Datasets:

piyushsalunke

/

tuner

like 0

"If following conditions are met, tuner start AF switching operation: - AF feature is on - The current station Signal quality is below quality_threshold. - PI code of AF shall match to current tuned station PI code. - The AF shall also meet the quality_threshold."

Title: AF switching Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active 6. Use France_Mobility_FM_ActiveAntenna_AF_Dourdan_24072016 (SSD10) streaming file in Lumantek signal generator for listing Alternate Frequencies 7. Alternative Frequency (AF) setting is set to 'ON' 8. Quality_Threshold for FM is set Steps: 1. Select Browse option from FM landing screen 2. Scroll down FM station list 3. Select 95.4 MHz from FM station list and wait for few seconds Expected Result: 1. FM station list shall be displayed 2. Alternate frequencies shall be available for 95.4 MHz frequency 3. Selected station shall be played and after few seconds, frequencies 95, or 94.9 or 106.5 or 87.8 shall be tuned. AF shall also meet the Quality_threshold

"Station list for FM shall offer the possibility to sort by frequency (ascending) or PS name (alphabetical). In case of sorting by PS name, the stations that have no PS name shall be listed at the end of the list, sorted according to their frequency."

Title: FM Station list sort - Frequency in ascending order Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active 6. Sort FM list by station name option is set to OFF in Radio settings screen Steps: 1. Select Browse option from FM landing screen 2. Scroll down FM station list Expected Result: 1. FM station list shall be displayed 2. FM station list shall be sorted by frequency in ascending order Title: FM Station list sort - Station name in alphabetical order Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active 6. Sort FM list by station name option is set to ON in Radio settings screen Steps: 1. Select Browse option from FM landing screen 2. Scroll down FM station list Expected Result: 1. FM station list shall be displayed 2. FM station list shall be sorted by station name in alphabetical order and the stations that have no station name shall be listed at the end of the station list, sorted according to their frequency.

A valid station is define when station's meet all the quailty_threshold value which shall be set during vehicle tuning.

Title: AM Stations meets quality threshold Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. Quailty_threshold value is set for AM band 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Press Refresh option available in AM station list 3. Wait till station list update is completed 4. Play each stations from station list Expected Result: 1. AM station list shall be displayed 2. "Station list updating..." text shall be displayed 3. Station list update shall be completed 4. Streaming audio from each AM station shall be clear, without any interferences Title: FM Stations meets quality threshold Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. Quailty_threshold (TBD) value is set for FM band 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Press Refresh option available in FM station list 3. Wait till station list update is completed 4. Play each stations from station list Expected Result: 1. FM station list shall be displayed 2. "Station list updating..." text shall be displayed 3. Station list update shall be completed 4. Streaming audio from each FM station shall be clear, without any interferences

Abort seek shall unmute the tuner audio.

Title: AM audio after aborting auto seek Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress Steps: 1. Press Auto Seek_Previous arrow from AM landing screen 2. Press manual Seek_Previous arrow from AM landing screen Expected Result: 1. Auto seek down shall start and previous available station shall be played. 'Seeking.." shall be displayed instead of station name and station frequency will be changed continuously according to seeking 2. Auto seek down shall be aborted. Tuner audio is unmuted and last tuned frequency shall be played Title: FM audio after aborting auto seek Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress Steps: 1. Press Auto Seek_Previous arrow from FM landing screen 2. Press manual Seek_Previous arrow from FM landing screen Expected Result: 1. Auto seek down shall start and previous available station shall be played. 'Seeking.." shall be displayed instead of station name and station frequency will be changed continuously according to seeking 2. Auto seek down shall be aborted. Tuner audio is unmuted and last tuned frequency shall be played

After aborting auto seek / tuner shall be tuned to last frequency where seek get aborted.

Title: For AM band Seek operation is cancelled when seek up button is pressed Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress Steps: 1. Press Auto Seek_Next arrow from AM landing screen 2. Press manual Seek_Next arrow from AM landing screen during auto seek Expected Result: 1. Auto seek up operation is started. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking 2. Auto seek up operation shall be aborted and tuned to last frequency where seek is aborted Title: AM - Autoseek cancelled when seek down button is pressed Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress Steps: 1. Press Auto Seek_Previous arrow from AM landing screen 2. Press manual Seek_Previous arrow from AM landing screen during auto seek Expected Result: 1. Auto seek down operation is started. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking 2. Auto seek down operation shall be aborted and tuned to last frequency where seek is aborted Title: FM - Autoseek cancelled when seek up button is pressed Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress Steps: 1. Press Auto Seek_Next arrow from FM landing screen 2. Press manual Seek_Next arrow from FM landing screen during auto seek Expected Result: 1. Auto seek up operation is started. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking 2. Auto seek up operation shall be aborted and tuned to last frequency where seek is aborted

After aborting auto seek, the system shall remain on the station where seek was aborted.

Title: Tuner tuned to last frequency after aborting auto seek using seek up for DAB band Preconditions: - System is up and running (ACC ON->IGN ON). - DAB antenna is plugged to tuner. - DAB landing screen is active. Steps: 1. Long press on next seek arrow to perform Auto seek. 2. Press next seek arrow while auto seek is in progress. Expected Result: 1. Auto seek shall be in progress. 2. Auto seek shall be aborted and tuned to the last frequency where seek gets aborted. Title: Tuner tuned to last frequency after aborting auto seek using seek down for DAB band Preconditions: - System is up and running (ACC ON->IGN ON). - DAB antenna is plugged to tuner. - DAB landing screen is active. Steps: 1. Long press on next seek arrow to perform Auto seek. 2. Press previous seek arrow while auto seek is in progress. Expected Result: 1. Auto seek shall be in progress. 2. Auto seek shall be aborted and tuned to the last frequency where seek gets aborted.

After an auto seek and once a valid station is locked in / the audio shall be unmuted

Title: AM audio muted during Auto seek up and unmuted when valid station is reached Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress Steps: 1. Press Auto Seek_Next arrow from AM landing screen 2. Wait till a valid station is reached during seeking Expected Result: 1. Auto seek up operation shall start 2. Tuner audio shall be muted during seek, and unmuted once next available station is reached Title: AM audio muted during Auto seek down and unmuted when valid station is reached Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress Steps: 1. Press Auto Seek_Previous arrow from AM landing screen 2. Wait till a valid station is reached during seeking Expected Result: 1. Auto seek down operation shall start 2. Tuner audio shall be muted during seek, and unmuted once next available station is reached Title: FM audio muted during Auto seek up and unmuted when valid station is reached Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress Steps: 1. Press Auto Seek_Next arrow from FM landing screen 2. Wait till a valid station is reached during seeking Expected Result: 1. Auto seek up operation shall start 2. Tuner audio shall be muted during seek, and unmuted once next available station is reached Title: FM audio muted during Auto seek down and unmuted when valid station is reached Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress Steps: 1. Press Auto Seek_Previous arrow from FM landing screen 2. Wait till a valid station is reached during seeking Expected Result: 1. Auto seek down operation shall start 2. Tuner audio shall be muted during seek, and unmuted once next available station is reached

After cancellation of the ongoing station list update / the initial station list shall be retained

Title: AM station list manual update cancellation Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Press Refresh option available in AM station list 3. Press Cancel button from Station list update popup Expected Result: 1. AM station list shall be displayed 2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram 3. Manual station list update is cancelled and previous AM station list is restored Title: FM station list manual update cancellation Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Press Refresh option available in FM station list 3. Press Cancel button from Station list update popup Expected Result: 1. FM station list shall be displayed 2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram 3. Manual station list update is cancelled and previous FM station list is restored

After completion of manual station list update / if the found valid stations are less than "NbMaxStationsInStationList" / then the remaining station in the station list shall remain empty.

Title: Station list entries after AM Manual station list update Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Press Refresh option available in AM station list 3. Wait till Station list update completes Expected Result: 1. AM station list shall be displayed 2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram 3. Updated AM station list shall be displayed and if found valid stations are less than 100, then remaining entries shall remain empty in AM station list Title: Station list entries after FM Manual station list update Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Press Refresh option available in FM station list 3. Wait till Station list update completes Expected Result: 1. FM station list shall be displayed 2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram 3. Updated FM station list shall be displayed and if found valid stations are less than 150, then remaining entries shall remain empty in FM station list

After completion of manual station list update, if the found valid stations are less than 400, then the remaining station in the station list shall remain empty.

Title: Station list with empty stations is displayed when less than 400 DAB stations found Preconditions: - System is up and running (ACC ON->IGN ON). - DAB antenna is plugged to tuner. - DAB landing screen is active. Steps: 1. Play 5B 176.640 MHz DAB station. 2. Select 'Station List Browse' icon and wait till DAB station list is displayed on screen. 3. Unplug antenna from Tuner. 4. Select 'Refresh' option to manually update the station list. Expected Result: 1. 5B 176.640 MHz DAB station shall be playing. 2. Station list shall be displayed. 3. The audio shall be lost. 4. Entries in DAB station list remains empty when number of valid DAB stations found is less than 400 after manual station list update.

After completion of manual station list update, the system shall tune back to the current station.

Title: Current DAB station is tuned after manual station list update Preconditions: - System is up and running (ACC ON->IGN ON). - DAB antenna is plugged to tuner. - DAB landing screen is active. - Attenuator is Plugged. - DAB is tuned to 5A 174.928 MHz and have strong signal strength. Steps: 1. Select 'Station List Browse' icon and wait till DAB station list is displayed on screen. 2. Select 'Refresh' option to manually update the station list. 3. Wait till updated DAB station list is displayed on screen. 4. Select 'Back' option. Expected Result: 1. Station list shall be displayed. 2. Updated station list shall be displayed. 3. Old DAB station list shall be replaced with updated DAB station list. 4. Current DAB station 5A 174.928 MHz shall be displayed and DAB audio is resumed.

After completion of the station list update, the resulting station list shall become the current station list.

Title: AM station list after manual update Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Press Refresh option available in AM station list 3. Wait till Station list update completes Expected Result: 1. AM station list shall be displayed 2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram 3. Updated AM station list shall be displayed Title: FM station list after manual update Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Press Refresh option available in FM station list 3. Wait till Station list update completes Expected Result: 1. FM station list shall be displayed 2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram 3. Updated FM station list shall be displayed

After factory reset / the behavior shall be same as described in “tuner startup”.

Title: FM Band is selected by default after first start Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Select a station from the list 3. Perform Factory Reset from Settings application 4. Select Radio application from Home screen Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. Factory Reset has been successfully performed 4. FM Band shall be selected by default. FM landing screen shall be displayed

After tuning / the station information shall be provided by tuner when available.

Title: Station information for a valid AM station after Auto seek up Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress Steps: 1. Press Auto Seek_Next arrow from AM landing screen 2. Wait till a valid station is reached during seeking Expected Result: 1. Auto seek up operation shall start. 'Seeking.." shall be displayed instead of station name and station frequency will be changed continuously according to seeking 2. Station information shall be displayed when next available station is tuned Title: Station information for a valid AM station after Auto seek down Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress Steps: 1. Press Auto Seek_Previous arrow from AM landing screen 2. Wait till a valid station is reached during seeking Expected Result: 1. Auto seek down operation shall start. 'Seeking.." shall be displayed instead of station name and station frequency will be changed continuously according to seeking 2. Station information shall be displayed when valid station is tuned Title: Station information for a valid FM station after Auto seek up Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress Steps: 1. Press Auto Seek_Next arrow from FM landing screen 2. Wait till a valid station is reached during seeking Expected Result: 1. Auto seek up operation shall start. 'Seeking.." shall be displayed instead of station name and station frequency will be changed continuously according to seeking 2. Station information shall be displayed when next available station is tuned Title: Station information for a valid FM station after Auto seek down Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress Steps: 1. Press Auto Seek_Previous arrow from FM landing screen 2. Wait till a valid station is reached during seeking Expected Result: 1. Auto seek down operation shall start. 'Seeking.." shall be displayed instead of station name and station frequency will be changed continuously according to seeking 2. Station information shall be displayed when valid station is tuned

All valid detected stations along with station information (frequency, station name, Preset stored etc.), when the station list is refreshed, shall be shown in the station list.

Title: AM station list after performing Refresh Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Press Refresh option available in AM station list 3. Wait till station list update is completed Expected Result: 1. AM station list shall be displayed 2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram 3. Station list update shall be completed. New stations and all previously detected stations along with station information (frequency, Preset stored), shall be shown in the station list Title: FM station list after performing Refresh Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Press Refresh option available in FM station list 3. Wait till station list update is completed Expected Result: 1. FM station list shall be displayed 2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram 3. Station list update shall be completed. New stations and all previously detected stations along with station information (frequency, station name, Preset stored), shall be shown in the station list

At the first connect of the system with DAB source activated, the Service Announcement function shall be disabled.

Title: Default State for DAB Service Announcements setting when previously set to ON Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. DAB landing screen is active 6. DAB Service Announcements setting is set to 'OFF' Steps: 1. Select Settings option from DAB landing screen 2. Turn ON DAB Service Announcements settings option 3. Perform Factory Reset from Settings application 4. Select Radio application from Home screen 5. Launch DAB source from Band option 6. Select Settings option from DAB landing screen and observe DAB Service Announcements setting Expected Result: 1. Radio settings screen shall be displayed 2. DAB Service Announcements setting shall be set to 'ON' 3. Factory Reset has been successfully performed 4. Radio application shall be displayed 5. DAB landing screen shall be displayed 6. Radio settings screen shall be displayed and by default DAB Service Announcements setting option shall be set to 'OFF' Title: Default State for DAB Service Announcements setting when previously set to OFF Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. DAB landing screen is active 6. DAB Service Announcements setting is set to 'ON' Steps: 1. Select Settings option from DAB landing screen 2. Turn OFF DAB Service Announcements settings option 3. Perform Factory Reset from Settings application 4. Select Radio application from Home screen 5. Launch DAB source from Band option 6. Select Settings option from DAB landing screen and observe DAB Service Announcements setting Expected Result: 1. Radio settings screen shall be displayed 2. DAB Service Announcements setting shall be set to 'OFF' 3. Factory Reset has been successfully performed 4. Radio application shall be displayed 5. DAB landing screen shall be displayed 6. Radio settings screen shall be displayed and by default DAB Service Announcements setting option shall be set to 'OFF'

By default / REG shall be OFF

Title: REG Configuration setting default behaviour when previously set to OFF Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active 6. Regional Mode (REG) setting is set to 'ON' Steps: 1. Select Settings option from FM landing screen 2. Turn OFF Regional Mode (REG) settings option 3. Perform Factory Reset from Settings application 4. Select Radio application from Home screen 5. Select Settings option from FM landing screen and observe Regional Mode (REG) settings option Expected Result: 1. Radio settings screen shall be displayed 2. Regional Mode (REG) setting shall be set to 'OFF' 3. Factory Reset has been successfully performed 4. Radio application shall be displayed 5. Radio settings screen shall be displayed and by default Regional Mode (REG) settings option shall be set to 'OFF' Title: Regional Mode (REG) setting default behaviour Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active 6. Regional Mode (REG) setting is set to 'OFF' Steps: 1. Select Settings option from FM landing screen 2. Turn ON Regional Mode (REG) settings option 3. Perform Factory Reset from Settings application 4. Select Radio application from Home screen 5. Select Settings option from FM landing screen and observe Regional Mode (REG) settings option Expected Result: 1. Radio settings screen shall be displayed 2. Regional Mode (REG) setting shall be set to 'ON' 3. Factory Reset has been successfully performed 4. Radio application shall be displayed 5. Radio settings screen shall be displayed and by default Regional Mode (REG) settings option shall be set to 'OFF'

By default / RT shall be ON

Title: Radio text setting default behaviour when previously set to ON Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active 6. Radio Text setting is set to 'OFF' Steps: 1. Select Settings option from FM landing screen 2. Turn ON Radio Text settings option 3. Perform Factory Reset from Settings application 4. Select Radio application from Home screen 5. Select Settings option from FM landing screen and observe Radio Text settings option Expected Result: 1. Radio settings screen shall be displayed 2. Radio Text setting shall be set to 'ON' 3. Factory Reset has been successfully performed 4. Radio application shall be displayed 5. Radio settings screen shall be displayed and by default Radio Text settings option shall be set to 'ON' Title: FM Radio text setting default behaviour Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active 6. Radio Text setting is set to 'ON' Steps: 1. Select Settings option from FM landing screen 2. Turn OFF Radio Text settings option 3. Perform Factory Reset from Settings application 4. Select Radio application from Home screen 5. Select Settings option from FM landing screen and observe Radio Text settings option Expected Result: 1. Radio settings screen shall be displayed 2. Radio Text setting shall be set to 'OFF' 3. Factory Reset has been successfully performed 4. Radio application shall be displayed 5. Radio settings screen shall be displayed and by default Radio Text settings option shall be set to 'ON'

By default, all presets shall be empty.

Title: Default preset behaviour for AM band Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. Factory reset has been performed from Settings in System Steps: 1. Select Radio application from System Home screen and launch AM source 2. Observe Preset list Expected Result: 1. AM landing screen shall be displayed 2. Preset list shall be empty and displayed as '--' Title: Default preset behaviour for FM band Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. Factory reset has been performed from Settings in System Steps: 1. Select Radio application from System Home screen and launch FM source 2. Observe Preset list Expected Result: 1. FM landing screen shall be displayed 2. Preset list shall be empty

By default, the DAB to FM seamless option is ON.

Title: Default State for DAB to FM seamless setting when previously set to ON Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. DAB landing screen is active 6. DAB to FM handover setting is set to 'OFF' Steps: 1. Select Settings option from DAB landing screen 2. Turn ON DAB to FM handover settings option 3. Perform Factory Reset from Settings application 4. Select Radio application from Home screen 5. Launch DAB source from Band option 6. Select Settings option from DAB landing screen and observe DAB to FM handover setting Expected Result: 1. Radio settings screen shall be displayed 2. DAB to FM handover setting shall be set to 'ON' 3. Factory Reset has been successfully performed 4. Radio application shall be displayed 5. DAB landing screen shall be displayed 6. Radio settings screen shall be displayed and by default DAB to FM handover setting option shall be set to 'ON' Title: Default State for DAB to FM seamless setting when previously set to OFF Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. DAB landing screen is active 6. DAB to FM handover setting is set to 'ON' Steps: 1. Select Settings option from DAB landing screen 2. Turn OFF DAB to FM handover settings option 3. Perform Factory Reset from Settings application 5. Select Radio application from Home screen 6. Launch DAB source from Band option 7. Select Settings option from DAB landing screen and observe DAB to FM handover setting Expected Result: 1. Radio settings screen shall be displayed 2. DAB to FM handover setting shall be set to 'OFF' 3. Factory Reset has been successfully performed 4. Radio application shall be displayed 5. DAB landing screen shall be displayed 6. Radio settings screen shall be displayed and by default DAB to FM handover setting option shall be set to 'ON'

DAB Tuner functionalities shall be available in FULL_RUN, EXTENDED_MODE and ONE_HOUR states of Power Management, except in USER OFF.

Title: DAB functionalities in Full Run Mode Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. DAB landing screen is active 6. Few DAB stations are added as presets Steps: 1. Select Browse option from DAB Landing screen 2. Select first station of a multiplex 3. Short press Seek_Previous arrow from DAB landing screen 4. Select any station (not the first/last station) of a multiplex 5. Short press Seek_Previous arrow from DAB landing screen 6. Select last station of a multiplex 7. Short press Seek_Next arrow from DAB landing screen 8. Select any station (not the first/last station) of a multiplex 9. Select any Preset station from DAB landing screen 10. Long press Seek_Previous arrow from DAB landing screen 11. Short press Seek_Previous arrow from DAB landing screen 12. Long press Seek_Next arrow from DAB landing screen 13. Short press Seek_Next arrow from DAB landing screen Expected Result: 1. DAB station list shall be displayed 2. Selected DAB station shall be played 3. Last station of the previous multiplex shall be tuned 4. Selected DAB station shall be played 5. Previous station of the current multiplex shall be tuned 6. Selected DAB station shall be played 7. First station of the next multiplex shall be tuned 8. Next station of the current multiplex shall be tuned 9. Station stored as preset shall be played 10. Auto seek down operation shall start. Station name shall be replaced by “Seeking...” and station number and multiplex number shall be changed continuously w.r.t station seeking 11. Auto seek down operation shall be aborted and last tuned station shall be played 12. Auto seek up operation shall start. Station name shall be replaced by “Seeking...” and station number and multiplex number shall be changed continuously w.r.t station seeking 13. Auto seek up operation shall be aborted and last tuned station shall be played Title: DAB functionalities in One Hour Mode Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in One Hour Mode(KEY_POS to 3 ( ACC )) 4. Radio antenna (AM_FM/DAB) is plugged to System 5. DAB landing screen is active 6. Few DAB stations are added as presets Steps: 1. Select Browse option from DAB Landing screen 2. Select first station of a multiplex 3. Short press Seek_Previous arrow from DAB landing screen 4. Select any station (not the first/last station) of a multiplex 5. Short press Seek_Previous arrow from DAB landing screen 6. Select last station of a multiplex 7. Short press Seek_Next arrow from DAB landing screen 8. Select any station (not the first/last station) of a multiplex 9. Select any Preset station from DAB landing screen 10. Long press Seek_Previous arrow from DAB landing screen 11. Short press Seek_Previous arrow from DAB landing screen 12. Long press Seek_Next arrow from DAB landing screen 13. Short press Seek_Next arrow from DAB landing screen Expected Result: 1. DAB station list shall be displayed 2. Selected DAB station shall be played 3. Last station of the previous multiplex shall be tuned 4. Selected DAB station shall be played 5. Previous station of the current multiplex shall be tuned 6. Selected DAB station shall be played 7. First station of the next multiplex shall be tuned 8. Next station of the current multiplex shall be tuned 9. Station stored as preset shall be played 10. Auto seek down operation shall start. Station name shall be replaced by “Seeking...” and station number and multiplex number shall be changed continuously w.r.t station seeking 11. Auto seek down operation shall be aborted and last tuned station shall be played 12. Auto seek up operation shall start. Station name shall be replaced by “Seeking...” and station number and multiplex number shall be changed continuously w.r.t station seeking 13. Auto seek up operation shall be aborted and last tuned station shall be played Title: DAB functionalities in Extended Mode Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Extended Mode (KEY_POS to 0 ( STOP)) 4. Radio antenna (AM_FM/DAB) is plugged to System 5. DAB landing screen is active 6. Few DAB stations are added as presets Steps: 1. Select Browse option from DAB Landing screen 2. Select first station of a multiplex 3. Short press Seek_Previous arrow from DAB landing screen 4. Select any station (not the first/last station) of a multiplex 5. Short press Seek_Previous arrow from DAB landing screen 6. Select last station of a multiplex 7. Short press Seek_Next arrow from DAB landing screen 8. Select any station (not the first/last station) of a multiplex 9. Select any Preset station from DAB landing screen 10. Long press Seek_Previous arrow from DAB landing screen 11. Short press Seek_Previous arrow from DAB landing screen 12. Long press Seek_Next arrow from DAB landing screen 13. Short press Seek_Next arrow from DAB landing screen Expected Result: 1. DAB station list shall be displayed 2. Selected DAB station shall be played 3. Last station of the previous multiplex shall be tuned 4. Selected DAB station shall be played 5. Previous station of the current multiplex shall be tuned 6. Selected DAB station shall be played 7. First station of the next multiplex shall be tuned 8. Next station of the current multiplex shall be tuned 9. Station stored as preset shall be played 10. Auto seek down operation shall start. Station name shall be replaced by “Seeking...” and station number and multiplex number shall be changed continuously w.r.t station seeking 11. Auto seek down operation shall be aborted and last tuned station shall be played 12. Auto seek up operation shall start. Station name shall be replaced by “Seeking...” and station number and multiplex number shall be changed continuously w.r.t station seeking 13. Auto seek up operation shall be aborted and last tuned station shall be played Title: DAB functionalities in User OFF Mode Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. DAB landing screen is active Steps: 1. Select Browse option from DAB Landing screen 2. Select any station from the list 3. Enable User OFF mode from System Expected Result: 1. DAB station list shall be displayed 2. Selected DAB station shall be played 3. System shall be entered into User OFF mode and DAB Functionalities shall be unavailable in User OFF mode

During AF switch / the audio shall be muted.

Title: Stored AF list from FM station list Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active 6. Use France_Mobility_FM_ActiveAntenna_AF_Dourdan_24072016 (SSD10) streaming file in Lumantek signal generator for listing Alternate Frequencies Steps: 1. Select Browse option from FM landing screen 2. Scroll down FM station list 3. Select 95.4 MHz from FM station list and wait for few seconds Expected Result: 1. FM station list shall be displayed 2. Alternate frequencies shall be available for 95.4 MHz frequency. 3. Selected station shall be played and after few seconds, frequencies 95, or 94.9 or 106.5 or 87.8 shall be tuned. Audio shall be muted during AF switch until valid station is tuned

During Auto seek / Audio shall be muted till the next valid station is locked in.

Title: AM audio muted during Auto seek up and unmuted when valid station is reached Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress Steps: 1. Press Auto Seek_Next arrow from AM landing screen 2. Wait till a valid station is reached during seeking Expected Result: 1. Auto seek up operation shall start 2. Tuner audio shall be muted during seek, and unmuted once next available station is reached Title: AM audio muted during Auto seek down and unmuted when valid station is reached Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress Steps: 1. Press Auto Seek_Previous arrow from AM landing screen 2. Wait till a valid station is reached during seeking Expected Result: 1. Auto seek down operation shall start 2. Tuner audio shall be muted during seek, and unmuted once next available station is reached Title: FM audio muted during Auto seek up and unmuted when valid station is reached Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress Steps: 1. Press Auto Seek_Next arrow from FM landing screen 2. Wait till a valid station is reached during seeking Expected Result: 1. Auto seek up operation shall start 2. Tuner audio shall be muted during seek, and unmuted once next available station is reached Title: FM audio muted during Auto seek down and unmuted when valid station is reached Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress Steps: 1. Press Auto Seek_Previous arrow from FM landing screen 2. Wait till a valid station is reached during seeking Expected Result: 1. Auto seek down operation shall start 2. Tuner audio shall be muted during seek, and unmuted once next available station is reached

During Manual seek / Audio shall be temporary muted till the next frequency is locked in.

Title: AM audio is muted during Manual seek up Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress Steps: 1. Short press Seek_Next arrow from AM landing screen 2. Continue to press Seek_Next arrow until a valid frequency is reached Expected Result: 1. Next AM station with a step frequency increased by 1 KHz shall be tuned/seeked 2. Tuner audio shall be muted during seek and, played once valid frequency is reached Title: AM audio is muted during Manual seek down Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress Steps: 1. Short press Seek_Previous arrow from AM landing screen 2. Continue to press Seek_Previous arrow until a valid frequency is reached Expected Result: 1. Previous AM station with a step frequency decreased by 1 KHz shall be tuned/seeked 2. Tuner audio shall be muted during seek and, played once valid frequency is reached Title: FM audio is muted during Manual seek up Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress Steps: 1. Short press Seek_Next arrow from FM landing screen 2. Continue to press Seek_Next arrow until a valid frequency is reached Expected Result: 1. Next FM station with a step frequency increased by 0.05MHz shall be tuned/seeked 2. Tuner audio shall be muted during seek and, played once valid frequency is reached Title: FM audio is muted during Manual seek down Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress Steps: 1. Short press Seek_Previous arrow from FM landing screen 2. Continue to press Seek_Previous arrow until a valid frequency is reached Expected Result: 1. Previous FM station with a step frequency decreased by 0.05MHz shall be tuned/seeked 2. Tuner audio shall be muted during seek and, played once valid frequency is reached

During a Manual seek down / when the lowest frequency of the band is reached / the tuner shall wrap around to last frequency and the seek shall continue.

Title: Manual seek down for lowest frequency when BROADCAST_AM_BAND = 3 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 3 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Scroll down AM station list and select the available lowest frequency station 3. Continue to press Seek_Previous arrow until the highest frequency is reached Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. The highest AM frequency displayed shall be 1629kHz and tuned Title: Manual seek down for lowest frequency when BROADCAST_AM_BAND = 2 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 2 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Scroll down AM station list and select the available lowest frequency station 3. Continue to press Seek_Previous arrow until the highest frequency is reached Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. The highest AM frequency displayed shall be 1602kHz and tuned Title: Manual seek down for lowest frequency when BROADCAST_AM_BAND = 4 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 4 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Scroll down AM station list and select the available lowest frequency station 3. Continue to press Seek_Previous arrow until the highest frequency is reached Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. The highest AM frequency displayed shall be 1701kHz and tuned Title: Manual seek down for lowest frequency when BROADCAST_AM_BAND = 5 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 5 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Scroll down AM station list and select the available lowest frequency station 3. Continue to press Seek_Previous arrow until the highest frequency is reached Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. The highest AM frequency displayed shall be 1710kHz and tuned Title: (MW and LW) Manual seek down for lowest frequency when BROADCAST_AM_BAND = 6 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 6 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Scroll down AM station list and select the available lowest frequency station 3. Continue to press Seek_Previous arrow until the highest frequency is reached Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. The highest AM frequency displayed shall be 1602kHz for MW and 279KHz for LW and tuned Title: LW-Manual seek down for lowest frequency when BROADCAST_AM_BAND = 7 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 7 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Scroll down AM station list and select the available lowest frequency station 3. Continue to press Seek_Previous arrow until the highest frequency is reached Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played. 3. The highest AM frequency displayed shall be 279kHz for LW and tuned. Title: MW-Manual seek down for lowest frequency when MW BROADCAST_AM_BAND = 7 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 7 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Scroll down AM station list and select the available lowest frequency station 3. Continue to press Seek_Previous arrow until the highest frequency is reached Expected Result: 1. AM station list shall be displayed. 2. Selected AM station shall be played. 3. The highest AM frequency displayed shall be 1629kHz for MW and tuned. Title: Manual seek down for lowest frequency when BROADCAST_AM_BAND = 1 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 1 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Scroll down AM station list and select the available lowest frequency station 3. Continue to press Seek_Previous arrow until the highest frequency is reached Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. The highest AM frequency displayed shall be 279kHz and tuned Title: Manual seek down for lowest frequency when BROADCAST_FM_BAND = 001 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 001 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Scroll down FM station list and select the available lowest frequency station 3. Continue to press Seek_Previous arrow until the highest frequency is reached Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. The highest FM frequency displayed shall be 95.0MHz and tuned Title: Manual seek down for lowest frequency when BROADCAST_FM_BAND = 100 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 100 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Scroll down FM station list and select the available lowest frequency station 3. Continue to press Seek_Previous arrow until the highest frequency is reached Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. The highest FM frequency displayed shall be 108.0MHz and tuned Title: Manual seek down for lowest frequency when BROADCAST_FM_BAND = 010 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 010 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Scroll down FM station list and select the available lowest frequency station 3. Continue to press Seek_Previous arrow until the highest frequency is reached Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. The highest FM frequency displayed shall be 108.0MHz and tuned Title: Manual seek down for lowest frequency when BROADCAST_FM_BAND = 011 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 011 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Scroll down FM station list and select the available lowest frequency station 3. Continue to press Seek_Previous arrow until the highest frequency is reached Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. The highest FM frequency displayed shall be 108.0MHz and tuned Title: Manual seek down for lowest frequency when BROADCAST_FM_BAND = 101 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 101 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Scroll down FM station list and select the available lowest frequency station 3. Continue to press Seek_Previous arrow until the highest frequency is reached Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. The highest FM frequency displayed shall be 108.0MHz and tuned Title: Manual seek down for lowest frequency when BROADCAST_FM_BAND = 110 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 110 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Scroll down FM station list and select the available lowest frequency station 3. Continue to press Seek_Previous arrow until the highest frequency is reached Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. The highest FM frequency displayed shall be 108.0MHz and tuned Title: Manual seek down for lowest frequency when BROADCAST_FM_BAND = 111 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 111 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Scroll down FM station list and select the available lowest frequency station 3. Continue to press Seek_Previous arrow until the highest frequency is reached Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. The highest FM frequency displayed shall be 108.0MHz and tuned

During a Manual seek up / when the highest frequency of the band is reached / the tuner shall wrap around to first frequency and the seek shall continue.

Title: Manual seek up for highest frequency when BROADCAST_AM_BAND = 3 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 3 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Scroll down AM station list and select the available highest frequency station 3. Continue to press Seek_Next arrow until the lowest frequency is reached Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. The lowest AM frequency displayed shall be 531kHz and tuned Title: Manual seek up for highest frequency when BROADCAST_AM_BAND = 2 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 2 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Scroll down AM station list and select the available highest frequency station 3. Continue to press Seek_Next arrow until the lowest frequency is reached Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. The lowest AM frequency displayed shall be 531kHz and tuned Title: Manual seek up for highest frequency when BROADCAST_AM_BAND = 4 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 4 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Scroll down AM station list and select the available highest frequency station 3. Continue to press Seek_Next arrow until the lowest frequency is reached Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. The lowest AM frequency displayed shall be 531kHz and tuned Title: Manual seek up for highest frequency when BROADCAST_AM_BAND = 5 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 5 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Scroll down AM station list and select the available highest frequency station 3. Continue to press Seek_Next arrow until the lowest frequency is reached Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. The lowest AM frequency displayed shall be 530kHz and tuned Title: Manual seek up for highest frequency when BROADCAST_AM_BAND = 1 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 1 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Scroll down AM station list and select the available highest frequency station 3. Continue to press Seek_Next arrow until the lowest frequency is reached Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. The lowest AM frequency displayed shall be 153kHz and tuned Title: (MW and LW)Manual seek up for highest frequency when BROADCAST_AM_BAND = 6 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 6 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Scroll down AM station list and select the available highest frequency station 3. Continue to press Seek_Next arrow until the lowest frequency is reached Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. The lowest AM frequency displayed shall be 153kHz for LW and 531KHZ for MW and tuned. Title: LW-Manual seek up for highest frequency when BROADCAST_AM_BAND = 7 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 7 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Scroll down AM station list and select the available highest frequency station 3. Continue to press Seek_Next arrow until the lowest frequency is reached Expected Result: 1. AM station list shall be displayed. 2. Selected AM station shall be played. 3. The lowest AM frequency displayed shall be 153kHz for LW and tuned. (LW range is 153 KHz to 279 KHz) Title: MW-Manual seek up for highest frequency when MW BROADCAST_AM_BAND = 7 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 7 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Scroll down AM station list and select the available highest frequency station 3. Continue to press Seek_Next arrow until the lowest frequency is reached Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. The lowest AM frequency displayed shall be 531 KHz for MW tuned. (MW range is 531KHz to 1629KHz) Title: Manual seek up for highest frequency when BROADCAST_FM_BAND = 001 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 001 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Scroll down FM station list and select the available highest frequency station 3. Continue to press Seek_Next arrow until the lowest frequency is reached Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. The lowest FM frequency displayed shall be 76.0MHz and tuned Title: Manual seek up for highest frequency when BROADCAST_FM_BAND = 100 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 100 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Scroll down FM station list and select the available highest frequency station 3. Continue to press Seek_Next arrow until the lowest frequency is reached Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. The lowest FM frequency displayed shall be 87.5MHz and tuned Title: Manual seek up for highest frequency when BROADCAST_FM_BAND = 010 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 010 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Scroll down FM station list and select the available highest frequency station 3. Continue to press Seek_Next arrow until the lowest frequency is reached Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. The lowest FM frequency displayed shall be 76.0MHz and tuned Title: Manual seek up for highest frequency when BROADCAST_FM_BAND = 011 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 010 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Scroll down FM station list and select the available highest frequency station 3. Continue to press Seek_Next arrow until the lowest frequency is reached Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. The lowest FM frequency displayed shall be 76.0MHz and tuned Title: Manual seek up for highest frequency when BROADCAST_FM_BAND = 101 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 101 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Scroll down FM station list and select the available highest frequency station 3. Continue to press Seek_Next arrow until the lowest frequency is reached Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. The lowest FM frequency displayed shall be 87.5MHz and tuned Title: Manual seek up for highest frequency when BROADCAST_FM_BAND = 110 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 110 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Scroll down FM station list and select the available highest frequency station 3. Continue to press Seek_Next arrow until the lowest frequency is reached Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. The lowest FM frequency displayed shall be 87.9MHz and tuned Title: Manual seek up for highest frequency when BROADCAST_FM_BAND = 111 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 111 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Scroll down FM station list and select the available highest frequency station 3. Continue to press Seek_Next arrow until the lowest frequency is reached Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. The lowest FM frequency displayed shall be 87.9MHz and tuned

During a Traffic Announcement (TA), system shall not allow another TA.

Title: Another TA is not allowed while a TA is playing during FM streaming Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. TA is enabled in radio settings 6. 2 FM modulators (TRX) are connected to System 7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator) Steps: 1. Generate a Traffic announcement via 1st TRX hardware 2. Select "Continue" from the System screen 3. Generate second Traffic announcement via 2nd TRX hardware, while first TA is playing Expected Result: 1. TA from FM shall be displayed on the System screen 2. Currently streaming FM station shall mute and Traffic announcement shall be played 3. Second TA shall not be allowed while first TA is playing

During a Traffic Announcement or PTY31, system shall mute the current source.

Title: FM radio mute during Traffic announcement Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM Modulator (TRX) is connected to System 6. TA is enabled in radio settings 7. FM landing screen is active and a FM station is streaming (Station not from connected TRX. Use either Live or other modulator) Steps: 1. Generate a Traffic announcement via FM modulator 2. Select "Continue" from the System screen 3. Dismiss the Traffic announcement or Wait till Traffic announcement is over Expected Result: 1. Traffic announcement from FM shall be displayed on the System screen 2. Currently streaming FM station shall mute and Traffic announcement shall be played 3. FM station shall unmute and restore streaming Title: FM radio mute during PTY31 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM Modulator (TRX) is connected to System 6. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator) Steps: 1. Generate a PTY31 via FM modulator 2. Select "Continue" from the System screen 3. Wait till PTY31 is over Expected Result: 1. PTY31 from FM shall be displayed on the System screen 2. Currently streaming FM station shall mute and PTY31 shall be played 3. FM station shall unmute and restore streaming Title: AM radio mute during Traffic announcement Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM and FM Modulator (TRX) is connected to System 6. TA is enabled in radio settings 7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator) Steps: 1. Select AM source from the Band option 2. Select Browse option and select any station 3. Generate a Traffic announcement via TRX 4. Select "Continue" from the System screen 5. Dismiss the Traffic announcement or Wait till Traffic announcement is over Expected Result: 1. AM Landing screen shall be launched 2. Selected AM station shall be played 3. TA from FM shall be displayed on the System screen 4. Currently streaming AM station shall mute and Traffic announcement shall be played 5. AM station shall unmute and restore streaming Title: AM radio mute during PTY31 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM and FM Modulator (TRX) is connected to System 6. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator) Steps: 1. Select AM source from the Band option 2. Select Browse option and select any station 3. Generate a PTY31 via TRX hardware 4. Select "Continue" from the System screen 5. Wait till PTY31 is over Expected Result: 1. AM Landing screen shall be launched 2. Selected AM station shall be played 3. PTY31 from FM shall be displayed on the System screen 4. Currently streaming AM station shall mute and PTY31 shall be played 2. AM station shall unmute and restore streaming Title: USB audio mute during Traffic announcement Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM Modulator (TRX) is connected to System 6. TA is enabled in Radio settings 7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator) 8. USB device having valid audio files is connected to System Steps: 1. Press Media icon from left side of Radio screen 2. Launch USB source from MyDevice icon 3. Select List option and play a song from any library folder 4. Generate a Traffic announcement via TRX 5. Select "Continue" from the System screen 6. Dismiss the Traffic announcement or Wait till Traffic announcement is over Expected Result: 1. Media screen shall be displayed 2. USB Media source shall be launched 3. Selected song shall be played 4. TA from FM shall be displayed on the System screen 5. Currently playing USB media shall mute and Traffic announcement shall be played 5. USB media shall unmute and restore playing once TA is completed Title: USB audio mute during PTY31 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM Modulator (TRX) is connected to System 6. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator) 7. USB device having valid audio files is connected to System Steps: 1. Press Media icon from left side of Radio screen 2. Launch USB source from MyDevice icon 3. Select List option and play a song from any library folder 4. Generate a PTY31 via TRX 5. Select "Continue" from the System screen 6. Wait till PTY31 is over Expected Result: 1. Media screen shall be displayed 2. USB Media source shall be launched 3. Selected song shall be played 4. PTY31 from FM shall be displayed on the System screen 5. Currently playing USB media shall mute and PTY31 shall be played 6. USB media shall unmute and restore playing once PTY31 is completed Title: BT audio mute during Traffic announcement Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM Modulator (TRX) is connected to System 6. TA is enabled in Radio settings 7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator) 8. BT device having valid audio files is connected to System Steps: 1. Press Media icon from left side of Radio screen 2. Launch BT source from MyDevice icon 3. Select List option and play a song from any library folder 4. Generate a Traffic announcement via TRX 5. Select "Continue" from the System screen 6. Dismiss the Traffic announcement or Wait till Traffic announcement is over Expected Result: 1. Media screen shall be displayed 2. BT Media source shall be launched 3. Selected song shall be played 4. TA from FM shall be displayed on the System screen 5. Currently playing BT media shall mute and Traffic announcement shall be played 6. BT media shall unmute and restore playing once TA is completed Title: BT audio mute during PTY31 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM Modulator (TRX) is connected to System 6. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator) 7. BT device having valid audio files is connected to System Steps: 1. Press Media icon from left side of Radio screen 2. Launch BT source from MyDevice icon 3. Select List option and play a song from any library folder 4. Generate a PTY31 via TRX 5. Select "Continue" from the System screen 6. Wait till PTY31 is over Expected Result: 1. Media screen shall be displayed 2. BT Media source shall be launched 3. Selected song shall be played 4. PTY31 from FM shall be displayed on the System screen 5. Currently playing BT media shall mute and PTY31 shall be played 6. BT media shall unmute and restore playing once TA is completed Title: iPod audio mute during Traffic announcement Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM Modulator (TRX) is connected to System 6. TA is enabled in radio settings 7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator) 8. iPod device having valid audio files is connected to System Steps: 1. Press Media icon from left side of Radio screen 2. Launch iPod source from MyDevice icon 3. Select List option and play a song from any library folder 4. Generate a Traffic announcement via TRX 5. Select "Continue" from the System screen 6. Dismiss the Traffic announcement or Wait till Traffic announcement is over Expected Result: 1. Media screen shall be displayed 2. iPod Media source shall be launched 3. Selected song shall be played 4. TA from FM shall be displayed on the System screen 5. Currently playing iPod media shall mute and Traffic announcement shall be played 6. iPod media shall unmute and restore playing once TA is completed Title: iPod audio mute during PTY31 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM Modulator (TRX) is connected to System 6. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator) 7. iPod device having valid audio files is connected to System Steps: 1. Press Media icon from left side of Radio screen 2. Launch iPod source from MyDevice icon 3. Select List option and play a song from any library folder 4. Generate a PTY31 via TRX 5. Select "Continue" from the System screen 6. Wait till PTY31 is over Expected Result: 1. Media screen shall be displayed 2. iPod Media source shall be launched 3. Selected song shall be played 4. PTY31 from FM shall be displayed on the System screen 5. Currently playing iPod media shall mute and PTY31 shall be played 5. iPod media shall unmute and restore playing once PTY31 is completed Title: DAB radio mute during Traffic announcement Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. DAB and FM Modulator (TRX) is connected to System 6. TA is enabled in radio settings 7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator) Steps: 1. Select DAB source from the Band option 2. Select Browse option and select any station 3. Generate a Traffic announcement via TRX 4. Select "Continue" from the System screen 5. Dismiss the Traffic announcement or Wait till Traffic announcement is over Expected Result: 1. DAB Landing screen shall be launched 2. Selected DAB station shall be played 3. TA from FM shall be displayed on the System screen 4. Currently streaming DAB station shall mute and Traffic announcement shall be played 5. DAB station shall unmute and restore streaming Title: DAB radio mute during PTY31 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. DAB and FM Modulator (TRX) is connected to System 6. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator) Steps: 1. Select DAB source from the Band option 2. Select Browse option and select any station 3. Generate a PTY31 via TRX hardware 4. Select "Continue" from the System screen 5. Wait till PTY31 is over Expected Result: 1. DAB Landing screen shall be launched 2. Selected DAB station shall be played 3. PTY31 from DAB shall be displayed on the System screen 4. Currently streaming DAB station shall mute and PTY31 shall be played 5. DAB station shall unmute and restore streaming

During a Traffic Announcement, if PTY31 is detected, then system shall interrupt the TA and play PTY31.

Title: PTY31 interrupts TA, during FM streaming Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. TA is enabled in radio settings 6. 2 FM modulators (TRX) are connected to System 7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator) Steps: 1. Generate a Traffic announcement via 1st TRX 2. Select "Continue" from the System screen 3. Generate PTY31 via 2nd TRX hardware, while TA is playing 4. Select "Continue" from the system screen 5. Repeat the step1 - step3 and wait for 5s Expected Result: 1. TA from FM shall be displayed on the System screen 2. Currently streaming FM station shall mute and Traffic announcement shall be heard 3. PTY31 shall be disaplayed on the screen 4. TA shall be interrupted and PTY31 shall be played 5. TA shall be interrupted and PTY31 shall be played Title: PTY31 interrupts TA, during USB playback Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. TA is enabled in radio settings 6. 2 FM modulators (TRX) are connected to System 7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator) 8. USB device having valid audio files is connected to System Steps: 1. Press Media icon from left side of Radio screen 2. Launch USB source from MyDevice icon 3. Select List option and play a song from any library folder 4. Generate a Traffic announcement via 1st TRX 5. Select "Continue" from the System screen 6. Generate PTY31 via 2nd TRX hardware, while TA is playing 7. Select "Continue" from the system screen 8. Repeat the step1 - step6 and wait for 5s Expected Result: 1. Media screen shall be displayed 2. USB Media source shall be launched 3. Selected song shall be played 4. TA from FM shall be displayed on the System screen 5. Currently playing USB media shall mute and Traffic announcement shall be heard 6. PTY31 shall be disaplayed on the screen 7. TA shall be interrupted and PTY31 shall be played 8. TA shall be interrupted and PTY31 shall be played Title: PTY31 interrupts TA, during iPod playback Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. TA is enabled in radio settings 6. 2 FM modulators (TRX) are connected to System 7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator) 8. iPod device having valid audio files is connected to System Steps: 1. Press Media icon from left side of Radio screen 2. Launch iPod source from MyDevice icon 3. Select List option and play a song from any library folder 4. Generate a Traffic announcement via 1st TRX 5. Select "Continue" from the System screen 6. Generate PTY31 via 2nd TRX hardware, while TA is playing 7. Select "Continue" from the system screen 8. Repeat the step1 - step6 and wait for 5s Expected Result: 1. Media screen shall be displayed 2. iPod Media source shall be launched 3. Selected song shall be played 4. TA from FM shall be displayed on the System screen 5. Currently playing iPod media shall mute and Traffic announcement shall be heard 6. PTY31 shall be disaplayed on the screen 7. TA shall be interrupted and PTY31 shall be played 8. TA shall be interrupted and PTY31 shall be played Title: PTY31 interrupts TA, during BT playback Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. TA is enabled in radio settings 6. 2 FM modulators (TRX) are connected to System 7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator) 8. BT device having valid audio files is connected to System Steps: 1. Press Media icon from left side of Radio screen 2. Launch BT source from MyDevice icon 3. Select List option and play a song from any library folder 4. Generate a Traffic announcement via 1st TRX 5. Select "Continue" from the System screen 6. Generate PTY31 via 2nd TRX hardware, while TA is playing 7. Select "Continue" from the system screen 8. Repeat the step1 - step6 and wait for 5s Expected Result: 1. Media screen shall be displayed 2. BT Media source shall be launched 3. Selected song shall be played 4. TA from FM shall be displayed on the System screen 5. Currently playing BT media shall mute and Traffic announcement shall be heard 6. PTY31 shall be disaplayed on the screen 7. TA shall be interrupted and PTY31 shall be played 8. TA shall be interrupted and PTY31 shall be played Title: PTY31 interrupts TA, during AM streaming Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. TA is enabled in radio settings 6. AM and 2 FM modulators (TRX) are connected to System 7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator) Steps: 1. Select AM source from the Band option 2. Select Browse option and select any station 3. Generate a Traffic announcement via 1st TRX 4. Select "Continue" from the System screen 5. Generate PTY31 via 2nd TRX hardware, while TA is playing 6. Select "Continue" from the system screen 7. Repeat the step1 - step5 and wait for 5s once PTY31 is displayed on the System Expected Result: 1. AM Landing screen shall be launched 2. Selected AM station shall be played 3. TA from FM shall be displayed on the System screen 4. Currently streaming AM station shall mute and Traffic announcement shall be heard 5. PTY31 shall be displayed on the screen 6. TA shall be interrupted and PTY31 shall be played 7. TA shall be interrupted and PTY31 shall be played Title: PTY31 interrupts TA, during DAB streaming Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. TA is enabled in radio settings 6. DAB and 2 FM modulators (TRX) are connected to System 7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator) Steps: 1. Select DAB source from the Band option 2. Select Browse option and select any station 3. Generate a Traffic announcement via 1st TRX 4. Select "Continue" from the System screen 5. Generate PTY31 via 2nd TRX hardware, while TA is playing 6. Select "Continue" from the system screen 7. Repeat the step1 - step5 and wait for 5s once PTY31 is displayed on the System Expected Result: 1. DAB Landing screen shall be launched 2. Selected DAB station shall be played 3. TA from FM shall be displayed on the System screen 4. Currently streaming DAB station shall mute and Traffic announcement shall be heard 5. PTY31 shall be displayed on the screen 6. TA shall be interrupted and PTY31 shall be played 7. TA shall be interrupted and PTY31 shall be played

During commutation from other audio sources to announcements in FM (TA or PTY31) or from announcements (TA or PTY31) to other audio sources, System shall not produce annoying sound parasites.

Title: Dismissing Traffic announcement after accepting, during FM streaming Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM Modulator (TRX) is connected to System 6. TA is enabled in radio settings 7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator) Steps: 1. Generate a Traffic announcement via TRX 2. Select "Continue" from the System screen 3. Dismiss the Traffic announcement Expected Result: 1. TA from FM shall be displayed on the System screen 2. Currently streaming FM station shall mute and Traffic announcement shall be played. There shall not be any annoying sound parasite during the transition from FM to TA 3. Traffic announcement shall be dismissed. FM station shall unmute and restore streaming. There shall not be any annoying sound parasite during the transition from TA to FM Title: Dismissing Traffic announcement after accepting, during USB playback Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM Modulator (TRX) is connected to System 6. TA is enabled in radio settings 7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator) 8. USB device having valid audio files is connected to System Steps: 1. Press Media icon from left side of Radio screen 2. Launch USB source from MyDevice icon 3. Select List option and play a song from any library folder 4. Generate a Traffic announcement via TRX 5. Select "Continue" from the System screen 6. Dismiss the Traffic announcement Expected Result: 1. Media screen shall be displayed 2. USB Media source shall be launched 3. Selected song shall be played 4. TA from FM shall be displayed on the System screen 5. Currently playing USB media shall mute and Traffic announcement shall be played. There shall not be any annoying sound parasite during the transition from USB to TA 6. Traffic announcement shall be dismissed. USB media shall unmute and restore playing. There shall not be any annoying sound parasite during the transition from TA to USB source Title: Dismissing Traffic announcement after accepting, during BT playback Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM Modulator (TRX) is connected to System 6. TA is enabled in radio settings 7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator) 8. BT device having valid audio files is connected to System Steps: 1. Press Media icon from left side of Radio screen 2. Launch BT source from MyDevice icon 3. Select List option and play a song from any library folder 4. Generate a Traffic announcement via TRX 5. Select "Continue" from the System screen 6. Dismiss the Traffic announcement Expected Result: 1. Media screen shall be displayed 2. BT Media source shall be launched 3. Selected song shall be played 4. TA from FM shall be displayed on the System screen 5. Currently playing BT media shall mute and Traffic announcement shall be played. There shall not be any annoying sound parasite during the transition from BT to TA 6. Traffic announcement shall be dismissed. BT media shall unmute and restore playing. There shall not be any annoying sound parasite during the transition from TA to BT Title: Dismissing Traffic announcement after accepting, during iPod playback Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM Modulator (TRX) is connected to System 6. TA is enabled in radio settings 7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator) 8. iPod device having valid audio files is connected to System Steps: 1. Press Media icon from left side of Radio screen 2. Launch iPod source from MyDevice icon 3. Select List option and play a song from any library folder 4. Generate a Traffic announcement via TRX 5. Select "Continue" from the System screen 6. Dismiss the Traffic announcement Expected Result: 1. Media screen shall be displayed 2. iPod Media source shall be launched 3. Selected song shall be played 4. TA from FM shall be displayed on the System screen 5. Currently playing iPod media shall mute and Traffic announcement shall be played. There shall not be any annoying sound parasite during the transition from iPod to TA 6. Traffic announcement shall be dismissed. iPod media shall unmute and restore playing. There shall not be any annoying sound parasite during the transition from TA to iPod Title: Dismissing Traffic announcement after accepting, during AM streaming Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM and FM Modulator (TRX) is connected to System 6. TA is enabled in radio settings 7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator) Steps: 1. Select AM source from the Band option 2. Select Browse option and select any station 3. Generate a Traffic announcement via TRX 4. Select "Continue" from the System screen 5. Dismiss the Traffic announcement Expected Result: 1. AM Landing screen shall be launched 2. Selected AM station shall be played 3. TA from FM shall be displayed on the System screen 4. Currently streaming AM station shall mute and Traffic announcement shall be played. There shall not be any annoying sound parasite during the transition from AM to TA 5. AM station shall unmute and restore streaming. There shall not be any annoying sound parasite during the transition from TA to AM Title: Dismissing Traffic announcement after accepting, during DAB streaming Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. DAB and FM Modulator (TRX) are connected to System 6. TA is enabled in radio settings 7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator) Steps: 1. Select DAB source from the Band option 2. Select Browse option and select any station 3. Generate a Traffic announcement via TRX 4. Select "Continue" from the System screen 5. Dismiss the Traffic announcement or Wait till Traffic announcement is over Expected Result: 1. DAB Landing screen shall be launched 2. Selected DAB station shall be played 3. TA from FM shall be displayed on the System screen 4. Currently streaming DAB station shall mute and Traffic announcement shall be played. There shall not be any annoying sound parasite during the transition from DAB to TA 5. DAB station shall unmute and restore streaming. There shall not be any annoying sound parasite during the transition from TA to DAB Title: Audio during commutation between PTY31 and FM station Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM Modulator (TRX) is connected to System 6. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator) Steps: 1. Generate a PTY31 via TRX 2. Select "Continue" from the System screen 3. Wait for PTY31 to end Expected Result: 1. PTY31 from FM shall be displayed on the System screen 2. Currently streaming FM station shall mute and PTY31 shall be played. There shall not be any annoying sound parasite during the transition from FM to PTY31 3. PTY31 shall be ended. FM station shall unmute and restore streaming. There shall not be any annoying sound parasite during the transition from PTY31 to FM Title: Audio during commutation between PTY31 and USB media Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM Modulator (TRX) is connected to System 6. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator) 7. USB device having valid audio files is connected to System Steps: 1. Press Media icon from left side of Radio screen 2. Launch USB source from MyDevice icon 3. Select List option and play a song from any library folder 4. Generate a PTY31 via TRX 5. Select "Continue" from the System screen 6. Wait for PTY31 to finish Expected Result: 1. Media screen shall be displayed 2. USB Media source shall be launched 3. Selected song shall be played 4. PTY31 from FM shall be displayed on the System screen 5. Currently playing USB media shall mute and PTY31 shall be played. There shall not be any annoying sound parasite during the transition from USB to PTY31 6. PTY31 shall be ended. USB media shall unmute and restore playing. There shall not be any annoying sound parasite during the transition from PTY31 to USB source Title: Audio during commutation between PTY31 and BT media Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM Modulator (TRX) is connected to System 6. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator) 7. BT device having valid audio files is connected to System Steps: 1. Press Media icon from left side of Radio screen 2. Launch BT source from MyDevice icon 3. Select List option and play a song from any library folder 4. Generate a PTY31 via TRX 5. Select "Continue" from the System screen 6. Wait for PTY31 to finish Expected Result: 1. Media screen shall be displayed 2. BT Media source shall be launched 3. Selected song shall be played 4. PTY31 from FM shall be displayed on the System screen 5. Currently playing BT media shall mute and PTY31 shall be played.There shall not be any annoying sound parasite during the transition from BT to PTY31 6. PTY31 shall be dismissed. BT media shall unmute and restore playing.There shall not be any annoying sound parasite during the transition from PTY31 to BT Title: Audio during commutation between PTY31 and iPod media Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM Modulator (TRX) is connected to System 6. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator) 7. iPod device having valid audio files is connected to System Steps: 1. Press Media icon from left side of Radio screen 2. Launch iPod source from MyDevice icon 3. Select List option and play a song from any library folder 4. Generate a PTY31 via TRX 5. Select "Continue" from the System screen 6. Wait for PTY31 to finish Expected Result: 1. Media screen shall be displayed 2. iPod Media source shall be launched 3. Selected song shall be played 4. PTY31 from FM shall be displayed on the System screen 5. Currently playing iPod media shall mute and PTY31 shall be played. There shall not be any annoying sound parasite during the transition from iPod to PTY31 6. PTY31 shall be dismissed. iPod media shall unmute and restore playing. There shall not be any annoying sound parasite during the transition from PTY31 to iPod Title: Audio during commutation between PTY31 and AM station Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM and FM Modulator (TRX) is connected to System 6. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator) Steps: 1. Select AM source from the Band option 2. Select Browse option and select any station 3. Generate a PTY31 via TRX 4. Select "Continue" from the System screen 5. Wait for PTY31 to finish Expected Result: 1. AM Landing screen shall be launched 2. Selected AM station shall be played 3. PTY31 from FM shall be displayed on the System screen 4. Currently streaming AM station shall mute and PTY31 shall be played. There shall not be any annoying sound parasite during the transition from AM to PTY31 5. AM station shall unmute and restore streaming. There shall not be any annoying sound parasite during the transition from PTY31 to AM Title: Audio during commutation between PTY31 and DAB station Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. DAB and FM Modulator (TRX) are connected to System 6. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator) Steps: 1. Select DAB source from the Band option 2. Select Browse option and select any station 3. Generate a PTY31 via TRX 4. Select "Continue" from the System screen 5. Wait for PTY31 to finish Expected Result: 1. DAB Landing screen shall be launched 2. Selected DAB station shall be played 3. PTY31 from FM shall be displayed on the System screen 4. Currently streaming DAB station shall mute and PTY31 shall be played. There shall not be any annoying sound parasite during the transition from DAB to PTY31 5. DAB station shall unmute and restore streaming. There shall not be any annoying sound parasite during the transition from PTY31 to DAB

During ongoing seeking / RDS info shall not be visible until tuner tunes to a valid station.

Title: FM RDS info not displayed during auto seek up Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Select a station from the list 3. Press Auto Seek_Next arrow from FM landing screen Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. Auto seek up shall start and next FM station with an increased step frequency shall be seeked. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking. RDS (Station name and Radio text) info shall not be displayed until a valid station is seeked Title: FM RDS info not displayed during auto seek down Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Select a station from the list 3. Press Auto Seek_Previous arrow from FM landing screen Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. Auto seek down shall start and previous FM station with a decreased step frequency shall be seeked. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking. RDS info shall not be displayed until a valid station is seeked

During ongoing seeking, RDS info shall not be visible until tuner tunes to a valid station.

Title: Station information for a valid FM station after manual seek up Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress Steps: 1. Short press Seek_Next arrow from FM landing screen 2. Continue to press Seek_Next arrow until a valid frequency is reached Expected Result: 1. Next FM station with a step frequency increased by 0.05MHz shall be tuned/seeked. Station information and Radio Text will not be displayed during tuning 2. Station information and Radio Text shall be displayed without any delay when valid station is tuned Title: Station information for a valid FM station after manual seek down Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress Steps: 1. Short press Seek_Previous arrow from FM landing screen 2. Continue to press Seek_Previous arrow until a valid frequency is reached Expected Result: 1. Previous FM station with a step frequency decreased by 0.05MHz shall be tuned/seeked. Station information and Radio Text will not be displayed during tuning 2. Station information and Radio Text shall be displayed without any delay when valid station is tuned Title: FM RDS info not displayed during manual seek up Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Select a station from the list 3. Short press Seek_Next arrow from FM landing screen Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. Next FM station with an increased step frequency shall be seeked and RDS info (Station name and Radio text) shall not be displayed if seeked frequency is not a valid station Title: FM RDS info not displayed during manual seek down Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Select a station from the list 3. Short press Seek_Previous arrow from FM landing screen Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. Previous FM station with a decreased step frequency shall be seeked and RDS (Station name and Radio text) info shall not be displayed if seeked frequency is not a valid station

During seek / if tuner is not able to find the next/previous valid station after traversing the entire band once / it shall stop seek at the last tuned station / where seek was initiated.

Title: Auto seek up operation when no other valid AM stations are found Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress 6. Attenuator is plugged to System Steps: 1. Press Auto Seek_Next arrow from AM landing screen 2. Increase the Attenuator value to decrease signal quality and wait until Auto seek up operation is completed Expected Result: 1. Auto seek up operation shall start 2. Auto seek up operation is completed and last tuned AM station, where seek was initiated, shall be streamed Title: Auto seek down operation when no other valid AM stations are found Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress 6. Attenuator is plugged to System Steps: 1. Press Auto Seek_Previous arrow from AM landing screen 2. Increase the Attenuator value to decrease signal quality and wait until Auto seek down operation is completed Expected Result: 1. Auto seek down operation shall start 2. Auto seek down operation is completed and last tuned AM station, where seek was initiated, shall be streamed Title: Auto seek up operation when no other valid FM stations are found Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress Steps: 1. Press Auto Seek_Next arrow from FM landing screen 2. Wait until Auto seek up operation is completed Expected Result: 1. Auto seek up operation shall start 2. Auto seek up operation is completed and last tuned FM station, where seek was initiated, shall be streamed Title: Auto seek down operation when no other valid FM stations are found Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress Steps: 1. Press Auto Seek_Previous arrow from FM landing screen 2. Wait until Auto seek down operation is completed Expected Result: 1. Auto seek down operation shall start 2. Auto seek down operation is completed and last tuned FM station, where seek was initiated, shall be streamed

During seek down, the system shall tune to:  the previous valid station of the current multiplex if any,  else to last valid station of the previous multiplex if any,  else wrap around to the last valid station of the last multiplex of the band.

Title: Previous Valid DAB station is played after performing Seek Down Preconditions: - System is up and running (ACC ON->IGN ON). - DAB antenna is plugged to tuner. - DAB landing screen is active. - DAB is tuned to 5B 174.928 MHz and have strong signal strength. Steps: 1. Short press on previous seek arrow to perform Seek down. Expected Result: 1. Previous valid DAB station shall be played.

During seek up, the system shall tune to:  the next valid station of the current multiplex if any,  else to first valid station of the next multiplex if any,  else wrap around to the first valid station of the first multiplex of the band

Title: Tune next station from current multiplex during seek next Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. DAB landing screen is active Steps: 1. Select Browse option from DAB Landing screen 2. Select any station (Not the first/last station) of a multiplex 3. Short press Seek_Next arrow from DAB landing screen Expected Result: 1. DAB station list shall be displayed 2. Selected DAB station shall be played 3. Next station of the current multiplex shall be tuned. Current station number and total number of stations in current multiplex shall be displayed on the screen. Title: Tune first station of next available multiplex during seek next Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. DAB Modulator 1 is available and connected to the system 5. DAB Modulator 2 is available and connected to the system 6. DAB landing screen is active Steps: 1. Select Browse option from DAB Landing screen 2. Select last station of first multiplex (Multiplex with lower frequency) 3. Short press Seek_Next arrow from DAB landing screen Expected Result: 1. DAB station list shall be displayed 2. Selected DAB station shall be played 3. First station of the next available multiplex (Multiplex with next higher frequency) shall be tuned. Current station number and total number of stations in current multiplex shall be displayed on the screen. Title: Tune first station of first multiplex during seek next Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. DAB Modulator 1 is available and connected to the system 5. DAB Modulator-2 is available and connected to the system 6. DAB landing screen is active Steps: 1. Select Browse option from DAB Landing screen 2. Select last station of last multiplex (Multiplex having the highest frequency) 3. Short press Seek_Next arrow from DAB landing screen Expected Result: 1. DAB station list shall be displayed 2. Selected DAB station shall be played 3. First station of the first multiplex (Multiplex having the lowest frequency) shall be tuned. Current station number and total number of stations in current multiplex shall be displayed on the screen.

During seek, if the system is not able to find the next/previous valid station after traversing the entire band once, it shall stop seek at the last tuned multiplex and tune to the station where seek was initiated.

Title: Last tuned DAB station is played when no valid stations found during Auto seek up. Preconditions: - System is up and running (ACC ON->IGN ON). - DAB antenna is plugged to tuner. - DAB landing screen is active and valid 5B 176.640 MHz DAB station is playing. Steps: 1. Unplug antenna from Tuner. 2. Long press on next seek arrow to perform Auto seek up. 3. Wait until Auto seek up operation is completed. Expected Result: 1. The audio shall be lost. 2. Auto seek up shall be started. 3. Last tuned station(5B 176.640 MHz) shall be played when no valid stations found during Auto seek up operation. Title: Last tuned DAB station is played when no valid stations found during Auto seek down. Preconditions: - System is up and running (ACC ON->IGN ON). - DAB antenna is plugged to tuner. - DAB landing screen is active and valid 5B 176.640 MHz DAB station is playing. Steps: 1. Unplug antenna from Tuner. 2. Long press on previous seek arrow to perform Auto seek down. 3. Wait until Auto seek down operation is completed. Expected Result: 1. The audio shall be lost. 2. Auto seek down shall be started. 3. Last tuned station(5B 176.640 MHz) shall be played when no valid stations found during Auto seek down operation.

During seek, the system shall mute the audio until the next valid station is locked in.

Title: For DAB audio is muted until next frequency is locked in after manual seek up Preconditions: - System is up and running (ACC ON->IGN ON). - DAB antenna is plugged to tuner. - DAB landing screen is active and valid DAB station is playing. Steps: 1. Short press on next seek arrow to perform manual seek up. 2. Wait till next valid station is tuned. Expected Result: 1. Seeking process should be started 2. New available station should be played Title: For DAB audio is muted until previous frequency is locked in after manual seek down Preconditions: - System is up and running (ACC ON->IGN ON). - DAB antenna is plugged to tuner. - DAB landing screen is active and valid DAB station is playing. Steps: 1. Short press on previous seek arrow to perform manual seek down. 2. Wait till next valid station is tuned. Expected Result: 1. Seeking process should be started 2. New available station should be played

During seeking / If user presses seek button in opposite direction / then the product shall cancel seeking and accept user operation.

Title: AM - Autoseek cancelled when seek down button is pressed Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress Steps: 1. Press Auto Seek_Previous arrow from AM landing screen 2. Press manual Seek_Previous arrow from AM landing screen during auto seek Expected Result: 1. Auto seek down operation is started. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking 2. Auto seek down operation shall be aborted and tuned to last frequency where seek is aborted Title: FM - Autoseek cancelled when seek down button is pressed Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress Steps: 1. Press Auto Seek_Previous arrow from FM landing screen 2. Press manual Seek_Next arrow from FM landing screen during auto seek Expected Result: 1. Auto seek down operation is started. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking 2. Auto seek down operation shall be aborted and tuned to last frequency where seek is aborted

During seeking / If user presses seek button in the same direction / then the product shall cancel seeking and accept user operation.

Title: For AM band Seek operation is cancelled when seek up button is pressed Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress Steps: 1. Press Auto Seek_Next arrow from AM landing screen 2. Press manual Seek_Next arrow from AM landing screen during auto seek Expected Result: 1. Auto seek up operation is started. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking 2. Auto seek up operation shall be aborted and tuned to last frequency where seek is aborted Title: FM - Autoseek cancelled when seek up button is pressed Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress Steps: 1. Press Auto Seek_Next arrow from FM landing screen 2. Press manual Seek_Next arrow from FM landing screen during auto seek Expected Result: 1. Auto seek up operation is started. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking 2. Auto seek up operation shall be aborted and tuned to last frequency where seek is aborted

During seeking, if user does operation that affect Radio Tuner control (Single tune up/down, seek up/down, Update station list, preset call, band change), then the product shall cancel seeking and accept user operation.

Title: For AM band Seek operation is cancelled when seek up button is pressed Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress Steps: 1. Press Auto Seek_Next arrow from AM landing screen 2. Press manual Seek_Next arrow from AM landing screen during auto seek Expected Result: 1. Auto seek up operation is started. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking 2. Auto seek up operation shall be aborted and tuned to last frequency where seek is aborted Title: AM - Autoseek cancelled when seek down button is pressed Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress Steps: 1. Press Auto Seek_Previous arrow from AM landing screen 2. Press manual Seek_Previous arrow from AM landing screen during auto seek Expected Result: 1. Auto seek down operation is started. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking 2. Auto seek down operation shall be aborted and tuned to last frequency where seek is aborted Title: AM - Autoseek down cancelled when Band selection button is pressed Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress Steps: 1. Press Auto Seek_Previous arrow from AM landing screen 2. Press Band option from AM landing screen during auto seek Expected Result: 1. Auto seek down operation is started. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking 2. Auto seek down operation shall be aborted and tuned to last frequency where seek is aborted Title: AM - Autoseek up cancelled when Browse button is pressed Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress Steps: 1. Press Auto Seek_Next arrow from AM landing screen 2. Press Browse option from AM landing screen during auto seek Expected Result: 1. Auto seek up is started. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking 2. Auto seek up operation shall be aborted and tuned to last frequency where seek is aborted Title: AM - Autoseek down cancelled when Preset button is pressed Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress Steps: 1. Press Auto Seek_Previous arrow from AM landing screen 2. Press a Preset from AM landing screen during auto seek Expected Result: 1. Auto seek down is started. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking 2. Auto seek down operation shall be aborted and tuned to last frequency where seek is aborted Title: AM - Autoseek up cancelled when Band selection button is pressed Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress Steps: 1. Press Auto Seek_Next arrow from AM landing screen 2. Press Band option from AM landing screen during auto seek Expected Result: 1. Auto seek up operation is started. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking 2. Auto seek up operation shall be aborted and tuned to last frequency where seek is aborted Title: AM - Autoseek down cancelled when Browse button is pressed Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress Steps: 1. Press Auto Seek_Previous arrow from AM landing screen 2. Press Browse option from AM landing screen during auto seek Expected Result: 1. Auto seek down is started. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking 2. Auto seek down operation shall be aborted and tuned to last frequency where seek is aborted Title: AM - Autoseek up cancelled when Preset button is pressed Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress Steps: 1. Press Auto Seek_Next arrow from AM landing screen 2. Press a Preset from AM landing screen during auto seek Expected Result: 1. Auto seek up is started. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking 2. Auto seek up operation shall be aborted and tuned to last frequency where seek is aborted Title: FM - Autoseek cancelled when seek up button is pressed Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress Steps: 1. Press Auto Seek_Next arrow from FM landing screen 2. Press manual Seek_Next arrow from FM landing screen during auto seek Expected Result: 1. Auto seek up operation is started. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking 2. Auto seek up operation shall be aborted and tuned to last frequency where seek is aborted Title: FM - Autoseek cancelled when seek down button is pressed Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress Steps: 1. Press Auto Seek_Previous arrow from FM landing screen 2. Press manual Seek_Next arrow from FM landing screen during auto seek Expected Result: 1. Auto seek down operation is started. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking 2. Auto seek down operation shall be aborted and tuned to last frequency where seek is aborted Title: FM - Autoseek down cancelled when Band selection button is pressed Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress Steps: 1. Press Auto Seek_Previous arrow from FM landing screen 2. Press Band option from FM landing screen during auto seek Expected Result: 1. Auto seek down operation is started. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking 2. Auto seek down operation shall be aborted and tuned to last frequency where seek is aborted Title: FM - Autoseek up cancelled when Browse button is pressed Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress Steps: 1. Press Auto Seek_Next arrow from FM landing screen 2. Press Browse -->Refresh --> Cancel --> Back button from FM screen. Expected Result: 1. Auto seek up is started. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking 2. Auto seek up operation shall be aborted and tuned to last frequency where seek is aborted Title: FM - Autoseek down cancelled when Preset button is pressed Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress 6. Few Presets are stored. Steps: 1. Press Auto Seek_Previous arrow from FM landing screen 2. Press a stored Preset from FM landing screen during auto seek Expected Result: 1. Auto seek down is started. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking 2. Auto seek down operation shall be aborted and selected preset should start playing. Title: FM - Autoseek up cancelled when Band selection button is pressed Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress Steps: 1. Press Auto Seek_Next arrow from FM landing screen 2. Press Band option from FM landing screen during auto seek Expected Result: 1. Auto seek up operation is started. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking 2. Auto seek up operation shall be aborted and tuned to last frequency where seek is aborted Title: FM - Autoseek down cancelled when Browse button is pressed Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress Steps: 1. Press Auto Seek_Previous arrow from FM landing screen 2. Press Browse -->Refresh --> Cancel --> Back button from FM screen. Expected Result: 1. Auto seek down is started. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking 2. Auto seek down operation shall be aborted and tuned to last frequency where seek is aborted Title: FM - Autoseek up cancelled when Preset button is pressed Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress 6. Few presets are stored. Steps: 1. Press Auto Seek_Next arrow from FM landing screen 2. Press any stored Preset from FM landing screen during auto seek Expected Result: 1. Auto seek up is started. Station name is replaced by “Seeking...” and station frequency shall be changed continuously according to station seeking 2. Auto seek up operation shall be aborted and selected preset should start playing

During startup / the system shall start tuner audio in 30 seconds.

Title: AM Tuner audio during System startup Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and streaming is in progress Steps: 1. Perform Sleep cycle and observe for AM audio Expected Result: 1. System should be up and AM station should start playing within 30 seconds Title: FM Tuner audio during System startup Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and streaming is in progress Steps: 1. Perform Sleep cycle and observe for FM audio Expected Result: 1. System should be up and FM station should start playing within 30 seconds

During the diffusion of an announcement (TA or PTY31), System shall be able to manage the follow-up of the listened program in order to detect any change on it and to restore it at the end of the announcement as it would have done if no announcement had been played.

Title: FM radio mute during Traffic announcement Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM Modulator (TRX) is connected to System 6. TA is enabled in radio settings 7. FM landing screen is active and a FM station is streaming (Station not from connected TRX. Use either Live or other modulator) Steps: 1. Generate a Traffic announcement via FM modulator 2. Select "Continue" from the System screen 3. Dismiss the Traffic announcement or Wait till Traffic announcement is over Expected Result: 1. Traffic announcement from FM shall be displayed on the System screen 2. Currently streaming FM station shall mute and Traffic announcement shall be played 3. FM station shall unmute and restore streaming Title: FM radio mute during PTY31 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM Modulator (TRX) is connected to System 6. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator) Steps: 1. Generate a PTY31 via FM modulator 2. Select "Continue" from the System screen 3. Wait till PTY31 is over Expected Result: 1. PTY31 from FM shall be displayed on the System screen 2. Currently streaming FM station shall mute and PTY31 shall be played 3. FM station shall unmute and restore streaming Title: AM radio mute during Traffic announcement Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM and FM Modulator (TRX) is connected to System 6. TA is enabled in radio settings 7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator) Steps: 1. Select AM source from the Band option 2. Select Browse option and select any station 3. Generate a Traffic announcement via TRX 4. Select "Continue" from the System screen 5. Dismiss the Traffic announcement or Wait till Traffic announcement is over Expected Result: 1. AM Landing screen shall be launched 2. Selected AM station shall be played 3. TA from FM shall be displayed on the System screen 4. Currently streaming AM station shall mute and Traffic announcement shall be played 5. AM station shall unmute and restore streaming Title: AM radio mute during PTY31 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM and FM Modulator (TRX) is connected to System 6. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator) Steps: 1. Select AM source from the Band option 2. Select Browse option and select any station 3. Generate a PTY31 via TRX hardware 4. Select "Continue" from the System screen 5. Wait till PTY31 is over Expected Result: 1. AM Landing screen shall be launched 2. Selected AM station shall be played 3. PTY31 from FM shall be displayed on the System screen 4. Currently streaming AM station shall mute and PTY31 shall be played 2. AM station shall unmute and restore streaming Title: USB audio mute during Traffic announcement Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM Modulator (TRX) is connected to System 6. TA is enabled in Radio settings 7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator) 8. USB device having valid audio files is connected to System Steps: 1. Press Media icon from left side of Radio screen 2. Launch USB source from MyDevice icon 3. Select List option and play a song from any library folder 4. Generate a Traffic announcement via TRX 5. Select "Continue" from the System screen 6. Dismiss the Traffic announcement or Wait till Traffic announcement is over Expected Result: 1. Media screen shall be displayed 2. USB Media source shall be launched 3. Selected song shall be played 4. TA from FM shall be displayed on the System screen 5. Currently playing USB media shall mute and Traffic announcement shall be played 5. USB media shall unmute and restore playing once TA is completed Title: USB audio mute during PTY31 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM Modulator (TRX) is connected to System 6. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator) 7. USB device having valid audio files is connected to System Steps: 1. Press Media icon from left side of Radio screen 2. Launch USB source from MyDevice icon 3. Select List option and play a song from any library folder 4. Generate a PTY31 via TRX 5. Select "Continue" from the System screen 6. Wait till PTY31 is over Expected Result: 1. Media screen shall be displayed 2. USB Media source shall be launched 3. Selected song shall be played 4. PTY31 from FM shall be displayed on the System screen 5. Currently playing USB media shall mute and PTY31 shall be played 6. USB media shall unmute and restore playing once PTY31 is completed Title: BT audio mute during Traffic announcement Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM Modulator (TRX) is connected to System 6. TA is enabled in Radio settings 7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator) 8. BT device having valid audio files is connected to System Steps: 1. Press Media icon from left side of Radio screen 2. Launch BT source from MyDevice icon 3. Select List option and play a song from any library folder 4. Generate a Traffic announcement via TRX 5. Select "Continue" from the System screen 6. Dismiss the Traffic announcement or Wait till Traffic announcement is over Expected Result: 1. Media screen shall be displayed 2. BT Media source shall be launched 3. Selected song shall be played 4. TA from FM shall be displayed on the System screen 5. Currently playing BT media shall mute and Traffic announcement shall be played 6. BT media shall unmute and restore playing once TA is completed Title: BT audio mute during PTY31 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM Modulator (TRX) is connected to System 6. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator) 7. BT device having valid audio files is connected to System Steps: 1. Press Media icon from left side of Radio screen 2. Launch BT source from MyDevice icon 3. Select List option and play a song from any library folder 4. Generate a PTY31 via TRX 5. Select "Continue" from the System screen 6. Wait till PTY31 is over Expected Result: 1. Media screen shall be displayed 2. BT Media source shall be launched 3. Selected song shall be played 4. PTY31 from FM shall be displayed on the System screen 5. Currently playing BT media shall mute and PTY31 shall be played 6. BT media shall unmute and restore playing once TA is completed Title: iPod audio mute during Traffic announcement Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM Modulator (TRX) is connected to System 6. TA is enabled in radio settings 7. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator) 8. iPod device having valid audio files is connected to System Steps: 1. Press Media icon from left side of Radio screen 2. Launch iPod source from MyDevice icon 3. Select List option and play a song from any library folder 4. Generate a Traffic announcement via TRX 5. Select "Continue" from the System screen 6. Dismiss the Traffic announcement or Wait till Traffic announcement is over Expected Result: 1. Media screen shall be displayed 2. iPod Media source shall be launched 3. Selected song shall be played 4. TA from FM shall be displayed on the System screen 5. Currently playing iPod media shall mute and Traffic announcement shall be played 6. iPod media shall unmute and restore playing once TA is completed Title: iPod audio mute during PTY31 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM Modulator (TRX) is connected to System 6. FM landing screen is active and a FM station is streaming. (Station not from the connected TRX. Use either Live or other modulator) 7. iPod device having valid audio files is connected to System Steps: 1. Press Media icon from left side of Radio screen 2. Launch iPod source from MyDevice icon 3. Select List option and play a song from any library folder 4. Generate a PTY31 via TRX 5. Select "Continue" from the System screen 6. Wait till PTY31 is over Expected Result: 1. Media screen shall be displayed 2. iPod Media source shall be launched 3. Selected song shall be played 4. PTY31 from FM shall be displayed on the System screen 5. Currently playing iPod media shall mute and PTY31 shall be played 5. iPod media shall unmute and restore playing once PTY31 is completed Title: DAB radio mute during Traffic announcement Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. DAB and FM Modulator (TRX) is connected to System 6. TA is enabled in radio settings 7. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator) Steps: 1. Select DAB source from the Band option 2. Select Browse option and select any station 3. Generate a Traffic announcement via TRX 4. Select "Continue" from the System screen 5. Dismiss the Traffic announcement or Wait till Traffic announcement is over Expected Result: 1. DAB Landing screen shall be launched 2. Selected DAB station shall be played 3. TA from FM shall be displayed on the System screen 4. Currently streaming DAB station shall mute and Traffic announcement shall be played 5. DAB station shall unmute and restore streaming Title: DAB radio mute during PTY31 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. DAB and FM Modulator (TRX) is connected to System 6. FM landing screen is active and a FM station is streaming (Station not from the connected TRX. Use either Live or other modulator) Steps: 1. Select DAB source from the Band option 2. Select Browse option and select any station 3. Generate a PTY31 via TRX hardware 4. Select "Continue" from the System screen 5. Wait till PTY31 is over Expected Result: 1. DAB Landing screen shall be launched 2. Selected DAB station shall be played 3. PTY31 from DAB shall be displayed on the System screen 4. Currently streaming DAB station shall mute and PTY31 shall be played 5. DAB station shall unmute and restore streaming

During the manual station list generation, other tuner functionalities (search, seek, band selection, preset record) will be blocked.

Title: Seek functionality during station list generation for AM Band Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Press Refresh option available in AM station list 3. Tap anywhere in Station list updating popup, other than Cancel button Expected Result: 1. AM station list shall be displayed 2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram 3. Station list generation is not interrupted and popup is not dismissed. Seek functionality shall not be available during station list generation Title: Band selection functionality during station list generation for AM Band Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Press Refresh option available in AM station list 3. Tap anywhere in Station list updating popup, other than Cancel button Expected Result: 1. AM station list shall be displayed 2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram 3. Station list generation is not interrupted and popup is not dismissed. Band selection functionality shall not be available during station list generation Title: Preset record functionality during station list generation for AM Band Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Press Refresh option available in AM station list 3. Tap anywhere in Station list updating popup, other than Cancel button Expected Result: 1. AM station list shall be displayed 2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram 3. Station list generation is not interrupted and popup is not dismissed. Preset record functionality shall not be available during station list generation Title: Seek functionality during station list generation for FM Band Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Press Refresh option available in FM station list 3. Tap anywhere in Station list updating popup, other than Cancel button Expected Result: 1. FM station list shall be displayed 2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram 3. Station list generation is not interrupted and popup is not dismissed. Seek functionality shall not be available during station list generation Title: Band selection functionality during station list generation for FM Band Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Press Refresh option available in FM station list 3. Tap anywhere in Station list updating popup, other than Cancel button Expected Result: 1. FM station list shall be displayed 2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram 3. Station list generation is not interrupted and popup is not dismissed. Band selection functionality shall not be available during station list generation Title: Preset record functionality during station list generation for FM Band Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Press Refresh option available in FM station list 3. Tap anywhere in Station list updating popup, other than Cancel button Expected Result: 1. FM station list shall be displayed 2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram 3. Station list generation is not interrupted and popup is not dismissed. Preset record functionality shall not be available during station list generation

Each station list shall support maximum  (NbMaxStationsInStationList) stations. Note: Refer table 4 for values !table4T.PNG|thumbnail!

Title: AM Station list - Maximum Stations Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active 6. More than 100 AM stations are available in AM streaming file Steps: 1. Select Browse option from AM landing screen 2. Scroll down AM station list Expected Result: 1. AM station list shall be displayed 2. AM station list shall be listed with maximum 100 stations Title: Maximum number of stations displayed in FM station list. Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active 6. More than 150 FM stations are available in FM streaming file Steps: 1. Select Browse option from FM landing screen 2. Scroll down FM station list Expected Result: 1. FM station list shall be displayed 2. FM station list shall be listed with maximum 150 stations

Every graphical assets used to draw/animate Radio HMI shall be those provided by STLA for all Brands and Carlines. See: \\frpfanas1711.pfa.fr.corp\DOCS\AUTO\PROJECTS\INFO\NIS\PSA_IVI_Smart_Car_2\08 - Software\08-01 - Customer Inputs\08-01-01 - HMI

Title: Verify Element of "RD001_Radio_FM_Landing_Screen" Preconditions: 1.Vehicle Vbat is On 2.Ign is On 3. FM is active 4. "Home Screen" is active Steps: 1. Click on Radio Icon from Control bar Expected Result: 1. "RD001_Radio_FM_Landing_Screen" should be displayed and below element should be matched with FIGMA: 1. Volume bar 2. Control bar 3. Switch media 4. Band Selection 5. Browse 6. Setting 7. FM image 8. Current Station Frequency & Unit 9. Seek up and Seek down 10. Next and Previous 11. Station name 12. Radio Text 13. Station information Title: Verify Element of "RD004_Radio_Preset_List" screen Preconditions: 1.Vehicle Vbat is On 2.Ign is On 3. FM is active 4. System is in "RD001_Radio_FM_Landing_Screen" Steps: 1. Click on next Expected Result: 1. "RD004_Radio_Preset_List" screen should be displayed and below element should matched with FIGMA: 1. Volume bar 2. Control bar 3. Switch media 4. Band Selection 5. Browse 6. Setting 7. FM icon 8. Station name 9. Current station frequency and unit 11. Seek up and Seek down 12. Radio text 13. Next and previous 14. Station list Title: Verify Element of "RD005_Radio_Band_Selection_Screen" Preconditions: 1.Vehicle Vbat is On 2.Ign is On 3. FM is active 4. System is in "RD001_Radio_FM_Landing_Screen" Steps: 1. Click on Band selection option Expected Result: 1. "RD005_Radio_Band_Selection_Screen" should be displayed and below element should be matched with FIGMA: 1. Volume bar 2. Control bar 3. Switch media 4. Band Selection 5. Browse 6. Setting 7. Station name 8. Current Station Frequency & Unit 9. Seek up and Seek down 10. Next and Previous 11. Pictogram 12. AM radio, FM radio and DAB radio 13. Station information Title: Verify Element of "RD002_Radio_AM_Landing_Screen" Preconditions: 1.Vehicle Vbat is On 2.Ign is On 3. FM is active 4. System is in "RD005_Radio_Band_Selection_Screen" Steps: 1. Click on AM Expected Result: 1. "RD002_Radio_AM_Landing_Screen" should be displayed and below element should be matched with FIGMA: 1. Volume bar 2. Control bar 3. Switch media 4. Band Selection 5. Browse 6. Setting 7. Current Station Frequency & Unit 8. AM image 9. Seek up and Seek down 10. Next and Previous 11. Station information Title: Verify Element of "RD007_Radio_AM_Station_List" screen Preconditions: 1.Vehicle Vbat is On 2.Ign is On 3. System is in "RD002_Radio_AM_Landing_Screen" Steps: 1. Click on browse option Expected Result: 1. "RD007_Radio_AM_Station_List" screen should be displayed and below element should be matched with FIGMA: 1. Volume bar 2. Control bar 3. Refresh 4. Scroll bar 5. Frequency and present number 6. AM station list 7. Back Title: Verify Element of "RD010_Radio_Station_List_Updating_Popup" screen for AM Preconditions: 1.Vehicle Vbat is On 2.Ign is On 3. "RD002_Radio_AM_Landing_Screen" Steps: 1. Click on browse option 2. Click on Refresh option Expected Result: 1. "RD007_Radio_AM_Station_List" screen should be displayed 2. "RD010_Radio_Station_List_Updating_Popup" screen should be displayed and below element should be matched with FIGMA: 1. Volume bar 2. Control bar 3. Refresh 4. Cancel 5. Radio 6. Station List Updating.. 7. Update icon Title: Verify Element of "RD008_Radio_FM_Station_List" screen Preconditions: 1.Vehicle Vbat is On 2.Ign is On 3. System is in "RD001_Radio_FM_Landing_Screen" Steps: 1. Click on browse option Expected Result: 1. "RD008_Radio_FM_Station_List" screen should be displayed and below element should be matched with FIGMA: 1. Volume bar 2. Control bar 3. Scroll bar 4. Back 5. Refresh 6. Station name and Frequency 7. FM station list Title: Verify Element of "RD010_Radio_Station_List_Updating_Popup" screen for FM Preconditions: 1.Vehicle Vbat is On 2.Ign is On 3. System is in "RD008_Radio_FM_Station_List" Steps: 1. Click on Refresh option Expected Result: 1. "RD010_Radio_Station_List_Updating_Popup" screen should be displayed and below element should be matched with FIGMA: 1. Volume bar 2. Control bar 3. Cancel 4. Radio 5. Station List Updating.. 6. Update icon Title: Verify Element of "RD011_Radio_Preset_Failure_Popup" screen Preconditions: 1.Vehicle Vbat is On 2.Ign is On 3. System is in "RD008_Radio_FM_Station_List" Steps: 1. Long press on any station from station list Expected Result: 1. "RD011_Radio_Preset_Failure_Popup" screen should be displayed and below element should be matched with FIGMA: 1. Control bar 2. Volume bar 3. "Station cannot be stored as a preset. Delete a preset station before storing a new one" message Title: Verify Element of "RD003_Radio_DAB_Landing_Screen" Preconditions: 1.Vehicle Vbat is On 2.Ign is On 3. FM screen is active 4. System is in "RD005_Radio_Band_Selection_Screen" Steps: 1. Click on DAB Radio option Expected Result: 1. "RD003_Radio_DAB_Landing_Screen" should be displayed and below element should be matched with FIGMA: 1. Volume bar 2. Control bar 3. Switch media 4. Band Selection 5. Browse 6. Settings 7. Station logo 8. Station name (16 Char max) 9. Radio Text (on 2 lines 128 char max) 10. Multiplex 11. FM handover 12. Next and Previous buttons 13. Preset list Title: Verify Element of "RD009_Radio_DAB_Station_List" screen Preconditions: 1.Vehicle Vbat is On 2.Ign is On 3. System is in "RD003_Radio_DAB_Landing_Screen" Steps: 1. Click on browse option Expected Result: 1. "RD009_Radio_DAB_Station_List" screen should be displayed and below element should be matched with FIGMA: 1. Volume bar 2. Control bar 3. Refresh 4. Back 5. Scroll bar 6. Station logo with details 6. DAB station list Title: Verify Element of "RD010_Radio_Station_List_Updating_Popup" screen for DAB Preconditions: 1.Vehicle Vbat is On 2.Ign is On 3. System is in "RD009_Radio_DAB_Station_List" Steps: 1. Click on Refresh option Expected Result: 1. "RD010_Radio_Station_List_Updating_Popup" screen should be displayed and below element should be matched with FIGMA: 1. Volume bar 2. Control bar 3. Refresh 4. Cancel 5. Radio 6. Station List Updating.. 7. Update icon Title: Verify Element of "RD012_Radio_Service_Announcement_Popup" screen Preconditions: 1.Vehicle Vbat is On 2.Ign is On 3. System is in "RD003_Radio_DAB_Landing_Screen" Steps: 1. Start DAB service announcement Expected Result: 1. "RD012_Radio_Service_Announcement_Popup" screen should be displayed and below element should be matched with FIGMA: 1. Volume bar 2. Control bar 3. Dismiss 4. Continue 5. Radio Service Announcement in Progress… Title: Verify Element of "RD014_Radio_Service_Announcement_StatusBar" screen Preconditions: 1.Vehicle Vbat is On 2.Ign is On 3. System is in "RD003_Radio_DAB_Landing_Screen" Steps: 1. Start DAB service announcement 2. Click on Continue Expected Result: 1. "RD012_Radio_Service_Announcement_Popup" screen should be displayed 2. "RD014_Radio_Service_Announcement_StatusBar" screen should be displayed and below element should be matched with FIGMA: 1. Volume bar 2. Control bar 3. Service announcement 4. Time Title: Verify Element of "RD014_Radio_Service_Announcement_StatusBar" screen Preconditions: 1.Vehicle Vbat is On 2.Ign is On 3. System is in "RD003_Radio_DAB_Landing_Screen" Steps: 1. Start DAB service announcement 2. Wait for timeout Expected Result: 1. "RD012_Radio_Service_Announcement_Popup" screen should be displayed 2. "RD014_Radio_Service_Announcement_StatusBar" screen should be displayed and below element should be matched with FIGMA: 1. Volume bar 2. Control bar 3. Service announcement 4. Time Title: Verify Element of "RD015_Radio_Service_Announcement_Screen" Preconditions: 1. Vehicle Vbat is ON 2. Ign is ON 3. DekTec is conected with system and DAB radio is active. 4. "Home Screen" is active Steps: 1. Start DAB service announcement 2. Click on Continue 3. Click on Radio icon from control bar Expected Result: 3. "RD015_Radio_Service_Announcement_Screen" should be displayed and below element should matched with FIGMA: 1. Volume bar 2. Control bar 3. Dismiss 4. Time Title: Verify Element of "RD013_Radio_Main_StatusBar" screen Preconditions: 1.Vehicle Vbat is On 2.Ign is On 3. Radio application is not display 4. System is in "RD001_Radio_FM_Landing_Screen" Steps: 1. Observe "RD013_Radio_Main_StatusBar" screen Expected Result: 1. Below element should be matched with FIGMA: 1. Volume bar 2. Control bar 3. Station name on status bar 4. Time Title: Verify Element of "RD006_Radio_Settings_List" screen Preconditions: 1.Vehicle Vbat is On 2.Ign is On 3. FM is active 4. DAB is available 5. System is in "RD001_Radio_FM_Landing_Screen" Steps: 1. Click on Setting Expected Result: 1."RD006_Radio_Settings_List" screen should displayed and below element should matched with FIGMA: 1. Volume bar 2. Control bar 3. Audio Settings 4. Cross icon 5. Radio settings 6. Balance/Fader 7. Equalizer 8. Volume 9. Sort FM list by station name with Toggle button 10. Radio text(RT) with Toggle button 11. Alternative Frequency (AF) with Toggle button 12. DAB to FM handover with Toggle button 13. Regional Mode (REG) with Toggle button 14. DAB Service Announcements with Toggle button 15. FM Traffic Announcement (TA) with Toggle button Title: Verify Element of "RD016_Radio_DAB_Station_List_Empty" screen Preconditions: 1.Vehicle Vbat is On 2.Ign is On 3. System is in "RD003_Radio_DAB_Landing_Screen" 4. DAB station list is empty Steps: 1. Click on browse option Expected Result: 1. "RD016_Radio_DAB_Station_List_Empty" screen should be displayed and below element should be matched with FIGMA: 1. Volume bar 2. Control bar 3. Refresh 4. No station found text 5. Back button Title: Verify Element of "RD017_Radio_AM_Station_List_Empty" screen Preconditions: 1.Vehicle Vbat is On 2.Ign is On 3. System is in "RD002_Radio_AM_Landing_Screen" 4. AM station list is empty Steps: 1. Click on browse option Expected Result: 1. "RD017_Radio_AM_Station_List_Empty" screen should be displayed and below element should be matched with FIGMA: 1. Volume bar 2. Control bar 3. Refresh 4. No station found text 5. Back Title: Verify Element of "RD018_Radio_FM_Station_List_Empty" screen Preconditions: 1. Vehicle Vbat is On 2. Ign is On 3. System is in "RD001_Radio_FM_Landing_Screen" 4. FM station list is empty Steps: 1. Click on browse option Expected Result: 1. "RD018_Radio_FM_Station_List_Empty" screen should be displayed and below element should be matched with FIGMA: 1. Volume bar 2. Control bar 3. Refresh 4. No station found text 5. Back

For AM / Tuner shall store the preset station information - frequency.

Title: Preset Information for AM band Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress 6. Few AM stations are added as AM presets Steps: 1. Long press on any preset number from AM landing screen 2. Press Next/Previous buttons associated with Preset list Expected Result: 1. Currently tuned AM station shall be stored as a preset, to the pressed preset number. Only frequency shall be stored as Preset 2. AM presets shall be displayed and only frequencies shall be stored as Preset. Station name or information are not displayed

For AM band, Station List shall be capable of providing frequency, Preset Number(if available) for each station.

Title: AM Station list - Frequency Information Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Scroll down AM station list Expected Result: 1. AM station list shall be displayed 2. AM frequencies with kHz unit shall be listed. If station list is empty, "No station found" shall be displayed Title: AM Station list - Preset number Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active 6. Few AM stations are added in Preset list Steps: 1. Select Browse option from AM landing screen 2. Scroll down AM station list Expected Result: 1. AM station list shall be displayed 2. Available Preset number associated with AM frequencies shall be displayed. If presets are unavailable, corresponding part will be blank in station list

For AM, it shall be possible to store  (NbMaxPreset ) presets each for AM Note: Refer table 4 for values !image-2022-09-02-21-31-46-759.png!

Title: Maximum presets for AM Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active 6. No AM stations are added as Presets Steps: 1. Press Next button from right side of Preset list 2. Press Previous button from left side of Preset list 3. Long press on any preset number from AM landing screen 4. Stream different AM stations and Repeat the step to store remaining presets Expected Result: 1. Highest index of preset displayed shall be 18. Next button shall be disabled 2. Lowest index of preset displayed shall be 1. Previous button shall be disabled 3. Currently tuned FM station shall be stored as a preset, to the pressed preset number 4. Maximum presets stored for AM stations shall be 18

For DAB, station list shall be capable of providing Multiplex name, station icon (if available), station name , Preset Number(if available) for each station.

Title: Frequency details for listed stations are displayed for DAB station list. Preconditions: - System is up and running - DAB antenna is plugged to tuner - DAB landing screen is active Steps: 1.Select 'Station List Browse' icon, from DAB landing screen Expected Result: 1.Frequency details for listed stations shall be displayed on opening DAB station list. Title: Station name (if available) details for listed stations are displayed for DAB station list. Preconditions: - System is up and running - DAB antenna is plugged to tuner - DAB landing screen is active Steps: 1.Select 'Station List Browse' icon, from DAB landing screen Expected Result: 1.Station name (if available) details for listed stations shall be displayed on opening DAB station list. Title: Verify station information for tuned frequency station Preconditions: - System is up and running (ACC ON->IGN ON). - DAB antenna is plugged to tuner. - DAB landing screen is active. Steps: 1. Tuned to 5A 174.928 MHz freq station. Expected Result: 1. Service name(DAB/DAB+), multiplex name, station name, and PTY information (if available) shall be displayed for tuned DAB frequency station.

For DAB, the system shall sort the station list alphabetically by station .

Title: DAB station list is sorted by PS name alphabetically. Preconditions: 1. System is up and running 2. DAB antenna is plugged to tuner 3. DAB landing screen is active. 4. DAB Station list Sorting is set as per PS name alphabetically . Steps: 1. Select 'Station List Browse' icon, from DAB landing screen. Expected Result: 1. DAB station list shall be sorted by PS name alphabetically.

For FM band, Station List shall be capable of providing frequency, station name (if available), Preset Number(if available), and AF (if available) for each station.

Title: FM Station list - Frequency information Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Scroll down FM station list Expected Result: 1. FM station list shall be displayed 2. FM frequencies with MHz unit shall be listed. If station list is empty, "No station found" shall be displayed Title: FM Station list - Station name Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active 6. Few frequencies with and without Station name is available in FM station list Steps: 1. Select Browse option from FM landing screen 2. Scroll down FM station list Expected Result: 1. FM station list shall be displayed 2. Available station name shall be displayed for FM frequencies. If station name is unavailable, corresponding part will be blank in station list Title: FM Station list - Preset number Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active 6. Few FM stations are added in Preset list Steps: 1. Select Browse option from FM landing screen 2. Scroll down FM station list Expected Result: 1. FM station list shall be displayed 2. Available Preset number associated with FM frequencies shall be displayed. If presets are unavailable, corresponding part will be blank in station list Title: FM Station list - Alternative Frequency Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active 6. Use France_Mobility_FM_ActiveAntenna_AF_Dourdan_24072016 (SSD10) streaming file in Lumantek signal generator for listing Alternate Frequencies Steps: 1. Select Browse option from FM landing screen 2. Scroll down FM station list Expected Result: 1. FM station list shall be displayed 2. Alternate frequencies shall be available for 95.4 MHz frequency. If Alternate frequency for a station is unavailable, corresponding part will be blank in station list Title: FM Station list - Alternate Frequency Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Lumantek Player is plugged to System 5. FM landing screen is active 6. Use France_Mobility_FM_ActiveAntenna_AF_Dourdan_24072016 (SSD10) streaming file in Lumantek signal generator for listing Alternate Frequencies Steps: 1. Select Browse option from FM landing screen 2. Scroll down FM station list Expected Result: 1. FM station list shall be displayed 2. Alternate frequencies shall be available for 95.4 MHz frequency. If Alternate frequency for a station is unavailable, corresponding part will be blank in station list

For FM, Default sorting of station list shall be by PS name.

Title: FM Station list sort - Default value Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System is currently flashed with latest SW or Factory reset has been performed 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Scroll down FM station list 3. Press Back button from Station list and select Radio settings option Expected Result: 1. FM station list shall be displayed 2. FM station list shall be sorted by station name in alphabetical order, by default 3. Radio settings list shall be displayed and 'Sort FM list by station name' option shall be set to ON

For FM, System shall support EON (Enhanced Other Network) management.

Title: FM EON management Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. FM modulator (TRX) is connected with the system 5. Multiple FM stations are available (Other than the station from FM modulator ) 6. FM landing screen is active Steps: 1. Select the browse option from FM landing screen 2. Select any FM station from the list 3. Generate EON TA from TRX 4. Select the "Continue" from the HMI 5. Select "Dismiss" from HMI Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. EON TA from FM station shall be displayed on the HMI 4. EON TA shall be played 5. TA shall be ended and previously tuned station shall be played Title: FM EON TA Support Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. FM modulator (TRX) is connected with the system 5. Multiple FM stations are available (Other than the station from FM modulator ) 6. FM landing screen is active Steps: 1. Select the browse option from FM landing screen 2. Select any FM station from the list 3. Generate EON TA from TRX 4. Select "Dismiss" from HMI 5. Again Generate EON TA from TRX 6. Wait for 5s once TA is displayed on the System 7. Wait for the TA to finish Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. EON TA from FM station shall be displayed on the HMI 4. EON TA shall be cancelled and system shall play the FM station without any issue 5. EON TA from FM station shall be displayed on the HMI 6. EON TA shall be played and currently tuned FM station shall be muted 7. TA shall finish and previously tuned FM station shall be played

For FM, Tuner shall store the preset station information : - Band(AM/FM) - Station frequency - PI code - AF FM List - PS Name

Title: Station frequency & PI Code is displayed for stored preset of FM band Preconditions: 1.System is up and running (ACC ON->IGN ON) 2.FM antenna is plugged to tuner 3.Launch FM landing screen from Band option and any FM station is playing Steps: 1.Long press on preset number in FM station list to add currently tuned station into Preset list. Expected Result: 1.Station frequency and PI Code should be displayed for preset

For FM, it shall be possible to store ( NbMaxPreset) presets each for FM. Note: Refer table 4 for values !image-2022-09-02-21-21-46-879.png!

Title: Maximum presets for FM Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is active 6. No FM stations are added as Presets Steps: 1. Press Next button from right side of Preset list 2. Press Previous button from left side of Preset list 3. Long press on any preset number from FM landing screen 4. Stream different FM stations and Repeat the step to store remaining presets Expected Result: 1. Highest index of preset displayed shall be 18. Next button shall be disabled 2. Lowest index of preset displayed shall be 1. Previous button shall be disabled 3. Currently tuned FM station shall be stored as a preset, to the pressed preset number 4. Maximum presets stored for FM stations shall be 18

If REG is disable / tuner will perform AF switching from current tuned station to the other stations regardless of that / regional code within Program Information (PI) are different between the current tuned station and the other stations.

Title: AF switching while REG is disabled Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active 6. REG is disabled in Radio settings 7. Use a streaming file which have diferent PI code for different stations, in Lumantek signal generator Steps: 1. Select Browse option from FM landing screen 2. Select a station that have different PI code for other stations 3. Wait for few seconds Expected Result: 1. FM station list shall be displayed 2. Selected station shall be played 3. AF switching shall start from current tuned station to other station

If REG is enabled, Tuner will perform AF switching from current tuned station to the other stations only if PI code that  contain same Regional identification code are match.

Title: AF switching while REG is enabled Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active 6. REG is enabled in Radio settings 7. Use a streaming file which have same PI code for different stations, in Lumantek signal generator Steps: 1. Select Browse option from FM landing screen 2. Select a station that have same PI code for other stations 3. Wait for few seconds Expected Result: 1. FM station list shall be displayed 2. Selected station shall be played 3. AF switching shall start from current tuned station to other station

If present, the system shall highlight the tuned station in the station list.

Title: Station highlight for current station Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. DAB Modulator is available and connected to the system 5. DAB landing screen is active Steps: 1. Select the Browse option from the DAB landing screen 2. Select any station from the list 3. Select the Browse option Expected Result: 1. DAB station list shall be displayed 2. Selected station shall be played 3. DAB station list shall be displayed and tuned DAB station shall be highlighted in the list

If tuned station is not available then the system shall notify the user (eg. displaying a 'No Reception' information).

Title: No Reception information over ignition when last tuned frequency is no more valid Preconditions: - System is up and running (ACC ON->IGN ON). - DAB antenna is plugged to tuner. - DAB landing screen is active. - 5A 174.928 MHz frequency is tuned. Steps: 1. Send KEY_POS CAN signal with value '00' to perform Ignition OFF and wait for XX time. 2. Send KEY_POS CAN signal with value '01' to perform Ignition ON. 3. Unplug antenna from Tuner. Expected Result: 1. System shall be off. 2. System shall be on. 3. No Reception information shall be displayed on DAB screen after antenna is unplugged. Title: No Reception information over source change when last tuned frequency is no more valid Preconditions: - System is up and running (ACC ON->IGN ON). - DAB antenna is plugged to tuner. - DAB landing screen is active. Steps: 1. Tune to 5A 174.928 MHz DAB station. 2. Select any other audio sources and play a track. 3. Unplug antenna from Tuner. 4. Now again change Tuner source to DAB using SWC. Expected Result: 1. 5A 174.928 DAB station shall be playing. 2. Any other audio source shall be selected. 3. Last tuned station shall not played and audio is lost. 4. No Reception information shall be displayed on DAB screen after switching from other sources to DAB.

If user tune to any frequency that is invalid station / the user shall hear hiss sound.

Title: Hiss Sound for invalid AM station Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active Steps: 1. Select Browse option from AM Landing screen 2. Select any station from the list 3. Short press Seek_Next arrow from AM landing screen Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. Next AM station with an increased step frequency shall be tuned/seeked. Hiss sound shall be heard if tuned frequency is an invalid station Title: Hiss Sound for invalid FM station Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active Steps: 1. Select Browse option from FM Landing screen 2. Select any station from the list 3. Short press Seek_Next arrow from FM landing screen Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. Next FM station with an increased step frequency shall be tuned/seeked. Hiss sound shall be heard if tuned frequency is an invalid station

If, during the diffusion of an announcement (TA or PTY31), the PI code of the current station is changing, then, at the end of the announcement, System shall be able to restore the station that was tuned before the announcement.

Title: System able to restore the station that was tuned before the announcement. Preconditions: 1. Vehicle battery (Vbat) is ON. 2. Ignition = ON. 3. Home screen appear 4. FM signal simulator is connected with IVI 5. FM landing screen is active and FM streaming is in progress Steps: 1. Tuned station which has AF frequancy & trigger the TA 2. Untrigger TA Expected Result: 1.System should tuned to AF frequancy & display the TA 2. TA should end & PI code of the current station is changed also restore station that was tuned before the announcement.

In case of Handover from DAB to FM, if FM does not support announcement, system shall not play announcement in DAB.

Title: DAB announcement after DAB to FM Handover Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. DAB and FM modulator (TRX) is connected with the system 5. Equivalent FM station is available for DAB station 6. TA and DAB Service Announcements are enabled in radio settings on system 7. Attenuator is connected between DAB modulator and system 8. DAB landing screen is active 9. Stream DAB streaming file having TA in DAB modulator 10. TA settings are disabled in FM modulator (TRX) Steps: 1. Select the browse option and play DAB station having equivalent FM station 2. Increase the attenuation to reduce the DAB signal strength 3. Wait for the TA from the DAB station Expected Result: 1. DAB station list shall be displayed and selected DAB station shall be played 2. DAB to FM handover shall be done and equivalent FM station shall be played 3. System shall not display the announcement from the DAB while playing FM station

In case user selects a empty preset, the tuner shall retain the current select station.

Title: Preset highlight for current playing AM station Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active 6. Few AM stations are added as presets Steps: 1. Select Browse option from AM landing screen 2. Select a station that is associated to a preset, from the list Expected Result: 1. AM station list shall be displayed 2. Selected station shall be played and preset associated to the current station shall be highlighted Title: Preset highlight for current playing FM station Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active 6. Few FM stations are added as presets Steps: 1. Select Browse option from FM landing screen 2. Select a station that is associated to a preset, from the list Expected Result: 1. FM station list shall be displayed 2. Selected station shall be played and preset associated to the current station shall be highlighted

In case user selects a empty preset, the tuner shall retain the current select station.

Title: AM tuner behaviour when selecting empty preset Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active 6. Few empty Presets are available Steps: 1. Select Browse option from AM Landing screen 2. Select any station from the list 3. Select an available empty preset Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. Current AM station shall be still played without any interrupts Title: FM tuner behaviour when selecting empty preset Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active 6. Few empty Presets are available Steps: 1. Select Browse option from FM Landing screen 2. Select any station from the list 3. Select an available empty preset Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. Current FM station shall be still played without any interrupts

It shall be possible to deactivate AM band according to configuration provided by BTEL_BROADCAST_RAD_AM_BA DOTE parameter. If BTEL_BROADCAST_RAD_AM_BA = disable, system shall deactivate AM band. 

Title: AM Band selection when BROADCAST_AM_BAND is set to Disable Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to Disable Steps: 1. Select Radio icon from System Home screen 2. Select Band option from landing screen Expected Result: 1. Radio application shall be launched 2. FM band shall be displayed on Band selection dropdown. AM band shall not be displayed on Band selection dropdown

It shall be possible to deactivate DAB/DAB+ band according to configuration provided by BTEL_BROADCAST_RAD_NUM_BA DOTE parameter: If BTEL_BROADCAST_RAD_NUM_BA is equal to Disable or SPECIFIC NEW ZEALAND, then system shall deactivate DAB/DAB+ band, else it shall enable it.

Title: DOTE parameter for DAB - Disable DAB from band Preconditions: 1. Vehicle battery (Vbat) is ON 2. Ignition = ON 3. Canoe is connected to System 4. System is in Full Run mode 5. Security Access for Variant coding is enabled Steps: 1. Go to Diagnostic Console 2.Go to Engineering Datass 3. Select 2E 21 00 Service 4. Set BTEL _BROADCAST RAD NUM BA_000 to "Disable" and Execute 2E 21 00 SERVICE 5. Perform Sleep Cycle 6. Select radio widget from Homescreen 7. Select band selection icon. 8. Select Radio settings option Expected Result: 1. Diagnostic console should be opened 2. Engineering Datas section should be opened 3. 2E 21 00 Service With availabe services should be displayed 4. 2E 21 00 Service should be executed and BTEL _BROADCAST RAD NUM BA_000 should be set "Disable" 5. Sleep cycle should be completed and system should Wake Up 6. Radio playing screen should be launched. 7. DAB should not be listed in Band selection options. 8. "DAB to FM handover" and "DAB Service announcement" options should not be displayed in Radio settings. Title: DOTE parameter for DAB - Set DAB Area selection to "Specific New Zealand" Preconditions: 1. Vehicle battery (Vbat) is ON 2. Ignition = ON 3. Canoe is connected to System 4. System is in Full Run mode 5. Security Access for Variant coding is enabled Steps: 1. Go to Diagnostic Console 2.Go to Engineering Datass 3. Select 2E 21 00 Service 4. Set BTEL _BROADCAST RAD NUM BA_000 to "Specific New zealand" and Execute 2E 21 00 SERVICE 5. Perform Sleep Cycle 6. Select radio widget from Homescreen 7. Select band selection icon. Expected Result: 1. Diagnostic console should be opened 2. Engineering Datas section should be opened 3. 2E 21 00 Service With availabe services should be displayed 4. 2E 21 00 Service should be executed and BTEL _BROADCAST RAD NUM BA_000 should be set "Specific New zealand" 5. Sleep cycle should be completed and system should Wake Up 6. Radio playing screen should be launched. 7. DAB should be listed in Band selection options.

It shall be possible to store the same frequency at multiple presets.

Title: Same frequency stored at multiple presets for AM band Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress Steps: 1. Long press on first preset number from AM landing screen 2. Long press on second preset number from AM landing screen 3. Long press on third preset number from AM landing screen 4. Select Browse option and observe the preset number for the current tuned station Expected Result: 1. Currently tuned AM station shall be stored as a preset, to the pressed first preset number 2. Currently tuned AM station shall be stored as a preset, to the second preset number 3. Currently tuned AM station shall be stored as a preset, to the third preset number 4. The lowest preset number shall be displayed along with current tuned station Title: Same frequency stored at multiple presets for FM band Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress Steps: 1. Long press on first preset number from FM landing screen 2. Long press on second preset number from FM landing screen 3. Long press on third preset number from FM landing screen 4. Select Browse option and observe the preset number for the current tuned station Expected Result: 1. Currently tuned FM station shall be stored as a preset, to the pressed first preset number 2. Currently tuned FM station shall be stored as a preset, to the second preset number 3. Currently tuned FM station shall be stored as a preset, to the third preset number 4. The lowest preset number shall be displayed along with current tuned station

It shall be possible to store the same station at multiple presets.

Title: Same station can be stored at multiple presets for DAB band Preconditions: - System is up and running (ACC ON->IGN ON). - DAB antenna is plugged to tuner. - DAB landing screen is active and any DAB station is playing. Steps: 1. Long press on first preset number to add currently tuned station into Preset list. 2. Long press on second preset number to add currently tuned station into Preset list. 3. Long press on third preset number to add currently tuned station into Preset list. Expected Result: 1. Currently tuned station shall be added into preset list. 2. Currently tuned station shall be added 2 times into preset list. 3. Currently tuned station shall be added three times in Preset list.

It shall not be possible to deactivate FM band according to configuration provided by BTEL_BROADCAST_RAD_FM_BA DOTE parameter. If BTEL_BROADCAST_RAD_FM_BA = disable, system shall consider as if BTEL_BROADCAST_RAD_FM_BA = 4 (default value). See table 2  !Table2.PNG!  

Title: FM Band frequency range support when BROADCAST_FM_BAND is set to Disable Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to disable 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Scroll down FM station list Expected Result: 1. FM station list shall be displayed 2. Listed FM frequencies shall be in the range of 87.5-108.0 MHz

Manual seek shall tune to the next frequency by increasing the frequency by step size or shall tune to previous frequency by decreasing the frequency by the step size.  Step for manual seek depends on the band (AM or FM) and the band configuration: BTEL_BROADCAST_RAD_AM_BA DOTE parameter for AM and BTEL_BROADCAST_RAD_FM_BA for FM. (see table 2 for FM and table 6 for AM) !Table2.PNG! !Table6.PNG!

Title: AM Band Manual Seek Down when BROADCAST_AM_BAND = 7 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 7 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Select a station from the list 3. Short press Seek_Previous arrow from AM landing screen Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. Previous AM station with a step frequency decreased by 1kHz shall be tuned/seeked Title: AM Band Manual Seek Up when BROADCAST_AM_BAND = 7 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 7 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Select a station from the list 3. Short press Seek_Next arrow from AM landing screen Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. Next AM station with a step frequency increased by 1kHz shall be tuned/seeked Title: AM Band Manual Seek Down when BROADCAST_AM_BAND = 6 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 6 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Select a station from the list 3. Short press Seek_Previous arrow from AM landing screen Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. Previous AM station with a step frequency decreased by 1kHz shall be tuned/seeked Title: AM Band Manual Seek Up when BROADCAST_AM_BAND = 6 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 6 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Select a station from the list 3. Short press Seek_Next arrow from AM landing screen Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. Next AM station with a step frequency increased by 1kHz shall be tuned/seeked Title: AM Band Manual Seek Down when BROADCAST_AM_BAND = 5 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 5 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Select a station from the list 3. Short press Seek_Previous arrow from AM landing screen Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. Previous AM station with a step frequency decreased by 1kHz shall be tuned/seeked Title: AM Band Manual Seek Up when BROADCAST_AM_BAND = 5 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 5 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Select a station from the list 3. Short press Seek_Next arrow from AM landing screen Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. Next AM station with a step frequency increased by 1kHz shall be tuned/seeked Title: AM Band Manual Seek Down when BROADCAST_AM_BAND = 4 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 4 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Select a station from the list 3. Short press Seek_Previous arrow from AM landing screen Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. Previous AM station with a step frequency decreased by 1kHz shall be tuned/seeked Title: AM Band Manual Seek Up when BROADCAST_AM_BAND = 4 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 4 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Select a station from the list 3. Short press Seek_Next arrow from AM landing screen Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. Next AM station with a step frequency increased by 1kHz shall be tuned/seeked Title: AM Band Manual Seek Down when BROADCAST_AM_BAND = 3 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 3 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Select a station from the list 3. Short press Seek_Previous arrow from AM landing screen Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. Previous AM station with a step frequency decreased by 1kHz shall be tuned/seeked Title: AM Band Manual Seek Up when BROADCAST_AM_BAND = 3 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 3 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Select a station from the list 3. Short press Seek_Next arrow from AM landing screen Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. Next AM station with a step frequency increased by 1kHz shall be tuned/seeked Title: AM Band Manual Seek Down when BROADCAST_AM_BAND = 8 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 8 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Select a station from the list 3. Short press Seek_Previous arrow from AM landing screen Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. Previous AM station with a step frequency decreased by 1kHz shall be tuned/seeked Title: AM Band Manual Seek Up when BROADCAST_AM_BAND = 8 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 8 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Select a station from the list 3. Short press Seek_Next arrow from AM landing screen Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. Next AM station with a step frequency increased by 1kHz shall be tuned/seeked Title: AM Band Manual Seek Down when MW BROADCAST_AM_BAND = 6 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 6 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Select a station from the list 3. Short press Seek_Previous arrow from AM landing screen 4. Again Short press Seek_Previous arrow from AM landing screen Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. Previous AM station with a step frequency decreased by 1kHz shall be tuned/seeked 4. Previous AM station with a step frequency decreased by 1kHz shall be tuned/seeked again Title: AM Band Manual Seek Down when BROADCAST_AM_BAND = 1 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 1 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Select a station from the list 3. Short press Seek_Previous arrow from AM landing screen 4. Again Short press Seek_Previous arrow from AM landing screen Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. Previous AM station with a step frequency decreased by 1kHz shall be tuned/seeked 4. Previous AM station with a step frequency decreased by 1kHz shall be tuned/seeked again Title: AM Band Manual Seek Up when MW BROADCAST_AM_BAND = 6 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 6 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Select a station from the list 3. Short press Seek_Next arrow from AM landing screen 4. Again Short press Seek_Next arrow from AM landing screen Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. Next AM station with a step frequency increased by 1kHz shall be tuned/seeked 4. Next AM station with a step frequency increased by 1kHz shall be tuned/seeked again Title: AM Band Manual Seek Up when BROADCAST_AM_BAND = 1 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 001 6. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Select a station from the list 3. Short press Seek_Next arrow from AM landing screen 4. Again Short press Seek_Next arrow from AM landing screen Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. Next AM station with a step frequency increased by 1kHz shall be tuned/seeked 4. Next AM station with a step frequency increased by 1kHz shall be tuned/seeked again Title: FM Band Manual Seek Up when BROADCAST_FM_BAND = 1 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 1 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Select a station from the list 3. Press Manual Seek_Next arrow from FM landing screen Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. Next FM station with a step frequency increased by 0.05 MHz shall be tuned/seeked Title: FM Band Manual Seek Down when BROADCAST_FM_BAND = 1 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 1 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Select a station from the list 3. Short press Seek_Previous arrow from FM landing screen Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. Previous FM station with a step frequency decreased by 0.05 MHz shall be tuned/seeked Title: FM Band Manual Seek Up when BROADCAST_FM_BAND = 4 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 4 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Select a station from the list 3. Press manual Seek_Next arrow from FM landing screen Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. Next FM station with a step frequency increased by 0.05 MHz shall be tuned/seeked Title: FM Band Manual Seek Down when BROADCAST_FM_BAND = 4 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 4 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Select a station from the list 3. Press manual Seek_Previous arrow from FM landing screen Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. Previous FM station with a step frequency decreased by 0.05 MHz shall be tuned/seeked Title: FM Band Manual Seek Up when BROADCAST_FM_BAND = 3 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 3 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Select a station from the list 3. Press manual Seek_Next arrow from FM landing screen Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. Next FM station with a step frequency increased by 0.05 MHz shall be tuned/seeked Title: FM Band Manual Seek Down when BROADCAST_FM_BAND = 3 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 3 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Select a station from the list 3. Press manual Seek_Previous arrow from FM landing screen Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. Previous FM station with a step frequency decreased by 0.05 MHz shall be tuned/seeked Title: FM Band Manual Seek Up when BROADCAST_FM_BAND = 2 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 2 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Select a station from the list 3. Press manual Seek_Next arrow from FM landing screen Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. Next FM station with a step frequency increased by 0.05 MHz shall be tuned/seeked Title: FM Band Manual Seek Down when BROADCAST_FM_BAND = 2 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 2 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Select a station from the list 3. Press manual Seek_Previous arrow from FM landing screen Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. Previous FM station with a step frequency decreased by 0.05 MHz shall be tuned/seeked Title: FM Band Manual Seek Up when BROADCAST_FM_BAND = 7 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 7 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Select a station from the list 3. Press manual Seek_Next arrow from FM landing screen Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. Next FM station with a step frequency increased by 0.05 MHz shall be tuned/seeked Title: FM Band Manual Seek Down when BROADCAST_FM_BAND = 7 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 7 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Select a station from the list 3. Press manual Seek_Previous arrow from FM landing screen Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. Previous FM station with a step frequency decreased by 0.05 MHz shall be tuned/seeked Title: FM Band Manual Seek Up when BROADCAST_FM_BAND = 5 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 5 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Select a station from the list 3. Press manual Seek_Next arrow from FM landing screen. Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. Next FM station with a step frequency increased by 0.05 MHz shall be tuned/seeked Title: FM Band Manual Seek Down when BROADCAST_FM_BAND =5 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 5 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Select a station from the list 3. Press manual Seek_Previous arrow from FM landing screen Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. Previous FM station with a step frequency decreased by 0.05 MHz shall be tuned/seeked Title: FM Band Manual Seek Up when BROADCAST_FM_BAND = 6 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 6 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Select a station from the list 3. Press manual Seek_Next arrow from FM landing screen Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. Next FM station with a step frequency increased by 0.05 MHz shall be tuned/seeked Title: FM Band Manual Seek Down when BROADCAST_FM_BAND =6 Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 6 6. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Select a station from the list 3. Press manual Seek_Previous arrow from FM landing screen 4. Again press manual Seek_Previous arrow from FM landing screen Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. Previous FM station with a step frequency decreased by 0.05 MHz shall be tuned/seeked 4. Previous FM station with a step frequency decreased by 0.05 MHz shall be tuned/seeked again

On DAB source activation, the system shall tune and start playing the DAB station than was tuned at the previous DAB source use, irrespective of the received signal strength. Some use case examples: 1. After ignition cycle 2. Changing source from other source by SWC/touchscreen 3. Changing tuner band from AM/FM

Title: DAB station details persistency after Ignition Cycle Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. DAB Modulator is available and connected to the system 5. DAB landing screen is active Steps: 1. Select the Browse option from the DAB landing screen 2. Select any station from the list 3. Perform Ignition cycle (Ignition OFF-> Ignition ON) 4. Select Radio icon from System Home screen and launch DAB source Expected Result: 1. DAB station list shall be displayed 2. Selected station shall be played and tuned station details(Station name, Multiplex name, Station number, Station logo, Radio Text etc) shall be displayed 3. System shall be turned ON after ignition cycle 4. Previously tuned DAB station shall be played and station details shall be displayed Title: DAB station details persistency during source switch to AM Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. DAB Modulator is available and connected to the system 5. AM Modulator is available and connected to the system 6. DAB landing screen is active Steps: 1. Select the Browse option from the DAB landing screen 2. Select any station from the list 3. Launch AM source from Band option 4. Select the Browse option from the AM landing screen 5. Select any station from the list 6. Launch DAB source from Band option Expected Result: 1. DAB station list shall be displayed 2. Selected station shall be played and tuned station details(Station name, Multiplex name, Station number, Station logo, Radio Text etc) shall be displayed 3. AM source shall be launched 4. AM station list shall be displayed 5. Selected station shall be played 6. Previously tuned DAB station shall be played and station details shall be displayed Title: DAB station details persistency during source switch to FM Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. DAB Modulator is available and connected to the system 5. FM Modulator is available and connected to the system 6. DAB landing screen is active Steps: 1. Select the Browse option from the DAB landing screen 2. Select any station from the list 3. Launch FM source from Band option 4. Select the Browse option from the FM landing screen 5. Select any station from the list 6. Launch DAB source from Band option Expected Result: 1. DAB station list shall be displayed 2. Selected station shall be played and tuned station details(Station name, Multiplex name, Station number, Station logo, Radio Text etc) shall be displayed 3. FM source shall be launched 4. FM station list shall be displayed 5. Selected station shall be played 6. Previously tuned DAB station shall be played and station details shall be displayed Title: DAB station details persistency during source switch to USB Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. DAB Modulator is available and connected to the system 5. USB having playable audio files are connected with the system 6. DAB landing screen is active Steps: 1. Select the Browse option from the DAB landing screen 2. Select any station from the list 3. Select the media icon from the control bar 4. Launch USB media source from MyDevice icon 5. Select List option and play a song from any library 6. Select Radio icon from System Home screen and launch DAB source Expected Result: 1. DAB station list shall be displayed 2. Selected station shall be played and tuned station details(Station name, Multiplex name, Station number, Station logo, Radio Text etc) shall be displayed 3. Media application shall be launched 4. USB media source shall be launched 5. Selected song shall be played 6. Previously tuned DAB station shall be played and station details shall be displayed Title: DAB station details persistency during source switch to BT Media Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. DAB Modulator is available and connected to the system 5. BT device having playable audio files are connected to the system 6. DAB landing screen is active Steps: 1. Select the Browse option from the DAB landing screen 2. Select any station from the list 3. Select the media icon from the control bar 4. Launch BT media source from MyDevice icon 5. Select List option and play a song from any library 6. Select Radio icon from System Home screen and launch DAB source Expected Result: 1. DAB station list shall be displayed 2. Selected station shall be played and tuned station details(Station name, Multiplex name, Station number, Station logo, Radio Text etc) shall be displayed 3. Media application shall be launched 4. BT media source shall be launched 5. Selected song shall be played 6. Previously tuned DAB station shall be played and station details shall be displayed Title: Irrespective of the signal strength last played DAB station is played Preconditions: - System is up and running. - DAB antenna is plugged to tuner. - DAB landing screen is active. - Attenuator is Plugged. - DAB service linking is set to OFF. Steps: 1. Tune to 5A 174.928 MHz DAB station. 2. Select any other available audio source ( BT , USB etc). 3. Increase attenuator value to decrease signal quality. 4. Change the tuner source to DAB by pressing SWC source switch. Expected Result: 1. 5A 174.928 MHz DAB station shall be playing. 2. Any other audio source shall be selected. 3. Audio with noise shall be heard. 4. Last played DAB station i.e. 5A 174.928 MHz shall be played. Title: Last tuned DAB station played after Source switching from DAB to USB via SWC Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. DAB Modulator is available and connected to the system 5.USB having playable audio files are connected with the system 6. SWC is connected to the system 7. No BT device is connected with the system 8. DAB landing screen is active Steps: 1. Select the Browse option from the DAB landing screen 2. Select any station from the list 3. Short press SRC Button from SWC 4. Short press SRC Button from SWC 5. Short press SRC Button from SWC 6. Short press SRC Button from SWC Expected Result: 1. DAB station list shall be displayed 2. Selected station shall be played and tuned station details(Station name, Multiplex name, Station number, Station logo, Radio Text etc) shall be displayed 3. FM source shall be launched 4. AM source shall be launched 5. USB source shall be launched 6. DAB source shall be launched and previously tuned DAB station shall be played Title: Last tuned DAB station played after Source switching from DAB to BT media via SWC Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. DAB Modulator is available and connected to the system 5. SWC is connected to the system 6. No USB device is connected with the system 7. BT device with playable audio files are connected with the system 8. DAB landing screen is active Steps: 1. Select the Browse option from the DAB landing screen 2. Select any station from the list 3. Short press SRC Button from SWC 4. Short press SRC Button from SWC 5. Short press SRC Button from SWC 6. Short press SRC Button from SWC Expected Result: 1. DAB station list shall be displayed 2. Selected station shall be played and tuned station details(Station name, Multiplex name, Station number, Station logo, Radio Text etc) shall be displayed 3. FM source shall be launched 4. AM source shall be launched 5. BT source shall be launched 6. DAB source shall be launched and previously tuned DAB station shall be played Title: Last tuned DAB station played after source switching from DAB to AM/FM via SWC Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. DAB Modulator is available and connected to the system 5. AM/FM Modulator is available and connected to the system 6. SWC is connected to the system 7. No other device ( BT, USB ) are connected to the system 8. DAB landing screen is active Steps: 1. Select the Browse option from the DAB landing screen 2. Select any station from the list 3. Short press SRC Button from SWC 4. Short press SRC Button from SWC 5. Short press SRC Button from SWC Expected Result: 1. DAB station list shall be displayed 2. Selected station shall be played and tuned station details(Station name, Multiplex name, Station number, Station logo, Radio Text etc) shall be displayed 3. FM source shall be launched 4. AM source shall be launched 5. DAB source shall be launched and previously tuned DAB station shall be played Title: Last tuned DAB station plays after switching from BT Media to Radio Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. DAB landing screen is active 6. BT device having valid audio files is connected to System Steps: 1. Select Browse option from DAB Landing screen 2. Select any station from the list 3. Press Media icon from left side of Radio screen 4. Launch BT Media source from MyDevice icon 5. Select List option and play a song from any library folder 6. Press Radio icon from left side of Media screen Expected Result: 1. DAB station list shall be displayed 2. Selected DAB station shall be played 3. Media screen shall be displayed. DAB streaming shall be stopped 4. BT Media source shall be launched 5. Selected song shall be played 6. Radio shall be launched and previously tuned DAB station shall be streamed Title: Last tuned DAB station plays after switching from USB to Radio Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. DAB landing screen is active 6. USB device having valid audio files is connected to System Steps: 1. Select Browse option from DAB Landing screen 2. Select any station from the list 3. Press Media icon from left side of Radio screen 4. Launch USB source from MyDevice icon 5. Select List option and play a song from any library folder 6. Press Radio icon from left side of Media screen Expected Result: 1. DAB station list shall be displayed 2. Selected DAB station shall be played 3. Media screen shall be displayed. DAB streaming shall be stopped 4. USB Media source shall be launched 5. Selected song shall be played 6. Radio shall be launched and previously tuned DAB station shall be streamed Title: Last tuned DAB station plays after switching from iPod to Radio Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. DAB landing screen is active 6. iPod device having valid audio files is connected to System Steps: 1. Select Browse option from DAB Landing screen 2. Select any station from the list 3. Press Media icon from left side of Radio screen 4. Launch iPod source from MyDevice icon 5. Select List option and play a song from any library folder 6. Press Radio icon from left side of Media screen Expected Result: 1. DAB station list shall be displayed 2. Selected DAB station shall be played 3. Media screen shall be displayed. DAB streaming shall be stopped 4. iPod Media source shall be launched 5. Selected song shall be played 6. Radio shall be launched and previously tuned DAB station shall be streamed

On PTY31 end, the system shall restore the previous source in less than 250 ms. (KPI)

Title: USB audio playback resumes within 250ms after PTY31 ends Preconditions: 1. Vehicle battery (Vbat) is ON. 2. Ignition = ON. 3. Home screen appear 4. FM/AM signal simulator is connected with IVI 5. USB is connected with system & audio playback is in progress 6. USB audio playback screen is active Steps: 1.Trigger PTY31 from simulator 2. Wait till PTY 31 ends Expected Result: 1.1 USB audio playback should be pause & PTY31 announcement should be audible. 1.2 Radio service announcement pop up should be displayed on HMI 2. Radio service announcement pop up should be dismiss & USB audio playback should be resumed within 250ms Title: BT audio playback resumes within 250ms after PTY31 ends Preconditions: 1. Vehicle battery (Vbat) is ON. 2. Ignition = ON. 3. Home screen appear 4. FM/AM signal simulator is connected with IVI 5. BT is connected with system & audio playback is in progress 6. BT audio playback screen is active Steps: 1.Trigger PTY31 from simulator 2. Wait till PTY 31 ends Expected Result: 1.1 BT audio playback should be pause & PTY31 announcement should be audible. 1.2 Radio service announcement pop up should be displayed on HMI 2. Radio service announcement pop up should be dismiss & BT audio playback should be resumed within 250ms Title: iPod audio playback resumes within 250ms after PTY31 ends Preconditions: 1. Vehicle battery (Vbat) is ON. 2. Ignition = ON. 3. Home screen appear 4. FM/AM signal simulator is connected with IVI 5. iPod is connected with system & audio playback is in progress 6. iPod audio playback screen is active Steps: 1.Trigger PTY31 from simulator 2. Wait till PTY 31 ends Expected Result: 1.1 iPod audio playback should be pause & PTY31 announcement should be audible. 1.2 Radio service announcement pop up should be displayed on HMI 2. Radio service announcement pop up should be dismiss & iPod audio playback should be resumed within 250ms Title: Wireless AA audio playback resumes within 250ms after PTY31 ends Preconditions: 1. Vehicle battery (Vbat) is ON. 2. Ignition = ON. 3. Home screen appear 4. FM/AM signal simulator is connected with IVI 5. Wired AA is connected with system & audio playback is in progress 6. Wired AA audio playback screen is active Steps: 1.Trigger PTY31 from simulator 2. Wait till PTY 31 ends Expected Result: 1.1 Wireless AA audio playback should be pause & PTY31 announcement should be audible. 1.2 Radio service announcement pop up should be displayed on HMI 2. Radio service announcement pop up should be dismiss & Wired AA audio playback should be resumed within 250ms Title: Wireless CP audio playback resumes within 250ms after PTY31 ends Preconditions: 1. Vehicle battery (Vbat) is ON. 2. Ignition = ON. 3. Home screen appear 4. FM/AM signal simulator is connected with IVI 5. Wireless CP is connected with system & audio playback is in progress 6. Wireless CP audio playback screen is active Steps: 1.Trigger PTY31 from simulator 2. Wait till PTY 31 ends Expected Result: 1.1 Wireless CP audio playback should be pause & PTY31 announcement should be audible. 1.2 Radio service announcement pop up should be displayed on HMI 2. Radio service announcement pop up should be dismiss & Wireless CP audio playback should be resumed within 250ms Title: Wired AA audio playback resumes within 250ms after PTY31 ends Preconditions: 1. Vehicle battery (Vbat) is ON. 2. Ignition = ON. 3. Home screen appear 4. FM/AM signal simulator is connected with IVI 5. Wired AA is connected with system & audio playback is in progress 6. Wired AA audio playback screen is active Steps: 1.Trigger PTY31 from simulator 2. Wait till PTY 31 ends Expected Result: 1.1 Wired AA audio playback should be pause & PTY31 announcement should be audible. 1.2 Radio service announcement pop up should be displayed on HMI 2. Radio service announcement pop up should be dismiss & Wired AA audio playback should be resumed within 250ms Title: Wired CP audio playback resumes within 250ms after PTY31 ends Preconditions: 1. Vehicle battery (Vbat) is ON. 2. Ignition = ON. 3. Home screen appear 4. FM/AM signal simulator is connected with IVI 5. Wired CP is connected with system & audio playback is in progress 6. Wired CP audio playback screen is active Steps: 1.Trigger PTY31 from simulator 2. Wait till PTY 31 ends Expected Result: 1.1 Wired CP audio playback should be pause & PTY31 announcement should be audible. 1.2 Radio service announcement pop up should be displayed on HMI 2. Radio service announcement pop up should be dismiss & Wired CP audio playback should be resumed within 250ms

On bi-tuner variant, when the DAB seamless option is OFF, system shall update DAB and FM station lists in background (ie. without any side effect for user).

Title: Station list update when DAB to FM Handover is 'OFF' Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. DAB Modulator is available and connected to the system 5. FM Modulator is available and connected to the system. 6. DAB to FM handover setting is set to 'OFF' 7. DAB landing screen is active Steps: 1. Select Browse option from DAB Landing screen 2. Launch FM source from Band option 3. Select Browse option from FM Landing screen Expected Result: 1. DAB station list shall be displayed with the available stations 2. FM source shall be launched 3. FM station list shall be displayed with the available stations

On bi-tuner variant, when tuned band is AM or FM, system shall update respectively AM or FM station list in background (ie. without any side effect for user).

Title: AM Background Station List Update for a bi-tuner variant Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active Steps: 1. Select Browse option from AM Landing screen 2. Select any station from the list 3. Wait for few seconds and Select Browse option from AM Landing screen Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. AM Station list shall be updated in background and current streaming shall not be interrupted Title: FM Background Station List Update for a bi-tuner variant Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active Steps: 1. Select Browse option from FM Landing screen 2. Select any station from the list 3. Wait for few seconds and Select Browse option from FM Landing screen Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. FM Station list shall be updated in background and current streaming shall not be interrupted

On cold boot, the system shall start DAB tuner audio in 30 seconds after boot trigger.

Title: DAB Tuner audio after cold boot Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. DAB landing screen is active Steps: 1. Select Browse option from DAB Landing screen 2. Select any station from the list 3. Restart the System Expected Result: 1. DAB station list shall be displayed 2. Selected DAB station shall be played 3. System shall be turned ON after reboot. Previoulsy streamed DAB station shall be played and audio shall be heard within 30 seconds on System startup after reboot

On cold boot, the system shall start tuner AM or FM audio in 30 seconds after boot trigger.

Title: AM Tuner audio after cold boot Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active Steps: 1. Select Browse option from AM Landing screen 2. Select any station from the list 3. Restart the System Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. System shall be turned ON after reboot. Previoulsy streamed AM station shall be played and audio shall be heard within 30 seconds on System startup after reboot Title: FM Tuner audio after cold boot Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active Steps: 1. Select Browse option from FM Landing screen 2. Select any station from the list 3. Restart the System Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. System shall be turned ON after reboot. Previoulsy streamed FM station shall be played and audio shall be heard within 30 seconds on System startup after reboot

On first start / the default tuner source selected shall be FM band tuner.

Title: FM Band is selected by default after first start Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Select a station from the list 3. Perform Factory Reset from Settings application 4. Select Radio application from Home screen Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. Factory Reset has been successfully performed 4. FM Band shall be selected by default. FM landing screen shall be displayed

On first time AM source activation, without station list, the default tuned station shall be the lowest frequency of AM Band.

Title: Default station for AM band when BROADCAST_AM_BAND = 1 without station list Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 1 6. AM landing screen is active 7. No valid AM stations are available Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen 3. Press Band option and launch AM source Expected Result: 1. Factory Reset has been successfully performed 2. Radio application shall be launched 3. AM Band shall be selected and tuned with lowest frequency 153kHz Title: Default station for AM band when BROADCAST_AM_BAND = 2 without station list Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 2 6. AM landing screen is active 7. No valid AM stations are available Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen 3. Press Band option and launch AM source Expected Result: 1. Factory Reset has been successfully performed 2. Radio application shall be launched 3. AM Band shall be selected and tuned with lowest frequency 531kHz Title: Default station for AM band when BROADCAST_AM_BAND = 3 without station list Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 3 6. AM landing screen is active 7. No valid AM stations are available Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen 3. Press Band option and launch AM source Expected Result: 1. Factory Reset has been successfully performed 2. Radio application shall be launched 3. AM Band shall be selected and tuned with lowest frequency 531kHz Title: Default station for AM band when BROADCAST_AM_BAND = 4 without station list Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 4 6. AM landing screen is active 7. No valid AM stations are available Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen 3. Press Band option and launch AM source Expected Result: 1. Factory Reset has been successfully performed 2. Radio application shall be launched 3. AM Band shall be selected and tuned with lowest frequency 531kHz Title: Default station for AM band when BROADCAST_AM_BAND = 5 without station list Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 5 6. AM landing screen is active 7. No valid AM stations are available Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen 3. Press Band option and launch AM source Expected Result: 1. Factory Reset has been successfully performed 2. Radio application shall be launched 3. AM Band shall be selected and tuned with lowest frequency 530kHz Title: Default station for AM band when BROADCAST_AM_BAND = 8 without station list Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND parameter value is set to 8 6. AM landing screen is active 7. No valid AM stations are available Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen 3. Press Band option and launch AM source Expected Result: 1. Factory Reset has been successfully performed 2. Radio application shall be launched 3. AM Band shall be selected and tuned with lowest frequency 540kHz Title: Default station for AM band when LW BROADCAST_AM_BAND = 6 without station list Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND (LW) parameter value is set to 6 6. AM landing screen is active Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen 3. Press Band option and launch AM source Expected Result: 1. Factory Reset has been successfully performed 2. Radio application shall be launched 3. AM Band shall be selected and tuned with lowest frequency 153kHz Title: Default station for AM band when MW BROADCAST_AM_BAND = 6 without station list Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND (MW) parameter value is set to 6 6. AM landing screen is active Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen 3. Press Band option and launch AM source Expected Result: 1. Factory Reset has been successfully performed 2. Radio application shall be launched 3. AM Band shall be selected and tuned with lowest frequency 531kHz Title: Default station for AM band when LW BROADCAST_AM_BAND = 7 without station list Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND (LW) parameter value is set to 7 6. AM landing screen is active Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen 3. Press Band option and launch AM source Expected Result: 1. Factory Reset has been successfully performed 2. Radio application shall be launched 3. AM Band shall be selected and tuned with lowest frequency 153kHz Title: Default station for AM band when MW BROADCAST_AM_BAND = 7 without station list Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_AM_BAND (MW) parameter value is set to 7 6. AM landing screen is active Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen 3. Press Band option and launch AM source Expected Result: 1. Factory Reset has been successfully performed 2. Radio application shall be launched 3. AM Band shall be selected and tuned with lowest frequency 531kHz

On first time FM source activation / without station list / the default tuned station shall be the lowest frequency of FM Band.

Title: Default station for FM band when BROADCAST_FM_BAND = 001 without station list Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 001 6. FM landing screen is active Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen Expected Result: 1. Factory Reset has been successfully performed 2. FM Band shall be selected and tuned with lowest frequency 76.0MHz Title: Default station for FM band when BROADCAST_FM_BAND = 011 without station list Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 011 6. FM landing screen is active Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen Expected Result: 1. Factory Reset has been successfully performed 2. FM Band shall be selected and tuned with lowest frequency 76.0MHz Title: Default station for FM band when BROADCAST_FM_BAND = 100 without station list Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 100 6. FM landing screen is active Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen Expected Result: 1. Factory Reset has been successfully performed 2. FM Band shall be selected and tuned with lowest frequency 87.5MHz Title: Default station for FM band when BROADCAST_FM_BAND = 010 without station list Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 010 6. FM landing screen is active Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen Expected Result: 1. Factory Reset has been successfully performed 2. FM Band shall be selected and tuned with lowest frequency 76.0MHz Title: Default station for FM band when BROADCAST_FM_BAND = 101 without station list Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 101 6. FM landing screen is active Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen Expected Result: 1. Factory Reset has been successfully performed 2. FM Band shall be selected and tuned with lowest frequency 87.5MHz Title: Default station for FM band when BROADCAST_FM_BAND = 110 without station list Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 110 6. FM landing screen is active Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen Expected Result: 1. Factory Reset has been successfully performed 2. FM Band shall be selected and tuned with lowest frequency 87.9MHz Title: Default station for FM band when BROADCAST_FM_BAND = 111 without station list Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. System BROADCAST_FM_BAND parameter value is set to 111 6. FM landing screen is active Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen Expected Result: 1. Factory Reset has been successfully performed 2. FM Band shall be selected and tuned with lowest frequency 87.9MHz

On restore factory defaults / preset data for all tuner sources shall be set to default values.

Title: AM preset stations default values Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active 6. Few AM stations are added in Preset list Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen and launch AM source 3. Observe AM Preset list Expected Result: 1. Factory Reset has been successfully performed 2. AM landing screen shall be displayed 3. All Presets stations stored earlier are clear and empty. '--" shall be displayed for all presets in the list Title: Preset data for FM tuner source is set to default value after factory data reset Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active 6. Few FM stations are added in Preset list Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen and launch FM source 3. Observe FM Preset list Expected Result: 1. Factory Reset has been successfully performed 2. FM landing screen shall be displayed 3. All Presets stations stored earlier are cleared and empty. '--" shall be displayed for all presets in the list

On restore factory defaults / station list data and last tuned station information for tuner sources shall be deleted.

Title: AM Station List details after Factory Reset Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress 6. AM station list is available Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen and launch AM source 3. Observe AM Station list Expected Result: 1. Factory Reset has been successfully performed 2. AM landing screen shall be displayed 3. Previous AM Station list shall be deleted and 'No station found' shall be displayed Title: FM Station List details after Factory Reset Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress 6. FM station list is available Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen and launch FM source 3. Observe FM Station list Expected Result: 1. Factory Reset has been successfully performed 2. FM landing screen shall be displayed 3. Previous FM Station list shall be deleted and 'No station found' shall be displayed Title: Last tuned FM station details after performing Factory Reset Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen and launch FM source Expected Result: 1. Factory Reset has been successfully performed 2. FM landing screen shall be displayed and last tuned station information shall be cleared Title: Last tuned AM station details after performing Factory Reset Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen and launch AM source Expected Result: 1. Factory Reset has been successfully performed 2. AM landing screen shall be displayed and last tuned station information shall be cleared

On restore factory defaults, DAB station list shall be empty (see SRS_Tuner_DAB_0017) and DAB tuned station shall be the same as on first tuner startup (see SRS_Tuner_DAB_0017).

Title: Last tuned DAB station Info gets deleted after performing Factory Reset. Preconditions: - System is up and running (ACC ON->IGN ON). - DAB antenna is plugged to tuner . - DAB landing screen is active. Steps: 1.Tune any Valid DAB Station. 2.Perform Factory Reset and wait till System boot up after factory reset. 3.Unplug antenna from Tuner. 4.Launch Radio application. 5.Select DAB band. Expected Result: 1.Valid DAB station shall be tuned properly. 2.System shall be booted up without any issues. 3.Antenna shall be unplugged properly. 4.Radio application shall be launched without any issues. 5.Previously tuned Station information details for DAB Tuner Source gets deleted after performing Factory Reset.

On restore factory defaults, all the user DAB tuner settings parameters shall be set to their respective default value.

Title: Default State for DAB Service Announcements setting when previously set to ON Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. DAB landing screen is active 6. DAB Service Announcements setting is set to 'OFF' Steps: 1. Select Settings option from DAB landing screen 2. Turn ON DAB Service Announcements settings option 3. Perform Factory Reset from Settings application 4. Select Radio application from Home screen 5. Launch DAB source from Band option 6. Select Settings option from DAB landing screen and observe DAB Service Announcements setting Expected Result: 1. Radio settings screen shall be displayed 2. DAB Service Announcements setting shall be set to 'ON' 3. Factory Reset has been successfully performed 4. Radio application shall be displayed 5. DAB landing screen shall be displayed 6. Radio settings screen shall be displayed and by default DAB Service Announcements setting option shall be set to 'OFF' Title: Default State for DAB Service Announcements setting when previously set to OFF Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. DAB landing screen is active 6. DAB Service Announcements setting is set to 'ON' Steps: 1. Select Settings option from DAB landing screen 2. Turn OFF DAB Service Announcements settings option 3. Perform Factory Reset from Settings application 4. Select Radio application from Home screen 5. Launch DAB source from Band option 6. Select Settings option from DAB landing screen and observe DAB Service Announcements setting Expected Result: 1. Radio settings screen shall be displayed 2. DAB Service Announcements setting shall be set to 'OFF' 3. Factory Reset has been successfully performed 4. Radio application shall be displayed 5. DAB landing screen shall be displayed 6. Radio settings screen shall be displayed and by default DAB Service Announcements setting option shall be set to 'OFF' Title: Default State for Radio Text (RT) setting when previously set to OFF Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. DAB landing screen is active 6. Radio Text (RT) setting is set to 'ON' Steps: 1. Select Settings option from DAB landing screen 2. Turn OFF Radio Text (RT) setting option 3. Perform Factory Reset from Settings application 4. Select Radio application from Home screen 5. Launch DAB source from Band option 6. Select Settings option from DAB landing screen and observe Radio Text (RT) setting Expected Result: 1. Radio settings screen shall be displayed 2. Radio Text (RT) setting shall be set to 'OFF' 3. Factory Reset has been successfully performed 4. Radio application shall be displayed 5. DAB landing screen shall be displayed 6. Radio settings screen shall be displayed and by default Radio Text (RT) setting option shall be set to 'ON' Title: Default State for Radio Text (RT) setting when previously set to ON Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. DAB landing screen is active 6. Radio Text (RT) setting is set to 'ON' Steps: 1. Select Settings option from DAB landing screen 2. Turn OFF Radio Text (RT) setting option 3. Perform Factory Reset from Settings application 4. Select Radio application from Home screen 5. Launch DAB source from Band option 6. Select Settings option from DAB landing screen and observe Radio Text (RT) setting Expected Result: 1. Radio settings screen shall be displayed 2. Radio Text (RT) setting shall be set to 'OFF' 3. Factory Reset has been successfully performed 4. Radio application shall be displayed 5. DAB landing screen shall be displayed 6. Radio settings screen shall be displayed and by default Radio Text (RT) setting option shall be set to 'ON' Title: Default State for DAB to FM seamless setting when previously set to ON Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. DAB landing screen is active 6. DAB to FM handover setting is set to 'OFF' Steps: 1. Select Settings option from DAB landing screen 2. Turn ON DAB to FM handover settings option 3. Perform Factory Reset from Settings application 4. Select Radio application from Home screen 5. Launch DAB source from Band option 6. Select Settings option from DAB landing screen and observe DAB to FM handover setting Expected Result: 1. Radio settings screen shall be displayed 2. DAB to FM handover setting shall be set to 'ON' 3. Factory Reset has been successfully performed 4. Radio application shall be displayed 5. DAB landing screen shall be displayed 6. Radio settings screen shall be displayed and by default DAB to FM handover setting option shall be set to 'ON' Title: Default State for DAB to FM seamless setting when previously set to OFF Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. DAB landing screen is active 6. DAB to FM handover setting is set to 'ON' Steps: 1. Select Settings option from DAB landing screen 2. Turn OFF DAB to FM handover settings option 3. Perform Factory Reset from Settings application 5. Select Radio application from Home screen 6. Launch DAB source from Band option 7. Select Settings option from DAB landing screen and observe DAB to FM handover setting Expected Result: 1. Radio settings screen shall be displayed 2. DAB to FM handover setting shall be set to 'OFF' 3. Factory Reset has been successfully performed 4. Radio application shall be displayed 5. DAB landing screen shall be displayed 6. Radio settings screen shall be displayed and by default DAB to FM handover setting option shall be set to 'ON'

On restore factory defaults, preset data for all tuner sources shall be set to default values.

Title: Preset data for DAB tuner source is set to default value after factory data reset Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. DAB landing screen is active 6. Few DAB stations are added in Preset list Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen and launch DAB source 3. Observe DAB Preset list Expected Result: 1. Factory Reset has been successfully performed 2. DAB landing screen shall be displayed 3. All Presets stations stored earlier are cleared and empty

On selection of tuner source / the last tuned station shall be tuned irrespective of signal strength.

Title: Last tuned AM station is streamed irrespective of signal strength Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active 6. USB device having valid audio files is connected to System Steps: 1. Select Browse option from AM Landing screen 2. Select any station from the list 3. Press Media icon from left side of Radio screen 4. Launch USB Media source from MyDevice icon 5. Select List option and play a song from any library folder 6. Unplug and replug the antenna from System 7. Press Radio icon from left side of Media screen Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. Media screen shall be displayed. AM streaming shall be stopped 4. USB Media source shall be launched 5. Selected song shall be played 6. Antenna is plugged to System and ongoing USB playback is not interrupted 7. Previously tuned AM station shall be streamed Title: Last tuned FM station is streamed irrespective of signal strength Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active 6. USB device having valid audio files is connected to System Steps: 1. Select Browse option from FM Landing screen 2. Select any station from the list 3. Press Media icon from left side of Radio screen 4. Launch USB Media source from MyDevice icon 5. Select List option and play a song from any library folder 6. Unplug and replug the antenna from System 7. Press Radio icon from left side of Media screen Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. Media screen shall be displayed. FM streaming shall be stopped 4. USB Media source shall be launched 5. Selected song shall be played 6. Antenna is plugged to System and ongoing USB playback is not interrupted 7. Previously tuned FM station shall be streamed

On startup / the tuner data shall be retrieved from persistency and restored.

Title: Last tuned AM station information persistency during Ignition cycle Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active Steps: 1. Select Browse option from AM Landing screen 2. Select any station from the list 3. Perform Ignition cycle (Ignition OFF-> Ignition ON) 4. Press Radio button from control bar and launch AM source Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. System shall be turned ON after Ignition cycle 4. Radio application shall be displayed. Last tuned AM station information shall be displayed and station shall be streamed Title: AM Preset List persistency during Ignition cycle Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active 6. Few AM stations are added as presets Steps: 1. Select Browse option from AM Landing screen 2. Select a station from the list 3. Long press on any preset number from AM landing screen 4. Perform Ignition cycle (Ignition OFF-> Ignition ON) 5. Press Radio button from control bar and launch AM source 6. Observe Preset list Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. Currently tuned AM station shall be stored as a preset, to the pressed preset number 4. System shall be turned ON after Ignition cycle 5. Radio application shall be displayed 6. Preset list available before ignition cycle shall remain same Title: Last tuned FM station information persistency during Ignition cycle Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active Steps: 1. Select Browse option from FM Landing screen 2. Select any station from the list 3. Perform Ignition cycle (Ignition OFF-> Ignition ON) 4. Press Radio button from control bar and launch FM source Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. System shall be turned ON after Ignition cycle 4. Radio application shall be displayed. Last tuned FM station information (Station name, frequency and Radio Text if available) shall be displayed and station shall be streamed Title: FM Preset List persistency during Ignition cycle Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active 6. Few FM stations are added as presets Steps: 1. Select Browse option from FM Landing screen 2. Select a station from the list 3. Long press on any preset number from FM landing screen 4. Perform Ignition cycle (Ignition OFF-> Ignition ON) 5. Press Radio button from control bar and launch FM source 6. Observe Preset list Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. Currently tuned FM station shall be stored as a preset, to the pressed preset number 4. System shall be turned ON after Ignition cycle 5. Radio application shall be displayed 6. Preset list available before ignition cycle shall remain same

On station list update, the system shall search the entire DAB frequency range and all available multiplexes once except if NbMaxStationsInStationList is reached before.

Title: DAB background scan Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Multiple DAB modulators are connected with the system 5. Streaming files are set to stream within the frequency range of 174.928Mhz ~ 239.200Mhz 6. Station list count is less than 400 Steps: 1. Select the browse option from DAB landing screen 2. Start the streaming and select the Refresh button from the HMI. 3. Wait till station list update is completed Expected Result: 1. DAB station list screen shall be displayed 2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram 3. Station list update shall be completed and station list shall be updated with the station within the frequency 174.928Mhz ~ 239.200Mhz

On the first time DAB source activation, all presets shall be empty.

Title: By default all preset are empty for DAB band Preconditions: - System is up and running (ACC ON->IGN ON). - DAB antenna is plugged to tuner. - System is flashed using debugger. - Factory Data Reset is performed. Steps: 1. Launch DAB app for the first time. 2. Observe preset list. Expected Result: 1. DAB app opened successfully. 2. By default DAB preset list shall be empty.

On the first time DAB source activation, the station list shall be empty and remains empty until one of the following occurence:  1. User request for a station list manual update through HMI 2. System performs a background station list update

Title: Station List is empty after First start DAB activation Preconditions: - System is up and running. - DAB antenna is plugged to tuner. - Home screen is active. - CANoe is connected. Steps: 1. Flash the latest Software in the IVI system. 2. Reboot the System after the flashing. 3. Select Radio application and select DAB from band option. 4. Select Station List. Expected Result: 1. Software shall be flashed in IVI system. 2. Home screen shall be displayed. 3. DAB shall be selected. 4. Station list shall be empty. Title: Station list update - Background Scan Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. DAB Modulator 1 is available and connected to the system 5. DAB Modulator-2 is available and connected to the system 6. DAB to FM handover setting is set to 'OFF' 7. DAB landing screen is active Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen 3. Launch DAB source and select Browse option 4. Wait for the station list update Expected Result: 1. Factory Reset has been successfully performed 2. Radio application shall be launched 3. DAB Band shall be selected and Station list shall be empty during the first few seconds. 4. DAB station list shall be updated with all available stations (Stations from both modulator1 and modulator2) Title: Station list update - Manual Station Refresh Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. DAB Modulator 1 is available and connected to the system 5. DAB Modulator-2 is available and connected to the system 6. DAB to FM handover setting is set to 'ON' 7. DAB landing screen is active Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen 3. Launch DAB source and select Browse option 4. Press Refresh option available in DAB station list 5. Wait till station list update is completed Expected Result: 1. Factory Reset has been successfully performed 2. Radio application shall be launched 3. DAB Band shall be selected and Station list shall be empty during the first few seconds. 4. "Station list updating..." text shall be displayed 5. DAB station list shall be updated with all available stations (Stations from both modulator1 and modulator2)

On the first time DAB source activation, the system shall tune to the lowest ensemble in the frequency band available. Example- Channel 5A (174.928Mhz) service 0. Band III

Title: Default station during first time DAB source activation Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. No Modulators are connected to the system Steps: 1. Perform Factory Reset from Settings application 2. Select Radio application from Home screen 3. Press Band option and launch DAB source Expected Result: 1. Factory Reset has been successfully performed 2. Radio application shall be launched 3. DAB Band shall be selected and shall tuned to the lowest ensemble in the frequency - Channel 5A (174.928Mhz)

On traffic announcement (TA) end, the system shall restore the previous source in less than 250 ms. (KPI)

Title: USB audio playback resumes within 250ms after TA ends Preconditions: 1. Vehicle battery (Vbat) is ON. 2. Ignition = ON. 3. Home screen appear 4. FM/AM signal simulator is connected with IVI 5. USB is connected with system & audio playback is in progress 6. USB audio playback screen is active Steps: 1.Trigger TA from simulator 2. Wait till TA ends Expected Result: 1.1 USB audio playback should be pause & TA should be audible. 1.2 Radio service announcement pop up should be displayed on HMI 2. Radio service announcement pop up should be dismiss & USB audio playback should be resumed within 250ms Title: BT audio playback resumes within 250ms after TA ends Preconditions: 1. Vehicle battery (Vbat) is ON. 2. Ignition = ON. 3. Home screen appear 4. FM/AM signal simulator is connected with IVI 5. BT is connected with system & audio playback is in progress 6. BT audio playback screen is active Steps: 1.Trigger TA from simulator 2. Wait till TA ends Expected Result: 1.1 BT audio playback should be pause & TA should be audible. 1.2 Radio service announcement pop up should be displayed on HMI 2. Radio service announcement pop up should be dismiss & BT audio playback should be resumed within 250ms Title: iPod audio playback resumes within 250ms after TA ends Preconditions: 1. Vehicle battery (Vbat) is ON. 2. Ignition = ON. 3. Home screen appear 4. FM/AM signal simulator is connected with IVI 5. iPod is connected with system & audio playback is in progress 6. iPod audio playback screen is active Steps: 1.Trigger TA from simulator 2. Wait till TA ends Expected Result: 1.1 iPod audio playback should be pause & TA should be audible. 1.2 Radio service announcement pop up should be displayed on HMI 2. Radio service announcement pop up should be dismiss & iPod audio playback should be resumed within 250ms Title: Wireless AA audio playback resumes within 250ms after TA ends Preconditions: 1. Vehicle battery (Vbat) is ON. 2. Ignition = ON. 3. Home screen appear 4. FM/AM signal simulator is connected with IVI 5. Wired AA is connected with system & audio playback is in progress 6. Wired AA audio playback screen is active Steps: 1.Trigger TA from simulator 2. Wait till TA ends Expected Result: 1.1 Wireless AA audio playback should be pause & TA should be audible. 1.2 Radio service announcement pop up should be displayed on HMI 2. Radio service announcement pop up should be dismiss & Wired AA audio playback should be resumed within 250ms Title: Wireless CP audio playback resumes within 250ms after TA ends Preconditions: 1. Vehicle battery (Vbat) is ON. 2. Ignition = ON. 3. Home screen appear 4. FM/AM signal simulator is connected with IVI 5. Wireless CP is connected with system & audio playback is in progress 6. Wireless CP audio playback screen is active Steps: 1.Trigger TA from simulator 2. Wait till TA ends Expected Result: 1.1 Wireless CP audio playback should be pause & TA should be audible. 1.2 Radio service announcement pop up should be displayed on HMI 2. Radio service announcement pop up should be dismiss & Wireless CP audio playback should be resumed within 250ms Title: Wired AA audio playback resumes within 250ms after TA ends Preconditions: 1. Vehicle battery (Vbat) is ON. 2. Ignition = ON. 3. Home screen appear 4. FM/AM signal simulator is connected with IVI 5. Wired AA is connected with system & audio playback is in progress 6. Wired AA audio playback screen is active Steps: 1.Trigger TA from simulator 2. Wait till TA ends Expected Result: 1.1 Wired AA audio playback should be pause & TA should be audible. 1.2 Radio service announcement pop up should be displayed on HMI 2. Radio service announcement pop up should be dismiss & Wired AA audio playback should be resumed within 250ms Title: Wired CP audio playback resumes within 250ms after TA ends Preconditions: 1. Vehicle battery (Vbat) is ON. 2. Ignition = ON. 3. Home screen appear 4. FM/AM signal simulator is connected with IVI 5. Wired CP is connected with system & audio playback is in progress 6. Wired CP audio playback screen is active Steps: 1.Trigger PTY31 from simulator 2. Wait till TA ends Expected Result: 1.1 Wired CP audio playback should be pause & TA should be audible. 1.2 Radio service announcement pop up should be displayed on HMI 2. Radio service announcement pop up should be dismiss & Wired CP audio playback should be resumed within 250ms

Once the announcement is over, the system shall resume any lower priority source that was active when Service Announcement incame. See Feature Interation Matrix priority rules.

Title: DAB Interrupt - Service Announcement during USB Media playback Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5.USB having playable media files are connected with the system 6. Streaming file with DAB Interrupt - Service Announcement is streamed via modulator Steps: 1. Select Media icon from control bar and launch Radio from left side of Media screen 2. Launch DAB source from Band option 3. Select Browse option from DAB landing screen 4. Select any station from the list 5. Select Media icon from control bar 6. Launch USB media source from MyDevice icon 7. Select List option and play a song from any library 8. Wait for the service announcement from the DAB station and accept it 9. Cancel the service announcement from the system Expected Result: 1. Radio application shall be launched 2. DAB source shall be launched 3. DAB station list shall be displayed 4. Selected DAB station shall be played 5. Media application shall be launched 6. USB media source shall be launched 7. Selected song shall be played 8. USB media shall be paused and service announcement shall be played 9. USB media streaming shall be resumed Title: DAB Interrupt - Service Announcement during Radio DAB streaming Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. Streaming file with DAB Interrupt - Service Announcement is streamed via modulator Steps: 1. Select Media icon from control bar and launch Radio from left side of Media screen 2. Launch DAB source from Band option 3. Select Browse option from DAB landing screen 4. Select any station from the list 5. Wait for the service announcement from the DAB station and accept it 6. Wait for the service announcement to be ended Expected Result: 1. Radio application shall be launched 2. DAB source shall be launched 3. DAB station list shall be displayed 4. Selected DAB station shall be played 5. DAB service announcement shall be played and DAB station streaming shall be paused 6. DAB service announcement shall be ended and previously played DAB station shall be resumed

Once the frequency become a valid station / user shall be able to hear the audio of the tuned station.

Title: Audio availability for valid AM frequency Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active Steps: 1. Select Browse option from AM Landing screen 2. Select any station from the list 3. Unplug the antenna from System 4. Plug the antenna to System Expected Result: 1. AM station list shall be displayed 2. Selected AM station shall be played 3. AM streaming is interrupted and hiss sound shall be heard 4. Previously tuned AM station shall start streaming and able to hear streaming audio Title: Audio availability for valid FM frequency Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active Steps: 1. Select Browse option from FM Landing screen 2. Select any station from the list 3. Stop simulation from FM generator 4. Start simulation from FM generator Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played 3. FM streaming is interrupted and hiss sound shall be heard 4. Previously tuned FM station shall start streaming and able to hear streaming audio

PS name shall be provided immediately once it is available in the current tuned station information.

Title: PS Name displayed for currently tuned station Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active 6. Few FM stations with station name are available in station list Steps: 1. Select Browse option from FM Landing screen 2. Select a station, which have station name, from the list Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played and station name shall be displayed immediately on FM landing screen

Program service name (station name) / if available / shall be provided as a part of the current station information data.

Title: FM - Station name as part of current station information data Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active Steps: 1. Select Browse option from FM Landing screen 2. Select any station from the list Expected Result: 1. FM station list shall be displayed 2. Selected FM station shall be played and Station name shall be displayed as part of station information data

Radio text can be of maximum 64 characters.

Title: Maximum characters for Radio Text Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active 6. TRX011 is plugged with System and streaming is in progress from a valid station 7. Radio Text setting is set to ON Steps: 1. Set Radio Text of more than 64 characters for currently tuned station, on TRX011 Expected Result: 1. Radio Text with maximum 64 characters shall be displayed for currently tuned station in FM landing screen

Radio text if available / shall be provided as a part of current tuned station information data.

Title: Radio text displayed, when Radio Text is set to 'ON' Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active 6. TRX011 is plugged with System and streaming is in progress from a valid station 7. Radio text setting is set to ON Steps: 1. Set Radio Text for currently tuned station, on TRX011 Expected Result: 1. Radio Text shall be displayed for currently tuned station in FM landing screen Title: Radio text not displayed, when Radio Text is set to 'OFF' Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active 6. TRX011 is plugged with System and streaming is in progress from a valid station 7. Radio text setting is set to OFF Steps: 1. Set Radio Text for currently tuned station, on TRX011 Expected Result: 1. Radio Text shall not be displayed for currently tuned station in FM landing screen

Seek completion time for all tuner bands when no valid station is available shall not be more than 10 seconds.

Title: Seek next operation completed in 10 Seconds when No valid DAB stations are available. Preconditions: - System is up and running (ACC ON->IGN ON) - DAB screen is active. - DTU-215 plugged with freq 5A 174.928 MHz Steps: 1.Tune to 5A 174.928 MHz 2.Perform Auto Seek Next operation and Start Stopwatch. 3.Stop stopwatch once Auto seek is completed. Expected Result: 1.DAB station shall be tuned. 2.Seek next shall be performed. 3.Seek Next operation shall be completed within 10 Seconds. Title: Seek previous operation completed in 10 Seconds when No valid DAB stations are available. Preconditions: - System is up and running (ACC ON->IGN ON) - DAB screen is active. - DTU-215 plugged with freq 12A 223.936 MHz Steps: 1.Tune to 12A 223.936 MHz 2.Perform Auto Seek Previous operation and Start Stopwatch. 3.Stop stopwatch once Auto seek is completed. Expected Result: 1.DAB station shall be tuned 2.Seek previous shall be performed. 3.Seek Previous operation shall be completed in 10 Seconds. Title: Auto seek up completion time when no other valid AM stations are found Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress 6. Attenuator is plugged to System Steps: 1. Long press Seek_Next arrow from AM landing screen 2. Increase the Attenuator value to decrease signal quality and wait until Auto seek up operation is completed Expected Result: 1. Auto seek up shall start 2. Auto seek up is completed within 10 seconds, and last tuned AM station, where seek was initiated, shall be streamed Title: Auto seek down completion time when no other valid AM stations are found Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active and AM streaming is in progress 6. Attenuator is plugged to System Steps: 1. Long press Seek_Previous arrow from AM landing screen 2. Increase the Attenuator value to decrease signal quality and wait until Auto seek down operation is completed Expected Result: 1. Auto seek down shall start 2. Auto seek down is completed within 10 seconds, and last tuned AM station, where seek was initiated, shall be streamed Title: Auto seek up completion time when no other valid FM stations are found Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress 6. Attenuator is plugged to System Steps: 1. Long press Seek_Next arrow from FM landing screen 2. Increase the Attenuator value to decrease signal quality and wait until Auto seek up operation is completed Expected Result: 1. Auto seek up shall start 2. Auto seek up is completed within 10 seconds, and last tuned FM station, where seek was initiated, shall be streamed Title: Auto seek down completion time when no other valid FM stations are found Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active and FM streaming is in progress 6. Attenuator is plugged to System Steps: 1. Long press Seek_Previous arrow from FM landing screen 2. Increase the Attenuator value to decrease signal quality and wait until Auto seek down operation is completed Expected Result: 1. Auto seek down shall start 2. Auto seek down is completed within 10 seconds, and last tuned FM station, where seek was initiated, shall be streamed

Static and dynamic PS Name shall be supported.

Title: Static PS name for FM band Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active 6. TRX011 is plugged with System and streaming is in progress from a valid station Steps: 1. Set a Static PS name for currently tuned station, on TRX011 2. Select Browse option from FM Landing screen 3. Wait for few minutes Expected Result: 1. Station name shall display the set Static PS name from TRX011, in FM landing screen 2. Station name shall display the set Static PS name from TRX011, in station list 3. Static PS name shall remain same Title: Dynamic PS name for FM band Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active 6. TRX011 is plugged with System and streaming is in progress from a valid station Steps: 1. Set a Dynamic PS name for currently tuned station, on TRX011 and provide the time interval 2. Select Browse option from FM Landing screen 3. Wait for few minutes Expected Result: 1. Station name shall display the set Dynamic PS name from TRX011, in FM landing screen 2. Station name shall display the set Dynamic PS name from TRX011, in station list 3. PS name shall change after the time interval

Station List will search the entire frequency range and select the best NbMaxStationsInStationList stations based on signal quality

Title: Maximum AM stations listed during station list update Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. AM landing screen is active Steps: 1. Select Browse option from AM landing screen 2. Press Refresh option available in AM station list 3. Wait till station list update is completed Expected Result: 1. AM station list shall be displayed 2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram 3. Station list update shall be completed. Maximum AM stations listed shall be 100 Title: Maximum FM stations listed during station list update Preconditions: 1. Vehicle battery (Vbat) is ON 2. IGN is ON 3. System is in Full Run Mode 4. Radio antenna (AM_FM/DAB) is plugged to System 5. FM landing screen is active Steps: 1. Select Browse option from FM landing screen 2. Press Refresh option available in FM station list 3. Wait till station list update is completed Expected Result: 1. FM station list shall be displayed 2. "Station list updating..." text shall be displayed along with a Cancel button and Refresh pictogram 3. Station list update shall be completed. Maximum FM stations listed shall be 150