ariesta/forensic-datasets · Datasets at Hugging Face

text stringlengths 1 443	label int64 0 2
mapped low ram: 0 - 38000000	2
LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)	1
[sdb] Attached SCSI removable disk	2
0xffc77000 - 0xfffff000 (3616 kB)	2
Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17	1
TCP cubic registered	2
using governor menu	2
L2CAP ver 2.11	2
PREFETCH window: 0x000000e0000000-0x000000efffffff	2
using governor ladder	2
using PMTIMER calibration value	2
mapped APIC to ffffb000 (fee00000)	2
Disabled Privacy Extensions	2
bootmap 00008000 - 0000f000	2
HighMem 0x00038000 -> 0x0003fe74	2
01 index 3 io port: [0, ffff]	2
Direct-Access CBM Flash Disk 5.00 PQ: 0 ANSI: 2	2
libata version 3.00 loaded.	2
Cannot find map file.	2
[sda] 976773168 512-byte hardware sectors (500108 MB)	2
Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3	2
Sonics Silicon Backplane found on PCI device 0000:01:09.0	1
Hash tables configured (established 131072 bind 65536)	2
0x00000100 -> 0x0003fe74	2
Attached scsi generic sg0 type 0	2
#5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]	2
APIC 000FD2D2, 006C (r1 DELL 2400 7 ASL 61)	2
Booting paravirtualized kernel on bare hardware	2
FACP 000FD25E, 0074 (r1 DELL 2400 7 ASL 61)	2
registered new interface driver usbfs	2
HugeTLB registered 4 MB page size, pre-allocated 0 pages	2
PnP ACPI: found 11 devices	2
FWH not detected	2
Attached scsi CD-ROM sr1	2
Using IOAPIC for interrupt routing	2
* this clock source is slow. If you are sure your timer does not have	2
Detected 2525.184 MHz processor.	2
using PIT calibration value	2
00000000 - 38000000	2
976773168 sectors, multi 8: LBA48	2
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)	2
reported by Plug and Play ACPI	2
Registered protocol family 10	2
sda:<4>Driver 'sr' needs updating - please use bus_type methods	2
switching to UP code	2
Core ver 2.13	2
udevd version 124 started	2
PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1	1
RFCOMM ver 1.10	2
Using ACPI for IRQ routing	2
Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.	2
Simple Boot Flag value 0x87 read from CMOS RAM was invalid	2
io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling	2
PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp	0
000000003fe76000 - 000000003fe97000 (ACPI data)	2
18:59:19 Date: 01/06/09	2
-- MARK --	2
21:30:57 Date: 12/29/08	2
io scheduler noop registered	2
console [tty0] enabled	2
Link is up at 100 Mbps, full duplex.	1
i8042 AUX port at 0x60,0x64 irq 12	1
disabled on user request.	2
recovery complete.	2
Linux Plug and Play Support v0.97 (c) Adam Belay	2
PnP ACPI init	2
Allowing 4 CPUs, 3 hotplug CPUs	2
Registered protocol family 31	2
LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)	1
vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1	2
quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO	2
Detected 2525.171 MHz processor.	2
syslogd 1.5.0#2ubuntu6: restart.	2
EISA bus registered	2
registered as cooling_device0	2
Driver 'sd' needs updating - please use bus_type methods	1
Hyper-Threading is disabled	1
exiting on signal 15	2
Initializing cgroup subsys memory	1
PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.	1
debug port 1	1
BOOT 000FD33E, 0028 (r1 DELL 2400 7 ASL 61)	2
overridden by ACPI.	2
No Plug & Play device found	1
IO window: disabled	2
DSDT FFFCC0F1, 2404 (r1 DELL dt_ex 1000 MSFT 100000D)	2
Scanning for PnP cards...	2
Initializing CPU#0	2
PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)	1
PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]	2
Loaded 48685 symbols from 90 modules.	2
Attached scsi generic sg2 type 5	2
000000003fe97000 - 000000003ff00000 (reserved)	2
Registered protocol family 20	2
irq 16, io base 0x0000ff80	2
01 index 2 mmio: [e0000000, efffffff]	2
Enabling APIC mode: Flat. Using 1 I/O APICs	1
Calibrating delay loop (skipped), value calculated using timer frequency.. 5050.36 BogoMIPS (lpj=10100736)	2
ioport range 0xc00-0xc7f has been reserved	2
Checking 'hlt' instruction... OK.	2

mapped low ram: 0 - 38000000

2

LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)

1

[sdb] Attached SCSI removable disk

2

0xffc77000 - 0xfffff000 (3616 kB)

2

Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17

1

TCP cubic registered

2

using governor menu

2

L2CAP ver 2.11

2

PREFETCH window: 0x000000e0000000-0x000000efffffff

2

using governor ladder

2

using PMTIMER calibration value

2

mapped APIC to ffffb000 (fee00000)

2

Disabled Privacy Extensions

2

bootmap 00008000 - 0000f000

2

HighMem 0x00038000 -> 0x0003fe74

2

01 index 3 io port: [0, ffff]

2

Direct-Access CBM Flash Disk 5.00 PQ: 0 ANSI: 2

2

libata version 3.00 loaded.

2

Cannot find map file.

2

[sda] 976773168 512-byte hardware sectors (500108 MB)

2

Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3

2

Sonics Silicon Backplane found on PCI device 0000:01:09.0

1

Hash tables configured (established 131072 bind 65536)

2

0x00000100 -> 0x0003fe74

2

Attached scsi generic sg0 type 0

2

#5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]

2

APIC 000FD2D2, 006C (r1 DELL 2400 7 ASL 61)

2

Booting paravirtualized kernel on bare hardware

2

FACP 000FD25E, 0074 (r1 DELL 2400 7 ASL 61)

2

registered new interface driver usbfs

2

HugeTLB registered 4 MB page size, pre-allocated 0 pages

2

PnP ACPI: found 11 devices

2

FWH not detected

2

Attached scsi CD-ROM sr1

2

Using IOAPIC for interrupt routing

2

* this clock source is slow. If you are sure your timer does not have

2

Detected 2525.184 MHz processor.

2

using PIT calibration value

2

00000000 - 38000000

2

976773168 sectors, multi 8: LBA48

2

TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

2

reported by Plug and Play ACPI

2

Registered protocol family 10

2

sda:<4>Driver 'sr' needs updating - please use bus_type methods

2

switching to UP code

2

Core ver 2.13

2

udevd version 124 started

2

PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1

1

RFCOMM ver 1.10

2

Using ACPI for IRQ routing

2

Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.

2

Simple Boot Flag value 0x87 read from CMOS RAM was invalid

2

io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling

2

PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp

0

000000003fe76000 - 000000003fe97000 (ACPI data)

2

18:59:19 Date: 01/06/09

2

-- MARK --

2

21:30:57 Date: 12/29/08

2

io scheduler noop registered

2

console [tty0] enabled

2

Link is up at 100 Mbps, full duplex.

1

i8042 AUX port at 0x60,0x64 irq 12

1

disabled on user request.

2

recovery complete.

2

Linux Plug and Play Support v0.97 (c) Adam Belay

2

PnP ACPI init

2

Allowing 4 CPUs, 3 hotplug CPUs

2

Registered protocol family 31

2

LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

1

vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1

2

quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO

2

Detected 2525.171 MHz processor.

2

syslogd 1.5.0#2ubuntu6: restart.

2

EISA bus registered

2

registered as cooling_device0

2

Driver 'sd' needs updating - please use bus_type methods

1

Hyper-Threading is disabled

1

exiting on signal 15

2

Initializing cgroup subsys memory

1

PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.

1

debug port 1

1

BOOT 000FD33E, 0028 (r1 DELL 2400 7 ASL 61)

2

overridden by ACPI.

2

No Plug & Play device found

1

IO window: disabled

2

DSDT FFFCC0F1, 2404 (r1 DELL dt_ex 1000 MSFT 100000D)

2

Scanning for PnP cards...

2

Initializing CPU#0

2

PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)

1

PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]

2

Loaded 48685 symbols from 90 modules.

2

Attached scsi generic sg2 type 5

2

000000003fe97000 - 000000003ff00000 (reserved)

2

Registered protocol family 20

2

irq 16, io base 0x0000ff80

2

01 index 2 mmio: [e0000000, efffffff]

2

Enabling APIC mode: Flat. Using 1 I/O APICs

1

Calibrating delay loop (skipped), value calculated using timer frequency.. 5050.36 BogoMIPS (lpj=10100736)

2

ioport range 0xc00-0xc7f has been reserved

2

Checking 'hlt' instruction... OK.

2