id
int64 0
180
| requirement
stringlengths 28
546
| testcase
stringlengths 343
23k
|
---|---|---|
100 | Station Lists shall be persistent across operating modes | Title: AM station list persists during Ignition cycle
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Perform Ignition cycle (Ignition OFF-> Ignition ON)
3. Select Radio application from Home screen and launch AM source
4. Select Browse option from AM landing screen
Expected Result:
1. AM station list shall be displayed
2. System shall be turned ON after igniton cycle
3. AM landing screen shall be displayed
4. AM station list shall persist after Ignition cycle
Title: FM station list persists during Ignition cycle
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Perform Ignition cycle (Ignition OFF-> Ignition ON)
3. Select Radio application from Home screen and launch FM source
4. Select Browse option from FM landing screen
Expected Result:
1. FM station list shall be displayed
2. System shall be turned ON after igniton cycle
3. FM landing screen shall be displayed
4. FM station list shall persist after Ignition cycle |
101 | Station list for AM shall be sorted by frequency in ascending order. | Title: AM Station list sort - Frequency in ascending order
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list
Expected Result:
1. AM station list shall be displayed
2. AM station list shall be sorted by frequency in ascending order |
102 | Station lists shall include only stations that meet the quality_threshold criteria's | Title: AM Stations meets quality threshold
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. Quailty_threshold value is set for AM band
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Press Refresh option available in AM station list
3. Wait till station list update is completed
4. Play each stations from station list
Expected Result:
1. AM station list shall be displayed
2. "Station list updating..." text shall be displayed
3. Station list update shall be completed
4. Streaming audio from each AM station shall be clear, without any interferences
Title: FM Stations meets quality threshold
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. Quailty_threshold (TBD) value is set for FM band
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Press Refresh option available in FM station list
3. Wait till station list update is completed
4. Play each stations from station list
Expected Result:
1. FM station list shall be displayed
2. "Station list updating..." text shall be displayed
3. Station list update shall be completed
4. Streaming audio from each FM station shall be clear, without any interferences |
103 | System shall allow user to cancel Traffic Announcement.
In case of cancellation, system shall stop playing TA and restore the previous source. | Title: Cancelling Traffic announcement during FM streaming
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Generate a Traffic announcement via TRX
2. Dismiss the Traffic announcement
Expected Result:
1. TA from FM shall be displayed on the System screen
2. Traffic announcement shall be dismissed. FM station shall continue streaming
Title: Cancelling Traffic announcement during USB playback
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
8. USB device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch USB source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a Traffic announcement via TRX hardware
5. Dismiss the Traffic announcement
Expected Result:
1. Media screen shall be displayed
2. USB Media source shall be launched
3. Selected song shall be played
4. TA from FM shall be displayed on the System screen
5. Traffic announcement shall be dismissed. USB media playback shall continue
Title: Cancelling Traffic announcement during BT playback
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
8. BT device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch BT source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a Traffic announcement via TRX hardware
5. Dismiss the Traffic announcement
Expected Result:
1. Media screen shall be displayed
2. BT Media source shall be launched
3. Selected song shall be played
4. TA from FM shall be displayed on the System screen
5. Traffic announcement shall be dismissed. BT media playback shall continue playing
Title: Cancelling Traffic announcement during iPod playback
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. TA is enabled in the radio settings
6. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
7. iPod device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch iPod source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a Traffic announcement via TRX hardware
5. Dismiss the Traffic announcement
Expected Result:
1. Media screen shall be displayed
2. iPod Media source shall be launched
3. Selected song shall be played
4. TA from FM shall be displayed on the System screen
5. Traffic announcement shall be dismissed. iPod media playback shall continue playing
Title: Dismissing Traffic announcement after accepting, during FM streaming
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Generate a Traffic announcement via TRX
2. Select "Continue" from the System screen
3. Dismiss the Traffic announcement
Expected Result:
1. TA from FM shall be displayed on the System screen
2. Currently streaming FM station shall mute and Traffic announcement shall be played. There shall not be any annoying sound parasite during the transition from FM to TA
3. Traffic announcement shall be dismissed. FM station shall unmute and restore streaming. There shall not be any annoying sound parasite during the transition from TA to FM
Title: Dismissing Traffic announcement after accepting, during USB playback
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
8. USB device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch USB source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a Traffic announcement via TRX
5. Select "Continue" from the System screen
6. Dismiss the Traffic announcement
Expected Result:
1. Media screen shall be displayed
2. USB Media source shall be launched
3. Selected song shall be played
4. TA from FM shall be displayed on the System screen
5. Currently playing USB media shall mute and Traffic announcement shall be played. There shall not be any annoying sound parasite during the transition from USB to TA
6. Traffic announcement shall be dismissed. USB media shall unmute and restore playing. There shall not be any annoying sound parasite during the transition from TA to USB source
Title: Dismissing Traffic announcement after accepting, during BT playback
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
8. BT device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch BT source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a Traffic announcement via TRX
5. Select "Continue" from the System screen
6. Dismiss the Traffic announcement
Expected Result:
1. Media screen shall be displayed
2. BT Media source shall be launched
3. Selected song shall be played
4. TA from FM shall be displayed on the System screen
5. Currently playing BT media shall mute and Traffic announcement shall be played. There shall not be any annoying sound parasite during the transition from BT to TA
6. Traffic announcement shall be dismissed. BT media shall unmute and restore playing. There shall not be any annoying sound parasite during the transition from TA to BT
Title: Dismissing Traffic announcement after accepting, during iPod playback
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
8. iPod device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch iPod source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a Traffic announcement via TRX
5. Select "Continue" from the System screen
6. Dismiss the Traffic announcement
Expected Result:
1. Media screen shall be displayed
2. iPod Media source shall be launched
3. Selected song shall be played
4. TA from FM shall be displayed on the System screen
5. Currently playing iPod media shall mute and Traffic announcement shall be played. There shall not be any annoying sound parasite during the transition from iPod to TA
6. Traffic announcement shall be dismissed. iPod media shall unmute and restore playing. There shall not be any annoying sound parasite during the transition from TA to iPod
Title: Dismissing Traffic announcement after accepting, during AM streaming
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM and FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Select AM source from the Band option
2. Select Browse option and select any station
3. Generate a Traffic announcement via TRX
4. Select "Continue" from the System screen
5. Dismiss the Traffic announcement
Expected Result:
1. AM Landing screen shall be launched
2. Selected AM station shall be played
3. TA from FM shall be displayed on the System screen
4. Currently streaming AM station shall mute and Traffic announcement shall be played. There shall not be any annoying sound parasite during the transition from AM to TA
5. AM station shall unmute and restore streaming. There shall not be any annoying sound parasite during the transition from TA to AM
Title: Dismissing Traffic announcement after accepting, during DAB streaming
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB and FM Modulator (TRX) are connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Select DAB source from the Band option
2. Select Browse option and select any station
3. Generate a Traffic announcement via TRX
4. Select "Continue" from the System screen
5. Dismiss the Traffic announcement or Wait till Traffic announcement is over
Expected Result:
1. DAB Landing screen shall be launched
2. Selected DAB station shall be played
3. TA from FM shall be displayed on the System screen
4. Currently streaming DAB station shall mute and Traffic announcement shall be played. There shall not be any annoying sound parasite during the transition from DAB to TA
5. DAB station shall unmute and restore streaming. There shall not be any annoying sound parasite during the transition from TA to DAB
Title: Cancelling Traffic announcement during AM streaming
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM and FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Select AM source from the Band option
2. Select Browse option and select any station
3. Generate a Traffic announcement via TRX
4. Dismiss the Traffic announcement
Expected Result:
1. AM Landing screen shall be launched
2. Selected AM station shall be played
3. TA from FM shall be displayed on the System screen
4. Traffic announcement shall be dismissed. AM station shall continue streaming
Title: Cancelling Traffic announcement during DAB streaming
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB and FM Modulator (TRX) are connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Select DAB source from the Band option
2. Select Browse option and select any station
3. Generate a Traffic announcement via TRX
4. Dismiss the Traffic announcement
Expected Result:
1. DAB Landing screen shall be launched
2. Selected DAB station shall be played
3. TA from FM shall be displayed on the System screen
4.Traffic announcement shall be dismissed. DAB station shall continue streaming |
104 | System shall allow user to enable/disable TA from settings.
On first start, the default setting shall be TA disabled. | Title: Traffic Announcement setting to 'ON'
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Traffic Announcement setting is set to 'OFF'
Steps:
1. Select Settings option from FM landing screen
2. Turn ON Traffic Announcement settings option
Expected Result:
1. Radio settings screen shall be displayed
2. Traffic Announcement setting shall be set to 'ON'
Title: Traffic Announcement setting to 'OFF'
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Traffic Announcement setting is set to 'ON'
Steps:
1. Select Settings option from FM landing screen
2. Turn OFF Traffic Announcement settings option
Expected Result:
1. Radio settings screen shall be displayed
2. Traffic Announcement setting shall be set to 'OFF'
Title: Traffic Announcement is set to 'OFF' during first startup
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Traffic Announcement setting is set to 'ON'
Steps:
1. Perform Factory Reset from Settings application
2. Select Radio application from Home screen
3. Select Settings option from FM landing screen and observe Traffic Announcement setting
Expected Result:
1. Factory Reset has been successfully performed
2. Radio application shall be launched
3. Traffic Announcement setting shall be set to 'OFF' |
105 | System shall be able to detect and play Traffic Announcements (TA). | Title: System shall support Traffic announcement
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Generate a Traffic announcement via TRX hardware
2. Press Continue on Traffic announcement popup
3. Dismiss the Traffic announcement
4. Repeat step-1 and wait for 5 seconds once TA is displayed on System
Expected Result:
1. Traffic announcement popup shall be displayed on System screen
2. Currently streaming FM station shall mute and Traffic announcement shall be played
3. Traffic announcement shall be dismissed. FM station shall unmute and continue playing
4. Currently streaming FM station shall mute and Traffic announcement shall be played |
106 | System shall be able to manage FM announcements (TA or PTY31) when Radio DAB is listened and TA is available on the equivalent FM station (or EON) and no DAB announcement is in progress. | Title: DAB radio mute during Traffic announcement
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB and FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Select DAB source from the Band option
2. Select Browse option and select any station
3. Generate a Traffic announcement via TRX
4. Select "Continue" from the System screen
5. Dismiss the Traffic announcement or Wait till Traffic announcement is over
Expected Result:
1. DAB Landing screen shall be launched
2. Selected DAB station shall be played
3. TA from FM shall be displayed on the System screen
4. Currently streaming DAB station shall mute and Traffic announcement shall be played
5. DAB station shall unmute and restore streaming
Title: DAB radio mute during PTY31
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB and FM Modulator (TRX) is connected to System
6. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Select DAB source from the Band option
2. Select Browse option and select any station
3. Generate a PTY31 via TRX hardware
4. Select "Continue" from the System screen
5. Wait till PTY31 is over
Expected Result:
1. DAB Landing screen shall be launched
2. Selected DAB station shall be played
3. PTY31 from DAB shall be displayed on the System screen
4. Currently streaming DAB station shall mute and PTY31 shall be played
5. DAB station shall unmute and restore streaming
Title: FM TA during DAB streaming
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB and FM modulator(TRX) are connected to the system
5. Equivalent FM station is available for a DAB station
6. DAB landing screen is active
Steps:
1. Select the browse option from DAB landing screen
2. Select the DAB station having Equivalent FM station
3. Generate the TA from the FM modulator (No DAB announcement is in progress)
4. Select "Continue" from the HMI
5. Select "Dismiss" from the HMI
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played
3. Traffic announcement from FM shall be displayed on the hmi
4. TA from FM shall be played
5. TA shall be terminated and previously tuned DAB station shall be played
Title: FM PTY31 during DAB streaming
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB and FM modulator(TRX) are connected to the system
5. Equivalent FM station is available for a DAB station
6. DAB landing screen is active
Steps:
1. Select the browse option from DAB landing screen
2. Select the DAB station having Equivalent FM station
3. Generate the PTY31 from the FM modulator (No DAB announcement is in progress)
4. Select "Continue" from the HMI
5. Wait till PTY31 is over
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played
3. PTY31 from FM shall be displayed on the hmi
4. DAB station shall mute and PTY31 from FM shall be played
5. DAB station shall unmute and restore streaming
Title: FM TA during DAB service announcement
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB and FM modulator(TRX) are connected to the system
5. Equivalent FM station is available for a DAB station
6. DAB landing screen is active
7. Streaming file having TA is streamed on the DAB modulator
Steps:
1. Select the browse option from DAB landing screen
2. Select the DAB station having Equivalent FM station
3. Wait for the service announcement from DAB station and select "Continue"
4. Generate the TA from the FM modulator
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played
3. Service announcement from DAB shall be played
4. TA from FM shall not be displayed while DAB service announcement is in progress
Title: FM PTY31 during DAB sevice announcement
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB and FM modulator(TRX) are connected to the system
5. Equivalent FM station is available for a DAB station
6. DAB landing screen is active
7. Streaming file having TA is streamed on the DAB modulator
Steps:
1. Select the browse option from DAB landing screen
2. Select the DAB station having Equivalent FM station
3. Wait for the service announcement from DAB station and select "Continue"
4. Generate the PTY31 from the FM modulator
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played
3. Service announcement from DAB shall be played
4. PTY31 from FM shall not be displayed while DAB service announcement is in progress |
107 | System shall be able to manage FM announcements (TA or PTY31) when Radio FM is listened. | Title: FM radio mute during Traffic announcement
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming (Station not from connected TRX. Use either Live or other modulator)
Steps:
1. Generate a Traffic announcement via FM modulator
2. Select "Continue" from the System screen
3. Dismiss the Traffic announcement or Wait till Traffic announcement is over
Expected Result:
1. Traffic announcement from FM shall be displayed on the System screen
2. Currently streaming FM station shall mute and Traffic announcement shall be played
3. FM station shall unmute and restore streaming
Title: Cancelling Traffic announcement during FM streaming
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Generate a Traffic announcement via TRX
2. Dismiss the Traffic announcement
Expected Result:
1. TA from FM shall be displayed on the System screen
2. Traffic announcement shall be dismissed. FM station shall continue streaming
Title: System shall support Traffic announcement
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Generate a Traffic announcement via TRX hardware
2. Press Continue on Traffic announcement popup
3. Dismiss the Traffic announcement
4. Repeat step-1 and wait for 5 seconds once TA is displayed on System
Expected Result:
1. Traffic announcement popup shall be displayed on System screen
2. Currently streaming FM station shall mute and Traffic announcement shall be played
3. Traffic announcement shall be dismissed. FM station shall unmute and continue playing
4. Currently streaming FM station shall mute and Traffic announcement shall be played
Title: System shall support PTY31
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Generate a PTY31 via TRX hardware
2. Press Continue on PTY31 popup
3. wait for PTY31 to finish
4. Repeat step-1 and wait for 5 seconds once PTY31 is displayed on System
Expected Result:
1. PTY31 popup shall be displayed on System screen
2. Currently streaming FM station shall mute and PTY31 shall be played
3. PTY31 shall be ended. FM station shall unmute and continue playing
4. FM station shall mute and PTY31 shall be played |
108 | System shall not allow user to disable PTY31. | Title: Dismiss button disabled for PTY31 during FM streaming
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Generate a PTY31 via TRX hardware
2. Press Continue on PTY31 popup
Expected Result:
1. PTY31 prompt shall be displayed on the screen.Dismiss button shall be in disabled state
2. Currently streaming FM station shall mute and PTY31 shall be heard. Dismiss button shall be disabled
Title: Dismiss button disabled for PTY31 during USB playback
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
7. USB device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch USB source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a PTY31 via TRX hardware
5. Press Continue on PTY31 popup
Expected Result:
1. Media screen shall be displayed
2. USB Media source shall be launched
3. Selected song shall be played
4. PTY31 prompt shall be displayed on the screen.Dismiss button shall be in disabled state
5. Currently playing USB media shall mute and PTY31 shall be heard. Dismiss button shall be disabled
Title: Dismiss button disabled for PTY31 during BT playback
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
7. BT device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch BT source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a PTY31 via TRX hardware
5. Press Continue on PTY31 pop
Expected Result:
1. Media screen shall be displayed
2. BT Media source shall be launched
3. Selected song shall be played
4. PTY31 prompt shall be displayed on the screen.Dismiss button shall be in disabled state
5. Currently playing BT media shall mute and PTY31 shall be heard. Dismiss button shall be disabled
Title: Dismiss button disabled for PTY31 during iPod playback
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
7. iPod device having valid audio files is connected to System
Steps:
1. Press Media icon from left side of Radio screen
2. Launch iPod source from MyDevice icon
3. Select List option and play a song from any library folder
4. Generate a PTY31 via TRX hardware
5. Press Continue on PTY31 popup
Expected Result:
1. Media screen shall be displayed
2. iPod Media source shall be launched
3. Selected song shall be played
4. PTY31 prompt shall be displayed on the screen.Dismiss button shall be in disabled state
5. Currently playing iPod media shall mute and PTY31 shall be heard. Dismiss button shall be disabled
Title: Dismiss button disabled for PTY31 during AM streaming
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM and FM Modulator (TRX) are connected to System
6. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Select AM source from the Band option
2. Select Browse option and select any station
3. Generate a PTY31 via TRX hardware
4. Press Continue on PTY31 popup
Expected Result:
1. AM landing screen shall be launched
2. Selected AM source shall be played
3. PTY31 prompt shall be displayed on the screen.Dismiss button shall be in disabled state
4. Currently streaming AM station shall mute and PTY31 shall be heard. Dismiss button shall be disabled
Title: Dismiss button disabled for PTY31 during DAB streaming
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB and FM Modulator (TRX) are connected to System
6. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Select DAB source from the Band option
2. Select Browse option and select any station
3. Generate a PTY31 via TRX hardware
4. Press Continue on PTY31 popup
Expected Result:
1. DAB landing screen shall be launched
2. Selected DAB source shall be played
3. PTY31 prompt shall be displayed on the screen.Dismiss button shall be in disabled state
4. Currently streaming DAB station shall mute and PTY31 shall be heard. Dismiss button shall be disabled
Title: Disable settings for PTY31
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
Steps:
1. Select Settings option from FM landing screen
2. Observe the settings options
Expected Result:
1. Radio settings screen shall be displayed
2. There shall not be any to settings option to disable PTY31 |
109 | System shall support Slideshow feature as part of the DAB features, without any additional configuration or user setting. | Title: BTN_Slideshow is enabled when DAB station provides slideshow
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB station providing slideshow feature is available in DAB station list
5. No additional configuration or setting is done for DAB Slideshow feature
6. DAB landing screen is active
Steps:
1. Select Browse option
2. Select DAB station providing slideshow from the list
Expected Result:
1. DAB station list should be displayed
2. BTN_Slideshow should be enabled in DAB landing screen |
110 | System shall support dynamic activation/de-activation of RDS services. | Title: Dynamic Activation& De-activation of RDS services
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. TRX011 is plugged with System and streaming is in progress from a valid station
Steps:
1. Set Radio Text for currently tuned station, on TRX011
2. Set a PS name for currently tuned station, on TRX011
3. De-activate RDS service (Radio Text and PS name) from TRX011
Expected Result:
1. Radio Text shall be displayed for currently tuned station, in FM landing screen
2. Station name shall display the set PS name from TRX011, in FM landing screen
3. Station name and Radio Text shall display as blank, in FM landing screen |
111 | The dual tuner variants of the system shall support DAB and DAB+ tuner sources.
Mono tuner variants shall not support DAB/DAB+. | Title: DAB station playback for dual-tuner variant
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. Streaming file having DAB station are streamed from Dektec
6. DAB landing screen is active
Steps:
1. Select Browse option from DAB Landing screen
2. Select any DAB station from the list
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played.
Title: DAB+ station playback for dual-tuner variant
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. Streaming file having DAB+ station are streamed from Dektec
6. DAB landing screen is active
Steps:
1. Select Browse option from DAB Landing screen
2. Select any DAB+ station from the list
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB+ station shall be played.
Title: DAB/DAB+ doesnot support for monotuner variant
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
Steps:
1. Select Radio application from the control bar
2. Select Band option from landing screen
Expected Result:
1. Radio application shall be launched.
2. DAB band shall not be displayed in the drop down |
112 | The method of showing Slideshow shall be defined in HMI specifications. | Title: Verify DAB Slideshow screen
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB station providing slideshow feature is available in DAB station list
5. DAB landing screen is active
Steps:
1. Select Browse option
2. Select DAB station providing slideshow from the list
3. Select BTN_Slideshow from RD003_Radio_DAB_Landing_Screen
Expected Result:
1. DAB station list should be displayed
2. Selected DAB station should start playing. RD003_Radio_DAB_Landing_Screen should be displayed and BTN_Slideshow should be enabled
3. RD019_Radio_DAB_Slideshow_Screen should be displayed and Slideshow should be started |
113 | The product shall support single tuner band for AM and FM each. | Title: Single Tuner Band is streaming
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
Steps:
1. Press Band option from AM landing screen
2. Launch FM source from Band selection screen
3. Press Seek next from FM landing screen
4. Press Band option and launch AM source
5. Press Seek next from AM landing screen
Expected Result:
1. Band Selection screen shall be displayed
2. FM landing screen shall be displayed
3. Next available station shall be played. Only FM band stations shall be played
4. AM landing screen shall be displayed
5. Next available station shall be played. Only AM band stations shall be played |
114 | The seek step of tuner Autoseek depends on the band (AM or FM) and the band configuration: BTEL_BROADCAST_RAD_AM_BA DOTE parameter for AM and BTEL_BROADCAST_RAD_FM_BA for FM.
(see table 2 for FM and table 6 for AM).
!Table2.PNG!
!Table6.PNG! | Title: AM Band Auto Seek Down when BROADCAST_AM_BAND = 001
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 001
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select a station from the list
3. Press Auto Seek_Previous arrow from AM landing screen
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Auto seek down shall start and previous station with step frequency decreased by 3k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: AM Band Auto Seek Up when BROADCAST_AM_BAND = 001
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 001
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select a station from the list
3. Press Auto Seek_Next arrow from AM landing screen
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Auto seek up shall start and next station with step frequency increased by 3k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: AM Band Auto Seek Down when BROADCAST_AM_BAND = 010
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 010
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select a station from the list
3. Press Auto Seek_Previous arrow from AM landing screen
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Auto seek down shall start and previous station with step frequency decreased by 9k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: AM Band Auto Seek Up when BROADCAST_AM_BAND = 010
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 010
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select a station from the list
3. Press Auto Seek_Next arrow from AM landing screen
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Auto seek up shall start and next station with step frequency increased by 9k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: AM Band Auto Seek Down when BROADCAST_AM_BAND = 011
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 011
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select a station from the list
3. Press Auto Seek_Previous arrow from AM landing screen
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Auto seek down shall start and previous station with step frequency decreased by 9k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking.
Title: AM Band Auto Seek Up when BROADCAST_AM_BAND = 011
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 011
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select a station from the list
3. Press Auto Seek_Next arrow from AM landing screen
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Auto seek up shall start and next station with step frequency increased by 9k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: AM Band Auto Seek Down when BROADCAST_AM_BAND = 100
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 100
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select a station from the list
3. Press Auto Seek_Previous arrow from AM landing screen
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Auto seek down shall start and previous station with step frequency decreased by 9k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: AM Band Auto Seek Up when BROADCAST_AM_BAND = 100
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 100
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select a station from the list
3. Press Auto Seek_Next arrow from AM landing screen
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Auto seek up shall start and next station with step frequency increased by 9k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: AM Band Auto Seek Down when BROADCAST_AM_BAND = 101
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 101
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select a station from the list
3. Press Auto Seek_Previous arrow from AM landing screen
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Auto seek down shall start and previous station with step frequency decreased by 10k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: AM Band Auto Seek Up when BROADCAST_AM_BAND = 101
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 101
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select a station from the list
3. Press Auto Seek_Next arrow from AM landing screen
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Auto seek up shall start and next station with step frequency increased by 10k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: AM Band Auto Seek Down when BROADCAST_AM_BAND = 110
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 110
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select a station from the list
3. Press Auto Seek_Previous arrow from AM landing screen
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Auto seek down shall start and previous station with step frequency decreased by 10k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: AM Band Auto Seek Up when BROADCAST_AM_BAND = 110
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 110
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select a station from the list
3. Press Auto Seek_Next arrow from AM landing screen
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Auto seek up shall start and next station with step frequency increased by 10k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: AM Band Auto Seek Down when LW BROADCAST_AM_BAND = 111
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 111
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select a station from the list
3. Press Auto Seek_Previous arrow from AM landing screen
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Auto seek down shall start and previous stations with step frequency decreased by 3k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: AM Band Auto Seek Up when LW BROADCAST_AM_BAND = 111
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 111
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select a station from the list
3. Press Auto Seek_Next arrow from AM landing screen
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Auto seek up shall start and next stations with step frequency increased by 3k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: AM Band Auto Seek Down when MW BROADCAST_AM_BAND = 111
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 111
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select a station from the list
3. Press Auto Seek_Previous arrow from AM landing screen
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Auto seek down shall start and previous station with step frequency decreased by 9k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: AM Band Auto Seek Up when MW BROADCAST_AM_BAND = 111
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 111
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select a station from the list
3. Press Auto Seek_Next arrow from AM landing screen
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Auto seek up shall start and next station with step frequency increased by 9k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: FM Band Auto Seek Down when BROADCAST_FM_BAND = 001
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 001
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select a station from the list
3. Press Auto Seek_Previous arrow from FM landing screen
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Auto seek down shall start and previous station with step frequency decreased by 100k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: FM Band Auto Seek Up when BROADCAST_FM_BAND = 001
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 001
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select a station from the list
3. Press Auto Seek_Next arrow from FM landing screen
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Auto seek up shall start and next station with step frequency increased by 100k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: FM Band Auto Seek Down when BROADCAST_FM_BAND = 011
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 011
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select a station from the list
3. Press Auto Seek_Previous arrow from FM landing screen
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Auto seek down shall start and previous station with step frequency decreased by 200k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: FM Band Auto Seek Up when BROADCAST_FM_BAND = 011
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 011
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select a station from the list
3. Press Auto Seek_Next arrow from FM landing screen
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Auto seek up shall start and next station with step frequency increased by 200k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: FM Band Auto Seek Down when BROADCAST_FM_BAND = 100
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 100
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select a station from the list
3. Press Auto Seek_Previous arrow from FM landing screen
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Auto seek down shall start and previous station with step frequency decreased by 100k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: FM Band Auto Seek Up when BROADCAST_FM_BAND = 100
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 100
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select a station from the list
3. Press Auto Seek_Next arrow from FM landing screen
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Auto seek up shall start and next station with step frequency increased by 100k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: FM Band Auto Seek Down when BROADCAST_FM_BAND = 010
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 010
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select a station from the list
3. Press Auto Seek_Previous arrow from FM landing screen
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Auto seek down shall start and previous station with step frequency decreased by 100k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: FM Band Auto Seek Up when BROADCAST_FM_BAND = 010
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 010
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select a station from the list
3. Press Auto Seek_Next arrow from FM landing screen
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Auto seek up shall start and next station with step frequency increased by 100k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: FM Band Auto Seek Down when BROADCAST_FM_BAND = 101
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 101
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select a station from the list
3. Press Auto Seek_Previous arrow from FM landing screen
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Auto seek down shall start and previous station with step frequency decreased by 250k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: FM Band Auto Seek Up when BROADCAST_FM_BAND = 101
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 101
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select a station from the list
3. Press Auto Seek_Next arrow from FM landing screen
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Auto seek up shall start and next station with step frequency increased by 250k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: FM Band Auto Seek Down when BROADCAST_FM_BAND = 110
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 110
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select a station from the list
3. Press Auto Seek_Previous arrow from FM landing screen
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Auto seek down shall start and previous station with step frequency decreased by 100k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: FM Band Auto Seek Up when BROADCAST_FM_BAND = 110
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 110
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select a station from the list
3. Press Auto Seek_Next arrow from FM landing screen
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Auto seek up shall start and next station with step frequency increased by 100k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: FM Band Auto Seek Down when BROADCAST_FM_BAND = 111
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 111
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select a station from the list
3. Press Auto Seek_Previous arrow from FM landing screen
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Auto seek down shall start and previous station with step frequency decreased by 200k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
Title: FM Band Auto Seek Up when BROADCAST_FM_BAND = 111
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 111
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select a station from the list
3. Press Auto Seek_Next arrow from FM landing screen
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Auto seek up shall start and next station with step frequency increased by 200k shall be tuned. 'Seeking..' shall be displayed instead of station name and station frequency
will be changed continuously according to seeking |
115 | The station name shall be of maximum 8 alphanumeric characters. | Title: Maximum characters for Station name
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. TRX011 is plugged with System and streaming is in progress from a valid station
Steps:
1. Set PS name to more than 8 alphanumeric characters for currently tuned station, on TRX011
2. Select Browse option from FM Landing screen
Expected Result:
1. Station name shall display only maximum 8 alphanumeric characters of set PS name from TRX011, in FM landing screen
2. Station name shall display only maximum 8 alphanumeric characters of set PS name from TRX011, in station list |
116 | The system does not support animated images (like GIF or APNG). | Title: System not support animated images like GIF
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB landing screen is active
5. Streaming file having DAB station are streamed from Dektec
Steps:
1. Select Browse option
2. Select DAB station providing slideshow from the list
3. Press on slideshow button from HMI
Expected Result:
1. DAB station list should be displayed
2. System should play selected DAB station & BTN_Slideshow should be enable in DAB landing screen for strong signal received
3. System should not support animated images like GIF
Title: System not support animated images like APNG
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB landing screen is active
5. Streaming file having DAB station are streamed from Dektec
Steps:
1. Select Browse option
2. Select DAB station providing slideshow from the list
3. Press on slideshow button from HMI
Expected Result:
1. DAB station list should be displayed
2. System should play selected DAB station & BTN_Slideshow should be enable in DAB landing screen for strong signal received
3. System should not animated images like Animated PNG |
117 | The system shall Enable / Disable FM announcement feature according to configuration provided by BTEL_BROADCAST_TA DOTE parameter only when BTEL_BROADCAST_RAD_FM_BA DOTE parameter is not disabled (BTEL_BROADCAST_RAD_FM_BA != disable).Â
- if BTEL_BROADCAST_TA = Disable (announcement shall not be detected ) : all the FM announcements (TA & PTY31) shall be ignored.
- if BTEL_BROADCAST_TA = Enable (announcement shall be detected and notified ) : all the FM PTY31 announcements will be served, TA detection will be depending on user settings. | Title: DOTE parameters for FM Traffic Announcements Broadcast - Disable FM Traffic Announcements
Preconditions:
1. Vehicle battery (Vbat) is ON
2. Ignition = ON
3. Canoe is connected to System
4. System is in Full Run mode
5. Security Access for Variant coding is enabled
6. BTEL_BROADCAST TA_000 is set to "Enable"
Steps:
1. Go to Diagnostic Console
2.Go to Engineering Datas
3. Select 2E 21 00 Service
4. Set BTEL_BROADCAST TA_000 to "DISABLE" and Execute 2E 21 00 SERVICE
5. Perform Sleep Cycle
6. Turn OFF FM Traffic Announcements option from radio settings.
Expected Result:
1. Diagnostic console should be opened
2. Engineering Datas section should be opened
3. 2E 21 00 Service With availabe services should be displayed
4. 2E 21 00 Service should be executed and BTEL_BROADCAST TA_000 should be set "DISABLE"
5. Sleep cycle should be completed and system should Wake Up
6. FM Traffic Announcements option should be dissappear from Radio settings screen
Title: DOTE parameters for FM Traffic Announcements Broadcast - Enable FM Traffic Announcements
Preconditions:
1. Vehicle battery (Vbat) is ON
2. Ignition = ON
3. Canoe is connected to System
4. System is in Full Run mode
5. Security Access for Variant coding is enabled
6. BTEL_BROADCAST TA_000 is set to "Disable"
Steps:
1. Go to Diagnostic Console
2.Go to Engineering Datas
3. Select 2E 21 00 Service
4. Set BTEL_BROADCAST TA_000 to "DISABLE" and Execute 2E 21 00 SERVICE
5. Perform Sleep Cycle
6. Turn ON FM Traffic Announcements option from radio settings.
Expected Result:
1. Diagnostic console should be opened
2. Engineering Datas section should be opened
3. 2E 21 00 Service With availabe services should be displayed
4. 2E 21 00 Service should be executed and BTEL_BROADCAST TA_000 should be set "DISABLE"
5. Sleep cycle should be completed and system should Wake Up
6. FM Traffic Announcements option should be displayed in Radio settings screen |
118 | The system shall abort the seek if the user presses any button except volume up/down and mute. | Title: Auto seek operation for DAB remains continued when Volume Up button is pressed
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active.
Steps:
1. Long press on next seek arrow to perform Auto seek.
2. Press Volume Up button.
Expected Result:
1. Auto seek shall be in progress.
2. Auto seek operation shall be continued and volume shall be increased.
Title: Auto seek operation for DAB remains continued when Volume Down button is pressed
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active.
Steps:
1. Long press on next seek arrow to perform Auto seek.
2. Press Volume Down button.
Expected Result:
1. Auto seek shall be in progress.
2. Auto seek operation shall be continued and volume shall be decreased.
Title: Auto seek operation for DAB remains continued when Mute button is pressed
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active.
Steps:
1. Long press on next seek arrow to perform Auto seek.
2. Press Mute button.
Expected Result:
1. Auto seek shall be in progress.
2. Auto seek operation shall be continued and volume shall be muted. |
119 | The system shall allow the user to abort the on-going seek operation. | Title: For DAB band Seek operation is cancelled when seek up button is pressed
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active.
Steps:
1. Long press on next seek arrow to perform Auto seek.
2. Press next seek arrow while auto seek is in progress.
Expected Result:
1. Auto seek shall be in progress.
2. Auto seek shall be aborted.
Title: For DAB band Seek operation is cancelled when seek down button is pressed
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active.
Steps:
1. Long press on next seek arrow to perform Auto seek.
2. Press previous seek arrow while auto seek is in progress.
Expected Result:
1. Auto seek shall be in progress.
2. Auto seek shall be aborted. |
120 | The system shall allow the user to browse through the station list without impacting the currently tuned station. | Title: DAB station list is scrolled without impacting the currently tuned station.
Preconditions:
- System is up and running
- DAB antenna is plugged to tuner
- DAB landing screen is active.
Steps:
1.Play any valid 5A 176.640 MHz DAB station.
2.Select 'Station List Browse' icon, from DAB landing screen
3.Scroll up the DAB station list.
Expected Result:
1.5A 174.640 MHz DAB station shall be playing.
2.DAB station list screen shall be launched without any issues.
3.DAB station list shall be scrolled without impacting the currently tuned station.
Title: DAB station can be selected form the list of available DAB station list
Preconditions:
- System is up and running
- DAB antenna is plugged to tuner
- DAB landing screen is active.
Steps:
1.Select 'Station List Browse' icon, from DAB landing screen
2.Select any listed DAB station
Expected Result:
1.DAB station list screen shall be launched without any issues.
2.Selected DAB station shall be played without any issues. |
121 | The system shall allow the user to cancel the ongoing station list update. | Title: "Cancel" option is available to cancel ongoing DAB station list update
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active.
Steps:
1. Select 'Station List Browse' icon and wait till DAB station list is displayed on screen.
3. Select 'Refresh' option to manually update the station list.
Expected Result:
1. The station list shall be displayed.
2. "Cancel" option shall be displayed on screen to cancel ongoing DAB station list update. |
122 | The system shall allow the user to manually request an update of the current band Station List. | Title: DAB station list is manually updated on selecting 'Refresh' option
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active.
- Attenuator is Plugged.
Steps:
1. Select 'Station List Browse' icon.
2. Wait till DAB station list is displayed on screen and select 'Refresh' option.
3. Increase attenuator value to decrease signal quality.
4. Wait till updated DAB station list is displayed on screen.
Expected Result:
1. Station list shall be displayed.
2. The updated station list shall be displayed.
3. Sound with a noise shall be heard.
4. The updated DAB station list shall be displayed on the screen.
Title: "Station list updating..." message is displayed when DAB station list is manually updated.
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active.
Steps:
1. Select 'Station List Browse' icon and wait till DAB station list is displayed on screen.
2. Select 'Refresh' option.
Expected Result:
1. The station list shall be displayed.
2. "Station list updating..." message shall be displayed on screen when DAB station list shall be manually updated. |
123 | The system shall allow the user to replace a station from the preset list.
(see HMI specifications for details) | Title: Preset is replaced from Preset List
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active.
- Preset2 is set to 5C 178.352 MHz.
Steps:
1.Select Preset2.
2.Tune to 6C 185.360 MHz frequency.
3.Long press 6C 185.360 MHz frequency.
Expected Result:
1.Preset2 shall be selected.
2.6C 185.360 MHz frequency shall be playing.
3.Preset2 shall be replaced with 6C 185.360 MHz frequency multiplex. |
124 | The system shall allow the user to save the currently tuned station as a preset for the DAB tuner source. | Title: User can able to store currently tuned station to preset for DAB tuner
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active and any DAB station is playing.
Steps:
1. Long press on preset number to add currently tuned station into Preset list.
Expected Result:
1. Currently tuned station shall be stored as a preset. |
125 | The system shall allow the user to select a station from station list to tune it. | Title: DAB station can be selected form the list of available DAB station list
Preconditions:
- System is up and running
- DAB antenna is plugged to tuner
- DAB landing screen is active.
Steps:
1.Select 'Station List Browse' icon, from DAB landing screen
2.Select any listed DAB station
Expected Result:
1.DAB station list screen shall be launched without any issues.
2.Selected DAB station shall be played without any issues. |
126 | The system shall allow the user to select preset for the DAB source. | Title: DAB tuner is tuned to selected station from preset list
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB screen is active and few presets are added in DAB preset list.
Steps:
1. Select any station from preset list.
Expected Result:
1. Selected preset station shall start playing. |
127 | The system shall allow the user to turn ON / OFF the DAB to FM seamless option. | Title: DAB to FM seamless setting to 'ON'
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB landing screen is active
6. DAB to FM handover setting is set to 'OFF'
Steps:
1. Select Settings option from DAB landing screen
2. Turn ON DAB to FM handover settings option
Expected Result:
1. Radio settings screen shall be displayed
2. DAB to FM handover setting shall be set to 'ON'
Title: DAB to FM seamless setting to 'OFF'
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB landing screen is active
6. DAB to FM handover setting is set to 'ON'
Steps:
1. Select Settings option from DAB landing screen
2. Turn OFF DAB to FM handover settings option
Expected Result:
1. Radio settings screen shall be displayed
2. DAB to FM handover setting shall be set to 'OFF'
Title: DAB to FM seamless settings 'ON' persistency
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB landing screen is active
6. DAB to FM handover setting is set to 'OFF'
Steps:
1. Select Settings option from DAB landing screen
2. Turn ON DAB to FM handover settings option
3. Press Home button from control bar
4. Press Radio button from control bar
5. Select Settings option from DAB landing screen
Expected Result:
1. Radio settings screen shall be displayed
2. DAB to FM handover setting shall be set to 'ON'
3. Home screen shall be displayed
4. Radio application shall be displayed
5. Radio settings screen shall be displayed and DAB to FM handover setting shall remain 'ON'
Title: DAB to FM seamless settings 'OFF' persistency
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB landing screen is active
6. DAB to FM handover setting is set to 'ON'
Steps:
1. Select Settings option from DAB landing screen
2. Turn OFF DAB to FM handover settings option
3. Press Home button from control bar
4. Press Radio button from control bar
5. Select Settings option from DAB landing screen
Expected Result:
1. Radio settings screen shall be displayed
2. DAB to FM handover setting shall be set to 'OFF'
3. Home screen shall be displayed
4. Radio application shall be displayed
5. Radio settings screen shall be displayed and DAB to FM handover setting shall remain 'OFF' |
128 | The system shall be able to decode information on music titles or details of the program available from DAB data and display it on HMI.Â
If the system decodes a character not available in system font, it shall replace it by a character “Spaceâ€. | Title: Station metadata display - Supported character font
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. Streaming file having Station informations available in system font (As per design document (Figma)) are streamed
6. DAB landing screen is active
Steps:
1. Select Browse option from DAB Landing screen
2. Select the DAB station from the list
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played. Station information's(Station name) shall be displayed on the HMI without any issue
Title: Station metadata display - Unsupported character font
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. Streaming file having Station information not available in system font (As per design document (Figma)) are streamed
6. DAB landing screen is active
Steps:
1. Select Browse option from DAB Landing screen
2. Select the DAB station from the list
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played. Station information data not in system font shall be displayed as "Spaces" on the HMI |
129 | The system shall be able to decode the short station name upto 8 characters and save it as preset.
Â
 | Title: Verify DAB preset include 8 characters even if station name is longer
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active.
- Current Station name is 16 character length.
Steps:
1.Long press on preset number to add currently tuned station into Preset list.
Expected Result:
1.Station name up to 8 characters shall be displayed for added preset. |
130 | The system shall be able to decode the station name upto 16 characters. | Title: Station name : upto 16 characters.
Preconditions:
1. System is up and running.
2. DAB antenna is plugged to tuner.
3. DAB landing screen is active.
Steps:
1. Tune to 5A 174.928 DAB frequency and check the the number of characters of station name.
Expected Result:
1. 5A 174.928 DAB station will be playing and station name will be of maximum 16 characters. |
131 | The system shall be able to detect and play PTY31 (Program Type for Emergency). | Title: System shall support PTY31
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM Modulator (TRX) is connected to System
6. TA is enabled in radio settings
7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator)
Steps:
1. Generate a PTY31 via TRX hardware
2. Press Continue on PTY31 popup
3. wait for PTY31 to finish
4. Repeat step-1 and wait for 5 seconds once PTY31 is displayed on System
Expected Result:
1. PTY31 popup shall be displayed on System screen
2. Currently streaming FM station shall mute and PTY31 shall be played
3. PTY31 shall be ended. FM station shall unmute and continue playing
4. FM station shall mute and PTY31 shall be played |
132 | The system shall be able to refresh the Slideshow at least every 10 seconds.
Note: if station refreshes its slideshow at an higher frequency, some images may be ignored or postponed | Title: System refreshes Slideshow atleast every 10 seconds
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB station providing slideshow feature is available in DAB station list
5. DAB landing screen is active
Steps:
1. Select Browse option
2. Select DAB station providing slideshow from the list
3. Select BTN_Slideshow from RD003_Radio_DAB_Landing_Screen
Expected Result:
1. DAB station list should be displayed
2. Selected DAB station should start playing
3. Slideshow should be started and Image should be refreshed atleast every 10 seconds |
133 | The system shall be able to restore DAB tuner default values through factory reset. | Title: Default State for DAB Service Announcements setting when previously set to ON
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB landing screen is active
6. DAB Service Announcements setting is set to 'OFF'
Steps:
1. Select Settings option from DAB landing screen
2. Turn ON DAB Service Announcements settings option
3. Perform Factory Reset from Settings application
4. Select Radio application from Home screen
5. Launch DAB source from Band option
6. Select Settings option from DAB landing screen and observe DAB Service Announcements setting
Expected Result:
1. Radio settings screen shall be displayed
2. DAB Service Announcements setting shall be set to 'ON'
3. Factory Reset has been successfully performed
4. Radio application shall be displayed
5. DAB landing screen shall be displayed
6. Radio settings screen shall be displayed and by default DAB Service Announcements setting option shall be set to 'OFF'
Title: Default State for DAB Service Announcements setting when previously set to OFF
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB landing screen is active
6. DAB Service Announcements setting is set to 'ON'
Steps:
1. Select Settings option from DAB landing screen
2. Turn OFF DAB Service Announcements settings option
3. Perform Factory Reset from Settings application
4. Select Radio application from Home screen
5. Launch DAB source from Band option
6. Select Settings option from DAB landing screen and observe DAB Service Announcements setting
Expected Result:
1. Radio settings screen shall be displayed
2. DAB Service Announcements setting shall be set to 'OFF'
3. Factory Reset has been successfully performed
4. Radio application shall be displayed
5. DAB landing screen shall be displayed
6. Radio settings screen shall be displayed and by default DAB Service Announcements setting option shall be set to 'OFF'
Title: Default State for Radio Text (RT) setting when previously set to OFF
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB landing screen is active
6. Radio Text (RT) setting is set to 'ON'
Steps:
1. Select Settings option from DAB landing screen
2. Turn OFF Radio Text (RT) setting option
3. Perform Factory Reset from Settings application
4. Select Radio application from Home screen
5. Launch DAB source from Band option
6. Select Settings option from DAB landing screen and observe Radio Text (RT) setting
Expected Result:
1. Radio settings screen shall be displayed
2. Radio Text (RT) setting shall be set to 'OFF'
3. Factory Reset has been successfully performed
4. Radio application shall be displayed
5. DAB landing screen shall be displayed
6. Radio settings screen shall be displayed and by default Radio Text (RT) setting option shall be set to 'ON'
Title: Default State for Radio Text (RT) setting when previously set to ON
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB landing screen is active
6. Radio Text (RT) setting is set to 'ON'
Steps:
1. Select Settings option from DAB landing screen
2. Turn OFF Radio Text (RT) setting option
3. Perform Factory Reset from Settings application
4. Select Radio application from Home screen
5. Launch DAB source from Band option
6. Select Settings option from DAB landing screen and observe Radio Text (RT) setting
Expected Result:
1. Radio settings screen shall be displayed
2. Radio Text (RT) setting shall be set to 'OFF'
3. Factory Reset has been successfully performed
4. Radio application shall be displayed
5. DAB landing screen shall be displayed
6. Radio settings screen shall be displayed and by default Radio Text (RT) setting option shall be set to 'ON'
Title: Default State for DAB to FM seamless setting when previously set to ON
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB landing screen is active
6. DAB to FM handover setting is set to 'OFF'
Steps:
1. Select Settings option from DAB landing screen
2. Turn ON DAB to FM handover settings option
3. Perform Factory Reset from Settings application
4. Select Radio application from Home screen
5. Launch DAB source from Band option
6. Select Settings option from DAB landing screen and observe DAB to FM handover setting
Expected Result:
1. Radio settings screen shall be displayed
2. DAB to FM handover setting shall be set to 'ON'
3. Factory Reset has been successfully performed
4. Radio application shall be displayed
5. DAB landing screen shall be displayed
6. Radio settings screen shall be displayed and by default DAB to FM handover setting option shall be set to 'ON'
Title: Default State for DAB to FM seamless setting when previously set to OFF
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB landing screen is active
6. DAB to FM handover setting is set to 'ON'
Steps:
1. Select Settings option from DAB landing screen
2. Turn OFF DAB to FM handover settings option
3. Perform Factory Reset from Settings application
5. Select Radio application from Home screen
6. Launch DAB source from Band option
7. Select Settings option from DAB landing screen and observe DAB to FM handover setting
Expected Result:
1. Radio settings screen shall be displayed
2. DAB to FM handover setting shall be set to 'OFF'
3. Factory Reset has been successfully performed
4. Radio application shall be displayed
5. DAB landing screen shall be displayed
6. Radio settings screen shall be displayed and by default DAB to FM handover setting option shall be set to 'ON'
|
134 | The system shall be able to retain the station list across operating modes. | Title: DAB station list persistency during transition from Full Run to One Hour Mode
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. DAB landing screen is active
Steps:
1. Select the Browse option from the DAB landing screen
2. Send the CAN signal KEY_POS to 3 ( ACC )
Expected Result:
1. DAB station list shall be displayed
2. System shall enter in One Hour mode and previous DAB station list shall persisted after the transition
Title: DAB station list persistency during transition from Full Run to Extended Mode
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. DAB landing screen is active
Steps:
1. Select the Browse option from the DAB landing screen
2. Send the CAN signal KEY_POS to 0 ( STOP)
Expected Result:
1. DAB station list shall be displayed
2. System shall enter in Extended Mode and previous DAB station list shall persisted after the transition
Title: DAB station list persistency during transition from One hour to Extended Mode
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in One Hour Mode(KEY_POS to 3 ( ACC ))
4. DAB Modulator is available and connected to the system
5. DAB landing screen is active
Steps:
1. Select the Browse option from the DAB landing screen
2. Send the CAN signal KEY_POS to 0 ( STOP)
Expected Result:
1. DAB station list shall be displayed
2. System shall enter in Extended Mode and previous DAB station list shall persisted after the transition
Title: DAB station list persistency during transition from One hour to Full Run mode
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in One Hour Mode(KEY_POS to 3 ( ACC ))
4. DAB Modulator is available and connected to the system
5. DAB landing screen is active
Steps:
1. Select the Browse option from the DAB landing screen
2. Send the CAN signal KEY_POS to 1 ( Contact)
Expected Result:
1. DAB station list shall be displayed
2. System shall enter in Full Run Mode and previous DAB station list shall persisted after the transition
Title: DAB station list persistency during transition from Extended to Full Run mode
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Extended Mode(KEY_POS to 0 ( STOP))
4. DAB Modulator is available and connected to the system
5. DAB landing screen is active
Steps:
1. Select the Browse option from the DAB landing screen
2. Send the CAN signal KEY_POS to 1 ( Contact)
Expected Result:
1. DAB station list shall be displayed
2. System shall enter in Full Run Mode and previous DAB station list shall persisted after the transition
Title: DAB station list persistency during transition from Extended to One Hour Mode
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Extended Mode(KEY_POS to 0 ( STOP))
4. DAB Modulator is available and connected to the system
5. DAB landing screen is active
Steps:
1. Select the Browse option from the DAB landing screen
2. Send the CAN signal KEY_POS to 3 ( ACC )
Expected Result:
1. DAB station list shall be displayed
2. System shall enter in One Hour Mode and previous DAB station list shall persisted after the transition |
135 | The system shall be able to store 18 presets. | Title: For DAB tuner 18 presets can be stored
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- 17 Present are already present in the system
- DAB landing screen is active and 9A 202.928 MHz DAB station is playing.
Steps:
1.Long press on 18th position in preset list to add station into preset list.
Expected Result:
1.18th presets shall be stored in preset list. |
136 | The system shall be able to tune to the user selected preset station. | Title: DAB tuner is tuned to selected station from preset list
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB screen is active and few presets are added in DAB preset list.
Steps:
1. Select any station from preset list.
Expected Result:
1. Selected preset station shall start playing. |
137 | The system shall detect PTY31 whatever the played source (radio or Media) in less than 500 ms. (KPI) | Title: System detects PTY31 within 500 ms, when USB audio playback is in progress
Preconditions:
1. Vehicle battery (Vbat) is ON.
2. Ignition = ON.
3. Home screen appear
4. FM/AM signal simulator is connected with IVI
5. USB is connected with system & audio playback is in progress
6. USB audio playback screen is active
Steps:
1.Trigger PTY31 from simulator
Expected Result:
1. USB audio playback should be pause, PTY31 should be audible and Radio service announcement pop up should be displayed on HMI within 500ms
Title: System detects PTY31 within 500 ms, when iPod audio playback is in progress
Preconditions:
1. Vehicle battery (Vbat) is ON.
2. Ignition = ON.
3. Home screen appear
4. FM/AM signal simulator is connected with IVI
5. iPod is connected with system & audio playback is in progress
6. iPod audio playback screen is active
Steps:
1.Trigger PTY31 from simulator
Expected Result:
1. iPod audio playback should be pause, PTY31 should be audible and Radio service announcement pop up should be displayed on HMI within 500ms
Title: System detects PTY31 within 500 ms, when BT audio playback is in progress
Preconditions:
1. Vehicle battery (Vbat) is ON.
2. Ignition = ON.
3. Home screen appear
4. FM/AM signal simulator is connected with IVI
5. BT is connected with system & audio playback is in progress
6. BT audio playback screen is active
Steps:
1.Trigger PTY31 from simulator
Expected Result:
1. BT audio playback should be pause, PTY31 should be audible and Radio service announcement pop up should be displayed on HMI within 500ms
Title: System detects PTY31 within 500 ms, when Wireless AA audio playback is in progress
Preconditions:
1. Vehicle battery (Vbat) is ON.
2. Ignition = ON.
3. Home screen appear
4. FM/AM signal simulator is connected with IVI
5. Wireless AA is connected with system & audio playback is in progress
6. Wireless AA audio playback screen is active
Steps:
1.Trigger PTY31 from simulator
Expected Result:
1. Wireless AA audio playback should be pause, PTY31 should be audible and Radio service announcement pop up should be displayed on HMI within 500ms
Title: System detects PTY31 within 500 ms, when Wireless CP audio playback is in progress
Preconditions:
1. Vehicle battery (Vbat) is ON.
2. Ignition = ON.
3. Home screen appear
4. FM/AM signal simulator is connected with IVI
5. Wireless CP is connected with system & audio playback is in progress
6. Wireless CP audio playback screen is active
Steps:
1.Trigger PTY31 from simulator
Expected Result:
1. Wireless CP audio playback should be pause, PTY31 should be audible and Radio service announcement pop up should be displayed on HMI within 500ms
Title: System detects PTY31 within 500 ms, when Wired AA audio playback is in progress
Preconditions:
1. Vehicle battery (Vbat) is ON.
2. Ignition = ON.
3. Home screen appear
4. FM/AM signal simulator is connected with IVI
5. Wireless AA is connected with system & audio playback is in progress
6. Wireless AA audio playback screen is active
Steps:
1.Trigger PTY31 from simulator
Expected Result:
1. Wireless AA audio playback should be pause, PTY31 should be audible and Radio service announcement pop up should be displayed on HMI within 500ms
Title: System detects PTY31 within 500 ms, when Wired CP audio playback is in progress
Preconditions:
1. Vehicle battery (Vbat) is ON.
2. Ignition = ON.
3. Home screen appear
4. FM/AM signal simulator is connected with IVI
5. Wired CP is connected with system & audio playback is in progress
6. Wired CP audio playback screen is active
Steps:
1.Trigger PTY31 from simulator
Expected Result:
1. Wired CP audio playback should be pause, PTY31 should be audible and Radio service announcement pop up should be displayed on HMI within 500ms |
138 | The system shall detect traffic announcements whatever the played source (Radio or Media) in less than 500 ms. (KPI) | Title: System detects TA within 500 ms, when USB audio playback is in progress
Preconditions:
1. Vehicle battery (Vbat) is ON.
2. Ignition = ON.
3. Home screen appear
4. FM/AM signal simulator is connected with IVI
5. USB is connected with system & audio playback is in progress
6. USB audio playback screen is active
Steps:
1.Trigger TA from simulator
Expected Result:
1. USB audio playback should be pause, TA should be audible and Radio service announcement pop up should be displayed on HMI within 500ms
Title: System detects TA within 500 ms, when iPod audio playback is in progress
Preconditions:
1. Vehicle battery (Vbat) is ON.
2. Ignition = ON.
3. Home screen appear
4. FM/AM signal simulator is connected with IVI
5. iPod is connected with system & audio playback is in progress
6. iPod audio playback screen is active
Steps:
1.Trigger TA from simulator
Expected Result:
1. iPod audio playback should be pause, TA should be audible and Radio service announcement pop up should be displayed on HMI within 500ms
Title: System detects TA within 500 ms, when BT audio playback is in progress
Preconditions:
1. Vehicle battery (Vbat) is ON.
2. Ignition = ON.
3. Home screen appear
4. FM/AM signal simulator is connected with IVI
5. BT is connected with system & audio playback is in progress
6. BT audio playback screen is active
Steps:
1.Trigger TA from simulator
Expected Result:
1. BT audio playback should be pause, TA should be audible and Radio service announcement pop up should be displayed on HMI within 500ms
Title: System detects TA within 500 ms, when Wireless AA audio playback is in progress
Preconditions:
1. Vehicle battery (Vbat) is ON.
2. Ignition = ON.
3. Home screen appear
4. FM/AM signal simulator is connected with IVI
5. Wireless AA is connected with system & audio playback is in progress
6. Wireless AA audio playback screen is active
Steps:
1.Trigger TA from simulator
Expected Result:
1. Wireless AA audio playback should be pause, TA should be audible and Radio service announcement pop up should be displayed on HMI within 500ms
Title: System detects TA within 500 ms, when Wireless CP audio playback is in progress
Preconditions:
1. Vehicle battery (Vbat) is ON.
2. Ignition = ON.
3. Home screen appear
4. FM/AM signal simulator is connected with IVI
5. Wireless CP is connected with system & audio playback is in progress
6. Wireless CP audio playback screen is active
Steps:
1.Trigger TA from simulator
Expected Result:
1. Wireless CP audio playback should be pause, TA should be audible and Radio service announcement pop up should be displayed on HMI within 500ms
Title: System detects TA within 500 ms, when Wired AA audio playback is in progress
Preconditions:
1. Vehicle battery (Vbat) is ON.
2. Ignition = ON.
3. Home screen appear
4. FM/AM signal simulator is connected with IVI
5. Wireless AA is connected with system & audio playback is in progress
6. Wireless AA audio playback screen is active
Steps:
1.Trigger TA from simulator
Expected Result:
1. Wireless AA audio playback should be pause, TA should be audible and Radio service announcement pop up should be displayed on HMI within 500ms
Title: System detects TA within 500 ms, when Wired CP audio playback is in progress
Preconditions:
1. Vehicle battery (Vbat) is ON.
2. Ignition = ON.
3. Home screen appear
4. FM/AM signal simulator is connected with IVI
5. Wired CP is connected with system & audio playback is in progress
6. Wired CP audio playback screen is active
Steps:
1.Trigger TA from simulator
Expected Result:
1. Wired CP audio playback should be pause, TA should be audible and Radio service announcement pop up should be displayed on HMI within 500ms |
139 | The system shall display station icon as of part of the current service information data. | Title: Station icon is displayed on DAB Radio screen
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active and valid station is tuned.
Steps:
1. Observe icon on left side of Station information.
Expected Result:
1. Station icon shall be displayed on DAB radio screen on left side of Station information. |
140 | The system shall display the Slideshow in a 320x240 pixels area. | Title: System display Slideshow in 320x240 pixels area.
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB landing screen is active
5. Streaming file having DAB station are streamed from Dektec
Steps:
1. Select Browse option
2. Select DAB station providing slideshow from the list
3. Press on slideshow button from HMI
Expected Result:
1. DAB station list should be displayed
2. System should play selected DAB station & BTN_Slideshow should be enable in DAB landing screen for strong signal received
3. System should display the Slideshow in a 320x240 pixels area.
Title: System not support if more than 320x240 pixels area.
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB landing screen is active
5. Streaming file having DAB station are streamed from Dektec
Steps:
1. Select Browse option
2. Select DAB station providing slideshow from the list
3. Press on slideshow button from HMI
Expected Result:
1. DAB station list should be displayed
2. System should play selected DAB station & BTN_Slideshow should be enable in DAB landing screen for strong signal received
3. System should display the Slideshow in a 320x240 pixels area. Ie system shall not stretch or rescale image provided by station. |
141 | The system shall display the station information provided by the tuner containing multiplex name, station name, station icon and DLS (if available). | Title: Verify station information for tuned frequency station
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active.
Steps:
1. Tuned to 5A 174.928 MHz freq station.
Expected Result:
1. Service name(DAB/DAB+), multiplex name, station name, and PTY information (if available) shall be displayed for tuned DAB frequency station. |
142 | The system shall highlight the preset if the current selected station is associated to a preset. | Title: System indicates currently selected DAB station is marked as preset
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- Few DAB stations are added as preset.
Steps:
1. Play DAB station available in Preset list.
Expected Result:
1. System shall indicate currently selected DAB station shall be marked as preset. |
143 | The system shall identify the valid station based on the signal strength and SNR. | Title: Station List Update during Attenuation
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. Attenuator is connected between the DAB Modulator and System
6. Attenuation level is set to zero
7. DAB to FM handover setting is set to 'OFF'
8. DAB landing screen is active
Steps:
1. Select the Browse option from the DAB landing screen
2. Increase the attenuation to 10dB and count the number of available stations
3. Repeat the step2 for other attenuation levels
Expected Result:
1. DAB station list shall be displayed
2. Station list shall be updated accordingly
3. Station list shall be decreased during each attenuation level |
144 | The system shall include only the stations that meet the quality_threshold criterias in the station list.
Note: There will not be duplicate station in station list. | Title: Station list update based on Signal quality
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator 1 is available and connected to the system
5. Attenuator is connected between the DAB Modulator 1 and System
6. DAB Modulator-2 is available and connected to the system
7. Attenuation level is set to zero
8. DAB to FM handover setting is set to 'OFF'
9. DAB landing screen is active
Steps:
1. Select Browse option from DAB Landing screen
2. Increase the attenuation to reduce the dab signal strength below Qulaity-Threshold (TBD)
Expected Result:
1. DAB station list shall be displayed with all available stations (Stations from both modulator1 and modulator2)
2. Station having the quality above Quality_Threshold (TBD) only shall be listed (Stations from Modulator 2) and those having low quality (Stations from Modulator 1) shall be removed from the list.
There shall not be any duplicated stations in the list |
145 | The system shall inform the user about if the current station provides a Slideshow or not | Title: BTN_Slideshow is enabled when DAB station provides slideshow
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB station providing slideshow feature is available in DAB station list
5. No additional configuration or setting is done for DAB Slideshow feature
6. DAB landing screen is active
Steps:
1. Select Browse option
2. Select DAB station providing slideshow from the list
Expected Result:
1. DAB station list should be displayed
2. BTN_Slideshow should be enabled in DAB landing screen
Title: BTN_Slideshow is disabled when DAB station does not provide slideshow
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB station not providing slideshow feature is available in DAB station list
5. DAB landing screen is active
Steps:
1. Select Browse option
2. Select DAB station not providing slideshow from the list
Expected Result:
1. DAB station list should be displayed
2. BTN_Slideshow should be disabled in DAB landing screen |
146 | The system shall manage 4 categories of NEWS:
Transport (NEWS1)
- Road trafic flash.
- Transport flash.
News (NEWS2)
- News flash.
- Area weather flash.
- Event announcement.
- Financial report.
Entertainment (NEWS3)
- Program informations.
- Sport report.
Special Flash (NEWS4)
- Alarm.
- Emergency Warning / service.
- Special event. | Title: Service Announcement - Transport (NEWS1)
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. Streaming file having Transport (NEWS1) ( Road trafic flash, Transport flash) is streamed via modulator
Steps:
1. Select Browse option from DAB Landing screen
2. Select any station from the station list
3. Wait for the Service announcement and select "Continue" from the system
4. "Stop" the Service announcement from the System
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played.
3. Service announcement shall be played
4. Service announcement shall be cancelled and system shall play the last tuned DAB station
Title: Service Announcement - News (NEWS2)
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. Streaming file having News (NEWS2) (News flash, Area weather flash, Event announcement, Financial report.) is streamed via modulator
Steps:
1. Select Browse option from DAB Landing screen
2. Select any station from the station list
3. Wait for the Service announcement and select "Continue" from the system
4. "Stop" the Service announcement from the System
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played.
3. Service announcement shall be played
4. Service announcement shall be cancelled and system shall play the last tuned DAB station
Title: Service Announcement - Entertainment (NEWS3)
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. Streaming file having Entertainment (NEWS3) (Program informations, Sport report) is streamed via modulator
Steps:
1. Select Browse option from DAB Landing screen
2. Select any station from the station list
3. Wait for the Service announcement and select "Continue" from the system
4. "Stop" the Service announcement from the System
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played.
3. Service announcement shall be played
4. Service announcement shall be cancelled and system shall play the last tuned DAB station
Title: Service Announcement - Special Flash (NEWS4)
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. Streaming file having Special Flash (NEWS4) ( Alarm, Emergency Warning / service, Special event.) is streamed via modulator
Steps:
1. Select Browse option from DAB Landing screen
2. Select any station from the station list
3. Wait for the Service announcement and select "Continue" from the system
4. "Stop" the Service announcement from the System
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played.
3. Service announcement shall be played
4. Service announcement shall be cancelled and system shall play the last tuned DAB station
Title: Dismiss Transport (NEWS1) from the system
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. Streaming file having Transport (NEWS1) ( Road trafic flash, Transport flash) is streamed via modulator
Steps:
1. Select Browse option from DAB Landing screen
2. Select any station from the station list
3. Wait for the Service announcement and select "Dismiss" from the system
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played.
3. Service announcement shall be Dismissed and system shall continue playing the last tuned DAB station
Title: Dismiss News (NEWS2) from the system
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. Streaming file having News (NEWS2) (News flash, Area weather flash, Event announcement, Financial report.) is streamed via modulator
Steps:
1. Select Browse option from DAB Landing screen
2. Select any station from the station list
3. Wait for the Service announcement and select "Dismiss" from the system
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played.
3. Service announcement shall be Dismissed and system shall continue playing the last tuned DAB station
Title: Dismiss Entertainment (NEWS3) from the system
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. Streaming file having Entertainment (NEWS3) (Program informations, Sport report) is streamed via modulator
Steps:
1. Select Browse option from DAB Landing screen
2. Select any station from the station list
3. Wait for the Service announcement and select "Dismiss" from the system
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played.
3. Service announcement shall be Dismissed and system shall continue playing the last tuned DAB station
Title: Dismiss Special Flash (NEWS4) from the system
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. Streaming file having Special Flash (NEWS4) ( Alarm, Emergency Warning / service, Special event.) is streamed via modulator
Steps:
1. Select Browse option from DAB Landing screen
2. Select any station from the station list
3. Wait for the Service announcement and select "Dismiss" from the system
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played.
3. Service announcement shall be Dismissed and system shall continue playing the last tuned DAB station
Title: Service Announcement - Transport (NEWS1) without user action
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. Streaming file having Transport (NEWS1) ( Road trafic flash, Transport flash) is streamed via modulator
Steps:
1. Select Browse option from DAB Landing screen
2. Select any station from the station list
3. Wait for the Service announcement
4. Wait for 5s (NoInteractionMediumTempo)
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played.
3. Service Announcement Popup with Continue and Dismiss option shall be displayed
4. Service announcement shall be played automatically
Title: Service Announcement - News (NEWS2) without user action
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. Streaming file having News (NEWS2) (News flash, Area weather flash, Event announcement, Financial report.) is streamed via modulator
Steps:
1. Select Browse option from DAB Landing screen
2. Select any station from the station list
3. Wait for the Service announcement
4. Wait for 5s (NoInteractionMediumTempo)
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played.
3. Service Announcement Popup with Continue and Dismiss option shall be displayed
4. Service announcement shall be played automatically
Title: Service Announcement - Entertainment (NEWS3) without user action
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. Streaming file having Entertainment (NEWS3) (Program informations, Sport report) is streamed via modulator
Steps:
1. Select Browse option from DAB Landing screen
2. Select any station from the station list
3. Wait for the Service announcement
4. Wait for 5s (NoInteractionMediumTempo)
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played.
3. Service Announcement Popup with Continue and Dismiss option shall be displayed
4. Service announcement shall be played automatically
Title: Service Announcement - Special Flash (NEWS4) without user action
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. Streaming file having Special Flash (NEWS4) ( Alarm, Emergency Warning / service, Special event.) is streamed via modulator
Steps:
1. Select Browse option from DAB Landing screen
2. Select any station from the station list
3. Wait for the Service announcement
4. Wait for 5s (NoInteractionMediumTempo)
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played.
3. Service Announcement Popup with Continue and Dismiss option shall be displayed
4. Service announcement shall be played automatically |
147 | The system shall not stretch or rescale the image provided by the station.
-If the received image is smaller than the display area, then it shall be displayed at the center of the display area
-if the received image is bigger than the display area, then it shall be aligned at the top left corner of the display area and cropped at the right hand side and/or at the bottom. | Title: System not stretch or rescale image provided by the station
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB landing screen is active
5. Streaming file having DAB station are streamed from Dektec
Steps:
1. Select Browse option
2. Select DAB station providing slideshow from the list
3. Press on slideshow button from HMI
Expected Result:
1. DAB station list should be displayed
2. System should play selected DAB station & BTN_Slideshow should be enable in DAB landing screen for strong signal received
3. The system shall not stretch or rescale the image provided by the station.
Title: Image is smaller than display area then image displayed at the center
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB landing screen is active
5. Streaming file having DAB station are streamed from Dektec
Steps:
1. Select Browse option
2. Select DAB station providing slideshow from the list
3. Press on slideshow button from HMI
Expected Result:
1. DAB station list should be displayed
2. System should play selected DAB station & BTN_Slideshow should be enable in DAB landing screen for strong signal received
3. Image is smaller than display area then image displayed at the center
Title: Image is smaller in width of display area then image displayed at the center
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB landing screen is active
5. Streaming file having DAB station are streamed from Dektec
Steps:
1. Select Browse option
2. Select DAB station providing slideshow from the list
3. Press on slideshow button from HMI
Expected Result:
1. DAB station list should be displayed
2. System should play selected DAB station & BTN_Slideshow should be enable in DAB landing screen for strong signal received
3. System should displayed image at the center
Title: Image is smaller in height of display area then image displayed at the center
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB landing screen is active
5. Streaming file having DAB station are streamed from Dektec
Steps:
1. Select Browse option
2. Select DAB station providing slideshow from the list
3. Press on slideshow button from HMI
Expected Result:
1. DAB station list should be displayed
2. System should play selected DAB station & BTN_Slideshow should be enable in DAB landing screen for strong signal received
3. System should displayed image at the center
Title: Image is bigger than display area then aligned at the top left corner of display area
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB landing screen is active
5. Streaming file having DAB station are streamed from Dektec
Steps:
1. Select Browse option
2. Select DAB station providing slideshow from the list
3. Press on slideshow button from HMI
Expected Result:
1. DAB station list should be displayed
2. System should play selected DAB station & BTN_Slideshow should be enable in DAB landing screen for strong signal received
3. if the received image is bigger than the display area, then it shall be aligned at the top left corner of the display area and cropped at the right hand side and/or at the bottom
Title: Image is bigger in width of display area then aligned at the top left corner of display area
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB landing screen is active
5. Streaming file having DAB station are streamed from Dektec
Steps:
1. Select Browse option
2. Select DAB station providing slideshow from the list
3. Press on slideshow button from HMI
Expected Result:
1. DAB station list should be displayed
2. System should play selected DAB station & BTN_Slideshow should be enable in DAB landing screen for strong signal received
3. system should received image bigger in than the display area, then it should be aligned at the top left corner and cropped at the right hand side
Title: Image is bigger in height display area then aligned at the top left corner of display area
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB landing screen is active
5. Streaming file having DAB station are streamed from Dektec
Steps:
1. Select Browse option
2. Select DAB station providing slideshow from the list
3. Press on slideshow button from HMI
Expected Result:
1. DAB station list should be displayed
2. System should play selected DAB station & BTN_Slideshow should be enable in DAB landing screen for strong signal received
3. system should received image bigger in than the display area, then it should be aligned at the top left corner and cropped at the right hand side also cropped at bottom
Title: Image is bigger in height & width display area then aligned at the top left corner of display area
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB landing screen is active
5. Streaming file having DAB station are streamed from Dektec
Steps:
1. Select Browse option
2. Select DAB station providing slideshow from the list
3. Press on slideshow button from HMI
Expected Result:
1. DAB station list should be displayed
2. System should play selected DAB station & BTN_Slideshow should be enable in DAB landing screen for strong signal received
3. system should received image bigger in than the display area, then it should be aligned at the top left corner and cropped at the right hand side also cropped at bottom |
148 | The system shall provide AM band ranges according to configuration provided by BTEL_BROADCAST_RAD_AM_BA DOTE parameter.
See table 6
!Table6.PNG! | Title: AM Band frequency range support when BROADCAST_AM_BAND = 2
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 2
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list
3. Select any station from the list
Expected Result:
1. AM station list shall be displayed
2. Listed AM frequencies shall be in the range of 531-1602 KHz
3. Selected AM station shall be played
Title: AM Band Minimum frequency support when BROADCAST_AM_BAND = 2
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 2
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select Minimum frequency station from the list
Expected Result:
1. AM station list shall be displayed
2. AM frequency is tuned to minimum frequency i.e. 531 KHz and station is played without any issue
Title: AM Band Maximum frequency support when BROADCAST_AM_BAND = 2
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 2
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select Maximum frequency station from the list
Expected Result:
1. AM station list shall be displayed
2. AM frequency is tuned to maximum frequency i.e. 1602 KHz and station is played without any issue
Title: AM Band frequency range support when BROADCAST_AM_BAND = 5
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 5
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list
3. Select any station from the list
Expected Result:
1. AM station list shall be displayed
2. Listed AM frequencies shall be in the range of 530-1710 kHz
3. Selected AM station shall be played
Title: AM Band Minimum frequency support when BROADCAST_AM_BAND = 5
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 5
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select Minimum frequency station from the list
Expected Result:
1. AM station list shall be displayed
2. AM frequency is tuned to minimum frequency i.e. 530 KHz and station is played without any issue
Title: AM Band Maximum frequency support when BROADCAST_AM_BAND = 5
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 5
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select Maximum frequency station from the list
Expected Result:
1. AM station list shall be displayed
2. AM frequency is tuned to maximum frequency i.e. 1710 KHz and station is played without any issue
Title: AM Band frequency range support when BROADCAST_AM_BAND = 3
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 3
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list
3. Select any station from the list
Expected Result:
1. AM station list shall be displayed
2. Listed AM frequencies shall be in the range of 531-1629kHz
3. Selected AM station shall be played
Title: AM Band Minimum frequency support when BROADCAST_AM_BAND = 3
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 3
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select Minimum frequency station from the list
Expected Result:
1. AM station list shall be displayed
2. AM frequency is tuned to minimum frequency i.e. 531 KHz and station is played without any issue
Title: AM Band Maximum frequency support when BROADCAST_AM_BAND = 3
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 3
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select Maximum frequency station from the list
Expected Result:
1. AM station list shall be displayed
2. AM frequency is tuned to maximum frequency i.e. 1629 KHz and station is played without any issue
Title: AM Band frequency range support when BROADCAST_AM_BAND = 8
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 8
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list
3. Select any station from the list
Expected Result:
1. AM station list shall be displayed
2. Listed AM frequencies shall be in the range of 540-1700kHz
3. Selected AM station shall be played
Title: AM Band Minimum frequency support when BROADCAST_AM_BAND = 8
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 8
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select Minimum frequency station from the list
Expected Result:
1. AM station list shall be displayed
2. AM frequency is tuned to minimum frequency i.e. 540 KHz and station is played without any issue
Title: AM Band Maximum frequency support when BROADCAST_AM_BAND = 8
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 8
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select Maximum frequency station from the list
Expected Result:
1. AM station list shall be displayed
2. AM frequency is tuned to maximum frequency i.e. 1700 KHz and station is played without any issue
Title: AM Band frequency range support when BROADCAST_AM_BAND = 4
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 4
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list
3. Select any station from the list
Expected Result:
1. AM station list shall be displayed
2. Listed AM frequencies shall be in the range of 531-1701 kHz
3. Selected AM station shall be played
Title: AM Band Minimum frequency support when BROADCAST_AM_BAND = 4
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 4
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select Minimum frequency station from the list
Expected Result:
1. AM station list shall be displayed
2. AM frequency is tuned to minimum frequency i.e. 531 KHz and station is played without any issue
Title: AM Band Maximum frequency support when BROADCAST_AM_BAND = 4
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 4
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select Maximum frequency station from the list
Expected Result:
1. AM station list shall be displayed
2. AM frequency is tuned to maximum frequency i.e. 1701 KHz and station is played without any issue
Title: AM LW Band frequency range support when BROADCAST_AM_BAND = 6
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 6
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list
3. Select any station from the list
Expected Result:
1. AM station list shall be displayed
2. Listed AM frequencies shall be in the range of 153-279kHz + 531-1602kHz
3. Selected AM station shall be played
Title: AM Band Minimum frequency support when BROADCAST_AM_BAND = 6
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 6
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select Minimum frequency station from the list
Expected Result:
1. AM station list shall be displayed
2. AM frequency is tuned to minimum frequency i.e. 153 KHz and station is played without any issue
Title: AM Band Maximum frequency support when BROADCAST_AM_BAND = 6
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 6
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select Maximum frequency station from the list
Expected Result:
1. AM station list shall be displayed
2. AM frequency is tuned to maximum frequency i.e. 1602 KHz and station is played without any issue
Title: AM Band frequency range support when BROADCAST_AM_BAND = 7
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 7
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list
3. Select any station from the list
Expected Result:
1. AM station list shall be displayed
2. Listed AM frequencies shall be in the range of 153-279kHz + 531-1629kHz
3. Selected AM station shall be played
Title: AM Band Minimum frequency support when BROADCAST_AM_BAND = 7
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 7
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select Minimum frequency station from the list
Expected Result:
1. AM station list shall be displayed
2. AM frequency is tuned to minimum frequency i.e. 153 KHz and station is played without any issue
Title: AM Band Maximum frequency support when BROADCAST_AM_BAND = 7
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 7
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select Maximum frequency station from the list
Expected Result:
1. AM station list shall be displayed
2. AM frequency is tuned to maximum frequency i.e. 1629 KHz and station is played without any issue
Title: AM LW Band frequency range support when BROADCAST_AM_BAND = 1
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 1
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list
3. Select any station from the list
Expected Result:
1. AM station list shall be displayed
2. Listed AM frequencies shall be in the range of 153-279kHz
3. Selected AM station shall be played
Title: AM LW Band Minimum frequency support when BROADCAST_AM_BAND = 1
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 1
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select Minimum frequency station from the list
Expected Result:
1. AM station list shall be displayed
2. AM frequency is tuned to minimum frequency i.e. 153 KHz and station is played without any issue
Title: AM LW Band Maximum frequency support when BROADCAST_AM_BAND = 1
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_AM_BAND parameter value is set to 1
6. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select Maximum frequency station from the list
Expected Result:
1. AM station list shall be displayed
2. AM frequency is tuned to maximum frequency i.e. 279 KHz and station is played without any issue |
149 | The system shall provide FM band range according to configuration provided by BTEL_BROADCAST_RAD_FM_BA DOTE parameter.
See table 2
!Table2.PNG|width=1618,height=137! | Title: FM Band frequency range support when BROADCAST_FM_BAND = 100
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 100
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list
3. Select any station from the list
Expected Result:
1. FM station list shall be displayed
2. Listed FM frequencies shall be in the range of 87.5-108.0 MHz
3. Selected FM station shall be played
Title: FM Band Minimum frequency support when BROADCAST_FM_BAND = 100
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 100
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select Minimum frequency station from the list
Expected Result:
1. FM station list shall be displayed
2. FM frequency is tuned to minimum frequency i.e. 87.5 MHz and station is played without any issue
Title: FM Band Maximum frequency supportwhen BROADCAST_FM_BAND = 100
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 100
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select Maximum frequency station from the list
Expected Result:
1. FM station list shall be displayed
2. FM frequency is tuned to maximum frequency i.e. 108 MHz and station is played without any issue
Title: FM Band frequency range support when BROADCAST_FM_BAND = 111
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 111
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list
3. Select any station from the list
Expected Result:
1. FM station list shall be displayed
2. Listed FM frequencies shall be in the range of 87.9-108.0 MHz
3. Selected FM station shall be played
Title: FM Band Minimum frequency support when BROADCAST_FM_BAND = 111
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 111
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select Minimum frequency station from the list
Expected Result:
1. FM station list shall be displayed
2. FM frequency is tuned to minimum frequency i.e. 87.9 MHz and station is played without any issue
Title: FM Band Maximum frequency supportwhen BROADCAST_FM_BAND = 111
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 111
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select Maximum frequency station from the list
Expected Result:
1. FM station list shall be displayed
2. FM frequency is tuned to maximum frequency i.e. 108 MHz and station is played without any issue
Title: FM Band Minimum frequency support when BROADCAST_FM_BAND = 011
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 011
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select Minimum frequency station from the list
Expected Result:
1. FM station list shall be displayed
2. FM frequency is tuned to minimum frequency i.e. 76.0 MHz and station is played without any issue
Title: FM Band Maximum frequency supportwhen BROADCAST_FM_BAND = 011
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 011
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select Maximum frequency station from the list
Expected Result:
1. FM station list shall be displayed
2. FM frequency is tuned to maximum frequency i.e. 108.0 MHz and station is played without any issue
Title: FM Band frequency range support when BROADCAST_FM_BAND = 011
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 011
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list
3. Select any station from the list
Expected Result:
1. FM station list shall be displayed
2. Listed FM frequencies shall be in the range of 76.0-108.0 MHz
3. Selected FM station shall be played
Title: FM Band frequency range support when BROADCAST_FM_BAND = 001
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 001
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list
3. Select any station from the list
Expected Result:
1. FM station list shall be displayed
2. Listed FM frequencies shall be in the range of 76.0-95.0 MHz
3. Selected FM station shall be played
Title: FM Band Minimum frequency support when BROADCAST_FM_BAND = 001
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 001
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select Minimum frequency station from the list
Expected Result:
1. FM station list shall be displayed
2. FM frequency is tuned to minimum frequency i.e. 76.0 MHz and station is played without any issue
Title: FM Band Maximum frequency supportwhen BROADCAST_FM_BAND = 001
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 001
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select Maximum frequency station from the list
Expected Result:
1. FM station list shall be displayed
2. FM frequency is tuned to maximum frequency i.e. 95.0 MHz and station is played without any issue
Title: FM Band frequency range support when BROADCAST_FM_BAND = 010
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 010
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list
3. Select any station from the list
Expected Result:
1. FM station list shall be displayed
2. Listed FM frequencies shall be in the range of 76.0-108.0 MHz
3. Selected FM station shall be played
Title: FM Band Minimum frequency support when BROADCAST_FM_BAND = 010
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 010
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select Minimum frequency station from the list
Expected Result:
1. FM station list shall be displayed
2. FM frequency is tuned to minimum frequency i.e. 76.0 MHz and station is played without any issue
Title: FM Band Maximum frequency supportwhen BROADCAST_FM_BAND = 010
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 010
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select Maximum frequency station from the list
Expected Result:
1. FM station list shall be displayed
2. FM frequency is tuned to maximum frequency i.e. 108.0 MHz and station is played without any issue
Title: FM Band frequency range support when BROADCAST_FM_BAND = 101
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 101
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list
3. Select any station from the list
Expected Result:
1. FM station list shall be displayed
2. Listed FM frequencies shall be in the range of 87.5-108.0 MHz
3. Selected FM station shall be played
Title: FM Band Minimum frequency support when BROADCAST_FM_BAND = 101
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 101
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select Minimum frequency station from the list
Expected Result:
1. FM station list shall be displayed
2. FM frequency is tuned to minimum frequency i.e. 87.5 MHz and station is played without any issue
Title: FM Band Maximum frequency supportwhen BROADCAST_FM_BAND = 101
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 101
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select Maximum frequency station from the list
Expected Result:
1. FM station list shall be displayed
2. FM frequency is tuned to maximum frequency i.e. 108.0 MHz and station is played without any issue
Title: FM Band frequency range support when BROADCAST_FM_BAND = 110
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 110
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list
3. Select any station from the list
Expected Result:
1. FM station list shall be displayed
2. Listed FM frequencies shall be in the range of 87.9-108.0 MHz
3. Selected FM station shall be played
Title: FM Band Minimum frequency supportwhen BROADCAST_FM_BAND = 110
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 110
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select Minimum frequency station from the list
Expected Result:
1. FM station list shall be displayed
2. FM frequency is tuned to minimum frequency i.e. 87.9 MHz and station is played without any issue
Title: FM Band Maximum frequency supportwhen BROADCAST_FM_BAND = 110
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. System BROADCAST_FM_BAND parameter value is set to 110
6. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select Maximum frequency station from the list
Expected Result:
1. FM station list shall be displayed
2. FM frequency is tuned to maximum frequency i.e. 108.0 MHz and station is played without any issue |
150 | The system shall retain the current station in case the user selects an empty preset. | Title: DAB tuner is retained to current station after selecting empty preset from DAB preset list
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- Few empty presets are available in DAB preset list.
- 9A 202.928 MHz DAB station is playing.
Steps:
1. Select blank preset from DAB preset list.
Expected Result:
1. DAB tuner shall be retained to currently playing station. |
151 | The system shall retain the initial station list after cancellation of the ongoing station list update. | Title: Initial station list is retained on selecting 'Cancel' option during ongoing station list update for FM Band
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active.
Steps:
1. Select 'Station List Browse' icon and wait till DAB station list is displayed on screen.
2. Select 'Refresh' option to manually update the station list.
3. Select 'Cancel' option.
Expected Result:
1. The station list shall be displayed.
2. Updated station list shall be displayed.
3. Initial station list shall be retained on selecting 'Cancel' option during ongoing station list update for DAB Band. |
152 | The system shall retrieved the tuner data from the memory on startup. | Title: DAB station list persistency after Ignition Cycle
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. DAB landing screen is active
Steps:
1. Select the Browse option from the DAB landing screen
2. Perform Ignition cycle (Ignition OFF-> Ignition ON)
3. Select Radio icon from System Home screen and launch DAB source
4. Select Browse option from DAB Landing screen
Expected Result:
1. DAB station list shall be displayed
2. System shall be turned ON after ignition cycle
3. DAB source shall be launched
4. Previous DAB station list shall be persisted after ignition cycle
Title: DAB station details persistency after Ignition Cycle
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. DAB landing screen is active
Steps:
1. Select the Browse option from the DAB landing screen
2. Select any station from the list
3. Perform Ignition cycle (Ignition OFF-> Ignition ON)
4. Select Radio icon from System Home screen and launch DAB source
Expected Result:
1. DAB station list shall be displayed
2. Selected station shall be played and tuned station details(Station name, Multiplex name, Station number, Station logo, Radio Text etc) shall be displayed
3. System shall be turned ON after ignition cycle
4. Previously tuned DAB station shall be played and station details shall be displayed
Title: DAB Preset list persistency after Ignition Cycle
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. DAB landing screen is active
6. Few DAB stations are added as presets
Steps:
1. Select Browse option from DAB Landing screen
2. Select any station from the list
3. Long press on any preset number from DAB landing screen
4. Perform Ignition cycle (Ignition OFF-> Ignition ON)
5. Press Radio button from control bar and launch DAB source
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played
3. Currently tuned DAB station shall be stored as a preset, to the pressed preset number
4. System shall be turned ON after Ignition cycle
5. DAB source shall be launched and the preset list available before ignition cycle shall be persisted |
153 | The system shall store all the  station information needed to retrieve and tune it.
Among them only station icon (if available) and short station name shall be displayed in the presets list. | Title: Multiplex name & short station name is displayed for stored preset of DAB band
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active and 9A 202.928 MHz DAB station is playing.
Steps:
1. Long press on preset number to add currently tuned station into Preset list.
Expected Result:
1. Station icon(if available) and short station name shall be displayed for preset. |
154 | The system shall store the tuner data (station list, last tuned station information and preset information) into the memory and it shall be available across ignition cycles and source switches. | Title: DAB (DLS)Radio text setting persist after switching back from home screen when set as 'ON'.
Preconditions:
- System is up and running (ACC ON->IGN ON)
- DAB antenna is plugged to tuner
- DAB landing screen is active
- (DLS)Radio text setting is set to 'OFF'.
Steps:
1.Select Radio Settings option and set Radio Text setting to 'ON'.
2.Close Radio settings and Go back to Home screen.
3.Open Radio application.
4.Select Radio Settings option.
Expected Result:
1.(DLS)Radio text setting shall set to 'ON'.
2.Home screen shall launch without any HMI issues.
3.Radio application shall launch.
4.(DLS)Radio text setting shall remain to 'ON' state.
Title: DAB (DLS)Radio text setting persist after switching back from home screen when set as 'OFF'.
Preconditions:
- System is up and running (ACC ON->IGN ON)
- DAB antenna is plugged to tuner
- DAB landing screen is active
- (DLS)Radio text setting is set to 'ON'.
Steps:
1.Select Radio Settings option and set Radio Text setting to 'OFF'.
2.Close Radio settings and Go back to Home screen.
3.Open Radio application.
4.Select Radio Settings option.
Expected Result:
1.(DLS)Radio text setting shall set to 'OFF'.
2.Home screen shall launch without any HMI issues.
3.Radio application shall launch.
4.(DLS)Radio text setting shall remain to 'OFF' state
Title: DAB station list persistency after Ignition Cycle
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. DAB landing screen is active
Steps:
1. Select the Browse option from the DAB landing screen
2. Perform Ignition cycle (Ignition OFF-> Ignition ON)
3. Select Radio icon from System Home screen and launch DAB source
4. Select Browse option from DAB Landing screen
Expected Result:
1. DAB station list shall be displayed
2. System shall be turned ON after ignition cycle
3. DAB source shall be launched
4. Previous DAB station list shall be persisted after ignition cycle
Title: DAB station list persists after performing short ignition cycle
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- CANoe is connected.
- DAB landing screen is active.
Steps:
1. Select 'Station List Browse' icon.
2. Send KEY_POS CAN signal with value '00' to perform Ignition OFF and wait for XX time.
3. Send KEY_POS CAN signal with value '01' to perform Ignition ON.
4. Select Radio.
5. Select DAB band.
6. Select 'Station List Browse' option.
Expected Result:
1. Station list shall be displayed.
2. System shall be turned OFF.
3. System shall be turned ON.
4. Radio application shall be selected.
5. DAB Band shall be selected.
6. DAB station list shall persists after performing short ignition cycle.
Title: DAB station details persistency after Ignition Cycle
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. DAB landing screen is active
Steps:
1. Select the Browse option from the DAB landing screen
2. Select any station from the list
3. Perform Ignition cycle (Ignition OFF-> Ignition ON)
4. Select Radio icon from System Home screen and launch DAB source
Expected Result:
1. DAB station list shall be displayed
2. Selected station shall be played and tuned station details(Station name, Multiplex name, Station number, Station logo, Radio Text etc) shall be displayed
3. System shall be turned ON after ignition cycle
4. Previously tuned DAB station shall be played and station details shall be displayed
Title: Last tuned DAB station information is persisted over Short Ignition cycle.
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- Canoe is connected to system.
- DAB landing screen is active.
Steps:
1. Tune to 6A 181.936 MHz DAB station.
2. Perform Short Ignition cycle.
3. Open radio application.
Expected Result:
1. 6A 181.936 MHz DAB station shall be playing and station information is displayed on screen.
2. System shall be up and running after short ignition cycle.
3. Last tuned DAB station information shall persist on performing Short Ignition cycle.
Title: DAB Preset list persistency after Ignition Cycle
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. DAB landing screen is active
6. Few DAB stations are added as presets
Steps:
1. Select Browse option from DAB Landing screen
2. Select any station from the list
3. Long press on any preset number from DAB landing screen
4. Perform Ignition cycle (Ignition OFF-> Ignition ON)
5. Press Radio button from control bar and launch DAB source
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played
3. Currently tuned DAB station shall be stored as a preset, to the pressed preset number
4. System shall be turned ON after Ignition cycle
5. DAB source shall be launched and the preset list available before ignition cycle shall be persisted
Title: DAB Preset List information is persisted on Short Ignition cycle.
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- CANoe is connected to system.
- DAB landing screen is active.
Steps:
1. Tune any valid DAB station.
2. Add 5 DAB Station in preset List.
3. Perform Short Ignition cycle.
4. Open radio application.
Expected Result:
1. Selected DAB station shall be playing.
2. 5 DAB presets shall be added in preset list.
3. System shall be up and running after short ignition cycle.
4. DAB Preset List information shall persist on performing Short Ignition cycle.
Title: DAB station list persistency during source switch to AM
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. AM Modulator is available and connected to the system
6. DAB landing screen is active
Steps:
1. Select the Browse option from the DAB landing screen
2. Press back button and launch AM source from Band option
3. Select the Browse option from the AM landing screen
4. Select any station from the list
5. Launch DAB source from Band option and select the browse option
Expected Result:
1. DAB station list shall be displayed
2. AM source shall be launched
3. AM station list shall be displayed
4. Selected station shall be played
5. Previous DAB station list shall be persisted after the source change
Title: DAB station details persistency during source switch to AM
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. AM Modulator is available and connected to the system
6. DAB landing screen is active
Steps:
1. Select the Browse option from the DAB landing screen
2. Select any station from the list
3. Launch AM source from Band option
4. Select the Browse option from the AM landing screen
5. Select any station from the list
6. Launch DAB source from Band option
Expected Result:
1. DAB station list shall be displayed
2. Selected station shall be played and tuned station details(Station name, Multiplex name, Station number, Station logo, Radio Text etc) shall be displayed
3. AM source shall be launched
4. AM station list shall be displayed
5. Selected station shall be played
6. Previously tuned DAB station shall be played and station details shall be displayed
Title: DAB Preset list persistency during source switch to AM
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. AM Modulator is available and connected to the system
6. DAB landing screen is active
7. Few DAB stations are added as presets
Steps:
1. Select Browse option from DAB Landing screen
2. Select any station from the list
3. Long press on any preset number from DAB landing screen
4. Launch AM source from Band option
5. Select the Browse option from the AM landing screen
6. Select any station from the list
7. Launch DAB source from Band option
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played
3. Currently tuned DAB station shall be stored as a preset, to the pressed preset number
4. AM source shall be launched
5. AM station list shall be displayed
6. Selected station shall be played
7. DAB source shall be launched and preset list available before source switch shall remain same
Title: DAB station list persistency during source switch to FM
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. FM Modulator is available and connected to the system
6. DAB landing screen is active
Steps:
1. Select the Browse option from the DAB landing screen
2. Press back button and launch FM source from Band option
3. Select the Browse option from the FM landing screen
4. Select any station from the list
5. Launch DAB source from Band option and select the browse option
Expected Result:
1. DAB station list shall be displayed
2. FM source shall be launched
3. FM station list shall be displayed
4. Selected station shall be played
5. Previous DAB station list shall be persisted after the source change
Title: DAB station details persistency during source switch to FM
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. FM Modulator is available and connected to the system
6. DAB landing screen is active
Steps:
1. Select the Browse option from the DAB landing screen
2. Select any station from the list
3. Launch FM source from Band option
4. Select the Browse option from the FM landing screen
5. Select any station from the list
6. Launch DAB source from Band option
Expected Result:
1. DAB station list shall be displayed
2. Selected station shall be played and tuned station details(Station name, Multiplex name, Station number, Station logo, Radio Text etc) shall be displayed
3. FM source shall be launched
4. FM station list shall be displayed
5. Selected station shall be played
6. Previously tuned DAB station shall be played and station details shall be displayed
Title: DAB Preset list persistency during source switch to FM
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. FM Modulator is available and connected to the system
6. DAB landing screen is active
7. Few DAB stations are added as presets
Steps:
1. Select Browse option from DAB Landing screen
2. Select any station from the list
3. Long press on any preset number from DAB landing screen
4. Launch FM source from Band option
5. Select the Browse option from the FM landing screen
6. Select any station from the list
7. Launch DAB source from Band option
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played
3. Currently tuned DAB station shall be stored as a preset, to the pressed preset number
4. FM source shall be launched
5. FM station list shall be displayed
6. Selected station shall be played
7. DAB source shall be launched and preset list available before source switch shall remain same
Title: System stores 5 last tuned stations in the memory
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- CANoe is connected.
- DAB landing screen is active.
Steps:
1. Tune to 5 different valid stations one by one.
2. Perform ignition cycle.
Expected Result:
1. Different station shall be playing according to stations selection.
2. System shall be up and running after ignition cycle and system should store and display last tuned 5 stations over ignition cycle.
Title: DAB station list persistency during source switch to USB
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5.USB having playable audio files are connected with the system
6. DAB landing screen is active
Steps:
1. Select the Browse option from the DAB landing screen
2. Select the media icon from the control bar
3. Launch USB media source from MyDevice icon
4. Select List option and play a song from any library
5. Select Radio icon from System Home screen and launch DAB source
6. Select the Browse option from the DAB landing screen
Expected Result:
1. DAB station list shall be displayed
2. Media application shall be launched
3. USB media source shall be launched
4. Selected song shall be played
5. DAB source shall be launched
6. Previous DAB station list shall be persisted after the source change
Title: DAB station list persistency during source switch to BT Media
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. BT device having playable audio files are connected to the system
6. DAB landing screen is active
Steps:
1. Select the Browse option from the DAB landing screen
2. Select the media icon from the control bar
3. Launch BT media source from MyDevice icon
4. Select List option and play a song from any library
5. Select Radio icon from System Home screen and launch DAB source
6. Select the Browse option from the DAB landing screen
Expected Result:
1. DAB station list shall be displayed
2. Media application shall be launched
3. BT media source shall be launched
4. Selected song shall be played
5. DAB source shall be launched
6. Previous DAB station list shall be persisted after the source change
Title: DAB station details persistency during source switch to USB
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. USB having playable audio files are connected with the system
6. DAB landing screen is active
Steps:
1. Select the Browse option from the DAB landing screen
2. Select any station from the list
3. Select the media icon from the control bar
4. Launch USB media source from MyDevice icon
5. Select List option and play a song from any library
6. Select Radio icon from System Home screen and launch DAB source
Expected Result:
1. DAB station list shall be displayed
2. Selected station shall be played and tuned station details(Station name, Multiplex name, Station number, Station logo, Radio Text etc) shall be displayed
3. Media application shall be launched
4. USB media source shall be launched
5. Selected song shall be played
6. Previously tuned DAB station shall be played and station details shall be displayed
Title: DAB station details persistency during source switch to BT Media
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. BT device having playable audio files are connected to the system
6. DAB landing screen is active
Steps:
1. Select the Browse option from the DAB landing screen
2. Select any station from the list
3. Select the media icon from the control bar
4. Launch BT media source from MyDevice icon
5. Select List option and play a song from any library
6. Select Radio icon from System Home screen and launch DAB source
Expected Result:
1. DAB station list shall be displayed
2. Selected station shall be played and tuned station details(Station name, Multiplex name, Station number, Station logo, Radio Text etc) shall be displayed
3. Media application shall be launched
4. BT media source shall be launched
5. Selected song shall be played
6. Previously tuned DAB station shall be played and station details shall be displayed
Title: DAB Preset list persistency during source switch to USB
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. USB having playable audio files are connected with the system
6. DAB landing screen is active
7. Few DAB stations are added as presets
Steps:
1. Select Browse option from DAB Landing screen
2. Select any station from the list
3. Long press on any preset number from DAB landing screen
4. Select the media icon from the control bar
5. Launch USB media source from MyDevice icon
6. Select List option and play a song from any library
7. Select Radio icon from System Home screen and launch DAB source
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played
3. Currently tuned DAB station shall be stored as a preset, to the pressed preset number
4. Media application shall be launched
5. USB media source shall be launched
6. Selected song shall be played
7. DAB source shall be launched and Preset list available before source switch shall remain same
Title: DAB Preset list persistency during source switch to BT Media
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator is available and connected to the system
5. BT device having playable audio files are connected to the system
6. DAB landing screen is active
7. Few DAB stations are added as presets
Steps:
1. Select Browse option from DAB Landing screen
2. Select any station from the list
3. Long press on any preset number from DAB landing screen
4. Select the media icon from the control bar
5. Launch BT media source from MyDevice icon
6. Select List option and play a song from any library
7. Select Radio icon from System Home screen and launch DAB source
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played
3. Currently tuned DAB station shall be stored as a preset, to the pressed preset number
4. Media application shall be launched
5. BT media source shall be launched
6. Selected song shall be played
7. DAB source shall be launched and preset list available before source switch shall remain same
Title: Last tuned DAB station is persisted on performing Ignition cycle.
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- CANoe is connected.
- DAB landing screen is active.
Steps:
1. Tune any valid 5A 174.928 MHz DAB station.
2. Perform Ignition cycle.
3. Launch Radio application.
Expected Result:
1. 5A 174.928 MHz DAB station shall be playing.
2. System shall be up and running after ignition cycle.
3. Last tuned 5A 174.928 MHz DAB station shall be persisted on performing Ignition cycle.
Title: Last tuned DAB station is persisted on performing source switching from DAB->FM->DAB
Preconditions:
- System is up and running (ACC ON->IGN ON).
- FM, DAB antenna is plugged to tuner.
- CANoe is connected.
- DAB landing screen is active.
Steps:
1. Tune any valid 5A 174.928 MHz DAB station.
2. Press band option and select FM.
3. Again select band option and select DAB band.
4. observe the tuned station.
Expected Result:
1. 5A 174.928 MHz DAB station shall be playing.
2. FM shall be selected.
3. DAB shall be selected.
4. Last tuned 5A 174.928 MHz DAB station shall be persisted.
Title: Last tuned DAB station is persisted on performing source switching from DAB->AM->DAB
Preconditions:
- System is up and running (ACC ON->IGN ON).
- AM, DAB antenna is plugged to tuner.
- CANoe is connected.
- DAB landing screen is active.
Steps:
1. Tune any valid 5A 174.928 MHz DAB station.
2. Press band option and select AM.
3. Again select band option and select DAB band.
4. Observe the tuned station.
Expected Result:
1. 5A 174.928 MHz DAB station shall be playing.
2. AM shall be selected.
3. DAB shall be selected.
4. Last tuned 5A 174.928 MHz DAB station shall be persisted. |
155 | The system shall support Dynamic Label Segment of the Service( if available) as of part of the current service information data. | Title: (DLS) Radio text is displayed on screen when Radio Text setting is set to 'ON'.
Preconditions:
- System is up and running (ACC ON->IGN ON)
- DAB landing screen is active
- Radio text setting is set to 'ON'.
- DTU-215 is plugged with freq 5A 174.928
Steps:
1.On DTU, set (DLS)Radio Text for 5A 174.928 station.
Expected Result:
1.Available (DLS) Radio Text for tuned station 5A 174.928 shall display on screen.
Title: (DLS) Radio text is not displayed on screen when Radio Text setting is set to 'OFF'.
Preconditions:
- System is up and running (ACC ON->IGN ON)
- DAB landing screen is active
- Radio text setting is set to 'OFF'.
- DTU-215 is plugged with freq 5A 174.928
Steps:
1.On DTU, set (DLS)Radio Text for 5A 174.928 station.
Expected Result:
1.Available (DLS) Radio Text for tuned station 5A 174.928 will not display on screen. |
156 | The system shall support Slideshow (simple profile) as part of the current station information data. | Title: BTN_Slideshow is enabled when DAB station provides slideshow
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB station providing slideshow feature is available in DAB station list
5. No additional configuration or setting is done for DAB Slideshow feature
6. DAB landing screen is active
Steps:
1. Select Browse option
2. Select DAB station providing slideshow from the list
Expected Result:
1. DAB station list should be displayed
2. BTN_Slideshow should be enabled in DAB landing screen |
157 | The system shall support maximum 400 stations in the station list. | Title: DAB Station list - Maximum Stations
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB landing screen is active
6. Streaming file with more than 400 DAB stations are available
Steps:
1. Select Browse option from DAB landing screen
2. Scroll down DAB station list
Expected Result:
1. DAB station list shall be displayed
2. DAB station list shall be listed with maximum 400 stations |
158 | The system shall support user to tune a service within the DAB band range.
DAB band range is defined according to configuration provided by BTEL_BROADCAST_RAD_NUM_BA DOTE parameter:Â
-WORLD WIDE: BAND III (174.928Mhz ~ 239.200Mhz )Â
-SPECIFIC AUSTRALIA: BAND III (174.928Mhz ~ 229.072Mhz )
!image-2023-08-03-18-22-30-661.png!
 | Title: DOTE parameter for DAB - Set DAB Area selection to "World Wide"
Preconditions:
1. Vehicle battery (Vbat) is ON
2. Ignition = ON
3. Canoe is connected to System
4. System is in Full Run mode
5. Security Access for Variant coding is enabled
Steps:
1. Go to Diagnostic Console
2.Go to Engineering Datass
3. Select 2E 21 00 Service
4. Set BTEL _BROADCAST RAD NUM BA_000 to "World Wide" and Execute 2E 21 00 SERVICE
5. Perform Sleep Cycle
6. Select radio widget from Homescreen
7. Select band selection icon.
8. Select Radio settings option
Expected Result:
1. Diagnostic console should be opened
2. Engineering Datas section should be opened
3. 2E 21 00 Service With availabe services should be displayed
4. 2E 21 00 Service should be executed and BTEL _BROADCAST RAD NUM BA_000 should be set "World Wide"
5. Sleep cycle should be completed and system should Wake Up
6. Radio playing screen should be launched.
7. DAB should be listed in Band selection options.
8. "DAB to FM handover" and "DAB Service announcement" options should be displayed in Radio settings.
Title: DOTE parameter for DAB - Set DAB Area selection to "Specific Australia"
Preconditions:
1. Vehicle battery (Vbat) is ON
2. Ignition = ON
3. Canoe is connected to System
4. System is in Full Run mode
5. Security Access for Variant coding is enabled
Steps:
1. Go to Diagnostic Console
2.Go to Engineering Datass
3. Select 2E 21 00 Service
4. Set BTEL _BROADCAST RAD NUM BA_000 to "Specific Australia" and Execute 2E 21 00 SERVICE
5. Perform Sleep Cycle
6. Select radio widget from Homescreen
7. Select band selection icon.
8. Select Radio settings option
Expected Result:
1. Diagnostic console should be opened
2. Engineering Datas section should be opened
3. 2E 21 00 Service With availabe services should be displayed
4. 2E 21 00 Service should be executed and BTEL _BROADCAST RAD NUM BA_000 should be set "Specific Australia"
5. Sleep cycle should be completed and system should Wake Up
6. Radio playing screen should be launched.
7. DAB should be listed in Band selection options.
8. "DAB to FM handover" and "DAB Service announcement" options should be displayed in Radio settings. |
159 | The system shall switch from any playing lower priority source to DAB in case of a Service Announcement.Â
See Feature Interation Matrix priority rules. | Title: DAB announcement is played when received while BT Audio playback is in progress
Preconditions:
- System is up and running (ACC ON->IGN ON)
- DAB antenna is plugged to tuner
- DAB service announcement is enabled
- BT device is connected to the system
- Home screen is active.
Steps:
1.Go to BT Audio and Play any audio file
2.Receive service announcement from DAB
3.Wait till DAB announcement finishes
Expected Result:
1.Audio file will be playing without any issues.
2.DAB service announcement notification will be displayed and will play without any issues.
3.Bluetooth Audio playback will resume.
Title: DAB Interrupt - Service Announcement during USB Media playback
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5.USB having playable media files are connected with the system
6. Streaming file with DAB Interrupt - Service Announcement is streamed via modulator
Steps:
1. Select Media icon from control bar and launch Radio from left side of Media screen
2. Launch DAB source from Band option
3. Select Browse option from DAB landing screen
4. Select any station from the list
5. Select Media icon from control bar
6. Launch USB media source from MyDevice icon
7. Select List option and play a song from any library
8. Wait for the service announcement from the DAB station and accept it
9. Cancel the service announcement from the system
Expected Result:
1. Radio application shall be launched
2. DAB source shall be launched
3. DAB station list shall be displayed
4. Selected DAB station shall be played
5. Media application shall be launched
6. USB media source shall be launched
7. Selected song shall be played
8. USB media shall be paused and service announcement shall be played
9. USB media streaming shall be resumed
Title: DAB Interrupt - Service Announcement during Radio DAB streaming
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. Streaming file with DAB Interrupt - Service Announcement is streamed via modulator
Steps:
1. Select Media icon from control bar and launch Radio from left side of Media screen
2. Launch DAB source from Band option
3. Select Browse option from DAB landing screen
4. Select any station from the list
5. Wait for the service announcement from the DAB station and accept it
6. Wait for the service announcement to be ended
Expected Result:
1. Radio application shall be launched
2. DAB source shall be launched
3. DAB station list shall be displayed
4. Selected DAB station shall be played
5. DAB service announcement shall be played and DAB station streaming shall be paused
6. DAB service announcement shall be ended and previously played DAB station shall be resumed |
160 | The system shall temporary mute the dab tuner source during Manual Station List update. | Title: Tuner Audio is muted during Manual station list update for DAB Band
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active.
Steps:
1. Play any valid DAB station.
2. Select 'Station List Browse' icon and wait till DAB station list is displayed on screen.
3. Select 'Refresh' option to manually update the station list.
Expected Result:
1. DAB station shall be playing.
2. Station list shall be displayed.
3. Tuner Audio shall be muted during manual station list update for DAB Band. |
161 | The system shall tune to the last station which was tuned before the list update request if the user cancels the ongoing list update. | Title: Last tuned DAB station is persisted on selecting 'Cancel' option during ongoing station list update for DAB Band
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active.
- DAB is tuned to frequency 5A 174.928 MHz.
Steps:
1. Select 'Station List Browse' icon and wait till DAB station list is displayed on screen.
2. Select 'Refresh' option to manually update the station list.
3. Select 'Cancel' option.
4. Select 'Back' option.
Expected Result:
1. The station list shall be displayed.
2. Updated station list shall be displayed.
3. Initial station list shall be retained on selecting 'Cancel' option during ongoing station list update for DAB Band.
4. DAB shall be tuned to last tuned frequency i.e. 5A 174.928 MHz. |
162 | The system shall unmute the tuner audio if an ongoing seek operation is aborted.
This is applicable only if the last ensemble and service where seek was initiated is still valid otherwise .No Reception information will be displayed on the HMI. | Title: Tuner tuned to last frequency and audio is unmuted after aborting auto seek using seek down for DAB band where last tuned frequency is valid
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active.
Steps:
1. Long press on next seek arrow to perform Auto seek.
2. Press next seek arrow while auto seek is in progress where it have reached valid frequency.
Expected Result:
1. Auto seek shall be in progress.
2. Auto seek shall be aborted and tuned to the last frequency where seek gets aborted and audio is unmuted and tuned frequency is playing.
Title: Tuner tuned to last frequency and No Reception information is displayed after aborting auto seek using seek down for DAB band where last tuned frequency is invalid
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active.
Steps:
1. Long press on next seek arrow to perform Auto seek.
2. Move vehicle to region where 5A 174.928 MHz frequency is invalid.
3. Press next seek arrow while auto seek is in progress at 5A 174.928 frequency.
Expected Result:
1. Auto seek is in progress.
2. Hiss sound shall be heard.
3. Auto seek shall be aborted and tuned to the last frequency where seek gets aborted and no reception information is displayed for invalid tuned frequency. |
163 | The system support only JPEG and PNG image format for Slideshow and a maximum size of 50 kbytes.
Images not compatible with this requirement or unable to decode shall be ignored (system shall keep the previous compatible image as the current one). | Title: System support only JPEG less than 50 kb
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB landing screen is active
5. Streaming file having DAB station are streamed from Dektec
Steps:
1. Select Browse option
2. Select DAB station providing slideshow from the list
3. Press on slideshow button from HMI
Expected Result:
1. DAB station list should be displayed
2. System should play selected DAB station & BTN_Slideshow should be enable in DAB landing screen for strong signal received
3. System should support only JPEG images with maximum size of 50 kbytes.
Title: System support only PNG less than 50 kb
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB landing screen is active
5. Streaming file having DAB station are streamed from Dektec
Steps:
1. Select Browse option
2. Select DAB station providing slideshow from the list
3. Press on slideshow button from HMI
Expected Result:
1. DAB station list should be displayed
2. System should play selected DAB station & BTN_Slideshow should be enable in DAB landing screen for strong signal received
3. System should support only PNG images with maximum size of 50 kbytes.
Title: System not support for JPEG more than 50 kb
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB landing screen is active
5. Streaming file having DAB station are streamed from Dektec
Steps:
1. Select Browse option
2. Select DAB station providing slideshow from the list
3. Press on slideshow button from HMI
Expected Result:
1. DAB station list should be displayed
2. System should play selected DAB station & BTN_Slideshow should be enable in DAB landing screen for strong signal received
3. System should display empty image for for more than size of 50 kbytes.
Title: System not support for PNG more than 50 kb
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB landing screen is active
5. Streaming file having DAB station are streamed from Dektec
Steps:
1. Select Browse option
2. Select DAB station providing slideshow from the list
3. Press on slideshow button from HMI
Expected Result:
1. DAB station list should be displayed
2. System should play selected DAB station & BTN_Slideshow should be enable in DAB landing screen for strong signal received
3. System should display empty image for for more than size of 50 kbytes. |
164 | The tuner sources AM shall be for AM band. | Title: AM Band - AM Frequencies availability
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list
3. Press Back button from AM station list
4. Press Seek next from AM landing screen
Expected Result:
1. AM station list shall be displayed
2. Only AM frequencies shall be listed
3. AM landing screen shall be displayed
4. Only AM band stations shall be played |
165 | The tuner sources FM shall be for FM band. | Title: FM Band - FM Frequencies availability
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list
3. Press Back button from FM station list
4. Press Seek next from FM landing screen
Expected Result:
1. FM station list shall be displayed
2. Only FM frequencies shall be listed
3. FM landing screen shall be displayed
4. Only FM band stations shall be played |
166 | The user shall be able to request seek up to the next valid station or seek down to the previous valid station. | Title: Tune next station from current multiplex during seek next
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. DAB landing screen is active
Steps:
1. Select Browse option from DAB Landing screen
2. Select any station (Not the first/last station) of a multiplex
3. Short press Seek_Next arrow from DAB landing screen
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played
3. Next station of the current multiplex shall be tuned. Current station number and total number of stations in current multiplex shall be displayed on the screen.
Title: Previous Valid DAB station is played after performing Seek Down
Preconditions:
- System is up and running (ACC ON->IGN ON).
- DAB antenna is plugged to tuner.
- DAB landing screen is active.
- DAB is tuned to 5B 174.928 MHz and have strong signal strength.
Steps:
1. Short press on previous seek arrow to perform Seek down.
Expected Result:
1. Previous valid DAB station shall be played.
Title: Tune first station of next available multiplex during seek next
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator 1 is available and connected to the system
5. DAB Modulator 2 is available and connected to the system
6. DAB landing screen is active
Steps:
1. Select Browse option from DAB Landing screen
2. Select last station of first multiplex (Multiplex with lower frequency)
3. Short press Seek_Next arrow from DAB landing screen
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played
3. First station of the next available multiplex (Multiplex with next higher frequency) shall be tuned. Current station number and total number of stations in current multiplex shall be displayed on the screen.
Title: Tune first station of first multiplex during seek next
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB Modulator 1 is available and connected to the system
5. DAB Modulator-2 is available and connected to the system
6. DAB landing screen is active
Steps:
1. Select Browse option from DAB Landing screen
2. Select last station of last multiplex (Multiplex having the highest frequency)
3. Short press Seek_Next arrow from DAB landing screen
Expected Result:
1. DAB station list shall be displayed
2. Selected DAB station shall be played
3. First station of the first multiplex (Multiplex having the lowest frequency) shall be tuned. Current station number and total number of stations in current multiplex shall be displayed on the screen. |
167 | The user shall be able to select tuner source using user interface. | Title: Tuner DAB Source change using HMI Interface
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. DAB modulator is connected with the system and DAB streaming is in progress
5. System BTEL_BROADCAST_RAD_NUM_BA parameter value is set to 'World Wide'
Steps:
1. Select Radio application from the control bar
2. Select Band option from landing screen
3. Select the DAB band from the drop down
Expected Result:
1. Radio application shall be launched
2. AM/FM/DAB Band Selection Dropdown shall be displayed
3. DAB source shall be selected and DAB landing screen shall be displayed |
168 | There shall be one station list for each tuner source (AM/FM). | Title: Station list for AM
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Select Browse option from AM landing screen
2. Scroll down AM station list
3. Press Back button
Expected Result:
1. AM station list shall be displayed
2. AM frequencies with kHz unit shall be listed along with respective preset numbers for each stations. Refresh and Back button are available. Currently streaming station shall be highlighted
3. AM landing screen shall be displayed
Title: Station list for FM
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Select Browse option from FM landing screen
2. Scroll down FM station list
3. Press Back button
Expected Result:
1. FM station list shall be displayed
2. FM frequencies with MHz unit shall be listed along with respective station name and preset numbers for each stations.
- Program type and Alternative Frequency will also be listed if turned on in Radio settings. Refresh and Back button are available.
- Currently streaming station shall be highlighted
3. FM landing screen shall be displayed |
169 | Tuner Autoseek shall be independent of Station list. | Title: Auto seek up operation for AM band
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Press Auto Seek_Next arrow from AM landing screen
Expected Result:
1. Auto seek up operation shall start and next available station shall be played. 'Seeking.." shall be displayed instead of station frequency. Station frequency
will be changed continuously according to seeking. Auto seek up shall be independent of available station list
Title: Auto seek down operation for AM band
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Press Auto Seek_Previous arrow from AM landing screen
Expected Result:
1. Auto seek down operation shall start and previous available station shall be played. 'Seeking.." shall be displayed instead of station frequency. Station frequency
will be changed continuously according to seeking. Auto seek down shall be independent of available station list
Title: Auto seek up operation for FM band
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Press Auto Seek_Next arrow from FM landing screen
Expected Result:
1. Auto seek up operation shall start and next available station shall be played. 'Seeking.." shall be displayed instead of station name and station frequency
will be changed continuously according to seeking. Auto seek up shall be independent of available station list
Title: Auto seek down operation for FM band
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Press Auto Seek_Previous arrow from FM landing screen
Expected Result:
1. Auto seek down operation shall start and previous available station shall be played. 'Seeking.." shall be displayed instead of station name and station frequency
will be changed continuously according to seeking. Auto seek down shall be independent of available station list |
170 | Tuner data (station list, last tuned station information and preset information) shall be stored into persistency and available across ignition cycles and source switches. | Title: AM station list persists during Ignition cycle
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Perform Ignition cycle (Ignition OFF-> Ignition ON)
3. Select Radio application from Home screen and launch AM source
4. Select Browse option from AM landing screen
Expected Result:
1. AM station list shall be displayed
2. System shall be turned ON after igniton cycle
3. AM landing screen shall be displayed
4. AM station list shall persist after Ignition cycle
Title: Last tuned AM station information persistency during Ignition cycle
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
Steps:
1. Select Browse option from AM Landing screen
2. Select any station from the list
3. Perform Ignition cycle (Ignition OFF-> Ignition ON)
4. Press Radio button from control bar and launch AM source
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. System shall be turned ON after Ignition cycle
4. Radio application shall be displayed. Last tuned AM station information shall be displayed and station shall be streamed
Title: AM Preset List persistency during Ignition cycle
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
6. Few AM stations are added as presets
Steps:
1. Select Browse option from AM Landing screen
2. Select a station from the list
3. Long press on any preset number from AM landing screen
4. Perform Ignition cycle (Ignition OFF-> Ignition ON)
5. Press Radio button from control bar and launch AM source
6. Observe Preset list
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Currently tuned AM station shall be stored as a preset, to the pressed preset number
4. System shall be turned ON after Ignition cycle
5. Radio application shall be displayed
6. Preset list available before ignition cycle shall remain same
Title: Tuner data after switching from USB Media to AM Radio
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
6. USB device having valid audio files is connected to System
7. Few AM stations are added as presets
Steps:
1. Select Browse option from AM Landing screen
2. Select any station from the list
3. Observe the available preset list
4. Press Media icon from left side of Radio screen
5. Launch USB Media source from MyDevice icon
6. Select List option and play a song from any library folder
7. Press Radio icon from left side of Media screen
8. Observe Station list and Preset list
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Currently available preset list shall be displayed
4. Media screen shall be displayed. AM streaming shall be stopped
5. USB Media source shall be launched
6. Selected song shall be played
7. Previously tuned AM station shall be streamed and station information shall be displayed
8. Station list and Preset list shall remain same as before source switch
Title: Tuner data after switching from iPod Media to AM Radio
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
6. iPod device having valid audio files is connected to System
7. Few AM stations are added as presets
Steps:
1. Select Browse option from AM Landing screen
2. Select any station from the list
3. Observe the available preset list
4. Press Media icon from left side of Radio screen
5. Launch iPod Media source from MyDevice icon
6. Select List option and play a song from any library folder
7. Press Radio icon from left side of Media screen
8. Observe Station list and Preset list
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Currently available preset list shall be displayed
4. Media screen shall be displayed. AM streaming shall be stopped
5. iPod Media source shall be launched
6. Selected song shall be played
7. Previously tuned AM station shall be streamed and station information shall be displayed
8. Station list and Preset list shall remain same as before source switch
Title: Tuner data after switching from BT Media to AM Radio
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
6. BT device having valid audio files is connected to System
7. Few AM stations are added as presets
Steps:
1. Select Browse option from AM Landing screen
2. Select any station from the list
3. Observe the available preset list
4. Press Media icon from left side of Radio screen
5. Launch BT Media source from MyDevice icon
6. Select List option and play a song from any library folder
7. Press Radio icon from left side of Media screen
8. Observe Station list and Preset list
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Currently available preset list shall be displayed
4. Media screen shall be displayed. AM streaming shall be stopped
5. BT Media source shall be launched
6. Selected song shall be played
7. Previously tuned AM station shall be streamed and station information shall be displayed
8. Station list and Preset list shall remain same as before source switch
Title: Tuner data after switching from AM to FM Radio
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
6. Few AM stations are added as presets
Steps:
1. Select Browse option from AM Landing screen
2. Select any station from the list
3. Observe the available preset list
4. Press Band option and launch FM source
5. Select Browse option from FM Landing screen
6. Select any station from the list
7. Press Band option and launch AM source
8. Observe Station list and Preset list
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Currently available preset list shall be displayed
4. FM Source shall be launched
5. FM station list shall be displayed
6. Selected FM station shall be played
7. Previously tuned AM station shall be streamed and station information shall be displayed
8. Station list and Preset list shall remain same as before source switch
Title: FM station list persists during Ignition cycle
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Perform Ignition cycle (Ignition OFF-> Ignition ON)
3. Select Radio application from Home screen and launch FM source
4. Select Browse option from FM landing screen
Expected Result:
1. FM station list shall be displayed
2. System shall be turned ON after igniton cycle
3. FM landing screen shall be displayed
4. FM station list shall persist after Ignition cycle
Title: Last tuned FM station information persistency during Ignition cycle
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
Steps:
1. Select Browse option from FM Landing screen
2. Select any station from the list
3. Perform Ignition cycle (Ignition OFF-> Ignition ON)
4. Press Radio button from control bar and launch FM source
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. System shall be turned ON after Ignition cycle
4. Radio application shall be displayed. Last tuned FM station information (Station name, frequency and Radio Text if available) shall be displayed and station shall be streamed
Title: FM Preset List persistency during Ignition cycle
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Few FM stations are added as presets
Steps:
1. Select Browse option from FM Landing screen
2. Select a station from the list
3. Long press on any preset number from FM landing screen
4. Perform Ignition cycle (Ignition OFF-> Ignition ON)
5. Press Radio button from control bar and launch FM source
6. Observe Preset list
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Currently tuned FM station shall be stored as a preset, to the pressed preset number
4. System shall be turned ON after Ignition cycle
5. Radio application shall be displayed
6. Preset list available before ignition cycle shall remain same
Title: Tuner data after switching from USB Media to FM Radio
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. USB device having valid audio files is connected to System
7. Few FM stations are added as presets
Steps:
1. Select Browse option from FM Landing screen
2. Select any station from the list
3. Observe the available preset list
4. Press Media icon from left side of Radio screen
5. Launch USB Media source from MyDevice icon
6. Select List option and play a song from any library folder
7. Press Radio icon from left side of Media screen
8. Observe Station list and Preset list
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Currently available preset list shall be displayed
4. Media screen shall be displayed. FM streaming shall be stopped
5. USB Media source shall be launched
6. Selected song shall be played
7. Previously tuned FM station shall be streamed and station information shall be displayed
8. Station list and Preset list shall remain same as before source switch
Title: Tuner data after switching from iPod Media to FM Radio
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. iPod device having valid audio files is connected to System
7. Few FM stations are added as presets
Steps:
1. Select Browse option from FM Landing screen
2. Select any station from the list
3. Observe the available preset list
4. Press Media icon from left side of Radio screen
5. Launch iPod Media source from MyDevice icon
6. Select List option and play a song from any library folder
7. Press Radio icon from left side of Media screen
8. Observe Station list and Preset list
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Currently available preset list shall be displayed
4. Media screen shall be displayed. FM streaming shall be stopped
5. iPod Media source shall be launched
6. Selected song shall be played
7. Previously tuned FM station shall be streamed and station information shall be displayed
8. Station list and Preset list shall remain same as before source switch
Title: Tuner data after switching from BT Media to FM Radio
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. BT device having valid audio files is connected to System
7. Few FM stations are added as presets
Steps:
1. Select Browse option from FM Landing screen
2. Select any station from the list
3. Observe the available preset list
4. Press Media icon from left side of Radio screen
5. Launch BT Media source from MyDevice icon
6. Select List option and play a song from any library folder
7. Press Radio icon from left side of Media screen
8. Observe Station list and Preset list
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Currently available preset list shall be displayed
4. Media screen shall be displayed. FM streaming shall be stopped
5. BT Media source shall be launched
6. Selected song shall be played
7. Previously tuned FM station shall be streamed and station information shall be displayed
8. Station list and Preset list shall remain same as before source switch
Title: Tuner data after switching from FM to AM Radio
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Few FM stations are added as presets
Steps:
1. Select Browse option from FM Landing screen
2. Select any station from the list
3. Observe the available preset list
4. Press Band option and launch AM source
5. Select Browse option from AM Landing screen
6. Select any station from the list
7. Press Band option and launch FM source
8. Observe Station list and Preset list
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Currently available preset list shall be displayed
4. AM Source shall be launched
5. AM station list shall be displayed
6. Selected AM station shall be played
7. Previously tuned FM station shall be streamed and station information shall be displayed
8. Station list and Preset list shall remain same as before source switch |
171 | Tuner functionalities shall be available in FULL RUN, EXTENDED and ONE HOUR modes, except in USER OFF. | Title: AM functionalities in Full Run Mode
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
6. Few AM stations are added as presets
Steps:
1. Select Browse option from AM Landing screen
2. Select any station from the list
3. Press manual Seek_Previous arrow from AM landing screen
4. Press manual Seek_Next arrow from AM landing screen
5. Select any Preset station from AM landing screen
6. Press Auto Seek_Previous arrow from AM landing screen
7. Press manual Seek_Previous arrow from AM landing screen
8. Press Auto Seek_Next arrow from AM landing screen
9. Press manual Seek_Next arrow from AM landing screen
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Previous AM station with a step frequency decreased by 1 KHz shall be tuned/seeked
4. Next AM station with a step frequency increased by 1KHz shall be tuned/seeked
5. Selected preset station shall be played
6. Auto seek down operation shall start and previous available station shall be played. 'Seeking.." shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
7. Auto seek down operation shall be aborted and last tuned frequency shall be played
8. Auto seek up operation shall start and next available station shall be played. 'Seeking.." shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
9. Auto seek up operation shall be aborted and last tuned frequency shall be played
Title: AM functionalities in Extended Mode
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Extended Mode (KEY_POS to 0 ( STOP))
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
6. Few AM stations are added as presets
Steps:
1. Select Browse option from AM Landing screen
2. Select any station from the list
3. Press manual Seek_Previous arrow from AM landing screen
4. Press manual Seek_Next arrow from AM landing screen
5. Select any Preset station from AM landing screen
6. Press Auto Seek_Previous arrow from AM landing screen
7. Press manual Seek_Previous arrow from AM landing screen
8. Press Auto Seek_Next arrow from AM landing screen
9. Press manual Seek_Next arrow from AM landing screen
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Previous AM station with a step frequency decreased by 1 KHz shall be tuned/seeked
4. Next AM station with a step frequency increased by 1kHz shall be tuned/seeked
5. Station stored as preset shall be played
6. Auto seek down operation shall start and previous available station shall be played. 'Seeking.." shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
7. Auto seek down operation shall be aborted and last tuned frequency shall be played
8. Auto seek up operation shall start and next available station shall be played. 'Seeking.." shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
9. Auto seek up operation shall be aborted and last tuned frequency shall be played
Title: AM functionalities in User OFF Mode
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
6. Few AM stations are added as presets
Steps:
1. Select Browse option from AM Landing screen
2. Select any station from the list
3. Press manual Seek_Previous arrow from AM landing screen
4. Press manual Seek_Next arrow from AM landing screen
5. Select any Preset station from AM landing screen
6. Enable User OFF mode from System
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Previous AM station with a step frequency decreased by 1 KHz shall be tuned/seeked
4. Next AM station with a step frequency increased by 1kHz shall be tuned/seeked
5. Selected preset station shall be played
6. System shall be entered into User OFF mode and AM Functionalities shall be unavailable in User OFF mode
Title: AM functionalities in One Hour Mode
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in One Hour Mode(KEY_POS to 3 ( ACC ))
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
6. Few AM stations are added as presets
Steps:
1. Select Browse option from AM Landing screen
2. Select any station from the list
3. Press manual Seek_Previous arrow from AM landing screen
4. Press manual Seek_Next arrow from AM landing screen
5. Select any Preset station from AM landing screen
6. Press Auto Seek_Previous arrow from AM landing screen
7. Press manual Seek_Previous arrow from AM landing screen
8. Press Auto Seek_Next arrow from AM landing screen
9. Press manual Seek_Next arrow from AM landing screen
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. Previous AM station with a step frequency decreased by 1 KHz shall be tuned/seeked
4. Next AM station with a step frequency increased by 1kHz shall be tuned/seeked
5. Station stored as preset shall be played
6. Auto seek down operation shall start and previous available station shall be played. 'Seeking.." shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
7. Auto seek down operation shall be aborted and last tuned frequency shall be played
8. Auto seek up operation shall start and next available station shall be played. 'Seeking.." shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
9. Auto seek up operation shall be aborted and last tuned frequency shall be played
Title: FM functionalities in Full Run Mode
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Few FM stations are added as presets
Steps:
1. Select Browse option from FM Landing screen
2. Select any station from the list
3. Press manual Seek_Previous arrow from FM landing screen
4. Press manual Seek_Next arrow from FM landing screen
5. Select any Preset station from FM landing screen
6. Press Auto Seek_Previous arrow from FM landing screen
7. Press manual Seek_Previous arrow from FM landing screen
8. Press Auto Seek_Next arrow from FM landing screen
9. Press manual Seek_Next arrow from FM landing screen
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Previous FM station with a step frequency decreased by 0.05 MHz shall be tuned/seeked
4. Next FM station with a step frequency increased by 0.05 MHz shall be tuned/seeked
5. Station stored as preset shall be played
6. Auto seek down operation shall start and previous available station shall be played. 'Seeking.." shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
7. Auto seek down operation shall be aborted and last tuned frequency shall be played
8. Auto seek up operation shall start and next available station shall be played. 'Seeking.." shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
9. Auto seek up operation shall be aborted and last tuned frequency shall be played
Title: FM functionalities in Extended Mode
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Extended Mode (KEY_POS to 0 ( STOP))
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Few FM stations are added as presets
Steps:
1. Select Browse option from FM Landing screen
2. Select any station from the list
3. Press manual Seek_Previous arrow from FM landing screen
4. Press manual Seek_Next arrow from FM landing screen
5. Select any Preset station from FM landing screen
6. Press Auto Seek_Previous arrow from FM landing screen
7. Press manual Seek_Previous arrow from FM landing screen
8. Press Auto Seek_Next arrow from FM landing screen
9. Press Manual Seek_Next arrow from FM landing screen
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Previous FM station with a step frequency decreased by 0.05 MHz shall be tuned/seeked
4. Next FM station with a step frequency increased by 0.05 MHz shall be tuned/seeked
5. Station stored as preset shall be played
6. Auto seek down operation shall start and previous available station shall be played. 'Seeking.." shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
7. Auto seek down operation shall be aborted and last tuned frequency shall be played
8. Auto seek up operation shall start and next available station shall be played. 'Seeking.." shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
9. Auto seek up operation shall be aborted and last tuned frequency shall be played
Title: FM functionalities in User OFF Mode
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Few FM stations are added as presets
Steps:
1. Select Browse option from FM Landing screen
2. Select any station from the list
3. Press manual Seek_Previous arrow from FM landing screen
4. Press manual Seek_Next arrow from FM landing screen
5. Select any Preset station from FM landing screen
6. Enable User OFF mode from System
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Previous FM station with a step frequency decreased by 0.05 MHz shall be tuned/seeked
4. Next FM station with a step frequency increased by 0.05 MHz shall be tuned/seeked
5. Selected preset station shall be played
6. System shall be entered into User OFF mode and FM Functionalities shall be unavailable in User OFF mode
Title: FM functionalities in One Hour Mode
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in One Hour Mode(KEY_POS to 3 ( ACC ))
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Few FM stations are added as presets
Steps:
1. Select Browse option from FM Landing screen
2. Select any station from the list
3. Press manual Seek_Previous arrow from FM landing screen
4. Press manual Seek_Next arrow from FM landing screen
5. Select any Preset station from FM landing screen
6. Press Auto Seek_Previous arrow from FM landing screen
7. Press manual Seek_Previous arrow from FM landing screen
8. Press Auto Seek_Next arrow from FM landing screen
9. Press manual Seek_Next arrow from FM landing screen
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. Previous FM station with a step frequency decreased by 0.05 MHz shall be tuned/seeked
4. Next FM station with a step frequency increased by 0.05 MHz shall be tuned/seeked
5. Station stored as preset shall be played
6. Auto seek down operation shall start and previous available station shall be played. 'Seeking.." shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
7. Auto seek down operation shall be aborted and last tuned frequency shall be played
8. Auto seek up operation shall start and next available station shall be played. 'Seeking.." shall be displayed instead of station name and station frequency
will be changed continuously according to seeking
9. Auto seek up operation shall be aborted and last tuned frequency shall be played |
172 | Tuner shall temporary mute during Manual Station List update. | Title: Audio is muted during AM Manual station list update
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select any station from the list
3. Select Browse option from AM landing screen
4. Press Refresh option available in AM station list
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. AM station list shall be displayed
4. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram. Tuner audio is muted during AM manual station list update
Title: Audio is muted during FM Manual station list update
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select any station from the list
3. Select Browse option from FM landing screen
4. Press Refresh option available in FM station list
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. FM station list shall be displayed
4. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram. Tuner audio is muted during FM manual station list update |
173 | Tuner shall tune to the frequency of the user selected preset station.
| Title: Streaming an AM preset station
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
6. Few AM stations are added as presets
Steps:
1. Select a preset, from the preset list
Expected Result:
1. AM station stored to selected preset shall be played and associated preset index shall be highlighted in AM landing screen
Title: Streaming an FM preset station
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Few FM stations are added as presets
Steps:
1. Select a preset, from the preset list
Expected Result:
1. FM station stored to selected preset shall be played and associated preset index shall be highlighted in FM landing screen |
174 | Tuner will display blank if PS Name is not available.
Note: when first tune to a RDS station | Title: PS name field displayed as blank when PS name data is not available for the stations.
Preconditions:
1.System is up and running (ACC ON->IGN ON).
2.Launch FM landing screen from band option.
3.TRX011 plugged with freq 101.6.
Steps:
1.From FM landing screen tune to 101.6 MHz.
2.On TRX, set PS name as blank.
3.Select 'Station List Browse' icon.
Expected Result:
1.101.6 FM station should be playing.
2.Blank PS name should be selected on TRX.
3.PS name field should be displayed as blank when, PS name data is not available for the stations. |
175 | User shall be able to abort the on-going seek operation. | Title: For AM band Seek operation is cancelled when seek up button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Press Auto Seek_Next arrow from AM landing screen
2. Press manual Seek_Next arrow from AM landing screen during auto seek
Expected Result:
1. Auto seek up operation is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek up operation shall be aborted and tuned to last frequency where seek is aborted
Title: AM - Autoseek cancelled when seek down button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Press Auto Seek_Previous arrow from AM landing screen
2. Press manual Seek_Previous arrow from AM landing screen during auto seek
Expected Result:
1. Auto seek down operation is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek down operation shall be aborted and tuned to last frequency where seek is aborted
Title: FM - Autoseek cancelled when seek up button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Press Auto Seek_Next arrow from FM landing screen
2. Press manual Seek_Next arrow from FM landing screen during auto seek
Expected Result:
1. Auto seek up operation is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek up operation shall be aborted and tuned to last frequency where seek is aborted
Title: FM - Autoseek cancelled when seek down button is pressed
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Press Auto Seek_Previous arrow from FM landing screen
2. Press manual Seek_Next arrow from FM landing screen during auto seek
Expected Result:
1. Auto seek down operation is started. Station name is replaced by “Seeking...” and station frequency
shall be changed continuously according to station seeking
2. Auto seek down operation shall be aborted and tuned to last frequency where seek is aborted |
176 | User shall be able to associate a station to a preset from station list | Title: Streaming an AM preset station
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
6. Few AM stations are added as presets
Steps:
1. Select a preset, from the preset list
Expected Result:
1. AM station stored to selected preset shall be played and associated preset index shall be highlighted in AM landing screen
Title: Streaming an FM preset station
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Few FM stations are added as presets
Steps:
1. Select a preset, from the preset list
Expected Result:
1. FM station stored to selected preset shall be played and associated preset index shall be highlighted in FM landing screen |
177 | User shall be able to associate the current tuned station to a preset
| Title: Storing currently tuned AM station as preset
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active and AM streaming is in progress
Steps:
1. Long press on any preset number from AM landing screen
Expected Result:
1. Currently tuned AM station shall be stored as a preset, to the pressed preset number and Preset number shall be highlighted
Title: Storing currently tuned FM station as preset
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active and FM streaming is in progress
Steps:
1. Long press on any preset number from FM landing screen
Expected Result:
1. Currently tuned FM station shall be stored as a preset, to the pressed preset number and Preset number shall be highlighted |
178 | User shall be able to browse through the station list without impacting the currently tuned station. | Title: AM Station list browsing
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Select any station from the list
3. Select Browse option from AM landing screen
4. Scroll down AM station list
Expected Result:
1. AM station list shall be displayed
2. Selected AM station shall be played
3. AM station list shall be displayed
4. AM station list can be browsed without affecting the currently tuned station
Title: FM Station list browsing
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Select any station from the list
3. Select Browse option from FM landing screen
4. Scroll down FM station list
Expected Result:
1. FM station list shall be displayed
2. Selected FM station shall be played
3. FM station list shall be displayed
4. FM station list can be browsed without affecting the currently tuned station |
179 | User shall be able to cancel the ongoing station list update | Title: AM station list manual update cancellation
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. AM landing screen is active
Steps:
1. Select Browse option from AM landing screen
2. Press Refresh option available in AM station list
3. Press Cancel button from Station list update popup
Expected Result:
1. AM station list shall be displayed
2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram
3. Manual station list update is cancelled and previous AM station list is restored
Title: FM station list manual update cancellation
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
Steps:
1. Select Browse option from FM landing screen
2. Press Refresh option available in FM station list
3. Press Cancel button from Station list update popup
Expected Result:
1. FM station list shall be displayed
2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram
3. Manual station list update is cancelled and previous FM station list is restored |
180 | User shall be able to enable or disable REG configuration.
| Title: Regional Mode (REG) setting to 'ON'
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Regional Mode (REG) setting is set to 'OFF'
Steps:
1. Select Settings option from FM landing screen
2. Turn ON Regional Mode (REG) settings option
Expected Result:
1. Radio settings screen shall be displayed
2. Regional Mode (REG) setting shall be set to 'ON'
Title: Regional Mode (REG) setting to 'OFF'
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Regional Mode (REG) setting is set to 'ON'
Steps:
1. Select Settings option from FM landing screen
2. Turn OFF Regional Mode (REG) settings option
Expected Result:
1. Radio settings screen shall be displayed
2. Regional Mode (REG) setting shall be set to 'OFF'
Title: Regional Mode (REG) setting to 'ON' persistency
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Regional Mode (REG) setting is set to 'OFF'
Steps:
1. Select Settings option from FM landing screen
2. Turn ON Regional Mode (REG) settings option
3. Press Home button from control bar
4. Press Radio button from control bar
5. Select Settings option from FM landing screen
Expected Result:
1. Radio settings screen shall be displayed
2. Regional Mode (REG) setting shall be set to 'ON'
3. Home screen shall be displayed
4. Radio application shall be displayed
5. Radio settings screen shall be displayed and Regional Mode (REG) setting shall remain 'ON'
Title: Regional Mode (REG) setting to 'OFF' persistency
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Regional Mode (REG) setting is set to 'ON'
Steps:
1. Select Settings option from FM landing screen
2. Turn OFF Regional Mode (REG) settings option
3. Press Home button from control bar
4. Press Radio button from control bar
5. Select Settings option from FM landing screen
Expected Result:
1. Radio settings screen shall be displayed
2. Regional Mode (REG) setting shall be set to 'OFF'
3. Home screen shall be displayed
4. Radio application shall be displayed
5. Radio settings screen shall be displayed and Regional Mode (REG) setting shall remain 'OFF'
Title: Regional Mode (REG) setting to 'ON' persistency during Ignition cycle
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Regional Mode (REG) setting is set to 'OFF'
Steps:
1. Select Settings option from FM landing screen
2. Turn ON Regional Mode (REG) settings option
3. Perform Ignition cycle (Ignition OFF-> Ignition ON)
4. Press Radio button from control bar
5. Select Settings option from FM landing screen
Expected Result:
1. Radio settings screen shall be displayed
2. Regional Mode (REG) setting shall be set to 'ON'
3. System shall be turned ON after Ignition cycle
4. Radio application shall be displayed
5. Radio settings screen shall be displayed and Regional Mode (REG) setting shall remain 'ON'
Title: Regional Mode (REG) setting to 'OFF' persistency during Ignition cycle
Preconditions:
1. Vehicle battery (Vbat) is ON
2. IGN is ON
3. System is in Full Run Mode
4. Radio antenna (AM_FM/DAB) is plugged to System
5. FM landing screen is active
6. Regional Mode (REG) setting is set to 'ON'
Steps:
1. Select Settings option from FM landing screen
2. Turn OFF Regional Mode (REG) settings option
3. Perform Ignition cycle (Ignition OFF-> Ignition ON)
4. Press Radio button from control bar
5. Select Settings option from FM landing screen
Expected Result:
1. Radio settings screen shall be displayed
2. Regional Mode (REG) setting shall be set to 'OFF'
3. System shall be turned ON after Ignition cycle
4. Radio application shall be displayed
5. Radio settings screen shall be displayed and Regional Mode (REG) setting shall remain 'OFF' |