text
stringlengths 70
7.86k
| label
class label 2
classes |
|---|---|
solar boiler parts
excellent price and good delivery. the item will be used to seal pyrex glass tubes used for a solar boiler to create steam. | 1positive
|
disappointing
Excellent delivery time from Amazon, but unfortunately the product was a disappointment. The mantles produce a low level yellowish light which would barely cast a shadow. Additionally, within a week they began to burn out. | 0negative
|
Love this style!
Great style, finish, and quality. Goes great with our Old World European house and furnishings. Love the quick refill feature...one end pivots upward to slide roll on/off. | 1positive
|
best vac for your garage
hung it in my garage and it worked very well to clean my car . now i do not half to get the vac out of the house, and the long hose works very well | 1positive
|
Good Product
This copper bar will be just what I need to fabricate a custom battery disconnect terminal to hide under the rear panel of my 928. | 1positive
|
Not what I was looking for.
I was looking for rings to replace lost broken or old rings on my favorite coffee travel mugs. These rings did not work. | 0negative
|
Good Product
This copper bar will be just what I need to fabricate a custom battery disconnect terminal to hide under the rear panel of my 928. | 1positive
|
Seller had poor attitude product OK
As picture with description was not correct I called seller and he said description correct but had no idea if picture was right or wrong. Picture showed tapered shank not straight. To me this seemed odd as seller sure had to be responsible for the picture in ad. Product was shipped promptly and was as described. | 0negative
|
cheap quality
within 2 months of wearing them, the glue that holds the leather top to the sandle wore down and it's not too late to exchange them....better off buying rainbows | 0negative
|
Good Wood
Well sanded good quality dowels. The price wqas right and it saved me a special trip into town to buy them from the home center. | 1positive
|
Not a good substitute for traditional thread locking.
Although this product is convienent to use, it doesn't do a very good job of filling the inner space. Our results were all over the place. Would not recommend this product but would advise others to use a traditional thread locker, if they really need something thread locked. | 0negative
|
Worked and saved
The product worked great and saved money compared buying from the dealer of the device it was used in.I expected only one and got a pack for less than two dollars. Since this is a replacable part I will be able to use the extras in the future. | 1positive
|
Works for Geo Metro Distributor Seal !!!
Yes, this is the one you've been hunting, and yes, my 91 geo 1.0 quit leaking from there. What to do with the extra nine? Well, I don't know either, but its hard to beat the price!!! | 1positive
|
Batteries Stink
We pulled it out of the box, foolowed the instruction to get it charging, waited 12 hours for it to charge, put it on the floor and watched it go. It ran for 5 seconds then stopped. We got a new battery...same thing. Basically dont buy it. Its a piece of junk. DONT BUY IT | 0negative
|
Not whats advertised
the finish has tooling scores all over and its 3/8th of an inch smaller and a 16th thinner than the 12x12x1/2 it lists itself to be, otherwise it was packaged rather well considering its just a slab of plastic | 0negative
|
Ant Farm With No Ants
Dear Uncle Milty:For Christmas...I ordered an ant farm sent to my great grandson, Danny, in San Francisco....However, we were disappointed to find that there were no ants included. There were instructions to send $3.00 mailing charges and the address to Uncle Milty's Ant Farm. We followed instructions and so far, there has been no delivery of ants. Just the other day, I asked Danny by email if the ants had arrived and (with his mother doing the typing) his answer was, "No. Maybe the ant guys came while we were asleep. I will go see....(pause)....Nope, they never came." He and I are both very disappointed....Thank you very much, Patricia Walters | 0negative
|
not what i expected
the was only one sock i expected two. even though it was rated 20 to 30 mg it was much thicker and ugly that any other compression stocking i have ever bought. | 0negative
|
It's round and rubbery
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
brass tubing
I was quite surprised to find this on the Amazon website. And, the price was right and it was exactly the size I needed for my project, and came promptly. | 0negative
|
Mislabeled
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
Been Lookin For These at A Good Price Finally Found Them
Fits my Remington 1100 Shotgun perfect! Replaced my old hard worn out one. I dont think I will ever use all 50 of them, but maybe some friends will need some. | 1positive
|
Great
Good product and free shipping. Used this for a place to put my welding ground clamp on my welding table. Not polished, so if you need bright shiny copper be prepared to spend some time polishing. | 1positive
|
Too many rings in a pack
The idea that the average consumer is going to want ten of these is rather unlikely, I certainly don't and don't appreciate buying ten times more than I need just to get one of them. | 0negative
|
Looks Like an O-RIng
The O-rings arrived on time and look good. Amazon has a great selection, far better than any store I could find in town. They are marked in fractional inches, but that size is only approximate. Look in the product description and it will tell you the exact size in thousandths of an inch. | 1positive
|
great product
This is awesome, it enables one person to carry a 4X8 sheet of drywall by themselves, and not hurt themselves. | 1positive
|
Quality O-ring
It is just what you would expect. Works fine, looks like good stuff. I go through a bunch of these on camp fuel stoves and bottles. Viton lasts much longer than NBR. | 1positive
|
Not whats advertised
the finish has tooling scores all over and its 3/8th of an inch smaller and a 16th thinner than the 12x12x1/2 it lists itself to be, otherwise it was packaged rather well considering its just a slab of plastic | 0negative
|
Too many headaches...
I purchased two of these vacuums about 4 months ago. One is still working fine, the other one had a switch go bad within 30 days - so I was able to return it to Amazon. I purchased the exact same one with the refund money thinking I must have just gotten a dud... now it has quit working all together, and we're outside the 30 days for Amazon. We have to take it to a local service center. For only being a little over 3 months old - it has not met my expectations. | 0negative
|
Dribble-proof a 750 ml Nalgene bottle
My favorite Nalgene 750ml bottle had turned into a "dribble" bottle. This ring is the correct size to fit over the neck and seal against the cap when the cap is screwed on. Not perfect - when you unscrew the cap, a little water that was sitting above the ring will drip. But I'm not getting dripped on when I drink. | 1positive
|
Too much charge for shipping and return
This one charge too much shipping fee and you have no option to choose cheaper shipping.When I got two sets for my bathroom and found they didn't fit my current valve system even it's exactly same model from Moen so I decided to return. However I was charge 20% restocking fee even I didn't touch anything inside the boxes and return the wholething with orignial packages. | 0negative
|
Stainless Steel (316) Bar 1/4 x 1 1/2 x 12 as advertised for $13.16
If you know what grade 316 stainless is and are familiar with its proffered and how to machine it,all I can say its they delivered what was promised without any problems: an unpolished rectangle/flat bar 1/4" thick, 1 1/2" wide, 12" long for a little over $13.00.For background stainless steel 316 is one of the most corrosion resistant of all the common "austenitic" (any grade of stainless in the 300 range) stainless steels. It is sometimes called marine grade stainless because it resists corrosion even in the presence of saltwater. It is often called A4 stainless on metric sized fasteners.If you plan on using this for a project requiring machining -- like drilling or milling -- keep a couple things in mind:1) Don't even think about trying to drill without coolant. If you value your drill bits life, use LOTS of it, literally keep flooding the area with coolant from start to stop. If you don't have any real coolant, try regular olive oil.2) You can drill this with high speed steel drill bits, but cobalt bits will last longer because this process generates heat that cobalt can deal with better than high speed steel. If possible use a drill with an angle around 135 and if you can use a shorter "screw machine" or "stub" length drill rather than the standard "jobber" length.3) Drill a with lot slower rpm than you are used to for regular steel or (especially aluminum) and keep the pressure on. If you need to disengage from the cut, pull it back completely out of the hole immediately -- never let the drill just stay rotating in the hole without a good bit of pressure applied. It is much easier to do this on a drill press or mill than with a hand held drill because you can maintain pressure without flexing the bit (which can cause it to snap) more easily on a press.4) Make sure your bits are SHARP. Don't even bother trying if your bit is the least bit dull or worn.5) You can do this even if you've never machined/drilled a significant hole in a real metal before -- I first learned about metal cutting using Titanium 6al4v, which is a lot like this material as far as drilling / milling strategy goes. I never understood why people said it was so difficult to machine until later when I worked on mild steel and aluminum -- if you're used to those metals or try to machine this like it is those metals, you will likely be quite frustrated.6) This product comes unfinished (scratchy). If you want it to look half decent, use a disc or belt sander, start at 80 grit and work your way up to 400 to 600. It should look pretty decent by then. If not, move on to buffing with buffing wheels and appropriate compounds.I hope this provides a decent review of my transaction, plus what this stuff is used for and what to do with it so people can decide whether its appropriate for whatever project they're working on. | 1positive
|
o rings
I'm always running for o rings for something now I have a stock at home. | 1positive
|
Terrible, terrible product.
I choose to rate this item as 1-star since it came at a much larger size than I wanted. I wanted a 2" ID instead I got a 3" ID which is a ridiculous size bigger, when I check my order it says that I did order the 3" which is completely wrong because I had my measurements all written down when I was ordering. I'd recommend never purchasing from this company since they will not give you the correct item. | 0negative
|
Transaction Satisfaction
Excellent transaction. Received timely and in advertised condition. I would do business with this seller again. | 1positive
|
All's right with the O-Rings
The o-rings are as described so what's not to like. The price is reasonable and they arrived within a week. I'll try this source again when looking for small parts. | 1positive
|
Installed Two & Both Failed Within 60-Days of Installation
Unacceptable!I installed the first rotator in October 2008. All was well until the first day the temperature was below freezing - the unit failed to rotate. When the temperature rose to above freezing the unit began rotating again. A second period of below freezing temperature - the unit failed to rotate. As before, when the temperature rose to above freezing the unit worked again, but then froze in position and failed to rotate even when temperatures reached 40+ F. This all occurred within 60-days.I had to melt the snow off the roof in order to remove the rotator in order to exchange it before the 90-day warranty expired. The second rotator has been in place for just seven days and tonight has failed - temperature is 22 F tonight. I expect that due to the weather I will not be able to get onto the roof to remove this second rotator so the warranty will expire and I will be out the full cost of the rotator.I strongly urge you to buy another rotator - this model is completely unreliable. | 0negative
|
brass tubing
it was just as described. It arrived on schedule and I was able to start my project right away. I am very happy with this transaction. | 1positive
|
poor design
i found this thing difficult to use. the tray is too wide for 1 sheet & slips, maybe designed to carry 2? you still have to bend over to slide it under. anyway save your back get the gorilla gripper. it lifts from the top & you can swing the sheet around w/o slip & slide. i used this to carry plywood to the roof. i threw it aside after a couple attempts. used straps instead. | 0negative
|
Too Hard to Measure
I got this item to repair the many car coffee cups that I have that tend to dribble down my chin and onto my shirt and pants. The order did not work and I found the dimensions impossible to measure. | 0negative
|
It's round and rubbery
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
Mickey Mouse Garbage
At best, this is good as a child's toy. Even when the rubber was moistened to increase the suction, it did not adhere to a smooth surface long enough to accomplish any chore. The plastic is not of a durable type, and the metal parts, especially the clamping part is very cheap. All in all, even at $9.99, I would say to save your money. | 0negative
|
Extruded, not cast, bad shipping and more!
I bought this for optics related work. First off, the rod was not packaged in a bag or anything, it was shipped bare inside a cardboard tube and had scratches, also, it had a label applied directly on the rod, super sticky and removing it with anything that would dissolve the glue would also stain the acrylic. Shining a light or laser through the rod, you can see the "bumps" of it being an extruded product, not cast. So this is completely useless for anything optics related... it may make for an expensive and cheesy towel rod! | 0negative
|
Not good.
So I bought this vinyl tape thinking it would stick to vinyl siding. Well, it didn't. Not even a little bit. This tape practically ran away screaming from the vinyl I tried to stick it to. You might need some of this tape on a tropical island to bandage a broken leg. As long as your leg isn't made out of vinyl. | 0negative
|
Not what I was looking for.
I was looking for rings to replace lost broken or old rings on my favorite coffee travel mugs. These rings did not work. | 0negative
|
shark steamer review
I purchased a SC505 portable steamer for christmas 12/22 and was tested in the kitchen on 12/26 *My wife done the floor with the floor attachment and worked (Great).The problem was with the attachment called,(hose concentrator nozzle)item # 11.We put it on to clean oven and cooktop, the steam came out the tip, and also sprayed out about 2 inches up in the handle where the seam opened up (flaw in the design mold) so because of the cheap attachment (design)to rate this product would be, it needs (improvments) or better attachments. *signed very angry* | 0negative
|
Mislabeled
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
Mislabeled
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
021 Viton O-Ring
I was having blow back issues with my 12gauge, and all the suggestions pointed to my gas ports, and the O ring. Now that I have replaced it, I need to get out and shoot again. Hopefully this was the fix. The only draw back with this product, is that you receive a "Costco" supply; more than enough for a lifetime. | 1positive
|
It's round and rubbery
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
Not worth the MONEY!
I am a IRON WORKER, and need the best hand protection money can buy. I tried the Ironclad Heavy Utility gloves in hopes that they would prove to be lighter yet offer good protection against cuts. After only 2 days of use "packing rebar" the threads wore through allowing the "DuraClad" patches to come loose and also one of my fingers kept comming out due to the seam splitting! This is not worth $30.00+ Dollars to me! Stick with the $2.00 double leather gloves we are all so familiar with, they last so much longer. | 0negative
|
Great product, poor price.
Buy this and many other sizes somewhere else for a better price. High shear strength lags with corrosion resistant coating requires no pre-drilling. | 0negative
|
Some one is reading these reviews.
I am displease the Amazons customer service. all I'm asking is that someone help me with the matter.678 983 5360 or ericlandress@gmail.com | 0negative
|
Terrible, terrible product.
I choose to rate this item as 1-star since it came at a much larger size than I wanted. I wanted a 2" ID instead I got a 3" ID which is a ridiculous size bigger, when I check my order it says that I did order the 3" which is completely wrong because I had my measurements all written down when I was ordering. I'd recommend never purchasing from this company since they will not give you the correct item. | 0negative
|
GREAT PRODUCT FOR A GREAT PRICE
WOW, researched "O" Rings off & online for awhile, almost bought one at another store online, but it was 5 times the price, I thought of amazon and I probably could have done even better, but I am pleased with these.Thank you again, Amazon has not let me down yet!! NO LEAKS!Tim | 1positive
|
Mislabeled
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
Massive wall damage
Our house was built in the 1950's. I used three hooks, and though two came off cleanly, one did not. While slowly pulling down the adhesive snapped off. I had to pry it off and with it came a giant chunk of wall. For older houses be very careful using these. I'll never use these again, too risky. | 0negative
|
Need at Remington 1100 gas seal?
This is what you want. Economical and high quality. Works perfectly. Great alternative to the factory or firearms products. 100 rounds test proved perfect performance. | 1positive
|
Good product, but takes practice
I saw the Gorilla Gripper on TV and decided right then that I needed to have it. I waited a while hoping to find it in the stores, but never did. I finally bought it on Amazon and was so happy when it came in. I tried it out, ouch! I was sure glad I had my steel-toed shoes on. I droped the first sheet of drywall twice while carrying from the garage to the basement. I went back up to the garage to get the second sheet but this time played with the positioning, practiced lifting it smoothly, got comfortable with the new walking style, and I was good to go. I now carry plywood, tile backer board, and drywall from the utility trailer, into the garage, into the house, and into the basement all without ever having a problem. This tool is very useful and I love it! | 1positive
|
Fits perfectly
I lost the original ring to my Nissan Stainless coffee cup, and was looking for a new one on Amazon, when Amazon suggested this o-ring to me. What a good suggestion! Now my old cup has a new lease on life and I can lose the ring like 9 more times before I have to buy a whole new one :) | 1positive
|
It's round and rubbery
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
Poor quality. Dissappointing
I have owned Reef flip flops for 8+ years. I was due for a new pair and naturally wanted to replace them with the same sandal. I ordered 1 pair. They were poorly constructed. The leather sole was not glued down and kept bubbling up in different locations. I ended up ordering a replacement. They arrrived and were even worse. Replaced with 2 extra pair...all with the same issue. Really dissappointed with the quality of their product. I kept one pair b/c the were inexpensive and I was in a pinch (ended up having to crazy glue the leather down to temporarily fix), but will be looking to a different brand moving forward! | 0negative
|
brass tubing
I was quite surprised to find this on the Amazon website. And, the price was right and it was exactly the size I needed for my project, and came promptly. | 0negative
|
Not on time
I did not get a delivery notification and the package was delivered one week after scheduled. | 0negative
|
It's round and rubbery
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
It's round and rubbery
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
terrible product
At first this seemed great... Got the jig in place, attached the 2 1/8" hole saw and went to town. Sure some of the plastic jig got chewed off but whatever I expected that.. It want much... Getting the mandrel off was a herculian effort but I got it off finally... Went to attach the 1" hole saw to mandrel and found it doesn't fit... Not even close. The threads for it are substantially smaller so it is essentially useless to me. there is no way to get it in the supplied mandrel. None... Now I have to go to the hardware store and get the right tools when I thought thats what I spent $20 on in thr first place. This product is junk. If all u need is to use the 2 1/8" hole saw this is the overpriced tool for you... If you'd like your door to have the hole for the deadbolt stay far away from this item. Seriously.. I just bought this yesterday and my next order of business is hate mail to Irwin and asking for a full refund. | 0negative
|
Tough by whose standards?
I work with my hands and require TOUGH gloves.These don't make the grade.These are way overpriced for how long they last.I believed the hype of the item description and bought multiple pairs,thinking they would last me a long time.Kevlar stitching! Triple padded palm! Yadda,yadda,yadda.They lasted three days before the threads began to slowly wear away.THREE days!They were completely gone on several fingers,especially the thumbs within two weeks.Without the stitches,the gloves slowly start to come apart,finger by finger.There is not enough stitching in other areas,also.The velcro strap at the wrist was nearly off on the left glove within the first week.They also make your hands stink!There is almost no ventilation in these gloves and your hands get hot and sweaty!If I throw them in a washer on top of the normal wear,they will disintegrate that much faster.I used them for 4 weeks and by that time there are loose flaps of material on nearly every finger,and the first hole had appeared.A crappy pair of ordinary leather work gloves will last nearly as long,and they are much cheaper.For 4 times that price of a cheap pair of gloves,I expect 4 times the durability.Does no one make a TRULY long lasting glove any more? | 0negative
|
im not completely satisfied, honestly i wasted the money.
it does the job, but it doesnt do the job well. its not a sharp reflection, i figured that it would be a strong refelction, the adhesive side has more reflection then the plastic side. | 0negative
|
magic my ars.
C R A P. Doesn't stick, peel off adhesive doesn't peel off. Just a really bad product. Duct tape would do the job better. | 0negative
|
Good Price / Quality seems fine
Needed a number of these and did not like the small packages and high prices at the home center stores. Save some money buying online and quality seems fine. | 1positive
|
Looks Like an O-RIng
The O-rings arrived on time and look good. Amazon has a great selection, far better than any store I could find in town. They are marked in fractional inches, but that size is only approximate. Look in the product description and it will tell you the exact size in thousandths of an inch. | 1positive
|
Exactly as stated, 4th quality
Delivery took longer than expected. The quality of the product is exactly as stated, 4th quality. There were a lot of pieces that were were not cut of extra plastic and a few screws missing that I needed to replace. | 1positive
|
self made meat hooks for smoker
just right for my need-made cooker hooks out of it, just cut into pieces, bend and sharpen then hang in smoker. much cheaper than buying hooks premade. | 1positive
|
Works better than the original!
I purchased these O-rings for replacing the drive belts for a rod dryer (fishing rods). They're stronger than the originals! | 1positive
|
Didn't work at all
I'm tiling my bathroom and thought this would be helpful. The drill bit is very cheap metal wouldn't make the least dent in the tile I was using. In fact, I flattened the end of the drill bit trying. And the saw blade wouldn't cut the tile either. Maybe it needs ...what ...softer tile? Good grief - this is just junk. | 0negative
|
Dribble-proof a 750 ml Nalgene bottle
My favorite Nalgene 750ml bottle had turned into a "dribble" bottle. This ring is the correct size to fit over the neck and seal against the cap when the cap is screwed on. Not perfect - when you unscrew the cap, a little water that was sitting above the ring will drip. But I'm not getting dripped on when I drink. | 1positive
|
Mislabeled
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
Item is rough from casting
You'll have to finish this material extensively as it comes rough from casting.I would have expected a more finished material.I would not purchase it again. | 0negative
|
Does not stick well
Does not work for small pieces - like crystal glasses, or figurines. It just doesn't stick. It does work for larger objects - my Royal Albert teapot, but I had to use a large amount of it and even then, I'm not sure that it will just dehydrate and give way in the future. | 0negative
|
Mislabeled
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
not the right fit
This belt was not the right fit, we used the letters and numbers off the belt to place the order.... but still would not fit it was too big. | 0negative
|
Mislabeled
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
Silicone is nice over rubber
I really like these instead of the rubber ones I replaced them for. I would do this again since silicone is forever | 1positive
|
Received wrong product
Ordered this item, but received 6pc Diamond Hole Saw Set instead. They are tiny hole saws. Not sure why someone would want a hole saw that small when they could just drill a hole, but whatevs. Probably not worth trying to return given the price.I still want a wheel set though... | 0negative
|
Not at all as pictured.
I ordered the brown color expecting a light brown leather sandal. I received a mud brown, almost maroon swede sandal that looked awful. The tag matched the style and color here, so I am not sure what the deal is. | 0negative
|
Precise hex socket makes for a tight fit
Not some sloppy fit, these screws are rough and tough and coarse threaded. Unless the price is abnormally cheap, as it was when I purchased them, I'm sure not many people are going to be reading this. But I will say I have successfully used some of these fasteners. They work as expected. | 1positive
|
No return
I though I was purchasing 6061 Aluminum tubing with a finish for a bimini top. This tubing has no finish, and was not eligable for return. I would not recommend purchasing any products from this Seller. | 0negative
|
Great deal
Best price I have found and the screws did the job! they seem hi quality metal and more than good enough for my needs. | 1positive
|
Mislabeled
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
Dribble-proof a 750 ml Nalgene bottle
My favorite Nalgene 750ml bottle had turned into a "dribble" bottle. This ring is the correct size to fit over the neck and seal against the cap when the cap is screwed on. Not perfect - when you unscrew the cap, a little water that was sitting above the ring will drip. But I'm not getting dripped on when I drink. | 1positive
|
It's round and rubbery
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
Not what I was looking for.
I was looking for rings to replace lost broken or old rings on my favorite coffee travel mugs. These rings did not work. | 0negative
|
Kinda slow to ship (weather ?) but had what I needed.
Thanks for stocking these O-rings ; I could not find them locally. Just what I needed. Still arrived ahead of a few other items I ordered at the same time from other venders here on Amazon so I changed my review to five stars. | 1positive
|
Too many rings in a pack
The idea that the average consumer is going to want ten of these is rather unlikely, I certainly don't and don't appreciate buying ten times more than I need just to get one of them. | 0negative
|
Mislabeled
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
You get what you pay for
Digital readout doesn't work, very unreliable readout. Changes measurements just by shaking your wrist. Flimsy construction, guess I'll be spending more for a better and more reliable one.......stay away from this one!! | 0negative
|
Quality...
There's not much to say about o rings, unless they don't work. However, these are just fine. They appear to be well made and true to size. If you need them, buy them without worry. | 1positive
|
Fits Omni Heavy Duty Whole House filters
Looking for a better and cheaper alternative than buying the $5 each Omni Heavy Duty whole house filter o-rings? This is it. The silicone is FDA approved and at $5 for 10 pieces! | 1positive
|
106 Buna O-Ring, 70A Durometer, Black, 3/16" ID, 3/8" OD, 3/32" Width (Pack of 100)
Fast shipping, was a great price but they have increased in price over 100%. Good quality in these "O" rings though the bags are always short by 1-3 rings making it a question of why at this price. I got these for a specific purpose and they have gained some popularity for the specialized application I offer. Have bought 6 reorders at this point. | 1positive
|
Too Hard to Measure
I got this item to repair the many car coffee cups that I have that tend to dribble down my chin and onto my shirt and pants. The order did not work and I found the dimensions impossible to measure. | 0negative
|