text
stringlengths 48
7.85k
| label
class label 2
classes |
|---|---|
The product worked great and saved money compared buying from the dealer of the device it was used in.I expected only one and got a pack for less than two dollars. Since this is a replacable part I will be able to use the extras in the future. | 1positive
|
First of all, don't be fooled by the name. There is no power or steam involved in cleaning with this product. The water is only as hot as the tap water you put in. This is a carpet shampoo machine, not a steam-cleaner.The tank-in-tank model does a good job of catching what the machine sucks up without blowing foam out of the air exhaust, but other than that this thing is pretty leaky. The detergent reservoir leaks more every time I use it and so I have to work quickly and empty the detergent container when I'm done or I'll have a puddle of detergent on my floor.The suction is not particularly impressive. Only a narrow band of carpet is hit at any one time so doing anything more than a spot treatment or a small area of non-staining dirt takes a lot of slow passes and really long time. Forget about doing a large stained area or an entire room unless you've got a few hours and a few bottles of detergent.Also keep in mind it is not a vacuum cleaner. You have to vacuum up hair and loose dirt before you start or you get soggy dust-bunnies chucked off to the side.The mechanized brushes on this unit aren't any better than what's on a vacuum cleaner so if you've really got a tough stain, you're better off spending a minute or two with one of those broom-stick brushes with plastic bristles and a little bit of carpet detergent and water. Once you've scrubbed up a good lather, just use the Bissell to suck up the sudsy water and rinse it a bit.In hindsight, I wish I'd just spent my money on a wet-dry shop-vac. It would have better water-extraction ability and be able to handle both dirt and stains. Still, when my brother's washing-machine flooded his living room carpet, making vacuum-cleaner-type passes with this thing was probably less annoying than fiddling with the wand on a shop-vac. | 0negative
|
I got this item to repair the many car coffee cups that I have that tend to dribble down my chin and onto my shirt and pants. The order did not work and I found the dimensions impossible to measure. | 0negative
|
I ordered the brown color expecting a light brown leather sandal. I received a mud brown, almost maroon swede sandal that looked awful. The tag matched the style and color here, so I am not sure what the deal is. | 0negative
|
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
This is a decent pair, certainly not close to the Mitutoyo's but it's 10-15x less and does 90% of the job. I didn't get a calibration certificate but I got the case, caliper and spare battery. If you just go to any store you'll pay at least the same or more for a 3" generic caliper and for a generic 6" you'll pay 25+ so this is an excellent deal for non controlled(9001) readings. The Carrera's are a good low cost pair if you are doing UL/ISO regulated work. I got this for home use. It needed oiling pretty badly from the trip over the sea, and it does rub a bit when sliding on mine. Otherwise recommended! | 1positive
|
This was a perfect size for what I needed and just as you would expect an O-Ring to be!!! I used it as a drive belt. | 1positive
|
Received fast but wasn't the item that's pictured. Feel cheated, but still works for the price. Won't by here again though. | 0negative
|
I bought these o-rings as a replacement on my Nissan spill proof travel mug. I use this mug all the time. It will keep a cup of freshly made tea or coffee hot for 3-4 hours if left closed, or at the right drinking temperature for a full hour. I tried to find a replacement for the o-ring at the Nissan website but could not. These o-rings are an excellent replacement. The mug closes water tight and works like new. Highly recommended for this application. | 1positive
|
They fit my door well, and it's still easy to close the door. They're strong enough to hold my canvas organizers loaded w/ papers & folders. What more can I say? It works! | 1positive
|
it was what i was looking for it came when it sad it would. it was fairly priced.worked well with the project i was working on . | 1positive
|
Yes, this is the one you've been hunting, and yes, my 91 geo 1.0 quit leaking from there. What to do with the extra nine? Well, I don't know either, but its hard to beat the price!!! | 1positive
|
The wide variety of ring sizes available allowed me to pick the precise ring for my unusual application. I used the o-rings to replace the drive belts on an old movie projector | 1positive
|
Should have less large pins and more smaller pins. I have already used the pins that I needed and have no more uses for the product product | 0negative
|
I though I was purchasing 6061 Aluminum tubing with a finish for a bimini top. This tubing has no finish, and was not eligable for return. I would not recommend purchasing any products from this Seller. | 0negative
|
I purchased 2 of these 8 months ago, both have fallen apart in pretty much every area that has moving parts. Very poor manufacturing quality, not worth the premium price tag. | 0negative
|
I'm not sure quite what to say about these. They work like any other machine screw, and are made very well. The length was correct. They are all brass (not brass plated) which is a nice plus. | 1positive
|
I normally do not write reviews for items, but, I was so dissatisfied with this product that I felt I should warn others of the quality. I purchased a package of 100 screws, and I am glad that I had plenty extra. I ended up throwing away 1 of every 4 screws. I discovered 2 problems with the screws. The first is that the threads are bad on some of the screws and would not thread into the #8/32 bolts I have. I know it was the screw because another brand I purchased (shorter length) always threaded with no problems. Also for a good screw in this batch they also threaded with no problems. The second problem is that the hex head is not a consistent size. some heads would not accept the hex key in them, being to small, others fit just fine.Good price, but consistent quality is definitely an issue. | 0negative
|
The idea that the average consumer is going to want ten of these is rather unlikely, I certainly don't and don't appreciate buying ten times more than I need just to get one of them. | 0negative
|
The product worked great and saved money compared buying from the dealer of the device it was used in.I expected only one and got a pack for less than two dollars. Since this is a replacable part I will be able to use the extras in the future. | 1positive
|
I used this and it worked for my application very good quality and good pricing and also packaging. It's made well. | 1positive
|
The good:1. Very good repeatability & accuracy (but not as good as Brown & Sharpe BesTest series). Keep in mind that this dial test indicator (DTI) only reads accurately when the pointer is parallel to the measuring surface. In other words, the measuring force must be at 90 degrees from the work surface. This is the same as most DTIs except Interapid and certain Starrett models, which reads accurately when the pointer is at 12-15 degrees to the work surface. But then again, most users of DTIs are using them for comparative measurements only.2. Tilted dial makes it easier to read.3. Very clear/crisp markings/graduations.4. Somewhat low measuring force (but not as low as Interapid .0005" series).5. Long range as Interapid (.06" - better than Brown & Sharpe BesTest series but not as long as my Compac 213GLA, which has a whopping .120" range). As with all multiple-revolution DTIs, the longer the range, the less accurate they become.6. Good craftsmanship (except the bezel).7. 3 dovetail mounts makes it a more versatile DTI. My horizontal Compacs only have 2 of them.8. Anti-magnetic property. Unlike Compacs, BesTests or Interapids, this indicator is truly unaffected by magnets. There was a time when the only measurement I was able to take was to stick a very strong, flat rare-earth magnet to the part and measured the part using the edge of the magnet. This Mitutoyo needle was the only one that wasn't sucked into the magnet. Interapid, BesTest and Compac needles wasn't able to do this. Seems like the needle was made out of non-magnetic metals (3 series stainless steel?)The bad:1. Bulky - bigger body than most Swiss-made DTIs (except vertical Compac models).2. PLASTIC BEZEL!!! While this make bezel replacement a breeze, it also make the bezel a lot more prone to breakage. Also, the bezel comes off too easily. A blow from the air-gun @ 90PSI is enough to knock it right off the dial face.3. Solid stems. You won't be able to swivel the supplied stems to the angles that you want to use this DTI. Of course there are work-arounds but it would be nice if a swivel stem is supplied as standard.All in all, a very good DTI set at a good price (from Amazon - No tax to California). I've only had this for about 6 months with sporadic uses. Will update this later if something comes up. | 1positive
|
I ordered a 1/4in. sheet of Polycarbonate 12in. wide by 24in. long. Instead I received a sheet 1/4in. thick 11 3/4in. wide by 23 3/4in. long. What are we doing, measuring everthing by lumber dimensions now? | 0negative
|
I ordered these orings to repair my ford 6.9 diesel engine. I used them on the injector leak-off jackets to reseal them. They worked great and were a great deal. | 1positive
|
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
>:I assumed that the 3 items in the picture was what I was buying, not 1, what am gonna do with one? | 0negative
|
Really worked well, looks great! Play around with the food coloring to get that perfect flesh tone or really dead grey. You can also coat with blood made from Kayro, one drop of blue and about 12 drops of red. | 1positive
|
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
Not some sloppy fit, these screws are rough and tough and coarse threaded. Unless the price is abnormally cheap, as it was when I purchased them, I'm sure not many people are going to be reading this. But I will say I have successfully used some of these fasteners. They work as expected. | 1positive
|
I'm always running for o rings for something now I have a stock at home. | 1positive
|
I got this item to repair the many car coffee cups that I have that tend to dribble down my chin and onto my shirt and pants. The order did not work and I found the dimensions impossible to measure. | 0negative
|
It is very difficult to put the bits back into DW2513 case due to a design mistake, which is frustrating, and the chuck is loose and doesn't have a holder.The bits are otherwise okay and the case is Dewalt standard.This part is on clearance. Anything more than ten dollars would be too much. | 0negative
|
this product was as advertised; it was shipped promptly, well packaged and it performed as expected for its intended use | 1positive
|
Used to replace broken o-ring on a Remington 1100 12 gauge. Product fits perfectly and is of very high quality. At this price you basically have a lifetime supply! Highly recommend! | 1positive
|
This piece of tubing worked great for the project I built. The tubing arrived in great shape and is very straight. | 1positive
|
This seal works for early BMW oil filter stand O-Ring, not available from dealer. Or you end up buying new style housing which is a lot more. | 1positive
|
I was looking for rings to replace lost broken or old rings on my favorite coffee travel mugs. These rings did not work. | 0negative
|
Something I didn't see on the packaging that might be good to know,you have to cut the tip off of the attachment they give you. Otherwise nothing will come out. The sealer was really easy to use,didn't smell at all and seemed to work as far as I could tell. I did apply it after it rained over night,so make sure you wipe up as much water with a towel as possible. I went around my entire front windshield with this tube and still had a ton left over. However it did start to run down a tiny bit,but not enough to hit part of the glass that you can see from inside while driving. I will continue to update as time goes on!**Update!**After a few days I can easily say this was a success. It dried pretty quick (even in the rain) and is keeping water out. However it is very...shiney. It's super noticeable even if you're not looking directly at it,but it's doing its job,so I wouldn't call that a complaint. Highly recommended! | 1positive
|
THIS PRODUCT WAS EXACTLY AS I EXPECTED, I AM FAMILIAR WITH THESE ITEMS, I USE THEM IN SPECIAL APPLICATIONS IN MY HOBBIES | 1positive
|
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
These were the PERFECT match for the screws I needed for my old Atari Battlezone arcade machine handles. I don't know if anyone else on the plant will need to know that, but if so, get these! You will not find these in your local brick hardware store, trust me, I spent hours searching. | 1positive
|
Too lazy to go out to the store and find this item so I ordered it here. Came in one day. I love Amazon Prime.Oh and having the brush is nice for applying the glue. | 1positive
|
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
It tastes so good. I put it on my fries and it was great. I put it on my cat's food and now it has 18 half lives. | 1positive
|
What can I say? This box held shoes for two right feet.And the surface of the shoe is a soft brown -looks like a coating that will rub off on the soles of my feet. | 0negative
|
from one cyanoacrylate adhesive to the next all pretty much the same. The difference and reason this one rates so highly is the applicator. Nail polish like application dispenser doesn't clog. | 1positive
|
This item was stated as new. The case was broken. The items inside were ok, but this was NOT NEW. I called the company who sold them 3 times and got an answer machine all 3 times. My calls were never returned. I will NEVER BUY FROM THEM AGAIN and dont suggest others do either. Amazon was going to refund, but it was just for a broken case and I didnt want to bother. Just shows that the company selling is NOT a good company and should not be a representative of Amazon.com. | 0negative
|
I was looking for rings to replace lost broken or old rings on my favorite coffee travel mugs. These rings did not work. | 0negative
|
If i wanted Tesla's earthquake device i would have specifically ordered it. This wheel was to supposed to sharpen knifes, not bring my very sturdy work bench to life or loosen bolts on my grinder. I advise all potential buyers to purchase any product but this one. | 0negative
|
I was looking for rings to replace lost broken or old rings on my favorite coffee travel mugs. These rings did not work. | 0negative
|
I was quite surprised to find this on the Amazon website. And, the price was right and it was exactly the size I needed for my project, and came promptly. | 0negative
|
Shipped promptly and arrived well packaged. It's the grade of stainless steel I needed for a LOW PRICE. I'll order again! Thanks- | 1positive
|
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
This is a superior product for drilling mild steel and other uses.Have not tried on harder materials. As a retired IA Teacher, I've been through many 3/16" drill bits.I find them perfect for drilling pass through holes for sheet-rock type screws. | 1positive
|
Just standard O-rings. They work great for 5-gallon soda kegs used for home brewing. With the 100-pk, I won't have to buy more....ever. | 1positive
|
I had been going through o-rings on our tube filling machine like crazy. I had to replace it once a week or more often. I decided to order this 25 pack since it was so inexpensive. It's been a month and a half and I have not yet replaced the first one of these. They seem to be extremely durable so far. | 1positive
|
I'm always running for o rings for something now I have a stock at home. | 1positive
|
I was looking for rings to replace lost broken or old rings on my favorite coffee travel mugs. These rings did not work. | 0negative
|
If color is a factor when purchasing this item, know that it is black. This item worked perfectly to lower the turn signal lights on my 2009 harley sportster 883 iron. i used it in conjunction with a 1 in. long 5/16"-24 coupling nut. | 1positive
|
The screws are black (not silver as pictured). The heads are also wider than a normal screw. Otherwise no issues. | 1positive
|
Fits my Remington 1100 Shotgun perfect! Replaced my old hard worn out one. I dont think I will ever use all 50 of them, but maybe some friends will need some. | 1positive
|
works good but the on/off button does not function properly, when you shut if off it usually comes right back on. you have to lay it down and than shut it off! | 0negative
|
I got this item to repair the many car coffee cups that I have that tend to dribble down my chin and onto my shirt and pants. The order did not work and I found the dimensions impossible to measure. | 0negative
|
On my very first usage of this product I was just 5 minutes into clearing water from a concrete patio when the welds between the main squeegee and the stem collar failed. Upon close inspection the two pieces of metal are mated using just three tiny welded dots on each side of the main squeegee. It took very little effort for those welds to fail. Considering that this product is intended to rub roughly over patios many times, this is a major design flaw. The product says if you are not satisfied then you can return it for your money back- if you gave the receipt. I bought it during the dry season to be ready for the rainy season, so I don't have the receipt any more- too bad for me. At least this review may help save you your money. I recommend you do not buy it. If you decide to anyway, then I strongly recommend buying a hose clamp and putting that around the stem collar as close as you can to the squeegee as an extra support. | 0negative
|
The new safety feature that requires an upward push on the striking lever before pushing inward causes a significant usability problem, three or more attempts are required to get a flame. The old design worked fine for 15 years.Unhappy. | 0negative
|
The wide variety of ring sizes available allowed me to pick the precise ring for my unusual application. I used the o-rings to replace the drive belts on an old movie projector | 1positive
|
The specs as shown in the "Brass C260 Seamless Round Tubing" provided by "Small Parts" are inconsistent. For tubing, the "OD" should be equal to the "ID" plus twice the "Wall Thickness". 56 of the 123 entries for round brass tubing are incorrect. You may not get what you expect if you're counting on telescoping different tubing sizes. An example is: 'Brass C260 Seamless Round Tubing, 3/16" OD, 7/64" ID, 1/64" Wall'. One of these three numbers must be wrong. | 0negative
|
The idea that the average consumer is going to want ten of these is rather unlikely, I certainly don't and don't appreciate buying ten times more than I need just to get one of them. | 0negative
|
Not only was the final product terrible, but when I went to throw them away, one of the pointier ribs tore a hole through the bag, spilling tibulae and fibulae onto the sidewalk. This led to a very awkward conversation with my neighbor, and subsequently, the police. In short, I cannot recommend these bones, nor can I recommend Target store-brand trash bags (kitchen size). | 0negative
|
Highly recommended! I bought mine in a dark corner near the Walmart parking lot in Los Alamos and I'm really satisfied with the product. | 1positive
|
After reading all the other positive reviews, I was expecting good things from this product. Not miracles, but a good product capable of doing solid work.I first tried it on a delicate black scarf that I was going to throw away anyway as it had so much fuzz and lint. It worked pretty well on this product. It didn't make the scarf look new, but it did make it presentable. However, it also made plenty of holes in the scarf.I then tried it on a mock turtleneck that was starting to get pills. I hoped that being thicker, the mock T could withstand the shaver. However, the shaver started making holes in my shirt before I quit to salvage what I could of my mock T. Furthermore, it did not remove the pills very well.Maybe I am not using the product correctly. But then again, it does not come with specific instructions...For a better product that won't ruin your garments, try the SWEATER STONE which is a CONSUMER REPORTS 'Best Buy.' | 0negative
|
I simply misunderstood what this product meant by 0-ring. However even given this slight mistake along with a little lubricant this doubles as a great 0-ring stabilizer. | 0negative
|
I bought these based on the recommendation of a previous reviewer. The seal on my Nissan 14oz Leakproof Insulated Travel Mug broke when I was washing it, and without the seal, it wasn't leakproof. These work great. Thanks, previous reviewer! | 1positive
|
I normally do not write reviews for items, but, I was so dissatisfied with this product that I felt I should warn others of the quality. I purchased a package of 100 screws, and I am glad that I had plenty extra. I ended up throwing away 1 of every 4 screws. I discovered 2 problems with the screws. The first is that the threads are bad on some of the screws and would not thread into the #8/32 bolts I have. I know it was the screw because another brand I purchased (shorter length) always threaded with no problems. Also for a good screw in this batch they also threaded with no problems. The second problem is that the hex head is not a consistent size. some heads would not accept the hex key in them, being to small, others fit just fine.Good price, but consistent quality is definitely an issue. | 0negative
|
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
Great product to use as a wood filler. Dries rock hard.I was not impressed with the ability for the epoxy to take stain. | 0negative
|
The distributor for this product tried a bait and switch tactic. They advertised a "pack of 6" at 81% discount. I figured it was near the end of shelf life and purchased it anyway. They sent only one kit! When I complained, they only offered to accept a return. But I refused to spend more time on them. | 0negative
|
I have to agree with the other posters who found the quality lacking in this product. It does not seem to match the photo and does not even fit together. The holes for the little wire pegs that keep the two halves together are drilled too close together so that you cannot get both pegs in at the same time. Also, the mitral and tricuspid valves are not attached in any way and fall out when you open the heart. Very disappointed and will be returning. | 0negative
|
I simply misunderstood what this product meant by 0-ring. However even given this slight mistake along with a little lubricant this doubles as a great 0-ring stabilizer. | 0negative
|
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
I simply misunderstood what this product meant by 0-ring. However even given this slight mistake along with a little lubricant this doubles as a great 0-ring stabilizer. | 0negative
|
Fits my Remington 1100 Shotgun perfect! Replaced my old hard worn out one. I dont think I will ever use all 50 of them, but maybe some friends will need some. | 1positive
|
I tried this item on a queen size Tempur Pedic mattress and the mattress was to thick to get this product around it and carry it . It appears it may work well enough for thinner mattress. | 0negative
|
No idea if this product would have worked for my intended purpose or not. Amazon brilliantly packaged this very thin sheet of metal in nothing more than a cardboard sleeve, taped shut at the ends. It arrived bent and falling out of the end of the cardboard sleeve (you know, because a sharp piece of metal can slice through packing tape). | 0negative
|
I used this stuff to rub baseballs with, and boy did my pitching improve. I now rank right there with Stephen Strasburg. Highly recommended for pitchers who are past their sell-by date. | 1positive
|
Looking for a better and cheaper alternative than buying the $5 each Omni Heavy Duty whole house filter o-rings? This is it. The silicone is FDA approved and at $5 for 10 pieces! | 1positive
|
not very strong bit, the 1/4 inch has already become rusted but for boring not manageable but not the best bits especially that it has the Bosch name on it could do better | 0negative
|
The caliper claimed to have two batteries, but came with just one. I would like to receive the other battery. | 0negative
|
Yes, this is the one you've been hunting, and yes, my 91 geo 1.0 quit leaking from there. What to do with the extra nine? Well, I don't know either, but its hard to beat the price!!! | 1positive
|
I ordered these orings to repair my ford 6.9 diesel engine. I used them on the injector leak-off jackets to reseal them. They worked great and were a great deal. | 1positive
|
I'm always running for o rings for something now I have a stock at home. | 1positive
|
No idea if this product would have worked for my intended purpose or not. Amazon brilliantly packaged this very thin sheet of metal in nothing more than a cardboard sleeve, taped shut at the ends. It arrived bent and falling out of the end of the cardboard sleeve (you know, because a sharp piece of metal can slice through packing tape). | 0negative
|
I was looking for rings to replace lost broken or old rings on my favorite coffee travel mugs. These rings did not work. | 0negative
|
I am turning these into vent liners for my muzzleloader. With new vent liners running $2 to $3 a piece, it's a grat bargain to make my own with these screws. | 1positive
|
I had been going through o-rings on our tube filling machine like crazy. I had to replace it once a week or more often. I decided to order this 25 pack since it was so inexpensive. It's been a month and a half and I have not yet replaced the first one of these. They seem to be extremely durable so far. | 1positive
|
You'll have to finish this material extensively as it comes rough from casting.I would have expected a more finished material.I would not purchase it again. | 0negative
|
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
I simply misunderstood what this product meant by 0-ring. However even given this slight mistake along with a little lubricant this doubles as a great 0-ring stabilizer. | 0negative
|