input
stringlengths
129
2.65k
•Depress the brake pedal until the desired vehicle speed is reached and press the SET + control. Turning off speed control There are two ways to turn off the speed control:•Depress the brake pedal or the clutch pedal (if equipped). This will not erase your vehicle’spreviously set speed. •Press the speed control OFF control. Note: When you turn off the speed control or the ignition, your speedcontrol set speed memory is erased. STEERING WHEEL CONTROLS (IF EQUIPPED) Radio control featuresPress MEDIA to select:•AM, FM1, FM2, or CD •SAT1, SAT2 or SAT3 (Satellite Radio mode). •LINE IN (auxiliary input jack) In radio mode: •Press to access the next/previous preset station. In CD mode:•Press to listen to the next track on the disc. In satellite radio mode:•Press to advance through preset channels.Driver Controls 101 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
In any mode: •Press VOL + or VOL - to adjust the volume. SYNC/H23041 system hands free control features (if equipped) Press briefly to use the voice command feature. You will hear a tone and LISTENING will appear inthe radio display. Press and hold to exit voice command. Press to activate phone mode or answer a phone call. Press VOL + or − to adjust volume. Press and hold to end a call or exit phone mode. Press to scroll through various menus and selections. Press OK to confirm your selection. For further information on the SYNC /H23041system, refer to the SYNC/H23041 supplement. Navigation system/SYNC /H23041hands free control features (if equipped) Press control briefly until the voice icon appears on the Navigation display to use the voice command feature. Press to activate phone mode or answer a phone call. Press VOL + or − to adjust volume. Press and hold to exit phone mode or end a call.Driver Controls 102 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
For further information on the Navigation system/SYNC /H23041system, refer to theNavigation andSYNC/H23041 supplements. MOON ROOF (IF EQUIPPED) The moon roof control is located on the overhead console. WARNING: Do not let children play with the moon roof or leave children unattended in the vehicle. They may seriously hurt themselves. WARNING: When closing the moon roof, you should verify that it is free of obstructions and ensure that children and/or pets are not in the proximity of the moon roof opening. The moon roof is equipped with an automatic, one-touch, express opening and closing feature. To stop motion at any time during theone-touch operation, press the control a second time. To open the moon roof: Press and release the SLIDE control, the moon roof will open automatically. Pressthe switch again to stop the moonroof. To close the moon roof: Pull and release the SLIDE control, the moon roof will close automatically. Pressthe switch again to stop the moonroof. Bounce-back: When an obstacle has been detected in the moon roof opening as the moon roof is closing, the moon roof will automatically open and stop at a prescribed position. Bounce-back override: To override bounce-back function, pull and hold the SLIDE switch within two seconds of a bounce-back event. The closing force will begin to increase each time the moon roof is closed forthe first three closing cycles, with bounce-back active. For example:Bounce-back can be used to overcome the resistance of ice on the moonroof or seals To vent the moon roof: Press and release the TILT control, the moon roof will move to the vent position automatically from any moon roof position. Press the switch again to stop the moon roof. Pull and hold theTILT control to close the moon roof.Driver Controls 103 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
The moon roof has a built-in sliding shade that can be manually opened or closed when the glass panel is shut. To close the shade, pull it towardthe front of the vehicle. UNIVERSAL GARAGE DOOR OPENER (IF EQUIPPED) The appearance of your vehicle’s universal garage door opener will vary according to your option package. Before programing, make sure yourtransmitter matches the graphic in the procedure. HomeLink/H23041 Car2U/H23041 Home Automation System HomeLink/H23006 Wireless Control System (if equipped) The HomeLink/H23041 Wireless Control System, located on the driver’s visor, provides a convenient way toreplace up to three hand-heldtransmitters with a single built-indevice. This feature will learn theradio frequency codes of mosttransmitters to operate garagedoors, entry gate operators, security systems, entry door locks, andhome or office lighting. WARNING: When programming your HomeLink /H23041Wireless Control System to a garage door or gate, be sure that people and objects are out of the way to prevent potential injury or damage.Driver Controls 104 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Do not use the HomeLink /H23041Wireless Control System with any garage door opener that lacks safety stop and reverse features as required by U.S. federal safety standards (this includes any garage door openermodel manufactured before April 1, 1982). A garage door which cannotdetect an object, signaling the door to stop and reverse, does not meetcurrent U.S. federal safety standards. For more information, contactHomeLink/H23041 at:www.homelink.com or1–800–355–3515. Retain the original transmitter for use in other vehicles as well as for future programming procedures (i.e. new HomeLink /H23041equipped vehicle purchase). It is also suggested that upon the sale of the vehicle, theprogrammed Homelink /H23041buttons be erased for security purposes, refer to Programming in this section. Programming Do not program HomeLink /H23041with the vehicle parked in the garage. Note: Your vehicle may require the ignition switch to be turned to the accessory position for programming and/or operation of the HomeLink /H23041. It is also recommended that a new battery be placed in the hand-held transmitter of the device being programmed to HomeLink /H23041for quicker training and accurate transmission of the radio-frequency signal. 1. Position the end of your hand-held transmitter 1–3 inches(2–8 cm) away from the HomeLink /H23041 button you wish to program (locatedon your visor) while keeping theindicator light in view. 2. Simultaneously press and hold both the chosen HomeLink /H23041and hand-held transmitter buttons until the HomeLink /H23041indicator light changes from a slow to a rapidly blinking light. Now you may releaseboth the HomeLink/H23041 and hand-held transmitter buttons. Note: Some entry gates and garage door openers may require you to replace Step 2 with procedures noted in the Gate Operator and Canadian Programming in this section for Canadian residents. 3. Firmly press and hold for five seconds and release the programmed HomeLink /H23041button up to two separate times to activate the door. If the door does not activate, press and hold the just-trainedHomeLink/H23041 button and observe the indicator light. •If the indicator light stays on constantly, programming is complete and your device should activate when the HomeLink /H23041button is pressed and released.Driver Controls 105 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
•If the indicator light blinks rapidly for two seconds and then turns to a constant light continue with “Programming” Steps 4 through 6to complete programming of a rolling code equipped device (most commonly a garage door opener). 4. At the garage door opener receiver (motor-head unit) in the garage, locate the “learn” or “smart” button (usually near where the hangingantenna wire is attached to the unit). 5. Firmly press and release the “learn” or “smart” button. (The name and color of the button may vary by manufacturer.) Note: There are 30 seconds in which to initiate Step 6. 6. Return to the vehicle and firmly press, hold for two seconds and release the programmed HomeLink /H23041button. Repeat the press/hold/release sequence again and, depending on the brand of the garage door opener (or other rolling code equipped device), repeat this sequence a third time to complete the programming. HomeLink/H23041 should now activate your rolling code equipped device. To program additional HomeLink /H23041buttons begin with Step 1 in this section. For questions or comments, please contact HomeLink /H23041at www.homelink.com or1–800–355–3515. Gate Operator & Canadian ProgrammingDuring programming, your hand-held transmitter mayautomatically stop transmitting —not allowing enough time forHomeLink/H23041 to accept the signal from the hand-held transmitter. After completing Step 1 outlined in theProgramming section, replace Step 2 with the following: Note: If programming a garage door opener or gate operator, it is advised to unplug the device during the “cycling” process to prevent overheating. •Continue to press and hold the HomeLink /H23041button (note Step 2 in the Programming section) while you press and release — every two seconds (“cycle”) your hand-held transmitter until the frequency signal has been accepted by the HomeLink /H23041. The indicator light will flash slowly and then rapidly after HomeLink /H23041accepts the radio frequency signal. •Proceed with Step 3 in the Programming section.Driver Controls 106 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Operating the HomeLink /H23006Wireless Control System To operate, simply press and release the appropriate HomeLink /H23041button. Activation will now occur for thetrained product (garage door, gateoperator, security system, entrydoor lock, or home or office lightingetc.). For convenience, thehand-held transmitter of the devicemay also be used at any time. In the event that there are stillprogramming difficulties, contact HomeLink /H23041atwww.homelink.com or 1–800–355–3515. Erasing HomeLink/H23006 buttons To erase the three programmed buttons (individual buttons cannotbe erased): •Press and hold the two outer HomeLink/H23041 buttons until the indicator light begins to flash-after 20 seconds. Releaseboth buttons. Do not hold forlonger that 30 seconds. HomeLink/H23041 is now in the train (or learning) mode and can be programmed at any time beginning with Step 1 in the Programming section. Reprogramming a single HomeLink /H23006button To program a device to HomeLink /H23041using a HomeLink /H23041button previously trained, follow these steps: 1. Press and hold the desired HomeLink /H23041button. Do NOT release the button.2. The indicator light will begin to flash after 20 seconds. Without releasing the HomeLink /H23041button, follow Step 1 in the Programming section. For questions or comments, contact HomeLink /H23041atwww.homelink.com or1–800–355–3515.Driver Controls 107 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Car2U/H23006 Home Automation System (if equipped) The Car2U/H23041 Home Automation System is a universal transmitter located in the driver’s visor thatincludes two primary features – agarage door opener and a platformfor remote activation of deviceswithin the home. The Car2U /H23041 system’s garage door openerfunction replaces the common hand-held garage door opener with a three-button transmitter that isintegrated into the interior of your vehicle. After being programmed forgarage doors, the Car2U /H23041system transmitter can be programmed to operate security devices and home lighting systems. WARNING: Make sure that people and objects are clear of the garage door or security device you are programming. Do not program the Car2U /H23041system with the vehicle in the garage. Do not use the Car2U/H23041 system with any garage door opener that lacks safety stop and reverse features as required by U.S. Federal SafetyStandards (this includes any garage door opener manufactured beforeApril 1, 1982). Be sure to keep the original remote control transmitter for use in other vehicles as well as for future Car2U /H23041system programming. It is also recommended that upon the sale or lease termination of the vehicle, theprogrammed Car2U /H23041system buttons should be erased for security reasons. Refer to Erasing the Car2U/H23041 Home Automation System buttons later in this section. Read the instructions completely before attempting to program theCar2U/H23041 system. Because of the steps involved, it may be helpful to have another person assist you in programming the transmitter. Additional Car2U /H23041system information can be found on-line at www.learcar2U.com or by calling the toll-free Car2U /H23041system help line at 1-866-572-2728. Types of garage door openers (rolling code and fixed code) The Car2U/H23041 Home Automation System may be programmed to operate rolling code and fixed code garage door openers.•Rolling code garage door openers were produced after 1996 and are code protected. Rolling code means the coded signal is changed every time your remote control garage door opener is used.Driver Controls 108 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
•Fixed code garage door openers were produced prior to 1996. Fixed code uses the same coded signal every time. It is manually programmed by setting DIP switches for a unique personal code. If you do not know if your garagedoor opener is a rolling code orfixed code device, open your garagedoor opener’s remote control batterycover. If a panel of DIP switches ispresent your garage door opener isa fixed code device. If not, yourgarage door opener is a rolling codedevice. Rolling code programming Note: Programming the rolling code garage door opener involves time-sensitive actions. Read the entire procedure prior to beginning so you will know which actions are time-sensitive. If you do not follow thetime-sensitive actions, the device will time out and you will have torepeat the procedure. Note: Do not program the Car2U /H23041system with the vehicle in the garage. Make sure that your key is on and engine off while programming the transmitter. 1. Firmly press the two outer Car2U/H23041 system buttons for 1–2 seconds, then release.123456789101112 CTS 206-12 T124O NDriver Controls 109 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
2. Go to the garage to locate the garage door opener motor and its“learn” button. You may need aladder to reach the unit and youmay need to remove the unit’s coveror light lens to locate the “learn”button. Press the “learn” button,after which you will have10–30 seconds to return to yourvehicle and complete the followingsteps. If you cannot locate the “learn” button, refer to the Owner’s Guide of your garage door opener orcall the toll-free Car2U /H23041system help line at 1-866-57Car2U (1-866-572-2728). 3. Return to your vehicle. Press and hold the Car2U/H23041 system button you would like to use to control thegarage door. You may need to holdthe button from 5–20 seconds,during which time the selectedbutton indicator light will blinkslowly. Immediately (within 1 second) release the button once the garage door moves. When thebutton is released, the indicator light will begin to blink rapidly untilprogramming is complete. 4. Press and release the button again. The garage door should move, confirming that programming is successful. If your garage door does notoperate, repeat the previous steps in this section. After successful programming, you will be able to operate your Car2U /H23041 system by pressing the button you programmed to activate the opener. The indicator light above the selected button will turn on to confirm thatthe Car2U/H23041 system is responding to the button command. To program another rolling code device such as an additional garage dooropener, a security device or home lighting, repeat Steps 1 through 4substituting a different function button in Step 3 than what you used forthe garage door opener. For example, you could assign the left-mostbutton to the garage door, the center button to a security device, andthe right-most button to another garage door opener. Note: The Car2U/H23041 system allows for three devices to be programmed. If you need to change or replace any of the three devices after it has been initially programmed, it is necessary to erase the current settings usingDriver Controls 110 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
theErasing the Car2U/H23041 Home Automation System buttons procedure and then programming all of the devices being used. Fixed code programming Note: Do not program the Car2U /H23041system with the vehicle in the garage. Make sure that your key is on and engine off while programming the transmitter. 1. To program units with fixed code DIP switches, you will need the garage door hand-held transmitter, paper and a pen or pencil. 2. Open the battery cover and record the switch settings from left to right for all 8 to 12 switches. Use the figure below: When a switch is in the up, on, or + position, circle “L.”When a switch is in the middle, neutral, or 0 position, circle “M.” When a switch is in the down, off, or – position, circle “R.” Switch position 12345678 91 0 1 1 1 2 U p , o n o r + LLLLLLL LLLLL Middle, neutral or 0 MMMMMMM MMMMM Down, off or – RRRRRRR RRRRR L=left; M=middle; R=right 3. To input these positions into the Car2U/H23041 system, simultaneously press all three Car2U /H23041system buttons for a few seconds and thenrelease to put the device intoprogramming mode. The indicatorlights will blink slowly. Within2.5 minutes enter yourcorresponding DIP switch settingsfrom left to right into your Car2U /H23041system by pressing and releasing the buttons corresponding to the settings you circled.Driver Controls 111 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
4. After inputting switch settings, simultaneously press and release all three Car2U/H23041 system buttons. The indicator lights will turn on. 5. Press and hold the Car2U /H23041 system button you would like to useto control the garage door.Immediately (within 1 second)release the button once the garagedoor moves. During this time theselected button indicator light willblink slowly. Do not release thebutton until you see the garage door move. Most garage doors openquickly. You may need to hold the button from 5–55 seconds beforeobserving movement of the garage door. 6. The indicator light will (begin to) blink rapidly until programming is complete. If your garage door opener does not operate following thesesteps, repeat Steps 2 through 6. Otherwise, call the toll-free Car2U /H23041help line at 1-866-57Car2U (1-866-572-2728). After successful programming, you will be able to operate your Car2U /H23041 system by pressing the button you programmed to activate the opener. The indicator light above the selected button will turn on to confirm thatthe Car2U/H23041 system is responding to the button command. Erasing the Car2U/H23006 Home Automation System buttons Note: The system allows for three devices to be programmed. If you need to change or replace any of the three devices after it has beeninitially programmed, it will be necessary to erase the current settingsusing the procedure below and then reprogramming all of the devicesbeing used.Driver Controls 112 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
To erase programming on the Car2U /H23041system (individual buttons cannot be erased), use the following procedure: 1. Firmly press the two outside Car2U/H23041 system buttons simultaneously for approximately20 seconds until the indicator lightsbegin to blink rapidly. The indicatorlights are located directly above thebuttons. 2. Once the indicator lights begin to blink, release your fingers from thebuttons. The codes for all buttonsare erased. If you sell your vehicle equipped with the Car2U /H23041system, it is recommended that you erase the programming for security reasons. FCC and RSS-210 Industry Canada Compliance The Car2U/H23041 system complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)This device must accept any interference received including interferencethat may cause undesired operation. Changes and modifications to the Car2U /H23041system transmitter by other than an authorized service facility could void authorization to use the equipment. TAILGATE LOCK Your vehicle may be equipped with a tailgate lock designed to helpprevent theft of the tailgate. •Insert ignition key and turn to the right to engage lock. •Turn ignition key to the left to unlock.Driver Controls 113 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Tailgate removal Your tailgate is removable to allow more room for loading. WARNING: Always properly secure cargo to prevent shifting cargo or cargo falling from vehicle, which could result in compromised vehicle stability and serious personal injury to vehicle occupants or others. Note: If equipped with a rearview camera system, do Steps 1 through 3 before removing the tailgate. 1. Before removal of the tailgate, locate and disconnect the tailgatein-line connector under the pickupbox on the passenger side of thevehicle near the spare tire. 2. Install a protective cap (located in the glove box) onto the in-linerearview camera system connectorthat remains under the pickup box. 3. Partially lower tailgate and carefully feed tailgate harness up through the gap between the pickupbox and the bumper. Place the tailgate harness out of the way under thepickup box. 4. Lower the tailgate.5. Using a screwdriver, gently pry the spring clip (on each connector)past the head of the support screw.Disconnect cable. 6. Disconnect the other cable.7. Lift tailgate to a 45-degree angle from horizontal. 8. Lift right side off of its hinge.9. Lift tailgate to a 80-degree angle from horizontal.10. Remove tailgate from left side hinge by sliding tailgate to the right.To install, follow the removal procedures in reverse order. Driver Controls 114 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Tailgate step (if equipped) Your vehicle may be equipped with a feature that allows easier entry into the truck bed. To open the tailgate step: 1. Flip down the tailgate.2. Pull the yellow latch lever to the unlock position ( ) to release the grab handle from its stowed position and raise the handle upright untilyou feel it latch and see the latch lever in the lock position ( ). The yellow lever only needs to be used when releasing the grab handle. 3. Rotate the center molding to unlatch the tailgate step and pull ittowards you to extend it. 4. Flip open the step panel to widen the step. Note: To reduce risk of falling: •Operate step only when the vehicle is on level surface. •Operate step only in areas with sufficient lighting. •Always open flip panel to widen step. •Always use grab handle when stepping up and down. •Step not intended for bare-footed use. •Keep step clean from contamination before use (e.g. snow, mud) •Keep the step load (you + load) below 350 lb (159 kg). •Never drive with step deployed. To close the tailgate step:1. Close the step panel, then lift and fully close the tailgate step into the tailgate. 2. Slide the latch at the bottom of the handle, then lower the handle.Driver Controls 115 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Note: •Fully close and latch the tailgate step before moving the vehicle. •Never drive with the step or grab handle deployed. •Replace slip resistance tape (serviceable item) if worn out. •Replace handle molding (serviceable item) if damaged. •Do not tow with grab handle or step frame. Box side step (if equipped)Your vehicle may be equipped with a box side step that allows easier access to the truck bed. Note: Do not drive vehicle with box side step(s) in the deployed position.Note: The box side step load carrying capability (1 person + cargo) is 500 lb (227 kg). Do not exceed 500 lb (227 kg). To deploy the box side step, with your foot, push down on the button. The step will automatically extend out from the stowed position. Note: The box side steps may operate slower in cooler temperatures. In adverse conditions, debris such as mud, dirt, snow, ice, and salt may become trapped in the box side step mechanism, possibly causing thebox side step to not deploy automatically after pressing the button. Ifthis occurs, ensure that the button is pressed down, carefully manuallypull out the box side step, wash off the debris with a high-pressure carwash wand, and re-stow the step.Driver Controls 116 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
To stow the box side step, with your foot, push the box side step under the truck until fully latched. Do not push on the button while stowingthe box side step. Note: Do not use the box side steps to lift the vehicle when jacking. Utilize proper jacking points. Refer to Changing the tires in the Roadside Emergencies chapter. BED EXTENDER (IF EQUIPPED)Your vehicle may be equipped with a cargo management feature in the truck bed. Note: This feature is not intended for off-road usage. To open the bed extender into tailgate mode: 1. Pull the locking pin toward the center of the vehicle.Driver Controls 117 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
2. Open the latches to release the panels. 3. Rotate the panels toward the tailgate. Repeat Steps 1–3 for the other side of the bed extender. 4. Connect the two panels, then rotate both knobs a quarter-turn clockwise to secure the panels.Driver Controls 118 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
5. Ensure the latch rod is inserted into the tailgate hole and the lockingpins on both sides are engaged intotheir holes in the pick-up box. 6. Reverse steps for storage of the bed extender. Note: When the vehicle is in motion, ensure the locking pins and knobs are fully engaged. Note: Ensure all cargo is secured. Note: When the vehicle is in motion, the tailgate load must not exceed 150 lb (68 kg).Note: The bed extender should always be kept in the grocery mode or stowed position with the tailgate closed when not being used for the purpose of restraining cargo in the tailgate mode. To open the bed extender into grocery mode, follow Steps 1–4 by rotating the panels away from the tailgate. Close the tailgate.Driver Controls 119 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
CARGO MANAGEMENT SYSTEM (IF EQUIPPED) The cargo management system consists of the Cargo rail package with the following as optional accessories: •Front header bar (if equipped) •Cross bars (if equipped) •Bed divider (if equipped) •Side mounted tool bins (if equipped) Cargo rail package: The strong extruded aluminum double channel rails and four adjustable cleats are designed to hold loads up to 600 lb (272 kg) per cleat (maximum of two cleats per rail). •Cleat positions are adjusted by pulling the knob and turning slightly to lock open. The cleat can then be moved along the rail. Once the desired position is reached, return the knob to the horizontal position.Pull the cleat side-to-side to ensure it has locked into the nextavailable hole location. •To remove cleat from rail, pull the knob and turn slightly to lock open and slide it off the end of the rail. When installing cleat, reverse instructions above.Driver Controls 120 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Note: When replacing a cleat into the rail, make sure the oval embossed on the knob is not upside down. This will ensure that the cleat is properly oriented to accept accessory attachments. Front header bar: Spans the header area of the pickup box, providing the function of a header rail. •Attachment cleats from side rails or other attachments may be positioned in the front header bar to secure loads up to 600 lb (272 kg) per cleat (maximum of two cleats). •Cleats and other attachments may be inserted through the access window located in the center of the header bar. These items can thenbe slid to either side, and secured the same way as the side rails.Driver Controls 121 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Cross bars: Aluminum cross bars with T-slot channels in all four sides, and a latch mechanism that allows the end supports to snap over the existing cleats. Cross bars are rated to hold loads up to 100 lb (45 kg)load evenly distributed between the two crossbars, and the T-slots aresized to accept industry-standard roof rack accessories. •To remove cross bar, lift handle on each side and lift end support shroud off of the cleat. •To install cross bar, align cleats directly across from each other on the same rail (upper or lower). Then place crossbar end support onto cleat and press down on each side until the latch handle cycles up andthen press the handle down to secure (pull up on the bars to ensurethey are securely attached). •To install accessories into T-slots, remove cross bar and turn upside down, then find the slip joint end, indicated with an arrow embossedon the bottom of the support. Using a T25 Torx driver, remove twoTorx head bolts from bottom, and slide end support off of aluminumextrusion. Insert accessory into desired T-slot, and install end support.When tightening Torx head bolts, hand tightening with a Torx driver issufficient, DO NOT over torque by using a ratchet.Driver Controls 122 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Bed divider: This panel will keep small items up to 400 lb (180 kg) in position in the pickup box. Also includes T-slots to allow attachment of industry-standard roof rack accessories. •To remove bed divider, lift handle on each side and lift end support shroud off of the cleat. •To install bed divider, align cleats directly across from each other on the lower rail. Then place divider end support onto the cleats and press down on each side until the latch handle cycles up then pressthe handle down to secure (pull up on the divider to ensure they aresecurely attached). •To install accessories into T-slots, remove bed divider, then find the slip joint end, indicated with an arrow embossed on the support. Usinga T25 Torx driver, remove two Torx head bolts and slide end supportoff of the aluminum extrusion. Insert accessory into desired T-slot andinstall end support. When tightening Torx head bolts, hand tighteningwith a Torx driver is sufficient, DO NOT over torque by using aratchet.Driver Controls 123 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Side mounted tool bins: Watertight bins can be positioned at any point along the side rails and can be easily removed (even when full), and carried to wherever the contents are needed. Each bin will hold up to60 lb (27 kg) of cargo, and has a drain plug for use as a cooler. Note: When multiple bins are placed on one side of the pickup box, the totalcargo weight in all bins on that side of the pickup box cannot exceed60 lb (27 kg). •To access the lock, pull the tab at the base of the rubber cap to uncover the lock. When you are done with the lock always reinstall the rubber cap on the lock to ensure proper sealing. When the bin isunlocked the rubber cap does not need to be removed to open thebin, just press the rubber cap to unlatch the lid. •The lock cylinder is keyed to the first ignition key to be turned in the lock. This allows one key to work all bins, even if more are orderedthrough the dealer. The dealer will usually key the locks duringpre-delivery, but if necessary, simply remove the sticker covering thekeyhole, insert ignition key and turn to the extent of travel in eachdirection. This key will then be the only key to unlock the bin. •Once the key has been set, simply turn the key to the right to lock, or to the left to unlock. When locked, the push-button will not depresswhen pushed.Driver Controls 124 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
•To remove the bin from the rail, open lid and pull up on both levers located on the outboard edge (next to the pickup box top rail) until the handles are all the way up (approximately 90 degrees). Once bothhandles are raised, the lid may be closed. Note: Windows in the lid will allow the handles to stick up above the lid (with the lid closed).After closing the lid, simply lift up and inboard away from the pickupbox side to release bin from rail. •To install, reverse the above instructions. Note: Remove the bins during severe off-road driving to avoid damage to the cargo bins and pickup box. WARNING: If any levers are visible above the lid of the bin, the bin is not securely attached to the rail, and may become detached from the vehicle if driven in that configuration.Driver Controls 125 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
KEYS The key operates all locks on your vehicle. In case of loss, replacement keys are available from your dealer. You should always carry a second key with you in a safe place in case you require it in an emergency. Refer to the SecuriLock/H23041 passive anti-theft system section in this chapter for more information. MYKEY™ (IF EQUIPPED) The MyKey™ feature allows you to program a restricted driving mode to promote good driving habits. All but one of the keys programmed to thevehicle can be activated as a MyKey™. The key will remain restricteduntil MyKey™ is cleared. Any remaining keys are referred to as an“administrator key” or admin key. The admin key can be used to create aMyKey™, program optional MyKey™ settings, and clear the MyKey™feature. When the MyKey™ feature is enabled the user can use systemcheck in the message center to see how many MyKeys™ and admin keysare programmed to the vehicle, and how many total miles have beendriven with the MyKey™ active. MyKey™ restricted featuresStandard settings – These settings cannot be changed•The audio system will be muted whenever Belt-Minder /H23041is activated until the safety belts are buckled. Refer to the Seating and Safety Restraints chapter for a detailed description of Belt-Minder /H23041 operation. •Low fuel warnings are displayed in the message center followed by a chime when the distance to empty value reaches 75 miles (120 km). •The reverse sensing system cannot be turned off. Optional settings – These settings can be changed•Vehicle speed is limited to 80 mph (130 km/h). Visual warnings are displayed followed by a chime when the vehicle speed has reached 80 mph (130 km/h). •Visual warnings are displayed followed by a chime when a preselected vehicle speed of 45, 55 or 65 mph (75, 90, or 105 km/h) is exceeded. •The maximum volume of the audio system is limited to 45%. MYKEY VOLUME LIMITED will be displayed in the radio or (if equipped)navigation screen when attempting to exceed the limited volume.Locks and Security 126 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
•The AdvanceTrac /H23041system cannot be turned off. When this optional setting is on, the MyKey™ user will not be able to deactivate the system. Note: It may be beneficial to deactivate the AdvanceTrac /H23041 system if the vehicle is stuck in snow, mud, or sand. Create a MyKey™ To program MyKey™ on one of the keys programmed to the vehicle, insert the key that you want to make a MyKey™ into the ignition. Turnthe ignition on. Use the message center buttons or the select/reset stemto do the following: 1. Press SETUP or select/reset stem until PRESS RESET TO CREATE MYKEY is displayed. 2. Press and release the RESET button, or press and hold the select/reset stem until HOLD RESET TO CONFIRM MYKEY will bedisplayed. 3. Press and hold the RESET button or select/reset stem for two seconds until MARK THIS AS RESTRICTED is displayed. 4. Wait until KEY RESTRICTED AT NEXT START is displayed.MyKey™ is successfully programmed. Make sure you label it so you can distinguish it from the admin keys. Note: To program the optional settings go to Step 2 in the Programming MyKey™ optional settings section. If your vehicle is equipped with remote start, see the Using MyKey™ with Remote Start Systems section. Note: The MyKey™ can be cleared within the same key cycle that it was created, otherwise a standard key (administrator key) is required toclear the MyKey™ programming. To clear all MyKeys™ go to Step 2 intheClear MyKey™ section. Programming MyKey™ optional settings Turn the ignition on using an admin key. To program the optional settings, use the message center buttons to do the following: 1. Press SETUP or select/reset stem until RESET FOR MYKEY SETTINGS is displayed. 2. Press and release the RESET button or select/reset stem to display MyKey™ setup menus. The first menu shown is: MYKEY MAX MPH <80 MPH> OFFLocks and Security 127 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
3. If you don’t want to change the maximum speed setting, press the SETUP button or select/reset stem to display the next menu. Theremaining menus appear as follows with the default settings shown: MYKEY MPH TONES 45 55 65 <OFF>MYKEY VOLUME LIMIT <ON> OFFMYKEY ADVTRAC CTRL ON <OFF>. 4. On any of the menus press RESET or press and hold the select/resetstem to highlight your choice with the <…>. 5. Press SETUP or select/reset stem to enter your choice. The next optional setting will be displayed. 6. Repeat Steps 4 and 5 until you are done changing the optional settings. Clear MyKey™To reset all MyKeys™ as admin keys do the following:1. Turn the vehicle on using the admin key.2. Press SETUP or select/reset stem until PRESS RESET TO CLEAR MYKEY is displayed. 3. Press and release the RESET button or press and hold the select/reset stem until HOLD RESET TO CONFIRM CLEAR is displayed. 4. Press and hold the RESET button or select/reset stem until ALL MYKEYS CLEARED is displayed. Check MyKey™ system statusThe vehicle system check will provide the status of the following MyKey™ parameters: •MYKEY MILES — This odometer only tracks mileage when a MyKey™ is used. If mileage does not accumulate as expected, then the MyKey™ is not being used by the intended user. The only way toreset this odometer to zero is by clearing MyKey™. If this odometer islower than the last time you checked, then the MyKey™ system hasbeen recently cleared. •# MYKEY(S) PROGRAMMED — Indicates how many MyKeys™ are programmed to the vehicle. Can be used to detect deletion of aMyKey™. •# ADMIN KEYS PROGRAMMED — Indicates how many admin keys are programmed to the vehicle. Can be used to detect if an additionalspare key has been programmed to the vehicle Refer to Message center in the Instrument Cluster chapter for MyKey™ system warnings displays.Locks and Security 128 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Using MyKey™ with remote start systems MyKey™ is not compatible with non-Ford approved aftermarket remote start systems. If you choose to install a remote start system please seeyour authorized dealer for a Ford approved remote start system. When using a Ford-approved remote start system, the default settings will recognize the remote start system as an additional admin key withits associated privileges. You should program the remote start system asa MyKey™ in addition to the key that you have already programmed as aMyKey™. To program the remote start system as MyKey™, do thefollowing: 1. Enter the vehicle and close all doors.2. Remote start the vehicle using a remote start fob.3. Follow Steps 1-4 in the Create a MyKey™ section. Note: For all vehicles, the number of MYKEY(S) PROGRAMMED or ADMIN KEYS PROGRAMMED that is displayed in the MyKey™ system status menus will include the remote start system as an additional key inthe total count. See the Check MyKey™ system status section. Note: For all vehicles with remote start installed, it is possible to program all original vehicle keys as MyKeys™, in which case, you willneed to use your remote start system to reset all MyKeys™ as adminkeys by doing the following: 1. Enter the vehicle, close all doors.2. Remote start the vehicle using your remote start fob.3. Follow Steps 1-4 in the Clear MyKey™ section.Locks and Security 129 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Troubleshooting Condition Potential Causes Can’t create a MyKey™ •Key in the ignition is already a MyKey™ •Key in the ignition is the last remaining admin key (there alwayshas to be at least one admin key)•SecuriLock /H23041passive anti-theft system is disabled or in unlimitedmode•Vehicle has been started using a remote start system that isprogrammed as MyKey™. Refer toUsing MyKey™ with remote startsystems section. Cannot program the MyKey™optional settings•Key in the ignition is a MyKey™ •No MyKeys™ are programmed to the vehicle. Refer to Create a MyKey™ section •Vehicle has been started using a remote start system that isprogrammed as MyKey™. Refer toUsing MyKey™ with remote startsystems section. Cannot clear MyKey™ •Key in the ignition is a MyKey™ •No MyKeys™ are programmed to the vehicle. Refer to Create a MyKey™ section •Vehicle has been started using a remote start system that isprogrammed as MyKey™. Refer toUsing MyKey™ with remote startsystems section. Lost the only admin key •Purchase a new key from your authorized dealerLocks and Security 130 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Condition Potential Causes Lost any key •For programming spare keys, refer to the Programming spare keys section in this chapter. I accidentally programmed all keys as MyKeys™•Vehicle has a remote start system that is recognized as an admin key.Refer to the Using MyKey™ with remote start systems section to reset all MyKeys™ as admin keys. MyKey™ Programmed totalincludes one additional key•Unknown key has been programmed to the vehicle as a MyKey™.•Vehicle is equipped with a remote start system. Refer to Using MyKey™ with remote start systems section. Admin Keys Programmed totalincludes one additional key•Unknown key has been programmed to the vehicle as admin key.•Vehicle is equipped with a remote start system. Refer to Using MyKey™ with remote start systems section. MyKey™ miles do notaccumulate•MyKey™ is not being used by the intended user.•MyKey™ system has been recently cleared.Locks and Security 131 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
POWER DOOR LOCKS (IF EQUIPPED) Press control to unlock all doors. Press control to lock all doors. Smart unlocking feature The smart unlocking feature helps prevent you from locking yourself out of your vehicle. With the key in any ignition position:•The driver’s door will automatically unlock if it is locked by the driver’s power lock control while the driver’s door is open. The vehicle may still be locked with the key in the ignition, and performing one of the following actions: •Pressing the manual lock button on the door. •Operating the remote entry transmitter. •Operating the keyless entry keypad. •Operating the driver’s door with a key will only lock the driver’s door. AutolockThe autolock feature is available on vehicles with power locking. This feature will lock all the doors when: •all the doors are closed, •the ignition is in the on position, •you shift into any gear putting the vehicle in motion, (for manual transmission the park brake should not be engaged) and •the vehicle attains a speed greater than 12 mph (20 km/h).Locks and Security 132 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
The autolock feature repeats when: •any door is opened then closed while the ignition is in the on position and the vehicle speed is 9 mph (15 km/h) or lower and •the vehicle attains a speed greater than 12 mph (20 km/h). Deactivating/activating autolockYour vehicle comes with the autolock feature enabled. There are four methods to enable/disable this feature: •Through your authorized dealer, or •Performing the power door lock control procedure, •Performing the keyless entry keypad (if equipped) procedure, or •Performing the message center (if equipped) procedure. Power door unlock/lock procedureBefore starting, ensure the ignition is in the off position and all vehicle doors are closed. You must complete Steps 1-5 within 30 seconds or theprocedure will have to be repeated. If the procedure needs to berepeated, you must wait 30 seconds. Note: All doors must be closed and remain closed throughout the configuration process. 1. Turn the ignition to the on position. 2. Press the power door unlock control three times. 3. Turn the ignition from the on to the off position. 4. Press the power door unlock control three times. 5. Turn the ignition back to the on position. The horn will chirp.6. Press the unlock control, then press the lock control. The horn will chirp once if autolock was deactivated or twice (one short and one longchirp) if autolock was activated. 7. Turn the ignition to the off position. The horn will chirp once to confirm the procedure is complete.Locks and Security 133 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Keyless entry keypad procedure 1. Turn the ignition to the off position.2. Close all doors3. Enter 5–digit entry code4. Press and hold the 3 •4. While holding the 3 •4p r e s st h e7• 8. 5. Release the 7 •8. 6. Release the 3 •4. The user should receive a horn chirp to indicate the system has been disabled or a chirp followed by a honk to indicate the system has been enabled. Message center procedure For information on activating/deactivating the autolock feature using the vehicle’s message center, refer to Message center information in the Instrument cluster chapter. Autounlock feature The autounlock feature will unlock all the doors when:•the ignition is in the on position, all the doors are closed, and the vehicle has been in motion at a speed greater than 12 mph (20 km/h); •the vehicle has then come to a stop and the ignition is turned to the off or accessory position; and •the driver door is opened within 10 minutes of the ignition being transitioned to the off or accessory position. Note: The doors will not autounlock if the vehicle has been electronically locked before the driver door is opened. Deactivating/activating autounlock feature Your vehicle comes with the autounlock features activated; there are four methods to enable/disable this feature: •Through your authorized dealer, •by using a power door unlock/lock sequence, •using a keypad procedure (if equipped), or •or by using the instrument cluster message center (if equipped). Refer toMessage center in the Instrument ClusterDriver Controls chapter. Note: The autounlock feature can be activated/deactivated independently of the autolock feature.Locks and Security 134 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Power door lock switch autounlock enable/disable procedure Before starting, ensure the ignition is in the off position and all vehicle doors are closed. You must complete Steps 1–5 within 30 seconds or theprocedure will have to be repeated. If the procedure needs to berepeated, wait a minimum of 30 seconds before beginning again. 1. Place the key in the ignition and turn the ignition to the on position. 2. Press the power door unlock control three times. 3. Turn the ignition from the on position to the off position. 4. Press the power door unlock control three times. 5. Turn the ignition back to the on position. The horn will chirp one time to confirm programming mode has been entered and is active. 6. To enable/disable the autounlock feature, press the lock control, then press the unlock control. The horn will chirp once if autounlock wasdeactivated or twice (one short and one long chirp) if autounlock wasactivated. 7. Turn the ignition to the off position. The horn will chirp once to confirm the procedure is complete. Keyless entry keypad autounlock enable/disable procedure 1. Turn the ignition to the off position.2. Close all the doors.3. Enter factory–set 5–digit entry code.4. Press and hold the 3 •4. While holding the 3 •4, press and release the 7 •8. While still holding the 3 •4, press and release the 7 •8a second time.5. Release the 3 •4. The user should receive a horn chirp to indicate the system has been disabled or a chirp followed by a honk to indicate the system has been enabled. Message center procedure For information on activating/deactivating the autolock feature using the vehicle’s message center, refer to Message center information in the Instrument cluster chapter.Locks and Security 135 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
CHILDPROOF DOOR LOCKS (ON VEHICLES WITH REAR DOORS) •When these locks are set, the rear doors cannot be opened from the inside. •The rear doors can be opened from the outside when thechildproof door locks are set, butthe doors are unlocked. The childproof locks are located onthe rear edge of each rear door andmust be set separately for eachdoor. Setting the lock for one doorwill not automatically set the lockfor both doors. •Insert the key and turn to the lock position (key horizontal) to engage the childproof locks. •Insert the key and turn to the unlock position (key vertical) to disengage the childproof locks. REMOTE ENTRY SYSTEM (IF EQUIPPED) This device complies with part 15 of the FCC rules and with RS-210 of Industry Canada. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This devicemust accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority tooperate the equipment. The typical operating range for your remote entry transmitter is approximately 33 feet (10 meters). A decrease in operating range couldbe caused by: •weather conditions, •nearby radio towers, •structures around the vehicle, or •other vehicles parked next to your vehicle.Locks and Security 136 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Your vehicle is equipped with a remote entry system which allows you to: •unlock the vehicle doors without a key. •lock all the vehicle doors without a key. •activate the personal alarm. If there are problems with the remote entry system, make sure totake ALL remote entry transmitters with you to your authorized dealer in order to aid in troubleshooting the problem. Two step door unlocking 1. Press and release to unlock the driver’s door. Note: The interior lamps parking lamps will illuminate. 2. Press and release again within three seconds to unlock the passenger doors and the rear doors. The battery saver feature will turn off the lamps 10 minutes after the ignition is turned to the off position. One step door unlocking If the one step door unlocking feature is activated, press and release once to unlock the passenger doors and the rear doors. Note: The parking lamps and interior lamps will illuminate (refer to the Illuminated entry feature later in this section), if the control on the overhead lamp is not set to the offposition. Switching from two step to one step door unlocking Your vehicle comes with two step unlocking enabled. Unlocking can be switched between two step and one step door unlocking by pressing and holding both the and buttons simultaneously on the remote entry transmitter for approximately four seconds and release. The lamps will flash twice to indicate that the vehicle has switched to one stepunlocking. Repeat the procedure to switch back to two-step unlocking. Locking the doors 1. Press and release to lock all the doors. The parking lamps will illuminate.Locks and Security 137 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
2. Press and release again within three seconds to confirm that all the doors are closed and locked. Note: The doors will lock again, the horn will chirp once, and the turn lamps will illuminate if all the doors are closed.. If any of the doors are not properly closed the horn will make two quick chirps and the lamps will not illuminate. Car finder Press twice within three seconds. The horn will chirp and the turn lamps will flash. It is recommended that this method be used to locate your vehicle, rather than using the panic alarm. Sounding a panic alarm Press to activate the alarm. Press again or turn the ignition to accessory or on to deactivate. Note: The panic alarm will only operate when the ignition is in the off position. Memory feature (seat, mirrors, adjustable pedals and steering column) (if equipped) The Integrated Keyhead Transmitter (IKT) allows you to recall the memory seat/power mirrors/adjustable pedals/steering column feature. Press to automatically move the seat, power mirrors, adjustable pedals and steering column to the desired memory position. The mirrors will move to the programmed position and the seat will move to the easyentry position. The seat will move to the final position when the key is inthe ignition (if easy entry feature is enabled).Locks and Security 138 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Programming memory feature to Transmitter To activate this feature:1. Move the driver seat, power mirrors, adjustable pedal and steering column to the desired positions using the associated controls. 2. Press and hold the control button 1 for five seconds. A tone will beheard after about two secondsconfirming memory position hasbeen set. Continue to hold until asecond tone is heard after fiveseconds. 3. Within three seconds press the . 4. A tone will be heard when the transmitter programming is complete. 5. Press the 6. Repeat this procedure for memory 2 and another transmitter if desired. Deprogramming memory feature from Transmitter To deactivate this feature:1. Press and hold either the 1 or 2 control on the driver’s door for five seconds. A tone will be heard after 1 1⁄2seconds when the memory store is done, continue to hold until a second tone is heard after five seconds. 2. Within three seconds press the . 3. A tone will be heard when the deactivation is complete. 4. Repeat this procedure for transmitter if desired. Replacing the battery The remote entry transmitter uses one coin type three-volt lithium battery CR2032 or equivalent.Locks and Security 139 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
To replace the battery: 1. Twist a thin coin between the two halves of the remote entrytransmitter near the key ring. DONOT TAKE THE RUBBER COVERAND CIRCUIT BOARD OFF THEFRONT HOUSING OF THEREMOTE ENTRY TRANSMITTER. 2. Do not wipe off any grease on the battery terminals on the backsurface of the circuit board. 3. Remove the old battery.Note: Please refer to local regulations when disposing of transmitter batteries. 4. Insert the new battery. Refer to the diagram inside the remote entrytransmitter for the correct orientation of the battery. Press the battery down to ensure that thebattery is fully seated in the battery housing cavity. 5. Snap the two halves back together.Note: Replacement of the battery will not cause the remote transmitter to become deprogrammed from your vehicle. The remote transmitter should operate normally after battery replacement. Replacing lost transmitters If a remote transmitter has been lost and you would like to remove it from the vehicle’s memory, or you would like to purchase additional remote transmitters and have them programmed to your vehicle: •Take allyour vehicle’s transmitters to your authorized dealer for programming, or •Perform the programming procedure yourself. Programming remote transmittersIt is necessary to have all(maximum of four — original and/or new) of your remote transmitters available prior to beginning this procedure. If all remote entry transmitters are not present during the programmingLocks and Security 140 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
procedure, the transmitters that are not present during programming will no longer operate the vehicle. To program the transmitters yourself: Note: Ensure the brake pedal is not depressed during this sequence.•Unlock all doors using the power door lock/unlock control. Insert a key and turn the ignition fromthe 1 (off) to the 3 (on) positionand cycle between 1 (off) and 3(on) eight times in rapidsuccession (within 10 seconds)with the eighth turn ending in the 3 (on) position. The locks will cycle to confirm that the programming mode has been entered. •Within 20 seconds, program a remote transmitter by pressing any button on a transmitter. The locks will cycle once to confirm that theremote transmitter has been programmed. (If more than 20 secondspass before pressing a remote transmitter button, the programmingmode will exit and the procedure will have to be repeated.) •Repeat the previous step to program additional remote transmitters. The locks will cycle once to confirm that each remote transmitter hasbeen programmed. •When you have completed programming the remote transmitters, turn the ignition to the 1 (off) position or wait 20 seconds. Again the doorswill lock/unlock to confirm programming has been completed. Illuminated entry The interior lamps and parking lamps illuminate when the remote entry system is used to unlock the door(s) or sound the personal alarm, orwhen the factory set 5-digit code or your personal code are correctlyentered into the keyless keypad. The illuminated entry system will turn off the lights if:•the ignition switch is turned to the on position, or •the remote transmitter lock control is pressed, or •after 25 seconds of illumination. The dome lamp control (if equipped) must not be set to the off position for the illuminated entry system to operate.43 2 1Locks and Security 141 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
The lights will not turn off if: •they have been turned on with the dimmer control, or •any door is open. The battery saver will shut off the interior lamps 10 minutes after the last door is closed, even if the dimmer control is on. SECURICODE™ KEYLESS ENTRY SYSTEM (IF EQUIPPED) You can use the keyless entry keypad to: •lock all vehicle doors. •unlock only the driver’s door. •unlock all vehicle doors. •program/erase the customer keycode. •enable/disable the autolocking feature. The keypad can be operated with the factory set 5–digit entry code; this code is located on the owner’s wallet card in the glove box, is marked onthe computer module, and is available from your authorized dealer. Youcan also create your own 5–digit personal entry code. When pressing the controls on the keypad, press the middle of the controls to ensure a good activation. Anti-scan feature The keyless entry keypad is equipped with an anti-theft function called “antiscan.” The antiscan feature provides a one-minute lockout feature,where the user is unable to enter the vehicle using the keypad; thislockout occurs when a valid entry code has not been entered by the userwithin seven attempts (35 consecutive button presses). During thelockout, the keypad will flash and pressing the controls on the keypadwill be ignored, except for pressing the 7 •8 and the 9 •0 controls simultaneously, which will still lock the vehicle. The anti-scan feature will be turned off after:•one minute, when the anti-scan feature times out. •one minute of keypad inactivity. •the control is pressed on the remote entry transmitter. •the ignition is turned from the off position to the on position, or from the on position to the off position.Locks and Security 142 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Programming a personal entry code To create your own personal entry code:1. Enter the factory set code (keypad will illuminate when pressed).2. Within five seconds press the 1 •2 on the keypad. 3. Enter your personal 5-digit code. Each number must be entered within five seconds of each other. 4. After the code is entered, the locks will cycle, confirming that the new code has been set. Tips:•Do not set a code that uses five of the same number. •Do not use five numbers in sequential order. •The factory set code will work even if you have set your own personal code. •If you set a second personal code it will erase your first personal code. Erasing personal code1. Enter the factory set 5–digit code.2. Press and release 1 •2 then, 3. Press and hold the 1 •2 for two seconds. This must be done within five seconds of completing Step 1.Your personal code is now erased and only the factory set 5–digit code will work. Unlocking and locking the doors using keyless entry keypad To unlock the driver’s door, enter the factory set 5-digit code or your personal code. Each number must be pressed within five seconds of each other. Note: The driver’s door will unlock and the interior lamps will illuminate after the factory set 5-digit code or your personal code arecorrectly entered. To unlock all doors, press the 3 •4 control within five seconds. To lock all doors, press the 7 •8 and the 9 •0 at the same time. You do not need to enter the keypad code first. Note: The interior lamps will turn off.Locks and Security 143 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
SECURILOCK/H23006 PASSIVE ANTI-THEFT SYSTEM SecuriLock /H23041passive anti-theft system is an engine immobilization system. This system is designed to help prevent the engine from being started unless a coded key programmed to your vehicle is used. The use of the wrong type of coded key may lead to a “no-start” condition. Your vehicle comes with two coded keys; additional coded keys may be purchased from your authorized dealer. The authorized dealer canprogram your spare keys to your vehicle or you can program the keysyourself. Refer to Programming spare keys for instructions on how to program the coded key. Note: The SecuriLock /H23041passive anti-theft system is not compatible with non-Ford aftermarket remote start systems. Use of these systems may result in vehicle starting problems and a loss of security protection. Note: Large metallic objects, electronic devices that are used to purchase gasoline or similar items, or a second coded key on the same key chain may cause vehicle starting issues. You need to prevent theseobjects from touching the coded key while starting the engine. Theseobjects will not cause damage to the coded key, but may cause amomentary issue if they are too close to the key when starting theengine. If a problem occurs, turn the ignition off, remove all objects onthe key chain away from the coded key and restart the engine. Note: Do not leave a duplicate coded key in the vehicle. Always take your keys and lock all doors when leaving the vehicle.Locks and Security 144 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Anti-theft indicator The anti-theft indicator is located in the instrument cluster. •When the ignition is in the off position, the indicator will flash once every two seconds toindicate the SecuriLock /H23041system is functioning as a theft deterrent. •When the ignition is in the on position, the indicator will glow for three seconds to indicate normal system functionality. If a problem occurs with the SecuriLock /H23041system, the indicator will flash rapidly or glow steadily when the ignition is in the on position. If thisoccurs, turn the ignition off then back to on to make sure there was noelectronic interference with the programmed key. If the vehicle doesn’t start, try to start it with the 2nd programmed key and if successfulcontact your authorized dealership for key replacement. If the indicatorstill flashes rapidly or glows steadily, the vehicle will not start, contactyour authorized dealer as soon as possible for service. Automatic arming The vehicle is armed immediately after switching the ignition to the off position. Automatic disarming Switching the ignition to the on position with a coded key disarms the vehicle. Replacement keys If your keys are lost or stolen and you don’t have an extra coded key, you will need to have your vehicle towed to an authorized dealer. Thekey codes need to be erased from your vehicle and new coded keys willneed to be programmed. Replacing coded keys can be very costly. Store an extra programmed key away from the vehicle in a safe place to help prevent anyinconveniences. Please visit an authorized dealer to purchase additionalspare or replacement keys. Programming spare keys A maximum of eight keys can be coded to your vehicle. Only SecuriLock /H23041keys can be used. To program a coded key yourself, youLocks and Security 145 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
will need two previously programmed coded keys (keys that already operate your vehicle’s engine) and the new unprogrammed key(s) readily accessible for timely implementation of each step in the procedure. If two previously programmed coded keys are not available, you must bring your vehicle to your authorized dealer to have the spare codedkey(s) programmed. Please read and understand the entire procedure before you begin. 1. Insert the first previously programmed coded key into the ignition. 2. Turn the ignition from the 1 (off) position to the 3 (on) position. Keepthe ignition in the 3 (on) positionfor at least three seconds, but nomore than 10 seconds. 3. Turn the ignition to the 1 (off) position and remove the first coded key from the ignition. 4. After three seconds but within 10 seconds of turning the ignition tothe 1 (off) position, insert the second previously coded key into the ignition. 5. Turn the ignition from the 1 (off) position to the 3 (on) position. Keep the ignition in the 3 (on) position for at least three seconds, but no morethan 10 seconds. 6. Turn the ignition to the 1 (off) position and remove the second previously programmed coded key from the ignition. 7. After three seconds but within 20 seconds of turning the ignition to the1 (off) position and removing the previously programmed coded key, insert the new unprogrammed key (new key/valet key) into the ignition. 8. Turn the ignition from the 1 (off) position to the 3 (on) position. Keepthe ignition in the 3 (on) position for at least six seconds. 9. Remove the newly programmed coded key from the ignition. If successful, the new coded key(s) will start the vehicle’s engine and the theft indicator will illuminate for three seconds and then go out. If not successful, the new coded key(s) will not start the vehicle’s engine and the theft indicator will flash on and off and you may repeat Steps 1through 5. If failure repeats, bring your vehicle to your authorized dealerto have the new spare key(s) programmed. Note: To program MyKey features, refer to MyKey in this chapter.43 2 1Locks and Security 146 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
SEATING WARNING: Reclining the seatback can cause an occupant to slide under the seat’s safety belt, resulting in severe personal injuries in the event of a collision. WARNING: Do not pile cargo higher than the seatbacks to reduce the risk of injury in a collision or sudden stop. WARNING: Before returning the seatback to its original position, make sure that cargo or any objects are not trapped behind the seatback. After returning the seatback to its original position, pull on the seatback to ensure that it has fully latched. Anunlatched seat may become dangerous in the event of a sudden stop orcollision. Adjustable head restraints Your vehicle is equipped with front row outboard head restraints that are vertically adjustable. WARNING: To minimize the risk of neck injury in the event of a crash, the driver and passenger occupants should not sit in and/or operate the vehicle, until the head restraint is placed in itsproper position. The driver should never adjust the head restraintwhile the vehicle is in motion. The adjustable head restraintsconsist of : •a trimmed energy absorbing foam and structure (1), •two steel stems (2), •a guide sleeve adjust/release button (3), •and a guide sleeve unlock/remove button (4).Seating and Safety Restraints 147 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
To adjust the head restraint, do the following: 1. Adjust the seatback to an upright driving/riding position.2. Raise the head restraint by pulling up on the head restraint. 3. Lower the head restraint by pressing and holding the guidesleeve adjust/release button andpushing down on the head restraint. Properly adjust the head restraint so that the top of the head restraint is even with the top of your head and positioned as close as possible to theback of your head. For occupants of extremely tall stature, adjust thehead restraint to its full up position. WARNING: The adjustable head restraint is a safety device. Whenever possible it should be installed and properly adjusted when the seat is occupied.Seating and Safety Restraints 148 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
To remove the adjustable head restraint, do the following: 1. Pull up the head restraint until it reaches the highest adjustmentposition. 2. Simultaneously press and hold both the adjust/release button andthe unlock/remove button, then pullup on the head restraint. To reinstall the adjustable head restraint, do the following: 1. Insert the two stems into the guide sleeve collars. 2. Push the head restraint down until it locks. Properly adjust the head restraint so that the top of the head restraint is even with the top of your head and positioned as close as possible to theback of your head. For occupants of extremely tall stature, adjust thehead restraint to its full up position.Seating and Safety Restraints 149 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
WARNING: To minimize the risk of neck injury in the event of a crash, head restraints must be installed properly. Front seat •Lift the track release bar to move the seat forward or rearward. Make sure that the seat isrelatched into place.Seating and Safety Restraints 150 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
•Pull the release lever handle located on the side of the seat up to move the seatback forward orbackward. Using the armrest (if equipped) •Push the release control to move the armrest up or down. •Pull out the drawer at the bottom of the center seat to access the cup holders (if equipped)Seating and Safety Restraints 151 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
•To gain access to the storage compartment (if equipped) in your armrest, lift the latch toopen the lid. Using the manual lumbar support For more lumbar support, turn the lumbar support control toward thefront of vehicle. For less lumbar support, turn the lumbar support control toward therear of vehicle.Seating and Safety Restraints 152 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Using the power lumbar support (if equipped) The power lumbar control is located on the outboard side of the seat. Press the forward side of the control for additional support. Press the rear side of the control to reduce support. Adjusting the front power seat (if equipped) WARNING: Never adjust the driver’s seat or seatback when the vehicle is moving. WARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips. WARNING: Reclining the seatback can cause an occupant to slide under the seat’s safety belt, resulting in severe personal injuries in the event of a collision. WARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the decision of the passenger sensing system, resulting in serious injury or death in a crash. Always sit upright against yourseatback, with your feet on the floor. WARNING: To reduce the risk of possible serious injury: Do not hang objects off seat back or stow objects in the seatback map pocket (if equipped) when a child is in the front passenger seat. Donot place objects underneath the front passenger seat or between theseat and the center console (if equipped). Check the “passenger airbagoff” or “pass airbag off” indicator lamp for proper airbag status. RefertoFront passenger sensing system in the Airbag supplemental restraint system (SRS) section for additional details. Failure to follow these instructions may interfere with the front passenger seat sensingsystem.Seating and Safety Restraints 153 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
The control is located on the outboard side of the seat cushion. Move the switch in the direction of the arrows to raise or lower thefront portion of the seat cushion. Move the switch in the direction of the arrows to raise or lower the rearportion of the seat cushion. Press the switch in the direction of the arrows to move the seatforward, backward, up or down. Power recline (if equipped) Press the control to recline the seatback forward or rearward.Seating and Safety Restraints 154 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Memory seat/power mirrors/adjustable pedals/steering column (if equipped) This system allows automatic positioning of the driver seat, powermirrors, adjustable pedals, andsteering column to twoprogrammable positions. The memory seat control is located on the driver’s seat. •To program position 1, move the driver seat, power mirrors and steering column to the desired position using the associated controls. Press and hold button 1 for atleast two seconds. A chime will sound confirming that a memoryposition has been set. •To program position 2, repeat the previous procedure using button 2. A memory seat position may be programmed at any time. To program the memory feature to a remote entry transmitter, refer to Remote entry system in the Locks and Security chapter. A programmed memory position can be recalled: •in any gearshift position if the ignition is not on. •only in P (Park) or N (Neutral) if the ignition is on. The memory positions are also recalled when you press your remote entry transmitter (unlock) control (if the transmitter is programmed to a memory position) or, when you enter a valid personal entry code that is programmed to a memory position. The mirrors will move to theprogrammed position and the seat will move to the easy entry position.The seat will move to the final position when the key is in the ignition (ifeasy entry feature is enabled). Easy-access/easy-out feature (if equipped) The easy entry feature automatically moves the driver’s seat 2 inches (5 cm) forward when: •the transmission is in P (Park) •the key is inserted into the ignition cylinder (If the seat is located less than 2 inches [5 cm] from the front of the seat track, the seat will travel up to 1⁄4inch (6 mm) to the front of the seat track).Seating and Safety Restraints 155 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
The easy out feature automatically moves the driver’s seat 2 inches (5 cm) backward when: •the transmission is in P (Park) •the key is removed from the ignition cylinder (If the seat is located less than 2 inches (5 cm) from the rear of the seat track, the seat will travel up to1⁄4inch (6 mm) to the rear of the seat track). If the memory setting is programmed through the remote transmitter, upon unlocking the door via remote entry system, the seat position willtravel to the desired memory setting less 2 inches (5 cm). Once enteringthe vehicle and inserting the key in the ignition while in P (Park), theeasy entry feature will move the seat an additional 2 inches (5 cm) tothe desired memory location. See Locks and Security for activating the memory seat feature through the remote entry system. Deactivating/activating the easy access/easy out feature The easy entry/exit feature can be turned off or on through the vehicle message center (if equipped). If your vehicle does not have a messagecenter, the feature can be turned off or on through the following process: 1. Put the key into the ignition (The driver seat may move forward if the easy entry/exit feature is activated). 2. Place the ignition key into the on position (do not start the vehicle). When the vehicle is in the on position, the interior and exterior lights, the climate controls, and the radio are functional without the enginestarted. See Programming remote transmitters for ignition switch diagram. 3. Turn the ignition key to the off position.4. Cycle the ignition key between the off position and the on position a total of three times ending with the ignition in the off position. 5. Engage the forward or rearward seat switch.6. Remove the ignition key from the ignition switch. (The driver seat may move rearward if the easy entry/exit feature is activated). Steps 2 through 6 must be performed within a 20 second period. The easy entry/exit feature will be deactivated. Repeating the above processwill also reactivate the easy entry/exit feature.Seating and Safety Restraints 156 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Heated seats (if equipped) WARNING: Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions, must exercise care when using the seat heater. The seatheater may cause burns even at low temperatures, especially if usedfor long periods of time. Do not place anything on the seat thatinsulates against heat, such as a blanket or cushion, because this maycause the seat heater to overheat. Do not puncture the seat with pins,needles, or other pointed objects because this may damage the heatingelement which may cause the seat heater to overheat. An overheatedseat may cause serious personal injury. Note: Do not do the following: •Place heavy objects on the seat •Operate the seat heater if water or any other liquid is spilled on the seat. Allow the seat to dry thoroughly. To operate the heated seats, do the following: Press the heated seat symbol to cycle through the various heatsettings and off. Warmer settings areindicated by more indicator lights. The system automatically shuts off after 10 minutes. Heated and cooled seats (if equipped) The controls for the climate controlled seats are located on the climate control system.Seating and Safety Restraints 157 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Heated seats WARNING: Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions, must exercise care when using the seat heater. The seatheater may cause burns even at low temperatures, especially if usedfor long periods of time. Do not place anything on the seat thatinsulates against heat, such as a blanket or cushion, because this maycause the seat heater to overheat. Do not puncture the seat with pins,needles, or other pointed objects because this may damage the heatingelement which may cause the seat heater to overheat. An overheatedseat may cause serious personal injury. Note: Do not do the following: •Place heavy objects on the seat •Operate the seat heater if water or any other liquid is spilled on the seat. Allow the seat to dry thoroughly. The heated seats will only function when the engine is running. To operate the heated seats:Press the heated seat symbol to cycle through the various heatsettings and off. Warmer settings areindicated by more indicator lights. Cooled seats The cooled seats will only function when the engine is running.To operate the cooled seats:Press the cooled seat symbol to cycle through the various coolingsettings and off. Cooler settings areindicated by more indicator lights. If the engine falls below 350 rpm while the cooled seats are on, the feature will turn itself off and will need to be reactivated. A/CSeating and Safety Restraints 158 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Climate controlled seats air filter replacement (if equipped) The climate controlled seat system includes air filters that must be replaced periodically. Refer to the scheduled maintenance information for more information. •There is a filter located under the rear of each front seat. •The filter can be accessed from the 2nd row foot-well area. Move the front seats all the way to the full front and full up positions to ease access. To remove an air filter: 1. Turn the vehicle off.2. Push up on the outside rigid edge of the filter and rotate toward thefront of the vehicle once tabs arereleased. 3. Remove filter.Seating and Safety Restraints 159 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
To install a filter: 1. Position the filter in itshousing making sure that the far forwardend is all the way up in the housing. 2. Push in on the center of the outside edge of the filter and rotateup into the housing until it clips intoposition. REAR SEATS Second row head restraints Your vehicle is equipped with 2nd row outboard head restraints that are vertically adjustable. WARNING: To minimize the risk of neck injury in the event of a crash, the driver and passenger occupants should not sit in and/or operate the vehicle, until the head restraint is placed in itsproper position. The driver should never adjust the head restraintwhile the vehicle is in motion. The adjustable head restraintsconsist of : •a trimmed energy absorbing foam and structure (1), •two steel stems (2), •a guide sleeve adjust/release button (3), •and a guide sleeve unlock/remove button (4).Seating and Safety Restraints 160 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
To adjust the head restraint, do the following: 1. Raise the head restraint by pulling up on the head restraint. 2. Lower the head restraint by pressing and holding the guidesleeve adjust/release button andpushing down on the head restraint. Properly adjust the head restraint so that the top of the head restraint is even with the top of your head and positioned as close as possible to theback of your head. For occupants of extremely tall stature, adjust thehead restraint to its full up position. WARNING: The adjustable head restraint is a safety device. Whenever possible it should be installed and properly adjusted when the seat is occupied.Seating and Safety Restraints 161 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
To remove the adjustable head restraint, do the following: 1. Pull up the head restraint until it reaches the highest adjustmentposition. 2. Simultaneously press and hold both the adjust/release button andthe unlock/remove button, then pullup on the head restraint. To reinstall the adjustable head restraint, do the following: 1. Insert the two stems into the guide sleeve collars. 2. Push the head restraint down until it locks. Properly adjust the head restraint so that the top of the head restraint is even with the top of your head and positioned as close as possible to the back of your head. For occupants of extremely tall stature, adjust thehead restraint to its full up position. WARNING: To minimize the risk of neck injury in the event of a crash, head restraints must be installed properly.Seating and Safety Restraints 162 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Folding up the rear seats (SuperCab only) The rear seat has a split 60/40 cushion. Each seat cushion can be flipped up into a vertical storage position. 1. Pull control to release seat cushion. 2. Rotate seat cushion up until it locks into vertical storage position. Returning the seat to seating position WARNING: Make sure that cargo or any objects are not trapped underneath the seat cushion before returning the seat cushion to its original position, and that the seat cushion locks into place. Failure to do so may prevent the seat from operating properly in the event ofa crash, which could increase the risk of serious injury. 1. Pull control on the side of the seat to release seat cushion fromstorage position. 2. Push seat cushion down until it locks into horizontal position. Folding up the rear seats (SuperCrew vehicles only) The rear seat has a split 60/40 cushion. Each seat cushion can be flipped up into a vertical storage position. •Rotate seat cushion up by lifting on the corner until it locks into vertical storage position.Seating and Safety Restraints 163 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Returning the seat to seating position WARNING: Before returning the seat cushion to its original position, make sure that cargo or any objects are not trapped underneath the seat cushion. 1. Pull control on the bottom of the seat cushion to release seat cushionfrom storage position. 2. Push seat cushion down until it rests into the horizontal position. Armrest and cupholders (if equipped) Pull the strap located on the center seatback to access the armrest andcupholders. The cupholders are located inside the rear seat armrest. To open thecupholders: •Push in gently on the center of the plastic panel on the front edge of the armrest. Thecupholders will partially open. •Pull the cupholder fully open before using. To close the cupholders: •Push the front edge back into the seat until the cupholders are fully seated. •Make sure there is nothing in the cupholders before attempting to close them. Make sure that the cupholders are fully seated before stowing the armrest.Seating and Safety Restraints 164 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Rear heated seats (if equipped) WARNING: Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions, must exercise care when using the seat heater. The seatheater may cause burns even at low temperatures, especially if usedfor long periods of time. Do not place anything on the seat thatinsulates against heat, such as a blanket or cushion, because this maycause the seat heater to overheat. Do not puncture the seat with pins,needles, or other pointed objects because this may damage the heatingelement which may cause the seat heater to overheat. An overheatedseat may cause serious personal injury. Note: Do not do the following: •Place heavy objects on the seat •Operate the seat heater if water or any other liquid is spilled on the seat. Allow the seat to dry thoroughly. The rear seat heat controls are located on the rear door armrest. To operate the heated seats:•Push the indicated side of the control for maximum heat. •Push again to deactivate. •Push the indicated side of the control for minimum heat. •Push again to deactivate. The heated seat module resets at every ignition run cycle. While the ignition is in the on position, activating the high or low heated seatswitch enables heating mode. When activated, they will turn offautomatically when the engine is turned off.Seating and Safety Restraints 165 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
The indicator light will illuminate when the heated seats have been activated. SAFETY RESTRAINTSPersonal Safety System™ The Personal Safety System provides an improved overall level of frontal crash protection to front seat occupants and is designed to help furtherreduce the risk of airbag-related injuries. The system is able to analyzedifferent occupant classifications and conditions and crash severitybefore activating the appropriate safety devices to help better protect arange of occupants in a variety of frontal crash situations. Your vehicle’s Personal Safety System consists of:•Driver and passenger dual-stage airbag supplemental restraints. •Front outboard safety belts with pretensioners, energy management retractors, and safety belt usage sensors. •Driver’s seat position sensor. •Front crash severity sensor. •Front passenger sensing system •Passenger Airbag Off indicator light. •Restraints Control Module (RCM) with impact and safing sensors. •Restraint system warning light and back-up tone. •The electrical wiring for the airbags, crash sensor(s), safety belt pretensioners, front safety belt usage sensors, driver seat position sensor, and indicator lights. How does the Personal Safety System™ work? The Personal Safety System can adapt the deployment strategy of your vehicle’s safety devices according to crash severity and occupantclassification and conditions. A collection of crash and occupant sensorsprovides information to the Restraints Control Module (RCM). During acrash, the RCM may activate the safety belt pretensioners and/or eithernone, one, or both stages of the dual-stage airbag supplemental restraintsbased on crash severity and occupant classification and conditions. The fact that the pretensioners or airbags did not activate for both front seat occupants in a collision does not mean that something is wrong withthe system. Rather, it means the Personal Safety System determined theaccident conditions (crash severity, belt usage, etc.) were notSeating and Safety Restraints 166 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
appropriate to activate these safety devices. Front airbags are designed to activate only in frontal and near-frontal collisions, not rollovers,side-impacts, or rear-impacts unless the collision causes sufficientlongitudinal deceleration. Driver and passenger dual-stage airbag supplemental restraints The dual-stage airbags offer the capability to tailor the level of airbag inflation energy. A lower, less forceful energy level is provided for morecommon, moderate-severity impacts. A higher energy level is used forthe most severe impacts. Refer to Airbag Supplemental Restraints (SRS) section in this chapter. Front crash severity sensor The front crash severity sensor enhances the ability to detect the severity of an impact. Positioned up front, it provides valuableinformation early in the crash event on the severity of the impact. Thisallows your Personal Safety System to distinguish between differentlevels of crash severity and modify the deployment strategy of thedual-stage airbags and safety belt pretensioners. Driver’s seat position sensor The driver’s seat position sensor allows your Personal Safety System to tailor the deployment level of the driver dual-stage airbag based on seatposition. The system is designed to help protect smaller drivers sittingclose to the driver airbag by providing a lower airbag output level. Front passenger sensing system For airbags to do their job they must inflate with great force, and this force can pose a potentially deadly risk to occupants that are very closeto the airbag when it begins to inflate. For some occupants, like infantsin rear-facing child seats, this occurs because they are initially sittingvery close to the airbag. For other occupants, this occurs when theoccupant is not properly restrained by safety belts or child safety seatsand they move forward during pre-crash braking. The most effective wayto reduce the risk of unnecessary injuries is to make sure all occupantsare properly restrained. Accident statistics suggest that children aremuch safer when properly restrained in the rear seating positions than inthe front. WARNING: Airbags can kill or injure a child in a child seat. NEVER place a rear-facing child seat in front of an active air bag. If you must use a forward-facing child seat in the front seat, movethe seat all the way back.Seating and Safety Restraints 167 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
WARNING: Always transport children 12 years old and under in the back seat and always properly use appropriate child restraints. WARNING: When possible, all children 12 years old and under should be properly restrained in a rear seating position. The front passenger sensing system can automatically turn off the passenger front airbag when a rear facing child seat, a forward-facingchild restraint, or a booster seat is detected. Even with this technology,parents are STRONGLY encouraged to always properly restrain children in the rear seat. The sensor also turns off the passenger front airbag andpassenger seat-mounted side airbag when the passenger seat is empty. When the front passenger seat is occupied and the sensing system has turned off the passenger’s frontal airbag, the “pass airbag off” indicatorwill light and stay lit to remind you that the front passenger frontalairbag is off. See Front passenger sensing system in the Airbag supplemental restraint system (SRS) section of this chapter. Front safety belt usage sensors The front safety belt usage sensors detect whether or not the driver and front outboard passenger safety belts are fastened. This informationallows your Personal Safety System to tailor the airbag deployment andsafety belt pretensioner activation depending upon safety belt usage.Refer to Safety belt usage sensors later in this chapter. Front outboard safety belt pretensioners The safety belt pretensioners at the front outboard seating positions are designed to tighten the safety belts firmly against the occupant’s bodyduring frontal collisions, and in side collisions and rollovers. This helpsincrease the effectiveness of the safety belts. In frontal collisions, thesafety belt pretensioners can be activated alone or, if the collision is ofsufficient severity, together with the front airbags. Front outboard safety belt energy management retractors The front outboard safety belt energy management retractors allow webbing to be pulled out of the retractor in a gradual and controlledmanner in response to the occupant’s forward momentum. This helpsreduce the risk of force-related injuries to the occupant’s chest bylimiting the load on the occupant. Refer to Energy management retractors section in this chapter.Seating and Safety Restraints 168 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Determining if the Personal Safety System is operational The Personal Safety System uses a warning light in the instrument cluster or a back-up tone to indicate the condition of the system. Refer to the Warning lights and chimes section in the Instrument Cluster chapter. Routine maintenance of the Personal Safety System is notrequired. The Restraints Control Module (RCM) monitors its own internal circuits and the circuits for the airbag supplemental restraints, crash sensor(s),safety belt pretensioners, front safety belt buckle sensors, and the driverseat position sensor. In addition, the RCM also monitors the restraintswarning light in the instrument cluster. A difficulty with the system isindicated by one or more of the following. •The warning light will either flash or stay lit. •The warning light will not illuminate immediately after ignition is turned on. •A series of five beeps will be heard. The tone pattern will repeat periodically until the problem and warning light are repaired. If any of these things happen, even intermittently, have the Personal Safety System serviced at an authorized dealer immediately. Unlessserviced, the system may not function properly in the event of acollision. Safety restraints precautions WARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips. WARNING: To reduce the risk of injury, make sure children sit in a rear seating position where they can be properly restrained. WARNING: Never let a passenger hold a child on his or her lap while the vehicle is moving. The passenger cannot protect the child from injury in a collision. WARNING: All occupants of the vehicle, including the driver, should always properly wear their safety belts, even when an airbag supplemental restraint system (SRS) is provided.Seating and Safety Restraints 169 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
WARNING: It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equippedwith seats and safety belts. Be sure everyone in your vehicle is in aseat and using a safety belt properly. WARNING: In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a safety belt. WARNING: Each seating position in your vehicle has a specific safety belt assembly which is made up of one buckle and one tongue that are designed to be used as a pair. 1) Use the shoulder belton the outside shoulder only. Never wear the shoulder belt under thearm. 2) Never swing the safety belt around your neck over the insideshoulder. 3) Never use a single belt for more than one person. WARNING: When possible, all children 12 years old and under should be properly restrained in a rear seating position. WARNING: Safety belts and seats can become hot in a vehicle that has been closed up in sunny weather; they could burn a small child. Check seat covers and buckles before you place a childanywhere near them. WARNING: Front and rear seat occupants, including pregnant women, should wear safety belts for optimum protection in an accident.Seating and Safety Restraints 170 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Combination lap and shoulder belts 1. Insert the belt tongue into the proper buckle (the buckle closest tothe direction the tongue is comingfrom) until you hear a snap and feelit latch. Make sure the tongue issecurely fastened in the buckle. 2. To unfasten, push the release button and remove the tongue fromthe buckle. Center front safety belt (Regular Cab center and CrewCab rear center seating positions only) WARNING: Always use both lap and shoulder safety belt in the Regular Cab center seating position. If you carry large cargo behind the seat or items that might damage orsoil the belt, detach the belt from the seat: •Release the mini-buckle by inserting a key or similar object into the slot.Seating and Safety Restraints 171 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
If the belt has been disconnected to carry large objects behind the seat, reconnect it as follows: •Buckle the small tongue on the end of the belt into the mini-buckle on the driver’s side.The belt is now ready for use.This mini-buckle should staybuckled at all times unlesscargo-carrying makes it necessaryto detach the belt. Safety belt with cinch tongue (Regular Cab center only) The cinch tongue will slide up and down the belt webbing when the belt is stowed or while putting safety belts on. When the lap/shoulder safetybelt is buckled, the cinch tongue will allow the lap portion to beshortened, but pinches the webbing to keep the lap portion from gettinglonger. The cinch tongue is designed to slip during a crash, so alwayswear the shoulder belt properly and don’t allow any slack in either the lap or shoulder portions. Before you can reach and latch a combination lap and shoulder belt having a cinch tongue into the buckle, you may have to lengthen the lapbelt portion of it. 1. To lengthen the lap belt, pull some webbing out of the shoulderbelt retractor. 2. While holding the webbing below the tongue, grasp the tip (metalportion) of the tongue so that it isparallel to the webbing and slide thetongue upward. 3. Provide enough lap belt length so that the tongue can reach the buckle. How to fasten the cinch tongue (Regular Cab center only) 1. Pull the combination lap and shoulder belt from the retractor so that the shoulder belt portion of the safety belt crosses your shoulder andchest.Seating and Safety Restraints 172 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
2. Be sure the belt is not twisted. If the belt is twisted, remove the twist. 3. Insert the belt tongue into the proper buckle for your seating position until you hear a snap and feel it latch. 4. Make sure the tongue is securely fastened to the buckle by pulling on the tongue. WARNING: The lap belt should fit snugly and as low as possible around the hips, not across the waist. WARNING: Front and rear seat occupants, including pregnant women, should wear safety belts for optimum protection in an accident. WARNING: Each seating position in your vehicle has a specific safety belt assembly which is made up of one buckle and one tongue that are designed to be used as a pair. 1) Use the shoulder belton the outside shoulder only. Never wear the shoulder belt under thearm. 2) Never swing the safety belt around your neck over the insideshoulder. 3) Never use a single belt for more than one person. While you are fastened in the safety belt, the combination lap/shoulderbelt with a cinch tongue adjusts to your movement. However, if youbrake hard, turn hard, or if your vehicle receives an impact of 5 mph(8 km/h) or more, the safety belt will become locked and help reduceyour forward movement. Lap belts Adjusting the lap belt (Front center seat position SuperCab and SuperCrew only) WARNING: The lap belt should fit snugly and as low as possible around the hips, not across the waist. The front center lap belt tongue is designed to fit only in the correctbuckle. The tongue will not securely latch if you attempt to use it in anyof the outboard seating position buckles. To ensure that you have usedthe correct buckle you should hear a snap and feel it latch.Seating and Safety Restraints 173 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
•Front center lap belt The lap belt does not adjust automatically. Insert the tongue into the correct buckle (the buckle closest to thedirection the tongue is comingfrom). To lengthen the belt, turn thetongue at a right angle to the beltand pull across your lap until itreaches the buckle. To tighten thebelt, pull the loose end of the beltthrough the tongue until it fitssnugly across the hips. Shorten and fasten the belt when not in use. For long term storage, the lap belt can be placed into a pocket found on the inside lid of the storage compartment. To store the lap belt, do thefollowing: 1. Open the storage compartment lid.Seating and Safety Restraints 174 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
2. Place the lap belt into the pocket found on the inside lid of thestorage compartment. 3. Fold the center buckle into the storage compartment. 4. Close the lid. Before a passenger sits in the front center seat, make sure the lap belt and buckle are both placed in their in-use position, and no longerstowed. Always fasten your seat belt when riding in the front center seat. Energy management retractors Your vehicle has a safety belt system equipped with energy management retractors at the driver and front outboard passenger seating positions. An energy management retractor is a device which pays out webbing in a controlled manner. This feature is designed to help further reduce therisk of force-related injuries to the occupant. Safety belt systems equipped with an energy management retractor must be replaced if they were in use during a frontal collision which resultedin deployment of the frontal airbags. Refer to the Safety belt maintenance section in this chapter. The front and rear safety restraints in the vehicle are combination lapand shoulder belts. The front passenger outboard and rear outboard seatsafety belts have two types of locking modes described below: Vehicle sensitive mode The vehicle sensitive mode is the normal retractor mode, allowing free shoulder belt length adjustment to your movements and locking inresponse to vehicle movement. For example, if the driver brakessuddenly or turns a corner sharply, or the vehicle receives an impact ofapproximately 5 mph (8 km/h) or more, the combination safety belts willlock to help reduce forward movement of the driver and passengers. The front outboard safety belts can also be made to lock manually by quickly pulling on the shoulder belt. Rear safety belts (if equipped) canalso be made to lock up by pulling quickly on the belt. Automatic locking mode In this mode, the shoulder belt is automatically pre-locked. The belt will still retract to remove any slack in the shoulder belt.Seating and Safety Restraints 175 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
The automatic locking mode is not available on the driver safety belt, or the Regular Cab center safety belt. When to use the automatic locking mode •Anytime a child safety seat is installed in a front outboard passenger seating position in a Regular Cab/ SuperCab/ SuperCrew or any rear seating position of a SuperCab or SuperCrew. The Regular Cab frontcenter seatbelt has a cinch mechanism. Refer to Safety belt with cinch tongue (Regular Cab center only) earlier in this chapter. Children 12 years old and under should be properly restrained in arear seat whenever possible. Refer to Safety restraints for children orSafety seats for children later in this chapter. How to use the automatic locking mode 1. Buckle the combination lap and shoulder belt. •Right front passenger seat •Rear seats (if equipped)Seating and Safety Restraints 176 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
2. Grasp the shoulder portion and pull downward until the entire beltis extracted. 3. Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in the automatic lockingmode. How to disengage the automatic locking mode Disconnect the combination lap/shoulder belt and allow it to retract completely to disengage the automatic locking mode and activate thevehicle sensitive (emergency) locking mode. WARNING: After any vehicle collision, the safety belt systems at all seating positions (except the driver position, which does not have this feature) must be checked by an authorized dealer toverify that the automatic locking retractor feature for child seats is stillfunctioning properly. In addition, all safety belts should be checked forproper function. WARNING: BELT AND RETRACTOR ASSEMBLY MUST BE REPLACED if the safety belt assembly “automatic locking retractor” feature or any other safety belt function is not operatingproperly when checked by an authorized dealer. Failure to replace theBelt and Retractor assembly could increase the risk of injury incollisions. Safety belt pretensioner Your vehicle is equipped with safety belt pretensioners at the driver and right front passenger seating positions. The safety belt pretensioner removes some slack from the safety belt system at the start of a crash. The safety belt pretensioner uses thesame crash sensor system as the front airbags and Safety Canopy /H23041 System. When the safety belt pretensioner deploys, the lap and shoulderbelt are tightened.Seating and Safety Restraints 177 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
When the Safety Canopy /H23041System and/or the front airbags are activated, the safety belt pretensioners for the driver and right front passenger seating positions will be activated when the respective seatbelt isproperly buckled. WARNING: The driver and the right front passenger safety belt system (including retractors, buckles and height adjusters) must be replaced if the vehicle is involved in a collision that results indeployment of front airbags or Safety Canopy /H23041System and safety belt pretensioners. WARNING: Failure to replace the safety belt assembly under the above conditions could result in severe personal injuries in the event of a collision. Refer to the Safety belt maintenance section in this chapter. Safety belt usage sensors The driver and front outboard passenger safety belt buckles are equipped with sensors that detect if the safety belts are fastened. Thesensors provide information to the Personal Safety System /H23041which can then adapt the airbag deployment or safety belt pretensioner activationbased upon safety belt usage. WARNING: The Personal Safety System /H23041provides the most benefit to belted occupants. The system monitors and tailors the airbag deployment based upon safety belt usage. Failure to properlywear your safety belt will increase your risk of injury.Seating and Safety Restraints 178 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Front safety belt height adjustment Your vehicle has safety belt height adjustments at the front outboardseating positions. Adjust the heightof the shoulder belt so the belt restsacross the middle of your shoulder. To adjust the shoulder belt height, pull on the center button and slidethe height adjuster up or down.Release the button and pull downon the height adjuster to make sure it is locked in place. WARNING: Position the safety belt height adjusters so that the belt rests across the middle of your shoulder. Failure to adjust the safety belt properly could reduce the effectiveness of the safety belt and increase the risk of injury in a collision. Safety belt warning light and indicator chime The safety belt warning light illuminates in the instrument cluster and achime sounds to remind the occupants to fasten their safety belts. Conditions of operation If... Then... The driver’s safety belt is not buckled before the ignitionswitch is turned to the onposition...The safety belt warning lightilluminates 1-2 minutes and thewarning chime sounds 4-8 seconds. The driver’s safety belt isbuckled while the indicatorlight is illuminated and thewarning chime is sounding...The safety belt warning light andwarning chime turn off. The driver’s safety belt isbuckled before the ignitionswitch is turned to the onposition...The safety belt warning light andindicator chime remain off.Seating and Safety Restraints 179 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Belt-Minder /H23006 The Belt-Minder /H23041feature is a supplemental warning to the safety belt warning function. This feature provides additional reminders by intermittently sounding a chime and illuminating the safety belt warninglamp in the instrument cluster when the driver’s and front passenger’ssafety belt is unbuckled. The Belt-Minder /H23041feature uses information from the front passenger sensing system to determine if a front seat passenger is present and therefore potentially in need of a warning. To avoid activating theBelt-Minder /H23041feature for objects placed in the front passenger seat, warnings will only be given to large front seat occupants as determinedby the front passenger sensing system. Both the driver’s and passenger’s safety belt usages are monitored and either may activate the Belt-Minder /H23041feature. The warnings are the same for the driver and the front passenger. If the Belt-Minder /H23041warnings have expired (warnings for approximately five minutes) for one occupant(driver or front passenger), the other occupant can still activate theBelt-Minder /H23041feature. Note: If you are using MyKey™, the Belt-Minder /H23041warning will not expire. Refer to MyKey™ in the Locks and security chapter. When the Belt-Minder /H23041feature is activated, the safety belt warning light illuminates and the warning chime sounds for six seconds every30 seconds, repeating for approximately five minutes or until the safetybelts are buckled. The Belt-Minder /H23041feature uses two different warning chimes. During the first minute of activation, the warning chime will sound once every second. The remaining warning chimes will sound twice every secondwhile the system is activated.Seating and Safety Restraints 180 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
If... Then... The driver’s and front passenger’s safety belts arebuckled...The Belt-Minder /H23041feature will not activate. The driver’s or frontpassenger’s safety belt is notbuckled when the vehicle hasreached at least 6 mph and1-2 minutes have elapsed sincethe ignition switch has beenturned to ON...The Belt-Minder /H23041feature is activated - the safety belt warning lightilluminates and the warning chimesounds for six seconds every30 seconds, repeating forapproximately five minutes or untilthe safety belts are buckled. The driver’s or frontpassenger’s safety belt becomesunbuckled for approximately1 minute while the vehicle istraveling at least 6 mph and1-2 minutes have elapsed sincethe ignition switch has beenturned to ON...The Belt-Minder /H23041feature is activated - the safety belt warning lightilluminates and the warning chimesounds for six seconds every30 seconds, repeating forapproximately five minutes or untilthe safety belts are buckled. The Belt-Minder /H23041feature is activated and the vehicle speedis less than 3 mph...The Belt-Minder /H23041feature is suspended - the safety belt warninglight remains illuminated, but thewarning chime does not sound. Thistime does not count towards thefive-minute expiration time.Seating and Safety Restraints 181 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
The following are reasons most often given for not wearing safety belts: (All statistics based on U.S. data) Reasons given... Consider... “Crashes are rare events” 36700 crashes occur every day. The more we drive, the more we are exposed to “rare” events, even forgood drivers. 1i n4o fu sw i l lb e seriously injured in a crash duringour lifetime. “I’m not going far” 3o f4fatal crashes occur within 25 miles of home. “Belts are uncomfortable” We design our safety belts to enhance comfort. If you are uncomfortable -try different positions for the safetybelt upper anchorage and seatbackwhich should be as upright aspossible; this can improve comfort. “I was in a hurry” Prime time for an accident.Belt-Minder /H23041reminds us to take a few seconds to buckle up. “Safety belts don’t work” Safety belts, when used properly, reduce risk of death to front seat occupants by 45% in cars, and by 60% in light trucks. “Traffic is light” Nearly 1 of 2 deaths occur insingle-vehicle crashes, many when no other vehicles are around. “Belts wrinkle my clothes” Possibly, but a serious crash can do much more than wrinkle your clothes,particularly if you are unbelted. “The people I’m with don’twear belts”Set the example, teen deaths occur 4times more often in vehicles withTWO or MORE people. Children andyounger brothers/sisters imitatebehavior they see.Seating and Safety Restraints 182 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Reasons given... Consider... “I have an airbag” Airbags offer greater protection when used with safety belts. Frontal airbags are not designed to inflate in rear andside crashes or rollovers. “I’d rather be thrown clear” Not a good idea. People who are ejected are 40 times more likelyto DIE. Safety belts help prevent ejection, WE CAN’T “PICK OURCRASH”. WARNING: Do not sit on top of a buckled safety belt or insert a latchplate into the buckle to avoid the Belt-Minder /H23041chime. To do so may adversely affect the performance of the vehicle’s airbag system. Deactivating/activating the Belt-Minder /H23006feature The driver and front passenger Belt-Minder /H23041are deactivated/activated independently. When deactivating/activating one seating position, do not buckle the other position as this willterminate the process. Read Steps1-4t horoughly before proceeding with the deactivation/activation programming procedure.Note: If you are using MyKey™, the Belt-Minder /H23041cannot be disabled. Also, if the Belt-Minder /H23041has been previously disabled, it will be re-enabled after the use of MyKey™. Refer to MyKey™ in the Locks and security chapter. The driver and front passenger Belt-Minder /H23041features can be deactivated/activated by performing the following procedure: Before following the procedure, make sure that:•The parking brake is set •The gearshift is in P (Park) •The ignition switch is in the off position •The driver and front passenger safety belts are unbuckledSeating and Safety Restraints 183 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
WARNING: While the design allows you to deactivate your Belt-Minder /H23041, this system is designed to improve your chances of being safely belted and surviving an accident. We recommend you leave the Belt-Minder /H23041system activated for yourself and others who may use the vehicle. To reduce the risk of injury, do notdeactivate/activate the Belt-Minder /H23041feature while driving the vehicle. 1. Turn the ignition switch to the on position. DO NOT START THE ENGINE. 2. Wait until the safety belt warning light turns off. (Approximately one minute) •Step 3 must be completed within 30 seconds after the safety belt warning light turns off. 3. For the seating position being disabled, buckle then unbuckle the safety belt three times, ending in the unbuckled state. •After Step 3, the restraint system warning light (airbag light) will be turned on for three seconds. 4. Within approximately seven seconds of the light turning off, buckle then unbuckle the safety belt. •This will disable the Belt-Minder /H23041feature for that seating position if it is currently enabled. As confirmation, the restraint system warning light will flash four times per second for three seconds. •This will enable the Belt-Minder /H23041feature for that seating position if it is currently disabled. As confirmation, the restraint system warninglight will flash four times per second for three seconds, followed bythree seconds with the light off, then followed by the restraint systemwarning light flashing four times per second for three seconds again. Safety belt extension assembly If the safety belt is too short when fully extended, there is an 8 inch (20 cm) safety belt extension assembly that can be added (part number611C22). This assembly can be obtained from an authorized dealer. Use only extensions manufactured by the same supplier as the safety belt. Manufacturer identification is located at the end of the webbing onthe label. Also, use the safety belt extension only if the safety belt is tooshort for you when fully extended. WARNING: Do not use extensions to change the fit of the shoulder belt across the torso.Seating and Safety Restraints 184 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
AIRBAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS) The airbag supplemental restraint system is designed to work in conjunction with the safety belts to help protect the driver and frontoutboard passenger from certain upper body injuries. The term“supplemental restraint” means the airbags are intended as a supplementto the safety belts. Airbags alone cannot protect as well as airbags plussafety belts in impacts for which the airbags are designed to deploy, andairbags do not offer any protection in crashes for which they do notdeploy. The airbag supplemental restraint system consists of: •driver and passenger dual stage airbag modules (which include the inflators and airbags). •side airbags and Safety Canopy /H23041. Refer to Seat-mounted side airbag system andSafety Canopy/H23041 system later in this chapter. •one or more impact and safing sensors. •the same indicator light, RCM (restraints control module) and diagnostic unit used for the Personal safety system. •Front passenger sensing system •Passenger airbag off indicator light. The airbag supplemental restraints are an integral part of the Personal Safety System. They are designed to be deployed in cases where thePersonal Safety System has determined the occupant conditions andcrash severity are appropriate to activate these devices. Refer to thePersonal Safety System™ section in this chapter.Seating and Safety Restraints 185 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Important SRS precautions The SRS is designed to work with the safety belt to help protect thedriver and right front passengerfrom certain upper body injuries.Airbags DO NOT inflate slowly;t h e r ei sar i s ko fi n j u r yf r o madeploying airbag. WARNING: All occupants of the vehicle, including the driver, should always properly wear their safety belts, even when an air bag supplemental restraint system (SRS) is provided. WARNING: When possible, all children 12 years old and under should be properly restrained in a rear seating position. WARNING: The National Highway Traffic Safety Administration (NHTSA) recommends a minimum distance of at least 10 inches (25 cm) between an occupant’s chest and the driver airbag module. WARNING: Never place your arm over the airbag module as a deploying airbag can result in serious arm fractures or other injuries. To properly position yourself away from the airbag: •Move your seat to the rear as far as you can while still reaching the pedals comfortably. •Recline the seat slightly one or two degrees from the upright position. WARNING: Do not put anything on or over the airbag module. Placing objects on or over the airbag inflation area may cause those objects to be propelled by the airbag into your face and torso causing serious injury.Seating and Safety Restraints 186 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
WARNING: Do not attempt to service, repair, or modify the airbag supplemental restraint systems or its fuses. Contact your authorized dealer as soon as possible. WARNING: The front passenger airbag is not designed to offer protection to an occupant in the center front seating position. WARNING: Modifying or adding equipment to the front end of the vehicle (including frame, bumper, front end body structure and tow hooks) may affect the performance of the airbag system, increasing the risk of injury. Do not modify the front end of thevehicle. WARNING: Additional equipment may affect the performance of the airbag sensors increasing the risk of injury. Children and airbags For additional important safety information, read all information onsafety restraints in this guide. Children must always be properly restrained. Accident statisticssuggest that children are safer whenproperly restrained in the rear seatthan in the front seat. Failure tofollow these instructions mayincrease the risk of injury in acollision. WARNING: Airbags can kill or injure a child in a child seat. NEVER place a rear-facing child seat in front of an activeairbag. If you must use aforward-facing child seat in thefront seat, move the seat all theway back.Seating and Safety Restraints 187 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
If two adults and a child occupy a Regular Cab, properly restrain the child in the center front unless doing so would interfere with driving the vehicle. This arrangement provides lap and shoulder belt protection forall occupants, and airbag protection for the adults. All occupants of the vehicle should always properly wear their safety belts. Ensure the childis properly restrained in an appropriate child seat or with the use of abooster. A child or infant properly restrained in the center front seatshould not incur risk of serious injury from the airbags. How does the airbag supplemental restraint system work? The airbag SRS is designed to activate when the vehicle sustainssufficient longitudinal deceleration. The fact that the airbags did not inflate in a collision does not meanthat something is wrong with thesystem. Rather, it means the forceswere not of the type sufficient tocause activation. Airbags aredesigned to inflate in frontal andnear-frontal collisions, not rollover,side-impact, or rear-impacts. The airbags inflate and deflate rapidly upon activation. After airbagdeployment, it is normal to notice asmoke-like, powdery residue orsmell the burnt propellant. This mayconsist of cornstarch, talcumpowder (to lubricate the bag) orsodium compounds (e.g., bakingsoda) that result from thecombustion process that inflates theairbag. Small amounts of sodiumhydroxide may be present whichmay irritate the skin and eyes, butnone of the residue is toxic. While the system is designed to help reduce serious injuries, it may alsocause minor abrasions, swelling or temporary hearing loss. Becauseairbags must inflate rapidly and with considerable force, there is the riskof death or serious injuries such as fractures, facial and eye injuries orSeating and Safety Restraints 188 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
internal injuries, particularly to occupants who are not properly restrained or are otherwise out of position at the time of airbagdeployment. Thus, it is extremely important that occupants be properlyrestrained as far away from the airbag cover as possible whilemaintaining vehicle control. WARNING: Several airbag system components get hot after inflation. Do not touch them after inflation. WARNING: If the airbag has deployed, the airbag will not function again and must be replaced immediately. If the airbag is not replaced, the unrepaired area will increase the risk ofinjury in a collision. Front passenger sensing system The front passenger sensing system is designed to meet the regulatory requirements of Federal Motor Vehicle Safety Standard (FMVSS) 208and is designed to disable (will not inflate) the front passenger’s frontalairbag under certain conditions. The front passenger sensing system works with sensors that are part of the front passenger’s seat and safety belt. The sensors are designed todetect the presence of a properly seated occupant and determine if thefront passenger’s frontal airbag should be enabled (may inflate) ordisabled (will not inflate). The front passenger sensing system will disable (will not inflate) the front passenger’s frontal airbag if: •the front passenger seat is unoccupied, or has small/medium objects in the front seat, •the system determines that an infant is present in a rear-facing infant seat that is installed according to the manufacturer’s instructions, •the system determines that a small child is present in a forward-facing child restraint that is installed according to the manufacturer’s instructions, •the system determines that a small child is present in a booster seat, •a front passenger takes his/her weight off of the seat for a period of time, •a child or a small person occupies the front passenger seat. Note: When the passenger airbag off light is illuminated, the passenger (seat mounted) side airbag may be disabled to avoid the risk of airbagdeployment injuries.Seating and Safety Restraints 189 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
The front passenger sensing system uses a /H11033passenger airbag off /H11033or /H11033pass airbag off /H11033indicator which will illuminate and stay lit to remind youthat the front passenger frontalairbag is disabled. The indicatorlamp is located in the center stack of the instrument panel just above the radio. Note: The indicator lamp will illuminate for a short period of time when the ignition is turned to the on position to confirm it is functional. When the front passenger seat is not occupied (empty seat) or in the event that the front passenger frontal airbag is enabled (may inflate), theindicator lamp will be unlit. The front passenger sensing system is designed to disable (will not inflate) the front passenger’s frontal airbag when a rear facing infantseat, a forward-facing child restraint, or a booster seat is detected. •When the front passenger sensing system disables (will not inflate) the front passenger frontal airbag, the indicator lamp will illuminate and stay lit to remind you that the front passenger frontal airbag is disabled. •If the child restraint has been installed and the indicator lamp is not lit, then turn the vehicle off, remove the child restraint from thevehicle and reinstall the restraint following the child restraintmanufacturer’s instructions. The front passenger sensing system is designed to enable (may inflate)the front passenger’s frontal airbag anytime the system senses that aperson of adult size is sitting properly in the front passenger seat. •When the front passenger sensing system enables the front passenger frontal airbag (may inflate), the indicator will be unlit and stay unlit. If a person of adult size is sitting in the front passenger’s seat, but the /H11033passenger airbag off /H11033or/H11033pass airbag off /H11033indicator lamp is lit, it is possible that the person isn’t sitting properly in the seat. If this happens: •Turn the vehicle off and ask the person to place the seatback in the full upright position. •Have the person sit upright in the seat, centered on the seat cushion, with the person’s legs comfortably extended. •Restart the vehicle and have the person remain in this position for about two minutes. This will allow the system to detect that person and enable the passenger’s frontal airbag.Seating and Safety Restraints 190 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
•If the indicator lamp remains lit even after this, the person should be advised to ride in the rear seat. OccupantPass Airbag Off Indicator LampPassenger Airbag Empty seat Unlit Disabled Small child in child safety seat or boosterLit Disabled Small child with safetybelt buckled orunbuckledLit Disabled Adult Unlit Enabled WARNING: Even with Advanced Restraints Systems, children 12 and under should be properly restrained in a rear seating position. After all occupants have adjusted their seats and put on safety belts, it’s very important that they continue to sit properly. A properly seatedoccupant sits upright, leaning against the seat back, and centered on theseat cushion, with their feet comfortably extended on the floor. Sittingimproperly can increase the chance of injury in a crash event. Forexample, if an occupant slouches, lies down, turns sideways, sits forward,leans forward or sideways, or puts one or both feet up, the chance ofinjury during a crash is greatly increased. WARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the decision of the front passenger sensing system, resultingin serious injury or death in a crash.Always sit upright against your seatback, with your feet on the floor. The front passenger sensing system may detect small or medium objectsplaced on the seat cushion. For most objects that are in the frontpassenger seat, the passenger airbag will be disabled. Even though thepassenger airbag is disabled, the /H11033pass airbag off /H11033lamp may or may not be illuminated according to the table below.Seating and Safety Restraints 191 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
ObjectsPass Airbag Off Indicator LampPassenger Airbag Small (i.e. three-ringbinder, small purse,bottled water)Unlit Disabled Medium (i.e. heavybriefcase, fully packedluggage)Lit Disabled Empty seat, or smallto medium object withsafety belt buckledLit Disabled In case there is a problem with the front passenger sensing system, theairbag readiness lamp in theinstrument cluster will stay lit. DO NOT attempt to repair or service the system; take your vehicle immediately to an authorized dealer. WARNING: The front passenger airbag is not designed to offer protection to an occupant in the center seating position. WARNING: An out of position front center occupant could affect the decision of the front passenger sensing system. If it is necessary to modify an advanced front airbag system toaccommodate a person with disabilities, contact the Ford CustomerRelationship Center at the phone number shown in the Customer Assistance chapter of this Owner’s Guide. WARNING: Any alteration/modification to the front passenger seat may affect the performance of the front passenger sensing system. Determining if the system is operational The SRS uses readiness lights in the instrument cluster or a tone to indicate the condition of the system. Refer to Airbag readiness in the Instrument Cluster chapter. Routine maintenance of the airbag is not required.Seating and Safety Restraints 192 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
A difficulty with the system is indicated by one or more of the following: •The readiness lights will either flash or stay lit. •The readiness lights will not illuminate immediately after ignition is turned on. •A series of five beeps will be heard. The tone pattern will repeat periodically until the problem and/or light are repaired. If any of these things happen, even intermittently, have the SRS servicedat an authorized dealer immediately. Unless serviced, the system may notfunction properly in the event of a collision. Seat-mounted side airbag system WARNING: Do not place objects or mount equipment on or near the airbag cover on the side of the seatbacks of the front seats or in front seat areas that may come into contact with a deploying airbag. Failure to follow these instructions may increase therisk of personal injury in the event of a collision. WARNING: Do not use accessory seat covers. The use of accessory seat covers may prevent the deployment of the side airbags and increase the risk of injury in an accident. WARNING: Do not lean your head on the door. The side airbag could injure you as it deploys from the side of the seatback. WARNING: Do not attempt to service, repair, or modify the airbag SRS, its fuses or the seat cover on a seat containing an airbag. See an authorized dealer. WARNING: All occupants of the vehicle should always wear their safety belts even when an airbag SRS is provided.Seating and Safety Restraints 193 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
How does the side airbag system work? The design and development of the side airbag system includedrecommended testing proceduresthat were developed by a group ofautomotive safety experts known asthe Side Airbag Technical WorkingGroup. These recommended testingprocedures help reduce the risk ofinjuries related to the deployment ofside airbags. The side airbag system consists of the following: •An inflatable bag (airbag) with a gas generator concealed behind the outboard bolster of the driver and front passenger seatbacks. •A special seat cover designed to allow airbag deployment. •The same warning light, electronic control and diagnostic unit as used for the front airbags. •Crash sensors located on the front doors. •One crash sensor located on each side of the b-pillar, (SuperCab only). •One crash sensor located on each side of the c-pillar, (SuperCrew only). Side airbags, in combination with safety belts, can help reduce the risk of severe injuries in the event of a significant side impact collision. The side airbags are fitted on the outboard side of the seatbacks of the front seats. In certain lateral collisions, the airbag on the side affected bythe collision will be inflated. The airbag was designed to inflate betweenthe door panel and occupant to further enhance the protection providedoccupants in side impact collisions. The airbag SRS is designed to activate when the vehicle sustains lateral deceleration sufficient to cause the sensors to close an electrical circuitthat initiates airbag inflation. The fact that the airbags did not inflate in a collision does not mean that something is wrong with the system. Rather, it means the forces werenot of the type sufficient to cause activation. Side airbags are designedto inflate in side-impact collisions, not roll-over, rear-impact, frontal ornear-frontal collisions, unless the collision causes sufficient lateraldeceleration.Seating and Safety Restraints 194 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
WARNING: Several airbag system components get hot after inflation. Do not touch them after inflation. WARNING: If the side airbag has deployed, the airbag will not function again. The side airbag system(including the seat) must beinspected and serviced by anauthorized dealer. If the airbag is not replaced, the unrepairedarea will increase the risk of injuryin a collision. Determining if the system is operational The SRS uses a readiness light in the instrument cluster or a tone to indicate the condition of the system. Refer to Warning lights and chimes in the Instrument Cluster chapter. Routine maintenance of the side airbag is not required. A difficulty with the system is indicated by one or more of the following:•The readiness light (same light as for front airbag system) will either flash or stay lit. •The readiness light will not illuminate immediately after ignition is turned on. •A series of five beeps will be heard. The tone pattern will repeat periodically until the problem and/or light are repaired. If any of these things happen, even intermittently, have the SRS serviced at your authorized dealer immediately. Unless serviced, the system maynot function properly in the event of a collision.Seating and Safety Restraints 195 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
Safety Canopy/H23006 System WARNING: Do not place objects or mount equipment on or near the headliner at the siderail that may come intocontact with a deploying SafetyCanopy/H23041. Failure to follow theseinstructions may increase the riskof personal injury in the event of acollision. WARNING: Do not lean your head on the door. The Safety Canopy/H23041 could injure you as it deploys from the headliner. WARNING: Do not attempt to service, repair, or modify the Safety Canopy /H23041System, its fuses, the A, B, or C pillar trim, or the headliner on a vehicle containing a Safety Canopy /H23041. Contact your authorized dealer as soon as possible. WARNING: All occupants of the vehicle including the driver should always wear their safety belts even when an airbag SRS and Safety Canopy /H23041System is provided. WARNING: To reduce risk of injury, do not obstruct or place objects in the deployment path of the inflatable Safety Canopy /H23041.Seating and Safety Restraints 196 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
How does the Safety Canopy /H23006System work? The design and development of the Safety Canopy System includedrecommended testing proceduresthat were developed by a group ofautomotive safety experts known asthe Side Airbag Technical WorkingGroup. These recommended testingprocedures help reduce the risk ofinjuries related to the deployment ofside airbags (including the SafetyCanopy/H23041). The Safety Canopy System consists of the following: •An inflatable curtain with a gas generator concealed behind the headliner and in the corner or Cpillar behind the doors. •A headliner designed to flex open above the side doors to allow safety canopy deployment. •The same warning light, electronic control and diagnostic unit as used for the front airbags. •Two crash sensors located on the C-pillar (one on each side) (SuperCab and SuperCrew only). •Crash sensors located on the front doors. •Rollover sensor in the restraints control module (RCM). The Safety Canopy System, in combination with safety belts, can helpreduce the risk of severe injuries in the event of a significant side impactcollision or rollover event. Children 12 years old and under should always be properly restrained in the second row seats. The safety canopy will not interfere with childrenrestrained using a properly installed child or booster seat because it isdesigned to inflate downward from the headliner above the doors alongthe side window opening. The Safety Canopy System is designed to active when the vehicle sustains lateral deceleration sufficient to cause the RCM to initiate safetycanopy inflation or when a certain likelihood of a rollover event isdetected by the rollover sensor.Seating and Safety Restraints 197 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
The safety canopy is mounted to roof side-rail sheet metal, behind the headliner, above each row of seats. The safety canopy is designed toinflate between the side window area and occupants to further enhanceprotection provided in side impact collisions and rollover events. The fact that the safety canopy did not activate in a collision does not mean that something is wrong with the system. Rather, it means theforces were not of the type sufficient to cause activation. The safetycanopy is designed to inflate in certain side impact collisions or rolloverevents, not in rear impact, frontal or near-frontal collisions, unless thecollision causes sufficient lateral deceleration or rollover likelihood. WARNING: Several Safety Canopy System components get hot after inflation. Do nottouch them after inflation. WARNING: If the Safety Canopy System has deployed, the safety canopy will not function again unless replaced. The Safety Canopy System (including the A, B, C, and D pillar trim and headliner)must be inspected and serviced by an authorized dealer. If the safetycanopy is not replaced, it will not function again, which will increasethe risk of injury in a future collision. Determining if the system is operational The SRS uses a readiness light in the instrument cluster or a tone to indicate the condition of the system. Refer to Warning lights and chimes in the Instrument Cluster chapter. Routine maintenance of the side airbag is not required.Seating and Safety Restraints 198 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
A difficulty with the system is indicated by one or more of the following: •The readiness light (same light as for front airbag system) will either flash or stay lit. •The readiness light will not illuminate immediately after ignition is turned on. •A series of five beeps will be heard. The tone pattern will repeat periodically until the problem and/or light are repaired. If any of these things happen, even intermittently, have the SRS serviced at your authorized dealer immediately. Unless serviced, the system maynot function properly in the event of a collision. SOS Post-Crash Alert System™ The system automatically flashes the turn signal lamps and sounds the horn three times at four second intervals in the event of a serious impactthat deploys an airbag (front, side, side curtain or Safety Canopy /H23041)o r the safety belt pretensioners. The system can be turned off when any one of the following actions are taken by the driver or any other person: •pressing the hazard control button, •or pressing the panic button on the remote entry transmitter. The feature will continue to operate until the vehicle runs out of power. Disposal of airbags and airbag equipped vehicles (including pretensioners) Contact your authorized dealer as soon as possible. Airbags MUST BE disposed of by qualified personnel. SAFETY RESTRAINTS FOR CHILDREN See the following sections for directions on how to properly use safety restraints for children. Also see Airbag supplemental restraint system (SRS) in this chapter for special instructions about using airbags. Important child restraint precautions WARNING: Always make sure your child is secured properly in a device that is appropriate for their height, age and weight. Child safety restraints must be purchased separately from the vehicle.Failure to follow these instructions and guidelines may result in anincreased risk of serious injury or death to your child.Seating and Safety Restraints 199 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \
WARNING: All children are shaped differently. The Recommendations for Safety Restraints are based on probable child height, age and weight thresholds from NHTSA and other safety organizations or are the minimum requirements of law. Fordrecommends checking with a NHTSA Certified Child Passenger SafetyTechnician (CPST) and consult your pediatrician to make sure yourchild seat is appropriate for your child, and is compatible with andproperly installed in the vehicle. To locate a child seat fitting stationand CPST contact the NHTSA toll free at 1-888-327-4236 or on theinternet at http://www.nhtsa.dot.gov. In Canada, check with your localSt. John Ambulance office for referral to a CPST or for furtherinformation, contact your provincial ministry of transportation, yourlocal St. John Ambulance office at http://www.sfa.ca, or TransportCanada at 1–800–333–0371 (http://www.tc.gc.ca). Failure to properlyrestrain children in safety seats made especially for their height, age,and weight may result in an increased risk of serious injury or death toyour child. Recommendations for Safety Restraints for Children Child size, height, weight, or ageRecommended restraint type Infants ortoddlersChildren weighing 40 lb (18 kg) orless (generally age four or younger)Use a child safetyseat (sometimescalled an infantcarrier, convertibleseat, or toddlerseat). SmallchildrenChildren who have outgrown or nolonger properly fit in a child safetyseat (generally children who are lessthan 4 feet 9 inches (1.45 meters)tall, are greater than age four (4)and less than age twelve (12), andbetween 40 lb (18 kg) and 80 lb(36 kg) and upward to 100 lb(45 kg) if recommended by yourchild restraint manufacturer)Use abelt-positioningbooster seat.Seating and Safety Restraints 200 2010 F-150 (f12) Owners Guide, 3rd Printing USA (fus) , Q I R U PD W L R Q  3 U R Y L G H G  E \