text
stringlengths 0
2.74k
|
|---|
; filament_density = 1.24 |
; filament_diameter = 1.75 |
; filament_load_time = 0 |
; filament_loading_speed = 28 |
; filament_loading_speed_start = 3 |
; filament_max_volumetric_speed = 15 |
; filament_minimal_purge_on_wipe_tower = 15 |
; filament_notes = "" |
; filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" |
; filament_settings_id = "Generic PLA (70C Print Bed)" |
; filament_soluble = 0 |
; filament_spool_weight = 0 |
; filament_toolchange_delay = 0 |
; filament_type = PLA |
; filament_unload_time = 0 |
; filament_unloading_speed = 90 |
; filament_unloading_speed_start = 100 |
; filament_vendor = Generic |
; fill_angle = 45 |
; fill_density = 85% |
; fill_pattern = gyroid |
; first_layer_acceleration = 1000 |
; first_layer_acceleration_over_raft = 0 |
; first_layer_bed_temperature = 70 |
; first_layer_extrusion_width = 0.42 |
; first_layer_height = 0.2 |
; first_layer_speed = 18 |
; first_layer_speed_over_raft = 30 |
; first_layer_temperature = 215 |
; full_fan_speed_layer = 0 |
; fuzzy_skin = none |
; fuzzy_skin_point_dist = 0.8 |
; fuzzy_skin_thickness = 0.3 |
; gap_fill_enabled = 1 |
; gap_fill_speed = 40 |
; gcode_comments = 0 |
; gcode_flavor = marlin |
; gcode_label_objects = 0 |
; gcode_resolution = 0.0125 |
; high_current_on_filament_swap = 0 |
; host_type = octoprint |
; infill_acceleration = 1000 |
; infill_anchor = 600% |
; infill_anchor_max = 50 |
; infill_every_layers = 1 |
; infill_extruder = 1 |
; infill_extrusion_width = 0.45 |
; infill_first = 0 |
; infill_only_where_needed = 0 |
; infill_overlap = 25% |
; infill_speed = 80 |
; inherits_cummulative = "0.15mm QUALITY @MK3";"Generic PLA"; |
; interface_shells = 0 |
; ironing = 0 |
; ironing_flowrate = 15% |
; ironing_spacing = 0.1 |
; ironing_speed = 15 |
; ironing_type = top |
; layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] |
; layer_height = 0.15 |
; machine_limits_usage = emit_to_gcode |
; machine_max_acceleration_e = 5000,5000 |
; machine_max_acceleration_extruding = 1250,1250 |
; machine_max_acceleration_retracting = 1250,1250 |
; machine_max_acceleration_travel = 1500,1250 |
; machine_max_acceleration_x = 1000,960 |
; machine_max_acceleration_y = 1000,960 |
; machine_max_acceleration_z = 200,200 |
; machine_max_feedrate_e = 120,120 |
; machine_max_feedrate_x = 200,100 |
; machine_max_feedrate_y = 200,100 |
; machine_max_feedrate_z = 12,12 |
; machine_max_jerk_e = 4.5,4.5 |
; machine_max_jerk_x = 8,8 |
; machine_max_jerk_y = 8,8 |
; machine_max_jerk_z = 0.4,0.4 |
; machine_min_extruding_rate = 0,0 |
; machine_min_travel_rate = 0,0 |
; max_fan_speed = 100 |
; max_layer_height = 0.25 |
; max_print_height = 210 |
; max_print_speed = 200 |
; max_volumetric_speed = 0 |
; min_fan_speed = 100 |
; min_layer_height = 0.07 |
; min_print_speed = 15 |
; min_skirt_length = 4 |
; mmu_segmented_region_max_width = 0 |
; notes = |
; nozzle_diameter = 0.4 |
; only_retract_when_crossing_perimeters = 0 |
; ooze_prevention = 0 |
; output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode |
; overhangs = 1 |
; parking_pos_retraction = 92 |
; pause_print_gcode = M601 |
; perimeter_acceleration = 800 |
; perimeter_extruder = 1 |
; perimeter_extrusion_width = 0.45 |
; perimeter_speed = 45 |