id
stringlengths 7
13
| title
stringlengths 7
396
| type
stringclasses 2
values | version
stringclasses 245
values | url
stringlengths 90
98
| scope
stringlengths 0
83.8k
|
|---|---|---|---|---|---|
102 021-10
|
<empty>
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102000_102099/10202110/01.01.01_60/tr_10202110v010101p.pdf
|
The present document provides the User Requirement Specifications for the TETRA Local Mode Broadband. To improve TETRA on-site communication capabilities, the LMB aims at allowing the intervention teams to dynamically deploy an ad-hoc wireless network within the incident area, supporting voice, video and data communication (e.g. sensor-based data such as oxygen, gas, temperature). The ad-hoc wireless network should be made robust and redundant, securely supporting intervention teams of different disciplines within the same incident area. This ad-hoc wireless network should be capable of being securely connected, extended and integrated into the into a larger outdoor TETRA network. NOTE: Further study may be required before a standardization effort is initiated.
|
102 079
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); System Reference Document for licence-exempt Fixed Wireless Access (HIPERMAN) for band C (5,725 GHz to 5,875 GHz)
|
TR
|
1.1.2
|
http://www.etsi.org/deliver/etsi_tr/102000_102099/102079/01.01.02_60/tr_102079v010102p.pdf
|
The present document contains functional requirements for licence-exempt FWA in general and a basic sharing and interference assessment based on [1] to investigate feasibility of providing licence-exempt FWA in the band 5,725 GHz to 5,875 GHz. It also proposes terms to facilitate this sharing and describes expected market information and compatibility issues. The present document defines those requirements for Licence Exempt Fixed Wireless Access (FWA), which can affect radio frequencies in the sense of the international Radio Regulations. It includes necessary information to support the co-operation between ETSI and the Electronic Communications Committee (ECC) of the European Conference of Post and Telecommunications administrations (CEPT), including: • Detailed market information (annex A); • Technical information (annex B); • Expected compatibility issues (annex C).
|
102 021-8
|
<empty>
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102000_102099/10202108/01.01.01_60/tr_10202108v010101p.pdf
|
The present document provides the user requirements for a TETRA-based AGA service. The present document is applicable to the specification of TETRA Release 2 equipment. The AGA User Requirements Specification contained in the present document are based on a study by EPT WG1 which reviewed previous user requirements documentation and considered ongoing implementation work.
|
102 021-7
|
<empty>
|
TR
|
1.3.1
|
http://www.etsi.org/deliver/etsi_tr/102000_102099/10202107/01.03.01_60/tr_10202107v010301p.pdf
|
The present document contains the User Requirements Specifications (URS) which are described in non-technical terms. Although high level requirements are proposed by the present document, it is considered restrictive to mandate particular security implementations at this point, until a revised threat analysis has been undertaken. The present document is applicable to the specification of TETRA Release 2.1 equipment.
|
102 021-6
|
<empty>
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/102000_102099/10202106/01.02.01_60/tr_10202106v010201p.pdf
|
The present document defines the user requirements for Smart Card (SC) and Subscriber Identity Module (SIM) and is applicable to the specification of TETRA Release 2.1 equipment.
|
102 021-5
|
<empty>
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/102000_102099/10202105/01.02.01_60/tr_10202105v010201p.pdf
|
The user requirements contained in this URS are described in non-technical terms and are based on an analysis of the results for air interface enhancements from the TETRA Release 2 Market Questionnaire, described in TR 102 021-1 [i.1], clauses 4.2 and 4.3 and the Future of TETRA workshop held during the TETRA World Congress 2007, TR 102 621 [i.2]. The present document provides the user requirements for TETRA interworking and roaming. The present document is applicable to the specification of TETRA Release 2.1 equipment.
|
102 100
|
Network Aspects (NA); Interworking framework
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102100_102199/102100/01.01.01_60/tr_102100v010101p.pdf
|
The present document is part A of the ETSI SRC6 report [1] dealing with the European Information Infrastructure (EII). It comprises a number of recommendations indicating the need to develop standards in the area of interworking between a number of existing and emerging access networks and core network types. In particular: - Recommendation 21 states: "SRC6 recommends that ETSI prepares those new interface standards which may be necessary to allow the federation of networks that will form the EII to interwork as efficiently as possible"; - Recommendation 24 addresses Internet and TCP/IP and the use of these platforms for the support of non-real time traffic in the EII. A number of possible combinations of interconnecting access and core networks is given in Chapter B.5 and especially Figures 5.3 and 5.4. The scope of this report is restricted to the transport and control platform as defined in this section of the SRC6 report [1]. The primary objective of this report is to prepare the EPII Project 1.3 by analysing the state of the art and defining a master plan for further standardization work. It focuses a small number of interworking cases for which urgent action is required. It is to be noted that a number of related aspects are covered by other EPII Projects, especially Project 1.4 on EBTN and Project 1.6 on IN/TMN support for the EII.
|
102 021-3
|
Terrestrial Trunked Radio (TETRA); User Requirement Specification TETRA Release 2; Part 3: Codec
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102000_102099/10202103/01.01.01_60/tr_10202103v010101p.pdf
|
The present document provides the user requirements for enhancement of Codec. The main requirements in such an enhancement are the following: • improved end-to-end delay performance; • voice quality improvement over the existing TETRA codec; • equal or better immunity to background noise; • interworking with GSM/UMTS (no double vocoding); • interoperability with the existing TETRA codec; The present document is applicable to the specification of TETRA Release 2 equipment. The user requirements contained in this URS are described in non-technical terms and are based on an analysis of the results for the voice codec from the TETRA Release 2 Market Questionnaire (see bibliography), described in TR 102 021-1 [1], clauses 4.2 and 4.3.
|
102 021-2
|
<empty>
|
TR
|
1.3.1
|
http://www.etsi.org/deliver/etsi_tr/102000_102099/10202102/01.03.01_60/tr_10202102v010301p.pdf
|
The present document contains the User Requirements Specifications (URS) which are described in non-technical terms and are based on an analysis of the results for High Speed Data from the TETRA Release 2 Market Questionnaire, described in TR 102 021-1 [i.1], clauses 4.2 and 4.3, subsequent results from a joint ETSI/TETRA MoU High Speed Data Workshop held in January 2002, and the Future of TETRA workshop held during the TETRA World Congress 2007 [i.2]. This URS does not offer any technical solutions as they are considered the responsibility of TC TETRA/WG4. The present document provides the user requirements for HSD translated into terms of: • HSD applications and net data rates to support non-voice applications • Data rate capacity in addition to TETRA V+D • RF coverage requirements for HSD • Frequency spectrum efficiency requirements • Integration of HSD with TETRA Release 1 V+D services • Compatibility of HSD with TETRA Release 1 V+D services • HSD call types • Backward Compatibility with TETRA Release 1 • Migration from TETRA Release 1 • Availability of HSD • Relative importance of HSD user requirement criteria The present document is applicable to the specification of TETRA Release 2.1 equipment.
|
102 021-1
|
<empty>
|
TR
|
1.3.1
|
http://www.etsi.org/deliver/etsi_tr/102000_102099/10202101/01.03.01_60/tr_10202101v010301p.pdf
|
The present document outlines the process employed by TC TETRA Working Group 1 in generating user requirements in general, and the methodology used for creating User Requirements Specifications (URSs) for Release 2.1 in particular. It also covers the process of identifying interdependencies, which is considered important for ensuring that various stand-alone URSs fit together into an integrated and coherent URS for TETRA Release 2.1 as a whole. The present document is applicable to the specification of TETRA Release 2.1 equipment. NOTE: Some of the parts may stay as TETRA Release 2, but are part of the present set of URSs. Each of the work areas of the TETRA Release 2.1 programme is covered by its own stand-alone URS. The URSs were produced by the membership of WG1, who are responsible for capturing and defining user requirements for TETRA.
|
102 019
|
Services and Protocols for Advanced Networks (SPAN); Design requirements for ITU J.arch, J.istp and J.tgcp
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102000_102099/102019/01.01.01_60/tr_102019v010101p.pdf
|
The present document specifies the design and specification requirements obtained from reverse engineering a set of ITU recommendations, consisting of J.arch (architectural framework), J.istp (IPCablecom Signalling Transfer Protocol), and J.tgcp (Trunking Gateway Control Protocol). These documents are part of a set of ITU documents describing the IPCablecom framework and its subparts. These documents are based on the PacketCable 1.0 specifications written by CableLabs in the United States, and modified to meet more global requirements and formatting conventions of the ITU. The requirements obtained from reversed the specified documents can be explicitly listed or implied, commercial or technical. The present document does not contain all of the IPCablecom requirements, which cover a set of documents addressing additional areas of quality of service, security, lawful intercept, network interface, remote digital thermals, on network call singling, managed object provisioning, event messaging, and other major areas. Some operator requirements (example: billing, OSS presentation, etc.) are deliberately not covered in IPCablecom; these are considered normal to vendor/operation (RFQ/RFI) negotiations to meet subscriber needs in a market. These operational requirements are not covered here except where they are defined in the source documentation. In the present document, all requirements have been presented with "MUST", "SHALL", "SHOULD", or "MAY" as the active verb. "It" in the present document when coupled to a requirement refers to IPCablecom in general. In particular, must and must no were used instead of shall or shall not to specify requirements, should or should not were used to specify recommendations, may or may not were used to specify permissions or possibilities, and can or can not were not used to specify possibly. The present document contains the original requirements as created for the PacketCable 1.0 specifications (written by CableLabs in the United States). These base requirements can be realized by using other protocol stacks and are not restricted to those specified in the present document. The base requirements that are implied by the protocols should be included in any protocol implementation.
|
102 016
|
Services and Protocols for Advanced Networks (SPAN); Integrated Services Digital Network (ISDN); Potential solutions to support the transmission of PPP
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102000_102099/102016/01.01.01_60/tr_102016v010101p.pdf
|
The present document gives guidance on potential solutions to support the tranmission of Point-to-Point Protocol (PPP) packets over the D channel of an ISDN access without the need of an X.25 virtual circuit as used and defined in the Always On/Dynamic ISDN (AO/DI) [1] networking service.
|
102 015
|
Human Factors (HF); Supplementary Services; A review of ETSI deliverables
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102000_102099/102015/01.01.01_60/tr_102015v010101p.pdf
|
The present document gives the results of a review of the current TC-HF deliverables on Supplementary Services and makes recommendations for improvement.
|
102 010
|
Digital Enhanced Cordless Telecommunications (DECT); DECT access to IP networks;
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102000_102099/102010/01.01.01_60/tr_102010v010101p.pdf
|
The present document describes the scenarios, services and related features for a wireless access to IP-networks using the Digital Enhanced Cordless Telecommunications (DECT) system. The reference configuration, network architecture and the network functional entities are described. Specific issues are further investigated. The present document also identifies possible further standardization areas.
|
102 049
|
PowerLine Telecommunications (PLT); Quality of Service (QoS) requirements for in-house systems
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102000_102099/102049/01.01.01_60/tr_102049v010101p.pdf
|
The scope of the present document is to achieve a consistent view on the quality of a service (QoS) on a PLC home network. The main focus will be on CE applications in the home, typical examples for CE-in-home applications are Voice, Audio/Video and Data services. The QoS requirements shall be described in a layered view according to the ISO-OSI model. The mapping of the QoS description across layers shall be non-ambiguous. A parameterized and prioritized QoS description shall be used as found in the literature. The user QoS requirements on the services have to be described by QoS parameters on the application layers. A non-ambiguous mapping will be defined to map the application QoS profile to a network QoS profile. Each profile is defined by a set of parameters. These parameters shall be uniquely used for traffic engineering, resource reservation and media arbitration. The restrictions of the Powerline medium shall be taken into account. An over-provisioning might not be possible due to the limited throughput of the PLC network and the broadband services used at home. The network shall be aware of network capacity bottlenecks and shall provide means to maintain the limited resources. No central server, no manual configuration or network operator support should be needed. The network shall provide a distributed auto-configuration concept and shall reconfigure itself after erroneous events.
|
102 022-1
|
<empty>
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102000_102099/10202201/01.01.01_60/tr_10202201v010101p.pdf
|
The present document provides the User Requirement Specifications for Mission Critical Broadband Communications. The present document describes the functionalities which are most needed by users and the requirements they make on the technology The present document is applicable to the specification of Mission Critical Broadband equipment. The URS will support TC TETRA to guide the introduction of broadband features.
|
102 121
|
<empty>
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/102100_102199/102121/01.02.01_60/tr_102121v010201p.pdf
|
The present document gives guidance on installation, connection and operation of power supply systems for telecommunication / datacom installations and equipments. Also are considered items of equipment with their own power supply, which are connected to form a complete system installation. The present document contains definitions for power supply and distribution systems in complement to power interfaces standards ETSI EN 300 132 series [5], [6], [26].
|
101 994-2
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics for SRD equipment using Ultra Wide Band technology (UWB); Part 2: Ground- and Wall- Probing Radar applications; System Reference Document
|
TR
|
1.1.2
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/10199402/01.01.02_60/tr_10199402v010102p.pdf
|
The present document provides information on the intended applications, the technical parameters and the radio spectrum requirements for UWB Ground- and Wall Probing Radar equipment operating in the frequency band from 30 MHz to 12,4 GHz. It describes Ground Probing (GPR) and Wall Probing (WPR) systems that are used in survey and detection applications. These applications require wide frequency bandwidths that cannot be provided by alternative technologies and/or at spot frequencies. The scope is limited to radars operated as short range devices (because of their usage and design), in which the system is in close proximity to the materials being investigated. It does not include radars operated from aircraft or spacecraft which may sometimes be referred to as GPRs but do not fall into the category of short range devices. The radar applications in the present document are not intended for communications purposes. Their intended usage excludes radiation into the free space, unlike for UWB communications equipment. Additional information is given in the following annexes: • annex A: detailed market information; • annex B: technical information; • annex C: expected compatibility issues.
|
101 994-1
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics for SRD equipment using Ultra Wide Band technology (UWB) Part 1: Communications applications
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/10199401/01.01.01_60/tr_10199401v010101p.pdf
|
The present document provides information on the intended applications, the technical parameters and the radio spectrum requirements for UWB communication equipment in the frequency range from 3,1 GHz to 10,6 GHz. Additional information is given in the following Annexes: • Annex A: Detailed market information; • Annex B: Technical information; • Annex C: Expected compatibility issues.
|
101 987
|
Terrestrial Trunked Radio (TETRA); Proposed Air Interface Enhancements for TETRA Release 2; Analysis and Feasibility Assessment
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/101987/01.01.01_60/tr_101987v010101p.pdf
|
The present document analyses and provides recommendations regarding Air Interface enhancements that have been proposed for TETRA Release 2. The target audience is EPT, and the purpose is to enable informed decisions to be made by EPT regarding prioritization and feasibility of AI enhancement standardization work, and workload division between WG2, WG3, and other WGs as applicable. The TETRA air interface has been designed to meet the special requirements of TETRA and as such it is more effective and efficient at meeting these requirements than other radio systems. However it is necessary that TETRA should continue to evolve in line with technology enhancements so that it remains a class-leading technology. There are many potential enhancements which could be added to the TETRA air interface, and it is necessary for the TETRA community to evaluate which combination of these best meets the needs of TETRA whilst not requiring excessive standardization effort. A number of proposed enhancements have been considered, resulting in this technical report. Effort has been made, during the analysis and feasibility assessment work, to consider a maximum number of proposed enhancements which have been put forth in relevant forums regarding TETRA Release 2.
|
101 985
|
Satellite Earth Stations and Systems (SES); Broadband Satellite Multimedia; IP over Satellite
|
TR
|
1.1.2
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/101985/01.01.02_60/tr_101985v010102p.pdf
|
The scope of the present document is the review of study topics with respect to the provision of IP-based services via Broadband Satellite Multimedia (BSM) networks. The present document builds on the following two earlier reports: • TR 101 374-1 [1], "Survey on Standardization Objectives for Broadband Satellite Multimedia". • TR 101 374-2 [2], "Standardization Objectives for Broadband Satellite Multimedia: The Standardization Scenario". The present document also builds on the general BSM Services and Architectures defined in: • TR 101 984 [3], "Services and Architectures". The present document discusses the standardization approach, relevant issues and provides a reference framework for further work that should be undertaken within ETSI with regard to the use of Broadcast Satellite Multimedia (BSM) networks to transport IP-structured traffic. The report is focussed on the following aspects off IP over satellite: • BSM systems based on GeoSynchronous Orbit (GSO) satellites; • integration of BSM services with IP-based services; • integration of BSM satellite networks with terrestrial networks; • integration of BSM broadcast and multicast services with IP-based services, including IP multicast services. The structure defined in the present document is intended to provide a framework for a series of detailed studies on specific issues which are expected to identify existing standards and to identify areas where new standards are required, in order to achieve these objectives. The objectives of BSM standardization are: • to enable users to access a wide range of telecommunications services, with particular emphasis on multi-media services and high data rates; • to provide an efficient means of using network resources (particularly radio spectrum); • to enable the benefits of satellite technology to be made available to a wide range of users; • to facilitate the provision of a high quality of service for transporting IP traffic over BSM networks; • to facilitate the provision of low cost terminals.
|
102 273-7
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Improvement on Radiated Methods of Measurement (using test site) and evaluation of the corresponding measurement uncertainties; Part 7: Artificial human beings
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/102200_102299/10227307/01.02.01_60/tr_10227307v010201p.pdf
|
The present document provides background to the subject of measurement uncertainty and proposes extensions and improvements relevant to radiated measurements. It also details the methods of radiated measurements (test methods for mobile radio equipment parameters and verification procedures for test sites) and additionally provides the methods for evaluating the associated measurement uncertainties. The present document provides a method to be used together with all the applicable standards and (E)TRs, supports TR 100 027 [11] and can be used with TR 100 028 [10]. The present document covers the test methods for performing radiated measurements on mobile radio equipment using Artificial Human Beings and also provides the methods for evaluation and calculation of the measurement uncertainties for each of the measured parameters.
|
101 983
|
ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Radio equipment to be used in the 76 GHz to 77 GHz band; System Reference Document for Short-Range Radar to be fitted on road infrastructure
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/101983/01.01.01_60/tr_101983v010101p.pdf
|
The present document applies to radars operating on the 76 GHz to 77 GHz band. It defines their possible use for road infrastructure. The goal of the present document is to require the modification of: - ERC/DEC/(92)02 [2] - ERC/REC 70-03 [3] In order to replace the comments relative to the 76 – 77 GHz band from "vehicular systems" or "vehicle radar systems" to " vehicle or road to vehicles systems" or any equivalent sentence. NOTE: The current version of EN 301 091 [1] already includes requirements about fixed and mobile applications and therefore already covers the infrastructure application as described in the present document.
|
101 982
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio equipment to be used in the 24 GHz band; System Reference Document for automotive collision warning Short Range Radar
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/101982/01.02.01_60/tr_101982v010201p.pdf
|
The present document applies to Short Range Devices (SRD) in the field of SRR operating at very low power levels for exterior automotive applications for vehicle environmental sensing. These applications require antenna characteristics, which necessitate narrow beam and low elevation antenna angles with a limited mounting height. The present document describes the technical characteristics of SRRs, the Radio frequency requirements as a wideband frequency range, for the carrier frequency operating in the 24 GHz SRD as specified in CEPT/ERC Recommendation 70-03 [1]. The devices also use the SRD Band for a movement sensor function implementing a Doppler mode for a target speed measurement function. The EN 301 091 [3] presents a basis for the new cost efficient and versatile 24 GHz radar technology, which complements 77 GHz Automotive Cruise Control (ACC) functions. The following information is given in: • Annex A: Detailed market information; • Annex B: Technical information; • Annex C: Expected compatibility issues.
|
101 981
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); System Reference Document for inductive Loop - Ultra Low Power Active Medical Implants (ULP- AMI) - systems operating in the frequency bands 9 kHz to 315 kHz
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/101981/01.02.01_60/tr_101981v010201p.pdf
|
The present document applies to the radio sections of inductive loop Ultra Low Power Active Medical Implants in the field of Short Range Devices (SRDs) transmitters and receiver systems operating on various frequencies within the range of 9 kHz to 315 kHz. The present document gives guidance on the definition of a transmitter mask for the operating frequencies, analyses and the spectrum requirements for transmission of power and data from/to stationary programmers or mobile neurostimulation systems (pain control) to/from active medical implants. The present document considers the ERC Report 44, [1] and contains the technical characteristics for radio equipment as given in CEPT/ERC Recommendation 70-03 [2]. Therefore, the frequency range 9 kHz to 135 kHz is already sufficiently regulated for inductive systems in CEPT/ERC Recommendation 70-03 [2]. The necessary operation for the frequency range 135 kHz to 315 kHz is not addressed in CEPT/ERC Recommendation 70-03 [2] and is addressed in the present document. The spectrum parameters for inductive loop ULP-AMI devices that are the subject of this document are intended to be included as a normative annex in the EN 300 330-2 [3] or in a new European Harmonized Standard. They are submitted for consideration to CEPT/ERC WGSE for compliance studies and in WGFM/SRD MG for inclusion in the CEPT/ERC Recommendation 70-03 [2], annex 12.
|
101 977
|
Terrestrial Trunked Radio (TETRA); Study of the suitability of the GSM Adaptive Multi-Rate (AMR) speech codec for use in TETRA
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/101977/01.01.01_60/tr_101977v010101p.pdf
|
The present document provides background information on the performance of four modes of the GSM Adaptive Multi-Rate (AMR) speech codec operating within the TETRA system. The aim of the present document is to provide information to illustrate the behaviour of the GSM AMR in different TETRA operational conditions.
|
101 975
|
Terrestrial Trunked Radio (TETRA); RF Sensitive Area Mode
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/101975/01.01.01_60/tr_101975v010101p.pdf
|
The present document defines the requirements for basic and enhanced TxI modes. The present document is applicable to the specification of TETRA terminal equipment.
|
101 973-3
|
Access and Terminals (AT); Public Switched Telephone Network; Support of legacy terminals by BroadBand IP equipment; Listing of the most relevant features and functionalities; Part 3: ISDN terminals
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/10197303/01.01.01_60/tr_10197303v010101p.pdf
|
The present document describes the functional technical characteristics supported by PSTNs across the wider European market, in order to provide guidance to developers of broadband networks and equipment (e.g. IPCablecom embedded MTA, FWA subscriber units) that support an ISDN terminal. The present document does not include any Safety or EMC aspects or requirements.
|
101 973-2
|
Access and Terminals (AT); Public Switched Telephone Network; Support of legacy terminals by BroadBand IP equipment; Listing of the most relevant features and functionalities; Part 2: Analogue PSTN terminals
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/10197302/01.01.01_60/tr_10197302v010101p.pdf
|
The present document describes the functional technical characteristics supported by PSTNs across the wider European market, in order to provide guidance to developers of broadband networks and equipment (e.g. IPCablecom MTA, FWA subscriber units) that support an analogue PSTN terminal. The present document does not include any Safety or EMC aspects or requirements.
|
101 973-1
|
Access and Terminals (AT); Public Switched Telephone Network; Support of legacy terminals by BroadBand IP equipment; Listing of the most relevant features and functionalities; Part 1: General
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/10197301/01.01.01_60/tr_10197301v010101p.pdf
|
The present document belongs to a set of documents which describes the functional technical characteristics supported by PSTNs across the wider European market, in order to provide guidance to developers of broadband equipment (e.g. IPCablecom MTA, FWA subscriber units) that support either PSTN analogue or ISDN terminal. This is part 1 referring to the common aspects of PSTN Analogue and ISDN Terminals. The present document does not include any Safety or EMC aspects or requirements.
|
101 971
|
Access and Terminals (AT); IP Cable Services for Multimedia Broadband Cable Networks; Availability and Reliability
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/101971/01.01.01_60/tr_101971v010101p.pdf
|
The present document concerns availability and reliability modeling for IP cable communication networks. Availability and reliability parameters for cable access networks are addressed in the context of end-to-end performance. The document focuses on the design considerations of IP based networks for survivability. It provides guides for operational measurement and improvement of the reliability/availability of IP based networks and services. It also discusses how to use metrics for the reliability/availability clauses of Service Level Agreements (SLAs). It applies these techniques to cable communications networks. The carrier and data network industries, both service and equipment providers, are familiar with Service Level Agreement (SLA) and Quality of Service (QoS) objectives. The present document provides common analysis that both parties will understand and can use to improve interworking and performance for all end users.
|
101 963
|
Access and Terminals (AT); Report on the Requirements of European Cable Industry for Implementation of IPCablecom Technologies; Identification of high level requirements and establishment of priorities
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/101963/01.01.01_60/tr_101963v010101p.pdf
|
The present document aims to describe the high level service features of European Cable Communications Operators and the European cable industry for time critical multimedia IP Cable Communications, to analyse these, make an assessment of their relative priorities and to collate them into a Technical Report. The present work is intended to compliment the specifications issued by Cable Labs, ITU-T and ETSI, by the addition of the specific needs of European operators. The present document defines the service features for the delivery of PSTN like telephone services. Future versions are expected to extend this set to include multimedia integrated services. While the initial service offerings in IPCablecom are anticipated to be Packet Voice and Packet Video, the long-term project vision encompasses a large family of packet-based services. The present document is intended to form the basis of further ETSI work in developing a series of Specifications TS 101 909 by the addition of European specific content to existing material from PacketCable, SCTE and ITU-T. There will be an ongoing need to track subsequent developments with a range of interested parties including European cable operators, regulators and equipment vendors, for later inclusion in new or revised clauses of this ETSI Specification. The European cable operators' needs are based on the IPCablecom Reference Architecture (see TS 101 909-2 [70], and PacketCable LCS Architecture. This report is mainly concerned with the exchange of the data and signalling information associated with voice telephony. The present document lists these features by functional area and describes them in sufficient detail to define the service operation. Features are deliberately specified without analysing their impact on the underlying transport network. The end-to-end system defined by IPCablecom and forming the basis for the present document has been designed to run seamlessly across today's standardized, HFC-based, cable communication systems using either ES 200 800 [4] or ES 201 488 [5]. Therefore, it is assumed that the mechanisms necessary to implement the functionality listed in the present document will already be available at the transport layer. The present document does not specify how any interfaces should be achieved; it is expected that these will mostly be served by existing specifications. The present document does not specify which network interfaces should be published to satisfy the requirements of the of the EC Directive 1999/5/EC (RTTE Directive). Refer to ETSI TR 101 857 [71] for guidance on the publication of network interfaces.
|
101 960
|
Access and Terminals (AT); Study on out of band spectrum requirements for analogue PSTN terminals
|
TR
|
1.2.2
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/101960/01.02.02_60/tr_101960v010202p.pdf
|
The present document describes and enumerates various requirements on metallic (horizontal) out of band spectrum for analogue terminals connected to the PSTN. An attempt to create an envelop of the various requirements is made and a limit for an out of band spectrum requirement protecting xDSL service is proposed to facilitate the standard convergence in this sector.
|
101 959
|
Access and Terminals (AT); Ringing without DC for Terminal Equipment (TE), Terminal Support Interfaces (TSI) and Local Exchange Interfaces (LEI)
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/101959/01.01.01_60/tr_101959v010101p.pdf
|
The present document studies the necessary additional requirements for analogue Terminal Equipment (TE), for the analogue Terminal Support Interface (TSI) and for the analogue Local Exchange Interface (LEI) in case of "ringing without DC".
|
101 957
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Requirements and Architectures for Interworking between HIPERLAN/2 and 3rd Generation Cellular systems
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/101957/01.01.01_60/tr_101957v010101p.pdf
|
The scope of the present document is limited to Requirements and Architectures for interworking between HIPERLAN/2 and 3G systems (and specifically to UMTS Release 3). The present document describes the requirements and architectures that are applicable to interworking between High Performance Radio Local Area Network HIPERLAN/2 and 3rd Generation Cellular Systems. The requirements in the present document address subjects such as operational requirements, user requirements, mobility, QoS mapping, subscription information, equipment identity, security and standardization requirements. The architectures address communications layer models as well as the reference models that identify interfaces and issues subject to standardization.
|
102 061
|
Satellite Earth Stations and Systems (SES); Satellite component of UMTS/IMT2000; Detailed analysis of the packet mode for the SW-CDMA (Family A)
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102000_102099/102061/01.01.01_60/tr_102061v010101p.pdf
|
The present document evaluates the possibility of using packet access mode for satellite. The objective of the present document is to design and demonstrate the realistic feasibility of the packet access mode transmission over satellite and its applications, which eventually will lead to the specifications for this type of access. Packets are relatively small units of data that can be routed through a network based on the destination address contained within each packet [7]. Breaking communication down into packets allows the same data path to be shared among many users in the network. For the mobile user, the support for packet-switching means that a persistent link is not needed. The same broadcast channel can be shared among a number of users at the same time. The user's modem recognizes the packets intended for its user. As data such as e-mail arrives, it is forwarded immediately to the user without a circuit connection having to be established. According to [8], in UMTS four different traffic classes can be defined: • conversational; • streaming; • interactive; • background classes. The last two can be considered as packet data traffic. Conversational and streaming classes are assumed to be transmitted as real-time connections over the air interface. As an example of this traffic, one can imagine a packet session during which one or several packet calls can be generated., so that the packet constitutes a bursty sequence of packets. The burstiness during the packet call is a characteristic feature of the packet transmission. For example, in a web-browsing session a packet call corresponds to the downloading of the document. After the document is entirely received by the terminal, the user takes a certain time to study the information. This interval is called "reading time". The following parameters describe the characteristics of the packet data traffic: • session arrival process; • number of packet calls per session; • reading time between packet calls; • number of packets within a packet call; • time interval between two packets inside a packet call; • packet size. The properties that are typical for non-real-time packet services from the air interface point of view are listed below: • Packet data is bursty. The required bit rate can change rapidly from zero to hundreds of kilobits per second. • Tolerates longer delay than real-time services. • Packets can be retransmitted. The methodology followed to create the present document was to include six contributions [9], [10], [11], [12], [13] and [14] from four projects: • ATB; • SATIN; • 3GNetSim; and • GAUSS. ETSI ETSI TR 102 061 V1.1.1 (2004-05) 9 A description of each project is given in clause 4, whilst the reader can find more detailed descriptions of the simulations in the annexes of the present document. In WCDMA there are three types of transport channels that can be used to transmit packet data: common, dedicated and shared. Each of the contributions will choose the physical layer that best adapts to the particular scenario of each project, and this is what is presented in the present document. Convergence between the different proposed solutions will be needed. Another issue the reader has to take into account is that each of the contributions is focused in a different layer aspects. The ATB project explains the optimum physical layer for the satellite environment in the first contribution and the multicast feasibility in the second contribution, SATIN project also explains the problematic with layers 2 and 2+ and GAUSS project describes the RLC for a particular application. The first contribution from ATB titled "SW-CDMA Packet Access" explains the "packet access" in the unicast mode (point to point), although the concept "packet access" is a more general and includes multicast and narrowcast transmissions (point to multi-point). For the scenario of these simulations it has to be noted that the GEO satellite constellation case has been considered as baseline as it is considered to represent the most challenging configuration for the analysis of the packet mode. However, results are considered applicable also to other satellite constellations. The second contribution from the ATB consortium was an investigation on the feasibility of packet access for point to multi-point communications. Specifically the submission investigates: • large block interleaving and RS coding; • medium block interleaver with CRC; • hybrid short Carousel and FEC with interleaving; and • narrowcasting. These two contributions from the ATB focus on the technical aspects of this type of access. ATB Phase I activity had the objective of investigating strategies for packet support in SW-CDMA, analysing the techniques currently proposed for supporting the packet mode of T-UMTS W-CDMA 3GPP air interface (Release 99 and the still on-going Release 5) and when necessary to adapt them taking into account the specific satellite environment. More information about this project can be found at the ESA telecommunications web page: http://www.telecom.esa.int/telecom/www/object/index.cfm?fobjectid=617 SATIN is an IST project focused on the particular implications of the IP-based packet mode on the S-UMTS design, for multicast and broadcast transmissions. The - dictated by the UMTS core network - requirements for the S-UMTS access network will be a fundamental drive for the SATIN design paving the way for full integration with the T-UMTS for efficient delivery of a series of packet based services. Efficient support of Internet-based applications to mobile/nomadic users is a key feature of the 3G Networks. In light of the shortage and the high cost of the T-UMTS spectrum, the operators are looking into the provision of integrated broadcast/multicast services through hybrid broadcast-UMTS systems. S-UMTS could play an important role in the efficient delivery of some UMTS services to which it is better suited. These services include broadcasting and multicasting applications such as audio/video, e-newspaper, live stock exchange data, etc. The project's main objectives are summarized into the following lines: • to determine the potential role of satellites in UMTS and Service Delivery; • to define potential S-UMTS architectures efficient for the support of the IP-based packet mode; • to suggest an optimized - with reference to the IP-based packet mode - layer 1 and 2 design. More information about this project can be found at its web page: http://www.ist-satin.org The contribution from GAUSS is focused on the applicability of the packet access, which synergistically integrates navigation and communications, for providing enhanced location-based services (highly reliable, near real-time two-way communication between Mobile Users and Service Centre/Provider). ETSI ETSI TR 102 061 V1.1.1 (2004-05) 10 The main concept which the GAUSS project is based on, envisages the communication and navigation system components fitting within the general framework of S-UMTS and GALILEO (GNSS-2, Global Navigation Satellite System - Phase 2). The technological issues of such a concept relies on the development of a Demonstrator, which integrates existing and available facilities with ad-hoc designed components. The former ones constitute the ground segment, the latter ones include the advanced user terminal and the innovative services and applications. GAUSS system is capable to provide location-based services, for safety-of-life applications in the transport sector (emergency assistance, fleet and freight transport management on road and inland waterway, intermodality, dangerous goods transportation and containers tracking). These services are characterized by exchange of small data packets, from mobile users towards a service provider and vice versa, carrying precise position data and application relevant information. Furthermore, the GAUSS provided services are characterized by high quality performances as required by safety location-based applications, in terms of navigation (accurate positioning and integrity information) and communication (high reliability, availability, guaranteed time response and coverage, multicasting and broadcasting communication supported). More information about this project can be found at its web page: http://galileo.cs.telespazio.it/gauss/ Clause 4.3 contains a description of the ESA Project "3GnetSim". Due to the time schedule of this project and the aim to finalize the present document by December 2003, the clause contains no quantitative results of simulation runs, which would allow to draw conclusions about the concepts being pursued within the project. It is therefore recommended to reopen the document in order to include these results, which are expected to be available by April 2004. More information about this project can be found at its web page: http://telecom.esa.int/telecom/www/object/index.cfm?fobjectid=11675
|
101 954
|
Access and Terminals (AT); A study on POTS requirements applicable to ADSL modems when connected to an analogue presented PSTN line
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/101954/01.01.01_60/tr_101954v010101p.pdf
|
The present document studies the requirements normally applying to analogue presented PSTN terminal equipment to ensure correct interworking with PSTN network interfaces that would also apply to ADSL modems when connected to the PSTN using microfilters or ADSL splitters without a DC blocking function. The present document considers that the ADSL modem may be connected with up to 4 PSTN terminals.
|
101 953-2-3
|
<empty>
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/1019530203/01.01.01_60/tr_1019530203v010101p.pdf
|
The present document describes test methods for VDSL/ISDN splitters. These splitters are intended to be installed at the Local Exchange side of the local loop and at the user side near the NTP. In the case of splitters at the user side, the present document describes testing methods for the master splitter that is intended for use at the demarcation point of the customer premises. NOTE 1: At some locations in the present document impedances values are listed. These values might differ from the values listed in the requirement specifications TS 101 952-2-3 [1]. If the values differ the values of TS 101 952-2-3 [1] have to be used. NOTE 2: At some locations in the present document measurements are only shown for splitters at the user side. E.g. this is the case in figure 5. When measuring a splitter at the Local Exchange side the position of the Feeding bridge and the Holding Circuit have to be exchanged.
|
101 953-2-2
|
<empty>
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/1019530202/01.01.01_60/tr_1019530202v010101p.pdf
|
The present document describes test methods for the high pass section of VDSL/POTS splitters. These splitters are intended to be installed at the Local Exchange side of the local loop and at the user side near the NTP. In the case of splitters at the user side, the present document describes test methods for the master splitter that is intended for use at the demarcation point of the customer premises. Distributed filters are outside the scope of the present document. NOTE 1: At some locations in the present document impedances values are listed. These values might differ from the values listed in the requirement specifications TS 101 952-2-2 [2]. If the values differ the values of TS 101 952-2-2 [2] have to be used. NOTE 2: At some locations in the present document measurements are only shown for splitters at the user side. E.g. this is the case in figure 3. When measuring a splitter at the Local Exchange side the position of the Feeding bridge and the Holding Circuit have to be exchanged. NOTE 3: Remark, that in the present state of TS 101 270 [1] the use of distributed filters is not applicable for VDSL-over-POTS.
|
102 216
|
Smart Cards; Vocabulary for Secure Element Technologies specifications
|
TR
|
5.1.0
|
http://www.etsi.org/deliver/etsi_tr/102200_102299/102216/05.01.00_60/tr_102216v050100p.pdf
|
The purpose of the present document is to identify specialist technical terms used within the Secure Element Technologies (SET) project for the purposes of writing technical documents. The motivations for this are: • to ensure that editors use terminology that is consistent across specifications; • to provide a reader with convenient reference for technical terms that are used across multiple documents; • to prevent inconsistent use of terminology across documents. The present document is a collection of terms, definitions, abbreviations and acronyms related to the baseline documents defining SET objectives and systems framework. The present document provides a tool for further work on SET technical documentation and facilitates their understanding. The terms, definitions and abbreviations as given in the present document are either imported from existing documentation (SET, 3GPP, ETSI, ISO/IEC or elsewhere) or newly created by smart card experts whenever the need for precise vocabulary was identified. The following types of terms and acronyms are not included in the present document: • terms and acronyms generally used in computer science, information technology and cryptography; • terms and acronyms from specific application domains such as mobile telephony and banking; • terms and acronyms defined and used solely within a specific SET specification to facilitate readability. But such terms and acronyms may be included if they are frequently used in the SET specifications and a common, precise definition of the term or acronym would aid the interpretation and implementation of the specifications.
|
102 021-4
|
<empty>
|
TR
|
1.4.1
|
http://www.etsi.org/deliver/etsi_tr/102000_102099/10202104/01.04.01_60/tr_10202104v010401p.pdf
|
The present document provides the User Requirement Specifications (URS) for the TETRA air interface enhancements translated into terms of: • network performance aspects; • terminal performance aspects; • location information aspects. The present document is applicable to the specification of TETRA Release 2.1 equipment. The user requirements contained in the present document are described in non-technical terms and are based on discussions in TC TETRA WG1 and on an analysis of the results for air interface enhancements from the 2001 TETRA Release 2 Market Questionnaire and the 2007 Future of TETRA workshop [i.1].
|
102 273-5
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Improvement on Radiated Methods of Measurement (using test site) and evaluation of the corresponding measurement uncertainties; Part 5: Striplines
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/102200_102299/10227305/01.02.01_60/tr_10227305v010201p.pdf
|
The present document provides background to the subject of measurement uncertainty and proposes extensions and improvements relevant to radiated measurements. It also details the methods of radiated measurements (test methods for mobile radio equipment parameters and verification procedures for test sites) and additionally provides the methods for evaluating the associated measurement uncertainties. The present document provides a method to be used together with all the applicable standards and (E)TRs, supports TR 100 027 [8] and can be used with TR 100 028 [7]. The present document covers the test methods for performing radiated measurements on mobile radio equipment in a Stripline test facility and also provides the methods for evaluation and calculation of the measurement uncertainties for each of the measured parameters.
|
102 179
|
Digital Enhanced Cordless Telecommunications (DECT); AT command interface; High-level description
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102100_102199/102179/01.01.01_60/tr_102179v010101p.pdf
|
The present document specifies a profile of AT commands and recommends that this profile be used for controlling PT and FT functions.
|
102 198
|
Services and Protocols for Advanced Networks (SPAN); Preliminary analysis of migration to the Internet NGN
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102100_102199/102198/01.01.01_60/tr_102198v010101p.pdf
|
The present document is an analysis of technical requirements for the support and deployment of Telecommunication Services in Europe using IPv6, to progress toward the enhancement of signalling transport protocol standards. The aims are to evaluate the requirements for standardization, existing standards, and to identify standardization gaps with respect to recommendations made by the Communication "Next Generation Internet priorities for action in migrating to the new Internet Protocol Ipv6" [COM(2002) 96 final] (reference [COM 96]).
|
101 956
|
Satellite Earth Stations and Systems (SES); Technical analysis of Spread Spectrum Solutions for Telemetry Command and Ranging (TCR) of Geostationary Communications Satellites
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/101956/01.01.01_60/tr_101956v010101p.pdf
|
The present document describes the technical analysis made on new TCR standard definition in the frame of ETSI/ECSS standardization work, according to operators' needs. Operators' needs are summarized in annex B. The new standard definition is mainly based on Direct Sequence Spread Spectrum techniques (DS/SS).
|
102 024-7
|
<empty>
|
TR
|
4.1.1
|
http://www.etsi.org/deliver/etsi_tr/102000_102099/10202407/04.01.01_60/tr_10202407v040101p.pdf
|
The present document provides a collection of informative background information and guidance to supplement parts 1 to part 6 of TS 102 024. The issues covered concern the practical design phases for both equipment and networks with respect to speech performance, and therefore is relevant to TIPHON equipment manufacturers, service providers and network designers.
|
102 001
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Systems reference document for TETRA Advanced Packet Service (TAPS)
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102000_102099/102001/01.01.01_60/tr_102001v010101p.pdf
|
The present document defines the requirements for radio frequency usage for TETRA Advanced Packet Service (TAPS). It includes necessary information to support the co-operation between ETSI and the Electronic Communications Committee (ECC) of the European Conference of Post and Telecommunications Administrations (CEPT), including: • detailed market information (annex A); • technical information (annex B); • expected compatibility issues (annex C).
|
101 953-2-1
|
Access network xDSL transmission filters; Part 2: VDSL splitters for European deployment; Sub-part 1: Specification of Testing methods for low pass part of VDSL/POTS splitters
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/1019530201/01.01.01_60/tr_1019530201v010101p.pdf
|
The present document describes test methods for the low pass section of VDSL/POTS splitters. These splitters are intended to be installed at the Local Exchange side of the local loop and at the user side near the NTP. In the case of splitters at the user side, the present document describes test methods for the master splitter that is intended for use at the demarcation point of the customer premises. Distributed filters are not concerned by the present document.
|
102 055
|
<empty>
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102000_102099/102055/01.01.01_60/tr_102055v010101p.pdf
|
The present document identifies a range of issues which occur if providers of communication services and networks (called Communication Service Providers (CSP) within the present document) consider using the concepts developed in RFC 3761 [16] (ENUM) for infrastructure purposes. Such an approach would result in the application of the ENUM concept to the provision of information for routeing (both internally and for the interconnection of networks - also called peering), including information for number portability, freephone and other number or address translation capabilities, SMS and MMS, etc. It considers the likely steps along the way and where possible, identifies alternative options and approaches. It will specifically identify: • Issues which occur if providers of IMS-based NGNs consider peering traffic with each other via Points-of-Interconnect based on IP technology, by using E.164 numbers to address end-points they are hosting for their subscribers. • Issues which occur if providers of IMS-based NGNs consider peering traffic with other providers e.g. IMS-based PLMNs and also with providers on the Internet. Out-of-scope are requirements for using Infrastructure ENUM for peering of transit traffic not targeted for end-points within the providers control.
|
101 895
|
Services and Protocols for Advanced Networks (SPAN); Message Waiting Indication (MWI) ; Service Aspects
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/101895/01.01.01_60/tr_101895v010101p.pdf
|
The present document defines the stage one of the Message Waiting Indication (MWI) supplementary service for the pan-European network as provided by European telecommunications operators. Stage one is an overall service description from the user's point of view (see ITU-T Recommendation I.130 [1]), but does not deal with the details of the human interface itself. The present document provided hereafter takes into account ETS 300 650 [2] for an ISDN MWI service and it provides a wider scope of the service description. It shall be noted that ETS 300 650 [2]: • covers only ISDN situations; • includes both the receiving user's and the controlling user's perspective instead of concentrating on the service as seen by the receiving user; • is a restricted view on the facilities that need to be offered commercially (e.g. multiple Mailbox providers); • includes some constraints. NOTE 1: In case of conflict between the present document and ETS 300 650 [2], it is assumed that ETS 300 650 [2] will take precedence. NOTE 2: The detailed specifications of the procedures used by the controlling user to activate and deactivate the MWI supplementary service are outside the scope of the present document. It can be based on ISDN procedures (an example is given in ETS 300 650 [2]) or on other type of operations on other user-network interfaces (e.g. leased lines etc...). NOTE 3: It is worth noting that the network capabilities supporting the MWI supplementary service can be used for other purposes e.g. notification of events other than related to Voice Mail e.g. E-mail... NOTE 4: The definition of the Man Machine Interface (e.g. light, display, ..) on the terminal equipment is outside the scope of the present document.
|
101 891
|
Digital Video Broadcasting (DVB); Professional Interfaces: Guidelines for the implementation and usage of the DVB Asynchronous Serial Interface (ASI)
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/101891/01.01.01_60/tr_101891v010101p.pdf
|
The present document addresses interoperability issues specific to ASI data transmission links, and explicitly is not concerned with general MPEG-2 interoperability issues. An example of an ASI interoperability problem is where equipment receiving an ASI data stream occasionally drops out of lock, or never achieves lock at all. An example of a problem not addressed by these guidelines is where the video and audio on the output of a decoder have poor clock stability, because of PCR clock recovery problems at some point in the end-to-end equipment chain, for example resulting in LF wander in a regenerated PAL/NTSC subcarrier. The present document contains a clause providing a description of the design issues confronting ASI equipment designers. The present document also contains a recommendation clause, which provides simple measures to improve interoperability between ASI equipment. There may be situations where systems will work outside these recommendations, depending on precise system and equipment implementation.
|
101 913
|
Interoperation of PISNs with IP networks
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/101913/01.01.01_60/tr_101913v010101p.pdf
|
The present document is to investigate the interoperability of Private Integrated Services Networks (PISNs) and Internet Protocol (IP) networks, with a view to identifying possible scenarios for interoperation, problems that will have to be solved if particular scenarios are to be pursued further, and possible future standardization activities in this area. In particular, the following aspects of interoperability are investigated: - the interworking of PISNs and IP networks via a gateway; - the connection of PISN components via IP networks. For each of the above, aspects considered include architecture, addressing (including use of IP addressing), services, protocols, security, quality of service and mobility. This is conducted within the context of leading standards for voice and multimedia communication over IP networks, including ITU-T Recommendation H.323 [24], IETF Session Initiation Protocol (SIP) and ITU-T Recommendation H.248 [21]. Possible future standardization activities resulting from the present document can include work items relating to IP networks and work items relating to PISNs, as well as work items concerned specifically with interoperability. The dominant traffic in PISNs is voice, and therefore the present document focuses on interoperability considerations for voice traffic. However, many of the standards that support voice in an IP network are also applicable to multi-media traffic (e.g., voice, video and data). Although in many respects similar to voice, fax traffic has slightly different requirements and is not explicitly considered in the present document. It could be the subject of further study.
|
102 008
|
Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON) Release 3; Terms and Definitions
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102000_102099/102008/01.01.01_60/tr_102008v010101p.pdf
|
The present document specifies the definition the definition of terms to be adopted for all deliverables contained in TIPHON Release 3.
|
102 003
|
Broadband Radio Access Networks (BRAN); HIPERACCESS; System Overview
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102000_102099/102003/01.01.01_60/tr_102003v010101p.pdf
|
The present document has been produced to assist the following potential readers to understand the aims and principal features required of the HIPERACCESS standards: • Regulatory bodies responsible for spectrum allocation and licensing of systems. • Members of other BRAN groups. • Members of other ETSI projects and bodies. • Potential manufacturers of HIPERACCESS systems. • Potential operators of HIPERACCESS systems. • Developers of the detailed HIPERACCESS standards. The present document addresses particularly the following issues: • A summary of what HIPERACCESS will deliver for users. • A comparison with other technologies and context with other BRAN solutions. • The scope of standardization proposed (including interfaces to be standardized). • A view of the expected licensing regime and an estimation of the required spectrum. The present document describes the HIPERACCESS systems and is intended to serve as a basis for development of HIPERACCESS technical specifications.
|
101 882
|
Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON) Release 5; Protocol Framework Definition and Interface Requirement Definition; General
|
TR
|
5.1.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/101882/05.01.01_60/tr_101882v050101p.pdf
|
The present document specifies behavioural models in UML for each of the service capabilities defined in TR 101 878 [1]. The requirements expressed in the present document applies to all TIPHON compliant products.
|
101 878
|
<empty>
|
TR
|
5.1.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/101878/05.01.01_60/tr_101878v050101p.pdf
|
The present document, specifies the requirements for the range of service capabilities necessary to implement the services identified in TR 101 301 [1]. Service capabilities are invoked either singly or in combination by independent applications to construct recognized or novel communication services. The requirements expressed in the present document apply to all TIPHON-compliant products and are realized in the service capability meta-protocols specified in TS 101 882 [2].
|
101 877
|
Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON); Requirements Definition Study; Scope and Requirements for a Simple call
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/101877/01.01.01_60/tr_101877v010101p.pdf
|
The present document defines the TIPHON framework that enables services to be developed which are able to inter-work across multiple communication network domains and diverse network technologies. The framework identifies services, service capabilities and service applications and defines the relationships between them. The present document: • considers how Service Capabilities can be combined to develop Service Applications; • defines the requirements for a Simple Call Service Application. The content of the present document does not infer any details of the implementation of any of the concepts expressed within it.
|
101 941
|
Access and Terminals (AT); Study of the implications of standardization of IP terminals utilizing Ethernet, PSTN and ISDN connection methods
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/101941/01.01.01_60/tr_101941v010101p.pdf
|
The present document studies the implications of standardization of IP Terminals utilizing Ethernet, PSTN and ISDN connection methods.
|
102 044
|
Electronic Signatures and Infrastructures (ESI); Requirements for role and attribute certificates
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102000_102099/102044/01.01.01_60/tr_102044v010101p.pdf
|
The present document identifies a set of requirements that will provide a basis for a subsequent standard, which will then build policy requirements for attributes certified by Attribute Authorities or Certification Authorities complying with [4] and related standards. In some electronic signature applications, roles and attributes can be exerted only if a claimer's right to use them is certified by one competent authority which is trusted by the signed document users. The scope of the present document is to investigate on the attribute certification related topics in order to cover the general use of certified attributes in the context of electronic signatures. Attributes that can be used in such a context can also be used for other reasons, e.g. for authorization.
|
102 031-3
|
Fixed Radio Systems; Point-to-point and point-to-multipoint equipment; Use of circular polarization in multipoint systems; Part 3: Antennas for multipoint fixed radio systems in the 1 GHz to 11 GHz band
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/102000_102099/10203103/01.01.01_60/tr_10203103v010101p.pdf
|
The present document specifies the essential electrical requirements for circular polarization fixed beam antennas to be utilized with MultiPoint (MP) systems, including central station, repeater stations, and terminal station applications, operating in frequency bands from 1 GHz to 11 GHz. These systems use various multiple access schemes. Electronically steerable antennas, and linearly polarized antennas are not considered under the present document. Where circumstances merit, and after a consultation period with operators and manufacturers, the Regulatory Authority may impose the use of tighter requirements than the minimum values given in the present document, in order to maximize the use of scarce spectrum resources.
|
101 886
|
Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON); Requirements Definition Study; Real time aspects of a resolution service
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/101886/01.01.01_60/tr_101886v010101p.pdf
|
The present document describes the requirements and definitions for the administrative and real-time aspects of the TIPHON Resolution Capability (TRC). TIPHON Resolution Capability (TRC) is a centralized resolution mechanism for inter-service provider call routing in TIPHON compliant networks. In terms of the general framework given in TR 101 326, the TRC is an objective service resolution. Its main function is to map an E.164 number to a unique service provider name called a Home Network Name (HNN). The administrative part deals with the required processes and procedures for administering E.164 numbers and service provider data, while the real-time part allows the originating service provider to query the database to determine the HNN of the home service provider serving the E.164 number. It should be noted that although the TRC was originally developed to support an International UPT service, the concepts and technology infrastructure are equally applicable to other TIPHON applications, including national variants. The present document provides the basis for the Resolution Service capability in TS 101 878. At the same time, the present document can also be used as a stand-alone document.
|
101 939
|
Fixed Radio Systems; Multipoint-to-Multipoint systems; Requirements for broadband multipoint-to-multipoint radio systems operating in the 24,25 GHz to 29,5 GHz band and in the available bands within the 31,0 GHz to 33,4 GHz frequency range
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/101939/01.01.01_60/tr_101939v010101p.pdf
|
The present document provides the results of studies into deployment of Multipoint-to-Multipoint systems. A range of issues has been considered, including co-existence with Point-to-Multipoint systems, capacity, spectral efficiency and coverage. Draft requirements for systems operating in various frequency bands have been considered and are referred to in the appendices.
|
101 949
|
Speech Processing, Transmission and Quality Aspects (STQ); QoS parameter definitions and measurements for use in network-to-network narrowband interconnection
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/101949/01.01.01_60/tr_101949v010101p.pdf
|
The present document contains harmonized definitions and measurement methods for a range of Quality of Service (QoS) parameters that relate to public network-public network interconnection. The purpose of these parameters is to define objective and comparable measures of the QoS for interconnection. Measurement of these parameters will show how well interconnection is working at an operational level. The present document is intended to provide a menu from which individual items can be selected. Although the present document aims to include all the most relevant parameters, there is no obligation to use any or all of the parameters, the choice of what is used is entirely a matter for the interested parties. The aim of the present document is to provide a common starting point for QoS issues and thereby to assist the preparation of contracts and publications of comparative performance. It is not the intention to cause documents that already have adequate definitions of parameters to be revised. The establishment of target values for each parameter is outside the scope of the present document. The present documenting arrangements, including which party is responsible for reporting, are outside the scope of the present document. The Quality of Service parameters apply only to the interconnection of digital circuit switched connections provided over SDH or PDH transmission technologies. The present document may be revised or extended to cover packet based technologies at a future date. The Quality of Service parameters apply for any services provided over digital circuit switched connections, including: • Fixed to fixed • Fixed to mobile • Mobile to fixed • Mobile to mobile • All forms of services with special user tariff arrangements such as freephone, shared cost and premium rate
|
101 854
|
Fixed Radio Systems; Point-to-point equipment; Derivation of receiver interference parameters useful for planning fixed service point-to-point systems operating different equipment classes and/or capacities
|
TR
|
2.1.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/101854/02.01.01_60/tr_101854v020101p.pdf
|
The present document gives, initially, a basic overview of how a fixed point-to-point system is allocated an EIRP guaranteeing predetermined link availability. It then reviews the methodology for deriving the parameters necessary for the sharing of FS systems in an environment with different equipment classes and capacity. The methodology is based on the limitation of noise and is not exclusive. In addition a method for calculation of RSL based on normalized values is presented. The present document highlights the primary parameters from European standards, which are vital to the development of an assignment system. These parameters are: • Transmitter radiation patterns. • Receiver sensitivity. • Receiver adjacent channel rejection. • Receiver co-channel rejection. In addition to these parameters the antenna radiation profile and, if fitted, the ATPC operating characteristics will have a major effect on link density.
|
101 854
|
Fixed Radio Systems; Point-to-point equipment; Derivation of receiver interference parameters useful for planning fixed service point-to-point systems operating different equipment classes and/or capacities
|
TR
|
1.3.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/101854/01.03.01_60/tr_101854v010301p.pdf
|
The present document gives, initially, a basic overview of how a fixed point-to-point system is allocated an EIRP guaranteeing predetermined link availability. It then reviews the methodology for deriving the parameters necessary for the sharing of FS systems in an environment with different equipment classes and capacity. The methodology is based on the limitation of noise and is not exclusive. In addition a method for calculation of RSL based on normalized values is presented. The present document highlights the primary parameters from European standards, which are vital to the development of an assignment system. These parameters are: • Transmitter radiation patterns. • Receiver sensitivity. • Receiver adjacent channel rejection. • Receiver co-channel rejection. In addition to these parameters the antenna radiation profile and, if fitted, the ATPC operating characteristics will have a major effect on link density.
|
101 953-1-2
|
Access network xDSL transmission filters; Part 1: ADSL splitters for European deployment; Sub-part 2: Testing methods for High Pass part of ADSL/POTS splitters.
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/1019530102/01.01.01_60/tr_1019530102v010101p.pdf
|
The present document describes test methods for the high pass section of ADSL/POTS splitters. These splitters are intended to be installed at the Local Exchange side of the local loop and at the user side near the NTP. In the case of splitters at the user side, the present document describes testing methods for the master splitter that is intended for use at the demarcation point of the customer premises. Distributed filters are not concerned by the present document.
|
101 857
|
Access and Terminals (AT); Broadband access to the Public Telecommunications Network; Publication of interface specification under Directive 1999/5/EC, art. 4.2; Guidelines for describing Multimedia Cable Network Interfaces
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/101857/01.01.01_60/tr_101857v010101p.pdf
|
The purpose of the present document is to assist the Public Network Operators and Public Service Providers sharing the Telecommunications physical support with Broadcast systems based on cable technologies in producing publications that describe their public interfaces in accordance with article 4.2 of the Radio Equipment and Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC [1]. The present document lists in special the characteristics of a broadband cable multimedia interface to the Public Telecommunications Network which could be necessary for a description of that interface but does not give guidance on the style of presentation of interface publications. The present document makes also reference to the most relevant ETSI deliverables in the case where the network interface offered uses other technologies. The present document is applicable to interface specifications for new, modified and existing interfaces. The present document does not specify how any proprietary interfaces details, which are not already in the public domain, are published. The present document does not specify which interfaces should be published, neither does it address the timing of publication, as these functions are clearly the responsibility of the National Regulatory Authorities. The process of publication is not covered in the present document.
|
101 953-1-3
|
Access network xDSL transmission filters; Part 1: ADSL splitters for European deployment; Sub-part 3: Testing methods for ADSL/ISDN splitters
|
TR
|
1.1.2
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/1019530103/01.01.02_60/tr_1019530103v010102p.pdf
|
The present document describes test methods for ADSL/ISDN splitters. These splitters are intended to be installed at the Local Exchange side of the local loop and at the user side near the NTP. In the case of splitters at the user side, the present document describes testing methods for the master splitter that is intended for use at the demarcation point of the customer premises.
|
101 984
|
Satellite Earth Stations and Systems (SES); Broadband Satellite Multimedia (BSM); Services and architectures
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/101984/01.02.01_60/tr_101984v010201p.pdf
|
The present document defines the BSM services and architectures. It contains a set of definitions and reference models in the following main areas: • BSM roles and actors; • BSM reference architectures and models; • BSM bearer services. The present document is intended to define the possible roles that Broadband Satellite Multimedia systems may have, to define the main actors, to define a set of reference architectures and to define the services they can provide. These definitions are intended as a common set of definitions for BSM standardization. The overall objectives of BSM standardization are: • to enable users to access a wide range of telecommunications services, including many that are today undefined, with particular emphasis on IP-based multi-media services and high data rates; • to provide an efficient means of using satellite network resources (particularly radio spectrum); • to facilitate the provision of a high quality of service similar to that provided by fixed networks; • to facilitate the provision of easy to use, low cost terminals.
|
101 938
|
Fixed Radio Systems; Electronically steerable antennas; Multipoint (MP) antennas; Fixed Wireless Access (FWA) radio systems
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/101938/01.02.01_60/tr_101938v010201p.pdf
|
The present document identifies the issues of electronically steerable antennas. An electronically steerable antenna is used in Point-to-Multipoint (P-MP) or Multipoint-to-Multipoint (MP-MP) systems to cover different directions with narrow beams and high gain.
|
102 021-9
|
<empty>
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/102000_102099/10202109/01.02.01_60/tr_10202109v010201p.pdf
|
The present document provides the User Requirement Specifications (URS) for the enhancements of the TETRA Peripheral Equipment Interface. The existing TETRA PEI standard has been available since 1998. The TETRA Release 2 standard, incorporating the high-speed data capability (TEDS) has been published. This HSD capability increases the maximum data rate of the TETRA systems from 28,8 kbit/s to over 500 kbit/s, radically changing the range of data applications available to TETRA users. The TETRA users could, from now on, use a range of multimedia applications (with video as a medium) via TEDS channels. One bottleneck to making full use of this new capability is the restrictions imposed by interfacing TETRA Release 2 systems via mobile stations only. Hence, a standard HSD PEI with a concurrent multimedia capability is essential to enable access to the system from a range of data terminals (such as laptops, etc.). Peripheral Equipment Interface enhancements translated into terms of: • PEI physical layer aspects. • Multimedia capability. • QoS negotiation. The present document is applicable to the specification of TETRA Release 2 equipment. The user requirements contained in the present document are described mainly in non-technical terms and are based on discussions in TC TETRA WG1.
|
101 873-3
|
Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 3: TTCN-3 Graphical presentation Format (GFT)
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/10187303/01.02.01_60/tr_10187303v010201p.pdf
|
The present document defines the Message Sequence Chart (MSC) presentation format for the TTCN-3 core language as defined in ES 201 873-1 [1]. This presentation format uses a subset of Message Sequence Charts as defined in [3] with test specific extensions and extensions of general nature. The present document is based on the core TTCN-3 language defined in ES 201 873-1 [1]. It is particularly suited to display tests as GFTs. It is not limited to any particular kind of test specification. The specification of other formats is outside the scope of the present document.
|
101 874
|
Methods for Testing and Specification (MTS); The Tree and Tabular Combined Notation version 3; TTCN-3: TTCN-2 to TTCN-3 Mapping
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/101874/01.01.01_60/tr_101874v010101p.pdf
|
The present document gives guidance on how to map TTCN-2 [2] to TTCN-3 [1]. It is intended for TTCN-3 tool implementers as well as TTCN-3 users. While every effort has been taken to provide as comprehensive guidelines as possible the present document does not necessarily cover every detail of translating between the two languages.
|
101 953-1-1
|
Access and Terminals (AT); Unified and Generic Testing Methods for European Specific DSL splitters; Part 1: ADSL splitters for European deployment; Sub-part 1: Specification of Testing methods for Low Pass part of ADSL/POTS splitters
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/1019530101/01.01.01_60/tr_1019530101v010101p.pdf
|
The present document describes test methods for the low pass section of POTS/ADSL splitters. These splitters are intended to be installed at the Local Exchange side of the local loop and at the user side near the NTP. In the case of splitters at the user side, the present document describes test methods for the master splitter that is intended for use at the demarcation point of the customer premises. Distributed filters are not concerned by the present document.
|
101 844
|
Access and Terminals (AT); Study of the global usage and acceptance of non-radio TBRs and associated documents
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/101844/01.01.01_60/tr_101844v010101p.pdf
|
The present document: • performs a study of the global usage and acceptance of non-radio TBRs and related documents, • identifies the implications of any change to the existing TBRs or related documents; • gives guidance on future handling of the content of these documents. NOTE: Annex A lists documents within the scope of the present document
|
101 858
|
Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON); Number portability and its implications for TIPHON networks
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/101858/01.01.01_60/tr_101858v010101p.pdf
|
The present document gives an introduction to number portability and an overview of the current way in which number portability is being implemented in various countries. The objective of the present document is to inform the designers of Tiphon equipment and the implementers of Tiphon networks about: - the various requirements that they may have to comply with in different countries; - the implications for equipment and network design. The present document concentrates on the actual implementations which have been developed rather than the descriptions given in other standardization documents because: - the standardization work has been too late to influence many implementations; - the objective is to help Tiphon networks fit into existing situations. The present document focuses on the technical implementations. National strategies, responsibilities and charging are covered only to the extent necessary to outline the context for the technical solutions. The present document gives most emphasis to number portability of national numbers in fixed networks; as such, portability of numbers for Global Services and for European Telephony Numbering Space (ETNS) numbers is not considered. The present document is complementary to other deliverables on number portability produced by ETSI.
|
101 856
|
Broadband Radio Access Networks (BRAN); Functional Requirements for Fixed Wireless Access systems below 11 GHz: HIPERMAN
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/101856/01.01.01_60/tr_101856v010101p.pdf
|
The present document outlines and defines the functional requirements for an interoperable broadband fixed wireless access system operating at radio frequencies between 2 GHz and 11 GHz. The air interface will be optimized for PMP configurations, but may allow for flexible mesh deployments. It aims to establish whether there is a need for a separate BRAN standard for such systems or whether the existing or proposed HIPERACCESS and/or HIPERLAN2 standards adequately address this sector. It provides requirements for modifications to existing standard(s) or development of an appropriate new standard serving access networks with frequencies below 11 GHz. For the purposes of the present document, a "system" constitutes the PHY and DLC layers, which are core network independent, and the core network specific Convergence sublayer. It should be noted that to specify a complete system, other specifications, e.g. for the Network layer and higher layers are required. These specifications are assumed to be available or to be developed by other bodies. The implementation includes at least one subscriber unit that communicates with a base station via an interoperable radio air interface, the interfaces to external networks, and services transported by the DLC and PHY protocol layers. So, "functional requirements" describes the properties of typical systems in terms of how they affect requirements of the interoperable standard. The functional requirements describe the system and requirements in broad terms: what they are, but not how they work. The "how part" (i.e. the implementation) would be left to any forthcoming interoperability standard.
|
101 866
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Analysis and definition of the Packet Mode
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/101866/01.01.01_60/tr_101866v010101p.pdf
|
The present document summarizes the packet mode operation defined within 3GPP's Release 1999 of the terrestrial UMTS UTRAN FDD-mode at air interface level (layers 1 and 2). Additionally, it also describes some of the enhancements in Releases 4 and 5 of 3GPP in order to provide a high-speed Downlink Access. The present document analyses the impact on the satellite component of UMTS/IMT2000 and defines solutions adapted to the satellite component.
|
101 835
|
Telecommunications and Internet Protocol Harmonization over Networks (TIPHON); Project method definition
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/101835/01.01.01_60/tr_101835v010101p.pdf
|
The present document defines the specification development process to be used to ensure the TIPHON project develops coherent specifications in a timely manner. The present document is applicable to members of the TIPHON project, working group chairs, work item rapporteurs and the TIPHON Project Management Committee. It should be referenced when planning work to be undertaken by the project.
|
101 771
|
Telecommunications and Internet protocol Harmonization Over Networks (TIPHON) Release 4; Service Independent requirements definition; Threat Analysis
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101700_101799/101771/01.01.01_60/tr_101771v010101p.pdf
|
The present document provides a comprehensive analysis of security threats to the TIPHON environment as described in principle in TS 101 313 [9]. It includes a definition of the security objectives, a description of the assets within the TIPHON environment, a list of threats to the TIPHON environment, a risk assessment, and a recommendation of the necessary security countermeasures. TIPHON compliant systems bring together IP-based and SCN-based communications. Therefore it is recommended to comply with a certain level of security. Because of the well-known threats and counter-measures in the SCN, the present document focuses primarily on the IP-internal, IP-to-SCN functions. The following network elements form the simplified TIPHON architecture as described in principle in TS 101 313 [9] for ITU-T Recommendation H.323 [12] to SCN interworking, which is used as basis for the present document: • Terminals; • Call control element, e.g. Gatekeeper; • Admission control element, e.g. User Profile; • Decomposed Inter-technology gateway consisting of: - Media Gateway Controller; - Media Gateway; - Signalling Gateway. Where appropriate the guidelines for conduct of a threat analysis described in ETR 332 [1] are followed. It is intended to expand the present document to cover additional functions and services in a future edition to cover the extended TIPHON environment described by TS 101 314 ed1 (for TIPHON release 2), for TS 101 314 ed2 (TIPHON release 3) and also in TS 101 882 [17] (TIPHON release 3) as an examination of threats against meta-protocols.
|
101 768
|
Public Switched Telephone Network (PSTN); Study on the generation of analogue ringing signals
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101700_101799/101768/01.01.01_60/tr_101768v010101p.pdf
|
The present document gives guidance on the different aspects of analogue ringing signals. The present document aims at listing the different parameters that must be taken into account when drafting specifications or other documentation on which analogue ringing signals have an impact or influence. The present document is also intended for use by terminal and network equipment designers. The present document is applicable to analogue ringing signals generated by subscriber line interface circuits (or other types of ringing generators) of exchanges, access networks, PABXs etc. be it for the public or private domain. The present document describes the electrical characteristics of analogue ringing signals.
|
101 853
|
Fixed Radio Systems; Point-to-point and point-to-multipoint equipment; Rules for the co-existence of point-to-point and point-to-multipoint systems using different access methods in the same frequency band
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/101853/01.01.01_60/tr_101853v010101p.pdf
|
The present document gives guidance on the compatibility of Point-to-Multipoint digital radio fixed service systems intended to operate in the same frequency band and in near or identical geographical location, using different access methods and characteristics. Furthermore, it outlines the strategy for compatibility between fixed service P-MP systems operation and P-P systems. The present document defines the methodologies to be used for evaluating the interference between two P-MP systems and between a P-MP system and a P-P radio link. It should be noted that for the evaluation of the degree of co-existence some assumptions shall be taken and some parameters shall be defined. The document produces a series of considerations regarding the identification of some critical parameters, the constraints which they should satisfy and some mitigation methods that could be applied for a better co-existence.
|
101 870
|
Fixed radio transmitter sites; Exposure to non-ionising electromagnetic fields; Guidelines for working conditions
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/101870/01.01.01_60/tr_101870v010101p.pdf
|
The present document gives guidance for workers at fixed radio transmitter sites where the electromagnetic fields in the frequency range from 9 kHz up to 300 GHz may exceed the levels defined for the general public either in the ICNIRP guidelines [1] or in the guidelines laid down by European or National Authorities. The present document is not applicable where the exposure levels outside the equipment enclosures are less than the levels in the Relevant Recommendations. Transmitter sites used exclusively by radio amateurs are not covered by the present document.
|
101 837
|
ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Study on 27 MHz CB radio compatibility with analogue television broadcast receiver installations
|
TR
|
1.1.2
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/101837/01.01.02_60/tr_101837v010102p.pdf
|
The present document presents the study on CB 27 MHz radio compatibility with analogue television broadcast receiver installations. In order to avoid the near field measurement at 27 MHz using reference antennas intended for 50 MHz and more (because the radiated field measurements below 30 MHz are not normally specified) an appropriate 27 MHz dipole antenna has been calibrated to use when necessary. The study has been carried taking into consideration the field strength level of 125 dBµV/m as the general limit of immunity to ambient electromagnetic fields at the antennas of TV and FM radio reception installations (CISPR 20 [2], clause 4.1.1). The present document has two main parts: The study of different each elements of a TV-FM broadcasting installation (clause 5) and the behaviour of the TV installation as a whole (clause 6) when it is illuminated by an electromagnetic field of 27 MHz from a neighbouring site.
|
101 904
|
Transmission and Multiplexing (TM); Time Division Duplex (TDD) in Point-to-Multipoint (P-MP) Fixed Wireless Access (FWA) systems; Characteristics and network applications
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101900_101999/101904/01.01.01_60/tr_101904v010101p.pdf
|
The present document discusses the issues on the application of Time Division Duplex (TDD) in the Fixed Service bands for Fixed Wireless Access (FWA) Point-to-Multipoint (P-MP) applications. It examines the advantages and disadvantages of applying TDD techniques to such systems, and it discusses the differences between traditional Frequency Division Duplex (FDD) methods and TDD methods as far as these impact the P-MP standards produced by ETSI WG-TM4. It reviews some of the related work being undertaken by other ETSI bodies and by CEPT in particular, that concerning the deployment of TDD systems in the same Fixed Service bands as FDD systems are deployed. It gives guidance on any additional parameters definitions, precautions or other changes required to TM4 P-MP standards that might be necessary to clarify the use of TDD techniques. The terms of reference for the study were: Taking due consideration of the ongoing studies in WG-TM4 (namely, TM-04069), ERC/WGSE and ERM, in particular of compatibility issues between FDD and TDD systems deployed in the same geographical area using the same frequency band allocated by the CEPT for P-MP fixed systems, produce a Technical Report which: - describes and gives background on the selection, modification or addition of technical parameters relevant to the usage of TDD arrangements in FWA applications; - is intended to provide the preliminary draft of generic wording for ENs for P-MP systems using TDD. Close liaison with WGSE (PT SE-19), TC-ERM (WG ERM/RM) and EP DECT is required.
|
101 740
|
Security algorithms Group of Experts (SAGE); Rules of the management of the standard GSM GPRS Encryption Algorithm 2 (GEA2)
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101700_101799/101740/01.01.01_60/tr_101740v010101p.pdf
|
The purpose of the present document is to specify the rules for the management of the Standard GSM GPRS Encryption Algorithm 2 (GEA2). The management structure is defined in clause 4. This structure is defined in terms of the principals involved in the management of the GEA2 (ETSI, ETSI SMG, GEA2 Custodian and Approved Recipients) together with the relationships and interactions between them. The procedures for delivering the GEA2 to Approved Recipients are defined in clause 5. This clause is supplemented by Annex A which specifies the items which are to be delivered. Clause 6 is concerned with the criteria for approving an organization for receipt of the GEA2 and with the responsibilities of an Approved Recipient. This clause is supplemented by Annex B which contains a Confidentiality and Restricted Usage Undertaking to be signed by each Approved Recipient. Clause 7 is concerned with the appointment and responsibilities of the GEA2 Custodian. The specification of the GEA2 consists of the following three documents: 1) Specification of the GPRS Encryption Algorithm 2 (GEA2) Document 1: Algorithm Specification. 2) Specification of the GPRS Encryption Algorithm 2 (GEA2) Document 2: Design Conformance Test Data. 3) Specification of the GPRS Encryption Algorithm 2 (GEA2) Document 3: Algorithm Input/Output Test Data. The rules for management as described in the present document apply for Document 1 and Document 2 only. Document 3 will be a publicly available document and its distribution will not be subject to any rules.
|
101 734
|
Internet Protocol (IP) based networks; Parameters and mechanisms for charging
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101700_101799/101734/01.01.01_60/tr_101734v010101p.pdf
|
The present document gives guidance in selecting charging parameters and the appropriate charging mechanisms in the IP (Internet Protocol) based networks of the future. In the today's Internet there is no detailed collection of charges implemented. Users are charged by the Internet Service Provider (ISP) either: • a flat rate; • a time dependent rate; or • a volume class dependent rate. In addition the telecommunication service to access the ISP is charged by the Telecommunication Network Operator. Such charging schemes will persist but with the emergence of the Internet - especially with the evolution towards commercial operation - the need arises to collect charging information for diverse services. These charges may be composed of various parameters and components according to the service split among several operators. The present document concentrates on such cases only where parameters are collected. Therefore, the present document describes a first set of parameters relevant for charging and the mechanisms needed for collection of charging information in IP based networks. The general principles for charging are listed which apply to IP based networks. These parameters are applicable to all types of IP based services. Nevertheless an appropriate set of parameters can be selected for each type. Collection of charging information will be done both by network operators and service providers for the usage of resources. The present document describes parameters and mechanisms from a technical point of view. Therefore, the term "operator" is used throughout the present document where it is applicable to service providers, to network operators, or to both service providers and network operators. Accounting, tariffing and billing of IP based services are outside the scope of the present document. Nevertheless these issues are also of great interest for IP based networks and services. Accounting (or settlement) is currently discussed in ITU-T Study Group 3 and for the Internet Telephony Service in ETSI Project TIPHON.
|
101 731
|
Access and Terminals (AT); Digital access to the public telecommunications network; Publication of interface specification under Directive 1999/5/EC;
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101700_101799/101731/01.01.01_60/tr_101731v010101p.pdf
|
The present document assists the public network operators and public service providers in producing publications that describe their public interfaces in accordance with article 4.2 of Directive 1999/5/EC [1]. The present document lists the characteristics of a non-radio digital interface to the public telecommunications network which could be necessary for a description of that interface but does not give guidance on the style of presentation of interface publications. Indirect access to services and networks are also covered in the present document. The process of publication is not covered in the present document. This document is applicable to interface specifications for new, modified and existing interfaces.
|
101 790
|
Digital Video Broadcasting (DVB); Interaction channel for Satellite Distribution Systems; Guidelines for the use of EN 301 790
|
TR
|
1.4.1
|
http://www.etsi.org/deliver/etsi_tr/101700_101799/101790/01.04.01_60/tr_101790v010401p.pdf
|
The present document should be read in conjunction with the normative document [i.2] in order to assist network operators, systems integrators, and equipment manufacturers in the realization of satellite based interactive services. The present document should be interpreted as recommendations or good practices but not as mandatory requirements. It is anticipated however that future procurement documents may reference elements of the present document as part of their system specification. The present document is applicable to satellite systems as defined in [i.2]. In such a system the RCSTs receive a Forward Link signal based on the DVB-S [i.1] or DVB-S2 [i.38] specifications. In a non-regenerative system, the Return Link signal transmitted from the RCST is received by one or more Gateways, which also interact with the NCC. In regenerative systems as well as in transparent mesh systems, it can be possible to also have direct RCST-to-RCST communications. The system as defined in [i.2] may be used in all frequency bands allocated to FSS or BSS services, and the first expected implementations are in the bands listed in annex E. Information concerning the most relevant international regulations and recommendations (ITU, ETSI, DVB, etc.) which could be applicable to the DVB-RCS terminals is included in clause 2. The present document, as well as the normative document [i.2], cover two RCST profiles: • Type A, which is able to support IP services only. This type of terminal supports two types of data encapsulation, based on ATM or MPEG2. • Type B, which is able to operate as RCST Type A and also to support native ATM protocols by encapsulating ATM cells within an MPEG2 Transport Stream on the forward link. The present document should not be used to justify the fulfilment of the essential requirements under article 3.2 of the R&TTE Directive [i.33]. Requirements for ElectroMagnetic Compatibility (EMC) under article 3.1b of the R&TTE Directive [i.33] are given in EN 300 673 [i.30] or EN 301 489-12 [i.31]. Harmful interference is limited by requiring a minimum set of Control and Monitoring Functions (CMF) as well as specifying limits for on-axis radiation, off-axis spurious radiation, carrier suppression, off-axis EIRP emission density and pointing accuracy. These specifications are in general depending on the transmit frequency. For system transmitting at Ku band frequencies EN 301 428 [i.9] applies. Limits for Ka band systems are given in EN 301 459 [i.8]. Within the constraints of the above clause, there are a number of parameters that need to be declared by manufacturers and network operators for interoperability, including: • All parameters defined in the CSC burst. • Frequency plan, including frequency bands, of forward and return links. • Range of symbol rate on forward and return link. Transmit and receive RF characteristics of the RCST, including at least: EIRP capability, frequency hopping capability, uplink power control capability, isolation between Tx and Rx and G/T.
|
101 728
|
Access and Terminals (AT); Study for the specification of low pass filter section of POTS/ADSL splitters
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/101700_101799/101728/01.02.01_60/tr_101728v010201p.pdf
|
The present document provides the basis for specification of requirements and test methods for the low pass section of POTS/ADSL splitters. These splitters are intended to be installed at the Local Exchange side of the local loop and at the user side near the NTP. The splitter at the user side may be part of the network or part of the user installation but will be always used to connect an access network using ADSL technology as described in ETR 328 [1] with a typical home installation. The present document does not cover the possible advantages and disadvantages of the ownership of the splitter e.g. by the network operator, the user or a third party. The present document covers most common situations to ensure a reasonable performance of this technology and facilitate the launch of such systems. The high pass filter function of the splitter is not within the scope of the present document.
|
101 714
|
Digital cellular telecommunications system (Phase 2+) (GSM); Performance Characterization of the GSM Adaptive Multi-Rate (AMR) speech codec (GSM 06.75 version 7.2.0 Release 1998)
|
TR
|
7.2.0
|
http://www.etsi.org/deliver/etsi_tr/101700_101799/101714/07.02.00_60/tr_101714v070200p.pdf
|
The present document provides background information on the performances of the GSM Adaptive Multi-Rate (AMR) speech codec. Experimental test results from the Verification and Characterisation phases of testing are reported to illustrate the behaviour of the GSM AMR in multiple operational conditions.
|
101 830-2
|
Transmission and Multiplexing (TM); Access networks; Spectral management on metallic access networks; Part 2: Technical methods for performance evaluations
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/10183002/01.02.01_60/tr_10183002v010201p.pdf
|
The present document gives guidance on a common methodology for studying the impact of noise on xDSL performance (maximum reach, noise margin, maximum bitrate) when changing parameters within various Spectral Management scenarios. These methods enable reproducible results and a consistent presentation of the assumed conditions (characteristics of cables and xDSL equipment) and configuration (chosen technology mixture and cable fill) of each scenario. The technical methods include computer models for estimating: • xDSL receiver capability of detecting signals under noisy conditions; • xDSL transmitter characteristics; • cable characteristics; • crosstalk cumulation in cables, originating from a mix of xDSL disturbers. The objective is to provide the technical means for evaluating the performance of xDSL equipment within a chosen scenario. This includes the description of performance properties of equipment. Another objective is to assist the reader with applying this methodology by providing examples on how to specify the configuration and the conditions of a scenario in an unambiguous way. The distinction is that a configuration of a scenario can be controlled by access rules while the conditions of a scenario cannot. Possible applications of the present document include: • Studying access rules, for the purpose of bounding the crosstalk in unbundled networks. • Studying deployment rules, for the various systems present in the access network. • Studying the impact of crosstalk on various technologies within different scenarios. The scope of the present document is explicitly restricted to the methodology for defining scenarios and quantifying the performance of equipment within such a scenario. All judgement on what access rules are required, what performance is acceptable, or what combinations are spectral compatible, is explicitly beyond the scope of the present document. The same applies for how realistic the example scenarios are. The models in the present document are not intended to set requirements for DSL equipment. These requirements are contained in the relevant transceiver specifications. The models in the present document are intended to provide a reasonable estimate of real-world performance but may not include every aspect of modem behaviour in real networks. Therefore real-world performance may not accurately match performance numbers calculated with these models.
|
101 767
|
Human Factors (HF); Symbols to identify telecommunications facilities for deaf and hard of hearing people; Development and evaluation
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101700_101799/101767/01.01.01_60/tr_101767v010101p.pdf
|
The present document reports the background research, symbols development and evaluation undertaken to create a European Standard on symbols to identify telecommunications facilities for the deaf and hard of hearing. The symbols defined in the final standard will be applicable to all telecommunications equipment that provide the defined facilities and assistive technologies that are intended to support the deaf and hard of hearing".
|
101 800
|
Acoustic safety of Terminal Equipment (TE); An investigation on standards and approval documents
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/101800/01.01.01_60/tr_101800v010101p.pdf
|
The present document establishes the results of an investigation into existing standards and approval documents dealing with acoustic safety (including acoustic shock) requirements for telecommunications terminal equipment, together with other relevant background information. The present document has been produced in order to assist ETSI TC STQ in considering further work to support a possible harmonized standard on acoustic safety pursuant to the requirements of Art. 3.1(a) of Directive 1999/5/EC [11] (the R&TTE Directive).
|
101 802
|
Speech Processing, Transmission and Quality Aspects (STQ); The Concept of Relative Levels
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/101802/01.01.01_60/tr_101802v010101p.pdf
|
The present document gives guidance on "good engineering practice" with respect to relative levels.
|
101 803-10
|
<empty>
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/10180310/01.01.01_60/tr_10180310v010101p.pdf
|
The present document is a technical report keeping the state of the early development done on the transport of IP over DTM. It gives insight into how things can be done, but is not complete enough to become a standard, so the status is reported so that further work can make use of this knowledge. The present document describes how IP traffic can be carried over a DTM network. Specifically, the mapping between IP and DTM is described and the system environment in which it operates. It further describes two services to carry IP traffic over a DTM, topology based forwarding and flow based forwarding. The first service is based on hop-by-hop IP forwarding where the DTM transport is used as a flexible transport technology. The connectivity between the IP/DTM interworking functions is established (where IP routing functions are connected to DTM networks) by network management. This achieves an IP network overlaid on the DTM infrastructure. The IP overlay network is semi permanent as is usually the case for transport networks. For this service, the present document covers the adaptation of the IP traffic on to the connections and mechanisms for establishing the connections. User IP traffic will then be routed over the overlay IP network by the IP routers. In the second service, the IP/DTM interworking function sets up a specific connection to other IP/DTM interworking functions "on-demand" across a DTM network to provide a dedicated connection for streaming IP traffic across the DTM network. These are referred to as dynamic channels. This service provides the capability to ensure, for example, traffic isolation, low latency and low packet loss for a specific IP flow. The standard describes the adaptation of IP traffic on to the channels, channel setup and connection modification. The present document currently only defines the mechanisms for setting up channels with one sender and one receiver.
|
101 730
|
Publication of interface specification under R&TTE directive 1999/5/EC; Guidelines for describing analogue interfaces
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101700_101799/101730/01.01.01_60/tr_101730v010101p.pdf
|
The purpose of the present document is to assist the public network operators and public service providers in producing interface publications according to Article 4.2 of Directive 1999/5/EC [1]. The present document lists the parameters of the analogue interface to the public telecommunications network which could be necessary for a description of that interface.The present document does not give guidance on the presentation format of interface publications to be made by PNOs The interface types dealt with are as follows: • Analogue Access to PSTN. • Analogue leased lines, 2 wire and 4 wire. Indirect access to services and networks are also covered in the present document. The timing and other administrative issues of publications are not covered in the present document.
|
101 778
|
Methods for Testing and Specification (MTS); Technical quality of telecommunications standards; Complementary methods and technical quality manual
|
TR
|
1.1.2
|
http://www.etsi.org/deliver/etsi_tr/101700_101799/101778/01.01.02_60/tr_101778v010102p.pdf
|
The present document is the outcome of continuing studies in TC MTS aimed at improving the technical quality of standards (and other types of deliverable) drafted in ETSI Technical Bodies. It contains a description of a set of macros operating under the ETSI-approved word processor Microsoft Word 7™contained in Office 95™. These macros are designed to: - combine advice with a tool that automated routine tasks for rapporteurs’ and so made their work easier and more interesting; - provide automated tools that help to improve the consistency of documents and provide a different perspective that enables errors to be noticed more easily; - provide a solution that is used on screen in association with the draft deliverable rather than advice that is in separate reports and so remains unread. Tutorial advice conforms to the ETSI Drafting Rules [1]. The whole output of the STF is contained in this template. The present document is adds no additional information to that contained in the template.
|
101 698
|
Number Portability Task Force (NPTF); Administrative support of service provider portability for geographic and non-geographic numbers
|
TR
|
1.1.1
|
http://www.etsi.org/deliver/etsi_tr/101600_101699/101698/01.01.01_60/tr_101698v010101p.pdf
|
The present document considers the inter-operator/service provider processes required to support Number Portability, in particular, the information transfer requirements. Processes include: - service establishment (including initial contact, planning, implementation & testing); - impact upon number administration; - customer porting (including requests, validation, scheduling, contingency planning, porting); - subsequent portability, cessation; - service maintenance (including network changes, introduction of new number ranges); - fault handling; - ancillary system processes (which may include billing, directory enquiries, emergency; - services, numbering plan administration and law enforcement agencies). The subsequent amendment to a porting order, or postponement to a porting order is outside the scope of the present document.
|
101 865
|
Satellite Earth Stations and Systems (SES); Satellite component of UMTS/IMT-2000; General aspects and principles
|
TR
|
1.2.1
|
http://www.etsi.org/deliver/etsi_tr/101800_101899/101865/01.02.01_60/tr_101865v010201p.pdf
|
The present document describes the general aspects and principles that apply to satellite systems intended to be an integral part of the Universal Mobile Telecommunications System (UMTS)/IMT-2000. The S-UMTS systems considered in the present document are expected to provide a comprehensive range of satellite services, mainly derived from the terrestrial UMTS network, to a range of mobile terminals including pocket phones, PDA types, car mounted plug-in and nomadic terminals. Also the use of intermediate module repeaters (IMR) to improve coverage is highlighted. Evaluating the implication on the IP level completes the document. The ETSI TC-SES S-UMTS Working Group provides a forum to develop voluntary S-UMTS/IMT-2000 specifications.
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.