text
stringlengths 70
7.86k
| label
class label 2
classes |
|---|---|
Worked Great!
I used this and it worked for my application very good quality and good pricing and also packaging. It's made well. | 1positive
|
Replaced Potassium Hydroxide in my hydrogen generator with this product...
I had been experimenting with running my Honda on Hydrogen but was having problems generating enough hydrogen to keep the engine running longer than a couple of minutes. I had been mixing Potassium Hydroxide with the water to increase the PH so it would conduct the current from the pulse width modulator more efficiently and reduce the heat build up. While researching on ways to improve the efficiency I came across this product and decided on a whim to give it a try. I took a teaspoon of the Uranium Ore, heated it and mixed it with a liter of water and poured it into the generator. That was a little over a year and a half ago and the car is still running. I mean, literally, it won't shut off. I have logged over 62,000 miles on that liter of water and am only able to stop the car by shoving it into neutral and applying the brakes. It just sits in my driveway in neutral making a strange humming sound until I'm ready to go. There is, however, possibly some associated health risks since all my hair and teeth have fallen out since I started and there are some strange looking sores developing all over my body. On the positive side, I am enjoying the glow that my body is emitting and the fact that I no longer need a flashlight to walk around in the dark. I'm sure its not related but I saw a squirrel in my yard last week that was actually larger than the Honda. I have been thinking about adding more Uranium but apparently with the half-life rating, its going to be several centuries before the current liter is depleted or the car stops running. In light of the increased gas prices, and the fact I no longer need gasoline, I have given this product a 5 star rating. (Unfortunately I am now being sued by the state tax department for failure to pay road use taxes since I have not bought any gasoline but continue to use the highways and the asphalt melts as car passes over it. Read the other views and I think you'll find this product is for you... | 1positive
|
Doesn't work on all tile surfaces
I'm sure these work great on flat tiles, but my shower tiles have a bit of an uneven surface to them and the sticky tape doesn't stick to them. I really wish they worked as this would have been a perfect, no-rust option to the typical hanging baskets that go over the shower head, but invariably rust or just end up getting nasty. | 0negative
|
Not what I was looking for.
I was looking for rings to replace lost broken or old rings on my favorite coffee travel mugs. These rings did not work. | 0negative
|
Wind No More!
My Bocce Ball club has 225 active menmbers, each with a name tag. These safety hooks are just right and wind is now a non problem. Good product at the right price. | 1positive
|
Dreadful!
Dreadful, dreadful, dreadful! I bought these because I was led to believe they were the 'Gold Standard' in flip-flops. The sole started to come away from the uppers within four wearings on the shoe. Buy some other make and forget the hype about this piece of 'shoe'! | 0negative
|
Remington 1100
Used to replace broken o-ring on a Remington 1100 12 gauge. Product fits perfectly and is of very high quality. At this price you basically have a lifetime supply! Highly recommend! | 1positive
|
brass tubing
I was quite surprised to find this on the Amazon website. And, the price was right and it was exactly the size I needed for my project, and came promptly. | 0negative
|
It's round and rubbery
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
Not very durable
The palm is padded, but the trims which are not padded get ripped very easily. Better to take craftman's mechanic gloves and cut the tips off. However, for seven dollars I bought a few, but expecting to last not very long.Overall, these are not very durable but for the cheap price, they still make a good addition as work gloves. | 0negative
|
Stickiness Never Dried Up
Applied to floor and stickiness never dried up on this basement kit. The summer environment in CA is supposedly perfect and this should not have been the issue. Tried to return to Amazon but given an environmental warning that this item is not returnable. Seeking for full refund !! | 0negative
|
No Problems
The material was as described and was delivered on schedule. The packaging was less than adequate since the bar broke through one end cap of the shipping tube. Otherwise it would be five stars. | 1positive
|
Not what I was looking for.
I was looking for rings to replace lost broken or old rings on my favorite coffee travel mugs. These rings did not work. | 0negative
|
Quality O-ring
It is just what you would expect. Works fine, looks like good stuff. I go through a bunch of these on camp fuel stoves and bottles. Viton lasts much longer than NBR. | 1positive
|
A must have for horse owners!
The maker of this product missed the boat when they didn't include how handy it could be for people with horses who use rubber stall mats! Our horses always to manage to get their 4'x6'x1" rubber mats out of place. Those 100 pound mats are big, heavy and extrememly difficult to move around, even with 2 people. With this tool, just about anybody can move the mats all by themselves. I ordered 2 more so I could keep 2 in the barn and 1 in the garage. | 1positive
|
Great replacement for Nissan spill proof travel mug
I bought these o-rings as a replacement on my Nissan spill proof travel mug. I use this mug all the time. It will keep a cup of freshly made tea or coffee hot for 3-4 hours if left closed, or at the right drinking temperature for a full hour. I tried to find a replacement for the o-ring at the Nissan website but could not. These o-rings are an excellent replacement. The mug closes water tight and works like new. Highly recommended for this application. | 1positive
|
brass tubing
I was quite surprised to find this on the Amazon website. And, the price was right and it was exactly the size I needed for my project, and came promptly. | 0negative
|
Coned by Deception
Take a look at the photo. See any orange dots around the top of the black base like the cheaper offers? Didn't think so. The cone you see is NOT what you get, but has hollow (not solid) lugs on the base bottom - a cheap cone by all means. Shipping too expensive to return. Delivered 10+ days late. Pathetic! | 0negative
|
not that good
runny and does not stick to any type of wire I tried it on even though I followed directoins. Stick with colored tape. | 0negative
|
No issue here
Just standard O-rings. They work great for 5-gallon soda kegs used for home brewing. With the 100-pk, I won't have to buy more....ever. | 1positive
|
Been Lookin For These at A Good Price Finally Found Them
Fits my Remington 1100 Shotgun perfect! Replaced my old hard worn out one. I dont think I will ever use all 50 of them, but maybe some friends will need some. | 1positive
|
A must have if your going to reload
I used it to check my rounds. It's just one of those tools you cant do with out. the case it came with fit nice to protect it. I will tell my buddies about the great deals | 1positive
|
Not the products fault
I simply misunderstood what this product meant by 0-ring. However even given this slight mistake along with a little lubricant this doubles as a great 0-ring stabilizer. | 0negative
|
Not the products fault
I simply misunderstood what this product meant by 0-ring. However even given this slight mistake along with a little lubricant this doubles as a great 0-ring stabilizer. | 0negative
|
ID was not same as advertised
The od and wall thickness were correct but the ID was much larger than advertised. It will cost just as much to send the item back so it is not worth the effort to ship it. | 0negative
|
3 pc. Countersink Set
The drill bits are to long if installing screws less than 1" unless you don't mind a hole on the other side of your work. It would be of benefit if the manufacture provided different length drill bits in the kit. | 0negative
|
Not For Outdoor Use
I bought this hoist from Grizzly and initially it worked great. This hoist was mounted under a carport outdoors. After a couple of weeks without using it, I went to do a job where the hoist would be useful. I went to hit the down button and I got no response. I checked all the wiring and deduced it was the motor. I took the motor apart and found that moisture had got into the motor housing and seized the motor core. I was able to free it and re-greased all of the gears and sealed the seems. Put it all back together and the motor worked great again. This time I covered the motor with a protective housing and two weeks later it was froze again. I called Grizzly and they basically told me they would fix it but it probably would keep happening again and they had no specifications on humidity or moisture tolerances.I would not recommend this product if you live in Florida or any other humid region. | 0negative
|
Not Tough Mudder approved
These gloves might be fine for some things, but I did not find them water proof and they filled with water and got heavy and soggy. Once wet, if removed, they were impossible to get on again. Too thick for what I wanted. | 0negative
|
Works as described!
Works great.One tip I would give is that since the bottom wheel would touch the wall, you can make a little 3" by 4" think block (from plexiglass, wood, anything) and attach it to the bottom wall where the bottom wheel would rest.Viola, instant protection from scruff marks from the bottom wheel. | 1positive
|
Looks Like an O-RIng
The O-rings arrived on time and look good. Amazon has a great selection, far better than any store I could find in town. They are marked in fractional inches, but that size is only approximate. Look in the product description and it will tell you the exact size in thousandths of an inch. | 1positive
|
PEOPLE SAY
People SAY THAT SKIL tools are fairly good products, and I would agree to that except, when it comes to their sanders that use the loop and hook (Velcro) backing. Now I don't know if all sanders of this type possess the same problem but,,, they cannot make the sandpaper backing last long enough to get the mileage out of the sandpaper. And if you look at the price of this sanding material...it's not cheap, in fact it's downright expensive......So go figure sp-ending 30-50 bucks on paper to last you on a project. . .get the picture.?? | 0negative
|
The hardware store said I couldn't buy these
Just what I needed to fix my pool fill valve. 25 is a lot but now I'm covered. | 1positive
|
Arrived broken
Didn't want to rate it 1 star! Company did nothing but try to put the blame on delivery service, however the product was broken. | 0negative
|
great gloves, bad insulation
i work in a freezer in a local grocery store(huge walk in and even the display type). after about only 3 minutes working on the displays, its as if i was just wearing the normal atlas fit ones as the insulation seems to be made for temperatures of 40 degrees and above. if you want a slightly insulated light duty work glove, this is for you. if you work in below freezing weather, look elsewhere. | 0negative
|
poor composite
I bought these gloves because the one i had from the states were well build, but the ones i bought were poorly designed. the palms rubbed off and fell apart with the first use. poor material. | 0negative
|
It's round and rubbery
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
Never felt so good to grease up some smooth surfaces.
Yea my laptop cooled down at least 5-10degrees C after applying a new coat. It really didn't have anything to do with AS5, but rather with the fact that some chinese worker decided to glob on a huge amount of grease on it during assembly. It's good for marketing because then the chips burn out faster.I'd give 5 stars if they would've just sent me like a crackball size amount instead of a whole eighth, as if I would need that much thermal grease in my lifetime. Like I said before, it's just good marketing. I only used like 0.1g, which is like a dabsworth. A 0.1g dab will take you really far out, man.I only give 1 out of 5 because I didn't even use 1/5th of 1/5th of 3.5g of robot smegma. | 0negative
|
The hardware store said I couldn't buy these
Just what I needed to fix my pool fill valve. 25 is a lot but now I'm covered. | 1positive
|
Reseal oil filter stand O-Ring
This seal works for early BMW oil filter stand O-Ring, not available from dealer. Or you end up buying new style housing which is a lot more. | 1positive
|
Stained my feet
Bought these for my honeymoon. They are comfortable and fit fine....however my feet are now black after wearing them wet. I'm assuming this will not continue after a few uses. I'm just hoping they didn't use any toxic chemicals in production... | 0negative
|
Not the products fault
I simply misunderstood what this product meant by 0-ring. However even given this slight mistake along with a little lubricant this doubles as a great 0-ring stabilizer. | 0negative
|
Beware of the Specs
The specs as shown in the "Brass C260 Seamless Round Tubing" provided by "Small Parts" are inconsistent. For tubing, the "OD" should be equal to the "ID" plus twice the "Wall Thickness". 56 of the 123 entries for round brass tubing are incorrect. You may not get what you expect if you're counting on telescoping different tubing sizes. An example is: 'Brass C260 Seamless Round Tubing, 3/16" OD, 7/64" ID, 1/64" Wall'. One of these three numbers must be wrong. | 0negative
|
Great for airsoft GBB fill valves!
I got these on a suggestion on an airsoft repair forum. They fit snugly into the fill valves, providing a better outer seal than most factory standard o-rings, and at a far better price than the exact same product when sold somewhere like Evike. The one problem I had was that my bag had 88 in it instead of 100. I'm not actually upset, since the price difference between it and other similar products still made this worth it, but a little more accuracy in the numbers would be appreciated.Pros -Great PriceFits snugly in placePlenty for more replacements lateCons -Didn't actually receive 100 | 1positive
|
Much-needed replacement!
My husband takes a Thermos travel mug of coffee with him every workday, and the o-ring was very stained. I also figured that eventually it would relax and no longer provide a tight, leakproof fit. I thought finding a replacement would be impossible, but, when it looks impossible . . . try Amazon! Found these, which are the exact size as the original. We're set for a long time, now! | 1positive
|
Prefect for the job
I received my order in a timely time and in prefect condition, in spite of its 8-foot lengths. The 6061-T6 aluminum angles were very stiff; much more so than the 6063, thus giving me the stiffening that I was looking for on my project. If you need something better than what's at your local home improvement store then I'd recommend this product. | 1positive
|
Wrong size
Regarding 1 of Nylon 6/6 Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100). I ordered 4 packages of them. Unfortunately, all of them were .033" thick, not 1mm. .033" is .84mm. If thickness matters(*wink*), which in my case it did, double check your received product.-Very inconvenienced | 0negative
|
No return
I though I was purchasing 6061 Aluminum tubing with a finish for a bimini top. This tubing has no finish, and was not eligable for return. I would not recommend purchasing any products from this Seller. | 0negative
|
Freud 4057L
This is an excellent 40 mm bit for the larger cabinet or European hinges. It hasexcellent cutting and true square bottom to the hole. It does have several cautions.The first is that it is a "left hand" bit which means it rotates counterclockwise.If you don't have a reversing switch on your drill press this bit will not work.Next the bit is a little over 3/8 inch diameter. If you can handle these limitationsit will work great. Being carbide it really cuts. | 1positive
|
Looks Like an O-RIng
The O-rings arrived on time and look good. Amazon has a great selection, far better than any store I could find in town. They are marked in fractional inches, but that size is only approximate. Look in the product description and it will tell you the exact size in thousandths of an inch. | 1positive
|
A poor value
Don't buy this product. The hooks will break over time and you'll have a useless wall hanging. Maybe it's a cold climate issue- not sure- MICHIGAN | 0negative
|
The hardware store said I couldn't buy these
Just what I needed to fix my pool fill valve. 25 is a lot but now I'm covered. | 1positive
|
It's round and rubbery
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
Size UP
Like the sandals, but unless you like them short and narrow SIZE UP! I typically wear a 10.5 in most shoes. I sized up to an 11 and they were too small. Returned them and ordered a 12. | 1positive
|
Not a good product
I bought one of these and it operated for all of two weeks and then quit. I also bought one of Bionaire's tower units and it quit working in less than a day. Junk! | 0negative
|
Mislabeled
Inside Diameter was supposed to be 1-7/8". First O Ring was labelled as what I ordered, but but too small with Outside Diameter of 1-7/8". Amazon promptly sent a replacement, but of the exact wrong part. I gave up and bought one locally for 1/3 the price. | 0negative
|
No issue here
Just standard O-rings. They work great for 5-gallon soda kegs used for home brewing. With the 100-pk, I won't have to buy more....ever. | 1positive
|
Item is rough from casting
You'll have to finish this material extensively as it comes rough from casting.I would have expected a more finished material.I would not purchase it again. | 0negative
|
All's right with the O-Rings
The o-rings are as described so what's not to like. The price is reasonable and they arrived within a week. I'll try this source again when looking for small parts. | 1positive
|
Price Change?
The item is just as described. It's made by Stock Gear Inc. and resold by Small Parts Inc. The face width is 3/8 inch. The gear I.D. is 5/16 inch. The hub diameter is about 11/16 inch and the hub projects about 3/8 inch beyond the gear on one side only. The hub is plain and must be drilled for a pin or set screw or else press fit to a shaft.I bought 5 of them at 20 cents each. Three days later, they are $3.52 each! Same with many other gears I bought. What's up with that? | 1positive
|
Too Hard to Measure
I got this item to repair the many car coffee cups that I have that tend to dribble down my chin and onto my shirt and pants. The order did not work and I found the dimensions impossible to measure. | 0negative
|
Did not work as I expect!
I buy for project, we make great reactor! Suddenly reactor turns too hot, big explosion! Now city is destroyed and horror movie is made about place... Worst of all we make Sweden angry! They say we give them radioactive animals! Is lie, we only contaminate little bit of Russia! I put picture of result in customer images. Not happy with this. | 0negative
|
Item is rough from casting
You'll have to finish this material extensively as it comes rough from casting.I would have expected a more finished material.I would not purchase it again. | 0negative
|
It's round and rubbery
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
THE RESULTS OF THIS PRODUCT ARE ABSOLUTELY PATHETIC
I bought this product and attempted to clean my shower, it did nothing but waste my time. It took at least 20 minutes for the water to heat up and turn into steam. It is a total waste of money. Also, just to carry this cleaner around from room to room was a burden on my arms. I think this product is a disgrace to technologists at Europro who are supposed to make prodcts that work properly. Not these type of "less than mediocre" products. I'm disgusted! | 0negative
|
Perfect for enhancing my 3 wolf t-shirt
I recently purchased a 3-wolf moon tshirt from Amazon, and my expectations were exceeded. All the things other reviewers said were true - it's a truly mystical shirt. However, despite all the wonderful things that were happening in my life because of wearing the shirt, I couldn't stop thinking about how much better it would be if the wolves glowed in the dark. This thought haunted me for weeks - I missed work, I lost sleep, and when I did sleep I only had nightmares about the non-glowing wolves I had been donning for so long. I had tried before to add my own glow - I bought glow in the dark glue and applied it, but it came off in the wash. I carefully pinned glowsticks around the perimeters of the wolves, but they stopped glowing after only one day! I even tried buying those glow in the dark stars for your ceiling and extracting the glow, but it turns out you can't do that. Then I stumbled upon the perfect solution - uranium ore! I simply rubbed some on each wolf, and they haven't stopped glowing for three weeks. Another plus of this particular method of making the wolves glow is that the skin under the wolves always feels nice and warm - I don't even need a coat in the winter. Uranium ore is great for this purpose, or for anything else you need to make glow, including children and pets (they're so easy to find now!). I highly recommend this product. | 1positive
|
Reseal oil filter stand O-Ring
This seal works for early BMW oil filter stand O-Ring, not available from dealer. Or you end up buying new style housing which is a lot more. | 1positive
|
Low Glow
I wanted this tape to use for nighttime security purposes: I put 3-4" strips on light switch plates and just above door handles to theoretically help us see critical spots during a potential emergency in a power outage. Most don't seem to glow at all, and those that do are so faint they would not be helpful much at all in a true emergency. Guess I'll have to try something else! | 0negative
|
Excellent Value
After purchasing a lower quality product from the local hardware store for about twice the price, I was happy to see Amazon carrying the silicon type of this O-Ring and for a lower price. They are quality products for a great price. | 1positive
|
These gloves aren't for real working people.
I bought these gloves and they had holes in them in a three days. The stitching came out. They're crap. $25 for what? If you actually work for a living just get a pair of regular leather work gloves. These might be fine for weekend warriors but I'm a landscaper and these gloves just don't cut it. Honestly, don't waste your money. | 0negative
|
It's great, I use it as a bracelet-wristband!
GREAT PRODUCT, HIGHLY RECOMMEND IT!, GREAT GREAT GREAT THING YEAH! GREAT THING YEAY!GREAT PRODUCT, HIGHLY RECOMMEND IT!, GREAT GREAT GREAT THING YEAH! GREAT THING YEAY! | 1positive
|
It's round and rubbery
Dunno what to say about an o-ring, but they appear to be well-made, come nicely packaged, etc. | 1positive
|
"fits like a glove"
The Ansell Hyflex gloves work great. A retired surgeon introduced these to me a few years ago and I wear them a lot in the shop. The biggest advantage is that they FIT because they come in NUMERICAL sizes, not S,M,L. They also fit tight because of the flexible material, but not too tight to feel uncomfortable. I always wear a size 9 but I suggest you order a few in a size range until you determine which size is right for you. The remaining ones make good give-a-ways. | 1positive
|
Poor instructions
Whatever you do, don't throw away the package with the instructions. If you are at all like me and don't remember what you read six months ago, you cannot use this glue a second time. The majority of the tube has a different language. Oh, and the tube states, "Read complete directions on package". Useless. | 0negative
|
cheap version
this thing is effective but it is cheap as reflected in the price. It got the job done but sometimes the measurement would jump from one value to another. Unless you really dont want to spend the money i would recommend getting a nicer quality one. | 0negative
|
Useless without additional part if you own a Workmate
I purchased this vise because it was advertised to work with the Black & Decker workmate. After tearing open the cardboard packaging I spent the better part of ten minutes trying to figure out how the darn thing was supposed to attach to the workmate. I looked at the packaging carefully and finally noticed the asterisk next to the section touting workmate compatibility which spelled out the fact that the attachment screw was *OPTIONAL*. How much could it possibly cost American Tool (aka Rubbermaid) to include this little nylon screw?Now I have a useless (to me) vice for which I must attempt to locate an optional part. The maunfacturer has no convenient way to order the part through their website and none of the retailers I've found carry it. From reading the posts of others here I must assume it is possible to find this missing part, but what a hassle!If I ever have a chance to use this item on my workmate, I may revise my rating. For now, this tool earns one star... for looks. | 0negative
|
Great for Remington 1100
I was looking for an o-ring for my Remington 1100 and other places were asking $9 for 1. You get 50 of these for less than that. My great grandkids will still have these o-rings for the gun lol. | 1positive
|
Item is rough from casting
You'll have to finish this material extensively as it comes rough from casting.I would have expected a more finished material.I would not purchase it again. | 0negative
|
Excellent Service
The item was to my satisfaction, quick service (got it within 5 days) and safely packed. I would highly recommend it to anyone interested in this kind of product. | 1positive
|
Too Hard to Measure
I got this item to repair the many car coffee cups that I have that tend to dribble down my chin and onto my shirt and pants. The order did not work and I found the dimensions impossible to measure. | 0negative
|
Quality O-ring
It is just what you would expect. Works fine, looks like good stuff. I go through a bunch of these on camp fuel stoves and bottles. Viton lasts much longer than NBR. | 1positive
|
Reef Men's Leather Smoothy Sandal
The slippers are true to the size and really comfortable. I only buy reef slippers because there good quality and last a long time. | 1positive
|
Not what I was looking for.
I was looking for rings to replace lost broken or old rings on my favorite coffee travel mugs. These rings did not work. | 0negative
|
Not Sharp!
These things are hopeless! The Chinese don't even bother to sharpen off the paint on the edges. The steel is soft. They are easy to sharpen with a file - as long as you do it frequently. This design has no spurs - just a single dull cutting edge. They will bore a hole but not cleanly. | 0negative
|
Some one is reading these reviews.
I am displease the Amazons customer service. all I'm asking is that someone help me with the matter.678 983 5360 or ericlandress@gmail.com | 0negative
|
Missing crucial specification
This is a fine component, but it is impossible to tell from Kerk Motion's description if it will fit one of its own leadscrews.I ordered two of these with what appeared to be the correct leadscrew:Kerk Motion Stainless Steel Lead Screw Shaft 1" Lead, 3/8" Screw Shaft Diameter x 24" LongHowever, despite being the same diameter, the leadscrew has five starts and the nut has nine. Obviously, there are other 3/8" components listed on Amazon, but they all lack sufficient information to pair the leadscrew with the correct nut. So unless you would like to order one of each, try McMaster or some better-documented site. If you DO decide to order one of each, please leave a review so the rest of us can know which parts will work together! | 0negative
|
Kinda slow to ship (weather ?) but had what I needed.
Thanks for stocking these O-rings ; I could not find them locally. Just what I needed. Still arrived ahead of a few other items I ordered at the same time from other venders here on Amazon so I changed my review to five stars. | 1positive
|
LIES, LIES, LIES!!!
I've recently repainted the majority of my house and, like I've done in the past, I went straight for the blue tape. I've been a Scotch man most my life (adult life that is) and I'm usually loyal unless I've been burned. Well, with this hefty project underway I decided to try my hand at the new Edge Lock Blue Tape, feeling confident that it will do what it promises. In the past, using the standard Blue tape, I've never had a problem with bleeding (occasional, but nothing drastic) and so I trusted that this new breed would be better than the last. Sadly, it was worse. For a tape that promises edge lock protection, I have NEVER in my life had so much bleed through. The tape's adhesive wasn't up to par and the big reveal felt overshadowed by the noticeable bleeding. I was outraged, to put it lightly. All my hard work felt ruined by this pack of lies. If the product had been a carbon copy of the previous, that would have been a letdown but nothing detrimental. The fact remains that this product is WORSE than the one that came before it. Stay far away from this tape. Not only is it of poor quality, but it costs more than the standard Blue Tape, which works far better. | 0negative
|
It killed my neighbors, and made my son a zombie.
When I first picked up Uranium Ore for my son's science project, he wanted to make a nuclear reactor, so in his three wolf moon t-shirt, he worked tiredly at it.He picked up a spoonful of Uranium ore powder and dropped it on his three wolf moon t-shirt, the moon on the shirt started to glow and the wolves eyes turned red, and a cloud of smoke and lightning picked up items around his room, makaing them into a reactor. When he stepped out of our house with his three wolf moon t-shirt and reactor in tow, women immediatly started to crowd him, but quickly bled to death from the radiation exposue. He was appearently a walking corpse form the dead at this point, seeing he wore no NBC suit and had no teeth. The three wolf moon t-shirt kept luring the women to my son, and they started dying in piles. He won first place, however, but some guys showed up in suits and took him to some place called "gitmo". It sounds like some sort of tropical island so im sure that was his prize from the fair. We can't visit or call him though, and I need to tell him that we arn't allowed within 15 miles of our town,Pros: Upgraded three-wolf moon t-shirt, won him a lifetime vacationCons: Destroyed our town | 0negative
|
DECIVED
THOUGHT I WAS GETTING A ROLL OF THIS TAPE WE WERE GOING TO PUT ON MACK OF KIDS COSTUMES AND ITS PROBLEY 12 INCHES LONG | 0negative
|
Great Design, Poor Quality
I got these sandals after trying them on at a store and talking to my wife about hers. She bought her reefs about 6 years ago and they're still comfortable and supportive. I bought 2 pairs of these sandals as they were my every footwear for almost everyday of college. Unfortunately it seems as if the Reef quality has been declining. After buying these sandals I noticed how nice they felt and how nice the leather was. There was a break in period, normal for any sandal, especially leather. Within 3 months, however, the leather layer on the plantar surface of both sandals began to peel up from the layer beneath it. Eventually, the leather had pulled away from the front of the sandals so much that the sandal would droop down and catch the ground when walking, making it easy to trip on stairs or curbs. Also, if you ever get these sandals wet, like stepping into a puddle that gets the leather wet AT ALL, it will pull away from the sandal upon drying. Within 5 months these sandals weren't at all what they should have been, much less 6 years. The current quality is definitely not worth the money. Since then I've tried Rainbows. I've had them for 2 years. Quality is much, much better. | 0negative
|
Too many rings in a pack
The idea that the average consumer is going to want ten of these is rather unlikely, I certainly don't and don't appreciate buying ten times more than I need just to get one of them. | 0negative
|
Item is rough from casting
You'll have to finish this material extensively as it comes rough from casting.I would have expected a more finished material.I would not purchase it again. | 0negative
|
Worked Great!
I used this and it worked for my application very good quality and good pricing and also packaging. It's made well. | 1positive
|
Decent quality table
Although this is an 'import', it's really pretty good for the price.I'll start with the negatives first, since they are minor. The machining on the base (when the table is sitting horizontally) is so-so. It is a bit rough, but surprisingly doesn't affect how flat and accurate the table sits. The little locking levers feel a little flimsy when in the Unlocked position (but are ok when in the locked position). The paint... well it's not a Ferrari (but you're not buying it for looks, right?). The small adjustable reference indicator has a cheap feel, and isn't terribly useful.Ok now the good. The table surface has a very good finish. Actually most everything else has a very good finish too, from the handle to the adjustment knobs. The MT taper hole is accurate. Table turns very smoothly, both with the hand wheel and when unlocked. Out of the box, there was minimal backlash, about 1 mark on the dial, or 1 minute of angle. Markings / numbers are clear and easy to read. I measured the accuracy of the table - flatness, parallelism, etc. and it was about half of what's listed, which is great. Unit is shipped in a burly crate - no damage during transit! Machining on 'side' base (when table is vertical) is very good. Comes with 3 chunky hold down clamps. In practical use, the table is rigid enough for most light/medium duty machining. I had no vibration issues.A couple of things to note. The hand wheel hangs lower than the bottom of the unit - watch out for this when mounting it. Also, the T-slots are kind of odd... they are listed as 7/16 (and work ok with that size), but are ALMOST 1/2". The 'big end' of the slot (sorry for the non-technical term) is huge, so the standard 7/16 tee nut kind of bobbles around in it, although it does work ok. If you were to mill out the top of the T slot just a hair, you would have 1/2" T slots. I though that was weird. | 1positive
|
Too Hard to Measure
I got this item to repair the many car coffee cups that I have that tend to dribble down my chin and onto my shirt and pants. The order did not work and I found the dimensions impossible to measure. | 0negative
|
Good bits. Haven't Used Yet. Have Seen In Action.
Former FT mechanic. I just bought this set cause I'm tired of scrambling when I do need to drill into hardened metals and my standard hi speed bits dig in for about 30 seconds and they are shot. The reason I trust these is because I've seen them in action before. My friend had to drill through a GM rear disk backing plate to upgrade some wheel cylinders. Slow steady pressure was the trick. Top these off with a Drill Doctor to sharpen back up and you are almost set for life. These bits probably are over kill for the average guy just needing to drill though standard steel once every 1 to 3 years. Cobalts are for hardened steel. These are the m-35 bits. There are a m-42 more expensive even harder bits, but I tried to save some $$ as I'm not a FT mechanic anymore. Rest assured, after I use these for the first time and if I think they are not worth the money, I'll be out here with another negative review to try to save someone else any headaches. Based on what I've seen and other reviews, these Irwin bits won't disappoint. Only thing I haven't decided on is how Irwin decided to set the case up. The 3 sections of bits are plastic and removable. I grasp the concept, but not sure if ultimately I will like or dislike this feature. | 1positive
|
Looks Like an O-RIng
The O-rings arrived on time and look good. Amazon has a great selection, far better than any store I could find in town. They are marked in fractional inches, but that size is only approximate. Look in the product description and it will tell you the exact size in thousandths of an inch. | 1positive
|
PanaVise jr.
This tool is in my micro shop along with my DremelDremel 220-01 Rotary Tool Work Station. The vise has turned out to be quite useful from holding circuit boards to acting as a third hand. I modified the vise by adding large shrink tube over the ends of the vise grips. It helps to add a bit of sticky grip and prevents damage to the plastic holding surfaces. | 1positive
|
Dad Loves this thing...
I purchased the Gorilla Gripper for my dad. He seen a neighbor using one and would not quit talking about it. He is currenly using it to work on his honey do list around the house. He hasn't complained and he is planning on buying another for my husband and a second for him. | 1positive
|
No return
I though I was purchasing 6061 Aluminum tubing with a finish for a bimini top. This tubing has no finish, and was not eligable for return. I would not recommend purchasing any products from this Seller. | 0negative
|