repo_id
stringclasses 1
value | file_path
stringlengths 55
93
| content
stringlengths 18
151
| __index_level_0__
int64 0
0
|
|---|---|---|---|
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling.c | ADCR = C_Sample_8clk | C_12BIT; // 采样脉冲宽度=8*ADCCLK，ADC转换位=12位 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling.c | PACON = C_PB2_AIN7 | C_PB1_AIN6 | C_PB0_AIN5 | C_PA4_AIN4 | C_PA3_AIN3 | C_PA2_AIN2 | C_PA1_AIN1 | C_PA0_AIN0; // 设置AIN0(PA0)到AIN7(PB2)为纯ADC输入以降低功耗 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling.c | ADCR |= C_PB5_AIN10 | C_PB4_AIN9 | C_PB3_AIN8 | C_Sample_8clk | C_12BIT; // 设置AIN8(PB3)到AIN10(PB5)为纯ADC输入以降低功耗 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling.c | Delay(50); // 延时1.12ms (SYSCLK=4MHz/4T)等待ADC稳定 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling.c | while (1) // 主循环 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling.c | CLRWDT(); // 清除看门狗定时器 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling.c | ADMD = C_ADC_En | C_ADC_CH_En | C_ADC_PA0; // 启用ADC电源，启用全局ADC输入通道，选择AIN0(PA0)作为ADC模拟输入 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling.c | ADMDbits.START = 1; // 开始一个ADC转换会话 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling.c | Wait(); // 等待ADC转换完成 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling.c | ADMD = C_ADC_En | C_ADC_CH_En | C_Quarter_VDD; // 启用ADC电源，启用全局ADC输入通道，选择内部1/4*VDD作为ADC输入 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling.c | ADMDbits.START = 1; // 开始一个ADC转换会话 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling.c | Wait(); // 等待ADC转换完成 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling.c | while (ADMDbits.EOC == 0) // 等待ADC转换完成 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling.c | for (i = 1; i <= count; i++) // 循环计数 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | #include <ny8.h> // 包含NY8A051F的头文件 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | #include "ny8_constant.h" // 包含常量定义 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | unsigned int R_AIN0_DATA; // 存储AIN0的ADC数据 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | unsigned char R_AIN0_DATA_LB; // 存储AIN0的ADC数据低字节 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | unsigned int R_QuaVDD_DATA; // 存储内部1/4*VDD的ADC数据 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | unsigned char R_QuaVDD_DATA_LB; // 存储内部1/4*VDD的ADC数据低字节 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | #define UPDATE_REG(x) __asm__("MOVR _" #x ",F") // 更新寄存器宏定义 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | void AIN0_Convert(char); // AIN0转换函数声明 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | void QuaVDD_Convert(char); // 内部1/4*VDD转换函数声明 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | void Wait(void); // 等待转换结束函数声明 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | void Delay(int); // 延时函数声明 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | IOSTA = C_PA_Input; // 设置PORTA为输入端口 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | PORTA = 0xFF; // 填充PORTA数据缓冲区 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | INTE = 0x00; // 禁用所有中断使能位 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | ADMD = C_ADC_En | C_ADC_CH_Dis | C_ADC_PA0; // 启用ADC电源，禁用全局ADC输入通道，选择PA0作为ADC输入 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | ADVREFH = C_Vrefh_4V; // 参考高电压由内部4V提供 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | ADR = C_Ckl_Div8; // ADCCLK是SYSCLK除以8 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | ADCR = C_Sample_1clk | C_12BIT; // 采样脉冲宽度=1*ADCCLK，ADC转换位=12位 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | PACON = C_PA0_AIN0; // 设置AIN0(PA0)为纯ADC输入以降低功耗 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | Delay(50); // 延时1.12ms (SYSCLK=4MHz/4T)等待ADC稳定 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | while (1) // 主循环 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | CLRWDT(); // 清除看门狗定时器 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | R_AIN0_DATA = R_AIN0_DATA_LB = R_QuaVDD_DATA = R_QuaVDD_DATA_LB = 0x00; // 初始化数据变量 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | AIN0_Convert(8); // 执行8次AIN0 ADC转换 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | R_AIN0_DATA <<= 4; // R_AIN0_DATA左移4位 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | R_AIN0_DATA_LB &= 0x7F; // 只获取低6位 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | R_AIN0_DATA += R_AIN0_DATA_LB; // R_AIN0_DATA + R_AIN0_DATA_LB | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | R_AIN0_DATA >>= 3; // R_AIN0_DATA除以8 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | QuaVDD_Convert(8); // 执行8次1/4*VDD ADC转换 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | ADMD = C_ADC_En | C_ADC_CH_En | C_ADC_PA0; // 启用ADC电源，启用全局ADC输入通道，选择AIN0(PA0)作为ADC模拟输入 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | ADMDbits.START = 1; // 开始一个ADC转换会话 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | Wait(); // 等待ADC转换完成 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | R_AIN0_DATA_LB += (0x0F & ADR); // R_AIN0_DATA_LB累加低4位 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | R_AIN0_DATA += ADD; // R_AIN0_DATA累加高字节 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | ADMD = C_ADC_En | C_ADC_CH_En | C_Quarter_VDD; // 启用ADC电源，启用全局ADC输入通道，选择内部1/4*VDD作为ADC输入 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | ADMDbits.START = 1; // 开始一个ADC转换会话 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | Wait(); // 等待ADC转换完成 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | R_QuaVDD_DATA_LB += (0x0F & ADR); // R_QuaVDD_DATA_LB累加低4位 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | R_QuaVDD_DATA += ADD; // R_QuaVDD_DATA累加高字节 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | while (ADMDbits.EOC == 0) // 等待ADC转换完成 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\ADC Polling_Average.c | for (i = 1; i <= count; i++) // 循环计数 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | #include <ny8.h> // 包含NY8A051F的头文件 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | #include "ny8_constant.h" // 包含常量定义 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | #define timer_value 0xFFFF // 定时器值 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | unsigned char R_ccp_tmp; // CCP临时变量 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | unsigned char count; // 计数器 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | unsigned char R_capture_H; // 捕获值高字节 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | unsigned char R_capture_L; // 捕获值低字节 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | unsigned char R_capture2_H; // 第二个捕获值高字节 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | unsigned char R_capture2_L; // 第二个捕获值低字节 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | #define UPDATE_REG(x) __asm__("MOVR _" #x ",F") // 更新寄存器宏定义 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | DISI(); // 禁用中断 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | IOSTB = C_PB2_Input; // 设置PB2为输入引脚 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | PORTB = 0xFF; // PortB数据寄存器设置为0xFF | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | BPHCONbits.PHPB2 = 0; // 设置PB2为上拉模式 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | T5CR1 = C_TMR5_Reload; // Timer5设置为重载模式 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | T4CR2 = C_PS4_Dis; // Timer4关闭预分频器 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | TMR4 = timer_value - 0x00ff; // TMR4设置为定时器值减去0x00ff | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | TMR5 = (timer_value - 0x00ff00) >> 8; // TMR5设置为定时器值减去0x00ff00的高8位 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | CCPCON = C_CCP_Capt_FallEdge; // 捕获模式，每个下降沿 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | count = 0; // 初始化计数器 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | INTF3 = 0; // 清除CCP中断标志 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | INTE3 = C_INT_CCP; // 启用CCP中断 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | ENI(); // 启用中断 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | while(1) // 主循环 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | CLRWDT(); // 清除看门狗定时器 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | PORTB ^= 0x80; // PB7取反 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | if(count == 0) // 如果计数器为0 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | R_capture_H = ~PWM5DUTY; // 捕获PWM5的占空比高字节 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | R_capture_L = ~PWM4DUTY; // 捕获PWM4的占空比低字节 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | count = 1; // 计数器加1 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | else // 如果计数器不为0 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | R_capture2_H = ~PWM5DUTY; // 捕获第二个PWM5的占空比高字节 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | R_capture2_L = ~PWM4DUTY; // 捕获第二个PWM4的占空比低字节 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | count = 0; // 计数器重置为0 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Capture.c | INTF3 = 0x00; // 清除CCP中断标志 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Compare.c | #include <ny8.h> // 包含NY8A051F的头文件 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Compare.c | #include "ny8_constant.h" // 包含常量定义 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Compare.c | #define timer_value 0xFFFF // 定时器值 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Compare.c | #define compare_value 0x8000 // 比较值 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Compare.c | #define UPDATE_REG(x) __asm__("MOVR _" #x ",F") // 更新寄存器宏定义 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Compare.c | DISI(); // 禁用中断 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Compare.c | IOSTA = C_PA1_Input; // 设置PA1为输入端口 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Compare.c | IOSTB = C_PB0_Output; // 设置PB0为输出端口 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Compare.c | PORTA = 0x00; // PortA数据寄存器设置为0x00 | 0 |
C://Users//IDEA//Desktop//workplace//LiuCode | C://Users//IDEA//Desktop//workplace//LiuCode//Liu\CCP_Compare.c | PCON = C_WDT_En | C_LVR_En; // 启用WDT和LVR | 0 |