Datasets:
mteb
/
sts15-sts

Dataset card Viewer Files Community
1
split
stringclasses
1 value
sentence1
stringlengths
15
302
sentence2
stringlengths
16
275
score
float64
0
5
test
the battery is in an open path to the bulb .
the battery is in an open path
3.4
test
there will be a gap where the bulb holder is supposed to be
there is a gap in a circuit
2.6
test
bulbs b and c will still be on closed paths with the battery
bulbs b and c are still in closed paths with the battery
4.4
test
bulb a is on its own closed path and bulbs b and c are on the same closed path
there is a path containing a and a different path containing b and c
4.6
test
bulb a is connected to switch z
there is no path containing both switch y and bulb a
1
test
terminal 6 is connected to the posititve battery terminal .
terminal 6 and the positive terminal are connected
4.6
test
bulb had a short circuit
there is a complete circuit
1
test
battery will always have voltage .
a battery uses a chemical reaction to maintain different electrical states at the terminals
1.6
test
it turns off all the bulbs .
the open switch creates a gap
0.6
test
the voltage is 1.5 because thebulb terminal is connected to the battery terminal .
terminal 1 is connected to the negative battery terminal
1.4
test
because a and c are still in a closed circuit
bulbs a and c are in a closed path
4.4
test
the terminals are connedted to the negative terminal of the battery .
terminals 1 , 2 and 3 are connected to the negative battery terminal
3.2
test
because those terminals are connected to the positive terminal of the battery .
terminals 4 , 5 and 6 are connected to the positive battery terminal
2.4
test
bulb a was still in a closed path
bulb a is still contained in a closed path with the battery and switch x .
3.6
test
there is a gap in the connection .
there is no gap between the terminals
1
test
there is a closed path , with no lightbulb in the path
the battery is contained in a path in which there is no bulb
4.2
test
bulbs a and c are still contained in a closed path with the battery .
bulbs a and c are still in closed paths with the battery
4.8
test
terminal 1 is not connected to the positive battery terminal
terminal 1 and the positive terminal are not connected
4.9
test
the battery is contained in the circuit and the light bulb is not
the battery is contained in a path in which there is no bulb
4
test
the battery uses a chemical reaction to maintain the voltage ,
a battery uses a chemical reaction to maintain different electrical states at the terminals
3
test
terminal 4 , terminal 5 , and terminal 6 are connected to the positive terminal
terminals 4 , 5 and 6 are connected to the positive battery terminal
4.6
test
bulb b and c are contained in the same path with the battery .
b and c are in the same path with the battery
4.8
test
the negative batter terminal is seperated by a gap from terminal 4
terminal 4 is separated by a gap from the negative battery terminal
5
test
because the path between the battery and the light bulb is not closed
the path is not closed
4
test
that the terminals are not connected to each other .
the terminals are not connected
4
test
the batteries terminals are not connected
circuit 4 has no closed paths
0.6
test
because the path was closed
bulb a is still contained in a closed path with the battery .
1.4
test
the positive battery terminal is separated by a gap
terminal 1 and the positive terminal are separated by the gap
2.8
test
if a bulb is in a closed circuit with a battery and a switch the switch will affect the bulb .
when the switch and the bulb are contained in the same path
2.4
test
because there is not a closed circuit anymore for bulb c
bulb c was no longer in a closed path with the battery
3.4
test
terminal 5 is connected to teh positive battery terminal
terminal 5 and the positive terminal are connected
5
test
because the path is short
the path is not closed
1
test
the path it was on
there is a path containing both z and c
2.4
test
that the bulb terminal is only connected to one of the battery terminals
there is no gap between the terminals
1.4
test
bulbs a and c were still contained on closed paths with the batery
bulbs a and c are still contained in closed paths with the battery
4.6
test
terminal five is connected to the positive battery terminal .
terminal 5 and the positive terminal are connected
5
test
because there is no closed path to the battery
the path is not closed
3.2
test
terminal one is connected to the negative battery terminal
terminal 1 is connected to the negative battery terminal
5
test
when the switch is on a closed path with the bulb
when the switch and the bulb are contained in the same path
3.6
test
removing one bulb shuts off the other .
a and c are in the same closed path
1.8
test
bulb a is in a closed path with a battery
bulb a is still in a closed path with the battery
5
test
if the bulb and the switch are contained by a closed path then the switch affects the bulb .
when the switch and the bulb are contained in the same path
2.6
test
the bulb will not light
there is no gap between the terminals
1
test
if bulb b is damaged , then the circut is no longer closed .
there is no closed path
1.4
test
a damaged bulb creates a gap in the path .
a damaged bulb creates a gap
4.4
test
bulb c and switch z are in the same closed path
there is a path containing both z and c
4.4
test
a switch creates a break in the closed path .
the open switch creates a gap
3.8
test
because the battery has electricity and the gap does not
a battery uses a chemical reaction to maintain different electrical states at the terminals
2
test
it must be in a closed path .
the bulb and the battery are in a closed path
2.6
test
circuit 2 is not a short circuit because the battery is not connected to itself .
the battery in 2 is not in a closed path
2
test
bulbs a and b are still connected to the closed circuit containing the battery
if c burns out then a and b are still in a closed path with the battery
3
test
bulb a and c will still be contained in a closed path with the battery
bulbs a and c are still in closed paths with the battery
4.4
test
terminal is connected to the battery
terminals 1 , 2 and 3 are connected to the negative battery terminal
3
test
i think the red x means that this is dangerous and should never happen unless something is seriously wrong .
there is a short circuit
0
test
terminal 1is connected to terminal 4
terminals 1 and 4 are connected
5
test
terminal one is not connected to terminal six
terminals 1 and 6 are not connected
5
test
" if the switch is included in the bulb " " s closed path , then the switch being open will affect the bulb "
if a bulb and a switch are in the same path the switch affects the bulb
3.2
test
the path has to be closed for the bulb to light up
if a bulb and a switch are in the same path the switch affects the bulb
2
test
the positive battery was not connected to terminal one .
terminal 1 and the positive terminal are not connected
4.2
test
the circuit is not closed around the battery .
the battery in 2 is not in a closed path
2.8
test
because it can go through switch z
there is a path containing a , c , z and x
1.4
test
if the path is closed with the battery , the switch doesnt affect it
if a bulb and a switch are in the same path the switch affects the bulb
2
test
terminal 3 and the positie terminal are not connected .
terminal 3 and the positive terminal are not connected
5
test
because bulb c is not included in the closed path
there is a closed path with a and b that c is not in .
3.4
test
terminal 1 and the positive terminal had different electrical states .
terminal 1 and the positive terminal are separated by the gap
2.6
test
the gap in terminal 2 is postive
terminal 2 and the positive terminal are separated by the gap
3.6
test
bulbs a and c are in separate closed paths with the battery .
a and c are in different paths with the battery
3.6
test
bulb , battery , and switch are in closed path
when the switch and the bulb are contained in the same path
3.2
test
terminals 4 , 5 , and 6 are connected to the positive battery terminal
terminals 4 , 5 and 6 are connected to the positive battery terminal
5
test
terminal 5 and the positive battery terminal are in the same state .
terminal 5 and the positive terminal are connected
3.6
test
bulbs a and c are contained in different paths with the battery
a and c are in different paths with the battery
4.8
test
because the battery is not in a closed path .
the battery in 4 is not in a closed path
4
test
bulb a creates a gap
each bulb is in its own path
1.4
test
terminal 6 is connected to the positive battery terminal
terminal 6 and the positive terminal are connected
4.9
test
we can find the burnt out bulb by finding voltage between different terminals
measuring voltage indicates the place where the electrical state changes due to a damaged bulb .
3.4
test
the terminals are on the same side as the negative side of the battery .
terminals 1 , 2 and 3 are connected to the negative battery terminal
3.2
test
the positive battery terminal s separated by a gap from terminal 4
terminal 4 and the positive battery terminal are in the same electrical state
1.6
test
it creates a gap in the current .
the open switch creates a gap
3.4
test
a terminal is connected to the positive terminal of the battery
terminal 6 and the positive terminal are connected
3.2
test
there is not a complete path involving both battery terminals
there is no closed path containing the battery
3.6
test
both the light bulb and battery must be in a closed path .
the bulb and the battery are in a closed path
4.2
test
the two terminals are connected
terminal 6 and the positive terminal are connected
3.2
test
because bulb a was still in a closed path with the battery
bulb a was still contained in the same closed path with the battery .
4.4
test
because it has another closed path it can use
bulb a is still in a closed path with the battery
1.6
test
because a and b are in series and a and c are in parallel
if c burns out , then a and b are still in a closed path .
2.2
test
it receives current from switche z .
there is a path containing a , c , z and x
1.4
test
the positive batter terminal does not have a gap from terminal 4
terminal 4 and the positive terminal are not separated by the gap
4.8
test
bulbs a and c are not contained ina closed path
a and c are not in the same path
3.8
test
bulbs b and c are contained on the same path with the battery
b and c are in the same path with the battery
5
test
if x and z are closed then it will create a closed path
there is a path containing a , c , z and x
1.4
test
the terminal is connected to a negative terminal .
there is no gap between the terminals
1
test
b and c are not in the same circuit as a .
each bulb is in its own path
1
test
bulb b created a gap
terminal 4 and the positive battery terminal are in the same electrical state
0.4
test
bulbs b and c creat a gap in the path
bulb b is in a separate path
1.33
test
it is not in the same path with the bulb and battery
bulb a is still in a closed path with the battery
2.4
test
b and c will be in their own closed paths with the battery .
bulbs b and c are still in closed paths with the battery
4.4
test
if the switch is on and makes a gap between the bulb and the battery .
when the switch and the bulb are contained in the same path
1.2
test
y is not needed for bulb a to light
bulb a is still in a closed path with the battery
1.2
test
" because switch y isn " " t included in bulb a " " s closed path "
switch y and bulb a are not in the same closed path
4.8
test
when the switch is in the path of the bulb .
when the switch and the bulb are contained in the same path
4.8