Datasets:

ramixpe
/

adjusted_dataset

Dataset card Viewer Files Files and versions Community

Split (2)

train · 20.5k rows

text stringlengths 78 3.17k
<｜begin▁of▁sentence｜> ### Instruction: MMRP-3-FATAL_PROTOCOL_FAILURE ### Response: (Severity: 3), (Category: L2), (Description: A fatal error has been hit during protocol processing. The process is restarting to attempt recovery.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: IFMGR_ENCAP-3-INIT_ERR ### Response: (Severity: 3), (Category: PKT_INFRA), (Description: Process initialization failed while applying encapsulation config, for which there is no current handling, therefore the system may now be out of sync.), (Recommended Action: Repeat failed configuration command. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: HFR_IP_EA-3-UPDATE_ERR ### Response: (Severity: 3), (Category: PLATFORM), (Description: An updation error has occured for IPv4 Forwarding Information Base.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: FIA-1-SKT_SP1_INTR_BAD_ALIGN_0 ### Response: (Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_BAD_ALIGN interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: OFA-6-INFO ### Response: (Severity: 6), (Category: PLATFORM), (Description: This is just an info message in OFA), (Recommended Action: No action is required.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: SSE_LI_EA-7-INIT ### Response: (Severity: 7), (Category: L2), (Description: Error messages are seen during li_ea process initialisation failures.), (Recommended Action: No action is required. Process will be restarted. If not recovered, it's a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. REDUCE) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: SSD_ENC-1-CARD_RELOAD ### Response: (Severity: 1), (Category: OS), (Description: Encryption operation prepare phase is complete. Card will go through a reload to complete the operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: RIP-3-ERR_ITAL ### Response: (Severity: 3), (Category: ROUTING), (Description: Internal error encountered in RIP ITAL module.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: INV-7-ERR_EDM_CREATE ### Response: (Severity: 7), (Category: PLATFORM), (Description: Failure in Inventory Manager event creation), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: INGRESSQ-3-ERR_RES_PROG ### Response: (Severity: 3), (Category: FABRIC), (Description: Ingressq encountered an error during resource programming. If there are no further attempts to reprogram the device, the device behavior may be inconsistent.), (Recommended Action: The driver/client processes try to recover from this error. If any discrepancies are found in the device functionality, contact TAC Support. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: SHMWIN_SVR-6-SHARED_MUTEX_REVIVED ### Response: (Severity: 6), (Category: OS), (Description: A participant process crashed or exited while holding the shared shmwin control mutex and the shmwin_svr revived the mutex.), (Recommended Action: The message indiciates that a process exited while holding the shmwin mutex. The revival message is just informational only. It indicates that shmwin server has recovered the mutex. No action is required if the router is still functional. The attention should be directed to whether there were any process crashes. Show context output may give the information of any process crashes.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: JACKET-3-CPU_CTRL_INTS ### Response: (Severity: 3), (Category: L2), (Description: Unable to enable/disable/clear a CPU Ctrl interruprt register.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show controllers CPUCtrl ltrace <><noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show controllers CPUCtrl ltrace <><noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: IEP-7-ERR_INTERNAL ### Response: (Severity: 7), (Category: IP), (Description: An internal system error occured.), (Recommended Action: Debug message only. No action is required.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: SKP_IP_EA-3-ERROR1 ### Response: (Severity: 3), (Category: PLATFORM), (Description: A runtime error occurred in IP EA. Typically, this is an error where the software fails to initialize or programming of forwarding feature fails. Here is a list of possible reasons for this message (not all-inclusive). - Failed to initialize software. This condition indicates a problem with the software on the card where the error is seen. Typically, this occurs when the software tries to initialize invalid objects. - Invalid objects. This condition indicates a problem where the object being processed by the software is invalid. - Failed to program forwarding features. This condition indicates a problem where the software fails to program forwarding features to the hardware.), (Recommended Action: Please collect the console log and the CLI output. <CLI> <RP> show cef ipv4 </RP> <LC> show cef ipv4 location <> show cef ipv4 trace location <> show cef platform trace all all location <> </LC> <TECH> show tech cef show version show install active summary </TECH> </CLI> Also notice if the error message is transient or persistent. Report to your technical support representative.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: DSCMEDIA-4-THREAD_MUTEX_LOCK_FAIL ### Response: (Severity: 4), (Category: PLATFORM), (Description: DSC media DLL encountered an error while locking a mutex. The operation related to the resource may be affected while the system continues to run normally.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: DPA_FM-3-ACTION_IN_ACL_NOT_SUPPORTED_DEFAULT ### Response: (Severity: 3), (Category: PKT_INFRA), (Description: The following actions in an ACL are not supported in the direction specified in the default ACL TCAM key: capture set-ttl), (Recommended Action: create a user-defined key with the hw-module command) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: IMAEDM-7-EVM_CREATE_FAILED ### Response: (Severity: 7), (Category: PKT_INFRA), (Description: The event_manager_create function reported an error trying to initialize the event manager.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: RSVP-3-CHKPT_XFORM_BUFFER_TOO_SMALL ### Response: (Severity: 3), (Category: ROUTING), (Description: The RSVP checkpoint table translation library was invoked with insufficient space to store the transformed checkpoint record.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: BGP-4-WRITE_SOCKET ### Response: (Severity: 4), (Category: ROUTING), (Description: BGP detected that a socket write failed This happens in the standby.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: DSC-7-STORE_REBOOT_INFO_FAIL ### Response: (Severity: 7), (Category: PLATFORM), (Description: Chassis APIs that write to non volatile memory failed.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: FCA-2-TS_LS_TIMEOUT ### Response: (Severity: 2), (Category: PLATFORM), (Description: Device driver detected a timeout error), (Recommended Action: Please try to correct the problem by reloading the board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: SPA_JBI-7-DEBUG ### Response: (Severity: 7), (Category: PLATFORM), (Description: This is a debuging message from the altera JTAG player), (Recommended Action: NONE) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: FIA-1-SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_2_0 ### Response: (Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_DISP_ERROR_LANE_INDICATE_2 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: MLAP-3-FATAL_ERROR_FM_EXIT ### Response: (Severity: 3), (Category: INFRA), (Description: A high severity error occurred in MLAP communication with Fault Management.), (Recommended Action: show tech-support control-ethernet) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: TYPE6-3-SYSMGR_BLOCK_UNTIL_PRIMARY_FAILED ### Response: (Severity: 3), (Category: SECURITY), (Description: Sysmgr API to process block until the go-primary notification is failed), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: IFSTATS-3-CHKPT_INIT ### Response: (Severity: 3), (Category: MGBL), (Description: A fatal error was encountered during initialization.), (Recommended Action: If the process does not restart automatically then try manually restarting it. A likely cause for this error is that the system has run out of memory. If this is not an out-of-memory problem and restarting the process does not solve it then Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: PLATFORM-6-ERR_THREAD_START ### Response: (Severity: 6), (Category: TOPOLOGY), (Description: System Admin Manager failed to start the specified thread.), (Recommended Action: No action is required.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: IMDR-2-ABORT ### Response: None <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: How does the sporadic scheduling algorithm work in IOS XR? ### Response: With sporadic scheduling, a thread is assigned a normal priority, low priority, budget time, and replenish interval. The thread runs at normal priority until it exhausts its budget, then drops to low priority. After the replenish interval, the budget is restored and the thread returns to normal priority. This allows important threads to execute while preventing CPU starvation. <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: MPLS_LSD-4-STDBY_IPC_FLAP_BULK_OP ### Response: (Severity: 4), (Category: ROUTING), (Description: The AIPC link between active-LSD and standby-LSD has accumulated a large number of bulk-ops that are pending to be transmitted. This state can lead cpu-hogging by active-LSD. To recover from this state the affected AIPC link has been torn down and re-established. This recovery action will not impact traffic and is purely a syncing issue between active-LSD and standby-LSD.), (Recommended Action: Please collect show tech for mpls_lsd, p2p process mpls_lsd instance-id 1, aipcproxy and gsp for further investigation.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: LIBNOTIFY-7-SYSDB_SET ### Response: (Severity: 7), (Category: INSTALL), (Description: The Install infrastructure was unable to write some information which is required to complete the current request or operation.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.') <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: FCA-0-PEX_INT_VS1_BIT ### Response: (Severity: 0), (Category: PLATFORM), (Description: Device driver detected a pex switch error), (Recommended Action: Please try to correct problem by reloading board using command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: PLAT_THOR_L2FIB_VPLS-3-LTRACE_WARNING ### Response: (Severity: 3), (Category: PLATFORM), (Description: Failed to initialize the ltrace module in the platform L2FIB VPLS component.), (Recommended Action: None, platform software will correct itself if this happens.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: FIA-3-ERR_SHELFMGR_INIT ### Response: (Severity: 3), (Category: FABRIC), (Description: The FIA driver failed to retrive card state/type from shelfmgr. If the failure is due to a non EBUSY/EAGAIN error this will result in restart of the FIA driver process. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. If the problem continues, sysmgr will trigger MSC reload. After a certain number of MSC reloads, the shelf manager will permanently shutdown the MSC.), (Recommended Action: Please collect the information specified in required_info section. Verify that the fia_driver is up and running by executing the following command at the CLI of the active RP: 'show process fia_driver location <loc>' If it is still non-operational, enable the following debugs of the FIA driver process: eio All EIO library events error Errors in the driver fatal Fatal errors which cause driver to exit info All informational events init Initialization events Restart the driver by executing the following command at the CLI of the active RP: process restart fia_driver loc <loc>) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: BGP-3-SCAN_INIT ### Response: (Severity: 3), (Category: ROUTING), (Description: An error occurred while initializing the scanner library. The process will be restarted.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: DSC-3-ROLE_CHANGE_THREAD_FAIL ### Response: (Severity: 3), (Category: PLATFORM), (Description: The thread that register with sysmgr for the role change has failed to create/detach as mentioned in the message), (Recommended Action: The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, to recover. Verify that the dsc process is up and running by executing the following command at the CLI of the active RP: 'show process dsc' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: SCHBRO-7-LIST ### Response: (Severity: 7), (Category: MGBL), (Description: An error occurred invoking an MDA function. The details are in the error string.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: What are the key characteristics of the Lightweight Messaging (LWM) IPC? ### Response: LWM is a connection-oriented synchronous IPC mechanism built on the microkernel message passing services. Key characteristics include\n- Synchronous request/reply semantics\n- Supports both intra-node and inter-node transparently via Qnet\n- Sender blocks until receiver processes the message and replies\n- Prevents receiver overrun but has higher latency than asynchronous IPC\"\n <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: L2FIB_SHM-3-ERR_L2FIB_SHM ### Response: (Severity: 3), (Category: L2), (Description: Some error occurred in operations related to Shared Memory area. This could have occurred due to overuse of memory. This can result in- 1) Not programming hardware for proper forwarding. 2) Not creating new bridge.), (Recommended Action: To minimize the scaling of bridges, some processes (unnecessary services) can be removed from the configs. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: TTY-3-ENV_VARS ### Response: (Severity: 3), (Category: MGBL), (Description: Some instances of exec require the environment to be set up before exec initializes. The process which execs 'exec' has failed to do this.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: SONETMIBCORE-7-DEBUG2 ### Response: (Severity: 7), (Category: SNMP), (Description: A Debug message), (Recommended Action: No action is required.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: CHNLZD_EFCM-3-ERROR_CFG_BUFF_MAP_MEMORY ### Response: (Severity: 3), (Category: L2), (Description: An error has occurred in the Extended Flow Control Manager. EFCM was unable to map shared memory for debug.), (Recommended Action: RECUR) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: OSPFv3-3-IPARM ### Response: (Severity: 3), (Category: ROUTING), (Description: The specified IP/ARM request failed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: MEMPOOL_EDM-1-EVENT_BLOCK_ERROR ### Response: (Severity: 1), (Category: OS), (Description: Error during event block), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.') <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: HFR_IPV4_MRIB-3-FGID_TIMER_FAIL ### Response: (Severity: 3), (Category: ROUTING), (Description: The MRIB encountered error while timer operation. The error condition can occur during: (1) initializing the timer (2) creating a new leaf timer), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: ICPE_GCO-4-INVALID_CHASSIS_MAC ### Response: (Severity: 4), (Category: PKT_INFRA), (Description: It has not been possible to retrieve a valid chassis MAC from the LRd infrastructure. ICPE will continue to retry to obtain a valid chassis MAC, but the nV Satellite feature cannot be initialized further until a valid chassis MAC has been obtained.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: LDA-3-TIMING_FAILURE ### Response: (Severity: 3), (Category: PLATFORM), (Description: An attempt to initialize or configure timing failed. 1588 Timing functionality may be impacted if it is configured. The error message describes the error, provides an error code and a string interpretation of the error code.), (Recommended Action: Please try to recover by reloading line card using CLI 'hw-mod loc <> reload'. If the issue persists, collect console log and the following information. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. - sh platform - sh install summary - sh version - show tech-support ethernet interfaces - show tech-support location <> file <> - show hw-module fpd location all) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: MFWD_MA-3-GENINITFAIL ### Response: (Severity: 3), (Category: ROUTING), (Description: An unrecoverable error occurred at system initialization time.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: SMART_LIC-6-RESERVE_CANCELED ### Response: (Severity: 6), (Category: LICENSE), (Description: None.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: NPUXBAR_BRIDGE-3-TSP_TDDR_TIMEOUT ### Response: (Severity: 3), (Category: PLATFORM), (Description: TSP TxDDR timeout.), (Recommended Action: Minor error, no action required.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: BACKUPSSHD-3-ERR_SYSDB_UNPACK ### Response: (Severity: 3), (Category: SECURITY), (Description: Internal error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.') <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: AUTORP_MAP-3-DEBUG_FAILURE ### Response: (Severity: 3), (Category: ROUTING), (Description: This error indicates an error in the debug initialization.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show auto-rp mapping-agent trace<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show auto-rp mapping-agent trace<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information. Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show logging process autorp_map_agent error<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show logging process autorp_map_agent error<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: CGN-3-RODDICK_UPD_FAIL ### Response: (Severity: 3), (Category: SERVICES), (Description: Roddick was not updated with change in vrf db.), (Recommended Action: This is a serious error and cgn_ma process has to be restarted.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: What are BGP update groups and what are their benefits? ### Response: An update group is a collection of peers with identical outbound policy. On IOS-XR, peers with the same outbound policy are automatically assigned to the same update group. Update generation is done once per group, conserving resources. Debugs also operate at the update group level. <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: PMIPV6-3-BA_UNSPEC_FAIL_11 ### Response: (Severity: 3), (Category: IP), (Description: The MN or Logical-MN is configured for IPv4 or Dual service. Hence IPv4 address family is required for IPv4 traffic forwarding; whereas it is not configured in the VRF.), (Recommended Action: Configure IPv4 address family in the VRF specified in the error message.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: SSHD_SYSLOG_PRX-3-ERR_MALLOC ### Response: (Severity: 3), (Category: SECURITY), (Description: Internal error. Memory allocation failed.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.') <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: TTY-3-MGMT_NO_FEATURE ### Response: (Severity: 3), (Category: MGBL), (Description: No feature name was provide to the TTY Management terminal command process.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: What is BGP Graceful Restart and how does it improve network convergence? ### Response: BGP Graceful Restart is a mechanism that allows a BGP speaker to continue forwarding traffic while the BGP process restarts, thus avoiding traffic loss during the restart. It works by having the restarting speaker preserve its forwarding state and having the neighboring speakers retain the restarting speaker's routes during the restart. This significantly improves network convergence after a planned or unplanned BGP restart. <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: QOS-3-PROGRAM_REDQ_ENTRY_FAIL ### Response: (Severity: 3), (Category: QOS), (Description: QMgr encountered an error while programming redq entry for interface default queues in the associated PSE), (Recommended Action: REDQ drop threshold could be 0.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: What is the purpose of the MPLS TE FRR backup tunnel interface feature? ### Response: The MPLS TE FRR backup tunnel interface feature allows a physical interface to be used exclusively for TE backup tunnels, rather than also carrying normal traffic. The backup tunnel interface is not advertised in the IGP and is not used for SPF calculations. This dedicates the interface resources for backup and avoids potential congestion from regular traffic. <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: NP-0-SLICE_SHUTDOWN_FAILED ### Response: (Severity: 0), (Category: PLATFORM), (Description: Unrecoverable error occurred on the NP during the slice shutdown sequence. The line card will be reloaded.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: RSVP-4-SHUTDOWN ### Response: (Severity: 4), (Category: ROUTING), (Description: RSVP process has encountered a problem which means it is no longer able to continue and is shutting down. The message includes a brief description of the problem. The message also describes whether or not RSVP process has been automatically restarted.), (Recommended Action: Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Follow the instructions associated with this message. If message states that an automatic restart has been scheduled, then RSVP process will recover automatically. If a manual restart is required, then 'process restart rsvp' is required to recover.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: MBUS-7-SVC_AGENT_CHECK_FAILED ### Response: (Severity: 7), (Category: PLATFORM), (Description: mbus debug information %s - is a string outlining the action that the system will take to attempt to recover (e.g. forcing RAM download).), (Recommended Action: No action is required.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: INSTMGR-3-ISM_PD_LIB_SPA_RELOADED ### Response: (Severity: 3), (Category: INSTALL), (Description: The indicated SPA was reloaded during ISSU and is being placed in disable state for the duration of the ISSU operation. This is safety measure to prevent the reload event of this SPA affecting the overall ISSU operation on the system.), (Recommended Action: The reload event of SPA should be investigated after the ISSU operation if it was not triggered by user using 'hw-module location <node> reload' command.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: SPAN_LIB-3-SPP_MSG_FAIL ### Response: (Severity: 3), (Category: L2), (Description: The SPAN SPP client library failed to decode a message from the EA SPP module. This message has not been delivered to SPP.), (Recommended Action: Check the session configuration and any recent packet collection action commands issued for this session.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: BRIDGE-3-PKT_LEN_ERR_0_XAUI_0 ### Response: (Severity: 3), (Category: PLATFORM), (Description: Packet length error - 0 from XAUI on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: CEPKI-3-INV_TYPE ### Response: (Severity: 3), (Category: SECURITY), (Description: Cerficate with invalid attribute.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.') <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: DIAG-4-INVALID_MONITORING_INTERVAL ### Response: (Severity: 4), (Category: DIAG), (Description: The specified test monitoring interval is too small.), (Recommended Action: The system is working properly and no user action is required. If you want to specify a smaller testing interval, the warning message text provides the lowest possible configurable interval for the specified monitoring interval.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: PFDIAGBASE-3-INIT_FAIL ### Response: (Severity: 3), (Category: DIAG), (Description: An error occurred during initialization of diagnostic's server queue.), (Recommended Action: Normally this message type indicates a transient error, and even though it will cause the process to be terminated, the problem will usually be remedied once the emitting process is restarted. If the error keeps occuring frequently then copy the error message exactly as it appears on the screen and gather any relevant information about the circumstances. Contact your technical support representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: How to configure MPLS on an interface? ### Response: To enable MPLS on an interface, use the 'mpls ip' command in interface configuration mode. RP/0/RP0/CPU0:router(config)#interface GigabitEthernet0/0/0/0 RP/0/RP0/CPU0:router(config-if)#mpls ip <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: How do you register and use onboard EEM policies in Cisco IOS XR? ### Response: To register and use onboard EEM policies in Cisco IOS XR, you need to configure the 'event manager policy' command followed by the policy filename. The policy file should be present on the router's local storage, and it defines the event, conditions, and actions to be taken. <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: FIA-3-ERR_RESTART ### Response: (Severity: 3), (Category: FABRIC), (Description: FIA driver encountered a persistance fatal error during intialization and subsequent restarts. A reason text will be supplied. Call support with this text.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: What is the purpose of the MPLS traffic engineering forwarding adjacency feature? ### Response: The MPLS traffic engineering forwarding adjacency feature allows an MPLS TE tunnel to be used as a link in an IGP topology. This makes the tunnel appear as a single hop from the IGP perspective, irrespective of how many hops the tunnel actually traverses. It is enabled with the tunnel mpls traffic-eng forwarding-adjacency command. <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: PLACED-3-UNEXPECTED_MSG ### Response: (Severity: 3), (Category: OS), (Description: Received unexpected message.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log. Issue the <CmdBold>show tech-support placed<noCmdBold> command to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the <CmdBold>show tech-support placed<noCmdBold> output, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: OBFLINFRA_CLI-7-FAIL_TO_GET_SDD ### Response: (Severity: 7), (Category: OS), (Description: Fail to get sdd information), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: CHANCON-6-SVC_INFO ### Response: (Severity: 6), (Category: OS), (Description: A service API information is displayed.), (Recommended Action: SUPPORT) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: CPAK-2-LANE_4_LOW_TX_POWER_ALARM ### Response: (Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power less than or equal to the low Tx power alarm threshold. The CPAK is the pluggable optics on the line cards. The Tx power threshold values are read from the CPAK.), (Recommended Action: Verify that the device is properly inserted. Replace the CPAK with a working one (if any) to isolate bad optics. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: INSTHELPER-4-FAILED_MDR_NODE ### Response: (Severity: 4), (Category: INSTALL), (Description: The installation required a warm-reload of the node, but the warm-reload failed. The install will be effected by a cold reload of the node.), (Recommended Action: No user action is required.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: NPUXBAR_BRIDGE-3-RSPI_PROT_EOP_ABORT ### Response: (Severity: 3), (Category: PLATFORM), (Description: RxSPI protocol end of packet abort.), (Recommended Action: Minor error, no action required.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: CONFIG-3-INTERFACE_ERROR ### Response: (Severity: 3), (Category: MGBL), (Description: An error was encountered during interface configuration restore/save operation. Some configuration may not have been applied or the line card may be in unusable state.), (Recommended Action: Reapply the missing configuration. If the interface still doesn't come up, try restarting the line card.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: IMFPGA-3-EDC_OPTICS_SERDES_FAULT ### Response: (Severity: 3), (Category: PLATFORM), (Description: Serdes signal fault detected/cleared between EDC and optics.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: BGP-3-MAX_VALUE_EXCEEDED ### Response: (Severity: 3), (Category: ROUTING), (Description: The value of an internally computed variable has exceeded the maximum value.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: CCC-4-ISO_INSTALL_DONE ### Response: None <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: ITAL-5-UNSUPPORTED ### Response: (Severity: 5), (Category: OS), (Description: Some client requires unsupported ITAL functionality.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: FAB_SVR-7-ERR_EVENT_CONN_NOTIFY ### Response: (Severity: 7), (Category: FABRIC), (Description: Fabric server encountered an error while trying to register event handler for disconnection or connection error event. This facility is deemed crucial and the process automatically restarts on this failure.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information..) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: FIA-1-SKT_SP0_INTR_SLICE3_CODE_ERR_0 ### Response: (Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE3_CODE_ERR interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board is seated properly. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: CFP-2-LANE_15_HIGH_BIAS_ALARM ### Response: (Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias threshold values are read from the CFP.), (Recommended Action: Verify that the device is properly inserted. Check installation is compliance with 'Cisco ASR 9000 Series Aggregation Service Router Hardware Installation Guide'. Check all the FPDs are upto date using 'show hw-module fpd location all'. If the issue persists then copy the error message exactly as it appears, and report it to your technical support representative. If possible, also provide the output of the commands 'show tech-support ethernet interface location <loc>', 'show hw-module fpd location all' and 'admin show inventory'.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: PLIM_ASIC-4-HW_WARNING ### Response: (Severity: 4), (Category: L2), (Description: Plim Asic errors. Typically these indicate errors detected by the ASIC. Too many of these errors might indicate problem with the board, and may trigger packet loss. These errors seen during LC boot up or SPA OIR are harmless.), (Recommended Action: Check if spa is seating properly Check whether process 'plaspa_server' is up and running. Check if the linecard reported any other errors and/or traffic loss was observed. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: FSDB_AGG-3-SERVER_INIT_FAILURE ### Response: (Severity: 3), (Category: FABRIC), (Description: FSDB aggregator failed server initialization with above reson.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: CIH-5-ASIC_ERROR_REPROG_RESOURCE_THRESH ### Response: (Severity: 5), (Category: PLATFORM), (Description: An ASIC error has occured and cause reprogram resource, such error has crossed threshold.), (Recommended Action: Errors that cause reprogram resource have happened and exceed threshold. This has been handled. None) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: SYSMGR-4-MANDATORY_ON ### Response: None <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: BCDL-3-MSG_DOUBLE_AGENT ### Response: (Severity: 3), (Category: OS), (Description: A BCDL agent for the group is already running.), (Recommended Action: Contact support.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: DPA-2-RX_FAULT ### Response: (Severity: 2), (Category: PLATFORM), (Description: Remote Fault: The PLIM received a Remote Fault on the given interface which will result in a link down. Please check the name of interface in error description. The traffic may start getting dropped after this error message. Local Fault: The PLIM received a Local Fault on the given interface which will result in a link down. Please check the name of interface in error description. The traffic may start getting dropped after this error message.), (Recommended Action: Remote Fault: Correct the far end interface. Local Fault: Correct the far end or fiber to this interface.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: rspp_rio_netio-3-CAPS_BUILDER_FAILED ### Response: (Severity: 3), (Category: SERVICES), (Description: The service ingress diversion NetIO DLL capsulation builder function failed. Service ingress diversion in NetIO for the specified interface will not function properly.), (Recommended Action: SUPPORT) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: SUB_SIP_SHARED_DB-4-TRACE_INIT ### Response: (Severity: 4), (Category: SUBSCRIBER), (Description: This is a non-fatal error in initializing tracing buffer and can happen when the router is low on memory. It should not affect the functioning of the router, but trace messages may not be logged.), (Recommended Action: Check the memory state of the ltrace process and overall system. Reduce the activities on the system if required for tracing.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: ESD-3-SWITCH_CONFIG_FAILURE ### Response: (Severity: 3), (Category: INFRA), (Description: The Ethernet Switch Driver (ESD) process encountered an error while configuring the switch during driver initialization. In order to recover, ESD will reset the switch, then exit so that it can be restarted by the process manager and attempt to configure the switch again.), (Recommended Action: If this problem does not recur, no intervention is required to recover. To determine why this problem occurred, or if the problem occurs multiple times, collect the Ethernet Switch Driver (ESD) traces and related information using the 'show tech-support control-ethernet' and 'show tech-support ctrace' commands. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: PLATFORM_SERVICE_EA-3-ERR_SERVICE_INIT ### Response: (Severity: 3), (Category: OS), (Description: service-application IPSec is unsupported on this variant of LC. If this LC forwards traffic to a service-application IPSec enabled interface then traffic will get forwarded in cleartext or packets may get dropped.), (Recommended Action: Replace the LC if you want it to support service traffic. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: BACKUPSSHD-3-ERR_ERRNO ### Response: (Severity: 3), (Category: SECURITY), (Description: Error description, error.), (Recommended Action: 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.') <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: PLAT_FIB-3-ERROR_INFO ### Response: (Severity: 3), (Category: PLATFORM), (Description: Error information during improper updation of variables or incorrect return state in platform FIB), (Recommended Action: RECUR) <\|EOT\|>
<｜begin▁of▁sentence｜> ### Instruction: PLDMGR-2-BOARD_RESTART ### Response: (Severity: 2), (Category: PLATFORM), (Description: The FPGA Manager api for resetting the board via a control register has been called by the process with the specified PID.), (Recommended Action: Collect event logs and any other data specified by the crashing program) <\|EOT\|>