input stringclasses 1
value | instruction stringlengths 223 3.4k | output stringlengths 206 380 | category stringclasses 1
value | index stringclasses 1
value | fileName null |
|---|---|---|---|---|---|
{
"ToolName": "交換台車駆動部置台30(NPM-GW)",
"Size": "",
"ToolOther": "FM-6432",
"WorkName": "駆動部組立6",
"WorkItems": [
"1. ①の勘合を治具ﾋﾟﾝ(Φ3,97)で確認する",
"2. 各隙間を確認する"
],
"WorkPoints": [
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": []
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-6432",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付けできている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "2.5㎜",
"ToolOther": "3.1N･m",
"WorkName": "駆動部組立7",
"WorkItems": [
"1. ①に②④を入れ③を挿入する",
"2. 1完成品にCAM-FOLLOWER をSCREW で取付ける"
],
"WorkPoints": [
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています",
"矢印方向に押し当てて取付けの事",
"Dｶｯﾄ面が上面で挿入の事",
"締付け",
"締付け"
],
"Tolks": [
"締付ﾄﾙｸ 3.1N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "3.1N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "交換台車駆動部置台30(NPM-GW)",
"Size": "",
"ToolOther": "FM-6432",
"WorkName": "駆動部組立7",
"WorkItems": [
"1. ①に②④を入れ③を挿入する",
"2. 1完成品にCAM-FOLLOWER をSCREW で取付ける"
],
"WorkPoints": [
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています",
"矢印方向に押し当てて取付けの事",
"Dｶｯﾄ面が上面で挿入の事",
"締付け",
"締付け"
],
"Tolks": [
"締付ﾄﾙｸ 3.1N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": []
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-6432",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付けできている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "ｸﾞﾘｰｽLCG100",
"WorkName": "ｼﾘﾝﾀﾞｰ取付け",
"WorkItems": [
"2. ①にSHAFT を取付け､②COLLAR COLLAR を挿入しCﾘﾝｸﾞで固定する",
"3. 2完成品にBOLT を取付ける"
],
"WorkPoints": [
"ｸﾞﾘｰｽ塗布位置"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": [
"ｸﾞﾘｰｽ塗布 米粒:1",
"ｸﾞﾘｰｽ塗布 小豆:1",
"◆作業者安全作業"
]
} | {
"QualityItem": "塗布量",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示箇所に塗布米粒:各2、米粒:1小豆粒:1",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "6㎜",
"ToolOther": "26.5N･m",
"WorkName": "ｼﾘﾝﾀﾞｰ取付け",
"WorkItems": [
"2. ①にSHAFT を取付け､②COLLAR COLLAR を挿入しCﾘﾝｸﾞで固定する",
"3. 2完成品にBOLT を取付ける"
],
"WorkPoints": [
"ｸﾞﾘｰｽ塗布位置"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": [
"ｸﾞﾘｰｽ塗布 米粒:1",
"ｸﾞﾘｰｽ塗布 小豆:1",
"◆作業者安全作業"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "26.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "交換台車駆動部置台30(NPM-GW)",
"Size": "",
"ToolOther": "FM-6432",
"WorkName": "ｼﾘﾝﾀﾞｰ取付け",
"WorkItems": [
"2. ①にSHAFT を取付け､②COLLAR COLLAR を挿入しCﾘﾝｸﾞで固定する",
"3. 2完成品にBOLT を取付ける",
"◆1. SHAFT COLLAR COLLAR BOLT にｸﾞﾘｰｽを塗布する"
],
"WorkPoints": [
"表裏に塗布",
"ｸﾞﾘｰｽ塗布位置",
"付属Cﾘﾝｸﾞ",
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています"
],
"Tolks": [
"締付ﾄﾙｸ 26.5N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": [
"ｸﾞﾘｰｽ塗布 米粒:各2",
"ｸﾞﾘｰｽ塗布 米粒:1",
"ｸﾞﾘｰｽ塗布 小豆:1"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-6432",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付けできている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "ｸﾞﾘｰｽ",
"WorkName": "ｽﾌﾟﾘﾝｸﾞ取付け",
"WorkItems": [
"1. TUBE にPOST を挿入する",
"3. 2完成品をｽﾌﾟﾘﾝｸﾞをかけ､①にBOLT で取付ける",
"◆2. 1完成品にｸﾞﾘｰｽを塗布する"
],
"WorkPoints": [
"A矢視",
"B矢視",
"Hｶｯﾄ面を下図の様に取付ける",
"ｽﾌﾟﾘﾝｸﾞをﾁｭｰﾌﾞに当付ける",
"ｸﾞﾘｰｽ塗布位置",
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています"
],
"Tolks": [
"締付ﾄﾙｸ 243cN･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": [
"ｸﾞﾘｰｽ塗布 小豆:1"
]
} | {
"QualityItem": "塗布量",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示箇所に塗布小豆粒:1",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "2.5㎜",
"ToolOther": "243cN･m",
"WorkName": "ｽﾌﾟﾘﾝｸﾞ取付け",
"WorkItems": [
"1. TUBE にPOST を挿入する",
"3. 2完成品をｽﾌﾟﾘﾝｸﾞをかけ､①にBOLT で取付ける"
],
"WorkPoints": [
"A矢視"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": [
"◆作業者安全作業"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "243cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "No.2",
"ToolOther": "55cN･m",
"WorkName": "ｽｲｯﾁ配線接続",
"WorkItems": [
"3. JOINT を分け雄ねじ側を2完成品に取付",
"■1. SWITCH の型式確認をし､ﾛｯﾄNo.を記録する",
"2. SWITCH のｽｲｯﾁﾚﾊﾞｰを組替える"
],
"WorkPoints": [
"ﾚﾊﾞｰは180°反転させ取付",
"先端部を取外し本体を反時計回りに90度向き変更し取付"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業",
"◆作業者安全作業"
],
"Words": [
"■安全作業"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "55cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程",
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "No.2",
"ToolOther": "170cN･m",
"WorkName": "ｽｲｯﾁ配線接続",
"WorkItems": [
"3. JOINT を分け雄ねじ側を2完成品に取付",
"■1. SWITCH の型式確認をし､ﾛｯﾄNo.を記録する",
"2. SWITCH のｽｲｯﾁﾚﾊﾞｰを組替える"
],
"WorkPoints": [
"ﾚﾊﾞｰは180°反転させ取付",
"先端部を取外し本体を反時計回りに90度向き変更し取付"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業",
"◆作業者安全作業"
],
"Words": [
"■安全作業"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "170cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程",
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "No.2",
"ToolOther": "70cN･m",
"WorkName": "ｽｲｯﾁ配線接続",
"WorkItems": [
"■5. SWITCH の蓋を開け､丸端子を挿入し指定ｶ所に接続する"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 170cN･m",
"締付ﾄﾙｸ 2.0N･m",
"締付ﾄﾙｸ 70cN･m"
],
"InspectionNo": "WETE-G002-C18",
"InspectionItems": [
"検査表SWITCH :ﾘﾐｯﾄｽｲｯﾁのﾈｼﾞ締めﾄﾙｸ確認"
],
"WorkTypes": [
"■安全作業"
],
"Words": [
"■安全作業"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "70cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "No.2",
"ToolOther": "60cN･m",
"WorkName": "ｽｲｯﾁ配線接続",
"WorkItems": [
"4. JOINT の雌ねじ側にCABLE の丸端子側の配線を通す",
"6. 蓋及びJOINT を締め付ける"
],
"WorkPoints": [
"絵の向き通りに通す事",
"蓋取付け時配線噛み込み注意"
],
"Tolks": [
"締付ﾄﾙｸ 1.5N･m",
"締付ﾄﾙｸ 60cN･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"■安全作業"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "60cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸｽﾊﾟﾅ",
"Size": "24㎜",
"ToolOther": "2.0N･m",
"WorkName": "ｽｲｯﾁ配線接続",
"WorkItems": [
"■5. SWITCH の蓋を開け､丸端子を挿入し指定ｶ所に接続する"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 170cN･m",
"締付ﾄﾙｸ 2.0N･m",
"締付ﾄﾙｸ 70cN･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"検査表SWITCH :ﾘﾐｯﾄｽｲｯﾁのﾈｼﾞ締めﾄﾙｸ確認",
"■安全作業"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "2.0N･m±10%",
"Method": "ﾄﾙｸｽﾊﾟﾅ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸｽﾊﾟﾅ",
"Size": "24㎜",
"ToolOther": "1.5N･m",
"WorkName": "ｽｲｯﾁ配線接続",
"WorkItems": [
"4. JOINT の雌ねじ側にCABLE の丸端子側の配線を通す",
"6. 蓋及びJOINT を締め付ける"
],
"WorkPoints": [
"絵の向き通りに通す事",
"蓋取付け時配線噛み込み注意"
],
"Tolks": [
"締付ﾄﾙｸ 1.5N･m",
"締付ﾄﾙｸ 60cN･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"■安全作業"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "1.5N･m±10%",
"Method": "ﾄﾙｸｽﾊﾟﾅ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ｽｲｯﾁ配線接続",
"WorkItems": [
"3. JOINT を分け雄ねじ側を2完成品に取付",
"4. JOINT の雌ねじ側にCABLE の丸端子側の配線を通す",
"■5. SWITCH の蓋を開け､丸端子を挿入し指定ｶ所に接続する",
"6. 蓋及びJOINT を締め付ける",
"■1. SWITCH の型式確認をし､ﾛｯﾄNo.を記録する",
"2. SWITCH のｽｲｯﾁﾚﾊﾞｰを組替える"
],
"WorkPoints": [
"ﾚﾊﾞｰは180°反転させ取付",
"ﾚﾊﾞｰ部組替え後必ず動作確認を行うﾚﾊﾞｰを動作させ､引っかかりが無い事",
"絵の向き通りに通す事",
"蓋取付け時配線噛み込み注意",
"先端部を取外し本体を反時計回りに90度向き変更し取付"
],
"Tolks": [
"締付ﾄﾙｸ 170cN･m",
"締付ﾄﾙｸ 55cN･m",
"締付ﾄﾙｸ 2.0N･m",
"締付ﾄﾙｸ 70cN･m",
"締付ﾄﾙｸ 1.5N･m",
"締付ﾄﾙｸ 60cN･m"
],
"InspectionNo": "WETE-G002-C18",
"InspectionItems": [
"検査表SWITCH :ﾘﾐｯﾄｽｲｯﾁの型式確認･ﾛｯﾄNo.記録"
],
"WorkTypes": [
"■安全作業"
],
"Words": [
"検査表SWITCH :ﾘﾐｯﾄｽｲｯﾁのﾈｼﾞ締めﾄﾙｸ確認",
"WETE-G002-C18"
]
} | {
"QualityItem": "型式確認･製造番号記録",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "型式･検査書確認､及びｼﾘｱﾙNo.転記",
"Method": "目視",
"RecordMethod": "WETE-G002-C18",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ｽｲｯﾁ配線接続",
"WorkItems": [
"3. JOINT を分け雄ねじ側を2完成品に取付",
"4. JOINT の雌ねじ側にCABLE の丸端子側の配線を通す",
"■5. SWITCH の蓋を開け､丸端子を挿入し指定ｶ所に接続する",
"6. 蓋及びJOINT を締め付ける",
"■1. SWITCH の型式確認をし､ﾛｯﾄNo.を記録する",
"2. SWITCH のｽｲｯﾁﾚﾊﾞｰを組替える"
],
"WorkPoints": [
"ﾚﾊﾞｰは180°反転させ取付",
"ﾚﾊﾞｰ部組替え後必ず動作確認を行うﾚﾊﾞｰを動作させ､引っかかりが無い事",
"絵の向き通りに通す事",
"蓋取付け時配線噛み込み注意",
"先端部を取外し本体を反時計回りに90度向き変更し取付"
],
"Tolks": [
"締付ﾄﾙｸ 170cN･m",
"締付ﾄﾙｸ 55cN･m",
"締付ﾄﾙｸ 2.0N･m",
"締付ﾄﾙｸ 70cN･m",
"締付ﾄﾙｸ 1.5N･m",
"締付ﾄﾙｸ 60cN･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"検査表SWITCH :ﾘﾐｯﾄｽｲｯﾁのﾈｼﾞ締めﾄﾙｸ確認",
"検査表SWITCH :ﾘﾐｯﾄｽｲｯﾁの型式確認･ﾛｯﾄNo.記録",
"WETE-G002-C18"
]
} | {
"QualityItem": "型式確認･製造番号記録",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "検査表の有無を確認する事",
"Method": "目視",
"RecordMethod": "WETE-G002-C18",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "3㎜",
"ToolOther": "150cN･m",
"WorkName": "ｽｲｯﾁﾌﾞﾗｹｯﾄ取付け1",
"WorkItems": [],
"WorkPoints": [
"ﾌﾞﾗｹｯﾄに対し平行に取付けの事(面位置)",
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています"
],
"Tolks": [
"締付ﾄﾙｸ 150cN･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "150cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "4㎜",
"ToolOther": "5.3N･m",
"WorkName": "ｽｲｯﾁﾌﾞﾗｹｯﾄ取付け2",
"WorkItems": [
"1. ①に治具を取付けてSWの位置を調整する"
],
"WorkPoints": [
"ﾌﾞﾗｹｯﾄに当付け",
"ﾌﾞﾗｹｯﾄに当付け",
"治具ﾎﾞﾙﾄ M6×20",
"治具に当付け固定する",
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています",
"SWのﾛｰﾗｰ部が治具に接している事"
],
"Tolks": [
"締付ﾄﾙｸ 5.3N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"検査表①:ﾘﾐｯﾄｽｲｯﾁの位置出し"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "5.3N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "台車確認SW取付位置決め治具(17連用右)",
"Size": "",
"ToolOther": "FM-6415",
"WorkName": "ｽｲｯﾁﾌﾞﾗｹｯﾄ取付け2",
"WorkItems": [
"1. ①に治具を取付けてSWの位置を調整する"
],
"WorkPoints": [
"ﾌﾞﾗｹｯﾄに当付け",
"ﾌﾞﾗｹｯﾄに当付け",
"治具ﾎﾞﾙﾄ M6×20",
"治具に当付け固定する",
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています",
"SWのﾛｰﾗｰ部が治具に接している事"
],
"Tolks": [
"締付ﾄﾙｸ 5.3N･m"
],
"InspectionNo": "WETE-G002-C18",
"InspectionItems": [
"検査表①:ﾘﾐｯﾄｽｲｯﾁの位置出し"
],
"WorkTypes": [
"■安全作業"
],
"Words": [
"WETE-G002-C18"
]
} | {
"QualityItem": "取付位置確認",
"ToolManageNo": "FM-6415",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "SWのﾛｰﾗｰ部が治具に接している事",
"Method": "目視",
"RecordMethod": "WETE-G002-C18",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "台車確認SW取付位置決め治具(30連用左)",
"Size": "",
"ToolOther": "FM-6419",
"WorkName": "ｽｲｯﾁﾌﾞﾗｹｯﾄ取付け2",
"WorkItems": [
"1. ①に治具を取付けてSWの位置を調整する"
],
"WorkPoints": [
"ﾌﾞﾗｹｯﾄに当付け",
"ﾌﾞﾗｹｯﾄに当付け",
"治具ﾎﾞﾙﾄ M6×20",
"治具に当付け固定する",
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています",
"SWのﾛｰﾗｰ部が治具に接している事"
],
"Tolks": [
"締付ﾄﾙｸ 5.3N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"検査表①:ﾘﾐｯﾄｽｲｯﾁの位置出し",
"WETE-G002-C18"
]
} | {
"QualityItem": "作業確認",
"ToolManageNo": "FM-6419",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り作業出来ている事",
"Method": "目視",
"RecordMethod": "WETE-G002-C18",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "",
"ToolOther": "3.5M",
"WorkName": "配線・配管引き回2",
"WorkItems": [
"1. TUBE をｶｯﾄする",
"2. 1完成品にORIFICE-RING を挿入し①の継ぎ手に接続する"
],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"165㎜"
]
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法165㎜±1㎜",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｺﾝﾍﾞｯｸｽ",
"Size": "",
"ToolOther": "3.5M",
"WorkName": "配線・配管引き回3",
"WorkItems": [
"1. ①に配線を接続し引き回して固定する"
],
"WorkPoints": [
"配線ｺﾈｸﾀ先端までの出代",
"配管(白ﾗｲﾝ有)",
"配管は､固定しない",
"干渉し無い事",
"配線がしっかりと固定され､挟み込み無い事",
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています",
"配管先端までの出代"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"ｲﾝｼｭﾛｯｸ指示",
"･ｹｰﾌﾞﾙ同士を固定",
"･ﾀｲﾏｳﾝﾄに固定 又は板金に固定",
"230㎜",
"検査表①:ｺﾈｸﾀ接続確認",
"検査表①:組立時調整",
"280㎜"
]
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "配線ｺﾈｸﾀ先端出代:230㎜±1㎜",
"Method": "ｺﾝﾍﾞｯｸｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "配線・配管引き回3",
"WorkItems": [
"1. ①に配線を接続し引き回して固定する"
],
"WorkPoints": [
"配線ｺﾈｸﾀ先端までの出代",
"配管(白ﾗｲﾝ有)",
"配管は､固定しない",
"干渉し無い事",
"配線がしっかりと固定され､挟み込み無い事",
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています",
"配管先端までの出代"
],
"Tolks": [],
"InspectionNo": "WETE-G002-C18",
"InspectionItems": [
"検査表①:ｺﾈｸﾀ接続確認"
],
"WorkTypes": [
"■安全作業"
],
"Words": [
"ｲﾝｼｭﾛｯｸ指示",
"･ｹｰﾌﾞﾙ同士を固定",
"･ﾀｲﾏｳﾝﾄに固定 又は板金に固定",
"230㎜",
"検査表①:組立時調整",
"280㎜",
"WETE-G002-C18"
]
} | {
"QualityItem": "ｺﾈｸﾀ接続確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り接続出来ている事",
"Method": "目視",
"RecordMethod": "WETE-G002-C18",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "配線・配管引き回3",
"WorkItems": [
"1. ①に配線を接続し引き回して固定する"
],
"WorkPoints": [
"配線ｺﾈｸﾀ先端までの出代",
"配管(白ﾗｲﾝ有)",
"配管は､固定しない",
"干渉し無い事",
"配線がしっかりと固定され､挟み込み無い事",
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています",
"配管先端までの出代"
],
"Tolks": [],
"InspectionNo": "WETE-G002-C18",
"InspectionItems": [
"検査表①:組立時調整"
],
"WorkTypes": [
"■安全作業"
],
"Words": [
"ｲﾝｼｭﾛｯｸ指示",
"･ｹｰﾌﾞﾙ同士を固定",
"･ﾀｲﾏｳﾝﾄに固定 又は板金に固定",
"230㎜",
"検査表①:ｺﾈｸﾀ接続確認",
"280㎜",
"WETE-G002-C18"
]
} | {
"QualityItem": "配線確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "配線がしっかりと固定され、挟み込み無い事",
"Method": "目視",
"RecordMethod": "WETE-G002-C18",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "4㎜",
"ToolOther": "3.6N･m",
"WorkName": "ﾌﾟﾚｰﾄ取付け",
"WorkItems": [],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "3.6N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "15.5N･m",
"WorkName": "ﾌﾟﾚｰﾄ取付け",
"WorkItems": [],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "15.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "9.8N･m",
"WorkName": "駆動部組立8",
"WorkItems": [
"1. ①に②を挿入する",
"2. 1完成品に③をBOLT で取付ける"
],
"WorkPoints": [
"Dﾋﾟﾝに挿入してから固定する",
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています"
],
"Tolks": [
"締付ﾄﾙｸ 9.8N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "9.8N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｴｱｰ供給治具",
"Size": "",
"ToolOther": "FM-2446",
"WorkName": "ｼﾘﾝﾀﾞｰｽﾄﾛｰｸ確認",
"WorkItems": [
"1. ①を㉖に接続する"
],
"WorkPoints": [
"ﾁｭｰﾌﾞ接続治具側 ﾕﾆｯﾄ側 白色 → 白線有 黒色 → 白線無",
"ｼﾘﾝﾀﾞｰが戻限時0.5㎜が通ら無い事",
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています",
"ｼﾘﾝﾀﾞｰが出限時隙間がある事"
],
"Tolks": [
"締付ﾄﾙｸ 3.5N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"FM-2446",
"ﾕﾆｯﾄ側",
"治具側",
"治具に配管を接続",
"白線無",
"黒色"
]
} | {
"QualityItem": "動作確認",
"ToolManageNo": "FM-2446",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｼﾘﾝﾀﾞｽﾄﾛｰｸ調整治具",
"Size": "5㎜",
"ToolOther": "FM-3061",
"WorkName": "ｼﾘﾝﾀﾞｰｽﾄﾛｰｸ確認",
"WorkItems": [],
"WorkPoints": [
"ｼﾘﾝﾀﾞｰが出限時隙間がある事"
],
"Tolks": [
"締付ﾄﾙｸ 3.5N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"白線無",
"黒色"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-3061",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｼｯｸﾈｽｹﾞｰｼﾞ",
"Size": "0.5㎜",
"ToolOther": "",
"WorkName": "ｼﾘﾝﾀﾞｰｽﾄﾛｰｸ確認",
"WorkItems": [],
"WorkPoints": [
"ｼﾘﾝﾀﾞｰが出限時隙間がある事"
],
"Tolks": [
"締付ﾄﾙｸ 3.5N･m"
],
"InspectionNo": "WETE-G002-C18",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"白線無",
"黒色",
"WETE-G002-C18"
]
} | {
"QualityItem": "隙間確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "0.5㎜ｼｯｸﾈｽｹﾞｰｼﾞが通ら無い事",
"Method": "ｼｯｸﾈｽｹﾞｰｼﾞ",
"RecordMethod": "WETE-G002-C18",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "4㎜",
"ToolOther": "3.5N･m",
"WorkName": "ｼﾘﾝﾀﾞｰｽﾄﾛｰｸ確認",
"WorkItems": [
"2. ｼﾘﾝﾀﾞｰｽﾄﾛｰｸ確認を行う",
"3. 2完成品にGUIDE をSPACER BOLT WASHER WASHER で取付ける"
],
"WorkPoints": [
"ｼﾘﾝﾀﾞを動作させ確認する"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"検査表①:ｼﾘﾝﾀﾞｰｽﾄﾛｰｸｴﾝﾄﾞ位置調整"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "3.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "4㎜",
"ToolOther": "3.6N･m",
"WorkName": "ｶﾞｲﾄﾞ取付け(前側&左側)",
"WorkItems": [
"1. ②に①をBOLT WASHER BOLT WASHER で取付ける"
],
"WorkPoints": [
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています"
],
"Tolks": [
"締付ﾄﾙｸ 3.6N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"47.5㎜"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "3.6N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"ToolOther": "",
"WorkName": "ｶﾞｲﾄﾞ取付け(前側&左側)",
"WorkItems": [
"1. ②に①をBOLT WASHER BOLT WASHER で取付ける"
],
"WorkPoints": [
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています"
],
"Tolks": [
"締付ﾄﾙｸ 3.6N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"47.5㎜"
]
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "寸法の位置に取付けてある事指示寸法47.5㎜±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "4㎜",
"ToolOther": "3.6N･m",
"WorkName": "ｶﾞｲﾄﾞ取付け(後側&左側)",
"WorkItems": [
"1. ②に①をBOLT WASHER で取付ける"
],
"WorkPoints": [
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています"
],
"Tolks": [
"締付ﾄﾙｸ 3.6N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"47.5㎜"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "3.6N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"ToolOther": "",
"WorkName": "ｶﾞｲﾄﾞ取付け(後側&左側)",
"WorkItems": [
"1. ②に①をBOLT WASHER で取付ける"
],
"WorkPoints": [
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています"
],
"Tolks": [
"締付ﾄﾙｸ 3.6N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"47.5㎜"
]
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "寸法の位置に取付けてある事指示寸法47.5㎜±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "2.5㎜",
"ToolOther": "3.0N･m",
"WorkName": "対応ｶﾊﾞｰ取付け",
"WorkItems": [
"1. ①にCOVER をBOLT で取付ける"
],
"WorkPoints": [
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています"
],
"Tolks": [
"締付ﾄﾙｸ 3.0N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "3.0N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "3㎜",
"ToolOther": "194cN･m",
"WorkName": "対応ｶﾊﾞｰ取付け",
"WorkItems": [
"2. 1完成品にCOVER をBOLT WASHER で取付ける"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 194cN･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "194cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "300㎜",
"ToolOther": "",
"WorkName": "ﾗﾍﾞﾙ貼付け",
"WorkItems": [
"1. ①に⑤LABEL を貼付ける"
],
"WorkPoints": [
"LABEL はITF30連/ASF60連交換台車駆動部(右側)に配膳されたものを使用する"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"60㎜",
"60㎜",
"254㎜"
]
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "寸法の位置に貼付けている事指示寸法±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "交換台車駆動部置台30(NPM-GW)",
"Size": "",
"ToolOther": "FM-6432",
"WorkName": "ﾗﾍﾞﾙ貼付け",
"WorkItems": [
"1. ①に⑤LABEL を貼付ける",
"2. 位置決め治具を取り外しｽﾀﾝﾄﾞ治具から下ろす"
],
"WorkPoints": [
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています",
"LABEL はITF30連/ASF60連交換台車駆動部(右側)に配膳されたものを使用する"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"60㎜",
"60㎜",
"254㎜",
"9㎜"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-6432",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取外しができている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "4㎜",
"ToolOther": "12.8N･m",
"WorkName": "ﾎﾟｽﾄ組立",
"WorkItems": [
"1. POST にSCREW を取付ける"
],
"WorkPoints": [
"短い"
],
"Tolks": [
"締付ﾄﾙｸ 12.8N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "12.8N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ｽﾙｰ部材30/60連左側",
"WorkItems": [
"1. 次工程へ払い出す"
],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "部品準備",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示した部品を払い出す事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ｽﾙｰ部材30/60連対応ｶﾊﾞｰ",
"WorkItems": [
"1. 次工程へ払い出す"
],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "部品準備",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示した部品を払い出す事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｱﾙｶﾝｻｽ",
"Size": "",
"ToolOther": "",
"WorkName": "ﾚﾊﾞｰ組立1",
"WorkItems": [],
"WorkPoints": [
"両面ｸﾞﾘｰｽ塗布",
"凹凸を合わせる"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": [
"ｸﾞﾘｰｽ塗布 小豆:1",
"◆作業者安全作業"
]
} | {
"QualityItem": "表面確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "ﾊﾞﾘ等無き事",
"Method": "ｱﾙｶﾝｻｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "ｸﾞﾘｰｽLCG100",
"WorkName": "ﾚﾊﾞｰ組立1",
"WorkItems": [
"3. LEVER にBUSH を圧入",
"1. LEVER に砥石をかけ防錆油を全体に塗布する",
"◆2. BUSH WASHER にｸﾞﾘｰｽを塗布"
],
"WorkPoints": [
"ｸﾞﾘｰｽ塗布位置"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": [
"ｸﾞﾘｰｽ塗布 米粒:2",
"◆作業者安全作業"
]
} | {
"QualityItem": "塗布量",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示箇所に塗布米粒:2小豆粒:1",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "防錆油",
"Size": "",
"ToolOther": "",
"WorkName": "ﾚﾊﾞｰ組立1",
"WorkItems": [
"3. LEVER にBUSH を圧入",
"4. 3完成品にWASHER を挿入",
"1. LEVER に砥石をかけ防錆油を全体に塗布する",
"◆2. BUSH WASHER にｸﾞﾘｰｽを塗布"
],
"WorkPoints": [
"樹脂層側",
"BUSH の継ぎ目位置方向注意",
"LEVER のﾋﾟﾝの部分にWASHER の穴を合わせ樹脂層全体が見えるように取付",
"ｸﾞﾘｰｽ塗布位置",
"両面ｸﾞﾘｰｽ塗布",
"凹凸を合わせる"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": [
"ｸﾞﾘｰｽ塗布 小豆:1",
"ｸﾞﾘｰｽ塗布 米粒:2"
]
} | {
"QualityItem": "塗布確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "作業指示通り塗布してある事",
"Method": "目視",
"RecordMethod": "-",
"Other": "ｴﾊﾞｰｽ",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "台車取付部ﾒﾀﾙ圧入治具",
"Size": "",
"ToolOther": "FM-2144",
"WorkName": "ﾚﾊﾞｰ組立1",
"WorkItems": [
"3. LEVER にBUSH を圧入",
"1. LEVER に砥石をかけ防錆油を全体に塗布する",
"◆2. BUSH WASHER にｸﾞﾘｰｽを塗布"
],
"WorkPoints": [
"ｸﾞﾘｰｽ塗布位置"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": [
"ｸﾞﾘｰｽ塗布 米粒:2",
"◆作業者安全作業"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-2144",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "交換台車駆動部ﾚﾊﾞｰ組立ｼﾞｸﾞ",
"Size": "",
"ToolOther": "FM-6510",
"WorkName": "ﾚﾊﾞｰ組立1",
"WorkItems": [
"3. LEVER にBUSH を圧入",
"1. LEVER に砥石をかけ防錆油を全体に塗布する",
"◆2. BUSH WASHER にｸﾞﾘｰｽを塗布"
],
"WorkPoints": [
"ｸﾞﾘｰｽ塗布位置"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": [
"ｸﾞﾘｰｽ塗布 米粒:2",
"◆作業者安全作業"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-6510",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｱﾙｶﾝｻｽ",
"Size": "",
"ToolOther": "",
"WorkName": "ﾚﾊﾞｰ組立2",
"WorkItems": [
"1. LEVER に砥石をかける"
],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": [
"◆作業者安全作業"
]
} | {
"QualityItem": "表面確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "ﾊﾞﾘ等無き事",
"Method": "ｱﾙｶﾝｻｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "ｸﾞﾘｰｽ",
"WorkName": "ﾚﾊﾞｰ組立2",
"WorkItems": [
"1. LEVER に砥石をかける",
"◆2. BUSH にｸﾞﾘｰｽを塗布する",
"4. 3完成品にBOLT を取付ける",
"3. 1完成品に2完成品を圧入する"
],
"WorkPoints": [
"塗布位置",
"継ぎ目位置"
],
"Tolks": [
"締付ﾄﾙｸ 3.2N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": [
"ｸﾞﾘｰｽ塗布 米粒:2"
]
} | {
"QualityItem": "塗布量",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示箇所に塗布米粒:2",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "台車取付部ﾒﾀﾙ圧入治具",
"Size": "",
"ToolOther": "FM-2144",
"WorkName": "ﾚﾊﾞｰ組立2",
"WorkItems": [
"3. 1完成品に2完成品を圧入する"
],
"WorkPoints": [
"塗布位置",
"継ぎ目位置"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": [
"◆作業者安全作業"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-2144",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "3㎜",
"ToolOther": "3.2N･m",
"WorkName": "ﾚﾊﾞｰ組立2",
"WorkItems": [
"4. 3完成品にBOLT を取付ける"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 3.2N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": [
"◆作業者安全作業"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "3.2N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｱﾙｶﾝｻｽ",
"Size": "",
"ToolOther": "",
"WorkName": "A003ﾌﾞﾗｹｯﾄ組立",
"WorkItems": [
"1. ①②に砥石をかけ②を⑯で取付ける"
],
"WorkPoints": [
"当付け"
],
"Tolks": [
"締付ﾄﾙｸ 9.8N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": []
} | {
"QualityItem": "表面確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "ﾊﾞﾘ等無き事",
"Method": "ｱﾙｶﾝｻｽ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "9.8N･m",
"WorkName": "A003ﾌﾞﾗｹｯﾄ組立",
"WorkItems": [
"1. ①②に砥石をかけ②を⑯で取付ける"
],
"WorkPoints": [
"当付け"
],
"Tolks": [
"締付ﾄﾙｸ 9.8N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "9.8N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"ToolOther": "",
"WorkName": "A003ﾌﾞﾗｹｯﾄ組立",
"WorkItems": [
"2. 1完成品に③を取付ける"
],
"WorkPoints": [
"ﾅｯﾄの向きに注意すること",
"六角穴側"
],
"Tolks": [
"締付ﾄﾙｸ 12.0N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": [
"5㎜"
]
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "寸法:端面より5.0㎜±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸｽﾊﾟﾅ",
"Size": "13㎜",
"ToolOther": "12.0N･m",
"WorkName": "A003ﾌﾞﾗｹｯﾄ組立",
"WorkItems": [
"2. 1完成品に③を取付ける"
],
"WorkPoints": [
"ﾅｯﾄの向きに注意すること",
"六角穴側"
],
"Tolks": [
"締付ﾄﾙｸ 12.0N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": [
"5㎜"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "12.0N･m±10%",
"Method": "ﾄﾙｸｽﾊﾟﾅ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"ToolOther": "",
"WorkName": "ｼﾘﾝﾀﾞｰ組立",
"WorkItems": [
"4. 3完成品にROD-END をNUT で仮に取付ける"
],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": [
"20㎜",
"仮止め:SD-A052311-005にて本締め"
]
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示寸法20㎜±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "8㎜",
"ToolOther": "25.0N･m",
"WorkName": "ｼﾘﾝﾀﾞｰ組立",
"WorkItems": [
"3. 2完成品に②を③で取付ける"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 25.0N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "25.0N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸｽﾊﾟﾅ",
"Size": "14㎜",
"ToolOther": "10.0N･m",
"WorkName": "ｼﾘﾝﾀﾞｰ組立",
"WorkItems": [
"2. 1完成品にJOINT を取付ける"
],
"WorkPoints": [
"ねじ込み後絶対に戻さないで下さい",
"ねじ込み後､緩めた場合は再利用不可"
],
"Tolks": [
"締付ﾄﾙｸ 10.0N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "10.0N･m±10%",
"Method": "ﾄﾙｸｽﾊﾟﾅ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾛｯﾄﾞｴﾝﾄﾞ寸法出し治具",
"Size": "",
"ToolOther": "FM-2906",
"WorkName": "ｺﾈｸﾃｨﾝｸﾞﾛｯﾄﾞ長さ調整",
"WorkItems": [
"1. ①のﾛｯﾄﾞ長さを調整する"
],
"WorkPoints": [
"･ｽﾊﾟﾅを手前に回すとﾛｯﾄﾞｴﾝﾄﾞが縮む･奥へ押しながら回すと伸びる方向になる",
"1.0mmが通り1.1mmが通ら無い事",
"調整を行う前に必ずｴｱｰ供給治具よりｴｱｰを入れておく事"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": []
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-2906",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｼｯｸﾈｽｹﾞｰｼﾞ",
"Size": "1.0㎜",
"ToolOther": "",
"WorkName": "ｺﾈｸﾃｨﾝｸﾞﾛｯﾄﾞ長さ調整",
"WorkItems": [
"1. ①のﾛｯﾄﾞ長さを調整する"
],
"WorkPoints": [
"･ｽﾊﾟﾅを手前に回すとﾛｯﾄﾞｴﾝﾄﾞが縮む･奥へ押しながら回すと伸びる方向になる",
"1.0mmが通り1.1mmが通ら無い事",
"調整を行う前に必ずｴｱｰ供給治具よりｴｱｰを入れておく事"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": []
} | {
"QualityItem": "隙間確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "1.0㎜が通るように調整する事",
"Method": "ｼｯｸﾈｽｹﾞｰｼﾞ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｼｯｸﾈｽｹﾞｰｼﾞ",
"Size": "1.0㎜",
"ToolOther": "",
"WorkName": "ｺﾈｸﾃｨﾝｸﾞﾛｯﾄﾞ長さ調整",
"WorkItems": [
"1. ①のﾛｯﾄﾞ長さを調整する"
],
"WorkPoints": [
"･ｽﾊﾟﾅを手前に回すとﾛｯﾄﾞｴﾝﾄﾞが縮む･奥へ押しながら回すと伸びる方向になる",
"1.0mmが通り1.1mmが通ら無い事",
"調整を行う前に必ずｴｱｰ供給治具よりｴｱｰを入れておく事"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": []
} | {
"QualityItem": "隙間確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "1.1㎜が通らないように調整する事",
"Method": "ｼｯｸﾈｽｹﾞｰｼﾞ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｴｱｰ供給治具",
"Size": "",
"ToolOther": "FM-2446",
"WorkName": "ｺﾈｸﾃｨﾝｸﾞﾛｯﾄﾞ長さ調整",
"WorkItems": [
"1. ①のﾛｯﾄﾞ長さを調整する"
],
"WorkPoints": [
"･ｽﾊﾟﾅを手前に回すとﾛｯﾄﾞｴﾝﾄﾞが縮む･奥へ押しながら回すと伸びる方向になる",
"1.0mmが通り1.1mmが通ら無い事",
"調整を行う前に必ずｴｱｰ供給治具よりｴｱｰを入れておく事"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": []
} | {
"QualityItem": "動作確認",
"ToolManageNo": "FM-2446",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "PHﾁｪｯｶｰ",
"Size": "",
"ToolOther": "FM-2375",
"WorkName": "ｼﾘﾝﾀﾞｰ組立(ﾘｰﾄﾞｽｲｯﾁ取付け)",
"WorkItems": [
"1. ①にSWITCH(400MM) を取付ける"
],
"WorkPoints": [
"PHﾁｪｯｶｰを接続し､必ずｴｱｰを入れた状態で調整を行う",
"取付け位置:42㎜±0.5㎜"
],
"Tolks": [
"締付ﾄﾙｸ 10cN･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": [
"検査表①:ｼﾘﾝﾀﾞL/S位置調整"
]
} | {
"QualityItem": "位置確認",
"ToolManageNo": "FM-2375",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "設定幅時にｾﾝｻがONする事",
"Method": "PHﾁｪｯｶｰ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾛｯﾄﾞｴﾝﾄﾞ寸法出し治具",
"Size": "",
"ToolOther": "FM-2906",
"WorkName": "ｼﾘﾝﾀﾞｰ組立(ﾘｰﾄﾞｽｲｯﾁ取付け)",
"WorkItems": [
"1. ①にSWITCH(400MM) を取付ける"
],
"WorkPoints": [
"PHﾁｪｯｶｰを接続し､必ずｴｱｰを入れた状態で調整を行う",
"取付け位置:42㎜±0.5㎜"
],
"Tolks": [
"締付ﾄﾙｸ 10cN･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": [
"検査表①:ｼﾘﾝﾀﾞL/S位置調整"
]
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "FM-2906",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "1.6㎜(ﾏｲﾅｽ)",
"ToolOther": "10cN･m",
"WorkName": "ｼﾘﾝﾀﾞｰ組立(ﾘｰﾄﾞｽｲｯﾁ取付け)",
"WorkItems": [
"1. ①にSWITCH(400MM) を取付ける"
],
"WorkPoints": [
"PHﾁｪｯｶｰを接続し､必ずｴｱｰを入れた状態で調整を行う",
"取付け位置:42㎜±0.5㎜"
],
"Tolks": [
"締付ﾄﾙｸ 10cN･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": [
"検査表①:ｼﾘﾝﾀﾞL/S位置調整"
]
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "10cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "150㎜",
"ToolOther": "",
"WorkName": "ｼﾘﾝﾀﾞｰ組立(ﾘｰﾄﾞｽｲｯﾁ取付け)",
"WorkItems": [
"1. ①にSWITCH(400MM) を取付ける"
],
"WorkPoints": [
"PHﾁｪｯｶｰを接続し､必ずｴｱｰを入れた状態で調整を行う",
"取付け位置:42㎜±0.5㎜"
],
"Tolks": [
"締付ﾄﾙｸ 10cN･m"
],
"InspectionNo": "WETE-G002-C17",
"InspectionItems": [
"検査表①:ｼﾘﾝﾀﾞL/S位置調整"
],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": []
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "寸法の位置に取付けてある事指示寸法41㎜±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｴｱｰ供給治具",
"Size": "",
"ToolOther": "FM-2446",
"WorkName": "ｼﾘﾝﾀﾞｰ組立(ﾘｰﾄﾞｽｲｯﾁ取付け)",
"WorkItems": [
"1. ①にSWITCH(400MM) を取付ける"
],
"WorkPoints": [
"PHﾁｪｯｶｰを接続し､必ずｴｱｰを入れた状態で調整を行う",
"取付け位置:42㎜±0.5㎜"
],
"Tolks": [
"締付ﾄﾙｸ 10cN･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": [
"検査表①:ｼﾘﾝﾀﾞL/S位置調整"
]
} | {
"QualityItem": "動作確認",
"ToolManageNo": "FM-2446",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｽｹｰﾙ",
"Size": "300㎜",
"ToolOther": "",
"WorkName": "ﾗﾍﾞﾙ貼付け",
"WorkItems": [
"1. PLATE に⑤LABEL を貼付ける"
],
"WorkPoints": [
"LABEL はITF17連/ASF34連交換台車駆動部(右側)に配膳されたものを使用する"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": [
"70㎜",
"55㎜",
"233㎜",
"9㎜"
]
} | {
"QualityItem": "寸法確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "寸法の位置に貼付けている事指示寸法±0.5㎜",
"Method": "ｽｹｰﾙ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "6㎜",
"ToolOther": "20.5N･m",
"WorkName": "側面ﾌﾞﾗｹｯﾄ組立",
"WorkItems": [
"1. ①にPOST をBOLT WASHER で取付ける"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 20.5N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "20.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "3㎜",
"ToolOther": "194cN･m",
"WorkName": "側面ﾌﾞﾗｹｯﾄ組立",
"WorkItems": [
"3. 2完成品にBRACKET をBOLT WASHER で取付ける"
],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 194cN･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "194cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "4㎜",
"ToolOther": "5.3N･m",
"WorkName": "側面ﾌﾞﾗｹｯﾄ組立",
"WorkItems": [
"2. 1完成品にPOST をBOLT WASHER で取付ける"
],
"WorkPoints": [
"Hｶｯﾄの方向",
"Hｶｯﾄの方向"
],
"Tolks": [
"締付ﾄﾙｸ 5.3N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"◆作業者安全作業"
],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "5.3N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "No.2",
"ToolOther": "55cN･m",
"WorkName": "ｽｲｯﾁ配線接続",
"WorkItems": [
"■1. SWITCH の型式確認をし､ﾛｯﾄNo.を記録する",
"2. SWITCH のｽｲｯﾁﾚﾊﾞｰを組替える"
],
"WorkPoints": [
"ﾚﾊﾞｰ部組替え後必ず動作確認を行うﾚﾊﾞｰを動作させ､引っかかりが無い事",
"先端部を取外し反時計回りに90度向きを変更し取付ける"
],
"Tolks": [
"締付ﾄﾙｸ 55cN･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業",
"■安全作業",
"◆作業者安全作業"
],
"Words": [
"検査表SWITCH :ﾘﾐｯﾄｽｲｯﾁの型式確認･ﾛｯﾄNo.記録",
"■安全作業"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "55cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程",
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "No.2",
"ToolOther": "170cN･m",
"WorkName": "ｽｲｯﾁ配線接続",
"WorkItems": [
"■1. SWITCH の型式確認をし､ﾛｯﾄNo.を記録する",
"2. SWITCH のｽｲｯﾁﾚﾊﾞｰを組替える"
],
"WorkPoints": [
"ﾚﾊﾞｰ部組替え後必ず動作確認を行うﾚﾊﾞｰを動作させ､引っかかりが無い事",
"先端部を取外し反時計回りに90度向きを変更し取付ける"
],
"Tolks": [
"締付ﾄﾙｸ 55cN･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業",
"■安全作業",
"◆作業者安全作業"
],
"Words": [
"検査表SWITCH :ﾘﾐｯﾄｽｲｯﾁの型式確認･ﾛｯﾄNo.記録",
"■安全作業"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "170cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"作業者安全工程",
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "No.2",
"ToolOther": "70cN･m",
"WorkName": "ｽｲｯﾁ配線接続",
"WorkItems": [
"■3. 2完成品にJOINT を取付し､CABLE の配線を接続する"
],
"WorkPoints": [
"ﾚﾊﾞｰは反転させ取付ける",
"JOINTを締込み配線を固定する",
"配線をJOINTに通す",
"ｶﾊﾞｰを閉じﾈｼﾞを締結する",
"ｶﾊﾞｰを開け端子をﾗﾍﾞﾙと同じ箇所に接続する"
],
"Tolks": [
"締付ﾄﾙｸ 170cN･m",
"締付ﾄﾙｸ 60cN･m",
"締付ﾄﾙｸ 70cN･m"
],
"InspectionNo": "WETE-G002-C17",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"検査表SWITCH :ﾘﾐｯﾄｽｲｯﾁのﾈｼﾞ締めﾄﾙｸ確認",
"■安全作業"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "70cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "No.2",
"ToolOther": "60cN･m",
"WorkName": "ｽｲｯﾁ配線接続",
"WorkItems": [
"■3. 2完成品にJOINT を取付し､CABLE の配線を接続する"
],
"WorkPoints": [
"ﾚﾊﾞｰは反転させ取付ける",
"JOINTを締込み配線を固定する",
"配線をJOINTに通す",
"ｶﾊﾞｰを閉じﾈｼﾞを締結する",
"ｶﾊﾞｰを開け端子をﾗﾍﾞﾙと同じ箇所に接続する"
],
"Tolks": [
"締付ﾄﾙｸ 170cN･m",
"締付ﾄﾙｸ 60cN･m",
"締付ﾄﾙｸ 70cN･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"検査表SWITCH :ﾘﾐｯﾄｽｲｯﾁのﾈｼﾞ締めﾄﾙｸ確認",
"■安全作業"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "60cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸｽﾊﾟﾅ",
"Size": "",
"ToolOther": "",
"WorkName": "ｽｲｯﾁ配線接続",
"WorkItems": [
"■1. SWITCH の型式確認をし､ﾛｯﾄNo.を記録する",
"2. SWITCH のｽｲｯﾁﾚﾊﾞｰを組替える",
"■3. 2完成品にJOINT を取付し､CABLE の配線を接続する"
],
"WorkPoints": [
"ﾚﾊﾞｰは反転させ取付ける",
"ﾚﾊﾞｰ部組替え後必ず動作確認を行うﾚﾊﾞｰを動作させ､引っかかりが無い事",
"JOINTを締込み配線を固定する",
"配線をJOINTに通す",
"ｶﾊﾞｰを閉じﾈｼﾞを締結する",
"ｶﾊﾞｰを開け端子をﾗﾍﾞﾙと同じ箇所に接続する",
"先端部を取外し反時計回りに90度向きを変更し取付ける"
],
"Tolks": [
"締付ﾄﾙｸ 55cN･m",
"締付ﾄﾙｸ 170cN･m",
"締付ﾄﾙｸ 60cN･m",
"締付ﾄﾙｸ 70cN･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業",
"■安全作業"
],
"Words": [
"検査表SWITCH :ﾘﾐｯﾄｽｲｯﾁの型式確認･ﾛｯﾄNo.記録",
"検査表SWITCH :ﾘﾐｯﾄｽｲｯﾁのﾈｼﾞ締めﾄﾙｸ確認"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "2.0N･m±10%",
"Method": "ﾄﾙｸｽﾊﾟﾅ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸｽﾊﾟﾅ",
"Size": "",
"ToolOther": "",
"WorkName": "ｽｲｯﾁ配線接続",
"WorkItems": [
"■1. SWITCH の型式確認をし､ﾛｯﾄNo.を記録する",
"2. SWITCH のｽｲｯﾁﾚﾊﾞｰを組替える",
"■3. 2完成品にJOINT を取付し､CABLE の配線を接続する"
],
"WorkPoints": [
"ﾚﾊﾞｰは反転させ取付ける",
"ﾚﾊﾞｰ部組替え後必ず動作確認を行うﾚﾊﾞｰを動作させ､引っかかりが無い事",
"JOINTを締込み配線を固定する",
"配線をJOINTに通す",
"ｶﾊﾞｰを閉じﾈｼﾞを締結する",
"ｶﾊﾞｰを開け端子をﾗﾍﾞﾙと同じ箇所に接続する",
"先端部を取外し反時計回りに90度向きを変更し取付ける"
],
"Tolks": [
"締付ﾄﾙｸ 55cN･m",
"締付ﾄﾙｸ 170cN･m",
"締付ﾄﾙｸ 60cN･m",
"締付ﾄﾙｸ 70cN･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業",
"■安全作業"
],
"Words": [
"検査表SWITCH :ﾘﾐｯﾄｽｲｯﾁの型式確認･ﾛｯﾄNo.記録",
"検査表SWITCH :ﾘﾐｯﾄｽｲｯﾁのﾈｼﾞ締めﾄﾙｸ確認"
]
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "1.5N･m±10%",
"Method": "ﾄﾙｸｽﾊﾟﾅ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ｽｲｯﾁ配線接続",
"WorkItems": [
"■1. SWITCH の型式確認をし､ﾛｯﾄNo.を記録する",
"2. SWITCH のｽｲｯﾁﾚﾊﾞｰを組替える",
"■3. 2完成品にJOINT を取付し､CABLE の配線を接続する"
],
"WorkPoints": [
"ﾚﾊﾞｰは反転させ取付ける",
"ﾚﾊﾞｰ部組替え後必ず動作確認を行うﾚﾊﾞｰを動作させ､引っかかりが無い事",
"JOINTを締込み配線を固定する",
"配線をJOINTに通す",
"ｶﾊﾞｰを閉じﾈｼﾞを締結する",
"ｶﾊﾞｰを開け端子をﾗﾍﾞﾙと同じ箇所に接続する",
"先端部を取外し反時計回りに90度向きを変更し取付ける"
],
"Tolks": [
"締付ﾄﾙｸ 55cN･m",
"締付ﾄﾙｸ 170cN･m",
"締付ﾄﾙｸ 60cN･m",
"締付ﾄﾙｸ 70cN･m"
],
"InspectionNo": "WETE-G002-C17",
"InspectionItems": [
"検査表SWITCH :ﾘﾐｯﾄｽｲｯﾁのﾈｼﾞ締めﾄﾙｸ確認"
],
"WorkTypes": [
"■安全作業",
"■安全作業"
],
"Words": [
"検査表SWITCH :ﾘﾐｯﾄｽｲｯﾁの型式確認･ﾛｯﾄNo.記録",
"WETE-G002-C17"
]
} | {
"QualityItem": "型式確認･製造番号記録",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "型式･検査書確認､及びｼﾘｱﾙNo.転記",
"Method": "目視",
"RecordMethod": "WETE-G002-C17",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "ｽｲｯﾁ配線接続",
"WorkItems": [
"■1. SWITCH の型式確認をし､ﾛｯﾄNo.を記録する",
"2. SWITCH のｽｲｯﾁﾚﾊﾞｰを組替える",
"■3. 2完成品にJOINT を取付し､CABLE の配線を接続する"
],
"WorkPoints": [
"ﾚﾊﾞｰは反転させ取付ける",
"ﾚﾊﾞｰ部組替え後必ず動作確認を行うﾚﾊﾞｰを動作させ､引っかかりが無い事",
"JOINTを締込み配線を固定する",
"配線をJOINTに通す",
"ｶﾊﾞｰを閉じﾈｼﾞを締結する",
"ｶﾊﾞｰを開け端子をﾗﾍﾞﾙと同じ箇所に接続する",
"先端部を取外し反時計回りに90度向きを変更し取付ける"
],
"Tolks": [
"締付ﾄﾙｸ 55cN･m",
"締付ﾄﾙｸ 170cN･m",
"締付ﾄﾙｸ 60cN･m",
"締付ﾄﾙｸ 70cN･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業",
"■安全作業"
],
"Words": [
"検査表SWITCH :ﾘﾐｯﾄｽｲｯﾁの型式確認･ﾛｯﾄNo.記録",
"検査表SWITCH :ﾘﾐｯﾄｽｲｯﾁのﾈｼﾞ締めﾄﾙｸ確認",
"WETE-G002-C17"
]
} | {
"QualityItem": "型式確認･製造番号記録",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "検査表の有無を確認する事",
"Method": "目視",
"RecordMethod": "WETE-G002-C17",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"Size": "3㎜",
"ToolOther": "150cN･m",
"WorkName": "ｽｲｯﾁﾌﾞﾗｹｯﾄ組立",
"WorkItems": [
"1. PLATE に①のSWをBOLT WASHER WASHER で取付ける"
],
"WorkPoints": [
"ﾌﾞﾗｹｯﾄに対し平行に取付けの事(面位置)"
],
"Tolks": [
"締付ﾄﾙｸ 150cN･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "150cN･m±10%",
"Method": "ﾄﾙｸﾄﾞﾗｲﾊﾞｰ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "8㎜",
"ToolOther": "40N･m",
"WorkName": "駆動部組立2",
"WorkItems": [
"2. 1完成品にｽﾀﾝﾄﾞ治具に取付ける"
],
"WorkPoints": [
"治具ﾎﾞﾙﾄ(M10×35)",
"PINに挿入"
],
"Tolks": [
"締付ﾄﾙｸ 40N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "40N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "交換台車駆動部置台(NPM-GW17)",
"Size": "",
"ToolOther": "FM-6422",
"WorkName": "駆動部組立2",
"WorkItems": [
"1. ①に②をBOLT WASHER で仮に取付ける",
"2. 1完成品にｽﾀﾝﾄﾞ治具に取付ける"
],
"WorkPoints": [
"治具ﾎﾞﾙﾄ(M10×35)",
"PINに挿入"
],
"Tolks": [
"締付ﾄﾙｸ 40N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"仮止め:SD-A052311-013にて本締め"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-6422",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "交換台車駆動部置台(NPM-GW17)",
"Size": "",
"ToolOther": "FM-6422",
"WorkName": "駆動部組立2",
"WorkItems": [
"1. ①に治具を仮に取付ける",
"2. 1完成品に治具ﾋﾟﾝ(Φ3.99)を入れる"
],
"WorkPoints": [
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"仮止め:SD-A052311-013にて本締め"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-6422",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "台車駆動鋳物との位置決めｼﾞｸﾞ(17連左側)",
"Size": "",
"ToolOther": "FM-6420",
"WorkName": "駆動部組立2",
"WorkItems": [
"1. ①に治具を仮に取付ける",
"2. 1完成品に治具ﾋﾟﾝ(Φ3.99)を入れる"
],
"WorkPoints": [
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"仮止め:SD-A052311-013にて本締め"
]
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-6420",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "6㎜",
"ToolOther": "12.0N･m",
"WorkName": "駆動部組立3",
"WorkItems": [
"1. 隙間を確認し治具を固定する",
"2. M8ﾎﾞﾙﾄを3ヶ所締め付ける"
],
"WorkPoints": [
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています",
"3点をﾌﾞﾗｹｯﾄに当付ける"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "12.0N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｼｯｸﾈｽｹﾞｰｼﾞ",
"Size": "0.03㎜",
"ToolOther": "",
"WorkName": "駆動部組立3",
"WorkItems": [
"1. 隙間を確認し治具を固定する",
"2. M8ﾎﾞﾙﾄを3ヶ所締め付ける"
],
"WorkPoints": [
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています",
"3点をﾌﾞﾗｹｯﾄに当付ける"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "隙間確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "0.03㎜ｼｯｸﾈｽｹﾞｰｼﾞが通ら無い事",
"Method": "ｼｯｸﾈｽｹﾞｰｼﾞ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "台車駆動鋳物との位置決めｼﾞｸﾞ(17連左側)",
"Size": "",
"ToolOther": "FM-6420",
"WorkName": "駆動部組立3",
"WorkItems": [
"1. 隙間を確認し治具を固定する",
"2. M8ﾎﾞﾙﾄを3ヶ所締め付ける"
],
"WorkPoints": [
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています",
"2点を締め付ける",
"3点をﾌﾞﾗｹｯﾄに当付ける"
],
"Tolks": [
"締付ﾄﾙｸ 20.5N･m",
"締付ﾄﾙｸ 12.0N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-6420",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "交換台車駆動部置台(NPM-GW17)",
"Size": "",
"ToolOther": "FM-6422",
"WorkName": "駆動部組立3",
"WorkItems": [
"1. 隙間を確認し治具を固定する",
"2. M8ﾎﾞﾙﾄを3ヶ所締め付ける"
],
"WorkPoints": [
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています",
"2点を締め付ける",
"3点をﾌﾞﾗｹｯﾄに当付ける"
],
"Tolks": [
"締付ﾄﾙｸ 20.5N･m",
"締付ﾄﾙｸ 12.0N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-6422",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "6㎜",
"ToolOther": "20.5N･m",
"WorkName": "駆動部組立3",
"WorkItems": [],
"WorkPoints": [
"2点を締め付ける"
],
"Tolks": [
"締付ﾄﾙｸ 20.5N･m",
"締付ﾄﾙｸ 12.0N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "20.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "5㎜",
"ToolOther": "6.0N･m",
"WorkName": "駆動部組立4",
"WorkItems": [],
"WorkPoints": [],
"Tolks": [
"締付ﾄﾙｸ 6.0N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "6.0N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "台車駆動鋳物との位置決めｼﾞｸﾞ(17連左側)",
"Size": "",
"ToolOther": "FM-6420",
"WorkName": "駆動部組立4",
"WorkItems": [
"1. ①のﾌﾞﾛｯｸを外す",
"2. 1完成品にBRACKET をBOLT WASHER で取付ける"
],
"WorkPoints": [
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています",
"ｾﾝﾀｰ取付けの事"
],
"Tolks": [
"締付ﾄﾙｸ 6.0N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-6420",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "交換台車駆動部置台(NPM-GW17)",
"Size": "",
"ToolOther": "FM-6422",
"WorkName": "駆動部組立4",
"WorkItems": [
"1. ①のﾌﾞﾛｯｸを外す",
"2. 1完成品にBRACKET をBOLT WASHER で取付ける"
],
"WorkPoints": [
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています",
"ｾﾝﾀｰ取付けの事"
],
"Tolks": [
"締付ﾄﾙｸ 6.0N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-6422",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ﾄﾙｸﾚﾝﾁ",
"Size": "6㎜",
"ToolOther": "20.5N･m",
"WorkName": "駆動部組立5",
"WorkItems": [
"1. ①にBLOCK をBOLT で取付ける"
],
"WorkPoints": [
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています",
"2点を当付ける"
],
"Tolks": [
"締付ﾄﾙｸ 20.5N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "締付ﾄﾙｸ",
"ToolManageNo": "-",
"ToolCycle": "日常点検(1回/日)",
"ToolRecord": "ﾄﾙｸﾁｪｯｸ台帳",
"StdVal": "20.5N･m±10%",
"Method": "ﾄﾙｸﾚﾝﾁ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｼｯｸﾈｽｹﾞｰｼﾞ",
"Size": "0.03㎜",
"ToolOther": "",
"WorkName": "駆動部組立5",
"WorkItems": [
"1. ①にBLOCK をBOLT で取付ける"
],
"WorkPoints": [
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています",
"2点を当付ける"
],
"Tolks": [
"締付ﾄﾙｸ 20.5N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "隙間確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "0.03㎜ｼｯｸﾈｽｹﾞｰｼﾞが通ら無い事",
"Method": "ｼｯｸﾈｽｹﾞｰｼﾞ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "台車駆動鋳物との位置決めｼﾞｸﾞ(17連左側)",
"Size": "",
"ToolOther": "FM-6420",
"WorkName": "駆動部組立5",
"WorkItems": [
"1. ①にBLOCK をBOLT で取付ける"
],
"WorkPoints": [
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています",
"2点を当付ける"
],
"Tolks": [
"締付ﾄﾙｸ 20.5N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-6420",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "交換台車駆動部置台(NPM-GW17)",
"Size": "",
"ToolOther": "FM-6422",
"WorkName": "駆動部組立5",
"WorkItems": [
"1. ①にBLOCK をBOLT で取付ける"
],
"WorkPoints": [
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています",
"2点を当付ける"
],
"Tolks": [
"締付ﾄﾙｸ 20.5N･m"
],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-6422",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "ｼｯｸﾈｽｹﾞｰｼﾞ",
"Size": "0.05㎜",
"ToolOther": "",
"WorkName": "駆動部組立6",
"WorkItems": [
"2. 各隙間を確認する",
"3. 位置決め治具を取り外す"
],
"WorkPoints": [],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "隙間確認",
"ToolManageNo": "-",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "0.05㎜ｼｯｸﾈｽｹﾞｰｼﾞが通ら無い事",
"Method": "ｼｯｸﾈｽｹﾞｰｼﾞ",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "台車駆動鋳物との位置決めｼﾞｸﾞ(17連左側)",
"Size": "",
"ToolOther": "FM-6420",
"WorkName": "駆動部組立6",
"WorkItems": [
"2. 各隙間を確認する",
"3. 位置決め治具を取り外す",
"1. ①の勘合を治具ﾋﾟﾝ(Φ3,97)で確認する"
],
"WorkPoints": [
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-6420",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "交換台車駆動部置台(NPM-GW17)",
"Size": "",
"ToolOther": "FM-6422",
"WorkName": "駆動部組立6",
"WorkItems": [
"2. 各隙間を確認する",
"3. 位置決め治具を取り外す",
"1. ①の勘合を治具ﾋﾟﾝ(Φ3,97)で確認する"
],
"WorkPoints": [
"ｽﾀﾝﾄﾞ治具に取付状態ですが削除しています"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": []
} | {
"QualityItem": "取付確認",
"ToolManageNo": "FM-6422",
"ToolCycle": "校正対象外",
"ToolRecord": "-",
"StdVal": "指示通り取付け出来ている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null | |
{
"ToolName": "-",
"Size": "",
"ToolOther": "",
"WorkName": "駆動部組立7(ﾌﾞﾛｯｸ組立)",
"WorkItems": [
"1. BLOCK にPLATE をBOLT で仮に取付ける",
"2. 1完成品にBOLT を入れる"
],
"WorkPoints": [
"端面面位置",
"取付け方向",
"面取り有"
],
"Tolks": [],
"InspectionNo": "",
"InspectionItems": [],
"WorkTypes": [
"■安全作業"
],
"Words": [
"仮止め:SD-A052311-018にて本締め"
]
} | {
"QualityItem": "取付位置確認",
"ToolManageNo": "-",
"ToolCycle": "-",
"ToolRecord": "-",
"StdVal": "指示通り取付けられている事",
"Method": "目視",
"RecordMethod": "-",
"Other": "-",
"ProcessNames": [
"安全工程"
]
} | information_extraction | 0 | null |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.