id
stringlengths 9
13
| title
stringlengths 18
239
| abstract
stringlengths 75
2.4k
|
|---|---|---|
1801.07660 | Bayesian reconstruction of HIV transmission trees from viral sequences
and uncertain infection times | Genetic sequence data of pathogens are increasingly used to investigate
transmission dynamics in both endemic diseases and disease outbreaks; such
research can aid in development of appropriate interventions and in design of
studies to evaluate them. Several methods have been proposed to infer
transmission chains from sequence data; however, existing methods do not
generally reliably reconstruct transmission trees because genetic sequence data
or inferred phylogenetic trees from such data are insufficient for accurate
inference regarding transmission chains. In this paper, we demonstrate the lack
of a one-to-one relationship between phylogenies and transmission trees, and
also show that information regarding infection times together with genetic
sequences permit accurate reconstruction of transmission trees. We propose a
Bayesian inference method for this purpose and demonstrate that precision of
inference regarding these transmission trees depends on precision of the
estimated times of infection. We also illustrate the use of these methods to
study features of epidemic dynamics, such as the relationship between
characteristics of nodes and average number of outbound edges or inbound
edges-- signifying possible transmission events from and to nodes. We study the
performance of the proposed method in simulation experiments and demonstrate
its superiority in comparison to an alternative method. We apply them to a
transmission cluster in San Diego and investigate the impact of biological,
behavioral, and demographic factors. |
1801.08447 | Loss-function learning for digital tissue deconvolution | The gene expression profile of a tissue averages the expression profiles of
all cells in this tissue. Digital tissue deconvolution (DTD) addresses the
following inverse problem: Given the expression profile $y$ of a tissue, what
is the cellular composition $c$ of that tissue? If $X$ is a matrix whose
columns are reference profiles of individual cell types, the composition $c$
can be computed by minimizing $\mathcal L(y-Xc)$ for a given loss function
$\mathcal L$. Current methods use predefined all-purpose loss functions. They
successfully quantify the dominating cells of a tissue, while often falling
short in detecting small cell populations.
Here we learn the loss function $\mathcal L$ along with the composition $c$.
This allows us to adapt to application-specific requirements such as focusing
on small cell populations or distinguishing phenotypically similar cell
populations. Our method quantifies large cell fractions as accurately as
existing methods and significantly improves the detection of small cell
populations and the distinction of similar cell types. |
1801.09372 | Extension of the non-parametric cluster-based time-frequency statistics
to the full time windows and to single condition tests | Oscillatory processes are central for the understanding of the neural bases
of cognition and behaviour. To analyse these processes, time-frequency (TF)
decomposition methods are applied and non-parametric cluster-based statistical
procedure are used for comparing two or more conditions. While this combination
is a powerful method, it has two drawbacks. One the unreliable estimation of
signals outside the cone-of-influence and the second relates to the length of
the time frequency window used for the analysis. Both impose constrains on the
non-parametric statistical procedure for inferring an effect in the TF domain.
Here we extend the method to reliably infer oscillatory differences within the
full TF map and to test single conditions. We show that it can be applied in
small time windows irrespective of the cone-of-influence and we further develop
its application to single-condition case for testing the hypothesis of the
presence or not of time-varying signals. We present tests of this new method on
real EEG and behavioural data and show that its sensitivity to single-condition
tests is at least as good as classic Fourier analysis. Statistical inference in
the full TF map is available and efficient in detecting differences between
conditions as well as the presence of time-varying signal in single condition. |
1801.09831 | Evaluation of Parallel Tempering to Accelerate Bayesian Parameter
Estimation in Systems Biology | Models of biological systems often have many unknown parameters that must be
determined in order for model behavior to match experimental observations.
Commonly-used methods for parameter estimation that return point estimates of
the best-fit parameters are insufficient when models are high dimensional and
under-constrained. As a result, Bayesian methods, which treat model parameters
as random variables and attempt to estimate their probability distributions
given data, have become popular in systems biology. Bayesian parameter
estimation often relies on Markov Chain Monte Carlo (MCMC) methods to sample
model parameter distributions, but the slow convergence of MCMC sampling can be
a major bottleneck. One approach to improving performance is parallel tempering
(PT), a physics-based method that uses swapping between multiple Markov chains
run in parallel at different temperatures to accelerate sampling. The
temperature of a Markov chain determines the probability of accepting an
unfavorable move, so swapping with higher temperatures chains enables the
sampling chain to escape from local minima. In this work we compared the MCMC
performance of PT and the commonly-used Metropolis-Hastings (MH) algorithm on
six biological models of varying complexity. We found that for simpler models
PT accelerated convergence and sampling, and that for more complex models, PT
often converged in cases MH became trapped in non-optimal local minima. We also
developed a freely-available MATLAB package for Bayesian parameter estimation
called PTempEst (http://github.com/RuleWorld/ptempest), which is closely
integrated with the popular BioNetGen software for rule-based modeling of
biological systems. |
1801.10189 | Public archives for biological image data | Public data archives are the backbone of modern biological and biomedical
research. While archives for biological molecules and structures are
well-established, resources for imaging data do not yet cover the full range of
spatial and temporal scales or application domains used by the scientific
community. In the last few years, the technical barriers to building such
resources have been solved and the first examples of scientific outputs from
public image data resources, often through linkage to existing molecular
resources, have been published. Using the successes of existing biomolecular
resources as a guide, we present the rationale and principles for the
construction of image data archives and databases that will be the foundation
of the next revolution in biological and biomedical informatics and discovery. |
1801.10195 | FoodRepo: An Open Food Repository of Barcoded Food Products | In the past decade, digital technologies have started to profoundly influence
healthcare systems. Digital self-tracking has facilitated more precise
epidemiological studies, and in the field of nutritional epidemiology, mobile
apps have the potential to alleviate a significant part of the journaling
burden by, for example, allowing users to record their food intake via a simple
scan of packaged products barcodes. Such studies thus rely on databases of
commercialized products, their barcodes, ingredients, and nutritional values,
which are not yet openly available with sufficient geographical and product
coverage. In this paper, we present FoodRepo (https://www.foodrepo.org), an
open food repository of barcoded food items, whose database is programmatically
accessible through an application programming interface (API). Furthermore, an
open source license gives the appropriate rights to anyone to share and reuse
FoodRepo data, including for commercial purposes. With currently more than
21,000 items available on the Swiss market, our database represents a solid
starting point for large-scale studies in the field of digital nutrition, with
the aim to lead to a better understanding of the intricate connections between
diets and health in general, and metabolic disorders in particular. |
1802.01211 | Quasi-Monte Carlo methods applied to tau-leaping in stochastic
biological systems | Quasi-Monte Carlo methods have proven to be effective extensions of
traditional Monte Carlo methods in, amongst others, problems of quadrature and
the sample path simulation of stochastic differential equations. By replacing
the random number input stream in a simulation procedure by a low-discrepancy
number input stream, variance reductions of several orders have been observed
in financial applications.
Analysis of stochastic effects in well-mixed chemical reaction networks often
relies on sample path simulation using Monte Carlo methods, even though these
methods suffer from typical slow $\mathcal{O}(N^{-1/2})$ convergence rates as a
function of the number of sample paths $N$. This paper investigates the
combination of (randomised) quasi-Monte Carlo methods with an efficient sample
path simulation procedure, namely $\tau$-leaping. We show that this combination
is often more effective than traditional Monte Carlo simulation in terms of the
decay of statistical errors. The observed convergence rate behaviour is,
however, non-trivial due to the discrete nature of the models of chemical
reactions. We explain how this affects the performance of quasi-Monte Carlo
methods by looking at a test problem in standard quadrature. |
1802.01833 | How far can neural correlations reduce uncertainty? Comparison of
Information Transmission Rates for Markov and Bernoulli processes | The nature of neural codes is central to neuroscience. Do neurons encode
information through relatively slow changes in the emission rates of individual
spikes (rate code), or by the precise timing of every spike (temporal codes)?
Here we compare the loss of information due to correlations for these two
possible neural codes. The essence of Shannon's definition of information is to
combine information with uncertainty: the higher the uncertainty of a given
event, the more information is conveyed by that event. Correlations can reduce
uncertainty or the amount of information, but by how much? In this paper we
address this question by a direct comparison of the information per symbol
conveyed by the words coming from a binary Markov source (temporal codes) with
the information per symbol coming from the corresponding Bernoulli source
(uncorrelated, rate code source). In a previous paper we found that a crucial
role in the relation between Information Transmission Rates (ITR) and Firing
Rates is played by a parameter s, which is the sum of transitions probabilities
from the no-spike-state to the spike-state and vice versa. It turned out that
also in this case a crucial role is played by the same parameter s. We found
bounds of the quotient of ITRs for these sources, i.e. this quotient's minimal
and maximal values. Next, making use of the entropy grouping axiom, we
determined the loss of information in a Markov source in relation to its
corresponding Bernoulli source for a given length of word. Our results show
that in practical situations in the case of correlated signals the loss of
information is relatively small, thus temporal codes, which are more
energetically efficient, can replace the rate code effectively. These phenomena
were confirmed by experiments. |
1802.02268 | Unified Bayesian estimator of EEG reference at infinity: rREST | The choice of reference for electroencephalogram (EEG) is a long-lasting
unsolved issue resulting in inconsistent usages and endless debates. Currently,
both average reference (AR) and reference electrode standardization technique
(REST) are two primary, irreconcilable contenders. We propose a theoretical
framework to resolve this issue by formulating both a) estimation of potentials
at infinity, and, b) determination of the reference, as a unified Bayesian
linear inverse problem. We find that AR and REST are very particular cases of
this unified framework: AR results from biophysically non-informative prior;
while REST utilizes the prior of EEG generative model. We develop the
regularized versions of AR and REST, named rAR, and rREST, respectively. Both
depend on a regularization parameter that is the noise to signal ratio.
Traditional and new estimators are evaluated with this framework, by both
simulations and analysis of real EEGs. Generated artificial EEGs, show that
relative error in estimating the EEG potentials at infinity is lowest for
rREST. It also reveals that realistic volume conductor models improve the
performances of REST and rREST. For practical applications, it is shown that
average lead field gives the results comparable to the individual lead field.
Finally, it is shown that the selection of the regularization parameter with
Generalized Cross-Validation (GCV) is close to the 'oracle' choice based on the
ground truth. When evaluated with the real 89 resting state EEGs, rREST
consistently yields the lowest GCV. This study provides a novel perspective on
the EEG reference problem by means of a unified inverse solution framework. It
may allow additional principled theoretical formulations and numerical
evaluation of performance. |
1802.02677 | Clustering Gene Expression Time Series with Coregionalization: Speed
propagation of ALS | Clustering of gene expression time series gives insight into which genes may
be coregulated, allowing us to discern the activity of pathways in a given
microarray experiment. Of particular interest is how a given group of genes
varies with different model conditions or genetic background. Amyotrophic
lateral sclerosis (ALS), an irreversible diverse neurodegenerative disorder
showed consistent phenotypic differences and the disease progression is
heterogeneous with significant variability. This paper demonstrated about
finding some significant gene expression profiles and its associated or
co-regulated cluster of gene expressions from four groups of data with
different genetic background or models conditions. Gene enrichment score
analysis and pathway analysis of judicially selected clusters lead toward
identifying features underlying the differential speed of disease progression.
Gene ontology overrepresentation analysis showed clusters from the proposed
method are less likely to be clustered just by chance. In this paper, we
develop a new clustering method that allows each cluster to be parameterised
according to whether the behaviour of the genes across conditions is correlated
or anti-correlated. Our proposed method unveil the potency of latent
information shared between multiple model conditions and their replicates
during modelling gene expression data. |
1802.03223 | Maximum Lyapunov exponent revisited: Long-term attractor divergence of
gait dynamics is highly sensitive to the noise structure of stride intervals | The local dynamic stability method (maximum Lyapunov exponent) can assess
gait stability. Two variants of the method exist: the short-term divergence
exponent (DE), and the long-term DE. Only the short-term DE can predict fall
risk. The significance of long-term DE has been unclear so far. Some studies
have suggested that the complex, fractal-like structure of fluctuations among
consecutive strides correlates with long-term DE. The aim, therefore, was to
assess whether the long-term DE is a gait complexity index. The study
reanalyzed a dataset of trunk accelerations from 100 healthy adults walking at
preferred speed on a treadmill for 10 minutes. By interpolation, the stride
intervals were modified within the acceleration signals for the purpose of
conserving the original shape of the signal, while imposing a known
stride-to-stride fluctuation structure. 4 types of hybrid signals with
different noise structures were built: constant, anti-correlated, random, and
correlated (fractal). Short- and long-term DEs were then computed. The results
show that long-term DEs, but not short-term DEs, are sensitive to the noise
structure of stride intervals. It was that observed that random hybrid signals
exhibited significantly lower long-term DEs than hybrid correlated signals did
(0.100 vs 0.144, i.e. a 44% difference). Long-term DEs from constant hybrid
signals were close to zero (0.006). Short-term DEs of anti-correlated, random,
and correlated hybrid signals were closely grouped (2.49, 2.50, and 2.51). The
short- and long-term DEs, although they are both computed from divergence
curves, should not be interpreted in a similar way. The long-term DE is very
likely an index of gait complexity, which may be associated with gait
automaticity or cautiousness. To better differentiate between short- and
long-term DEs, the use of the term attractor complexity index (ACI) is proposed
for the latter. |
1802.04532 | Blue mussel shell shape plasticity and natural environments: a
quantitative approach | Shape variability represents an important direct response of organisms to
selective environments. Here, we use a combination of geometric morphometrics
and generalised additive mixed models (GAMMs) to identify spatial patterns of
natural shell shape variation in the North Atlantic and Arctic blue mussels,
Mytilus edulis and M. trossulus, with environmental gradients of temperature,
salinity and food availability across 3980 km of coastlines. New statistical
methods and multiple study systems at various geographical scales allowed the
uncoupling of the developmental and genetic contributions to shell shape and
made it possible to identify general relationships between blue mussel shape
variation and environment that are independent of age and species influences.
We find salinity had the strongest effect on the latitudinal patterns of
Mytilus shape, producing shells that were more elongated, narrower and with
more parallel dorsoventral margins at lower salinities. Temperature and food
supply, however, were the main drivers of mussel shape heterogeneity. Our
findings revealed similar shell shape responses in Mytilus to less favourable
environmental conditions across the different geographical scales analysed. Our
results show how shell shape plasticity represents a powerful indicator to
understand the alterations of blue mussel communities in rapidly changing
environments. |
1802.05646 | 4D blood flow mapping using SPIM-microPIV in the developing zebrafish
heart | Fluid-structure interaction in the developing heart is an active area of
research in developmental biology. However, investigation of heart dynamics is
mostly limited to computational fluid dynamics simulations using heart wall
structure information only, or single plane blood flow information - so there
is a need for 3D + time resolved data to fully understand cardiac function. We
present an imaging platform combining selective plane illumination microscopy
(SPIM) with micro particle image velocimetry ({\textmu}PIV) to enable
3D-resolved flow mapping in a microscopic environment, free from many of the
sources of error and bias present in traditional epifluorescence-based
{\textmu}PIV systems. By using our new system in conjunction with optical heart
beat synchronisation, we demonstrte the ability obtain non-invasive 3D + time
resolved blood flow measurements in the heart of a living zebrafish embryo. |
1802.06827 | Theory of Morphogenesis | A model of morphogenesis is proposed based on seven explicit postulates. The
mathematical import and biological significance of the postulates are explored
and discussed. |
1802.10080 | Simulation of live-cell imaging system reveals hidden uncertainties in
cooperative binding measurements | We propose a computational method to quantitatively evaluate the systematic
uncertainties that arise from undetectable sources in biological measurements
using live-cell imaging techniques. We then demonstrate this method in
measuring biological cooperativity of molecular binding networks: in
particular, ligand molecules binding to cell surface receptor proteins. Our
results show how the non-statistical uncertainties lead to invalid
identification of the measured cooperativity. Through this computational
scheme, the biological interpretation can be more objectively evaluated and
understood under a specific experimental configuration of interest. |
1803.04659 | Protein Mutation Stability Ternary Classification using Neural Networks
and Rigidity Analysis | Discerning how a mutation affects the stability of a protein is central to
the study of a wide range of diseases. Machine learning and statistical
analysis techniques can inform how to allocate limited resources to the
considerable time and cost associated with wet lab mutagenesis experiments. In
this work we explore the effectiveness of using a neural network classifier to
predict the change in the stability of a protein due to a mutation. Assessing
the accuracy of our approach is dependent on the use of experimental data about
the effects of mutations performed in vitro. Because the experimental data is
prone to discrepancies when similar experiments have been performed by multiple
laboratories, the use of the data near the juncture of stabilizing and
destabilizing mutations is questionable. We address this later problem via a
systematic approach in which we explore the use of a three-way classification
scheme with stabilizing, destabilizing, and inconclusive labels. For a
systematic search of potential classification cutoff values our classifier
achieved 68 percent accuracy on ternary classification for cutoff values of
-0.6 and 0.7 with a low rate of classifying stabilizing as destabilizing and
vice versa. |
1803.05012 | Using RuleBuilder to graphically define and visualize BioNetGen-language
patterns and reaction rules | RuleBuilder is a tool for drawing graphs that can be represented by the
BioNetGen language (BNGL), which is used to formulate mathematical, rule-based
models of biochemical systems. BNGL provides an intuitive plain-text, or
string, representation of such systems, which is based on a graphical
formalism. Reactions are defined in terms of graph-rewriting rules that specify
the necessary intrinsic properties of the reactants, a transformation, and a
rate law. Rules may also contain contextual constraints that restrict
application of the rule. In some cases, the specification of contextual
constraints can be verbose, making a rule difficult to read. RuleBuilder is
designed to ease the task of reading and writing individual reaction rules, as
well as individual BNGL patterns similar to those found in rules. The software
assists in the reading of existing models by converting BNGL strings of
interest into a graph-based representation composed of nodes and edges.
RuleBuilder also enables the user to construct de novo a visual representation
of BNGL strings using drawing tools available in its interface. As objects are
added to the drawing canvas, the corresponding BNGL string is generated on the
fly, and objects are similarly drawn on the fly as BNGL strings are entered
into the application. RuleBuilder thus facilitates construction and
interpretation of rule-based models. |
1803.06002 | Ridge Regression Estimated Linear Probability Model Predictions of
N-glycosylation in Proteins with Structural and Sequence Data | Absent experimental evidence, a robust methodology to predict the likelihood
of N-glycosylation in human proteins is essential for guiding experimental
work. Based on the distribution of amino acids in the neighborhood of the NxS/T
sequon (N-site); the structural attributes of the N-site that include
Accessible Surface Area, secondary structural elements, main-chain phi-psi,
turn types; the relative location of the N-site in the primary sequence; and
the nature of the glycan bound, the ridge regression estimated linear
probability model is used to predict this likelihood. This model yields a
Kolmogorov-Smirnov (Gini coefficient) statistic value of about 74% (89%), which
is reasonable. |
1803.07850 | Contribution of Data Categories to Readmission Prediction Accuracy | Identification of patients at high risk for readmission could help reduce
morbidity and mortality as well as healthcare costs. Most of the existing
studies on readmission prediction did not compare the contribution of data
categories. In this study we analyzed relative contribution of 90,101 variables
across 398,884 admission records corresponding to 163,468 patients, including
patient demographics, historical hospitalization information, discharge
disposition, diagnoses, procedures, medications and laboratory test results. We
established an interpretable readmission prediction model based on Logistic
Regression in scikit-learn, and added the available variables to the model one
by one in order to analyze the influences of individual data categories on
readmission prediction accuracy. Diagnosis related groups (c-statistic
increment of 0.0933) and discharge disposition (c-statistic increment of
0.0269) were the strongest contributors to model accuracy. Additionally, we
also identified the top ten contributing variables in every data category. |
1803.09721 | Efficient algorithms to discover alterations with complementary
functional association in cancer | Recent large cancer studies have measured somatic alterations in an
unprecedented number of tumours. These large datasets allow the identification
of cancer-related sets of genetic alterations by identifying relevant
combinatorial patterns. Among such patterns, mutual exclusivity has been
employed by several recent methods that have shown its effectivenes in
characterizing gene sets associated to cancer. Mutual exclusivity arises
because of the complementarity, at the functional level, of alterations in
genes which are part of a group (e.g., a pathway) performing a given function.
The availability of quantitative target profiles, from genetic perturbations or
from clinical phenotypes, provides additional information that can be leveraged
to improve the identification of cancer related gene sets by discovering groups
with complementary functional associations with such targets.
In this work we study the problem of finding groups of mutually exclusive
alterations associated with a quantitative (functional) target. We propose a
combinatorial formulation for the problem, and prove that the associated
computation problem is computationally hard. We design two algorithms to solve
the problem and implement them in our tool UNCOVER. We provide analytic
evidence of the effectiveness of UNCOVER in finding high-quality solutions and
show experimentally that UNCOVER finds sets of alterations significantly
associated with functional targets in a variety of scenarios. In addition, our
algorithms are much faster than the state-of-the-art, allowing the analysis of
large datasets of thousands of target profiles from cancer cell lines. We show
that on one such dataset from project Achilles our methods identify several
significant gene sets with complementary functional associations with targets. |
1803.10829 | Learn to segment single cells with deep distance estimator and deep cell
detector | Single cell segmentation is critical and challenging in live cell imaging
data analysis. Traditional image processing methods and tools require
time-consuming and labor-intensive efforts of manually fine-tuning parameters.
Slight variations of image setting may lead to poor segmentation results.
Recent development of deep convolutional neural networks(CNN) provides a
potentially efficient, general and robust method for segmentation. Most
existing CNN-based methods treat segmentation as a pixel-wise classification
problem. However, three unique problems of cell images adversely affect
segmentation accuracy: lack of established training dataset, few pixels on cell
boundaries, and ubiquitous blurry features. The problem becomes especially
severe with densely packed cells, where a pixel-wise classification method
tends to identify two neighboring cells with blurry shared boundary as one
cell, leading to poor cell count accuracy and affecting subsequent analysis.
Here we developed a different learning strategy that combines strengths of CNN
and watershed algorithm. The method first trains a CNN to learn Euclidean
distance transform of binary masks corresponding to the input images. Then
another CNN is trained to detect individual cells in the Euclidean distance
transform. In the third step, the watershed algorithm takes the outputs from
the previous steps as inputs and performs the segmentation. We tested the
combined method and various forms of the pixel-wise classification algorithm on
segmenting fluorescence and transmitted light images. The new method achieves
similar pixel accuracy but significant higher cell count accuracy than
pixel-wise classification methods do, and the advantage is most obvious when
applying on noisy images of densely packed cells. |
1804.00841 | Fixed-Parameter Tractable Sampling for RNA Design with Multiple Target
Structures | The design of multi-stable RNA molecules has important applications in
biology, medicine, and biotechnology. Synthetic design approaches profit
strongly from effective in-silico methods, which can tremendously impact their
cost and feasibility. We revisit a central ingredient of most in-silico design
methods: the sampling of sequences for the design of multi-target structures,
possibly including pseudoknots. For this task, we present the efficient, tree
decomposition-based algorithm. Our fixed parameter tractable approach is
underpinned by establishing the P-hardness of uniform sampling. Modeling the
problem as a constraint network, our program supports generic
Boltzmann-weighted sampling for arbitrary additive RNA energy models; this
enables the generation of RNA sequences meeting specific goals like expected
free energies or \GCb-content. Finally, we empirically study general properties
of the approach and generate biologically relevant multi-target
Boltzmann-weighted designs for a common design benchmark. Generating seed
sequences with our program, we demonstrate significant improvements over the
previously best multi-target sampling strategy (uniform sampling).Our software
is freely available at: https://github.com/yannponty/RNARedPrint . |
1804.03528 | The Quaternion-Based Spatial Coordinate and Orientation Frame Alignment
Problems | We review the general problem of finding a global rotation that transforms a
given set of points and/or coordinate frames (the "test" data) into the best
possible alignment with a corresponding set (the "reference" data). For 3D
point data, this "orthogonal Procrustes problem" is often phrased in terms of
minimizing a root-mean-square deviation or RMSD corresponding to a Euclidean
distance measure relating the two sets of matched coordinates. We focus on
quaternion eigensystem methods that have been exploited to solve this problem
for at least five decades in several different bodies of scientific literature
where they were discovered independently. While numerical methods for the
eigenvalue solutions dominate much of this literature, it has long been
realized that the quaternion-based RMSD optimization problem can also be solved
using exact algebraic expressions based on the form of the quartic equation
solution published by Cardano in 1545; we focus on these exact solutions to
expose the structure of the entire eigensystem for the traditional 3D spatial
alignment problem. We then explore the structure of the less-studied
orientation data context, investigating how quaternion methods can be extended
to solve the corresponding 3D quaternion orientation frame alignment (QFA)
problem, noting the interesting equivalence of this problem to the
rotation-averaging problem, which also has been the subject of independent
literature threads. We conclude with a brief discussion of the combined 3D
translation-orientation data alignment problem. Appendices are devoted to a
tutorial on quaternion frames, a related quaternion technique for extracting
quaternions from rotation matrices, and a review of quaternion
rotation-averaging methods relevant to the orientation-frame alignment problem.
Supplementary Material covers extensions of quaternion methods to the 4D
problem. |
1804.05129 | A survey and a new selection criterion for statistical home range
estimation | The home range of a specific animal describes the geographic area where this
individual spends most of the time while carrying out its usual activities
(eating, resting, reproduction, ...). Although a well-established definition of
this concept is lacking, there is a variety of home range estimators. The first
objective of this work is to review and categorize the statistical
methodologies proposed in the literature to approximate the home range of an
animal, based on a sample of observed locations. The second aim is to address
the open question of choosing the "best" home range from a collection of them
based on the same sample. We introduce a numerical index, based on a
penalization criterion, to rank the estimated home ranges. The key idea is to
balance the excess area covered by the estimator (with respect to the original
sample) and a shape descriptor measuring the over-adjustment of the home range
to the data. To our knowledge, apart from computing the home range area, our
ranking procedure is the first one which is both applicable to real data and to
any type of home range estimator. Further, the optimization of the selection
index provides in fact a way to select the smoothing parameter for the kernel
home range estimator. For clarity of exposition, we have applied all the
estimation procedures and our selection proposal to a set of real locations of
a Mongolian wolf using R as the statistical software. As a byproduct, this
review contains a thorough revision of the implementation of home range
estimators in the R language. |
1804.05175 | Amino-acid network clique analysis of protein mutation correlation
effects: a case study of lysozme | Optimizing amino-acid mutations has been a most challenging task in modern
bio- industrial enzyme designing. It is well known that many successful designs
often hinge on extensive correlations among mutations at different sites within
the enzyme, however, the underpinning mechanism for these correlations is far
from clear. Here, we present a topology-based model to quantitively
characterize correlation effects between mutations. The method is based on the
molecular dynamic simulations and the amino-acid network clique analysis that
simply examines if two single mutation sites belong to some 3-clique. We
analyzed 13 dual mutations of T4 phage lysozyme and found that the clique-based
model successfully distinguishes highly correlated or non-additive double-site
mutations from those with less correlation or additive mutations. We also
applied the model to the protein Eglin c whose topology is significantly
distinct from that of T4 phage lysozyme, and found that the model can, to some
extension, still identify non-additive mutations from additive ones. Our
calculations showed that mutation correlation effects may heavily depend on
topology relationship among mutation sites, which can be quantitatively
characterized using amino-acid network k-cliques. We also showed that
double-site mutation correlations can be significantly altered by exerting a
third mutation, indicating that more detailed physico-chemistry interactions
might be considered with the network model for better understanding of the
elusive mutation-correlation principle. |
1804.05351 | Intertrochanteric Fracture Visualization and Analysis Using a Map
Projection Technique | Understanding intertrochanteric fracture distribution is an important topic
in orthopaedics due to its high morbidity and mortality. The intertrochanteric
fracture can contain high-dimensional information including complicated 3D
fracture lines, which often make it difficult to visualize or to obtain
valuable statistics for clinical diagnosis and prognosis applications. This
paper proposed a map projection technique to map the high-dimensional
information into a 2D parametric space. This method can preserve the 3D
proximal femur surface and structure while visualizing the entire fracture line
with a single plot/view. Using this method and a standardization technique, a
total of 100 patients with different ages and genders are studied based on the
original radiographs acquired by CT scan. The comparison shows that the
proposed map projection representation is more efficient and rich in
information visualization than the conventional heat map technique. Using the
proposed method, a fracture probability can be obtained at any location in the
2D parametric space, from which the most probable fracture region can be
accurately identified. The study shows that age and gender have significant
influences on intertrochanteric fracture frequency and fracture line
distribution. |
1804.05961 | Universal statistics of incubation periods and other detection times via
diffusion models | We suggest an explanation of typical incubation times statistical features
based on the universal behavior of exit times for diffusion models. We give a
mathematically rigorous proof of the characteristic right skewness of the
incubation time distribution for very general one-dimensional diffusion models.
Imposing natural simple conditions on the drift coefficient, we also study
these diffusion models under the assumption of noise smallness and show that
the limiting exit time distributions in the limit of vanishing noise are
Gaussian and Gumbel. Thus they match the existing data as well as the other
existing models do. The character of our models, however, allows us to argue
that the features of the exit time distributions that we describe are universal
and manifest themselves in various other situations where the times involved
can be described as detection or halting times, for example, response times
studied in psychology. |
1804.10667 | Unified representation of the C3, C4, and CAM photosynthetic pathways
with the Photo3 model | Recently, interest in crassulacean acid metabolism (CAM) photosynthesis has
risen and new, physiologically based CAM models have emerged. These models show
promise, yet unlike the more widely used physiological models of C3 and C4
photosynthesis, their complexity has thus far inhibited their adoption in the
general community. Indeed, most efforts to assess the potential of CAM still
rely on empirically based environmental productivity indices, which makes
uniform comparisons between CAM and non-CAM species difficult. In order to
represent C3, C4, and CAM photosynthesis in a consistent, physiologically based
manner, we introduce the Photo3 model. This work builds on a common
photosynthetic and hydraulic core and adds additional components to depict the
circadian rhythm of CAM photosynthesis and the carbon-concentrating mechanism
of C4 photosynthesis. This allows consistent comparisons of the three
photosynthetic types for the first time. It also allows the representation of
intermediate C3-CAM behavior through the adjustment of a single model
parameter. Model simulations of *Opuntia ficus-indica* (CAM), *Sorghum bicolor*
(C4), and *Triticum aestivum* (C3) capture the diurnal behavior of each species
as well as the cumulative effects of long-term water limitation. The results
show potential for use in understanding CAM productivity, ecology, and climate
feedbacks and in evaluating the tradeoffs between C3, C4, and CAM
photosynthesis. |
1804.11226 | Sample Size for Concurrent Species Detection in a Species-Rich
Assemblage | Monitoring the distribution of microfossils in stratigraphic successions is
an essential tool for biostratigraphic, evolutionary and
paleoecologic/paleoceanographic studies. To estimate the relative abundance (%)
of a given species, it is necessary to estimate in advance the minimum number
of specimens to be used in the count (n). This requires an a priori assumption
about a specified level of confidence, and about the species population
proportion (p). It is common use to apply the binomial distribution to
determine n to detect the presence of more than one species in the same sample,
although the multinomial distribution should necessarily be used instead.
The mathematical theory of sample size computation using the multinomial
distribution is adapted to the computation of n for any number of species to be
detected together (K) at any level of confidence. Easy-to-use extensive tables
show n, for a combination of K and p. These tables indicate a large difference
for n between that indicated by the binomial and those by the multinomial
distribution when many species are to be detected simultaneously. Counting only
300 specimens (with 95 % confidence level) or 500 (99 %) is not enough to
detect more than one taxon.
The reconstructed history of the micro-biosphere may therefore, in many
instances, need to be largely revised. This revision should affect our
understanding of the ecological and evolutionary relationships between the past
changes in the biosphere and the other major reservoirs (hydrosphere, geosphere
and atmosphere). In biostratigraphy and biochronology, using a much larger
sample size, when more than one marker species is to be detected in the
neighborhood of the same biozone boundary, may help clarifying the nature of
the apparent inconsistencies given by the observed reversals in the ordinal
(rank) biostratigraphic data shown as intersections of the correlation lines |
1805.00674 | Use of accelerometers to measure physical activity of group-housed
pregnant sows. Method development and use in six pig herds | The development of precision livestock farming which adjusts the food needs
of each animal requires detailed knowledge of its behavior and particularly
physical activity. Individual differences between animals can be observed for
group-housed sows. Accelerometer technology offers opportunities for automatic
monitoring of animal behavior. The aim of the first step was to develop a
methodology to attach the accelerometer on the sow's leg, and an algorithm to
automatically detect standing and lying posture. Accelerometers (Hobo Pendant
G) were put in a metal case and fastened with two cable ties on the leg of 6
group-housed sows. The data loggers recorded the acceleration on one axis every
20 s. Data were then validated by 9 hours of direct observations. The automatic
recording device showed data of high sensitivity (98.8%) and specificity
(99.8%). Then, accelerometers were placed on 12 to 13 group-housed sows for 2
to 4 consecutive days in 6 commercial farms equipped with electronic sow
feeding. On average each day, sows spent 259 minutes ($\pm$ 114) standing and
changed posture 29 ($\pm$ 12) times. The sow's standing time was repeatable day
to day. Differences between sows and herds were significant. Based on
behavioral data, 5 categories of sows were identified. This study suggests that
the consideration of individual behavior of each animal would improve herd
management. |
1805.01349 | Improved resection margins in breast-conserving surgery using Terahertz
Pulsed imaging data | New statistical methods were employed to improve the ability to distinguish
benign from malignant breast tissue ex vivo in a recent study. The ultimately
aim was to improve the intraoperative assessment of positive tumour margins in
breast-conserving surgery (BCS), potentially reducing patient re-operation
rates. A multivariate Bayesian classifier was applied to the waveform samples
produced by a Terahertz Pulsed Imaging (TPI) handheld probe system in order to
discriminate tumour from benign breast tissue, obtaining a sensitivity of 96%
and specificity of 95%.
We compare these results to traditional and to state-of-the-art methods for
determining resection margins. Given the general nature of the classifier, it
is expected that this method can be applied to other tumour types where
resection margins are also critical. |
1805.03227 | Animal Movement Tools (amt): R-Package for Managing Tracking Data and
Conducting Habitat Selection Analyses | 1. Advances in tracking technology have led to an exponential increase in
animal location data, greatly enhancing our ability to address interesting
questions in movement ecology, but also presenting new challenges related to
data manage- ment and analysis. 2. Step-Selection Functions (SSFs) are commonly
used to link environmental covariates to animal location data collected at fine
temporal resolution. SSFs are estimated by comparing observed steps connecting
successive animal locations to random steps, using a likelihood equivalent of a
Cox proportional hazards model. By using common statistical distributions to
model step length and turn angle distributions, and including habitat- and
movement-related covariates (functions of distances between points, angular
deviations), it is possible to make inference regarding habitat selection and
movement processes, or to control one process while investigating the other.
The fitted model can also be used to estimate utilization distributions and
mechanistic home ranges. 3. Here, we present the R-package amt (animal movement
tools) that allows users to fit SSFs to data and to simulate space use of
animals from fitted models. The amt package also provides tools for managing
telemetry data. 4. Using fisher (Pekania pennanti ) data as a case study, we
illustrate a four-step approach to the analysis of animal movement data,
consisting of data management, exploratory data analysis, fitting of models,
and simulating from fitted models. |
1805.05597 | PanGeneHome : A Web Interface to Analyze Microbial Pangenomes | PanGeneHome is a web server dedicated to the analysis of available microbial
pangenomes. For any prokaryotic taxon with at least three sequenced genomes,
PanGeneHome provides (i) conservation level of genes, (ii) pangenome and
core-genome curves, estimated pangenome size and other metrics, (iii)
dendrograms based on gene content and average amino acid identity (AAI) for
these genomes, and (iv) functional categories and metabolic pathways
represented in the core, accessory and unique gene pools of the selected taxon.
In addition, the results for these different analyses can be compared for any
set of taxa. With the availability of 615 taxa, covering 182 species and 49
orders, PanGeneHome provides an easy way to get a glimpse on the pangenome of a
microbial group of interest. The server and its documentation are available at
http://pangenehome.lmge.uca.fr. |
1805.06214 | Response to Comment on "Cell nuclei have lower refractive index and mass
density than cytoplasm" | In a recent study entitled "Cell nuclei have lower refractive index and mass
density than cytoplasm", we provided strong evidence indicating that the
nuclear refractive index (RI) is lower than the RI of the cytoplasm for several
cell lines. In a complementary study in 2017, entitled "Is the nuclear
refractive index lower than cytoplasm? Validation of phase measurements and
implications for light scattering technologies", Steelman et al. observed a
lower nuclear RI also for other cell lines and ruled out methodological error
sources such as phase wrapping and scattering effects. Recently, Yurkin
composed a comment on these 2 publications, entitled "How a phase image of a
cell with nucleus refractive index smaller than that of the cytoplasm should
look like?", putting into question the methods used for measuring the cellular
and nuclear RI in the aforementioned publications by suggesting that a lower
nuclear RI would produce a characteristic dip in the measured phase profile in
situ. We point out the difficulty of identifying this dip in the presence of
other cell organelles, noise, or blurring due to the imaging point spread
function. Furthermore, we mitigate Yurkin's concerns regarding the ability of
the simple-transmission approximation to compare cellular and nuclear RI by
analyzing a set of phase images with a novel, scattering-based approach. We
conclude that the absence of a characteristic dip in the measured phase
profiles does not contradict the usage of the simple-transmission approximation
for the determination of the average cellular or nuclear RI. Our response can
be regarded as an addition to the response by Steelman, Eldridge and Wax. We
kindly ask the reader to attend to their thorough ascertainment prior to
reading our response. |
1805.06391 | Brain Age from the Electroencephalogram of Sleep | The human electroencephalogram (EEG) of sleep undergoes profound changes with
age. These changes can be conceptualized as "brain age", which can be compared
to an age norm to reflect the deviation from normal aging process. Here, we
develop an interpretable machine learning model to predict brain age based on
two large sleep EEG datasets: the Massachusetts General Hospital sleep lab
dataset (MGH, N = 2,621) covering age 18 to 80; and the Sleep Hearth Health
Study (SHHS, N = 3,520) covering age 40 to 80. The model obtains a mean
absolute deviation of 8.1 years between brain age and chronological age in the
healthy participants in the MGH dataset. As validation, we analyze a subset of
SHHS containing longitudinal EEGs 5 years apart, which shows a 5.5 years
difference in brain age. Participants with neurological and psychiatric
diseases, as well as diabetes and hypertension medications show an older brain
age compared to chronological age. The findings raise the prospect of using
sleep EEG as a biomarker for healthy brain aging. |
1805.06681 | Measuring and modeling interventions in aging | At the physiological level, aging is neither rigid nor unchangeable. Instead,
the molecular and mechanisms driving aging are sufficiently plastic that a
variety of diverse interventions--dietary, pharmaceutical, and genetic--have
been developed to radically manipulate aging. These interventions, shown to
increase the health and lifespan of laboratory animals, are now being explored
for therapeutic applications in humans.
This clinical potential makes it especially important to understand how,
quantitatively, aging is altered by lifespan-extending interventions. Do
interventions delay the onset of aging? Slow it down? Ameliorate only its
symptoms? Perhaps some interventions will alter only a subset of aging
mechanisms, leading to complex and unintuitive systemic outcomes. Statistical
and analytic models provide a crucial framework in which to interpret the
physiological responses to interventions in aging.
This review covers a range of quantitative models of lifespan data and places
them in the context of recent experimental work. The careful application of
these models can help experimentalists move beyond merely identifying
statistically significant differences in lifespan, to instead use lifespan data
as a versatile means for probing the underlying physiological dynamics of
aging. |
1805.09673 | Affinity Network Fusion and Semi-supervised Learning for Cancer Patient
Clustering | Defining subtypes of complex diseases such as cancer and stratifying patient
groups with the same disease but different subtypes for targeted treatments is
important for personalized and precision medicine. Approaches that incorporate
multi-omic data are more advantageous to those using only one data type for
patient clustering and disease subtype discovery. However, it is challenging to
integrate multi-omic data as they are heterogeneous and noisy. In this paper,
we present Affinity Network Fusion (ANF) to integrate multi-omic data for
patient clustering. ANF first constructs patient affinity networks for each
omic data type, and then calculates a fused network for spectral clustering. We
applied ANF to a processed harmonized cancer dataset downloaded from GDC data
portal consisting of 2193 patients, and generated promising results on
clustering patients into correct disease types. Moreover, we developed a
semi-supervised model combining ANF and neural network for few-shot learning.
In several cases, the model can achieve greater than 90% acccuracy on test set
with training less than 1% of the data. This demonstrates the power of ANF in
learning a good representation of patients, and shows the great potential of
semi-supervised learning in cancer patient clustering. |
1805.09884 | Ridge Regression Estimated Linear Probability Model Predictions of
O-glycosylation in Proteins with Structural and Sequence Data | The likelihood of O-GlcNAc glycosylation in human proteins is predicted using
the ridge regression estimated linear probability model (LPM). To achieve this,
sequences from three similar post-translational modifications (PTMs) of
proteins occurring at, or very near, the S or T site are analyzed:
N-glycosylation, O-mucin type (O-GalNAc) glycosylation, and phosphorylation.
Results found include: 1) The consensus composite sequon for O-glycosylation
does NOT have W on either side of the glycosylation site. 2) The same holds for
the consensus sequon for phosphorylation. 3) For LPM estimation, N-glycosylated
sequences are found to be good approximations to non-O-glycosylatable
sequences. 4) The selective positioning of an amino acid along the sequence,
differentiates the PTMs of proteins. 5) Some N-glycosylated sequences are also
phosphorylated at the S or T site. 6) ASA values for N-glycosylated sequences
are stochastically larger than those for O-GlcNAc glycosylated sequences. 7)
Structural attributes (beta turn II, II', helix, beta bridges, beta hairpin,
and the phi angle) are significant LPM predictors of O-GlcNAc glycosylation.
The LPM with sequence and structural data as explanatory variables yields a
Kolmogorov-Smirnov (KS) statistic value of 99%. 8) With only sequence data, the
KS statistic erodes to 80%, underscoring the germaneness of structural
information, which is sparse on O-glycosylated sequences. With 50% as the
cutoff probability for predicting O-GlcNAc glycosylation, this LPM mispredicts
21% of out-of-sample O-GlcNAc glycosylated sequences as not being glycosylated.
The 95% confidence interval around this mispredictions rate is 16% to 26% |
1805.12198 | Out-of-Sample Extrapolation with Neuron Editing | While neural networks can be trained to map from one specific dataset to
another, they usually do not learn a generalized transformation that can
extrapolate accurately outside the space of training. For instance, a
generative adversarial network (GAN) exclusively trained to transform images of
black-haired men to blond-haired men might not have the same effect on images
of black-haired women. This is because neural networks are good at generation
within the manifold of the data that they are trained on. However, generating
new samples outside of the manifold or extrapolating "out-of-sample" is a much
harder problem that has been less well studied. To address this, we introduce a
technique called neuron editing that learns how neurons encode an edit for a
particular transformation in a latent space. We use an autoencoder to decompose
the variation within the dataset into activations of different neurons and
generate transformed data by defining an editing transformation on those
neurons. By performing the transformation in a latent trained space, we encode
fairly complex and non-linear transformations to the data with much simpler
distribution shifts to the neuron's activations. We motivate our technique on
an image domain and then move to our two main biological applications: removal
of batch artifacts representing unwanted noise and modeling the effect of drug
treatments to predict synergy between drugs. |
1806.00646 | Osmosis through a Semi-permeable Membrane: a Consistent Approach to
Interactions | The movement of ionic solutions is an essential part of biology and
technology. Fluidics, from nano- to micro- to microfluidics, is a burgeoning
area of technology which is all about the movement of ionic solutions, on
various scales. Many cells, tissues, and organs of animals and plants depend on
osmosis, as the movement of fluids is called in biology. Indeed, the movement
of fluids through channel proteins (that have a hole down their middle) is
fluidics on an atomic scale. Ionic fluids are complex fluids, with energy
stored in many ways. Ionic fluids flow driven by gradients of concentration,
chemical and electrical potential, and hydrostatic pressure. Each flow is
classically described by its own field theory, independent of the others, but
of course, in reality every gradient drives every kind of flow to a varying
extent. Combining field equations is tricky and so the theory of complex fluids
derives the equations, rather than assumes their interactions. When field
equations are derived, rather than assumed, their variables are consistent.
That is to say all variables satisfy all equations under all conditions with
one set of parameters. Here we treat a classical osmotic cell in this spirit,
using a sharp interface method to derive boundary conditions consistent with
all flows and fields. We allow volume to change with concentration, since
changes of volume are a property of ionic solutions known to all who make them
in the laboratory. We consider flexible and inflexible membranes. We show how
to combine the energetics of the membrane with the energetics of the
surrounding complex fluids. The results seem general but need application to
specific situations of technological, biological and experimental importance
before the consequences of consistency can be understood. |
1806.03512 | Structural neuroimaging as clinical predictor: a review of machine
learning applications | In this paper, we provide an extensive overview of machine learning
techniques applied to structural magnetic resonance imaging (MRI) data to
obtain clinical classifiers. We specifically address practical problems
commonly encountered in the literature, with the aim of helping researchers
improve the application of these techniques in future works. Additionally, we
survey how these algorithms are applied to a wide range of diseases and
disorders (e.g. Alzheimer's disease (AD), Parkinson's disease (PD), autism,
multiple sclerosis, traumatic brain injury, etc.) in order to provide a
comprehensive view of the state of the art in different fields. |
1806.04736 | Key challenges facing data-driven multicellular systems biology | Increasingly sophisticated experiments, coupled with large-scale
computational models, have the potential to systematically test biological
hypotheses to drive our understanding of multicellular systems. In this short
review, we explore key challenges that must be overcome to achieve robust,
repeatable data-driven multicellular systems biology. If these challenges can
be solved, we can grow beyond the current state of isolated tools and datasets
to a community-driven ecosystem of interoperable data, software utilities, and
computational modeling platforms. Progress is within our grasp, but it will
take community (and financial) commitment. |
1806.08582 | Generalizing the first-difference correlated random walk for marine
animal movement data | Animal telemetry data are often analysed with discrete time movement models
assuming rotation in the movement. These models are defined with equidistant
distant time steps. However, telemetry data from marine animals are observed
irregularly. To account for irregular data, a time-irregularised
first-difference correlated random walk model with drift is introduced. The
model generalizes the commonly used first-difference correlated random walk
with regular time steps by allowing irregular time steps, including a drift
term, and by allowing different autocorrelation in the two coordinates. The
model is applied to data from a ringed seal collected through the Argos
satellite system, and is compared to related movement models through
simulations. Accounting for irregular data in the movement model results in
accurate parameter estimates and reconstruction of movement paths. Measured by
distance, the introduced model can provide more accurate movement paths than
the regular time counterpart. Extracting accurate movement paths from uncertain
telemetry data is important for evaluating space use patterns for marine
animals, which in turn is crucial for management. Further, handling irregular
data directly in the movement model allows efficient simultaneous analysis of
several animals. |
1806.08596 | Foreign Object Detection and Quantification of Fat Content Using A Novel
Multiplexing Electric Field Sensor | There is an ever growing need to ensure the quality of food and assess
specific quality parameters in all the links of the food chain, ranging from
processing, distribution and retail to preparing food. Various imaging and
sensing technologies, including X-ray imaging, ultrasound, and near infrared
reflectance spectroscopy have been applied to the problem. Cost and other
constraints restrict the application of some of these technologies. In this
study we test a novel Multiplexing Electric Field Sensor (MEFS), an approach
that allows for a completely non-invasive and non-destructive testing approach.
Our experiments demonstrate the reliable detection of certain foreign objects
and provide evidence that this sensor technology has the capability of
measuring fat content in minced meat. Given the fact that this technology can
already be deployed at very low cost, low maintenance and in various different
form factors, we conclude that this type of MEFS is an extremely promising
technology for addressing specific food quality issues. |
1806.09219 | Local migration quantification method for scratch assays | Motivation: The scratch assay is a standard experimental protocol used to
characterize cell migration. It can be used to identify genes that regulate
migration and evaluate the efficacy of potential drugs that inhibit cancer
invasion. In these experiments, a scratch is made on a cell monolayer and
recolonisation of the scratched region is imaged to quantify cell migration
rates. A drawback of this methodology is the lack of its reproducibility
resulting in irregular cell-free areas with crooked leading edges. Existing
quantification methods deal poorly with such resulting irregularities present
in the data. Results: We introduce a new quantification method that can analyse
low quality experimental data. By considering in-silico and in-vitro data, we
show that the method provides a more accurate statistical classification of the
migration rates than two established quantification methods. The application of
this method will enable the quantification of migration rates of scratch assay
data previously unsuitable for analysis. Availability and Implementation: The
source code and the implementation of the algorithm as a GUI along with an
example dataset and user instructions, are available in
https://bitbucket.org/anavictoria-ponce/local_migration_quantification_scratch_assays/src/master/.
The datasets are available in
https://ganymed.math.uni-heidelberg.de/~victoria/publications.shtml. |
1806.11369 | Develop machine learning based predictive models for engineering protein
solubility | Protein activity is a significant characteristic for recombinant proteins
which can be used as biocatalysts. High activity of proteins reduces the cost
of biocatalysts. A model that can predict protein activity from amino acid
sequence is highly desired, as it aids experimental improvement of proteins.
However, only limited data for protein activity are currently available, which
prevents the development of such models. Since protein activity and solubility
are correlated for some proteins, the publicly available solubility dataset may
be adopted to develop models that can predict protein solubility from sequence.
The models could serve as a tool to indirectly predict protein activity from
sequence. In literature, predicting protein solubility from sequence has been
intensively explored, but the predicted solubility represented in binary values
from all the developed models was not suitable for guiding experimental designs
to improve protein solubility. Here we propose new machine learning models for
improving protein solubility in vivo. We first implemented a novel approach
that predicted protein solubility in continuous numerical values instead of
binary ones. After combing it with various machine learning algorithms, we
achieved a prediction accuracy of 76.28 percent when Support Vector Machine
algorithm was used. Continuous values of solubility are more meaningful in
protein engineering, as they enable researchers to choose proteins with higher
predicted solubility for experimental validation, while binary values fail to
distinguish proteins with the same value. There are only two possible values so
many proteins have the same one. |
1807.00226 | Time-lagged Ordered Lasso for network inference | Accurate gene regulatory networks can be used to explain the emergence of
different phenotypes, disease mechanisms, and other biological functions. Many
methods have been proposed to infer networks from gene expression data but have
been hampered by problems such as low sample size, inaccurate constraints, and
incomplete characterizations of regulatory dynamics. Since expression
regulation is dynamic, time-course data can be used to infer causality, but
these datasets tend to be short or sparsely sampled. In addition, temporal
methods typically assume that the expression of a gene at a time point depends
on the expression of other genes at only the immediately preceding time point,
while other methods include additional time points without any constraints to
account for their temporal distance. These limitations can contribute to
inaccurate networks with many missing and anomalous links.
We adapted the time-lagged Ordered Lasso, a regularized regression method
with temporal monotonicity constraints, for \textit{de novo} reconstruction. We
also developed a semi-supervised method that embeds prior network information
into the Ordered Lasso to discover novel regulatory dependencies in existing
pathways. We evaluated these approaches on simulated data for a repressilator,
time-course data from past DREAM challenges, and a HeLa cell cycle dataset to
show that they can produce accurate networks subject to the dynamics and
assumptions of the time-lagged Ordered Lasso regression. |
1807.04325 | Agglomerative Hierarchical Clustering Analysis of co/multi-morbidities | Although co/multi-morbidities are associated with significant increase in
mortality, the lack of appropriate quantitative exploratory techniques often
impede their analysis. In the current study, we study the clustering of
multimorbid patients in the Texas patient population. To this end we employ
agglomerative hierarchical clustering to find clusters within the patient
population. The analysis revealed the presence of nine distinct, clinically
relevant clusters of co/multi-morbidities within the study population of
interest. This technique provides a quantitative exploratory analysis of the
co/multi-morbidities present in a specific population. |
1807.05189 | Nutrient removal from agricultural run-off in demonstrative full scale
tubular photobioreactors for microalgae growth | The objective of this paper is to present the design, construction and
operation of 3 full scale semi-closed, horizontal tubular photobioreactors
(PBR) used to remove nutrients of a mixture of agricultural run-off (90%) and
treated domestic wastewater (10%). The microalgal biomass produced in the PBRs
was harvested in a static lamella settling tank. Each PBR treated in average
2.3 m3/d. PBRs were submitted to strong seasonal changes regarding solar
radiation and temperature, which had a direct impact in the activity of
microalgae and the efficiency of the system. Higher mixed liquor pH values were
registered in summer (daily average> 10). Most of the influent and effluent
nitrogen content was inorganic (average of 9.0 mg N/L and 3.17 mg N/L,
respectively), and in the form of nitrate (62% and 50%, respectively). Average
nitrogen removal efficiency was 65%, with values of around 90% in summer, 80%
in autumn, 50 % in winter and 60% in spring. Most of the influent and effluent
phosphorus content was in the form of ortophosphate. Influent average was 0.62
mg P/L, but with great variations and in a considerable number of samples not
detected. Removal efficiency (when influent values were detected) was very high
during all the study, usually greater than 95%, and there were not clear
seasonal trends for efficiency as observed for TIN. Volumetric biomass
production greatly changed between seasons with much lower values in winter (7
g VSS/m3d) than in summer (43 g VSS/m3d). Biomass separation efficiency of the
settler was very good in either terms of turbidity and total suspended solids,
being most of the time lower than 5 UNT and 15 mg/L, respectively. Overall this
study demonstrated the reliable and good effectiveness of microalgae based
technologies such as the PBR to remove nutrients at a full scale size. |
1807.08039 | PGLasso: Microbial Community Detection through Phylogenetic Graphical
Lasso | Due to the recent advances in high-throughput sequencing technologies, it
becomes possible to directly analyze microbial communities in the human body
and in the environment. Knowledge of how microbes interact with each other and
form functional communities can provide a solid foundation to understand
microbiome related diseases; this can serve as a key step towards precision
medicine. In order to understand how microbes form communities, we propose a
two step approach: First, we infer the microbial co-occurrence network by
integrating a graph inference algorithm with phylogenetic information obtained
directly from metagenomic data. Next, we utilize a network-based community
detection algorithm to cluster microbes into functional groups where microbes
in each group are highly correlated. We also curate a "gold standard" network
based on the microbe-metabolic relationships which are extracted directly from
the metagenomic data. Utilizing community detection on the resulting microbial
metabolic pathway bipartite graph, the community membership for each microbe
can be viewed as the true label when evaluating against other existing methods.
Overall, our proposed framework Phylogenetic Graphical Lasso (PGLasso)
outperforms existing methods with gains larger than 100% in terms of Adjusted
Rand Index (ARI) which is commonly used to quantify the goodness of
clusterings. |
1807.08915 | Robust Retrospective Frequency and Phase Correction for Single-voxel MR
Spectroscopy | Purpose: subject motion and static field (B$_0$) drift are known to reduce
the quality of single voxel MR spectroscopy data due to incoherent averaging.
Retrospective correction has previously been shown to improve data quality by
adjusting the phase and frequency offset of each average to match a reference
spectrum. In this work, a new method (RATS) is developed to be tolerant to
large frequency shifts (greater than 7Hz) and baseline instability resulting
from inconsistent water suppression. Methods: in contrast to previous
approaches, the variable-projection method and baseline fitting is incorporated
into the correction procedure to improve robustness to fluctuating baseline
signals and optimization instability. RATS is compared to an alternative
method, based on time-domain spectral registration (TDSR), using simulated data
to model frequency, phase and baseline instability. In addition, a J-difference
edited glutathione in-vivo dataset is processed using both approaches and
compared. Results: RATS offers improved accuracy and stability for large
frequency shifts and unstable baselines. Reduced subtraction artifacts are
demonstrated for glutathione edited MRS when using RATS, compared with
uncorrected or TDSR corrected spectra. Conclusion: the RATS algorithm has been
shown to provide accurate retrospective correction of SVS MRS data in the
presence of large frequency shifts and baseline instability. The method is
rapid, generic and therefore readily incorporated into MRS processing pipelines
to improve lineshape, SNR and aid quality assessment. |
1807.09247 | Structural biology meets data science: Does anything change? | Data science has emerged from the proliferation of digital data, coupled with
advances in algorithms, software and hardware (e.g., GPU computing).
Innovations in structural biology have been driven by similar factors, spurring
us to ask: can these two fields impact one another in deep and hitherto
unforeseen ways? We posit that the answer is yes. New biological knowledge lies
in the relationships between sequence, structure, function and disease, all of
which play out on the stage of evolution, and data science enables us to
elucidate these relationships at scale. Here, we consider the above question
from the five key pillars of data science: acquisition, engineering, analytics,
visualization and policy, with an emphasis on machine learning as the premier
analytics approach. |
1807.09400 | Extreme value analysis of gut microbial alterations in colorectal cancer | Gut microbes play a key role in colorectal carcinogenesis, yet reaching a
consensus on microbial signatures remains a challenge. This is in part due to a
reliance on mean value estimates. We present an extreme value analysis for
overcoming these limitations. By characterizing a power law fit to the relative
abundances of microbes, we capture the same microbial signatures as more
complex meta-analyses. Importantly, we show that our method is robust to the
variations inherent in microbial community profiling and point to future
directions for developing sensitive, reliable analytical methods. |
1807.09728 | Adaptive, locally-linear models of complex dynamics | The dynamics of complex systems generally include high-dimensional,
non-stationary and non-linear behavior, all of which pose fundamental
challenges to quantitative understanding. To address these difficulties we
detail a new approach based on local linear models within windows determined
adaptively from the data. While the dynamics within each window are simple,
consisting of exponential decay, growth and oscillations, the collection of
local parameters across all windows provides a principled characterization of
the full time series. To explore the resulting model space, we develop a novel
likelihood-based hierarchical clustering and we examine the eigenvalues of the
linear dynamics. We demonstrate our analysis with the Lorenz system undergoing
stable spiral dynamics and in the standard chaotic regime. Applied to the
posture dynamics of the nematode $C. elegans$ our approach identifies
fine-grained behavioral states and model dynamics which fluctuate close to an
instability boundary, and we detail a bifurcation in a transition from forward
to backward crawling. Finally, we analyze whole-brain imaging in $C. elegans$
and show that the stability of global brain states changes with oxygen
concentration. |
1807.10180 | Global optimization using Gaussian Processes to estimate biological
parameters from image data | Parameter estimation is a major challenge in computational modeling of
biological processes. This is especially the case in image-based modeling where
the inherently quantitative output of the model is measured against image data,
which is typically noisy and non-quantitative. In addition, these models can
have a high computational cost, limiting the number of feasible simulations,
and therefore rendering most traditional parameter estimation methods
unsuitable. In this paper, we present a pipeline that uses Gaussian process
learning to estimate biological parameters from noisy, non-quantitative image
data when the model has a high computational cost. This approach is first
successfully tested on a parametric function with the goal of retrieving the
original parameters. We then apply it to estimating parameters in a biological
setting by fitting artificial in-situ hybridization (ISH) data of the
developing murine limb bud. We expect that this method will be of use in a
variety of modeling scenarios where quantitative data is missing and the use of
standard parameter estimation approaches in biological modeling is prohibited
by the computational cost of the model. |
1807.10509 | Converting Alzheimer s disease map into a heavyweight ontology: a formal
network to integrate data | Alzheimer s disease (AD) pathophysiology is still imperfectly understood and
current paradigms have not led to curative outcome. Omics technologies offer
great promises for improving our understanding and generating new hypotheses.
However, integration and interpretation of such data pose major challenges,
calling for adequate knowledge models. AlzPathway is a disease map that gives a
detailed and broad account of AD pathophysiology. However, AlzPathway lacks
formalism, which can lead to ambiguity and misinterpretation. Ontologies are an
adequate framework to overcome this limitation, through their axiomatic
definitions and logical reasoning properties. We introduce the AD Map Ontology
(ADMO) an ontological upper model based on systems biology terms. We then
propose to convert AlzPathway into an ontology and to integrate it into ADMO.
We demonstrate that it allows one to deal with issues related to redundancy,
naming, consistency, process classification and pathway relationships. Further,
it opens opportunities to expand the model using elements from other resources,
such as generic pathways from Reactome or clinical features contained in the
ADO (AD Ontology). A version of the ontology will be made freely available to
the community on Bioportal at the time of the confer-ence. |
1807.10595 | A Minimal Power Model for Human Running Performance | Models for human running performances of various complexities and underlying
principles have been proposed, often combining data from world record
performances and bio-energetic facts of human physiology. Here we present a
novel, minimal and universal model for human running performance that employs a
relative metabolic power scale. The main component is a self-consistency
relation for the time dependent maximal power output. The analytic approach
presented here is the first to derive the observed logarithmic scaling between
world (and other) record running speeds and times from basic principles of
metabolic power supply. Various female and male record performances (world,
national) and also personal best performances of individual runners for
distances from 800m to the marathon are excellently described by this model,
with mean errors of (often much) less than 1%. The model defines endurance in a
way that demonstrates symmetry between long and short racing events that are
separated by a characteristic time scale comparable to the time over which a
runner can sustain maximal oxygen uptake. As an application of our model, we
derive personalized characteristic race speeds for different durations and
distances. |
1807.11659 | Serverless computing provides on-demand high performance computing for
biomedical research | Cloud computing offers on-demand, scalable computing and storage, and has
become an essential resource for the analyses of big biomedical data. The usual
approach to cloud computing requires users to reserve and provision virtual
servers. An emerging alternative is to have the provider allocate machine
resources dynamically. This type of serverless computing has tremendous
potential for biomedical research in terms of ease-of-use, instantaneous
scalability and cost effectiveness. In our proof of concept example, we
demonstrate how serverless computing provides low cost access to hundreds of
CPUs, on demand, with little or no setup. In particular, we illustrate that the
all-against-all pairwise comparison among all unique human proteins can be
accomplished in approximately 2 minutes, at a cost of less than $1, using
Amazon Web Services Lambda. This is a 250x speedup compared to running the same
task on a typical laptop computer. |
1807.11862 | IGLOSS: iterative gapless local similarity search | Searching for local sequence patterns is one of the basic tasks in
bioinformatics. Sequence patterns might have structural, functional or some
other relevance, and numerous methods have been developed to detect and analyze
them. These methods often depend on the wealth of information already
collected. The explosion in the number of newly available sequences calls for
novel methods to explore local sequence similarity. We have developed a high
sensitivity web-based iterative local similarity scanner, that finds sequence
patterns similar to a submitted query. |
1808.01249 | Automated identification of flagella from videomicroscopy via the medial
axis transform | Ubiquitous in eukaryotic organisms, the flagellum is a well-studied organelle
that is well-known to be responsible for motility in a variety of organisms.
Commonly necessitated in their study is the capability to image and
subsequently track the movement of one or more flagella using videomicroscopy,
requiring digital isolation and location of the flagellum within a sequence of
frames. Such a process in general currently requires some researcher input,
providing some manual estimate or reliance on an experiment-specific heuristic
to correctly identify and track the motion of a flagellum. Here we present a
fully-automated method of flagellum identification from videomicroscopy based
on the fact that the flagella are of approximately constant width when viewed
by microscopy. We demonstrate the effectiveness of the algorithm by application
to captured videomicroscopy of Leishmania mexicana, a parasitic monoflagellate
of the family Trypanosomatidae. ImageJ Macros for flagellar identification are
provided, and high accuracy and remarkable throughput are achieved via this
unsupervised method, obtaining results comparable in quality to previous
studies of closely-related species but achieved without the need for precursory
measurements or the development of a specialised heuristic, enabling in general
the automated generation of digitised kinematic descriptions of flagellar
beating from videomicroscopy. |
1808.01755 | State-switching continuous-time correlated random walks | Continuous-time models have been developed to capture features of animal
movement across temporal scales. In particular, one popular model is the
continuous-time correlated random walk, in which the velocity of an animal is
formulated as an Ornstein-Uhlenbeck process, to capture the autocorrelation in
the speed and direction of its movement. In telemetry analyses, discrete-time
state-switching models (such as hidden Markov models) have been increasingly
popular to identify behavioural phases from animal tracking data. We propose a
multistate formulation of the continuous-time correlated random walk, with an
underlying Markov process used as a proxy for the animal's behavioural state
process. We present a Markov chain Monte Carlo algorithm to carry out Bayesian
inference for this multistate continuous-time model. Posterior samples of the
hidden state sequence, of the state transition rates, and of the
state-dependent movement parameters can be obtained. We investigate the
performance of the method in a simulation study, and we illustrate its use in a
case study of grey seal (Halichoerus grypus) tracking data. The method we
present makes use of the state-space model formulation of the continuous-time
correlated random walk, and can accommodate irregular sampling frequency and
measurement error. It will facilitate the use of continuous-time models to
estimate movement characteristics and infer behavioural states from animal
telemetry data. |
1808.01951 | A Review on Image- and Network-based Brain Data Analysis Techniques for
Alzheimer's Disease Diagnosis Reveals a Gap in Developing Predictive Methods
for Prognosis | Unveiling pathological brain changes associated with Alzheimer's disease (AD)
is a challenging task especially that people do not show symptoms of dementia
until it is late. Over the past years, neuroimaging techniques paved the way
for computer-based diagnosis and prognosis to facilitate the automation of
medical decision support and help clinicians identify cognitively intact
subjects that are at high-risk of developing AD. As a progressive
neurodegenerative disorder, researchers investigated how AD affects the brain
using different approaches: 1) image-based methods where mainly neuroimaging
modalities are used to provide early AD biomarkers, and 2) network-based
methods which focus on functional and structural brain connectivities to give
insights into how AD alters brain wiring. In this study, we reviewed
neuroimaging-based technical methods developed for AD and mild-cognitive
impairment (MCI) classification and prediction tasks, selected by screening all
MICCAI proceedings published between 2010 and 2016. We included papers that fit
into image-based or network-based categories. The majority of papers focused on
classifying MCI vs. AD brain states, which has enabled the discovery of
discriminative or altered brain regions and connections. However, very few
works aimed to predict MCI progression based on early neuroimaging-based
observations. Despite the high importance of reliably identifying which early
MCI patient will convert to AD, remain stable or reverse to normal over
months/years, predictive models are still lagging behind. |
1808.01971 | Volume tensor of pheasant brain compartments estimated by Fakir probe | The volume tensor provides robust estimate of object shape and orientation in
space. The tensor is estimated from 3D data set by the Fakir probe, an
interactive method using intersections of the objects boundary with a virtual
lines. The method thus can be applied to objects that cannot be segmented
automatically. Marking the intersections instead of segmenting the whole object
reduces the workload required for obtaining sufficiently precise results. We
present theoretical results on the variance of estimate of integrals by
systematic sampling that enable calculation of the shape estimate precision. To
demonstrate the ability of Fakir technique, we measure the changes in shape and
orientation of pheasant brain compartments during development. |
1808.03642 | Same but not alike: Structure, flexibility and energetics of domains in
multi-domain proteins are influenced by the presence of other domains | The majority of the proteins encoded in the genomes of eukaryotes contain
more than one domain. Reasons for high prevalence of multi-domain proteins in
various organisms have been attributed to higher stability and functional and
folding advantages over single-domain proteins. Despite these advantages, many
proteins are composed of only one domain while their homologous domains are
part of multi-domain proteins. In the study presented here, differences in the
properties of protein domains in single-domain and multi-domain systems and
their influence on functions are discussed. We studied 20 pairs of identical
protein domains, which were crystallized in two forms (a) tethered to other
proteins domains and (b) tethered to fewer protein domains than (a) or not
tethered to any protein domain. Results suggest that tethering of domains in
multi-domain proteins influences the structural, dynamic and energetic
properties of the constituent protein domains. 50% of the protein domain pairs
show significant structural deviations while 90% of the protein domain pairs
show differences in dynamics and 12% of the residues show differences in the
energetics. To gain further insights on the influence of tethering on the
function of the domains, 4 pairs of homologous protein domains, where one of
them is a full-length single-domain protein and the other protein domain is a
part of a multi-domain protein, were studied. Analyses showed that identical
and structurally equivalent functional residues show differential dynamics in
homologous protein domains, though comparable dynamics between in-silico
generated chimera protein and multi-domain proteins were observed. From these
observations, the differences observed in the functions of homologous proteins
could be attributed to the presence of tethered domain. Overall, we conclude
that tethered domains in multi-domain proteins not only provide stability or
folding advantages but also influence pathways resulting in differences in
function or regulatory properties. |
1808.03666 | Metrics for describing dyadic movement: a review | In movement ecology, the few works that have taken collective behaviour into
account are data-driven and rely on simplistic theoretical assumptions, relying
in metrics that may or may not be measuring what is intended. In the present
paper, we focus on pairwise joint-movement behaviour, where individuals move
together during at least a segment of their path. We investigate the adequacy
of twelve metrics introduced in previous works for assessing joint movement by
analysing their theoretical properties and confronting them with contrasting
case scenarios. Three criteria are taken into account for review of those
metrics: 1) practical use, 2) dependence on parameters and underlying
assumptions, and 3) computational cost. When analysing the similarities between
the metrics as defined, we show how some of them can be expressed using general
mathematical forms. In addition, we evaluate the ability of each metric to
assess specific aspects of joint-movement behaviour: proximity (closeness in
space-time) and coordination (synchrony) in direction and speed. We found that
some metrics are better suited to assess proximity and others are more
sensitive to coordination. To help readers choose metrics, we elaborate a
graphical representation of the metrics in the coordination and proximity space
based on our results, and give a few examples of proximity and coordination
focus in different movement studies. |
1808.03672 | RNAmountAlign: efficient software for local, global, semiglobal pairwise
and multiple RNA sequence/structure alignment | Alignment of structural RNAs is an important problem with a wide range of
applications. Since function is often determined by molecular structure, RNA
alignment programs should take into account both sequence and base-pairing
information for structural homology identi^Lcation. A number of successful
alignment programs are heuristic versions of Sanko^K's optimal algorithm. Most
of them require O(n4) run time. This paper describes C++ software,
RNAmountAlign, for RNA sequence/structure alignment that runs in O(n3) time and
O(n2) space; moreover, our software returns a p-value (transformable to expect
value E) based on Karlin-Altschul statistics for local alignment, as well as
parameter ^Ltting for local and global alignment. Using incremental mountain
height, a representation of structural information computable in cubic time,
RNAmountAlign implements quadratic time pairwise local, global and
global/semiglobal (query search) alignment using a weighted combination of
sequence and structural similarity. RNAmountAlign is capable of performing
progressive multiple alignment as well. Benchmarking of RNAmountAlign against
LocARNA, LARA, FOLDALIGN, DYNALIGN and STRAL shows that RNAmountAlign has
reasonably good accuracy and much faster run time supporting all alignment
types. |
1808.03745 | GL-BLSTM: a novel structure of bidirectional long-short term memory for
disulfide bonding state prediction | Background: Disulfide bonds are crucial to protein structural formation.
Developing an effective method topredict disulfide bonding formation is
important for protein structural modeling and functional study. Mostcurrent
methods still have shortcomings, including low accuracy and strict requirements
for the selection ofdiscriminative features. Results: In this study, we
introduced a nested structure of Bidirectional Long-short Term
Memory(BLSTM)neural network called Global-Local-BLSTM (GL-BLSTM) for disulfide
bonding state prediction. Based on thepatterns of disulfide bond formation, a
BLSTM network called Local-BLSTM is used to extract context-basedfeatures
around every Cys residue. Another BLSTM network called Global-BLSTM is
introduced aboveLocal-BLSTM layer to integrate context-based features of all
Cys residues in the same protein chain, therebyinvolving inter-residue
relationships in the training process. According to our experimental
results,GL-BLSTMnetwork performs much better than other methods, GL-BLSTM
reached 90.26% accuracy at residue-level and 83.66% at protein-level. This
model has reached the state of the art in this field. Conclusion: GL-BLSTMs
special structure and mechanisms are beneficial to disulfide bonding state
prediction.By applying bidirectional LSTM, it can extract context based
features by processing protein sequences, therebyobtain more discriminative
information than traditional machine learning methods. Whats more,
GL-BLSTMsspecial two-layer structure enables it to extract both local and
global features, in which global features areplaying important roles in
improving prediction accuracy, especially at protein-level. Keywords: Disulfide
bonds; Prediction; Deep learning; Bidirectional long short term memory |
1808.04075 | Random field theory-based p-values: A review of the SPM implementation | P-values and null-hypothesis significance testing are popular data-analytical
tools in functional neuroimaging. Sparked by the analysis of resting-state fMRI
data, there has been a resurgence of interest in the validity of some of the
p-values evaluated with the widely used software SPM in recent years. The
default parametric p-values reported in SPM are based on the application of
results from random field theory to statistical parametric maps, a framework
commonly referred to as RFT. While RFT was established two decades ago and has
since been applied in a plethora of fMRI studies, there does not exist a
unified documentation of the mathematical and computational underpinnings of
RFT as implemented in current versions of SPM. Here, we provide such a
documentation with the aim of contributing to contemporary efforts towards
higher levels of computational transparency in functional neuroimaging. |
1808.05581 | Information-theoretic analysis of multivariate single - cell signaling
responses using SLEMI | Mathematical methods of information theory constitute essential tools to
describe how stimuli are encoded in activities of signaling effectors.
Exploring the information-theoretic perspective, however, remains conceptually,
experimentally and computationally challenging. Specifically, existing
computational tools enable efficient analysis of relatively simple systems,
usually with one input and output only. Moreover, their robust and readily
applicable implementations are missing. Here, we propose a novel algorithm to
analyze signaling data within the framework of information theory. Our approach
enables robust as well as statistically and computationally efficient analysis
of signaling systems with high-dimensional outputs and a large number of input
values. Analysis of the NF-kB single - cell signaling responses to TNF-a
uniquely reveals that the NF-kB signaling dynamics improves discrimination of
high concentrations of TNF-a with a modest impact on discrimination of low
concentrations. Our readily applicable R-package, SLEMI - statistical learning
based estimation of mutual information, allows the approach to be used by
computational biologists with only elementary knowledge of information theory. |
1808.09499 | Tutorial on agent-based models in NetLogo applied to immunology and
virology | This tutorial introduces participants to the design and implementation of an
agent-based model using NetLogo through one of two different projects:
modelling T cell movement within a lymph node or modelling the progress of a
viral infection in an in vitro cell culture monolayer. Each project is broken
into a series of incremental steps of increasing complexity. Each step is
described in detail and the code to type in is initially provided. However,
each project has room to grow in complexity and biological realism so
participants are encouraged to expand their project beyond the scope of the
tutorial or to develop a project of their own. |
1808.10795 | Latent Space Temporal Model of Microbial Abundance to Predict Domination
and Bacteremia | Gut microbial composition has been linked to multiple health outcomes. Yet,
temporal analysis of this composition had been limited to deterministic models.
In this paper, we introduce a probabilistic model for the dynamics of
intestinal microbiomes that takes into account interaction among bacteria as
well as external effects such as antibiotics. The model successfully deals with
pragmatic issues such as random measurement error and varying time intervals
between measurements through latent space modeling. We demonstrate utility of
the model by using latent state features to predict the clinical events of
intestinal domination and bacteremia, improving accuracy over existing methods.
We further leverage this framework to validate known links between antibiotics
and clinical outcomes, while discovering new ones. |
1809.01708 | Statistical and mathematical modeling of spatiotemporal dynamics of stem
cells | Statistical and mathematical modeling are crucial to describe, interpret,
compare and predict the behavior of complex biological systems including the
organization of hematopoietic stem and progenitor cells in the bone marrow
environment. The current prominence of high-resolution and live-cell imaging
data provides an unprecedented opportunity to study the spatiotemporal dynamics
of these cells within their stem cell niche and learn more about aberrant, but
also unperturbed, normal hematopoiesis. However, this requires careful
quantitative statistical analysis of the spatial and temporal behavior of cells
and the interaction with their microenvironment. Moreover, such quantification
is a prerequisite for the construction of hypothesis-driven mathematical models
that can provide mechanistic explanations by generating spatiotemporal dynamics
that can be directly compared to experimental observations. Here, we provide a
brief overview of statistical methods in analyzing spatial distribution of
cells, cell motility, cell shapes and cellular genealogies. We also describe
cell- based modeling formalisms that allow researchers to simulate emergent
behavior in a multicellular system based on a set of hypothesized mechanisms.
Together, these methods provide a quantitative workflow for the analytic and
synthetic study of the spatiotemporal behavior of hematopoietic stem and
progenitor cells. |
1809.03587 | Near real-time enumeration of live and dead bacteria using a fibre-based
spectroscopic device | A rapid, cost-effective and easy method that allows on-site determination of
the concentration of live and dead bacterial cells using a fibre-based
spectroscopic device (the optrode system) is proposed and demonstrated.
Identification of live and dead bacteria was achieved by using the commercially
available dyes SYTO 9 and propidium iodide, and fluorescence spectra were
measured by the optrode. Three spectral processing methods were evaluated for
their effectiveness in predicting the original bacterial concentration in the
samples: principal components regression (PCR), partial least squares
regression (PLSR) and support vector regression (SVR). Without any sample
pre-concentration, PCR achieved the most reliable results. It was able to
quantify live bacteria from $10^{8}$ down to $10^{6.2}$ bacteria/mL and showed
the potential to detect as low as $10^{5.7}$ bacteria/mL. Meanwhile,
enumeration of dead bacteria using PCR was achieved between $10^{8}$ and
$10^{7}$ bacteria/mL. The general procedures described in this article can be
applied or modified for the enumeration of bacteria within populations stained
with fluorescent dyes. The optrode is a promising device for the enumeration of
live and dead bacterial populations particularly where rapid, on-site
measurement and analysis is required. |
1809.05969 | Missing Value Estimation Algorithms on Cluster and Representativeness
Preservation of Gene Expression Microarray Data | Missing values are largely inevitable in gene expression microarray studies.
Data sets often have significant omissions due to individuals dropping out of
experiments, errors in data collection, image corruptions, and so on. Missing
data could potentially undermine the validity of research results - leading to
inaccurate predictive models and misleading conclusions. Imputation - a
relatively flexible, general purpose approach towards dealing with missing data
- is now available in massive numbers, making it possible to handle missing
data. While these estimation methods are becoming increasingly more effective
in resolving the discrepancies between true and estimated values, its effect on
clustering outcomes is largely disregarded.
This study seeks to reveal the vast differences in agglomerative hierarchal
clustering outcomes estimation methods can construct in comparison to the
precision exhibited (presented through the cophenetic correlation coefficient)
in comparison to their high efficiency and effectivity in value preservation of
true and imputed values (presented through the root-mean-squared error). We
argue against the traditional approach towards the development of imputation
methods and instead, advocate towards methods that reproduce a data set's
original, natural cluster.
By using a number of advanced imputation methods, we reveal extensive
differences between original and reconstructed clusters that could
significantly transform the interpretations of the data as a whole. |
1809.07086 | Risk evaluation and behaviour: defining appropriate frames of reference | Many biological, psychological and economic experiments have been designed
where an organism or individual must choose between two options that have the
same expected reward but differ in the variance of reward received. In this
way, designed empirical approaches have been developed for evaluating risk
preferences. Here, however, we show that if the experimental subject is
inferring the reward distribution (to optimize some process), they will never
agree in finite time that the expected rewards are equal. In turn, we argue
that this makes discussions of risk preferences, and indeed the motivations of
behaviour, not so simple or straightforward to interpret. We use this
particular experiment to highlight the serious need to consider the frame of
reference of the experimental subject in studies of behaviour. |
1809.07308 | Ordinal Synchronization: Using ordinal patterns to capture
interdependencies between time series | We introduce Ordinal Synchronization ($OS$) as a new measure to quantify
synchronization between dynamical systems. $OS$ is calculated from the
extraction of the ordinal patterns related to two time series, their
transformation into $D$-dimensional ordinal vectors and the adequate
quantification of their alignment. $OS$ provides a fast and robust-to noise
tool to assess synchronization without any implicit assumption about the
distribution of data sets nor their dynamical properties, capturing in-phase
and anti-phase synchronization. Furthermore, varying the length of the ordinal
vectors required to compute $OS$ it is possible to detect synchronization at
different time scales. We test the performance of $OS$ with data sets coming
from unidirectionally coupled electronic Lorenz oscillators and brain imaging
datasets obtained from magnetoencephalographic recordings, comparing the
performance of $OS$ with other classical metrics that quantify synchronization
between dynamical systems. |
1809.08199 | Profiling lung cancer patients using electronic health records | If Electronic Health Records contain a large amount of information about the
patients condition and response to treatment, which can potentially
revolutionize the clinical practice, such information is seldom considered due
to the complexity of its extraction and analysis. We here report on a first
integration of an NLP framework for the analysis of clinical records of lung
cancer patients making use of a telephone assistance service of a major Spanish
hospital. We specifically show how some relevant data, about patient
demographics and health condition, can be extracted; and how some relevant
analyses can be performed, aimed at improving the usefulness of the service. We
thus demonstrate that the use of EHR texts, and their integration inside a data
analysis framework, is technically feasible and worth of further study. |
1809.08214 | RKappa: Software for Analyzing Rule-Based Models | RKappa is a framework for the development, simulation and analysis of
rule-base models within the mature statistically empowered R environment. It is
designed for model editing, parameter identification, simulation, sensitivity
analysis and visualisation. The framework is optimised for high-performance
computing platforms and facilitates analysis of large-scale systems biology
models where knowledge of exact mechanisms is limited and parameter values are
uncertain. The RKappa software is an open source (GLP3 license) package for R,
which is freely available online ( https://github.com/lptolik/R4Kappa ). |
1809.08321 | A Step-by-Step Guide to Using BioNetFit | BioNetFit is a software tool designed for solving parameter identification
problems that arise in the development of rule-based models. It solves these
problems through curve fitting (i.e., nonlinear regression). BioNetFit is
compatible with deterministic and stochastic simulators that accept BioNetGen
language (BNGL)-formatted files as inputs, such those available within the
BioNetGen framework. BioNetFit can be used on a laptop or standalone multicore
workstation as well as on many Linux clusters, such as those that use the Slurm
Workload Manager to schedule jobs. BioNetFit implements a metaheuristic
population-based global optimization procedure, an evolutionary algorithm (EA),
to minimize a user-defined objective function, such as a residual sum of
squares (RSS) function. BioNetFit also implements a bootstrapping procedure for
determining confidence intervals for parameter estimates. Here, we provide
step-by-step instructions for using BioNetFit to estimate the values of
parameters of a BNGL-encoded model and to define bootstrap confidence
intervals. The process entails the use of several plain-text files, which are
processed by BioNetFit and BioNetGen. In general, these files include 1) one or
more EXP files, which each contains (experimental) data to be used in parameter
identification/bootstrapping; 2) a BNGL file containing a model section, which
defines a (rule-based) model, and an actions section, which defines simulation
protocols that generate GDAT and/or SCAN files with model predictions
corresponding to the data in the EXP file(s); and 3) a CONF file that
configures the fitting/bootstrapping job and that defines algorithmic parameter
settings. |
1810.00499 | Spatial Stochastic Modeling with MCell and CellBlender | This chapter provides a brief introduction to the theory and practice of
spatial stochastic simulations. It begins with an overview of different methods
available for biochemical simulations highlighting their strengths and
limitations. Spatial stochastic modeling approaches are indicated when
diffusion is relatively slow and spatial inhomogeneities involve relatively
small numbers of particles. The popular software package MCell allows
particle-based stochastic simulations of biochemical systems in complex three
dimensional (3D) geometries, which are important for many cell biology
applications. Here, we provide an overview of the simulation algorithms used by
MCell and the underlying theory. We then give a tutorial on building and
simulating MCell models using the CellBlender graphical user interface, that is
built as a plug-in to Blender, a widely-used and freely available software
platform for 3D modeling. The tutorial starts with simple models that
demonstrate basic MCell functionality and then advances to a number of more
complex examples that demonstrate a range of features and provide examples of
important biophysical effects that require spatially-resolved stochastic
dynamics to capture. |
1810.01159 | A Highly Accurate Model Based Registration Method for FIB-SEM Images of
Neurons | Focused Ion Beam Scanning Electron Microscope (FIB-SEM) imaging is a
technique that image materials section-by-section at nano-resolution, e.g.,5
nanometer width voxels. FIB-SEM is well suited for imaging ultrastructures in
cells. Unfortunately, typical setups will introduce a slight sub-pixel
translation from section to section typically referred to as drift. Over
multiple sections, drift compound to skew distance measures and geometric
structures significantly from the pre-imaged stage. Popular correction
approaches often involve standard image registration methods available in
packages such as ImageJ or similar software. These methods transform the images
to maximize the similarity between consecutive two-dimensional sections under
some measure. We show how these standard approaches will both significantly
underestimate the drift, as well as producing biased corrections as they tend
to align the images such that the normal of planar biological structures are
perpendicular to the sectioning direction causing poor or incorrect correction
of the images. In this paper, we present a highly accurate correction method
for estimating drift in isotropic electron microscope images with visible
vesicles. |
1810.03766 | Reference environments: A universal tool for reproducibility in
computational biology | The drive for reproducibility in the computational sciences has provoked
discussion and effort across a broad range of perspectives: technological,
legislative/policy, education, and publishing. Discussion on these topics is
not new, but the need to adopt standards for reproducibility of claims made
based on computational results is now clear to researchers, publishers and
policymakers alike. Many technologies exist to support and promote reproduction
of computational results: containerisation tools like Docker, literate
programming approaches such as Sweave, knitr, iPython or cloud environments
like Amazon Web Services. But these technologies are tied to specific
programming languages (e.g. Sweave/knitr to R; iPython to Python) or to
platforms (e.g. Docker for 64-bit Linux environments only). To date, no single
approach is able to span the broad range of technologies and platforms
represented in computational biology and biotechnology.
To enable reproducibility across computational biology, we demonstrate an
approach and provide a set of tools that is suitable for all computational work
and is not tied to a particular programming language or platform. We present
published examples from a series of papers in different areas of computational
biology, spanning the major languages and technologies in the field
(Python/R/MATLAB/Fortran/C/Java). Our approach produces a transparent and
flexible process for replication and recomputation of results. Ultimately, its
most valuable aspect is the decoupling of methods in computational biology from
their implementation. Separating the 'how' (method) of a publication from the
'where' (implementation) promotes genuinely open science and benefits the
scientific community as a whole. |
1810.04269 | Scaling behavior in the heart rate variability characteristics with age | In this work we study the characteristics of the heart rate variability (HRV)
as a function of age and gender. The analyzed data include previous results
reported in the literature. The data obtained in this work expand the range of
age studied until now revealing new behaviors not reported before. We analyze
some measurements in the time domain,in the frequency domain and nonlinear
measurements. We report scaling behaviors and abrupt changes in some
measurements. There is also a progressive decrease in the dimensionality of the
dynamic system governing the HRV, with the increase in age that is interpreted
in terms ofautonomic regulation of cardiac activity. |
1810.08758 | Reconstructing 3D Motion Trajectory of Large Swarm of Flying Objects | This paper addresses the problem of reconstructing the motion trajectories of
the individuals in a large collection of flying objects using two temporally
synchronized and geometrically calibrated cameras. The 3D trajectory
reconstruction problem involves two challenging tasks - stereo matching and
temporal tracking. Existing methods separate the two and process them one at a
time sequentially, and suffer from frequent irresolvable ambiguities in stereo
matching and in tracking. We unify the two tasks, and propose an optimization
approach to solving stereo matching and temporal tracking simultaneously. It
treats 3D trajectory acquisition problem as selecting appropriate stereo
correspondence out of all possible ones for each object via minimizing a cost
function. Experiment results show that the proposed method offers significant
performance advantage over existing approaches. The proposed method has
successfully been applied to reconstruct 3D motion trajectories of hundreds of
simultaneously flying fruit flies (Drosophila Melanogaster), which could
facilitate the study the insect's collective behavior. |
1810.11432 | Coherent Control of Optogenetic Switching by Stimulated Depletion
Quenching | Optogenetics is a revolutionary new field of biotechnology, achieving optical
control over biological functions in living cells by genetically inserting
light sensitive proteins into cellular signaling pathways. Applications of
optogenetic switches are expanding rapidly, but the technique is hampered by
spectral cross-talk: the broad absorption spectra of compatible biochemical
chromophores limits the number of switches that can be independently controlled
and restricts the dynamic range of each switch. In the present work we develop
and implement a non-linear optical photoswitching capability, Stimulated
Depletion Quenching (SDQ), is used to overcome spectral cross-talk by
exploiting the molecules' unique dynamic response to ultrashort laser pulses.
SDQ is employed to enhance the control of Cph8, a photo-reversible phytochrome
based optogenetic switch designed to control gene expression in E. Coli
bacteria. The Cph8 switch can not be fully converted to it's biologically
inactive state ($P_{FR}$) by linear photos-witching, as spectral cross-talk
causes a reverse photoswitching reaction to revert to it back to the active
state ($P_{R}$). SDQ selectively halts this reverse reaction while allowing the
forward reaction to proceed. The results of this proof of concept experiment
lay the foundation for future experiments that will use optimal pulse shaping
to further enhance control of Cph8 and enable simultaneous, multiplexed control
of multiple optogenetic switches. |
1810.11435 | A stochastic modeling framework for single cell migration: coupling
contractility and focal adhesions | The interaction of the actin cytoskeleton with cell-substrate adhesions is
necessary for cell migration. While the trajectories of motile cells have a
stochastic character, investigations of cell motility mechanisms rarely
elaborate on the origins of the observed randomness. Here, guided by a few
fundamental attributes of cell motility, we construct a minimal stochastic cell
migration model from ground-up. The resulting model couples a deterministic
actomyosin contractility mechanism with stochastic cell-substrate adhesion
kinetics, and yields a well-defined piecewise deterministic process. Numerical
simulations reproduce several experimentally observed results, including
anomalous diffusion, tactic migration, and contact guidance. This work provides
a basis for the development of cell-cell collision and population migration
models. |
1810.11522 | Common lines modeling for reference free ab-initio reconstruction in
cryo-EM | We consider the problem of estimating an unbiased and reference-free ab-inito
model for non-symmetric molecules from images generated by single-particle
cryo-electron microscopy. The proposed algorithm finds the globally optimal
assignment of orientations that simultaneously respects all common lines
between all images. The contribution of each common line to the estimated
orientations is weighted according to a statistical model for common lines'
detection errors. The key property of the proposed algorithm is that it finds
the global optimum for the orientations given the common lines. In particular,
any local optima in the common lines energy landscape do not affect the
proposed algorithm. As a result, it is applicable to thousands of images at
once, very robust to noise, completely reference free, and not biased towards
any initial model. A byproduct of the algorithm is a set of measures that allow
to asses the reliability of the obtained ab-initio model. We demonstrate the
algorithm using class averages from two experimental data sets, resulting in
ab-initio models with resolutions of 20A or better, even from class averages
consisting of as few as three raw images per class. |
1811.00004 | Modelling N2O dynamics of activated sludge biomass under nitrifying and
denitrifying conditions: pathway contributions and uncertainty analysis | Nitrous oxide (N2O) is a potent greenhouse gas emitted during biological
wastewater treatment. A pseudo-mechanistic model describing three biological
pathways for nitric oxide (NO) and N2O production was calibrated for mixed
culture biomass from an activated sludge process using laboratory-scale
experiments. The model (NDHA) comprehensively describes N2O producing pathways
by both autotrophic ammonium oxidizing bacteria and heterotrophic bacteria.
Extant respirometric assays and anaerobic batch experiments were designed to
calibrate endogenous and exogenous processes (heterotrophic denitrification and
autotrophic ammonium/nitrite oxidation) together with the associated net N2O
production. Ten parameters describing heterotrophic processes and seven for
autotrophic processes were accurately estimated (variance/mean < 25%). The
model predicted NO and N2O dynamics at varying dissolved oxygen, ammonium and
nitrite levels and was validated against an independent set of experiments with
the same biomass. Aerobic ammonium oxidation experiments at two oxygen levels
used for model evaluation (2 and 0.5 mg/L) indicated that both the nitrifier
denitrification (42, 64%) and heterotrophic denitrification (7, 17%) pathways
increased and dominated N2O production at high nitrite and low oxygen
concentrations; while the nitrifier nitrification pathway showed the largest
contribution at high dissolved oxygen levels (51, 19%). The uncertainty of the
biological parameter estimates was propagated to N2O model outputs via Monte
Carlo simulations as 95% confidence intervals. The accuracy of the estimated
parameters resulted in a low uncertainty of the N2O emission factors (4.6 +-
0.6% and 1.2 +- 0.1%). |
1811.00324 | Application of laser biospeckle analysis for assessment of seed priming
techniques | Seed priming is one of the well-established and low cost method to improve
seed germination properties, productivity, and stress tolerance in different
crops. It is a pre-germination treatment that partially hydrates the seed and
allows controlled imbibition. This stimulates and induces initial germination
process, but prevents radicle emergence. Consequently, treated seeds are
fortified with enhanced germination characteristics, improved physiological
parameters, uniformity in growth, and improved capability to cope up with
different biotic and abiotic stresses. Existing techniques for evaluating the
effectiveness of seed priming suffer from several drawbacks, including very
high operating time, indirect and destructive analysis, bulky experimental
arrangement, high cost, and require extensive analytical expertise. To
circumvent these drawbacks, we propose a biospeckle based technique to analyse
the effects of different priming treatments on germination characteristics of
seeds. The study employs non-primed (T0) and priming treatments (T1-T75),
including hydropriming and chemical priming (using three chemical agents namely
sodium chloride, potassium nitrate, and urea) for different time durations and
solution concentrations. The results conclusively establish biospeckle analysis
as an efficient active tool for seed priming analysis. Furthermore, the
proposed setup is extremely simple, low-cost, involves non-mechanical scanning
and is highly stable. |
1811.00948 | Uniformisation techniques for stochastic simulation of chemical reaction
networks | This work considers the method of uniformisation for continuous-time Markov
chains in the context of chemical reaction networks. Previous work in the
literature has shown that uniformisation can be beneficial in the context of
time-inhomogeneous models, such as chemical reaction networks incorporating
extrinsic noise. This paper lays focus on the understanding of uniformisation
from the viewpoint of sample paths of chemical reaction networks. In
particular, an efficient pathwise stochastic simulation algorithm for
time-homogeneous models is presented which is complexity-wise equal to
Gillespie's direct method. This new approach therefore enlarges the class of
problems for which the uniformisation approach forms a computationally
attractive choice. Furthermore, as a new application of the uniformisation
method, we provide a novel variance reduction method for (raw) moment
estimators of chemical reaction networks based upon the combination of
stratification and uniformisation. |
1811.01373 | Segmentation of laterally symmetric overlapping objects: application to
images of collective animal behaviour | Video analysis is currently the main non-intrusive method for the study of
collective behavior. However, 3D-to-2D projection leads to overlapping of
observed objects. The situation is further complicated by the absence of stall
shapes for the majority of living objects. Fortunately, living objects often
possess a certain symmetry which was used as a basis for morphological
fingerprinting. This technique allowed us to record forms of symmetrical
objects in a pose-invariant way. When combined with image skeletonization, this
gives a robust, nonlinear, optimization-free, and fast method for detection of
overlapping objects, even without any rigid pattern. This novel method was
verified on fish (European bass, Dicentrarchus labrax, and tiger barbs, Puntius
tetrazona) swimming in a reasonably small tank, which forced them to exhibit a
large variety of shapes. Compared with manual detection, the correct number of
objects was determined for up to almost $90 \%$ of overlaps, and the mean
Dice-Sorensen coefficient was around $0.83$. This implies that this method is
feasible in real-life applications such as toxicity testing. |
1811.02335 | Objective estimation of sensory thresholds based on neurophysiological
parameters | Reliable determination of sensory thresholds is the holy grail of signal
detection theory. However, there exists no gold standard for the estimation of
thresholds based on neurophysiological parameters, although a reliable
estimation method is crucial for both scientific investigations and clinical
diagnosis. Whenever it is impossible to communicate with the subjects, as in
studies with animals or neonatales, thresholds have to be derived from neural
recordings. In such cases when the threshold is estimated based on neuronal
measures, the standard approach is still the subjective setting of the
threshold to the value where at least a "clear" neuronal signal is detectable.
These measures are highly subjective, strongly depend on the noise, and
fluctuate due to the low signal-to-noise ratio near the threshold. Here we show
a novel method to reliably estimate physiological thresholds based on
neurophysiological parameters. Using surrogate data, we demonstrate that
fitting the responses to different stimulus intensities with a hard sigmoid
function, in combination with subsampling, provides a robust threshold value as
well as an accurate uncertainty estimate. This method has no systematic
dependence on the noise and does not even require samples in the full dynamic
range of the sensory system. It is universally applicable to all types of
sensory systems, ranging from somatosensory stimulus processing in the cortex
to auditory processing in the brain stem. |
1811.03620 | Diffusion Kurtosis Imaging maps neural damage in the EAE model of
multiple sclerosis | Diffusion kurtosis imaging (DKI), is an imaging modality that yields novel
disease biomarkers and in combination with nervous tissue modeling, provides
access to microstructural parameters. Recently, DKI and subsequent estimation
of microstructural model parameters has been used for assessment of tissue
changes in neurodegenerative diseases and their animal models. In this study,
mouse spinal cords from the experimental autoimmune encephalomyelitis (EAE)
model of multiple sclerosis (MS) were investigated for the first time using DKI
in combination with biophysical modeling to study the relationship between
microstructural metrics and degree of animal dysfunction. Thirteen spinal cords
were extracted from animals of variable disability and scanned in a high-field
MRI scanner along with five control specimen. Diffusion weighted data were
acquired together with high resolution T2* images. Diffusion data were fit to
estimate diffusion and kurtosis tensors and white matter modeling parameters,
which were all used for subsequent statistical analysis using a linear mixed
effects model. T2* images were used to delineate focal
demyelination/inflammation. Our results unveil a strong relationship between
disability and measured microstructural parameters in normal appearing white
matter and gray matter. The changes we found in biophysical modeling parameters
and in particular in extra-axonal axial diffusivity were clearly different from
previous studies employing other animal models of MS. In conclusion, our data
suggest that DKI and microstructural modeling can provide a unique contrast
capable of detecting EAE-specific changes correlating with clinical disability.
These findings could close the gap between MRI findings and clinical
presentation in patients and deepen our understanding of EAE and the MS
mechanisms. |
1811.04355 | Harmonic holes as the submodules of brain network and network
dissimilarity | Persistent homology has been applied to brain network analysis for finding
the shape of brain networks across multiple thresholds. In the persistent
homology, the shape of networks is often quantified by the sequence of
$k$-dimensional holes and Betti numbers.The Betti numbers are more widely used
than holes themselves in topological brain network analysis. However, the holes
show the local connectivity of networks, and they can be very informative
features in analysis. In this study, we propose a new method of measuring
network differences based on the dissimilarity measure of harmonic holes (HHs).
The HHs, which represent the substructure of brain networks, are extracted by
the Hodge Laplacian of brain networks. We also find the most contributed HHs to
the network difference based on the HH dissimilarity. We applied our proposed
method to clustering the networks of 4 groups, normal control (NC), stable and
progressive mild cognitive impairment (sMCI and pMCI), and Alzheimer's disease
(AD). The results showed that the clustering performance of the proposed method
was better than that of network distances based on only the global change of
topology. |
1811.05088 | Suppression of the Spectral Cross Talk of Optogenetic Switching by
Stimulated Depletion Quenching. Theoretical Analysis | Optogenetics is a rapidly growing field of biotechnology, potentially
allowing a deeper understanding and control of complex biological networks. The
major challenge is the multiplexed control of several optogenetic components in
the presence of significant spectral cross talk. We propose and demonstrate
through simulations a new control approach of Stimulated Depletion Quenching.
This approach is applied to the phytochrome Cph8 bidirectional optogenetic
switch, and the results show significant improvement of its dynamic range. |
1811.07140 | Deep learning framework DNN with conditional WGAN for protein solubility
prediction | Protein solubility plays a critical role in improving production yield of
recombinant proteins in biocatalyst and pharmaceutical field. To some extent,
protein solubility can represent the function and activity of biocatalysts
which are mainly composed of recombinant proteins. Highly soluble proteins are
more effective in biocatalytic processes and can reduce the cost of
biocatalysts. Screening proteins by experiments in vivo is time-consuming and
expensive. In literature, large amounts of machine learning models have been
investigated, whereas parameters of those models are underdetermined with
insufficient data of protein solubility. A data augmentation algorithm that can
enlarge the dataset of protein solubility and improve the performance of
prediction model is highly desired, which can alleviate the common issue of
insufficient data in biotechnology applications for developing machine learning
models. We first implemented a novel approach that a data augmentation
algorithm, conditional WGAN was used to improve prediction performance of DNN
for protein solubility from protein sequence by generating artificial data.
After adding mimic data produced from conditional WGAN, the prediction
performance represented by $R^{2}$ was improved compared with the $R^{2}$
without data augmentation. After tuning the hyperparameters of two algorithms
and organizing the dataset, we achieved a $R^{2}$ value of $45.04\%$, which
enhanced $R^{2}$ about $10\%$ compared with the previous study using the same
dataset. Data augmentation opens the door to applications of machine learning
models on biological data, as machine learning models always fail to be well
trained by small datasets. |
1811.07560 | Reconstructing the visual perception of honey bees in complex 3-D worlds | Over the last decades, honeybees have been a fascinating model to study
insect navigation. While there is some controversy about the complexity of
underlying neural correlates, the research of honeybee navigation makes
progress through both the analysis of flight behavior and the synthesis of
agent models. Since visual cues are believed to play a crucial role for the
behavioral output of a navigating bee we have developed a realistic
3-dimensional virtual world, in which simulated agents can be tested, or in
which the visual input of experimentally traced animals can be reconstructed.
In this paper we present implementation details on how we reconstructed a large
3-dimensional world from aerial imagery of one of our field sites, how the
distribution of ommatidia and their view geometry was modeled, and how the
system samples from the scene to obtain realistic bee views. This system is
made available as an open-source project to the community on
\url{http://github.com/bioroboticslab/bee_view}. |
1811.08866 | Multi-level Approximate Bayesian Computation | Approximate Bayesian Computation is widely used to infer the parameters of
discrete-state continuous-time Markov networks. In this work, we focus on
models that are governed by the Chemical Master Equation (the CME). Whilst
originally designed to model biochemical reactions, CME-based models are now
frequently used to describe a wide range of biological phenomena
mathematically. We describe and implement an efficient multi-level ABC method
for investigating model parameters. In short, we generate sample paths of
CME-based models with varying time resolutions. We start by generating
low-resolution sample paths, which require only limited computational resources
to construct. Those sample paths that compare well with experimental data are
selected, and the temporal resolutions of the chosen sample paths are
recursively increased. Those sample paths unlikely to aid in parameter
inference are discarded at an early stage, leading to an optimal use of
computational resources. The efficacy of the multi-level ABC is demonstrated
through two case studies. |
1811.09115 | Quantification of sulfated polysaccharides in urine by the Heparin Red
mix-and-read fluorescence assay | Quantification of sulfated polysaccharides in urine samples is relevant to
pharmacokinetic studies in drug development projects and to the non-invasive
diagnosis and therapy monitoring of mucopolysaccharidoses. The Heparin Red Kit
is a particularly simple and user friendly fluorescence assay for the
quantification of sulfated polysaccharides and has recently emerged as a novel
tool for the monitoring of their blood levels during pharmacokinetic studies in
clinical trials. The standard protocol for the blood plasma matrix is, however,
not suited for urine samples due to matrix interference. The present study
identifies inorganic sulfate as the interfering component in urine. The sulfate
level of urine is typically 1-2 orders of magnitude higher compared with the
blood plasma level. Addition of either hydrochloric acid or magnesium chloride
counteracts sulfate interference but still enables sensitive detection of
sulfated polysaccharides such as heparin, heparan sulfate and dermatan sulfate
at low microgramm per milliliter levels. This study extends the application
range of the Heparin Red Kit by a simple modification of the assay protocol to
the direct quantification of various sulfated polysaccharides in human urine. |
1811.11846 | Fast Proteome Identification and Quantification from Data-Dependent
Acquisition - Tandem Mass Spectrometry using Free Software Tools | Identification of nearly all proteins in a system using data-dependent
acquisition (DDA) mass spectrometry has become routine for simple organisms,
such as bacteria and yeast. Still, quantification of the identified proteins
may be a complex process and require multiple different software packages. This
protocol describes identification and label-free quantification of proteins
from bottom-up proteomics experiments. This method can be used to quantify all
the detectable proteins in any DDA dataset collected with high-resolution
precursor scans. This protocol may be used to quantify proteome remodeling in
response to a drug treatment or a gene knockout. Notably, the method uses the
latest and fastest freely-available software, and the entire protocol can be
completed in a few hours with data from organisms with relatively small
genomes, such as yeast or bacteria. |