Datasets:

xjLee

/

english_test_01

like 0

Introduce Front cup holder.

Press the side of the front cup holder cover that is closest to the light strip. The cover will slowly open to reveal the cup holder.

Introduce Rear cup holder.

To use, first pull down the rear seat armrest. Press the cup holder cover to pop it out. Before returning the rear seat armrest to its original position, ensure the cup holder is completely empty. Then press the cup holder cover to return it to its original position.

How to use Trunk cover?

Use the trunk cover to cover luggage to protect your privacy and shield it from sunlight. To use, pull out the shelf and hang it into the fixing slots on both sides.

How to remove the trunk cover?

Press on one end of the trunk cover to release it from the fixing slots.

How many Power sockets do we have in the car?

We have these kind of power sockets: USB type-C power supply USB type-A power supply Backup power supply Digital video recorder power supply

Where is the USB type-C power supply?

1.In the left-side compartment of the auxiliary instrument panel.This power supply may be used when the power mode is ON. This power supply may be used to charge electronic devices such as mobile phones and tablet computers. 2.At the air outlet of the rear air conditioner.This power supply may be used when the power mode is ON. This power supply may be used to charge electronic devices such as mobile phones and tablet computers.

Where is the USB type-A power supply?

1.In the right-side compartment of the auxiliary instrument panel.This power supply may be used when the power mode is ON. This power supply may be used to charge electronic devices such as mobile phones and tablet computers. 2.At the air outlet of the rear air conditioner.This power supply may be used when the power mode is ON. This power supply may be used to charge electronic devices such as mobile phones and tablet computers.

Where is the Backup power supply?

1.In the auxiliary instrument panel compartment.To use this power supply when the power mode is ON, open the cover. This power supply can provide 12 V DC power for accessories with a rated power less than or equal to 120 W (10 A). 2.On the side panel of the luggage space.To use this power supply when the power mode is ON, open the cover. This power supply can provide 12 V DC power for accessories with a rated power less than or equal to 120 W (10 A).

Where is the Digital video recorder power supply?

The digital video recorder power supply is near the interior rearview mirror as shown in the diagram. This power supply is designed to provide 5 V DC power supply for a digital video recorder with a rated power less than or equal to 10 W.

What should I notice before driving?

Clear away all debris on the vehicle such as snow and leaves before driving. Regularly checking the tyres, engine oil, lights and exterior before driving ensures that you can operate the vehicle safely. If you think that your vehicle is in need of repair, contact a Authorized dealer promptly. Ensure that the doors and bonnet are closed.

What should I Know about Storing things in car?

Do not place anything on the instrument panel. Objects placed here will impede the driver’s view and have a negative impact on driving the vehicle and may cause an accident. Do not place anything around the driver’s feet. Objects placed here may get stuck on a pedal and cause the driver to lose control over the vehicle, resulting in an accident. If you need to use a floor mat, make sure that it is suitable for your vehicle. If it has the wrong shape or is installed incorrectly, it will affect the operation of the pedals, which may prevent the vehicle from starting, make shifting difficult or impossible, or cause an accident in another way. Do not place anything under the seats. Placing objects under a seat may prevent it from being properly positioned or locked in place, which can result in an accident. Do not put additional padding over the seat backs. This could impair the driver’s posture and limit the protection provided by the seat belts and head restraints in the event of an accident, resulting in a life-threatening injury. Do not attach anything to the windows using suction cups. Suction cups can act as a lens that may cause a fire in the vehicle.

What should I be careful about while driving?

Do not drive the vehicle over the speed limit indicated. Overloading the vehicle is very dangerous.Do not transport more passengers than stipulated and do not carry cargo that weighs more than the vehicle is rated for. Do not allow passengers to ride in the luggage space or in the boot. Driving after consuming alcohol is very dangerous. Even a small amount of alcohol can impair the driver’s judgement, vision and attention and can cause a major accident. Making or receiving calls diverts the driver’s attention and can cause an accident.When the driver needs to use a mobile device, first park the vehicle in a safe location. Driving when tired is very dangerous. Fatigue greatly impairs the driver’s judgement, vision and attention and can cause a major accident. Switching the vehicle off while driving turns off the power brakes and power steering system, resulting in poor braking performance and increasing the risk of an accident. Holding the steering wheel at full lock for a long time may make the power steering system less efficient and damage the system in severe cases. Do not keep your foot on the brake or the parking brake on while driving. This may wear the brake pads faster than normal or overheat the brakes, which will affect braking performance and may cause an accident. Disc brakes will produce a warning sound during braking when they are nearing the time to be replaced. If you hear a humming sound while braking, do not continue driving. Continuing to drive would severely wear the brake discs and damage brake components, affecting braking performance and possibly causing an accident. Do not continue driving if a tyre has blown. Continuing to drive with a burst tyre is very dangerous and may cause an accident. It also damages the tyres, wheel, suspension and body. The tyre must be replaced immediately. If the vehicle’s underside, tyre or wheel experiences a strong impact, quickly stop the vehicle in a safe location and check the vehicle. Check whether any brake fluid or petrol is leaking. Check whether the suspension, tyres, wheels or drivetrain components have been damaged or deformed. If you find a leak or damage, continuing to drive may cause an accident. When going downhill,do not turn the vehicle off or shift to neutral. When stopping the vehicle on a verge or a road with an elevated surface, ensure that the verge or another obstacle does not compress and deform the tyre. When braking, accelerating or turning the steering wheel in an emergency on a slippery road, the tyres may slip sideways, causing the vehicle to lose control and resulting in an accident. Drive cautiously through water.Driving through water may short-circuit or damage electrical components or cause a major accident.

What should I pay attention to when transporting passengers?

Do not move around inside the vehicle. Do not put body parts outside the windows or sunroof. Do not hold a child on your lap. Do not allow children to open vehicle doors, windows or the sunroof.

What should I be care for with Parking the vehicle?

Do not drive or stop on roads with a lot of flammable materials such as grass or scrap paper. Wood or plywood placed too close behind the vehicle may cause a fire. Do not run the vehicle for a long time in a poorly ventilated area such as a garage. This may cause exhaust gas to accumulate, which may lead to carbon monoxide poisoning, causing serious personal injury and even death.

What do you know about Economy driving?

Predictive driving Keep the correct distance from the vehicle ahead to avoid unnecessary acceleration and braking. Driving at a stable speed improves the vehicle’s range. Avoid unnecessary loads Carrying loads or overloading the vehicle increases power consumption. Remove unnecessary items from the vehicle before driving. Perform scheduled maintenance Performing scheduled maintenance ensures a longer life for your vehicle and optimum efficiency. Turn off unnecessary electronic equipment Turn off functions such as the air-conditioning, seat warming and rear window heating to reduce power use. Close the windows and sunroof Opening vehicle windows or the sunroof increases drag. Therefore, keep them closed when possible to reduce power consumption. Use inertia to coast When approaching a red light or driving downhill, take your foot off the accelerator pedal to allow the vehicle to use its inertia to coast.

How to Driving in fog?

You should turn on the fog lights when driving in fog. When you hear another vehicle sound its horn, you should immediately sound your vehicle’s horn to indicate your position. You should try to drive at a lower speed in fog and maintain a safe distance from the vehicle in front of you. Because the interior and exterior temperatures are significantly different, often a thin layer of fog forms on the interior of the windscreen, affecting the driver’s field of vision. By using the defrost function of the air-conditioner or by slightly opening a window to balance the interior temperature with the temperature outside, you can avoid having this layer of fog form on the inside of the windscreen. If you would like to wipe off the fog on the windscreen, first park the car and then wipe the window.

What should I notice while Driving in the rain?

Poor visibility, a fogged windscreen and slippery roads often occur while driving in the rain. Drive with caution. When performing emergency braking, steering and accelerating on a slippery road, tyres may slip, making it difficult to control the vehicle, which may lead to an accident. A film of water is likely to form between tyres and the ground when driving in the rain, causing tyres to lose traction. Please drive more slowly. WARNING: Avoid driving in heavy rain.

How to Driving through water?

Precautions when driving through water Before driving through water, make sure you know how deep it is. If the water is or may be deep, you cannot drive through it; you must go around. Analyse the road conditions and do not drive into an unfamiliar area. There may be hidden obstacles like ditches or manholes that are not visible. Drive slowly when passing through water (do not exceed 10 kph). Do not stop and do not change gears. When driving through an intersection, avoid allowing any wave made by the vehicle in front of yours to cover the front grille of your vehicle. If your vehicle shuts off when driving through water, do not try to restart it. This would severely damage your engine. Contact a Authorized dealer as soon as possible to tow the vehicle to a dry location. Inspection and care after driving through water Promptly do the following after safely driving through water: Step on the brake pedal lightly several times and check whether all brake functions are working. Test the horn. Test all the vehicle’s lights. Take the vehicle to a Authorized dealer as soon as possible for a regular inspection. When the vehicle drives through water, water may enter the internal parts of the gearbox system and dilute the grease, which may cause a system failure. CAUTION: Only drive through water in an emergency. Do not do so regularly. Driving through water may damage the engine and electrical components.

What should I be careful with Driving in hot weather?

The high temperatures during hot weather are not conducive to the normal operation of the vehicle or the driver’s health. For the sake of safety, the driver should note the following: The engine is more likely to overheat in hot weather. Therefore, pay special attention to inspecting and maintaining the engine cooling system, and remove debris caught in the radiator as soon as possible. The higher temperatures during hot weather cause higher air pressure in tyres and a corresponding increase in the likelihood of a tyre blowout. In the event of a tyre blowout while driving, hold the steering wheel firmly, step on the brake pedal lightly to slow down, and avoid emergency braking or sudden turning of the steering wheel. Otherwise, you may lose control over the vehicle. Higher temperatures and more intense sun in hot weather may cause heat stroke. Keep the cabin well ventilated and do not drive while tired.

What should I be careful with Driving in cold weather?

Characteristics of standard tyres (such as width, composition and tread) reduce their elasticity when the temperature is low. This reduces traction and braking and increases noise from the tyres. Permanent damage to tyres, such as cracking and abnormal wear, may result in extreme cases. Use winter tyres when the temperature is below 7°C Winter tyres can greatly improve handling stability and braking responsiveness and shorten the braking distance. The use of tyre chains is regulated by the standards of each country or region. Put on tyre chains in accordance with local regulations. Only fit tyre chains to the drive wheels and do not fit them to just one wheel. Follow the instructions provided by the manufacturer when fitting the chains and ensure that they are attached snugly.

What should I notice about new Tyres?

Be especially careful for the first 500 km when using new tyres. New tyres have a lower adhesive strength and need to be run in.

What do you know about new Brake pads?

New brake pads need to be used for 400 km of driving before reaching their optimal braking performance. New brake pads need to be worn in to maximise their frictional force. However, pressing harder on the brake pedal compensates for the lower brake force. Avoid additional loads on the brakes during the run-in period. This includes emergency braking, especially when the vehicle is moving at a high speed, and emergency braking when driving on a slope.

How to drive safely to protect the engine?

To extend the service life of the engine, a new engine or an overhauled engine should be run in before normal use by gradually increasing the load. We recommend noting the following: First 300 km: Avoid emergency braking. First 1,000 km: Avoid driving the vehicle at high speeds. Do not press the accelerator pedal all the way down to avoid running the engine at a high speed. Do not drive at the same speed for an extended time. Regularly change speeds and gears. Do not drive in a high gear at a low speed or low gear at a high speed. Use a gear that is appropriate for the driving conditions. Do not tow a trailer or other vehicle. From 1,000 to 1,500 km: You may safely increase your driving speed. CAUTION: While running in, pay attention to how each system of the engine is functioning. If there is a failure or other issue, it should be resolved before continuing the run in.

How many ways are there to start the engine?

The engine in this vehicle can be started in the following two ways: 1.With the front electric drive motor. The front electric drive motor is the equipment of first resort for starting the vehicle's engine. It can be used both when the vehicle is stationary and in motion. The advantages of starting the engine with the front electric drive motor include fast drive-off, low noise and low vibration. This means more comfort for the driver during engine startup. 2.With a conventional starter motor. The starter motor is used when the vehicle is stationary and at a fairly low temperature, or when the high-voltage system is unable to start the engine. However, if the vehicle is in motion, the starter motor will not be used to start the engine.

How does the Hybrid system work When stopping/driving off?

When the vehicle stops, the engine typically shuts off. When you start driving off, typically the electric drive motor propels the vehicle. When driving at low speed or going down a gentle incline, the engine typically shuts off and the electric drive motor propels the vehicle.

How does the Hybrid system work During normal driving?

The vehicle's overall control system will automatically select pure electric drive, combination drive or engine direct drive, depending on the driver's chosen drive mode and driving intention. Typically, when the vehicle is fully charged, the electric drive motor will be the method of first resort for propelling the vehicle.

How does the Hybrid system work During sudden acceleration?

Stepping hard on the accelerator pedal when the vehicle is moving relatively slowly, the engine drives the generator to generate electricity, and the electric drive motor propels the vehicle. Stepping hard on the accelerator pedal when the vehicle is in combination drive mode, the engine and the electric drive motor together propel the car.

How does the Hybrid system work When braking (energy recovery)?

When driving at a certain speed in D gear, releasing the accelerator pedal or depressing the brake pedal converts kinetic energy into electrical energy and causes the electric motor to charge the powertrain battery while slowing down.

What is Energy recovery?

The main purpose of this function is to convert part of the kinetic energy from braking or coasting into electric energy for the powertrain battery. This extends the vehicle's range. You can set the level of energy recovery by going to 【vehicle settings】 → 【driving】 → 【energy recovery level】 on the multimedia display. WARNING: The decrease in vehicle speed caused by energy recovery cannot take the place of normal braking. To decelerate and stop the vehicle, you must step on the brake pedal. NOTICE: When the energy recovery function is activated and causing an obvious decrease in vehicle speed, the brake light might come on. NOTICE: Energy recovery will not take place in the following situations: When the vehicle is in N gear. When the powertrain battery is full. When the powertrain battery temperature is overly high or overly low.

Where is the High-voltage power-down switch?

The high-voltage power-down switch is located near the battery. To find the switch, lift the cover panel in the luggage area, then remove the toolkit tray and insulating mat. Before operating the switch, put the voltage source in the OFF mode.

How to operate the High-voltage power-down switch?

1.Pull up on the clip to release the connector lock. 2.To break the circuit, push the connector lock in and lift it up until you see the lock hole. 3.Insert a padlock into the lock hole to lock the connector and prevent accidental injury due to misuse.

Where is the Emergency cut-off point?

A low-voltage wire harness cut-off point has been set up in case a collision seriously misshapes the luggage area and makes it impossible to operate the battery safety switch. The emergency cut-off point is located in the engine bay. Open the engine bay cover to find it.

Introduce Power battery recycling.

When you need to replace or dispose of the power battery, contact a Authorized dealer about recycling requirements. Inappropriate disposal of the power battery pollutes the environment and may cause an accident.

What's Power mode?

When the smart key is available, press the power switch to turn the power on/off. OFF: The electrical components are in a non-working state. ON: All electrical components can be used.

How to start the vehicle normally?

1.Carry your intelligent key with you. 2.Adjust the seat position so that you have the correct posture while driving. 3.Ensure that the parking brake is applied. 4.Ensure that you are in P or N gear. 5.Press the brake pedal. 6.Press the power switch to start the vehicle. (On the combined instrument panel, the light will illuminate, which means that the drivetrain is ready.)

what's emergency startign?

If the vehicle asks “Is the key in the vehicle?” (e.g. if the intelligent key has lost power or there is severe damage to the door guard or rear bumper), place the key above the unlock symbol in the hollow under the auxiliary instrument panel to start the vehicle. If the vehicle will not start, contact a Authorized dealer as soon as possible.

How to turn off the vehicle normally?

1.When the vehicle has come to a complete stop, press the P button to shift into P gear. 2.Press the power button to turn off the vehicle.

What is Emergency power off?

If the vehicle is moving (speed greater than 5 kph) and there is an emergency, e.g. the vehicle cannot be stopped normally, the following operations can shut the vehicle off: Long press of the power switch. Press the power supply three times within the space of two seconds.

Give me some Safety information about parking brake.

Stopping the vehicle on a steep slope increases the risk of an accident. Drive safely and avoid such risky stops. The handbrake is not capable of completely preventing the vehicle from rolling on very steep slopes, so put your foot on the brake pedal as well to prevent the vehicle from rolling.

How to engage the parking brake?

When stopped, the vehicle will automatically engage the electric parking brake (EPB) after the power is switched OFF. The parking brake informational light on the combined instrument panel will light up. If you do not need to engage the parking brake, simply hold down the EPB switch while switching the power OFF. To engage the parking brake, pull up on the EPB switch after the vehicle comes to a stop. The parking brake informational light on the combined instrument panel will light up.

How can I do an Emergency braking?

In an emergency, pull up on the EPB switch and hold it up to use the EPB system to brake the vehicle. To cancel emergency braking, simply let go of the EPB switch or put your foot on the accelerator pedal.

How to Release the parking brake?

With the power switched ON, put your foot on the brake pedal and press down on the EPB switch to release the parking brake. The parking brake informational light on the combined instrument panel will go out.

What's the Automatic vehicle hold?

When the vehicle is on a slope, at a red light or in stop-and-go traffic, automatic vehicle hold (AVH) frees the driver from having to keep the brake pedal pushed down for an extended period of time or having to engage the electric parking brake frequently. This makes driving more comfortable for the driver and lowers the risk of the vehicle rolling. To turn automatic vehicle hold on or off, close the driver’s door, fasten the driver’s seat belt, start the vehicle, and then press the AVH switch.

What's Automatic drive-off?

With the parking brake applied, when the driver fastens their seat belt and puts their foot on the accelerator pedal and the system detects the driver’s intention to drive off, the parking brake will release automatically. Greater drive traction will be required on a slope to prevent the vehicle from rolling backwards.

Tell me about Gear shifting.

Park (P) P is used for parking. In P gear, the gearbox is mechanically locked to prevent the car from rolling. Reverse (R) R is used to drive in reverse. Neutral (N) In N gear, the vehicle does not transmit any power from the engine. WARNING: When stopping the vehicle in N gear, you must engage the handbrake or press the brake pedal. Otherwise, the vehicle may roll and cause an accident. Do not coast in neutral because this may cause an accident. Auto mode (D) We recommend using D gear for normal driving. When using the engine to drive the vehicle, the gearbox automatically adjusts to the appropriate gear according to the vehicle speed and the acceleration needed to achieve optimal power and economy. Manual (M) When accelerating to overtake or driving up- or downhill, we recommend using M gear. We recommend using a lower gear in M gear when on a bumpy road or ramp. NOTICE: Using manual mode automatically activates the engine to drive the vehicle. When driving mode is in 【EV】 mode, using M automatically switches the driving mode to 【SPORT】 mode. When using M in other driving modes, there will be no change to the driving mode.

How to shift gears?

You can shift gears as normal after starting the vehicle. Before driving off, keep your foot on the brake pedal. Otherwise, the vehicle will move on its own when it is in a driving gear position. To exit P gear or switch to R or D gear, put your foot on the brake pedal and move the gear lever. After switching to D gear, switch to M gear by moving the gear lever backwards. Move the lever again to switch to D gear. To switch from D or M gear to the N position, simply move the gear lever forwards one position. To switch from R gear to the N position, simply move the gear lever backwards one position.

Tell me about Switching gears when in manual mode.

The gear-shifting tabs allow you to shift up or down without taking your hands off the steering wheel. When driving in manual mode (M gear), you can shift up or down manually by pushing the gear-shifting tabs on the steering wheel. When driving in automatic mode (D gear), you can activate manual mode temporarily by pushing the gear-shifting tabs on the steering wheel. You can then shift up or down manually by pushing the gear-shifting tabs again. If you do not use the gear-shifting tabs again within a certain period of time, the vehicle will return to automatic mode.

What is Crawl function?

After starting the vehicle, switch to the driving gear, release the handbrake and take your foot off the brake pedal. The vehicle will crawl forward slowly without needing the driver to press the accelerator pedal.

How to Start off the car?

1.Fasten your seat belt and ensure that the parking brake is engaged. 2.Start the vehicle. 3.Put your foot on the brake and shift into D gear (in situations where greater torque is required, such as on hills, we suggest starting off in M gear). 4.Take your foot off the brake and press the accelerator pedal lightly to accelerate the vehicle.

How to do a Launch starting?

1.Close the vehicle doors, fasten your seat belt and ensure that the parking brake is engaged. 2.Start the vehicle. 3.Switch the drive mode to 【SPORT】 and ensure that the electronic stability program is off. 4.Put your foot on the brake, shift into D or M gear and release the handbrake. 5.Put your foot on the accelerator pedal. The instrument panel will show “Launch control activated”. Take your foot off the brake, and the vehicle will set off.

Tell me about Stopping the car.

1.Ease off the accelerator pedal and press the brake. 2.Once the vehicle comes to a stop, select the P gear. 3.Engage the handbrake and switch the power to OFF. 4.Take your foot off the brake.

How to switch modes?

You can switch driving modes by going to 【vehicle settings】 → 【driving】 → 【driving mode】 on the multimedia display. 【NORMAL】 : automatically selects the best driving mode based on current driving conditions, overall vehicle dynamics and economic performance 【EV】 : uses the electric motor to propel and drive the vehicle. Suitable for city streets. Saves energy and reduces emissions 【CHARGE】 : With this mode selected, the SOC value in the current mode can be set to keep the power battery power within the set limit. Use this setting before driving into urban or congested areas for better fuel economy and to ensure that the vehicle has sufficient electric range for driving in urban or congested areas. 【SPORT】 : increases vehicle dynamics, offering an enhanced driving experience. Suitable for flat road surfaces, light traffic and plenty of room to manoeuvre. 【SNOW】 : Suitable for hard but slick surfaces, including snow, ice, grass and gravel. 【AWD】 : Evenly distributes driving power to the front and rear axles and automatically adjusts the driving mode to fit current driving conditions. Suitable for unpaved road surfaces with poor traction. 【MUD】 : Suitable for bumpy, muddy roads; roads covered in a smooth, shallow layer of mud; and rutty roads. 【SAND】 : Suitable for regions bordering desert areas with surfaces of dry, hard-packed sand.

Got any information about trailers?

Because countries' regulations on trailer towing and trailer hitches differ, consult a Authorized dealer before driving with a trailer. CAUTION: Improper towing of a trailer can result in loss of control over the vehicle, which can easily cause an accident and injury. Obey relevant local laws and regulations when towing a trailer. Never make modifications to trailer equipment on your own. Only use undamaged trailer equipment that has been installed according to regulations. Do not make modifications or repairs of any kind to trailer equipment. When not towing a trailer, be sure to disconnect the trailer power harness, turn off trailer mode and retract the trailer hook. The outside rearview mirrors of the vehicle should be in compliance with the regulations of the country where the vehicle is located. If they are not in compliance, install appropriate trailer rearview mirrors. NOTICE: Do not tow a trailer during the vehicle run-in period. The vehicle's electronics can be damaged if the trailer consumes more power than the battery load.

Where is the Trailer equipment?

Trailer equipment should be installed at the ends of the left and right side members of the vehicle.

How can I switch steering assistance modes?

You can switch steering assistance modes by going to 【vehicle settings】 → 【driving】 → 【power assisted steering mode】 on the multimedia display. 【Light】 : more steering assistance for easier steering; suitable for driving in heavy traffic such as in urban areas 【Comfort】 : suitable for typical driving habits 【Sport】 : less steering assistance and more steering feedback; recommended for use in high-speed, rainy or snowy conditions

What's Vehicle sound prompt system

When the vehicle is moving at low speeds for the purpose of increasing safety, the vehicle sound prompt system produces an acoustic signal to make pedestrians and other vehicles aware of your vehicle.

How to use Vehicle sound prompt system?

To set the warning sound, including 【technology】 and 【intangible】 , go to 【system settings】 → 【sound】 → 【sound effect settings】 → 【pedestrian warning sound】 on the multimedia display. When the vehicle enters electric driving mode, the system will emit a warning sound if the following conditions are met: When the vehicle is moving forward at 30 kph or less. When the vehicle is reversing.

What's 360 panoramic view imaging of the Parking assist system?

360 panoramic view imaging uses four cameras to capture images of the vehicle's surroundings and then sends these image signals to the display. This helps the driver operate the vehicle safely and in a relaxed manner and avoid collisions.

How to use 360 panoramic view imaging?

Use the following method to turn on or off 360 panoramic view: Touch the 360 button on the multimedia display to turn on 360 panoramic view imaging. 360 panoramic view imaging will automatically turn on when you put the vehicle in R gear. 360 panoramic view imaging will automatically turn off when you put the vehicle in P gear. 360 panoramic view imaging will automatically turn off when the vehicle is moving faster than the set speed. The apparent exit speed can be set by going to 【vehicle settings】 → 【parking】 → 【exit 360° camera speed】 on the multimedia display.

How to switch perspectives in 360 panoramic view imaging?

Automatic perspective switching: When you put the vehicle in D gear, the perspective automatically switches to forward-looking. When you put the vehicle in R gear, it automatically switches to rear-looking. In D gear, when you turn on your an indicator, the imaged area automatically switches to the front wheel image. Manual perspective switching: When the vehicle is moving forward at less than 10 kph, you can manually switch perspectives. In 2D view mode, touch and area around the vehicle in the top view to switch to the perspective image corresponding to this area. In 3D view mode, touch the top view area to display the orientation button in the top view. Touch a position button, and the image area will show the imaging perspective corresponding to that button.

What is Collision-avoidance radar?

The collision-avoidance radar is a radar detection device. During parking, the system uses sensors to detect whether there are obstacles in front of and behind the vehicle and the distance to the obstacles. It then gives the driver an audio warning to help the driver park safely and easily. Instructions for use: The collision-avoidance radar turns on or off at the same time as 360 panoramic view imaging.

Tell me about Intelligent integrated parking system.

The intelligent integrated parking system uses the 360 panoramic view imaging system and the collision-avoidance radar system. The radar sensors and cameras detect obstructions surrounding the vehicle and parking space lines to identify where the vehicle should park. The system then automatically controls the vehicle's steering, shifting and braking. To move the vehicle into and out of a parking space, all the driver needs to do is follow the system's prompts. If the system detects any pedestrians, vehicles or other moving obstructions during the parking process and there is the risk of a collision, it will automatically apply emergency braking and quickly stop the vehicle. If the system detects any fixed obstructions and there is a risk of a collision, it will apply moderate braking to bring the vehicle to smooth, steady stop.

How to use the Intelligent integrated parking system?

After starting the vehicle, touch the 【intelligent parking】 button on the 360 panoramic view imaging page to activate the intelligent integrated parking system. With the system activated, you can park simply by following the prompts on the multimedia display. CAUTION: To ensure safe parking, constantly monitor the vehicle's surroundings so you can promptly brake and take control over the vehicle when there is a risk of a collision. NOTICE: You can have the system move the vehicle out of a parking space only when the vehicle is stationary. When looking for a parking space, make sure there will be an appropriate distance (about 0.5 to 1.5 metres) between your vehicle and the next vehicle or any obstruction on each side. Otherwise the system may not be able to identify the parking space.

What is Reversing tracking?

When the vehicle is moving in D gear at 30 kph or slower, the system records in real time the last 50 metres of forward travel. When reversing tracking is activated, the system controls the steering wheel, braking and vehicle speed to automatically reverse over the recorded route. If the system detects any pedestrians, vehicles or other non-fixed obstructions during the reversing and there is a risk of a collision, it will automatically apply emergency braking and quickly stop the vehicle.

How to use Reversing tracking?

After starting the vehicle, touch the 【Reversing Tracking】 button on the interface for 360 panoramic view imaging. The reversing tracking function will activate. With reversing tracking activated, you can complete automatic reversing simply by following the prompts on the multimedia display. CAUTION: To ensure safe parking, constantly monitor the vehicle's surroundings so you can promptly brake and take control over the vehicle when there is a risk of a collision.

Where is Parking settings?

You can set parking assist functions by going to 【vehicle settings】 → 【parking】 . The specific settings may differ from vehicle to vehicle.

What are the settings options in the parking settings?

【Auto turn on front radar】 : enables or disables auto turn on front radar When this function is enabled, the front radar and imaging system will turn on automatically if the vehicle is moving forward at less than 10 kph and the system detects an obstacle within its detection zone. The system will turn off automatically if the distance to the obstacle remains unchanged for several seconds, if the obstacle moves away from the vehicle or if the vehicle's parking brake is applied. 【MEB】 : enables or disables low-speed emergency braking If the low-speed emergency braking light on the imaging interface is lit and is green, it means the function is working normally. In this state, if the system detects an obstacle and determines that there is a risk of a collision, it will automatically apply emergency braking to lower the collision risk. The informational light will then turn red. CAUTION: This function is only intended to assist the driver. There is no guarantee that it will detect all obstacles in all situations. Turn off low-speed emergency braking in complex road conditions (such as in off-road conditions or on narrow paths). Otherwise the system may brake unnecessarily. Turn off low-speed emergency braking if the vehicle has towing equipment installed or is towing another vehicle. Otherwise the system may brake unnecessarily. 【SDW flank protection】 : enables or disables flank protection When this function is enabled and the sensors on either side of the vehicle detects an obstacle, the system will use a visual and acoustic warning to alert the driver to use caution in parking. 【Auto turn on steering】 : enables or disables auto turn on steering When this function is enabled and the vehicle is in D gear, 360 panoramic view imaging will turn on automatically when you turn on an indicator or turn the steering wheel a certain degree. 360 panoramic view imaging will turn off automatically when the steering wheel returns to its original position and the indicator stops, or when the vehicle exceeds the set speed. 【Exit 360° camera speed】 : sets the vehicle speed that triggers the system to exit 360 panoramic view 360 panoramic view imaging will automatically turn off when the vehicle is moving faster than the set speed. 【Road calibration】 : calibrates the 360° panoramic view monitor In the course of vehicle use, vehicle loading and jolting, ageing of parts and other factors can cause the positions of the vehicle's cameras to shift. This can result in image stitching errors, blurriness and distortions. When this happens, you can use the road calibration function to optimise the image stitching. For the specific way to calibrate and calibration requirements, see the messages and information on the multimedia display. 【Reset factory calibration】 : resets the system to its factory settings 【360° camera】 : switches to the interface for 360 panoramic view imaging

Tell me about Tyre pressure monitoring system.

The TPMS can monitor tyre pressure and temperature in real time and in the event of tyre abnormalities, quickly alert the driver to take corresponding measures to avoid accidents.

What functions does the Tyre pressure monitoring system have?

On the steering wheel, press the home button on the steering wheel switches the instrument to the driving data interface. Press the up or down selector buttons on the driving data interface to switch the driving data interface to the tyre pressure monitoring interface and to display the real-time pressure and temperature information of all four tyres. If a tyre’s pressure is low or temperature is too high, the abnormal tyre icon on the tyre pressure monitoring interface will flash in red.

Under what circumstances will the Tyre pressure monitoring system give me a warning?

If the tyre pressure is low or the tyre’s temperature is too high, the instrument panel will provide the following warning: The information centre displays an alarm window, the affected tyre displays in red, and an audible alarm sounds. On the instrument panel, the tyre pressure monitoring system warning light illuminates. If there is a warning about one of the tyres, avoid emergency turning or braking. Reduce your speed, pull off at a safe location, park the vehicle as soon as possible, and contact a Authorized dealer for assistance.

What's Intelligent monitoring system?

This system uses a camera to gather driver-related information so as to provide services including distraction monitoring, fatigue monitoring, dangerous behaviour monitoring and identity recognition.

How to use Intelligent monitoring system?

You can turn these functions on or off by going to 【vehicle settings】 → 【in-car】 → 【intelligent camera】 on the multimedia display.

What's Distraction monitoring?

When this function is on, the system will issue a verbal instruction when it detects that the driver is distracted while driving. At the same time, the instrument panel will display the alarm interface. If the driver continues to drive while distracted, the system will change the verbal instruction automatically depending on how distracted the driver is.

What is Fatigue monitoring?

When this function is on, the system will issue an acoustic alert or spoken instruction when it detects that the driver is fatigued while driving, depending on how fatigued the driver is. At the same time, the instrument panel will display the alarm interface. If the system issues a verbal instruction, it means the driver’s fatigue is significantly affecting safety. Take the system’s suggestion or stop at a safe place to rest as soon as possible. The system automatically turns on the air-conditioning when it detects that the driver is fatigued. The air conditioner temperature will decrease and the wind speed will increase as the driver becomes more fatigued.

What's Dangerous behaviour monitoring?

When this function is on, the system will issue a verbal instruction when it detects dangerous driver behaviour during driving.

What's Cruise control assist system?

When driving on a straight motorway where traffic is flowing well, the cruise control assist system keeps the vehicle at a set speed without the driver having to press the accelerator pedal. If the system detects that a vehicle in front of your vehicle is moving at a speed slower than your set cruise speed, the system will adjust to allow your vehicle to follow the vehicle ahead at a preset, safe distance. To use other smart cruise assistance functions, go to 【vehicle settings】 → 【intelligent driving】 → 【smart cruise】 on the multimedia display on some vehicles equipped with smart cruise assist functions.

How to Activate cruise control?

While driving, move the control lever in the direction close to steering wheel until it moves to the position 【CRUISE】 and then release it to activate the cruise control function. The minimum speed of the cruise control system is 30 kph. Toggle once to activate the adaptive cruise control function, and the instrument will simultaneously provide prompt information. Toggle two times in a row to activate the intelligent cruise control function, and the instrument panel will simultaneously issue a prompt.

How to do the Cruise control speed adjustments?

Move the control lever up or down to the 【+】 or 【-】 positions to slightly increase or decrease the cruising speed. Move the control lever up or down to the 【+】 or 【-】 positions and hold to continuously increase or decrease the cruising speed. Release the cruise control lever when the desired speed is reached.

How to Cancel cruise control?

There are two ways to cancel cruise control: 1.Press the brake pedal. 2.Move the control lever away from the steering wheel to the 【CANCEL】 position.

How to Adjust the distance between vehicles?

Toggle the distance control rod to adjust the distance. The distance is not a fixed distance, but the distance to follow the vehicle in front. For a given distance, the following distance will vary with vehicle speed.

What do you know about Adaptive cruise control?

This function allows your vehicle to follow another vehicle moving at 0 to 150 kph. In heavy traffic, this function will slow your vehicle down to the speed of the vehicle ahead or stop your vehicle when the vehicle ahead stops. Also, If the vehicle ahead moves off again within 30 seconds, your vehicle will follow. If the vehicle ahead remains stationary for longer (30 seconds to 3 minutes), tap the accelerator pedal to restart the system. If the vehicle ahead remains stationary for longer than 3 minutes, your vehicle will automatically engage the parking brake. If the driver opens the door or takes off his or her seat belt, the vehicle will automatically engage the parking brake.

What is Cornering assist?

After turning on cruise control assist, the cornering assist system will slow the vehicle down if it detects that the vehicle has begun a turn at too high a speed.

Tell me about Lane centring assist while cruising?

Only the intelligent cruise assist mode has this function. When the system is working and the sensor detects the lane boundary or a moving vehicle ahead, the system helps the driver keep the vehicle centred between the lane marks.

What is the Function limits of The cruise control assist system?

The cruise control assist system may not apply the brakes in the following situations: If another vehicle suddenly pulls out in front of this vehicle. If a vehicle ahead is moving slowly and this vehicle is moving faster than 60 kph. If there is an oncoming vehicle in the same lane. If a vehicle or object crosses the lane ahead. For a pedestrian, animal or small vehicle (such as a bicycle or motorcycle). If another vehicle in front of this vehicle slows down suddenly. If water, snow or mud has splashed onto the sensor, impairing its ability to function. If the front of the vehicle is raised due to the luggage space being overloaded. When cornering or driving on a narrow road. If the rear of the vehicle ahead is small or is raised very high off the ground. When use of the steering wheel or your position in your lane is erratic.

What sensors does The cruise control assist system use?

The cruise control assist system uses a camera in the upper part of the windscreen and a radar in the middle of the front bumper to identify lane boundaries and detect targets.

Tell me about The forward assist system.

The forward assist system uses a camera on the windscreen and radar sensors in the front bumper to detect vehicles on the road. When the system detects the risk of a frontal crash, it will issue an alarm or intervene to lower the risk of a crash. Select and set the various functions by going to 【vehicle settings】 → 【intelligent driving】 → 【front assist】 on the multimedia display.

Tell me about Pedestrian/pre-collision assist.

PCW: detects pedestrians and cyclists Pre-collision assist: detects most stationary vehicles and vehicles moving in the same direction as your vehicle (e.g. passenger cars, lorries, buses etc.) Off: turns off the function Brake: turns on brake assist Brake&Steering: turns on brake assist and steering assist together Brake assist: When vehicle speed is above 30 kph, if the system detects a pedestrian or vehicle and determines that there is a risk of a crash, it will issue an alarm to alert the driver to drive safely. There are two alarm levels: an acoustic alarm (advance warning) and short brake alarms (emergency warning). In an emergency, the system will take control over the vehicle and automatically apply emergency braking (limited braking) if the driver does not respond by braking. In addition, the left and right indicators will flash quickly to alert the vehicle behind and lower the risk of a crash. Cornering assist When the system detects a pedestrian or vehicle and determines that there is the risk of a crash, the system will help the driver steer to avoid the obstacle and lower the risk of a crash if the system detects that the driver’s steering (turns the steering wheel) is insufficient to avoid the risk.

What is Crossing assist?

When vehicle speed is below 20 kph and the vehicle is making a turn at a road junction, the system will apply the brakes if the system detects a vehicle or pedestrian coming from across the junction and determines that there is a risk of a crash. The system is able to detect pedestrians and vehicles (e.g. passenger cars, lorries, buses etc.) moving in the opposite direction to your vehicle. Poor lighting will affect the detection range. Turn on the headlights when driving at night.

What is Front Cross Traffic Alert/Braking?

When the vehicle is driving off from a road junction and going straight (for example, at a traffic light), the system will respond with an alarm or by braking if it detects a vehicle coming from the right or left and determines that there is a risk of a crash. Front cross traffic alert: When the vehicle is starting off at 0 to 10 kph, if it detects there is a risk of a crash, it will issue an alert. Front cross traffic brake: When the vehicle is starting off at 0 to 5 kph, if it detects there is a risk of a crash, it will apply braking. The system is able to detect vehicles (e.g., passenger cars, lorries and buses) moving in a transverse direction to your vehicle at 10 to 60 kph. Poor lighting will affect the detection range. Turn on the headlights when driving at night.

What is Front pre-collision detection sensitivity?

This function has three levels of sensitivity. Low: the distance when an alarm sounds will be shorter Standard: the distance when an alarm sounds will be the one defined by the system High: the distance when an alarm sounds will be longer

Tell me about Side rear assist.

The side rear assist system uses sensors at the two ends of the rear bumper to detect the presence of vehicles behind or in adjacent lanes. If there is a risk of a crash, the system will sound an alarm to alert the driver to drive safely. Select and set the various intelligent driving functions by going to 【vehicle settings】 → 【intelligent driving】 → 【rear assist】 on the multimedia display.

What's Alarm light?

The alarm light is located on the left and right outside rearview mirrors. WARNING: To allow the system’s alarm function to work normally, do not stick anything over the alarm light.

What's Blind spot monitoring?

If the vehicle is moving (at over 12 kph) and the system detects a vehicle in the blind spot of one of this vehicle's outside rearview mirrors, or detects a fast-approaching vehicle in an adjacent lane, the alarm light on that side will light up. If you put on that side’s indicator at this moment, the alarm light will flash and will be accompanied by an acoustic warning to alert you of the danger of continuing to change lanes.

What do you know about Door open warning?

If the vehicle comes to a stop and the system detects an approaching vehicle, bicycle or other target in either adjacent lane and determines that there is a risk of a crash if the doors are opened, the alarm light on that side will light up. If a passenger continues to open a door on that side, the alarm light will flash and will be accompanied by an acoustic warning to alert you of the danger of continuing to open the door.

Do you know about Rear collision warning?

When the system detects a fast-approaching vehicle behind this vehicle and determines that there is a risk of a crash, the left and right indicators will flash quickly. This will be accompanied by an acoustic warning and a message on the instrument panel. This is to alert the driver that a dangerous target is approaching as well as to warn the vehicle behind to drive safely.

What is Rear Cross Traffic Alert/Braking?

With rear cross traffic alert turned on, the system will issue an alarm to alert the driver to drive safely if it detects there is a risk of colliding with a moving vehicle in the blind spot of one of the outside rearview mirrors during reversing. With RCTB turned on, applying a limited amount of braking force when there are risks while reversing lowers the risk of a collision.

What's Lane assist?

The lane assist system is designed for use when the vehicle is driving on motorways and other roads that are in good condition. By using a camera on the windscreen to detect lane dividers, it alerts the driver to make a correction when the driver accidentally deviates from the lane. Some of the system’s functions even assist the driver in correcting their direction to reduce the risk of a collision. Select and set the various intelligent driving functions by going to 【vehicle settings】 → 【intelligent driving】 → 【lane assist】 on the multimedia display.

What functions does lane assist have?

After turning on the lane assist function, you can choose the type of assist. Lane keeping assist: helps the driver correct the steering wheel angle to keep the vehicle in the lane if the driver accidentally drifts out of the lane. If the correction fails, the system will issue an alarm to alert the driver to drive safely. Lane departure warning: issues an alarm when the driver accidentally drifts out of the lane to alert the driver to drive safely Lane centring assist: helps the driver correct the angle of the steering wheel to keep the vehicle in the centre of the lane. If the correction fails and the vehicle deviates from the current lane, the system will issue an alarm to alert the driver to drive safely.

What is Emergency lane keeping?

When emergency lane keeping is turned on, the system will more aggressively correct the steering wheel in an emergency to lower the risk of a crash. For example, the system will do this if the driver accidentally deviates from the lane or indicates to change lanes when there is a risk of hitting a vehicle in the adjacent lane coming from the opposite direction or from behind in the same direction, or when the current lane is adjacent to a hard shoulder.

What is Smart dodge?

When smart dodge is turned on and the lane centring assist function or the smart cruise assist mode is on and working, and the system detects that the vehicle is about to pass a large vehicle (such as a van, lorry, or bus) in an adjacent lane, it will put more space between this vehicle and that large vehicle while passing. After passing the large vehicle, this vehicle will return to the centre of its lane.