Debugging¶
Underflow and Overflow Detection¶
Note
This feature is currently available for PyTorch-only.
Note
For multi-GPU training it requires DDP (torch.distributed.launch).
Note
This feature can be used with any nn.Module-based model.
If you start getting loss=NaN or the model inhibits some other abnormal behavior due to inf or nan in
activations or weights one needs to discover where the first underflow or overflow happens and what led to it. Luckily
you can accomplish that easily by activating a special module that will do the detection automatically.
If you’re using Trainer, you just need to add:
--debug underflow_overflow
to the normal command line arguments, or pass debug="underflow_overflow" when creating the
TrainingArguments object.
If you’re using your own training loop or another Trainer you can accomplish the same with:
from .debug_utils import DebugUnderflowOverflow
debug_overflow = DebugUnderflowOverflow(model)
DebugUnderflowOverflow inserts hooks into the model that immediately after each
forward call will test input and output variables and also the corresponding module’s weights. As soon as inf or
nan is detected in at least one element of the activations or weights, the program will assert and print a report
like this (this was caught with google/mt5-small under fp16 mixed precision):
Detected inf/nan during batch_number=0
Last 21 forward frames:
abs min abs max metadata
encoder.block.1.layer.1.DenseReluDense.dropout Dropout
0.00e+00 2.57e+02 input[0]
0.00e+00 2.85e+02 output
[...]
encoder.block.2.layer.0 T5LayerSelfAttention
6.78e-04 3.15e+03 input[0]
2.65e-04 3.42e+03 output[0]
None output[1]
2.25e-01 1.00e+04 output[2]
encoder.block.2.layer.1.layer_norm T5LayerNorm
8.69e-02 4.18e-01 weight
2.65e-04 3.42e+03 input[0]
1.79e-06 4.65e+00 output
encoder.block.2.layer.1.DenseReluDense.wi_0 Linear
2.17e-07 4.50e+00 weight
1.79e-06 4.65e+00 input[0]
2.68e-06 3.70e+01 output
encoder.block.2.layer.1.DenseReluDense.wi_1 Linear
8.08e-07 2.66e+01 weight
1.79e-06 4.65e+00 input[0]
1.27e-04 2.37e+02 output
encoder.block.2.layer.1.DenseReluDense.dropout Dropout
0.00e+00 8.76e+03 input[0]
0.00e+00 9.74e+03 output
encoder.block.2.layer.1.DenseReluDense.wo Linear
1.01e-06 6.44e+00 weight
0.00e+00 9.74e+03 input[0]
3.18e-04 6.27e+04 output
encoder.block.2.layer.1.DenseReluDense T5DenseGatedGeluDense
1.79e-06 4.65e+00 input[0]
3.18e-04 6.27e+04 output
encoder.block.2.layer.1.dropout Dropout
3.18e-04 6.27e+04 input[0]
0.00e+00 inf output
The example output has been trimmed in the middle for brevity.
The second column shows the value of the absolute largest element, so if you have a closer look at the last few frames,
the inputs and outputs were in the range of 1e4. So when this training was done under fp16 mixed precision the very
last step overflowed (since under fp16 the largest number before inf is 64e3). To avoid overflows under
fp16 the activations must remain way below 1e4, because 1e4 * 1e4 = 1e8 so any matrix multiplication with
large activations is going to lead to a numerical overflow condition.
At the very start of the trace you can discover at which batch number the problem occurred (here Detected inf/nan
during batch_number=0 means the problem occurred on the first batch).
Each reported frame starts by declaring the fully qualified entry for the corresponding module this frame is reporting for. If we look just at this frame:
encoder.block.2.layer.1.layer_norm T5LayerNorm
8.69e-02 4.18e-01 weight
2.65e-04 3.42e+03 input[0]
1.79e-06 4.65e+00 output
Here, encoder.block.2.layer.1.layer_norm indicates that it was a layer norm for the first layer, of the second
block of the encoder. And the specific calls of the forward is T5LayerNorm.
Let’s look at the last few frames of that report:
Detected inf/nan during batch_number=0
Last 21 forward frames:
abs min abs max metadata
[...]
encoder.block.2.layer.1.DenseReluDense.wi_0 Linear
2.17e-07 4.50e+00 weight
1.79e-06 4.65e+00 input[0]
2.68e-06 3.70e+01 output
encoder.block.2.layer.1.DenseReluDense.wi_1 Linear
8.08e-07 2.66e+01 weight
1.79e-06 4.65e+00 input[0]
1.27e-04 2.37e+02 output
encoder.block.2.layer.1.DenseReluDense.wo Linear
1.01e-06 6.44e+00 weight
0.00e+00 9.74e+03 input[0]
3.18e-04 6.27e+04 output
encoder.block.2.layer.1.DenseReluDense T5DenseGatedGeluDense
1.79e-06 4.65e+00 input[0]
3.18e-04 6.27e+04 output
encoder.block.2.layer.1.dropout Dropout
3.18e-04 6.27e+04 input[0]
0.00e+00 inf output
The last frame reports for Dropout.forward function with the first entry for the only input and the second for the
only output. You can see that it was called from an attribute dropout inside DenseReluDense class. We can see
that it happened during the first layer, of the 2nd block, during the very first batch. Finally, the absolute largest
input elements was 6.27e+04 and same for the output was inf.
You can see here, that T5DenseGatedGeluDense.forward resulted in output activations, whose absolute max value was
around 62.7K, which is very close to fp16’s top limit of 64K. In the next frame we have Dropout which renormalizes
the weights, after it zeroed some of the elements, which pushes the absolute max value to more than 64K, and we get an
overflow (inf).
As you can see it’s the previous frames that we need to look into when the numbers start going into very large for fp16 numbers.
Let’s match the report to the code from models/t5/modeling_t5.py:
class T5DenseGatedGeluDense(nn.Module):
def __init__(self, config):
super().__init__()
self.wi_0 = nn.Linear(config.d_model, config.d_ff, bias=False)
self.wi_1 = nn.Linear(config.d_model, config.d_ff, bias=False)
self.wo = nn.Linear(config.d_ff, config.d_model, bias=False)
self.dropout = nn.Dropout(config.dropout_rate)
self.gelu_act = ACT2FN["gelu_new"]
def forward(self, hidden_states):
hidden_gelu = self.gelu_act(self.wi_0(hidden_states))
hidden_linear = self.wi_1(hidden_states)
hidden_states = hidden_gelu * hidden_linear
hidden_states = self.dropout(hidden_states)
hidden_states = self.wo(hidden_states)
return hidden_states
Now it’s easy to see the dropout call, and all the previous calls as well.
Since the detection is happening in a forward hook, these reports are printed immediately after each forward
returns.
Going back to the full report, to act on it and to fix the problem, we need to go a few frames up where the numbers
started to go up and most likely switch to the fp32 mode here, so that the numbers don’t overflow when multiplied
or summed up. Of course, there might be other solutions. For example, we could turn off amp temporarily if it’s
enabled, after moving the original forward into a helper wrapper, like so:
def _forward(self, hidden_states):
hidden_gelu = self.gelu_act(self.wi_0(hidden_states))
hidden_linear = self.wi_1(hidden_states)
hidden_states = hidden_gelu * hidden_linear
hidden_states = self.dropout(hidden_states)
hidden_states = self.wo(hidden_states)
return hidden_states
import torch
def forward(self, hidden_states):
if torch.is_autocast_enabled():
with torch.cuda.amp.autocast(enabled=False):
return self._forward(hidden_states)
else:
return self._forward(hidden_states)
Since the automatic detector only reports on inputs and outputs of full frames, once you know where to look, you may
want to analyse the intermediary stages of any specific forward function as well. In such a case you can use the
detect_overflow helper function to inject the detector where you want it, for example:
from debug_utils import detect_overflow
class T5LayerFF(nn.Module):
[...]
def forward(self, hidden_states):
forwarded_states = self.layer_norm(hidden_states)
detect_overflow(forwarded_states, "after layer_norm")
forwarded_states = self.DenseReluDense(forwarded_states)
detect_overflow(forwarded_states, "after DenseReluDense")
return hidden_states + self.dropout(forwarded_states)
You can see that we added 2 of these and now we track if inf or nan for forwarded_states was detected
somewhere in between.
Actually, the detector already reports these because each of the calls in the example above is a nn.Module`, but let’s say if you had some local direct calculations this is how you’d do that.
Additionally, if you’re instantiating the debugger in your own code, you can adjust the number of frames printed from its default, e.g.:
from .debug_utils import DebugUnderflowOverflow
debug_overflow = DebugUnderflowOverflow(model, max_frames_to_save=100)
Specific batch absolute mix and max value tracing¶
The same debugging class can be used for per-batch tracing with the underflow/overflow detection feature turned off.
Let’s say you want to watch the absolute min and max values for all the ingredients of each forward call of a given
batch, and only do that for batches 1 and 3. Then you instantiate this class as:
debug_overflow = DebugUnderflowOverflow(model, trace_batch_nums=[1,3])
And now full batches 1 and 3 will be traced using the same format as the underflow/overflow detector does.
Batches are 0-indexed.
This is helpful if you know that the program starts misbehaving after a certain batch number, so you can fast-forward right to that area. Here is a sample truncated output for such configuration:
*** Starting batch number=1 ***
abs min abs max metadata
shared Embedding
1.01e-06 7.92e+02 weight
0.00e+00 2.47e+04 input[0]
5.36e-05 7.92e+02 output
[...]
decoder.dropout Dropout
1.60e-07 2.27e+01 input[0]
0.00e+00 2.52e+01 output
decoder T5Stack
not a tensor output
lm_head Linear
1.01e-06 7.92e+02 weight
0.00e+00 1.11e+00 input[0]
6.06e-02 8.39e+01 output
T5ForConditionalGeneration
not a tensor output
*** Starting batch number=3 ***
abs min abs max metadata
shared Embedding
1.01e-06 7.92e+02 weight
0.00e+00 2.78e+04 input[0]
5.36e-05 7.92e+02 output
[...]
Here you will get a huge number of frames dumped - as many as there were forward calls in your model, so it may or may not what you want, but sometimes it can be easier to use for debugging purposes than a normal debugger. For example, if a problem starts happening at batch number 150. So you can dump traces for batches 149 and 150 and compare where numbers started to diverge.
You can also specify the batch number after which to stop the training, with:
debug_overflow = DebugUnderflowOverflow(model, trace_batch_nums=[1,3], abort_after_batch_num=3)