
"ｽｲｯﾁONから動き出しまでﾀｲﾑﾗｸﾞが有るので注意のこと",
"TP軸･TL軸ともに\"0\"となっている事",
"FM-2848治具が取付いて無い事を確認｡ﾚﾊﾞｰが回転して危険です",
"ｽｲｯﾁONから動き出しまでﾀｲﾑﾗｸﾞが有るので注意のこと",
"TP軸･TL軸ともに\"0\"となっている事"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": []
} | {
"QualityItem": "手順確認",
"ToolManageNo": "FM-5247",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通りの手順である事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾚｲ完成品ﾁｪｯｶｰ",
"Size": "",
"ToolOther": "FM-5247",
"WorkName": "TL軸とﾊﾟﾚｯﾄｽﾄｯｸ部の高さ調整-5",
"WorkItems": [],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"A-A断面",
"測定位置(上面から見た図)",
"下23段目",
"引き出部",
"A1A0A2",
"引き出部搬送面",
"下23段目",
"治具ﾊﾟﾚｯﾄ",
"治具ﾊﾟﾚｯﾄ",
"※1"
]
} | {
"QualityItem": "手順確認",
"ToolManageNo": "FM-5247",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通りの手順である事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null | |
{
"ToolName": "治具ﾊﾟﾚｯﾄ",
"Size": "",
"ToolOther": "FM-5946",
"WorkName": "TL軸とﾊﾟﾚｯﾄｽﾄｯｸ部の高さ調整-5",
"WorkItems": [
"1. 治具をｾｯﾄする",
"2. ﾊﾟﾚｯﾄｽﾄｯｸ部の治具の中央(A0)の高さに引き出部を基準に測定しながら確認"
],
"WorkPoints": [
"下段23段目と引き出軸",
"この時の高さの差を把握する事",
"測定ﾎﾟｲﾝﾄ A0･A1･A2 を測定する"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [],
"Words": [
"A 2",
"A 0",
"A 1",
"A-A断面",
"測定位置(上面から見た図)",
"下23段目",
"引き出部",
"A1A0A2",
"引き出部搬送面",
"下23段目",
"治具ﾊﾟﾚｯﾄ",
"治具ﾊﾟﾚｯﾄ",
"※1"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-5946",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"-"
]
} | information_extraction | 0 | null |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.