text
stringlengths 42
6.16k
| label
class label 5
classes |
|---|---|
Nice, but no miracle
If you have been searching for an aftermarket seat for your bike you have undoubtedly already read a hundred reviews on Mustang seats; they're all true. Quality and workmanship is great and it is a significant improvement over the stock seat. Don't expect miracles though. You're not going to have 30 virgins cradling your sorry butt on a 1,000 mile run without paying the price. It is comfortable but be realistic with your expectations. For me, it is an improvement over the stock seat. I did have problems getting used to the raised rear seat pressed against the small off my back, but 500 miles later I'm beginning to get used to it. If you have the cash and butt hurt, give it a shot, you'll probably be glad you did. - Taliman 04 VTX1300 R/S | 45 stars
|
Cruiser Diamondesque Frame
Frame is very sparkly and just what i wanted for my Cadillac CTSPrice was even better.I am very pleased with this purchase. | 45 stars
|
Been using NuFinish since early eighties
I started using NuFinish since the early 80s. Very easy to use. Leaves a great shine on my cars and love watching the rain bead up. Good product. | 45 stars
|
Worked for me
I had a slow transmission leak and I heard of this online. I was sceptical but two days after I poured half of it in my trans it stopped leaking and it has been months. worked for me. | 45 stars
|
Accutire MS-4021B Standard Digital Tire Gauge Accutire MS-4021B Standard Digital Tire Gauge
Fantastic Tire Gauge, love the bright red digital readout, works great!! Makes it nice when you need air after Dark | 45 stars
|
failure after 2 months
one wire started arching after just two months forced me to replace the whole wire set. i purchased these for the name brand looks like that was a mistake. | 12 stars
|
SORE THUMB !!!
This case is a piece of crap... It is impossible to open! I'm serious. PalmOne definetly did not do any product research or testing on this item. I also cut myself with the razor sharp metal lid. My thumb is very sore from attempting to PRY the lid open. Like the other posts, you must use a toothpick or similar to pry it open. Don't use anything metal to pry it open, as it will scatch the aluminum lid or whatever it is. I want a refund. This product should be labeled a safety hazard. | 01 star
|
LifeSaver hammer it could be...
Received within 3 days. Saw Mythbusters do a test of these LifeHammers and they worked quite well cutting through the seatbealt and any of the windows EXCEPT the WINDSHIELD. Commit that to memory! In a emergency situation it will not easily crack or break the windshield, side and rear glass only. Mine is getting mounted in clear sight and access from the front seat, right in the middle of the rear seat benches so as to be easily grabbed by all! I have had experience with a stuck seat belt and they are a bitch to cut through with a semi-sharp pockt knife. | 45 stars
|
The Bone mechanic's creeper
I love this creeper. It is smooth moving around on the floor and very comfortable. LOVE IT! | 45 stars
|
Great Product, Excellent Price!
I have had this for over a month now and it works great. I installed it on my 2000 frontier and have had no problems, the tech help line can give you all the info you need about where to find the right wires to use, works great and the price was right! | 45 stars
|
Meguiars Gold Class Car Wash Shampoo and Conditioner
This would have to be the best shampoo I have ever used so far and I will be ordering on a regular basis. It's highly concentrated and gives great results. | 45 stars
|
Not direct fit
This hose was advertised as a direct fit for my RX-7. Although length and diameter are about the same from the stock hose, this one is not bent the same way and causes a kink in the hose. This kink prevents the coolant from flowing like stock, starving the engine resulting in excess temperatures. I should have spent ten more dollars and went to the dealer. | 01 star
|
Stay Warm!
My husband was so happy when these arrived. He wanted them for our RV and didn't know we could get such a large blanket for such a good price. We purchased 2 of them and couldn't be happier. We are able to save propane in the RV and stay toasty at night. | 45 stars
|
Direct replacement
This was a direct replacement for my worn hoses on my 2003 Liberty Limited. Install went great. No complaints. | 45 stars
|
some things belong in pairs
I always thought in "pairs" when I consider wheel chucks. I don't think wheel chucks are used for unicycles and everything else has at least 2 wheels. Maybe I'm over cautious but I always chuck both front and back of the wheel. So I always use at least 2 chucks. Doesn't everybody? | 01 star
|
Very impressed
WOW! I can not tell you how happy I am I took a $10 risk before spending $700 on my transmission. It took a while to funnel in but after about 15 minutes of idle time my 2005 subaru outback was good to go! No more slipping it made a remarkable difference and now my car is back to running smooth. I thought this might be some snake oil scam but I was way off. | 45 stars
|
BLUE MAGIC 850-06 LEATHER & VINYL CONDITIONER
THIS IS MY SECOND RE-ORDER FOR THIS PRODUCT - EXCELLENT, NON-GREASY ANDEASY TO APPLY PREFERABLY WITH THE AUTO TERRY CLOTHS - THE CLOTHS AFTER-WARD ARE GREAT FOR DUSTING FURNITURE AS THIS IS NOT GREASY PRODUCT. THELABEL ALSO READS FOR FURNITURE AND ON MOST OF THE PIECES I TESTED IT WORKED VERY WELL CLEANING THE WOOD AND QUICKLY REMOVING DUST AND STAINSWHICH BY THE WAY IT ALSO REMOVED STAINS AND SPILLS ON LEATHER. NOT GREASYTO THE HANDS AT ALL WHICH IS VERY IMPORTANT - ALSO SOFTENS AND SEEMS TORE-CONDITION THE LEATHER - USED IT FOR MY EXPENSIVE COACH BAG - AGAIN VERYGOOD. USED IT ON KITCHEN WOOD CUPBOARDS - AGAIN REMOVED DIRT AND STAINSESPECIALLY EXCELLENT AROUND THE HANDLE WHERE DISCOLORATIONS AND STAINSBUILD UP - ALWAYS TEST AREA BEFORE USING....I DO THIS WITH ALL PRODUCTSI USE - THIS WAY THERE ARE NO BAD EXPERIENCES... | 45 stars
|
Great chains
Used these once on a recent trip to the snow. Very easy to install and take off. Worked great. Handy storage box. | 45 stars
|
Not the best, but very good for the price.
Debated between this kit and the other K&N FITK that comes with the aluminized tubing and this cheap kit is actually better overall IMHO. If you have a 4.0L engine, this K&N kit actually intakes more air (CFM) then a 4.0L can handle so it works out really well. I now have right around an 10-15 HP increase. Not sure about overall torque increases, but you definitely can feel this kit working. Fast off the line, smoother/shorter shift timings. What most people don't do though is disconnect the negative terminal on their car battery and this is a must. You should do this (as the K&N directions say to) for at least a couple hours. Doing so resets your on-board computer's MPG ratings and overall "user driving style" calibrations. Starting off fresh with the Jeep's "Average MPG ratings" I got my Jeep back to around 15 MPG in no time and it will most likely increase even more as I drive more on the highway. Took about 150 miles of driving after the battery disconnect to get it to around 13 MPG or so of an overall average. This upgrade is the only upgrade I've done so far and it alone is a good upgrade all by itself. Although the K&N filters do come pre-lubed (Oiled), I highly recommend buying a K&N 99-5000 Aerosol Recharger Filter Care Service Kit and further lube/oil your filter included with these FITK kits in order for it to be fully lubed/oiled. May depend on the condition of your filter when buying either a new filter, or these types of kits. But mine came looking pink-ish and even near white-ish colored in some areas of the filter and you don't want this. It should be solid red/dark pink colored. That is how you know it's fully lubed/oiled as needed. Whenever you apply oil to your K&N filter(s), be sure to do this well away from your vehicle and allow it to sit outside or in your garage on cardboard or something where the access oil can drain off and allow the filter to dry (approx 4 hours or so without the aid of fans) before installing the filter into your vehicle. This way you won't have K&N oil dripping while the filter is installed onto your vehicle (K&N FITK). Also is a good idea to fully disconnect your throttle body and fully clean that if there is any dark gunk build-up inside and after your re-install the TB, spray the spring lever and the inner cup with WD40, which can allow smoother action of the throttle system and help prevent gunk build-up. Since the K&N filters can go so long in between cleaning cycles (or replacement) I highly suggest you always inspect the throttle body and clean it as needed whenever your cleaning/lubing your filter. Just becareful not to use any harsh chemicals/cleaners on the throttle body and there it has sensitive sensors installed on it. For actually cleaning the throttle body, I suggest using a Carb Cleaner spray. | 34 stars
|
Fits 2002 Ford f150 4.6L
This pulley was very easy to install. You just release the tension on the serpentine belt. Unbolt the old pulley and bolt up the new one. No more chirping under the hood. It was a tiny bit smaller than the factory pulley. That doesn't seem to be causing a problem. | 34 stars
|
Worked as advertised
Cleans metal very well, especially my caked on exhaust gunk on my exhaust tips. What is really cool is how little you actually need to get the job done as the little bit i used goes a long way. | 45 stars
|
Falling Apart
The cover was on the steering wheel for less than a month when it started falling apart. The fabric is coming detached from the plastic parts. My daughter is very upset as this cover matches her seat covers.VERY, VERY, VERY DISAPPOINTED!!!!!!!!!!!!!!!! | 01 star
|
my honda 2001 crv
Ibought this along with a bosch distributor cap and very happy with bosch products had no problems with this better then the stock honda part for 1/2 the price from dealer | 45 stars
|
better than expected!
I was very impressed with just how strong a tool this was. I have been a gerber multi tool fan for years, this is every bit a good. maybe better .too soon to tell. | 45 stars
|
Could be better
Works as advertised, but difficult to aim the lasers because the adjustment range is limited and the motion is so tight that it's difficult to accurately aim them. | 12 stars
|
Ford Steering wheel cover
I bought this because i needed to add another item to the cart so i could get the free shipping and found this steering wheel cover. Unfortunately i sold the truck before i got a chance to put this cover on. It does looks and feel good! | 45 stars
|
'98 Ford Ex XLT Cruise Ctrl Switch
THE SWITCH WAS A PERFECT FIT, HOWEVER, I HAD DONE A LOT OF RESEARCH PRIOR TO ORDERING. THE DELIVERY WAS QUICK AND THE PRICE WAS VERY GOOD. THE SWITCH CAME COMPLETE WITH THE WIRING HARNESS WHICH WAS NOT NECESSARY IN MY CASE SINCE MINE WAS STILL GOOD. BTW: I HAD BEEN TO ALL THE JUNK YARDS AND EBAY PRIOR TO ORDERING AND I'M GLAD I DID NOT FIND ONE SINCE THE NEW ONE IS OUTSTANDING. | 45 stars
|
Very convenient!
Our backseat power output in our van is way in the back in the cargo area. With this extension, my kids can charge their ipods from their seats without climbing all over or stringing chords around. The chord is pretty tightly coiled at first, so it isn't as long as it seems it should be, but it will relax a little with use. I highly recommend it! | 45 stars
|
Hopefully you'll just be seeing green on those indicators!
The obvious advantage of this product is being able to glance at your tires and establish they're correctly inflated. For that it's effective. The indicator is clear enough that I can see, without need to get up too close. Before a long journey I'll have a quick glance at both sides of the car, and know I'm good to go.The less obvious benefit comes from driving around forty five thousand miles a year, mostly on busy interstates, giving me more than ample opportunity to change flat tires in close proximity to traffic moving very quickly:Last week I felt that sinking feeling as my car's low tire pressure light went on, needless to say, just like you, I was driving exactly the posted speed limit, and not a single mile per hour faster! I pulled into the shoulder the moment it was safe to do so to check the tires.At this point I would usually glance at the four tires, see that none of them are visibly flat, give them a firm squeeze, and decide that a tire pressure sensor is playing up. Thanks to this product it showed that one of the tires was indeed slightly low. You couldn't see/feel anything wrong with the tire - so previously I'd have had no idea without taking my tire pressure gauge to each tire in turn, on the shoulder, during rain, in rush hour traffic.Now knowing none of the tires were flat, and knowing one of the tires was oddly a little low. I drove the car to the garage at the next opportunity, they showed me an impressive nail in one of the tires, they patched it, and I was on my way. (I went to Pepboys, who did this service for free - there is a bonus tip for you!)You really don't want to spend a whole load of time investigating your tires in those inopportune moments. Until my dashboard can show me exactly what the PSI is in each of my tires (rather than just a "panic!" light), a product like this is very nice to have. | 45 stars
|
Awsome
Strong arm is the way to go for replacement dampers. Better than factory with out a doubt. Well worth the $$$$$$ | 45 stars
|
Clutch adjusting rod for chevy
Great part but missing eyelet for pull back spring. Would like org part but not in system for sale or at Dealership,to old . Fits chevy from 1955 to 1963. | 34 stars
|
Dormen great product
dormen products are supper fast to install.easy install. great product. works as good or better then OEM. will buy agian. | 45 stars
|
Neat Idea that didn't work for me.
This was a neat idea that didn't really work for me. I tried it out of the box and it didn't connect. I had to get back on a PC and download updates to the unit. Once I did that it did connect and it did allow me to clear one of my error codes. I tried to set my car to a performance setting and it kept on crashing and saying that it could not save. I decided to send it back and save some time. This is a neat product that if it worked for me I would have been very happy with. I might recommend getting this from a local speed shop and trying it in the parking lot. I haven't bought another one yet.... but i will... One last thing is my car was completely shut down the next morning. I had to disconnect and reconnect the battery in order to reset and start my car. I want to give this more stars but it didn't work for me. | 23 stars
|
Fits great on 02-06 Altima 2.5S!!!!!
I was skeptical if it would fit on my 2002 Nissan Altima 2.5S, but I went ahead and ordered two of them. Everything came in the box, it was shiny and brand new! So I went ahead and installed it, first I put in the bracket things and there was space to spare. Then I put in the tips. Everything fit perfectly, and It was sturdy and well built! It makes my Altima look a million times cooler too!! I will put a couple pics of how it looks in the images for this product. | 45 stars
|
Packaging was perfect
Received my battery today via UPS. It arrived in perfect shape, there were some added cardboard inserts that provided extra protection. The battery itself fit perfectly in my car and started it right up. | 45 stars
|
Great All Around
This product was a perfect choice. I needed to replace the driver side mirror and this purchase saved me 60% off what it would have cost at the local auto parts store. It was delivered quickly, was in perfect shape, and was exactly as described. | 45 stars
|
Flimsy!!!
I bought this product for my nephew in the car. The item brok within twenty minutes of use. Nothing I did can fix it. Very flimsy and not worth the money paid for it. | 01 star
|
great for the desert sun
bought 3 of these, one for a 2010 ford edge, one for a 2009 ford f-150, and one for a 2011 subaru wrx. Fit was perfect for all except the WRX where it's good but not a perfect fit like the f-150 and edge. huge improvement on heatup in the car and blocks the dash and pillar trim from the sun. | 45 stars
|
Good product.
Bought this for my 91 Nissan I don't think it's worth what I paid for....took a lot to keep it from moving around. Looks good and fit great but the staying down part took some time and patience. | 34 stars
|
on point
I have had it for months and it has still stayed on the windshield. I can take it down without leaving marks on the windshield like the velcro would. | 45 stars
|
Good quality cables
So some question as to wire material in other reviews. Mine were 100% stranded copper, no aluminum. Got here fast. Clamps have strong springs and I used them the day they got here. Gripped the terminals well, one top post battery, one side post All in all a great set of cables. My only question is I live in Alaska so when it gets -20 how will the insulation hold up. | 34 stars
|
Size is off and don't wear in the rain
I bought these because I read good things about them. I used them for a Tough Mudder and I will use them again for a GORUCK Challenge. These gloves are pretty tough, will keep your hands protected, and will take a beating. They will also keep your hand relatively warm. However, I did order a size smaller than the recommended by Hatch's size chart and they were still too big. The knuckles don't line up at all unless I pull the fingers out an inch or so. These gloves also do not dry very well at all. You can count on them being wet for hours if they get completely saturated. | 23 stars
|
Excellent for Motorcycle!
Purchased to put onboard when riding motorcycle. It has everything except tire slim and air pump. It has a nice carrying bag to hold items to include extra room for additional items. Good choice for the money. | 34 stars
|
Highlifter lift kit for honda Foreman
I purchased this lift kit recently, and with most of everything I have ordered with Amazon it arrived within a couple days, the lift kit is easy to install for anyone with any mechanical abiltiy, the instructions were pretty rough, but it only took me about an hour to install it, and it did raise my four wheeler, the downside to it is it made my suspension very ridgid, and rough riding, but I was able to install a set of 27x12x12, all the way around. Overall the product did exactly what it was suppose to. | 34 stars
|
Trailer light extension cord
Bought for another purpose than use with a trailer, but it serves the need perfectly. The wires are flexible, the connectors are tight on whatever other four-flat I have mated it with on either end. | 45 stars
|
Absolutely regret ordering
Product might have been OK when it was new. I got a package that had been opened and re-taped, was missing the rope ties and instructions that were supposed to be in the box, and it looked like the box had been cut to remove the UPC symbols. I might expect that from a third party vendor but this shipped from Amazon. Totally unsatisfactory. I was already out at my RV and rain was on the way so I kept it - otherwise I would have returned it. | 01 star
|
Great Set of High Quality Lights
This is an excellent product. KC has been around for years, and continues to make great equipment. The wiring harness is top quality. The wiring comes protected by an additional layer of insulation to keep the wires from rubbing or chafing against any sharp edges during or after installation. All the necessary parts are included, and the wiring harness and lights all have quick connect terminals for ease of connection. I have purchased KC lights before, but it is still incredible to see exactly how bright they really are. I would recommend these to anyone. | 45 stars
|
Great for any engine, especially boxers.
I have 2 Subarus. A Forester and a Legacy GT. The spark plugs are right up against the fender wells and not the easiest to get to by any stretch. This thing makes it a much easier job and no worries about stripping out the threads once they're in there. It will work with any type of engine though. | 45 stars
|
It saved my back!
I had pulled a muscle in my back. I have an hour drive to work. Getting out of the car was a struggle for me after sitting in the cold seat for an hour - with back problem. I ordered this heat cusion and it saved my back! The delivery could not be better. It's on sale now. I'm buying another one just incase mine stops working ever. | 45 stars
|
Dorman 620-106 Radiator Fan Assembly
Regarding the "Dorman 620-106 Radiator Fan Assembly" which I purchased, it arrived in great condition. It was a perfect fitup. I installed it and had a little problem getting it going which turned out to be a problem with my wiring connector. Seems like it should do the trick! The price was exceptional and as always, the Free Super Saver Shipping is a real bonus! | 45 stars
|
This works flawlessly!!!
For the price of these versus aftermarket, I will never buy aftermarket again. Tired of all the squeaky, chattering stuff. For Ford owners, Motorcraft parts are the way to go. | 45 stars
|
Works as Good as My 20 Year Old One
I've had one of these for about 20 years. It still works great but the addition of a couple new cars in the family prompted the need for another. It works good on any smooth surface or pulling something out of the carpet. But it works really great on a nice, waxed car. Lay it out like a sheet on horizontal surface and pull slowly to get all the water in one pass. Wring it out like your life depended on it and will dry the whole side of your car before it needs another wring. | 45 stars
|
Flowmaster 17208 Cat-back Sys for 5.2L 1998 Durango
I purchased the Flowmaster 17208 Cat-back System for my 5.2L 1998 Dodge Durango after spending some time on the Flowmaster muffler web site. I have ordered books from Amazon.com for several years but never an automotive part; so I was a bit reluctant to order, especially something this big. The complete, assembled Cat-Back system arrived in good shape, due to the large sturdy box it was shipped in. The item fit properly and installed without any glitches. I like the low rumble sound, just right for SUV (If a pickup truck, a little louder would be good for me). I am very satisfied with this product and would order something like this again when needed. | 45 stars
|
The PERFECT ice scraper
It may seem a little foolish to bother with writing a review of something as cheap and comparatively insignificant as a simple windshield ice scraper. But I've been frustrated for years with every single plastic bladed scraper I've ever bought, until I saw this one for sale. The first thought of course is "Oh no! The metal blade will scratch the safety glass!" but this blade is of a softer metal than the glass coating. What's so great about it is that being metal, and thin, it shaves the ice off the windows perfectly, effortlessly, and neatly, almost as if the blade was heated or something. Buy one for every car & truck you own. Of course a bigger longer brush type window cleaner is much better for removing accumulated snow, but just for ice or especially heavy frost, this scraper is PERFECT. | 45 stars
|
Deceptive advertising!
I agree with Troy. In addition, the picture is misleading by not showing the type of electrical connection. It turns out that this product is not a standard 120 plug, (U.S.) It appears to be a 220 volt plug and renders it unusable to the average consumer. Even though I have the ability to make it work, I do not have the interest or time and do not recommend this product.Get Real!T.L. | 01 star
|
Awesome filter!
Arrived in perfect condition, you can definitely feel the difference from the OEM filter. 1000% recommended. | 45 stars
|
Happy to join the pool of satisfied users!
Purchased it for charging my new bike during its winter storage. Did lots of research before deciding not to go with the CAN bus based charger but this. Everything worked as mentioned. I am happy as my garage queen's happy. | 45 stars
|
excellent value
Don't pay 30 to 100 dollars to have your check engine light diagnosed. This does everything as advertised. | 45 stars
|
Why switch to something else?
I've been using this product on my cars for 20 years. Easy to apply, shine is brilliant! I try to use twice-a-year; however, I waited a year before polishing my 2008 RAV4 with this polish. Honestly folks, water was still beading on the car after a year with this polish on it! | 45 stars
|
Poor Quality
The seat covers started coming loose at the seams immediately upon putting them on the seats. | 12 stars
|
Too big and very bad finish
This cup holder is very big. Is impossible use between the console and the seats.The plastic is very cheap. | 01 star
|
Unacceptable Quality
I bought one of these and put it on...it broke the second time I latched it. I bought another one and installed it (Thinking I may have just got at bad part)...it broke the first time I latched it. This part is very cheaply made, but it's the only rear window latch that I was able to find at two different auto parts stores. | 01 star
|
Wonderful nozzle, tested at the fair first, love it!
I love this thing! I tested it at the state fair before buying it. I regreted not going back and getting it when we got home and decided to try and find it online. I even saved money having it shipped...woo hoo! | 45 stars
|
Buyer be carful
This product is very well made BUT I found out that even if it looks like all you get all seat covers you DO NOT (maybe my own bad) I thoughtI would receive covers for all 4 ! - No I got only the real covers - True I should of saw where it said Custom seat cover NOT covers ! So I will say thisReview is only to help others who may make the same error I have - The product as I said is very nice BUT I didn't want to spend 400 $ just yet, IReturned the item under reason - item received was not as shown as on website as the image shows ALL seats - Please understand Im not saying theseAre not a good product Im just saying be aware you only get the one - Very confusing to shop this item !!MichaelHope this was of some help | 45 stars
|
Bad Buy
Ordered this item twice, returned twice. Came broken both times and broke in same place. Poorly Packaged. Amazon representative said since it was likely to come broke on third try, they refunded purchase price. Purchased a well packaged one from TNA Parts, California, with one try. | 01 star
|
2005 Tahoe
I originally had a AEM intake system but the dryflow filter seemed more like the paper filters due to having to constantly clean them. I decided to switch to the K&N, and i should have bought K&N to begin with, this filter will fit any intake with the diameter specified for tahoe, I used this filter on the stock AEM chrome tubing and fits wonderful, actually better. The airflow is way better over AEM, because it does allow more air through. Some say to hold filter up to the light and you'll see "holes", well true but very small. In my opinion this allows for better air flow and anyway have you seen the factory intake and the gaps where crap can come in!! If your wanting to filter to micron then stick to paper filters i guess, which are useless, if you want more air then go with K&N, nothing better. For intake tubing go with aluminum, and stay away from plastic, any BRAND! | 45 stars
|
Arrived on time and as described
The correct item for my car was shipped and received. The Dorman 741-643 Oldsmobile/Pontiac Front Driver Side Power Window Regulator with Motor looked new and worked perfectly after installed. | 45 stars
|
Great product, if they send the right product.
I ordered Weathertech Extreme Liners for my 2011 Tacoma DC Sport last week. I made sure that I was specific, and double checked the item description, but I ended up getting front liners for a Dodge Dakota, and rear liners for a Buick Acadia. I'm disappointed. Customer service was great, and sent me a shipping label to send the floor liners back, but come on. I got a refund and am ordering these from Autoanything.com. | 12 stars
|
Liftgate Struts are Easy
The dealer quoted me $200 for parts and labor for this job, including 0.4 hrs at over $100 per hour shop rate. I got a pair of these for under $40 in two days (Prime Member) and it literally took about TWO MINUTES each to cnange them myself. The liftgate kept hitting me in the head while unloading groceries before. Now it pops up as soon as I pull it a couple inches open and stays there by itself. If you have a drooping liftgate I highly recommend you replace the struts yourself with these fine parts! | 45 stars
|
good product
good very durable, fits just right, kinda flimbsy however on the sides. Needed some time also to come undone from the rolled up fashion it arrived as in the box. Good overall just not super thick and havy duty. | 34 stars
|
A little peace of mind
Good filter for the price... I replaced my old water fuel separater with this unit as normal maintenance woork as it should. | 45 stars
|
true product
I bought this Back Booster for work. I received it immediately, and it works exactly like the description. Great support, never deflates. It was not very easy to inflate, though, like the review notes. I blew it up and it took more than a few breaths. Overall, I would recommend it. | 34 stars
|
cleans carrand!
sturdy-light weight- soft bristles- great reach capabilityit is what they said it would benot magic though-you still have to put it in your hands and wash the vehicle | 45 stars
|
It's okay
Short answer, replaced a crappy jeep horn with this (not so) bad boy.I didn't have high expectations when ordering it and was only slightly disappointed after installing.But that's not why I am writing.The first horn I got would only work once and then -- no more BlaHTs.I got it replaced, but the second was doing the same thing -- until I realized it was blowing fuses.I switched from a 10 amp default fuse to a 15 amp -- and so far, so good.Still a cheap, funky sounding horn, but hey -- at least it is still working now. | 23 stars
|
Excellent Product
Have used these for years, best charger I have found.It will keep your battery charged winter and summer. It will also extend the life of you battery. | 45 stars
|
Terrible!
The optics on this are terrible. The image is so small - i couldn't even tell if my baby had her eyes open or not. If you want to see what's happening you'ld have to really stare into it and squint - and by that time you'ld probably have crashed into something. Would have given this zero stars if possible. Terrible terrible terrible. Not sure any other options are any better though but still don't use it because i think it's dangerous. | 01 star
|
for my 2004 volusia
product fit and performed as expected and price was also good.I replaced the oem filter with this one and rejetted carbuerator which was neccessary. bike has more power in high gear. | 45 stars
|
Locking Mechanism Too Tall
Haven't tried out long enough but the blade seems to be of high quality. It works pretty well so far (i.e. no streak). My only complaint is for such a high-end wiper blade, the design of the U locking mechanism is too tall and thus looks ugly/obstructive on my Lexus IS-350. The original blade is 1" high (at the middle) while the Valeo is 1.375" tall at the plastic U lock.Decided to cancel delivery of the companion 22". Will use the old blade and buy refill from dealer instead.PS. The refill rubber costs slightly over $5 at Toyota dealer (not sure if Lexus dealer charges more for the same part!) and works perfectly fine. | 23 stars
|
COMPRESSOR REVIEW
Unit is exactly what I expected. It came with the necessary O-rings and 5-oz of PAG oil inside unit. This unit CAN be used for the old R-12. However, you must pour out all of the oil and purge it of the PAG oil if you are using mineral oil based lubricant for R-12. In my case, I cycled Motorcraft YN-9-A several times through the unit before filling it with the final 5-oz. of YN-9-A. New unit runs extremely quit compared to the loud sewing machine of the old unit. The new casting is a 2010 as opposed to my 1995 housing(dealer installed during TBC recall on original unit). After nearly 500k miles on the original unit, the oriface tube had only a meager amount of piston ring shavings. Nevertheless, I still replaced everything forward of the firewall which is the safest way (No flushing - ain't worth it!) As of 9/25/12, the labor and R-12 to evacuate/fill my system in Southern California was $196.00 for 1.85lbs of refrigerant.One point regarding the aftermarket liquid line and manifold hose assembly for a 1994 Explorer application. All of the fitting are aluminum as opposed to coated steel. The hoses are made in Korea as opposed to Goodyear on the Motorcraft original. and lastly the machining on the hose manifold is of higher quality on the OEM. | 45 stars
|
Not as expected
I was under the impresion that I was to recieve hardware (nuts,bolts,pins exc.). WRONG just the part (not bad I guess) but I had to reuse the old hardware or buy new ones. Overall I would say not a good transaction. | 01 star
|
Strong, blk. Panel
Does what it promises to do. | 45 stars
|
Can't Trickle Charge My Car Battery; Will Jump A Dead Battery-See Manual Instructions
APRIL 2012 UPDATE:I ordered this primarily to be a trickle charger/maintenance charger for my Mazda Miata's small battery and to jump start it when needed. Its primary purpose was to be a trickle charger. The jump feature was simply an added bonus, but not necessary. However, for a jump feature I was looking for one that could start a dead battery.The Schumacher SC-8000A Speedcharge Charger/Maintainer is not meant to be used as a 2-amp trickle charger for an automobile, but that was not clear until I received the item and read the instruction manual.My Mazda battery is a small battery by car standards, but per Schumacher's instruction manual for the Model SC-8000A, a "small" battery is defined as "those commonly used in garden tractors, snow mobiles and motorcycles."By Schumacher standards, my battery is a "regular"/"larger" battery and per the instructions, it will charge my Mazda Miata car battery at 12-30 amps, not 2 amps. It is not meant to charge my car's battery at the 2-amp rate. The instructions for the Schumacher SC-8000A Speedcharge Charger/Maintainerinstructions state:"The 2A rate is not intended to be used as a trickle charger for larger batteries."I am returning it and instead getting theBattery Tender Plus, which with its slow 1.25-amp charge will not harm my car's battery. From speaking with mechanics at the Mazda dealership, it is not a good idea to charge my Miata's relatively small battery (when compared to the size of other car and truck batteries) at a rate of 12 amps to 30 amps. I realize the Battery Tender Plus is not a jump starter, but it is a trickle charger, and I need a trickle charger that won't harm my small battery. A jump starter is not my primary need at this time. The mechanics at the Mazda dealership told me at a 1.25-amp trickle charge will not harm my battery, but they said a 2-amp charge could harm it and so could a 12 amp to 30 amp charge. This is what they told me. Your mechanic may tell you differently, so please check with your mechanic if you have any questions about your particular situation. Your car battery may be just fine with this charger using it as a trickle charger, so please check with your mechanic or the battery manufacturer.Here are the instructions as printed on page 9 of the instruction manual for the Schumacher SC-8000A Speedcharge:~~~~~"CHARGE SET BUTTONUse this button to set the maximum charge rate to one of the following:*SMALL BATTERY: Provides a charge rate of up to 2A. Intended for charging small batteries such as those commonly used in garden tractors, snow mobiles and motorcycles. ***The 2A rate is not intended to be used as a trickle charger for larger batteries.****REGULAR BATTERY: Provides a charge rate of up to 12A-30A depending on the battery. Use for charging normal or large batteries. Not intended for industrial applications."~~~~~Other things I noticed about this product: I mention a couple of these points for people who aren't mechanically oriented. If you are the least bit mechanically oriented, you won't have any problem.1. To operate the Schumacher SC-8000A Speedcharge Charger/Maintainer, you must know what kind of battery you have. The SC-8000A has 4 settings: 12V Regular, 12V Deep Cycle, 12V AGM/Gel, and 6V Regular. My Miata battery is a 12V AGM/Gel. A lot of you probably know what type of battery you have. If you don't know, you may have to do a little research. With theBattery Tender Plus, (for those of you only looking for a trickle charger and no jumper) no research is necessary. Just connect the positive and negative clamps to your battery and you are set. If all you are looking for is a trickle charger, which in my case was the most important thing, then this turned out to be a good solution for me.2. When using the Schumacher SC-8000A, if it is a negative-grounded system, you connect the red (positive) output clamp to the positive post, but the negative clamp *cannot* and *must not* be connected to the negative post. You have to connect the negative clamp to, according to the SC-8000A's instructions, "a heavy, unpainted metal part of the chassis or engine block, away from the battery." And "DO NOT connect clamp to negative battery post, carburetor, fuel line or sheet metal part." Since my Miata's battery is located in the trunk, near no engine parts nor other metal parts, there is nothing to clip the negative clamp onto besides the trunk, which I can't do since it cannot be connected to a "sheet metal part." There is nothing else for the negative clamp to be connected to in my trunk. Most people won't have this problem; it may be unique to Miatas and a few other cars.3. This Schumacher product is larger and heavier than I anticipated. TheBattery Tender Plusis extremely small and lightweight. If you end up just wanting a trickle charger, and both are options, this may matter to you.4. IMPORTANT NOTE: ***For those who want to use this to jump a completely dead battery, per a Schumacher representative, it can be done using the following steps:A. Connect charger to battery.B. Hold down the charge rate button. While you hold this down, plug the charger in to electrical power source.C. Let the button go once the charger is plugged in.D. This sets it in "manual mode." Leave it on Manual Mode for about 2-3 minutes.E. Unplug from electrical power source (while leaving it still connected to battery).F. Replug back in to electrical power source. The surge inside will activate the charging mode in a completely dead battery.Please see attached photos of the size difference between the Schumacher SC-8000A Speedcharge Charger/Maintainer and the Battery Tender Plus. | 23 stars
|
Schumacher Model SE-82-6 6/2A Dual Rate Charger
I bough this charger new about 12 years ago for $30. So the price hasn't change much over the years. It started intermitting about 5 years ago. You could pick it up and let it drop about a foot and it would start working again. It got where it just wouldn't charge at all so I took it apart.Turns out there is a design flaw in the Schumacher Heat Sink Dual Diode Assembly. The charger uses a pop rivet to mount the rectifier (Diode) to the metal heat sink. The heat sink is also used for current flow through the Single Pole Thermal Type Breaker to the positive side of the battery cable. As time passes oxidation and heat causes the resistance to increase between the Diodes and the heat sink. This can results in an intermitting charge and in time total failure.I found a new replacement Schumacher Heat Sink Dual Diode Assembly but it cost over $30 which is about what I paid for new charge.I repaired the old assembly by removing it, drilling out the pop rivet and cleaning the Diode and heatsink contacts, sanding the heatsink contact surface and using an Oxide inhibitor like DE-OX on the contact. I also used a small nut and bolt in place of the pop rivet.The charger now work like new. I would hope by now Schumacher would have corrected this problem. Since I don't have a new model to check I have no idea. All in all I think this model SE-82-6 is over rated. After finding the problem it was hard for me to believe it was made in USA. | 12 stars
|
Great Product
It fits well to a 99/2000 Subaru Impreza Turbo GT. It has solved my problem with the idle engine running awkward.Excellent shipping and good timing. | 45 stars
|
VERY POORLY MADE. DO NOT BUY!
I originally purchased this gun at Costco, and loved how it worked. However, after only using for 1 month, it broke. I returned it to Costco, but they no longer carried the item, so I started searching for it online. This one lasted only a month also. Last week, the trigger stopped working (the same as the first gun). Today, I unscrewed the soap dispenser to check the soal level, and the threads have totally disintegrated, so I cannot put the cap back on. Very poorly made. DO NOT BUY! | 34 stars
|
May not be wide enough for your car
This grip is perfect. Need a little patience when installing it yourself. I like this kind of tiny DIY. At last, probably this one will not be wide enough to cover your wheel. The wheel in my Nissan has normal thickness but about half an inch is left uncovered. But that really does not matter. | 45 stars
|
Dayco No Slack Pulley - False Advertising!!! MADE in CHINA!!!
Box says Made in USA, but the bearing says CHINA. The "new" chinese bearing was already leaking when it was taken out of the box. Save yourself the time and expense of having to redo your work in a few months. Avoid Dayco No Slack/No Truth Pulleys with their chinese bearings. Dayco is no longer a "name brand" or American made! | 01 star
|
Fairly easy to install...
I too have an 03 ZX3 with excessive rear camber. After receiving the Moog plate set...I decided not to use both the 1/2 * and the 1* plates on each wheel. Why? Because Moog doesn't actually recommend it...the instruction sheet says to use either the 1/2* or the 1* plates. Using these plates put a "sideload" on the bolt heads holding the rear spindle on the car...maybe 1.5* is a little too much??? At any rate they were fairly easy to install. I didn't use the rivets...I did RTV the plates in place over the old rivets. The (4) bolts do all the holding in place.I also added a "rubber donut" to each coil spring. This raises the suspension slightly (helps sagging springs)...stiffens the spring...and might reduce camber by maybe 1/2* or so. They also reduce "rolling" of the car on corners...which tends to wear the tires more.note: you do not get 8 bolts...only 4...you reuse 2 of the originals on each wheel. | 34 stars
|
Lucky Gold Box Buyers
I was Very Lucky to order one of these today on the Gold Box Special, I looked it up on their web site, and downloaded the manual,Questions about this comment ?, See my Response Comment below in the RETURN Comment Link !,, It explains alot. | 45 stars
|
Great So Far.
I installed these on a 2000 Lincoln Continental to replace a set of Rain-X Weatherbeaters. After almost a week of solid use I can say these blades are superior in every way. Hopefully these last because my previous Rain-X were in shambles by the one year mark.If these degrade drastically in the coming months I'll update my review; for now I'm satisfied. | 45 stars
|
Best Purchase!
These air fresheners are STRONG!Follow the instructions on the package and your tree will last for weeks! If you don't follow the instructions and take the whole tree out of the package, the smell is very strong and overwhelming (I ended up with a headache), also the tree is not going to last as long. Its a great purchase and cheaper than buying them at the store too! | 45 stars
|
YUASA motorcycle battery
This is a wet cell battery. Battery acid was not included. Be carefull to make sure they include battery acid if you choose to purchase this battery. | 23 stars
|
Throaty sound, more power
Length:: 0:11 MinsThis is what it sounds like sucking all the extra air. Before the FIPK all i heard was engine rev. This really opens up the air flow and allows a lot of combustion chamber echo back down the air intake, which in turn gives a VERY throaty sound when the engine is loaded. You will not notice the "growl" parked. When I finished up and took it out for a test run, the first time i mashed it, the sound half startled me. it sounds like it has duals now. My 0-60 dropped 1 full second to 9.6sec by adding this and the Airaid Poweraid. I also worked over my factory throttle body and now get about 2-3mpg better (25-27mpg) cruising on the interstate at 70mph. The best part is that off the line it is quite noticeable as well as quicker to get around when passing others. | 45 stars
|
OEM paper filter failed, time to try K&N
On a recent dualsport ride on my BMW R11550GS, I filled my airbox with dirty water during a water crossing. The snorkle shot enough water at the paper airfilter to push it out of the way and allow the airbox to fill with dirty water. I drained the airbox a few miles later, but obviously the wimpy OEM paper filter needed to go. The K&N is much more robust than the OEM filter and made of material that should resist water much better than paper. Time to go back to the dirt for more creek crossings! | 45 stars
|
Solar Trickle Charger
This product is working great. I have it on a battery for a hydraulic dump trailer that is only used occasionally. It is keeping the battery charged and I am really pleased with the solar trickle charger. | 45 stars
|
Thought about it
Was thinking of buying this, but my manual says any good quality SAE 30 detergent oil is fine, and I could even get a quart of synthetic 10W-30 (which can also stand up to higher temps) for less. Maybe good value for some who think they need or want OEM. | 12 stars
|
Better than a trip down a spiral staircase at night
We bought this toilet to take on vacation with us for two weeks. We were staying in an A frame cottage with one bathroom with our family of nine. My husband and I put this toilet in our bedroom that was upstairs - up a little spiral staircase. It was very nice to not have to come down the staircase at night. The toilet traps odors VERY well. It never made our room have a bad odor. We emptied it every day, and I will admit that that was not a pleasant job, but we decided it was worth it. Do buy deodorizer. That makes the emptying job less disgusting. I am 46, and a bit pudgy, and using the toilet was no problem for me. I could not have used it easily last summer, when I weighed 50 pounds more, however. It is a little low to the ground, so someone who is not spry might not be able to use it easily. | 34 stars
|
Great step-up for old stock rotors
With the Brembo name, you can't go wrong. These rotors do not need to be balanced or turned when taking them out of the box. You can just put these rotors on with some new pads and you are good to go. I want to emphasize that these rotors are not slotted or drilled. These are just Brembo's stock replacement rotors. To find out which item number are the drilled and slotted rotors, go to the Brembo web site and check their catalog. 27041 is the plain rotor number, 37041 is for slotted, and 47041 is for the drilled rotors (for XJ Jeep Cherokee front rotors). One thing is for sure though, these are an excellent replacement over your stock rotors. | 45 stars
|
Excellent
O ítem é excelente, muito útil, prático e um designe avanado... Muito boa compra... Gostei muito... Compraria novamente se necessário... | 45 stars
|
It fits
After installing my 24mm adjustable Progress sway bar, I ran into a squeaky problem. Nearly every bump or lean I encounter, the rear of the car makes a squeaking / creaking sound thats fairly noticeable.Doing online research, I found that I wasn't in this boat alone. Some of those who have installed the sway bar, had the same problem, said the problem came from either:1) End links2) Rear Lower Control Arm3) Urethane BushingsMost of the people said that buying Energy Suspension Bushings would do the job. After buying and installing these ES bushings with a generous amount of white lithium grease, only little change was noticeable. The noise is still there for me, but others have said it worked.On the plus side, the red looks cooler and the zerk fittings help re-greasing easier (that is, if you have a grease gun).(If you have the squeaking problem: and before you invest in these, you might want to consider re-torquing the bolts that hold the bushings in place to correct specs. Then check the end links. clean, and spray silicon lube over them and see if that doesn't solve the problem. If still there, try the ES bushings). | 34 stars
|