Datasets:

HuggingFaceFW

/

fineweb-edu-score-2

like 64

Follow

HuggingFaceFW 238

Sokovo inaugurates vertical farm at Dubai Industrial City to bolster national food security agenda • State-of-the-art facility will annually produce 360 tonnes of leafy greens and microgreens • Sokovo’s facility will enable the ambitions of the National Food Security Strategy 2051 and Dubai Economic Agenda ‘D33’ Dubai, UAE, 11 December 2023: As the global push towards positive climate action prompts greater investment in sustainable food production, Sokovo has inaugurated its vertical farm to produce leafy greens and microgreens at Dubai Industrial City, part of TECOM Group PJSC. Sokovo’s factory inauguration contributes to the UAE’s push for food security, which also features on the agenda for the United Nations Climate Change Conference 2023 (COP28) that is under way at EXPO City Dubai until 12 December. The indoor farm has a plot size of more than 100,000 sq ft. with a total built-up area spanning over 20,000 sq.ft and production capacity of 360 tonnes – equivalent to almost 160 unloaded standard twenty-foot shipping containers. It joins a dedicated F&B economic zone at Dubai Industrial City and will grow fresh kale, spinach, lettuce, basil, and rosemary, among other leafy greens and microgreens. The farm will supply its produce to hypermarkets, hotels, and restaurants across the country, helping to reduce reliance on food imports and meet the needs of the UAE’s growing population. “The challenges of farming in the desert belong to the past,” said Saud Abu Alshawareb, Executive Vice President of Industrial at TECOM Group, on behalf of Dubai Industrial City. “Vertical farming provides an outstanding solution to ensuring the UAE’s residents have access to freshly grown produce, especially as demand grows in line with the population. “The launch of Sokovo’s advanced hydroponic farm at Dubai Industrial City brings us closer to achieving the goals of the UAE’s National Food Security Strategy 2051 while furthering the ambitions of the Dubai Economic Agenda ‘D33’, Operation 300bn, and Make it in the Emirates visions to enhance the UAE’s local supply chains across various sectors.” Harsh Gurbani, Owner of Sokovo, said: “Dubai Industrial City has been a key supporter in the setting up and establishment of our farm, which focuses on sustainability by ensuring its water intake is recycled and reused. We also ensure the maximum use of natural sunlight in a temperature-controlled environment and remain committed to supplying the UAE with pesticide-free locally and freshly produced items. As long-term residents of the UAE, we are proud to contribute towards making the country more independent and self-sufficient to enhance its food security.” Sokovo’s state-of-the-art hydroponic facility uses sustainable design and technologies to ensure high-quality yield and efficient resource consumption without pesticides. It features 7-metre-tall towers with a double retractable sunroof to ensure all crops receive maximum and equal exposure to renewable natural light while reducing electricity consumption. The facility’s launch follows Dubai Industrial City’s strategic partnership with the UAE’s Ministry of Climate Change and Environment (MOCCAE) in May 2023 to boost food security in the UAE. Signed on the side lines of Dubai Industrial City’s Make Brilliance awareness campaign, the agreement will see both parties promoting advanced technology adoption and emphasising the importance of innovation, knowledge-sharing, and nutrition security. Dubai Industrial City is among the region’s leading industrial manufacturing and logistics hubs, catalysing the strengthening of the UAE’s industrial sector as the home of more than 800 customers, including F&B industry leaders, such as Nutridor, Al Barakah Dates, Patchi, and Barakat Quality Plus. Featuring more than 300 operational factories, Dubai Industrial City belongs to TECOM Group’s portfolio of 10 business districts, including Dubai Internet City, Dubai Media City, Dubai Studio City, Dubai Production City, Dubai Science Park, Dubai Knowledge Park, Dubai International Academic City, and Dubai Design District (d3).

<urn:uuid:403b90b2-ba5c-4bef-ba92-bd4a1a50f236>

CC-MAIN-2024-10

https://tecomgroup.ae/press-release-Sokovo-inaugurates-vertical-farm-at-Dubai-Industrial-City-to-bolster-national-food-security-agenda.html

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Pharma drug producing has been an integral a 50 % of the modern day health care trade, answerable for the production of lifestyle-saving medicines that have improved hundreds of thousands of life. Behind the medicines that we count on to deal with ailments and deal with situations lies a complex and engaging procedure. From formulation to packaging, the journey of a pharmaceutical merchandise involves meticulous investigation, progressive approaches, and stringent qc. At its main, pharma drug producing brings together the knowledge of chemistry, biology, and engineering to create secured and effective medication. It includes a sequence of exact measures that embody the synthesis of energetic pharmaceutical factors (APIs), formulation improvement, dosage type layout, and the scaling up of manufacturing to satisfy the global desire. This intricate approach is ruled by rigorous rules and specifications to make sure the ideal level of safety, efficacy, and high quality in every single capsule that reaches sufferers’ arms. Guiding the scenes, laboratories geared up with slicing-edge technology function the birthplace of current medicine. Here, pharmaceutical chemists work tirelessly, executing experiments and conducting trials to create the ideal mix of components and procedures. Their skills permits them to rework promising molecules into potent medicines, addressing many effectively currently being conditions related to cardiovascular ailments, most cancers, and infectious illnesses. The improvement of pharmaceutical science and know-how has paved the finest way for breakthroughs in drug producing, allowing for the manufacturing of extra targeted therapies with fewer undesired aspect outcomes. Pharma drug manufacturing does not stop at the laboratory stage it extends to huge-scale manufacturing amenities in which medicines are produced in bulk parts. These amenities use exceptional production approaches, such as higher-precision gear, automatic systems, and demanding good quality administration steps. Every phase of the manufacturing method is rigorously monitored and validated to guarantee regularity, uniformity, and adherence to stringent ideas. The manufacturing location by itself is strictly managed to make certain the integrity and purity of the medications, safeguarding sufferers’ health and well-currently being. In the realm of pharma drug producing, precision, innovation, and dedication converge to give the globe with lifestyle-changing medications. The meticulous nature of this training course of, coupled with the consistent pursuit of scientific developments, guarantees that high quality and efficacy are not compromised. This vital trade performs a crucial place in bettering health care results, offering hope to patients worldwide. As we delve deeper into the secrets and techniques of pharma drug producing, we can identify the immense efforts and contributions of those who perform tirelessly driving the scenes, creating the capsule pioneers of our time. The Evolution of Pharma Drug Production Pharma drug production has come a good length all by way of historical previous, continuously evolving to fulfill the ever-escalating calls for of health care. From humble beginnings to innovative procedures, the trade has made outstanding strides in generating specified the producing of guarded and efficient prescription drugs. To begin with, pharmaceutical production mostly anxious the extraction and purification of active substances from pure resources. Medicinal vegetation, herbs, and animal products have been fastidiously sourced and processed to obtain the sought after therapeutic brokers. This labor-intense approach laid the muse for early pharmaceutical improvement. However, as scientific information superior, so did the techniques utilized in drug manufacturing. With the creation of chemical synthesis, scientists experienced been capable of create synthetic compounds with similar pharmacological qualities to these current in nature. This breakthrough permitted for higher management above the generation training course of, top to elevated consistency and substantial top quality of medications. In existing a long time, the appearance of experience has revolutionized pharma drug production even more. Automation and computerization have streamlined producing, considerably lowering the margin of mistake and growing effectivity. Advanced machinery and robotics at the next are utilized in various levels of drug manufacturing, from formulation and mixing to packaging and large quality administration. The evolution of pharma drug manufacturing has not entirely enhanced the sum and large top quality of drugs but has moreover improved security and regulatory compliance. Stringent good quality handle measures, equivalent to Excellent Manufacturing Techniques (GMP), mandated by regulatory authorities, make sure that pharmaceutical merchandise meet the required specifications for efficacy, security, and purity. As we delve more into the intricate entire world of pharma drug production, we uncover the secrets and techniques powering the difficult procedures and utilized sciences that push the company forward. Understanding these developments is crucial in appreciating the enormous initiatives invested to carry existence-saving medicines to people that want them most. Essential Procedure Steps in Drug Manufacturing First of all, pharma drug manufacturing entails a selection of vital methods to guarantee the generation of guarded and successful medications. These steps embody several levels, commencing with examination and growth and ending with the closing packaging and distribution of the medicines. Every stage plays a considerable placement in the general approach, making sure that medicines meet up with good quality requirements and regulatory necessities. The initial stage in drug production is the study and advancement portion. This section involves intense scientific research, geared towards finding and planning new medicines or enhancing present types. Scientists and researchers perform tirelessly to identify potential drug candidates and discover their efficiency and stability profiles. This area sets the foundation for subsequent steps inside the producing approach. cdmo services As soon as a promising drug prospect has been discovered, it strikes on to the formulation phase. Listed here, pharmaceutical specialists carefully figure out the the best possible composition and dosage type of the drug. Formulation scientists work to produce the most straightforward shipping and delivery program, no matter whether or not it be tablets, capsules, injectables, or various formulations. This phase is important in guaranteeing that the drug is regular, bioavailable, and easy to administer to sufferers. Up coming arrives the generation part, the place the drug is manufactured at a bigger scale. In this phase, pharmaceutical organizations put into action rigid high high quality management steps to guarantee the regular creation of higher-high quality medication. Manufacturing solutions have to adhere to Very good Producing Methods (GMP) pointers, which outline the demands and techniques necessary to hold up high quality, basic safety, and management during production. This segment contains diverse processes, which includes weighing, mixing, granulation, coating, and packaging, all carried out beneath managed problems. In conclusion, drug production encompasses a sequence of crucial process methods, commencing with examination and development, adopted by formulation and manufacturing. Each and every phase performs an critical purpose in ensuring the normal, efficacy, and safety of pharmaceutical treatment. By adhering to rigorous expectations and rules, pharmaceutical businesses can generate medicines that increase and help save life. Difficulties and Improvements within the Sector The spot of pharma drug manufacturing just isn’t without having its fair share of challenges. 1 major obstacle confronted by producers is the stringent regulatory needs. Govt agencies established stringent tips to make confident drug basic safety and efficacy earlier than they are typically accredited for public use. Adhering to those requirements phone calls for considerable investments in examination, testing, and compliance, typically ensuing in delays and elevated costs. Another dilemma pertains to the complexity of drug formulations. Developing and producing pharmaceutical treatment with exact composition and dosage kinds demands sophisticated utilized sciences and specialised procedures. Obtaining regular outcomes and keeping item integrity all through the producing process is frequently a challenging action. Any deviation from the specified high quality requirements can jeopardize individual security and regulatory compliance. To tackle these issues, fastened innovation has flip out to be an crucial for pharma drug producers. Improvements in know-how, corresponding to automation and robotics, have revolutionized drug production processes. These enhancements have not only enhanced the effectivity and accuracy of manufacturing but in addition minimized the possibility of human mistake. Furthermore, the integration of information analytics and actual-time checking tactics has enabled proactive top quality administration, making certain that any deviations are detected and corrected instantly. Additionally, the adoption of steady manufacturing techniques has emerged as a promising innovation in the trade. As opposed to standard batch production, which is time-consuming and useful resource-intense, steady manufacturing allows for a streamlined manufacturing training course of. This technique facilitates greater manage in excess of vital parameters and minimizes supplies waste, resulting in increased productiveness and expense-effectiveness. In conclusion, the pharma drug manufacturing industry grapples with problems posed by stringent regulatory requirements and the complexity of drug formulations. Nevertheless, by way of continual innovation, which includes developments in know-how and the adoption of novel manufacturing techniques, producers are locating alternatives to individuals issues. This sort of innovations not entirely boost effectiveness and large top quality administration but in addition contribute to the overall progression and expansion of the enterprise.

<urn:uuid:06421e7d-68e2-4ce5-aa7e-8f4226f738df>

CC-MAIN-2024-10

https://teleowork.com/the-pill-pioneers-unveiling-the-tricks-of-pharma-drug-manufacturing/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Consider this scenario: you’re a law enforcement officer in a SWAT unit, facing a high-risk situation where every moment is precious. The performance of your equipment, particularly your firearm’s sighting system, could be the deciding factor between a successful operation and a disastrous one. Red dot sights and your firearm’s built-in iron sights can be used. Each of these optics comes with its own set of advantages and drawbacks, displaying marked differences in terms of ease of use, precision, and versatility. Red dots provide the benefit of swift target acquisition and notably enhanced accuracy in low-light situations. Traditional iron sights are appreciated for their steadfast dependability and robustness. Let’s discuss more of these sights. What are Red Dot Optics and Iron Sights? Red dot optics and iron sights are two distinct sighting systems utilized in firearms, with each offering unique advantages for improving accuracy and target acquisition speed. What are Red Dot Sights? Red dot sights are non-magnifying optics that provide a simple and intuitive aiming solution for firearms. A red dot sight’s design centers around a reflective spherical mirror and a solid-state light-emitting diode (LED) emitter inside the housing. This LED, through an aperture, produces a beam of light—usually red—onto a specially coated lens. The lens is coated with a partially reflective material that reflects the LED light in the form of a red dot back toward the shooter’s eye. This red dot, called a reticle, is the aimpoint. The shooter superimposes the red dot on the target. Given the right range, conditions, and training, the bullet will hit the target after the trigger is pulled. What are Iron Sights? Traditional iron sights are basic aiming devices composed of metal components, typically built-in on firearms. Iron sights do not require batteries or external power sources. They usually consist of two main components: the front and rear sights. The front sight is a post or blade located near the end of the firearm’s muzzle. It can take different shapes such as a square post or a tapered blade. The top of the front sight is the point of focus for the shooter. The rear sight is positioned closer to the shooter’s eye. It consists of a notch or aperture through which the front sight is aligned. The rear sight may have a horizontal or vertical notch, or it can be a U-shaped aperture. When using iron sights, the shooter aligns the front sight with the rear sight. Proper alignment involves centering the front sight within the notch or aperture of the rear sight. The aligned sights, along with the target, form a “sight picture.” The shooter adjusts the alignment until the top of the front sight is level with the top of the rear sight and centered within the notch or aperture. The point where the top of the front sight aligns with the target represents the projected point of impact. For example, if the top of the front sight is aligned with the center of the target, the bullet should impact the target at that point. The decision between these two sight types largely hinges on individual needs and shooting styles. For individuals in high-pressure situations where speed is of the essence, a red dot sight could be more advantageous. For those who value reliability and tradition, iron sights may be more appealing. Pros and Cons of Red Dot Optics in Tactical Operations Using red dot optics in tactical operations has its benefits and drawbacks. Let’s discuss some of them: Pros of Red Dot Optics in Tactical Operations - Rapid Target Acquisition: Red dot optical sights are designed to allow shooters to aim quickly and intuitively. The reticle allows for faster sight alignment and faster target acquisition, which is crucial in dynamic and rapidly evolving tactical situations. - Both Eyes Open Shooting: With a red dot, the individual can shoot with both eyes open. This enhances his situational awareness of both the target and his surroundings in his peripheral vision. - Versatility Across Platforms: Red dot optics can be mounted on pistols, rifles, shotguns, and handguns. This versatility allows operators to use a consistent aiming system across different weapon systems. - Effective in Low-Light Conditions: Many red dot optics offer adjustable brightness settings, making them effective in low-light or nighttime operations. The illuminated reticle ensures visibility in challenging lighting environments. - Reduced Parallax Effect: Red dot optics are parallax-free. The point of impact remains consistent regardless of the shooter’s eye position. - Integration with Night Vision Devices: Some red dot optics are compatible with night vision devices, allowing operators to maintain accuracy during nighttime operations. - Straightforward Aiming: Operators are usually under a lot of stress in tactical operations. Red dot optics alleviate this by simplifying the aiming process, allowing the operator to simply aim and shoot. - Durable Construction: Many red dot optics are built to withstand harsh conditions, featuring rugged construction and shock-resistant designs. Cons of Red Dot Optics in Tactical Operations - Battery Dependency: Red dot optics rely on batteries to power the illuminated reticle. Battery failure can occur, which makes the red dot useless. - Limited Magnification: Traditional red dot optics provide 1x magnification, limiting their effectiveness at longer distances. For longer ranges, magnified optics are preferred. - Susceptibility to Environmental Conditions: Red dot optics with exposed lenses may be susceptible to environmental conditions like rain, snow, or dust. - Cost: High-quality red dot optics can be expensive, and their cost may be a consideration for budget-conscious agencies or operators. - Vulnerability to Impact: While durable, red dot optics can be vulnerable to impact or rough handling. Protective measures, such as lens covers or housing designs, can mitigate this risk. Pros and Cons of Iron Sights in Tactical Operations Iron sights offer reliability, simplicity, and cost-effectiveness in tactical operations. However, they may have limitations in terms of precision, target acquisition speed, and low-light performance when compared to modern optics. Pros of Iron Sights in Tactical Operations - Reliability: Iron sights are mechanical and do not rely on batteries or electronics. They are always ready for use, eliminating concerns about power failure during critical moments. - Durability: Traditional iron sights are durable and can withstand harsh conditions, including extreme temperatures, rain, and dust. They are less prone to damage from impact or rough handling. - Cost-Effectiveness: Iron sights are free; they’re built into the firearm. Even if you purchase aftermarket iron sights and upgrades, you’ll save more money than when you purchase red dots. - Simple and Intuitive: Iron sights have a straightforward design that is easy to understand and use. They are intuitive for shooters. - Versatility: Iron sights are almost always incorporated in firearms such as rifles, shotguns, and handguns. - Low Profile: Iron sights have a low profile, which can be advantageous for maintaining a streamlined and unobstructed view, especially when using cover or in confined spaces. Cons of Iron Sights in Tactical Operations - Limited Precision: Iron sights may provide limited precision, especially at longer distances. Shooters may find it challenging to achieve the same level of accuracy as with magnified optics. - Slower Target Acquisition: In comparison to red dot optics, iron sights require a slightly longer time for target acquisition. - Dependence on Light Conditions: Iron sights can be less effective in low-light conditions or when visibility is compromised. The lack of illuminated reticles may hinder aiming in these scenarios. Fiber optic dots can somewhat alleviate this problem. - Difficulties for Those with Eyesight Problems: Shooters with eyesight problems may experience challenges with focusing on traditional iron sights. - Not Ideal for Close-Quarters Combat (CQC): In close-quarters combat scenarios, where rapid target acquisition is crucial, iron sights may be less efficient compared to red dot optics. - Lack of Built-In Range Finding: Iron sights lack built-in features for range estimation. Shooters must rely on external methods or memorization for distance calculations. - Challenges with Moving Targets: Engaging moving targets may be more challenging with iron sights, as they lack the quick target acquisition benefits provided by red dot optics. Can Red Dot Optics and Iron Sights Be Used Together? You can get the best of both worlds! Red dot optics and iron sights can be used together; in fact, this is a common setup on many firearms. This combination is often referred to as “co-witnessing.” Co-witnessing allows shooters to have the benefits of both systems, providing redundancy and flexibility in different shooting scenarios. There are two primary types of co-witnessing: - Lower 1/3 Co-Witness: In this configuration, the red dot sight’s reticle aligns with the top of the front sight post. This allows the shooter to see both the red dot and the iron sights in the lower portion of the optic’s field of view. The lower 1/3 co-witness is often preferred as it provides a more unobstructed view of the target through the optic. - Absolute Co-Witness: In an absolute co-witness setup, the red dot sight’s reticle aligns precisely with the top of the front sight post. This means that the iron sights and the red dot appear at the same height when looking through the optic. While this setup can be effective, some shooters find it can obscure the lower portion of the sight picture. Benefits of Co-Witnessing - Redundancy: If the red dot optic becomes damaged or malfunctions or if it runs out of battery, the shooter can quickly transition to using the iron sights without removing the optic. - Flexibility in Sight Options: Co-witnessing allows shooters to choose between the speed and ease of use provided by the red dot sight for close-quarters engagements and the precision of iron sights for longer-range shots. - Training Consistency: For shooters transitioning between different firearms with iron sights and those with red dot optics, co-witnessing provides a consistent sight picture. This can be beneficial for training and muscle memory. - Adaptability to Changing Conditions: Co-witnessing allows shooters to adapt quickly to changing conditions, such as shifts in lighting or the need for a faster or more precise aiming solution. How to Set Up Co-Witnessing - Mounting the Red Dot Optic: Properly mount the red dot sight on the firearm using a suitable mount. Ensure the mount is secure and aligned correctly. - Choosing the Co-Witness Height: Select either a lower 1/3 co-witness or an absolute co-witness height based on personal preference and shooting requirements. - Adjusting Iron Sights: If necessary, adjust the iron sights to co-witness with the red dot sight. This ensures that the point of impact aligns correctly with the point of aim. - Zeroing: Zero both the red dot sight and the iron sights to the desired point of impact. This ensures that the shooter can transition seamlessly between the two sighting systems. - Testing and Training: Conduct tests and training drills to ensure the co-witnessed setup functions as intended. Practice transitioning between the red dot sight and iron sights to build familiarity and proficiency. Tactical operations require a variety of options when it comes to sighting systems. Red dot optics and the iron sights bring down their own set of advantages and possible drawbacks. In some instances, you may find it beneficial to use both of them together, offering enhanced adaptability. Understand that the sight you choose can greatly influence your operational effectiveness. With proper and consistent training, you can use both sights to your advantage.

<urn:uuid:1fd4a3ed-c746-4571-8f66-434cac371a0e>

CC-MAIN-2024-10

https://texaswatchdog.org/red-dot-optics-vs-iron-sights-for-tactical-operations/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

A vet at Joii Pet Care has issued a reminder to dog owners on the risks posed by artificial grass during the heatwave. Dr Samantha Webster warned that artificial grass can burn pets’ paws as it can heat up quickly under the sun. She told The Sun: “One very common danger for cats and dogs alike in summer is hot surfaces, which can quickly result in sore and burnt paws. “To test the temperature of the surface they are likely to walk on, try holding the back of your hand against it for at least seven seconds – if it is too hot for your hand, it is too hot for your furry companions. “It is really important to note that if you have artificial grass in your garden, this will heat up very quickly if under direct sunlight and so should be treated with the same caution as with pavement.” She also explained that certain breeds are more at risk of developing sunstroke than others, such as flat-faced dogs. “Unlike humans who can sweat from just about anywhere on the body, dogs are only able to sweat through their paws. “To keep cool, they expel heat by panting but as temperatures begin to rise, it becomes harder for the dog to cool down by panting as they are drawing in warmer air than they are releasing. “Your dog is most at risk of sunstroke when exercising on hot days. If your dog is experiencing sunstroke, there are some clear tell-tale signs to look out for. “These include excessive panting, drooling, bright red gums, shaking and vomiting,” she added.

<urn:uuid:58343f43-5ccd-4ea8-8a4d-cfbf63605064>

CC-MAIN-2024-10

https://thecaninetimes.co.uk/vet-issues-warning-on-artificial-grass-dangers-to-dogs/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Something that many people don’t know about Abu Dhabi, the capital of the UAE, is that the city is actually comprised of several different islands. Located on the Arabian Gulf, some of the Emirate’s main attractions are located on these islands. Each is extremely different from the other, therefore it’s a great idea to find out what the Abu Dhabi islands have to offer in order to make the most of a visit to the city. For those who love history and archeology, Dalma Island is the perfect destination. The island, only 26 miles away for the coast of Abu Dhabi, is one of the oldest inhabited islands in the region. With easy access via ferry or even by catching a flight there, Dalma island is home to its own museum, the Dalma Museum. There’s evidence of life on the island dating back as far as 10,000 years, making it one of the most relevant historical sites in the UAE. Perhaps the most popular of all Abu Dhabi islands is the world-famous Yas Island. It can easily be accessed by car, which is great news for all who visit Abu Dhabi, as it holds some of the main attractions in the city. Yas Island is home to Ferrari World, Yas Viceroy Hotel and Yas Marina Circuit – places which any visitors coming to the capital simply must see. It’s hard to even notice that this is an Island, considering how massive it is. For all environmentalists out there, Bu Tinah Island is a place to hold close to the heart. The island is the first and largest UNESCO recognized reserve in the region. Bu Tinah Island is home to an endangered species of turtle, the Hawksbill turtle, the island is perhaps the most important in the entire capital. However small, Bu Tinah island has gained global relevance as a marine life sanctuary. Perhaps the most unique island in the capital, Sir Ban Yas Island can only be accessed by air or water. This man-made island is a wildlife reserve, where visitors can actually go on safari and see anything from ostriches to giraffes, with more than 13,000 animals living in its Arabian Wildlife Park. Visitors can plan day-trips to the island, where they can also enjoy water sports, archery and horse riding; or simply stay overnight at the Anantara Sir Ban Yas Island Resort. Seen from the Abu Dhabi Corniche, Al Lulu Island doesn’t have a form of transport to allow public access. However, anyone on a boat can get to the 1,050-acre manmade island. The island has become popular as people for years have speculated what is to come, with even a Disney Resort being rumored to be constructed on the island in the 1990s. Although there’s not much there now, people continue to anticipate what the breakwater to the city’s corniche will bring. KEEN TO EXPLORE THE WORLD? Connect with like-minded people on our premium trips curated by local insiders and with care for the world Since you are here, we would like to share our vision for the future of travel - and the direction Culture Trip is moving in. Culture Trip launched in 2011 with a simple yet passionate mission: to inspire people to go beyond their boundaries and experience what makes a place, its people and its culture special and meaningful — and this is still in our DNA today. We are proud that, for more than a decade, millions like you have trusted our award-winning recommendations by people who deeply understand what makes certain places and communities so special. Increasingly we believe the world needs more meaningful, real-life connections between curious travellers keen to explore the world in a more responsible way. That is why we have intensively curated a collection of premium small-group trips as an invitation to meet and connect with new, like-minded people for once-in-a-lifetime experiences in three categories: Culture Trips, Rail Trips and Private Trips. Our Trips are suitable for both solo travelers, couples and friends who want to explore the world together. Culture Trips are deeply immersive 5 to 16 days itineraries, that combine authentic local experiences, exciting activities and 4-5* accommodation to look forward to at the end of each day. Our Rail Trips are our most planet-friendly itineraries that invite you to take the scenic route, relax whilst getting under the skin of a destination. Our Private Trips are fully tailored itineraries, curated by our Travel Experts specifically for you, your friends or your family. We know that many of you worry about the environmental impact of travel and are looking for ways of expanding horizons in ways that do minimal harm - and may even bring benefits. We are committed to go as far as possible in curating our trips with care for the planet. That is why all of our trips are flightless in destination, fully carbon offset - and we have ambitious plans to be net zero in the very near future.

<urn:uuid:b236a5a9-58fd-475a-8bb3-3aaa1bad73e0>

CC-MAIN-2024-10

https://theculturetrip.com/middle-east/united-arab-emirates/articles/a-guide-to-abu-dhabis-best-islands

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Dec 26th, 2009 – Gold Trends How did your Dad pay his college tuition with a part-time summer job? Why does it take two breadwinners to support a family these days? What with all the recent fuss about gold? The answer to these seemingly unrelated questions have a common answer. Cause and Effect Governments have a curious tendency to run deficits; and when they do, they have two options. 1) Decrease disbursements This usually takes the form of spending cuts. Public servants are laid off, social programs lose funding and government bureaucracies are consolidated. Politicians typically consider spending cuts a last resort and have a dubious record of fiscal discipline in this regard. 2) Increase receipts This usually takes the form of tax hikes and loans from foreign creditors. Politicians frown upon this option as well, especially during an election year. There is also third, sneakier option that you may not hear about on the campaign trail or in state-of-the-union address. 3) Monetize the difference This simply means governments fire up the printing press and create enough cash to cover the budget deficit. No cuts, no taxes. Needless to say, politicians love this option and have abused it for decades. So what is the effect of money creation? “By a continuing process of inflation, governments can confiscate secretly and unobserved an important part of the wealth of their citizens.” -John Maynard Keynes There are three things guaranteed in nations with fiat currencies: death, taxes, and inflation. Inflation is, by definition, expansion of the money supply. As the newly printed money circulates in the economy, the value of the old money is diluted. In other words, as freshly created dollars – conjured up by elected officials to balance the budget- filters into the money supply, it steals value from pre-existing dollars. That means every dollar printed by the government appropriates purchasing power from every dollar in existence. From cash in your wallet to money in your bank account and dollars held by foreign creditors, all money in the system is indiscriminately deprived of value. Think of inflation as a hidden tax or a trade-off. When governments create money to engage in aggressive foreign policy, enact socialized health care and slash taxes, citizens pay in the form of inflation. Most of us, however, are oblivious to the root cause of inflation and tend to ignore its devastating effects. The by-product of all this excess money in circulation is higher prices. As money loses purchasing power it takes more cash to buy things. Food, rent, gas, tuition, movie tickets and anything else denominated in dollars becomes more expensive. Even wages and salaries increase, but not at the rate of consumer goods. As a result, a larger portion of our income is allocated towards basic expenses like groceries and mortgage payments and less money is available for discretionary spending. Inflation gives us the illusion of wealth. Our stocks, houses and wages may be appreciating from a nominal standpoint, but relatively speaking, we are become poorer. This explains why even though we are being paid more, our standard of living is plummeting. Mom and Dad have to work full time to make ends meet. Summer earnings become insufficient to cover tuition and students are forced to take out massive student loans. The benefactors are the politicians who get their hands on the hot-off-the-press cash while it still has full value. By the time the new money gains velocity and consumer prices rise sharply they are long out of office collecting their pension checks. This vicious cycle has perpetuated itself for decades and is reaching a tipping point in many countries. The United States in particular has raised the stakes with bailouts, stimulus packages and promises to insure virtually every American mortgage and bank account. Of course, tax hikes and spending cuts are not funding these bold initiatives; the monopoly-money maker at the Fed is. Unless the fundamental laws of economics are magically repelled, inflationary pressures will ultimately engulf deflationary ones. Unfortunately, no nation is immune from the cause and effect nature of economics. Governments who venture away from the principals of sound money and create grotesque amounts of unbacked cash are locking their currency into a long-term downward trajectory. Hyper inflation has many precedents in modern society and has crippled a myriad of robust economies. Gold is a dynamic metal. Aside from being industrially useful, gold has a variety of attributes that naturally lend itself as a medium of exchange. Gold is easily divisible, fungible, has a superb value to weight ratio and never decays or rusts. It is rare, difficult to mine, nearly impossible to counterfeit, and has a magnificent track record of holding its value. In fact, according to Jeff Clark at Casey Research, in 1935, when an ounce of gold was worth $35, you could buy: • a top-quality tailored suit for $19.75 – or 0.56 ounces of gold • a family car for $500 – or 14.3 ounces of gold • a house for $7,150 – or 204.2 ounces of gold Today, with an ounce of gold worth north of $1000 an ounce: • that same top-quality, tailored suit costs $600 – or 0.56 ounces of gold • the family car now costs $15,000 – or 14.2 ounces of gold • the house averages $181,100* – or 204.6 ounces of gold* • *average house price from 2008 / gold at 2008 price of $880/ounce If your grandfather locked $7,000 USD – the approximate value of an early 20th century home- in a vault when he was young, the state-run printing press would relentlessly dilute the purchasing power of his saved money. 75 years later, you would be hard-pressed to find a decent used car for the same amount. Conversely, if he instead purchased 200 one-ounce gold coins with his $7000 in cash and locked it in the same vault, his hard earned wealth would be remarkably preserved. With proceeds from your grandfathers gold coins you could buy an average American house, just like he could have back in 1935. Today, gold’s inverse relationship with the USD continues. As money creation continues to destroy the value of USD’s, gold casually mirrors the decline. In essence, the fuss about gold is really just a reaction to drastic government spending programs. Implications, Considerations and Recommendations The prospects of gold look increasingly bullish. • Gold as a hedge against inflation is becoming more mainstream. It is only a matter of time before inflation rears its ugly head. • Central banks are expected to be net buyers of gold in 2010 for the first time in decades. • Gold production is in a state of perpetual decline. Old mines are closing at alarming rate while capital for new mines has dried up. New deposits are being reported less frequently and at lower grades. • China is allowing and even encouraging its citizens to buy physical gold. • Ben Bernake occasionally refers to his mystical exit strategy yet refuses to budge interest rates. All sign point to more stimulus, more bailouts and more government spending. This all adds up to gold turning the corner in 2010 and cementing its bull-market status. In the context of recent events, any day trader will tell you that unprecedented interventionism by world leaders has spelled unprecedented volatility in stocks and commodities. From a macro-economic standpoint, we expect this trend to continue for the foreseeable future. Technical analysis and experienced advice is vital to playing today’s gold market profitably. Opportunities are everywhere. As gold continues to march higher at the expense of the USD, there are many ways to profit. Purchasing physical gold bullion, gold ETFs and gold funds are a great way to insure your wealth against over-zealous elected officials. For even better returns, consider leveraged plays like gold producers and explorers. Regardless of the platform, it is highly recommended that you have a portion of your portfolio exposed to gold in these uncertain times. And if you want to pleasantly surprise your future grand kids, please, don’t bury stacks on 20’s in a time capsule. Free Trading Charts & Analysis to your inbox:

<urn:uuid:efa28fc1-50e3-4605-9cfb-fec9cedcabc5>

CC-MAIN-2024-10

https://thegoldandoilguy.com/gold_trends_newsletter/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Getting a mortgage is a key aim for so many people. The idea of owning your own home is a goal for the majority. For most it will be the biggest purchase they ever make. Understandably, lenders want to make sure you are reliable and will pay back the money you owe. How do you go about provinng this, and how can you increase your chances of being approved for a mortgage? Don’t expect to match with every lender. There are certain things you can do to increase your chances of being approved: Have a large deposit Borrow a smaller amount Have a regular salary (the higher the better) Have an excellent credit rating Have little to no debt However, if your performance in one of these areas isn’t great, look for a lender that will take this into account, or even look for a mortgage broker with a company like L&C so they can do the hard work for you. Check your credit report in advance. That way, you can work out if you need to pay off debt or make any other changes before a lender starts examining your file. The three credit reference agencies in the UK are Experian, Equifax and TransUnion – there are ways to check them for free nowadays. Ensure you are on the electoral roll. You can register here. Lenders use information from the electoral roll when doing identity checks, so it is crucial you have done this. Manage your credit carefully. You don’t want to be using lots of your available credit, as lenders will worry you are struggling to cope financially. However, you don’t want lots of credit available to you, as they will be concerned you will suddenly go on a spending spree. Close accounts that have been dormant for a while, but keep longstanding active accounts, as this is a sign of stability and is a positive.

<urn:uuid:5544789b-47b0-4fa2-ad47-4e3da2226ac5>

CC-MAIN-2024-10

https://themoneyraven.co.uk/2022/01/31/how-to-get-a-mortgage/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

As pet owners, we all know the importance of picking up after our furry friends. However, traditional plastic bags are not only harmful to the environment, but they can also take years to decompose. That's why more and more pet owners are turning to compostable dog poop bags as a more sustainable solution. What Are Compostable Dog Poop Bags? Compostable dog poop bags are biodegradable bags made from materials like cornstarch or plant-based materials. Unlike traditional plastic bags, these bags break down into organic matter in a matter of months, rather than years. This makes them a much more eco-friendly option for pet owners. Why Should You Switch to Compostable Dog Poop Bags? There are several compelling reasons to switch to compostable dog poop bags. Firstly, traditional plastic bags are incredibly harmful to the environment. They can take hundreds of years to decompose, and in that time, they release harmful chemicals into the soil and water. Compostable dog poop bags, on the other hand, break down quickly and safely, leaving no lasting impact on the environment. How to Choose the Right Compostable Dog Poop Bags Finding genuinely compostable dog waste bags can be a challenge, as many brands misleadingly claim that their non-sustainable products are eco-friendly. For instance, EPI-enhanced plastic bags may break down quickly, but they still result in microplastics that harm the environment. We do not consider EPI additives to be environmentally friendly in any way. The simplest way to identify truly eco-friendly poop bags is to look for official certifications from well-respected international organizations such as Tuv Austria and BPI. An example of such a certified product is the Pawtopia poop bag, as shown in the images below. The Best Compostable Dog Poop Bags on the Market There are many different brands of compostable dog poop bags on the market, and here, we will discuss Pawtopia 100% certified home compostable pet waste bags. What are Pawtopia Compostable Dog Poop Bags? Pawtopia Compostable Dog Poop Bags are a line of eco-friendly bags designed to provide a safe, sustainable solution for pet waste disposal. Made from 100% biodegradable materials, these bags decompose quickly and naturally, leaving no harmful residue in the environment. The bags are also compostable, meaning they can be broken down into nutrient-rich compost that can be used in gardens and farms. Benefits of Using Pawtopia Compostable Dog Poop Bags Eco-Friendly: Pawtopia Compostable Dog Poop Bags are made from biodegradable materials, meaning they break down quickly and naturally, reducing the amount of waste in landfills. Safe for the Environment: Traditional plastic bags can release toxic chemicals into the environment, damaging wildlife and ecosystems. Pawtopia Compostable Dog Poop Bags are free from harmful chemicals, making them a safe choice for the environment. Premium Quality: Pawtopia dog poop bags are extra-thick (20 microns). Designed to be 100% leak-proof, the solid construction of our bags locks the odor away (odor proof), even while on the go. With Pawtopia, your walks will be pleasant without any unexpected, nasty surprises. Easy-to separate, easy-to-open: Nothing is worse than getting stuck with separating and opening the dog poop bags when you need them. Our biodegradable dog poop bags separate easily and open swiftly when the time comes. Giving back for rescue animals: At Pawtopia, we believe in giving back to the animal community, especially those in need of rescue. That's why a portion of our profits are dedicated to supporting rescue organizations. Additionally, we are passionate about raising awareness and promoting the adoption of rescue animals. By actively participating in events and initiatives, we strive to make a positive impact on the lives of these furry friends. Join us in our mission to support rescue animals and give them a second chance at a loving home Compostable dog poop bags are the ultimate green solution for pet owners. They are much better for the environment than traditional plastic bags, and they are also much more convenient to use. With Pawtopia Compostable Dog Poop Bags, we can now dispose of pet waste in a safe, sustainable manner. These eco-friendly bags are made from biodegradable materials, decompose quickly, and can even be turned into nutrient-rich compost. Whether you're an environmentally conscious pet owner or just looking for a high quality solution for pet waste disposal, Pawtopia Compostable Dog Poop Bags are the ultimate green solution. So, why not make the switch today and do your part to protect the environment? Are compostable dog poop bags really better for the environment than plastic bags? - Yes, compostable dog poop bags are much better for the environment than plastic bags. They break down quickly and without toxins, leaving no negative impact on the environment. How quickly do compostable dog poop bags break down? - It depends on the environment but compostable dog poop bags typically start to break down within a few months, compared to traditional plastic bags that can take hundreds of years to decompose.

<urn:uuid:a01d9aa5-b6c6-4ef8-af34-e769e6809e3b>

CC-MAIN-2024-10

https://thepawtopia.com/blogs/stories-1/pawtopia-compostable-dog-poop-bags-the-ultimate-green-solution

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Recently, I was travelling my usual route to work passing through a small village in Northamptonshire. Just before leaving the village I saw a father and son standing on the pavement, with the father with his arm around his son’s shoulders. I was initially struck by the unusualness of the situation and also thought how good it was to see a father bonding with his son with an open display of affection. As I drove past I noticed two things – one the happy smile on the father’s face, second the look of horror and disdain on the son’s face. The latter, I am sure, was connected with the fact that surrounding these two was a group of lively young people waiting for a bus. This momentary observation then led me to think what reaction this boy was likely to receive from his peers when he arrived at school. It also reminded me of when I was studying for my ‘A’ levels in Middlesbrough and how I used to tell my Mum to park the Volvo a half a mile away to avoid my embarrassment. I may have easily misread the situation and perhaps the young man was merely mad because he had let his cereal go soggy – who knows? The day that I saw the pair was the day that commentators were discussing two reports one from the Youth Justice Board1 and one from the Institute of Public Policy Research2. In reading the summaries of both reports I as struck by the fact that perhaps our whole approach to young people is wrong – we are too quick to blame and castigate every person between the ages of thirteen and twenty-one as a delinquent, blaming them for the type of clothing they wear or the amount they drink. This approach ignores the fact that we have all been young once and we have all done things that we may regret, and yet the vast majority of us grow up to be fine. Children, at times, may make mistakes and will have to learn by their mistakes, but part of the role of being a parent is not merely to punish; we also need to help children make sense of the world and help them make appropriate decisions. Although this may sound like middle class dribble, the report from the Youth Justice Board (2006) clearly shows that the majority of the study sample “…tended to be from a highly disadvantaged group, characterised by: - family breakdown and inconsistent supervision or boundary setting from carers - educational difficulty and under-achievement - previous abuse, bereavement and loss - residence in high-crime neighbourhoods, with relatively few age-appropriate facilities” I continue to fail to see how slapping an ASBO on somebody without addressing some of the underlying issues is going to sort anything out. In talking about this issue with a group of students, one student challenged my assumptions and said I was not one of the people living in a community dominated by anti-social behaviour. I had to agree but then pointed out that merely bringing more and more people into the juvenile justice system was not an answer as it simply criminalised behaviour and did not, to coin a phrase, get at the “causes of crime”. The recently published IPPR report states, “Until now, analysis has largely failed to grasp how the experience of youth in Britain has changed and why this has fuelled public disquiet”. In their analysis the authors present an interesting finding “…that British children spend more time in the company of peers, and less time with adults and parents, than young people in culturally similar countries”. The report is careful not to criticise lone parents and goes onto emphasise traditional policies as a solution with increased investment in child care and parenting classes. Although these policies may in part work, I am beginning to feel that it is yet another political idea to be imposed from above. What is interesting about the report on the ASBOS is that the most young people interviewed appear to accept that they need to be “dealt with”; it is just the use of the ASBO that is the problem. It seems to be using a sledge hammer to crack a nut. I remember in the early 1980s reading Jimmy Boyle’s autobiography A Sense of Freedom about his life of violence and crime which extended into prison where, to use his words, he was “…animalised after seven year of solitary confinement”, until he was moved to the Barlinnie Special Unit, where he discovered art. In that Unit he was treated differently, was being treated as a human being and using art which “… was like a creative damn bursting inside me. In that one moment I had crossed over a threshold”.3 Although this is perhaps a rather dramatic analogy, it makes the point that merely punishing a person is not necessarily going to achieve anything. They need to be involved and helped to take control of their life. In my view we need to go back to what the Government says it wants to do which is for communities to find solutions for their own problems. In order to find these solutions we need to talk to the very people causing the problems and involve them in the process of finding solutions. Adopting a community-based outreach model may be one of the solutions, alongside other initiatives like parenting classes. Using ASBOS as a solution for the problems of our young people is not the answer; it simply criminalises behaviour and to borrow one of Jimmy Boyle’s words ‘animalises’ people which will leave us with a legacy of disenfranchised adults who, in turn, have difficulties in relating to their children. 1 Youth Justice Board (2006) Anti-Social Behaviour Orders 2 Julia Margo and Mike Dixon with Nick Pearce and Howard Reed (2006) Freedom’s Orphans: Raising youth in a changing world Institute of Public Policy Research 3 See: Community Arts

<urn:uuid:3cf9c0c4-0b10-4f3e-a7d4-f34a333178db>

CC-MAIN-2024-10

https://thetcj.org/social-work/asbos-and-animalisation

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Paris is arguably one of the world’s centers for seeing art and culture. I have visited Paris over a dozen times and during each visit, I still find hidden treasures inside the museums throughout the city. The museums range from displays of classic artists and their work, as well as writers, geology, architecture, fashion and much more. Check out a list of some of my favorite museums in Paris. 10. Musee Marmottan Monet Housed in a former hunting lodge contains the largest collection of Claude Monet’s work in the world. The museum also includes works by other famous impressionists of the time Degas, Renoir and Manet. The museum is on the outskirts of the city center so it is rarely crowded. 9. Musee Rodin This museum is a charming space dedicated to sculptor Auguste Rodin. It is housed in an 18th-century mansion called Hotel Biron that the artist used as a workspace and exhibition venue until he donated it to the city of Paris with the stipulation that it be used as a museum of his works of art. The gardens around the museum contain several of his most important works and are a must see. The museum is home to the majority of Rodin’s significant works are located on site including famed statues The Thinker and The Kiss. 8. Musee de L’Orangerie The Musee de L’Orangerie is a renowned art gallery filled with impressionist and post-impressionist paintings including the famous Water Lilies painting by Claude Monet. The museum is situated in the west corner of the Tuileries Gardens. 7. Maison de Victor Hugo This small museum honors literary giant Victor Hugo. Hugo is one of the romantic movement’s most famous writers. He is best known for Les Miserables and The Hunchback of Notre Dame. He lived in the house where the museum is located for 16 years from 1832-1848. It is a unique view of the living quarter and art collection of the writer. 6. Pompidou Center- National Museum of Modern Art The Pompidou is a unique piece of architecture inside and out. It looks like a building that has been turned inside out. Inside the building houses the National Museum of Modern Art, which is the largest museum for contemporary art in Europe. The Pompidou is the only museum in the world to offer a comprehensive view of modernism from the 20th and 21st centuries. The museum is also home to many traveling exhibits that usually include unique photography exhibitions. 5. Louis Vuitton Foundation Frank Gehry designed space to display art and culture. The $143 million museum in Paris was opened in October 2014. The museum was funded by LVMH and bears the name of its flagship brand, Louis Vuitton. The building will pass into the hands of the city’s government after 55 years. Temporary exhibits that highlight modern and contemporary art are open to the public throughout the year. The combination of works shown includes art owned by LVMH such as works by Jean-Michel Basquiat and a few other artists. The foundation commissioned works by Ellsworth Kelly, Olafur Eliasson, Janet Cardiff and George Bures Miller 4. French Museum of Natural History The French Museum of Natural History was founded in 1793 during the French Revolution but was established earlier in 1635 by King Louis XIII. It combines three museums into one, including a four-story taxonomy wing, a building of skeletons and fossils and a separate structure devoted entirely to geology. There’s also a zoo nearby! As of 2017, it has 14 sites throughout France, with four in Paris, including the original location at the royal botanical garden. The Louvre is one of the largest museums in the world and one of Paris’s most historic monuments. Over 10 million visitors attend each year to see the over 35000 paintings including the Mona Lisa and The Winged Victory of Samothrace. My favorite exhibits also include Napoleon III apartments that you can tour as well as the Department of Egyptian Antiquities of the Louvre of Paris, comprising over 50,000 pieces, includes artifacts from the Nile civilizations which date from 4,000 BC to the 4th century. Travel Tip: By tickets ahead to avoid long lines. Insert link 2. Musee Picasso Set in a 17th-century hotel the National Picasso museum houses over 5000 works of arts by Picasso. Works include drawings, paintings, sculptures, and ceramics from every period of his career. The museum also houses some of Picasso’s personal art collection with works by Degas, Seurat, and Matisse, as well as an extensive collection of African art, from which Picasso drew inspiration. 1. Musee d’Orsay Musee d’Orsay is a museum in Paris, France, on the Left Bank of the Seine. It is housed in the former Gare d’Orsay, a Beaux-Arts railway station built between 1898 and 1900. This is my favorite museum because of its vast collection of Impressionist artists including Monet, Manet, Van Gogh, Renoir and my personal favorite Edgar Degas. Degas produced amazing paintings of Ballerinas that are on display. Other famous items include Van Gogh’s Starry Night over the Rhone Aries and Renoir’s al au Moulin de la Galette, Montmartre.

<urn:uuid:0b6847f1-0792-44a2-b0d5-ed533afb8726>

CC-MAIN-2024-10

https://thetraveladdict.com/continents/europe/top-10-museums-in-paris/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

God’s word is the source, foundation and basis of prevailing supernatural power in our lives, families, and ministries. It is food and nourishment: food for our spirit, soul and body, and nourishment for our mind, thoughts and strength. It supplies health, joy and happiness, and brings assurance and faith through which we possess all we need. Through this word, we have holiness without which no man shall see the Lord, and it grants us wisdom, power for living and strength for our journey towards heaven. God’s word is food – milk and meat, which we must take regularly to be strong, powerful and unconquerable. We must: 2. Chew it to benefit from all the nutrients; crush it, analyze it, apply it, break it down and compare it with your life. 3. Masticate, that is, ponder on it, meditate on it and make it personal. 4. Swallow it, let it sink it into your heart, brain, mind, and consciousness, because it is beneficial to your spiritual health. 5. Take breakfast every day when you are not fasting. Start your day with the word of God. 6. Keep to balanced diet of the word and the doctrines of Christ – salvation, justification, holiness, healing, deliverance, etc. Feed on all the word and different part of the word of God. 7. Exercise: use the strength you gained through the word to – (i) Evangelize sinners (ii) Empty Self out of your system (iii) Encounter situations (iv) Endure Challenges (v) Edify Saints (vi) Evict, expel and eject strangers/squatters – sickness and polluters – and close the door (vii) Exemplify and exhibit Strength. The word you are hearing today will make you strong and free in Jesus Name. To prevail and be more than a conqueror, we need the ministry and the message that the word bring. Desire it and drink it. Before you can have that desire and drink properly, there is something to empty out of your life and purge out from your system, You lay aside all these and today, the Lord will cleanse, wash and purge everyone in Jesus Name. If this milk of the word is to do us good, we must: 1. Desire and not despise it 2. Drink it and not just display it 3. Decide (to be a doer of the Word) don’t deceive yourselves. 4. Do it and don’t delay 5. Demonstrate it and don’t dodge it 6. Declare it and don’t decline it 7. Defend it and don’t dilute it (earnestly contend for the faith) As you take in the word, you will grow in: (1) Grace; (2) Faith – all things are possible to him who believes; (3) Conviction – you take your stand where others compromise; (4) Courage – no intimidation; (5) Strength – higher today than yesterday; (6) Victory; (7) Breakthroughs – in all areas of your life in Jesus name. As you are going back home today, and as you take the strong meat of the word, you will be strong and no enemy will conquer you anymore. You will be a conquering and victorious warrior. Power and anointing that breaks every yokes will come upon your life and you will not be running here and there for help. Strong meat is the spiritual diet of men and women like Enoch, Abraham, Moses, Elijah, Daniel (no lion in Babylon was able to touch him), Shadrach, Meshach and Abednego (Nebuchadnezzar was looking for their ashes but he saw the Son of God in the fire with them), Ruth (who made up her mind to follow Naomi despite her condition as a young widow, and she got the greatest husband in the land in Boaz, and children!), Apostle Peter (in prison, an angel came and his chains were loosed and he was led out. Nothing can tie you down in Jesus name), Paul and Silas in the prison did not wallow in self-pity but prayed and sang and the foundations of the prison were shaken and their chains fell off. Pray, sing and clap anywhere, all the chains will fall off. Stephen, Philip, Aquila and Priscilla, Mary, all had victory in their lives, and we can tell they had been taking the strong meat of the word of God. Follow their example and your faith, power and courage will grow. Moses though ready to, never suffered but rather God used him as a mighty instrument in His hand. When you are taking strong meat, you will refuse and reject any gift from Satan, idol worshippers, worldly and carnal people. Sometimes sickness may come as a test of your faith; pray that you will pass the test. Those taking strong meat never give up easily to their problems and challenges; they persevere in prayers. You will persevere and prevail in your challenges and sickness, and healing will come in Jesus Name. Feeding on strong meat makes you strong in faith, in the spirit, for spiritual warfare, on the battlefield, for exploits, in prevailing prayer and over all your enemies. Living only on milk will weaken warriors on the battle field. Improve on your spiritual diet and the same power in Enoch, the same confidence in Peter, and that consecration of Paul will be in your life in Jesus Name. We are more than conquerors. Heavenly protection is upon your life and the wall of fire around you in Jesus Name. These are the people that are feeding on strong meat The manna from heaven is referred to as Angel’s food, and all the dietary needs of the children of Israel were met with in the wilderness. The men, women, children, families, and all the tribes took the same manna. They were healthy, strengthened, fit and free, vigorous and victorious, had 20/20 vision, sharp and clear sight. I pray that all the dimness of sight will vanish and this heavenly manna will make you fit in Jesus Name. They were safe and sound; fine and fresh, whole, hale and hearty. Feed on the Word of God and all your needs shall be supplied. There shall be no feeble person in all our congregations: You are delivered, healed, strengthened, energized, more than conquerors, overcomers, prospered and all the needs of your life are supplied in Jesus Name . It is your day! Ponder on this! Feeding on strong meat makes you strong in faith, in the spirit, for spiritual warfare, on the battlefield, for exploits, in prevailing prayer and over all your enemies. Living only on milk will weaken warriors on the battlefield. Improve on your spiritual diet. Take the sincere milk and that strong meat as well. Reflections – God’s word is the source, foundation and basis of prevailing, supernatural power in our lives, families, and ministries.

<urn:uuid:2f1475d6-688d-42d8-a4b9-deffad192663>

CC-MAIN-2024-10

https://timelygospelpro.org.ng/prevailing-power-through-the-ministry-of-the-word-pastor-w-f-kumuyi-2/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Great idea if it works. I like to look at my food before I pay for it , so this may be an issue. Tonnes of food that would have gone in the trash is instead is ending up on plates thanks to an app developed by a Canadian company. What does anyone think of 90 kmh collector lanes and 100 kmh express lanes through (at least) Toronto? Transfers could be 95kmh. , this could reduce crashes at the transfer points. I knew racing was stunt driving, but intentionally slowing down on a tailgater (who by definition is also stunt driving?) HTA, “Stunt” driving can mean: - Burn outs, drifting, or donuts. - Popping wheelies or doing stoppies on a motorcycle (or car if possible). - Occupying a passing line for longer than is reasonably required to overtake. - Driving with a person in the trunk of motor vehicle , or driving while not in the driver’s seat. - Exceeding 50km/h of the speed limit (the most commonly known, and the most commonly charged offence). - Driving without due care and consideration of others on the road, or in a way that might endanger someone by: intentionally preventing another person from passing, stopping, cutting someone off, or slowing down. - Driving as close as possible to another vehicle, person, or cyclist. - Jumping ahead and turning left before traffic commences through an intersection. I see many vehicles pulled over for over 50, but rarely for any other of the above list. Most hate the annoying amber alerts – is this the response they want people to take? I generally like Christie , but she completely glosses over Maxime. The commenters don’t forgive her.

<urn:uuid:1d487de1-8720-4c9c-83c7-dba518bc982d>

CC-MAIN-2024-10

https://timsbitz.com/2019/10/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Y Diabetes, a diabetes awareness movement was launched on 5 November 2016 at Suntec Singapore Convention & Exhibition Centre by Minister of State for Communication & Information and Health, Mr Chee Hong Tat, in commemoration of World Diabetes Day which falls on 14 November 2016. Powered by youths, and co-organised by Tan Tock Seng Hospital (TTSH) and TOUCH Community Services (TOUCH) for the very first timeY Diabetes aims to bring about greater awareness of diabetes (both Type 1 and 2), its impact on lives and how everyone can play a part to support the diabetes community. Said Executive Director of TOUCH, Mr James Tan, “It is estimated that by 2030, over 600,000 people will be living with diabetes in Singapore. It is also projected that 34% of those aged 24-45 this year can expect to have diabetes by the time they are 65. That is why it is important for young people to understand more about diabetes early, and we hope to help achieve that through Y Diabetes.” Y Diabetes saw some 700 youth volunteers aged 18 to 35 walk the streets to spread the word on diabetes awareness to members of the public. The youth volunteers come from all walks of life, representing TOUCH, TTSH, other hospitals, institutions and pharmaceutical companies. Each youth volunteer approached 10 members of the public to spread diabetes awareness using a special weblink with an ultimate goal to inspire them to become diabetes advocates. The weblink which was conceptualised by TOUCH Diabetes Support, a service of TOUCH, and TTSH, contains information such as the types of diabetes, symptoms of diabetes, how people can show support to people living with diabetes, and useful links and helplines. Through this mobilisation campaign, Y Diabetes aims to reach out to some 100,000 youths in Singapore by the end of November.

<urn:uuid:1233961d-31f0-4e8a-872b-dc33cb31e995>

CC-MAIN-2024-10

https://touch.org.sg/about-touch/stories/details/2017/04/17/y-diabetes-a-diabetes-awareness-movement-by-youths-for-youths

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Brain Injured Mice Offer Insight on Traumatic Brain Injuries and CTE A new study published in the Journal of Neurotrauma may offer insight into the behavioral changes and problems caused by repeated brain injuries, as well as offering a model for new methods of preventing and identifying the neurodegenerative disorder chronic traumatic encephalopthy. The research used mice to show that mild repetitive traumatic brain injury creates many of the same behavioral problems associated with CTE in humans, including difficulty sleeping, depression, judgement, and risk-taking issues. Currently, no model exists for chronic traumatic encephalopathy, but the new animal study could potentially provide an important early-stage tool for understanding the condition and focusing research for future treatments. “This new model captures both the clinical aspects of repetitive mild TBI and CTE,” said Anthony L. Petraglia, M.D., a neurosurgeon with the University of Rochester School of Medicine and Dentistry and lead author of the study. “While public awareness of the long-term health risk of blows to the head is growing rapidly, our ability to scientifically study the fundamental neurological impact of mild brain injuries has lagged.” Repeated traumatic brain injuries are widely believed to be a cause for the permanent brain disease CTE, as well as long-term neurological impairment in less extreme cases. Sometimes, people undergo dental pain due to injuries in the brain. If you’re looking for getting dental crowns and other services from dentists, you can check them out here! The study stimulated the type of TBI that tends to occur in sports or from other hits to the head in mice, who were then evaluated in a series of tasks designed to measure behavior. The tests included measurements of spatial and learning memory, anxiety and risk-taking behavior, sleep disturbances, and electrical activity in the brain. The mice with repetitive mild TBI did poorly in every test, and their poor performance persisted over time. “These results resemble the spectrum of neuro-behavioral problems that have been reported and observed in individuals who have sustained multiple mild TBI and those who were subsequently diagnosed with CTE, including behaviors such as poor judgment, risk taking, and depression,” said Petraglia. “Undoubtedly further work is needed,” concluded Petraglia. “However, this study serves as a good starting point and it is hoped that with continued investigation this novel model will allow for a controlled, mechanistic analysis of repetitive mild TBI and CTE in the future, because it is the first to encapsulate the spectrum of this human phenomenon.”

<urn:uuid:18f0c0bd-62fd-48e7-8614-a42381b5de83>

CC-MAIN-2024-10

https://traumaticbraininjury.net/2014/04/30/brain-injured-mice-offer-insight-on-traumatic-brain-injuries-and-cte/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Oral health care is the method of retaining tooth free and clean from infection and other dental issues by each day flossing and extensive clean-up of the tooth. It is additionally vital that good oral cleanliness is completed every day in order to avoid smelly breath and additional tooth problems. Listed here are indications of by mouth conditions that require dentist’s interest. Tooth understanding or ache: It is a hint that this anxious feelings supplying flavour, aroma and style are impaired somewhat. A painless teeth extraction or perhaps abscess structure in the pulp-stage implies serious problems with the lack of feeling. It may be better to experience a childrens dentist who will identify the problem if it may be happening for some time. Should it be a result of a matter, a child fluid warmers dental practitioner can achieve a neural-ectomy and help save the teeth. Tooth loss or deferred growth, normally, dental offices suggest painkillers for verbal ache but: Research shows that kids that are under the age of more effective several weeks are actually recognized to shed their 1st enamel around two years. It’s now been linked to dental diseases including neural problems, coronary disease, oral and weakening of bones decompose. A dentist can spot the condition and handle it if this describes observed earlier. Currently, most tooth decay is because fluoride, which may be taken from the tooth by way of fluoride remedy. Poor personal hygiene causes teeth and teeth cavities ailment: Common bacteria tend to be found everywhere in the jaws. They see microorganisms, plaque buildup and sweets that gather amongst tooth, inside of the gum line plus wallets and creases between the pearly white’s. Most verbal infections come from dental plaque buildup that build up in between the teeth, inside the facial lines along with pouches. There are several different types of by mouth illnesses, and the most frequent types are tooth, gingivitis and periodontitis caries. The dental office can establish these and provide remedies. The American Dental Assoc . proposes which every grown-up have standard dentistry that may be carried out a minimum of annually. This can include the two your examinations and fluoride remedies. Many declares, for instance Illinois, have dental programs which include schedule dental hygiene as part of their Medicaid plan. This is a great solution for very low-cash flow people. Kids might get tooth decay, very. Teething can be another difficulty that could impact children’s pearly whites. The fact is, teething children won’t need to have dentistry until eventually they’re with the 6th yr of everyday living. He or she may benefit from early preventative dental hygiene, in particular if there is a medical history of cavities in the family, if a child’s gum line are regularly annoyed. Mothers and fathers also need to be certain their kids collect every year flu virus photos. In case you can’t afford dental treatment, nearly everyone is embracing acquiring medigap insurance policies through talk about-borrowed oral health initiatives. The state of illinois is but one condition which has a entire style website cms-416 dental health step. Locals can pick a program that has every one of the significant families of coverage, like annual dental outings. The shape content management systems-416 offers methods of people and people out there. Some insurance providers have formulated strategies that is ordered confidentially. The state of illinois residents can find a personal strategy which provides some, but each your options covered by the sort Website cms-416. There is no doubt that good brushing and flossing are nevertheless critical. No person need to pay no attention to the importance of these responsibilities. Most people took it for the excessive and they are totally neglecting these chores, vehicles really should still be completed. For all those with bad the teeth, it may be time to look at excellent wellness project that may give additional safeguard, in addition to a several protection actions. In the event you loved this post and you want to receive more info with regards to Zahnarzt in Ungarn generously visit our internet site. Had you been thinking about the material for this write-up, below are a few much more web pages with similar content:

<urn:uuid:88188c46-ffa6-4bd4-a5da-556b9e0b1486>

CC-MAIN-2024-10

https://treasure68.com/15180-what-are-the-differences-between-annual-dental-care-lab-tests-protective-the-field-of-dentistry-35/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Your yard’s trees are a few of the things that make your home stand out amongst the others. Your home’s trees are unique and beautiful. They provide shade in the summertime and shelter. You enjoy spending time outdoors with your family and appreciate how much your trees do for you and your yard, but did you know that trees are prone to illness? That’s right! Your trees can catch tree bark diseases and infestations. If you don’t pay close enough attention to your trees, they can become ill to the point of complete decay. To save your trees and keep them safe for years to come, you should know how to identify tree diseases and bug infestations. Knowing the signs is the first step. Once you’re able to identify a problem, you can then correct it. Here’s what you need to know! There are several different types of diseases that trees can catch. These diseases can be transferred from one tree to another by animals, insects, and other things as well. Know how to identify some of the popular tree diseases to help keep your tree healthy. 1. Bark’s Peeling It’s not uncommon for small sections of your tree’s bark to peel off every now and then. This is a normal part of your tree’s life, however, if you notice large pieces or sections of bark peeling off, then it’s time to worry. Your tree’s bark is what protects the core of the tree. It keeps your tree healthy by helping it maintain all of its necessary nutrients. When the bark begins to fall off, your tree is now losing its protection and nutrients. 2. Mildew Growth Mildew growth on your tree is a sure sign of an unhealthy environment. If you notice a whiteish, powdery mold on your tree’s leaves, then this is a sign of disease that shouldn’t be taken lightly. When the weather brings high humidity levels, this type of mold is more common. Along with visible mold on your tree’s leaves, you can also expect your tree’s leaves to be distorted. A stunt in tree growth is also expected after finding this mold. Before the mold grows to cover the entire leaf, it starts out as small white spots. Catching the mold in its earliest stages is always best, so be on the lookout for those. 3. Grey Fungus Noticing grey fungus growths is a sign of Fomes Fomentarius. This fungus is grey in color and is hard to the touch. If you take a minute to look under the hoof-shaped fungus, you’ll find tiny white pores everywhere. Once you notice this fungus growing on your tree, you can expect it to continue growing until it’s completely removed. 4. Leaves with Spots Leaf rust looks as you would imagine it to: like rust spots on the leaves. All tree species are capable of developing leaf rust. The spots on the leaves are yellowish, orangish, with hints of brown or black. Leaf rust affects your tree because the leaves won’t be able to make food from the sun as they should. The end result is a weakened tree, which is then susceptible to other issues. 5. Seeping Fluids Trees create sap and sap can be found within your tree. It’s normal to notice tree sap here and there, but fluids seeping out of your tree is something to be worried about. Alcoholic slime flux is a tree disease that causes the tree to seep fluids. These fluids cause dark streaks to appear down your tree’s trunk. In worst cases, the tree will even begin to seep excessive amounts of fluids until there’s a pool around the base of the tree. Identifying Bug Infestations Unfortunately, diseases aren’t the only thing that can cause a tree bad health. Bug infestations are another worry that you have when it comes to protecting your tree. Here’s what you need to know. 1. Dry Foilage If a mite infestation is effecting your tree, then you’ll begin to see dry foliage. Mites live off of the juices inside trees and plants, and they’ll suck it dry. In return, the foilage on your tree will become dried out, curled, and dead. 2. Chewed Foilage If you notice that your tree’s foliage has been chewed, then this could be another sign of a bug infestation. There are several types of insects that love to nibble on leaves. Identifying the type of insect can be done by looking at the chew marks or how the leaves were eaten (left only the stem, made a few holes, and more). 3. Visible Holes Noticing visible holes in your tree’s trunks and branches could mean that there are insects eating through it. The larvae of wood-boring insects dig through tree bark. When the insect lays eggs inside your tree’s bark, the larvae will hatch and begin boring through your tree’s bark. When this happens, your tree is unable to get the water and nutrients it needs, causing large sections of bark to die. 4. White Masses White masses of a cotton-like substance are caused by several different types of small insects. These masses can be the egg sacks of the insects or the insects themselves. They feed off of the fluids found within plants and will cause the tree or sections of the tree to die. 5. Black Mold Some insects release a “honeydew” that rests on your tree or on your tree’s leaves. Mold can then begin to grow on this substance. If you notice black mold anywhere on your tree, then you might have a bug infestation. The black mold that you see is most likely growing on this substance left by the insects. Notice Any Tree Bark Diseases Yourself? Have you noticed any tree bark diseases on your tree? If so, it’s time to call in the professionals! Click here to contact us today and allow us to handle all of your tree’s issues!

<urn:uuid:82aa7811-b02b-4ce2-88f9-a9a3d79495ee>

CC-MAIN-2024-10

https://treeserviceaugustaga.com/how-to-identify-tree-diseases-and-bug-infestations/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Kefalonia is the largest of the Ionian Islands in western Greece, known for its stunning natural beauty, crystal-clear waters, and picturesque villages. The island is home to a variety of attractions, from beautiful beaches to impressive natural landmarks. One of the most famous attractions in Kefalonia is the Myrtos Beach, which is widely regarded as one of the most beautiful beaches in the world. With its crystal-clear waters and stunning cliffs, the beach is a must-visit for anyone traveling to Kefalonia. Another popular attraction is the Melissani Cave, which features an underground lake and stunning rock formations. Visitors can take a boat tour through the cave to experience its natural beauty up close. Kefalonia is also home to several picturesque villages, such as Fiscardo, Assos, and Sami. These villages offer visitors a chance to experience the local culture and way of life, as well as enjoy the traditional architecture and delicious cuisine. The island is also known for its delicious cuisine, which features local ingredients such as olive oil, feta cheese, and fresh seafood. Visitors can enjoy traditional dishes such as moussaka, pastitsada (a spicy beef or rooster stew), and kreatopita (a meat pie). Overall, Kefalonia is a beautiful and diverse island that offers visitors a chance to explore the stunning natural beauty and rich culture of Greece. Whether you're looking to relax on the beach, explore natural landmarks, or immerse yourself in local culture, Kefalonia has something to offer.

<urn:uuid:c594ae4b-76ad-439a-8ed7-bee7ac16e594>

CC-MAIN-2024-10

https://tripsingreece.com/location/ionian-islands/kefalonia/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

EDUCATIONAL DIRECTIONS OF BACHELOR’S DEGREE GET ACQUAINTED WITH YOUR Tashkent State University of Oriental Studies specializes in modern and classical Oriental languages and literature, textual and source studies, history, philosophy, culture, political science, international relations, economics, geography, tourism, guiding and translation activities, international journalism. AT LEAST ONE ORIENTAL AND ONE WESTERN LANGUAGE WILL BE TAUGHT COMPLETELY and this will ensure your initial advantage in the job market. LANGUAGES TAUGHT AT OUR UNIVERSITY: Oriental languages: Arabic, Persian, Dari, Pashto, Hindi, Urdu, Turkish, Uyghur, Chinese, Japanese, Korean, Indonesian, Malay, Vietnamese. Romance-Germanic languages: English, German, French. DESCRIPTION OF UNIVERSITY STUDIES AND FIELDS GRADUATES CAN WORK IN: TEACHING PHILOLOGY AND LANGUAGES In this field of study the language of the East (phonetics, morphology, normative grammar, stylistics, translation practice), literature, history, geography, ethnography are studied. Graduates teach Oriental and Western languages in pre-school, general, secondary special and vocational education, translate fictional and scientific literature, prepare bibliographic materials, write reviews, perform technical and other types of translation. They can work as managers and administrative staff in hotels and travel agencies; perform professional activities such as intensive teaching of studied Oriental and Western languages. TEACHING PHILOLOGY AND LANGUAGES (CLASSICAL LANGUAGES OF THE EAST) In this field of education, classical Uzbek, Arabic and Persian languages, past literary and cultural heritage created in these languages are studied from the point of view of source and textual literature, history of oriental literature, historical linguistics, history of written literary languages, language of ancient written manuscripts; text translation and interpretation; the principles of language and literature methodology, teaching skills, speech culture is taught. Graduates will be able to teach Oriental and Western languages in pre-school, general, secondary special education institutions, as well as subjects of their specialization, work as a junior researcher in social and humanitarian research organizations; can translate from Oriental and Western languages studied in public institutions and private non-governmental organizations, editors and proofreaders in manuscript collections, archives, information resource centers, publishing houses, mass media; accomplishing activities in various business entities, non-governmental, non-profit and public organizations and other institutions; local self-government bodies, local centers of spirituality and enlightenment, as well as preschool educational institutions. TEXT STUDIES AND LITERARY SOURCES Theoretical and practical directions of textual and literary source studies; the main methods of determining the palaeographic features of manuscripts and the criteria for their evaluation, the oldest records, their types; book art; manuscript collections of the Republic of Uzbekistan and abroad, rare sources stored in them; the scale of medieval written sources in the Republic of Uzbekistan and abroad are studied in this direction. Graduates can conduct research at the Academy of Sciences and branch research institutes as a junior researcher, researcher, senior researcher, leading specialist; can teach Oriental and Western languages along with their specialties in general secondary, secondary special, vocational education institutions, Manuscript Archeography, Auxiliary Development and Cataloging; work with ancient written manuscripts, their translation, preparation of bibliographic materials, writing reviews; technical and other types of translation, as well as professional activities such as intensive language learning. TRANSLATION THEORY AND PRACTICE (IN ORIENTAL LANGUAGES) Theoretical and practical bases and vocabulary of the Oriental language, translation of fiction and scientific literature in this language, translations in the studied language and their development, simultaneous translation and intercultural dialogue, the process of dialogue and methods of translation are studied in this field of education,. Graduates can teach Oriental and Western languages, along with the subjects studied specialized in preschool, general, secondary special educational institutions; as well as they can accomplish translation and editing works in the media, translation in government agencies, international organizations, government and non-government institutions related to tourism; working as a manager and administrator in hotels and travel agencies and intensive teaching of the studied languages. HISTORY (BY EASTERN COUNTRIES AND DIRECTIONS) This is a general history, the richness of the language and vocabulary of the studied Eastern country; regional (country) history, historical sources and historiography, methods of historical research, history of religious relations, culture and spirituality, socio-political, economic, ethnic processes, historical, religious-philosophical and ideological worldview systems, material and spiritual culture issues are studied in this field of education. Graduates will be able to teach Oriental and Western languages (along with their specialties) in preschool, general and secondary special educational institutions, as well as can work as a junior researcher and scientific-technical worker in social and humanitarian research institutions and organizations; archives, museums, manuscript funds, information and resource centers, publishing houses, mass media, various business entities and others, as well as scientific and technical staff, editor, bibliographer, translator. HISTORY (CENTRAL ASIAN COUNTRIES) Teaching Oriental and Western languages along with the subjects of his specialization in this field of education; scientific, historical and spiritual issues, academic, research and development institutions and organizations related to the history of Central Asia; public administration bodies; Research institutes, museums, public and private archives of the Academy of Sciences of the Republic of Uzbekistan; manuscript funds; non-governmental and non-profit organizations; production associations of any form; Complex issues related to the specialty are studied in the centers for the study of historical, cultural and spiritual heritage in this direction of education. Graduates will be able to teach Oriental and Western languages (along with their specialties) in pre-school, general, secondary special, vocational education institutions, as well as can work as a junior researcher and scientific-technical worker in the system of higher education in social and humanitarian research institutions and organizations; archives, museums, manuscript funds, information and resource centers, publishing houses, mass media, various business entities and others, as well as a scientific and technical staff, editor, bibliographer, translator. In this field of education, students can study current events in world politics and diplomatic relations. They will also study the main factors of foreign policy and diplomatic activity as well as the international relations of the Republic of Uzbekistan and foreign countries. At the same time, complex questions related to the activities of States, international organizations, trade unions and associations will be studied. Graduates can work in diplomatic missions and consular posts of the Republic of Uzbekistan in foreign countries, in diplomatic missions and consular posts of foreign countries in the Republic of Uzbekistan. As well as they will be able to work as a specialist in international departments of state committees, authorities and other government agencies and institutions. They may work as research assistants at research institutes; can teach special subjects in the system of general, secondary specialized and vocational education, and can teach studied Oriental and Western languages. They can also accomplish professional activities in archives, information resource centers, publishing houses, mass media, various business entities, non-governmental, non-profit and public organizations and other institutions, such as scientific and technical staff, bibliographer, and translator. PHILOSOPHY (EASTERN PHILOSOPHY AND CULTURE) In this field of education, the history of philosophy and culture of the peoples of the East, the main stages of the development of philosophical thought in the countries of the East, spiritual heritage and values will be studied. In addition, the general laws of nature, society, and the development of thought; the basics of national spirituality and the peculiarities of Eastern culture, its role in the development of world civilization, as well as reading and interpretation of philosophical and literary literature in the studied Oriental and English languages; teaching skills, complex issues related to speech culture will be studied. Graduates can teach studied Oriental and Western languages in preschool, general, secondary and special education institutions and work in research institutes of the Academy of Sciences of the Republic of Uzbekistan, archives and museums. They can work at state and local authorities, spirituality and enlightenment centers and departments for the promotion of national ideas, tourism, development of cultural ties, organizational management, as a scientific and technical staff in the field of translation, editor, bibliographer, translator, and can perform professional activities at governmental and non-governmental systems related to international level. Foreign Economics and Country Studies (By countries and regions) Current education will teach the state of education of the socio-economic development of the Eastern region, the current problems and prospects, the external economic relations of the region, the directions of integration into the economic system world, history, culture, language, socio-political system of the region and special secondary education; complex issues related to the educational process in the vocational education system. Graduates can work as referents in economic departments and divisions of ministries, state committees, and authorities and other government agencies, institutions, international economic organizations, representations of the Republic of Uzbekistan in international economic organizations and representations of international economic organizations in the Republic of Uzbekistan. They can either work as junior researchers in economics and business research institutions; teaching special subjects in the system of general secondary special, vocational education; can carry out professional activities such as working as a translator and expert-consultant in enterprises of different forms of ownership. JOURNALISM; INTERNATIONAL JOURNALISM (WITH ORIENTAL LANGUAGES) In this field of education, complex issues such as mass media, public administration, governmental and non-governmental information services, PR (public relations) and advertising agencies, the Internet, methods of rapid information exchange and providing reliable information to the public are studied. Graduates will be able to prepare press releases and journalistic materials and work on radio and television, news, analytical and artistic journalistic genres; news disseminated through news agencies; may deal with advertising agency products. They also work on indoor and outdoor advertising, Internet journalism materials, websites, social networks and hypertext. In addition, they work on information materials, press releases of public administration bodies, ministries, enterprises and departments, press centers and also can do professional activities such as public relations (PR) services, information materials, publishing concern and production of printed materials for printing houses. GUIDE ACCOMPANIMENT AND TRANSLATION ACTIVITIES (ORIENTAL LANGUAGES) In this field of education, students may study the following: the guide works in the field of guided accompaniment, interpretation and simultaneous translation, translation studies, linguistic research, guiding perspectives, professional skills, business translation skills and methods, ccomplex issues related to the development of methods, translation services to acquaint tourists and excursionists with the tourist resources of the country (place) of temporary stay, the organization of the translation system in international organizations, various governmental and non-governmental institutions. Graduates will be able to analyze the types of translation, two-way interpretation as verbal and writing interpretation, simultaneous translation, intercultural communication, and guide accompaniment and translation studies; the use of modern pedagogical and information and communication technologies in the field of translation. They will also learn about the history of our country, ethnography, economy, tourism planning and excursions as well as, performing professional activities such as providing security, emergency response, first aid, teaching guide accompaniment in specialized vocational education institutions. TOURISM (WITH ORIENTAL LANGUAGES RELATED TO THE FIELD OF ACTIVITY) In this field of education, intangible assets belonging to tourism entities in the field of tourism products, technological processes for the provision of tourism services, the results of intellectual activity, property or other legal grounds will be studied. In addition, issues such as the development and sale of residential buildings, restaurants, sightseeing sites, vehicles, other tourism enterprises and tourism products will be studied in a complex way. Graduates will be able to organize and conduct presentations of new tourism products, business negotiations, advertising campaigns, planning and development of tourist programs, calculation of tour prices, hotel reservations and ticket sales. They can also make excursion programs and other additional services, provide information about guides, issue travel documents, engage in visa services, and conduct marketing events as well as to cooperate with travel agencies and other organizations, directly sell travel packages, make an agency and other agreements, perform administrative functions, and develop travel-planning programs. It is possible to determine the needs of human resources and material resources of tour operators, to carry out such professional activities as the creation of a database of tourist products and information agencies. STUDENTS WHO HAVE GRADUATED FROM THESE DIRECTIONS OF EDUCATION CAN CONTINUE STUDYING FOR A MASTER’S DEGREE AT THE UNIVERSITY IN THE FOLLOWING SPECIALTIES STRENGTHENING THE ABOVE PROFESSIONAL KNOWLEDGE, SKILLS AND ABILITIES AND CONTINUE THEIR FUTURE ACTIVITIES IN SCIENTIFIC RESEARCH AND HIGHER EDUCATION SYSTEM: 5А120101 – Literary Studies (Oriental Languages) 5А120102 – Linguistics (Oriental languages) 5А120103 – Classical philology (by types) 5А120201- Comparative Linguistics, Linguistic Translation Studies (Oriental Languages) 5А120202 – Simultaneous translation (Oriental languages) 5А120302 – History (by directions and types of activities) 5А120304 – Historiography, Source Studies and Methods of Historical Research (by country) 5А120502 – Eastern philosophy and culture 5А120701 – Textual and Literary Source Studies (by languages) 5А121102 – International relations and world politics 5А121401 – Ethnography, ethnology and anthropology 5А231001- Foreign Economics and Country Studies (by countries and regions) 5А231102 – Foreign economic activity (by sectors and areas of activity) 5А610301 – Tourism (by areas of activity)

<urn:uuid:b153425a-de7e-4b1c-88c6-100cc9c9dc4f>

CC-MAIN-2024-10

https://tsuos.uz/en/bakalavr-talim-yonalishlari/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

b. 1812 – Virginia Bell received 640 acres in Texas for his participation in the battle of San Jacinto, and 1,080 acres and a headright certificate for one-third league of land for additional service in the Texas army. He joined the Texas Rangers during the Somervell expedition and later served in the U.S. Army under General Zachary Taylor in the U.S.-Mexican War. Bell was elected governor for two terms. He gained experience in frontier affairs during his military service, which helped inspire confidence in rapidly moving the line of settlement southwestward. Bell was elected governor for two terms but resigned a few months before his second term expired to fill the vacancy in the U.S. Congress caused by the death of David Kaufman. Bell County is named for him.

<urn:uuid:f7ab2e97-9d1f-46c2-aaed-52620aa10dce>

CC-MAIN-2024-10

https://txfgm.org/governors/peter-hansbrough-bell-1849-1853/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

“Our strength is in our sensitivity. When we are open to our pain and to the pain of other people, when we are sensitive to our needs, then we can support one another and in this compassion find the strength for healing and renewal.” – Oleh Romanchuk, Director of the UCU Institute of Mental Health, took part in the Third Summit of Ladies and Gentlemen of Europe. The theme of the meeting was: “Mental Health: The Fragility and Resilience of the Future.” Oleh Romanchuk, Director of the UCU Institute of Mental Health. Photo: Facebook page of Olena Zelenska Oleh Romanchuk spoke with noted British author, actor, and intellectual Stephen Fry during the Summit, which was held in Kyiv on September 6, about our resilience, challenges, and possibilities in the field of mental health. Oleh Romanchuk is a doctor and psychotherapist, a children’s psychiatrist at the Family Circle Center, and Director of the UCU Institute of Mental Health and the Ukrainian Institute of Cognitive-Behavioral Therapy. Oleh Romanchuk and Stephen Fry. Photo: Facebook page of Olena Zelenska We share the main themes of his presentation at the Summit: - Mental health is sensitive to the challenges of the modern world, and in Ukraine also to the challenges of war. And though we have problems and a lack of services, there is hope. People expect the situation to improve. There is hope in our resilience, support, and solidarity. There is hope in academic discoveries and possibilities for the help of specialists. The conclusion is simple: there is much work to do. It’s good to begin with education, which is overcoming stigmas and creating a culture to nurture mental health. - On the one hand, resilience is our ability to go through trials but, despite them, to maintain and renew mental health, personal integrity, and welfare. On the other hand, this is the immune system of the mind, which gives us the strength to defend against various challenges, to be strong. - Nurturing resilience is our national priority. We understand that this is our collective and individual system of “air defense.” It gives us the strength to defend against the challenges of war and to heal wounds. We need this very much. - As a practicing psychotherapist, I constantly see the strength of the human spirit. There is much suffering and disorder, but there is also great love and support. This moves and inspires me incredibly. Other participants at the Summit from Ukrainian Catholic University were Vice-Rector Natalka Klymovska and the head of projects and programs at the UCU Institute of Mental Health, Doctor of Psychiatry Orest Suvalo. From left to right: Serhiy Mishchuk, Head of the Psychological Service (Vinnytsya); Orest Suvalo, Acting Director of UCU’s Institute of Mental Health; Natalka Klymovska, UCU Vice-Rector; Oleh Romanchuk, Director of UCU’s Institute of Mental Health; Andriy Karachevskyi, Officer of the Department of Psychological Support. A full recording of the discussion can be seen below (beginning at 4:56:24): We note that the UCU Institute of Mental Health was a partner of the Third Summit of First Ladies and Gentlemen on the theme “Mental Health: The Fragility and Resilience of the Future,” held in Kyiv on September 6, 2023.

<urn:uuid:1e094542-14d7-4b28-94c6-9b91411031c7>

CC-MAIN-2024-10

https://ucufoundation.org/oleh-romanchuk-summit-of-first-ladies-and-gentlemen/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Here we have discussed the MSME udyam registration for Hotel & hospitality industry. Do check their eligibility criteria, documents required and online procedure to get registered under the udyam registration portal. MSME Udyam Registration Form for Hotel Business A hotel is a building where people stay, for example, on vacation, and pay for their rooms and meals.A hotel is a business that provides paid lodging, usually for a short period of time. One of the most profitable and best business ideas in India is the hotel industry. As a result of the prime attractions and diverse culture in India, visitor inflows are steadily increasing. As of now, one of the profitable businesses to start is the lodging industry. In addition, India is one of the leading countries where the travel and tourism sector contributes significantly to the country’s GDP. The current trend shows that demand for hotel accommodations is increasing at a rate of 6% per year. However, supply is growing at a rate of 3% per year. As a result, there is enormous opportunity in the hotel industry for someone looking to start a new business. So any business owner can apply for a udyam registration certificate for a hotel. And list out their business under the ministry of msme so they can avail various benefits for the government of India and uplist their hotel business. It is a difficult process to open and maintain an independent Hotel. You must conduct market research, make financial arrangements, obtain medical store loans, obtain permits, hire staff, and much more. It is easy to obtain a Hotel MSME Udyam Registration in India. Fill this MSME Registration Udyam Registration Form for getting your Hotel business certified by the ministry of MSME. Excellent opportunity for the Hotel business service enterprises for Regular & Rural Retail hotel to fill out this udyam registration application form and get registered under the new portal of MSME. InIndia wherever you conduct business that involves the exchange of goods and services, you must obtain a GST Registration and udyam registration in India. You can seek the assistance of a legal service provider to obtain GST and udyam registration. More about Hotel Business Service in India With a total area of 3,287,263 square kilometres extending from the snow-covered Himalayan heights to the tropical rain forests of the south, India has a rich cultural and historical heritage, as well as a diverse ecology, terrains, and natural beauty. This presents a significant opportunity to fully realise the tourism sector’s potential. Because India is one of the most popular travel destinations in the world, the Indian tourism and hospitality industry has emerged as one of the key drivers of growth in India’s services sector. Tourism has significant potential in India, as it is an important source of foreign exchange in India, as it is in many other countries. Foreign exchange earnings increased at a CAGR of 7% from 2016 to 2019, but fell in 2020 due to the COVID-19 pandemic. The tourist and hospitality sector, which includes travel and hospitality services such as hotels and restaurants, is widely acknowledged as a development agent, a catalyst for socioeconomic growth, and a significant source of foreign exchange gains in many countries. Tourism highlights India’s rich and exquisite history, culture, and diversity while also providing significant economic benefits. The tourism industry has recovered from the covid-19 pandemic shock and is operating at pre-pandemic levels thanks to the consistent efforts of the central and state governments. According to the World Travel and Tourism Council, India ranks 10th out of 185 countries in terms of travel and tourism’s total contribution to GDP in 2019. In 2019, travel and tourism contributed 6.8% of total GDP, or Rs. 1,368,100 crore (US$ 194.30 billion). In 2020, the Indian tourism sector employed 39 million people, accounting for 8% of total employment in the country. The Indian travel market is expected to grow to US$ 125 billion by FY27, up from an estimated US$ 75 billion in FY20. The Indian airline travel market is estimated to be worth US$ 20 billion, and it is expected to double in size by FY27 as airport infrastructure improves and access to passports expands. The Indian hotel market, including domestic, inbound, and outbound travel, was valued at US$ 32 billion in FY20 and is expected to grow to US$ 52 billion by FY27, driven by rising traveller demand and the continued efforts of travel agents to expand the market. International tourist arrivals are expected to reach 30.5 billion by 2028, generating over $59 billion in revenue. Domestic tourists, on the other hand, are expected to drive growth following the pandemic. International hotel chains are expanding their presence in the country, and it will account for approximately 47% of India’s tourism and hospitality sector by 2020, rising to 50% by 2022. Foreign Tourist Arrivals (FTAs) in August 2022 were 498,243, representing a 437.3% increase over 92,728 in August 2021. FTAs totaled 3,263,219 from January to August 2022, up from 638,524 from January to August 2021. Bangladesh had the highest percentage share of foreign tourist arrivals in India during August 2022, followed by the United States (16.93%), the United Kingdom (10.74%), Australia (3.77%), Canada (3.44%), Sri Lanka (3.18%), Nepal (2.56%), Malaysia (2.54%), Germany (2.16%), France (2.01%), Oman (1.98%), Singapore (1.73%), the United Arab Emirates (1.45%), Italy (1.19%), and Japan (1.17%). The Indian hospitality industry, led by the hotel market, has emerged as one of the primary sectors driving the country’s economic growth. Hotels in India are classified according to their location (city hotels, airport motels, resorts, and so on), level of service (upscale, mid-market, and economy), and themes (boutique hotels, heritage hotels, etc.). With 440 approved hotels, Kerala is expected to be the leading provider of hospitality services in the country. The other states in the top five in terms of hospitality services are Maharashtra, Gujarat, Rajasthan, and Tamil Nadu. Rooms have traditionally been the most important source of revenue for hotels. In fiscal year 2017, rooms accounted for 53.6% of total revenue in Indian hotels, followed by food and beverages and banquet services. Hotel rooms are in high demand across the country as a result of increased business and leisure travel. Hotel owners are implementing cutting-edge marketing strategies such as social media, which have proven to be effective in increasing exposure and booking volume. Consumers are increasingly using hotel booking apps because they are simple to use and provide users with the best options based on their needs. By harmonising taxes and lowering business transaction costs, the implementation of the goods and services tax (GST) and udyam registration has helped business men in the hotel & hospitality industry save money. This, however, has been an advantage for hotel owners because the final cost that end users bear has decreased, increasing their profit margins. Investments/Developments for Registered MSME’s in Hotel & Hospitality Industry Between April and June 2022, FDI inflows into the tourism and hospitality sectors totaled US$ 16.48 billion. - A total of 48,775 lodging units (both classified and unclassified) have been registered on the National Integrated Database of Hospitality Industry (NIDHI) portal, with 11,220 units self-certifying for SAATHI standards in September 2022. - Indian Hotels Company (IHCL) announced the launch of Loya, its new Indian-concept restaurant brand, in October 2022. Loya, which made its debut at the Taj Palace in New Delhi, captures the culinary essence of North India’s landscape. - OYO, the hospitality unicorn, has agreed to buy Direct Booker, a vacation rental company based in Europe, for US$ 5.5 million in May 2022. - Accor, a French hospitality company, will expand its portfolio in India by adding nine new hotels in the mid-scale and economy categories, bringing the total number of hotels in India to 54. - From 2020 to 2027, the Medical Tourism sector is expected to grow at a CAGR of 21.1%. - With an inflow of US$ 45.7 billion in 2018, India ranked third globally in terms of investment in travel and tourism, accounting for 5.9% of total investment in the country. - The Indian government estimates that the country will have 1.2 million cruise visitors by 2030-31. Dream Hotel Group intends to invest approximately $300 million in the cruise sector in India over the next 3-5 years. - In terms of digital tools used for planning, booking, and experiencing a journey, India is the most digitally advanced traveller nation. The rising middle class and rising disposable income in India have aided the growth of domestic and outbound tourism. - Pochampally in Telangana was chosen by the United Nations World Tourism Organization as one of the best tourism villages in November 2021. Who needs a Udyam Certificate in Hotel & Hospitality Business? In India, the Udyam registration or Udyam certificate is required for micro, small, and medium-sized enterprises (MSMEs) to avail of various government schemes and subsidies. Therefore, any hotel or hospitality business in India that falls under the definition of MSME is required to obtain the Udyam certificate. As per the definition, hotels and hospitality businesses with an investment of up to Rs. 50 crore and a turnover of up to Rs. 250 crore are considered as MSMEs. Therefore, if your hotel or hospitality business falls within this category, you will need to obtain a Udyam certificate. Hotels and the hospitality industry are integral parts of one of India’s fastest growing industries. This is due to an increasing number of people opting for travel and tourism. Lifestyles are changing, and they are changing quickly in major cities. These hotels cater to a large number of people. These include pregnant women, ladies, the elderly, and people of all ages. As a result, it is equally important that the quality of food and hygienic practices are maintained in these hotels. To begin operations in India, all hotels must obtain an Udyam registration certificate from the Ministry of MSME. This udyam licence is subject to the terms and conditions outlined in the agreement. The terms and conditions of the MSME Act of 2006 apply to this licence. After obtaining the udyam certificate licence, every hotel, restaurant, bar, and cafe must follow these guidelines. There is a detailed guideline that hotels must follow in order to apply for an udyam License. The process is entirely online, and all details and documents must be submitted online. After receiving the udyam e-certificate, the hotelier must apply for a new fssai licence, modifications, and duplicate licences as needed. A licence is usually only valid for one year and must be renewed before it expires. Hotels can also apply for either a Central or a State FSSAI licence. It is usually valid for one year and then renewed. Eligibility Criteria For (Udyam Registration) MSME Registration For Hotel & Hospitality Businesses The eligibility criteria for MSME registration (formerly Udyam Registration) for Hotel & Hospitality Businesses in India are as follows: - Business Entity: The hotel or hospitality business must be registered as a legal entity under any of the following: Proprietorship, Partnership, Private Limited Company, Limited Liability Partnership (LLP), or any other form of business entity. - Investment Limit: The investment limit for micro, small, and medium enterprises (MSMEs) in the hotel and hospitality sector is as follows: - Micro Enterprise: Investment in plant and machinery or equipment should not exceed Rs. 1 crore and the turnover should be less than Rs. 5 crores. - Small Enterprise: Investment in plant and machinery or equipment should not exceed Rs. 10 crores and the turnover should be less than Rs. 50 crores. - Medium Enterprise: Investment in plant and machinery or equipment should not exceed Rs. 50 crores and the turnover should be less than Rs. 250 crores. - Aadhaar Card: The proprietor, partner, director, or authorized signatory must have a valid Aadhaar card. - PAN Card: The business must have a valid Permanent Account Number (PAN) card. - GST Registration: The business must be registered under the Goods and Services Tax (GST) regime. - Bank Account: The business must have a valid bank account in the name of the business. Note: These eligibility criteria may be subject to change, and it is recommended to refer to the official government website for the latest information on MSME registration. |Investment in plant, and equipment |INR10000000 or less |INR50000000 or less |INR100000000 or less |INR500000000 or less |INR500000000 or less |INR250000000 or less The above are some of the most important requirements for obtaining a Hotel udyam registration certificate. Hotel owners that meet these requirements will be permitted to advance to the next of msme udyam registration process. Documents Required For Udyam Registration For Hotel The documents required for Udyam Registration (formerly MSME Registration) for Hotel and Hospitality Industry in India are as follows: - Aadhaar Card: Aadhaar card of the proprietor, partner, director, or authorized signatory. - PAN Card: PAN card of the business entity. - GST Registration Certificate: GST registration certificate of the business entity. - Bank Account Details: Bank account details of the business entity. - Business Address Proof: Any one of the following documents can be submitted as business address proof – property tax receipt, rent agreement, electricity bill, telephone bill, or any other utility bill. - Nature of Business: A brief description of the nature of the hotel or hospitality business, including the activities carried out, products or services offered, and the location of the business. - Investment and Turnover Details: Details of the investment in plant and machinery or equipment, turnover, and the number of employees. - Self-declaration Certificate: A self-declaration certificate confirming the accuracy of the information provided. The above list of documents is indicative and subject to change, and it is recommended to refer to the official website for the latest information on Udyam Registration for the Hotel and Hospitality Industry. You can begin the online udhayam registration process right away if you have these udyam registration documents for the hotel and hospitality industries. Remember that your phone number must be linked to your Aadhaar card. Udyam Registration Process for Hotel and Hospitality Industry Business The new msme registration process for a hotel in India on the udyam registration portal is outlined below. Follow the steps outlined below to obtain certification from the Ministry of MSME. Step 1: Go to the Udyam registration portal Step 2: Correctly complete the Udhayam Registration Application form. Step 3: Pay for your registration online service. Step 4: One of the udyam executives helpline will begin the MSME Udyam registration process. Step 5: You will receive an Udyam registration number at your registered email address within a few working hours. Note: You will receive the OTP during the process, which you must share with our executive for further processing. If you have already registered your Hotel at the Ministry of MSME and want to convert your Udyog Aadhar certificate to an Udyam certificate, please visit https://udyamregistrationform.com/udyog-aadhar-to-udyam/. Benefits of Udyam registration for Hotel and Hospitality Industry Business The benefits of Udyam registration (formerly MSME registration) for Hotel and Hospitality Industry business in India are as follows: - Access to Government Schemes and Subsidies: Udyam registration provides access to various government schemes and subsidies, including financial assistance, credit facilities, and tax benefits. - Collateral-free loans: MSMEs registered under Udyam can avail of collateral-free loans from various banks and financial institutions. - Priority Sector Lending: Udyam registration helps in availing of priority sector lending, which means banks have to allocate a certain percentage of their lending to the MSME sector. - Concession on Electricity Bills: MSMEs registered under Udyam can avail of a concession on electricity bills. - Exemption from Stamp Duty: Udyam-registered MSMEs can avail of an exemption from stamp duty and registration fees for various transactions. - Protection against Delayed Payments: Udyam registration provides protection against delayed payments from buyers, and the buyer is liable to pay interest on the delayed payment. - Tender Participation: Udyam-registered MSMEs are eligible to participate in government tenders reserved for MSMEs, which helps in increasing business opportunities. - Brand Building: Udyam registration helps in building the brand of the hotel or hospitality business and provides recognition as an MSME. Note: The above list of benefits is indicative and subject to change, and it is recommended to refer to the official government website for the latest information on the benefits of Udyam Registration for the Hotel and Hospitality Industry. Frequently asked question & answer How to apply for a Udyam Registration for Hotel in India? For udyam registration process for Hotel is very simple, visit udyamregistrationform.com, fill out the form, make the online payment and within 1-2 working hour receive your udyam registration certificate with unique number. What is the msme udyam certificate for Hotel business? Here is the sample Hotel and hospitality business msme udyam certificate for your review. Can Hotel’ owners apply for udyam registration certificates? Yes, Hotel’ owners can apply for udyam registration certificates. How do I register my Hotel on MSME? To register your hotel with MSME, go to the udyam registration portal, fill out the application form, pay the processing fees, and an executive will verify your business details and issue you an udyam certificate. Is udyam registration mandatory for hotel services? Yes, hotels and hospitality service businesses in India should register with the msme udyam registration portal so they can avail various government benefits. Can Hotel business edit udyam registration? Yes, Hotel businesses can edit and update their udyam registration certificate online. How to do udyam registration for a Hotel company? For registering your Hotel company on udyam registration portal visit the official platform, fill out the udyam registration form correctly and verify it with your registered aadhar phone number. And within you will get an email of your udyam registration certificate. The Udyam registration consultancy firm is dedicated to assisting entrepreneurs and small business owners in establishing, managing, and growing their businesses while remaining financially secure. Our goal is to educate the entrepreneur on legal and regulatory requirements, as well as to be a partner throughout the entire business life cycle, assisting at every level to ensure that the firm remains compliant and grows. Udyam registration helpline can assist you in opening a Hotel in India with an udyam certificate. If you can’t find what you’re looking for, please contact us using the application udyam form above; our customer service executive staff will be happy to help. Furthermore, if you require any assistance with the MSME Udyam Registration, please contact our business udyam advisors at 93472 86790. Also Read these MSME Articels: Get your Udyam Registration Now

<urn:uuid:82e7225f-4670-4f27-8b05-4fb874ae6cb0>

CC-MAIN-2024-10

https://udyamregistrationform.com/udyam-registration-for-hotel/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Sufficient sleep is required for peak performance (e.g., physical, mental). Both the amount of sleep and the quality of the sleep matter for positive outcomes. That said, the amount of sleep you need varies from person to person. For young adults (age 18-25), 7 to 9 hours of sleep per night are recommended. However, individual sleep needs vary from 6 to 10 hours, so make sure you know how much sleep you need to function efficiently. Sleep for a healthy mind and body Uninterrupted sleep is important to experience periods of rapid eye movement (REM), which are necessary for learning, problem solving, and storing memories Impaired or inadequate sleep can impact: memorization concentration motivation creativity reaction time coordination mood (e.g., irritability, impatience, and depression) Signs you're not getting enough sleep You can find out how much sleep you need by reviewing the following questions: Do you have trouble waking up in the morning? Do you sleep 2 hours or more later on weekends than during the week? Do you fall asleep during the day (e.g., in class, studying, etc.)? If any of the answers to these questions is "yes", it could be a sign that your body needs more sleep, consistently. Tips for a good night’s sleep Establish regular sleeping patterns (going to bed and getting up around the same time everyday) Avoid going to bed hungry or full. Get regular exercise (3-4 times per week), but not right before you plan to go to sleep – mid-afternoon is best. Use your bed only for sleep (and sex). Avoid using it to study, eat, chat with friends, etc. Make sure your room is dark (e.g., use a sleep mask, close shades) and quiet (e.g., wear earplugs), and the right temperature (cooler temperatures are better). Take naps before 3 p.m. and for less than an hour. Eat foods rich in the amino acid L-tryptophan (e.g., milk, turkey, tuna) and carbohydrates (e.g., bread, cereal). Avoid caffeine, alcohol, and large amounts of sugar. Take warm shower or bath. Read a book, or some other calm activity. Go to sleep and get up around the same time every day to set your body’s rhythm. Practice relaxation techniques before bedtime. Deep breathing and visualization techniques can help you relax and facilitate sleep. Avoid sleep-disturbing substances like alcohol and caffeine. Alcohol creates the illusions of good sleep but can impact REM and overall sleep quality.

<urn:uuid:bce416a2-ff2c-443b-975c-246b1034e069>

CC-MAIN-2024-10

https://uhs.princeton.edu/health-resources/sleep

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Paseo del Morro is a walkway that skirts the city walls from the San Juan Gate to Castillo de San Felipe del Morro, along the entrance to the San Juan Bay. The trail once served as a maintenance road for the west section of the city walls. In 1998 it was opened to the public and in 2001 it was designated as a National Recreational Trail. The walkway offers spectacular views of a long section of the city walls, allowing visitors to imagine the immensity of the task that was the construction of the murallas, a project that began in 1630 and didn’t finish until 1790. Those working on the building included skilled stonecutters and masons, labourers, soldiers, convicts and slaves. Today the historic walls are no longer under attack by foreign troops, but by plants. Along with the wind, rain and ocean waves, plants are one of the most powerful natural forces that can damage the fortifications. Along Paseo del Morro a number of features have been installed to help protect the historic features of the fortification above from erosion. A breakwater was installed in 1949 and a rock pile along the shore, called a riprap, was started in the 1970s and completed in the 1990s. Concrete coating, known as shotcrete, was sprayed, or ‘shot’, onto the slope to further protect the National Historic Site. The Paseo del Morro, from the San Juan gate to El Morro, is around 2.5 kilometres (1.5 miles) long and the walkway is open daily from 9:00 to 18:00. Visitors can follow the path around to the north of El Morro and climb a flight of stairs, which leads to the esplanade at the front of the fort.

<urn:uuid:dcd67521-8d99-4407-8b5e-0b057c55616e>

CC-MAIN-2024-10

https://uncover.travel/paseo-del-morro-the-scenic-promenade-from-the-san-juan-gate-to-el-morro-puerto-rico/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

UnNews:Global Warming revives baby mammoth-sicle |Straight talk, from straight faces |Wednesday, February 28, 2024, 13:54:UTC)( |Global Warming revives baby mammoth-sicle 7 January 2008 SOME COLD PLACE –- Scientists made a stunning discovery today of a well-preserved baby mammoth thought to have lived nearly 40,000 years ago, a finding that may shed light on the broad implications of climate change. Frozen for millennia under layers of permafrost in one of the coldest regions on earth, the great state of Minnesota, the mammoth was revealed by the effects of global warming melting the North American ice mass. Scientists were astonished at how well-preserved the mammoth remained, still replete with skin, bits of fur, and a roughly hewn quarter from the tusk-fairy engraved with a picture of Jesus. It took a visiting child at the museum exhibiting “Dumbo,” however, to realize that the mammoth didn’t only look alive. Found by paramedics to be breathing shallowly, Dumbo was rushed immediately by helicopter to Los Angeles’s King Drew Medical Center, widely regarded as the most efficient hospital in the United States. Scientists were shocked by this new development, and President George W. Bush capitalized on the feeling sweeping the nation that global warming was a miracle by challenging citizens to increase their carbon footprint by 100% in 2008. In response, California Terminator Ahnold Schwarzenebuchednezzar allegedly purchased four new Hummers, and a blimp. When asked for a comment, Al Gore, known as a major supporter of dead baby animals such as polar bears, penguins, and Republicans, muttered sullenly that this finding was “an inconvenient truth,” and that he would be expecting a recount within the week. Backing Gore's skepticism is famed pop star Kanye West, who told reporters in a highly original soundbite that "George Bush doesn't care about frozen baby mammoths."

<urn:uuid:d467ee0a-8ba8-41ad-9f3f-554618f7c7e0>

CC-MAIN-2024-10

https://uncyclopedia.com/wiki/UnNews:Global_Warming_revives_baby_mammoth-sicle

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

In 1995, no one would have predicted the success that has been seen in the reintroduction of the wolf into wilderness areas in Idaho, Montana and Wyoming. One goal of the U.S. Fish and Wildlife service was to have 10 breeding pairs in the three recovery areas. In the most recent study, there were more than 900 wolves in the tri-state region. During the past summer, the Utah Division of Wildlife Resources conducted meetings statewide to determine the measure of control that would be exacted on Utah?s wolf population. While there is an argument of whether Utah has a wolf population, almost all biologists contend that in Utah?s wildest regions, a population will find its way there. In the presentation made by the Daily Universe, we showed residents the importance of being aware of the process that was used to reintroduce the populations to wilderness areas; the difficulties in monitoring, controlling and eliminating those animals. We feel Utah DWR officials are taking proper steps through the public hearing process to make certain all voices from all segments concerned are represented, so when wolves are introduced or naturally disperse into the state, the proper laws are in place for monitoring and control. We applaud the state and hope the laws needed will be in place by the time the first low howl of a wolf comes down from Lone Peak.

<urn:uuid:5fb88610-675e-4b04-8066-ac825d799e39>

CC-MAIN-2024-10

https://universe.byu.edu/2005/09/20/editorial-reasons-for-wolf-package/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Southern Conference on African American Studies, Inc., C. Calvin Smith Book Award “Young . . . looks at both sides of Church’s personality, and he has painted Church’s image onto the larger canvas of African American political struggle.”—Journal of American History “An enlightening local study of racial politics in a Southern city. Written in concise, accessible, and jargon-free prose, this will be the definitive book on Robert Church Jr. for decades to come.”—Journal of African American History “A powerfully argued critical study of one of the most influential figures who lived during the first half of the twentieth century.”—Journal of Southern History “An original portrait of a largely unheralded African American political and civil rights leader in the first half of the twentieth century. Young draws from an impressive range of primary and secondary sources to provide a much-needed biography of this important figure.”—Elizabeth Gritter, author of River of Hope: Black Politics and the Memphis Freedom Movement, 1865–1954 “A meticulous and well-researched biography that reintroduces us to a titan of the early civil rights struggle.”—Charles W. McKinney Jr., author of Greater Freedom: The Evolution of the Civil Rights Struggle in Wilson, North Carolina This volume highlights the little-known story of Robert R. Church Jr., the most prominent black Republican of the 1920s and 1930s. Tracing Church’s lifelong crusade to make race an important part of the national political conversation, Darius Young reveals how Church was critical to the formative years of the civil rights struggle. A member of the black elite in Memphis, Tennessee, Church was a banker, political mobilizer, and civil rights advocate who worked to create opportunities for the black community despite the notorious Democrat E. H. “Boss” Crump’s hold over Memphis politics. Spurred by the belief that the vote was the most pragmatic path to full citizenship in the United States, Church founded the Lincoln League of America, which advocated for the interests of black voters in over thirty states. He was instrumental in establishing the NAACP throughout the South as it investigated various incidents of racial violence in the Mississippi Delta. At the height of his influence, Church served as an advisor for Presidents Harding and Coolidge, generating greater participation of and recognition for African Americans in the Republican Party. Church’s life and career offer a window into the incremental, behind-the-scenes victories of black voters and leaders during the Jim Crow era that set the foundation for the more nationally visible civil rights movement to follow. Darius J. Young is associate professor of history at Florida A&M University. Publication of the paperback edition made possible by a Sustaining the Humanities through the American Rescue Plan grant from the National Endowment for the Humanities.

<urn:uuid:534edebf-30fb-47a1-af31-9cf1f957444a>

CC-MAIN-2024-10

https://upf.com/book.asp?id=9780813056272

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

KWin is the window manager of the KDE workspace. This application is responsible for placing and managing windows, managing virtual desktops and many important actions like the shortcut alt+tab to change the active window. KWin's global shortcuts can be configured via "Systemsettings -> Keyboard & Mouse -> Global Keyboard Shortcuts". There you have to select KWin in "KDE component". The following table lists the most important shortcuts with their default settings. |Switch to desktop 1 |Switch to desktop 2 |Switch to desktop 3 |Switch to desktop 4 |Walk through windows |Walk through windows (reverse) |Window Operations Menu |Activate window demanding attention |Desktop screenshot to clipboard |Window screenshot to clipboard |Show desktop grid |Toggle present windows (current desktop) |Toggle present windows (all desktops) The following sections will present many mouse and key combinations. That is always the default configuration. Each of these combination can be changed. That is described in section configuration. The size of a window can be changed most easily with the maximize button. This button is by default the second button from right side in the titel bar. By clicking it with the left mouse button the window will be both horizontally and vertically maximized or the original size is restored. By clicking the button with the middle mouse button the window will be vertically maximized and by clicking with the right mouse button the window will be horizontally maximized. By double clicking the title bar with the left mouse button the window will be maximized as well. If the window is not maximized the window size can be changed individually. Therefore you move the mouse to the window border. Now a size-change mouse cursor will be shown. By pressing the left mouse button and simultaneous moving of the mouse (dragging) the size of the window will be changed. If it is difficult to reach one of the borders, you can press the alt-key in combination with the right mouse button to change the size. There is also a option in the useraction menu available. A window can be moved via the title bar. Therefore you have to click with the left mouse button on any place of the title bar and move the mouse while keeping the mouse button pressed. If you cannot reach parts of the window, because the title bar borders to the top of the screen you can use the combination of alt and left mouse button on any place of the window and move the window by moving the mouse. Another possibility is to use the desktop grid effect or the pager to move the window. The useraction menu offers the possibility to move the window as well. In that case you can move the window by just moving the mouse without pressing a key or mouse button. The moving ends as soon as there is an event such as a mouse click or enter key. A window can be hidden by clicking the minimize button. This is by default the third button from the right in the title bar. The window can be minimized as well by clicking the entry in the tasks applet or by using the useraction menu. The window can be unminimized via walk through windows (alt+tab) or via the entry in the tasks applet. If compositing is activated the (un)minimizing will be animated. The function shade reduces a window to the title bar. By default this function is only available via the useraction menu. Since KDE 4.2 there is a button available which can be added to Oxygen/Ozone window decoration. Keep window above/below others KWin is able to keep a window always above/below all other windows. That is, there is a window which always covers other windows or is always covered by other windows, no matter which window is the active one. The option can be find in the submenu "Advanced" of the useraction menu. Move window to different desktop It is possible to move single windows to different virtual desktops. Therefore there is a submenu "To desktop" in the useraction menu containing an entry for each desktop and one for keeping the window on all desktops. If active desktop borders are activated the window can be moved to a different desktop by just moving the window to the border of the screen. It is also possible to move a window to a different desktop by moving its pictograph in the pager or using the desktop grid effect. Walk through windows Via shortcut alt+tab or alt+shift+tab you can walk through the window list. By pressing the tab key again the next entry in the list will be selected. You can even use your mouse to select an item in the list. This is even possible in animated effects like CoverSwitch. If compositing is activated by default the boxswitch effect is used to animate walk through windows. This effect displays window thumbnails instead of a window list. There are more effects available and it is also possible to deselect the effect at all.

<urn:uuid:7d9fb6e2-e487-40db-ae0f-50e430d8187f>

CC-MAIN-2024-10

https://userbase.kde.org/User:Mgraesslin/KWin

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Learn and Stay Informed Watch the UU Falmouth Whole Life Learning Program Videos on the Cape Cod Climate Emergency and Eco-Justice: YouTube Video Links to the Eight Seminars of the Cape Cod Climate Emergency and Eco-Justice Series: - The Cape Cod Climate Emergency and Eco-Justice Seminar Series: Introduction (Co-sponsored by UU Falmouth’s Whole Life Learning Program a nd Social and Environmental Action Committee and St. Barnabas Church of Falmouth’s Outreach): Introduction - Cape Cod’s climate emergency reality and opportunities for change: Best practices and progress (Cape Cod Commission, Cape Cod Climate Collaborative, and the Association to Preserve Cape Cod): Climate Emergency - How to have the greatest impact on the climate emergency and Eco-injustice: Local priorities, your values, passions, competencies, and resources and how to apply them individual, with others, as a community, and on a wider scale: - Fossil free at home, on the road, and beyond: Heating, solar, vehicles, and Eco-justice traveling: Eco-Justice Traveling - The ins and outs of an Eco-justice life style on Cape Cod: Consumption, eating, and disposing for earth and Eco-justice: Eco-justice Lifestyle - How to transition your investment portfolio for the climate, the environment, and Eco-justice: Investments - Bringing back native plants, species, and Eco-systems to Cape Cod: Native Plants - Supporting youth in climate and eco-justice leadership and action: Mass Audubon’s Wellfleet Bay Wildlife Sanctuary youth leaders, and education coordinator, a high school teacher, social worker, faith community leader, and leaders of the Faith Communities Environmental Network: Supporting Youth GOOD NEWS: ALL Cape residents have all-renewable electricity from NextEra through Cape Light Compact Click here to view the recent Climate Change Vulnerability Assessment and Adaptation Planning Presentation after flooding events. Clicking on the link will download the document to your computer. The Boston Globe has created a powerful new app “At the Edge of a Warming World” describing the past and present Cape and what climate change has done.

<urn:uuid:6da26a67-f311-4f59-b54d-45ea5fd6d2fe>

CC-MAIN-2024-10

https://uuffm.org/justice-environmental-justice-climate-justice-food-security/resources/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

State of the Art of Strategic Planning for Parks, Recreation and Tourism in Ontario Municipalities. Submission to the journal of Leisure entitled: The State of the Art of Parks, Recreation and Tourism Planning in Ontario Municipalities. Co-author on a paper recently presented to the Northeastern Recreation Research Conference held in Bolton Landing in New York State in April 2007. Attendance at the conference gave Amber an excellent introduction to recreation research at a professional level. Researcher: Paul Eagles Measurement of Aging Anxiety in both Canadian and American Samples. Investigating differences in aging anxiety between Canadian and US population samples and determining whether the current AAS aging anxiety scale proposed by Lasher et al (1993) should be revised to include a 5th dimension: Healthcare and Financial Concerns. Researcher: Kelly Anthony Body Image and Disordered Eating in Models and Undergraduates. Comparison between female professional models’ and non-models’ eating behaviours, exercise behaviours, and self-esteem. Researcher: Kelly Anthony Joel Emery and Susan McElhinney Development of Clinical Assessment Protocols for the interRAI ID Assessment Instrument. Individuals living with intellectual disabilities is challenging and society plays an important role in enhancing their quality of life, especially older adults who may need health care and little contact with health care professionals. Researching Assessment Protocols (Abuse by Others, Nutrition and Obesity, Communication, and Stigmatizing Behaviour. Researcher: Lynn Martin I’m Still Here Evaluation Murray Alzheimer Research and Education Program (MAREP). Analysis and qualitative and quantitative research improving quality of life of persons living with dementia and their family partners in care in conjunction with the launch of the DVD “I’m Still Here” and “A Changing Melody” forum for people with dementia and their caregivers and partners in care an opportunity to learn from each other. It is hoped that a tool-kit will be developed to help staff and professionals implement forums in their own communities. Researcher: Sherry Dupuis School Feedback Project Assistant. The project “School Health Action, Planning and evaluation System” (SHAPES) is a data collection and feedback system designed to support population-based intervention planning, evaluation, and field research related to youth. Researcher: Steve Brown An Examination of the Roles and Responsibilities of Occupational Health and Safety Managers. Examination of the literature on the roles and responsibilities of Occupational Health and Safety (OHS) Managers. Researcher: Nancy Theberge

<urn:uuid:a6e0a11c-fe23-45a1-ba3d-d9a12cda9900>

CC-MAIN-2024-10

https://uwaterloo.ca/health/faculty-staff/research-funding/hallman-undergraduate-research-fellowship/winter-2007-hallman

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

A new anthology on youth and digital media contains a chapter on the News Evaluator. The open access book is funded by the Nordic Council of Ministers, and includes contributions from Denmark, Estonia, Finland Norway and Sweden. The chapter is titled The News Evaluator. Evidence-based innovations to promote digital civic literacy. In the News Evaluator project, Uppsala University, RISE Interactive and VA work together to develop a tool for teaching digital source criticism in schools. In the News Evaluator Election Special, thousands of teenagers helped out by assessing the credibility of political news in their digital newsfeeds during the week leading up to the Swedish general elections in September 2018. The anthology Youth and News in a Digital Media Environment – Nordic-Baltic Perspectives is funded by the Nordic Council of Ministers and is published by Nordicom, Nordic Information Centre for Media and Communication Research. Find out more and download the book here.

<urn:uuid:505a278d-cf8f-444a-8adb-d303d19f60ad>

CC-MAIN-2024-10

https://v-a.se/2018/12/the-news-evaluator-in-new-book-on-youth-and-digital-news/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Advocates for Highway & Auto Safety, as well as other safety groups, are urging states to implement more highway safety laws. Among those states is Indiana, which, according to a new national report, is lagging when it comes to preventing fatal traffic accidents. Motorcycle helmet laws One law the Hoosier state hasn’t implemented is all-rider motorcycle helmet laws. Only riders under age 18 and those with learner’s permits must wear helmets. In 2017, Indiana had a total of 3,131 motorcycle collisions and 144 deaths – up from 100 deaths in 2016. Approximately 89 of the riders who were killed were reportedly not wearing helmets. According to the Centers for Disease Control and Prevention (CDC), the most effective method for preventing motorcycle deaths is for states to implement universal helmet laws. Moreover, the CDC estimates that helmets saved 1,859 lives, and could have saved another 802 lives, in 2016. Helmets have the potential to reduce the risk of a head injury by 69 percent and the risk of death by 37 percent. Restrictions for teen drivers Indiana also doesn’t implement Graduated Driver Licensing (GDL) laws protecting teenage drivers and other road users. These laws include: - Minimum age to obtain a learner’s permit at 16 - Minimum age to obtain an unrestricted license at 18 - Stronger restrictions for driving at night According to the National Safety Council (NSC) roughly half of all teen drivers will be involved in at least one traffic accident before graduating high school. This is primarily due to inexperience and mistakes made while learning how to navigate different roadways and adjust to various situations. Child safety laws Also missing from the books in Indiana are two crucial laws that protect young children: - Requiring children to be seated in rear-facing car seats until age 2 - Requiring booster seats Rear-facing car seats protect children under age 2 by supporting the head, neck and spine and absorbing crash force in a way that minimizes the likelihood of death by five times. Safe Seats 4 Kids suggests keeping children rear-facing at least until age 2 in order to prevent head, neck, and/or spinal cord injuries in a collision. Young children who have outgrown rear-facing seats should also be placed in booster seats until they reach 4 feet 9 inches and within the age range of 8 to 12. This is because most children won’t fit into seat belts without a booster seat. Ignition interlocks for DUI offenders When someone gets behind the wheel after having too much to drink, they often put others’ lives at risk. In 2017, the United States saw a total of 10,874 traffic fatalities caused by drunk driving. Approximately 220 people lost their lives that year in Indiana. While police do their best to keep convicted drunk drivers off Indiana roads, some of these drivers may end up reoffending. This is because the state doesn’t have a law in place requiring DUI/OWI offenders to install ignition interlock devices in their vehicles after the first offense. This law applies only after an offender is arrested a second time – putting potentially more lives at risk. When the law can’t protect you, our attorneys can help Whether or not these traffic safety laws will be implemented in Indiana, drivers still have a responsibility to drive safely. If you or a loved one was injured in a crash due to someone else’s negligence, you need a knowledgeable and highly skilled auto accident attorney on your side. Look no further than Vaughan & Vaughan, located in Lafayette. Contact us today for your free, no-obligation case evaluation.

<urn:uuid:d4716dfa-2b08-429a-8b99-d491afa048fc>

CC-MAIN-2024-10

https://vaughanandvaughan.com/blog/lack-of-traffic-safety-laws/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Updated June 2023 If you’re a vegan teen who wants to attend summer camp but are worried you won’t find food options there, then this guide may surprise you! Vegan teens have two basic choices exist when it comes to summer camps: (1) Attend a known vegan or vegan-friendly summer camp. (2) See if you can obtain vegan food accommodations at a regular nonvegan summer camp. Thanks to the growing popularity of veganism, regular camps are much more likely now to advertise their ability to accommodate vegan campers than they did when VeganTeen first compiled this list back in 2016! Some new ones are listed at the end of this post. Option #1: Getting Vegan Food Accommodations at Regular Summer Camp I have found many times that regular, non-vegan summer camp staff are surprisingly vegan-friendly. Frankly, this surprised me, because I attended camps in Oklahoma, Arkansas and Texas! Here’s some steps for maximizing success, based on my personal experience. Before you go - Call or email to ask if the camp offers vegan options. (Even if they answer no, you’re showing interest and making it more likely they’ll offer vegan options in the future!) - If they say no, explain that you’re vegan and ask if you could speak with the kitchen staff about possible meal planning accommodations before enrolling in camp. - Don’t expect staff to fully cater to you. Instead, ask the kitchen staff member you speak with if you can bring vegan alternatives for meals when no vegan option would normally be available. Most camps plan menus in advance, so staff can tell you when a vegan alternative isn’t available. For example, if they aren’t planning to have soy or nut milk, ask if the kitchen would store a box of it in their fridge for you. If they’re planning on burgers one night, ask if they could they cook a veggie burger for you if you bring some frozen ones. Yes, bringing your own food adds to the cost of the camp for you, but you can consider it a charitable donation to the animals. You have an opportunity to show that vegan teenagers are healthy and eat yummy food. You’re also showing that eating vegan can happen with a few simple food substitutions. While you’re there - Express appreciation to the kitchen staff, because camps don’t usually pay them very well. You’re asking them to make extra efforts that they wouldn’t otherwise make. - Be polite and express gratitude, but don’t hold back telling the kitchen staff what you need. They deal with other special requests, too, like camper allergies. Your needs are also important. You may not die from eating nonvegan food like a camper with a nut allergy could die from eating nuts, but animals are suffering and dying to make nonvegan foods. - Don’t expect anyone else to turn vegan because of you, but know that you’re planting seeds in others’ minds. You’re making veganism a little more normal and showing that animal-based foods aren’t necessary. Some people will become more open to the possibility of going vegan in the future because of your example. Some need to be exposed to veganism several times before deciding to go vegan. You can provide one of those times! After camp is over - When camp is over, thank the camp director(s) for allowing their kitchen staff to accommodate your diet. Compliment any ways the kitchen staff went the extra mile. At three different nonvegan camps I attended, the kitchen staff surprised me by making special foods for me. I thanked the camp directors in hopes they would give the kitchen staff a pat on the back. I also wanted the directors to feel open to accommodating more vegan campers in the future. Of course, I cannot guarantee a 100% positive response. Only one of the six nonvegan camps I attended expressed unfriendliness about accommodating my vegan diet. The director of an Audubon Society camp talked about how their animal products are “humanely raised,” and she asked my mom if I would feel bad not eating like all the other kids! Nonetheless, their kitchen staff were wonderful in providing me with the vegan alternatives I brought. They even surprised me with a special vegan treat for Sunday brunch that they made just for me! That said, an Audubon Camp in Massachusetts now lists its ability to accommodate vegan campers right on its website, so things definitely are improving! Option #2: Attend A Known Vegan or Vegan-Friendly Summer Camp Of course, attending a known vegan or vegan-friendly summer camp is even easier than arranging accommodation at a nonvegan camp. YEA Camp (US)—Youth Empowered Action (YEA) Camp is an all-vegan summer camp for teens with locations in Massachusetts, California and New York. I attended and loved it! You can read about my experience here. YEA’s mission is to run “life-changing, ridiculously fun and inspiring camps across the country for progressive teens who want to do something about the problems they see in our world.” YEA serves only vegan food, but you don’t have to be vegan to attend. If you are vegan, though, rest assured that you will have vegan company during your stay! Check out their website here, and be sure to see their sample menu and food pictures here, at the bottom of their page. Campers ages 12-17 can attend (although possibly as young as 11, if you get special approval) Ridge 2 River Animal Haven (R2R)—R2R is running their first-ever summer camps this season in central Washington State in Summer 2023! Camp Compassion is for children ages 9-12, and Camp Solutionary is for ages 12-16 from July 10th-14th. Vegan Surf Camp (France)—Vegan Surf Camp is not a teenager-only camp, and underaged people have to be accompanied by an adult. However, a camp spokesperson states that many teenagers are at the camp and love the atmosphere. Be sure to check out the Vegetarian Resource Group’s list of vegetarian and/or veg-friendly camps here. Some new vegan-friendly camps since VRG published their guide in 2011 are: Stomping Ground, “an overnight camp dedicated to empathy, self-direction, and possibility located in the Catskill Mountains outside of Binghamton, New York” Gold Arrow Camp, a traditional summer camp for boys and girls ages 6-14 located on Huntington Lake in California Mountain Camp, a traditional co-ed summer resident camp near Lake Tahoe for campers entering 2nd-12th grades Camp Zeke, an overnight camp where kids celebrate healthy living through fitness, cooking (a vegan option is available at every meal), sports, farm-to-table gourmet food, and joyful Judaism, located in Lakewood, Pennsylvania Camp Takodah, an overnight YMCA camp in Richmond, New Hampshire Pali Adventures, “the best vegan-friendly summer camp in Southern California,” where they “serve vegan and vegetarian foods as part of … everyday choices. No camper is singled out for dietary shaming. After all, does anyone really notice if the carrot cake is 100% animal product-free?” Tall Timber Ranch provides “people of all ages unique opportunities where they may deepen relationships, discover God’s creation, and imagine together a better world.” Located in Leavenworth, Washington, they are inclusive of everyone, regardless of “race, ethnicity, religion, neurodiversity, citizenship, sexual orientation, and gender identity.” Keep in mind that you should always check with any camp you’re considering in order to make sure they still offer vegan-friendly meals and snacks.

<urn:uuid:9f2b6f0d-aa8d-4946-97c9-277d1ed77f4f>

CC-MAIN-2024-10

https://veganteen.net/vegan-teen-summer-camp-guide/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

b. 27/09/1922 Norkoping, Sweden. d. 10/11/1941 Calgary, Canada. DATE AND PLACE OF GC ACTION: 10/11/1941 Calgary, Canada. Karl Mander Gravell (1922-1941) was born in Norrkoping, Sweden on 27th September 1922, the son of Carl Helge and Anna Lisa Gravell (nee Schwarz). His mother was Canadian, having been born in Vancouver, British Columbia. Karl began his school career in Sweden, before his family emigrated to Canada in 1937 when he was 15. Karl then attended Kitslano High School before completing his studies at King Edward High School in 1940. Karl had always been an enthusiast of aircraft and he joined the Royal Canadian Air Force on 15th March 1941. After completing his depot training, he was posted to No 2 Wireless School in Calgary, Alberta. Frequently in trouble with the authorities for such offences as “Conduct to the prejudice of good order and Air Force discipline in that he concealed himself, well knowing the Air Force authorities were searching for him” and “smoking in an unauthorized place”. Karl had very little flying experience before the incident for which he is remembered. On 10th November 1941 at Calgary, Alberta, his Tiger Moth’s engine cut out and the aircraft crashed into the yard of the Big Hills Springs School. The fuel tank exploded on impact. Gravell managed to get clear but lost an eye and his clothes were on fire; nevertheless, without any thought for his own safety, he rushed back to the blazing wreck and tried to pull the pilot, Flying Officer James Robinson, from the wreckage. Mrs Frances Walsh, a teacher, grabbed Gravell from behind and hauled him to the ground, rolling him over to put out the fire in his clothes. She called to her pupils for help. They carried the unconscious Gravell into the school where Mrs Walsh gave first aid and sent for a doctor. When medical help arrived, she didnt allow them to treat her burns before helping Gravell. Sadly Karl died of his injuries and was posthumously awarded the George Cross on 5th June 1942. Frances Walsh was awarded the George Medal for her actions in trying to save his life. Karl’s body was taken back to Vancouver, where his parents lived, and he was buried in Mountain View Cemetery. His medals including his GC, Canadian Volunteer Service Medal and War Medal 1939-45 are held at the 1 Wing Regimental HQ, Winnipeg, Manitoba. LOCATION OF MEDAL: 1 WING RHQ, WINNIPEG, CANADA. BURIAL PLACE: MOUNTAIN VIEW CEMETERY, VANCOUVER, CANADA. Abray. Block 4. Plot 7. Lot 2. Kevin Brazier – Cemetery Map.

<urn:uuid:c75be138-1a93-4419-9111-9546f3d67780>

CC-MAIN-2024-10

https://victoriacrossonline.co.uk/karl-mander-gravell-gc-direct-recipient/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

A policeman inspects fire safety equipment in a karaoke bar in Cần Thơ City. Many businesses said current regulations on fire safety were too much for them. — VNA/VNS Photo Many businesses have had enough of overly restrictive regulations on fire safety, and the clamour for a relaxation of the regulations is growing louder. Nguyễn Đỗ Tùng Cương, chairman of the Vietnam Fire & Rescue Association, said over 230 businesses aired grievances to his association in March against fire safety regulations. The situation was also well depicted in the Provincial Competitiveness Index Survey, in which requirements related to fire prevention and fighting were among the four most-troublesome obstacles to businesses. Nguyễn Hữu Thập, chairman of the Business Association of Tuyên Quang Province, said the current regulations on fire safety entail high compliance costs for businesses. He took Decree No.136 as an example, which requires businesses to have certain fireproof facilities to be certified as compliant. Some facilities are costly, making it impossible to follow the rules for those in weak financial positions. "Fireproof elevator shaft gates can cost businesses up to VNĐ1 billion, an unnecessary cost created by unnecessarily restrictive regulations," said Thập. He said many entrepreneurs had to cease operations owing to the unforeseen costs incurred by fire safety regulations. He called for the abolition of such "costly" regulations to bring them back to life. Nguyễn Thị Thu Liên, a representative of the Association of Food Transparency, believed that it is unnecessary, under current fire safety regulations, to require shelves of 5.5m and above to follow a specific set of technical requirements. She also said it is duplicative to require businesses that have moved from one sector to another to re-apply for fire safety certification once they were certified for the first sector. "A certified textile company that has transformed into a fruit exporter should be spared the ordeal of re-applying for fire safety certification," said Liên. Nguyễn Hồng Hải, a presentative of the Vietnam Ship Agents, Brokers, and Maritime Services Providers Association, said firefighting vessels and vehicles had become mandatory for port-management companies under current fire safety regulations. The requirement for the facilities, which normally need hundreds of billions of đồng to build, would add to their costs and put the logistics sector at a cost disadvantage. Hải called for the abolition of that specific requirement to improve the competitive position of port-management companies. Voices of the business sector have been heard by the Government, which has requested Vietnam Fire Koand Rescue Police Department take measures to untangle the issue. Around 10,000 businesses have been helped so far in this regard. And the good news doesn't stop there. The Ministry of Public Security and the Ministry of Justice are drafting revisions to Decree No.136 to lessen its compliance burden on businesses. The revised version is expected to be made public in August. The Ministry of Public Security is also urging the Government to revise the Law on Fire Prevention and Fire Fighting to make fire safety regulations more tolerable and less costly for the business sector. — VNS

<urn:uuid:6ae0c220-cfec-4c4a-9852-3675cb567324>

CC-MAIN-2024-10

https://vietnamnet.vn/en/fire-safety-regulations-too-much-for-business-sector-2171257.html

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Design for Durability Designed for long use Ninety percent of PVC applications are designed for medium or long-term use. PVC is resistant to weathering, chemical rotting, corrosion, shock and abrasion. In a recent study, PVC pipe that had been buried in Australian soils for 30 years was exhumed and its condition tested. It was found to be in excellent condition (CSIRO, 2000, Long-term performance of PVC pressure pipes). The Water Services Association of Australia's (WSAA) Sewer Drain Code gives PVC a Category A rating, signifying a life expectancy of over 100 years. WSAA also gives PVC a Category A rating for water reticulation. In other applications, such as window profiles and cable insulation, studies indicate that over 60% of products will last longer than 40 years. New innovative vinyl formwork wall construction systems have a building design life of 200 years. Strength and light weight PVC's abrasion resistance, light weight, good mechanical strength and toughness are key technical advantages for its use in building and construction applications. Its applicability for light weight structures such as roofing, is especially suited to building in Australia's tropical zone. It can also be made scratch resistant, sunlight resistant and of almost any colour. Rigid PVC is inherently difficult to ignite because of the chlorine from which the polymer is made. It stops burning once the source of heat is removed. Compared with other common plastic, PVC performs well in terms of: - Lower combustibility - Lower flammability - Less flame propagation - Less heat release The natural fire resistance of flexible PVC may be reduced by the additives which are blended with the resin to make PVC flexible, but this, in turn, may be offset by the inclusion of flame retardants. Newly developed, fire retardant PVC formulations (FR-PVC) have significant advantages in terms of lower acid emissions, smoke generation and enhanced fire resistance. For more information, visit PVC & Fire section.

<urn:uuid:a0613782-3a89-4b68-ba4d-9ac66194d305>

CC-MAIN-2024-10

https://vinyl.org.au/design-benefits/design-for-durability

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

By Son Kim Assistive Technology (AT) may be used by anyone with a visual impairment. Whether someone is 7 or 97, AT makes everyday tasks easily accessible for people from all different walks of life. Below, you will find examples of how AT is commonly used. Keep in mind that each individual’s needs are different, and therefore, devices used varies greatly from person to person. Below are real world examples of individuals using Assistive Technology on a daily basis. For some, keeping up with sighted peers in and out of the classroom seems daunting. However, when matched with the correct AT, visually impaired students can thrive in school, no matter their age or area of study. Christopher is 19. His musical talents and interest in producing audio projects led him to major in Audio Engineering. He utilizes a Closed Circuit Television (CCTV), an AT device that magnifies what is on the board, displaying it on an easy to view screen. Christopher uses this device to follow the notes written on the board, as well as to enlarge printed handouts distributed during class. In addition, Christopher must often complete audio projects outside of class. To do this, he relies on a computer with a built in screen magnifier. Through his successful use of AT, Christopher is ranked in the top 10% of his major. Ana loves education and has always wanted to be a psychology Professor, with the goal of obtaining her Doctorate before she turned 30. Unfortunately, Ana unexpectedly lost all of her vision in the middle of pursuing that Doctorate degree. Ana’s confidence plummeted; she could not imagine preparing and defending a Doctoral Thesis without being able to see, much less grade papers and continue to effectively teach her students. After connecting with Vista Center, Ana received Assistive Technology Training. She learned to use JAWS, a popular screen reading software on a computer. This allowed her to continue writing papers and communicating with others. Furthermore, Ana received a scanner and Optical Character Recognition (OCR) software. OCR software allows scanned documents to be recognized and read, in this case using a screen reader. Ana is able to read and provide feedback on assignments from her students. As a result, Ana rediscovered her confidence, and she graduated with a Doctorate 2 years later, securing a teaching opportunity at a university not long after graduation. Creating, sharing, and editing documents is a day to day occurrence for most professionals. Responding quickly to urgent emails is essential, as is being organized. Through the use of AT, blind professionals can accomplish all of these tasks and more. Arielle is a successful grant writer for a local nonprofit organization. Arielle uses a screen magnifier, as well as a screen reader because her eyes tire quickly. In addition to a computer, Arielle uses an iPad with a wireless keyboard, enabling her to keep up with emails and documents on the go. Finally, during meetings, Arielle uses a talking digital recorder, enabling her to review the meeting later if necessary. Ronan works as a receptionist in a law office. He loves communicating with others and had immense customer service experience when applying for the job. However, his employer was concerned that Ronan’s blindness would inhibit him from performing all of the job’s duties. Since Ronan was proficient in using his AT devices, he was able to explain why this would not be the case. At work, Ronan utilizes a Braille note taker to access lists of phone extensions, email inquiries, and other necessary documents. Ronan also records all appointments in the office calendar using a screen reader installed on his office computer. Due to his great job performance, Ronan received a raise after being on the job for only 8 months. A loss of vision to a senior is a very scary reality. AT is not just for those at work or school. With the correct AT and training, Seniors coping with vision loss can live productive, satisfying lives. Prior to his vision loss, Don spent much of his retirement with his 5 grandchildren. Don wanted to continue being an involved grandparent, despite his loss of vision. As a result, Don turned to AT training to ensure that he received the technology to best fit his needs. Don’ was trained to use Talkback on his smartphone. This allows Don to coordinate transportation to family events and keep up with the endless pictures of his grandkids on social media. Furthermore, Don now uses a Braille display. This allows Don to continue his hobbies of reading and writing. Don now volunteers his services to help other blind seniors use their AT devices effectively. Assistive Technology is an essential tool. Whether a client is in the workforce, in school, or in another stage of life, AT ensures that daily tasks are accessible. This productivity leads to a more fulfilling and satisfying life.

<urn:uuid:747e83c1-c2c3-404b-b3fd-41829d73a9a6>

CC-MAIN-2024-10

https://vistacenter.org/author/bethany/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Before continuing with Book Two of Laws, there is a major theme in Book One that I ought to have included in the previous post as a significant point in common with one of the primary biblical themes. Both Plato and God emphatically stress the importance of testing the character of their people. The purpose of this test is to produce citizens worthy of the new state or kingdom. They will demonstrate their purity of character by obedience to the laws, living a holy life and hating everything that is against “nature”, “wisdom” or a “noble spirit”. Plato speaks of several ways people need to be tested for character so they can learn self-control and master their base passions and so become worthy citizens. Worthy citizens must learn to overcome unhealthy fear and the temptations of pleasures. For you are the only people known to us, whether Greek or barbarian, whom the legislator commanded to eschew all great pleasures and amusements and never to touch them; whereas in the matter of pains or fears which we have just been discussing, he thought that they who from infancy had always avoided pains and fears and sorrows, when they were compelled to face them would run away from those who were hardened in them, and would become their subjects. Now the legislator ought to have considered that this was equally true of pleasure; he should have said to himself, that if our citizens are from their youth upward unacquainted with the greatest pleasures, and unused to endure amid the temptations of pleasure, and are not disciplined to refrain from all things evil, the sweet feeling of pleasure will overcome them just as fear would overcome the former class; and in another, and even a worse manner, they will be the slaves of those who are able to endure amid pleasures, and have had the opportunity of enjoying them, they being often the worst of mankind. One half of their souls will be a slave, the other half free; and they will not be worthy to be called in the true sense men and freemen. . . . One is reminded here of Herodotus’s infamously curious line that concludes his Histories: and [the Persians] chose rather to dwell on poor land and be rulers, than to sow crops in a level plain and be slaves to others. Recall from the previous post the same theme of healthy and unhealthy fears that Plato spoke of through his characters. Note the last line of the following extract: the ideal legislators must bring their people to face many fears to learn to have the right kind of fear — which is the same dialogue explains is reverence, or fear of God. Continue reading “Plato’s template for the Bible”

<urn:uuid:d7ff6cb9-00d2-4b37-a2dd-462e21da6c22>

CC-MAIN-2024-10

https://vridar.org/2012/09/16/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Originally opened in 2006 on one acre of property, recent reviews list this dog park as closed for renovations. A volunteer group known as the Friends of Rebel's Dog Park are currently seeking donations and assistance to help rebuild the park for a future re-opening of the space. Rebel's Dog Park provides water on-site to help ensure that Fido and his friends remain hydrated during their visit to the park. In addition to this, benches are situated throughout the property in shaded areas to ensure respite from the hot sun for owners while they supervise their dogs at play. While there are few rules regarding the use of the play areas, Rebel's Dog Park officials do reserve the park space for use by altered dogs only. Though not specifically listed, it is wise for all dogs to be current on vaccinations and to bear the appropriate required state license tag. It is unknown if poop bags are provided on-site. However, it is required that all owners carry bags with them and assist with cleaning up and properly disposing of their dog's waste materials in the provided trash receptacles. There are no bathroom facilities available on the premises for public use. The Friends of Rebel's Dog Park are hard at work with many different fundraising initiatives to see this park restored to its former glory. For parties interested in assisting with their efforts, information is available by contacting the Humane Society of Harford County directly. For owners of altered dogs seeking a fun off-leash play space to enjoy, keep your eyes open for the grand re-opening of Rebel's Dog Park!

<urn:uuid:88603c00-26ac-4a3a-b4ea-5419a3082cbd>

CC-MAIN-2024-10

https://wagwalking.com/lifestyle/parks/rebels-dog-park

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Amongst the many interactions on the Walk for Arcause, some of the insightful discussions have been the ‘Mera Ghar’ and ‘Chai pe Charcha’ sessions. In these sessions Ar. Gita discusses common building practices and simple things locals need to take into consideration while building their own house. In more than six such sessions, an important topic discussed with the people was regarding the reinforcement bars used in the construction. On questioning the local people, it was found that many use reinforcement bars of 600 SD, especially for their high strength. However, the 600 SD and above re-bars are used for high-rise constructions while 550 SD is optimum for the strength and resistance against vibrations caused by the presence of a railway line in the vicinity or due to the passing of heavy vehicles on highways and flyovers and thereby is an ideal choice for Individual Home Builders (IHB). Through the ‘Mera Ghar’ presentation, the locals were informed about the features of the TATA Tiscon reinforcement bars and their usage. The TATA Tiscon 550 SD are high-strength reinforcement bars, designed specially to give consistent strength. These bars are manufactured from virgin iron and pure steel. The ribs of the re-bars are designed to have increased bonding with the concrete thereby preventing cracks. Hence, they increase structural load carrying capacity and the lifespan of the building, whilst reducing the cracks in buildings. Homes built using TATA Steel are designed to last up to 30-50 years. They also help optimise the need for steel requirements in buildings and ensure up to 6% of monetary savings on steel reinforcement. The TATA 550 SD is recommended in earthquake zones due to its high strength and ductility and also in coastal areas due to its corrosion-resistant properties. Besides, being Earthquake resistant, the 550 SD re-bars also provide strength to withstand the vibrations caused due by the presence of a railway line in the vicinity or due to the passing of heavy vehicles on highways and flyovers. They can also be used in factories and are capable of withstanding gas emissions. These reinforcement bars are available in diameters ranging from 6mm to 40mm. Set up in 1907, TATA Steel has come a long way, and today is one of the most used Steel brands in building constructions across the country. Launched in 2000, the TATA Tiscon, a sub-group of TATAs successfully manufactured India’s first TMT Re-bar with technological support from the USA. It remains India’s only Re-bar Superbrand and has grown today to a large network of over 6800 dealers across the country and is today the most-well known re-bar brand. With a large variety of specifications of reinforcement bars, the TATA Tiscon re-bars provide ductility, high strength and also help minimise the quantity of steel required. As of today six formal sessions and five informal sessions have been conducted and we have been able to reach out to over 200 people and converse with them to spread awareness on the TATA Steel 550SD.

<urn:uuid:ca8cd823-a8f2-4b52-bdd7-75d6929c7703>

CC-MAIN-2024-10

https://walkforarcause.com/2022/03/14/building-stronger-with-tata-tiscon-550/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

With the aging of tunnels, additional maintenance and assessment procedures are required to monitor their working conditions. The passive thermal infrared method, which is a nondestructive contact-free method, is used to find defects in a box-type and shield tunnels with concrete lining. In this study, this method is numerically applied to detect defects in an unhealthy concrete structure. The thermal field data measurements are reviewed and the governing heat transfer mechanisms for a defected concrete surface are presented. The heat transfer in the concrete segment, tunnel air, and the air inside the void due to the conduction, convection, and radiation mechanisms is explained. Further, the type of cavity, the temperature difference between the healthy and unhealthy concrete surfaces, the temperature difference between the tunnel air and concrete surfaces, and the influence of the void depth on the detection accuracy are investigated. The results show that the temperature difference between the concrete surface and the tunnel air is more than 0.35 °C, which is an ideal condition for detecting the voids with an approximate depth of 30 mm or less. ASJC Scopus subject areas

<urn:uuid:96cc2ffb-fafd-49a2-9e83-27e366b04dd7>

CC-MAIN-2024-10

https://waseda.elsevierpure.com/ja/publications/study-of-infrared-thermal-application-for-detecting-defects-withi

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

By Kylee Dawson EVAN CARAVELLI/ARIZONA DAILY WILDCAT Creative writing graduate student Jason Zuzga arranges a memorial display honoring those who lost their lives while crossing the U.S.-Mexico border. The display, "SpeakWater: Regando La Frontera," is an installation created by students from Zuzga's Audio/Visual Poetry class and officially opens to the public at the Poetry Center tomorrow evening. Arizona Daily Wildcat Wednesday, November 10, 2004 'SpeakWater' speaks for those who cannot Emily Dickinson wrote, "Water, is taught by thirst." In the desert, everyone can relate to those words. To memorialize those who've lost their lives while crossing the U.S.-Mexico border, members of a Poetry Center class have created an installation that fuses poetry, art and spirituality. "SpeakWater: Regando La Frontera" is the first installation from a class or workshop to be displayed at the Poetry Center, said Gail Browne, director of the Poetry Center. The class, "Poetry: Audio/Visual," consisted of undergraduate and graduate students, and other members of the Tucson community including UA alumna Kimi Eisele, a local writer and dancer. The class met every Monday from Sept. 13 to Oct. 18 from 6 to 8 p.m. All the assignments from the class led up to the installation, which students conceptualized and created so visitors and readers could experience "spatially off the page," instructor Jason Zuzga said. "I'm interested in expanding the idea of what poetry can be," Zuzga said. "(By) having students engage with words as material objects, both sonically and physically, we created poems with multiple voices to be spoken simultaneously, and we created animated flash poems on the Internet." Rodney Phillips, a new local poet and student from Zuzga's class, said the SpeakWater installation was inspired by Prop. 200 and the fact that many people are dying in the desert while trying to get jobs to feed their families. "This is a conceptual art piece about tolerance and words and accepting peoples' differences," Phillips said. "We tried to make it as inclusive as possible." Students selected poems that deal with the desert and water and border issues, including "Lost Prayers," a new unpublished poem by professor Ofelia Zepeda, who teaches linguistics and Tohono O'odham at the UA, Langston Hughes's "The Negro Speaks of Rivers," Pablo Neruda's "Agua Sexual" (in Spanish and English), Demetria Martinez's "Cold Shop in Tucson," and other poems. "I was really interested in the idea of water and its scarcity in the desert and how water can be a spiritual metaphor for unity and literal representation of salvation," Eisele said. "We all need it to survive. I tried to find poets' works that spoke to this urgency and need and gratitude for water." The poems, all written on pieces of duct tape, create pathways starting at the Poetry Center's exterior sidewalk and lead to a memorial altar. The altar is lined with empty picture fames, anthologies of poetry, Christmas lights and other media. Glasses of water that contain rocks with words from the poems written on them symbolize the people who died from a lack of water. "This is an offering of water to their spirits," Zuzga said. The purpose is to get people to connect with and think about the words dissolving in liquid and focus the readers' attention on he poems, he said. The pathways of poems wind through the Poetry Center library and eventually lead to a trough of water, which contains more rocks with words and a trough of sand, which contain pieces of paper with poetry. The troughs, created by cutting a water barrel in half, symbolize the water barrels that have been left for the people who cross the desert. "There are obviously political dimensions to this and we started doing it when people were voting on Prop. 200. Then we had that unfortunate outcome," Phillips said. As a recipient of a 2001-2002 Residential Fellowship in Poetry from the Fine Arts Work Center in Provincetown, Mass., Zuzga completed his MFA in Poetry at UA in May and is currently a graduate assistant in the creative writing the department. The SpeakWater installation will be officially open to the public tomorrow from 6 p.m. to 7 p.m. Refreshments will be served and students will be available to answer questions. The installation will run until Wednesday, Dec. 15. On Thursday, from 6:00 p.m. to 7:00 p.m., the installation will officially open to the public. Refreshments will be served, and students from the class will be on hand to answer questions. The Poetry Center is located at 1600 E. First St. off Cherry Avenue, and is open Monday to Thursday 9 a.m. to 8 p.m., Friday 9 a.m. to 5 p.m., and Saturday 1 p.m. to 4 p.m. Parking is free for Poetry Center guests.

<urn:uuid:d587a365-b10a-4805-8236-91e6f479666f>

CC-MAIN-2024-10

https://wc.arizona.edu/papers/98/57/04_1.html

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Article provided by AlBaraa H. Taibah I learned a lot about leadership in classes during my MBA, and afterwards, running national transformational education programs in Saudi Arabia. But my best lessons came when, while studying for an MBA, I switched Boston for the Sahara. My clean, ordered bedroom for a wooden plank in the desert and my fellow students for a herd of 164 stubborn sheep. Why? I wanted to really explore, grow and understand what truly makes a successful leader. I was convinced that the ancient art of shepherding might hold the key. Shepherding was the profession of all the great religious prophets and I pursued a journey to discover why, the hard way. What I learnt transformed me – it was possibly a crazy thing to do – but I have always been a believer in stepping outside of the classroom and actually experiencing the things you are trying to learn. Was it tough? Yes but more than anything else this experience taught me important lessons about myself, about self-reliance and about leadership. Here’s what I learnt: Lesson One: Add value In my very first minute with the flock, I tried asserting my authority out loud: “hello, I am your leader”. The response? They turned their backs to me. Each day I offered food and water, opened gates to let them pass, cleaned up their left overs. Slowly, they allowed me to get close to them. I realised it was only when I served them, repeatedly, that they began to accept me. It wasn’t about being a human, or having skills, or even being a leader. It was about bringing value to them. Thus, here is a question to ask yourself, what value do you bring to your organization and the individuals in your team? Lesson Two: Know yourself The herd’s flat-out rejection of me was not my only challenge. I was totally isolated from the modern world. No internet, no electricity, no toilet. No people. Only snakes, fear, silence and scorching desert heat. The desert is a place where you do not have the option to choose the way you live. You just live the way it is. This teaches you to adapt and to lead, no matter the situation. It also teaches you how to continue surviving and continue leading no matter how fearful you are or how hard it is to adapt to change. This requires you to build full awareness of your thoughts and emotions. I learnt this to be absolutely key to my ability to continue leading. Lesson Three: Build trust Finally, the day came where the sheep did not turn their back on me. But this wasn’t enough. I needed them to follow me, willingly and with confidence. I needed to guide them on the routes where they could find food in the desert, or they would die. It is only with continuous commitment that they start taking the path that you take and stopping when you stop. The sheep valuing me was one thing, but trust and having faith in the leader is another. Trust is essential to leadership. Without it, it is only a matter of time until the relationship collapses. Do we trust the boss who assumes he or she alone has the solution for everything, who treats people like machines or who thinks only of profit margin. Of course not – we trust the leader who cares about his staff, is humble and experienced, and who offers his or her employees the same trust and respect as he or she expects back. The Modern Shepherd: Leadership Secrets and Life Wisdom I Learned while Shepherding by AlBaraa H. Taibah is out now in paperback and ebook, priced at £4.99. About the author Top education leader and TEDx speaker AlBaraa H. Taibah left his Boston life behind, and ventured, alone, into the Sahara to see what he could learn from herding 111 stubborn sheep through a deadly desert. A profound experience, he, at 29, then became one of the youngest ever school principals in Saudi Arabia.

<urn:uuid:7f05ee33-3881-4fd7-bc52-985aeee04383>

CC-MAIN-2024-10

https://wearethecity.com/leadership-can-be-learnt-trust-me-i-learnt-the-hard-way/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

International Day of People with Disability As a part of Western's celebration of International Day of People with Disability this week, we are showcasing some of the great research taking place in the Disability space here at Western. Researchers at Western are leaders in creating meaningful research for and with people with disability. Here we feature three case study exemplars. Researchers in the School of Nursing and Midwifery have pioneered standards for practice in nursing to enhance the health and wellbeing of people who have intellectual and developmental disability and inform nursing and community expectations of this specialty area of nursing practice. Opoku, M. P., Nketsia, W., Odame, L & Agyei‐Okyere, E. (2021). Predictors of the Attitudes of Preservice Teachers Toward Teaching Students With Down Syndrome in Regular Schools in Ghana, Journal of Policy and Practice in Intellectual Disabilities Partnering with international scholars, a School of Education researcher has identified not only the attitudes of pre-service teachers towards teaching students with Down syndrome in Ghana but also the critical factors that predict these attitudes. Howie, V., Denman, D., Wilson, N.J. & Lewis, P. (2021). Standards for practice in intellectual and developmental disability nursing: A Delphi study. Collegian Finally, in close partnership with industry and community organisations, researchers from the School of Health Sciences and School of Education have established emerging evidence about the benefits and implementation of a virtual reality sensory room to improve wellbeing and sensory processing of adults with disability. These exemplars demonstrate the reach and impact of our work and we invite you to partner with our researchers. Mills, C., & Tracey, D. K. (2021). Exploring the Benefits of the Evenness Virtual Reality-Based Sensory Room If you have research you would like shared on our page, please contact us.

<urn:uuid:3e3b1239-1b59-49fc-a88b-c688d952e433>

CC-MAIN-2024-10

https://westernsydney.edu.au/equity-and-diversity/disabilities/research

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Understanding Prenatal Emotions Pregnancy is an exciting time, filled with anticipation and preparation. Yet, along with the physical changes that occur, many women also experience a whirlwind of emotional changes. These prenatal emotions, as they are commonly referred to, are normal, representing a crucial aspect of the pregnancy journey. They arise due to a combination of hormonal changes, physical discomfort, and the psychological adjustment to an upcoming life transition. The Spectrum of Prenatal Emotions Prenatal emotions cover a wide spectrum and can fluctuate significantly, often without any tangible triggers. Common emotions experienced during this time include joy, fear, excitement, worry, and even sadness. • Joy: The prospect of bringing a new life into the world can bring about immense joy and excitement. • Fear and worry: Pregnancy comes with its certain uncertainties. Concerns about the baby’s health, apprehension about the act of giving birth, or anxiety about becoming a good parent are common triggers of fear and worry during this time. • Sadness: In contrast to societal expectations of pregnancy being a time of consistent happiness, some women might experience periods of sadness and even depression. However, if these feelings persist or significantly interfere with your daily life, it is crucial to seek professional help. Hormonal Impact on Prenatal Emotions Pregnancy comes with a surge in hormones, including human chorionic gonadotropin (HCG), progesterone, and estrogen. These increased hormone levels can critically affect your mood and emotional state. For more detailed understanding, The Mayo Clinic provides an illuminating resource. Managing Prenatal Emotions As an obstetrician-gynecologist practice, we at Women’s Health Group understand the gravity of prenatal emotions and offer a holistic approach towards managing them. Given the universality of these feelings, it is essential to remember that you’re not alone, and that there exist several coping mechanisms can help navigate these emotional waves. • Maintaining physical health: Regular exercise, a balanced diet, and ample rest can go a long way in stabilizing mood and keeping emotions in check. • Emotional self-care: Understanding and acknowledging your emotions without judgment is an important step towards managing prenatal emotions. • Professional Support: Don’t hesitate to seek professional help if emotions become overwhelming or interfere with daily life. Additional resources from Women’s Health Gov offer substantive advice on navigating these emotions. Partners Role In Managing Prenatal Emotions The role of partners in managing prenatal emotions cannot be overstated. Their understanding, patience, and support are critical during this period. Encouragement to share feelings, lending a listening ear, offering reassurance, and relieving physical strain can greatly ease prenatal emotional stress. The Postnatal Phase and Emotions Prenatal emotions do not end at childbirth. Many women experience a range of postnatal emotions that can last for several weeks or even months after giving birth. Postpartum depression is a serious condition that requires immediate medical attention. If you or a loved one are experiencing significant emotional changes post-childbirth, do not hesitate to get in touch with a healthcare professional. Navigating the waves of prenatal emotions is a complex process. Understanding, accepting, and dealing with these fluctuations in mood is an integral part of the pregnancy journey. With the right tools, self-care measures, and professional guidance, these emotional waves can be managed effectively, paving the way for a healthier and happier pregnancy. Always remember that seeking help is not a sign of weakness, but an act of strength, for you and your baby’s well-being.

<urn:uuid:74c6a67c-90cf-4650-8992-a529d24ce660>

CC-MAIN-2024-10

https://whgchicago.com/navigating-the-waves-of-prenatal-emotions/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Unlocking the Secret of Prenatal Power The concept of Prenatal Power encompasses far more than physical strength. It’s about engaging both mind and body in a harmonious flow of strength, resilience, and preparation. As an esteemed Women’s Health Group and obstetrician-gynecologist based in Chicago, we’ve understood that a woman’s capacity to harness her prenatal power greatly influences not only her journey during pregnancy but also her birthing experience and postpartum recovery period. The Broad Spectrum of Prenatal Power Achieving Prenatal Power doesn’t happen overnight; it is a journey of understanding your body’s profound capabilities and empowering your mind to believe in them. Prenatal power isn’t predominantly about physical strength, but also emotional resilience, mental agility, and hormonal balance. It is beneficial for enhancing the overall health status, mitigating common pregnancy-related concerns such as discomfort or fatigue, and preparing the body for childbirth. When harnessed effectively, prenatal power has the capacity to transform the prenatal and birthing phases, setting up a conducive framework for mother and baby. Enhancing Physical Strength through Prenatal Exercise Regular prenatal exercise forms a critical part of harnessing prenatal power. It builds physical strength and stamina, enhancing the body’s endurance for the natural process of birth. It’s crucial to engage in exercises that are safe, balanced, and tailored to the unique needs of pregnant women. These may include prenatal yoga, pilates, swimming, or walking. Remember, the goal isn’t about pushing your physical limits but nurturing a harmonious balance between strength and flexibility. In addition, guidelines from professional bodies like the Mayo Clinic suggest regular prenatal exercise can alleviate common pregnancy ailments like back pain and constipation, and keep health risk factors such as gestational diabetes at bay. Boosting Emotional and Mental Health The mental and emotional aspects of Prenatal power are as important as the physical side. Stress-management strategies, meditation, mindfulness, and adequate sleep play pivotal roles in keeping emotions on an even keel and ensuring mental agility. Finding healthy outlets for expressing feelings or concerns, be it through support groups, talking to trusted friends or family members, or personal journaling, can significantly enhance emotional well-being. Furthermore, studies by the Office on Women’s Health, U.S. Department of Health & Human Services have indicated the importance of mental wellness for a positive pregnancy and childbirth experience. Nutrition: Fueling the Embodiment of Prenatal Power Nutrition is an integral part of harnessing prenatal power. A balanced diet rich in key nutrients like folic acid, iron, calcium, and protein not only fuels the growth and development of the baby but also delivers the required energy for maintaining maternal health. It is essential to stay hydrated and be mindful of meal choices, aiming for fresh, wholesome options wherever possible. A Holistic Approach: A Winning Formula Understanding Prenatal power involves integrating these aspects – physical power, emotional well-being, mental agility, and optimum nutrition. It’s about adopting a holistic approach that respects the individuality of each woman’s journey and empowers her to make choices that best suit her. This unified approach not only sets a positive precursor for childbirth but also paves the way for a healthy recovery postpartum and overall well-being. Nurturing Prenatal Power: A Continuing Journey The nurturing of Prenatal Power isn’t restricted to pregnancy or the birthing phase. It extends beyond, shaping a woman’s journey into motherhood. It’s crucial to continue the focus on self-care, maintaining physical strength, mental and emotional health, and adequate nutrition. A mother with a steady reservoir of prenatal power is better equipped to meet the challenges of new motherhood with resilience and grace. In conclusion, engaging in regular prenatal physical activity, nurturing emotional well-being, staying mentally agile, and adhering to a balanced diet significantly helps in boosting prenatal power. This potent blend of strength-building strategies, coupled with specialized and compassionate care from your healthcare provider, can make your journey through pregnancy and childbirth an empowering and fulfilling experience. As a renowned Women’s Health Group and obstetrician-gynecologist in Chicago, we are committed to guiding you through this journey, empowering you to maximize your prenatal power and make the most of this unique and transformative life phase.

<urn:uuid:87f54936-0504-4459-bdd1-a4fa32f07bcf>

CC-MAIN-2024-10

https://whgchicago.com/prenatal-power-strengthening-body-and-mind-for-birth/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

What is flat rate card pricing? Flat rate pricing for credit card processing is designed to be simple and offered without a transaction fee, which can benefit businesses with many transactions. Business owners can easily calculate their credit card processing fees with flat rate processing since the rate is the same each month. From a budgeting perspective, the flat, consistent rate appeals to business owners. However, keep in mind that flat rate credit card pricing is not necessarily the most cost-effective option. How Does Flat Rate Processing Work? When a business processes a credit card transaction, it’s paying three separate fees: - An interchange fee to the card’s issuing bank - An assessment fee to MasterCard, Visa, or Discover, and - A markup to the credit card processor. Interchange rates assigned to an individual credit card transaction range from 0.05% to 3.17%, depending on card type, card brand, processing method, and several other proprietary factors. Interchange fees and assessments are combined into a flat rate, so the merchant won’t know which interchange rate is applied. With flat fee pricing, every transaction has the same processing cost. However, your provider must cover both high-cost (corporate cards) and low-cost (debit card) transaction types, which means they will ultimately charge more for transactions that would cost less on a different plan. Flat rate credit card processing can cost between 2.75% to 3.50% and often charge between $0.20 to $0.30 per transaction. What are some of the other processing models? Interchange plus pricing, which credit card processors use to determine the per-transaction cost paid by merchants. The pricing model includes the interchange fee established by the credit card company and a markup set by the credit card processor. Interchange plus pricing is highly transparent in that all the charges are disclosed on your statement, making it harder for processors to slip in extra hidden fees. Read more about Credit Card Processing Models. Meanwhile, tiered pricing generalizes many processing rates into three basic tiers: qualified, mid-qualified, and nonqualified. Which tier a particular transaction will fall into depends on several criteria, which the credit card processor sets. Those requirements can include card-present or card-not-present transactions, whether a transaction was processed on the same day it occurred, and which category a purchased item falls into. Is Flat Rate Processing Right for You? Flat rate processing is the simplest and most straightforward option for merchants who don’t want the headache of understanding interchange fees or the uncertainty of what they will pay in processing fees each month. Flat rate processing can also be a desirable option for new businesses that don’t qualify for a merchant account, as it has a low barrier to entry. But flat rate pricing means lumping all transactions into a single fee, so merchants pay more in the end. Also, merchants may find it difficult to keep records of what methods your customers prefer to pay with , credit cards, debit cards, gift cards , because flat fee payments don’t reveal the detailed information on your statement. Flat rate processing is easy to understand, and the cost is predictable. Remember that the convenience of flat rate processing comes at a price. Choosing the proper pricing structure is an important decision. Sekure’s credit card processing experts are here to help you sort through the details to find the best fit for your business. Give us a call.

<urn:uuid:7945c95d-b29f-4beb-bbb7-4587bbc28b8d>

CC-MAIN-2024-10

https://wordpress.sekureqa.com/blog/4-things-to-know-about-flat-rate-pricing

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

One of the most vital elements of a successful skills development platform is the offer of comprehensive learning pathways. These pathways help identify the skills a learner specifically needs to focus on – a vastly more effective learning process than using a set curriculum for all learners. Learning pathways are formed by focusing on the skills within skills that someone already knows, needs to know, and will know in the future. As each broader skill branches out into more specific and granular skills, links are created that show the essential connections in knowledge to enable comprehensive and holistic learning. At Workera, we call this an ontology – but where does the term 'ontology' come from and what should it mean to the world of upskilling? The definition of an ontology For thousands of years, until a few decades ago, the term ‘ontology’ only referred to a rather esoteric field of philosophical inquiry – the study of what is, or the study of what and how things exist. More recently, the term “ontology” has been adopted by information scientists who are concerned with classifying and understanding the things that exist in a certain domain. In fact, this use of the term has gained enough currency to earn a place in our dictionaries. According to Oxford Languages, while ‘ontology’ still refers to the aforementioned branch of philosophy, when we speak of “an ontology”, or “ontologies” in the plural, we are referring to “a set of concepts and categories in a subject area or domain that shows their properties and the relations between them." “For thousands of years, until a few decades ago, the term ‘ontology’ only referred to a rather esoteric field of philosophical inquiry – the study of what is, or the study of what and how things exist.” Thus, we speak of “an ontology” for “a discipline”: anything from Machine Learning to Cat Breeding to Underwater Basket Weaving. Any discipline – also called a ‘domain’ – could have its own ontology. The taxonomy of an ontology Looking closer at the above definition, it becomes clear that we not only use ontologies to answer the question “What information is in this domain?” but also to ask “What are the relationships among the information in this domain?”. Obviously, understanding these relationships requires that we break the information down into smaller units, and classify them. In this we can see that an ontology is really a taxonomy, a comprehensive classification, of the information in a domain. One simple way of imagining an ontology is to think of a tree. A domain is like the trunk of a tree, which then splits into a few subdomains, the largest of the tree’s branches. Next, each subdomain will contain a few topics, the smaller branches, under which there may even be a few sub-topics – the smallest branches of all. For example: in our ontologies here at Workera, we include skills, the equivalent of the leaves on our ontology tree. To illustrate an ontology applied to real life, let’s use the domain ‘Automobile Mechanics’. This domain might be split into several subdomains, such as Diagnostics, Vehicle Components, and Regular Maintenance. Next come the topics – for example, under Regular Maintenance we are likely to find Oil Replenishment, as well as Air Filter, Windshield Wiper, and Tire Replacement. Finally, under the topic Tire Replacement, we will need to include the following skills: Use a Car Jack, Engage the Parking Brake, and Implement a Torque Wrench. Our complete ontology might look something like this: Why ontologies matter Ontologies provide a comprehensive map of the information in a domain, allowing us to visualize and understand a knowledge base, and its related skill set, in its entirety. It is little wonder, then, that ontologies have proven especially helpful for educators. For anyone who wishes to develop a comprehensive course of study and final exam for their students, an ontology is an invaluable resource, allowing the instructor to work systematically through each subdomain, topic, and subtopic in a given domain. By working in an orderly manner, the instructor can be sure that students will walk away having learned all the information in the ontology, and developed every skill they need to apply that information in “the real world." “The last thing a working machine learning engineer needs to do is work point-by-point through an ontology in machine learning engineering – something they're likely to already have mastered.” In the past, working professionals who wished to upskill may have enrolled in just such a comprehensive course in order to encounter a few new concepts and master a few new skills. But that’s the equivalent of a graduate-level student sitting in on a high school or college class. Frankly, in today’s high-paced work environment, no one has time for that kind of inefficiency and redundancy. The last thing a working machine learning engineer needs to do is work point-by-point through an ontology in machine learning engineering. Chances are, if someone is a machine learning engineer already, this approach would entail many precious hours listening to lectures on already mastered material. How upskilling solutions use ontologies Upskilling software allows leaders to identify the most critical portions of an ontology that a learner has yet to master, and then provide a learning pathway to fill in those gaps. In a sense, upskilling solutions enable the leader’s job to sift out all the redundant information a learner might have encountered in a comprehensive course, leaving only the few lectures that the learner would benefit from hearing. At Workera, for example, we carry out this “sifting” process by having our learners take an assessment at the outset (as opposed to a final exam at the end of a course) which enables our algorithm to make inferences about a learner’s skills based on assessment results. After identifying a learner’s areas for growth using data from the short initial assessment, we can generate a learning plan adapted to the needs of the individual. We don’t use ontologies to express what every machine learning engineer ought to know, but rather, to determine what this machine learning engineer has yet to learn. And, as it turns out, that’s a big difference. As a leader, how do you design ontologies to help upskill your team in cutting-edge knowledge? Find out how Workera’s new Skills AI innovation is transforming businesses across the world at workera.ai/skillsAI Understand. Develop. Mobilize Unlock the full potential of your workforce Learn how Workera can power digital transformation and produce measurable results across your enterprise.

<urn:uuid:ec894c8b-3345-4ae9-a7cd-5753eab1ff6a>

CC-MAIN-2024-10

https://workera.ai/test-blog/blog/introduction-to-ontologies

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Learning through competitions makes it possible to get young people excited about technical topics. Since 1991 Festo is a Global Partner and has provided state-of-the-art learning systems for WorldSkills Competitions around the world ever since. 30 years ago, the partnership at the WorldSkills Competition in Amsterdam has started. At that time, Festo was asked to design and equip a new competition discipline: Mechatronics, combining mechanics, electronics, and information technology in global manufacturing and production technology. Since then, Festo has been equipping WorldSkills for Mechatronics with its Modular Production System MPS, which is continually updated with new innovations and components, but now Festo is also active in other skills. In 2019, the skill Industry 4.0 was introduced. Festo Didactic has configurated its Cyber-Physical Learning System, the CP Lab. A learning system used to teach a wide variety of technologies in Industry 4.0. This enables the trainees to keep pace with technological progress. Water is a scarce commodity in many regions of the world. That is why Festo Didactic has supported the creation of the skill Water Technology. In this skill trainees simulate the processes of a water and wastewater treatment plant, using the modular Water Management Learning System EDS® (Environmental Discovery System). Festo looks forward to many more years of WorldSkills! Find out more Are you interested? Learn more about the numerous skills at WorldSkills: Skills | WorldSkills Find out more about the 30 year partnership between Festo and WorldSkills: Festo and WorldSkills celebrate 30 years of partnership You can also visit us on our Festo Didactic website: www.festo-didactic.com Article Submitted by Festo Didactic SE

<urn:uuid:a2e9f703-ab10-4aa5-86da-7f86835d4169>

CC-MAIN-2024-10

https://worlddidac.org/news/worldskills-learning-through-competition-2/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

PART 1 OF 5 RULES OF THE ROAD Please continue to the next page to complete your registration. DO NOT log out until you have completed this, thank you. As you make your way through the course you will see this sign: We encourage you to click on it and read the actual Vehicle Code (VC) as listed by the California Department of Motor Vehicles. There are new traffic laws passed almost every year in addition to many changes made to old traffic laws. You will find these laws throughout the reading material as you proceed through the course. However, now, we will briefly discuss the most recent changes to the traffic laws and the reasons behind them. Motorcycle Instruction Permit (VC 12804.9) – This new law requires a person under 21 years of age to complete an approved motorcycle safety course before being issued an instruction permit with which to practice operating a motorcycle, and requires the permit to be held for six months before being issued a class M motorcycle driver license. There are currently more than 6,000 drivers 19 years and younger who are licensed to ride a motorcycle in California. The popularity of motorcycles is attributed to the low initial cost, its use as a pleasure vehicle, the good fuel efficiency, and let’s face it they’re just fun to drive and ride. However, motorcycle fatalities represent approximately five percent of all highway fatalities each year, yet motorcycles represent just two percent of all registered vehicles in the United States. One of the main reasons motorcyclists are killed in collisions is because the motorcycle itself provides virtually no protection in a crash. For example, approximately 80 percent of reported motorcycle crashes result in injury or death; a comparable figure for automobiles is about 20 percent. According to the California Highway Patrol (CHP), traffic collisions are the leading cause of death for teens in America between the ages of 15-20 years old and they are involved in three times as many fatal crashes as all other drivers. Some of the causes that can be attributed to motorcycle crashes are: - lack of basic riding skills - failure to appreciate the inherent operating characteristics - failure to appreciate the limitations of the motorcycle - failure to use special precautions while riding - failure to use defensive driving techniques. - lack of specific braking and cornering skills - failure to follow speed limit The change in this law is to help reduce collisions and save lives. Attending a motorcycle rider training safety course is the best way to learn how to operate a motorcycle safely and skillfully. Rider training safety classes provide unique knowledge and skills that one may not learn if a friend teaches them how to ride. The goal is to arm California’s youth with enough knowledge to make smart driving decisions. High-Occupancy Vehicle Lanes (VC 5205.5 and 21655.9) – Prior law that permitted certain fuel-efficient, low-emission vehicles to display stickers allowing them to be operated in HOV lanes with a single occupant was to expire on January 1, 2011. The new law extended the “sunset” date for the yellow stickers for hybrid vehicles until July 1, 2011; the white stickers issued to fully-electric and compressed natural gas vehicles until January 1, 2015; and created a third sticker, for plug-in hybrid vehicles, to be issued and valid from January 1, 2012 until January 1, 2015. California Senator Leland Yee, said the goal of extending hybrid HOV access for an additional six months was to give California hybrid owners time to purchase the electric cars and plug-in hybrids that were coming to the market. Some legislators opposed the bill, saying that HOV lane access should be strictly preserved to carpools, regardless of the desire to encourage adoption of green car technology. To alleviate concerns about highway congestion from solo green car drivers, SB 353 places a cap of 40,000 on the number of Enhanced AT-PZEV plug-in hybrids that will receive HOV stickers. There is currently no limit set for the number of all-electric, or Zero Emission Vehicles that can receive white HOV access stickers. New Firefighter Endorsement (VC 12804.11) – In an effort to simplify the proper licensing of firefighters while continuing to ensure public safety, this law exempts operators of firefighting vehicles from the Commercial Driver License program and creates a new license endorsement process. This bill addressed a problem that had reportedly grounded many firefighters in rural areas. It removed a bureaucratic barrier at the DMV that made it very difficult for rural fire departments to license their firefighters to drive heavy equipment. There were situations where firefighters could not respond to fires because they were not licensed to drive fire engines. Rural fire departments had to send two firefighters sometimes hundreds of miles on a round trip to a DMV office and take a vital piece of equipment out of service for an entire day just to license one firefighter. This law allows firefighters who already possess a Class C license to earn a "Firefighter Endorsement" that authorizes them to drive fire equipment after completing 30 hours of classroom and behind-the-wheel training under supervision of a qualified fire chief. To complete the process, firefighters will still have to submit to the DMV their health questionnaires and written documentation from the fire chiefs who trained them and pass a written test, but it eliminates the requirement of having an already licensed firefighter to also travel to a distant DMV office. It put too many rural communities at risk to have personnel and equipment taken out of service for an entire day, especially during fire season. NEW LAWS EFFECTIVE AS OF JULY 1 AND BEYOND. Local Traffic Ordinances (VC 21 & 21100) – As of July 1, in an effort of ensuring that traffic convictions are recorded by the Department of Motor Vehicles, local authorities may not enact or enforce a local ordinance on any matter covered by the California Vehicle Code. The intent of this law is to ensure that drivers throughout the state of California will be treated uniformly for moving violations. Motorists statewide would be safer and better protected from unfair ticketing practices for example. Cities are no longer allowed to circumvent existing state law by citing motorists under newly written, local municipal codes. Under this law, this new trend by local governments to write their own vehicle codes to cite motorists for moving violations would stop. Driving Under the Influence (VC 23597) – Effective January 1, 2012, this bill authorizes a court to order a 10-year revocation of the driver license of a person convicted of a third or subsequent DUI violation, with possible reinstatement after five years if specified conditions are met. In 2008, there were 187,987 DUI convictions in California, 9,164 of which were third-time DUI offenders within 10 years. In addition, drunk drivers killed more than 1,000 people in California and injured 28,000 more. This law imposes higher consequences for those drivers in hopes of making motorists think twice about driving while under the influence. CHANGES TO TECHNOLOGY AND DRIVING TECHNIQUES. Everywhere you look and everywhere you go there are cell phones. An increased reliance on cell phones has led to a rise in the number of people who use the devices while driving. Unfortunately, this change in technology can affect our driving techniques negatively. The dangers associated with driving and cell phone use include handling and talking on the phone, text messaging and using the Internet, all of which jeopardize the safety of the vehicle’s occupants, pedestrians and anyone else around. First, drivers must take their eyes off the road and hands off the wheel to manipulate the devices when dialing, texting and surfing the Web. Second, people can become so absorbed in their conversations and other uses that their ability to concentrate on the act of driving is severely impaired. Since the first law was passed in New York in 2001 banning hand-held cell phone use while driving, there has been debate as to the exact nature and degree of hazard. The latest research shows that using a cell phone when driving is just one of many types of distracted driving that may lead to collisions and near collisions. There are a number of states that have a ban on the use of hand-held cell phones while driving and California is definitely one of those states. The law bans all drivers from using handheld cell phones while driving. The law does not affect passengers; they are free to use cell phones while traveling in an automobile. However, the law does apply to anyone driving in California, whether the driver lives in California or not. A driver is allowed to use a hands-free device such as the speakerphone option on the phone (as long as they do not hold the phone), a headset that plugs into their phone or a wireless headset such as a Bluetooth. Although any of these methods are recommended, the theory that hands-free sets are safer has been challenged by the findings of several studies. A study from researchers at the University of Utah, published in the Summer 2006 issue of Human Factors, the quarterly journal of the Human Factors and Ergonomics Society, concludes that talking on a cell phone while driving is as dangerous as driving drunk, even if the phone is a hands-free model. An earlier study by researchers at the university found that motorists who talked on hands-free cell phones were 18 percent slower in braking and took 17 percent longer to regain the speed they lost when they braked. A number of cell phone companies are considering developing technology that will prevent people from receiving calls and texting while driving. The technology is intended to limit dangerous distractions by temporarily interrupting service so that people do not answer their phones when they are behind the wheel. One carrier has already introduced a service that automatically disables rings and alerts and sends calls to voice mail when phones are in a moving car. Some safety advocates said that it is unclear whether consumers would avail themselves of the technologies or whether the technologies would be effective. The safest thing to do is to just not use your cell phone at all while driving or pull over to the side of the road safely and stop to use it. We will discuss this matter in further detail later on in the course. REASONS FOR TRAFFIC LAWS. WHAT IS TRAFFIC? The reasons for traffic laws are for the safety of everyone on the road and to keep order and movement in traffic. Traffic on roads may consist of pedestrians, ridden or herded animals, vehicles, streetcars and other conveyances, either singly or together, while using the public way for purposes of travel. Traffic laws are the laws which govern traffic and regulate vehicles, while rules of the road are both the laws and the informal rules that may have developed over time to facilitate the orderly and timely flow of traffic. Organized traffic generally has well-established priorities, lanes, right-of-way, and traffic control at intersections. Traffic is formally organized in many jurisdictions, with marked lanes, junctions, intersections, interchanges, traffic signals, or signs. Traffic is often classified by type: heavy motor vehicle (e.g., car, truck); other vehicle (e.g., moped, bicycle); and pedestrian. Different classes may share speed limits and easement, or may be segregated. Some jurisdictions may have very detailed and complex rules of the road while others rely more on drivers’ common sense and willingness to cooperate. Organization typically produces a better combination of travel safety and efficiency. Events which disrupt the flow and may cause traffic to degenerate into a disorganized mess include: road construction, collisions and debris in the roadway. On particularly busy freeways, a minor disruption may persist in a phenomenon known as traffic waves. A complete breakdown of organization may result in traffic jams and gridlock. When cars became popular, local governments established traffic laws to limit collisions with horse-drawn wagons and ensure safety. The mandatory registration of automobiles was one of the first traffic regulations in the United States. New York became the role model in 1901 by being the first state to require that automobile owners register their vehicles. By 1920, license plates were mandatory in all states. It took longer for the states to require a driver’s license. In 1935, there were just 39 states that issued the licenses and only a few tested applicants. Before the 1930s, most drivers received their training from automobile salesmen, nonprofit organizations such as the YMCA, family members and friends. Soon, however, driver’s education was provided in the high schools. FATHER OF TRAFFIC SAFETY It did not take cars long to clog the streets and cities to begin setting speed limits, installing traffic lights, designing one-way streets and adding parking meters. Yet, it did take drivers longer to start obeying these laws. The book “Rules of the Road” was written by William P. Eno in 1903. Eno, “the father of traffic safety,” introduced many road regulations, such as the need for slow traffic to remain to the right and cars to pass only on the left, as well as one-way streets, crosswalks for pedestrians, stop signs and safety islands. He believed that stoplights would never work and police would always be necessary at intersections. Ironically, he had his chauffeur drive him around. OBEYING TRAFFIC LAWS Traffic laws now make up a major part of most state regulations. Their main purpose is to improve unsafe driving and to provide education to bad drivers. Research shows that most people will obey the traffic laws, even when they hit a red light at 3 a.m. and there is not another car in sight. There is, however, a group of people who constantly get caught for ignoring the laws. Studies show that more people follow the laws when they think that there is a good chance of being caught and less adhere to them when they believe they can get away with it. MOVING AND NON-MOVING VIOLATIONS Since the beginning of traffic laws, drivers have received tickets for “strict liability” offenses. In other words, the person can be found guilty of breaking the law, without any criminal intent to do so. The police only need to prove that the person did not follow the law. Examples of these moving and non-moving strict-liability traffic offenses are: not properly using turn signals, going through a stop sign without making a full stop, driving a car with only one working headlight, speeding, driving too close to another car, not putting enough money in a parking meter and parking in a loading zone. In most cases, except for instances such as driving under the influence and a hit and run, the driver does not have to go to criminal court. Fines can be large, however, for offenses such as speeding, and a driver may lose his or her license after accumulating a number of points for traffic violations. DIFFERENT LAWS PER STATE Because traffic laws are set by the cities and states, they may differ considerably from one state border to another. When renting a car in another state, find out if there are any unique driving regulations. For example, although numerous states have passed a law that mandates wearing seat belts at risk of being ticketed, other states have not been this strict. Seat belt regulations can be divided into primary and secondary categories. The primary rulings allow police officers to ticket drivers and passengers for not wearing seat belts, even if no other traffic law has been broken. States with secondary seat belt laws say that police officers can give tickets for seat belt non-compliance only if the drivers are cited for another offense. Thirty states have primary laws, 19 have secondary laws and New Hampshire has no seat belt law at all for adults, but a primary one for children younger than 18. First of all, to drive safely you must follow many rules and laws. Driving rules tell you where and when you can drive. They are not only for informational purposes, but more importantly, for your safety. Traffic signs can come in all shapes and sizes… Many road signs warn you to slow down or watch for hazards ahead. Most warning signs are yellow and shaped like a diamond. Some common warning signs are shown below. 21462. Obedience to Traffic Control Signals 21461. Obedience by Driver to Official Traffic Control Devices 21454. Lane Use Control Signals Traffic lights, signs, and “right-of-way” rules tell you when to go or stop at an intersection. These are what the colors of traffic lights mean… 21450. Official Traffic Control Signals 21451. Circular Green or Green Arrow If all traffic signal lights are not working because of an electrical power failure, you must stop at the intersection and then proceed when you know other turning and approaching vehicles, bicycles, or pedestrians will also be stopping. A blacked-out traffic signal is the same as a stop sign controlled intersection in all directions. Black and white signs like these tell you what to do. You must obey them. 21455. Signal at Other Places At many traffic signals, you need to push the pedestrian push button (once) to receive the “WALK” or “WALKING PERSON” signal. At a crossing where there are no pedestrian signals, pedestrians must obey the red, yellow, or green signal lights.

<urn:uuid:01d71871-dcd1-4baa-b312-f946f6ea610a>

CC-MAIN-2024-10

https://worldfamouscomedytrafficschool.com/_services/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

WHAT AMIGOS NICAS MEANS? Amigos Nicas is a charitable / non profit organization registered in Switzerland. The founder of Amigos Nicas Margarita Tschudi supports projects for children in Nicaragua since 1991. In April 2006, the association Amigos Nicas was set up. Amigos Nicas´s main ambition is the integration of local people in our project and to encourage them to use their own initiative to set up and maintain the project. Amigos Nicas provides the following: - Amigos Nicas supports care projects for local people in Nicaragua. - Amigos Nicas makes education accessible for children in need. - Amigos Nicas helps young mothers in need of financial support. - Amigos Nicas helps talented children in financial difficulties.

<urn:uuid:6ac8e6d8-4a13-44d0-92ed-34159c154906>

CC-MAIN-2024-10

https://wp.amigosnicas.ch/language/en/about-us/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

President Donald Trump said Friday he does not regard white nationalism as a rising global threat in the aftermath of mosque terror attacks in New Zealand that left at least 49 people dead. "I don't really," Trump said in the Oval Office after being questioned about whether he views white nationalism as growing. "I think it's a small group of people that have very, very serious problems, I guess." Three people were arrested in connection with the shootings. They include a 28-year-old man who was charged with murder and was due to appear in court Saturday. The other two remain in custody. New Zealand Police Commissioner Mike Bush said authorities were investigating their ties to shootings that occurred as Muslims convened for Friday prayers, the busiest time for many mosques around the world. The suspected shooter livestreamed video of the attack and posted a manifesto online. In the manifesto, he identifies himself as a white man, born in Australia, and lists the white nationalists who have inspired him. "If you look at what happened in New Zealand, perhaps that's the case," Trump said on white nationalism. "I don't know enough about it yet. They're just learning about the person and the people involved." Calling the attack "terrible thing," Trump said he'd not yet seen the manifesto the mosque shooter wrote. "I did not see it. I did not see it, but I think it's a horrible event, it's a horrible thing," he said, adding he was first updated on the attack early Friday morning. Trump referred to the attacks at a pair of New Zealand mosques as "terror attacks" during remarks, the first time the President had done so himself publicly. Earlier Friday, Trump expressed over Twitter his condolences to the people of New Zealand. "My warmest sympathy and best wishes goes out to the people of New Zealand after the horrible massacre in the Mosques. 49 innocent people have so senselessly died, with so many more seriously injured. The U.S. stands by New Zealand for anything we can do. God bless all!" Trump tweeted. Trump also tweeted that he had called Jacinda Ardern, the Prime Minister of New Zealand, on Friday afternoon. "Just spoke with Jacinda Ardern, the Prime Minister of New Zealand, regarding the horrific events that have taken place over the past 24 hours. I informed the Prime Minister ... that we stand in solidarity with New Zealand -- and that any assistance the U.S.A. can give, we stand by ready to help. We love you New Zealand!" Trump wrote in two consecutive tweets. National security adviser John Bolton said the US is "very concerned" and is following the events in New Zealand "very closely." "We're obviously greatly disturbed on what seems to be a terror attack, this hate crime in New Zealand. We've been in touch with our embassy overnight, we're still getting details, but the State Department and others are following up on it," he told reporters Friday morning. Ivanka Trump made a specific reference to Muslim communities in her condemnation. "49 innocent people were slaughtered in their place of worship during the terrorist attack on Christchurch Mosques. We join New Zealand and Muslim communities around the world in condemnation of this evil as we pray for the families of each victim and grieve together," the first daughter and adviser to the President tweeted. New Zealand's Prime Minister, Jacinda Ardern, called the incident a terrorist attack in a Friday press conference, saying the suspects held "extremist views" that have no place in New Zealand or the world. US Ambassador to New Zealand Scott Brown also expressed his condolences and pledged US solidarity. "We're heartbroken over the events in Christchurch today. We stand with our Kiwi friends and neighbors and our prayers are with you. Kia kaha," Brown tweeted.

<urn:uuid:fe831259-ade0-45d2-a87c-ec419e3abaa6>

CC-MAIN-2024-10

https://www.3newsnow.com/news/national/trump-says-he-does-not-think-white-nationalism-is-a-rising-global-threat

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Disclaimer: The translations are not official nor endorsed by 2OR, so please just treat it as a ‘fan-based’ translation. The Buddha-Dharma is profound. No matter how you convey it, it won’t be completely perfect. Because the Buddha-Dharma is an experience, it’s an awakening 【佛法深奥无比，怎么写，都不会是究竟圆满。佛法是一种悟】. Please enjoy, and I hope it serves as a good filler until the official English version comes out. Master tells you, everybody has predetermined karmic retribution waiting for us. When you encounter a crisis at the age of 39, and then another crisis at the age of 49, and it comes as though it’s coming in succession, isn’t it waiting for you? That’s your predetermined karmic retribution, the negative karma you accumulated in your previous life. If somebody claims that they don’t have any predetermined karmic retribution, it’s akin to saying that they won’t reincarnate and aren’t bound by the laws of cause and effect. So they won’t have any karmic affinities nor karmic retribution. Then that person is a liar. Why did Master word it as such? It’s to tell you if a person says that they don’t have a previous life, then they are a liar. If one doesn’t acknowledge the existence of a previous life and predetermined karmic retribution, then it’s the same as saying that karma or the laws of cause and effect doesn’t exist. And that violates the natural laws. That’s why even Bodhisattvas are bound by their karma. When the Bodhisattvas descend to the Human Realm, aren’t they influenced by their karma? But it’s just that the Bodhisattvas aren’t afraid of karma and could take it head-on by treating whatever they face wholesomely. They could bear with it and remain patient. When a karma consequence happens, one must forbear with it. For example, if you have recently become a new father, you would have to forbear. You would have to repay more karmic debts because not only do you have a wife, but also a child now. So you must completely show your love and can’t act selfishly. You are now a servant; you don’t have a choice. You have a family now. If you live selfishly, then what awaits you is a mental breakdown. The Bodhisattvas face their karma directly and try to resolve it with the condition of not creating new karma. When two people are unhappy with each other, that negative karma is sowed. If the two of them continue to feel this way and fight each other, this negative karma will continue. If one suddenly gets over it and admits that they’re wrong, and the other person also admits that they’re wrong, then the associated negative karma will no longer continue. Otherwise, you will continue to be unhappy about it, and what awaits you at the end of it is karmic retribution. Married couples are like so. If they’re constantly unhappy with each other, then they will eventually divorce. Isn’t that right? Everybody’s just realistic. If you treat me badly, why should I treat you well? You must understand this principle. If I treat you well, you will treat me well, and everybody’s well. If you say somebody is bad, would they treat you nicely? Bodhisattvas will never create new karma and aim only to resolve their past karma. If you don’t write any new words on a piece of paper with a pencil and you continually erase all the old words with a piece of rubber, that piece of paper will eventually become blank again. If you continue to write on the paper while rubbing out all the things you wrote previously, then that piece of paper will stay the same or worse. That’s why it’s very important not to create new karma. Bodhisattvas are not the same as humans. Bodhisattvas don’t dare to create new karma, while humans constantly create new karma. That’s why even though the Bodhisattvas still experience their karma, but they don’t develop any future karma. Master here tells you of a story. Once upon a time, there was a venerable monk who had cultivated to the stage where he knows about his past and future. He knows that in his current life, there are people who will kill him at a certain place and time. That is due to karma he had sowed in the previous life. Do you know why there were people who wanted to kill him? You will know later. This venerable monk knew that he couldn’t avoid this calamity. So not only did he not try to hide, he went to the exact location he foresaw that he would encounter this calamity at a village across the mountains. At that moment, he crossed paths with a group of wandering men who then attacked him by throwing stones at the monk. The monk was seriously injured, and after a while, the wandering men left. The monk let out a sigh of relief and was rescued by a kind-hearted passerby. The passerby asked him a few questions, and the monk told him about the situation. “Why are you so foolish? You clearly knew that you would encounter the calamity, and you might die, so why did you insist on triggering this karma?” The monk replied, “It’s because, in the past life, I had passed a decree that had caused a lot of people to die. Those people died because of me.” Karma isn’t fake. You will experience the karmic consequence in your current life caused by what you had sowed in your past life. That’s why the monk said, “I know that if I don’t let them take their revenge on me in this life and there’s still so much unresolved grudges and resentment, then I will never be able to liberate from samsara.” Because the monk had already thought about it clearly, he’s indifferent about his current life and wanted to attain fruition in his cultivation to transcend life and death. But how could he do so if there’s still so much negative karma left? So he must repay his karmic debts. Just like loans, if you had borrowed a lot of money from the bank, you must repay it back with interest when you earn money. So if you never pay back the principal loan, you will never have money. So you might as well go all in, sell the house that you own to repay all the debts and then buy a new house with what’s left. The monk said, “If I don’t resolve this negative karma in this life, then I will never transcend. That’s why I’ve chosen this method to resolve it.” Master tells you, when people argue, it creates karma. We mustn’t increase our karma; we must let go. We must cease all fighting. If you suffered, then accept it; you are eliminating your karma. If you don’t understand the meaning of experiencing hardships, then you will experience even more hardships in the future. If you suffered this time and feel resentful about it or felt that you’re at a loss, you will suffer more next time. This principle is easy to understand. It’s just like when you’re playing the slot machine. You’ve lost fifty dollars, so you feel at a loss. But you’re unwilling to let it slide and is determined to win it back. Then after a few rounds, you’ve lost one hundred dollars. But you still insist on wanting to win it all back and vow that if you win it all back, you won’t gamble again. Then you’ve lost one thousand dollars. One thousand dollars to you is a big sum to lose, so you must win it back, and you tell yourself that if you get it back, you’ll never gamble again. But then you lose ten thousand dollars. People must learn to eliminate their karma. Don’t continue to be so stubborn. All relationships that we have are from our karmic affinities. We are all like brothers and sisters. Don’t create new karma. The Bodhisattvas will never create new karma. Master wishes that you cherish your karmic affinities and you get away from suffering and attain happiness. Master is happy that he explained so much and made many examples. Due to time constraints, he needs to stop here and immediately go out to propagate the Dharma. Time is tight. He’s still unwilling to abandon you. In reality, Master is regularly tired and stressed. Some people advised Master to take time off from lecturing, but he refused. Master isn’t doing this solely for your sake, but many people want to listen to his lectures, and he thinks about them. He wishes that you could behave like him. Don’t be fooled by his tough appearances, but he’s soft-hearted. He wishes that you will properly cultivate and don’t get in a huff. What’s bad about taking the initiative in admitting your mistakes? Why must you keep holding on to your flaws and shortcomings and be unwilling to let them go? It’s like holding on to your rubbish and let the stench cover up your body so others could smell it. Cultivation is about changing your shortcomings. If you can’t do that, how could you cultivate your mind? Many of you have followed Master in cultivating for a long time now, yet your face still looks sulky. Many of you still fight and are unhappy. Is that cultivation? You must change your flows. There’s no other way to cultivating your mind. Master had said, “Other than letting go is still to let go.”

<urn:uuid:9931a049-505f-41a9-956d-36aafc6c413d>

CC-MAIN-2024-10

https://www.4sage.org/post/v10-2

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

You use your garage for tinkering and storage. Often your garage becomes the starting point for major projects such as landscaping or car work. You leave boxes full of old rags or used paint cans in your garage that you don’t really want to store in your home. As a result, you see your garage either as a place for fun projects or common chores. Odds are you wouldn’t see it as a threat. However, garages can cause a major fire hazard: Nearly 6,600 garage fires start every year, causing 30 deaths and 400 injuries. Garage fires cause around $457 million dollars in property damages every year. Despite the danger, you can make your garage safe when you take the right precautions. We will show you some of the best ways to eliminate fire hazards in your garage. Read on to discover the specific fire risks you face. If you correct them, you will have a home safe from garage fires. Why Garage Fires Are Dangerous A survey of garage fires found that they are more likely to cause injuries and extensive property damage, making them more severe than other residential fires. What makes garages such a danger to the rest of the home? Fires in the garage have plenty of air and fuel necessary to get started. Garages are home to many flammable materials such as fuel and work rags. Perhaps more significantly, garages give fires a structural advantage.The low spot in the home allows fires to spread to the rest of the home quickly. Garages that have lower ceilings can give the fire more avenues to move out of the garage. This is especially true if a bedroom sits above the fire. The furnishings give the fire extra food, while the fire also blocks the window exits. With these factors in mind, you can develop a three-pronged strategy to prevent garage fires. - Get rid of fire starters - Second, reduce the fuel that a potential fire has access to - Make sure you can stop the fire from spreading to the rest of your home Get Rid of Fire Starters Fires need a spark, heat, or flame in order to catch. If you remove potential starters form your garage, you can rest assured that you won’t see a major fire. The following methods can help you neutralize the different fire starters in your garage. - Ensure the best electrical wiring in your garage. Electrical wiring is the number one cause of garage fires. - Use lightbulbs with proper wattage that don’t overload your wiring. - Don’t leave charging appliances alone in your garage and never use an extension cord to charge an appliance. - Never leave flammable chemicals in direct sunlight. The heat can cause them to explode. - Don’t mix chemicals. This can start a fire or create deadly fumes. Reduce the Fuel in Your Garage Garages are places for flammable items, and in some cases that is unavoidable. However, it’s best to remove as many fuel sources as possible. You can prevent a large fire from burning out of control if you keep flammable materials out of the fire’s reach. Use these tips to make your garage safer. - Remove clutter like paper and oil rags from your garage. A cluttered garage provides the initial fuel that builds fire to unmanageable levels. Make sure you secure oil rags in separate, air-tight containers and place them far from any heat sources. - Store oil, gasoline, paint, and propane in a separate shed. Even if they catch here, the fire will stay localized in the area. This rule is especially true of propane tanks. The pressurized fuel will explode if it catches on fire, sending deadly fragments through your home. - Keep other flammable liquids away from any appliances. Store them in small quantities only. Install Safety Features to Contain a Fire If a fire does happen in your garage, you need to contain the fire immediately. Safety features and fire-resistant home improvements can keep the fire in your garage until emergency services can come help you. Use these ideas to determine which upgrades work best for your home. - Upgrade your garage walls and ceiling with Type X fire-rated gypsum. This material will block fires from spreading, giving your family time to exit your home. - Get a 20-min fire-resistant door that is self-latching and self-closing. This will prevent a fire from entering the living area of your ho me before you can escape. Never have a doggy door on your garage door. - Install an attic hatch cover if your attic entryway is in your garage. - Purchase a heat alarm for your garage, rather than a smoke alarm. Heat alarms work better in the dusty environment of a garage. If you want to use your garage as a work station or a place to tinker, the threat of fire means you need to take steps to stay safe. We have given you a variety of strategies to remove ignition sources, reduce available fuel, and contain a fire. With these strategies, you can reduce your chances of ever experiencing a garage fire.

<urn:uuid:a033df66-d548-4a04-9566-dcaa1ced43d1>

CC-MAIN-2024-10

https://www.aagaragedoor.com/protect-your-home-from-garage-fires/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

EP 50 - Marc Andreessen on AI saving us all LISTEN: Apple Podcasts For our 50th episode, we went all out. By popular demand, we have Marc Andreessen back on the show to discuss his controversial post “Why AI will save the world”. We went deep on his post and also got Marc to respond to some of the responses and critiques. He didn’t hold back! From AI in education to out of control AI processes to immanetizing the eschaton (what??) to maximizing paperclips we discussed it all. 1:31 Discussing “Why AI Will Save the World” 2:40 The Baptists and the Bootleggers of AI Doomerism in Washington D.C 5:49 Private Truths and Public Lies 8:54 The Parallels between Prohibition and AI 11:27 Why AI is a Positive Force for Society 13:22 AI: Artificial Intelligence or Augmented Intelligence? 15:50 Definining intelligence 20:46 Marc’s Definition of Superintelligence 25:11 How Marc and his 8 Year Old Son use ChatGPT 28:43 What would it mean if you had an AI that was as smart as Einstein? 30:06 Marc's counter response to Why AI won’t kill us all 31:07 Marc's response to AI as a runaway process/orthogonality thesis 38:07 On Hostile Powers Using AI 38:38 The Precautionary Principle and Fire 40:37 Parallels between AI and Nuclear Weapons? 46:29 The Two AI Counterfactuals that worry Marc 48:52 China's intentions with AI 52:07 Intelligent Design’s Impact on Humanity 55:31 Why is open source important to AI? 58:31 Marc’s Advice to Founders in AI 1:01:00 What Marc would say to World Leaders about AI 1:04:22 Cultural Portrayals of AI 1:13:15 What is the next step after GPT4? 1:18:50 Data’s Role in AI Advancement 1:22:18 Synthetic Data and AI 1:26:44 How ChatGPT Impacts Education 1:33:58 Does AI take the place of human relationships? 1:37:35 Defining “Immanentize the Eschaton” 1:46:26 Marc’s Favorite ChatGPT Prompts “Ernest Hemingway once described the process of writing, as you opening your veins and letting the blood flow out onto the page. My version of that is I just wait until my frustration spikes to the point where my head's about to explode. Explode it did onto my keyboard in this piece.” “[AI] is like a super genius at engaging with you in conversations about quantum physics and yet it can't play Wordle…it's actually a very interesting topic in the industry: trying to understand why these things are good at some things and why they're not at others.” “If this technology is allowed to develop,humanity is going to have a lot of thought partners that are going to dramatically level up the kinds of things that can be done in the world…we could be on the cusp of an incredible scientific breakthrough.” “The ability to have sophisticated intentions is not the same thing as having sophisticated capabilities.” “You can morally reason with an LLM today…and LLMs are actually perfectly capable of engaging in a very sophisticated moral composition.” “AI is a technology, it's a tool. Just like any other technology or tool it is a human-made creation of math and code running on ships and networks. In this regard, it’s like any other piece of software, any other technological tool that we've ever built. Technological tools can be used for good things and they can be used for bad things.” “Nuclear power was basically put on a shelf for 50 years because of this moral intuition that said, “Because nuclear weapons are bad, therefore nuclear energy is bad.” It has just been a horrific not just technological and economic, but moral mistake. That's precisely the kind of mistakes that I'm worried that we're going make with AI threat for ironically many of the same reasons” “If you're worried about AI being used to develop offensive weapons, you should use AI to develop different defenses in whatever domain you're worried about. And so, AI should be a technology that lots and lots of good people should be able to pick up and use for lots and lots of good purposes. I think that alone is a good general answer to the concern about bad people doing bad things.” “AI is highly likely to be one of the central technologies of our time and has the potential to make life much better.” “If there's one concern that people in the space have, it’s the inability to improve these models much beyond where they are because the existing companies have already exhausted the available training data…Then there's a very fundamental science question, which is: Will synthetic data be useful in training AIs?” “Every kid from now on for the next millennium is going to start out life with an AI teacher, tutor, assistant, coach, mentor, friend, and ally who is going to be right there at their side every step of the way…Overwhelmingly, I think this is gonna be a net positive for quality of life very broadly.” “With my prompts I attempt to dive into how well the machine itself understand human behavior.” Thanks for reading The Aarthi and Sriram Show! Subscribe for free to receive new posts and support my work.

<urn:uuid:78ac8b2d-df32-442c-b0c9-55af71d922a5>

CC-MAIN-2024-10

https://www.aarthiandsriram.com/p/new-marc-andreessen-responds-to-his

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Digital marketing is the method of endorsing your company through on the internet stations. It offers many different strategies, such as search engine optimization (SEO), compensated to market, and e-mail marketing. You can reach a bigger audience and drive a boost in traffic to your website through the use of digital marketing (디지털 마케팅). Listed here are five reasons why your organization requires digital marketing: 1. Achieve a bigger audience You are able to reach a much greater viewers than classic marketing techniques with digital marketing. By way of example, you can goal your advertisements to specific demographics, likes and dislikes, and spots. You may also use social media to attain a broader market. Social websites is probably the most widely used on-line routines, and it’s liberated to use. Digital marketing is actually a cost-effective method to reach your potential audience. It is possible to achieve more and more people at a lower price as compared to conventional marketing techniques. And, with the proper tools and methods, you can obtain a lots of value for your money. 3. Elevated Return on investment Digital marketing can also help you accomplish a greater Return on your investment than standard marketing methods. You may generate more prospects and sales with a more affordable using the right tactics. 4. Greater mobility Digital marketing offers you greater overall flexibility than traditional marketing methods. You may get to your target market wherever they are, anytime. You can even tailor your information to put their requirements and likes and dislikes. Plus, digital marketing enables you to monitor your leads to discover how well your campaigns are carrying out. This assists you great-tune your strategies to attain much better effects. 5. More fascinating Digital marketing is far more stimulating than traditional marketing methods. With digital marketing, you can create entertaining and engaging content material that catches the attention of your potential audience. You can even use social media to interact with together with your market individually. This helps create trust and devotion among your customers. In summary, digital marketing is a crucial resource for any business. It will help you get to a larger target audience, acquire a greater Return, and engage with the audience more effectively. So make use of it to your great advantage and see the outcomes on your own!

<urn:uuid:7eaf8ef7-bfcc-4398-baf2-fd5ad9cbdbfa>

CC-MAIN-2024-10

https://www.about-cats.org/why-you-should-invest-in-digital-marketing-for-your-business/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

American cities are losing more trees than are being planted. Three reasons are given for this by The Washington Post in a recent article (read here). A study reveals that trees yield $5.82 of benefits for every $1 spent on maintenance, but we're losing them, and fast. The Post blames (1) costs of tree replacement (it's cheaper to let them die), (2) urban growth lacking tree design and space, and (3) insects brought by international trade, such as the ravenous emerald-ash borer. Trees are also pollution and particulate absorbers, so humans suffer more without tree canopies to shade and protect them. However, the "particulates" in question are also the result of heavy aerosol spraying from the geoengineering program of recent years. While "experts" ignore this reality, they do acknowledge that infestations of insects in trees are escalating like never before. Is it "international trade" or is it what simply happens when life forms begin to die: as they weaken, they draw insects and fungi that begin to consume them. It's all part of the trophic chain of life.

<urn:uuid:ae13d160-2269-4b07-af01-753552ff3af0>

CC-MAIN-2024-10

https://www.aboutthesky.com/aboutthesky/smallstorm-blog/2016/616-rapid-loss-of-trees-in-america

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

This course will explore age-appropriate Social-Emotional Learning concepts in relation to the everyday life of a student. We will look through the lens of scripture to guide our journeys. Students will learn to identify and articulate strong emotions, and learn processes to manage those emotions. Academy Flex courses provide immediate access to curriculum and a teacher to grade all student work. We provide a safe learning environment and a biblical worldview in all of our courses. Teachers and Tech Support are available to you round the clock. At the end of each course, we give you a performance report for your own record-keeping!

<urn:uuid:eda75568-b8f7-4ca3-98fc-e6b15f9d7e56>

CC-MAIN-2024-10

https://www.academyhomeeducation.com/product-page/my-emotions

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

|M.A. Dou, Y.L. Yao, L.Q. Du, G.M. Sun, X.M. Zhang, J.G. Li |pineapple (Ananas comosus), various sections, sucrose, sucrose phosphate synthase, sucrose synthase Sugar accumulation of ‘Comte de Paris’ pineapple fruits was measured from 20 days after anthesis (DAA) to maturity at 80 DAA. The sugar content was highest in the basal section of ripe fruit, followed by the medial section, apical section and fruit core. Changes in activity of acid and neutral invertases (AI and NI respectively) and sucrose phosphate synthase (SPS) corresponded to changes in sugar concentration gradients within various sections during fruit maturation. The higher activity of invertase in the basal section of the fruit likely was associated with rapid cleavage of sucrose. High invertase activity would also help to form a sucrose gradient between the leaves and the fruit, which facilitated sucrose transport to the fruit. Higher SPS activity in the apical section could promote the synthesis of sucrose, which indicated that the difference between activity of invertase and SPS resulted in the difference of sugar accumulation among the various sections. Our results indicated that the SPS and invertase activity was a gradient distribution among the sections at the mature stage, which was similar with the sugar concentration, which showed the activities of SS and SPS had a great impact on the sugar accumulation in the medial and the basal sections of fruit during the period of 70 days after anthesis (DAA). Rapid sucrose accumulation of different sections was related with the increase of SPS activity and the reduction of NI activity from 70 to 80 d. The activity of SS regulated the sucrose accumulation in the fruit apical and core section in the period of 70 DAA, However, the activities of AI, NI and SPS regulated the sucrose accumulation of the fruit core after 70 DAA, whereas the activities of NI and SPS regulated the sucrose accumulation in the apical, medial and basal sections of the fruit. Download Adobe Acrobat Reader (free software to read PDF files)

<urn:uuid:3864689b-7aad-472d-946f-8caf44eb7ee3>

CC-MAIN-2024-10

https://www.actahort.org/books/902/902_12.htm

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Changing Places Toilets are adapted toilet facilities that provide accessible toilets to those in the community who may have high support needs. Changing Places Toilets follow four design options: - 1A without shower rectangular - 1B without shower square - 1C without shower alternative door location - 2 with shower rectangular Detailed information regarding changing places toilets design and specifications can be found at the Changing Places Australia Website and in the below document. . Toilets built according to the Changing Places design specifications will generally meet the Deemed-to-Satisfy Provisions of the National Construction Code. Changing Places facilities provide: - a height-adjustable adult-sized change table - a constant-charging ceiling track hoist system - a centrally-located peninsula toilet - circulation spaces as defined in the design specifications - an automatic door with a clear opening of 950 mm at a minimum (1100 mm for beach and lake locations) - a privacy screen. As stated above an automatic door opening system is a requirement for Changing Places Toilets. To ensure safe entry and exit a disabled access privacy kit must also be used to comply with Australian Building Standards and Codes. Compliant Privacy Kits Must: - Have specified door control locations – as stated in the Changing Places design specifications. - Push To Open and Push To Lock buttons of 25mm in diameter. The Push to Open button can be replaced with a MLAK where there is risk of vandalism - Occupied’ and ‘Vacant’ indicator lights are required on the external plate. • ‘Locked’ and ‘Unlocked’ indicator lights are required on the internal plate - Door control braille for the vision impaired While not a requirement it is recommended that Changing Places toilets all be fitted with a Master Locksmith Access Key (MLAK) The MLAK is available for free to eligible people with a disability who need to access the Changing Places facilities. These can be organised through local councils. Action Auto Doors disabled toilet privacy plates are compliant with Australian Standards and the Disability Building Code AS 1428.1:2021 -Design for access and mobility Privacy plates come with or without MLAK lock for changing places requirements. Compliance with the Changing Places design and specifications is important as all changing Places Toilets must be deemed compliant by an independent Changing Places Assessor. It is always recommended to engage with an Assessor before construction commences as there is a 3 stage process to ensure compliance at each stage of the build. Action Auto Door can also provide information in relation to the installation of the automatic door operator. Before plans go ahead it is important to have the right measurements and space for the automatic door operator. Design specifications will also confirm whether a swing door or sliding door operator is required.

<urn:uuid:11e395b3-b0d7-449d-b202-3e8dc162c46b>

CC-MAIN-2024-10

https://www.actionautodoor.com.au/changing-places-toilets-what-are-the-requirements/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

A young veterinary surgeon begins to practise in the remote Yorkshire Dales in 1937, treating abscesses in horses' hooves and milk fever in cows and prescribing diets for overfed lap dogs. It hardly sounds like the stuff of bestsellerdom. But James Herriot's first book, All Creatures Great and Small (first published in Britain in 1970 under the title If Only They Could Talk), and the seven books that followed became enormous hits worldwide, selling over 60 million copies by the time the author – whose real name was James Alfred Wight – died in 1995. They also generated two films and a hit television series that ran from 1978-80, and returned for another four seasons between 1988 and 1990. Still, when Britain's Channel 5, in partnership with Masterpiece on PBS, announced a remake of the series in 2019, it didn't inspire much excitement. But once again, the story demonstrated, as Anatole Broyard put it in his 1972 New York Times review of the novel, "what a satisfying thing ordinary life can be". Despite featuring mostly little-known actors (including Nicholas Ralph as James Herriot) and large animals, the new series was an immediate hit when it debuted in Britain in September. It drew over 5 million viewers for each of its six episodes and became Channel 5's highest-rated show since 2016, charming a nation that after months of COVID-19 confinement and restrictions was clearly ready for a dose of rolling hills, taciturn farmers and livestock in need of friendly ministrations. "It's an old axiom that at a time of great uncertainty people seek certainties," James Jackson wrote in The Times. "Channel 5 has recently, by luck or by design, offered solace by being a kind of safe space for older, decent values — a halcyon vision of Yorkshire." Helen Lewis, in The Sunday Times, put it more succinctly: "Apparently, the best cure for COVID blues is watching a man contend with an abscessed hoof." Now All Creatures, which premiered recently in the US on PBS' Masterpiece, arrives in an America in need of its own relief, amid a still-surging pandemic and wrenching political upheaval. "It has the warmth people are looking for during a really challenging time," Susanne Simpson, the executive producer of Masterpiece, says. "It gets at emotional truths that are comforting for us." The idea to revisit Herriot's gentle agrarian tales was actually born of a healing impulse, albeit in response to an earlier national crisis. Colin Callender, whose Playground Entertainment produced the series, first thought about a remake of All Creatures after the Brexit vote in 2016, he says. "The divide in views between the rural and metropolitan areas was really striking, and I was reminded of All Creatures, because the books really bridged that divide and appealed so broadly," he says. "I felt that living in such difficult and complicated times, there would be an audience that wanted a show that was gentle and entertaining and would bring us together." And that, he adds ruefully, "was before COVID." Callender met Wight's children, Jim Wight and Rosemary Page, to discuss the idea. "I think they were sceptical at the beginning, or at least cautious about how it would be brought back," he says. They stipulated that the series should accurately portray veterinary practice and farming life in the period covered by the books, and be filmed in Yorkshire. But they agreed to the idea of exploring the characters in more psychological depth, particularly the women – the housekeeper, Mrs Hall (Anna Madeley), and James' love interest, Helen Alderson (Rachel Shenton) – who had minor roles in the original series. A bit like a treasure hunt There were lots of hints in the books about the type of woman that Helen was, says Ben Vanstone, who wrote the series. And not just Helen. "It was a bit like a treasure hunt," Vanstone says. "The books were full of clues to who these people are." The lead director is Brian Percival, winner of an Emmy for Downton Abbey. The series opens in 1937, as James, a recent graduate of Glasgow Veterinary College, resists pressure from his mother to find manual work and seizes upon the opportunity to interview for a job in Darrowby, a fictional village in Yorkshire. After a trial by fire (a kicking horse and a home-brew situation), James is hired by the irascible but kindly veterinarian Siegfried Farnon (Samuel West) and settles down to Yorkshire life in a house run by Mrs Hall and shared with Siegfried's irrepressible young brother, Tristan (Callum Woodhouse), a veterinary student. "I definitely had slight nerves about filling the Wellington boots of Christopher Thomas, who played James in the '70s series, because that had such a massive fan base," says Ralph, a real-life Scot who graduated from acting school in 2017. The books, he says, were his principal source for his character. "They show James' intelligence and dedication, his compassion for the animals," he says. "He's on the back foot quite a lot, too, with the eccentric boss and the farm animals he has no experience of." The role of James is less showy than that of the charismatic Tristan or the eccentric Siegfried, a part that West says he embraced with alacrity, "because I don't get to be funny very often". West (who along with the late Diana Rigg and Matthew Lewis, in smaller roles, is one of the bigger-name cast members) is the son of British actors Timothy West and Prunella Scales, and remembers watching the original series with his parents. "They were a bit cross they weren't in it, because every other British actor was," he says. He had admired both Anthony Hopkins (in the first film) and Robert Hardy (in the television series) in the role of Siegfried, he says. "The Robert Hardy fan club put out a tweet saying no one would ever be as good, but they were pleased I was going to have a go, which was lovely. "It's like Hamlet or Doctor Who," he adds. "You give it a shot until someone else does." Actors go to vet boot camp All the principal actors went to "vet boot camp", as Ralph puts it. "We got up close and personal to horses, cows, sheep, everything, and went through some of the processes, like looking for abscesses. It was intimidating, but you want every detail right; how a vet would touch the animal, wash his hands, or wear his spectacles around his neck." They all learnt a lot about farming, says Shenton, whose character runs a dairy farm with her father. "Times were very tough in that era, and people didn't have hundreds of animals," she says. "If one is ill, it can have a huge effect." The original series, a review in The Telegraph noted, "became synonymous with vets' rolling up their sleeves and rummaging around in the rear ends of startled-looking cattle". (The James Herriot Museum in Thirsk, the writer noted, has an interactive installation allowing visitors to "put their hand up a cow's backside".) But recently implemented rules about using animals on film meant the actors were spared those experiences, and worked with a mixture of live animals and prosthetics. "You have to work with animals that are good at pretending," West says. "It's quite amazing." Vanstone says that while the first season leans primarily on Herriot's first book, a recently commissioned second season will use a mix of the first two in order to broaden both the character perspectives and the kinds of veterinary action on display. The novels include many stories about cows, he says. "I tried to cast a wider net." The popularity of the series across age groups (Channel 5 reported a large share of the 16-34 demographic) and audiences suggests that the show hit a sweet spot for family comfort viewing at a moment of national adversity. "There is something about the show's focus on community, heart and family that seems to have been particularly resonant at a time when we have all gone through something globally difficult," Shenton says. And then there's the aspect that has less to do with community or creatures than with more transportive pandemic pleasures: the show's ravishing Yorkshire hillsides and time-capsule-pretty villages. "None of us have been able to move about much this past year," Shenton says. "But we've spent some time in beautiful Darrowby." Fetching latest articles

<urn:uuid:17651851-13a9-4e05-9ca8-c4279b6e188a>

CC-MAIN-2024-10

https://www.afr.com/life-and-luxury/arts-and-culture/all-creatures-great-and-small-rehabilitates-cows-and-soothes-20210111-p56t99

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Pure pure cotton sanitary napkin equipment in practice often requires continuous optimization, development and replacement in the process of use. The following is an example of the change and adjustment of the position of the reference point. The zero point of the pure cotton sanitary napkin equipment is set at the factory and is a fixed point that cannot be changed. The reference point is set to find the zero point of the pure cotton sanitary napkin machine during operation. This point is either in the same position as the zero point or offset from the zero point. It is set at the factory. If an alarm condition occurs during operation, the reference point returns abnormally and the correct position cannot be found. This is a fault caused by the coordinate axis being out of position. It can be reset by operating the reset button. In fact, when the pure cotton sanitary napkin machine returns to the reference point, the proximity sensor generates a zero pulse each time the screw is rotated. Therefore, which zero pulse should be used as the reference signal? At the specific position of the coordinate axis, we can install the hardware block and the travel switch as a reference point reduction switch. Since the switch allows for initial positioning, the sensor can detect multiple zero pulse signals by determining the signal to return to the reference point via the deceleration switch. Error compensation technology is commonly used in the application of pure cotton sanitary napkin equipment. Currently, the ability to identify error sources and the ability to compensate for errors after they are generated is mainly used for practical applications. In the processing of pure cotton sanitary napkin equipment, there are many practical influencing factors, including the indoor temperature of the production plant, indoor ambient air quality, installation errors, temperature errors, etc. In the work, the processors gradually realize the space error, high frequency error, etc. In the actual machining process in the workshop, different types of tools and workpieces have relative movements during operation, so dynamic errors are generated, and such dynamic errors should also be compensated in real time. Therefore, in order to improve the machining level, in addition to compensating the basic static error, the dynamic compensation technology should be studied to meet the machining requirements and ensure the product quality. Therefore, for error compensation, the basic idea is to reduce the appearance and dimensional errors of the produced products by displaying the input system, and after input, the electronic control system theoretically calculates and obtains the compensation parameters, and then controls the compensation. Generally speaking, the accuracy of CNC is high, and its error compensation can be divided into two aspects, one is software error compensation, and the other is hardware error compensation. In order to improve the processing accuracy, it should be used for a long time. At present, for the feeding system of pure cotton sanitary napkin equipment, the positioning accuracy should also be studied in depth. The accuracy of the feeding system is related to the whole production process and plays a great role in promoting the overall performance of the improvement. By testing the positioning accuracy of the feeding system, we can get the error source of the feeding system, how to reduce the error, improve the accuracy, and propose error compensation methods to improve the overall work performance. After the error is generated, the error value is analyzed theoretically, and the parameters of each axis of the feed system are repeatedly corrected, and the corrected value should be followed up slightly to improve the positioning accuracy. In recent years, pure cotton sanitary napkin equipment has conducted a lot of research in various error compensation, and has made sufficient progress and development. However, there are still certain gaps in universality, systematization and practicality. In the future, we should explore and study how to establish a comprehensive model of errors, study different types in depth, and establish and develop low-cost error accuracy detection and compensation methods.

<urn:uuid:b0e0d05c-36dd-4ff2-a685-1d8e848a46d5>

CC-MAIN-2024-10

https://www.aladdintop.com/article/2012

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

As one of the oldest vineyards in Bordeaux, Château Carbonnieux has been making wines since the 13th century and for over fifty years, Carbonnieux has belonged to the Perrin family, who continue to oversee the winemaking. A deed of exchange dated April 2, 1292, between two monks of the powerful abbaye de Sainte-Croix de Bordeaux, bears witness to the mediaeval origins of the Château Carbonnieux estate. At the time, an enclave was cleared by the Carbonius family to create the vineyard. Château Carbonnieux was classified as a Grand Cru de Graves for the first time in 1953, for its red and white wines. The final classification of 1959 confirmed this ranking. In the meantime, the Perrin family had taken over the estate. Originally from Burgundy, the family founded a large winery in Algeria in the nineteenth century before choosing to settle in Bordeaux. The history of Château Haut-Bailly dates back to 1461, when vines were already cultivated there. The first significant owner was Thomas Barton. He was at the head of a major fine wine trading company of Bordeaux and had Irish origins which helped him developing the exportations of Château Haut-Bailly’s wine to England and Ireland. But the owner who shaped the estate as we know it today is Alcide Bellot des Minières who bought it in 1872 and built the Château that is still on the property today. His nickname was “King of Vintners” as he contributed a lot to the scientific researches concerning the wine sector. Thanks to his dedication and scientific work, Château Haut-Bailly reached the same price-level as First Classified Growths such as Château Lafite, Château Latour or Château Margaux. After his death, the owners of Château Haut-Bailly often changed but the estate was still classified in the Graves Classification. Since 1998, the estate belongs to Robert G Wilmers, an American banker and a wine lover who is involved in every step of the wine-making process and didn’t hesitate to invest a lot in Château Haut-Bailly. Nowadays, the vineyard is composed of 30 hectares, only planted of red grapes, and has an exceptional terroir, composed of sand, gravels and petrified sandstone with prehistoric fossil shells. 4 of those hectares are actually planted of centenarian vines, which are not grafted on American rootstocks like most of the French vines today as they resisted the phylloxera crisis in the 19th century. Nearby Bordeaux in the heart of a magnificent raised park, the Château Larrivet Haut-Brion has today one of the widest vineyards in the Pessac-Léognan region (72 ha in total). The Gervoson family, owner since 1987, opens the doors of this property for you, which, besides its château of classic style, includes a 13 ha park with a boat pond. Only 20 minutes away from Bordeaux and 30 minutes from the Bay of Arcachon, the Château Larrivet Haut-Brion is one of the most innovative châteaux of the Pessac-Léognan region. Latour Martillac refers the tower that was once part of a small fort built in Martillac in the 12th century by the forefathers of the famous philosopher and vine grower Montesquieu. Edouard Kressmann, wine merchant in Bordeaux since 1871, drew his attention on this estate in particular for the quality of its white wines. His eldest son, Alfred bought the estate in 1930, and developed the red vineyards with his son Jean, on the gravelly summits of the Martillac village. Together they designed the original label, with gold and sandy stripes, that decorate the bottles since 1934. Today, Tristan and Loïc Kressmann, Jean Kressmann's youngest sons, carry on the family tradition. Over time and owners, this magnificent estate set on a beautiful ridge of the prestigious Graves Pessac-Léognan has cultivated its memories and its land to some quiet and dreamless excellence. Baron Haussmann acquired the estate in 1864. He adored to develop properties with modern comforts and had a lot of work done at Rouillac, leaving his mark, which is still very noticeable today. He also introduced horses into the Rouillac story by having some very attractive stables built. During this period, the estate cultivated about 30 acres of vines and produced an excellent red wine. Napoleon III tasted it, when he was in the area and loved it. He made it a feature at the imperial table and spoke highly of its merits to Albert 1st, King of Belgium. In 2009, when Laurent Cisneros first came across the property, he fell in love with its sleeping beauty and decided to bond his future and that of his family to Rouillac. The 36-hectare (89-acre) estate is located in the south of greater Bordeaux and has the rare advantage of consisting of one single plot with 16 hectares (40 acres) of vines for making red wine and 5 acres of white. The soils are made up of remarkable beds of Tertiary gravel with smooth pebbles and fine stones providentially deposited there eons ago by the Garonne River. The temperate weather is very locally influenced by the nearby river and sea that bring mildness and regular humidity levels, so beneficial for the vines. In spring 2010, a superb 4-hectare (10-acre) gravel terroir was added to the estate, which will be planted with young vines, bringing the total area cultivated here to nearly 25 hectares over the next three years.

<urn:uuid:1b0acab9-44a8-480b-baf5-3d77cc23f962>

CC-MAIN-2024-10

https://www.alafrancaise.fr/en/bordeaux/chateaux-graves

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Publicly-funded schools in England get extra funding from the government to help them improve the attainment of their disadvantaged pupils. Evidence shows that pupils from disadvantaged backgrounds: The pupil premium grant is designed to allow schools to help disadvantaged pupils by improving their progress and the exam results they achieve. Schools get pupil premium funding based on the number of pupils they have from the following groups. Free School Meals: Schools get £1,345 for every primary aged pupiil, who claims free school meals, or who has claimed free school meals in the last 6 years. Looked-after and previously looked after children: Schools get £2,345 for every pupil who has left local authority care through adoption, a special guardianship order or child arrangements order. Local authorities get the same amount of money for each child that they are looking after, they must work with the school to decide how the money is used to support the child's oersonal education plan. Service Premium: The Service Premium is not part of the pupil premium as the rules to attract the service premium are different. Schools get £310 for every pupil with a parent who is serving in HM forces or has retired on a pension from the Ministry of Defence. The funding is to help with pastoral support. At Whiteparish All-Saints C of E Primary, our ambition for disadvantaged learners and vulnerable pupils is to ensure high quality education for all by prioritising our funding on strategies that make a difference to those pupils who experience disadvantage. As a whole school team, we are acutely aware of how disadvantage can impact on a pupil’s academic and social development and keep this at the forefront of our practice when meeting the needs of all pupils. We endeavour to use our pupil premium grant to ensure the greatest impact, both academically and socially, on those pupils identified as being disadvantaged and vulnerable. Key principles in the allocation of funding: We will aim to ensure that effective teaching, learning and assessment meets the needs of all pupils through rigorous analysis of data. Class teachers will identify specific intervention and support for individual pupils which will be reviewed at least termly. Alongside academic support, we will ensure that those pupils who have social, emotional and mental health needs will access high quality provision from appropriately trained adults. Steps to Success: Barriers and Challenges:

<urn:uuid:a1fcf0d6-9e3c-4573-8559-ba6d3d9ae88d>

CC-MAIN-2024-10

https://www.allsaints.wilts.sch.uk/pupil-premium/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

By Eynez Syazmeena | Focus Malaysia The Kuala Lumpur High Court was informed today that the Parliament has already passed a bill prohibiting the sale of nicotine-containing vapes and e-cigarettes to individuals under the age of 18. Senior federal counsel Ahmad Hanir Hambaly asserted that Health Minister Dr Zaliha Mustafa had the authority to remove nicotine liquid and gel from the list of controlled substances under the Poisons Act 1952 on March 31 of this year. Representing the minister in the face of a judicial review initiated by three health-related non-governmental organisations (NGOs) – the Malaysian Council for Tobacco Control (MCTC), the Malaysian Green Lung Association (MGLA) and Voice of the Children (VOC). Hanir noted that the Control of Smoking Products for Public Health Bill was passed by the Dewan Rakyat on Nov 30. This bill, a modified version of the generational endgame (GEG) bill, plays a role in supporting Dr. Zaliha’s decision to delist nicotine liquid and gel as scheduled poisons. The GEG bill initially aimed to prohibit those born after Jan 1, 2007, from purchasing or engaging in smoking. Hanir highlighted that with the passage of the bill, minors under 18 are now prohibited from smoking nicotine-containing vapes and e-cigarettes, and vendors are forbidden from selling such products to minors. However, the NGOs argued that Dr. Zaliha’s decision might lead to the easy availability of nicotine-containing vapes and e-cigarettes to children. Hanir defended Dr. Zaliha’s decision, stating that it was part of government efforts related to taxation as a means to control the distribution of smoking products in Malaysia. In response, the NGOs’ counsel Edmund Bon countered that the new bill has not yet been ratified into law by the Dewan Negara, making it unenforceable against the sale of nicotine-containing liquids and gel products to children. Edmund also pointed out that at the time of Dr Zaliha’s decision on March 31, there was no law forbidding the sale of these products to minors. Furthermore, Judge Wan Ahmad Farid Wan Salleh set Feb 7, 2024 for a decision on whether to allow the judicial review. On March 31, the Health Ministry exempted nicotine from the list of controlled substances under the Poisons Act with plans to introduce a new bill regulating smoking products and devices including nicotine in liquids and gels used in e-cigarettes and vapes. Meanwhile, in the run-up to the exemption, Malaysian Medical Association president Dr Muruga Raj Rajathurai expressed concern that once nicotine is removed from the Poisons Act, vapes containing the substance can then be sold to the public legally, with no control to prohibit the sale of these items to minors. The three NGOs then filed their legal challenge on June 30.

<urn:uuid:61a23be8-3a91-4b94-908f-be1c53c33183>

CC-MAIN-2024-10

https://www.amerbon.com/media/high-court-deliberates-legal-challenge-to-ban-nicotine

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

First Friday Mosaics - Using Italian Smalti in Mosaics TBD The FIRST FRIDAY of every month, 1030 am-noon. $15 On the first Friday of the month, we have a short 1.5-hour session - part social, part educational - on mosaic tips, tricks, and techniques offered by a variety of talented mosaic artists and guest speakers. Most sessions have a hands-on component, as well. It's a great way to learn what is going on in the world of mosaics and to practice techniques. Also, feel free to bring your mosaics to share with the group! Come for tips, practice, refreshments, and camaraderie! PRE-REGISTRATION ONLINE ($15) REQUIRED, so we can plan accordingly, thanks! TOPIC for TBD Date: Using Italian Smalti in Mosaics The world of mosaics is rich in form, style, and technique. In this First Friday Mosaics, Theresa Mertens of di Mosaico talks to you about smalti and stone mosaics. This style is unique, colorful, and dramatic. You will love the dense color range of smalti tile. Fun for you:Theresa will introduce you to the style and materials with a small hands-on project. Limited to 12 participants. Minimum age 16. Join us Friday, 1030 am to noon at Blue Raven Art School (720 E Prince Rd). Class and workshop registration fees are non-refundable. If you miss a class, you can take another of the same value within 3 months of the original one or give it to someone else. However, you need to send me an email to make these changes.

<urn:uuid:29e79c92-c3da-491d-96e1-a751cb8e48b0>

CC-MAIN-2024-10

https://www.andreaedmundson.art/store/p17/First_Friday_Mosaics.html

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

“For God so loved the world that he gave his only Son, so that everyone who believes in him may not perish but may have eternal life. “Indeed, God did not send the Son into the world to condemn the world, but in order that the world might be saved through him. Those who believe in him are not condemned; but those who do not believe are condemned already, because they have not believed in the name of the only Son of God. And this is the judgment, that the light has come into the world, and people loved darkness rather than light because their deeds were evil. For all who do evil hate the light and do not come to the light, so that their deeds may not be exposed. But those who do what is true come to the light, so that it may be clearly seen that their deeds have been done in God.” “For God so loved the world that he gave his only Son, so that everyone who believes in him may not perish but may have eternal life.” That’s John 3:16, the most famous verse in the Bible. Even non-believers know it, thanks to it being on display everywhere, although they may not understand it. The question is: do we understand it? In keeping with the pattern of recent reflections, I would like us to examine if we do, because this is one verse (along with the one that follows it) that actually summarizes our faith. If we say we are Christian, then it is vital we know what these verses mean. And know them well enough to be able to explain them to others. So, for something different today, let me give you a quiz. Do it with a friend to make it more interesting. Question: Why does God love the world so much, given what a miserable place it is, filled with all kinds of unsavory characters, including us! Church-going we might be; Christ-like we might not. So, in a universe of a billion galaxies each with a trillion planets and stars, why does Earth matter to him so much? It is not even a speck in the universe. And why do we? Then, Jesus says that everyone who believes in the Son may not perish. Question: Who is the Son? Ok, you know the answer to that one; it is Jesus, so next Question. Why do we need to believe in Jesus not to perish? And WHAT do we need to believe? That Jesus is God’s only Son? Or is there more we need to believe? How does believing stop us from perishing? And why are we perishing, anyway? To perish means to die, especially in an unpleasant way. But doesn’t everybody perish? How are you doing so far? Okay. Next question: Jesus says we will have eternal life. What does that mean? When does it begin? Where will we live this eternal life? Is it going to be different from this life we are leading now? If yes, how? Now all this is Christianity 101. They are really the most basic questions about the faith. See how many of these questions you can answer to a degree that truly satisfies you. Which means you get to the point where you understand it. Give it some serious thought, and when you are done, you might wanna compare your answers with those I provided in an earlier reflection (https://youtu.be/uhfTFhSpINU). How did you fare? If you didn’t fare too well, don’t feel bad. Sometimes the realization that we know so little about our faith might spur us on to learn more, and thus deepen our relationship with God. But regardless of how we fare, I hope we can all get to such a deep understanding of our faith, that we are able to explain it to others. Because, you see, if those who believe in him won’t perish, then what happens to those who don’t believe? And what responsibility do we have towards them? Of all the questions we asked today, this question is perhaps the most important.

<urn:uuid:f1c953bc-b3bd-4299-9389-1366a44fd3ea>

CC-MAIN-2024-10

https://www.aneelaranha.com/index.php/the-bite-sized-gospel/audio/item/177-april-22-2020-wednesday-faith-quiz-a-reflection-on-john-3-16-21

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

LONDON: UK advocacy group Hope not Hate says it has identified dozens of members of the country’s ruling Conservative (Tory) Party who have used social media to make anti-Muslim statements. It also cited “alarming” private polling, compiled for a report into allegations of Islamophobia in the party, that shows a large proportion of party members harbor disparaging views about Islam, including that the religion is “incompatible” with British culture. “In recent years, Hope not Hate has tracked, highlighted and campaigned against the poison of hatred impacting individual political parties,” the report said. “None have been immune. For several years, there have been well-documented incidents of Conservative Party MPs, councillors and locally elected representatives engaging in vile racism, particularly towards Muslims,” it added. “Muslim members have reported a lack of action when they complained. Many have resigned from the party in protest.” The report forms a broad submission by the group to an inquiry into discrimination in the party led by Prof. Swaran Singh of the University of Warwick, after an appeal for evidence. Allegations of Islamophobia have been raised recently by senior Tory politicians, including former Chancellor Sajid Javid and former party Chair Baroness Warsi. The inquiry itself has been criticized by the Muslim Council of Britain (MCB) for running the risk of ignoring “the systemic problems of Islamophobia in the party,” after Prime Minister Boris Johnson reneged on a pledge to focus on anti-Muslim prejudice, and instead opened the inquiry up to all instances of prejudice since 2015. Hope not Hate said it had reported more than 20 Tory councillors to the inquiry for incidents of Islamophobia. Meanwhile, in its poll of 1,200 Tory members carried out by YouGov, just 43 percent of respondents said they hold favorable views of Islam, with 47 percent saying they consider it “generally a threat” to British society. Almost a quarter claimed it breeds “intolerance.” Just 27 percent believe Islam to be compatible with life in the UK. In comparison, 75 percent of respondents said they have positive views of Sikhs in the UK, and 73 percent look favorably on Britain’s Hindu community. Hope not Hate said it had identified 40 cases of Tory activists or politicians using social media to post offensive anti-Muslim content. In one incident, a member posted offensive content about the 2019 Christchurch mosque massacre in New Zealand. Hope not Hate said the member, who was made to complete an “online diversity course,” was subsequently allowed back into the party, and continued to post Islamophobic content online. Another case saw a councillor suspended in 2018 for sharing an article that called Muslims living in France “parasites,” only to be re-admitted months later. The group said quiet re-admittance was standard practice for members disciplined for instances of Islamophobia. In one example, a female councillor was re-admitted after comparing an Asian man to a dog, saying: “He’s brown, he stinks, he can’t speak a word of English.” The group highlighted that this contradicted the following statement made by Johnson in 2019: “What we do in the Tory party is, when anybody is guilty of any kind of prejudice or discrimination against another group, then they’re out first bounce.” Hope not Hate’s Chief Executive Nick Lowles told The Times newspaper: “It’s been clear for a number of years that the Conservative Party has a deep problem with anti-Muslim prejudice. The evidence is clear; the only question is what the Conservatives decide to do with it.” The report suggests a number of measures to deal with Islamophobia. They include setting up a new independent complaints and disciplinary process, a transparent suspension system, and compulsory training for MPs and others on Islamophobia. An MCB spokesperson told Arab News: “For years, we’ve been alarmed at how entrenched deeply Islamophobic views are in the Conservative Party. This polling, coupled with the MCB’s dossier of over 300 members engaging in Islamophobia, is further evidence of how institutional, systemic and embedded in the culture of the Conservative Party this is.” The spokesperson added: “If the Conservative Party was serious about eradicating the concerning levels of vitriolic hate from amongst its membership, it would immediately suspend all those highlighted in this report and hold a truly independent inquiry specifically into Islamophobia, instead of this review into its complaints procedure which will serve as nothing more than a rubberstamping exercise, further kicking the can into the long grass. “Instead, all we’ve seen is a total dereliction of duty by successive prime ministers and party chairs to address Islamophobia within its ranks. The total absence of political leadership only serves to condone Islamophobic views and embolden racist sentiments.” A Tory spokesman said: “We take any complaint very seriously. There is currently an independent investigation into our complaints processes. We will consider any recommendations to further strengthen our procedures.” The UK’s Equality and Human Rights Commission, which recently launched an inquiry into allegations of systematic anti-Semitism in the UK’s main opposition Labour Party, said in May that before it decides whether to conduct its own formal inquiry into allegations of Tory Islamophobia, it will await the outcome of Singh’s investigation. Pre-emptive action would not be “proportionate,” the commission said.

<urn:uuid:8dea0444-ba8e-4772-8099-8d3e9e02ba95>

CC-MAIN-2024-10

https://www.arabnews.com/node/1742841/world

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

The term ‘major incident’ is a broad one and is widely ascribed to any event where there is a loss of life, a serious injury or substantial damage to property or the environment. While carbon dioxide (CO2) incidents are relatively uncommon, especially compared to their carbon monoxide counterparts, they can prove lethal in the wrong circumstances. If you’re a first responder, you have probably undergone training with index cards at some point in your career. This tried-and-tested method helps trainers provide information to downrange operators that should initiate a response or action from those operators. The uncontrolled and unpredictable nature of chemical, biological, radiological and nuclear (CBRN) incidents can place a substantial strain on the psychological and physical health of those tasked with emergency first response. While the importance of wellbeing in the workplace is a subject that has gained increasing momentum in the UK in response to rising mental health issues within the wider labour market, it is only recently that the mental health needs of first responders have started to receive more attention. Resilience and preparedness are at the heart of effective emergency response - and they are qualities that look set to prove increasingly important as the global CBRNe and HazMat community contends with the far-reaching impacts of COVID-19. As the far-reaching impacts of the pandemic dominate the world news, more and more people are being asked to work remotely in an effort to curb the spread of the virus. The National Ambulance Service Command and Control Guidance, published in April 2019, brings together lessons learned from recent major incidents and event responses both from within the UK and around the world, as well as drawing on the experiences of its partners in the Police and Fire and Rescue Service. One of the resounding messages of this document is the vital contribution that command decisions play in enhancing clinical outcomes, increasing survival rates and maintaining first responder safety.

<urn:uuid:b7f005f6-2cf0-4c62-a57e-dd587cbeb461>

CC-MAIN-2024-10

https://www.argonelectronics.com/blog/topic/first-responder

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

HOMIILY GIVEN BY CARDINAL SEÁN BRADY ST PATRICK’S CHURCH, DUNGANNON SATURDAY 24 OCTOBER 2009 I am very happy to be invited here today to celebrate 50 golden years of scouting in Dungannon. I will tell you why! So many times I have come here to Dungannon to say Mass and as we go from the Sacristy to the Church- now your most beautiful, newly refurbished Church – there is always this wonderful Guard of Honour of Scouts, Cubs and Beavers. There you are, in hail, rain or snow, and once I see the neckerchief, I know it is the Scouts and their leaders – on a Guard of Honour, offering a salute of respect and welcome. I thank you for that. I know that you are there to honour me, not as Seán Brady, but as the Successor of St. Patrick, the man who came to bring us something great and good – the man who came back to us despite the fact that when he was here the first time, we treated him rather badly by making him herd sheep and pigs and goats on the side of a mountain in hail, rain and snow, just like you in the Guard of Honour. I notice, with joy, that your Final Hymn is Hail Glorious St. Patrick. I once had the chance to say Mass for the Irish Soccer team. It was nineteen (19) years ago and they had reached the World Cup Final and were about to play Italy in Rome. It was the 29th of June, I think, and they too had, as their Final Hymn, Hail Glorious St. Patrick. I was told that they always sing that hymn at the top of their voices, especially the verse which goes like this. Hail Glorious St. Patrick Thy words were once strong Against Satan wiles And an infidel throng Not less is thy might Where in heaven thou art O come to our aid, In our battle take part. Today, like the month of January, we look back and we look forward. Back over fifty (50) years of Scouting in Dungannon. I thank God for all the good that came from that. We give thanks for that call which Aloysius McCourt and Patsy McCooey paid to Dean John Quinn one October night 50 years ago. We are grateful for the support of people like Dr McCluskey and Bernard McBride and Bertie Foley and many others who got the idea off the ground. We give thanks for the 1st Tyrone Scout Troop which soon became 1st Tyrone Scout Unit. We remember the fund-raising – like Bob a Job Week, – the weekend camps, summer camps, the overseas trips to Lourdes and Paris; the arrival of foreign Scouts and the building of the new Scout Den in 1970. I saw the question asked in 2004: Has Scouting Got a Future? It seems to me that the answer is this. Yes, it has got a future if there are enough people, so strongly convinced that Scouting has so much to offer that they are prepared to work hard to ensure that it has a future. So, as we look forward we hope that there will be parents and leaders, willing to work for the future of Scouting – people who appreciate the part that Scouting and organisations like it can play in helping young people become the kind of people their Creator wants them to become. It will have a future if there are Chaplains who will insist that Scouting is more than ‘Scouting’ in the literal sense of the word – the skills of military reconnaissance in every territory, using such skills as camouflage, disguise, mapping and survival. Today’s liturgy reminds us that there is more to Scouting than that. The rope – one of the gifts – carried up in the Presentation at the beginning – reminds us of God’s love for us. God’s love holds us always in a knot. Like a good knot, God’s love holds us safely –it will never slip. The motto of Irish Scouting is Bi Ullamh – Be prepared – be prepared for what? • Be prepared to help or to harass. To help of course. • Be prepared to recognise the presence of God’s love in our lives, or be prepared to ignore it. • Be prepared to see that we are put on this Earth to praise God – by doing the good we are supposed to do, or be prepared to enjoy ourselves all the time without paying any attention to what others want. We already said we are here to offer this Mass for all the benefits received through these past 50 years. Now is the time to stop and remember these benefits – one by one – and to really give thanks for them. Today we give thanks for all those who gave, and continue to give, freely and voluntarily of their free time to Scouting in Dungannon. They appreciated the true nature of the noble enterprise of education of children and young people. The parents are involved – and so also are the schools – they play the major part. But the local community has a part to play. The parish also has a big part to play in organisations like Scouting. Scouting includes adventure in the outdoors. It provides an opportunity to see the beauty of the sea and the mountains, the forests and the fields. The candle, carried up at the beginning, is a sign of the Light of Christ. The Light of Christ comes to us from two books – the Book of the Bible and we heard three readings from that today. The Light of Christ comes to us also from the Book of Nature – the Book of Creation. The Light of Christ shows us the Face of Christ so that we can model our lives on the life of Christ. Scouting involves working with friends in small groups. Jesus Christ spent a lot of his time working with a small group of friends. He called them his disciples. The work consisted of teaching them his way of doing things. He said he had come, not to be served but to serve and give his life for others. He told his friends that they would have to do the same. Service to others is a big part of Scouting. Of course you could be convinced of the benefits which Scouting brings and still not be prepared for the sacrifices which Scouting involves. To get that generosity we need to pray – to pray constantly – especially to pray the Prayer of the Sunday Mass. There we are reminded of how much Jesus gave and we ask to be made like him. I hope that I have said enough to convince you that Scouting has a great future. One of the priests I most admired was Father Torlac O’Reilly, a priest from my native diocese of Kilmore. He bought a minibus to bring Scouts around. He used to give it to me to bring young footballers to matches. Father Torlac spent a lot of his free time in Scouting – building a scout Den – going on scout outings – producing a Scout pantomime – praying with Scouts and praying for Scouts – because he loved young people with the love of Jesus Christ. Father Torlac died about ten years ago. There were tears in the eyes of many young people, and of the not so young, when they laid him to rest in the sticky, grey soil of Drung cemetery outside Cavan town. Yes, Scouting has a great future for those who take the time to look at it and see what it really involves.

<urn:uuid:9babe8be-cd7c-4ab9-b02a-26c4379216bf>

CC-MAIN-2024-10

https://www.armagharchdiocese.org/24-october-50th-anniversary-of-1st-tyrone-scout-union/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Rembrandt van Rijn was a Dutch painter and etcher who is widely considered one of the greatest painters and printmakers in European art history. He was born on July 15, 1606, in Leiden, Netherlands, to Harmen Gerritszoon van Rijn and Neeltgen Willemsdochter van Zuytbrouck. Rembrandt's parents were both from prominent families in Leiden, and his father was a miller. As a child, Rembrandt showed an early interest in art and attended Latin school in Leiden. He then went on to study at the University of Leiden for a brief period but left without obtaining a degree to pursue a career in art. He began his artistic training under a local master, Jacob van Swanenburgh, and later studied with Pieter Lastman in Amsterdam. In 1634, Rembrandt married Saskia van Uylenburgh, the cousin of a prominent art dealer in Amsterdam. The couple had four children, but only one, Titus, survived into adulthood. Saskia died in 1642, and Rembrandt later remarried to Hendrickje Stoffels, who was his common-law wife until her death in 1663. Throughout his career, Rembrandt worked in a number of different locations, including Leiden, Amsterdam, and The Hague. He was greatly influenced by the work of Caravaggio and the Utrecht Caravaggists, as well as the Northern Renaissance painters, such as Albrecht Dürer and Lucas van Leyden. Rembrandt's technique was characterized by his use of light and shadow to create dramatic effects and his ability to capture emotion and expression in his subjects. He was also known for his masterful use of etching and was a prolific printmaker throughout his career. Rembrandt's footprint on the art world can be seen in his influence on later artists, particularly the Dutch Masters of the Golden Age. His work has also had a lasting impact on the development of portrait painting and the use of light and shadow in art. Here are five of Rembrandt's most important paintings: The Night Watch (1642): This monumental painting is one of Rembrandt's most famous works and is considered a masterpiece of the Dutch Golden Age. The painting depicts a group of militia members in Amsterdam and is notable for its use of light and shadow to create a sense of movement and drama. The Anatomy Lesson of Dr. Nicolaes Tulp (1632): This painting depicts a public dissection of a criminal and is notable for its realism and attention to detail. The painting was commissioned by the Amsterdam Guild of Surgeons and is considered a groundbreaking work in the history of medical art. Self-Portrait with Two Circles (1661): This painting is one of Rembrandt's most famous self-portraits and is notable for its raw emotion and introspection. The painting shows Rembrandt at the height of his career and is considered a masterful example of his use of light and shadow. The Jewish Bride (c. 1665): This painting is considered one of Rembrandt's most beautiful and enigmatic works. The painting depicts an intimate moment between a man and a woman and is notable for its tender emotion and rich color. The Syndics of the Drapers' Guild (1662): This painting depicts a group of textile merchants in Amsterdam and is notable for its attention to detail and realistic portrayal of the figures. The painting is also notable for its use of light and shadow to create a sense of depth and realism.

<urn:uuid:d1b5a4e2-4832-4e97-a7f3-e08fe52df985>

CC-MAIN-2024-10

https://www.artprinta.com/collections/rembrandt-van-rijn/walters-art-museum

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

How a New Working Group is Supporting Security Mental Health For the last two years I have been a judge of a UK-based award program, The Officers of Distinction Awards, run by the ACS Pacesetters organization. In 2021, of the approximately 90 entries, around one-third related to dealing with a mental health incident. In the 2022 awards, that number grew to approximately two-thirds. These entries, too often, involved activities such as dragging people from the edges of parking garage roofs or from trainlines as they tried to end their lives. This type of incident indicates two main issues in relation to security officers—how to respond to external mental health incidents and how to protect their own wellbeing. There seems to be a need for frontline security to have some knowledge of and training on mental health awareness and to have some training and a toolkit on how to respond and react to people who are suffering. They also need to have an awareness of how these incidents affect their own mental health and the health of their colleagues. Additionally, employers need to have some support mechanisms in place. Frontline security professionals often work long hours, are (generally) not especially well paid, and the important role they play is seldom acknowledged. They are frequently exposed to verbal and physical abuse, and the instances of this have increased during the COVID-19 lockdown, The Guardian reported. Whilst they are different, there are clear and established links between verbal/physical abuse and mental health issues. A 2021 report from Policing and Society, an international policy and research journal, found that 39.3 percent of security professionals surveyed were showing symptoms of post-traumatic stress disorder (PTSD), and that “many of the security operatives suffered varying degrees of verbal abuse and threats of physical violence with a number reporting acts of violence to themselves and other security operatives during the course of their employment.” The report also found a “lack of provision of mental health and wellbeing services provided by the security companies to their employees and managers in general unable or unwilling to accept that some employees were suffering from poor mental health and wellbeing.” In addition to just doing the right to support colleagues, there are practical reasons to provide mental health support: reducing absenteeism and presenteeism, lower staff turnover, higher productivity. It is not hard to find evidence of this. - The Telegraph reported on 29 August 2022 that “Police officers took a record 500,000 days off because of mental ill health, new data have revealed, as a former watchdog blamed the trauma of dealing with the sick and dying during pandemic.” - Leaving mental health unaddressed is expensive. The UK’s Office for National Statistics’ (ONS) Labour Force Survey has found that that 17.5 million working days were lost due to mental health-related sickness absences in 2018 and 2019, costing the economy at least £2.4billion. A 2019 survey by Deloitte in Canada showed actual economic cost of mental health was CAD $50 billion. In the United States, according to the Centers for Disease Control and Prevention (CDC), depression alone causes an estimated 200 million lost workdays each year, costing employers between $17 billion and $44 billion. Employees with depression miss six to 25 more days of work per year and the illness’s effect on productivity affects between 13 to 29 percent of their time at work. In addition, a 2022 McKinsey report found that 30 percent of jobless people surveyed left work because of physical health, and 15 percent left because of mental health reasons (up from 13 percent the year before). - Investing in mental health pays off. The same study from Deloitte found that for every $1 invested in workplace mental health, the median yearly return is $1.62. That climbs to $2.18 if the program has been in place for three years or more. A 2014 report by PWC in Australia showed that every “dollar invested on a single action designed to improve mental health, on average business can expect to see a return on investment (ROI) of $2.30. This represents a 33 percent reduction in absenteeism, presentism, and compensation claims.” Additionally, staff turnover is reduced if people are supported, which represents a saving of time and money in finding replacements. Whilst mental health problems can affect anyone, security is still very much a male-dominated profession (the gender balance is improving), and men are generally less good at talking about and seeking help for their mental health. Men are around three times more likely to take their own lives for example—in the United Kingdom, three-quarters of registered suicides in 2018 were among men, and that has been the case since the mid-1990s. The stigma about seeking help for mental health and wellbeing issues is greater than for people suffering from a physical medical condition. For many—especially in the security profession—the default position is just to muscle through mental health challenges, which is often impossible. “The numbers are undeniable and organizations can no longer look the other way when it comes to addressing the mental health challenges their staff face on a daily basis,” says Tim McCreight, CPP, 2023 president of ASIS International. “This is epidemic of global proportion. For example, in the United States alone, healthcare workers are five times more likely to experience workplace violence than employees in all other industries. Protecting the psychological and physical health of employees needs to be a workplace priority the world over. ASIS International has a pivotal role to play in supporting security professionals and others with tools to not only protect themselves and others as well as prevent such acts in a variety of workplace settings.” So, how can we help? Clearly there are improvements we can make, and although we cannot fix this easily, we need to make a start. In 2022, I approached Jessica Lombardo, vice president of Member Engagement at ASIS International, about forming a Subject Area Community for mental health. The approach was well received and subsequently the Mental Health and Wellness Working Group was launched. This is accessible to ASIS members through the members-only Connects platform and offers resources and support for security professionals. The current mission statement is: “This is an open community for all ASIS members interested in having an open dialogue and building a library of shared resources aimed at helping security professionals support their team’s mental health and wellness.” The group is building a library of resources (articles, videos, webinars, etc.) and having conversations around mental health issues, discussing good practices, and ideally producing some suggestions that members can take away and apply in their own working environments. Recently, ASIS member John Rodriguez has joined the working group’s leadership, and we are looking at ways of perhaps widening it to encompass security culture and how this can evolve to make the workplace more accepting. I would encourage all ASIS members to join the group, share resources and experiences, and help improve the wellbeing of our security teams by reducing the stigma around discussing mental health. Mike Hurst, CPP, CPOI, has worked in security and fire industries since 1988. In 1992, he joined executive security recruitment and consultancy firm HJA Consult. He is the director of the International Foundation for Protection Officers (IFPO) in the United Kingdom and Ireland, and he serves in various functions throughout ASIS International, including as a past-chair of ASIS International UK and as secretary of the Extremism and Political Instability Community. He is also an ambassador at veterans’ mental health charity PTSD Revolution.

<urn:uuid:fa0c33b0-50c9-4766-ad97-a14c48c150d1>

CC-MAIN-2024-10

https://www.asisonline.org/security-management-magazine/articles/2023/02/mental-health-for-security/how-a-new-working-group-is-supporting-security-mental-health/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

- R&D for Rapid Prototyping and Rapid Tooling: works on new innovative processes and their associated calculation algorithms using its proprietary rapid prototyping process Stratoconception® and its associated software Stratoconcept® III. - R&D for high-speed machining and cutting monitoring: study of advanced machining processes, in particular the experimental study of cutting techniques and process monitoring. This involves the measurement and study of thermal fields at the part/tool and chip/tool interfaces by incorporated microsensors connected to the ACTARUS® system and its TWS® software. - Numerical Rapid Product Development: CIRTES own a fully-equipped platform including all techniques of the numerical rapid product development chain (3D digitalization, numerical simulation, virtual reality, rapid prototyping, rapid tooling, rapid manufacturing, 5 axes machining and 3D control). - Crédit Impôt Recherche - CRT label - Catégorie: ASRC member - Sectors of application: Mechanical engineering - Energy - Transports - Textiles, Clothing, Leather, Arts, Luxury goods - Wood, Furniture - Paper, Cardboard - Aeronautics, Spacial, Defense - Publishing, Printing, Packaging - Services provided: Research and development - Prototyping, pilot lots, industrialization – Study and integration of rapid tooling by Stratoconception® for sand casting and composite forming – R&D works for rapid tooling (in steel&aluminum) by Stratoconception® for plastic injection moulding and die casting. Integration of cooling channels – Integration of numerical rapid product development chain for SMEs – Study of basic physical phenomena and experimental study of cutting techniques for the production of high added value components, instrumentation of manufacturing processes – R&D works on cryogenic machining for complex materials. – Integration of rapid tooling by stratoconception for sand casting, application to short runs of medium to large mechanical parts for St Gobain – PAM – Study and manufacturing of aluminum rapid tooling by Stratoconception for the production of lost-patterns for automobile engine cylinder heads in aluminum casting for PSA – Integration of numerical rapid product development chain for SMEs, for the production of glass paste art objects for DAUM – Study of basic physical phenomena and experimental study of cutting techniques for the manufacturing of high-added value parts for the civil nuclear industry for AREVA – Study of tools and equipments for cryogenic machining for complex materials.

<urn:uuid:5ab1bc36-5b59-451e-bdb9-6de6d8ae7c87>

CC-MAIN-2024-10

https://www.asrc.fr/en/portfolio/cirtes/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Table of Contents Can music cultural appropriation? When an artist tries to profit from the music style without showing respect to the culture, they also demonstrate cultural appropriation, said Gabriella Duran, a freshman global studies and political science major. “Music is an art form, and we can learn so much from it when it’s done correctly,” Duran said. How is war declared? In the United States, Congress, which makes the rules for the military, has the power under the constitution to “declare war”. War declarations have the force of law and are intended to be executed by the President as “commander in chief” of the armed forces. What are examples of cultural appropriation? Examples of Cultural Appropriation - Intellectual property. - Clothing and fashion. - Religious symbols. How do you culturally appreciate? One of the best ways to understand and appreciate another culture is by listening to those who are a part of the fabric of that society. Listen to their stories, understand the implications behind the aspects of their culture that you are interested in, and use that understanding to broaden your worldview. What is a direct appropriation? “Direct Appropriation” is an appropriation made in biennial or annual budget bills and is for a limited period of time, usually within the biennium. “Standing Appropriation” is the authority to spend a pre-determined dollar annual amount for an activity for a specific period of time or indefinitely. (Example: MS 240A. What is artistic appropriation? Appropriation in art and art history refers to the practice of artists using pre-existing objects or images in their art with little transformation of the original. What does appropriation mean in government? appropriation – The provision of funds, through an annual appropriations act or a permanent law, for federal agencies to make payments out of the Treasury for specified purposes. The formal federal spending process consists of two sequential steps: authorization and then appropriation. What is the difference between cultural appreciation and cultural appropriation? First, let’s distinguish the two; appreciation is when someone seeks to understand and learn about another culture in an effort to broaden their perspective and connect with others cross-culturally whereas appropriation is simply taking, adopting or “cherry-picking” one aspect of a culture that is not your own and … Is the president considered a veteran? The US Constitution defines the president as the commander-in-chief of the Army, Navy, and state militias. The VA defines a veteran as person who served in active military, naval, or air service who has been released honorably. By definition doesn’t the president of the United States qualify as a veteran? What means appropriation? Appropriation is when money is set aside money for a specific and particular purpose or purposes. A company or a government appropriates funds in order to delegate cash for the necessities of its business operations. Appropriations for the U.S. federal government are decided by Congress through various committees. Does the President approve the budget? The president submits a budget to Congress by the first Monday in February every year. The budget contains estimates of federal government income and spending for the upcoming fiscal year and also recommends funding levels for the federal government. Is cultural appropriation ethical? Many kinds of cultural appropriation have been morally criticized. Roughly, the claim is that members of some cultures shouldn’t take property, styles, or ideas from other cultures under certain conditions. Which programs get funded the most by the budget? As the chart below shows, three major areas of spending make up the majority of the budget: Social Security: In 2019, 23 percent of the budget, or $1 trillion, paid for Social Security, which provided monthly retirement benefits averaging $1,503 to 45 million retired workers in December 2019. How do you identify cultural appropriation? Other markers of appropriation include presenting elements of a culture in ways that: - give a skewed or inaccurate perspective of that culture. - reinforce stereotypes. - conflict with the intended use of those elements. - take credit or compensation from the original creators. What is the purpose of appropriation? Appropriation accounts show how companies and governments distribute their funds. Companies and governments appropriate funds in order to delegate cash for the necessities of business operations. In general accounting, appropriation accounts are mainly prepared by partnerships and limited liability companies. What is the difference between an authorization and an appropriation? First, authorization bills establish, continue, or modify agencies or programs. Second, appropriations measures may provide spending for the agencies and programs previously authorized. Authorization acts establish, continue, or modify agencies or programs. What is a letter of appropriation? Ask your bank to pay particular bills out of your account (sole name) Use this letter when you need to ask your bank to pay particular bills out of your account from money you have paid in. This is known as exercising your ‘first right of appropriation’. Sign each letter and enclose a copy of your budget if needed. What is a capital appropriation? Appropriation is the process of allocating capital for specific purposes. Companies, governments, and individuals all appropriate capital for specific objectives. The categorical allocation of expenses exemplifies a manufacturing company’s appropriation of capital. What culture does hip hop represent? What are different types of appropriation? There are three types of appropriations bills: regular appropriations bills, continuing resolutions, and supplemental appropriations bills. In any given fiscal year, all three may be used. Is hip hop dancing cultural appropriation? It is not a genre to use as a medium to mimic others’ cultures in exchange for a lack of one’s own. However, hip hop has been susceptible to cultural appropriation which has led to black people being reduced to stereotypical characterizations of their heritage. How are government funds appropriated? How are government funds appropriated? “The President shall submit to the Congress within 30 days from the opening of every regular session, as the basis of the general appropriation bill (GAB), a budget of expenditures and sources of financing including receipts from Page 2 existing and proposed revenue measures.” 5. Who approves the budget of the government? Why does the government prepare a new budget every year? accordance with the Constitution. The Charter requires the President to submit a budget of expenditures and sources of financing within 30 days from the opening of every regular session of Congress. What is an annual appropriation? Appropriation: A law of Congress that provides an agency with budget authority. Annual Appropriations (also called fiscal year or 1-year appropriations) are made for a specified fiscal year and are available for obligation only during the fiscal year for which made. Can a president declare war without Congress? It provides that the president can send the U.S. Armed Forces into action abroad only by declaration of war by Congress, “statutory authorization,” or in case of “a national emergency created by attack upon the United States, its territories or possessions, or its armed forces.” Does the president control the military? In this capacity, the president exercises supreme operational command and control over all military personnel and militia members, and has plenary power to launch, direct and supervise military operations, order or authorize the deployment of troops, unilaterally launch nuclear weapons, and form military policy with …

<urn:uuid:c47f06ba-6077-469b-ad3d-89a2fcd6945b>

CC-MAIN-2024-10

https://www.assemblymade.com/2021/12/can-music-cultural-appropriation/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Yield: 1 Servings |-The be-all, end-all of Saudi Arabia is the Arabic coffee. I am including the author's remarks (with mine in parentheses) since this is exactly how it is served. Only on the women's side of the party, imagine so much incense burning you can't see across the room for the smoke! Arabic coffee can be prepared in various ways, but always contains more cardamom than coffee, and no sugar (it's made from green coffee beans and has a truly UNIQUE flavor, once described to me as Clorox bleach). It is the traditional welcoming drink served on every truly Arabic occasion such as weddings, receptions, gatherings, meetings, and camel races (also at any gathering of more than four people). It is served almost immediately to the guests on arrival, usually before the meal (Parties start about 9 pm, the meal begins about midnight. On the ladies side, the women make a mad rush to the food, eat very quickly, and leave immediately. Coffee goes around twice, then hot tea is brought out, it goes around once, maybe twice. Stuffed dates, some with sesame seeds, some without, are passed out with the coffee. Belgium chocolates are presented to the guests with the tea. The chocolates are individually wrapped and brought around in a large basket by a maid. Only one or two chocolates are allowed. These were really wonderful, just about the best part of the party and I'm not even a chocolate fancier). It should be served from the traditional pot called the dallah (which has a chunk of fiberous material stuck in the spout to serve as a filter) into very small Arabic coffee cups filled only half full (these cups hold maybe half a cup of liquid anyway but when you have to drink the coffee it seems like a LOT more). The server then goes around with the pot to refill any cup that is empty, and continues to refill cups until the guest gently wobbles his cup to indicate he has had enough. It is customary to take 2 or 3 cups. More than three is greedy, less than two is not polite (this is no joke. One way to upset your hostess real fast is to wobble after choking down the first cup. This is why the dates are so important. Without them to help kill the taste of the coffee, most of us would never have gotten to the tea part of the ritual, let alone the meal). GAHWA `ARABIYAH Arabic Coffee 1 level Tbsp Arabic coffee 2 level Tbsp coarsely ground cardamom 2 cups water Put the coffee in a pan and warm it on a low heat for a few minutes, mixing with a spoon. Add the water, bring to a boil, and boil 3 or 4 minutes. Pour the boiled coffee through a filter into the dallah and add the cardamom. Return to the heat, bring to a boil once more, then simmer 20 minutes. (Cardamom is very expensive and you can tell how well you're liked by the amount of cardamom in the coffee. Lots of cardamom makes the coffee actually taste good!) "The son of a duck is a floater." Arabic proverb Mint Tea SHAY BI NA'NA' Mint Tea 4 tsp regular loose leaf tea 1 handful of mint sprigs, washed and drained, leaves, stems, and all 4 to 6 tsp sugar Put tea and sugar in a heated teapot (sugar can be added later at serving time). Bring 6 cups of water to a boil, add to the pot, stir, and allow to settle. Add the mint sprigs whole. Bring the teapot to a boil then put aside to brew for 5 minutes. Makes 6 to 8 small glasses. Teapots used are highly ornate tea kettles made of metal. I brought home several kinds but don't know how safe it would be to actually use them. Well, I do have an aluminum one that I've seen in use in Saudi homes, but the brass and copper ones will just sit on the shelf. "I am a prince and you are a prince, so who will drive the donkeys?" Arabic proverb

<urn:uuid:16500cf6-dfcf-481e-bb6a-7a96fbd80a9e>

CC-MAIN-2024-10

https://www.astray.com/recipes/?show=Arabic+coffee

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Youth Offenders Act The Young Offenders Act 1997 passed through Parliament in June 1997 and becomes effective on 6 April 1998. It is the result of 10 years of trials and reform of the Juvenile Justice System. The Young Offenders Act 1997 changes the way police and the justice system deal with young offenders. It actively seeks to steer young offenders away from the court by directing them to alternative forms of intervention. It provides a new more constructive pro for dealing with young people who break the law. Currently, police have the option to give a warning on the run or a caution. Police can use them but do not have to explain why they did not. Under the Act, police must clearly justify each decision. The Act aims to make young offenders take responsibility for their actions, acknowledge the rights of the victim, avoid the cost and time of a court appearance and most importantly – steer young offenders away from detention. They achieve this by holding a Youth Justice Conference. Conference schemes already exist in Canada, New Zealand and South Africa. The Young Offenders Act 1997 responds to a number of complex and sensitive issues identified by the Government. It aims to: - make young offenders responsible for their actions and to encourage their families and communities to share this responsibility; - strengthen the rights of the victim and repair some of the damage caused by crime; - involve the victims and their families in the conference decision-making process; - make the juvenile justice system more responsive to individual circumstances; - reduce the time and costs involved in the court system; - reduce the human costs of too many young people in detention; - improve public confidence in the juvenile justice system.

<urn:uuid:dbf7593b-4cc0-467e-96c7-a7dcb1144906>

CC-MAIN-2024-10

https://www.australianpolice.com.au/youth-offenders-act/?print=print

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Creating a Mass Add Massing to a Model – Exercise Now that we have our reference planes all set, we can add our massing. Yes, you can add massing without reference planes, but they just make it much more accurate. To add massing to a model, follow these steps: - Open Revit. - Open your architectural model. - Open the Section 1 view. - In Properties, rename the view to Garden Roof Section. - Type RF to start the Ref Plane command. - Ensure the Garden Roof subcategory is selected. - Select the Pick Lines option in the Draw panel. In the Options Bar, set the Offset to 8′-0″. - Pick the left vertical reference plane created earlier, and watch for a blue dashed line to indicate which side the new reference plane will be offset from, as shown below. Ensure it is being offset to the right. - Use the same steps to create another reference plane, but this time offset it to the left. - On the Modify tab, click the Aligned Dimension button. - Select the four vertical reference planes, then select an area above them to place the dimension. - Note the crossed-out EQ text near the center of the dimension line. Click on it to enable the equal spacing of the reference planes. - Select the roof structure and in the contextual tab, click Selection Box, as shown below. - Adjust the four sides of the section box to enlarge it. - Rename the view to Garden Roof 3D. - Close all other views except for Garden Roof 3D and Garden Roof Section. - Tile the two views using the WT keyboard shortcut for Tile Windows. - Use the ZA shortcut to zoom extents the model in all open views. - In the Garden Roof Section view, create one more reference plane 4′-0″ above the Atrium Roof level by picking and offsetting from the Atrium level line. - On the Massing & Site tab, click the In-Place Mass button. - Revit will enable the Show Mass mode. That is fine. Click Close. - In the Name dialog box, name the mass Garden Roof. - On the Draw panel, click the Spline Through Points button. - In the Work Plane dialog box, set the work plane to Reference Plane : Garden-01. - Draw a spline similar to the one shown below. - Press <Esc>. - Click the Spline Through Points button again. - In the Placement Plane drop-down list, select Garden-02, as shown below. - Draw another spline on the Garden-02 reference plane. - For the splines on reference planes Garden-03 through Garden-06, use Pick Lines in the Draw panel. Your splines should look similar to those shown below. - Hold down <Ctrl> and select all six splines in the sequence they were created in. - In the Form panel, click Create Form. - Click Finish Mass. - Your form should look similar to the one shown below. - If you get a warning that says Mass contains only mesh geometry, which can’t be used to compute Mass Floors, volume, or surface area, that’s OK. - Save the model. You are all set to apply an actual Revit surface.

<urn:uuid:3327484d-390d-469a-a4be-805086ffe8ee>

CC-MAIN-2024-10

https://www.autodesk.com/learn/ondemand/course/conceptual-design-for-architects/unit/ciCuJNhN8qYxcUQar8QpS

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Ransomware is up 13%, an increase as large as the five previous years combined, according to the Verizon DBIR. Credential harvesting and phishing are the top two vectors leading to ransomware. As we say, stop phishing, stop ransomware. 35% of ransomware attacks start with email. If you don't stop phishing, you can't stop ransomware. And stopping phishing starts with preventing malicious and dangerous emails from ever reaching the inbox. - 82% of breaches involved the human element. And you want threats in your inbox before they are removed? - Phishing remains the top cause of social engineering attacks. Pretexting (Verizon's term for BEC attacks) takes up 27% and the majority of those come from stolen credentials. See the full report here.

<urn:uuid:b8a8251c-7192-4e55-92d7-b592b581bbdb>

CC-MAIN-2024-10

https://www.avanan.com/blog/verizon-dbir-stop-phishing-stop-ransomware

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Girl Names of Combination theme Combination names for baby girls, with 523 entries. Combination names for girls possibly found its beginnings in the European medieval practice of giving children a middle name, often after a saint. It was believed that the children would be protected by the saint after whom they were named. The combination of a first and middle name spread throughout Europe in subsequent centuries, where double-barreled surnames then became popular in England with the upper classes. Another type of combination name is a blended name, i.e. with components of two separate names, eg. Maryann. Combination names are rather popular as baby girl names. The names' popularity increased from the 1900s up to the 1930s; before that, they were of modest use only. Their usage peaked in 1933 with 2.709% of baby girls being given Combination names. Within the top 1000 baby names then, there were 29 Combination names. The names have slipped in popularity since then. In 2018, their total usage was 1.186% with 26 Combination names listed among the top 1000. Among all Combination names, Brooklyn (English) was the most widely used, with a ranking of #47 and a usage of 0.2498%.

<urn:uuid:8ac8a04c-a15e-41cb-81de-e8831f26c612>

CC-MAIN-2024-10

https://www.babynamespedia.com/names/girl/combination-theme

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

PLANTING, GROWING & MAINTAINING PLANTING & MAINTENANCE GUIDES With your purchase, you receive an easy-to-follow planting guide on how best to prepare your garden, plant & care for your new bamboo. Go home confident & stress free! Our guides are written with 25+ years of experience with bamboo, to assist you in achieving the best results in the shortest amount of time! We are proud of the high quality customer service we offer and ensure all our customers are equipped with the instructions and advice to achieve the best results with their bamboo. We offer extensive knowledge, assistance before AND after your purchase. Any time you have questions, we are happy to help. We also stock all of the wonderful planting products we recommend to use with bamboo. If bamboo love it, we have it! Bamboo can be left in their natural beautiful state and be low maintenance plants, especially if they are established well. However, just like hedges or trees, if you wish to 'manicure' your plants and create a certain look that you are after, you can! Read below on the best way to maintain your bamboo, depending on your needs. TRIMMING YOUR BAMBOO SHORTER Bamboos are essentially a giant grass, so there is no damage done if you want to trim your bamboos shorter. Once the culms (poles) have been cut shorter, they will not re-grow taller from that cut point. This means no regular maintenance on already trimmed poles! You will still have branches below as normal, in fact it will get bushier from trimming. But don't fear, if you trim too short, you will still get new shoots regrowing from the ground level each growing season to refresh the clump. It will grow back just like a bad haircut! Another great benefit is the majority of smaller screening bamboos are FLEXIBLE! This means you can stand at ground level, select the culm you want to trim, bend it down and trim it off! NO LADDERS! This makes trimming super easy and convenient. And, you only need to trim the new shoots that grow once a year! The larger, thicker culms on big bamboos are not flexible, but can still be trimmed with no damage to the bamboos. Keep in mind that some of these beautiful large species look best with their natural height and shape, so you would not want to ruin the natural state by trimming too short. Perhaps select a smaller species instead. Different species of bamboo have different levels of bushiness, and amount of branches on the culms. Some species come naturally clean stemmed and feature the poles with foliage up the top. Other great screening species are bushy from the top down to ground level. A commonly desired look is cleaning out the lower foliage of a bamboo, to feature the culms colour or style. This will create a very sleek modern look. Doing this also allows air flow and light through the lower plant. A great proportion is the bottom 1/3 cleaned out, and the top 2/3 left bushy. You can also create a 'topiary' effect on certain species. You can trim BRANCHES shorter, if, for example, your bamboo has some long branches growing over a pathway. If you don't want to remove the entire branch & lose some screening, simply trim the branch to the preferred length. Generally speaking your bamboo branches won't prolifically grow back these removed branches, so you won't be maintaining this regularly. On the flip side, if you trim too much and want some density back, you can encourage new growth with fertiliser water & some TLC. REDUCING YOUR BAMBOO Clumping bamboo grow in a circular shape, forming an area full of stems - what we refer to as 'footprint' in the earth. The typical footprint size that your bamboo will naturally stop growing at depends on the species. Each species has different natural dimensions, just like dogs! You can read more about this on our 'Running vs Clumping' page. If you have a clumping bamboo and have decided to plant it into a narrower garden bed (provided you chose the right species for this), or you already have a clumping bamboo and wish to reduce its size, you can do the following: As new shoots grow from the ground, they will generally grow on the outer ring of the bamboos clump, expanding the size of the clump until fully grown. You can prevent this by placing a root barrier down into the earth and physically stopping the bamboo from being able to expand to its natural clump size. (Note: the clumping bamboo don't spread invasively, they simply expand outward until fully grown, just like a bird of paradise plant does). You can also remove new shoots as they emerge; while still young the shoots are soft and 'snappable' almost like a carrot. You can simply kick these shoots over, or cut them off. Do not remove them from their roots. This is unnecessary and can affect the rest of the plant. Similarly, you can also cut down any fully grown culms if you want to now reduce the size of the grown bamboo. THINNING OUT YOUR Different species of bamboo grow to different densities, meaning some can have a very 'full' clump with lots of culms; where other species have an 'open' clump with fewer culms with lots of space between them. If your preference is to maintain your bamboo in a less dense state, you can: Prevent your growing bamboo from becoming too full throughout establishment. Each growing season the bamboo will send up a certain amount of new shoots. You can pick and choose how many of these shoots you wish to keep in the clump to grow, and how many you remove. While still young, the bamboo shoots are soft and 'snappable' almost like a carrot. You can simply kick these shoots over, or cut them off. Do not remove them from their 'roots'. This is unnecessary and can affect the rest of the plant. These new shoots are also edible! This is how they are harvested. The second way you can thin out your bamboo clump is after your bamboo has established and grown too dense for your preference, you can cut down any fully grown culms. You can again pick and choose which culms you remove and which you keep. Thin out your bamboo as much as you want! As they are a giant grass, they will naturally regenerate new shoots to freshen up the clump the following season. You can repeat this as often as you prefer, or leave your bamboo natural and low maintenance! If you have any questions on your particular bamboo circumstances, please ask! Our friendly and knowledgeable staff are trained in species identification, selection & best uses for all species of bamboo. They can help answer any questions or concerns you have about planting growing or maintenance on different species. Send us an email, call in or visit us instore!

<urn:uuid:4c038830-ed89-4372-8d11-2fbb7e2ca86f>

CC-MAIN-2024-10

https://www.bamboodownunder.com.au/planting-growing-maintaining-bamboo

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

In the second part of this series, we explore AI’s potential impact on coffee traders, producers, and Q Graders. BY VASILEIA FANARIOTI SENIOR ONLINE CORRESPONDENT Cover photo courtesy of Demetria In the first part of our exploration into the impact of artificial intelligence (AI) on the coffee industry, we uncovered a landscape of innovation, optimization, and precision. With new technology benefiting coffee-machine manufacturing and aiming to enhance the art of roasting, AI seems to have the potential to reshape many facets of the coffee journey. Now in the second part of our story, we delve deeper into the potential impact and influence of AI on coffee traders, producers, and warehouse facilities, as well as Q Graders. Data-Driven Decision-Making Through AI By collecting and analyzing large-scale data, AI solutions also facilitate informed decision-making throughout the coffee value chain. From farm-management practices to trading strategies and roasting profiles, AI-powered analytics aim to help stakeholders optimize processes and enhance quality. The insights derived from AI-driven data analysis enable proactive adjustments and improvements, which can ensure efficiency and consistency in coffee production and trade. Demetria, an Israeli-Colombian agrotechnology startup, harnesses AI to match each coffee bean profile with the industry-standard coffee flavor wheel. Utilizing a handheld near-infrared (NIR) spectrometer and a machine learning algorithm, Demetria creates a chemical “fingerprint“ of each bean. The fingerprint is mapped to the eventual taste of the coffee post-roasting and brewing. The platform then compiles organized data into a quality and traceability data cloud, gathering insights from Q Graders and offering a comprehensive solution for informed decision-making. Streamlined Grading Process AI-driven solutions can potentially help streamline the grading process by reducing time and resource inefficiencies associated with traditional methods such as sample transport and manual assessments. Through AI-automated grading systems, green coffee samples can be evaluated swiftly and accurately, minimizing human error and subjectivity. This streamlined approach can help to increase productivity and ensure consistent quality assessment across different batches and origins. Solutions such as ProfilePrint and Agrivero’s VeroLab use AI to perform molecular analysis and evaluate green coffee samples. ProfilePrint requires 50 grams of coffee beans; Agrivero’s VeroLab offers results within 4 minutes. These tools streamline the grading process, reducing time and resource inefficiencies. Enhanced Traceability & Accessibility Beyond their initial purpose, the above tools aim to enhance traceability as well. By digitizing data and creating comprehensive profiles for each coffee, these tools help provide a transparent and traceable record of coffee quality attributes. This facilitates better tracking of beans from farm to cup, ultimately enhancing overall traceability in the coffee supply chain. This transparency fosters trust and allows stakeholders to identify and address quality issues more effectively. AI integration in the coffee industry has the potential to enhance decision-making for traders and optimize production for producers. It could also streamline operations for warehouse facilities, and ensure quality for Q Graders and roasters. However, it’s worth noting that while AI technology shows promise, its current usage is predominantly among larger players in the industry. Although still in its early stages, AI technology is anticipated to become more mainstream, which would make it more affordable and accessible to smaller players in the coffee industry. This democratization of AI tools may foster a more inclusive and innovative landscape for the entire coffee industry. ABOUT THE AUTHOR Vasileia Fanarioti (she/her) is a senior online correspondent for Barista Magazine and a freelance copywriter and editor with a primary focus on the coffee niche. She has also been a volunteer copywriter for the I’M NOT A BARISTA NPO, providing content to help educate people about baristas and their work. You can follow her adventures at thewanderingbean.net.

<urn:uuid:c18dd361-b75e-4e3e-aa3a-a62f3495bc9c>

CC-MAIN-2024-10

https://www.baristamagazine.com/forecasting-the-future-impact-of-artificial-intelligence-in-coffee-part-two/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

SIMPLIFIED APPROACH FOR COMPUTATION OF SEQUENCE IMPEDANCES OF RADIAL PRIMARY DISTRIBUTION SYSTEMS Publication Date : 01/02/2009 The paper discusses analytical:procedures for computing sequence impedances of radial primary distribution systems. The analysis is based on two approaches. First is the Carson's approach while the second approach, developed by the author, is derived from the capacitive reactance and the inductive reactance of transmission lines and which, for the purpose of this paper, is called the InCap technique. The two techniques were applied to the Gaskiya/Town 11 distribution systems in Zaria town, Kaduna State of Nigeria. The results of the two approaches were comparatively analysed and were found to be consistent with those obtained when the techniques were applied to another distribution system. Conclusions were drawn based on the results and recommendations proposed. No. of Downloads :

<urn:uuid:b4122479-841f-4b7b-80d5-481eea4c180a>

CC-MAIN-2024-10

https://www.bayerojet.com/papers/volume-4/issue-1/simplified-approach-for-computation-of-sequence-impedances-of-radial-primary-distribution-systems/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Choose Your Smoker’s Fuel Type It’s not all just wood and charcoal with modern BBQ smokers. Part of this category’s rapid expansion has been the introduction of alternative fuel types, such as electricity, wood pellets, and even gas. Each fuel comes with its own benefits and considerations in terms of usability, so this is a natural place to start on your journey to buy a barbecue smoker. Electric BBQ Smokers These set-it-and-forget it models do the work for you with thermostats that control temperature in your cooking chamber, much like in an indoor oven. Lower-end electric smokers rely on rheostats, which merely adjust electrical flow to the heat-source coil instead of turning power on and off. Either way, the coil creates smoke by burning wood chips in a nearby smoker box. With no temperature to manage or fuel to reload mid-cook, all you have to worry about is maintaining the proper amount of smoke and airflow (plus a bit of extra wattage on your electric bill). Smoke and airflow are especially important in electric smokers — when you combine their large smoker boxes with a relatively low rate of airflow, it’s easy to oversmoke food. That being said, minimal airflow is a huge benefit for dishes like smoked chicken or turkey where moisture retention is necessary for juicy and tender results. Charcoal BBQ Smokers Charcoal smokers behave similarly to their wood-burning brethren, which are probably what most people call to mind when they think of smokers. The main benefit of this live-fire combustion is smoky flavor, though charcoal models can be difficult to use and have a steeper learning curve than other smoker types. We consider the trade-off of effort for flavor to be well worth it, especially if you have a smoker temperature controller to adjust airflow. You’ll still need to constantly monitor your fuel and smoke levels, but getting a feel for tending charcoal generally takes only a few cooks and isn’t as intimidating as it seems. You can also add wood directly on top of your lump charcoal in the fire box, be it chips for quick bursts of smoke or chunks for sustained smoke over time. This category also includes kamados, but we’ve created a completely separate article detailing how to buy kamado grills. Gas BBQ Smokers Just like electric models, gas BBQ smokers are incredibly easy to use. They’re also similarly constructed: usually vertically, with a gas burner in place of an electric coil at the bottom of the smoking chamber. Gas burners generate perfectly stable heat to light wood chips or chunks, an efficient ignition method that also makes it far easier to control temperature and smoke than what you’d experience with wood or charcoal smokers. When such guesswork is out of the way, your only concerns are time and your food’s internal temperature (so pick up a good remote thermometer). Don’t worry, these models don’t sacrifice much in the way of flavor — meat barbecued on a gas smoker still comes out tender and smoky with a perfect crust. If your gas smoker has air vents to control airflow, we highly recommend keeping them open while in use to prevent soot from building up inside the cooking chamber. Pellet BBQ Smokers We’ve already touched on easy-to-use smokers a few times, but pellet smokers are the simplest of all. They literally do everything for you, from managing fuel and heat levels to regulating smoke and airflow. Some, like Cookshack Fast Eddy’s pellet smoker, even have programmable cooking cycles that consistently deliver perfect BBQ with the push of a button. Because wood pellets create their own flavored smoke, you don’t even need to use wood chips or chunks! The resulting mild and subtle flavors make it very hard to oversmoke food, adding to the beginner-friendliness of pellet smokers. It’s helpful to remember that the hotter your fire, the less smoke is produced; conversely, the lower the temperature, the more the fire will smolder and smoke. You can use this to your advantage with pellet BBQ smokers by selecting “smoke mode,” which lowers the heat to create a rush of mild smoke. Choose Your BBQ Smoker Type As we hinted at up top, the modern barbecue smoke selection is extremely varied in more ways than one. Just as you have your choice of fuel type (it’s OK if you haven’t made it yet), there are a few body types for you to pick from. So, will it be the classic offset build, the space-saving construction of vertical models, or the eye-catching aesthetic of unconventional smokers? Keep reading to find which style suits you best. This term refers to a unit whose fire box (or heat source) is set off of the main chamber, usually horizontally. Generally, offset BBQ smokers have horizontal barrel-shaped bodies and use charcoal or wood to produce heat and smoke, which waft from the fire box into the cooking chamber. They’re the most popular models among barbecue purists and competitors despite the great deal of attention and effort required. Tending the fire becomes easier with the help of a temperature controller that handles heat and airflow, but you’re still responsible for monitoring fuel and smoke production. Though offset barrel smokers will have some temperature variance across the cooking surface because of the way heat moves, new features like large heat baffles and reverse-flow air intakes help heat stay even. These models place the heat source directly below the main, cabinet-shaped cooking chamber. From bottom to top, vertical smokers are configured as such: heat source, wood shelf or smoker box, optional water pan, and cooking grates. This design makes temperatures more even and easier to manage because heat and smoke naturally rise up toward your food. Most electric smokers are vertical, though many charcoal, pellet, and gas models also take this shape. Budget-friendly Gateway Drum Smokers, for instance, fit the vertical type. No matter the fuel, make sure your vertical BBQ smoker has easy access to the fire box to refuel when necessary (most have doors or sliding trays to easily top off). And we’d be remiss not to mention that vertical smokers can easily be built into a BBQ island. If offset smokers are usually horizontal and vertical smokers are just what their name implies, then this category of smokers is somewhere in the middle. Unconventional barbecue smokers don’t fit neatly into either distinction — instead, they mimic the construction of a standard grill or are so unique that they simply can’t be labeled like other smokers. Choose Your Smoker’s Configuration After determining your preferred fuel and smoker types, you’ll need to consider configuration. This is all about placement and mobility — do you want something you can move around the backyard (and bring to competitions, if you’re so inclined), or would you rather your smoker be built into your outdoor kitchen? Let’s dive into what you can expect from each configuration. Freestanding Barbecue Smokers Freestanding is the most common configuration by far. The mobility of these smokers is a big benefit in its own right, but this also makes them much easier to clean after a long day of smoking brisket — smoke creates soot, and meat makes mounds of fat drippings, so this convenience shouldn’t be overlooked. Some smokers require labor-intensive removal of ash and grease, which is much easier to do if you can move the cooker to clean it from all angles. As mentioned above, freestanding is also the configuration of choice for traveling competition smokers, plus these models are far easier to store for long periods of time. Just be sure yours has sturdy wheels for support, along with a smoker cover to protect your investment. Built-In Barbecue Smokers Who says you can’t build in a smoker? This is a great option for anyone looking to add versatility and an interesting aesthetic appeal to their outdoor kitchen. When you pair a BBQ smoker with a conventional gas grill, you’re able to offer a wider variety of food — and much more of it — to your guests. If you want to double down on versatility, a built-in kamado smoker sitting in a BBQ island cutout is the way to go. There are also vertical electric smokers on wheels, like those from Cookshack, that can slide directly into a counter cutout with proper ventilation. Even freestanding cabinet smokers have a place in island openings, as long as you allow for proper ventilation and clearance as recommended by your owner’s manual. Choose Your BBQ Smoker Class At this point, you should have a solid idea of what your ideal smoker looks like (sign us up for any and all, please). You’ve got one more decision to make, though, and it might be the biggest one of all — choosing which BBQ smoker class is right for you. We created these 4 classifications based on quality, performance, and features, which we deemed to be the best way to measure a smoker’s value and fit for a customer’s lifestyle. Read on to find out the key differences among Luxury, Premium, Practical, and Entry-Level smokers. Luxury Barbecue Smokers - Mostly built entirely from 304 stainless steel for extreme longevity - Lifetime warranties from trusted brands give you peace of mind - Sealed cooking chambers and thick insulation keep the smoke in your smoker - Versatile cooking systems and convenient features make for a luxury experience Premium Barbecue Smokers - Strongly built from stainless steel or powder-coated steel for years of use - Solid warranties protect your investment for up to 10 years - Dependable cooking systems and quality insulation provide consistently tasty BB! - Home to electric smokers with digital control centers that make smoking simple Practical Barbecue Smokers - Budget-friendly, easy-to-use vertical smokers in every fuel type - Moderate warranties reflect the quality of mixed materials used in construction - Fairly thick steel retains heat decently, and most have simple analog controls - Unique cooking systems and helpful features distinguish these smokers from Entry-level models Entry-Level Barbecue Smokers - Generally designed to meet a certain, low price point rather than a level of performance - Weber Smokey Mountain stands above all other smokers in this class - Thin materials of lower quality will break down sooner, as reflected by limited warranties - Simple smokers that lack features to make cooking easier or more versatile Final Considerations When Buying a Smoker Before you go, we’ve got a few final wispy words of wisdom to keep you moving down the path toward your dream smoker. BBQ smoking is a science (just ask any competitor), so there are plenty of considerations that factor into the tender and juicy results everyone craves. We’ll cover the most pressing topics below so you can have a head start when you finally unbox your shiny new smoker. Look for a smoker with great insulation. Heat and smoke retention are among the most important parts of low-and-slow smoking, which makes great insulation a must. Well-designed fiberglass mesh or felt gaskets, along with flanged lips, are among the features that contribute to insulation, especially when smoking in cold climates. Thick-gauge metal also helps because it’s better equipped to absorb and reradiate heat back toward your food, while the ceramics used in kamado smokers are the best insulators around. It’s a good idea to pay attention to any seals or gaskets in the smoker body where smoke can escape — not only will your food miss out on all that flavor, but a leaky smoker also uses more fuel than one with tighter seals. In short, you should set your sights on a barbecue smoker constructed from quality materials and that comes with a good warranty from a customer service-oriented company. Airflow & Temperature If you can’t easily regulate temperature, then achieving great barbecue is virtually impossible. This is especially true for smokers, so you must take steps to understand the temperature-control systems of the model you ultimately choose. Charcoal and kamado smokers rely solely on dampers (or vents) to adjust airflow through the cooking chamber, which in turn influences the fire and internal temperature. Even electric and gas smokers may have a damper system to more accurately dial in temperature. So, what does this mean for you? Make sure the dampers are easily accessible, easy to operate, and made from durable materials that won’t rust (a rusted damper will be stuck in place, as will your airflow and temperature). Wood Chips & Chunks In many models, wood will be your main source of smoke. Using different species of hardwood produces varied flavors in your food, so don’t hesitate to experiment with multiple types. We’ve received many questions about wood chips and wood chunks, and we’re aware that there’s a good bit of misinformation out there about how they should be used. Here’s our stance: - Use wood chips for heavy smoke flavor during a relatively short cook - Use wood chunks for a steady stream of smoke flavor over a longer cook - It’s possible to use a mixture of both as needed, depending on what you’re smoking There’s also the question of soaking wood chips, which warrants a more detailed explanation. Though many people swear by this practice, all you accomplish by soaking wood is increasing the amount of time it takes for your chips or chunks to ignite. The only time it makes sense to soak wood is when you need to extend the length of your smoke session, in which case you’d soak just half your stock. This allows the wet pieces to ignite as the dry bits start to burn out, essentially refueling your smoker without the hassle. Water Pans & Water Smokers We call them “water pans,” but they can actually hold other liquids like apple juice, cider vinegar, or beer that impart distinct flavors into your food. The choice is yours, but you really only need water to fulfill the function of a water pan. That function is twofold: creating high levels of humidity inside your smoker, and aiding in temperature stabilization. Humidity is important because it keeps your food moist even in the hot, dry air typically generated by smokers. Temperature stabilization, though? That’s a result of your water pan acting as a huge deflector that absorbs and radiates heat upward to even everything out. You technically don’t have to use a water pan to properly operate a smoker, but it’ll make the process a whole lot easier. Still have burning questions about barbecue smokers? Our knowledgeable experts are standing by at 1-844-243-3376 to fill in the gaps, and our BBQ Smoker FAQ also has tons of additional information that could be of use to you. We won’t keep you any longer — there are briskets to smoke!

<urn:uuid:9cb9d424-b580-4dc5-9726-a824c473d494>

CC-MAIN-2024-10

https://www.bbqguys.com/a/37945/learn/bbq/buying-guides/bbq-smokers

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Ever been in a situation where your child is struggling and you’re struggling with your child? Of course you have, we all have. In the moment, it can be tricky to remember that your child’s behaviour is their form of expressing what they are feeling. It can also be difficult – and often impossible in the moment – to realise that your response to your child’s behaviour is a reflection of what you may be feeling. It’s for these moments, and a whole host of other parenting moments, that we worked with Beacon Services Resources CIC to create the world’s first play therapy based App, lumin&us. lumin&us was created by social workers, play therapists and educators with generous grant funding to support family life. Based on Stephen Porges’ Polygaval Theory and play therapy, this App can improve wellbeing and relationships by helping adults and children understand and identify the connection between thoughts, feelings and behaviours and ‘prescribing’ the right type of play at the right time. Using the App’s SCAN button helps parents and carers to work out which state – safe, struggling or drowning – their children are in based on their feelings, behaviours and physical response to a situation. There is also a SCAN for adults with helpful tips and tools to support, soothe and calm parents and carers experiencing stress. Matt Parsonage, Head of Communities at Clarion Futures, said: “Having been shortlisted for The William Sutton Prize, our awards programme that recognises innovative projects tackling key societal issues, Beacon Family Services have really gone from strength to strength. We’re delighted to have provided funding through our social value programme to support the development of this app which we hope will make a huge difference to those who use it, helping to improve children’s wellbeing though play.” Enjoying our resources? Want to help us support other families? lumin&us is currently free on both the App Store and Google Play. If you have enjoyed using the App, Cards to Help You Connect, or would like to support Beacon Services Resources to continue to help struggling families free of charge, you can donate here. Like Beacon Family Services, Beacon Services Resources resources is a CIC (Community Interest Company) which means that any and all profit goes back in to helping families. Beacon Services Resources CIC would like to thank Clarion Futures, Aston Business School Innovation Vouchers, Innovate UK Edge and the West Midlands Combined Authority for making this App possible. Lumin&us is the Registered Trademark of Beacon Services.

<urn:uuid:8ad451bf-2a6f-4ac2-b428-abc0dd0c401c>

CC-MAIN-2024-10

https://www.beaconservices.org.uk/luminus-a-new-play-based-app-for-families/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Rafa the Dinosaur: The Incredible Journey of a Boy Who Became a Prehistoric Creature One day, Rafa woke up and he had turned into a dinosaur! He couldn't believe it. He tried to speak but all that came out was a loud roar. He looked around his bedroom and saw that everything else was the same. Rafa was scared and confused about what had happened to him so he decided to go outside and try to find some help. On the way out of his house, he tried to explain to his family and friends what had happened, but they all just stared at him in disbelief. When Rafa arrived at school, his classmates were equally astonished when they saw that their friend Rafa had turned into a dinosaur! They all ran away in panic while Rafa tried desperately to explain that he was still Rafa inside the dinosaur body. After much persuading, the teacher believed him and allowed him to stay in class. However, this caused a great disturbance among the other students who were still convinced that he was a dangerous beast! Despite all of this, Rafa kept trying to convince them that he was still himself inside the big reptilian body by speaking politely instead of roaring, or helping with the class activities like cleaning up after everyone else or pushing their desks back into place instead of destroying them like actual dinosaurs would have done! Little by little, his classmates started to believe him and slowly but surely even his teacher accepted it as well! By the end of the day not only did everyone know that it was indeed still Rafa inside there but they also knew how amazing dinosaurs can be without ever having seen one before! Later on at home, when his family finally believed him as well they all went outside together for a nice evening walk around their neighbourhood where kids and adults alike admired Rafa's transformation with awe and astonishment! Everyone thought it was really cool how such an ordinary boy could turn into an extraordinary dinosaur just like in fairy tales! And so every day when school finished they'd all meet up again for another evening stroll through town so that everyone could show off their friendly dinosaur friend who waved hello with its tiny hands as they passed by each house on their way home. From then on, not only did everyone around town know about Rafael's transformation but it also became something quite special among everyone else who had heard about this story from neighbours or distant relatives too! Soon enough people from far away started visiting just to get a glimpse of this special creature even if it didn't last forever since things eventually went back to normal... or so everyone thought until one day.... Little did everyone know though that this wasn't over yet because when Rafael woke up once again, something amazing happened: he hadn't changed back into being an ordinary person; he stayed a dinosaur after all!! Everyone rejoiced with great happiness upon learning this astonishing news which spread across town faster than wildfire yet again - although nobody knew what made Rafael turn into a dinosaur in the first place or why he kept staying one...

<urn:uuid:1e519829-d528-40c9-ac85-38a9c77324df>

CC-MAIN-2024-10

https://www.bedtimestory.ai/omarkayat1/story/iJRky6f

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

So we're all in agreement – getting a job in today's society is tough, no matter how old you are. You can hand out CV after CV and not get so much as a phone call saying ‘no'. Was it because you weren't right for the job? Or perhaps because your CV was just a laughing stock, here are a few examples of some of the funniest errors made on a resume to make you feel a lot better about yours and simple rules to follow so you don't make the same mistake. Rule 1: Check, check and check again! Make sure if you get someone to proofread, you get rid of their notes! One woman sent her resume and cover letter without deleting someone else's editing, including such comments as “I don't think you want to say this about yourself here.” This is why you should always read through your CV time and time again, or you may find yourself writing that your best skill is your attention to detail…twice! Rule 2: Leave the art attack at home! So you were a bit of a whizz at art when you were a kid? That's not an invitation to draw on your CV, leave the stick men and animals drawings off – unless you're trying to a get a job as an artist, but that's what a portfolio is for. One candidate for a job drew a car on the envelope of her CV and said it was the hiring manager's gift. As nice as this idea was, I don't think it was quite enough to get them hired. Rule 3: Don't take the questions on applications too literally! You may need to include standard information such as name, date of birth or contact information. Two candidates believed that these simple questions should be taken very literally and of course, gave us and the hiring manager quite a lot to laugh about. On the line asking what ‘sex' the person was, one man (who was clearly a very open individual) wrote “occasionally.” On another application, a person was asked how large his old department was in his last company; their answer was “3 storeys.” Rule 4: Avoid the painfully obvious! If an application wants to know more about you as individual or your contact information, try to avoid writing that your emergency contact phone number is 999! And if you are English, born and bred – speaking fluent English may not be that much of an accomplishment but it's better than writing: “Fluent in English. Also I have been heard muttering Gibberish in my sleep.” As one woman seemed to think was worthwhile noting. Rule 5: Grammar Check! No one's asking you to check through every single word but correct grammar and punctuation can save a lot of funny misunderstandings. For example, writing: “Let's eat, Grandma” we see this as a harmful dinner with all the family, on the other hand, if someone was to say “Let's eat Grandma,” this would be the time to run away as the punctuation implies that these people are cannibals! Value the use of grammar, correct spelling and punctuation in your CV or you may end up making the same mistake as these people: - “Worked in a consulting office where I carried out my own accountant” - “Spent several years in the United Sates Navel Reserve” - “Am a perfectionist and rarely if if ever forget details” If you seriously want to get hired, make sure you don't imitate any of these application disasters and follow these very simple rules carefully. They could be the difference between a job offer and people mocking your intellect on a website for their own entertainment!

<urn:uuid:f7e73935-4681-47b0-8be3-81da188def6f>

CC-MAIN-2024-10

https://www.beetroot.com/graduate-jobs/careers-advice/application-and-cv-bloopers/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

How to Make Your Home More Dementia-Friendly The layout of a home can make all the difference for a person living with dementia. In addition, the symptoms a person can experience during their dementia journey, such as memory loss, confusion, and problem-solving, can create obstacles and challenges, even if they are still living in the house they’ve resided in for years. Making adjustments and changes to a home can increase safety and provide comfort, creating the opportunity for longer independence in your loved one’s life. At Bella Groves, we know that dementia can alter a person’s ability to navigate their surroundings, even their own home. So how do you make your home more dementia-friendly? While you cannot change the entire layout of a house overnight, there are simple – yet beneficial – adjustments you can make. Improve or Increase Lighting In general, older adults can benefit from brighter, more clear lighting in their homes. Not only can this alleviate any vision problems that occur naturally with age, but it can reduce the risk of falls and accidents. For those living with dementia, effective lighting can help them see where they want to go and identify spaces, rooms, and signs. It also helps them see other people’s faces and body language more clearly, making easier to enjoy tasks and recreational activities. Implement as much natural lighting as possible throughout the day. For example, keep curtains are open, ensure windows are not blocked by blinds or unnecessary accessories, and all hedges and trees near windows are maintained to avoid blocking sunlight. In addition, natural light can help a person living with dementia’s sleep habits. “Researchers found that exposure to the bright daytime light significantly improved sleep quality … [and participants] showed fewer symptoms of depression and agitation (alzinfo.org).” When it comes to artificial lighting, ensure there’s plenty of light near any staircases or steps and in bathrooms and bedrooms. Light switches should be easy to reach and use, but if your loved one struggles with accessing light switches or pulls, automatic light sensors can easily combat this. Reduce Unnecessary Noise While hearing loss is a natural part of aging, people living with dementia experience hearing changes differently. Rather than a decline in volume, they find it challenging to process certain sounds to accurately know what they’re hearing. This isn’t just a cause for confusion, but a cause for fear, as it can be unnerving to hear sounds you don’t fully comprehend. Carpets, cushions, and curtains absorb lots of background noise in the home, and if you have laminate flooring, even walking across the room can create excessive noise. Ensuring that most flooring surfaces are covered with carpets or rugs is an easy way to reduce background noises. Be sure to keep televisions, radios, or other electronic devices that create noise turned off when not in use, and when they are turned on, make sure the volume is at a comfortable level. In addition, be sure to communicate and provide reassurance about tasks or activities that may create noise, such as running the washing machine or someone mowing the lawn. Use Contrast Colors The human perception of color depends on the pigment of objects and light. When a person is living with dementia, they experience a reduction in: - Contrast perception or the ability to distinguish subtle changes in environments - The vividness of colors, as colors begin to appear more muted - Ability to tell the difference between blue, green, and purple colors Using color contrasts makes things stand out for a person living with dementia, creating more obvious signs in their perception that create more clarity when navigating and understanding their environment. For example, using a red placemat under a white plate can avoid confusion while eating meals. In addition, floors, rugs, and walls should contrast clearly so that the walls and floors can be easily identified. These are just some small ways you can make a home more dementia-friendly. Bella Groves is dedicated to providing dementia education that helps care partners and family members provide better care and create more moments of unconditional joy. If you are concerned about the safety of your parent or family member due to their living environment, a memory care community can offer a safe, secure, and purposefully designed setting for them to thrive. Our Bulverde memory care facility is a place you have to feel to believe, so we invite you to stop by and take a tour. You’ll know the difference right away.

<urn:uuid:b31b9bba-3b10-481b-8769-511284e12ef3>

CC-MAIN-2024-10

https://www.bellagroves.com/how-to-make-your-home-more-dementia-friendly/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Piazza Monte Ceneri Piazza Ticino, on the Monte Ceneri Pass, with its Totem in Ticino stone, is the new landmark of the territory. The symbolic value of this intervention is very strong: the square symbolically represents the union between 3 regions (Locarno, Bellinzona, Lugano) characterized by a historical past of deep divisions since the year of establishment of Canton Ticino (1803). The Totem element, on the other hand, represents the concretization of the entire AlpTransit project, which sees the construction of the Ceneri base tunnel as its completion. The cladding of the Totem is in Ticino stone from the AlpTransit excavations. The new Piazza Ticino represents one of the main points of the "La Via del Ceneri" hiking trail. The elliptical space is characterized by the presence of 5 benches and 4 new trees that create a shaded area for hikers to rest. There is also a Photospot of the Grand Tour of Switzerland on the square where you can take your souvenir photo. Address: Via Monte Ceneri, 6802 Rivera Parking: Parking at the gas stations on the pass Walking distance: Pedestrian path from the petrol station, 1 minute

<urn:uuid:4408b1f8-6a12-48ba-8e16-21527d5322db>

CC-MAIN-2024-10

https://www.bellinzonaevalli.ch/en/commons/details/Piazza-Monte-Ceneri/90372.html

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Accounting is an essential component of nearly all businesses and organizations, and becoming a CPA is a good choice for those who are good with numbers and pay close attention to detail. Accounting degrees are offered at all levels from associate to doctorate. An associate degree in accounting prepares individuals for entry-level positions, like bookkeepers or accounting clerks. This degree involves coursework covering the basic principles of accounting and statistics and takes about two years to complete. Courses may include cost accounting, business management, and payroll management. In general, there are no prerequisites for an associate degree in accounting. A bachelor’s degree in accounting takes typically takes four years to complete and provides more in-depth instruction of the field. Students commonly complete courses in statistics, economics, tax planning, business law, accounting theory, and fraud analysis. Students are usually required to complete general education courses prior to admittance to bachelor’s degree programs in accounting. A master’s degree in accounting is an advanced degree that prepares students to work in upper level positions and the programs mainly focus on the fundamental concepts of accounting and effective accounting methods. This degree commonly takes at least one to two years of intensive study and the coursework may include financial accounting, corporate financial reporting, auditing and assurance, business taxation, and financial decision making. An undergraduate degree is needed to gain acceptance into a master’s degree in accounting program and if a student does not have a degree in accounting he or she may need to complete prerequisite courses in basic accounting, statistics, and pre-calculus. A doctorate degree in accounting is an advanced degree that focuses on specialized topics and research in accounting. It requires a master’s degree and at least three to five years accounting experience. The coursework includes doctoral seminars, advanced accounting courses, and quantitative study and statistics. It also requires a dissertation. Doctoral programs typically take four to five years to complete. Steps to Becoming a CPA While there are a variety of accounting degree programs out there, good options are offered by schools that are accredited and have a good ranking from authoritative organizations, such as the U.S. News and World Report. The University of Texas Austin and Southern New Hampshire University are examples of top schools that offer accounting degree programs. The University of Texas offers accounting degree programs at the bachelor’s, master’s, and doctoral levels and the curricula are innovative and feature unique learning experiences. This school is ranked number one by the U.S. News and World Report. Southern New Hampshire University offers a high rated bachelor’s degree in accounting entirely online. The program focuses on equipping students with the necessary in-depth accounting abilities to succeed. In addition to completing an accounting degree, individuals must take an examination to become licensed as a CPA. After Becoming a CPA: Career Options The job outlook for the accounting field is good, with an average growth rate. After passing the examination and becoming a licensed CPA, there are a variety of career opportunities including public accountant, government accountant, forensic accountant, and non-profit accountant. Public accountants work for companies that provide services to an array of clients. These CPAs commonly earn between $47,000 and $75,000 per year. Government accountants work at the local, state, and federal levels and often earn an average of $35,000 to $62,000. Forensic accountants concentrate on providing the necessary information to investigate financial crimes. They commonly act as witnesses in legal proceedings. Forensic accountants earn between $40,000 and $80,000. CPAs who work for non-profit organizations assist in maintaining strict financial budgets. They help with a variety of tasks including fund raising and balancing expenditures. Non-profit accountants earn between $32,000 and $48,000. As you can see, becoming a CPA can lead to a rewarding and lucrative career.

<urn:uuid:d372bfc2-e3bb-4db1-81ac-4587e8ba3910>

CC-MAIN-2024-10

https://www.bestaccountingdegrees.net/becoming-a-cpa/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

They are man-made versions of the hormone cortisol which is created by the human body in the adrenal glands (two small glands at the top of the kidneys). Taking corticosteroids causes the body to slow down production of, or stop making, cortisol. The body then receives the cortisol it needs from the corticosteroids. Corticosteroids are synthetic versions of the naturally occurring hormone cortisol, which is produced in the body by the adrenal glands. - The appropriate individual dose must be determined by trial and error and must be re-evaluated regularly according to activity of the disease. - You may also have heard of anabolic steroids, which are sometimes used without medical advice to increase muscle mass. - The renal clearance of salicylates is increased by corticosteroids and steroid withdrawal may result in salicylate intoxication. - Establishment of secondary fungal and viral infections of the eye may also be enhanced in patients receiving glucocorticoids. Effects on your mood can happen quite suddenly and improve once you stop taking steroids. Nonetheless, it can be unsettling to experience changes in mood. Let your medical team know how you are feeling so that they can help to manage these side effects of steroids. If your side effects are severe, they might lower your dose of steroids. Would you like free, easy to implement health tips? Reactions are common and may occur in both adults and children. In adults, the frequency of severe reactions has been estimated to be 5-6%. Psychological effects have been reported on withdrawal of corticosteroids; the frequency is unknown. - Please encourage all women to complete an online reporting form. - This recommendation refers to direct levels administered to the child and not to the level being taken by a breastfeeding mother. - You could also contact our specialist Helpline nurses for more information and support. - Do I need to keep having an osteoporosis drug treatment if I’m no longer on steroids? Prednisolone is extensively bound to plasma proteins and passes into breastmilk in small quantities. High-dose steroids (more than 40 mg) are rarely necessary long term and so can be used in breastfeeding. It’s important to seek medical advice before stopping or making any changes to your medication. If you do need a steroid card, make sure you always carry it with you. If you lose it, you can get a replacement from your pharmacy or GP. Find out more about multigametables your preventer inhaler and possible side effects here. Talk to a doctor if you (or someone taking this medicine), show any signs of mental problems. Patients/carers should be encouraged to seek medical advice if worrying psychological symptoms develop, especially if depressed mood or suicidal ideation is suspected. Chickenpox is of particular concern since this normally minor illness may be fatal in immunosuppressed patients. If a diagnosis of chickenpox is confirmed, the illness warrants specialist care and urgent treatment. If you are only taking steroids for a short period of time, you may not need treatment. This is because your blood sugar levels should go back to a healthy range once you have finished your course of steroids. Many people will find that their blood sugar levels return to a healthy range when they stop taking steroids. But for others, steroid-induced diabetes can continue even after you’ve stopped your treatment. Your doctor might ask you to check your blood sugar levels while on steroids. If you notice any of these symptoms, it’s important to let your GP know. It is unlikely that your child will have side-effects if they only take prednisolone for a few days. You shouldn’t drink any more than the UK guidelines of 14 units a week. You shouldn’t save these units up to drink all in one go, so try to spread your units across the week and have some alcohol-free days. Steroids taken for a long time can also cause your muscles to become weaker, and they might occasionally affect periods in women.

<urn:uuid:fca2c3bb-c701-4292-85a5-b4671e23df41>

CC-MAIN-2024-10

https://www.bharatherbalpharmacy.com/steroidinduced-diabetes/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Charles E. Barber, the sixth Chief Engraver of the United States Mint, set out to design a set of coinage consisting of a new dime, quarter and half dollar. While the coins would ultimately carry his name (“Barber coins”) he decided to invite artists to submit designs for the new pieces. Artists were asked to submit models in low relief for judging. Barber’s guidelines were more stringent than those of previous competitions. He required that each submission feature the lettering to be included on each piece so that he and others could get a sense of the final look of the complete piece. While the competition was open to the public, Andrew Mason, the superintendent of the New York Assay Office, specifically called on ten artists to submit entries. The list included renowned sculptures and painters like Daniel Chester French, remembered for his 1920 statue of President Lincoln, and Kenyon Cox, known for his multi-disciplinary talents ranging from sketch work to poetry. The winner would receive a $500 cash prize. However, soon after initiating the competition problems surfaced. The artists invited to compete responded with a list of amendments to the guidelines. They asked that each artist be paid for their submitted work. They also asked that the work be judged by their peers and that each coin would be designed by a single artist to ensure a consistent style within each piece. Finally, the artists requested more time to complete their work. Officials declined these terms. They cited limited funds explaining that they only had enough money to pay one winner. In the meantime, the judges began receiving entries from the general public. After reviewing each they determined that none were suitable. Officials were disappointed by what they perceived as a lack of artistic talent displayed by the various attempts. Soon after, Barber took it upon himself to complete the design work. Barber turned to French coinage for inspiration. Following these initial designs, Barber and Mint Director Edward O. Leech had several long communications with each other as they contentiously debated the best look for the coins. The final design of each denomination shows the head of Liberty with a crown of olive branches. The reverse side of the quarter shows a heraldic eagle with a scroll inscribed with “E Pluribus Unum.” Gripped in the right claw is an olive branch and in the left is a bundle of thirteen arrows. Upon minting, the designs received mixed reviews. In time, changes were necessary, but not as a response to those who were critical of the design. Instead, the design adjustments were for a more practical reason; people complained that the coins would not stack properly. As a result of the alteration, there is a “Type I” coin and a “Type II” version of the 1892 quarter. In 1900, Barber made additional changes to the quarter resulting in a thinner piece allowing for 21 coins to stack in the space of 20 of the previous version. Barber’s design was used from 1892 to 1916 with the 1901-S quarter remaining a considerable rarity, along with the 1896-S and the 1913-S. Want to read more? Subscribe to the Blanchard Newsletter and get our tales from the vault, our favorite stories from around the world and the latest tangible assets news delivered to your inbox weekly.

<urn:uuid:89280698-6b78-4844-a3d2-3ebff2ee428c>

CC-MAIN-2024-10

https://www.blanchardgold.com/market-news/the-uncertain-path-to-the-barber-quarter/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Since Bolivia is a multiethnic country, it has many own languages. In Bolivia 37 different languages are spoken. The Bolivian gastronomy is simply delicious and known by it´s large variety. It is based on typical dishes from each area such as corn, tunta, yucca or mandioca, banana, quinoa, etc. Each region of the country has a different cooking style. In the altiplano, plates with tunta, chuño, potato and cor are traditional. In the oriental region the use of yucca, corn and banana is traditional for cooking. The most outstanding is the Cochabamba cuisine, known for abundant servings and delicious recipes based on meat and hot sauce making it one of the favourites in the country. Enjoying the bolivian cuisine means enjoying a variety of unique and traditional dishes as salteñas, anticucho, chairo, fricase, silpancho, sonso, llauchas (cheese pastry), marraqueta (a type of bread), trout, api with rolls, k’alapurka (soup with a hot volcanic rock), chicharron, pique macho and hundreds of exquisite traditional dishes. The bolivian beverages are also unique and exceptional. The traditional beverages are: coca tea, api, mocochinchi, chicha morada, chicha and the delicious wines and singanis from Tarija. Some countries do not require a visa to enter Bolivia. These countries are: Andorra, Argentina, Australia, Austria, Belgium, Brasil, Canada, Chile, Colombia, Costa Rica, Croatia, Czech Republic, Denmark, Ecuador, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Israel, Italy, Japan, Latvia, Liechtenstein, Lituania, Luxemburgo, Mexico, Monaco, New Zeland, Netherlands, Panama, Paraguay, Peru, Philippines, Portugal, Eslovaquia, Eslovenia, Espain, Switzerland, Sweden, Turkey, United Kingdom, Uruguay y Venezuela. Usually tourists whom require the visa can get it once they arrive to the country. The oficial currency in Bolivia is the boliviano (BOB). American dollars are also accepted in all capital cities. INTERNET AND ELECTRICITY Electrical voltage in Bolivia is 220v. All capital cities and main towns have electricity 24 hours a day. There are some areas where electricity is limited. The capital cities have access to internet as well as touristic attractions. Most of the hotels have the service as well as cafes and restaurants that have wireless conection. Internet can be accessed through different internet centers which charge by the hour. An hour of service costs less than one American dollar. Since some regions of the country are localized at a considerable high altidude, high altitude sickness is frequent. It is recommended for precausions to be taken. During the first days, food that causes slow digestion (and or big servings) should be avoided as well as physical activities that require much effort. High altitude sickness pills can be purchased at pharmacies and coca tea provides relief as well. If you plan to visit the tropical areas of Bolivia, you will require the yellow fever and malaria vaccinations. HOW TO GET TO BOLIVIA There are two important airports in Bolivia, the International Airport of El Alto (in La Paz) and the International Airport of Viru Viru (in Santa Cruz). Many airlines arrive from the USA and Europe daily at both terminals. Departures from USA to Bolivia take place from Miami and departures from Europe take place from the main capital cities (London, Rome, Amsterdam, Berlin and Madrid) Flights within South America to Bolivia are more frequent and available with many airlines. There are various alternatives to travel to Bolivia by bus from the bordering countries Argentina, Chile, Brazil and Peru. Usually the most frequent destinations of the buses are La Paz and Santa cruz since they are the most important touristic centers in Bolivia (especially La Paz). Going to other destinations in Bolivia from La Paz or Santa Cruz is pretty easy either by plane or by bus. Tourists from neighbor countries arrive to Bolivia in 4x4 vehicles, mainly from Chile and Peru. In order to to this, the documentation of the vehicle and a valid drivers licence is required.

<urn:uuid:bf65ac68-73e2-4795-a6f9-017a8e3d3521>

CC-MAIN-2024-10

https://www.boliviamall.com/en/bolivia-tourism-information.html

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Stop thinking about who you might offend and start thinking about who you might inspire. Fans are always asking Tomi Lahren where she gained the confidence and candor that have made her who she is: a celebrated free-speech advocate, a conservative media star, and one of the most controversial pundits in America. In Never Play Dead, Tomi cheers on anyone, especially other young women willing to speak their minds. She takes readers on a tour of the internet trolls, political correctness police, campus activists, and condescending elites who never pass up a chance to quash honest debate. And she skewers the self-esteem movement that ironically discourages people from speaking up for themselves. She tells the story of how she worked her way out of South Dakota to television fame in LA, surviving social isolation, a truly terrible boyfriend, and awful workplaces. Along the way, she was tempted to follow everyone’s advice to keep quiet and bide her time, but she never did. This comes at a cost. Any time Tomi posts a video or sends out a tweet, it makes headlines. A video of a stranger throwing a glass of ice water at her and her parents went viral, and the president tweeted about it. She was fired at The Blaze because she wouldn’t toe the party line. However, it’s fine to lose followers as long as you never lose yourself. Whether you’ve been told you’re not good enough by parents, lovers, frenemies, bad bosses, or social media, it’s time to take Lahren’s advice and fight back. Free speech isn’t just saying what you want; it’s hearing what you don’t want to hear. Never Play Dead teaches you to shed your fear, find your inner strength, speak the truth, and never let the haters get you down.

<urn:uuid:4f908d13-39d6-43c1-9671-6c5622ffcc61>

CC-MAIN-2024-10

https://www.bookpeople.com/book/9780062881946

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

For many dogs, people are exciting. When a new person comes to your door, your dog stands a good chance of getting his butt rubbed, being pet, or at least some attention, right? For many dogs, they get so worked up and excited that they have to be put outside when strangers come over, because they are simply too out of control. But let's look at why this is? New people coming over is a lot like Christmas is to young children. It's an opportunity to get something it really wants. Cute Puppies Can Easily Get The Wrong Kind Of Attention And let's face it, what person coming over to your home could resist your cute little Labradoodle puppy? Your Puppies "Cute Factor" Works Against Him Because strangers are always coming over and doting on how cute a puppy is, it conditions most dogs to get excited to see new people. If left unchecked, the excitement that builds up inside your dog becomes so strong that he can't control it. Think Kids who get so excited for Christmas presents they start misbehaving. In order to fix this behavior, you need to break this habit of strangers doting on your pup. Remember the Nothing in Life is Free Principle? It applies here as well. What I recommend to my clients is that the first skill they should train their dog is not sit, stay or come... but to go lay on his mat. And I recommend that this behavior is the behavior that require their young puppy to do when people come over. If you'll cue your dog to go lay on his mat and stay there when new people come over, it allows him to practice self control away from the people who come to your home, instead of getting worked up and doted on at your feet. I recommend you train your dog to continue to lay on his mat, until your guests are situated before allowing your dog off his mat to mingle with guests. If you can, try to help your guests ask your pup to sit before doting on them. They might think you're a bit of an strict dog owner, but as your dog ages, you'll have people telling you how lucky you are to have a dog with such self control when he automatically sits in front of guests calmly... and only you and I will know LUCK had nothing to do with it ;-)

<urn:uuid:6c60d481-49b7-479a-9abc-58dec13056bc>

CC-MAIN-2024-10

https://www.brightstarlabradoodles.com/post/tips-for-training-a-hyper-puppy-to-greet-strangers

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Here is a view of the Food District in downtown Buffalo as it appeared in the early 1960s. Beyond the I-190, you can see the Booth Fisheries building, the Fairmont Foods building, the Elk Street Food Terminal, and the National Terminal and Refrigerating Company. This was where a majority of food and produce entered Buffalo either by way of freight train or truck. Today, the Booth Fisheries Building can be recognized by the Coffee Rich signs painted into the brick. The building is abandoned and is in a terrible state of disrepair (What else is new in Buffalo?) Fairmont Foods still exists. Look closely and you will see the bridge carrying Michigan Avenue over Exchange Street peak its way through the mass of buildings. Immediately to the left of Michigan Avenue is the old Erie Railroad depot as it was being used by a trucking and freight company. You can still see many freight cars on the Erie's tracks parked alongside Exchange Street. The building in the right foreground is the old Federal Building/Post Office - now used by ECC City Campus. What's really incredible is that all along the top of this photograph, which is the area into the First Ward, all you see are trees! In fact, Downtown Buffalo was loaded with trees at one time. Imagine that! This picture was one of several in a series of aerials taken from the Liberty Bank building. Today, this view is almost devoid of buildings but construction has begun on Exchange Street to reuse the land that was once occupied by either the railroads or other buildings that have long since been torn down. Seems to me that if they just left things alone in the first place.....

<urn:uuid:5612bcd5-5eaa-48ff-8c29-9ab9d8c30e15>

CC-MAIN-2024-10

https://www.buffalohistoryworks.com/photograph/others/pic47.htm

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

A trend emerging in recent years in metal design is the adoption and application of garage cladding systems and screening. As architects adopt the process into their designs, it has become clear that the adherence to the concept of cohesion is important to both the entire building campus visibility and thematic intent. This trend has brought about several new types of garage screens and cladding systems that help not only the aesthetic value of the project, but also provide benefits to the structure and its use. There are multiple types of these systems, each chosen over the other based on the visual tie into the rest of the building or campus, giving little to no ulterior benefits. While these systems can be added to existing garages, it is more common to see them included in the budget during the initial design process as part of the overall plan concept. This trend is in an effort to do away with the outdated old-fashioned look of traditional parking garages that appear as a contrast to the well-designed and intentional look of the buildings they feed. These types of systems include: - Aluminum Perforated Plate Panel Systems—used to deflect partial light, rain and wind, as well as offer a pattern in a visually distinct, yet reminiscent style to the artistic stippling of pointillism. - Aluminum Eggcrate Grille Systems—a system offering strong vertical and horizontal sightlines, creating a uniform crosshatch designed to be a fitting namesake to the referent. - Aluminum Expanded Mesh Systems—screening that tends to have a diamond-inspired pattern from the triangulation of the cuts made to a single sheet of metal. - Aluminum Extruded Cassette Screens—screening that has a vertical linear look to it from the extension of the screening system. - High Tension Mesh Screens—screening that has a semi-transparent screen look to it, allowing for more light to pass through. - Aluminum Corrugated-Perforated Plate Systems—the utilization of corrugated metals in this screen system give a look that is more wavy than other types of screen systems. Uses, Benefits and Functions With an increase in architects and designers adopting the process of garage screening, it needed to be streamlined for efficiency, ease of installation and cost of labor. By utilizing the system of manufacturing in the workshop and installing at the location, it has become clear that there is a ‘sweet spot’ in the size of the panels that allows for the most space to be covered with the least amount of work. With the screening panels, if they are made too small, it requires more individual pieces and takes more time and effort on the part of the field labor. However, if the pieces are too large, they require more machinery to move, adjust and manufacture in the shop, as well as more heavy machinery at the location to install, which raises the cost and complexity of the project. This has led to the intersection between ease and cost efficiency to be in the range of a 5-foot-by-10 to 15-foot sections. This size allows the shop to fabricate them relatively easily, transport them to the location and have them installed with minimal extraneous heavy machinery. This level of productivity helps to increase quality control, having more influence over the process and involving fewer moving parts. In addition, these systems are highly customizable as clients can choose the type of perforation of the metal sheets, and in doing so, determine the amount of sunlight that will come into the structure. The customization of these systems can be anything from the hole size and shape, to the materials, finishes and shapes of the panels themselves, giving geometric control over the visual identity of the panels and walls. These systems also provide enhanced security and privacy to the building, helping to eliminate the gaps in the structure and hiding the contents from the outside. The reduction of the lighting to the building also cuts down on heat and glare from the sun while still providing ambient lighting that cuts back on energy usage. The reduction of exhaust pollution to the nearby environment helps to fulfill the needs and requirements of building developers and city municipalities during the design process to get the garages and projects approved. The protection provided helps by adding a level of security due to the lack of visibility from the outside world. This helps to protect high-end cars from vandalism and theft, as well as giving shade and weather protection to the patrons of the building. The systems also provide prevention from accidental falls and objects being thrown in and out of the garage by limiting the open space in the exterior enclosure of the structure while not creating a ‘ladder’ on the exterior of the building. When planning for structures, every possible outcome and aspect of the construction must be critically reviewed and anticipated, showing the dedication to the process. The trend here has shown that aluminum is the most common medium in fabricating these screening systems. With the versatility and affordability of the material paired with the strength and durability of the metal, it offers a variety of uses that help to keep costs low and benefit impact high. While many high-rise buildings are wrapped in glass windows, this wouldn’t be feasible for a parking garage, by cost or durability of design. In contrast to a glass enclosure, the perforated metal screening allows free air flow, which both helps negate the impact of car exhaust on trees and plants near the garage and allows air movement out of the garage, keeping breathing quality adequate. The aluminum structure also allows for a much longer lifespan. Aluminum mesh can also be painted or coated with a resin that offers a 20-year finish so that the system can match the accompanying building even more, keeping with the distinct visual theme and color scheme. This helps drastically in the effort of creating the most cohesive system with the least amount of upkeep or maintenance. With more designers opting for these systems, it is increasing the LEED credibility of new structures and campuses, further decreasing the environmental strain of new infrastructure. This works by reducing light both in and out of the structure as well as reducing the air pollution from the car exhaust. This trend only seems to be continuing with more garages and similar structures including perforated screening systems and panel-oriented cladding enclosures. These screening systems provide an open aired, safe and visually stimulating addition to a campus that is beneficial to the architects, car owners and neighboring buildings.

<urn:uuid:3aa47841-e265-40a5-a5f3-6720ac1c0f1d>

CC-MAIN-2024-10

https://www.buildingenclosureonline.com/articles/88472-parking-garage-screening-is-moving-full-speed-ahead

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

How to prevent Emails from going to the junk/spam folder instead of INBOX? So the big question is that how to prevent Emails from going to the junk/spam folder instead of INBOX? You can prevent Emails from going to the junk/spam folder and increase your INBOX with these methods that you have to keep in mind while sending emails. Use Genuine and valid Email Data If your email data is not genuine and not valid or exist anymore then your email will bounce and if there is a number of email bounces in each email campaigning then there will be the higher probability of blacklisting of your server. You can use any tool or paid service for the data validation to minimize Here’s a sample signature: Email Us: [email protected] Contact Us: +91 988 109 9186 1st Floor, Ganadhish Empire Pimple Saudagar, Pune, MH India 411027 Catchy Subject Line ‘Our Site Newsletter #1’, use a benefit, ‘Our Site Newsletter: 10 Tips for Financial Freedom’ Gradually Increase Email Sending Volume Do NOT jump directly by sending mass emails from the day. Update Email List No Spam words HTML and Text Version Avoid too many Images You have to avoid too many images in your email and maintain text to image ratio. Kuldeep is a passionate and determined entrepreneur, building internet products since 2015. He is currently leading the marketing & product management team for Goletro Technologies. Let's Build this Thing Together! 1,632 Customers are already sending Millions of emails and generating tons of traffics for their business with BulkEmailSetup. Join The most empowered email sending provider. Our aimed to offer a range of best-value products and services along with cutting-edge technology and dedicated round-the-clock customer support. BulkEmailSetup is fully This site is owned and operated by Goletro Technologies Private Limited

<urn:uuid:85338ad5-5531-43d5-aa60-cf2115737bb3>

CC-MAIN-2024-10

https://www.bulkemailsetup.com/how-to-prevent-emails-from-going-to-the-junkspam-folder-instead-of-inbox/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

CoRe Pro B.V. has recently signed a license agreement with the University of Groningen, making it an official UG spin-off. The signing marks the start of the commercial development of sustainable solutions for thermochemical conversion of renewable materials. CoRe Pro B.V. builds on the ideas of Professor Erik Heeres of the Green Chemical Reaction Engineering section of the Engineering and Technology Institute (ENTEG) at the Faculty of Science and Engineering. His research focuses on the development of efficient catalytic technology for circular carbon conversions. CoRe Pro founder Songbo He did his PhD in Erik Heeres’ research group. Expertise and exclusive patented technologies CoRe Pro B.V. specializes in thermochemical conversion – a cutting-edge process that transforms a diverse range of renewable materials into valuable fuels and chemicals. With a portfolio of exclusively patented technologies, the company is at the forefront of the industry’s drive to decouple fuel and chemical production from fossil resources. CoRe Pro B.V. focuses on unlocking the potential of low-value residual streams, such as biomass, end-of-life materials, and challenging-to-recycle plastics. These materials, which are often overlooked, hold great promise for conversion into essential fuels and chemicals. Bridging the gap: from the early stages to commercialization Although many early-stage projects have emerged from startups, academic groups, and SMEs, they all often run into the same obstacle: the lack of infrastructural testing units to validate and scale their innovative ideas. CoRe Pro B.V. serves as a crucial link by providing not only the necessary infrastructure but also the expertise in chemocatalytic recycling, more specifically catalytic pyrolysis. Dr Songbo He: ‘The signing of the license agreement marks the next phase for CoRe Pro B.V. and our goal to drive sustainable change. By harnessing the power of thermochemical conversion, we empower industries to embrace a greener future.’ More info: www.corepro.eu Doe de quickscan door je gegevens hieronder in te vullen.

<urn:uuid:0bc0df3c-7fb4-41ae-825c-387b99c580a8>

CC-MAIN-2024-10

https://www.businessgeneratorgroningen.com/actualiteit-eng/ug-spin-off-core-pro-b-v-develops-sustainable-solutions-to-convert-renewable-materials-usefully/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Ask high school student to name the capital of France and they will tell you it is Paris. Ask them to name the capital of Iceland, and chances are it takes them a little longer to come up with the right answer. However, ask them for the capital of Greenland and many students may not really know the answer. Continuing to ask someone for the capital of France will not help them to remember the capitals of Iceland and Greenland. This is what Hedderik van Rijn, professor Experimental Psychology at the University of Groningen, also observed. In his research he focused on how we learn, and he developed an algorithm which can detect when knowledge has subsided and when it is time to rehearse the knowledge for the sake of remembrance. This algorithm was the foundation for SlimStampen, an effective learning tool for all kinds of ready knowledge. In other words: facts. Van Rijn explains that during his research he soon realised that his algorithm could the change the way we learn forever. “The problem with traditional learning methods is that they are constantly testing everything, including the facts that you already know. This is not very helpful. The key is to rehearse the facts that we don’t already know by heart at the right moment. Thát is helpful. And this is exactly what SlimStampen does. So yes, I saw the potential of SlimStampen, but I didn’t really know what steps to take to turn this into a successful product. Yes, I was an entrepreneurial researcher, but I was not an entrepreneur just yet. I am sure a lot of researchers will recognise this.” Through his network, van Rijn got in touch with Business Generator Groningen. He got in touch with Frits Wijbenga. Van Rijn: “It so happened that one of my students, who was doing an internship at Noordhoff at the time, told the people at Noordhoff about SlimStampen and they were interested. Business Generator Groningen helped us in drawing up a licencing agreement which allowed Noordhoff to use our SlimStampen program. Their valuable support meant a lot to me, being a researcher, I don’t have a clue about licencing agreements and how to include what is best for both parties. Obviously, this is important because when there is no balance, it could impact the collaboration negatively.” This licencing agreement was the start of a productive collaboration between SlimStampen and Noordhoff. SlimStampen could then be developed into an effective learning tool that is now being used by thousands of high school students on a daily basis. We do also want to mention the collaboration with other parties from the innovation ecosystem, like for instance RUG Ventures and VentureLab. RUG Ventures was the first to invest in SlimStampen and this enabled the people at SlimStampen to further develop the concept and turn it into a mature learning method. According to van Rijn, the program for entrepreneurs offered by VentureLab proved to be essential for starting entrepreneurs. SlimStampen is now a serious start-up with a motivated team and an office in the centre of town. “We work with a business developer, developers, a tester and interns from both the Hanze and the RUG. Right now, our focus is on getting SlimStampen published by a few publishers and training institutes both in the Netherlands and abroad. But most importantly, we continue to invest in our product. At the moment we focus on monitoring the learning process of students in real-time. This helps us to tell whether someone knows the subject. If this is the case than the student receives a mastery credit and if it is not the case than the subject matter will be offered to the student once more, at exactly the right time, based on the algorithm. This concept makes learning more effective and more personal and, in the end, exams will be made redundant over time. This may sound like a big step, but it is closer than you think.” It all started at the University of Groningen, and it is great to realise that the university is now using the learning tool. Van Rijn: “Four faculties are using SlimStampen right now. The university provided the idea for a start-up and now in turn this start-up is attributing to a better university. I really like this kind of reciprocity. This to me is a wonderful example of how scientific research can be used in real life.” “Yes, I was an entrepreneurial researcher, but I was not an entrepreneur just yet. I am sure a lot of researchers will recognise this.” Doe de quickscan door je gegevens hieronder in te vullen.

<urn:uuid:d8f6f1a8-c363-4ae6-804a-bb0ad157e1fe>

CC-MAIN-2024-10

https://www.businessgeneratorgroningen.com/cases/slimstampen-smart-studying-from-smart-algorithm-to-effective-learning-tool-for-ready-knowledge/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Picture Credit: Amy Shamblen The beauty industry has been dominated by well-known brands such as L'Oréal, Unilever and Estée Lauder who have been the front runners in terms of products that they offer to customers. However, most of these products such as shampoo, cream and other make-up products are made out of chemicals acquired from crude oil. Now times are changing as these massive corporations are being pushed by consumers to find better, healthier, and more sustainable alternative ingredients for these products. The road to sustainability for the industry as already begun. “Cosmetics will lead the environmental transition because it’s the first oil-based sector that will completely get rid of oil” comments Marc Delcourt, co-founder and CEO of Global Bioenergies. The industry is investing heavily on finding more sustainably produced products as consumers raise concern for the impact of such products on human health and the environment. However, it’s important to highlight that the industry is not tightly regulated, with little oversight from any independent bodies. So, it’s not common that producers use words like “green” and “organic” a little too loosely for consumers liking, and ultimately end up tricking consumers into buying products under the perception that they are helping reduce the environmental impact. Michelle Wong, a blogger with a Ph.D. in chemistry comments “There are a lot of brands genuinely trying…And there are lots of brands greenwashing, whether they mean it or not”. Picture Credit: Raphael Lovaski Marc Delcourt and his company Global Bioenergies has come up with a method of creating a key element used in most cosmetic products without the use of crude oil. Isododecane is a critical component in making long lasting makeup and had been traditionally sourced through petrochemicals, but Global Bioenergies has managed to create a renewable, plant based Isododecane. Global Bioenergies teamed up with chemists specialising in cosmetics and L'Oréal to make and test their new products. Their new “Last” lineup consists of liquid eyeshadows, waterproof mascaras and liquid lipsticks which were all 90% plant based with Isododecane, vegetable waxes and oil derivatives as the main ingredients. Even their packaging is sourced from recycled plastics and cardboard. However, Global Bioenergies won’t stop there. Next year they are determined to produce several tons of plant based Isododecane to sell to other businesses and help them become more sustainable. Georgie Eisdell, a Los-Angeles based makeup artist comments “For me, if a clean product has the same performance level as a not-clean product, then it’s a very easy choice. Why wouldn’t you use the cleaner product?”. October 19th 2021 | 01.00 PM

<urn:uuid:fa47aba2-555c-4950-bf28-785ff82e8f32>

CC-MAIN-2024-10

https://www.businesslounge.lk/post/triple-bottom-tuesday-make-up-going-green-the-beauty-industry-is-revolutionising-sustainability

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en

Last Updated on: 22nd November 2023, 04:57 pm Half of SMEs (51%) think that the benefits of 5G are being over-hyped and exaggerated. This is according to new research* from Onecom, the UK’s largest independent business telecommunications provider. This finding can partly be explained by the fact that there is some confusion amongst SMEs around what 5G is and the benefits it brings. Some 22% of SMEs describe their understanding of 5G as ‘average’ or as understanding it ‘not very well’, and only 29% describe themselves as understanding 5g ‘very well’. A further 41% say they understand it ‘quite well’. |Not very well Ben Dowd, Onecom CEO said: “5G is one of the most exciting developments in telecoms for years, but our research shows that the industry still has a lot to do in terms of not just explaining how it works but also the benefits it brings and how it could genuinely power growth for SMEs. With that in mind, the main telecoms operators and companies are stepping up their educational and marketing programmes around 5G with clear and relatable use cases. For our part, our customer service team are working hard to give our partners live updates on the latest developments in their areas to give them a better understanding of how 5G works, when it will be available and how their enterprises could potentially benefit from it.” Onecom and 5G? In the longer term Onecom expects 5G to power a range of business products and services, fuelling adoption of the ‘Internet of Things’ and further strengthening the digital infrastructure available to enterprises. In the short-term, Onecom can help businesses get better connected, at far higher speeds. It has a range of 5G devices available to its customers, giving them access to the next generation of mobile technology. Onecom cannot only provide SMEs with 5G mobile devices, it can also offer them Vodafone 5G GigaCube connecting all your employees from one space to 5G. However, not everyone is able to access 5G just yet. You need to be in a city that is 5G ready – but the expansive roll out plan is continuing at pace over the next 12 to 18 months. For further information on how Onecom can help your business benefit from 5G visit https://onecom.co.uk/5g/

<urn:uuid:8afd9a41-c618-470b-a2d2-e2965e176266>

CC-MAIN-2024-10

https://www.businessmole.com/one-in-two-smes-concerned-about-5g-being-overhyped/

s3://commoncrawl/crawl-data/CC-MAIN-2024-10/segments/1707947474715.58/warc/CC-MAIN-20240228112121-20240228142121-00899.warc.gz

en