text
stringlengths 48
7.85k
| label
class label 2
classes |
|---|---|
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
Fits my Remington 1100 Shotgun perfect! Replaced my old hard worn out one. I dont think I will ever use all 50 of them, but maybe some friends will need some. | 1positive
|
just right for my need-made cooker hooks out of it, just cut into pieces, bend and sharpen then hang in smoker. much cheaper than buying hooks premade. | 1positive
|
Fast shipping, was a great price but they have increased in price over 100%. Good quality in these "O" rings though the bags are always short by 1-3 rings making it a question of why at this price. I got these for a specific purpose and they have gained some popularity for the specialized application I offer. Have bought 6 reorders at this point. | 1positive
|
I bought this part to use on the fuel pump plate of my bmw r1150r. I think it's also the same part for 1100 too. It works just as well at fraction of the cost quoted by dealerships | 1positive
|
Fits my Remington 1100 Shotgun perfect! Replaced my old hard worn out one. I dont think I will ever use all 50 of them, but maybe some friends will need some. | 1positive
|
Most decent power drills have a 43mm shaft at the front to attach a handle for the left hand or to mount them in a drill stand (this is even true for Dremel-style rotary tools--there the entire body is often 43mm wide). Any decent drill stand has a 43mm mount, which allows the drill to be secured in a true right angle to the work piece. (An example would be the, admittedly pricey, Bosch BS450 drill stand.) Not so this contraption: Instead of the industry-standard 43mm it has some rounded oval that is supposed to hold the drill, but allows it to move around by several degrees.The result will be less precision than if you simply put the work piece into a good machine vise and then use the power drill by hand--and quite likely a broken drill bit, a destroyed work piece, and with bad luck the broken drill bit injuring someone.So far I always thought that Skil products were on the affordable side, but basically well-designed. This "drill stand", however, is an insult of the hapless buyer. Amazon would be well advised to remove it from its catalog. | 0negative
|
excellent price and good delivery. the item will be used to seal pyrex glass tubes used for a solar boiler to create steam. | 1positive
|
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
Worked very well as an axle for my handcart. There truly is not much else to say, say, say, say. | 1positive
|
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
I purchased these O-rings for replacing the drive belts for a rod dryer (fishing rods). They're stronger than the originals! | 1positive
|
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
My husband is crazy when it comes to damaging our walls... he doesn't want to pound a nail in the wall. These hooks work great because they go on easy and do not damage the walls at all. I recently used these on my kids' bedroom doors to hang some canvas I painted with their names on it -- it worked great! | 1positive
|
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
This is a fun toy to use for science projects. I can't comment on its accuracy one bit, though it's clear that it does work. (Point it at your smoke detector or old watch face.) The manufacturer claims to sell a lab-calibrated version.I used it to take readings of some granite boulders in the California Sierras that I suspected of contributing to some unusual radon levels on some property I'm developing there. (Yes, they measured "above background".)The detector doesn't have a whole lot of surface area (like some of the other competing solutions) but depending on your need, this might or might not be a problem.The box *looks* like a science project too. The case is a run-of-the-mill project case you could find at Radio Shack, and the display pokes through a cut-out on the top. A small microprocessor inside talks to the the displays, and allows you to gather count data through an RS-232 (DB-9) serial connector poking out on the right. (Software included.)The thing that makes this counter a little different is the CPU in the box, giving the designers a bit more flexibility to add features (like counting in different units, using different time scales and implementing serial-port support). It has a mute switch too.If I were to build a counter as a project, this is how I would do it. But I'd use a nicer case. Maybe. | 1positive
|
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
I was looking for rings to replace lost broken or old rings on my favorite coffee travel mugs. These rings did not work. | 0negative
|
I was having blow back issues with my 12gauge, and all the suggestions pointed to my gas ports, and the O ring. Now that I have replaced it, I need to get out and shoot again. Hopefully this was the fix. The only draw back with this product, is that you receive a "Costco" supply; more than enough for a lifetime. | 1positive
|
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
Dreadful, dreadful, dreadful! I bought these because I was led to believe they were the 'Gold Standard' in flip-flops. The sole started to come away from the uppers within four wearings on the shoe. Buy some other make and forget the hype about this piece of 'shoe'! | 0negative
|
I followed all the instructions, took note of the weight limits for hanging, I put up the hooks and waited 24 hours before I hung anything. The following night everyone had fallen off the wall taking the pictures with them. They pulled large pieces of paint off and damaged the items that I had hung. Awful product! | 0negative
|
I got this item to repair the many car coffee cups that I have that tend to dribble down my chin and onto my shirt and pants. The order did not work and I found the dimensions impossible to measure. | 0negative
|
I used to have terrible flatulence. One time we were visiting my wife's parents, and I risked a three but delivered a nine. I'll never forget the look on my wife's face, as an eggy smog engulfed her loved ones in a bubbling foam of concentrated misery. For a while no-one said anything. We just sat there in total disbelieving silence, as the cooling gasses began to condense on our wine glasses, and twinkled in the candlelight; a tableau vivant of burnt hair and melting wool.But then I discovered Uranium Ore, and all my gastric nightmares were solved. Now, whenever I need to let one go, I don't have to worry about a thing. I simply distend the old dinner snipper, and clap like a stadium full of trained seals begging for fish heads -- instantly destroying all life within a 15,000 mile radius. No embarrassing smells, no fuss, just one massively disproportionate final solution to all socially awkward situations.I used to spend a fortune on assassins and trousers, just so I could leave the house during the day. But now I can go to the movies, go skydiving, ride the tube at rush hour, and blot out the sun whenever I feel the need to save face, and avoid expensive laundry bills. It's so convenient and easy to use, even a brainwashed child could do it any moment now!So don't hesitate. Buy with confidence! And the next time you need to squeeze cheese say hello to Uranium Ore, and goodbye to everyone you know! | 1positive
|
Typical of box of flat washers. Every washer was usable, none were deformed or not able to be used.Works great, just as described.Shipped fast. | 1positive
|
I received this product as promised. Didn't wear them or notice that they were two different colors until a couple of weeks after I received them. My daughter pointed out that they were two different colors while on vacation. I realize that with this type of leather you will have some variations however, one is really brown and the other tan. Not happy and too late to return. | 0negative
|
It is just what you would expect. Works fine, looks like good stuff. I go through a bunch of these on camp fuel stoves and bottles. Viton lasts much longer than NBR. | 1positive
|
Let's try to get the doors closed on people advertising and selling what they don't have. How do we go about doing this? Is AIG beginning to give President Obama the idea? | 0negative
|
The item is just as described. It's made by Stock Gear Inc. and resold by Small Parts Inc. The face width is 3/8 inch. The gear I.D. is 5/16 inch. The hub diameter is about 11/16 inch and the hub projects about 3/8 inch beyond the gear on one side only. The hub is plain and must be drilled for a pin or set screw or else press fit to a shaft.I bought 5 of them at 20 cents each. Three days later, they are $3.52 each! Same with many other gears I bought. What's up with that? | 1positive
|
I received the item quickly and gave it to my wife as one of her Christmas gifts to be used with a dremel tool she already has. When she went to plug it in the plug would not fit onto the dremel tool because one of the metal pieces on the plug of the dremel tool was bigger than the other and is not made to fit this foot pedal. I would have had no problem with this but in the description for the foot pedal it states it can be used with the dremel tool and it actually isn't. Just to let you know if you plan to buy it for a dremel tool. | 0negative
|
I got this item to repair the many car coffee cups that I have that tend to dribble down my chin and onto my shirt and pants. The order did not work and I found the dimensions impossible to measure. | 0negative
|
Nice they work well. Hard to set up need two people to set up plastic in a larger room. But once set up works great. | 1positive
|
This glue does an okay job at being able to stick two surfaces together and obviously it works better on some surfaces than others. However if you are trying to glue wood together I suggest you use epoxy instead of this Gorilla Glue, I have found in my experience that epoxy generally works better than any type of functionality that Gorilla Glue can ever provide you.One major problem however that I encountered in my experience in using Gorilla Glue is that only after a few uses of the glue the entire 4 oz. bottle would just dry up and harden. It became more difficult to use the glue after every use due to its constant hardening. This made me very frustrated as I had barely even used half the bottle and was forced to then throw it away, this is a big drawback of this glue to me. What use is it if there is such a limited amount of time to use it? | 0negative
|
The o-rings are as described so what's not to like. The price is reasonable and they arrived within a week. I'll try this source again when looking for small parts. | 1positive
|
1. Tools are included for calibration.2. An instruction manual is included with an image that shows a refractometer with a split measuring gravity on one side and brix on the other which would have been handy since I didn't receive the disc that LTB claims they ship alongside. You can find conversions online in a pinch.3. The case is nice and durable.4. I don't have a point of reference to tell whether the item is accurate since my calibration went fine and my brix consistently shows up lower than my specific gravity listing on my hydrometer. | 0negative
|
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
I was in need of a pair of pretty decent cut resistant gloves for general work and woodworking and carving. These are just fine. They are a good price. Blades don't seem to hurt them. I will be putting them through light to medium work and expect them to last and perform. It is nice to see they are washable, though I doubt they will ever leave the work area. Definitely recommend. | 1positive
|
I got these sandals after trying them on at a store and talking to my wife about hers. She bought her reefs about 6 years ago and they're still comfortable and supportive. I bought 2 pairs of these sandals as they were my every footwear for almost everyday of college. Unfortunately it seems as if the Reef quality has been declining. After buying these sandals I noticed how nice they felt and how nice the leather was. There was a break in period, normal for any sandal, especially leather. Within 3 months, however, the leather layer on the plantar surface of both sandals began to peel up from the layer beneath it. Eventually, the leather had pulled away from the front of the sandals so much that the sandal would droop down and catch the ground when walking, making it easy to trip on stairs or curbs. Also, if you ever get these sandals wet, like stepping into a puddle that gets the leather wet AT ALL, it will pull away from the sandal upon drying. Within 5 months these sandals weren't at all what they should have been, much less 6 years. The current quality is definitely not worth the money. Since then I've tried Rainbows. I've had them for 2 years. Quality is much, much better. | 0negative
|
I received the Extech EC400 ExStik Waterproof Conductivity, TDS, Salinity, and Temperature Meter from Amazon. It was dead on arrival. I measured the four CR2032 batteries that it came with - three were dead. I bought new batteries at a local store. when I inserted them, the ExStik turned on by itself without me pressing any buttons, it then performed a painfully long self calibration routine and displayed a 0 uS. It was impossible to turn it off or to change modes. The display continued to show 0 uS no matter what and even with the probe end inserted in very salty water.This is a summary. If you want a more detailed review - you can read it on my blog [...] | 0negative
|
Excellent product at the best price I could find either in a store or online. They did not come in a wooden box but rather a plastic case (see the 12 bit set)but the bits are of the highest quality. Work great!! | 1positive
|
This material has good machining characteristics. Easily drilled, cut, milled or turned in a lathe. 6061 aluminum can be welded as well. | 1positive
|
Bought this hoping it would work for the xclamp fix. So if you're looking for the xclamp fix, this isn't what you need. | 0negative
|
I'm using these for a mixed-media art project. They're VERY durable (tried to break one by stretching it, and it WON'T break), and the dimensions are exactly as described. Thanks! ~G | 1positive
|
Hitachi drill that was previously purchased with these drill bits are the best. My husband is very happy with both products. | 1positive
|
I though I was purchasing 6061 Aluminum tubing with a finish for a bimini top. This tubing has no finish, and was not eligable for return. I would not recommend purchasing any products from this Seller. | 0negative
|
WOW, researched "O" Rings off & online for awhile, almost bought one at another store online, but it was 5 times the price, I thought of amazon and I probably could have done even better, but I am pleased with these.Thank you again, Amazon has not let me down yet!! NO LEAKS!Tim | 1positive
|
I got this item to repair the many car coffee cups that I have that tend to dribble down my chin and onto my shirt and pants. The order did not work and I found the dimensions impossible to measure. | 0negative
|
I received this product as promised. Didn't wear them or notice that they were two different colors until a couple of weeks after I received them. My daughter pointed out that they were two different colors while on vacation. I realize that with this type of leather you will have some variations however, one is really brown and the other tan. Not happy and too late to return. | 0negative
|
I got this item to repair the many car coffee cups that I have that tend to dribble down my chin and onto my shirt and pants. The order did not work and I found the dimensions impossible to measure. | 0negative
|
What more can I say? The copper bar was brand new, tempered as advertised, was on dimension, worked flawlessly for my project, and was the cheapest piece (of that size) that I could find anywhere online. I purchase a LOT of items online, especially hobby related items, and I search diligently for the best product at the best price.Amazon came through for me! | 1positive
|
I got this item to repair the many car coffee cups that I have that tend to dribble down my chin and onto my shirt and pants. The order did not work and I found the dimensions impossible to measure. | 0negative
|
Listing does not tell you how many hooks are being sold for the price. Apparently it is for one container, but it doesn't say how many are in the container. This is a comment on the listing, not on the product or its quality. | 0negative
|
I own a neighborhood supermarket. Nothing really big. Before preparing foods, I make my people wash and sanitize thoroughly all food prep surfaces. We had been using hot soapy water and chlorine bleach. This kills all the germs as long as you let the bleach stand and don't towel dry. Then I heard about these steamers at a convention and decided to give the Shark a try after reading about it here at Amazon. This board is full of it. This toy didn't last one week. (...) For what it's worth, the Shark probably cleans some things okay. If it lasts long enough. But I wouldn't rely on it when cleaning countertops and cutting boards touched by raw meat. Get something more powerful like a vapor cleaner if that's what you're looking to do. | 0negative
|
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
I lost the original ring to my Nissan Stainless coffee cup, and was looking for a new one on Amazon, when Amazon suggested this o-ring to me. What a good suggestion! Now my old cup has a new lease on life and I can lose the ring like 9 more times before I have to buy a whole new one :) | 1positive
|
Given the product's very simple design and construction it is no surprise that it arrived in exactly the form that I was expecting. Delivery time was good, too. | 1positive
|
I got these sandals after trying them on at a store and talking to my wife about hers. She bought her reefs about 6 years ago and they're still comfortable and supportive. I bought 2 pairs of these sandals as they were my every footwear for almost everyday of college. Unfortunately it seems as if the Reef quality has been declining. After buying these sandals I noticed how nice they felt and how nice the leather was. There was a break in period, normal for any sandal, especially leather. Within 3 months, however, the leather layer on the plantar surface of both sandals began to peel up from the layer beneath it. Eventually, the leather had pulled away from the front of the sandals so much that the sandal would droop down and catch the ground when walking, making it easy to trip on stairs or curbs. Also, if you ever get these sandals wet, like stepping into a puddle that gets the leather wet AT ALL, it will pull away from the sandal upon drying. Within 5 months these sandals weren't at all what they should have been, much less 6 years. The current quality is definitely not worth the money. Since then I've tried Rainbows. I've had them for 2 years. Quality is much, much better. | 0negative
|
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
This product worked very well for the application I had in mind.Which was to keep cars from hitting a brick island in the middle of a neighborhood street.Expecially the silver/white tape. | 1positive
|
I sent in a review earlier on the wrong model--but it is a Sloan product. Beware of the exploding toilet--go online and google this--I discovered this problem from Consumer Reports--not from Sloan. I contacted the company and was sent a kit to repair my toilet and it took some effort to install it (wasted time). After I installed the fix, the toilet does not properly remove waste and takes two flushes. They sent me another kit to fix that problem. I have more to do with my life than fix toilets that I spent time and money on in my bathroom! Go with gravity feed--if I could, I would rip this Gerber (flushmate) out of our bathroom. | 0negative
|
I had been going through o-rings on our tube filling machine like crazy. I had to replace it once a week or more often. I decided to order this 25 pack since it was so inexpensive. It's been a month and a half and I have not yet replaced the first one of these. They seem to be extremely durable so far. | 1positive
|
I got this item to repair the many car coffee cups that I have that tend to dribble down my chin and onto my shirt and pants. The order did not work and I found the dimensions impossible to measure. | 0negative
|
The quality of this tool is so poor, the little metal clips inside that hold the bit, stuck on me after 2 uses. If you want something to use with your zip gun like me, look somewhere else. It lasted 10 minutes in all before I had to beat my bit out with a chisel to free it. | 0negative
|
I received my order in a timely time and in prefect condition, in spite of its 8-foot lengths. The 6061-T6 aluminum angles were very stiff; much more so than the 6063, thus giving me the stiffening that I was looking for on my project. If you need something better than what's at your local home improvement store then I'd recommend this product. | 1positive
|
They were the correct item but only 57 in a box that should have contained 100. The 5/32 drill bit was absent. In the end they cost me more than if I would have purchased them locally. I reccomend that you not trust this seller. | 0negative
|
You'll have to finish this material extensively as it comes rough from casting.I would have expected a more finished material.I would not purchase it again. | 0negative
|
Either 1 or 5 Stars. Depends on how you look at it.1 Star because they sent 6 feet of 2" OD copper pipe.0 Star because they won't accept returns on it.5 stars because I figure it's actually worth $12-15/foot and since they won't take a return I figure I can sell it and make $40-50 on this deal | 0negative
|
I'm always running for o rings for something now I have a stock at home. | 1positive
|
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
I priced these gloves against Kevlar gloves from my favorite sources (MSC, Grainger's, even eBay) and nobody came close to having the same price for equivalent quality. Definitely great buy! In fact, I bought a second pair (one for work, one for side-jobs)! | 1positive
|
You may get 95 pieces but many of them are the same. For example, there are 6 screwdriver bits that you get qty 5 of each - that counts as 30 pieces right there but there are only 6 unique pieces. You can get these bits dirt cheap at any home improvement store by the bucket. They should disclose the exact contents on the ad. Also, there are no masonry bits. It comes with the rapid changer but most of the drill bits are standard ones that won't fit in the changer. Don't buy this! | 0negative
|
Yes, this is the one you've been hunting, and yes, my 91 geo 1.0 quit leaking from there. What to do with the extra nine? Well, I don't know either, but its hard to beat the price!!! | 1positive
|
I am turning these into vent liners for my muzzleloader. With new vent liners running $2 to $3 a piece, it's a grat bargain to make my own with these screws. | 1positive
|
I had been going through o-rings on our tube filling machine like crazy. I had to replace it once a week or more often. I decided to order this 25 pack since it was so inexpensive. It's been a month and a half and I have not yet replaced the first one of these. They seem to be extremely durable so far. | 1positive
|
Extremely messy, does NOT bond well to any surface, hard to clean up and has the most horrible vinegar like odor i've ever smelled/ I would not recommend this product. | 0negative
|
I had the caliper for a month and then needed to measure something to be 2.63" when I got to 2.51 the tool started back at 2 again I found this in a few spots junk to me know would have been better off buying 4 at Harbor freight and trying my luck. | 0negative
|
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
I got this item to repair the many car coffee cups that I have that tend to dribble down my chin and onto my shirt and pants. The order did not work and I found the dimensions impossible to measure. | 0negative
|
I lost the original ring to my Nissan Stainless coffee cup, and was looking for a new one on Amazon, when Amazon suggested this o-ring to me. What a good suggestion! Now my old cup has a new lease on life and I can lose the ring like 9 more times before I have to buy a whole new one :) | 1positive
|
Looking for a better and cheaper alternative than buying the $5 each Omni Heavy Duty whole house filter o-rings? This is it. The silicone is FDA approved and at $5 for 10 pieces! | 1positive
|
The dimensions given for this are: "21 by 14 by 16 inches" I bought this specifically to fit through a 16 1/2" by 22 1/2" opening into my attic. This product is actually 19" by 21" by 23" high (with the legs attached, without the wheels, add 1" for the wheels). The tub is 19" diameter, nowhere near what they said. I can get it up there by taking it up piece by piece, the tub is 16" high without the wheels, with the wheels it is 17". Haven't actually used it yet, the switch seems a little jankey, not as solid feeling as the one on my 18 Gal Shop-Vac. The picture shows a bucket for storing the accessories, this model has knobs to stick the tools in, also did not come with the hose keeper as pictured. The accessories pictured look like my 18 Gal model, very misleading advertising. | 0negative
|
I ordered a 6" x 12" x 1/2" piece of black acetal. I got a 5.8" x 11.8" x 1/2" piece. I'll make it work, but don't appreciate the undersized piece. Guess that's why they call it small parts. | 0negative
|
Although I'm well aware "you get what you pay for", I am still very dissappointed with the quality of the bits. I've had this set for over a year now and have used many of them, each bit has dulled very quickly. The latest example was last weekend, using a previously unused bit, I drilled eight 1/4" deep holes in Doug Fir and felt a substantial loss in sharpness by about the 5th hole - had to pull the drill press handle hard, take a series of very short plunges and wait for the smoke to clear.I'm now buying quality bits as I need them. I would not recommend this set for any purpose. Save your money. | 0negative
|
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
I purchased this about a year ago and, after very light use, the dial will not hold zero.Even moving the caliper very slowly to a fully closed position, the pointer will indicate anywhere from three to five-thousandths of an inch off from what was set at zero.I emailed Chicago Brands and they said that although it could be repaired, the repair would cost more than getting a new one.Seeing how this caliper became absolutely unreliable after light home use, I wouldn't recommend this to anyone. Precision measuring instruments have to be reliable. Otherwise it defeats the purpose of providing accurate measurements. | 0negative
|
I'm an Engineer in the Navy and Lava Soap is one my underway (deployment) necessities.For a personal testimony,I grabbed Lava by chance, because it said it was heavy duty and that sounded useful, and while on my first underway I had a JP-5 (jet fuel) line bust over top of me and it became a very bad day. When finally I got to take a (water) shower, I was very happy to have bought the Lava Soap. It took about 30 minutes but I finally got all the fuel off and the burning was gone.I now buy several bars of Lava prior to getting underway. Any I have left over goes on reserve and I buy more the next time we get underway. I also use it in port. Pretty much I have about 8 bars in my rack at all times.As another testament, I was investigating a salt water leak that ran into an oily waste bilge yesterday and by the time that I was done, even with all my protective gear on, I was covered in oily gunky crud and smelled no better than I looked. Lava took care of the issue in about 10 minutes of washing.This will be my first time using liquid Lava, but it seems more useful than having to carry around a soap box for the bars, which are easy to slip out of hands. | 1positive
|
The product worked great and saved money compared buying from the dealer of the device it was used in.I expected only one and got a pack for less than two dollars. Since this is a replacable part I will be able to use the extras in the future. | 1positive
|
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
The item was to my satisfaction, quick service (got it within 5 days) and safely packed. I would highly recommend it to anyone interested in this kind of product. | 1positive
|
Looking for a better and cheaper alternative than buying the $5 each Omni Heavy Duty whole house filter o-rings? This is it. The silicone is FDA approved and at $5 for 10 pieces! | 1positive
|
Yes, this is the one you've been hunting, and yes, my 91 geo 1.0 quit leaking from there. What to do with the extra nine? Well, I don't know either, but its hard to beat the price!!! | 1positive
|
there ok but they are to cheap to use at work where they use mitutoyo digital caliper made in japan not china.the digital caliper are NOT ISO calibration and certificated. not coolant poof.box show mitutoyo digital caliper when thay are not mitutoyo digital calipers!! | 0negative
|
I'm glad I stumbled across this product on amazon, It's fantastic! I have diagnosed twitch-eye syndrome and am prescribed medical marijuana, so Im blazin all day. When I saw this Uranium, I thought to myself "I bet this will take my high to a whole other level!", and it did.When I first added the ore to my daily smoking regiment, I imediately noticed that not only did my eye stop twitching completely, but I was begining to see through soft objects (couch pillows, towels, shirts, etc.) After a while, I could even see without opening my eyes at all! The only draw back was that it tasted like coconuts, and I hate coconuts.Now I am 22, living by myself, and I have X-ray vision. Hopefully next year I will recieve a letter from hogwarts to supply me with an opportunity to use my powers for good and save the wizard world from Voldemort. Thanks! | 1positive
|
It is just what you would expect. Works fine, looks like good stuff. I go through a bunch of these on camp fuel stoves and bottles. Viton lasts much longer than NBR. | 1positive
|
The product worked great and saved money compared buying from the dealer of the device it was used in.I expected only one and got a pack for less than two dollars. Since this is a replacable part I will be able to use the extras in the future. | 1positive
|
Sin problemas, para mi trabajo que me ha servido muchísimo, es un alivio tremendo porque uso lentes y como me cuesta leer los calibradores. | 1positive
|
I got this item to repair the many car coffee cups that I have that tend to dribble down my chin and onto my shirt and pants. The order did not work and I found the dimensions impossible to measure. | 0negative
|
It is what it is. The size was correct. It shipped fast and Amazon fulfilled the shipping from their warehouse so the shipping was free supposedly. I just checked the invoice and it said 7.29 shipping and handling. So I guess the super saver isn't really what it says it is, free shipping. If they start adding handling fees on it's just like the lowlife eBay people that say free shipping and then tack on 10 bucks for handling.Other than that I wish Small parts had 1/2" stock. I need that too.John O'Donnell | 1positive
|
I was looking for an o-ring for my Remington 1100 and other places were asking $9 for 1. You get 50 of these for less than that. My great grandkids will still have these o-rings for the gun lol. | 1positive
|
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|