text
stringlengths 1.03k
957k
|
---|
//-----------------------------------------------
// This is the simplest form of inferring the
// simple/SRL(16/32)CE in a Xilinx FPGA.
//-----------------------------------------------
`timescale 1ns / 100ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_b2s_simple_fifo #
(
parameter C_WIDTH = 8,
parameter C_AWIDTH = 4,
parameter C_DEPTH = 16
)
(
input wire clk, // Main System Clock (Sync FIFO)
input wire rst, // FIFO Counter Reset (Clk
input wire wr_en, // FIFO Write Enable (Clk)
input wire rd_en, // FIFO Read Enable (Clk)
input wire [C_WIDTH-1:0] din, // FIFO Data Input (Clk)
output wire [C_WIDTH-1:0] dout, // FIFO Data Output (Clk)
output wire a_full,
output wire full, // FIFO FULL Status (Clk)
output wire a_empty,
output wire empty // FIFO EMPTY Status (Clk)
);
///////////////////////////////////////
// FIFO Local Parameters
///////////////////////////////////////
localparam [C_AWIDTH-1:0] C_EMPTY = ~(0);
localparam [C_AWIDTH-1:0] C_EMPTY_PRE = (0);
localparam [C_AWIDTH-1:0] C_FULL = C_EMPTY-1;
localparam [C_AWIDTH-1:0] C_FULL_PRE = (C_DEPTH < 8) ? C_FULL-1 : C_FULL-(C_DEPTH/8);
///////////////////////////////////////
// FIFO Internal Signals
///////////////////////////////////////
reg [C_WIDTH-1:0] memory [C_DEPTH-1:0];
reg [C_AWIDTH-1:0] cnt_read;
// synthesis attribute MAX_FANOUT of cnt_read is 10;
///////////////////////////////////////
// Main simple FIFO Array
///////////////////////////////////////
always @(posedge clk) begin : BLKSRL
integer i;
if (wr_en) begin
for (i = 0; i < C_DEPTH-1; i = i + 1) begin
memory[i+1] <= memory[i];
end
memory[0] <= din;
end
end
///////////////////////////////////////
// Read Index Counter
// Up/Down Counter
// *** Notice that there is no ***
// *** OVERRUN protection. ***
///////////////////////////////////////
always @(posedge clk) begin
if (rst) cnt_read <= C_EMPTY;
else if ( wr_en & !rd_en) cnt_read <= cnt_read + 1'b1;
else if (!wr_en & rd_en) cnt_read <= cnt_read - 1'b1;
end
///////////////////////////////////////
// Status Flags / Outputs
// These could be registered, but would
// increase logic in order to pre-decode
// FULL/EMPTY status.
///////////////////////////////////////
assign full = (cnt_read == C_FULL);
assign empty = (cnt_read == C_EMPTY);
assign a_full = ((cnt_read >= C_FULL_PRE) && (cnt_read != C_EMPTY));
assign a_empty = (cnt_read == C_EMPTY_PRE);
assign dout = (C_DEPTH == 1) ? memory[0] : memory[cnt_read];
endmodule // axi_protocol_converter_v2_1_b2s_simple_fifo
`default_nettype wire
|
//-----------------------------------------------
// This is the simplest form of inferring the
// simple/SRL(16/32)CE in a Xilinx FPGA.
//-----------------------------------------------
`timescale 1ns / 100ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_b2s_simple_fifo #
(
parameter C_WIDTH = 8,
parameter C_AWIDTH = 4,
parameter C_DEPTH = 16
)
(
input wire clk, // Main System Clock (Sync FIFO)
input wire rst, // FIFO Counter Reset (Clk
input wire wr_en, // FIFO Write Enable (Clk)
input wire rd_en, // FIFO Read Enable (Clk)
input wire [C_WIDTH-1:0] din, // FIFO Data Input (Clk)
output wire [C_WIDTH-1:0] dout, // FIFO Data Output (Clk)
output wire a_full,
output wire full, // FIFO FULL Status (Clk)
output wire a_empty,
output wire empty // FIFO EMPTY Status (Clk)
);
///////////////////////////////////////
// FIFO Local Parameters
///////////////////////////////////////
localparam [C_AWIDTH-1:0] C_EMPTY = ~(0);
localparam [C_AWIDTH-1:0] C_EMPTY_PRE = (0);
localparam [C_AWIDTH-1:0] C_FULL = C_EMPTY-1;
localparam [C_AWIDTH-1:0] C_FULL_PRE = (C_DEPTH < 8) ? C_FULL-1 : C_FULL-(C_DEPTH/8);
///////////////////////////////////////
// FIFO Internal Signals
///////////////////////////////////////
reg [C_WIDTH-1:0] memory [C_DEPTH-1:0];
reg [C_AWIDTH-1:0] cnt_read;
// synthesis attribute MAX_FANOUT of cnt_read is 10;
///////////////////////////////////////
// Main simple FIFO Array
///////////////////////////////////////
always @(posedge clk) begin : BLKSRL
integer i;
if (wr_en) begin
for (i = 0; i < C_DEPTH-1; i = i + 1) begin
memory[i+1] <= memory[i];
end
memory[0] <= din;
end
end
///////////////////////////////////////
// Read Index Counter
// Up/Down Counter
// *** Notice that there is no ***
// *** OVERRUN protection. ***
///////////////////////////////////////
always @(posedge clk) begin
if (rst) cnt_read <= C_EMPTY;
else if ( wr_en & !rd_en) cnt_read <= cnt_read + 1'b1;
else if (!wr_en & rd_en) cnt_read <= cnt_read - 1'b1;
end
///////////////////////////////////////
// Status Flags / Outputs
// These could be registered, but would
// increase logic in order to pre-decode
// FULL/EMPTY status.
///////////////////////////////////////
assign full = (cnt_read == C_FULL);
assign empty = (cnt_read == C_EMPTY);
assign a_full = ((cnt_read >= C_FULL_PRE) && (cnt_read != C_EMPTY));
assign a_empty = (cnt_read == C_EMPTY_PRE);
assign dout = (C_DEPTH == 1) ? memory[0] : memory[cnt_read];
endmodule // axi_protocol_converter_v2_1_b2s_simple_fifo
`default_nettype wire
|
//-----------------------------------------------
// This is the simplest form of inferring the
// simple/SRL(16/32)CE in a Xilinx FPGA.
//-----------------------------------------------
`timescale 1ns / 100ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_b2s_simple_fifo #
(
parameter C_WIDTH = 8,
parameter C_AWIDTH = 4,
parameter C_DEPTH = 16
)
(
input wire clk, // Main System Clock (Sync FIFO)
input wire rst, // FIFO Counter Reset (Clk
input wire wr_en, // FIFO Write Enable (Clk)
input wire rd_en, // FIFO Read Enable (Clk)
input wire [C_WIDTH-1:0] din, // FIFO Data Input (Clk)
output wire [C_WIDTH-1:0] dout, // FIFO Data Output (Clk)
output wire a_full,
output wire full, // FIFO FULL Status (Clk)
output wire a_empty,
output wire empty // FIFO EMPTY Status (Clk)
);
///////////////////////////////////////
// FIFO Local Parameters
///////////////////////////////////////
localparam [C_AWIDTH-1:0] C_EMPTY = ~(0);
localparam [C_AWIDTH-1:0] C_EMPTY_PRE = (0);
localparam [C_AWIDTH-1:0] C_FULL = C_EMPTY-1;
localparam [C_AWIDTH-1:0] C_FULL_PRE = (C_DEPTH < 8) ? C_FULL-1 : C_FULL-(C_DEPTH/8);
///////////////////////////////////////
// FIFO Internal Signals
///////////////////////////////////////
reg [C_WIDTH-1:0] memory [C_DEPTH-1:0];
reg [C_AWIDTH-1:0] cnt_read;
// synthesis attribute MAX_FANOUT of cnt_read is 10;
///////////////////////////////////////
// Main simple FIFO Array
///////////////////////////////////////
always @(posedge clk) begin : BLKSRL
integer i;
if (wr_en) begin
for (i = 0; i < C_DEPTH-1; i = i + 1) begin
memory[i+1] <= memory[i];
end
memory[0] <= din;
end
end
///////////////////////////////////////
// Read Index Counter
// Up/Down Counter
// *** Notice that there is no ***
// *** OVERRUN protection. ***
///////////////////////////////////////
always @(posedge clk) begin
if (rst) cnt_read <= C_EMPTY;
else if ( wr_en & !rd_en) cnt_read <= cnt_read + 1'b1;
else if (!wr_en & rd_en) cnt_read <= cnt_read - 1'b1;
end
///////////////////////////////////////
// Status Flags / Outputs
// These could be registered, but would
// increase logic in order to pre-decode
// FULL/EMPTY status.
///////////////////////////////////////
assign full = (cnt_read == C_FULL);
assign empty = (cnt_read == C_EMPTY);
assign a_full = ((cnt_read >= C_FULL_PRE) && (cnt_read != C_EMPTY));
assign a_empty = (cnt_read == C_EMPTY_PRE);
assign dout = (C_DEPTH == 1) ? memory[0] : memory[cnt_read];
endmodule // axi_protocol_converter_v2_1_b2s_simple_fifo
`default_nettype wire
|
//-----------------------------------------------
// This is the simplest form of inferring the
// simple/SRL(16/32)CE in a Xilinx FPGA.
//-----------------------------------------------
`timescale 1ns / 100ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_b2s_simple_fifo #
(
parameter C_WIDTH = 8,
parameter C_AWIDTH = 4,
parameter C_DEPTH = 16
)
(
input wire clk, // Main System Clock (Sync FIFO)
input wire rst, // FIFO Counter Reset (Clk
input wire wr_en, // FIFO Write Enable (Clk)
input wire rd_en, // FIFO Read Enable (Clk)
input wire [C_WIDTH-1:0] din, // FIFO Data Input (Clk)
output wire [C_WIDTH-1:0] dout, // FIFO Data Output (Clk)
output wire a_full,
output wire full, // FIFO FULL Status (Clk)
output wire a_empty,
output wire empty // FIFO EMPTY Status (Clk)
);
///////////////////////////////////////
// FIFO Local Parameters
///////////////////////////////////////
localparam [C_AWIDTH-1:0] C_EMPTY = ~(0);
localparam [C_AWIDTH-1:0] C_EMPTY_PRE = (0);
localparam [C_AWIDTH-1:0] C_FULL = C_EMPTY-1;
localparam [C_AWIDTH-1:0] C_FULL_PRE = (C_DEPTH < 8) ? C_FULL-1 : C_FULL-(C_DEPTH/8);
///////////////////////////////////////
// FIFO Internal Signals
///////////////////////////////////////
reg [C_WIDTH-1:0] memory [C_DEPTH-1:0];
reg [C_AWIDTH-1:0] cnt_read;
// synthesis attribute MAX_FANOUT of cnt_read is 10;
///////////////////////////////////////
// Main simple FIFO Array
///////////////////////////////////////
always @(posedge clk) begin : BLKSRL
integer i;
if (wr_en) begin
for (i = 0; i < C_DEPTH-1; i = i + 1) begin
memory[i+1] <= memory[i];
end
memory[0] <= din;
end
end
///////////////////////////////////////
// Read Index Counter
// Up/Down Counter
// *** Notice that there is no ***
// *** OVERRUN protection. ***
///////////////////////////////////////
always @(posedge clk) begin
if (rst) cnt_read <= C_EMPTY;
else if ( wr_en & !rd_en) cnt_read <= cnt_read + 1'b1;
else if (!wr_en & rd_en) cnt_read <= cnt_read - 1'b1;
end
///////////////////////////////////////
// Status Flags / Outputs
// These could be registered, but would
// increase logic in order to pre-decode
// FULL/EMPTY status.
///////////////////////////////////////
assign full = (cnt_read == C_FULL);
assign empty = (cnt_read == C_EMPTY);
assign a_full = ((cnt_read >= C_FULL_PRE) && (cnt_read != C_EMPTY));
assign a_empty = (cnt_read == C_EMPTY_PRE);
assign dout = (C_DEPTH == 1) ? memory[0] : memory[cnt_read];
endmodule // axi_protocol_converter_v2_1_b2s_simple_fifo
`default_nettype wire
|
/*
*
* Copyright (c) 2011 fpgaminer@bitcoin-mining.com
*
*
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
`timescale 1ns/1ps
// A quick define to help index 32-bit words inside a larger register.
`define IDX(x) (((x)+1)*(32)-1):((x)*(32))
// Perform a SHA-256 transformation on the given 512-bit data, and 256-bit
// initial state,
// Outputs one 256-bit hash every LOOP cycle(s).
//
// The LOOP parameter determines both the size and speed of this module.
// A value of 1 implies a fully unrolled SHA-256 calculation spanning 64 round
// modules and calculating a full SHA-256 hash every clock cycle. A value of
// 2 implies a half-unrolled loop, with 32 round modules and calculating
// a full hash in 2 clock cycles. And so forth.
module sha256_transform #(
parameter LOOP = 7'd64 // For ltcminer
) (
input clk,
input feedback,
input [5:0] cnt,
input [255:0] rx_state,
input [511:0] rx_input,
output reg [255:0] tx_hash
);
// Constants defined by the SHA-2 standard.
localparam Ks = {
32'h428a2f98, 32'h71374491, 32'hb5c0fbcf, 32'he9b5dba5,
32'h3956c25b, 32'h59f111f1, 32'h923f82a4, 32'hab1c5ed5,
32'hd807aa98, 32'h12835b01, 32'h243185be, 32'h550c7dc3,
32'h72be5d74, 32'h80deb1fe, 32'h9bdc06a7, 32'hc19bf174,
32'he49b69c1, 32'hefbe4786, 32'h0fc19dc6, 32'h240ca1cc,
32'h2de92c6f, 32'h4a7484aa, 32'h5cb0a9dc, 32'h76f988da,
32'h983e5152, 32'ha831c66d, 32'hb00327c8, 32'hbf597fc7,
32'hc6e00bf3, 32'hd5a79147, 32'h06ca6351, 32'h14292967,
32'h27b70a85, 32'h2e1b2138, 32'h4d2c6dfc, 32'h53380d13,
32'h650a7354, 32'h766a0abb, 32'h81c2c92e, 32'h92722c85,
32'ha2bfe8a1, 32'ha81a664b, 32'hc24b8b70, 32'hc76c51a3,
32'hd192e819, 32'hd6990624, 32'hf40e3585, 32'h106aa070,
32'h19a4c116, 32'h1e376c08, 32'h2748774c, 32'h34b0bcb5,
32'h391c0cb3, 32'h4ed8aa4a, 32'h5b9cca4f, 32'h682e6ff3,
32'h748f82ee, 32'h78a5636f, 32'h84c87814, 32'h8cc70208,
32'h90befffa, 32'ha4506ceb, 32'hbef9a3f7, 32'hc67178f2};
genvar i;
generate
for (i = 0; i < 64/LOOP; i = i + 1) begin : HASHERS
// These are declared as registers in sha256_digester
wire [511:0] W; // reg tx_w
wire [255:0] state; // reg tx_state
if(i == 0)
sha256_digester U (
.clk(clk),
.k(Ks[32*(63-cnt) +: 32]),
.rx_w(feedback ? W : rx_input),
.rx_state(feedback ? state : rx_state),
.tx_w(W),
.tx_state(state)
);
else
sha256_digester U (
.clk(clk),
.k(Ks[32*(63-LOOP*i-cnt) +: 32]),
.rx_w(feedback ? W : HASHERS[i-1].W),
.rx_state(feedback ? state : HASHERS[i-1].state),
.tx_w(W),
.tx_state(state)
);
end
endgenerate
always @ (posedge clk)
begin
if (!feedback)
begin
tx_hash[`IDX(0)] <= rx_state[`IDX(0)] + HASHERS[64/LOOP-6'd1].state[`IDX(0)];
tx_hash[`IDX(1)] <= rx_state[`IDX(1)] + HASHERS[64/LOOP-6'd1].state[`IDX(1)];
tx_hash[`IDX(2)] <= rx_state[`IDX(2)] + HASHERS[64/LOOP-6'd1].state[`IDX(2)];
tx_hash[`IDX(3)] <= rx_state[`IDX(3)] + HASHERS[64/LOOP-6'd1].state[`IDX(3)];
tx_hash[`IDX(4)] <= rx_state[`IDX(4)] + HASHERS[64/LOOP-6'd1].state[`IDX(4)];
tx_hash[`IDX(5)] <= rx_state[`IDX(5)] + HASHERS[64/LOOP-6'd1].state[`IDX(5)];
tx_hash[`IDX(6)] <= rx_state[`IDX(6)] + HASHERS[64/LOOP-6'd1].state[`IDX(6)];
tx_hash[`IDX(7)] <= rx_state[`IDX(7)] + HASHERS[64/LOOP-6'd1].state[`IDX(7)];
end
end
endmodule
module sha256_digester (clk, k, rx_w, rx_state, tx_w, tx_state);
input clk;
input [31:0] k;
input [511:0] rx_w;
input [255:0] rx_state;
output reg [511:0] tx_w;
output reg [255:0] tx_state;
wire [31:0] e0_w, e1_w, ch_w, maj_w, s0_w, s1_w;
e0 e0_blk (rx_state[`IDX(0)], e0_w);
e1 e1_blk (rx_state[`IDX(4)], e1_w);
ch ch_blk (rx_state[`IDX(4)], rx_state[`IDX(5)], rx_state[`IDX(6)], ch_w);
maj maj_blk (rx_state[`IDX(0)], rx_state[`IDX(1)], rx_state[`IDX(2)], maj_w);
s0 s0_blk (rx_w[63:32], s0_w);
s1 s1_blk (rx_w[479:448], s1_w);
wire [31:0] t1 = rx_state[`IDX(7)] + e1_w + ch_w + rx_w[31:0] + k;
wire [31:0] t2 = e0_w + maj_w;
wire [31:0] new_w = s1_w + rx_w[319:288] + s0_w + rx_w[31:0];
always @ (posedge clk)
begin
tx_w[511:480] <= new_w;
tx_w[479:0] <= rx_w[511:32];
tx_state[`IDX(7)] <= rx_state[`IDX(6)];
tx_state[`IDX(6)] <= rx_state[`IDX(5)];
tx_state[`IDX(5)] <= rx_state[`IDX(4)];
tx_state[`IDX(4)] <= rx_state[`IDX(3)] + t1;
tx_state[`IDX(3)] <= rx_state[`IDX(2)];
tx_state[`IDX(2)] <= rx_state[`IDX(1)];
tx_state[`IDX(1)] <= rx_state[`IDX(0)];
tx_state[`IDX(0)] <= t1 + t2;
end
endmodule
|
/*
*
* Copyright (c) 2011 fpgaminer@bitcoin-mining.com
*
*
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
`timescale 1ns/1ps
// A quick define to help index 32-bit words inside a larger register.
`define IDX(x) (((x)+1)*(32)-1):((x)*(32))
// Perform a SHA-256 transformation on the given 512-bit data, and 256-bit
// initial state,
// Outputs one 256-bit hash every LOOP cycle(s).
//
// The LOOP parameter determines both the size and speed of this module.
// A value of 1 implies a fully unrolled SHA-256 calculation spanning 64 round
// modules and calculating a full SHA-256 hash every clock cycle. A value of
// 2 implies a half-unrolled loop, with 32 round modules and calculating
// a full hash in 2 clock cycles. And so forth.
module sha256_transform #(
parameter LOOP = 7'd64 // For ltcminer
) (
input clk,
input feedback,
input [5:0] cnt,
input [255:0] rx_state,
input [511:0] rx_input,
output reg [255:0] tx_hash
);
// Constants defined by the SHA-2 standard.
localparam Ks = {
32'h428a2f98, 32'h71374491, 32'hb5c0fbcf, 32'he9b5dba5,
32'h3956c25b, 32'h59f111f1, 32'h923f82a4, 32'hab1c5ed5,
32'hd807aa98, 32'h12835b01, 32'h243185be, 32'h550c7dc3,
32'h72be5d74, 32'h80deb1fe, 32'h9bdc06a7, 32'hc19bf174,
32'he49b69c1, 32'hefbe4786, 32'h0fc19dc6, 32'h240ca1cc,
32'h2de92c6f, 32'h4a7484aa, 32'h5cb0a9dc, 32'h76f988da,
32'h983e5152, 32'ha831c66d, 32'hb00327c8, 32'hbf597fc7,
32'hc6e00bf3, 32'hd5a79147, 32'h06ca6351, 32'h14292967,
32'h27b70a85, 32'h2e1b2138, 32'h4d2c6dfc, 32'h53380d13,
32'h650a7354, 32'h766a0abb, 32'h81c2c92e, 32'h92722c85,
32'ha2bfe8a1, 32'ha81a664b, 32'hc24b8b70, 32'hc76c51a3,
32'hd192e819, 32'hd6990624, 32'hf40e3585, 32'h106aa070,
32'h19a4c116, 32'h1e376c08, 32'h2748774c, 32'h34b0bcb5,
32'h391c0cb3, 32'h4ed8aa4a, 32'h5b9cca4f, 32'h682e6ff3,
32'h748f82ee, 32'h78a5636f, 32'h84c87814, 32'h8cc70208,
32'h90befffa, 32'ha4506ceb, 32'hbef9a3f7, 32'hc67178f2};
genvar i;
generate
for (i = 0; i < 64/LOOP; i = i + 1) begin : HASHERS
// These are declared as registers in sha256_digester
wire [511:0] W; // reg tx_w
wire [255:0] state; // reg tx_state
if(i == 0)
sha256_digester U (
.clk(clk),
.k(Ks[32*(63-cnt) +: 32]),
.rx_w(feedback ? W : rx_input),
.rx_state(feedback ? state : rx_state),
.tx_w(W),
.tx_state(state)
);
else
sha256_digester U (
.clk(clk),
.k(Ks[32*(63-LOOP*i-cnt) +: 32]),
.rx_w(feedback ? W : HASHERS[i-1].W),
.rx_state(feedback ? state : HASHERS[i-1].state),
.tx_w(W),
.tx_state(state)
);
end
endgenerate
always @ (posedge clk)
begin
if (!feedback)
begin
tx_hash[`IDX(0)] <= rx_state[`IDX(0)] + HASHERS[64/LOOP-6'd1].state[`IDX(0)];
tx_hash[`IDX(1)] <= rx_state[`IDX(1)] + HASHERS[64/LOOP-6'd1].state[`IDX(1)];
tx_hash[`IDX(2)] <= rx_state[`IDX(2)] + HASHERS[64/LOOP-6'd1].state[`IDX(2)];
tx_hash[`IDX(3)] <= rx_state[`IDX(3)] + HASHERS[64/LOOP-6'd1].state[`IDX(3)];
tx_hash[`IDX(4)] <= rx_state[`IDX(4)] + HASHERS[64/LOOP-6'd1].state[`IDX(4)];
tx_hash[`IDX(5)] <= rx_state[`IDX(5)] + HASHERS[64/LOOP-6'd1].state[`IDX(5)];
tx_hash[`IDX(6)] <= rx_state[`IDX(6)] + HASHERS[64/LOOP-6'd1].state[`IDX(6)];
tx_hash[`IDX(7)] <= rx_state[`IDX(7)] + HASHERS[64/LOOP-6'd1].state[`IDX(7)];
end
end
endmodule
module sha256_digester (clk, k, rx_w, rx_state, tx_w, tx_state);
input clk;
input [31:0] k;
input [511:0] rx_w;
input [255:0] rx_state;
output reg [511:0] tx_w;
output reg [255:0] tx_state;
wire [31:0] e0_w, e1_w, ch_w, maj_w, s0_w, s1_w;
e0 e0_blk (rx_state[`IDX(0)], e0_w);
e1 e1_blk (rx_state[`IDX(4)], e1_w);
ch ch_blk (rx_state[`IDX(4)], rx_state[`IDX(5)], rx_state[`IDX(6)], ch_w);
maj maj_blk (rx_state[`IDX(0)], rx_state[`IDX(1)], rx_state[`IDX(2)], maj_w);
s0 s0_blk (rx_w[63:32], s0_w);
s1 s1_blk (rx_w[479:448], s1_w);
wire [31:0] t1 = rx_state[`IDX(7)] + e1_w + ch_w + rx_w[31:0] + k;
wire [31:0] t2 = e0_w + maj_w;
wire [31:0] new_w = s1_w + rx_w[319:288] + s0_w + rx_w[31:0];
always @ (posedge clk)
begin
tx_w[511:480] <= new_w;
tx_w[479:0] <= rx_w[511:32];
tx_state[`IDX(7)] <= rx_state[`IDX(6)];
tx_state[`IDX(6)] <= rx_state[`IDX(5)];
tx_state[`IDX(5)] <= rx_state[`IDX(4)];
tx_state[`IDX(4)] <= rx_state[`IDX(3)] + t1;
tx_state[`IDX(3)] <= rx_state[`IDX(2)];
tx_state[`IDX(2)] <= rx_state[`IDX(1)];
tx_state[`IDX(1)] <= rx_state[`IDX(0)];
tx_state[`IDX(0)] <= t1 + t2;
end
endmodule
|
/*
*
* Copyright (c) 2011 fpgaminer@bitcoin-mining.com
*
*
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
`timescale 1ns/1ps
// A quick define to help index 32-bit words inside a larger register.
`define IDX(x) (((x)+1)*(32)-1):((x)*(32))
// Perform a SHA-256 transformation on the given 512-bit data, and 256-bit
// initial state,
// Outputs one 256-bit hash every LOOP cycle(s).
//
// The LOOP parameter determines both the size and speed of this module.
// A value of 1 implies a fully unrolled SHA-256 calculation spanning 64 round
// modules and calculating a full SHA-256 hash every clock cycle. A value of
// 2 implies a half-unrolled loop, with 32 round modules and calculating
// a full hash in 2 clock cycles. And so forth.
module sha256_transform #(
parameter LOOP = 7'd64 // For ltcminer
) (
input clk,
input feedback,
input [5:0] cnt,
input [255:0] rx_state,
input [511:0] rx_input,
output reg [255:0] tx_hash
);
// Constants defined by the SHA-2 standard.
localparam Ks = {
32'h428a2f98, 32'h71374491, 32'hb5c0fbcf, 32'he9b5dba5,
32'h3956c25b, 32'h59f111f1, 32'h923f82a4, 32'hab1c5ed5,
32'hd807aa98, 32'h12835b01, 32'h243185be, 32'h550c7dc3,
32'h72be5d74, 32'h80deb1fe, 32'h9bdc06a7, 32'hc19bf174,
32'he49b69c1, 32'hefbe4786, 32'h0fc19dc6, 32'h240ca1cc,
32'h2de92c6f, 32'h4a7484aa, 32'h5cb0a9dc, 32'h76f988da,
32'h983e5152, 32'ha831c66d, 32'hb00327c8, 32'hbf597fc7,
32'hc6e00bf3, 32'hd5a79147, 32'h06ca6351, 32'h14292967,
32'h27b70a85, 32'h2e1b2138, 32'h4d2c6dfc, 32'h53380d13,
32'h650a7354, 32'h766a0abb, 32'h81c2c92e, 32'h92722c85,
32'ha2bfe8a1, 32'ha81a664b, 32'hc24b8b70, 32'hc76c51a3,
32'hd192e819, 32'hd6990624, 32'hf40e3585, 32'h106aa070,
32'h19a4c116, 32'h1e376c08, 32'h2748774c, 32'h34b0bcb5,
32'h391c0cb3, 32'h4ed8aa4a, 32'h5b9cca4f, 32'h682e6ff3,
32'h748f82ee, 32'h78a5636f, 32'h84c87814, 32'h8cc70208,
32'h90befffa, 32'ha4506ceb, 32'hbef9a3f7, 32'hc67178f2};
genvar i;
generate
for (i = 0; i < 64/LOOP; i = i + 1) begin : HASHERS
// These are declared as registers in sha256_digester
wire [511:0] W; // reg tx_w
wire [255:0] state; // reg tx_state
if(i == 0)
sha256_digester U (
.clk(clk),
.k(Ks[32*(63-cnt) +: 32]),
.rx_w(feedback ? W : rx_input),
.rx_state(feedback ? state : rx_state),
.tx_w(W),
.tx_state(state)
);
else
sha256_digester U (
.clk(clk),
.k(Ks[32*(63-LOOP*i-cnt) +: 32]),
.rx_w(feedback ? W : HASHERS[i-1].W),
.rx_state(feedback ? state : HASHERS[i-1].state),
.tx_w(W),
.tx_state(state)
);
end
endgenerate
always @ (posedge clk)
begin
if (!feedback)
begin
tx_hash[`IDX(0)] <= rx_state[`IDX(0)] + HASHERS[64/LOOP-6'd1].state[`IDX(0)];
tx_hash[`IDX(1)] <= rx_state[`IDX(1)] + HASHERS[64/LOOP-6'd1].state[`IDX(1)];
tx_hash[`IDX(2)] <= rx_state[`IDX(2)] + HASHERS[64/LOOP-6'd1].state[`IDX(2)];
tx_hash[`IDX(3)] <= rx_state[`IDX(3)] + HASHERS[64/LOOP-6'd1].state[`IDX(3)];
tx_hash[`IDX(4)] <= rx_state[`IDX(4)] + HASHERS[64/LOOP-6'd1].state[`IDX(4)];
tx_hash[`IDX(5)] <= rx_state[`IDX(5)] + HASHERS[64/LOOP-6'd1].state[`IDX(5)];
tx_hash[`IDX(6)] <= rx_state[`IDX(6)] + HASHERS[64/LOOP-6'd1].state[`IDX(6)];
tx_hash[`IDX(7)] <= rx_state[`IDX(7)] + HASHERS[64/LOOP-6'd1].state[`IDX(7)];
end
end
endmodule
module sha256_digester (clk, k, rx_w, rx_state, tx_w, tx_state);
input clk;
input [31:0] k;
input [511:0] rx_w;
input [255:0] rx_state;
output reg [511:0] tx_w;
output reg [255:0] tx_state;
wire [31:0] e0_w, e1_w, ch_w, maj_w, s0_w, s1_w;
e0 e0_blk (rx_state[`IDX(0)], e0_w);
e1 e1_blk (rx_state[`IDX(4)], e1_w);
ch ch_blk (rx_state[`IDX(4)], rx_state[`IDX(5)], rx_state[`IDX(6)], ch_w);
maj maj_blk (rx_state[`IDX(0)], rx_state[`IDX(1)], rx_state[`IDX(2)], maj_w);
s0 s0_blk (rx_w[63:32], s0_w);
s1 s1_blk (rx_w[479:448], s1_w);
wire [31:0] t1 = rx_state[`IDX(7)] + e1_w + ch_w + rx_w[31:0] + k;
wire [31:0] t2 = e0_w + maj_w;
wire [31:0] new_w = s1_w + rx_w[319:288] + s0_w + rx_w[31:0];
always @ (posedge clk)
begin
tx_w[511:480] <= new_w;
tx_w[479:0] <= rx_w[511:32];
tx_state[`IDX(7)] <= rx_state[`IDX(6)];
tx_state[`IDX(6)] <= rx_state[`IDX(5)];
tx_state[`IDX(5)] <= rx_state[`IDX(4)];
tx_state[`IDX(4)] <= rx_state[`IDX(3)] + t1;
tx_state[`IDX(3)] <= rx_state[`IDX(2)];
tx_state[`IDX(2)] <= rx_state[`IDX(1)];
tx_state[`IDX(1)] <= rx_state[`IDX(0)];
tx_state[`IDX(0)] <= t1 + t2;
end
endmodule
|
// Taken from http://www.europa.com/~celiac/fsm_samp.html
// These are the symbolic names for states
parameter [1:0] //synopsys enum state_info
S0 = 2'h0,
S1 = 2'h1,
S2 = 2'h2,
S3 = 2'h3;
// These are the current state and next state variables
reg [1:0] /* synopsys enum state_info */ state;
reg [1:0] /* synopsys enum state_info */ next_state;
// synopsys state_vector state
always @ (state or y or x)
begin
next_state = state;
case (state) // synopsys full_case parallel_case
S0: begin
if (x) begin
next_state = S1;
end
else begin
next_state = S2;
end
end
S1: begin
if (y) begin
next_state = S2;
end
else begin
next_state = S0;
end
end
S2: begin
if (x & y) begin
next_state = S3;
end
else begin
next_state = S0;
end
end
S3: begin
next_state = S0;
end
endcase
end
always @ (posedge clk or posedge reset)
begin
if (reset) begin
state <= S0;
end
else begin
state <= next_state;
end
end
|
// Taken from http://www.europa.com/~celiac/fsm_samp.html
// These are the symbolic names for states
parameter [1:0] //synopsys enum state_info
S0 = 2'h0,
S1 = 2'h1,
S2 = 2'h2,
S3 = 2'h3;
// These are the current state and next state variables
reg [1:0] /* synopsys enum state_info */ state;
reg [1:0] /* synopsys enum state_info */ next_state;
// synopsys state_vector state
always @ (state or y or x)
begin
next_state = state;
case (state) // synopsys full_case parallel_case
S0: begin
if (x) begin
next_state = S1;
end
else begin
next_state = S2;
end
end
S1: begin
if (y) begin
next_state = S2;
end
else begin
next_state = S0;
end
end
S2: begin
if (x & y) begin
next_state = S3;
end
else begin
next_state = S0;
end
end
S3: begin
next_state = S0;
end
endcase
end
always @ (posedge clk or posedge reset)
begin
if (reset) begin
state <= S0;
end
else begin
state <= next_state;
end
end
|
// Taken from http://www.europa.com/~celiac/fsm_samp.html
// These are the symbolic names for states
parameter [1:0] //synopsys enum state_info
S0 = 2'h0,
S1 = 2'h1,
S2 = 2'h2,
S3 = 2'h3;
// These are the current state and next state variables
reg [1:0] /* synopsys enum state_info */ state;
reg [1:0] /* synopsys enum state_info */ next_state;
// synopsys state_vector state
always @ (state or y or x)
begin
next_state = state;
case (state) // synopsys full_case parallel_case
S0: begin
if (x) begin
next_state = S1;
end
else begin
next_state = S2;
end
end
S1: begin
if (y) begin
next_state = S2;
end
else begin
next_state = S0;
end
end
S2: begin
if (x & y) begin
next_state = S3;
end
else begin
next_state = S0;
end
end
S3: begin
next_state = S0;
end
endcase
end
always @ (posedge clk or posedge reset)
begin
if (reset) begin
state <= S0;
end
else begin
state <= next_state;
end
end
|
// Taken from http://www.europa.com/~celiac/fsm_samp.html
// These are the symbolic names for states
parameter [1:0] //synopsys enum state_info
S0 = 2'h0,
S1 = 2'h1,
S2 = 2'h2,
S3 = 2'h3;
// These are the current state and next state variables
reg [1:0] /* synopsys enum state_info */ state;
reg [1:0] /* synopsys enum state_info */ next_state;
// synopsys state_vector state
always @ (state or y or x)
begin
next_state = state;
case (state) // synopsys full_case parallel_case
S0: begin
if (x) begin
next_state = S1;
end
else begin
next_state = S2;
end
end
S1: begin
if (y) begin
next_state = S2;
end
else begin
next_state = S0;
end
end
S2: begin
if (x & y) begin
next_state = S3;
end
else begin
next_state = S0;
end
end
S3: begin
next_state = S0;
end
endcase
end
always @ (posedge clk or posedge reset)
begin
if (reset) begin
state <= S0;
end
else begin
state <= next_state;
end
end
|
// Taken from http://www.europa.com/~celiac/fsm_samp.html
// These are the symbolic names for states
parameter [1:0] //synopsys enum state_info
S0 = 2'h0,
S1 = 2'h1,
S2 = 2'h2,
S3 = 2'h3;
// These are the current state and next state variables
reg [1:0] /* synopsys enum state_info */ state;
reg [1:0] /* synopsys enum state_info */ next_state;
// synopsys state_vector state
always @ (state or y or x)
begin
next_state = state;
case (state) // synopsys full_case parallel_case
S0: begin
if (x) begin
next_state = S1;
end
else begin
next_state = S2;
end
end
S1: begin
if (y) begin
next_state = S2;
end
else begin
next_state = S0;
end
end
S2: begin
if (x & y) begin
next_state = S3;
end
else begin
next_state = S0;
end
end
S3: begin
next_state = S0;
end
endcase
end
always @ (posedge clk or posedge reset)
begin
if (reset) begin
state <= S0;
end
else begin
state <= next_state;
end
end
|
// Taken from http://www.europa.com/~celiac/fsm_samp.html
// These are the symbolic names for states
parameter [1:0] //synopsys enum state_info
S0 = 2'h0,
S1 = 2'h1,
S2 = 2'h2,
S3 = 2'h3;
// These are the current state and next state variables
reg [1:0] /* synopsys enum state_info */ state;
reg [1:0] /* synopsys enum state_info */ next_state;
// synopsys state_vector state
always @ (state or y or x)
begin
next_state = state;
case (state) // synopsys full_case parallel_case
S0: begin
if (x) begin
next_state = S1;
end
else begin
next_state = S2;
end
end
S1: begin
if (y) begin
next_state = S2;
end
else begin
next_state = S0;
end
end
S2: begin
if (x & y) begin
next_state = S3;
end
else begin
next_state = S0;
end
end
S3: begin
next_state = S0;
end
endcase
end
always @ (posedge clk or posedge reset)
begin
if (reset) begin
state <= S0;
end
else begin
state <= next_state;
end
end
|
// Taken from http://www.europa.com/~celiac/fsm_samp.html
// These are the symbolic names for states
parameter [1:0] //synopsys enum state_info
S0 = 2'h0,
S1 = 2'h1,
S2 = 2'h2,
S3 = 2'h3;
// These are the current state and next state variables
reg [1:0] /* synopsys enum state_info */ state;
reg [1:0] /* synopsys enum state_info */ next_state;
// synopsys state_vector state
always @ (state or y or x)
begin
next_state = state;
case (state) // synopsys full_case parallel_case
S0: begin
if (x) begin
next_state = S1;
end
else begin
next_state = S2;
end
end
S1: begin
if (y) begin
next_state = S2;
end
else begin
next_state = S0;
end
end
S2: begin
if (x & y) begin
next_state = S3;
end
else begin
next_state = S0;
end
end
S3: begin
next_state = S0;
end
endcase
end
always @ (posedge clk or posedge reset)
begin
if (reset) begin
state <= S0;
end
else begin
state <= next_state;
end
end
|
// Taken from http://www.europa.com/~celiac/fsm_samp.html
// These are the symbolic names for states
parameter [1:0] //synopsys enum state_info
S0 = 2'h0,
S1 = 2'h1,
S2 = 2'h2,
S3 = 2'h3;
// These are the current state and next state variables
reg [1:0] /* synopsys enum state_info */ state;
reg [1:0] /* synopsys enum state_info */ next_state;
// synopsys state_vector state
always @ (state or y or x)
begin
next_state = state;
case (state) // synopsys full_case parallel_case
S0: begin
if (x) begin
next_state = S1;
end
else begin
next_state = S2;
end
end
S1: begin
if (y) begin
next_state = S2;
end
else begin
next_state = S0;
end
end
S2: begin
if (x & y) begin
next_state = S3;
end
else begin
next_state = S0;
end
end
S3: begin
next_state = S0;
end
endcase
end
always @ (posedge clk or posedge reset)
begin
if (reset) begin
state <= S0;
end
else begin
state <= next_state;
end
end
|
`include "hi_simulate.v"
/*
pck0 - input main 24Mhz clock (PLL / 4)
[7:0] adc_d - input data from A/D converter
mod_type - modulation type
pwr_lo - output to coil drivers (ssp_clk / 8)
adc_clk - output A/D clock signal
ssp_frame - output SSS frame indicator (goes high while the 8 bits are shifted)
ssp_din - output SSP data to ARM (shifts 8 bit A/D value serially to ARM MSB first)
ssp_clk - output SSP clock signal
ck_1356meg - input unused
ck_1356megb - input unused
ssp_dout - input unused
cross_hi - input unused
cross_lo - input unused
pwr_hi - output unused, tied low
pwr_oe1 - output unused, undefined
pwr_oe2 - output unused, undefined
pwr_oe3 - output unused, undefined
pwr_oe4 - output unused, undefined
dbg - output alias for adc_clk
*/
module testbed_hi_simulate;
reg pck0;
reg [7:0] adc_d;
reg mod_type;
wire pwr_lo;
wire adc_clk;
reg ck_1356meg;
reg ck_1356megb;
wire ssp_frame;
wire ssp_din;
wire ssp_clk;
reg ssp_dout;
wire pwr_hi;
wire pwr_oe1;
wire pwr_oe2;
wire pwr_oe3;
wire pwr_oe4;
wire cross_lo;
wire cross_hi;
wire dbg;
hi_simulate #(5,200) dut(
.pck0(pck0),
.ck_1356meg(ck_1356meg),
.ck_1356megb(ck_1356megb),
.pwr_lo(pwr_lo),
.pwr_hi(pwr_hi),
.pwr_oe1(pwr_oe1),
.pwr_oe2(pwr_oe2),
.pwr_oe3(pwr_oe3),
.pwr_oe4(pwr_oe4),
.adc_d(adc_d),
.adc_clk(adc_clk),
.ssp_frame(ssp_frame),
.ssp_din(ssp_din),
.ssp_dout(ssp_dout),
.ssp_clk(ssp_clk),
.cross_hi(cross_hi),
.cross_lo(cross_lo),
.dbg(dbg),
.mod_type(mod_type)
);
integer idx, i;
// main clock
always #5 begin
ck_1356megb = !ck_1356megb;
ck_1356meg = ck_1356megb;
end
always begin
@(negedge adc_clk) ;
adc_d = $random;
end
//crank DUT
task crank_dut;
begin
@(negedge ssp_clk) ;
ssp_dout = $random;
end
endtask
initial begin
// init inputs
ck_1356megb = 0;
// random values
adc_d = 0;
ssp_dout=1;
// shallow modulation off
mod_type=0;
for (i = 0 ; i < 16 ; i = i + 1) begin
crank_dut;
end
// shallow modulation on
mod_type=1;
for (i = 0 ; i < 16 ; i = i + 1) begin
crank_dut;
end
$finish;
end
endmodule // main
|
//-----------------------------------------------------------------------------
//-- (c) Copyright 2010 Xilinx, Inc. All rights reserved.
//--
//-- This file contains confidential and proprietary information
//-- of Xilinx, Inc. and is protected under U.S. and
//-- international copyright and other intellectual property
//-- laws.
//--
//-- DISCLAIMER
//-- This disclaimer is not a license and does not grant any
//-- rights to the materials distributed herewith. Except as
//-- otherwise provided in a valid license issued to you by
//-- Xilinx, and to the maximum extent permitted by applicable
//-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
//-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
//-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
//-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
//-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
//-- (2) Xilinx shall not be liable (whether in contract or tort,
//-- including negligence, or under any other theory of
//-- liability) for any loss or damage of any kind or nature
//-- related to, arising under or in connection with these
//-- materials, including for any direct, or any indirect,
//-- special, incidental, or consequential loss or damage
//-- (including loss of data, profits, goodwill, or any type of
//-- loss or damage suffered as a result of any action brought
//-- by a third party) even if such damage or loss was
//-- reasonably foreseeable or Xilinx had been advised of the
//-- possibility of the same.
//--
//-- CRITICAL APPLICATIONS
//-- Xilinx products are not designed or intended to be fail-
//-- safe, or for use in any application requiring fail-safe
//-- performance, such as life-support or safety devices or
//-- systems, Class III medical devices, nuclear facilities,
//-- applications related to the deployment of airbags, or any
//-- other applications that could lead to death, personal
//-- injury, or severe property or environmental damage
//-- (individually and collectively, "Critical
//-- Applications"). Customer assumes the sole risk and
//-- liability of any use of Xilinx products in Critical
//-- Applications, subject only to applicable laws and
//-- regulations governing limitations on product liability.
//--
//-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
//-- PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
//
// Description: ACP Transaction Checker
//
// Check for optimized ACP transactions and flag if they are broken.
//
//
//
// Verilog-standard: Verilog 2001
//--------------------------------------------------------------------------
//
// Structure:
// atc
// aw_atc
// w_atc
// b_atc
//
//--------------------------------------------------------------------------
`timescale 1ps/1ps
`default_nettype none
module processing_system7_v5_5_atc #
(
parameter C_FAMILY = "rtl",
// FPGA Family. Current version: virtex6, spartan6 or later.
parameter integer C_AXI_ID_WIDTH = 4,
// Width of all ID signals on SI and MI side of checker.
// Range: >= 1.
parameter integer C_AXI_ADDR_WIDTH = 32,
// Width of all ADDR signals on SI and MI side of checker.
// Range: 32.
parameter integer C_AXI_DATA_WIDTH = 64,
// Width of all DATA signals on SI and MI side of checker.
// Range: 64.
parameter integer C_AXI_AWUSER_WIDTH = 1,
// Width of AWUSER signals.
// Range: >= 1.
parameter integer C_AXI_ARUSER_WIDTH = 1,
// Width of ARUSER signals.
// Range: >= 1.
parameter integer C_AXI_WUSER_WIDTH = 1,
// Width of WUSER signals.
// Range: >= 1.
parameter integer C_AXI_RUSER_WIDTH = 1,
// Width of RUSER signals.
// Range: >= 1.
parameter integer C_AXI_BUSER_WIDTH = 1
// Width of BUSER signals.
// Range: >= 1.
)
(
// Global Signals
input wire ACLK,
input wire ARESETN,
// Slave Interface Write Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_AWID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_AWADDR,
input wire [4-1:0] S_AXI_AWLEN,
input wire [3-1:0] S_AXI_AWSIZE,
input wire [2-1:0] S_AXI_AWBURST,
input wire [2-1:0] S_AXI_AWLOCK,
input wire [4-1:0] S_AXI_AWCACHE,
input wire [3-1:0] S_AXI_AWPROT,
input wire [C_AXI_AWUSER_WIDTH-1:0] S_AXI_AWUSER,
input wire S_AXI_AWVALID,
output wire S_AXI_AWREADY,
// Slave Interface Write Data Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_WID,
input wire [C_AXI_DATA_WIDTH-1:0] S_AXI_WDATA,
input wire [C_AXI_DATA_WIDTH/8-1:0] S_AXI_WSTRB,
input wire S_AXI_WLAST,
input wire [C_AXI_WUSER_WIDTH-1:0] S_AXI_WUSER,
input wire S_AXI_WVALID,
output wire S_AXI_WREADY,
// Slave Interface Write Response Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_BID,
output wire [2-1:0] S_AXI_BRESP,
output wire [C_AXI_BUSER_WIDTH-1:0] S_AXI_BUSER,
output wire S_AXI_BVALID,
input wire S_AXI_BREADY,
// Slave Interface Read Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_ARID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_ARADDR,
input wire [4-1:0] S_AXI_ARLEN,
input wire [3-1:0] S_AXI_ARSIZE,
input wire [2-1:0] S_AXI_ARBURST,
input wire [2-1:0] S_AXI_ARLOCK,
input wire [4-1:0] S_AXI_ARCACHE,
input wire [3-1:0] S_AXI_ARPROT,
input wire [C_AXI_ARUSER_WIDTH-1:0] S_AXI_ARUSER,
input wire S_AXI_ARVALID,
output wire S_AXI_ARREADY,
// Slave Interface Read Data Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_RID,
output wire [C_AXI_DATA_WIDTH-1:0] S_AXI_RDATA,
output wire [2-1:0] S_AXI_RRESP,
output wire S_AXI_RLAST,
output wire [C_AXI_RUSER_WIDTH-1:0] S_AXI_RUSER,
output wire S_AXI_RVALID,
input wire S_AXI_RREADY,
// Master Interface Write Address Port
output wire [C_AXI_ID_WIDTH-1:0] M_AXI_AWID,
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_AWADDR,
output wire [4-1:0] M_AXI_AWLEN,
output wire [3-1:0] M_AXI_AWSIZE,
output wire [2-1:0] M_AXI_AWBURST,
output wire [2-1:0] M_AXI_AWLOCK,
output wire [4-1:0] M_AXI_AWCACHE,
output wire [3-1:0] M_AXI_AWPROT,
output wire [C_AXI_AWUSER_WIDTH-1:0] M_AXI_AWUSER,
output wire M_AXI_AWVALID,
input wire M_AXI_AWREADY,
// Master Interface Write Data Ports
output wire [C_AXI_ID_WIDTH-1:0] M_AXI_WID,
output wire [C_AXI_DATA_WIDTH-1:0] M_AXI_WDATA,
output wire [C_AXI_DATA_WIDTH/8-1:0] M_AXI_WSTRB,
output wire M_AXI_WLAST,
output wire [C_AXI_WUSER_WIDTH-1:0] M_AXI_WUSER,
output wire M_AXI_WVALID,
input wire M_AXI_WREADY,
// Master Interface Write Response Ports
input wire [C_AXI_ID_WIDTH-1:0] M_AXI_BID,
input wire [2-1:0] M_AXI_BRESP,
input wire [C_AXI_BUSER_WIDTH-1:0] M_AXI_BUSER,
input wire M_AXI_BVALID,
output wire M_AXI_BREADY,
// Master Interface Read Address Port
output wire [C_AXI_ID_WIDTH-1:0] M_AXI_ARID,
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_ARADDR,
output wire [4-1:0] M_AXI_ARLEN,
output wire [3-1:0] M_AXI_ARSIZE,
output wire [2-1:0] M_AXI_ARBURST,
output wire [2-1:0] M_AXI_ARLOCK,
output wire [4-1:0] M_AXI_ARCACHE,
output wire [3-1:0] M_AXI_ARPROT,
output wire [C_AXI_ARUSER_WIDTH-1:0] M_AXI_ARUSER,
output wire M_AXI_ARVALID,
input wire M_AXI_ARREADY,
// Master Interface Read Data Ports
input wire [C_AXI_ID_WIDTH-1:0] M_AXI_RID,
input wire [C_AXI_DATA_WIDTH-1:0] M_AXI_RDATA,
input wire [2-1:0] M_AXI_RRESP,
input wire M_AXI_RLAST,
input wire [C_AXI_RUSER_WIDTH-1:0] M_AXI_RUSER,
input wire M_AXI_RVALID,
output wire M_AXI_RREADY,
output wire ERROR_TRIGGER,
output wire [C_AXI_ID_WIDTH-1:0] ERROR_TRANSACTION_ID
);
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
localparam C_FIFO_DEPTH_LOG = 4;
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
// Internal reset.
reg ARESET;
// AW->W command queue signals.
wire cmd_w_valid;
wire cmd_w_check;
wire [C_AXI_ID_WIDTH-1:0] cmd_w_id;
wire cmd_w_ready;
// W->B command queue signals.
wire cmd_b_push;
wire cmd_b_error;
wire [C_AXI_ID_WIDTH-1:0] cmd_b_id;
wire cmd_b_full;
wire [C_FIFO_DEPTH_LOG-1:0] cmd_b_addr;
wire cmd_b_ready;
/////////////////////////////////////////////////////////////////////////////
// Handle Internal Reset
/////////////////////////////////////////////////////////////////////////////
always @ (posedge ACLK) begin
ARESET <= !ARESETN;
end
/////////////////////////////////////////////////////////////////////////////
// Handle Write Channels (AW/W/B)
/////////////////////////////////////////////////////////////////////////////
// Write Address Channel.
processing_system7_v5_5_aw_atc #
(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_ADDR_WIDTH (C_AXI_ADDR_WIDTH),
.C_AXI_AWUSER_WIDTH (C_AXI_AWUSER_WIDTH),
.C_FIFO_DEPTH_LOG (C_FIFO_DEPTH_LOG)
) write_addr_inst
(
// Global Signals
.ARESET (ARESET),
.ACLK (ACLK),
// Command Interface (Out)
.cmd_w_valid (cmd_w_valid),
.cmd_w_check (cmd_w_check),
.cmd_w_id (cmd_w_id),
.cmd_w_ready (cmd_w_ready),
.cmd_b_addr (cmd_b_addr),
.cmd_b_ready (cmd_b_ready),
// Slave Interface Write Address Ports
.S_AXI_AWID (S_AXI_AWID),
.S_AXI_AWADDR (S_AXI_AWADDR),
.S_AXI_AWLEN (S_AXI_AWLEN),
.S_AXI_AWSIZE (S_AXI_AWSIZE),
.S_AXI_AWBURST (S_AXI_AWBURST),
.S_AXI_AWLOCK (S_AXI_AWLOCK),
.S_AXI_AWCACHE (S_AXI_AWCACHE),
.S_AXI_AWPROT (S_AXI_AWPROT),
.S_AXI_AWUSER (S_AXI_AWUSER),
.S_AXI_AWVALID (S_AXI_AWVALID),
.S_AXI_AWREADY (S_AXI_AWREADY),
// Master Interface Write Address Port
.M_AXI_AWID (M_AXI_AWID),
.M_AXI_AWADDR (M_AXI_AWADDR),
.M_AXI_AWLEN (M_AXI_AWLEN),
.M_AXI_AWSIZE (M_AXI_AWSIZE),
.M_AXI_AWBURST (M_AXI_AWBURST),
.M_AXI_AWLOCK (M_AXI_AWLOCK),
.M_AXI_AWCACHE (M_AXI_AWCACHE),
.M_AXI_AWPROT (M_AXI_AWPROT),
.M_AXI_AWUSER (M_AXI_AWUSER),
.M_AXI_AWVALID (M_AXI_AWVALID),
.M_AXI_AWREADY (M_AXI_AWREADY)
);
// Write Data channel.
processing_system7_v5_5_w_atc #
(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_WUSER_WIDTH (C_AXI_WUSER_WIDTH)
) write_data_inst
(
// Global Signals
.ARESET (ARESET),
.ACLK (ACLK),
// Command Interface (In)
.cmd_w_valid (cmd_w_valid),
.cmd_w_check (cmd_w_check),
.cmd_w_id (cmd_w_id),
.cmd_w_ready (cmd_w_ready),
// Command Interface (Out)
.cmd_b_push (cmd_b_push),
.cmd_b_error (cmd_b_error),
.cmd_b_id (cmd_b_id),
.cmd_b_full (cmd_b_full),
// Slave Interface Write Data Ports
.S_AXI_WID (S_AXI_WID),
.S_AXI_WDATA (S_AXI_WDATA),
.S_AXI_WSTRB (S_AXI_WSTRB),
.S_AXI_WLAST (S_AXI_WLAST),
.S_AXI_WUSER (S_AXI_WUSER),
.S_AXI_WVALID (S_AXI_WVALID),
.S_AXI_WREADY (S_AXI_WREADY),
// Master Interface Write Data Ports
.M_AXI_WID (M_AXI_WID),
.M_AXI_WDATA (M_AXI_WDATA),
.M_AXI_WSTRB (M_AXI_WSTRB),
.M_AXI_WLAST (M_AXI_WLAST),
.M_AXI_WUSER (M_AXI_WUSER),
.M_AXI_WVALID (M_AXI_WVALID),
.M_AXI_WREADY (M_AXI_WREADY)
);
// Write Response channel.
processing_system7_v5_5_b_atc #
(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_BUSER_WIDTH (C_AXI_BUSER_WIDTH),
.C_FIFO_DEPTH_LOG (C_FIFO_DEPTH_LOG)
) write_response_inst
(
// Global Signals
.ARESET (ARESET),
.ACLK (ACLK),
// Command Interface (In)
.cmd_b_push (cmd_b_push),
.cmd_b_error (cmd_b_error),
.cmd_b_id (cmd_b_id),
.cmd_b_full (cmd_b_full),
.cmd_b_addr (cmd_b_addr),
.cmd_b_ready (cmd_b_ready),
// Slave Interface Write Response Ports
.S_AXI_BID (S_AXI_BID),
.S_AXI_BRESP (S_AXI_BRESP),
.S_AXI_BUSER (S_AXI_BUSER),
.S_AXI_BVALID (S_AXI_BVALID),
.S_AXI_BREADY (S_AXI_BREADY),
// Master Interface Write Response Ports
.M_AXI_BID (M_AXI_BID),
.M_AXI_BRESP (M_AXI_BRESP),
.M_AXI_BUSER (M_AXI_BUSER),
.M_AXI_BVALID (M_AXI_BVALID),
.M_AXI_BREADY (M_AXI_BREADY),
// Trigger detection
.ERROR_TRIGGER (ERROR_TRIGGER),
.ERROR_TRANSACTION_ID (ERROR_TRANSACTION_ID)
);
/////////////////////////////////////////////////////////////////////////////
// Handle Read Channels (AR/R)
/////////////////////////////////////////////////////////////////////////////
// Read Address Port
assign M_AXI_ARID = S_AXI_ARID;
assign M_AXI_ARADDR = S_AXI_ARADDR;
assign M_AXI_ARLEN = S_AXI_ARLEN;
assign M_AXI_ARSIZE = S_AXI_ARSIZE;
assign M_AXI_ARBURST = S_AXI_ARBURST;
assign M_AXI_ARLOCK = S_AXI_ARLOCK;
assign M_AXI_ARCACHE = S_AXI_ARCACHE;
assign M_AXI_ARPROT = S_AXI_ARPROT;
assign M_AXI_ARUSER = S_AXI_ARUSER;
assign M_AXI_ARVALID = S_AXI_ARVALID;
assign S_AXI_ARREADY = M_AXI_ARREADY;
// Read Data Port
assign S_AXI_RID = M_AXI_RID;
assign S_AXI_RDATA = M_AXI_RDATA;
assign S_AXI_RRESP = M_AXI_RRESP;
assign S_AXI_RLAST = M_AXI_RLAST;
assign S_AXI_RUSER = M_AXI_RUSER;
assign S_AXI_RVALID = M_AXI_RVALID;
assign M_AXI_RREADY = S_AXI_RREADY;
endmodule
`default_nettype wire
|
//-----------------------------------------------------------------------------
//-- (c) Copyright 2010 Xilinx, Inc. All rights reserved.
//--
//-- This file contains confidential and proprietary information
//-- of Xilinx, Inc. and is protected under U.S. and
//-- international copyright and other intellectual property
//-- laws.
//--
//-- DISCLAIMER
//-- This disclaimer is not a license and does not grant any
//-- rights to the materials distributed herewith. Except as
//-- otherwise provided in a valid license issued to you by
//-- Xilinx, and to the maximum extent permitted by applicable
//-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
//-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
//-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
//-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
//-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
//-- (2) Xilinx shall not be liable (whether in contract or tort,
//-- including negligence, or under any other theory of
//-- liability) for any loss or damage of any kind or nature
//-- related to, arising under or in connection with these
//-- materials, including for any direct, or any indirect,
//-- special, incidental, or consequential loss or damage
//-- (including loss of data, profits, goodwill, or any type of
//-- loss or damage suffered as a result of any action brought
//-- by a third party) even if such damage or loss was
//-- reasonably foreseeable or Xilinx had been advised of the
//-- possibility of the same.
//--
//-- CRITICAL APPLICATIONS
//-- Xilinx products are not designed or intended to be fail-
//-- safe, or for use in any application requiring fail-safe
//-- performance, such as life-support or safety devices or
//-- systems, Class III medical devices, nuclear facilities,
//-- applications related to the deployment of airbags, or any
//-- other applications that could lead to death, personal
//-- injury, or severe property or environmental damage
//-- (individually and collectively, "Critical
//-- Applications"). Customer assumes the sole risk and
//-- liability of any use of Xilinx products in Critical
//-- Applications, subject only to applicable laws and
//-- regulations governing limitations on product liability.
//--
//-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
//-- PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
//
// Description: ACP Transaction Checker
//
// Check for optimized ACP transactions and flag if they are broken.
//
//
//
// Verilog-standard: Verilog 2001
//--------------------------------------------------------------------------
//
// Structure:
// atc
// aw_atc
// w_atc
// b_atc
//
//--------------------------------------------------------------------------
`timescale 1ps/1ps
`default_nettype none
module processing_system7_v5_5_atc #
(
parameter C_FAMILY = "rtl",
// FPGA Family. Current version: virtex6, spartan6 or later.
parameter integer C_AXI_ID_WIDTH = 4,
// Width of all ID signals on SI and MI side of checker.
// Range: >= 1.
parameter integer C_AXI_ADDR_WIDTH = 32,
// Width of all ADDR signals on SI and MI side of checker.
// Range: 32.
parameter integer C_AXI_DATA_WIDTH = 64,
// Width of all DATA signals on SI and MI side of checker.
// Range: 64.
parameter integer C_AXI_AWUSER_WIDTH = 1,
// Width of AWUSER signals.
// Range: >= 1.
parameter integer C_AXI_ARUSER_WIDTH = 1,
// Width of ARUSER signals.
// Range: >= 1.
parameter integer C_AXI_WUSER_WIDTH = 1,
// Width of WUSER signals.
// Range: >= 1.
parameter integer C_AXI_RUSER_WIDTH = 1,
// Width of RUSER signals.
// Range: >= 1.
parameter integer C_AXI_BUSER_WIDTH = 1
// Width of BUSER signals.
// Range: >= 1.
)
(
// Global Signals
input wire ACLK,
input wire ARESETN,
// Slave Interface Write Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_AWID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_AWADDR,
input wire [4-1:0] S_AXI_AWLEN,
input wire [3-1:0] S_AXI_AWSIZE,
input wire [2-1:0] S_AXI_AWBURST,
input wire [2-1:0] S_AXI_AWLOCK,
input wire [4-1:0] S_AXI_AWCACHE,
input wire [3-1:0] S_AXI_AWPROT,
input wire [C_AXI_AWUSER_WIDTH-1:0] S_AXI_AWUSER,
input wire S_AXI_AWVALID,
output wire S_AXI_AWREADY,
// Slave Interface Write Data Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_WID,
input wire [C_AXI_DATA_WIDTH-1:0] S_AXI_WDATA,
input wire [C_AXI_DATA_WIDTH/8-1:0] S_AXI_WSTRB,
input wire S_AXI_WLAST,
input wire [C_AXI_WUSER_WIDTH-1:0] S_AXI_WUSER,
input wire S_AXI_WVALID,
output wire S_AXI_WREADY,
// Slave Interface Write Response Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_BID,
output wire [2-1:0] S_AXI_BRESP,
output wire [C_AXI_BUSER_WIDTH-1:0] S_AXI_BUSER,
output wire S_AXI_BVALID,
input wire S_AXI_BREADY,
// Slave Interface Read Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_ARID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_ARADDR,
input wire [4-1:0] S_AXI_ARLEN,
input wire [3-1:0] S_AXI_ARSIZE,
input wire [2-1:0] S_AXI_ARBURST,
input wire [2-1:0] S_AXI_ARLOCK,
input wire [4-1:0] S_AXI_ARCACHE,
input wire [3-1:0] S_AXI_ARPROT,
input wire [C_AXI_ARUSER_WIDTH-1:0] S_AXI_ARUSER,
input wire S_AXI_ARVALID,
output wire S_AXI_ARREADY,
// Slave Interface Read Data Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_RID,
output wire [C_AXI_DATA_WIDTH-1:0] S_AXI_RDATA,
output wire [2-1:0] S_AXI_RRESP,
output wire S_AXI_RLAST,
output wire [C_AXI_RUSER_WIDTH-1:0] S_AXI_RUSER,
output wire S_AXI_RVALID,
input wire S_AXI_RREADY,
// Master Interface Write Address Port
output wire [C_AXI_ID_WIDTH-1:0] M_AXI_AWID,
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_AWADDR,
output wire [4-1:0] M_AXI_AWLEN,
output wire [3-1:0] M_AXI_AWSIZE,
output wire [2-1:0] M_AXI_AWBURST,
output wire [2-1:0] M_AXI_AWLOCK,
output wire [4-1:0] M_AXI_AWCACHE,
output wire [3-1:0] M_AXI_AWPROT,
output wire [C_AXI_AWUSER_WIDTH-1:0] M_AXI_AWUSER,
output wire M_AXI_AWVALID,
input wire M_AXI_AWREADY,
// Master Interface Write Data Ports
output wire [C_AXI_ID_WIDTH-1:0] M_AXI_WID,
output wire [C_AXI_DATA_WIDTH-1:0] M_AXI_WDATA,
output wire [C_AXI_DATA_WIDTH/8-1:0] M_AXI_WSTRB,
output wire M_AXI_WLAST,
output wire [C_AXI_WUSER_WIDTH-1:0] M_AXI_WUSER,
output wire M_AXI_WVALID,
input wire M_AXI_WREADY,
// Master Interface Write Response Ports
input wire [C_AXI_ID_WIDTH-1:0] M_AXI_BID,
input wire [2-1:0] M_AXI_BRESP,
input wire [C_AXI_BUSER_WIDTH-1:0] M_AXI_BUSER,
input wire M_AXI_BVALID,
output wire M_AXI_BREADY,
// Master Interface Read Address Port
output wire [C_AXI_ID_WIDTH-1:0] M_AXI_ARID,
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_ARADDR,
output wire [4-1:0] M_AXI_ARLEN,
output wire [3-1:0] M_AXI_ARSIZE,
output wire [2-1:0] M_AXI_ARBURST,
output wire [2-1:0] M_AXI_ARLOCK,
output wire [4-1:0] M_AXI_ARCACHE,
output wire [3-1:0] M_AXI_ARPROT,
output wire [C_AXI_ARUSER_WIDTH-1:0] M_AXI_ARUSER,
output wire M_AXI_ARVALID,
input wire M_AXI_ARREADY,
// Master Interface Read Data Ports
input wire [C_AXI_ID_WIDTH-1:0] M_AXI_RID,
input wire [C_AXI_DATA_WIDTH-1:0] M_AXI_RDATA,
input wire [2-1:0] M_AXI_RRESP,
input wire M_AXI_RLAST,
input wire [C_AXI_RUSER_WIDTH-1:0] M_AXI_RUSER,
input wire M_AXI_RVALID,
output wire M_AXI_RREADY,
output wire ERROR_TRIGGER,
output wire [C_AXI_ID_WIDTH-1:0] ERROR_TRANSACTION_ID
);
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
localparam C_FIFO_DEPTH_LOG = 4;
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
// Internal reset.
reg ARESET;
// AW->W command queue signals.
wire cmd_w_valid;
wire cmd_w_check;
wire [C_AXI_ID_WIDTH-1:0] cmd_w_id;
wire cmd_w_ready;
// W->B command queue signals.
wire cmd_b_push;
wire cmd_b_error;
wire [C_AXI_ID_WIDTH-1:0] cmd_b_id;
wire cmd_b_full;
wire [C_FIFO_DEPTH_LOG-1:0] cmd_b_addr;
wire cmd_b_ready;
/////////////////////////////////////////////////////////////////////////////
// Handle Internal Reset
/////////////////////////////////////////////////////////////////////////////
always @ (posedge ACLK) begin
ARESET <= !ARESETN;
end
/////////////////////////////////////////////////////////////////////////////
// Handle Write Channels (AW/W/B)
/////////////////////////////////////////////////////////////////////////////
// Write Address Channel.
processing_system7_v5_5_aw_atc #
(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_ADDR_WIDTH (C_AXI_ADDR_WIDTH),
.C_AXI_AWUSER_WIDTH (C_AXI_AWUSER_WIDTH),
.C_FIFO_DEPTH_LOG (C_FIFO_DEPTH_LOG)
) write_addr_inst
(
// Global Signals
.ARESET (ARESET),
.ACLK (ACLK),
// Command Interface (Out)
.cmd_w_valid (cmd_w_valid),
.cmd_w_check (cmd_w_check),
.cmd_w_id (cmd_w_id),
.cmd_w_ready (cmd_w_ready),
.cmd_b_addr (cmd_b_addr),
.cmd_b_ready (cmd_b_ready),
// Slave Interface Write Address Ports
.S_AXI_AWID (S_AXI_AWID),
.S_AXI_AWADDR (S_AXI_AWADDR),
.S_AXI_AWLEN (S_AXI_AWLEN),
.S_AXI_AWSIZE (S_AXI_AWSIZE),
.S_AXI_AWBURST (S_AXI_AWBURST),
.S_AXI_AWLOCK (S_AXI_AWLOCK),
.S_AXI_AWCACHE (S_AXI_AWCACHE),
.S_AXI_AWPROT (S_AXI_AWPROT),
.S_AXI_AWUSER (S_AXI_AWUSER),
.S_AXI_AWVALID (S_AXI_AWVALID),
.S_AXI_AWREADY (S_AXI_AWREADY),
// Master Interface Write Address Port
.M_AXI_AWID (M_AXI_AWID),
.M_AXI_AWADDR (M_AXI_AWADDR),
.M_AXI_AWLEN (M_AXI_AWLEN),
.M_AXI_AWSIZE (M_AXI_AWSIZE),
.M_AXI_AWBURST (M_AXI_AWBURST),
.M_AXI_AWLOCK (M_AXI_AWLOCK),
.M_AXI_AWCACHE (M_AXI_AWCACHE),
.M_AXI_AWPROT (M_AXI_AWPROT),
.M_AXI_AWUSER (M_AXI_AWUSER),
.M_AXI_AWVALID (M_AXI_AWVALID),
.M_AXI_AWREADY (M_AXI_AWREADY)
);
// Write Data channel.
processing_system7_v5_5_w_atc #
(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_WUSER_WIDTH (C_AXI_WUSER_WIDTH)
) write_data_inst
(
// Global Signals
.ARESET (ARESET),
.ACLK (ACLK),
// Command Interface (In)
.cmd_w_valid (cmd_w_valid),
.cmd_w_check (cmd_w_check),
.cmd_w_id (cmd_w_id),
.cmd_w_ready (cmd_w_ready),
// Command Interface (Out)
.cmd_b_push (cmd_b_push),
.cmd_b_error (cmd_b_error),
.cmd_b_id (cmd_b_id),
.cmd_b_full (cmd_b_full),
// Slave Interface Write Data Ports
.S_AXI_WID (S_AXI_WID),
.S_AXI_WDATA (S_AXI_WDATA),
.S_AXI_WSTRB (S_AXI_WSTRB),
.S_AXI_WLAST (S_AXI_WLAST),
.S_AXI_WUSER (S_AXI_WUSER),
.S_AXI_WVALID (S_AXI_WVALID),
.S_AXI_WREADY (S_AXI_WREADY),
// Master Interface Write Data Ports
.M_AXI_WID (M_AXI_WID),
.M_AXI_WDATA (M_AXI_WDATA),
.M_AXI_WSTRB (M_AXI_WSTRB),
.M_AXI_WLAST (M_AXI_WLAST),
.M_AXI_WUSER (M_AXI_WUSER),
.M_AXI_WVALID (M_AXI_WVALID),
.M_AXI_WREADY (M_AXI_WREADY)
);
// Write Response channel.
processing_system7_v5_5_b_atc #
(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_BUSER_WIDTH (C_AXI_BUSER_WIDTH),
.C_FIFO_DEPTH_LOG (C_FIFO_DEPTH_LOG)
) write_response_inst
(
// Global Signals
.ARESET (ARESET),
.ACLK (ACLK),
// Command Interface (In)
.cmd_b_push (cmd_b_push),
.cmd_b_error (cmd_b_error),
.cmd_b_id (cmd_b_id),
.cmd_b_full (cmd_b_full),
.cmd_b_addr (cmd_b_addr),
.cmd_b_ready (cmd_b_ready),
// Slave Interface Write Response Ports
.S_AXI_BID (S_AXI_BID),
.S_AXI_BRESP (S_AXI_BRESP),
.S_AXI_BUSER (S_AXI_BUSER),
.S_AXI_BVALID (S_AXI_BVALID),
.S_AXI_BREADY (S_AXI_BREADY),
// Master Interface Write Response Ports
.M_AXI_BID (M_AXI_BID),
.M_AXI_BRESP (M_AXI_BRESP),
.M_AXI_BUSER (M_AXI_BUSER),
.M_AXI_BVALID (M_AXI_BVALID),
.M_AXI_BREADY (M_AXI_BREADY),
// Trigger detection
.ERROR_TRIGGER (ERROR_TRIGGER),
.ERROR_TRANSACTION_ID (ERROR_TRANSACTION_ID)
);
/////////////////////////////////////////////////////////////////////////////
// Handle Read Channels (AR/R)
/////////////////////////////////////////////////////////////////////////////
// Read Address Port
assign M_AXI_ARID = S_AXI_ARID;
assign M_AXI_ARADDR = S_AXI_ARADDR;
assign M_AXI_ARLEN = S_AXI_ARLEN;
assign M_AXI_ARSIZE = S_AXI_ARSIZE;
assign M_AXI_ARBURST = S_AXI_ARBURST;
assign M_AXI_ARLOCK = S_AXI_ARLOCK;
assign M_AXI_ARCACHE = S_AXI_ARCACHE;
assign M_AXI_ARPROT = S_AXI_ARPROT;
assign M_AXI_ARUSER = S_AXI_ARUSER;
assign M_AXI_ARVALID = S_AXI_ARVALID;
assign S_AXI_ARREADY = M_AXI_ARREADY;
// Read Data Port
assign S_AXI_RID = M_AXI_RID;
assign S_AXI_RDATA = M_AXI_RDATA;
assign S_AXI_RRESP = M_AXI_RRESP;
assign S_AXI_RLAST = M_AXI_RLAST;
assign S_AXI_RUSER = M_AXI_RUSER;
assign S_AXI_RVALID = M_AXI_RVALID;
assign M_AXI_RREADY = S_AXI_RREADY;
endmodule
`default_nettype wire
|
//-----------------------------------------------------------------------------
//-- (c) Copyright 2010 Xilinx, Inc. All rights reserved.
//--
//-- This file contains confidential and proprietary information
//-- of Xilinx, Inc. and is protected under U.S. and
//-- international copyright and other intellectual property
//-- laws.
//--
//-- DISCLAIMER
//-- This disclaimer is not a license and does not grant any
//-- rights to the materials distributed herewith. Except as
//-- otherwise provided in a valid license issued to you by
//-- Xilinx, and to the maximum extent permitted by applicable
//-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
//-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
//-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
//-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
//-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
//-- (2) Xilinx shall not be liable (whether in contract or tort,
//-- including negligence, or under any other theory of
//-- liability) for any loss or damage of any kind or nature
//-- related to, arising under or in connection with these
//-- materials, including for any direct, or any indirect,
//-- special, incidental, or consequential loss or damage
//-- (including loss of data, profits, goodwill, or any type of
//-- loss or damage suffered as a result of any action brought
//-- by a third party) even if such damage or loss was
//-- reasonably foreseeable or Xilinx had been advised of the
//-- possibility of the same.
//--
//-- CRITICAL APPLICATIONS
//-- Xilinx products are not designed or intended to be fail-
//-- safe, or for use in any application requiring fail-safe
//-- performance, such as life-support or safety devices or
//-- systems, Class III medical devices, nuclear facilities,
//-- applications related to the deployment of airbags, or any
//-- other applications that could lead to death, personal
//-- injury, or severe property or environmental damage
//-- (individually and collectively, "Critical
//-- Applications"). Customer assumes the sole risk and
//-- liability of any use of Xilinx products in Critical
//-- Applications, subject only to applicable laws and
//-- regulations governing limitations on product liability.
//--
//-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
//-- PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
//
// Description: ACP Transaction Checker
//
// Check for optimized ACP transactions and flag if they are broken.
//
//
//
// Verilog-standard: Verilog 2001
//--------------------------------------------------------------------------
//
// Structure:
// atc
// aw_atc
// w_atc
// b_atc
//
//--------------------------------------------------------------------------
`timescale 1ps/1ps
`default_nettype none
module processing_system7_v5_5_atc #
(
parameter C_FAMILY = "rtl",
// FPGA Family. Current version: virtex6, spartan6 or later.
parameter integer C_AXI_ID_WIDTH = 4,
// Width of all ID signals on SI and MI side of checker.
// Range: >= 1.
parameter integer C_AXI_ADDR_WIDTH = 32,
// Width of all ADDR signals on SI and MI side of checker.
// Range: 32.
parameter integer C_AXI_DATA_WIDTH = 64,
// Width of all DATA signals on SI and MI side of checker.
// Range: 64.
parameter integer C_AXI_AWUSER_WIDTH = 1,
// Width of AWUSER signals.
// Range: >= 1.
parameter integer C_AXI_ARUSER_WIDTH = 1,
// Width of ARUSER signals.
// Range: >= 1.
parameter integer C_AXI_WUSER_WIDTH = 1,
// Width of WUSER signals.
// Range: >= 1.
parameter integer C_AXI_RUSER_WIDTH = 1,
// Width of RUSER signals.
// Range: >= 1.
parameter integer C_AXI_BUSER_WIDTH = 1
// Width of BUSER signals.
// Range: >= 1.
)
(
// Global Signals
input wire ACLK,
input wire ARESETN,
// Slave Interface Write Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_AWID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_AWADDR,
input wire [4-1:0] S_AXI_AWLEN,
input wire [3-1:0] S_AXI_AWSIZE,
input wire [2-1:0] S_AXI_AWBURST,
input wire [2-1:0] S_AXI_AWLOCK,
input wire [4-1:0] S_AXI_AWCACHE,
input wire [3-1:0] S_AXI_AWPROT,
input wire [C_AXI_AWUSER_WIDTH-1:0] S_AXI_AWUSER,
input wire S_AXI_AWVALID,
output wire S_AXI_AWREADY,
// Slave Interface Write Data Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_WID,
input wire [C_AXI_DATA_WIDTH-1:0] S_AXI_WDATA,
input wire [C_AXI_DATA_WIDTH/8-1:0] S_AXI_WSTRB,
input wire S_AXI_WLAST,
input wire [C_AXI_WUSER_WIDTH-1:0] S_AXI_WUSER,
input wire S_AXI_WVALID,
output wire S_AXI_WREADY,
// Slave Interface Write Response Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_BID,
output wire [2-1:0] S_AXI_BRESP,
output wire [C_AXI_BUSER_WIDTH-1:0] S_AXI_BUSER,
output wire S_AXI_BVALID,
input wire S_AXI_BREADY,
// Slave Interface Read Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_ARID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_ARADDR,
input wire [4-1:0] S_AXI_ARLEN,
input wire [3-1:0] S_AXI_ARSIZE,
input wire [2-1:0] S_AXI_ARBURST,
input wire [2-1:0] S_AXI_ARLOCK,
input wire [4-1:0] S_AXI_ARCACHE,
input wire [3-1:0] S_AXI_ARPROT,
input wire [C_AXI_ARUSER_WIDTH-1:0] S_AXI_ARUSER,
input wire S_AXI_ARVALID,
output wire S_AXI_ARREADY,
// Slave Interface Read Data Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_RID,
output wire [C_AXI_DATA_WIDTH-1:0] S_AXI_RDATA,
output wire [2-1:0] S_AXI_RRESP,
output wire S_AXI_RLAST,
output wire [C_AXI_RUSER_WIDTH-1:0] S_AXI_RUSER,
output wire S_AXI_RVALID,
input wire S_AXI_RREADY,
// Master Interface Write Address Port
output wire [C_AXI_ID_WIDTH-1:0] M_AXI_AWID,
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_AWADDR,
output wire [4-1:0] M_AXI_AWLEN,
output wire [3-1:0] M_AXI_AWSIZE,
output wire [2-1:0] M_AXI_AWBURST,
output wire [2-1:0] M_AXI_AWLOCK,
output wire [4-1:0] M_AXI_AWCACHE,
output wire [3-1:0] M_AXI_AWPROT,
output wire [C_AXI_AWUSER_WIDTH-1:0] M_AXI_AWUSER,
output wire M_AXI_AWVALID,
input wire M_AXI_AWREADY,
// Master Interface Write Data Ports
output wire [C_AXI_ID_WIDTH-1:0] M_AXI_WID,
output wire [C_AXI_DATA_WIDTH-1:0] M_AXI_WDATA,
output wire [C_AXI_DATA_WIDTH/8-1:0] M_AXI_WSTRB,
output wire M_AXI_WLAST,
output wire [C_AXI_WUSER_WIDTH-1:0] M_AXI_WUSER,
output wire M_AXI_WVALID,
input wire M_AXI_WREADY,
// Master Interface Write Response Ports
input wire [C_AXI_ID_WIDTH-1:0] M_AXI_BID,
input wire [2-1:0] M_AXI_BRESP,
input wire [C_AXI_BUSER_WIDTH-1:0] M_AXI_BUSER,
input wire M_AXI_BVALID,
output wire M_AXI_BREADY,
// Master Interface Read Address Port
output wire [C_AXI_ID_WIDTH-1:0] M_AXI_ARID,
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_ARADDR,
output wire [4-1:0] M_AXI_ARLEN,
output wire [3-1:0] M_AXI_ARSIZE,
output wire [2-1:0] M_AXI_ARBURST,
output wire [2-1:0] M_AXI_ARLOCK,
output wire [4-1:0] M_AXI_ARCACHE,
output wire [3-1:0] M_AXI_ARPROT,
output wire [C_AXI_ARUSER_WIDTH-1:0] M_AXI_ARUSER,
output wire M_AXI_ARVALID,
input wire M_AXI_ARREADY,
// Master Interface Read Data Ports
input wire [C_AXI_ID_WIDTH-1:0] M_AXI_RID,
input wire [C_AXI_DATA_WIDTH-1:0] M_AXI_RDATA,
input wire [2-1:0] M_AXI_RRESP,
input wire M_AXI_RLAST,
input wire [C_AXI_RUSER_WIDTH-1:0] M_AXI_RUSER,
input wire M_AXI_RVALID,
output wire M_AXI_RREADY,
output wire ERROR_TRIGGER,
output wire [C_AXI_ID_WIDTH-1:0] ERROR_TRANSACTION_ID
);
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
localparam C_FIFO_DEPTH_LOG = 4;
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
// Internal reset.
reg ARESET;
// AW->W command queue signals.
wire cmd_w_valid;
wire cmd_w_check;
wire [C_AXI_ID_WIDTH-1:0] cmd_w_id;
wire cmd_w_ready;
// W->B command queue signals.
wire cmd_b_push;
wire cmd_b_error;
wire [C_AXI_ID_WIDTH-1:0] cmd_b_id;
wire cmd_b_full;
wire [C_FIFO_DEPTH_LOG-1:0] cmd_b_addr;
wire cmd_b_ready;
/////////////////////////////////////////////////////////////////////////////
// Handle Internal Reset
/////////////////////////////////////////////////////////////////////////////
always @ (posedge ACLK) begin
ARESET <= !ARESETN;
end
/////////////////////////////////////////////////////////////////////////////
// Handle Write Channels (AW/W/B)
/////////////////////////////////////////////////////////////////////////////
// Write Address Channel.
processing_system7_v5_5_aw_atc #
(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_ADDR_WIDTH (C_AXI_ADDR_WIDTH),
.C_AXI_AWUSER_WIDTH (C_AXI_AWUSER_WIDTH),
.C_FIFO_DEPTH_LOG (C_FIFO_DEPTH_LOG)
) write_addr_inst
(
// Global Signals
.ARESET (ARESET),
.ACLK (ACLK),
// Command Interface (Out)
.cmd_w_valid (cmd_w_valid),
.cmd_w_check (cmd_w_check),
.cmd_w_id (cmd_w_id),
.cmd_w_ready (cmd_w_ready),
.cmd_b_addr (cmd_b_addr),
.cmd_b_ready (cmd_b_ready),
// Slave Interface Write Address Ports
.S_AXI_AWID (S_AXI_AWID),
.S_AXI_AWADDR (S_AXI_AWADDR),
.S_AXI_AWLEN (S_AXI_AWLEN),
.S_AXI_AWSIZE (S_AXI_AWSIZE),
.S_AXI_AWBURST (S_AXI_AWBURST),
.S_AXI_AWLOCK (S_AXI_AWLOCK),
.S_AXI_AWCACHE (S_AXI_AWCACHE),
.S_AXI_AWPROT (S_AXI_AWPROT),
.S_AXI_AWUSER (S_AXI_AWUSER),
.S_AXI_AWVALID (S_AXI_AWVALID),
.S_AXI_AWREADY (S_AXI_AWREADY),
// Master Interface Write Address Port
.M_AXI_AWID (M_AXI_AWID),
.M_AXI_AWADDR (M_AXI_AWADDR),
.M_AXI_AWLEN (M_AXI_AWLEN),
.M_AXI_AWSIZE (M_AXI_AWSIZE),
.M_AXI_AWBURST (M_AXI_AWBURST),
.M_AXI_AWLOCK (M_AXI_AWLOCK),
.M_AXI_AWCACHE (M_AXI_AWCACHE),
.M_AXI_AWPROT (M_AXI_AWPROT),
.M_AXI_AWUSER (M_AXI_AWUSER),
.M_AXI_AWVALID (M_AXI_AWVALID),
.M_AXI_AWREADY (M_AXI_AWREADY)
);
// Write Data channel.
processing_system7_v5_5_w_atc #
(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_WUSER_WIDTH (C_AXI_WUSER_WIDTH)
) write_data_inst
(
// Global Signals
.ARESET (ARESET),
.ACLK (ACLK),
// Command Interface (In)
.cmd_w_valid (cmd_w_valid),
.cmd_w_check (cmd_w_check),
.cmd_w_id (cmd_w_id),
.cmd_w_ready (cmd_w_ready),
// Command Interface (Out)
.cmd_b_push (cmd_b_push),
.cmd_b_error (cmd_b_error),
.cmd_b_id (cmd_b_id),
.cmd_b_full (cmd_b_full),
// Slave Interface Write Data Ports
.S_AXI_WID (S_AXI_WID),
.S_AXI_WDATA (S_AXI_WDATA),
.S_AXI_WSTRB (S_AXI_WSTRB),
.S_AXI_WLAST (S_AXI_WLAST),
.S_AXI_WUSER (S_AXI_WUSER),
.S_AXI_WVALID (S_AXI_WVALID),
.S_AXI_WREADY (S_AXI_WREADY),
// Master Interface Write Data Ports
.M_AXI_WID (M_AXI_WID),
.M_AXI_WDATA (M_AXI_WDATA),
.M_AXI_WSTRB (M_AXI_WSTRB),
.M_AXI_WLAST (M_AXI_WLAST),
.M_AXI_WUSER (M_AXI_WUSER),
.M_AXI_WVALID (M_AXI_WVALID),
.M_AXI_WREADY (M_AXI_WREADY)
);
// Write Response channel.
processing_system7_v5_5_b_atc #
(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_BUSER_WIDTH (C_AXI_BUSER_WIDTH),
.C_FIFO_DEPTH_LOG (C_FIFO_DEPTH_LOG)
) write_response_inst
(
// Global Signals
.ARESET (ARESET),
.ACLK (ACLK),
// Command Interface (In)
.cmd_b_push (cmd_b_push),
.cmd_b_error (cmd_b_error),
.cmd_b_id (cmd_b_id),
.cmd_b_full (cmd_b_full),
.cmd_b_addr (cmd_b_addr),
.cmd_b_ready (cmd_b_ready),
// Slave Interface Write Response Ports
.S_AXI_BID (S_AXI_BID),
.S_AXI_BRESP (S_AXI_BRESP),
.S_AXI_BUSER (S_AXI_BUSER),
.S_AXI_BVALID (S_AXI_BVALID),
.S_AXI_BREADY (S_AXI_BREADY),
// Master Interface Write Response Ports
.M_AXI_BID (M_AXI_BID),
.M_AXI_BRESP (M_AXI_BRESP),
.M_AXI_BUSER (M_AXI_BUSER),
.M_AXI_BVALID (M_AXI_BVALID),
.M_AXI_BREADY (M_AXI_BREADY),
// Trigger detection
.ERROR_TRIGGER (ERROR_TRIGGER),
.ERROR_TRANSACTION_ID (ERROR_TRANSACTION_ID)
);
/////////////////////////////////////////////////////////////////////////////
// Handle Read Channels (AR/R)
/////////////////////////////////////////////////////////////////////////////
// Read Address Port
assign M_AXI_ARID = S_AXI_ARID;
assign M_AXI_ARADDR = S_AXI_ARADDR;
assign M_AXI_ARLEN = S_AXI_ARLEN;
assign M_AXI_ARSIZE = S_AXI_ARSIZE;
assign M_AXI_ARBURST = S_AXI_ARBURST;
assign M_AXI_ARLOCK = S_AXI_ARLOCK;
assign M_AXI_ARCACHE = S_AXI_ARCACHE;
assign M_AXI_ARPROT = S_AXI_ARPROT;
assign M_AXI_ARUSER = S_AXI_ARUSER;
assign M_AXI_ARVALID = S_AXI_ARVALID;
assign S_AXI_ARREADY = M_AXI_ARREADY;
// Read Data Port
assign S_AXI_RID = M_AXI_RID;
assign S_AXI_RDATA = M_AXI_RDATA;
assign S_AXI_RRESP = M_AXI_RRESP;
assign S_AXI_RLAST = M_AXI_RLAST;
assign S_AXI_RUSER = M_AXI_RUSER;
assign S_AXI_RVALID = M_AXI_RVALID;
assign M_AXI_RREADY = S_AXI_RREADY;
endmodule
`default_nettype wire
|
//-----------------------------------------------------------------------------
//-- (c) Copyright 2010 Xilinx, Inc. All rights reserved.
//--
//-- This file contains confidential and proprietary information
//-- of Xilinx, Inc. and is protected under U.S. and
//-- international copyright and other intellectual property
//-- laws.
//--
//-- DISCLAIMER
//-- This disclaimer is not a license and does not grant any
//-- rights to the materials distributed herewith. Except as
//-- otherwise provided in a valid license issued to you by
//-- Xilinx, and to the maximum extent permitted by applicable
//-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
//-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
//-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
//-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
//-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
//-- (2) Xilinx shall not be liable (whether in contract or tort,
//-- including negligence, or under any other theory of
//-- liability) for any loss or damage of any kind or nature
//-- related to, arising under or in connection with these
//-- materials, including for any direct, or any indirect,
//-- special, incidental, or consequential loss or damage
//-- (including loss of data, profits, goodwill, or any type of
//-- loss or damage suffered as a result of any action brought
//-- by a third party) even if such damage or loss was
//-- reasonably foreseeable or Xilinx had been advised of the
//-- possibility of the same.
//--
//-- CRITICAL APPLICATIONS
//-- Xilinx products are not designed or intended to be fail-
//-- safe, or for use in any application requiring fail-safe
//-- performance, such as life-support or safety devices or
//-- systems, Class III medical devices, nuclear facilities,
//-- applications related to the deployment of airbags, or any
//-- other applications that could lead to death, personal
//-- injury, or severe property or environmental damage
//-- (individually and collectively, "Critical
//-- Applications"). Customer assumes the sole risk and
//-- liability of any use of Xilinx products in Critical
//-- Applications, subject only to applicable laws and
//-- regulations governing limitations on product liability.
//--
//-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
//-- PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
//
// Description: ACP Transaction Checker
//
// Check for optimized ACP transactions and flag if they are broken.
//
//
//
// Verilog-standard: Verilog 2001
//--------------------------------------------------------------------------
//
// Structure:
// atc
// aw_atc
// w_atc
// b_atc
//
//--------------------------------------------------------------------------
`timescale 1ps/1ps
`default_nettype none
module processing_system7_v5_5_atc #
(
parameter C_FAMILY = "rtl",
// FPGA Family. Current version: virtex6, spartan6 or later.
parameter integer C_AXI_ID_WIDTH = 4,
// Width of all ID signals on SI and MI side of checker.
// Range: >= 1.
parameter integer C_AXI_ADDR_WIDTH = 32,
// Width of all ADDR signals on SI and MI side of checker.
// Range: 32.
parameter integer C_AXI_DATA_WIDTH = 64,
// Width of all DATA signals on SI and MI side of checker.
// Range: 64.
parameter integer C_AXI_AWUSER_WIDTH = 1,
// Width of AWUSER signals.
// Range: >= 1.
parameter integer C_AXI_ARUSER_WIDTH = 1,
// Width of ARUSER signals.
// Range: >= 1.
parameter integer C_AXI_WUSER_WIDTH = 1,
// Width of WUSER signals.
// Range: >= 1.
parameter integer C_AXI_RUSER_WIDTH = 1,
// Width of RUSER signals.
// Range: >= 1.
parameter integer C_AXI_BUSER_WIDTH = 1
// Width of BUSER signals.
// Range: >= 1.
)
(
// Global Signals
input wire ACLK,
input wire ARESETN,
// Slave Interface Write Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_AWID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_AWADDR,
input wire [4-1:0] S_AXI_AWLEN,
input wire [3-1:0] S_AXI_AWSIZE,
input wire [2-1:0] S_AXI_AWBURST,
input wire [2-1:0] S_AXI_AWLOCK,
input wire [4-1:0] S_AXI_AWCACHE,
input wire [3-1:0] S_AXI_AWPROT,
input wire [C_AXI_AWUSER_WIDTH-1:0] S_AXI_AWUSER,
input wire S_AXI_AWVALID,
output wire S_AXI_AWREADY,
// Slave Interface Write Data Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_WID,
input wire [C_AXI_DATA_WIDTH-1:0] S_AXI_WDATA,
input wire [C_AXI_DATA_WIDTH/8-1:0] S_AXI_WSTRB,
input wire S_AXI_WLAST,
input wire [C_AXI_WUSER_WIDTH-1:0] S_AXI_WUSER,
input wire S_AXI_WVALID,
output wire S_AXI_WREADY,
// Slave Interface Write Response Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_BID,
output wire [2-1:0] S_AXI_BRESP,
output wire [C_AXI_BUSER_WIDTH-1:0] S_AXI_BUSER,
output wire S_AXI_BVALID,
input wire S_AXI_BREADY,
// Slave Interface Read Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_ARID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_ARADDR,
input wire [4-1:0] S_AXI_ARLEN,
input wire [3-1:0] S_AXI_ARSIZE,
input wire [2-1:0] S_AXI_ARBURST,
input wire [2-1:0] S_AXI_ARLOCK,
input wire [4-1:0] S_AXI_ARCACHE,
input wire [3-1:0] S_AXI_ARPROT,
input wire [C_AXI_ARUSER_WIDTH-1:0] S_AXI_ARUSER,
input wire S_AXI_ARVALID,
output wire S_AXI_ARREADY,
// Slave Interface Read Data Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_RID,
output wire [C_AXI_DATA_WIDTH-1:0] S_AXI_RDATA,
output wire [2-1:0] S_AXI_RRESP,
output wire S_AXI_RLAST,
output wire [C_AXI_RUSER_WIDTH-1:0] S_AXI_RUSER,
output wire S_AXI_RVALID,
input wire S_AXI_RREADY,
// Master Interface Write Address Port
output wire [C_AXI_ID_WIDTH-1:0] M_AXI_AWID,
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_AWADDR,
output wire [4-1:0] M_AXI_AWLEN,
output wire [3-1:0] M_AXI_AWSIZE,
output wire [2-1:0] M_AXI_AWBURST,
output wire [2-1:0] M_AXI_AWLOCK,
output wire [4-1:0] M_AXI_AWCACHE,
output wire [3-1:0] M_AXI_AWPROT,
output wire [C_AXI_AWUSER_WIDTH-1:0] M_AXI_AWUSER,
output wire M_AXI_AWVALID,
input wire M_AXI_AWREADY,
// Master Interface Write Data Ports
output wire [C_AXI_ID_WIDTH-1:0] M_AXI_WID,
output wire [C_AXI_DATA_WIDTH-1:0] M_AXI_WDATA,
output wire [C_AXI_DATA_WIDTH/8-1:0] M_AXI_WSTRB,
output wire M_AXI_WLAST,
output wire [C_AXI_WUSER_WIDTH-1:0] M_AXI_WUSER,
output wire M_AXI_WVALID,
input wire M_AXI_WREADY,
// Master Interface Write Response Ports
input wire [C_AXI_ID_WIDTH-1:0] M_AXI_BID,
input wire [2-1:0] M_AXI_BRESP,
input wire [C_AXI_BUSER_WIDTH-1:0] M_AXI_BUSER,
input wire M_AXI_BVALID,
output wire M_AXI_BREADY,
// Master Interface Read Address Port
output wire [C_AXI_ID_WIDTH-1:0] M_AXI_ARID,
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_ARADDR,
output wire [4-1:0] M_AXI_ARLEN,
output wire [3-1:0] M_AXI_ARSIZE,
output wire [2-1:0] M_AXI_ARBURST,
output wire [2-1:0] M_AXI_ARLOCK,
output wire [4-1:0] M_AXI_ARCACHE,
output wire [3-1:0] M_AXI_ARPROT,
output wire [C_AXI_ARUSER_WIDTH-1:0] M_AXI_ARUSER,
output wire M_AXI_ARVALID,
input wire M_AXI_ARREADY,
// Master Interface Read Data Ports
input wire [C_AXI_ID_WIDTH-1:0] M_AXI_RID,
input wire [C_AXI_DATA_WIDTH-1:0] M_AXI_RDATA,
input wire [2-1:0] M_AXI_RRESP,
input wire M_AXI_RLAST,
input wire [C_AXI_RUSER_WIDTH-1:0] M_AXI_RUSER,
input wire M_AXI_RVALID,
output wire M_AXI_RREADY,
output wire ERROR_TRIGGER,
output wire [C_AXI_ID_WIDTH-1:0] ERROR_TRANSACTION_ID
);
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
localparam C_FIFO_DEPTH_LOG = 4;
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
// Internal reset.
reg ARESET;
// AW->W command queue signals.
wire cmd_w_valid;
wire cmd_w_check;
wire [C_AXI_ID_WIDTH-1:0] cmd_w_id;
wire cmd_w_ready;
// W->B command queue signals.
wire cmd_b_push;
wire cmd_b_error;
wire [C_AXI_ID_WIDTH-1:0] cmd_b_id;
wire cmd_b_full;
wire [C_FIFO_DEPTH_LOG-1:0] cmd_b_addr;
wire cmd_b_ready;
/////////////////////////////////////////////////////////////////////////////
// Handle Internal Reset
/////////////////////////////////////////////////////////////////////////////
always @ (posedge ACLK) begin
ARESET <= !ARESETN;
end
/////////////////////////////////////////////////////////////////////////////
// Handle Write Channels (AW/W/B)
/////////////////////////////////////////////////////////////////////////////
// Write Address Channel.
processing_system7_v5_5_aw_atc #
(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_ADDR_WIDTH (C_AXI_ADDR_WIDTH),
.C_AXI_AWUSER_WIDTH (C_AXI_AWUSER_WIDTH),
.C_FIFO_DEPTH_LOG (C_FIFO_DEPTH_LOG)
) write_addr_inst
(
// Global Signals
.ARESET (ARESET),
.ACLK (ACLK),
// Command Interface (Out)
.cmd_w_valid (cmd_w_valid),
.cmd_w_check (cmd_w_check),
.cmd_w_id (cmd_w_id),
.cmd_w_ready (cmd_w_ready),
.cmd_b_addr (cmd_b_addr),
.cmd_b_ready (cmd_b_ready),
// Slave Interface Write Address Ports
.S_AXI_AWID (S_AXI_AWID),
.S_AXI_AWADDR (S_AXI_AWADDR),
.S_AXI_AWLEN (S_AXI_AWLEN),
.S_AXI_AWSIZE (S_AXI_AWSIZE),
.S_AXI_AWBURST (S_AXI_AWBURST),
.S_AXI_AWLOCK (S_AXI_AWLOCK),
.S_AXI_AWCACHE (S_AXI_AWCACHE),
.S_AXI_AWPROT (S_AXI_AWPROT),
.S_AXI_AWUSER (S_AXI_AWUSER),
.S_AXI_AWVALID (S_AXI_AWVALID),
.S_AXI_AWREADY (S_AXI_AWREADY),
// Master Interface Write Address Port
.M_AXI_AWID (M_AXI_AWID),
.M_AXI_AWADDR (M_AXI_AWADDR),
.M_AXI_AWLEN (M_AXI_AWLEN),
.M_AXI_AWSIZE (M_AXI_AWSIZE),
.M_AXI_AWBURST (M_AXI_AWBURST),
.M_AXI_AWLOCK (M_AXI_AWLOCK),
.M_AXI_AWCACHE (M_AXI_AWCACHE),
.M_AXI_AWPROT (M_AXI_AWPROT),
.M_AXI_AWUSER (M_AXI_AWUSER),
.M_AXI_AWVALID (M_AXI_AWVALID),
.M_AXI_AWREADY (M_AXI_AWREADY)
);
// Write Data channel.
processing_system7_v5_5_w_atc #
(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_WUSER_WIDTH (C_AXI_WUSER_WIDTH)
) write_data_inst
(
// Global Signals
.ARESET (ARESET),
.ACLK (ACLK),
// Command Interface (In)
.cmd_w_valid (cmd_w_valid),
.cmd_w_check (cmd_w_check),
.cmd_w_id (cmd_w_id),
.cmd_w_ready (cmd_w_ready),
// Command Interface (Out)
.cmd_b_push (cmd_b_push),
.cmd_b_error (cmd_b_error),
.cmd_b_id (cmd_b_id),
.cmd_b_full (cmd_b_full),
// Slave Interface Write Data Ports
.S_AXI_WID (S_AXI_WID),
.S_AXI_WDATA (S_AXI_WDATA),
.S_AXI_WSTRB (S_AXI_WSTRB),
.S_AXI_WLAST (S_AXI_WLAST),
.S_AXI_WUSER (S_AXI_WUSER),
.S_AXI_WVALID (S_AXI_WVALID),
.S_AXI_WREADY (S_AXI_WREADY),
// Master Interface Write Data Ports
.M_AXI_WID (M_AXI_WID),
.M_AXI_WDATA (M_AXI_WDATA),
.M_AXI_WSTRB (M_AXI_WSTRB),
.M_AXI_WLAST (M_AXI_WLAST),
.M_AXI_WUSER (M_AXI_WUSER),
.M_AXI_WVALID (M_AXI_WVALID),
.M_AXI_WREADY (M_AXI_WREADY)
);
// Write Response channel.
processing_system7_v5_5_b_atc #
(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_BUSER_WIDTH (C_AXI_BUSER_WIDTH),
.C_FIFO_DEPTH_LOG (C_FIFO_DEPTH_LOG)
) write_response_inst
(
// Global Signals
.ARESET (ARESET),
.ACLK (ACLK),
// Command Interface (In)
.cmd_b_push (cmd_b_push),
.cmd_b_error (cmd_b_error),
.cmd_b_id (cmd_b_id),
.cmd_b_full (cmd_b_full),
.cmd_b_addr (cmd_b_addr),
.cmd_b_ready (cmd_b_ready),
// Slave Interface Write Response Ports
.S_AXI_BID (S_AXI_BID),
.S_AXI_BRESP (S_AXI_BRESP),
.S_AXI_BUSER (S_AXI_BUSER),
.S_AXI_BVALID (S_AXI_BVALID),
.S_AXI_BREADY (S_AXI_BREADY),
// Master Interface Write Response Ports
.M_AXI_BID (M_AXI_BID),
.M_AXI_BRESP (M_AXI_BRESP),
.M_AXI_BUSER (M_AXI_BUSER),
.M_AXI_BVALID (M_AXI_BVALID),
.M_AXI_BREADY (M_AXI_BREADY),
// Trigger detection
.ERROR_TRIGGER (ERROR_TRIGGER),
.ERROR_TRANSACTION_ID (ERROR_TRANSACTION_ID)
);
/////////////////////////////////////////////////////////////////////////////
// Handle Read Channels (AR/R)
/////////////////////////////////////////////////////////////////////////////
// Read Address Port
assign M_AXI_ARID = S_AXI_ARID;
assign M_AXI_ARADDR = S_AXI_ARADDR;
assign M_AXI_ARLEN = S_AXI_ARLEN;
assign M_AXI_ARSIZE = S_AXI_ARSIZE;
assign M_AXI_ARBURST = S_AXI_ARBURST;
assign M_AXI_ARLOCK = S_AXI_ARLOCK;
assign M_AXI_ARCACHE = S_AXI_ARCACHE;
assign M_AXI_ARPROT = S_AXI_ARPROT;
assign M_AXI_ARUSER = S_AXI_ARUSER;
assign M_AXI_ARVALID = S_AXI_ARVALID;
assign S_AXI_ARREADY = M_AXI_ARREADY;
// Read Data Port
assign S_AXI_RID = M_AXI_RID;
assign S_AXI_RDATA = M_AXI_RDATA;
assign S_AXI_RRESP = M_AXI_RRESP;
assign S_AXI_RLAST = M_AXI_RLAST;
assign S_AXI_RUSER = M_AXI_RUSER;
assign S_AXI_RVALID = M_AXI_RVALID;
assign M_AXI_RREADY = S_AXI_RREADY;
endmodule
`default_nettype wire
|
//-----------------------------------------------------------------------------
//-- (c) Copyright 2010 Xilinx, Inc. All rights reserved.
//--
//-- This file contains confidential and proprietary information
//-- of Xilinx, Inc. and is protected under U.S. and
//-- international copyright and other intellectual property
//-- laws.
//--
//-- DISCLAIMER
//-- This disclaimer is not a license and does not grant any
//-- rights to the materials distributed herewith. Except as
//-- otherwise provided in a valid license issued to you by
//-- Xilinx, and to the maximum extent permitted by applicable
//-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
//-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
//-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
//-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
//-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
//-- (2) Xilinx shall not be liable (whether in contract or tort,
//-- including negligence, or under any other theory of
//-- liability) for any loss or damage of any kind or nature
//-- related to, arising under or in connection with these
//-- materials, including for any direct, or any indirect,
//-- special, incidental, or consequential loss or damage
//-- (including loss of data, profits, goodwill, or any type of
//-- loss or damage suffered as a result of any action brought
//-- by a third party) even if such damage or loss was
//-- reasonably foreseeable or Xilinx had been advised of the
//-- possibility of the same.
//--
//-- CRITICAL APPLICATIONS
//-- Xilinx products are not designed or intended to be fail-
//-- safe, or for use in any application requiring fail-safe
//-- performance, such as life-support or safety devices or
//-- systems, Class III medical devices, nuclear facilities,
//-- applications related to the deployment of airbags, or any
//-- other applications that could lead to death, personal
//-- injury, or severe property or environmental damage
//-- (individually and collectively, "Critical
//-- Applications"). Customer assumes the sole risk and
//-- liability of any use of Xilinx products in Critical
//-- Applications, subject only to applicable laws and
//-- regulations governing limitations on product liability.
//--
//-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
//-- PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
//
// Description: ACP Transaction Checker
//
// Check for optimized ACP transactions and flag if they are broken.
//
//
//
// Verilog-standard: Verilog 2001
//--------------------------------------------------------------------------
//
// Structure:
// atc
// aw_atc
// w_atc
// b_atc
//
//--------------------------------------------------------------------------
`timescale 1ps/1ps
`default_nettype none
module processing_system7_v5_5_atc #
(
parameter C_FAMILY = "rtl",
// FPGA Family. Current version: virtex6, spartan6 or later.
parameter integer C_AXI_ID_WIDTH = 4,
// Width of all ID signals on SI and MI side of checker.
// Range: >= 1.
parameter integer C_AXI_ADDR_WIDTH = 32,
// Width of all ADDR signals on SI and MI side of checker.
// Range: 32.
parameter integer C_AXI_DATA_WIDTH = 64,
// Width of all DATA signals on SI and MI side of checker.
// Range: 64.
parameter integer C_AXI_AWUSER_WIDTH = 1,
// Width of AWUSER signals.
// Range: >= 1.
parameter integer C_AXI_ARUSER_WIDTH = 1,
// Width of ARUSER signals.
// Range: >= 1.
parameter integer C_AXI_WUSER_WIDTH = 1,
// Width of WUSER signals.
// Range: >= 1.
parameter integer C_AXI_RUSER_WIDTH = 1,
// Width of RUSER signals.
// Range: >= 1.
parameter integer C_AXI_BUSER_WIDTH = 1
// Width of BUSER signals.
// Range: >= 1.
)
(
// Global Signals
input wire ACLK,
input wire ARESETN,
// Slave Interface Write Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_AWID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_AWADDR,
input wire [4-1:0] S_AXI_AWLEN,
input wire [3-1:0] S_AXI_AWSIZE,
input wire [2-1:0] S_AXI_AWBURST,
input wire [2-1:0] S_AXI_AWLOCK,
input wire [4-1:0] S_AXI_AWCACHE,
input wire [3-1:0] S_AXI_AWPROT,
input wire [C_AXI_AWUSER_WIDTH-1:0] S_AXI_AWUSER,
input wire S_AXI_AWVALID,
output wire S_AXI_AWREADY,
// Slave Interface Write Data Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_WID,
input wire [C_AXI_DATA_WIDTH-1:0] S_AXI_WDATA,
input wire [C_AXI_DATA_WIDTH/8-1:0] S_AXI_WSTRB,
input wire S_AXI_WLAST,
input wire [C_AXI_WUSER_WIDTH-1:0] S_AXI_WUSER,
input wire S_AXI_WVALID,
output wire S_AXI_WREADY,
// Slave Interface Write Response Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_BID,
output wire [2-1:0] S_AXI_BRESP,
output wire [C_AXI_BUSER_WIDTH-1:0] S_AXI_BUSER,
output wire S_AXI_BVALID,
input wire S_AXI_BREADY,
// Slave Interface Read Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_ARID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_ARADDR,
input wire [4-1:0] S_AXI_ARLEN,
input wire [3-1:0] S_AXI_ARSIZE,
input wire [2-1:0] S_AXI_ARBURST,
input wire [2-1:0] S_AXI_ARLOCK,
input wire [4-1:0] S_AXI_ARCACHE,
input wire [3-1:0] S_AXI_ARPROT,
input wire [C_AXI_ARUSER_WIDTH-1:0] S_AXI_ARUSER,
input wire S_AXI_ARVALID,
output wire S_AXI_ARREADY,
// Slave Interface Read Data Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_RID,
output wire [C_AXI_DATA_WIDTH-1:0] S_AXI_RDATA,
output wire [2-1:0] S_AXI_RRESP,
output wire S_AXI_RLAST,
output wire [C_AXI_RUSER_WIDTH-1:0] S_AXI_RUSER,
output wire S_AXI_RVALID,
input wire S_AXI_RREADY,
// Master Interface Write Address Port
output wire [C_AXI_ID_WIDTH-1:0] M_AXI_AWID,
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_AWADDR,
output wire [4-1:0] M_AXI_AWLEN,
output wire [3-1:0] M_AXI_AWSIZE,
output wire [2-1:0] M_AXI_AWBURST,
output wire [2-1:0] M_AXI_AWLOCK,
output wire [4-1:0] M_AXI_AWCACHE,
output wire [3-1:0] M_AXI_AWPROT,
output wire [C_AXI_AWUSER_WIDTH-1:0] M_AXI_AWUSER,
output wire M_AXI_AWVALID,
input wire M_AXI_AWREADY,
// Master Interface Write Data Ports
output wire [C_AXI_ID_WIDTH-1:0] M_AXI_WID,
output wire [C_AXI_DATA_WIDTH-1:0] M_AXI_WDATA,
output wire [C_AXI_DATA_WIDTH/8-1:0] M_AXI_WSTRB,
output wire M_AXI_WLAST,
output wire [C_AXI_WUSER_WIDTH-1:0] M_AXI_WUSER,
output wire M_AXI_WVALID,
input wire M_AXI_WREADY,
// Master Interface Write Response Ports
input wire [C_AXI_ID_WIDTH-1:0] M_AXI_BID,
input wire [2-1:0] M_AXI_BRESP,
input wire [C_AXI_BUSER_WIDTH-1:0] M_AXI_BUSER,
input wire M_AXI_BVALID,
output wire M_AXI_BREADY,
// Master Interface Read Address Port
output wire [C_AXI_ID_WIDTH-1:0] M_AXI_ARID,
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_ARADDR,
output wire [4-1:0] M_AXI_ARLEN,
output wire [3-1:0] M_AXI_ARSIZE,
output wire [2-1:0] M_AXI_ARBURST,
output wire [2-1:0] M_AXI_ARLOCK,
output wire [4-1:0] M_AXI_ARCACHE,
output wire [3-1:0] M_AXI_ARPROT,
output wire [C_AXI_ARUSER_WIDTH-1:0] M_AXI_ARUSER,
output wire M_AXI_ARVALID,
input wire M_AXI_ARREADY,
// Master Interface Read Data Ports
input wire [C_AXI_ID_WIDTH-1:0] M_AXI_RID,
input wire [C_AXI_DATA_WIDTH-1:0] M_AXI_RDATA,
input wire [2-1:0] M_AXI_RRESP,
input wire M_AXI_RLAST,
input wire [C_AXI_RUSER_WIDTH-1:0] M_AXI_RUSER,
input wire M_AXI_RVALID,
output wire M_AXI_RREADY,
output wire ERROR_TRIGGER,
output wire [C_AXI_ID_WIDTH-1:0] ERROR_TRANSACTION_ID
);
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
localparam C_FIFO_DEPTH_LOG = 4;
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
// Internal reset.
reg ARESET;
// AW->W command queue signals.
wire cmd_w_valid;
wire cmd_w_check;
wire [C_AXI_ID_WIDTH-1:0] cmd_w_id;
wire cmd_w_ready;
// W->B command queue signals.
wire cmd_b_push;
wire cmd_b_error;
wire [C_AXI_ID_WIDTH-1:0] cmd_b_id;
wire cmd_b_full;
wire [C_FIFO_DEPTH_LOG-1:0] cmd_b_addr;
wire cmd_b_ready;
/////////////////////////////////////////////////////////////////////////////
// Handle Internal Reset
/////////////////////////////////////////////////////////////////////////////
always @ (posedge ACLK) begin
ARESET <= !ARESETN;
end
/////////////////////////////////////////////////////////////////////////////
// Handle Write Channels (AW/W/B)
/////////////////////////////////////////////////////////////////////////////
// Write Address Channel.
processing_system7_v5_5_aw_atc #
(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_ADDR_WIDTH (C_AXI_ADDR_WIDTH),
.C_AXI_AWUSER_WIDTH (C_AXI_AWUSER_WIDTH),
.C_FIFO_DEPTH_LOG (C_FIFO_DEPTH_LOG)
) write_addr_inst
(
// Global Signals
.ARESET (ARESET),
.ACLK (ACLK),
// Command Interface (Out)
.cmd_w_valid (cmd_w_valid),
.cmd_w_check (cmd_w_check),
.cmd_w_id (cmd_w_id),
.cmd_w_ready (cmd_w_ready),
.cmd_b_addr (cmd_b_addr),
.cmd_b_ready (cmd_b_ready),
// Slave Interface Write Address Ports
.S_AXI_AWID (S_AXI_AWID),
.S_AXI_AWADDR (S_AXI_AWADDR),
.S_AXI_AWLEN (S_AXI_AWLEN),
.S_AXI_AWSIZE (S_AXI_AWSIZE),
.S_AXI_AWBURST (S_AXI_AWBURST),
.S_AXI_AWLOCK (S_AXI_AWLOCK),
.S_AXI_AWCACHE (S_AXI_AWCACHE),
.S_AXI_AWPROT (S_AXI_AWPROT),
.S_AXI_AWUSER (S_AXI_AWUSER),
.S_AXI_AWVALID (S_AXI_AWVALID),
.S_AXI_AWREADY (S_AXI_AWREADY),
// Master Interface Write Address Port
.M_AXI_AWID (M_AXI_AWID),
.M_AXI_AWADDR (M_AXI_AWADDR),
.M_AXI_AWLEN (M_AXI_AWLEN),
.M_AXI_AWSIZE (M_AXI_AWSIZE),
.M_AXI_AWBURST (M_AXI_AWBURST),
.M_AXI_AWLOCK (M_AXI_AWLOCK),
.M_AXI_AWCACHE (M_AXI_AWCACHE),
.M_AXI_AWPROT (M_AXI_AWPROT),
.M_AXI_AWUSER (M_AXI_AWUSER),
.M_AXI_AWVALID (M_AXI_AWVALID),
.M_AXI_AWREADY (M_AXI_AWREADY)
);
// Write Data channel.
processing_system7_v5_5_w_atc #
(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_WUSER_WIDTH (C_AXI_WUSER_WIDTH)
) write_data_inst
(
// Global Signals
.ARESET (ARESET),
.ACLK (ACLK),
// Command Interface (In)
.cmd_w_valid (cmd_w_valid),
.cmd_w_check (cmd_w_check),
.cmd_w_id (cmd_w_id),
.cmd_w_ready (cmd_w_ready),
// Command Interface (Out)
.cmd_b_push (cmd_b_push),
.cmd_b_error (cmd_b_error),
.cmd_b_id (cmd_b_id),
.cmd_b_full (cmd_b_full),
// Slave Interface Write Data Ports
.S_AXI_WID (S_AXI_WID),
.S_AXI_WDATA (S_AXI_WDATA),
.S_AXI_WSTRB (S_AXI_WSTRB),
.S_AXI_WLAST (S_AXI_WLAST),
.S_AXI_WUSER (S_AXI_WUSER),
.S_AXI_WVALID (S_AXI_WVALID),
.S_AXI_WREADY (S_AXI_WREADY),
// Master Interface Write Data Ports
.M_AXI_WID (M_AXI_WID),
.M_AXI_WDATA (M_AXI_WDATA),
.M_AXI_WSTRB (M_AXI_WSTRB),
.M_AXI_WLAST (M_AXI_WLAST),
.M_AXI_WUSER (M_AXI_WUSER),
.M_AXI_WVALID (M_AXI_WVALID),
.M_AXI_WREADY (M_AXI_WREADY)
);
// Write Response channel.
processing_system7_v5_5_b_atc #
(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_BUSER_WIDTH (C_AXI_BUSER_WIDTH),
.C_FIFO_DEPTH_LOG (C_FIFO_DEPTH_LOG)
) write_response_inst
(
// Global Signals
.ARESET (ARESET),
.ACLK (ACLK),
// Command Interface (In)
.cmd_b_push (cmd_b_push),
.cmd_b_error (cmd_b_error),
.cmd_b_id (cmd_b_id),
.cmd_b_full (cmd_b_full),
.cmd_b_addr (cmd_b_addr),
.cmd_b_ready (cmd_b_ready),
// Slave Interface Write Response Ports
.S_AXI_BID (S_AXI_BID),
.S_AXI_BRESP (S_AXI_BRESP),
.S_AXI_BUSER (S_AXI_BUSER),
.S_AXI_BVALID (S_AXI_BVALID),
.S_AXI_BREADY (S_AXI_BREADY),
// Master Interface Write Response Ports
.M_AXI_BID (M_AXI_BID),
.M_AXI_BRESP (M_AXI_BRESP),
.M_AXI_BUSER (M_AXI_BUSER),
.M_AXI_BVALID (M_AXI_BVALID),
.M_AXI_BREADY (M_AXI_BREADY),
// Trigger detection
.ERROR_TRIGGER (ERROR_TRIGGER),
.ERROR_TRANSACTION_ID (ERROR_TRANSACTION_ID)
);
/////////////////////////////////////////////////////////////////////////////
// Handle Read Channels (AR/R)
/////////////////////////////////////////////////////////////////////////////
// Read Address Port
assign M_AXI_ARID = S_AXI_ARID;
assign M_AXI_ARADDR = S_AXI_ARADDR;
assign M_AXI_ARLEN = S_AXI_ARLEN;
assign M_AXI_ARSIZE = S_AXI_ARSIZE;
assign M_AXI_ARBURST = S_AXI_ARBURST;
assign M_AXI_ARLOCK = S_AXI_ARLOCK;
assign M_AXI_ARCACHE = S_AXI_ARCACHE;
assign M_AXI_ARPROT = S_AXI_ARPROT;
assign M_AXI_ARUSER = S_AXI_ARUSER;
assign M_AXI_ARVALID = S_AXI_ARVALID;
assign S_AXI_ARREADY = M_AXI_ARREADY;
// Read Data Port
assign S_AXI_RID = M_AXI_RID;
assign S_AXI_RDATA = M_AXI_RDATA;
assign S_AXI_RRESP = M_AXI_RRESP;
assign S_AXI_RLAST = M_AXI_RLAST;
assign S_AXI_RUSER = M_AXI_RUSER;
assign S_AXI_RVALID = M_AXI_RVALID;
assign M_AXI_RREADY = S_AXI_RREADY;
endmodule
`default_nettype wire
|
//-----------------------------------------------------------------------------
//-- (c) Copyright 2010 Xilinx, Inc. All rights reserved.
//--
//-- This file contains confidential and proprietary information
//-- of Xilinx, Inc. and is protected under U.S. and
//-- international copyright and other intellectual property
//-- laws.
//--
//-- DISCLAIMER
//-- This disclaimer is not a license and does not grant any
//-- rights to the materials distributed herewith. Except as
//-- otherwise provided in a valid license issued to you by
//-- Xilinx, and to the maximum extent permitted by applicable
//-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
//-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
//-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
//-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
//-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
//-- (2) Xilinx shall not be liable (whether in contract or tort,
//-- including negligence, or under any other theory of
//-- liability) for any loss or damage of any kind or nature
//-- related to, arising under or in connection with these
//-- materials, including for any direct, or any indirect,
//-- special, incidental, or consequential loss or damage
//-- (including loss of data, profits, goodwill, or any type of
//-- loss or damage suffered as a result of any action brought
//-- by a third party) even if such damage or loss was
//-- reasonably foreseeable or Xilinx had been advised of the
//-- possibility of the same.
//--
//-- CRITICAL APPLICATIONS
//-- Xilinx products are not designed or intended to be fail-
//-- safe, or for use in any application requiring fail-safe
//-- performance, such as life-support or safety devices or
//-- systems, Class III medical devices, nuclear facilities,
//-- applications related to the deployment of airbags, or any
//-- other applications that could lead to death, personal
//-- injury, or severe property or environmental damage
//-- (individually and collectively, "Critical
//-- Applications"). Customer assumes the sole risk and
//-- liability of any use of Xilinx products in Critical
//-- Applications, subject only to applicable laws and
//-- regulations governing limitations on product liability.
//--
//-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
//-- PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
//
// Description: ACP Transaction Checker
//
// Check for optimized ACP transactions and flag if they are broken.
//
//
//
// Verilog-standard: Verilog 2001
//--------------------------------------------------------------------------
//
// Structure:
// atc
// aw_atc
// w_atc
// b_atc
//
//--------------------------------------------------------------------------
`timescale 1ps/1ps
`default_nettype none
module processing_system7_v5_5_atc #
(
parameter C_FAMILY = "rtl",
// FPGA Family. Current version: virtex6, spartan6 or later.
parameter integer C_AXI_ID_WIDTH = 4,
// Width of all ID signals on SI and MI side of checker.
// Range: >= 1.
parameter integer C_AXI_ADDR_WIDTH = 32,
// Width of all ADDR signals on SI and MI side of checker.
// Range: 32.
parameter integer C_AXI_DATA_WIDTH = 64,
// Width of all DATA signals on SI and MI side of checker.
// Range: 64.
parameter integer C_AXI_AWUSER_WIDTH = 1,
// Width of AWUSER signals.
// Range: >= 1.
parameter integer C_AXI_ARUSER_WIDTH = 1,
// Width of ARUSER signals.
// Range: >= 1.
parameter integer C_AXI_WUSER_WIDTH = 1,
// Width of WUSER signals.
// Range: >= 1.
parameter integer C_AXI_RUSER_WIDTH = 1,
// Width of RUSER signals.
// Range: >= 1.
parameter integer C_AXI_BUSER_WIDTH = 1
// Width of BUSER signals.
// Range: >= 1.
)
(
// Global Signals
input wire ACLK,
input wire ARESETN,
// Slave Interface Write Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_AWID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_AWADDR,
input wire [4-1:0] S_AXI_AWLEN,
input wire [3-1:0] S_AXI_AWSIZE,
input wire [2-1:0] S_AXI_AWBURST,
input wire [2-1:0] S_AXI_AWLOCK,
input wire [4-1:0] S_AXI_AWCACHE,
input wire [3-1:0] S_AXI_AWPROT,
input wire [C_AXI_AWUSER_WIDTH-1:0] S_AXI_AWUSER,
input wire S_AXI_AWVALID,
output wire S_AXI_AWREADY,
// Slave Interface Write Data Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_WID,
input wire [C_AXI_DATA_WIDTH-1:0] S_AXI_WDATA,
input wire [C_AXI_DATA_WIDTH/8-1:0] S_AXI_WSTRB,
input wire S_AXI_WLAST,
input wire [C_AXI_WUSER_WIDTH-1:0] S_AXI_WUSER,
input wire S_AXI_WVALID,
output wire S_AXI_WREADY,
// Slave Interface Write Response Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_BID,
output wire [2-1:0] S_AXI_BRESP,
output wire [C_AXI_BUSER_WIDTH-1:0] S_AXI_BUSER,
output wire S_AXI_BVALID,
input wire S_AXI_BREADY,
// Slave Interface Read Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_ARID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_ARADDR,
input wire [4-1:0] S_AXI_ARLEN,
input wire [3-1:0] S_AXI_ARSIZE,
input wire [2-1:0] S_AXI_ARBURST,
input wire [2-1:0] S_AXI_ARLOCK,
input wire [4-1:0] S_AXI_ARCACHE,
input wire [3-1:0] S_AXI_ARPROT,
input wire [C_AXI_ARUSER_WIDTH-1:0] S_AXI_ARUSER,
input wire S_AXI_ARVALID,
output wire S_AXI_ARREADY,
// Slave Interface Read Data Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_RID,
output wire [C_AXI_DATA_WIDTH-1:0] S_AXI_RDATA,
output wire [2-1:0] S_AXI_RRESP,
output wire S_AXI_RLAST,
output wire [C_AXI_RUSER_WIDTH-1:0] S_AXI_RUSER,
output wire S_AXI_RVALID,
input wire S_AXI_RREADY,
// Master Interface Write Address Port
output wire [C_AXI_ID_WIDTH-1:0] M_AXI_AWID,
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_AWADDR,
output wire [4-1:0] M_AXI_AWLEN,
output wire [3-1:0] M_AXI_AWSIZE,
output wire [2-1:0] M_AXI_AWBURST,
output wire [2-1:0] M_AXI_AWLOCK,
output wire [4-1:0] M_AXI_AWCACHE,
output wire [3-1:0] M_AXI_AWPROT,
output wire [C_AXI_AWUSER_WIDTH-1:0] M_AXI_AWUSER,
output wire M_AXI_AWVALID,
input wire M_AXI_AWREADY,
// Master Interface Write Data Ports
output wire [C_AXI_ID_WIDTH-1:0] M_AXI_WID,
output wire [C_AXI_DATA_WIDTH-1:0] M_AXI_WDATA,
output wire [C_AXI_DATA_WIDTH/8-1:0] M_AXI_WSTRB,
output wire M_AXI_WLAST,
output wire [C_AXI_WUSER_WIDTH-1:0] M_AXI_WUSER,
output wire M_AXI_WVALID,
input wire M_AXI_WREADY,
// Master Interface Write Response Ports
input wire [C_AXI_ID_WIDTH-1:0] M_AXI_BID,
input wire [2-1:0] M_AXI_BRESP,
input wire [C_AXI_BUSER_WIDTH-1:0] M_AXI_BUSER,
input wire M_AXI_BVALID,
output wire M_AXI_BREADY,
// Master Interface Read Address Port
output wire [C_AXI_ID_WIDTH-1:0] M_AXI_ARID,
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_ARADDR,
output wire [4-1:0] M_AXI_ARLEN,
output wire [3-1:0] M_AXI_ARSIZE,
output wire [2-1:0] M_AXI_ARBURST,
output wire [2-1:0] M_AXI_ARLOCK,
output wire [4-1:0] M_AXI_ARCACHE,
output wire [3-1:0] M_AXI_ARPROT,
output wire [C_AXI_ARUSER_WIDTH-1:0] M_AXI_ARUSER,
output wire M_AXI_ARVALID,
input wire M_AXI_ARREADY,
// Master Interface Read Data Ports
input wire [C_AXI_ID_WIDTH-1:0] M_AXI_RID,
input wire [C_AXI_DATA_WIDTH-1:0] M_AXI_RDATA,
input wire [2-1:0] M_AXI_RRESP,
input wire M_AXI_RLAST,
input wire [C_AXI_RUSER_WIDTH-1:0] M_AXI_RUSER,
input wire M_AXI_RVALID,
output wire M_AXI_RREADY,
output wire ERROR_TRIGGER,
output wire [C_AXI_ID_WIDTH-1:0] ERROR_TRANSACTION_ID
);
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
localparam C_FIFO_DEPTH_LOG = 4;
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
// Internal reset.
reg ARESET;
// AW->W command queue signals.
wire cmd_w_valid;
wire cmd_w_check;
wire [C_AXI_ID_WIDTH-1:0] cmd_w_id;
wire cmd_w_ready;
// W->B command queue signals.
wire cmd_b_push;
wire cmd_b_error;
wire [C_AXI_ID_WIDTH-1:0] cmd_b_id;
wire cmd_b_full;
wire [C_FIFO_DEPTH_LOG-1:0] cmd_b_addr;
wire cmd_b_ready;
/////////////////////////////////////////////////////////////////////////////
// Handle Internal Reset
/////////////////////////////////////////////////////////////////////////////
always @ (posedge ACLK) begin
ARESET <= !ARESETN;
end
/////////////////////////////////////////////////////////////////////////////
// Handle Write Channels (AW/W/B)
/////////////////////////////////////////////////////////////////////////////
// Write Address Channel.
processing_system7_v5_5_aw_atc #
(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_ADDR_WIDTH (C_AXI_ADDR_WIDTH),
.C_AXI_AWUSER_WIDTH (C_AXI_AWUSER_WIDTH),
.C_FIFO_DEPTH_LOG (C_FIFO_DEPTH_LOG)
) write_addr_inst
(
// Global Signals
.ARESET (ARESET),
.ACLK (ACLK),
// Command Interface (Out)
.cmd_w_valid (cmd_w_valid),
.cmd_w_check (cmd_w_check),
.cmd_w_id (cmd_w_id),
.cmd_w_ready (cmd_w_ready),
.cmd_b_addr (cmd_b_addr),
.cmd_b_ready (cmd_b_ready),
// Slave Interface Write Address Ports
.S_AXI_AWID (S_AXI_AWID),
.S_AXI_AWADDR (S_AXI_AWADDR),
.S_AXI_AWLEN (S_AXI_AWLEN),
.S_AXI_AWSIZE (S_AXI_AWSIZE),
.S_AXI_AWBURST (S_AXI_AWBURST),
.S_AXI_AWLOCK (S_AXI_AWLOCK),
.S_AXI_AWCACHE (S_AXI_AWCACHE),
.S_AXI_AWPROT (S_AXI_AWPROT),
.S_AXI_AWUSER (S_AXI_AWUSER),
.S_AXI_AWVALID (S_AXI_AWVALID),
.S_AXI_AWREADY (S_AXI_AWREADY),
// Master Interface Write Address Port
.M_AXI_AWID (M_AXI_AWID),
.M_AXI_AWADDR (M_AXI_AWADDR),
.M_AXI_AWLEN (M_AXI_AWLEN),
.M_AXI_AWSIZE (M_AXI_AWSIZE),
.M_AXI_AWBURST (M_AXI_AWBURST),
.M_AXI_AWLOCK (M_AXI_AWLOCK),
.M_AXI_AWCACHE (M_AXI_AWCACHE),
.M_AXI_AWPROT (M_AXI_AWPROT),
.M_AXI_AWUSER (M_AXI_AWUSER),
.M_AXI_AWVALID (M_AXI_AWVALID),
.M_AXI_AWREADY (M_AXI_AWREADY)
);
// Write Data channel.
processing_system7_v5_5_w_atc #
(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_WUSER_WIDTH (C_AXI_WUSER_WIDTH)
) write_data_inst
(
// Global Signals
.ARESET (ARESET),
.ACLK (ACLK),
// Command Interface (In)
.cmd_w_valid (cmd_w_valid),
.cmd_w_check (cmd_w_check),
.cmd_w_id (cmd_w_id),
.cmd_w_ready (cmd_w_ready),
// Command Interface (Out)
.cmd_b_push (cmd_b_push),
.cmd_b_error (cmd_b_error),
.cmd_b_id (cmd_b_id),
.cmd_b_full (cmd_b_full),
// Slave Interface Write Data Ports
.S_AXI_WID (S_AXI_WID),
.S_AXI_WDATA (S_AXI_WDATA),
.S_AXI_WSTRB (S_AXI_WSTRB),
.S_AXI_WLAST (S_AXI_WLAST),
.S_AXI_WUSER (S_AXI_WUSER),
.S_AXI_WVALID (S_AXI_WVALID),
.S_AXI_WREADY (S_AXI_WREADY),
// Master Interface Write Data Ports
.M_AXI_WID (M_AXI_WID),
.M_AXI_WDATA (M_AXI_WDATA),
.M_AXI_WSTRB (M_AXI_WSTRB),
.M_AXI_WLAST (M_AXI_WLAST),
.M_AXI_WUSER (M_AXI_WUSER),
.M_AXI_WVALID (M_AXI_WVALID),
.M_AXI_WREADY (M_AXI_WREADY)
);
// Write Response channel.
processing_system7_v5_5_b_atc #
(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_BUSER_WIDTH (C_AXI_BUSER_WIDTH),
.C_FIFO_DEPTH_LOG (C_FIFO_DEPTH_LOG)
) write_response_inst
(
// Global Signals
.ARESET (ARESET),
.ACLK (ACLK),
// Command Interface (In)
.cmd_b_push (cmd_b_push),
.cmd_b_error (cmd_b_error),
.cmd_b_id (cmd_b_id),
.cmd_b_full (cmd_b_full),
.cmd_b_addr (cmd_b_addr),
.cmd_b_ready (cmd_b_ready),
// Slave Interface Write Response Ports
.S_AXI_BID (S_AXI_BID),
.S_AXI_BRESP (S_AXI_BRESP),
.S_AXI_BUSER (S_AXI_BUSER),
.S_AXI_BVALID (S_AXI_BVALID),
.S_AXI_BREADY (S_AXI_BREADY),
// Master Interface Write Response Ports
.M_AXI_BID (M_AXI_BID),
.M_AXI_BRESP (M_AXI_BRESP),
.M_AXI_BUSER (M_AXI_BUSER),
.M_AXI_BVALID (M_AXI_BVALID),
.M_AXI_BREADY (M_AXI_BREADY),
// Trigger detection
.ERROR_TRIGGER (ERROR_TRIGGER),
.ERROR_TRANSACTION_ID (ERROR_TRANSACTION_ID)
);
/////////////////////////////////////////////////////////////////////////////
// Handle Read Channels (AR/R)
/////////////////////////////////////////////////////////////////////////////
// Read Address Port
assign M_AXI_ARID = S_AXI_ARID;
assign M_AXI_ARADDR = S_AXI_ARADDR;
assign M_AXI_ARLEN = S_AXI_ARLEN;
assign M_AXI_ARSIZE = S_AXI_ARSIZE;
assign M_AXI_ARBURST = S_AXI_ARBURST;
assign M_AXI_ARLOCK = S_AXI_ARLOCK;
assign M_AXI_ARCACHE = S_AXI_ARCACHE;
assign M_AXI_ARPROT = S_AXI_ARPROT;
assign M_AXI_ARUSER = S_AXI_ARUSER;
assign M_AXI_ARVALID = S_AXI_ARVALID;
assign S_AXI_ARREADY = M_AXI_ARREADY;
// Read Data Port
assign S_AXI_RID = M_AXI_RID;
assign S_AXI_RDATA = M_AXI_RDATA;
assign S_AXI_RRESP = M_AXI_RRESP;
assign S_AXI_RLAST = M_AXI_RLAST;
assign S_AXI_RUSER = M_AXI_RUSER;
assign S_AXI_RVALID = M_AXI_RVALID;
assign M_AXI_RREADY = S_AXI_RREADY;
endmodule
`default_nettype wire
|
//-----------------------------------------------------------------------------
//-- (c) Copyright 2010 Xilinx, Inc. All rights reserved.
//--
//-- This file contains confidential and proprietary information
//-- of Xilinx, Inc. and is protected under U.S. and
//-- international copyright and other intellectual property
//-- laws.
//--
//-- DISCLAIMER
//-- This disclaimer is not a license and does not grant any
//-- rights to the materials distributed herewith. Except as
//-- otherwise provided in a valid license issued to you by
//-- Xilinx, and to the maximum extent permitted by applicable
//-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
//-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
//-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
//-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
//-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
//-- (2) Xilinx shall not be liable (whether in contract or tort,
//-- including negligence, or under any other theory of
//-- liability) for any loss or damage of any kind or nature
//-- related to, arising under or in connection with these
//-- materials, including for any direct, or any indirect,
//-- special, incidental, or consequential loss or damage
//-- (including loss of data, profits, goodwill, or any type of
//-- loss or damage suffered as a result of any action brought
//-- by a third party) even if such damage or loss was
//-- reasonably foreseeable or Xilinx had been advised of the
//-- possibility of the same.
//--
//-- CRITICAL APPLICATIONS
//-- Xilinx products are not designed or intended to be fail-
//-- safe, or for use in any application requiring fail-safe
//-- performance, such as life-support or safety devices or
//-- systems, Class III medical devices, nuclear facilities,
//-- applications related to the deployment of airbags, or any
//-- other applications that could lead to death, personal
//-- injury, or severe property or environmental damage
//-- (individually and collectively, "Critical
//-- Applications"). Customer assumes the sole risk and
//-- liability of any use of Xilinx products in Critical
//-- Applications, subject only to applicable laws and
//-- regulations governing limitations on product liability.
//--
//-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
//-- PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
//
// Description: ACP Transaction Checker
//
// Check for optimized ACP transactions and flag if they are broken.
//
//
//
// Verilog-standard: Verilog 2001
//--------------------------------------------------------------------------
//
// Structure:
// atc
// aw_atc
// w_atc
// b_atc
//
//--------------------------------------------------------------------------
`timescale 1ps/1ps
`default_nettype none
module processing_system7_v5_5_atc #
(
parameter C_FAMILY = "rtl",
// FPGA Family. Current version: virtex6, spartan6 or later.
parameter integer C_AXI_ID_WIDTH = 4,
// Width of all ID signals on SI and MI side of checker.
// Range: >= 1.
parameter integer C_AXI_ADDR_WIDTH = 32,
// Width of all ADDR signals on SI and MI side of checker.
// Range: 32.
parameter integer C_AXI_DATA_WIDTH = 64,
// Width of all DATA signals on SI and MI side of checker.
// Range: 64.
parameter integer C_AXI_AWUSER_WIDTH = 1,
// Width of AWUSER signals.
// Range: >= 1.
parameter integer C_AXI_ARUSER_WIDTH = 1,
// Width of ARUSER signals.
// Range: >= 1.
parameter integer C_AXI_WUSER_WIDTH = 1,
// Width of WUSER signals.
// Range: >= 1.
parameter integer C_AXI_RUSER_WIDTH = 1,
// Width of RUSER signals.
// Range: >= 1.
parameter integer C_AXI_BUSER_WIDTH = 1
// Width of BUSER signals.
// Range: >= 1.
)
(
// Global Signals
input wire ACLK,
input wire ARESETN,
// Slave Interface Write Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_AWID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_AWADDR,
input wire [4-1:0] S_AXI_AWLEN,
input wire [3-1:0] S_AXI_AWSIZE,
input wire [2-1:0] S_AXI_AWBURST,
input wire [2-1:0] S_AXI_AWLOCK,
input wire [4-1:0] S_AXI_AWCACHE,
input wire [3-1:0] S_AXI_AWPROT,
input wire [C_AXI_AWUSER_WIDTH-1:0] S_AXI_AWUSER,
input wire S_AXI_AWVALID,
output wire S_AXI_AWREADY,
// Slave Interface Write Data Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_WID,
input wire [C_AXI_DATA_WIDTH-1:0] S_AXI_WDATA,
input wire [C_AXI_DATA_WIDTH/8-1:0] S_AXI_WSTRB,
input wire S_AXI_WLAST,
input wire [C_AXI_WUSER_WIDTH-1:0] S_AXI_WUSER,
input wire S_AXI_WVALID,
output wire S_AXI_WREADY,
// Slave Interface Write Response Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_BID,
output wire [2-1:0] S_AXI_BRESP,
output wire [C_AXI_BUSER_WIDTH-1:0] S_AXI_BUSER,
output wire S_AXI_BVALID,
input wire S_AXI_BREADY,
// Slave Interface Read Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_ARID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_ARADDR,
input wire [4-1:0] S_AXI_ARLEN,
input wire [3-1:0] S_AXI_ARSIZE,
input wire [2-1:0] S_AXI_ARBURST,
input wire [2-1:0] S_AXI_ARLOCK,
input wire [4-1:0] S_AXI_ARCACHE,
input wire [3-1:0] S_AXI_ARPROT,
input wire [C_AXI_ARUSER_WIDTH-1:0] S_AXI_ARUSER,
input wire S_AXI_ARVALID,
output wire S_AXI_ARREADY,
// Slave Interface Read Data Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_RID,
output wire [C_AXI_DATA_WIDTH-1:0] S_AXI_RDATA,
output wire [2-1:0] S_AXI_RRESP,
output wire S_AXI_RLAST,
output wire [C_AXI_RUSER_WIDTH-1:0] S_AXI_RUSER,
output wire S_AXI_RVALID,
input wire S_AXI_RREADY,
// Master Interface Write Address Port
output wire [C_AXI_ID_WIDTH-1:0] M_AXI_AWID,
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_AWADDR,
output wire [4-1:0] M_AXI_AWLEN,
output wire [3-1:0] M_AXI_AWSIZE,
output wire [2-1:0] M_AXI_AWBURST,
output wire [2-1:0] M_AXI_AWLOCK,
output wire [4-1:0] M_AXI_AWCACHE,
output wire [3-1:0] M_AXI_AWPROT,
output wire [C_AXI_AWUSER_WIDTH-1:0] M_AXI_AWUSER,
output wire M_AXI_AWVALID,
input wire M_AXI_AWREADY,
// Master Interface Write Data Ports
output wire [C_AXI_ID_WIDTH-1:0] M_AXI_WID,
output wire [C_AXI_DATA_WIDTH-1:0] M_AXI_WDATA,
output wire [C_AXI_DATA_WIDTH/8-1:0] M_AXI_WSTRB,
output wire M_AXI_WLAST,
output wire [C_AXI_WUSER_WIDTH-1:0] M_AXI_WUSER,
output wire M_AXI_WVALID,
input wire M_AXI_WREADY,
// Master Interface Write Response Ports
input wire [C_AXI_ID_WIDTH-1:0] M_AXI_BID,
input wire [2-1:0] M_AXI_BRESP,
input wire [C_AXI_BUSER_WIDTH-1:0] M_AXI_BUSER,
input wire M_AXI_BVALID,
output wire M_AXI_BREADY,
// Master Interface Read Address Port
output wire [C_AXI_ID_WIDTH-1:0] M_AXI_ARID,
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_ARADDR,
output wire [4-1:0] M_AXI_ARLEN,
output wire [3-1:0] M_AXI_ARSIZE,
output wire [2-1:0] M_AXI_ARBURST,
output wire [2-1:0] M_AXI_ARLOCK,
output wire [4-1:0] M_AXI_ARCACHE,
output wire [3-1:0] M_AXI_ARPROT,
output wire [C_AXI_ARUSER_WIDTH-1:0] M_AXI_ARUSER,
output wire M_AXI_ARVALID,
input wire M_AXI_ARREADY,
// Master Interface Read Data Ports
input wire [C_AXI_ID_WIDTH-1:0] M_AXI_RID,
input wire [C_AXI_DATA_WIDTH-1:0] M_AXI_RDATA,
input wire [2-1:0] M_AXI_RRESP,
input wire M_AXI_RLAST,
input wire [C_AXI_RUSER_WIDTH-1:0] M_AXI_RUSER,
input wire M_AXI_RVALID,
output wire M_AXI_RREADY,
output wire ERROR_TRIGGER,
output wire [C_AXI_ID_WIDTH-1:0] ERROR_TRANSACTION_ID
);
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
localparam C_FIFO_DEPTH_LOG = 4;
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
// Internal reset.
reg ARESET;
// AW->W command queue signals.
wire cmd_w_valid;
wire cmd_w_check;
wire [C_AXI_ID_WIDTH-1:0] cmd_w_id;
wire cmd_w_ready;
// W->B command queue signals.
wire cmd_b_push;
wire cmd_b_error;
wire [C_AXI_ID_WIDTH-1:0] cmd_b_id;
wire cmd_b_full;
wire [C_FIFO_DEPTH_LOG-1:0] cmd_b_addr;
wire cmd_b_ready;
/////////////////////////////////////////////////////////////////////////////
// Handle Internal Reset
/////////////////////////////////////////////////////////////////////////////
always @ (posedge ACLK) begin
ARESET <= !ARESETN;
end
/////////////////////////////////////////////////////////////////////////////
// Handle Write Channels (AW/W/B)
/////////////////////////////////////////////////////////////////////////////
// Write Address Channel.
processing_system7_v5_5_aw_atc #
(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_ADDR_WIDTH (C_AXI_ADDR_WIDTH),
.C_AXI_AWUSER_WIDTH (C_AXI_AWUSER_WIDTH),
.C_FIFO_DEPTH_LOG (C_FIFO_DEPTH_LOG)
) write_addr_inst
(
// Global Signals
.ARESET (ARESET),
.ACLK (ACLK),
// Command Interface (Out)
.cmd_w_valid (cmd_w_valid),
.cmd_w_check (cmd_w_check),
.cmd_w_id (cmd_w_id),
.cmd_w_ready (cmd_w_ready),
.cmd_b_addr (cmd_b_addr),
.cmd_b_ready (cmd_b_ready),
// Slave Interface Write Address Ports
.S_AXI_AWID (S_AXI_AWID),
.S_AXI_AWADDR (S_AXI_AWADDR),
.S_AXI_AWLEN (S_AXI_AWLEN),
.S_AXI_AWSIZE (S_AXI_AWSIZE),
.S_AXI_AWBURST (S_AXI_AWBURST),
.S_AXI_AWLOCK (S_AXI_AWLOCK),
.S_AXI_AWCACHE (S_AXI_AWCACHE),
.S_AXI_AWPROT (S_AXI_AWPROT),
.S_AXI_AWUSER (S_AXI_AWUSER),
.S_AXI_AWVALID (S_AXI_AWVALID),
.S_AXI_AWREADY (S_AXI_AWREADY),
// Master Interface Write Address Port
.M_AXI_AWID (M_AXI_AWID),
.M_AXI_AWADDR (M_AXI_AWADDR),
.M_AXI_AWLEN (M_AXI_AWLEN),
.M_AXI_AWSIZE (M_AXI_AWSIZE),
.M_AXI_AWBURST (M_AXI_AWBURST),
.M_AXI_AWLOCK (M_AXI_AWLOCK),
.M_AXI_AWCACHE (M_AXI_AWCACHE),
.M_AXI_AWPROT (M_AXI_AWPROT),
.M_AXI_AWUSER (M_AXI_AWUSER),
.M_AXI_AWVALID (M_AXI_AWVALID),
.M_AXI_AWREADY (M_AXI_AWREADY)
);
// Write Data channel.
processing_system7_v5_5_w_atc #
(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_WUSER_WIDTH (C_AXI_WUSER_WIDTH)
) write_data_inst
(
// Global Signals
.ARESET (ARESET),
.ACLK (ACLK),
// Command Interface (In)
.cmd_w_valid (cmd_w_valid),
.cmd_w_check (cmd_w_check),
.cmd_w_id (cmd_w_id),
.cmd_w_ready (cmd_w_ready),
// Command Interface (Out)
.cmd_b_push (cmd_b_push),
.cmd_b_error (cmd_b_error),
.cmd_b_id (cmd_b_id),
.cmd_b_full (cmd_b_full),
// Slave Interface Write Data Ports
.S_AXI_WID (S_AXI_WID),
.S_AXI_WDATA (S_AXI_WDATA),
.S_AXI_WSTRB (S_AXI_WSTRB),
.S_AXI_WLAST (S_AXI_WLAST),
.S_AXI_WUSER (S_AXI_WUSER),
.S_AXI_WVALID (S_AXI_WVALID),
.S_AXI_WREADY (S_AXI_WREADY),
// Master Interface Write Data Ports
.M_AXI_WID (M_AXI_WID),
.M_AXI_WDATA (M_AXI_WDATA),
.M_AXI_WSTRB (M_AXI_WSTRB),
.M_AXI_WLAST (M_AXI_WLAST),
.M_AXI_WUSER (M_AXI_WUSER),
.M_AXI_WVALID (M_AXI_WVALID),
.M_AXI_WREADY (M_AXI_WREADY)
);
// Write Response channel.
processing_system7_v5_5_b_atc #
(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_BUSER_WIDTH (C_AXI_BUSER_WIDTH),
.C_FIFO_DEPTH_LOG (C_FIFO_DEPTH_LOG)
) write_response_inst
(
// Global Signals
.ARESET (ARESET),
.ACLK (ACLK),
// Command Interface (In)
.cmd_b_push (cmd_b_push),
.cmd_b_error (cmd_b_error),
.cmd_b_id (cmd_b_id),
.cmd_b_full (cmd_b_full),
.cmd_b_addr (cmd_b_addr),
.cmd_b_ready (cmd_b_ready),
// Slave Interface Write Response Ports
.S_AXI_BID (S_AXI_BID),
.S_AXI_BRESP (S_AXI_BRESP),
.S_AXI_BUSER (S_AXI_BUSER),
.S_AXI_BVALID (S_AXI_BVALID),
.S_AXI_BREADY (S_AXI_BREADY),
// Master Interface Write Response Ports
.M_AXI_BID (M_AXI_BID),
.M_AXI_BRESP (M_AXI_BRESP),
.M_AXI_BUSER (M_AXI_BUSER),
.M_AXI_BVALID (M_AXI_BVALID),
.M_AXI_BREADY (M_AXI_BREADY),
// Trigger detection
.ERROR_TRIGGER (ERROR_TRIGGER),
.ERROR_TRANSACTION_ID (ERROR_TRANSACTION_ID)
);
/////////////////////////////////////////////////////////////////////////////
// Handle Read Channels (AR/R)
/////////////////////////////////////////////////////////////////////////////
// Read Address Port
assign M_AXI_ARID = S_AXI_ARID;
assign M_AXI_ARADDR = S_AXI_ARADDR;
assign M_AXI_ARLEN = S_AXI_ARLEN;
assign M_AXI_ARSIZE = S_AXI_ARSIZE;
assign M_AXI_ARBURST = S_AXI_ARBURST;
assign M_AXI_ARLOCK = S_AXI_ARLOCK;
assign M_AXI_ARCACHE = S_AXI_ARCACHE;
assign M_AXI_ARPROT = S_AXI_ARPROT;
assign M_AXI_ARUSER = S_AXI_ARUSER;
assign M_AXI_ARVALID = S_AXI_ARVALID;
assign S_AXI_ARREADY = M_AXI_ARREADY;
// Read Data Port
assign S_AXI_RID = M_AXI_RID;
assign S_AXI_RDATA = M_AXI_RDATA;
assign S_AXI_RRESP = M_AXI_RRESP;
assign S_AXI_RLAST = M_AXI_RLAST;
assign S_AXI_RUSER = M_AXI_RUSER;
assign S_AXI_RVALID = M_AXI_RVALID;
assign M_AXI_RREADY = S_AXI_RREADY;
endmodule
`default_nettype wire
|
// -----------------------------------------------------------
// Legal Notice: (C)2007 Altera Corporation. All rights reserved. Your
// use of Altera Corporation's design tools, logic functions and other
// software and tools, and its AMPP partner logic functions, and any
// output files any of the foregoing (including device programming or
// simulation files), and any associated documentation or information are
// expressly subject to the terms and conditions of the Altera Program
// License Subscription Agreement or other applicable license agreement,
// including, without limitation, that your use is for the sole purpose
// of programming logic devices manufactured by Altera and sold by Altera
// or its authorized distributors. Please refer to the applicable
// agreement for further details.
//
// Description: Single clock Avalon-ST FIFO.
// -----------------------------------------------------------
`timescale 1 ns / 1 ns
//altera message_off 10036
module altera_avalon_sc_fifo
#(
// --------------------------------------------------
// Parameters
// --------------------------------------------------
parameter SYMBOLS_PER_BEAT = 1,
parameter BITS_PER_SYMBOL = 8,
parameter FIFO_DEPTH = 16,
parameter CHANNEL_WIDTH = 0,
parameter ERROR_WIDTH = 0,
parameter USE_PACKETS = 0,
parameter USE_FILL_LEVEL = 0,
parameter USE_STORE_FORWARD = 0,
parameter USE_ALMOST_FULL_IF = 0,
parameter USE_ALMOST_EMPTY_IF = 0,
// --------------------------------------------------
// Empty latency is defined as the number of cycles
// required for a write to deassert the empty flag.
// For example, a latency of 1 means that the empty
// flag is deasserted on the cycle after a write.
//
// Another way to think of it is the latency for a
// write to propagate to the output.
//
// An empty latency of 0 implies lookahead, which is
// only implemented for the register-based FIFO.
// --------------------------------------------------
parameter EMPTY_LATENCY = 3,
parameter USE_MEMORY_BLOCKS = 1,
// --------------------------------------------------
// Internal Parameters
// --------------------------------------------------
parameter DATA_WIDTH = SYMBOLS_PER_BEAT * BITS_PER_SYMBOL,
parameter EMPTY_WIDTH = log2ceil(SYMBOLS_PER_BEAT)
)
(
// --------------------------------------------------
// Ports
// --------------------------------------------------
input clk,
input reset,
input [DATA_WIDTH-1: 0] in_data,
input in_valid,
input in_startofpacket,
input in_endofpacket,
input [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] in_empty,
input [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] in_error,
input [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] in_channel,
output in_ready,
output [DATA_WIDTH-1 : 0] out_data,
output reg out_valid,
output out_startofpacket,
output out_endofpacket,
output [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] out_empty,
output [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] out_error,
output [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] out_channel,
input out_ready,
input [(USE_STORE_FORWARD ? 2 : 1) : 0] csr_address,
input csr_write,
input csr_read,
input [31 : 0] csr_writedata,
output reg [31 : 0] csr_readdata,
output wire almost_full_data,
output wire almost_empty_data
);
// --------------------------------------------------
// Local Parameters
// --------------------------------------------------
localparam ADDR_WIDTH = log2ceil(FIFO_DEPTH);
localparam DEPTH = FIFO_DEPTH;
localparam PKT_SIGNALS_WIDTH = 2 + EMPTY_WIDTH;
localparam PAYLOAD_WIDTH = (USE_PACKETS == 1) ?
2 + EMPTY_WIDTH + DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH:
DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH;
// --------------------------------------------------
// Internal Signals
// --------------------------------------------------
genvar i;
reg [PAYLOAD_WIDTH-1 : 0] mem [DEPTH-1 : 0];
reg [ADDR_WIDTH-1 : 0] wr_ptr;
reg [ADDR_WIDTH-1 : 0] rd_ptr;
reg [DEPTH-1 : 0] mem_used;
wire [ADDR_WIDTH-1 : 0] next_wr_ptr;
wire [ADDR_WIDTH-1 : 0] next_rd_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_wr_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_rd_ptr;
wire [ADDR_WIDTH-1 : 0] mem_rd_ptr;
wire read;
wire write;
reg empty;
reg next_empty;
reg full;
reg next_full;
wire [PKT_SIGNALS_WIDTH-1 : 0] in_packet_signals;
wire [PKT_SIGNALS_WIDTH-1 : 0] out_packet_signals;
wire [PAYLOAD_WIDTH-1 : 0] in_payload;
reg [PAYLOAD_WIDTH-1 : 0] internal_out_payload;
reg [PAYLOAD_WIDTH-1 : 0] out_payload;
reg internal_out_valid;
wire internal_out_ready;
reg [ADDR_WIDTH : 0] fifo_fill_level;
reg [ADDR_WIDTH : 0] fill_level;
reg [ADDR_WIDTH-1 : 0] sop_ptr = 0;
wire [ADDR_WIDTH-1 : 0] curr_sop_ptr;
reg [23:0] almost_full_threshold;
reg [23:0] almost_empty_threshold;
reg [23:0] cut_through_threshold;
reg [15:0] pkt_cnt;
reg drop_on_error_en;
reg error_in_pkt;
reg pkt_has_started;
reg sop_has_left_fifo;
reg fifo_too_small_r;
reg pkt_cnt_eq_zero;
reg pkt_cnt_eq_one;
wire wait_for_threshold;
reg pkt_mode;
wire wait_for_pkt;
wire ok_to_forward;
wire in_pkt_eop_arrive;
wire out_pkt_leave;
wire in_pkt_start;
wire in_pkt_error;
wire drop_on_error;
wire fifo_too_small;
wire out_pkt_sop_leave;
wire [31:0] max_fifo_size;
reg fifo_fill_level_lt_cut_through_threshold;
// --------------------------------------------------
// Define Payload
//
// Icky part where we decide which signals form the
// payload to the FIFO with generate blocks.
// --------------------------------------------------
generate
if (EMPTY_WIDTH > 0) begin : gen_blk1
assign in_packet_signals = {in_startofpacket, in_endofpacket, in_empty};
assign {out_startofpacket, out_endofpacket, out_empty} = out_packet_signals;
end
else begin : gen_blk1_else
assign out_empty = in_error;
assign in_packet_signals = {in_startofpacket, in_endofpacket};
assign {out_startofpacket, out_endofpacket} = out_packet_signals;
end
endgenerate
generate
if (USE_PACKETS) begin : gen_blk2
if (ERROR_WIDTH > 0) begin : gen_blk3
if (CHANNEL_WIDTH > 0) begin : gen_blk4
assign in_payload = {in_packet_signals, in_data, in_error, in_channel};
assign {out_packet_signals, out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk4_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data, in_error};
assign {out_packet_signals, out_data, out_error} = out_payload;
end
end
else begin : gen_blk3_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk5
assign in_payload = {in_packet_signals, in_data, in_channel};
assign {out_packet_signals, out_data, out_channel} = out_payload;
end
else begin : gen_blk5_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data};
assign {out_packet_signals, out_data} = out_payload;
end
end
end
else begin : gen_blk2_else
assign out_packet_signals = 0;
if (ERROR_WIDTH > 0) begin : gen_blk6
if (CHANNEL_WIDTH > 0) begin : gen_blk7
assign in_payload = {in_data, in_error, in_channel};
assign {out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk7_else
assign out_channel = in_channel;
assign in_payload = {in_data, in_error};
assign {out_data, out_error} = out_payload;
end
end
else begin : gen_blk6_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk8
assign in_payload = {in_data, in_channel};
assign {out_data, out_channel} = out_payload;
end
else begin : gen_blk8_else
assign out_channel = in_channel;
assign in_payload = in_data;
assign out_data = out_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Memory-based FIFO storage
//
// To allow a ready latency of 0, the read index is
// obtained from the next read pointer and memory
// outputs are unregistered.
//
// If the empty latency is 1, we infer bypass logic
// around the memory so writes propagate to the
// outputs on the next cycle.
//
// Do not change the way this is coded: Quartus needs
// a perfect match to the template, and any attempt to
// refactor the two always blocks into one will break
// memory inference.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk9
if (EMPTY_LATENCY == 1) begin : gen_blk10
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] = in_payload;
internal_out_payload = mem[mem_rd_ptr];
end
end else begin : gen_blk10_else
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] <= in_payload;
internal_out_payload <= mem[mem_rd_ptr];
end
end
assign mem_rd_ptr = next_rd_ptr;
end else begin : gen_blk9_else
// --------------------------------------------------
// Register-based FIFO storage
//
// Uses a shift register as the storage element. Each
// shift register slot has a bit which indicates if
// the slot is occupied (credit to Sam H for the idea).
// The occupancy bits are contiguous and start from the
// lsb, so 0000, 0001, 0011, 0111, 1111 for a 4-deep
// FIFO.
//
// Each slot is enabled during a read or when it
// is unoccupied. New data is always written to every
// going-to-be-empty slot (we keep track of which ones
// are actually useful with the occupancy bits). On a
// read we shift occupied slots.
//
// The exception is the last slot, which always gets
// new data when it is unoccupied.
// --------------------------------------------------
for (i = 0; i < DEPTH-1; i = i + 1) begin : shift_reg
always @(posedge clk or posedge reset) begin
if (reset) begin
mem[i] <= 0;
end
else if (read || !mem_used[i]) begin
if (!mem_used[i+1])
mem[i] <= in_payload;
else
mem[i] <= mem[i+1];
end
end
end
always @(posedge clk, posedge reset) begin
if (reset) begin
mem[DEPTH-1] <= 0;
end
else begin
if (DEPTH == 1) begin
if (write)
mem[DEPTH-1] <= in_payload;
end
else if (!mem_used[DEPTH-1])
mem[DEPTH-1] <= in_payload;
end
end
end
endgenerate
assign read = internal_out_ready && internal_out_valid && ok_to_forward;
assign write = in_ready && in_valid;
// --------------------------------------------------
// Pointer Management
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk11
assign incremented_wr_ptr = wr_ptr + 1'b1;
assign incremented_rd_ptr = rd_ptr + 1'b1;
assign next_wr_ptr = drop_on_error ? curr_sop_ptr : write ? incremented_wr_ptr : wr_ptr;
assign next_rd_ptr = (read) ? incremented_rd_ptr : rd_ptr;
always @(posedge clk or posedge reset) begin
if (reset) begin
wr_ptr <= 0;
rd_ptr <= 0;
end
else begin
wr_ptr <= next_wr_ptr;
rd_ptr <= next_rd_ptr;
end
end
end else begin : gen_blk11_else
// --------------------------------------------------
// Shift Register Occupancy Bits
//
// Consider a 4-deep FIFO with 2 entries: 0011
// On a read and write, do not modify the bits.
// On a write, left-shift the bits to get 0111.
// On a read, right-shift the bits to get 0001.
//
// Also, on a write we set bit0 (the head), while
// clearing the tail on a read.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[0] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[0] <= 1;
else if (read) begin
if (DEPTH > 1)
mem_used[0] <= mem_used[1];
else
mem_used[0] <= 0;
end
end
end
end
if (DEPTH > 1) begin : gen_blk12
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[DEPTH-1] <= 0;
end
else begin
if (write ^ read) begin
mem_used[DEPTH-1] <= 0;
if (write)
mem_used[DEPTH-1] <= mem_used[DEPTH-2];
end
end
end
end
for (i = 1; i < DEPTH-1; i = i + 1) begin : storage_logic
always @(posedge clk, posedge reset) begin
if (reset) begin
mem_used[i] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[i] <= mem_used[i-1];
else if (read)
mem_used[i] <= mem_used[i+1];
end
end
end
end
end
endgenerate
// --------------------------------------------------
// Memory FIFO Status Management
//
// Generates the full and empty signals from the
// pointers. The FIFO is full when the next write
// pointer will be equal to the read pointer after
// a write. Reading from a FIFO clears full.
//
// The FIFO is empty when the next read pointer will
// be equal to the write pointer after a read. Writing
// to a FIFO clears empty.
//
// A simultaneous read and write must not change any of
// the empty or full flags unless there is a drop on error event.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk13
always @* begin
next_full = full;
next_empty = empty;
if (read && !write) begin
next_full = 1'b0;
if (incremented_rd_ptr == wr_ptr)
next_empty = 1'b1;
end
if (write && !read) begin
if (!drop_on_error)
next_empty = 1'b0;
else if (curr_sop_ptr == rd_ptr) // drop on error and only 1 pkt in fifo
next_empty = 1'b1;
if (incremented_wr_ptr == rd_ptr && !drop_on_error)
next_full = 1'b1;
end
if (write && read && drop_on_error) begin
if (curr_sop_ptr == next_rd_ptr)
next_empty = 1'b1;
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
empty <= 1;
full <= 0;
end
else begin
empty <= next_empty;
full <= next_full;
end
end
end else begin : gen_blk13_else
// --------------------------------------------------
// Register FIFO Status Management
//
// Full when the tail occupancy bit is 1. Empty when
// the head occupancy bit is 0.
// --------------------------------------------------
always @* begin
full = mem_used[DEPTH-1];
empty = !mem_used[0];
// ------------------------------------------
// For a single slot FIFO, reading clears the
// full status immediately.
// ------------------------------------------
if (DEPTH == 1)
full = mem_used[0] && !read;
internal_out_payload = mem[0];
// ------------------------------------------
// Writes clear empty immediately for lookahead modes.
// Note that we use in_valid instead of write to avoid
// combinational loops (in lookahead mode, qualifying
// with in_ready is meaningless).
//
// In a 1-deep FIFO, a possible combinational loop runs
// from write -> out_valid -> out_ready -> write
// ------------------------------------------
if (EMPTY_LATENCY == 0) begin
empty = !mem_used[0] && !in_valid;
if (!mem_used[0] && in_valid)
internal_out_payload = in_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Avalon-ST Signals
//
// The in_ready signal is straightforward.
//
// To match memory latency when empty latency > 1,
// out_valid assertions must be delayed by one clock
// cycle.
//
// Note: out_valid deassertions must not be delayed or
// the FIFO will underflow.
// --------------------------------------------------
assign in_ready = !full;
assign internal_out_ready = out_ready || !out_valid;
generate if (EMPTY_LATENCY > 1) begin : gen_blk14
always @(posedge clk or posedge reset) begin
if (reset)
internal_out_valid <= 0;
else begin
internal_out_valid <= !empty & ok_to_forward & ~drop_on_error;
if (read) begin
if (incremented_rd_ptr == wr_ptr)
internal_out_valid <= 1'b0;
end
end
end
end else begin : gen_blk14_else
always @* begin
internal_out_valid = !empty & ok_to_forward;
end
end
endgenerate
// --------------------------------------------------
// Single Output Pipeline Stage
//
// This output pipeline stage is enabled if the FIFO's
// empty latency is set to 3 (default). It is disabled
// for all other allowed latencies.
//
// Reason: The memory outputs are unregistered, so we have to
// register the output or fmax will drop if combinatorial
// logic is present on the output datapath.
//
// Q: The Avalon-ST spec says that I have to register my outputs
// But isn't the memory counted as a register?
// A: The path from the address lookup to the memory output is
// slow. Registering the memory outputs is a good idea.
//
// The registers get packed into the memory by the fitter
// which means minimal resources are consumed (the result
// is a altsyncram with registered outputs, available on
// all modern Altera devices).
//
// This output stage acts as an extra slot in the FIFO,
// and complicates the fill level.
// --------------------------------------------------
generate if (EMPTY_LATENCY == 3) begin : gen_blk15
always @(posedge clk or posedge reset) begin
if (reset) begin
out_valid <= 0;
out_payload <= 0;
end
else begin
if (internal_out_ready) begin
out_valid <= internal_out_valid & ok_to_forward;
out_payload <= internal_out_payload;
end
end
end
end
else begin : gen_blk15_else
always @* begin
out_valid = internal_out_valid;
out_payload = internal_out_payload;
end
end
endgenerate
// --------------------------------------------------
// Fill Level
//
// The fill level is calculated from the next write
// and read pointers to avoid unnecessary latency
// and logic.
//
// However, if the store-and-forward mode of the FIFO
// is enabled, the fill level is an up-down counter
// for fmax optimization reasons.
//
// If the output pipeline is enabled, the fill level
// must account for it, or we'll always be off by one.
// This may, or may not be important depending on the
// application.
//
// For now, we'll always calculate the exact fill level
// at the cost of an extra adder when the output stage
// is enabled.
// --------------------------------------------------
generate if (USE_FILL_LEVEL) begin : gen_blk16
wire [31:0] depth32;
assign depth32 = DEPTH;
if (USE_STORE_FORWARD) begin
reg [ADDR_WIDTH : 0] curr_packet_len_less_one;
// --------------------------------------------------
// We only drop on endofpacket. As long as we don't add to the fill
// level on the dropped endofpacket cycle, we can simply subtract
// (packet length - 1) from the fill level for dropped packets.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
curr_packet_len_less_one <= 0;
end else begin
if (write) begin
curr_packet_len_less_one <= curr_packet_len_less_one + 1'b1;
if (in_endofpacket)
curr_packet_len_less_one <= 0;
end
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
fifo_fill_level <= 0;
end else if (drop_on_error) begin
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one;
if (read)
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one - 1'b1;
end else if (write && !read) begin
fifo_fill_level <= fifo_fill_level + 1'b1;
end else if (read && !write) begin
fifo_fill_level <= fifo_fill_level - 1'b1;
end
end
end else begin
always @(posedge clk or posedge reset) begin
if (reset)
fifo_fill_level <= 0;
else if (next_full & !drop_on_error)
fifo_fill_level <= depth32[ADDR_WIDTH:0];
else begin
fifo_fill_level[ADDR_WIDTH] <= 1'b0;
fifo_fill_level[ADDR_WIDTH-1 : 0] <= next_wr_ptr - next_rd_ptr;
end
end
end
always @* begin
fill_level = fifo_fill_level;
if (EMPTY_LATENCY == 3)
fill_level = fifo_fill_level + {{ADDR_WIDTH{1'b0}}, out_valid};
end
end
else begin : gen_blk16_else
always @* begin
fill_level = 0;
end
end
endgenerate
generate if (USE_ALMOST_FULL_IF) begin : gen_blk17
assign almost_full_data = (fill_level >= almost_full_threshold);
end
else
assign almost_full_data = 0;
endgenerate
generate if (USE_ALMOST_EMPTY_IF) begin : gen_blk18
assign almost_empty_data = (fill_level <= almost_empty_threshold);
end
else
assign almost_empty_data = 0;
endgenerate
// --------------------------------------------------
// Avalon-MM Status & Control Connection Point
//
// Register map:
//
// | Addr | RW | 31 - 0 |
// | 0 | R | Fill level |
//
// The registering of this connection point means
// that there is a cycle of latency between
// reads/writes and the updating of the fill level.
// --------------------------------------------------
generate if (USE_STORE_FORWARD) begin : gen_blk19
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
cut_through_threshold <= 0;
drop_on_error_en <= 0;
csr_readdata <= 0;
pkt_mode <= 1'b1;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 5)
csr_readdata <= {31'b0, drop_on_error_en};
else if (csr_address == 4)
csr_readdata <= {8'b0, cut_through_threshold};
else if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b101)
drop_on_error_en <= csr_writedata[0];
else if(csr_address == 3'b100) begin
cut_through_threshold <= csr_writedata[23:0];
pkt_mode <= (csr_writedata[23:0] == 0);
end
else if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else if (USE_ALMOST_FULL_IF || USE_ALMOST_EMPTY_IF) begin : gen_blk19_else1
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
csr_readdata <= 0;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else begin : gen_blk19_else2
always @(posedge clk or posedge reset) begin
if (reset) begin
csr_readdata <= 0;
end
else if (csr_read) begin
csr_readdata <= 0;
if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
end
end
endgenerate
// --------------------------------------------------
// Store and forward logic
// --------------------------------------------------
// if the fifo gets full before the entire packet or the
// cut-threshold condition is met then start sending out
// data in order to avoid dead-lock situation
generate if (USE_STORE_FORWARD) begin : gen_blk20
assign wait_for_threshold = (fifo_fill_level_lt_cut_through_threshold) & wait_for_pkt ;
assign wait_for_pkt = pkt_cnt_eq_zero | (pkt_cnt_eq_one & out_pkt_leave);
assign ok_to_forward = (pkt_mode ? (~wait_for_pkt | ~pkt_has_started) :
~wait_for_threshold) | fifo_too_small_r;
assign in_pkt_eop_arrive = in_valid & in_ready & in_endofpacket;
assign in_pkt_start = in_valid & in_ready & in_startofpacket;
assign in_pkt_error = in_valid & in_ready & |in_error;
assign out_pkt_sop_leave = out_valid & out_ready & out_startofpacket;
assign out_pkt_leave = out_valid & out_ready & out_endofpacket;
assign fifo_too_small = (pkt_mode ? wait_for_pkt : wait_for_threshold) & full & out_ready;
// count packets coming and going into the fifo
always @(posedge clk or posedge reset) begin
if (reset) begin
pkt_cnt <= 0;
pkt_has_started <= 0;
sop_has_left_fifo <= 0;
fifo_too_small_r <= 0;
pkt_cnt_eq_zero <= 1'b1;
pkt_cnt_eq_one <= 1'b0;
fifo_fill_level_lt_cut_through_threshold <= 1'b1;
end
else begin
fifo_fill_level_lt_cut_through_threshold <= fifo_fill_level < cut_through_threshold;
fifo_too_small_r <= fifo_too_small;
if( in_pkt_eop_arrive )
sop_has_left_fifo <= 1'b0;
else if (out_pkt_sop_leave & pkt_cnt_eq_zero )
sop_has_left_fifo <= 1'b1;
if (in_pkt_eop_arrive & ~out_pkt_leave & ~drop_on_error ) begin
pkt_cnt <= pkt_cnt + 1'b1;
pkt_cnt_eq_zero <= 0;
if (pkt_cnt == 0)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
else if((~in_pkt_eop_arrive | drop_on_error) & out_pkt_leave) begin
pkt_cnt <= pkt_cnt - 1'b1;
if (pkt_cnt == 1)
pkt_cnt_eq_zero <= 1'b1;
else
pkt_cnt_eq_zero <= 1'b0;
if (pkt_cnt == 2)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
if (in_pkt_start)
pkt_has_started <= 1'b1;
else if (in_pkt_eop_arrive)
pkt_has_started <= 1'b0;
end
end
// drop on error logic
always @(posedge clk or posedge reset) begin
if (reset) begin
sop_ptr <= 0;
error_in_pkt <= 0;
end
else begin
// save the location of the SOP
if ( in_pkt_start )
sop_ptr <= wr_ptr;
// remember if error in pkt
// log error only if packet has already started
if (in_pkt_eop_arrive)
error_in_pkt <= 1'b0;
else if ( in_pkt_error & (pkt_has_started | in_pkt_start))
error_in_pkt <= 1'b1;
end
end
assign drop_on_error = drop_on_error_en & (error_in_pkt | in_pkt_error) & in_pkt_eop_arrive &
~sop_has_left_fifo & ~(out_pkt_sop_leave & pkt_cnt_eq_zero);
assign curr_sop_ptr = (write && in_startofpacket && in_endofpacket) ? wr_ptr : sop_ptr;
end
else begin : gen_blk20_else
assign ok_to_forward = 1'b1;
assign drop_on_error = 1'b0;
if (ADDR_WIDTH <= 1)
assign curr_sop_ptr = 1'b0;
else
assign curr_sop_ptr = {ADDR_WIDTH - 1 { 1'b0 }};
end
endgenerate
// --------------------------------------------------
// Calculates the log2ceil of the input value
// --------------------------------------------------
function integer log2ceil;
input integer val;
reg[31:0] i;
begin
i = 1;
log2ceil = 0;
while (i < val) begin
log2ceil = log2ceil + 1;
i = i[30:0] << 1;
end
end
endfunction
endmodule
|
// -----------------------------------------------------------
// Legal Notice: (C)2007 Altera Corporation. All rights reserved. Your
// use of Altera Corporation's design tools, logic functions and other
// software and tools, and its AMPP partner logic functions, and any
// output files any of the foregoing (including device programming or
// simulation files), and any associated documentation or information are
// expressly subject to the terms and conditions of the Altera Program
// License Subscription Agreement or other applicable license agreement,
// including, without limitation, that your use is for the sole purpose
// of programming logic devices manufactured by Altera and sold by Altera
// or its authorized distributors. Please refer to the applicable
// agreement for further details.
//
// Description: Single clock Avalon-ST FIFO.
// -----------------------------------------------------------
`timescale 1 ns / 1 ns
//altera message_off 10036
module altera_avalon_sc_fifo
#(
// --------------------------------------------------
// Parameters
// --------------------------------------------------
parameter SYMBOLS_PER_BEAT = 1,
parameter BITS_PER_SYMBOL = 8,
parameter FIFO_DEPTH = 16,
parameter CHANNEL_WIDTH = 0,
parameter ERROR_WIDTH = 0,
parameter USE_PACKETS = 0,
parameter USE_FILL_LEVEL = 0,
parameter USE_STORE_FORWARD = 0,
parameter USE_ALMOST_FULL_IF = 0,
parameter USE_ALMOST_EMPTY_IF = 0,
// --------------------------------------------------
// Empty latency is defined as the number of cycles
// required for a write to deassert the empty flag.
// For example, a latency of 1 means that the empty
// flag is deasserted on the cycle after a write.
//
// Another way to think of it is the latency for a
// write to propagate to the output.
//
// An empty latency of 0 implies lookahead, which is
// only implemented for the register-based FIFO.
// --------------------------------------------------
parameter EMPTY_LATENCY = 3,
parameter USE_MEMORY_BLOCKS = 1,
// --------------------------------------------------
// Internal Parameters
// --------------------------------------------------
parameter DATA_WIDTH = SYMBOLS_PER_BEAT * BITS_PER_SYMBOL,
parameter EMPTY_WIDTH = log2ceil(SYMBOLS_PER_BEAT)
)
(
// --------------------------------------------------
// Ports
// --------------------------------------------------
input clk,
input reset,
input [DATA_WIDTH-1: 0] in_data,
input in_valid,
input in_startofpacket,
input in_endofpacket,
input [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] in_empty,
input [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] in_error,
input [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] in_channel,
output in_ready,
output [DATA_WIDTH-1 : 0] out_data,
output reg out_valid,
output out_startofpacket,
output out_endofpacket,
output [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] out_empty,
output [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] out_error,
output [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] out_channel,
input out_ready,
input [(USE_STORE_FORWARD ? 2 : 1) : 0] csr_address,
input csr_write,
input csr_read,
input [31 : 0] csr_writedata,
output reg [31 : 0] csr_readdata,
output wire almost_full_data,
output wire almost_empty_data
);
// --------------------------------------------------
// Local Parameters
// --------------------------------------------------
localparam ADDR_WIDTH = log2ceil(FIFO_DEPTH);
localparam DEPTH = FIFO_DEPTH;
localparam PKT_SIGNALS_WIDTH = 2 + EMPTY_WIDTH;
localparam PAYLOAD_WIDTH = (USE_PACKETS == 1) ?
2 + EMPTY_WIDTH + DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH:
DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH;
// --------------------------------------------------
// Internal Signals
// --------------------------------------------------
genvar i;
reg [PAYLOAD_WIDTH-1 : 0] mem [DEPTH-1 : 0];
reg [ADDR_WIDTH-1 : 0] wr_ptr;
reg [ADDR_WIDTH-1 : 0] rd_ptr;
reg [DEPTH-1 : 0] mem_used;
wire [ADDR_WIDTH-1 : 0] next_wr_ptr;
wire [ADDR_WIDTH-1 : 0] next_rd_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_wr_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_rd_ptr;
wire [ADDR_WIDTH-1 : 0] mem_rd_ptr;
wire read;
wire write;
reg empty;
reg next_empty;
reg full;
reg next_full;
wire [PKT_SIGNALS_WIDTH-1 : 0] in_packet_signals;
wire [PKT_SIGNALS_WIDTH-1 : 0] out_packet_signals;
wire [PAYLOAD_WIDTH-1 : 0] in_payload;
reg [PAYLOAD_WIDTH-1 : 0] internal_out_payload;
reg [PAYLOAD_WIDTH-1 : 0] out_payload;
reg internal_out_valid;
wire internal_out_ready;
reg [ADDR_WIDTH : 0] fifo_fill_level;
reg [ADDR_WIDTH : 0] fill_level;
reg [ADDR_WIDTH-1 : 0] sop_ptr = 0;
wire [ADDR_WIDTH-1 : 0] curr_sop_ptr;
reg [23:0] almost_full_threshold;
reg [23:0] almost_empty_threshold;
reg [23:0] cut_through_threshold;
reg [15:0] pkt_cnt;
reg drop_on_error_en;
reg error_in_pkt;
reg pkt_has_started;
reg sop_has_left_fifo;
reg fifo_too_small_r;
reg pkt_cnt_eq_zero;
reg pkt_cnt_eq_one;
wire wait_for_threshold;
reg pkt_mode;
wire wait_for_pkt;
wire ok_to_forward;
wire in_pkt_eop_arrive;
wire out_pkt_leave;
wire in_pkt_start;
wire in_pkt_error;
wire drop_on_error;
wire fifo_too_small;
wire out_pkt_sop_leave;
wire [31:0] max_fifo_size;
reg fifo_fill_level_lt_cut_through_threshold;
// --------------------------------------------------
// Define Payload
//
// Icky part where we decide which signals form the
// payload to the FIFO with generate blocks.
// --------------------------------------------------
generate
if (EMPTY_WIDTH > 0) begin : gen_blk1
assign in_packet_signals = {in_startofpacket, in_endofpacket, in_empty};
assign {out_startofpacket, out_endofpacket, out_empty} = out_packet_signals;
end
else begin : gen_blk1_else
assign out_empty = in_error;
assign in_packet_signals = {in_startofpacket, in_endofpacket};
assign {out_startofpacket, out_endofpacket} = out_packet_signals;
end
endgenerate
generate
if (USE_PACKETS) begin : gen_blk2
if (ERROR_WIDTH > 0) begin : gen_blk3
if (CHANNEL_WIDTH > 0) begin : gen_blk4
assign in_payload = {in_packet_signals, in_data, in_error, in_channel};
assign {out_packet_signals, out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk4_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data, in_error};
assign {out_packet_signals, out_data, out_error} = out_payload;
end
end
else begin : gen_blk3_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk5
assign in_payload = {in_packet_signals, in_data, in_channel};
assign {out_packet_signals, out_data, out_channel} = out_payload;
end
else begin : gen_blk5_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data};
assign {out_packet_signals, out_data} = out_payload;
end
end
end
else begin : gen_blk2_else
assign out_packet_signals = 0;
if (ERROR_WIDTH > 0) begin : gen_blk6
if (CHANNEL_WIDTH > 0) begin : gen_blk7
assign in_payload = {in_data, in_error, in_channel};
assign {out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk7_else
assign out_channel = in_channel;
assign in_payload = {in_data, in_error};
assign {out_data, out_error} = out_payload;
end
end
else begin : gen_blk6_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk8
assign in_payload = {in_data, in_channel};
assign {out_data, out_channel} = out_payload;
end
else begin : gen_blk8_else
assign out_channel = in_channel;
assign in_payload = in_data;
assign out_data = out_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Memory-based FIFO storage
//
// To allow a ready latency of 0, the read index is
// obtained from the next read pointer and memory
// outputs are unregistered.
//
// If the empty latency is 1, we infer bypass logic
// around the memory so writes propagate to the
// outputs on the next cycle.
//
// Do not change the way this is coded: Quartus needs
// a perfect match to the template, and any attempt to
// refactor the two always blocks into one will break
// memory inference.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk9
if (EMPTY_LATENCY == 1) begin : gen_blk10
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] = in_payload;
internal_out_payload = mem[mem_rd_ptr];
end
end else begin : gen_blk10_else
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] <= in_payload;
internal_out_payload <= mem[mem_rd_ptr];
end
end
assign mem_rd_ptr = next_rd_ptr;
end else begin : gen_blk9_else
// --------------------------------------------------
// Register-based FIFO storage
//
// Uses a shift register as the storage element. Each
// shift register slot has a bit which indicates if
// the slot is occupied (credit to Sam H for the idea).
// The occupancy bits are contiguous and start from the
// lsb, so 0000, 0001, 0011, 0111, 1111 for a 4-deep
// FIFO.
//
// Each slot is enabled during a read or when it
// is unoccupied. New data is always written to every
// going-to-be-empty slot (we keep track of which ones
// are actually useful with the occupancy bits). On a
// read we shift occupied slots.
//
// The exception is the last slot, which always gets
// new data when it is unoccupied.
// --------------------------------------------------
for (i = 0; i < DEPTH-1; i = i + 1) begin : shift_reg
always @(posedge clk or posedge reset) begin
if (reset) begin
mem[i] <= 0;
end
else if (read || !mem_used[i]) begin
if (!mem_used[i+1])
mem[i] <= in_payload;
else
mem[i] <= mem[i+1];
end
end
end
always @(posedge clk, posedge reset) begin
if (reset) begin
mem[DEPTH-1] <= 0;
end
else begin
if (DEPTH == 1) begin
if (write)
mem[DEPTH-1] <= in_payload;
end
else if (!mem_used[DEPTH-1])
mem[DEPTH-1] <= in_payload;
end
end
end
endgenerate
assign read = internal_out_ready && internal_out_valid && ok_to_forward;
assign write = in_ready && in_valid;
// --------------------------------------------------
// Pointer Management
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk11
assign incremented_wr_ptr = wr_ptr + 1'b1;
assign incremented_rd_ptr = rd_ptr + 1'b1;
assign next_wr_ptr = drop_on_error ? curr_sop_ptr : write ? incremented_wr_ptr : wr_ptr;
assign next_rd_ptr = (read) ? incremented_rd_ptr : rd_ptr;
always @(posedge clk or posedge reset) begin
if (reset) begin
wr_ptr <= 0;
rd_ptr <= 0;
end
else begin
wr_ptr <= next_wr_ptr;
rd_ptr <= next_rd_ptr;
end
end
end else begin : gen_blk11_else
// --------------------------------------------------
// Shift Register Occupancy Bits
//
// Consider a 4-deep FIFO with 2 entries: 0011
// On a read and write, do not modify the bits.
// On a write, left-shift the bits to get 0111.
// On a read, right-shift the bits to get 0001.
//
// Also, on a write we set bit0 (the head), while
// clearing the tail on a read.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[0] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[0] <= 1;
else if (read) begin
if (DEPTH > 1)
mem_used[0] <= mem_used[1];
else
mem_used[0] <= 0;
end
end
end
end
if (DEPTH > 1) begin : gen_blk12
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[DEPTH-1] <= 0;
end
else begin
if (write ^ read) begin
mem_used[DEPTH-1] <= 0;
if (write)
mem_used[DEPTH-1] <= mem_used[DEPTH-2];
end
end
end
end
for (i = 1; i < DEPTH-1; i = i + 1) begin : storage_logic
always @(posedge clk, posedge reset) begin
if (reset) begin
mem_used[i] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[i] <= mem_used[i-1];
else if (read)
mem_used[i] <= mem_used[i+1];
end
end
end
end
end
endgenerate
// --------------------------------------------------
// Memory FIFO Status Management
//
// Generates the full and empty signals from the
// pointers. The FIFO is full when the next write
// pointer will be equal to the read pointer after
// a write. Reading from a FIFO clears full.
//
// The FIFO is empty when the next read pointer will
// be equal to the write pointer after a read. Writing
// to a FIFO clears empty.
//
// A simultaneous read and write must not change any of
// the empty or full flags unless there is a drop on error event.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk13
always @* begin
next_full = full;
next_empty = empty;
if (read && !write) begin
next_full = 1'b0;
if (incremented_rd_ptr == wr_ptr)
next_empty = 1'b1;
end
if (write && !read) begin
if (!drop_on_error)
next_empty = 1'b0;
else if (curr_sop_ptr == rd_ptr) // drop on error and only 1 pkt in fifo
next_empty = 1'b1;
if (incremented_wr_ptr == rd_ptr && !drop_on_error)
next_full = 1'b1;
end
if (write && read && drop_on_error) begin
if (curr_sop_ptr == next_rd_ptr)
next_empty = 1'b1;
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
empty <= 1;
full <= 0;
end
else begin
empty <= next_empty;
full <= next_full;
end
end
end else begin : gen_blk13_else
// --------------------------------------------------
// Register FIFO Status Management
//
// Full when the tail occupancy bit is 1. Empty when
// the head occupancy bit is 0.
// --------------------------------------------------
always @* begin
full = mem_used[DEPTH-1];
empty = !mem_used[0];
// ------------------------------------------
// For a single slot FIFO, reading clears the
// full status immediately.
// ------------------------------------------
if (DEPTH == 1)
full = mem_used[0] && !read;
internal_out_payload = mem[0];
// ------------------------------------------
// Writes clear empty immediately for lookahead modes.
// Note that we use in_valid instead of write to avoid
// combinational loops (in lookahead mode, qualifying
// with in_ready is meaningless).
//
// In a 1-deep FIFO, a possible combinational loop runs
// from write -> out_valid -> out_ready -> write
// ------------------------------------------
if (EMPTY_LATENCY == 0) begin
empty = !mem_used[0] && !in_valid;
if (!mem_used[0] && in_valid)
internal_out_payload = in_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Avalon-ST Signals
//
// The in_ready signal is straightforward.
//
// To match memory latency when empty latency > 1,
// out_valid assertions must be delayed by one clock
// cycle.
//
// Note: out_valid deassertions must not be delayed or
// the FIFO will underflow.
// --------------------------------------------------
assign in_ready = !full;
assign internal_out_ready = out_ready || !out_valid;
generate if (EMPTY_LATENCY > 1) begin : gen_blk14
always @(posedge clk or posedge reset) begin
if (reset)
internal_out_valid <= 0;
else begin
internal_out_valid <= !empty & ok_to_forward & ~drop_on_error;
if (read) begin
if (incremented_rd_ptr == wr_ptr)
internal_out_valid <= 1'b0;
end
end
end
end else begin : gen_blk14_else
always @* begin
internal_out_valid = !empty & ok_to_forward;
end
end
endgenerate
// --------------------------------------------------
// Single Output Pipeline Stage
//
// This output pipeline stage is enabled if the FIFO's
// empty latency is set to 3 (default). It is disabled
// for all other allowed latencies.
//
// Reason: The memory outputs are unregistered, so we have to
// register the output or fmax will drop if combinatorial
// logic is present on the output datapath.
//
// Q: The Avalon-ST spec says that I have to register my outputs
// But isn't the memory counted as a register?
// A: The path from the address lookup to the memory output is
// slow. Registering the memory outputs is a good idea.
//
// The registers get packed into the memory by the fitter
// which means minimal resources are consumed (the result
// is a altsyncram with registered outputs, available on
// all modern Altera devices).
//
// This output stage acts as an extra slot in the FIFO,
// and complicates the fill level.
// --------------------------------------------------
generate if (EMPTY_LATENCY == 3) begin : gen_blk15
always @(posedge clk or posedge reset) begin
if (reset) begin
out_valid <= 0;
out_payload <= 0;
end
else begin
if (internal_out_ready) begin
out_valid <= internal_out_valid & ok_to_forward;
out_payload <= internal_out_payload;
end
end
end
end
else begin : gen_blk15_else
always @* begin
out_valid = internal_out_valid;
out_payload = internal_out_payload;
end
end
endgenerate
// --------------------------------------------------
// Fill Level
//
// The fill level is calculated from the next write
// and read pointers to avoid unnecessary latency
// and logic.
//
// However, if the store-and-forward mode of the FIFO
// is enabled, the fill level is an up-down counter
// for fmax optimization reasons.
//
// If the output pipeline is enabled, the fill level
// must account for it, or we'll always be off by one.
// This may, or may not be important depending on the
// application.
//
// For now, we'll always calculate the exact fill level
// at the cost of an extra adder when the output stage
// is enabled.
// --------------------------------------------------
generate if (USE_FILL_LEVEL) begin : gen_blk16
wire [31:0] depth32;
assign depth32 = DEPTH;
if (USE_STORE_FORWARD) begin
reg [ADDR_WIDTH : 0] curr_packet_len_less_one;
// --------------------------------------------------
// We only drop on endofpacket. As long as we don't add to the fill
// level on the dropped endofpacket cycle, we can simply subtract
// (packet length - 1) from the fill level for dropped packets.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
curr_packet_len_less_one <= 0;
end else begin
if (write) begin
curr_packet_len_less_one <= curr_packet_len_less_one + 1'b1;
if (in_endofpacket)
curr_packet_len_less_one <= 0;
end
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
fifo_fill_level <= 0;
end else if (drop_on_error) begin
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one;
if (read)
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one - 1'b1;
end else if (write && !read) begin
fifo_fill_level <= fifo_fill_level + 1'b1;
end else if (read && !write) begin
fifo_fill_level <= fifo_fill_level - 1'b1;
end
end
end else begin
always @(posedge clk or posedge reset) begin
if (reset)
fifo_fill_level <= 0;
else if (next_full & !drop_on_error)
fifo_fill_level <= depth32[ADDR_WIDTH:0];
else begin
fifo_fill_level[ADDR_WIDTH] <= 1'b0;
fifo_fill_level[ADDR_WIDTH-1 : 0] <= next_wr_ptr - next_rd_ptr;
end
end
end
always @* begin
fill_level = fifo_fill_level;
if (EMPTY_LATENCY == 3)
fill_level = fifo_fill_level + {{ADDR_WIDTH{1'b0}}, out_valid};
end
end
else begin : gen_blk16_else
always @* begin
fill_level = 0;
end
end
endgenerate
generate if (USE_ALMOST_FULL_IF) begin : gen_blk17
assign almost_full_data = (fill_level >= almost_full_threshold);
end
else
assign almost_full_data = 0;
endgenerate
generate if (USE_ALMOST_EMPTY_IF) begin : gen_blk18
assign almost_empty_data = (fill_level <= almost_empty_threshold);
end
else
assign almost_empty_data = 0;
endgenerate
// --------------------------------------------------
// Avalon-MM Status & Control Connection Point
//
// Register map:
//
// | Addr | RW | 31 - 0 |
// | 0 | R | Fill level |
//
// The registering of this connection point means
// that there is a cycle of latency between
// reads/writes and the updating of the fill level.
// --------------------------------------------------
generate if (USE_STORE_FORWARD) begin : gen_blk19
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
cut_through_threshold <= 0;
drop_on_error_en <= 0;
csr_readdata <= 0;
pkt_mode <= 1'b1;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 5)
csr_readdata <= {31'b0, drop_on_error_en};
else if (csr_address == 4)
csr_readdata <= {8'b0, cut_through_threshold};
else if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b101)
drop_on_error_en <= csr_writedata[0];
else if(csr_address == 3'b100) begin
cut_through_threshold <= csr_writedata[23:0];
pkt_mode <= (csr_writedata[23:0] == 0);
end
else if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else if (USE_ALMOST_FULL_IF || USE_ALMOST_EMPTY_IF) begin : gen_blk19_else1
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
csr_readdata <= 0;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else begin : gen_blk19_else2
always @(posedge clk or posedge reset) begin
if (reset) begin
csr_readdata <= 0;
end
else if (csr_read) begin
csr_readdata <= 0;
if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
end
end
endgenerate
// --------------------------------------------------
// Store and forward logic
// --------------------------------------------------
// if the fifo gets full before the entire packet or the
// cut-threshold condition is met then start sending out
// data in order to avoid dead-lock situation
generate if (USE_STORE_FORWARD) begin : gen_blk20
assign wait_for_threshold = (fifo_fill_level_lt_cut_through_threshold) & wait_for_pkt ;
assign wait_for_pkt = pkt_cnt_eq_zero | (pkt_cnt_eq_one & out_pkt_leave);
assign ok_to_forward = (pkt_mode ? (~wait_for_pkt | ~pkt_has_started) :
~wait_for_threshold) | fifo_too_small_r;
assign in_pkt_eop_arrive = in_valid & in_ready & in_endofpacket;
assign in_pkt_start = in_valid & in_ready & in_startofpacket;
assign in_pkt_error = in_valid & in_ready & |in_error;
assign out_pkt_sop_leave = out_valid & out_ready & out_startofpacket;
assign out_pkt_leave = out_valid & out_ready & out_endofpacket;
assign fifo_too_small = (pkt_mode ? wait_for_pkt : wait_for_threshold) & full & out_ready;
// count packets coming and going into the fifo
always @(posedge clk or posedge reset) begin
if (reset) begin
pkt_cnt <= 0;
pkt_has_started <= 0;
sop_has_left_fifo <= 0;
fifo_too_small_r <= 0;
pkt_cnt_eq_zero <= 1'b1;
pkt_cnt_eq_one <= 1'b0;
fifo_fill_level_lt_cut_through_threshold <= 1'b1;
end
else begin
fifo_fill_level_lt_cut_through_threshold <= fifo_fill_level < cut_through_threshold;
fifo_too_small_r <= fifo_too_small;
if( in_pkt_eop_arrive )
sop_has_left_fifo <= 1'b0;
else if (out_pkt_sop_leave & pkt_cnt_eq_zero )
sop_has_left_fifo <= 1'b1;
if (in_pkt_eop_arrive & ~out_pkt_leave & ~drop_on_error ) begin
pkt_cnt <= pkt_cnt + 1'b1;
pkt_cnt_eq_zero <= 0;
if (pkt_cnt == 0)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
else if((~in_pkt_eop_arrive | drop_on_error) & out_pkt_leave) begin
pkt_cnt <= pkt_cnt - 1'b1;
if (pkt_cnt == 1)
pkt_cnt_eq_zero <= 1'b1;
else
pkt_cnt_eq_zero <= 1'b0;
if (pkt_cnt == 2)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
if (in_pkt_start)
pkt_has_started <= 1'b1;
else if (in_pkt_eop_arrive)
pkt_has_started <= 1'b0;
end
end
// drop on error logic
always @(posedge clk or posedge reset) begin
if (reset) begin
sop_ptr <= 0;
error_in_pkt <= 0;
end
else begin
// save the location of the SOP
if ( in_pkt_start )
sop_ptr <= wr_ptr;
// remember if error in pkt
// log error only if packet has already started
if (in_pkt_eop_arrive)
error_in_pkt <= 1'b0;
else if ( in_pkt_error & (pkt_has_started | in_pkt_start))
error_in_pkt <= 1'b1;
end
end
assign drop_on_error = drop_on_error_en & (error_in_pkt | in_pkt_error) & in_pkt_eop_arrive &
~sop_has_left_fifo & ~(out_pkt_sop_leave & pkt_cnt_eq_zero);
assign curr_sop_ptr = (write && in_startofpacket && in_endofpacket) ? wr_ptr : sop_ptr;
end
else begin : gen_blk20_else
assign ok_to_forward = 1'b1;
assign drop_on_error = 1'b0;
if (ADDR_WIDTH <= 1)
assign curr_sop_ptr = 1'b0;
else
assign curr_sop_ptr = {ADDR_WIDTH - 1 { 1'b0 }};
end
endgenerate
// --------------------------------------------------
// Calculates the log2ceil of the input value
// --------------------------------------------------
function integer log2ceil;
input integer val;
reg[31:0] i;
begin
i = 1;
log2ceil = 0;
while (i < val) begin
log2ceil = log2ceil + 1;
i = i[30:0] << 1;
end
end
endfunction
endmodule
|
// -----------------------------------------------------------
// Legal Notice: (C)2007 Altera Corporation. All rights reserved. Your
// use of Altera Corporation's design tools, logic functions and other
// software and tools, and its AMPP partner logic functions, and any
// output files any of the foregoing (including device programming or
// simulation files), and any associated documentation or information are
// expressly subject to the terms and conditions of the Altera Program
// License Subscription Agreement or other applicable license agreement,
// including, without limitation, that your use is for the sole purpose
// of programming logic devices manufactured by Altera and sold by Altera
// or its authorized distributors. Please refer to the applicable
// agreement for further details.
//
// Description: Single clock Avalon-ST FIFO.
// -----------------------------------------------------------
`timescale 1 ns / 1 ns
//altera message_off 10036
module altera_avalon_sc_fifo
#(
// --------------------------------------------------
// Parameters
// --------------------------------------------------
parameter SYMBOLS_PER_BEAT = 1,
parameter BITS_PER_SYMBOL = 8,
parameter FIFO_DEPTH = 16,
parameter CHANNEL_WIDTH = 0,
parameter ERROR_WIDTH = 0,
parameter USE_PACKETS = 0,
parameter USE_FILL_LEVEL = 0,
parameter USE_STORE_FORWARD = 0,
parameter USE_ALMOST_FULL_IF = 0,
parameter USE_ALMOST_EMPTY_IF = 0,
// --------------------------------------------------
// Empty latency is defined as the number of cycles
// required for a write to deassert the empty flag.
// For example, a latency of 1 means that the empty
// flag is deasserted on the cycle after a write.
//
// Another way to think of it is the latency for a
// write to propagate to the output.
//
// An empty latency of 0 implies lookahead, which is
// only implemented for the register-based FIFO.
// --------------------------------------------------
parameter EMPTY_LATENCY = 3,
parameter USE_MEMORY_BLOCKS = 1,
// --------------------------------------------------
// Internal Parameters
// --------------------------------------------------
parameter DATA_WIDTH = SYMBOLS_PER_BEAT * BITS_PER_SYMBOL,
parameter EMPTY_WIDTH = log2ceil(SYMBOLS_PER_BEAT)
)
(
// --------------------------------------------------
// Ports
// --------------------------------------------------
input clk,
input reset,
input [DATA_WIDTH-1: 0] in_data,
input in_valid,
input in_startofpacket,
input in_endofpacket,
input [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] in_empty,
input [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] in_error,
input [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] in_channel,
output in_ready,
output [DATA_WIDTH-1 : 0] out_data,
output reg out_valid,
output out_startofpacket,
output out_endofpacket,
output [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] out_empty,
output [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] out_error,
output [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] out_channel,
input out_ready,
input [(USE_STORE_FORWARD ? 2 : 1) : 0] csr_address,
input csr_write,
input csr_read,
input [31 : 0] csr_writedata,
output reg [31 : 0] csr_readdata,
output wire almost_full_data,
output wire almost_empty_data
);
// --------------------------------------------------
// Local Parameters
// --------------------------------------------------
localparam ADDR_WIDTH = log2ceil(FIFO_DEPTH);
localparam DEPTH = FIFO_DEPTH;
localparam PKT_SIGNALS_WIDTH = 2 + EMPTY_WIDTH;
localparam PAYLOAD_WIDTH = (USE_PACKETS == 1) ?
2 + EMPTY_WIDTH + DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH:
DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH;
// --------------------------------------------------
// Internal Signals
// --------------------------------------------------
genvar i;
reg [PAYLOAD_WIDTH-1 : 0] mem [DEPTH-1 : 0];
reg [ADDR_WIDTH-1 : 0] wr_ptr;
reg [ADDR_WIDTH-1 : 0] rd_ptr;
reg [DEPTH-1 : 0] mem_used;
wire [ADDR_WIDTH-1 : 0] next_wr_ptr;
wire [ADDR_WIDTH-1 : 0] next_rd_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_wr_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_rd_ptr;
wire [ADDR_WIDTH-1 : 0] mem_rd_ptr;
wire read;
wire write;
reg empty;
reg next_empty;
reg full;
reg next_full;
wire [PKT_SIGNALS_WIDTH-1 : 0] in_packet_signals;
wire [PKT_SIGNALS_WIDTH-1 : 0] out_packet_signals;
wire [PAYLOAD_WIDTH-1 : 0] in_payload;
reg [PAYLOAD_WIDTH-1 : 0] internal_out_payload;
reg [PAYLOAD_WIDTH-1 : 0] out_payload;
reg internal_out_valid;
wire internal_out_ready;
reg [ADDR_WIDTH : 0] fifo_fill_level;
reg [ADDR_WIDTH : 0] fill_level;
reg [ADDR_WIDTH-1 : 0] sop_ptr = 0;
wire [ADDR_WIDTH-1 : 0] curr_sop_ptr;
reg [23:0] almost_full_threshold;
reg [23:0] almost_empty_threshold;
reg [23:0] cut_through_threshold;
reg [15:0] pkt_cnt;
reg drop_on_error_en;
reg error_in_pkt;
reg pkt_has_started;
reg sop_has_left_fifo;
reg fifo_too_small_r;
reg pkt_cnt_eq_zero;
reg pkt_cnt_eq_one;
wire wait_for_threshold;
reg pkt_mode;
wire wait_for_pkt;
wire ok_to_forward;
wire in_pkt_eop_arrive;
wire out_pkt_leave;
wire in_pkt_start;
wire in_pkt_error;
wire drop_on_error;
wire fifo_too_small;
wire out_pkt_sop_leave;
wire [31:0] max_fifo_size;
reg fifo_fill_level_lt_cut_through_threshold;
// --------------------------------------------------
// Define Payload
//
// Icky part where we decide which signals form the
// payload to the FIFO with generate blocks.
// --------------------------------------------------
generate
if (EMPTY_WIDTH > 0) begin : gen_blk1
assign in_packet_signals = {in_startofpacket, in_endofpacket, in_empty};
assign {out_startofpacket, out_endofpacket, out_empty} = out_packet_signals;
end
else begin : gen_blk1_else
assign out_empty = in_error;
assign in_packet_signals = {in_startofpacket, in_endofpacket};
assign {out_startofpacket, out_endofpacket} = out_packet_signals;
end
endgenerate
generate
if (USE_PACKETS) begin : gen_blk2
if (ERROR_WIDTH > 0) begin : gen_blk3
if (CHANNEL_WIDTH > 0) begin : gen_blk4
assign in_payload = {in_packet_signals, in_data, in_error, in_channel};
assign {out_packet_signals, out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk4_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data, in_error};
assign {out_packet_signals, out_data, out_error} = out_payload;
end
end
else begin : gen_blk3_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk5
assign in_payload = {in_packet_signals, in_data, in_channel};
assign {out_packet_signals, out_data, out_channel} = out_payload;
end
else begin : gen_blk5_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data};
assign {out_packet_signals, out_data} = out_payload;
end
end
end
else begin : gen_blk2_else
assign out_packet_signals = 0;
if (ERROR_WIDTH > 0) begin : gen_blk6
if (CHANNEL_WIDTH > 0) begin : gen_blk7
assign in_payload = {in_data, in_error, in_channel};
assign {out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk7_else
assign out_channel = in_channel;
assign in_payload = {in_data, in_error};
assign {out_data, out_error} = out_payload;
end
end
else begin : gen_blk6_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk8
assign in_payload = {in_data, in_channel};
assign {out_data, out_channel} = out_payload;
end
else begin : gen_blk8_else
assign out_channel = in_channel;
assign in_payload = in_data;
assign out_data = out_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Memory-based FIFO storage
//
// To allow a ready latency of 0, the read index is
// obtained from the next read pointer and memory
// outputs are unregistered.
//
// If the empty latency is 1, we infer bypass logic
// around the memory so writes propagate to the
// outputs on the next cycle.
//
// Do not change the way this is coded: Quartus needs
// a perfect match to the template, and any attempt to
// refactor the two always blocks into one will break
// memory inference.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk9
if (EMPTY_LATENCY == 1) begin : gen_blk10
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] = in_payload;
internal_out_payload = mem[mem_rd_ptr];
end
end else begin : gen_blk10_else
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] <= in_payload;
internal_out_payload <= mem[mem_rd_ptr];
end
end
assign mem_rd_ptr = next_rd_ptr;
end else begin : gen_blk9_else
// --------------------------------------------------
// Register-based FIFO storage
//
// Uses a shift register as the storage element. Each
// shift register slot has a bit which indicates if
// the slot is occupied (credit to Sam H for the idea).
// The occupancy bits are contiguous and start from the
// lsb, so 0000, 0001, 0011, 0111, 1111 for a 4-deep
// FIFO.
//
// Each slot is enabled during a read or when it
// is unoccupied. New data is always written to every
// going-to-be-empty slot (we keep track of which ones
// are actually useful with the occupancy bits). On a
// read we shift occupied slots.
//
// The exception is the last slot, which always gets
// new data when it is unoccupied.
// --------------------------------------------------
for (i = 0; i < DEPTH-1; i = i + 1) begin : shift_reg
always @(posedge clk or posedge reset) begin
if (reset) begin
mem[i] <= 0;
end
else if (read || !mem_used[i]) begin
if (!mem_used[i+1])
mem[i] <= in_payload;
else
mem[i] <= mem[i+1];
end
end
end
always @(posedge clk, posedge reset) begin
if (reset) begin
mem[DEPTH-1] <= 0;
end
else begin
if (DEPTH == 1) begin
if (write)
mem[DEPTH-1] <= in_payload;
end
else if (!mem_used[DEPTH-1])
mem[DEPTH-1] <= in_payload;
end
end
end
endgenerate
assign read = internal_out_ready && internal_out_valid && ok_to_forward;
assign write = in_ready && in_valid;
// --------------------------------------------------
// Pointer Management
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk11
assign incremented_wr_ptr = wr_ptr + 1'b1;
assign incremented_rd_ptr = rd_ptr + 1'b1;
assign next_wr_ptr = drop_on_error ? curr_sop_ptr : write ? incremented_wr_ptr : wr_ptr;
assign next_rd_ptr = (read) ? incremented_rd_ptr : rd_ptr;
always @(posedge clk or posedge reset) begin
if (reset) begin
wr_ptr <= 0;
rd_ptr <= 0;
end
else begin
wr_ptr <= next_wr_ptr;
rd_ptr <= next_rd_ptr;
end
end
end else begin : gen_blk11_else
// --------------------------------------------------
// Shift Register Occupancy Bits
//
// Consider a 4-deep FIFO with 2 entries: 0011
// On a read and write, do not modify the bits.
// On a write, left-shift the bits to get 0111.
// On a read, right-shift the bits to get 0001.
//
// Also, on a write we set bit0 (the head), while
// clearing the tail on a read.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[0] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[0] <= 1;
else if (read) begin
if (DEPTH > 1)
mem_used[0] <= mem_used[1];
else
mem_used[0] <= 0;
end
end
end
end
if (DEPTH > 1) begin : gen_blk12
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[DEPTH-1] <= 0;
end
else begin
if (write ^ read) begin
mem_used[DEPTH-1] <= 0;
if (write)
mem_used[DEPTH-1] <= mem_used[DEPTH-2];
end
end
end
end
for (i = 1; i < DEPTH-1; i = i + 1) begin : storage_logic
always @(posedge clk, posedge reset) begin
if (reset) begin
mem_used[i] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[i] <= mem_used[i-1];
else if (read)
mem_used[i] <= mem_used[i+1];
end
end
end
end
end
endgenerate
// --------------------------------------------------
// Memory FIFO Status Management
//
// Generates the full and empty signals from the
// pointers. The FIFO is full when the next write
// pointer will be equal to the read pointer after
// a write. Reading from a FIFO clears full.
//
// The FIFO is empty when the next read pointer will
// be equal to the write pointer after a read. Writing
// to a FIFO clears empty.
//
// A simultaneous read and write must not change any of
// the empty or full flags unless there is a drop on error event.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk13
always @* begin
next_full = full;
next_empty = empty;
if (read && !write) begin
next_full = 1'b0;
if (incremented_rd_ptr == wr_ptr)
next_empty = 1'b1;
end
if (write && !read) begin
if (!drop_on_error)
next_empty = 1'b0;
else if (curr_sop_ptr == rd_ptr) // drop on error and only 1 pkt in fifo
next_empty = 1'b1;
if (incremented_wr_ptr == rd_ptr && !drop_on_error)
next_full = 1'b1;
end
if (write && read && drop_on_error) begin
if (curr_sop_ptr == next_rd_ptr)
next_empty = 1'b1;
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
empty <= 1;
full <= 0;
end
else begin
empty <= next_empty;
full <= next_full;
end
end
end else begin : gen_blk13_else
// --------------------------------------------------
// Register FIFO Status Management
//
// Full when the tail occupancy bit is 1. Empty when
// the head occupancy bit is 0.
// --------------------------------------------------
always @* begin
full = mem_used[DEPTH-1];
empty = !mem_used[0];
// ------------------------------------------
// For a single slot FIFO, reading clears the
// full status immediately.
// ------------------------------------------
if (DEPTH == 1)
full = mem_used[0] && !read;
internal_out_payload = mem[0];
// ------------------------------------------
// Writes clear empty immediately for lookahead modes.
// Note that we use in_valid instead of write to avoid
// combinational loops (in lookahead mode, qualifying
// with in_ready is meaningless).
//
// In a 1-deep FIFO, a possible combinational loop runs
// from write -> out_valid -> out_ready -> write
// ------------------------------------------
if (EMPTY_LATENCY == 0) begin
empty = !mem_used[0] && !in_valid;
if (!mem_used[0] && in_valid)
internal_out_payload = in_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Avalon-ST Signals
//
// The in_ready signal is straightforward.
//
// To match memory latency when empty latency > 1,
// out_valid assertions must be delayed by one clock
// cycle.
//
// Note: out_valid deassertions must not be delayed or
// the FIFO will underflow.
// --------------------------------------------------
assign in_ready = !full;
assign internal_out_ready = out_ready || !out_valid;
generate if (EMPTY_LATENCY > 1) begin : gen_blk14
always @(posedge clk or posedge reset) begin
if (reset)
internal_out_valid <= 0;
else begin
internal_out_valid <= !empty & ok_to_forward & ~drop_on_error;
if (read) begin
if (incremented_rd_ptr == wr_ptr)
internal_out_valid <= 1'b0;
end
end
end
end else begin : gen_blk14_else
always @* begin
internal_out_valid = !empty & ok_to_forward;
end
end
endgenerate
// --------------------------------------------------
// Single Output Pipeline Stage
//
// This output pipeline stage is enabled if the FIFO's
// empty latency is set to 3 (default). It is disabled
// for all other allowed latencies.
//
// Reason: The memory outputs are unregistered, so we have to
// register the output or fmax will drop if combinatorial
// logic is present on the output datapath.
//
// Q: The Avalon-ST spec says that I have to register my outputs
// But isn't the memory counted as a register?
// A: The path from the address lookup to the memory output is
// slow. Registering the memory outputs is a good idea.
//
// The registers get packed into the memory by the fitter
// which means minimal resources are consumed (the result
// is a altsyncram with registered outputs, available on
// all modern Altera devices).
//
// This output stage acts as an extra slot in the FIFO,
// and complicates the fill level.
// --------------------------------------------------
generate if (EMPTY_LATENCY == 3) begin : gen_blk15
always @(posedge clk or posedge reset) begin
if (reset) begin
out_valid <= 0;
out_payload <= 0;
end
else begin
if (internal_out_ready) begin
out_valid <= internal_out_valid & ok_to_forward;
out_payload <= internal_out_payload;
end
end
end
end
else begin : gen_blk15_else
always @* begin
out_valid = internal_out_valid;
out_payload = internal_out_payload;
end
end
endgenerate
// --------------------------------------------------
// Fill Level
//
// The fill level is calculated from the next write
// and read pointers to avoid unnecessary latency
// and logic.
//
// However, if the store-and-forward mode of the FIFO
// is enabled, the fill level is an up-down counter
// for fmax optimization reasons.
//
// If the output pipeline is enabled, the fill level
// must account for it, or we'll always be off by one.
// This may, or may not be important depending on the
// application.
//
// For now, we'll always calculate the exact fill level
// at the cost of an extra adder when the output stage
// is enabled.
// --------------------------------------------------
generate if (USE_FILL_LEVEL) begin : gen_blk16
wire [31:0] depth32;
assign depth32 = DEPTH;
if (USE_STORE_FORWARD) begin
reg [ADDR_WIDTH : 0] curr_packet_len_less_one;
// --------------------------------------------------
// We only drop on endofpacket. As long as we don't add to the fill
// level on the dropped endofpacket cycle, we can simply subtract
// (packet length - 1) from the fill level for dropped packets.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
curr_packet_len_less_one <= 0;
end else begin
if (write) begin
curr_packet_len_less_one <= curr_packet_len_less_one + 1'b1;
if (in_endofpacket)
curr_packet_len_less_one <= 0;
end
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
fifo_fill_level <= 0;
end else if (drop_on_error) begin
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one;
if (read)
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one - 1'b1;
end else if (write && !read) begin
fifo_fill_level <= fifo_fill_level + 1'b1;
end else if (read && !write) begin
fifo_fill_level <= fifo_fill_level - 1'b1;
end
end
end else begin
always @(posedge clk or posedge reset) begin
if (reset)
fifo_fill_level <= 0;
else if (next_full & !drop_on_error)
fifo_fill_level <= depth32[ADDR_WIDTH:0];
else begin
fifo_fill_level[ADDR_WIDTH] <= 1'b0;
fifo_fill_level[ADDR_WIDTH-1 : 0] <= next_wr_ptr - next_rd_ptr;
end
end
end
always @* begin
fill_level = fifo_fill_level;
if (EMPTY_LATENCY == 3)
fill_level = fifo_fill_level + {{ADDR_WIDTH{1'b0}}, out_valid};
end
end
else begin : gen_blk16_else
always @* begin
fill_level = 0;
end
end
endgenerate
generate if (USE_ALMOST_FULL_IF) begin : gen_blk17
assign almost_full_data = (fill_level >= almost_full_threshold);
end
else
assign almost_full_data = 0;
endgenerate
generate if (USE_ALMOST_EMPTY_IF) begin : gen_blk18
assign almost_empty_data = (fill_level <= almost_empty_threshold);
end
else
assign almost_empty_data = 0;
endgenerate
// --------------------------------------------------
// Avalon-MM Status & Control Connection Point
//
// Register map:
//
// | Addr | RW | 31 - 0 |
// | 0 | R | Fill level |
//
// The registering of this connection point means
// that there is a cycle of latency between
// reads/writes and the updating of the fill level.
// --------------------------------------------------
generate if (USE_STORE_FORWARD) begin : gen_blk19
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
cut_through_threshold <= 0;
drop_on_error_en <= 0;
csr_readdata <= 0;
pkt_mode <= 1'b1;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 5)
csr_readdata <= {31'b0, drop_on_error_en};
else if (csr_address == 4)
csr_readdata <= {8'b0, cut_through_threshold};
else if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b101)
drop_on_error_en <= csr_writedata[0];
else if(csr_address == 3'b100) begin
cut_through_threshold <= csr_writedata[23:0];
pkt_mode <= (csr_writedata[23:0] == 0);
end
else if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else if (USE_ALMOST_FULL_IF || USE_ALMOST_EMPTY_IF) begin : gen_blk19_else1
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
csr_readdata <= 0;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else begin : gen_blk19_else2
always @(posedge clk or posedge reset) begin
if (reset) begin
csr_readdata <= 0;
end
else if (csr_read) begin
csr_readdata <= 0;
if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
end
end
endgenerate
// --------------------------------------------------
// Store and forward logic
// --------------------------------------------------
// if the fifo gets full before the entire packet or the
// cut-threshold condition is met then start sending out
// data in order to avoid dead-lock situation
generate if (USE_STORE_FORWARD) begin : gen_blk20
assign wait_for_threshold = (fifo_fill_level_lt_cut_through_threshold) & wait_for_pkt ;
assign wait_for_pkt = pkt_cnt_eq_zero | (pkt_cnt_eq_one & out_pkt_leave);
assign ok_to_forward = (pkt_mode ? (~wait_for_pkt | ~pkt_has_started) :
~wait_for_threshold) | fifo_too_small_r;
assign in_pkt_eop_arrive = in_valid & in_ready & in_endofpacket;
assign in_pkt_start = in_valid & in_ready & in_startofpacket;
assign in_pkt_error = in_valid & in_ready & |in_error;
assign out_pkt_sop_leave = out_valid & out_ready & out_startofpacket;
assign out_pkt_leave = out_valid & out_ready & out_endofpacket;
assign fifo_too_small = (pkt_mode ? wait_for_pkt : wait_for_threshold) & full & out_ready;
// count packets coming and going into the fifo
always @(posedge clk or posedge reset) begin
if (reset) begin
pkt_cnt <= 0;
pkt_has_started <= 0;
sop_has_left_fifo <= 0;
fifo_too_small_r <= 0;
pkt_cnt_eq_zero <= 1'b1;
pkt_cnt_eq_one <= 1'b0;
fifo_fill_level_lt_cut_through_threshold <= 1'b1;
end
else begin
fifo_fill_level_lt_cut_through_threshold <= fifo_fill_level < cut_through_threshold;
fifo_too_small_r <= fifo_too_small;
if( in_pkt_eop_arrive )
sop_has_left_fifo <= 1'b0;
else if (out_pkt_sop_leave & pkt_cnt_eq_zero )
sop_has_left_fifo <= 1'b1;
if (in_pkt_eop_arrive & ~out_pkt_leave & ~drop_on_error ) begin
pkt_cnt <= pkt_cnt + 1'b1;
pkt_cnt_eq_zero <= 0;
if (pkt_cnt == 0)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
else if((~in_pkt_eop_arrive | drop_on_error) & out_pkt_leave) begin
pkt_cnt <= pkt_cnt - 1'b1;
if (pkt_cnt == 1)
pkt_cnt_eq_zero <= 1'b1;
else
pkt_cnt_eq_zero <= 1'b0;
if (pkt_cnt == 2)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
if (in_pkt_start)
pkt_has_started <= 1'b1;
else if (in_pkt_eop_arrive)
pkt_has_started <= 1'b0;
end
end
// drop on error logic
always @(posedge clk or posedge reset) begin
if (reset) begin
sop_ptr <= 0;
error_in_pkt <= 0;
end
else begin
// save the location of the SOP
if ( in_pkt_start )
sop_ptr <= wr_ptr;
// remember if error in pkt
// log error only if packet has already started
if (in_pkt_eop_arrive)
error_in_pkt <= 1'b0;
else if ( in_pkt_error & (pkt_has_started | in_pkt_start))
error_in_pkt <= 1'b1;
end
end
assign drop_on_error = drop_on_error_en & (error_in_pkt | in_pkt_error) & in_pkt_eop_arrive &
~sop_has_left_fifo & ~(out_pkt_sop_leave & pkt_cnt_eq_zero);
assign curr_sop_ptr = (write && in_startofpacket && in_endofpacket) ? wr_ptr : sop_ptr;
end
else begin : gen_blk20_else
assign ok_to_forward = 1'b1;
assign drop_on_error = 1'b0;
if (ADDR_WIDTH <= 1)
assign curr_sop_ptr = 1'b0;
else
assign curr_sop_ptr = {ADDR_WIDTH - 1 { 1'b0 }};
end
endgenerate
// --------------------------------------------------
// Calculates the log2ceil of the input value
// --------------------------------------------------
function integer log2ceil;
input integer val;
reg[31:0] i;
begin
i = 1;
log2ceil = 0;
while (i < val) begin
log2ceil = log2ceil + 1;
i = i[30:0] << 1;
end
end
endfunction
endmodule
|
// -----------------------------------------------------------
// Legal Notice: (C)2007 Altera Corporation. All rights reserved. Your
// use of Altera Corporation's design tools, logic functions and other
// software and tools, and its AMPP partner logic functions, and any
// output files any of the foregoing (including device programming or
// simulation files), and any associated documentation or information are
// expressly subject to the terms and conditions of the Altera Program
// License Subscription Agreement or other applicable license agreement,
// including, without limitation, that your use is for the sole purpose
// of programming logic devices manufactured by Altera and sold by Altera
// or its authorized distributors. Please refer to the applicable
// agreement for further details.
//
// Description: Single clock Avalon-ST FIFO.
// -----------------------------------------------------------
`timescale 1 ns / 1 ns
//altera message_off 10036
module altera_avalon_sc_fifo
#(
// --------------------------------------------------
// Parameters
// --------------------------------------------------
parameter SYMBOLS_PER_BEAT = 1,
parameter BITS_PER_SYMBOL = 8,
parameter FIFO_DEPTH = 16,
parameter CHANNEL_WIDTH = 0,
parameter ERROR_WIDTH = 0,
parameter USE_PACKETS = 0,
parameter USE_FILL_LEVEL = 0,
parameter USE_STORE_FORWARD = 0,
parameter USE_ALMOST_FULL_IF = 0,
parameter USE_ALMOST_EMPTY_IF = 0,
// --------------------------------------------------
// Empty latency is defined as the number of cycles
// required for a write to deassert the empty flag.
// For example, a latency of 1 means that the empty
// flag is deasserted on the cycle after a write.
//
// Another way to think of it is the latency for a
// write to propagate to the output.
//
// An empty latency of 0 implies lookahead, which is
// only implemented for the register-based FIFO.
// --------------------------------------------------
parameter EMPTY_LATENCY = 3,
parameter USE_MEMORY_BLOCKS = 1,
// --------------------------------------------------
// Internal Parameters
// --------------------------------------------------
parameter DATA_WIDTH = SYMBOLS_PER_BEAT * BITS_PER_SYMBOL,
parameter EMPTY_WIDTH = log2ceil(SYMBOLS_PER_BEAT)
)
(
// --------------------------------------------------
// Ports
// --------------------------------------------------
input clk,
input reset,
input [DATA_WIDTH-1: 0] in_data,
input in_valid,
input in_startofpacket,
input in_endofpacket,
input [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] in_empty,
input [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] in_error,
input [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] in_channel,
output in_ready,
output [DATA_WIDTH-1 : 0] out_data,
output reg out_valid,
output out_startofpacket,
output out_endofpacket,
output [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] out_empty,
output [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] out_error,
output [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] out_channel,
input out_ready,
input [(USE_STORE_FORWARD ? 2 : 1) : 0] csr_address,
input csr_write,
input csr_read,
input [31 : 0] csr_writedata,
output reg [31 : 0] csr_readdata,
output wire almost_full_data,
output wire almost_empty_data
);
// --------------------------------------------------
// Local Parameters
// --------------------------------------------------
localparam ADDR_WIDTH = log2ceil(FIFO_DEPTH);
localparam DEPTH = FIFO_DEPTH;
localparam PKT_SIGNALS_WIDTH = 2 + EMPTY_WIDTH;
localparam PAYLOAD_WIDTH = (USE_PACKETS == 1) ?
2 + EMPTY_WIDTH + DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH:
DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH;
// --------------------------------------------------
// Internal Signals
// --------------------------------------------------
genvar i;
reg [PAYLOAD_WIDTH-1 : 0] mem [DEPTH-1 : 0];
reg [ADDR_WIDTH-1 : 0] wr_ptr;
reg [ADDR_WIDTH-1 : 0] rd_ptr;
reg [DEPTH-1 : 0] mem_used;
wire [ADDR_WIDTH-1 : 0] next_wr_ptr;
wire [ADDR_WIDTH-1 : 0] next_rd_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_wr_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_rd_ptr;
wire [ADDR_WIDTH-1 : 0] mem_rd_ptr;
wire read;
wire write;
reg empty;
reg next_empty;
reg full;
reg next_full;
wire [PKT_SIGNALS_WIDTH-1 : 0] in_packet_signals;
wire [PKT_SIGNALS_WIDTH-1 : 0] out_packet_signals;
wire [PAYLOAD_WIDTH-1 : 0] in_payload;
reg [PAYLOAD_WIDTH-1 : 0] internal_out_payload;
reg [PAYLOAD_WIDTH-1 : 0] out_payload;
reg internal_out_valid;
wire internal_out_ready;
reg [ADDR_WIDTH : 0] fifo_fill_level;
reg [ADDR_WIDTH : 0] fill_level;
reg [ADDR_WIDTH-1 : 0] sop_ptr = 0;
wire [ADDR_WIDTH-1 : 0] curr_sop_ptr;
reg [23:0] almost_full_threshold;
reg [23:0] almost_empty_threshold;
reg [23:0] cut_through_threshold;
reg [15:0] pkt_cnt;
reg drop_on_error_en;
reg error_in_pkt;
reg pkt_has_started;
reg sop_has_left_fifo;
reg fifo_too_small_r;
reg pkt_cnt_eq_zero;
reg pkt_cnt_eq_one;
wire wait_for_threshold;
reg pkt_mode;
wire wait_for_pkt;
wire ok_to_forward;
wire in_pkt_eop_arrive;
wire out_pkt_leave;
wire in_pkt_start;
wire in_pkt_error;
wire drop_on_error;
wire fifo_too_small;
wire out_pkt_sop_leave;
wire [31:0] max_fifo_size;
reg fifo_fill_level_lt_cut_through_threshold;
// --------------------------------------------------
// Define Payload
//
// Icky part where we decide which signals form the
// payload to the FIFO with generate blocks.
// --------------------------------------------------
generate
if (EMPTY_WIDTH > 0) begin : gen_blk1
assign in_packet_signals = {in_startofpacket, in_endofpacket, in_empty};
assign {out_startofpacket, out_endofpacket, out_empty} = out_packet_signals;
end
else begin : gen_blk1_else
assign out_empty = in_error;
assign in_packet_signals = {in_startofpacket, in_endofpacket};
assign {out_startofpacket, out_endofpacket} = out_packet_signals;
end
endgenerate
generate
if (USE_PACKETS) begin : gen_blk2
if (ERROR_WIDTH > 0) begin : gen_blk3
if (CHANNEL_WIDTH > 0) begin : gen_blk4
assign in_payload = {in_packet_signals, in_data, in_error, in_channel};
assign {out_packet_signals, out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk4_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data, in_error};
assign {out_packet_signals, out_data, out_error} = out_payload;
end
end
else begin : gen_blk3_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk5
assign in_payload = {in_packet_signals, in_data, in_channel};
assign {out_packet_signals, out_data, out_channel} = out_payload;
end
else begin : gen_blk5_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data};
assign {out_packet_signals, out_data} = out_payload;
end
end
end
else begin : gen_blk2_else
assign out_packet_signals = 0;
if (ERROR_WIDTH > 0) begin : gen_blk6
if (CHANNEL_WIDTH > 0) begin : gen_blk7
assign in_payload = {in_data, in_error, in_channel};
assign {out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk7_else
assign out_channel = in_channel;
assign in_payload = {in_data, in_error};
assign {out_data, out_error} = out_payload;
end
end
else begin : gen_blk6_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk8
assign in_payload = {in_data, in_channel};
assign {out_data, out_channel} = out_payload;
end
else begin : gen_blk8_else
assign out_channel = in_channel;
assign in_payload = in_data;
assign out_data = out_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Memory-based FIFO storage
//
// To allow a ready latency of 0, the read index is
// obtained from the next read pointer and memory
// outputs are unregistered.
//
// If the empty latency is 1, we infer bypass logic
// around the memory so writes propagate to the
// outputs on the next cycle.
//
// Do not change the way this is coded: Quartus needs
// a perfect match to the template, and any attempt to
// refactor the two always blocks into one will break
// memory inference.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk9
if (EMPTY_LATENCY == 1) begin : gen_blk10
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] = in_payload;
internal_out_payload = mem[mem_rd_ptr];
end
end else begin : gen_blk10_else
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] <= in_payload;
internal_out_payload <= mem[mem_rd_ptr];
end
end
assign mem_rd_ptr = next_rd_ptr;
end else begin : gen_blk9_else
// --------------------------------------------------
// Register-based FIFO storage
//
// Uses a shift register as the storage element. Each
// shift register slot has a bit which indicates if
// the slot is occupied (credit to Sam H for the idea).
// The occupancy bits are contiguous and start from the
// lsb, so 0000, 0001, 0011, 0111, 1111 for a 4-deep
// FIFO.
//
// Each slot is enabled during a read or when it
// is unoccupied. New data is always written to every
// going-to-be-empty slot (we keep track of which ones
// are actually useful with the occupancy bits). On a
// read we shift occupied slots.
//
// The exception is the last slot, which always gets
// new data when it is unoccupied.
// --------------------------------------------------
for (i = 0; i < DEPTH-1; i = i + 1) begin : shift_reg
always @(posedge clk or posedge reset) begin
if (reset) begin
mem[i] <= 0;
end
else if (read || !mem_used[i]) begin
if (!mem_used[i+1])
mem[i] <= in_payload;
else
mem[i] <= mem[i+1];
end
end
end
always @(posedge clk, posedge reset) begin
if (reset) begin
mem[DEPTH-1] <= 0;
end
else begin
if (DEPTH == 1) begin
if (write)
mem[DEPTH-1] <= in_payload;
end
else if (!mem_used[DEPTH-1])
mem[DEPTH-1] <= in_payload;
end
end
end
endgenerate
assign read = internal_out_ready && internal_out_valid && ok_to_forward;
assign write = in_ready && in_valid;
// --------------------------------------------------
// Pointer Management
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk11
assign incremented_wr_ptr = wr_ptr + 1'b1;
assign incremented_rd_ptr = rd_ptr + 1'b1;
assign next_wr_ptr = drop_on_error ? curr_sop_ptr : write ? incremented_wr_ptr : wr_ptr;
assign next_rd_ptr = (read) ? incremented_rd_ptr : rd_ptr;
always @(posedge clk or posedge reset) begin
if (reset) begin
wr_ptr <= 0;
rd_ptr <= 0;
end
else begin
wr_ptr <= next_wr_ptr;
rd_ptr <= next_rd_ptr;
end
end
end else begin : gen_blk11_else
// --------------------------------------------------
// Shift Register Occupancy Bits
//
// Consider a 4-deep FIFO with 2 entries: 0011
// On a read and write, do not modify the bits.
// On a write, left-shift the bits to get 0111.
// On a read, right-shift the bits to get 0001.
//
// Also, on a write we set bit0 (the head), while
// clearing the tail on a read.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[0] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[0] <= 1;
else if (read) begin
if (DEPTH > 1)
mem_used[0] <= mem_used[1];
else
mem_used[0] <= 0;
end
end
end
end
if (DEPTH > 1) begin : gen_blk12
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[DEPTH-1] <= 0;
end
else begin
if (write ^ read) begin
mem_used[DEPTH-1] <= 0;
if (write)
mem_used[DEPTH-1] <= mem_used[DEPTH-2];
end
end
end
end
for (i = 1; i < DEPTH-1; i = i + 1) begin : storage_logic
always @(posedge clk, posedge reset) begin
if (reset) begin
mem_used[i] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[i] <= mem_used[i-1];
else if (read)
mem_used[i] <= mem_used[i+1];
end
end
end
end
end
endgenerate
// --------------------------------------------------
// Memory FIFO Status Management
//
// Generates the full and empty signals from the
// pointers. The FIFO is full when the next write
// pointer will be equal to the read pointer after
// a write. Reading from a FIFO clears full.
//
// The FIFO is empty when the next read pointer will
// be equal to the write pointer after a read. Writing
// to a FIFO clears empty.
//
// A simultaneous read and write must not change any of
// the empty or full flags unless there is a drop on error event.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk13
always @* begin
next_full = full;
next_empty = empty;
if (read && !write) begin
next_full = 1'b0;
if (incremented_rd_ptr == wr_ptr)
next_empty = 1'b1;
end
if (write && !read) begin
if (!drop_on_error)
next_empty = 1'b0;
else if (curr_sop_ptr == rd_ptr) // drop on error and only 1 pkt in fifo
next_empty = 1'b1;
if (incremented_wr_ptr == rd_ptr && !drop_on_error)
next_full = 1'b1;
end
if (write && read && drop_on_error) begin
if (curr_sop_ptr == next_rd_ptr)
next_empty = 1'b1;
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
empty <= 1;
full <= 0;
end
else begin
empty <= next_empty;
full <= next_full;
end
end
end else begin : gen_blk13_else
// --------------------------------------------------
// Register FIFO Status Management
//
// Full when the tail occupancy bit is 1. Empty when
// the head occupancy bit is 0.
// --------------------------------------------------
always @* begin
full = mem_used[DEPTH-1];
empty = !mem_used[0];
// ------------------------------------------
// For a single slot FIFO, reading clears the
// full status immediately.
// ------------------------------------------
if (DEPTH == 1)
full = mem_used[0] && !read;
internal_out_payload = mem[0];
// ------------------------------------------
// Writes clear empty immediately for lookahead modes.
// Note that we use in_valid instead of write to avoid
// combinational loops (in lookahead mode, qualifying
// with in_ready is meaningless).
//
// In a 1-deep FIFO, a possible combinational loop runs
// from write -> out_valid -> out_ready -> write
// ------------------------------------------
if (EMPTY_LATENCY == 0) begin
empty = !mem_used[0] && !in_valid;
if (!mem_used[0] && in_valid)
internal_out_payload = in_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Avalon-ST Signals
//
// The in_ready signal is straightforward.
//
// To match memory latency when empty latency > 1,
// out_valid assertions must be delayed by one clock
// cycle.
//
// Note: out_valid deassertions must not be delayed or
// the FIFO will underflow.
// --------------------------------------------------
assign in_ready = !full;
assign internal_out_ready = out_ready || !out_valid;
generate if (EMPTY_LATENCY > 1) begin : gen_blk14
always @(posedge clk or posedge reset) begin
if (reset)
internal_out_valid <= 0;
else begin
internal_out_valid <= !empty & ok_to_forward & ~drop_on_error;
if (read) begin
if (incremented_rd_ptr == wr_ptr)
internal_out_valid <= 1'b0;
end
end
end
end else begin : gen_blk14_else
always @* begin
internal_out_valid = !empty & ok_to_forward;
end
end
endgenerate
// --------------------------------------------------
// Single Output Pipeline Stage
//
// This output pipeline stage is enabled if the FIFO's
// empty latency is set to 3 (default). It is disabled
// for all other allowed latencies.
//
// Reason: The memory outputs are unregistered, so we have to
// register the output or fmax will drop if combinatorial
// logic is present on the output datapath.
//
// Q: The Avalon-ST spec says that I have to register my outputs
// But isn't the memory counted as a register?
// A: The path from the address lookup to the memory output is
// slow. Registering the memory outputs is a good idea.
//
// The registers get packed into the memory by the fitter
// which means minimal resources are consumed (the result
// is a altsyncram with registered outputs, available on
// all modern Altera devices).
//
// This output stage acts as an extra slot in the FIFO,
// and complicates the fill level.
// --------------------------------------------------
generate if (EMPTY_LATENCY == 3) begin : gen_blk15
always @(posedge clk or posedge reset) begin
if (reset) begin
out_valid <= 0;
out_payload <= 0;
end
else begin
if (internal_out_ready) begin
out_valid <= internal_out_valid & ok_to_forward;
out_payload <= internal_out_payload;
end
end
end
end
else begin : gen_blk15_else
always @* begin
out_valid = internal_out_valid;
out_payload = internal_out_payload;
end
end
endgenerate
// --------------------------------------------------
// Fill Level
//
// The fill level is calculated from the next write
// and read pointers to avoid unnecessary latency
// and logic.
//
// However, if the store-and-forward mode of the FIFO
// is enabled, the fill level is an up-down counter
// for fmax optimization reasons.
//
// If the output pipeline is enabled, the fill level
// must account for it, or we'll always be off by one.
// This may, or may not be important depending on the
// application.
//
// For now, we'll always calculate the exact fill level
// at the cost of an extra adder when the output stage
// is enabled.
// --------------------------------------------------
generate if (USE_FILL_LEVEL) begin : gen_blk16
wire [31:0] depth32;
assign depth32 = DEPTH;
if (USE_STORE_FORWARD) begin
reg [ADDR_WIDTH : 0] curr_packet_len_less_one;
// --------------------------------------------------
// We only drop on endofpacket. As long as we don't add to the fill
// level on the dropped endofpacket cycle, we can simply subtract
// (packet length - 1) from the fill level for dropped packets.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
curr_packet_len_less_one <= 0;
end else begin
if (write) begin
curr_packet_len_less_one <= curr_packet_len_less_one + 1'b1;
if (in_endofpacket)
curr_packet_len_less_one <= 0;
end
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
fifo_fill_level <= 0;
end else if (drop_on_error) begin
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one;
if (read)
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one - 1'b1;
end else if (write && !read) begin
fifo_fill_level <= fifo_fill_level + 1'b1;
end else if (read && !write) begin
fifo_fill_level <= fifo_fill_level - 1'b1;
end
end
end else begin
always @(posedge clk or posedge reset) begin
if (reset)
fifo_fill_level <= 0;
else if (next_full & !drop_on_error)
fifo_fill_level <= depth32[ADDR_WIDTH:0];
else begin
fifo_fill_level[ADDR_WIDTH] <= 1'b0;
fifo_fill_level[ADDR_WIDTH-1 : 0] <= next_wr_ptr - next_rd_ptr;
end
end
end
always @* begin
fill_level = fifo_fill_level;
if (EMPTY_LATENCY == 3)
fill_level = fifo_fill_level + {{ADDR_WIDTH{1'b0}}, out_valid};
end
end
else begin : gen_blk16_else
always @* begin
fill_level = 0;
end
end
endgenerate
generate if (USE_ALMOST_FULL_IF) begin : gen_blk17
assign almost_full_data = (fill_level >= almost_full_threshold);
end
else
assign almost_full_data = 0;
endgenerate
generate if (USE_ALMOST_EMPTY_IF) begin : gen_blk18
assign almost_empty_data = (fill_level <= almost_empty_threshold);
end
else
assign almost_empty_data = 0;
endgenerate
// --------------------------------------------------
// Avalon-MM Status & Control Connection Point
//
// Register map:
//
// | Addr | RW | 31 - 0 |
// | 0 | R | Fill level |
//
// The registering of this connection point means
// that there is a cycle of latency between
// reads/writes and the updating of the fill level.
// --------------------------------------------------
generate if (USE_STORE_FORWARD) begin : gen_blk19
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
cut_through_threshold <= 0;
drop_on_error_en <= 0;
csr_readdata <= 0;
pkt_mode <= 1'b1;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 5)
csr_readdata <= {31'b0, drop_on_error_en};
else if (csr_address == 4)
csr_readdata <= {8'b0, cut_through_threshold};
else if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b101)
drop_on_error_en <= csr_writedata[0];
else if(csr_address == 3'b100) begin
cut_through_threshold <= csr_writedata[23:0];
pkt_mode <= (csr_writedata[23:0] == 0);
end
else if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else if (USE_ALMOST_FULL_IF || USE_ALMOST_EMPTY_IF) begin : gen_blk19_else1
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
csr_readdata <= 0;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else begin : gen_blk19_else2
always @(posedge clk or posedge reset) begin
if (reset) begin
csr_readdata <= 0;
end
else if (csr_read) begin
csr_readdata <= 0;
if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
end
end
endgenerate
// --------------------------------------------------
// Store and forward logic
// --------------------------------------------------
// if the fifo gets full before the entire packet or the
// cut-threshold condition is met then start sending out
// data in order to avoid dead-lock situation
generate if (USE_STORE_FORWARD) begin : gen_blk20
assign wait_for_threshold = (fifo_fill_level_lt_cut_through_threshold) & wait_for_pkt ;
assign wait_for_pkt = pkt_cnt_eq_zero | (pkt_cnt_eq_one & out_pkt_leave);
assign ok_to_forward = (pkt_mode ? (~wait_for_pkt | ~pkt_has_started) :
~wait_for_threshold) | fifo_too_small_r;
assign in_pkt_eop_arrive = in_valid & in_ready & in_endofpacket;
assign in_pkt_start = in_valid & in_ready & in_startofpacket;
assign in_pkt_error = in_valid & in_ready & |in_error;
assign out_pkt_sop_leave = out_valid & out_ready & out_startofpacket;
assign out_pkt_leave = out_valid & out_ready & out_endofpacket;
assign fifo_too_small = (pkt_mode ? wait_for_pkt : wait_for_threshold) & full & out_ready;
// count packets coming and going into the fifo
always @(posedge clk or posedge reset) begin
if (reset) begin
pkt_cnt <= 0;
pkt_has_started <= 0;
sop_has_left_fifo <= 0;
fifo_too_small_r <= 0;
pkt_cnt_eq_zero <= 1'b1;
pkt_cnt_eq_one <= 1'b0;
fifo_fill_level_lt_cut_through_threshold <= 1'b1;
end
else begin
fifo_fill_level_lt_cut_through_threshold <= fifo_fill_level < cut_through_threshold;
fifo_too_small_r <= fifo_too_small;
if( in_pkt_eop_arrive )
sop_has_left_fifo <= 1'b0;
else if (out_pkt_sop_leave & pkt_cnt_eq_zero )
sop_has_left_fifo <= 1'b1;
if (in_pkt_eop_arrive & ~out_pkt_leave & ~drop_on_error ) begin
pkt_cnt <= pkt_cnt + 1'b1;
pkt_cnt_eq_zero <= 0;
if (pkt_cnt == 0)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
else if((~in_pkt_eop_arrive | drop_on_error) & out_pkt_leave) begin
pkt_cnt <= pkt_cnt - 1'b1;
if (pkt_cnt == 1)
pkt_cnt_eq_zero <= 1'b1;
else
pkt_cnt_eq_zero <= 1'b0;
if (pkt_cnt == 2)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
if (in_pkt_start)
pkt_has_started <= 1'b1;
else if (in_pkt_eop_arrive)
pkt_has_started <= 1'b0;
end
end
// drop on error logic
always @(posedge clk or posedge reset) begin
if (reset) begin
sop_ptr <= 0;
error_in_pkt <= 0;
end
else begin
// save the location of the SOP
if ( in_pkt_start )
sop_ptr <= wr_ptr;
// remember if error in pkt
// log error only if packet has already started
if (in_pkt_eop_arrive)
error_in_pkt <= 1'b0;
else if ( in_pkt_error & (pkt_has_started | in_pkt_start))
error_in_pkt <= 1'b1;
end
end
assign drop_on_error = drop_on_error_en & (error_in_pkt | in_pkt_error) & in_pkt_eop_arrive &
~sop_has_left_fifo & ~(out_pkt_sop_leave & pkt_cnt_eq_zero);
assign curr_sop_ptr = (write && in_startofpacket && in_endofpacket) ? wr_ptr : sop_ptr;
end
else begin : gen_blk20_else
assign ok_to_forward = 1'b1;
assign drop_on_error = 1'b0;
if (ADDR_WIDTH <= 1)
assign curr_sop_ptr = 1'b0;
else
assign curr_sop_ptr = {ADDR_WIDTH - 1 { 1'b0 }};
end
endgenerate
// --------------------------------------------------
// Calculates the log2ceil of the input value
// --------------------------------------------------
function integer log2ceil;
input integer val;
reg[31:0] i;
begin
i = 1;
log2ceil = 0;
while (i < val) begin
log2ceil = log2ceil + 1;
i = i[30:0] << 1;
end
end
endfunction
endmodule
|
// -----------------------------------------------------------
// Legal Notice: (C)2007 Altera Corporation. All rights reserved. Your
// use of Altera Corporation's design tools, logic functions and other
// software and tools, and its AMPP partner logic functions, and any
// output files any of the foregoing (including device programming or
// simulation files), and any associated documentation or information are
// expressly subject to the terms and conditions of the Altera Program
// License Subscription Agreement or other applicable license agreement,
// including, without limitation, that your use is for the sole purpose
// of programming logic devices manufactured by Altera and sold by Altera
// or its authorized distributors. Please refer to the applicable
// agreement for further details.
//
// Description: Single clock Avalon-ST FIFO.
// -----------------------------------------------------------
`timescale 1 ns / 1 ns
//altera message_off 10036
module altera_avalon_sc_fifo
#(
// --------------------------------------------------
// Parameters
// --------------------------------------------------
parameter SYMBOLS_PER_BEAT = 1,
parameter BITS_PER_SYMBOL = 8,
parameter FIFO_DEPTH = 16,
parameter CHANNEL_WIDTH = 0,
parameter ERROR_WIDTH = 0,
parameter USE_PACKETS = 0,
parameter USE_FILL_LEVEL = 0,
parameter USE_STORE_FORWARD = 0,
parameter USE_ALMOST_FULL_IF = 0,
parameter USE_ALMOST_EMPTY_IF = 0,
// --------------------------------------------------
// Empty latency is defined as the number of cycles
// required for a write to deassert the empty flag.
// For example, a latency of 1 means that the empty
// flag is deasserted on the cycle after a write.
//
// Another way to think of it is the latency for a
// write to propagate to the output.
//
// An empty latency of 0 implies lookahead, which is
// only implemented for the register-based FIFO.
// --------------------------------------------------
parameter EMPTY_LATENCY = 3,
parameter USE_MEMORY_BLOCKS = 1,
// --------------------------------------------------
// Internal Parameters
// --------------------------------------------------
parameter DATA_WIDTH = SYMBOLS_PER_BEAT * BITS_PER_SYMBOL,
parameter EMPTY_WIDTH = log2ceil(SYMBOLS_PER_BEAT)
)
(
// --------------------------------------------------
// Ports
// --------------------------------------------------
input clk,
input reset,
input [DATA_WIDTH-1: 0] in_data,
input in_valid,
input in_startofpacket,
input in_endofpacket,
input [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] in_empty,
input [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] in_error,
input [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] in_channel,
output in_ready,
output [DATA_WIDTH-1 : 0] out_data,
output reg out_valid,
output out_startofpacket,
output out_endofpacket,
output [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] out_empty,
output [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] out_error,
output [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] out_channel,
input out_ready,
input [(USE_STORE_FORWARD ? 2 : 1) : 0] csr_address,
input csr_write,
input csr_read,
input [31 : 0] csr_writedata,
output reg [31 : 0] csr_readdata,
output wire almost_full_data,
output wire almost_empty_data
);
// --------------------------------------------------
// Local Parameters
// --------------------------------------------------
localparam ADDR_WIDTH = log2ceil(FIFO_DEPTH);
localparam DEPTH = FIFO_DEPTH;
localparam PKT_SIGNALS_WIDTH = 2 + EMPTY_WIDTH;
localparam PAYLOAD_WIDTH = (USE_PACKETS == 1) ?
2 + EMPTY_WIDTH + DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH:
DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH;
// --------------------------------------------------
// Internal Signals
// --------------------------------------------------
genvar i;
reg [PAYLOAD_WIDTH-1 : 0] mem [DEPTH-1 : 0];
reg [ADDR_WIDTH-1 : 0] wr_ptr;
reg [ADDR_WIDTH-1 : 0] rd_ptr;
reg [DEPTH-1 : 0] mem_used;
wire [ADDR_WIDTH-1 : 0] next_wr_ptr;
wire [ADDR_WIDTH-1 : 0] next_rd_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_wr_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_rd_ptr;
wire [ADDR_WIDTH-1 : 0] mem_rd_ptr;
wire read;
wire write;
reg empty;
reg next_empty;
reg full;
reg next_full;
wire [PKT_SIGNALS_WIDTH-1 : 0] in_packet_signals;
wire [PKT_SIGNALS_WIDTH-1 : 0] out_packet_signals;
wire [PAYLOAD_WIDTH-1 : 0] in_payload;
reg [PAYLOAD_WIDTH-1 : 0] internal_out_payload;
reg [PAYLOAD_WIDTH-1 : 0] out_payload;
reg internal_out_valid;
wire internal_out_ready;
reg [ADDR_WIDTH : 0] fifo_fill_level;
reg [ADDR_WIDTH : 0] fill_level;
reg [ADDR_WIDTH-1 : 0] sop_ptr = 0;
wire [ADDR_WIDTH-1 : 0] curr_sop_ptr;
reg [23:0] almost_full_threshold;
reg [23:0] almost_empty_threshold;
reg [23:0] cut_through_threshold;
reg [15:0] pkt_cnt;
reg drop_on_error_en;
reg error_in_pkt;
reg pkt_has_started;
reg sop_has_left_fifo;
reg fifo_too_small_r;
reg pkt_cnt_eq_zero;
reg pkt_cnt_eq_one;
wire wait_for_threshold;
reg pkt_mode;
wire wait_for_pkt;
wire ok_to_forward;
wire in_pkt_eop_arrive;
wire out_pkt_leave;
wire in_pkt_start;
wire in_pkt_error;
wire drop_on_error;
wire fifo_too_small;
wire out_pkt_sop_leave;
wire [31:0] max_fifo_size;
reg fifo_fill_level_lt_cut_through_threshold;
// --------------------------------------------------
// Define Payload
//
// Icky part where we decide which signals form the
// payload to the FIFO with generate blocks.
// --------------------------------------------------
generate
if (EMPTY_WIDTH > 0) begin : gen_blk1
assign in_packet_signals = {in_startofpacket, in_endofpacket, in_empty};
assign {out_startofpacket, out_endofpacket, out_empty} = out_packet_signals;
end
else begin : gen_blk1_else
assign out_empty = in_error;
assign in_packet_signals = {in_startofpacket, in_endofpacket};
assign {out_startofpacket, out_endofpacket} = out_packet_signals;
end
endgenerate
generate
if (USE_PACKETS) begin : gen_blk2
if (ERROR_WIDTH > 0) begin : gen_blk3
if (CHANNEL_WIDTH > 0) begin : gen_blk4
assign in_payload = {in_packet_signals, in_data, in_error, in_channel};
assign {out_packet_signals, out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk4_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data, in_error};
assign {out_packet_signals, out_data, out_error} = out_payload;
end
end
else begin : gen_blk3_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk5
assign in_payload = {in_packet_signals, in_data, in_channel};
assign {out_packet_signals, out_data, out_channel} = out_payload;
end
else begin : gen_blk5_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data};
assign {out_packet_signals, out_data} = out_payload;
end
end
end
else begin : gen_blk2_else
assign out_packet_signals = 0;
if (ERROR_WIDTH > 0) begin : gen_blk6
if (CHANNEL_WIDTH > 0) begin : gen_blk7
assign in_payload = {in_data, in_error, in_channel};
assign {out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk7_else
assign out_channel = in_channel;
assign in_payload = {in_data, in_error};
assign {out_data, out_error} = out_payload;
end
end
else begin : gen_blk6_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk8
assign in_payload = {in_data, in_channel};
assign {out_data, out_channel} = out_payload;
end
else begin : gen_blk8_else
assign out_channel = in_channel;
assign in_payload = in_data;
assign out_data = out_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Memory-based FIFO storage
//
// To allow a ready latency of 0, the read index is
// obtained from the next read pointer and memory
// outputs are unregistered.
//
// If the empty latency is 1, we infer bypass logic
// around the memory so writes propagate to the
// outputs on the next cycle.
//
// Do not change the way this is coded: Quartus needs
// a perfect match to the template, and any attempt to
// refactor the two always blocks into one will break
// memory inference.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk9
if (EMPTY_LATENCY == 1) begin : gen_blk10
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] = in_payload;
internal_out_payload = mem[mem_rd_ptr];
end
end else begin : gen_blk10_else
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] <= in_payload;
internal_out_payload <= mem[mem_rd_ptr];
end
end
assign mem_rd_ptr = next_rd_ptr;
end else begin : gen_blk9_else
// --------------------------------------------------
// Register-based FIFO storage
//
// Uses a shift register as the storage element. Each
// shift register slot has a bit which indicates if
// the slot is occupied (credit to Sam H for the idea).
// The occupancy bits are contiguous and start from the
// lsb, so 0000, 0001, 0011, 0111, 1111 for a 4-deep
// FIFO.
//
// Each slot is enabled during a read or when it
// is unoccupied. New data is always written to every
// going-to-be-empty slot (we keep track of which ones
// are actually useful with the occupancy bits). On a
// read we shift occupied slots.
//
// The exception is the last slot, which always gets
// new data when it is unoccupied.
// --------------------------------------------------
for (i = 0; i < DEPTH-1; i = i + 1) begin : shift_reg
always @(posedge clk or posedge reset) begin
if (reset) begin
mem[i] <= 0;
end
else if (read || !mem_used[i]) begin
if (!mem_used[i+1])
mem[i] <= in_payload;
else
mem[i] <= mem[i+1];
end
end
end
always @(posedge clk, posedge reset) begin
if (reset) begin
mem[DEPTH-1] <= 0;
end
else begin
if (DEPTH == 1) begin
if (write)
mem[DEPTH-1] <= in_payload;
end
else if (!mem_used[DEPTH-1])
mem[DEPTH-1] <= in_payload;
end
end
end
endgenerate
assign read = internal_out_ready && internal_out_valid && ok_to_forward;
assign write = in_ready && in_valid;
// --------------------------------------------------
// Pointer Management
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk11
assign incremented_wr_ptr = wr_ptr + 1'b1;
assign incremented_rd_ptr = rd_ptr + 1'b1;
assign next_wr_ptr = drop_on_error ? curr_sop_ptr : write ? incremented_wr_ptr : wr_ptr;
assign next_rd_ptr = (read) ? incremented_rd_ptr : rd_ptr;
always @(posedge clk or posedge reset) begin
if (reset) begin
wr_ptr <= 0;
rd_ptr <= 0;
end
else begin
wr_ptr <= next_wr_ptr;
rd_ptr <= next_rd_ptr;
end
end
end else begin : gen_blk11_else
// --------------------------------------------------
// Shift Register Occupancy Bits
//
// Consider a 4-deep FIFO with 2 entries: 0011
// On a read and write, do not modify the bits.
// On a write, left-shift the bits to get 0111.
// On a read, right-shift the bits to get 0001.
//
// Also, on a write we set bit0 (the head), while
// clearing the tail on a read.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[0] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[0] <= 1;
else if (read) begin
if (DEPTH > 1)
mem_used[0] <= mem_used[1];
else
mem_used[0] <= 0;
end
end
end
end
if (DEPTH > 1) begin : gen_blk12
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[DEPTH-1] <= 0;
end
else begin
if (write ^ read) begin
mem_used[DEPTH-1] <= 0;
if (write)
mem_used[DEPTH-1] <= mem_used[DEPTH-2];
end
end
end
end
for (i = 1; i < DEPTH-1; i = i + 1) begin : storage_logic
always @(posedge clk, posedge reset) begin
if (reset) begin
mem_used[i] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[i] <= mem_used[i-1];
else if (read)
mem_used[i] <= mem_used[i+1];
end
end
end
end
end
endgenerate
// --------------------------------------------------
// Memory FIFO Status Management
//
// Generates the full and empty signals from the
// pointers. The FIFO is full when the next write
// pointer will be equal to the read pointer after
// a write. Reading from a FIFO clears full.
//
// The FIFO is empty when the next read pointer will
// be equal to the write pointer after a read. Writing
// to a FIFO clears empty.
//
// A simultaneous read and write must not change any of
// the empty or full flags unless there is a drop on error event.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk13
always @* begin
next_full = full;
next_empty = empty;
if (read && !write) begin
next_full = 1'b0;
if (incremented_rd_ptr == wr_ptr)
next_empty = 1'b1;
end
if (write && !read) begin
if (!drop_on_error)
next_empty = 1'b0;
else if (curr_sop_ptr == rd_ptr) // drop on error and only 1 pkt in fifo
next_empty = 1'b1;
if (incremented_wr_ptr == rd_ptr && !drop_on_error)
next_full = 1'b1;
end
if (write && read && drop_on_error) begin
if (curr_sop_ptr == next_rd_ptr)
next_empty = 1'b1;
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
empty <= 1;
full <= 0;
end
else begin
empty <= next_empty;
full <= next_full;
end
end
end else begin : gen_blk13_else
// --------------------------------------------------
// Register FIFO Status Management
//
// Full when the tail occupancy bit is 1. Empty when
// the head occupancy bit is 0.
// --------------------------------------------------
always @* begin
full = mem_used[DEPTH-1];
empty = !mem_used[0];
// ------------------------------------------
// For a single slot FIFO, reading clears the
// full status immediately.
// ------------------------------------------
if (DEPTH == 1)
full = mem_used[0] && !read;
internal_out_payload = mem[0];
// ------------------------------------------
// Writes clear empty immediately for lookahead modes.
// Note that we use in_valid instead of write to avoid
// combinational loops (in lookahead mode, qualifying
// with in_ready is meaningless).
//
// In a 1-deep FIFO, a possible combinational loop runs
// from write -> out_valid -> out_ready -> write
// ------------------------------------------
if (EMPTY_LATENCY == 0) begin
empty = !mem_used[0] && !in_valid;
if (!mem_used[0] && in_valid)
internal_out_payload = in_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Avalon-ST Signals
//
// The in_ready signal is straightforward.
//
// To match memory latency when empty latency > 1,
// out_valid assertions must be delayed by one clock
// cycle.
//
// Note: out_valid deassertions must not be delayed or
// the FIFO will underflow.
// --------------------------------------------------
assign in_ready = !full;
assign internal_out_ready = out_ready || !out_valid;
generate if (EMPTY_LATENCY > 1) begin : gen_blk14
always @(posedge clk or posedge reset) begin
if (reset)
internal_out_valid <= 0;
else begin
internal_out_valid <= !empty & ok_to_forward & ~drop_on_error;
if (read) begin
if (incremented_rd_ptr == wr_ptr)
internal_out_valid <= 1'b0;
end
end
end
end else begin : gen_blk14_else
always @* begin
internal_out_valid = !empty & ok_to_forward;
end
end
endgenerate
// --------------------------------------------------
// Single Output Pipeline Stage
//
// This output pipeline stage is enabled if the FIFO's
// empty latency is set to 3 (default). It is disabled
// for all other allowed latencies.
//
// Reason: The memory outputs are unregistered, so we have to
// register the output or fmax will drop if combinatorial
// logic is present on the output datapath.
//
// Q: The Avalon-ST spec says that I have to register my outputs
// But isn't the memory counted as a register?
// A: The path from the address lookup to the memory output is
// slow. Registering the memory outputs is a good idea.
//
// The registers get packed into the memory by the fitter
// which means minimal resources are consumed (the result
// is a altsyncram with registered outputs, available on
// all modern Altera devices).
//
// This output stage acts as an extra slot in the FIFO,
// and complicates the fill level.
// --------------------------------------------------
generate if (EMPTY_LATENCY == 3) begin : gen_blk15
always @(posedge clk or posedge reset) begin
if (reset) begin
out_valid <= 0;
out_payload <= 0;
end
else begin
if (internal_out_ready) begin
out_valid <= internal_out_valid & ok_to_forward;
out_payload <= internal_out_payload;
end
end
end
end
else begin : gen_blk15_else
always @* begin
out_valid = internal_out_valid;
out_payload = internal_out_payload;
end
end
endgenerate
// --------------------------------------------------
// Fill Level
//
// The fill level is calculated from the next write
// and read pointers to avoid unnecessary latency
// and logic.
//
// However, if the store-and-forward mode of the FIFO
// is enabled, the fill level is an up-down counter
// for fmax optimization reasons.
//
// If the output pipeline is enabled, the fill level
// must account for it, or we'll always be off by one.
// This may, or may not be important depending on the
// application.
//
// For now, we'll always calculate the exact fill level
// at the cost of an extra adder when the output stage
// is enabled.
// --------------------------------------------------
generate if (USE_FILL_LEVEL) begin : gen_blk16
wire [31:0] depth32;
assign depth32 = DEPTH;
if (USE_STORE_FORWARD) begin
reg [ADDR_WIDTH : 0] curr_packet_len_less_one;
// --------------------------------------------------
// We only drop on endofpacket. As long as we don't add to the fill
// level on the dropped endofpacket cycle, we can simply subtract
// (packet length - 1) from the fill level for dropped packets.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
curr_packet_len_less_one <= 0;
end else begin
if (write) begin
curr_packet_len_less_one <= curr_packet_len_less_one + 1'b1;
if (in_endofpacket)
curr_packet_len_less_one <= 0;
end
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
fifo_fill_level <= 0;
end else if (drop_on_error) begin
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one;
if (read)
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one - 1'b1;
end else if (write && !read) begin
fifo_fill_level <= fifo_fill_level + 1'b1;
end else if (read && !write) begin
fifo_fill_level <= fifo_fill_level - 1'b1;
end
end
end else begin
always @(posedge clk or posedge reset) begin
if (reset)
fifo_fill_level <= 0;
else if (next_full & !drop_on_error)
fifo_fill_level <= depth32[ADDR_WIDTH:0];
else begin
fifo_fill_level[ADDR_WIDTH] <= 1'b0;
fifo_fill_level[ADDR_WIDTH-1 : 0] <= next_wr_ptr - next_rd_ptr;
end
end
end
always @* begin
fill_level = fifo_fill_level;
if (EMPTY_LATENCY == 3)
fill_level = fifo_fill_level + {{ADDR_WIDTH{1'b0}}, out_valid};
end
end
else begin : gen_blk16_else
always @* begin
fill_level = 0;
end
end
endgenerate
generate if (USE_ALMOST_FULL_IF) begin : gen_blk17
assign almost_full_data = (fill_level >= almost_full_threshold);
end
else
assign almost_full_data = 0;
endgenerate
generate if (USE_ALMOST_EMPTY_IF) begin : gen_blk18
assign almost_empty_data = (fill_level <= almost_empty_threshold);
end
else
assign almost_empty_data = 0;
endgenerate
// --------------------------------------------------
// Avalon-MM Status & Control Connection Point
//
// Register map:
//
// | Addr | RW | 31 - 0 |
// | 0 | R | Fill level |
//
// The registering of this connection point means
// that there is a cycle of latency between
// reads/writes and the updating of the fill level.
// --------------------------------------------------
generate if (USE_STORE_FORWARD) begin : gen_blk19
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
cut_through_threshold <= 0;
drop_on_error_en <= 0;
csr_readdata <= 0;
pkt_mode <= 1'b1;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 5)
csr_readdata <= {31'b0, drop_on_error_en};
else if (csr_address == 4)
csr_readdata <= {8'b0, cut_through_threshold};
else if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b101)
drop_on_error_en <= csr_writedata[0];
else if(csr_address == 3'b100) begin
cut_through_threshold <= csr_writedata[23:0];
pkt_mode <= (csr_writedata[23:0] == 0);
end
else if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else if (USE_ALMOST_FULL_IF || USE_ALMOST_EMPTY_IF) begin : gen_blk19_else1
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
csr_readdata <= 0;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else begin : gen_blk19_else2
always @(posedge clk or posedge reset) begin
if (reset) begin
csr_readdata <= 0;
end
else if (csr_read) begin
csr_readdata <= 0;
if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
end
end
endgenerate
// --------------------------------------------------
// Store and forward logic
// --------------------------------------------------
// if the fifo gets full before the entire packet or the
// cut-threshold condition is met then start sending out
// data in order to avoid dead-lock situation
generate if (USE_STORE_FORWARD) begin : gen_blk20
assign wait_for_threshold = (fifo_fill_level_lt_cut_through_threshold) & wait_for_pkt ;
assign wait_for_pkt = pkt_cnt_eq_zero | (pkt_cnt_eq_one & out_pkt_leave);
assign ok_to_forward = (pkt_mode ? (~wait_for_pkt | ~pkt_has_started) :
~wait_for_threshold) | fifo_too_small_r;
assign in_pkt_eop_arrive = in_valid & in_ready & in_endofpacket;
assign in_pkt_start = in_valid & in_ready & in_startofpacket;
assign in_pkt_error = in_valid & in_ready & |in_error;
assign out_pkt_sop_leave = out_valid & out_ready & out_startofpacket;
assign out_pkt_leave = out_valid & out_ready & out_endofpacket;
assign fifo_too_small = (pkt_mode ? wait_for_pkt : wait_for_threshold) & full & out_ready;
// count packets coming and going into the fifo
always @(posedge clk or posedge reset) begin
if (reset) begin
pkt_cnt <= 0;
pkt_has_started <= 0;
sop_has_left_fifo <= 0;
fifo_too_small_r <= 0;
pkt_cnt_eq_zero <= 1'b1;
pkt_cnt_eq_one <= 1'b0;
fifo_fill_level_lt_cut_through_threshold <= 1'b1;
end
else begin
fifo_fill_level_lt_cut_through_threshold <= fifo_fill_level < cut_through_threshold;
fifo_too_small_r <= fifo_too_small;
if( in_pkt_eop_arrive )
sop_has_left_fifo <= 1'b0;
else if (out_pkt_sop_leave & pkt_cnt_eq_zero )
sop_has_left_fifo <= 1'b1;
if (in_pkt_eop_arrive & ~out_pkt_leave & ~drop_on_error ) begin
pkt_cnt <= pkt_cnt + 1'b1;
pkt_cnt_eq_zero <= 0;
if (pkt_cnt == 0)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
else if((~in_pkt_eop_arrive | drop_on_error) & out_pkt_leave) begin
pkt_cnt <= pkt_cnt - 1'b1;
if (pkt_cnt == 1)
pkt_cnt_eq_zero <= 1'b1;
else
pkt_cnt_eq_zero <= 1'b0;
if (pkt_cnt == 2)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
if (in_pkt_start)
pkt_has_started <= 1'b1;
else if (in_pkt_eop_arrive)
pkt_has_started <= 1'b0;
end
end
// drop on error logic
always @(posedge clk or posedge reset) begin
if (reset) begin
sop_ptr <= 0;
error_in_pkt <= 0;
end
else begin
// save the location of the SOP
if ( in_pkt_start )
sop_ptr <= wr_ptr;
// remember if error in pkt
// log error only if packet has already started
if (in_pkt_eop_arrive)
error_in_pkt <= 1'b0;
else if ( in_pkt_error & (pkt_has_started | in_pkt_start))
error_in_pkt <= 1'b1;
end
end
assign drop_on_error = drop_on_error_en & (error_in_pkt | in_pkt_error) & in_pkt_eop_arrive &
~sop_has_left_fifo & ~(out_pkt_sop_leave & pkt_cnt_eq_zero);
assign curr_sop_ptr = (write && in_startofpacket && in_endofpacket) ? wr_ptr : sop_ptr;
end
else begin : gen_blk20_else
assign ok_to_forward = 1'b1;
assign drop_on_error = 1'b0;
if (ADDR_WIDTH <= 1)
assign curr_sop_ptr = 1'b0;
else
assign curr_sop_ptr = {ADDR_WIDTH - 1 { 1'b0 }};
end
endgenerate
// --------------------------------------------------
// Calculates the log2ceil of the input value
// --------------------------------------------------
function integer log2ceil;
input integer val;
reg[31:0] i;
begin
i = 1;
log2ceil = 0;
while (i < val) begin
log2ceil = log2ceil + 1;
i = i[30:0] << 1;
end
end
endfunction
endmodule
|
// -----------------------------------------------------------
// Legal Notice: (C)2007 Altera Corporation. All rights reserved. Your
// use of Altera Corporation's design tools, logic functions and other
// software and tools, and its AMPP partner logic functions, and any
// output files any of the foregoing (including device programming or
// simulation files), and any associated documentation or information are
// expressly subject to the terms and conditions of the Altera Program
// License Subscription Agreement or other applicable license agreement,
// including, without limitation, that your use is for the sole purpose
// of programming logic devices manufactured by Altera and sold by Altera
// or its authorized distributors. Please refer to the applicable
// agreement for further details.
//
// Description: Single clock Avalon-ST FIFO.
// -----------------------------------------------------------
`timescale 1 ns / 1 ns
//altera message_off 10036
module altera_avalon_sc_fifo
#(
// --------------------------------------------------
// Parameters
// --------------------------------------------------
parameter SYMBOLS_PER_BEAT = 1,
parameter BITS_PER_SYMBOL = 8,
parameter FIFO_DEPTH = 16,
parameter CHANNEL_WIDTH = 0,
parameter ERROR_WIDTH = 0,
parameter USE_PACKETS = 0,
parameter USE_FILL_LEVEL = 0,
parameter USE_STORE_FORWARD = 0,
parameter USE_ALMOST_FULL_IF = 0,
parameter USE_ALMOST_EMPTY_IF = 0,
// --------------------------------------------------
// Empty latency is defined as the number of cycles
// required for a write to deassert the empty flag.
// For example, a latency of 1 means that the empty
// flag is deasserted on the cycle after a write.
//
// Another way to think of it is the latency for a
// write to propagate to the output.
//
// An empty latency of 0 implies lookahead, which is
// only implemented for the register-based FIFO.
// --------------------------------------------------
parameter EMPTY_LATENCY = 3,
parameter USE_MEMORY_BLOCKS = 1,
// --------------------------------------------------
// Internal Parameters
// --------------------------------------------------
parameter DATA_WIDTH = SYMBOLS_PER_BEAT * BITS_PER_SYMBOL,
parameter EMPTY_WIDTH = log2ceil(SYMBOLS_PER_BEAT)
)
(
// --------------------------------------------------
// Ports
// --------------------------------------------------
input clk,
input reset,
input [DATA_WIDTH-1: 0] in_data,
input in_valid,
input in_startofpacket,
input in_endofpacket,
input [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] in_empty,
input [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] in_error,
input [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] in_channel,
output in_ready,
output [DATA_WIDTH-1 : 0] out_data,
output reg out_valid,
output out_startofpacket,
output out_endofpacket,
output [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] out_empty,
output [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] out_error,
output [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] out_channel,
input out_ready,
input [(USE_STORE_FORWARD ? 2 : 1) : 0] csr_address,
input csr_write,
input csr_read,
input [31 : 0] csr_writedata,
output reg [31 : 0] csr_readdata,
output wire almost_full_data,
output wire almost_empty_data
);
// --------------------------------------------------
// Local Parameters
// --------------------------------------------------
localparam ADDR_WIDTH = log2ceil(FIFO_DEPTH);
localparam DEPTH = FIFO_DEPTH;
localparam PKT_SIGNALS_WIDTH = 2 + EMPTY_WIDTH;
localparam PAYLOAD_WIDTH = (USE_PACKETS == 1) ?
2 + EMPTY_WIDTH + DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH:
DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH;
// --------------------------------------------------
// Internal Signals
// --------------------------------------------------
genvar i;
reg [PAYLOAD_WIDTH-1 : 0] mem [DEPTH-1 : 0];
reg [ADDR_WIDTH-1 : 0] wr_ptr;
reg [ADDR_WIDTH-1 : 0] rd_ptr;
reg [DEPTH-1 : 0] mem_used;
wire [ADDR_WIDTH-1 : 0] next_wr_ptr;
wire [ADDR_WIDTH-1 : 0] next_rd_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_wr_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_rd_ptr;
wire [ADDR_WIDTH-1 : 0] mem_rd_ptr;
wire read;
wire write;
reg empty;
reg next_empty;
reg full;
reg next_full;
wire [PKT_SIGNALS_WIDTH-1 : 0] in_packet_signals;
wire [PKT_SIGNALS_WIDTH-1 : 0] out_packet_signals;
wire [PAYLOAD_WIDTH-1 : 0] in_payload;
reg [PAYLOAD_WIDTH-1 : 0] internal_out_payload;
reg [PAYLOAD_WIDTH-1 : 0] out_payload;
reg internal_out_valid;
wire internal_out_ready;
reg [ADDR_WIDTH : 0] fifo_fill_level;
reg [ADDR_WIDTH : 0] fill_level;
reg [ADDR_WIDTH-1 : 0] sop_ptr = 0;
wire [ADDR_WIDTH-1 : 0] curr_sop_ptr;
reg [23:0] almost_full_threshold;
reg [23:0] almost_empty_threshold;
reg [23:0] cut_through_threshold;
reg [15:0] pkt_cnt;
reg drop_on_error_en;
reg error_in_pkt;
reg pkt_has_started;
reg sop_has_left_fifo;
reg fifo_too_small_r;
reg pkt_cnt_eq_zero;
reg pkt_cnt_eq_one;
wire wait_for_threshold;
reg pkt_mode;
wire wait_for_pkt;
wire ok_to_forward;
wire in_pkt_eop_arrive;
wire out_pkt_leave;
wire in_pkt_start;
wire in_pkt_error;
wire drop_on_error;
wire fifo_too_small;
wire out_pkt_sop_leave;
wire [31:0] max_fifo_size;
reg fifo_fill_level_lt_cut_through_threshold;
// --------------------------------------------------
// Define Payload
//
// Icky part where we decide which signals form the
// payload to the FIFO with generate blocks.
// --------------------------------------------------
generate
if (EMPTY_WIDTH > 0) begin : gen_blk1
assign in_packet_signals = {in_startofpacket, in_endofpacket, in_empty};
assign {out_startofpacket, out_endofpacket, out_empty} = out_packet_signals;
end
else begin : gen_blk1_else
assign out_empty = in_error;
assign in_packet_signals = {in_startofpacket, in_endofpacket};
assign {out_startofpacket, out_endofpacket} = out_packet_signals;
end
endgenerate
generate
if (USE_PACKETS) begin : gen_blk2
if (ERROR_WIDTH > 0) begin : gen_blk3
if (CHANNEL_WIDTH > 0) begin : gen_blk4
assign in_payload = {in_packet_signals, in_data, in_error, in_channel};
assign {out_packet_signals, out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk4_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data, in_error};
assign {out_packet_signals, out_data, out_error} = out_payload;
end
end
else begin : gen_blk3_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk5
assign in_payload = {in_packet_signals, in_data, in_channel};
assign {out_packet_signals, out_data, out_channel} = out_payload;
end
else begin : gen_blk5_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data};
assign {out_packet_signals, out_data} = out_payload;
end
end
end
else begin : gen_blk2_else
assign out_packet_signals = 0;
if (ERROR_WIDTH > 0) begin : gen_blk6
if (CHANNEL_WIDTH > 0) begin : gen_blk7
assign in_payload = {in_data, in_error, in_channel};
assign {out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk7_else
assign out_channel = in_channel;
assign in_payload = {in_data, in_error};
assign {out_data, out_error} = out_payload;
end
end
else begin : gen_blk6_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk8
assign in_payload = {in_data, in_channel};
assign {out_data, out_channel} = out_payload;
end
else begin : gen_blk8_else
assign out_channel = in_channel;
assign in_payload = in_data;
assign out_data = out_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Memory-based FIFO storage
//
// To allow a ready latency of 0, the read index is
// obtained from the next read pointer and memory
// outputs are unregistered.
//
// If the empty latency is 1, we infer bypass logic
// around the memory so writes propagate to the
// outputs on the next cycle.
//
// Do not change the way this is coded: Quartus needs
// a perfect match to the template, and any attempt to
// refactor the two always blocks into one will break
// memory inference.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk9
if (EMPTY_LATENCY == 1) begin : gen_blk10
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] = in_payload;
internal_out_payload = mem[mem_rd_ptr];
end
end else begin : gen_blk10_else
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] <= in_payload;
internal_out_payload <= mem[mem_rd_ptr];
end
end
assign mem_rd_ptr = next_rd_ptr;
end else begin : gen_blk9_else
// --------------------------------------------------
// Register-based FIFO storage
//
// Uses a shift register as the storage element. Each
// shift register slot has a bit which indicates if
// the slot is occupied (credit to Sam H for the idea).
// The occupancy bits are contiguous and start from the
// lsb, so 0000, 0001, 0011, 0111, 1111 for a 4-deep
// FIFO.
//
// Each slot is enabled during a read or when it
// is unoccupied. New data is always written to every
// going-to-be-empty slot (we keep track of which ones
// are actually useful with the occupancy bits). On a
// read we shift occupied slots.
//
// The exception is the last slot, which always gets
// new data when it is unoccupied.
// --------------------------------------------------
for (i = 0; i < DEPTH-1; i = i + 1) begin : shift_reg
always @(posedge clk or posedge reset) begin
if (reset) begin
mem[i] <= 0;
end
else if (read || !mem_used[i]) begin
if (!mem_used[i+1])
mem[i] <= in_payload;
else
mem[i] <= mem[i+1];
end
end
end
always @(posedge clk, posedge reset) begin
if (reset) begin
mem[DEPTH-1] <= 0;
end
else begin
if (DEPTH == 1) begin
if (write)
mem[DEPTH-1] <= in_payload;
end
else if (!mem_used[DEPTH-1])
mem[DEPTH-1] <= in_payload;
end
end
end
endgenerate
assign read = internal_out_ready && internal_out_valid && ok_to_forward;
assign write = in_ready && in_valid;
// --------------------------------------------------
// Pointer Management
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk11
assign incremented_wr_ptr = wr_ptr + 1'b1;
assign incremented_rd_ptr = rd_ptr + 1'b1;
assign next_wr_ptr = drop_on_error ? curr_sop_ptr : write ? incremented_wr_ptr : wr_ptr;
assign next_rd_ptr = (read) ? incremented_rd_ptr : rd_ptr;
always @(posedge clk or posedge reset) begin
if (reset) begin
wr_ptr <= 0;
rd_ptr <= 0;
end
else begin
wr_ptr <= next_wr_ptr;
rd_ptr <= next_rd_ptr;
end
end
end else begin : gen_blk11_else
// --------------------------------------------------
// Shift Register Occupancy Bits
//
// Consider a 4-deep FIFO with 2 entries: 0011
// On a read and write, do not modify the bits.
// On a write, left-shift the bits to get 0111.
// On a read, right-shift the bits to get 0001.
//
// Also, on a write we set bit0 (the head), while
// clearing the tail on a read.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[0] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[0] <= 1;
else if (read) begin
if (DEPTH > 1)
mem_used[0] <= mem_used[1];
else
mem_used[0] <= 0;
end
end
end
end
if (DEPTH > 1) begin : gen_blk12
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[DEPTH-1] <= 0;
end
else begin
if (write ^ read) begin
mem_used[DEPTH-1] <= 0;
if (write)
mem_used[DEPTH-1] <= mem_used[DEPTH-2];
end
end
end
end
for (i = 1; i < DEPTH-1; i = i + 1) begin : storage_logic
always @(posedge clk, posedge reset) begin
if (reset) begin
mem_used[i] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[i] <= mem_used[i-1];
else if (read)
mem_used[i] <= mem_used[i+1];
end
end
end
end
end
endgenerate
// --------------------------------------------------
// Memory FIFO Status Management
//
// Generates the full and empty signals from the
// pointers. The FIFO is full when the next write
// pointer will be equal to the read pointer after
// a write. Reading from a FIFO clears full.
//
// The FIFO is empty when the next read pointer will
// be equal to the write pointer after a read. Writing
// to a FIFO clears empty.
//
// A simultaneous read and write must not change any of
// the empty or full flags unless there is a drop on error event.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk13
always @* begin
next_full = full;
next_empty = empty;
if (read && !write) begin
next_full = 1'b0;
if (incremented_rd_ptr == wr_ptr)
next_empty = 1'b1;
end
if (write && !read) begin
if (!drop_on_error)
next_empty = 1'b0;
else if (curr_sop_ptr == rd_ptr) // drop on error and only 1 pkt in fifo
next_empty = 1'b1;
if (incremented_wr_ptr == rd_ptr && !drop_on_error)
next_full = 1'b1;
end
if (write && read && drop_on_error) begin
if (curr_sop_ptr == next_rd_ptr)
next_empty = 1'b1;
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
empty <= 1;
full <= 0;
end
else begin
empty <= next_empty;
full <= next_full;
end
end
end else begin : gen_blk13_else
// --------------------------------------------------
// Register FIFO Status Management
//
// Full when the tail occupancy bit is 1. Empty when
// the head occupancy bit is 0.
// --------------------------------------------------
always @* begin
full = mem_used[DEPTH-1];
empty = !mem_used[0];
// ------------------------------------------
// For a single slot FIFO, reading clears the
// full status immediately.
// ------------------------------------------
if (DEPTH == 1)
full = mem_used[0] && !read;
internal_out_payload = mem[0];
// ------------------------------------------
// Writes clear empty immediately for lookahead modes.
// Note that we use in_valid instead of write to avoid
// combinational loops (in lookahead mode, qualifying
// with in_ready is meaningless).
//
// In a 1-deep FIFO, a possible combinational loop runs
// from write -> out_valid -> out_ready -> write
// ------------------------------------------
if (EMPTY_LATENCY == 0) begin
empty = !mem_used[0] && !in_valid;
if (!mem_used[0] && in_valid)
internal_out_payload = in_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Avalon-ST Signals
//
// The in_ready signal is straightforward.
//
// To match memory latency when empty latency > 1,
// out_valid assertions must be delayed by one clock
// cycle.
//
// Note: out_valid deassertions must not be delayed or
// the FIFO will underflow.
// --------------------------------------------------
assign in_ready = !full;
assign internal_out_ready = out_ready || !out_valid;
generate if (EMPTY_LATENCY > 1) begin : gen_blk14
always @(posedge clk or posedge reset) begin
if (reset)
internal_out_valid <= 0;
else begin
internal_out_valid <= !empty & ok_to_forward & ~drop_on_error;
if (read) begin
if (incremented_rd_ptr == wr_ptr)
internal_out_valid <= 1'b0;
end
end
end
end else begin : gen_blk14_else
always @* begin
internal_out_valid = !empty & ok_to_forward;
end
end
endgenerate
// --------------------------------------------------
// Single Output Pipeline Stage
//
// This output pipeline stage is enabled if the FIFO's
// empty latency is set to 3 (default). It is disabled
// for all other allowed latencies.
//
// Reason: The memory outputs are unregistered, so we have to
// register the output or fmax will drop if combinatorial
// logic is present on the output datapath.
//
// Q: The Avalon-ST spec says that I have to register my outputs
// But isn't the memory counted as a register?
// A: The path from the address lookup to the memory output is
// slow. Registering the memory outputs is a good idea.
//
// The registers get packed into the memory by the fitter
// which means minimal resources are consumed (the result
// is a altsyncram with registered outputs, available on
// all modern Altera devices).
//
// This output stage acts as an extra slot in the FIFO,
// and complicates the fill level.
// --------------------------------------------------
generate if (EMPTY_LATENCY == 3) begin : gen_blk15
always @(posedge clk or posedge reset) begin
if (reset) begin
out_valid <= 0;
out_payload <= 0;
end
else begin
if (internal_out_ready) begin
out_valid <= internal_out_valid & ok_to_forward;
out_payload <= internal_out_payload;
end
end
end
end
else begin : gen_blk15_else
always @* begin
out_valid = internal_out_valid;
out_payload = internal_out_payload;
end
end
endgenerate
// --------------------------------------------------
// Fill Level
//
// The fill level is calculated from the next write
// and read pointers to avoid unnecessary latency
// and logic.
//
// However, if the store-and-forward mode of the FIFO
// is enabled, the fill level is an up-down counter
// for fmax optimization reasons.
//
// If the output pipeline is enabled, the fill level
// must account for it, or we'll always be off by one.
// This may, or may not be important depending on the
// application.
//
// For now, we'll always calculate the exact fill level
// at the cost of an extra adder when the output stage
// is enabled.
// --------------------------------------------------
generate if (USE_FILL_LEVEL) begin : gen_blk16
wire [31:0] depth32;
assign depth32 = DEPTH;
if (USE_STORE_FORWARD) begin
reg [ADDR_WIDTH : 0] curr_packet_len_less_one;
// --------------------------------------------------
// We only drop on endofpacket. As long as we don't add to the fill
// level on the dropped endofpacket cycle, we can simply subtract
// (packet length - 1) from the fill level for dropped packets.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
curr_packet_len_less_one <= 0;
end else begin
if (write) begin
curr_packet_len_less_one <= curr_packet_len_less_one + 1'b1;
if (in_endofpacket)
curr_packet_len_less_one <= 0;
end
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
fifo_fill_level <= 0;
end else if (drop_on_error) begin
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one;
if (read)
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one - 1'b1;
end else if (write && !read) begin
fifo_fill_level <= fifo_fill_level + 1'b1;
end else if (read && !write) begin
fifo_fill_level <= fifo_fill_level - 1'b1;
end
end
end else begin
always @(posedge clk or posedge reset) begin
if (reset)
fifo_fill_level <= 0;
else if (next_full & !drop_on_error)
fifo_fill_level <= depth32[ADDR_WIDTH:0];
else begin
fifo_fill_level[ADDR_WIDTH] <= 1'b0;
fifo_fill_level[ADDR_WIDTH-1 : 0] <= next_wr_ptr - next_rd_ptr;
end
end
end
always @* begin
fill_level = fifo_fill_level;
if (EMPTY_LATENCY == 3)
fill_level = fifo_fill_level + {{ADDR_WIDTH{1'b0}}, out_valid};
end
end
else begin : gen_blk16_else
always @* begin
fill_level = 0;
end
end
endgenerate
generate if (USE_ALMOST_FULL_IF) begin : gen_blk17
assign almost_full_data = (fill_level >= almost_full_threshold);
end
else
assign almost_full_data = 0;
endgenerate
generate if (USE_ALMOST_EMPTY_IF) begin : gen_blk18
assign almost_empty_data = (fill_level <= almost_empty_threshold);
end
else
assign almost_empty_data = 0;
endgenerate
// --------------------------------------------------
// Avalon-MM Status & Control Connection Point
//
// Register map:
//
// | Addr | RW | 31 - 0 |
// | 0 | R | Fill level |
//
// The registering of this connection point means
// that there is a cycle of latency between
// reads/writes and the updating of the fill level.
// --------------------------------------------------
generate if (USE_STORE_FORWARD) begin : gen_blk19
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
cut_through_threshold <= 0;
drop_on_error_en <= 0;
csr_readdata <= 0;
pkt_mode <= 1'b1;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 5)
csr_readdata <= {31'b0, drop_on_error_en};
else if (csr_address == 4)
csr_readdata <= {8'b0, cut_through_threshold};
else if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b101)
drop_on_error_en <= csr_writedata[0];
else if(csr_address == 3'b100) begin
cut_through_threshold <= csr_writedata[23:0];
pkt_mode <= (csr_writedata[23:0] == 0);
end
else if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else if (USE_ALMOST_FULL_IF || USE_ALMOST_EMPTY_IF) begin : gen_blk19_else1
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
csr_readdata <= 0;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else begin : gen_blk19_else2
always @(posedge clk or posedge reset) begin
if (reset) begin
csr_readdata <= 0;
end
else if (csr_read) begin
csr_readdata <= 0;
if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
end
end
endgenerate
// --------------------------------------------------
// Store and forward logic
// --------------------------------------------------
// if the fifo gets full before the entire packet or the
// cut-threshold condition is met then start sending out
// data in order to avoid dead-lock situation
generate if (USE_STORE_FORWARD) begin : gen_blk20
assign wait_for_threshold = (fifo_fill_level_lt_cut_through_threshold) & wait_for_pkt ;
assign wait_for_pkt = pkt_cnt_eq_zero | (pkt_cnt_eq_one & out_pkt_leave);
assign ok_to_forward = (pkt_mode ? (~wait_for_pkt | ~pkt_has_started) :
~wait_for_threshold) | fifo_too_small_r;
assign in_pkt_eop_arrive = in_valid & in_ready & in_endofpacket;
assign in_pkt_start = in_valid & in_ready & in_startofpacket;
assign in_pkt_error = in_valid & in_ready & |in_error;
assign out_pkt_sop_leave = out_valid & out_ready & out_startofpacket;
assign out_pkt_leave = out_valid & out_ready & out_endofpacket;
assign fifo_too_small = (pkt_mode ? wait_for_pkt : wait_for_threshold) & full & out_ready;
// count packets coming and going into the fifo
always @(posedge clk or posedge reset) begin
if (reset) begin
pkt_cnt <= 0;
pkt_has_started <= 0;
sop_has_left_fifo <= 0;
fifo_too_small_r <= 0;
pkt_cnt_eq_zero <= 1'b1;
pkt_cnt_eq_one <= 1'b0;
fifo_fill_level_lt_cut_through_threshold <= 1'b1;
end
else begin
fifo_fill_level_lt_cut_through_threshold <= fifo_fill_level < cut_through_threshold;
fifo_too_small_r <= fifo_too_small;
if( in_pkt_eop_arrive )
sop_has_left_fifo <= 1'b0;
else if (out_pkt_sop_leave & pkt_cnt_eq_zero )
sop_has_left_fifo <= 1'b1;
if (in_pkt_eop_arrive & ~out_pkt_leave & ~drop_on_error ) begin
pkt_cnt <= pkt_cnt + 1'b1;
pkt_cnt_eq_zero <= 0;
if (pkt_cnt == 0)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
else if((~in_pkt_eop_arrive | drop_on_error) & out_pkt_leave) begin
pkt_cnt <= pkt_cnt - 1'b1;
if (pkt_cnt == 1)
pkt_cnt_eq_zero <= 1'b1;
else
pkt_cnt_eq_zero <= 1'b0;
if (pkt_cnt == 2)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
if (in_pkt_start)
pkt_has_started <= 1'b1;
else if (in_pkt_eop_arrive)
pkt_has_started <= 1'b0;
end
end
// drop on error logic
always @(posedge clk or posedge reset) begin
if (reset) begin
sop_ptr <= 0;
error_in_pkt <= 0;
end
else begin
// save the location of the SOP
if ( in_pkt_start )
sop_ptr <= wr_ptr;
// remember if error in pkt
// log error only if packet has already started
if (in_pkt_eop_arrive)
error_in_pkt <= 1'b0;
else if ( in_pkt_error & (pkt_has_started | in_pkt_start))
error_in_pkt <= 1'b1;
end
end
assign drop_on_error = drop_on_error_en & (error_in_pkt | in_pkt_error) & in_pkt_eop_arrive &
~sop_has_left_fifo & ~(out_pkt_sop_leave & pkt_cnt_eq_zero);
assign curr_sop_ptr = (write && in_startofpacket && in_endofpacket) ? wr_ptr : sop_ptr;
end
else begin : gen_blk20_else
assign ok_to_forward = 1'b1;
assign drop_on_error = 1'b0;
if (ADDR_WIDTH <= 1)
assign curr_sop_ptr = 1'b0;
else
assign curr_sop_ptr = {ADDR_WIDTH - 1 { 1'b0 }};
end
endgenerate
// --------------------------------------------------
// Calculates the log2ceil of the input value
// --------------------------------------------------
function integer log2ceil;
input integer val;
reg[31:0] i;
begin
i = 1;
log2ceil = 0;
while (i < val) begin
log2ceil = log2ceil + 1;
i = i[30:0] << 1;
end
end
endfunction
endmodule
|
// -----------------------------------------------------------
// Legal Notice: (C)2007 Altera Corporation. All rights reserved. Your
// use of Altera Corporation's design tools, logic functions and other
// software and tools, and its AMPP partner logic functions, and any
// output files any of the foregoing (including device programming or
// simulation files), and any associated documentation or information are
// expressly subject to the terms and conditions of the Altera Program
// License Subscription Agreement or other applicable license agreement,
// including, without limitation, that your use is for the sole purpose
// of programming logic devices manufactured by Altera and sold by Altera
// or its authorized distributors. Please refer to the applicable
// agreement for further details.
//
// Description: Single clock Avalon-ST FIFO.
// -----------------------------------------------------------
`timescale 1 ns / 1 ns
//altera message_off 10036
module altera_avalon_sc_fifo
#(
// --------------------------------------------------
// Parameters
// --------------------------------------------------
parameter SYMBOLS_PER_BEAT = 1,
parameter BITS_PER_SYMBOL = 8,
parameter FIFO_DEPTH = 16,
parameter CHANNEL_WIDTH = 0,
parameter ERROR_WIDTH = 0,
parameter USE_PACKETS = 0,
parameter USE_FILL_LEVEL = 0,
parameter USE_STORE_FORWARD = 0,
parameter USE_ALMOST_FULL_IF = 0,
parameter USE_ALMOST_EMPTY_IF = 0,
// --------------------------------------------------
// Empty latency is defined as the number of cycles
// required for a write to deassert the empty flag.
// For example, a latency of 1 means that the empty
// flag is deasserted on the cycle after a write.
//
// Another way to think of it is the latency for a
// write to propagate to the output.
//
// An empty latency of 0 implies lookahead, which is
// only implemented for the register-based FIFO.
// --------------------------------------------------
parameter EMPTY_LATENCY = 3,
parameter USE_MEMORY_BLOCKS = 1,
// --------------------------------------------------
// Internal Parameters
// --------------------------------------------------
parameter DATA_WIDTH = SYMBOLS_PER_BEAT * BITS_PER_SYMBOL,
parameter EMPTY_WIDTH = log2ceil(SYMBOLS_PER_BEAT)
)
(
// --------------------------------------------------
// Ports
// --------------------------------------------------
input clk,
input reset,
input [DATA_WIDTH-1: 0] in_data,
input in_valid,
input in_startofpacket,
input in_endofpacket,
input [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] in_empty,
input [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] in_error,
input [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] in_channel,
output in_ready,
output [DATA_WIDTH-1 : 0] out_data,
output reg out_valid,
output out_startofpacket,
output out_endofpacket,
output [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] out_empty,
output [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] out_error,
output [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] out_channel,
input out_ready,
input [(USE_STORE_FORWARD ? 2 : 1) : 0] csr_address,
input csr_write,
input csr_read,
input [31 : 0] csr_writedata,
output reg [31 : 0] csr_readdata,
output wire almost_full_data,
output wire almost_empty_data
);
// --------------------------------------------------
// Local Parameters
// --------------------------------------------------
localparam ADDR_WIDTH = log2ceil(FIFO_DEPTH);
localparam DEPTH = FIFO_DEPTH;
localparam PKT_SIGNALS_WIDTH = 2 + EMPTY_WIDTH;
localparam PAYLOAD_WIDTH = (USE_PACKETS == 1) ?
2 + EMPTY_WIDTH + DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH:
DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH;
// --------------------------------------------------
// Internal Signals
// --------------------------------------------------
genvar i;
reg [PAYLOAD_WIDTH-1 : 0] mem [DEPTH-1 : 0];
reg [ADDR_WIDTH-1 : 0] wr_ptr;
reg [ADDR_WIDTH-1 : 0] rd_ptr;
reg [DEPTH-1 : 0] mem_used;
wire [ADDR_WIDTH-1 : 0] next_wr_ptr;
wire [ADDR_WIDTH-1 : 0] next_rd_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_wr_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_rd_ptr;
wire [ADDR_WIDTH-1 : 0] mem_rd_ptr;
wire read;
wire write;
reg empty;
reg next_empty;
reg full;
reg next_full;
wire [PKT_SIGNALS_WIDTH-1 : 0] in_packet_signals;
wire [PKT_SIGNALS_WIDTH-1 : 0] out_packet_signals;
wire [PAYLOAD_WIDTH-1 : 0] in_payload;
reg [PAYLOAD_WIDTH-1 : 0] internal_out_payload;
reg [PAYLOAD_WIDTH-1 : 0] out_payload;
reg internal_out_valid;
wire internal_out_ready;
reg [ADDR_WIDTH : 0] fifo_fill_level;
reg [ADDR_WIDTH : 0] fill_level;
reg [ADDR_WIDTH-1 : 0] sop_ptr = 0;
wire [ADDR_WIDTH-1 : 0] curr_sop_ptr;
reg [23:0] almost_full_threshold;
reg [23:0] almost_empty_threshold;
reg [23:0] cut_through_threshold;
reg [15:0] pkt_cnt;
reg drop_on_error_en;
reg error_in_pkt;
reg pkt_has_started;
reg sop_has_left_fifo;
reg fifo_too_small_r;
reg pkt_cnt_eq_zero;
reg pkt_cnt_eq_one;
wire wait_for_threshold;
reg pkt_mode;
wire wait_for_pkt;
wire ok_to_forward;
wire in_pkt_eop_arrive;
wire out_pkt_leave;
wire in_pkt_start;
wire in_pkt_error;
wire drop_on_error;
wire fifo_too_small;
wire out_pkt_sop_leave;
wire [31:0] max_fifo_size;
reg fifo_fill_level_lt_cut_through_threshold;
// --------------------------------------------------
// Define Payload
//
// Icky part where we decide which signals form the
// payload to the FIFO with generate blocks.
// --------------------------------------------------
generate
if (EMPTY_WIDTH > 0) begin : gen_blk1
assign in_packet_signals = {in_startofpacket, in_endofpacket, in_empty};
assign {out_startofpacket, out_endofpacket, out_empty} = out_packet_signals;
end
else begin : gen_blk1_else
assign out_empty = in_error;
assign in_packet_signals = {in_startofpacket, in_endofpacket};
assign {out_startofpacket, out_endofpacket} = out_packet_signals;
end
endgenerate
generate
if (USE_PACKETS) begin : gen_blk2
if (ERROR_WIDTH > 0) begin : gen_blk3
if (CHANNEL_WIDTH > 0) begin : gen_blk4
assign in_payload = {in_packet_signals, in_data, in_error, in_channel};
assign {out_packet_signals, out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk4_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data, in_error};
assign {out_packet_signals, out_data, out_error} = out_payload;
end
end
else begin : gen_blk3_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk5
assign in_payload = {in_packet_signals, in_data, in_channel};
assign {out_packet_signals, out_data, out_channel} = out_payload;
end
else begin : gen_blk5_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data};
assign {out_packet_signals, out_data} = out_payload;
end
end
end
else begin : gen_blk2_else
assign out_packet_signals = 0;
if (ERROR_WIDTH > 0) begin : gen_blk6
if (CHANNEL_WIDTH > 0) begin : gen_blk7
assign in_payload = {in_data, in_error, in_channel};
assign {out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk7_else
assign out_channel = in_channel;
assign in_payload = {in_data, in_error};
assign {out_data, out_error} = out_payload;
end
end
else begin : gen_blk6_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk8
assign in_payload = {in_data, in_channel};
assign {out_data, out_channel} = out_payload;
end
else begin : gen_blk8_else
assign out_channel = in_channel;
assign in_payload = in_data;
assign out_data = out_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Memory-based FIFO storage
//
// To allow a ready latency of 0, the read index is
// obtained from the next read pointer and memory
// outputs are unregistered.
//
// If the empty latency is 1, we infer bypass logic
// around the memory so writes propagate to the
// outputs on the next cycle.
//
// Do not change the way this is coded: Quartus needs
// a perfect match to the template, and any attempt to
// refactor the two always blocks into one will break
// memory inference.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk9
if (EMPTY_LATENCY == 1) begin : gen_blk10
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] = in_payload;
internal_out_payload = mem[mem_rd_ptr];
end
end else begin : gen_blk10_else
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] <= in_payload;
internal_out_payload <= mem[mem_rd_ptr];
end
end
assign mem_rd_ptr = next_rd_ptr;
end else begin : gen_blk9_else
// --------------------------------------------------
// Register-based FIFO storage
//
// Uses a shift register as the storage element. Each
// shift register slot has a bit which indicates if
// the slot is occupied (credit to Sam H for the idea).
// The occupancy bits are contiguous and start from the
// lsb, so 0000, 0001, 0011, 0111, 1111 for a 4-deep
// FIFO.
//
// Each slot is enabled during a read or when it
// is unoccupied. New data is always written to every
// going-to-be-empty slot (we keep track of which ones
// are actually useful with the occupancy bits). On a
// read we shift occupied slots.
//
// The exception is the last slot, which always gets
// new data when it is unoccupied.
// --------------------------------------------------
for (i = 0; i < DEPTH-1; i = i + 1) begin : shift_reg
always @(posedge clk or posedge reset) begin
if (reset) begin
mem[i] <= 0;
end
else if (read || !mem_used[i]) begin
if (!mem_used[i+1])
mem[i] <= in_payload;
else
mem[i] <= mem[i+1];
end
end
end
always @(posedge clk, posedge reset) begin
if (reset) begin
mem[DEPTH-1] <= 0;
end
else begin
if (DEPTH == 1) begin
if (write)
mem[DEPTH-1] <= in_payload;
end
else if (!mem_used[DEPTH-1])
mem[DEPTH-1] <= in_payload;
end
end
end
endgenerate
assign read = internal_out_ready && internal_out_valid && ok_to_forward;
assign write = in_ready && in_valid;
// --------------------------------------------------
// Pointer Management
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk11
assign incremented_wr_ptr = wr_ptr + 1'b1;
assign incremented_rd_ptr = rd_ptr + 1'b1;
assign next_wr_ptr = drop_on_error ? curr_sop_ptr : write ? incremented_wr_ptr : wr_ptr;
assign next_rd_ptr = (read) ? incremented_rd_ptr : rd_ptr;
always @(posedge clk or posedge reset) begin
if (reset) begin
wr_ptr <= 0;
rd_ptr <= 0;
end
else begin
wr_ptr <= next_wr_ptr;
rd_ptr <= next_rd_ptr;
end
end
end else begin : gen_blk11_else
// --------------------------------------------------
// Shift Register Occupancy Bits
//
// Consider a 4-deep FIFO with 2 entries: 0011
// On a read and write, do not modify the bits.
// On a write, left-shift the bits to get 0111.
// On a read, right-shift the bits to get 0001.
//
// Also, on a write we set bit0 (the head), while
// clearing the tail on a read.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[0] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[0] <= 1;
else if (read) begin
if (DEPTH > 1)
mem_used[0] <= mem_used[1];
else
mem_used[0] <= 0;
end
end
end
end
if (DEPTH > 1) begin : gen_blk12
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[DEPTH-1] <= 0;
end
else begin
if (write ^ read) begin
mem_used[DEPTH-1] <= 0;
if (write)
mem_used[DEPTH-1] <= mem_used[DEPTH-2];
end
end
end
end
for (i = 1; i < DEPTH-1; i = i + 1) begin : storage_logic
always @(posedge clk, posedge reset) begin
if (reset) begin
mem_used[i] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[i] <= mem_used[i-1];
else if (read)
mem_used[i] <= mem_used[i+1];
end
end
end
end
end
endgenerate
// --------------------------------------------------
// Memory FIFO Status Management
//
// Generates the full and empty signals from the
// pointers. The FIFO is full when the next write
// pointer will be equal to the read pointer after
// a write. Reading from a FIFO clears full.
//
// The FIFO is empty when the next read pointer will
// be equal to the write pointer after a read. Writing
// to a FIFO clears empty.
//
// A simultaneous read and write must not change any of
// the empty or full flags unless there is a drop on error event.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk13
always @* begin
next_full = full;
next_empty = empty;
if (read && !write) begin
next_full = 1'b0;
if (incremented_rd_ptr == wr_ptr)
next_empty = 1'b1;
end
if (write && !read) begin
if (!drop_on_error)
next_empty = 1'b0;
else if (curr_sop_ptr == rd_ptr) // drop on error and only 1 pkt in fifo
next_empty = 1'b1;
if (incremented_wr_ptr == rd_ptr && !drop_on_error)
next_full = 1'b1;
end
if (write && read && drop_on_error) begin
if (curr_sop_ptr == next_rd_ptr)
next_empty = 1'b1;
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
empty <= 1;
full <= 0;
end
else begin
empty <= next_empty;
full <= next_full;
end
end
end else begin : gen_blk13_else
// --------------------------------------------------
// Register FIFO Status Management
//
// Full when the tail occupancy bit is 1. Empty when
// the head occupancy bit is 0.
// --------------------------------------------------
always @* begin
full = mem_used[DEPTH-1];
empty = !mem_used[0];
// ------------------------------------------
// For a single slot FIFO, reading clears the
// full status immediately.
// ------------------------------------------
if (DEPTH == 1)
full = mem_used[0] && !read;
internal_out_payload = mem[0];
// ------------------------------------------
// Writes clear empty immediately for lookahead modes.
// Note that we use in_valid instead of write to avoid
// combinational loops (in lookahead mode, qualifying
// with in_ready is meaningless).
//
// In a 1-deep FIFO, a possible combinational loop runs
// from write -> out_valid -> out_ready -> write
// ------------------------------------------
if (EMPTY_LATENCY == 0) begin
empty = !mem_used[0] && !in_valid;
if (!mem_used[0] && in_valid)
internal_out_payload = in_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Avalon-ST Signals
//
// The in_ready signal is straightforward.
//
// To match memory latency when empty latency > 1,
// out_valid assertions must be delayed by one clock
// cycle.
//
// Note: out_valid deassertions must not be delayed or
// the FIFO will underflow.
// --------------------------------------------------
assign in_ready = !full;
assign internal_out_ready = out_ready || !out_valid;
generate if (EMPTY_LATENCY > 1) begin : gen_blk14
always @(posedge clk or posedge reset) begin
if (reset)
internal_out_valid <= 0;
else begin
internal_out_valid <= !empty & ok_to_forward & ~drop_on_error;
if (read) begin
if (incremented_rd_ptr == wr_ptr)
internal_out_valid <= 1'b0;
end
end
end
end else begin : gen_blk14_else
always @* begin
internal_out_valid = !empty & ok_to_forward;
end
end
endgenerate
// --------------------------------------------------
// Single Output Pipeline Stage
//
// This output pipeline stage is enabled if the FIFO's
// empty latency is set to 3 (default). It is disabled
// for all other allowed latencies.
//
// Reason: The memory outputs are unregistered, so we have to
// register the output or fmax will drop if combinatorial
// logic is present on the output datapath.
//
// Q: The Avalon-ST spec says that I have to register my outputs
// But isn't the memory counted as a register?
// A: The path from the address lookup to the memory output is
// slow. Registering the memory outputs is a good idea.
//
// The registers get packed into the memory by the fitter
// which means minimal resources are consumed (the result
// is a altsyncram with registered outputs, available on
// all modern Altera devices).
//
// This output stage acts as an extra slot in the FIFO,
// and complicates the fill level.
// --------------------------------------------------
generate if (EMPTY_LATENCY == 3) begin : gen_blk15
always @(posedge clk or posedge reset) begin
if (reset) begin
out_valid <= 0;
out_payload <= 0;
end
else begin
if (internal_out_ready) begin
out_valid <= internal_out_valid & ok_to_forward;
out_payload <= internal_out_payload;
end
end
end
end
else begin : gen_blk15_else
always @* begin
out_valid = internal_out_valid;
out_payload = internal_out_payload;
end
end
endgenerate
// --------------------------------------------------
// Fill Level
//
// The fill level is calculated from the next write
// and read pointers to avoid unnecessary latency
// and logic.
//
// However, if the store-and-forward mode of the FIFO
// is enabled, the fill level is an up-down counter
// for fmax optimization reasons.
//
// If the output pipeline is enabled, the fill level
// must account for it, or we'll always be off by one.
// This may, or may not be important depending on the
// application.
//
// For now, we'll always calculate the exact fill level
// at the cost of an extra adder when the output stage
// is enabled.
// --------------------------------------------------
generate if (USE_FILL_LEVEL) begin : gen_blk16
wire [31:0] depth32;
assign depth32 = DEPTH;
if (USE_STORE_FORWARD) begin
reg [ADDR_WIDTH : 0] curr_packet_len_less_one;
// --------------------------------------------------
// We only drop on endofpacket. As long as we don't add to the fill
// level on the dropped endofpacket cycle, we can simply subtract
// (packet length - 1) from the fill level for dropped packets.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
curr_packet_len_less_one <= 0;
end else begin
if (write) begin
curr_packet_len_less_one <= curr_packet_len_less_one + 1'b1;
if (in_endofpacket)
curr_packet_len_less_one <= 0;
end
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
fifo_fill_level <= 0;
end else if (drop_on_error) begin
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one;
if (read)
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one - 1'b1;
end else if (write && !read) begin
fifo_fill_level <= fifo_fill_level + 1'b1;
end else if (read && !write) begin
fifo_fill_level <= fifo_fill_level - 1'b1;
end
end
end else begin
always @(posedge clk or posedge reset) begin
if (reset)
fifo_fill_level <= 0;
else if (next_full & !drop_on_error)
fifo_fill_level <= depth32[ADDR_WIDTH:0];
else begin
fifo_fill_level[ADDR_WIDTH] <= 1'b0;
fifo_fill_level[ADDR_WIDTH-1 : 0] <= next_wr_ptr - next_rd_ptr;
end
end
end
always @* begin
fill_level = fifo_fill_level;
if (EMPTY_LATENCY == 3)
fill_level = fifo_fill_level + {{ADDR_WIDTH{1'b0}}, out_valid};
end
end
else begin : gen_blk16_else
always @* begin
fill_level = 0;
end
end
endgenerate
generate if (USE_ALMOST_FULL_IF) begin : gen_blk17
assign almost_full_data = (fill_level >= almost_full_threshold);
end
else
assign almost_full_data = 0;
endgenerate
generate if (USE_ALMOST_EMPTY_IF) begin : gen_blk18
assign almost_empty_data = (fill_level <= almost_empty_threshold);
end
else
assign almost_empty_data = 0;
endgenerate
// --------------------------------------------------
// Avalon-MM Status & Control Connection Point
//
// Register map:
//
// | Addr | RW | 31 - 0 |
// | 0 | R | Fill level |
//
// The registering of this connection point means
// that there is a cycle of latency between
// reads/writes and the updating of the fill level.
// --------------------------------------------------
generate if (USE_STORE_FORWARD) begin : gen_blk19
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
cut_through_threshold <= 0;
drop_on_error_en <= 0;
csr_readdata <= 0;
pkt_mode <= 1'b1;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 5)
csr_readdata <= {31'b0, drop_on_error_en};
else if (csr_address == 4)
csr_readdata <= {8'b0, cut_through_threshold};
else if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b101)
drop_on_error_en <= csr_writedata[0];
else if(csr_address == 3'b100) begin
cut_through_threshold <= csr_writedata[23:0];
pkt_mode <= (csr_writedata[23:0] == 0);
end
else if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else if (USE_ALMOST_FULL_IF || USE_ALMOST_EMPTY_IF) begin : gen_blk19_else1
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
csr_readdata <= 0;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else begin : gen_blk19_else2
always @(posedge clk or posedge reset) begin
if (reset) begin
csr_readdata <= 0;
end
else if (csr_read) begin
csr_readdata <= 0;
if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
end
end
endgenerate
// --------------------------------------------------
// Store and forward logic
// --------------------------------------------------
// if the fifo gets full before the entire packet or the
// cut-threshold condition is met then start sending out
// data in order to avoid dead-lock situation
generate if (USE_STORE_FORWARD) begin : gen_blk20
assign wait_for_threshold = (fifo_fill_level_lt_cut_through_threshold) & wait_for_pkt ;
assign wait_for_pkt = pkt_cnt_eq_zero | (pkt_cnt_eq_one & out_pkt_leave);
assign ok_to_forward = (pkt_mode ? (~wait_for_pkt | ~pkt_has_started) :
~wait_for_threshold) | fifo_too_small_r;
assign in_pkt_eop_arrive = in_valid & in_ready & in_endofpacket;
assign in_pkt_start = in_valid & in_ready & in_startofpacket;
assign in_pkt_error = in_valid & in_ready & |in_error;
assign out_pkt_sop_leave = out_valid & out_ready & out_startofpacket;
assign out_pkt_leave = out_valid & out_ready & out_endofpacket;
assign fifo_too_small = (pkt_mode ? wait_for_pkt : wait_for_threshold) & full & out_ready;
// count packets coming and going into the fifo
always @(posedge clk or posedge reset) begin
if (reset) begin
pkt_cnt <= 0;
pkt_has_started <= 0;
sop_has_left_fifo <= 0;
fifo_too_small_r <= 0;
pkt_cnt_eq_zero <= 1'b1;
pkt_cnt_eq_one <= 1'b0;
fifo_fill_level_lt_cut_through_threshold <= 1'b1;
end
else begin
fifo_fill_level_lt_cut_through_threshold <= fifo_fill_level < cut_through_threshold;
fifo_too_small_r <= fifo_too_small;
if( in_pkt_eop_arrive )
sop_has_left_fifo <= 1'b0;
else if (out_pkt_sop_leave & pkt_cnt_eq_zero )
sop_has_left_fifo <= 1'b1;
if (in_pkt_eop_arrive & ~out_pkt_leave & ~drop_on_error ) begin
pkt_cnt <= pkt_cnt + 1'b1;
pkt_cnt_eq_zero <= 0;
if (pkt_cnt == 0)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
else if((~in_pkt_eop_arrive | drop_on_error) & out_pkt_leave) begin
pkt_cnt <= pkt_cnt - 1'b1;
if (pkt_cnt == 1)
pkt_cnt_eq_zero <= 1'b1;
else
pkt_cnt_eq_zero <= 1'b0;
if (pkt_cnt == 2)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
if (in_pkt_start)
pkt_has_started <= 1'b1;
else if (in_pkt_eop_arrive)
pkt_has_started <= 1'b0;
end
end
// drop on error logic
always @(posedge clk or posedge reset) begin
if (reset) begin
sop_ptr <= 0;
error_in_pkt <= 0;
end
else begin
// save the location of the SOP
if ( in_pkt_start )
sop_ptr <= wr_ptr;
// remember if error in pkt
// log error only if packet has already started
if (in_pkt_eop_arrive)
error_in_pkt <= 1'b0;
else if ( in_pkt_error & (pkt_has_started | in_pkt_start))
error_in_pkt <= 1'b1;
end
end
assign drop_on_error = drop_on_error_en & (error_in_pkt | in_pkt_error) & in_pkt_eop_arrive &
~sop_has_left_fifo & ~(out_pkt_sop_leave & pkt_cnt_eq_zero);
assign curr_sop_ptr = (write && in_startofpacket && in_endofpacket) ? wr_ptr : sop_ptr;
end
else begin : gen_blk20_else
assign ok_to_forward = 1'b1;
assign drop_on_error = 1'b0;
if (ADDR_WIDTH <= 1)
assign curr_sop_ptr = 1'b0;
else
assign curr_sop_ptr = {ADDR_WIDTH - 1 { 1'b0 }};
end
endgenerate
// --------------------------------------------------
// Calculates the log2ceil of the input value
// --------------------------------------------------
function integer log2ceil;
input integer val;
reg[31:0] i;
begin
i = 1;
log2ceil = 0;
while (i < val) begin
log2ceil = log2ceil + 1;
i = i[30:0] << 1;
end
end
endfunction
endmodule
|
// -----------------------------------------------------------
// Legal Notice: (C)2007 Altera Corporation. All rights reserved. Your
// use of Altera Corporation's design tools, logic functions and other
// software and tools, and its AMPP partner logic functions, and any
// output files any of the foregoing (including device programming or
// simulation files), and any associated documentation or information are
// expressly subject to the terms and conditions of the Altera Program
// License Subscription Agreement or other applicable license agreement,
// including, without limitation, that your use is for the sole purpose
// of programming logic devices manufactured by Altera and sold by Altera
// or its authorized distributors. Please refer to the applicable
// agreement for further details.
//
// Description: Single clock Avalon-ST FIFO.
// -----------------------------------------------------------
`timescale 1 ns / 1 ns
//altera message_off 10036
module altera_avalon_sc_fifo
#(
// --------------------------------------------------
// Parameters
// --------------------------------------------------
parameter SYMBOLS_PER_BEAT = 1,
parameter BITS_PER_SYMBOL = 8,
parameter FIFO_DEPTH = 16,
parameter CHANNEL_WIDTH = 0,
parameter ERROR_WIDTH = 0,
parameter USE_PACKETS = 0,
parameter USE_FILL_LEVEL = 0,
parameter USE_STORE_FORWARD = 0,
parameter USE_ALMOST_FULL_IF = 0,
parameter USE_ALMOST_EMPTY_IF = 0,
// --------------------------------------------------
// Empty latency is defined as the number of cycles
// required for a write to deassert the empty flag.
// For example, a latency of 1 means that the empty
// flag is deasserted on the cycle after a write.
//
// Another way to think of it is the latency for a
// write to propagate to the output.
//
// An empty latency of 0 implies lookahead, which is
// only implemented for the register-based FIFO.
// --------------------------------------------------
parameter EMPTY_LATENCY = 3,
parameter USE_MEMORY_BLOCKS = 1,
// --------------------------------------------------
// Internal Parameters
// --------------------------------------------------
parameter DATA_WIDTH = SYMBOLS_PER_BEAT * BITS_PER_SYMBOL,
parameter EMPTY_WIDTH = log2ceil(SYMBOLS_PER_BEAT)
)
(
// --------------------------------------------------
// Ports
// --------------------------------------------------
input clk,
input reset,
input [DATA_WIDTH-1: 0] in_data,
input in_valid,
input in_startofpacket,
input in_endofpacket,
input [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] in_empty,
input [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] in_error,
input [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] in_channel,
output in_ready,
output [DATA_WIDTH-1 : 0] out_data,
output reg out_valid,
output out_startofpacket,
output out_endofpacket,
output [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] out_empty,
output [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] out_error,
output [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] out_channel,
input out_ready,
input [(USE_STORE_FORWARD ? 2 : 1) : 0] csr_address,
input csr_write,
input csr_read,
input [31 : 0] csr_writedata,
output reg [31 : 0] csr_readdata,
output wire almost_full_data,
output wire almost_empty_data
);
// --------------------------------------------------
// Local Parameters
// --------------------------------------------------
localparam ADDR_WIDTH = log2ceil(FIFO_DEPTH);
localparam DEPTH = FIFO_DEPTH;
localparam PKT_SIGNALS_WIDTH = 2 + EMPTY_WIDTH;
localparam PAYLOAD_WIDTH = (USE_PACKETS == 1) ?
2 + EMPTY_WIDTH + DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH:
DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH;
// --------------------------------------------------
// Internal Signals
// --------------------------------------------------
genvar i;
reg [PAYLOAD_WIDTH-1 : 0] mem [DEPTH-1 : 0];
reg [ADDR_WIDTH-1 : 0] wr_ptr;
reg [ADDR_WIDTH-1 : 0] rd_ptr;
reg [DEPTH-1 : 0] mem_used;
wire [ADDR_WIDTH-1 : 0] next_wr_ptr;
wire [ADDR_WIDTH-1 : 0] next_rd_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_wr_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_rd_ptr;
wire [ADDR_WIDTH-1 : 0] mem_rd_ptr;
wire read;
wire write;
reg empty;
reg next_empty;
reg full;
reg next_full;
wire [PKT_SIGNALS_WIDTH-1 : 0] in_packet_signals;
wire [PKT_SIGNALS_WIDTH-1 : 0] out_packet_signals;
wire [PAYLOAD_WIDTH-1 : 0] in_payload;
reg [PAYLOAD_WIDTH-1 : 0] internal_out_payload;
reg [PAYLOAD_WIDTH-1 : 0] out_payload;
reg internal_out_valid;
wire internal_out_ready;
reg [ADDR_WIDTH : 0] fifo_fill_level;
reg [ADDR_WIDTH : 0] fill_level;
reg [ADDR_WIDTH-1 : 0] sop_ptr = 0;
wire [ADDR_WIDTH-1 : 0] curr_sop_ptr;
reg [23:0] almost_full_threshold;
reg [23:0] almost_empty_threshold;
reg [23:0] cut_through_threshold;
reg [15:0] pkt_cnt;
reg drop_on_error_en;
reg error_in_pkt;
reg pkt_has_started;
reg sop_has_left_fifo;
reg fifo_too_small_r;
reg pkt_cnt_eq_zero;
reg pkt_cnt_eq_one;
wire wait_for_threshold;
reg pkt_mode;
wire wait_for_pkt;
wire ok_to_forward;
wire in_pkt_eop_arrive;
wire out_pkt_leave;
wire in_pkt_start;
wire in_pkt_error;
wire drop_on_error;
wire fifo_too_small;
wire out_pkt_sop_leave;
wire [31:0] max_fifo_size;
reg fifo_fill_level_lt_cut_through_threshold;
// --------------------------------------------------
// Define Payload
//
// Icky part where we decide which signals form the
// payload to the FIFO with generate blocks.
// --------------------------------------------------
generate
if (EMPTY_WIDTH > 0) begin : gen_blk1
assign in_packet_signals = {in_startofpacket, in_endofpacket, in_empty};
assign {out_startofpacket, out_endofpacket, out_empty} = out_packet_signals;
end
else begin : gen_blk1_else
assign out_empty = in_error;
assign in_packet_signals = {in_startofpacket, in_endofpacket};
assign {out_startofpacket, out_endofpacket} = out_packet_signals;
end
endgenerate
generate
if (USE_PACKETS) begin : gen_blk2
if (ERROR_WIDTH > 0) begin : gen_blk3
if (CHANNEL_WIDTH > 0) begin : gen_blk4
assign in_payload = {in_packet_signals, in_data, in_error, in_channel};
assign {out_packet_signals, out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk4_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data, in_error};
assign {out_packet_signals, out_data, out_error} = out_payload;
end
end
else begin : gen_blk3_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk5
assign in_payload = {in_packet_signals, in_data, in_channel};
assign {out_packet_signals, out_data, out_channel} = out_payload;
end
else begin : gen_blk5_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data};
assign {out_packet_signals, out_data} = out_payload;
end
end
end
else begin : gen_blk2_else
assign out_packet_signals = 0;
if (ERROR_WIDTH > 0) begin : gen_blk6
if (CHANNEL_WIDTH > 0) begin : gen_blk7
assign in_payload = {in_data, in_error, in_channel};
assign {out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk7_else
assign out_channel = in_channel;
assign in_payload = {in_data, in_error};
assign {out_data, out_error} = out_payload;
end
end
else begin : gen_blk6_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk8
assign in_payload = {in_data, in_channel};
assign {out_data, out_channel} = out_payload;
end
else begin : gen_blk8_else
assign out_channel = in_channel;
assign in_payload = in_data;
assign out_data = out_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Memory-based FIFO storage
//
// To allow a ready latency of 0, the read index is
// obtained from the next read pointer and memory
// outputs are unregistered.
//
// If the empty latency is 1, we infer bypass logic
// around the memory so writes propagate to the
// outputs on the next cycle.
//
// Do not change the way this is coded: Quartus needs
// a perfect match to the template, and any attempt to
// refactor the two always blocks into one will break
// memory inference.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk9
if (EMPTY_LATENCY == 1) begin : gen_blk10
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] = in_payload;
internal_out_payload = mem[mem_rd_ptr];
end
end else begin : gen_blk10_else
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] <= in_payload;
internal_out_payload <= mem[mem_rd_ptr];
end
end
assign mem_rd_ptr = next_rd_ptr;
end else begin : gen_blk9_else
// --------------------------------------------------
// Register-based FIFO storage
//
// Uses a shift register as the storage element. Each
// shift register slot has a bit which indicates if
// the slot is occupied (credit to Sam H for the idea).
// The occupancy bits are contiguous and start from the
// lsb, so 0000, 0001, 0011, 0111, 1111 for a 4-deep
// FIFO.
//
// Each slot is enabled during a read or when it
// is unoccupied. New data is always written to every
// going-to-be-empty slot (we keep track of which ones
// are actually useful with the occupancy bits). On a
// read we shift occupied slots.
//
// The exception is the last slot, which always gets
// new data when it is unoccupied.
// --------------------------------------------------
for (i = 0; i < DEPTH-1; i = i + 1) begin : shift_reg
always @(posedge clk or posedge reset) begin
if (reset) begin
mem[i] <= 0;
end
else if (read || !mem_used[i]) begin
if (!mem_used[i+1])
mem[i] <= in_payload;
else
mem[i] <= mem[i+1];
end
end
end
always @(posedge clk, posedge reset) begin
if (reset) begin
mem[DEPTH-1] <= 0;
end
else begin
if (DEPTH == 1) begin
if (write)
mem[DEPTH-1] <= in_payload;
end
else if (!mem_used[DEPTH-1])
mem[DEPTH-1] <= in_payload;
end
end
end
endgenerate
assign read = internal_out_ready && internal_out_valid && ok_to_forward;
assign write = in_ready && in_valid;
// --------------------------------------------------
// Pointer Management
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk11
assign incremented_wr_ptr = wr_ptr + 1'b1;
assign incremented_rd_ptr = rd_ptr + 1'b1;
assign next_wr_ptr = drop_on_error ? curr_sop_ptr : write ? incremented_wr_ptr : wr_ptr;
assign next_rd_ptr = (read) ? incremented_rd_ptr : rd_ptr;
always @(posedge clk or posedge reset) begin
if (reset) begin
wr_ptr <= 0;
rd_ptr <= 0;
end
else begin
wr_ptr <= next_wr_ptr;
rd_ptr <= next_rd_ptr;
end
end
end else begin : gen_blk11_else
// --------------------------------------------------
// Shift Register Occupancy Bits
//
// Consider a 4-deep FIFO with 2 entries: 0011
// On a read and write, do not modify the bits.
// On a write, left-shift the bits to get 0111.
// On a read, right-shift the bits to get 0001.
//
// Also, on a write we set bit0 (the head), while
// clearing the tail on a read.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[0] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[0] <= 1;
else if (read) begin
if (DEPTH > 1)
mem_used[0] <= mem_used[1];
else
mem_used[0] <= 0;
end
end
end
end
if (DEPTH > 1) begin : gen_blk12
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[DEPTH-1] <= 0;
end
else begin
if (write ^ read) begin
mem_used[DEPTH-1] <= 0;
if (write)
mem_used[DEPTH-1] <= mem_used[DEPTH-2];
end
end
end
end
for (i = 1; i < DEPTH-1; i = i + 1) begin : storage_logic
always @(posedge clk, posedge reset) begin
if (reset) begin
mem_used[i] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[i] <= mem_used[i-1];
else if (read)
mem_used[i] <= mem_used[i+1];
end
end
end
end
end
endgenerate
// --------------------------------------------------
// Memory FIFO Status Management
//
// Generates the full and empty signals from the
// pointers. The FIFO is full when the next write
// pointer will be equal to the read pointer after
// a write. Reading from a FIFO clears full.
//
// The FIFO is empty when the next read pointer will
// be equal to the write pointer after a read. Writing
// to a FIFO clears empty.
//
// A simultaneous read and write must not change any of
// the empty or full flags unless there is a drop on error event.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk13
always @* begin
next_full = full;
next_empty = empty;
if (read && !write) begin
next_full = 1'b0;
if (incremented_rd_ptr == wr_ptr)
next_empty = 1'b1;
end
if (write && !read) begin
if (!drop_on_error)
next_empty = 1'b0;
else if (curr_sop_ptr == rd_ptr) // drop on error and only 1 pkt in fifo
next_empty = 1'b1;
if (incremented_wr_ptr == rd_ptr && !drop_on_error)
next_full = 1'b1;
end
if (write && read && drop_on_error) begin
if (curr_sop_ptr == next_rd_ptr)
next_empty = 1'b1;
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
empty <= 1;
full <= 0;
end
else begin
empty <= next_empty;
full <= next_full;
end
end
end else begin : gen_blk13_else
// --------------------------------------------------
// Register FIFO Status Management
//
// Full when the tail occupancy bit is 1. Empty when
// the head occupancy bit is 0.
// --------------------------------------------------
always @* begin
full = mem_used[DEPTH-1];
empty = !mem_used[0];
// ------------------------------------------
// For a single slot FIFO, reading clears the
// full status immediately.
// ------------------------------------------
if (DEPTH == 1)
full = mem_used[0] && !read;
internal_out_payload = mem[0];
// ------------------------------------------
// Writes clear empty immediately for lookahead modes.
// Note that we use in_valid instead of write to avoid
// combinational loops (in lookahead mode, qualifying
// with in_ready is meaningless).
//
// In a 1-deep FIFO, a possible combinational loop runs
// from write -> out_valid -> out_ready -> write
// ------------------------------------------
if (EMPTY_LATENCY == 0) begin
empty = !mem_used[0] && !in_valid;
if (!mem_used[0] && in_valid)
internal_out_payload = in_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Avalon-ST Signals
//
// The in_ready signal is straightforward.
//
// To match memory latency when empty latency > 1,
// out_valid assertions must be delayed by one clock
// cycle.
//
// Note: out_valid deassertions must not be delayed or
// the FIFO will underflow.
// --------------------------------------------------
assign in_ready = !full;
assign internal_out_ready = out_ready || !out_valid;
generate if (EMPTY_LATENCY > 1) begin : gen_blk14
always @(posedge clk or posedge reset) begin
if (reset)
internal_out_valid <= 0;
else begin
internal_out_valid <= !empty & ok_to_forward & ~drop_on_error;
if (read) begin
if (incremented_rd_ptr == wr_ptr)
internal_out_valid <= 1'b0;
end
end
end
end else begin : gen_blk14_else
always @* begin
internal_out_valid = !empty & ok_to_forward;
end
end
endgenerate
// --------------------------------------------------
// Single Output Pipeline Stage
//
// This output pipeline stage is enabled if the FIFO's
// empty latency is set to 3 (default). It is disabled
// for all other allowed latencies.
//
// Reason: The memory outputs are unregistered, so we have to
// register the output or fmax will drop if combinatorial
// logic is present on the output datapath.
//
// Q: The Avalon-ST spec says that I have to register my outputs
// But isn't the memory counted as a register?
// A: The path from the address lookup to the memory output is
// slow. Registering the memory outputs is a good idea.
//
// The registers get packed into the memory by the fitter
// which means minimal resources are consumed (the result
// is a altsyncram with registered outputs, available on
// all modern Altera devices).
//
// This output stage acts as an extra slot in the FIFO,
// and complicates the fill level.
// --------------------------------------------------
generate if (EMPTY_LATENCY == 3) begin : gen_blk15
always @(posedge clk or posedge reset) begin
if (reset) begin
out_valid <= 0;
out_payload <= 0;
end
else begin
if (internal_out_ready) begin
out_valid <= internal_out_valid & ok_to_forward;
out_payload <= internal_out_payload;
end
end
end
end
else begin : gen_blk15_else
always @* begin
out_valid = internal_out_valid;
out_payload = internal_out_payload;
end
end
endgenerate
// --------------------------------------------------
// Fill Level
//
// The fill level is calculated from the next write
// and read pointers to avoid unnecessary latency
// and logic.
//
// However, if the store-and-forward mode of the FIFO
// is enabled, the fill level is an up-down counter
// for fmax optimization reasons.
//
// If the output pipeline is enabled, the fill level
// must account for it, or we'll always be off by one.
// This may, or may not be important depending on the
// application.
//
// For now, we'll always calculate the exact fill level
// at the cost of an extra adder when the output stage
// is enabled.
// --------------------------------------------------
generate if (USE_FILL_LEVEL) begin : gen_blk16
wire [31:0] depth32;
assign depth32 = DEPTH;
if (USE_STORE_FORWARD) begin
reg [ADDR_WIDTH : 0] curr_packet_len_less_one;
// --------------------------------------------------
// We only drop on endofpacket. As long as we don't add to the fill
// level on the dropped endofpacket cycle, we can simply subtract
// (packet length - 1) from the fill level for dropped packets.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
curr_packet_len_less_one <= 0;
end else begin
if (write) begin
curr_packet_len_less_one <= curr_packet_len_less_one + 1'b1;
if (in_endofpacket)
curr_packet_len_less_one <= 0;
end
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
fifo_fill_level <= 0;
end else if (drop_on_error) begin
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one;
if (read)
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one - 1'b1;
end else if (write && !read) begin
fifo_fill_level <= fifo_fill_level + 1'b1;
end else if (read && !write) begin
fifo_fill_level <= fifo_fill_level - 1'b1;
end
end
end else begin
always @(posedge clk or posedge reset) begin
if (reset)
fifo_fill_level <= 0;
else if (next_full & !drop_on_error)
fifo_fill_level <= depth32[ADDR_WIDTH:0];
else begin
fifo_fill_level[ADDR_WIDTH] <= 1'b0;
fifo_fill_level[ADDR_WIDTH-1 : 0] <= next_wr_ptr - next_rd_ptr;
end
end
end
always @* begin
fill_level = fifo_fill_level;
if (EMPTY_LATENCY == 3)
fill_level = fifo_fill_level + {{ADDR_WIDTH{1'b0}}, out_valid};
end
end
else begin : gen_blk16_else
always @* begin
fill_level = 0;
end
end
endgenerate
generate if (USE_ALMOST_FULL_IF) begin : gen_blk17
assign almost_full_data = (fill_level >= almost_full_threshold);
end
else
assign almost_full_data = 0;
endgenerate
generate if (USE_ALMOST_EMPTY_IF) begin : gen_blk18
assign almost_empty_data = (fill_level <= almost_empty_threshold);
end
else
assign almost_empty_data = 0;
endgenerate
// --------------------------------------------------
// Avalon-MM Status & Control Connection Point
//
// Register map:
//
// | Addr | RW | 31 - 0 |
// | 0 | R | Fill level |
//
// The registering of this connection point means
// that there is a cycle of latency between
// reads/writes and the updating of the fill level.
// --------------------------------------------------
generate if (USE_STORE_FORWARD) begin : gen_blk19
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
cut_through_threshold <= 0;
drop_on_error_en <= 0;
csr_readdata <= 0;
pkt_mode <= 1'b1;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 5)
csr_readdata <= {31'b0, drop_on_error_en};
else if (csr_address == 4)
csr_readdata <= {8'b0, cut_through_threshold};
else if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b101)
drop_on_error_en <= csr_writedata[0];
else if(csr_address == 3'b100) begin
cut_through_threshold <= csr_writedata[23:0];
pkt_mode <= (csr_writedata[23:0] == 0);
end
else if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else if (USE_ALMOST_FULL_IF || USE_ALMOST_EMPTY_IF) begin : gen_blk19_else1
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
csr_readdata <= 0;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else begin : gen_blk19_else2
always @(posedge clk or posedge reset) begin
if (reset) begin
csr_readdata <= 0;
end
else if (csr_read) begin
csr_readdata <= 0;
if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
end
end
endgenerate
// --------------------------------------------------
// Store and forward logic
// --------------------------------------------------
// if the fifo gets full before the entire packet or the
// cut-threshold condition is met then start sending out
// data in order to avoid dead-lock situation
generate if (USE_STORE_FORWARD) begin : gen_blk20
assign wait_for_threshold = (fifo_fill_level_lt_cut_through_threshold) & wait_for_pkt ;
assign wait_for_pkt = pkt_cnt_eq_zero | (pkt_cnt_eq_one & out_pkt_leave);
assign ok_to_forward = (pkt_mode ? (~wait_for_pkt | ~pkt_has_started) :
~wait_for_threshold) | fifo_too_small_r;
assign in_pkt_eop_arrive = in_valid & in_ready & in_endofpacket;
assign in_pkt_start = in_valid & in_ready & in_startofpacket;
assign in_pkt_error = in_valid & in_ready & |in_error;
assign out_pkt_sop_leave = out_valid & out_ready & out_startofpacket;
assign out_pkt_leave = out_valid & out_ready & out_endofpacket;
assign fifo_too_small = (pkt_mode ? wait_for_pkt : wait_for_threshold) & full & out_ready;
// count packets coming and going into the fifo
always @(posedge clk or posedge reset) begin
if (reset) begin
pkt_cnt <= 0;
pkt_has_started <= 0;
sop_has_left_fifo <= 0;
fifo_too_small_r <= 0;
pkt_cnt_eq_zero <= 1'b1;
pkt_cnt_eq_one <= 1'b0;
fifo_fill_level_lt_cut_through_threshold <= 1'b1;
end
else begin
fifo_fill_level_lt_cut_through_threshold <= fifo_fill_level < cut_through_threshold;
fifo_too_small_r <= fifo_too_small;
if( in_pkt_eop_arrive )
sop_has_left_fifo <= 1'b0;
else if (out_pkt_sop_leave & pkt_cnt_eq_zero )
sop_has_left_fifo <= 1'b1;
if (in_pkt_eop_arrive & ~out_pkt_leave & ~drop_on_error ) begin
pkt_cnt <= pkt_cnt + 1'b1;
pkt_cnt_eq_zero <= 0;
if (pkt_cnt == 0)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
else if((~in_pkt_eop_arrive | drop_on_error) & out_pkt_leave) begin
pkt_cnt <= pkt_cnt - 1'b1;
if (pkt_cnt == 1)
pkt_cnt_eq_zero <= 1'b1;
else
pkt_cnt_eq_zero <= 1'b0;
if (pkt_cnt == 2)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
if (in_pkt_start)
pkt_has_started <= 1'b1;
else if (in_pkt_eop_arrive)
pkt_has_started <= 1'b0;
end
end
// drop on error logic
always @(posedge clk or posedge reset) begin
if (reset) begin
sop_ptr <= 0;
error_in_pkt <= 0;
end
else begin
// save the location of the SOP
if ( in_pkt_start )
sop_ptr <= wr_ptr;
// remember if error in pkt
// log error only if packet has already started
if (in_pkt_eop_arrive)
error_in_pkt <= 1'b0;
else if ( in_pkt_error & (pkt_has_started | in_pkt_start))
error_in_pkt <= 1'b1;
end
end
assign drop_on_error = drop_on_error_en & (error_in_pkt | in_pkt_error) & in_pkt_eop_arrive &
~sop_has_left_fifo & ~(out_pkt_sop_leave & pkt_cnt_eq_zero);
assign curr_sop_ptr = (write && in_startofpacket && in_endofpacket) ? wr_ptr : sop_ptr;
end
else begin : gen_blk20_else
assign ok_to_forward = 1'b1;
assign drop_on_error = 1'b0;
if (ADDR_WIDTH <= 1)
assign curr_sop_ptr = 1'b0;
else
assign curr_sop_ptr = {ADDR_WIDTH - 1 { 1'b0 }};
end
endgenerate
// --------------------------------------------------
// Calculates the log2ceil of the input value
// --------------------------------------------------
function integer log2ceil;
input integer val;
reg[31:0] i;
begin
i = 1;
log2ceil = 0;
while (i < val) begin
log2ceil = log2ceil + 1;
i = i[30:0] << 1;
end
end
endfunction
endmodule
|
// -----------------------------------------------------------
// Legal Notice: (C)2007 Altera Corporation. All rights reserved. Your
// use of Altera Corporation's design tools, logic functions and other
// software and tools, and its AMPP partner logic functions, and any
// output files any of the foregoing (including device programming or
// simulation files), and any associated documentation or information are
// expressly subject to the terms and conditions of the Altera Program
// License Subscription Agreement or other applicable license agreement,
// including, without limitation, that your use is for the sole purpose
// of programming logic devices manufactured by Altera and sold by Altera
// or its authorized distributors. Please refer to the applicable
// agreement for further details.
//
// Description: Single clock Avalon-ST FIFO.
// -----------------------------------------------------------
`timescale 1 ns / 1 ns
//altera message_off 10036
module altera_avalon_sc_fifo
#(
// --------------------------------------------------
// Parameters
// --------------------------------------------------
parameter SYMBOLS_PER_BEAT = 1,
parameter BITS_PER_SYMBOL = 8,
parameter FIFO_DEPTH = 16,
parameter CHANNEL_WIDTH = 0,
parameter ERROR_WIDTH = 0,
parameter USE_PACKETS = 0,
parameter USE_FILL_LEVEL = 0,
parameter USE_STORE_FORWARD = 0,
parameter USE_ALMOST_FULL_IF = 0,
parameter USE_ALMOST_EMPTY_IF = 0,
// --------------------------------------------------
// Empty latency is defined as the number of cycles
// required for a write to deassert the empty flag.
// For example, a latency of 1 means that the empty
// flag is deasserted on the cycle after a write.
//
// Another way to think of it is the latency for a
// write to propagate to the output.
//
// An empty latency of 0 implies lookahead, which is
// only implemented for the register-based FIFO.
// --------------------------------------------------
parameter EMPTY_LATENCY = 3,
parameter USE_MEMORY_BLOCKS = 1,
// --------------------------------------------------
// Internal Parameters
// --------------------------------------------------
parameter DATA_WIDTH = SYMBOLS_PER_BEAT * BITS_PER_SYMBOL,
parameter EMPTY_WIDTH = log2ceil(SYMBOLS_PER_BEAT)
)
(
// --------------------------------------------------
// Ports
// --------------------------------------------------
input clk,
input reset,
input [DATA_WIDTH-1: 0] in_data,
input in_valid,
input in_startofpacket,
input in_endofpacket,
input [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] in_empty,
input [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] in_error,
input [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] in_channel,
output in_ready,
output [DATA_WIDTH-1 : 0] out_data,
output reg out_valid,
output out_startofpacket,
output out_endofpacket,
output [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] out_empty,
output [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] out_error,
output [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] out_channel,
input out_ready,
input [(USE_STORE_FORWARD ? 2 : 1) : 0] csr_address,
input csr_write,
input csr_read,
input [31 : 0] csr_writedata,
output reg [31 : 0] csr_readdata,
output wire almost_full_data,
output wire almost_empty_data
);
// --------------------------------------------------
// Local Parameters
// --------------------------------------------------
localparam ADDR_WIDTH = log2ceil(FIFO_DEPTH);
localparam DEPTH = FIFO_DEPTH;
localparam PKT_SIGNALS_WIDTH = 2 + EMPTY_WIDTH;
localparam PAYLOAD_WIDTH = (USE_PACKETS == 1) ?
2 + EMPTY_WIDTH + DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH:
DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH;
// --------------------------------------------------
// Internal Signals
// --------------------------------------------------
genvar i;
reg [PAYLOAD_WIDTH-1 : 0] mem [DEPTH-1 : 0];
reg [ADDR_WIDTH-1 : 0] wr_ptr;
reg [ADDR_WIDTH-1 : 0] rd_ptr;
reg [DEPTH-1 : 0] mem_used;
wire [ADDR_WIDTH-1 : 0] next_wr_ptr;
wire [ADDR_WIDTH-1 : 0] next_rd_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_wr_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_rd_ptr;
wire [ADDR_WIDTH-1 : 0] mem_rd_ptr;
wire read;
wire write;
reg empty;
reg next_empty;
reg full;
reg next_full;
wire [PKT_SIGNALS_WIDTH-1 : 0] in_packet_signals;
wire [PKT_SIGNALS_WIDTH-1 : 0] out_packet_signals;
wire [PAYLOAD_WIDTH-1 : 0] in_payload;
reg [PAYLOAD_WIDTH-1 : 0] internal_out_payload;
reg [PAYLOAD_WIDTH-1 : 0] out_payload;
reg internal_out_valid;
wire internal_out_ready;
reg [ADDR_WIDTH : 0] fifo_fill_level;
reg [ADDR_WIDTH : 0] fill_level;
reg [ADDR_WIDTH-1 : 0] sop_ptr = 0;
wire [ADDR_WIDTH-1 : 0] curr_sop_ptr;
reg [23:0] almost_full_threshold;
reg [23:0] almost_empty_threshold;
reg [23:0] cut_through_threshold;
reg [15:0] pkt_cnt;
reg drop_on_error_en;
reg error_in_pkt;
reg pkt_has_started;
reg sop_has_left_fifo;
reg fifo_too_small_r;
reg pkt_cnt_eq_zero;
reg pkt_cnt_eq_one;
wire wait_for_threshold;
reg pkt_mode;
wire wait_for_pkt;
wire ok_to_forward;
wire in_pkt_eop_arrive;
wire out_pkt_leave;
wire in_pkt_start;
wire in_pkt_error;
wire drop_on_error;
wire fifo_too_small;
wire out_pkt_sop_leave;
wire [31:0] max_fifo_size;
reg fifo_fill_level_lt_cut_through_threshold;
// --------------------------------------------------
// Define Payload
//
// Icky part where we decide which signals form the
// payload to the FIFO with generate blocks.
// --------------------------------------------------
generate
if (EMPTY_WIDTH > 0) begin : gen_blk1
assign in_packet_signals = {in_startofpacket, in_endofpacket, in_empty};
assign {out_startofpacket, out_endofpacket, out_empty} = out_packet_signals;
end
else begin : gen_blk1_else
assign out_empty = in_error;
assign in_packet_signals = {in_startofpacket, in_endofpacket};
assign {out_startofpacket, out_endofpacket} = out_packet_signals;
end
endgenerate
generate
if (USE_PACKETS) begin : gen_blk2
if (ERROR_WIDTH > 0) begin : gen_blk3
if (CHANNEL_WIDTH > 0) begin : gen_blk4
assign in_payload = {in_packet_signals, in_data, in_error, in_channel};
assign {out_packet_signals, out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk4_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data, in_error};
assign {out_packet_signals, out_data, out_error} = out_payload;
end
end
else begin : gen_blk3_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk5
assign in_payload = {in_packet_signals, in_data, in_channel};
assign {out_packet_signals, out_data, out_channel} = out_payload;
end
else begin : gen_blk5_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data};
assign {out_packet_signals, out_data} = out_payload;
end
end
end
else begin : gen_blk2_else
assign out_packet_signals = 0;
if (ERROR_WIDTH > 0) begin : gen_blk6
if (CHANNEL_WIDTH > 0) begin : gen_blk7
assign in_payload = {in_data, in_error, in_channel};
assign {out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk7_else
assign out_channel = in_channel;
assign in_payload = {in_data, in_error};
assign {out_data, out_error} = out_payload;
end
end
else begin : gen_blk6_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk8
assign in_payload = {in_data, in_channel};
assign {out_data, out_channel} = out_payload;
end
else begin : gen_blk8_else
assign out_channel = in_channel;
assign in_payload = in_data;
assign out_data = out_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Memory-based FIFO storage
//
// To allow a ready latency of 0, the read index is
// obtained from the next read pointer and memory
// outputs are unregistered.
//
// If the empty latency is 1, we infer bypass logic
// around the memory so writes propagate to the
// outputs on the next cycle.
//
// Do not change the way this is coded: Quartus needs
// a perfect match to the template, and any attempt to
// refactor the two always blocks into one will break
// memory inference.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk9
if (EMPTY_LATENCY == 1) begin : gen_blk10
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] = in_payload;
internal_out_payload = mem[mem_rd_ptr];
end
end else begin : gen_blk10_else
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] <= in_payload;
internal_out_payload <= mem[mem_rd_ptr];
end
end
assign mem_rd_ptr = next_rd_ptr;
end else begin : gen_blk9_else
// --------------------------------------------------
// Register-based FIFO storage
//
// Uses a shift register as the storage element. Each
// shift register slot has a bit which indicates if
// the slot is occupied (credit to Sam H for the idea).
// The occupancy bits are contiguous and start from the
// lsb, so 0000, 0001, 0011, 0111, 1111 for a 4-deep
// FIFO.
//
// Each slot is enabled during a read or when it
// is unoccupied. New data is always written to every
// going-to-be-empty slot (we keep track of which ones
// are actually useful with the occupancy bits). On a
// read we shift occupied slots.
//
// The exception is the last slot, which always gets
// new data when it is unoccupied.
// --------------------------------------------------
for (i = 0; i < DEPTH-1; i = i + 1) begin : shift_reg
always @(posedge clk or posedge reset) begin
if (reset) begin
mem[i] <= 0;
end
else if (read || !mem_used[i]) begin
if (!mem_used[i+1])
mem[i] <= in_payload;
else
mem[i] <= mem[i+1];
end
end
end
always @(posedge clk, posedge reset) begin
if (reset) begin
mem[DEPTH-1] <= 0;
end
else begin
if (DEPTH == 1) begin
if (write)
mem[DEPTH-1] <= in_payload;
end
else if (!mem_used[DEPTH-1])
mem[DEPTH-1] <= in_payload;
end
end
end
endgenerate
assign read = internal_out_ready && internal_out_valid && ok_to_forward;
assign write = in_ready && in_valid;
// --------------------------------------------------
// Pointer Management
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk11
assign incremented_wr_ptr = wr_ptr + 1'b1;
assign incremented_rd_ptr = rd_ptr + 1'b1;
assign next_wr_ptr = drop_on_error ? curr_sop_ptr : write ? incremented_wr_ptr : wr_ptr;
assign next_rd_ptr = (read) ? incremented_rd_ptr : rd_ptr;
always @(posedge clk or posedge reset) begin
if (reset) begin
wr_ptr <= 0;
rd_ptr <= 0;
end
else begin
wr_ptr <= next_wr_ptr;
rd_ptr <= next_rd_ptr;
end
end
end else begin : gen_blk11_else
// --------------------------------------------------
// Shift Register Occupancy Bits
//
// Consider a 4-deep FIFO with 2 entries: 0011
// On a read and write, do not modify the bits.
// On a write, left-shift the bits to get 0111.
// On a read, right-shift the bits to get 0001.
//
// Also, on a write we set bit0 (the head), while
// clearing the tail on a read.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[0] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[0] <= 1;
else if (read) begin
if (DEPTH > 1)
mem_used[0] <= mem_used[1];
else
mem_used[0] <= 0;
end
end
end
end
if (DEPTH > 1) begin : gen_blk12
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[DEPTH-1] <= 0;
end
else begin
if (write ^ read) begin
mem_used[DEPTH-1] <= 0;
if (write)
mem_used[DEPTH-1] <= mem_used[DEPTH-2];
end
end
end
end
for (i = 1; i < DEPTH-1; i = i + 1) begin : storage_logic
always @(posedge clk, posedge reset) begin
if (reset) begin
mem_used[i] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[i] <= mem_used[i-1];
else if (read)
mem_used[i] <= mem_used[i+1];
end
end
end
end
end
endgenerate
// --------------------------------------------------
// Memory FIFO Status Management
//
// Generates the full and empty signals from the
// pointers. The FIFO is full when the next write
// pointer will be equal to the read pointer after
// a write. Reading from a FIFO clears full.
//
// The FIFO is empty when the next read pointer will
// be equal to the write pointer after a read. Writing
// to a FIFO clears empty.
//
// A simultaneous read and write must not change any of
// the empty or full flags unless there is a drop on error event.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk13
always @* begin
next_full = full;
next_empty = empty;
if (read && !write) begin
next_full = 1'b0;
if (incremented_rd_ptr == wr_ptr)
next_empty = 1'b1;
end
if (write && !read) begin
if (!drop_on_error)
next_empty = 1'b0;
else if (curr_sop_ptr == rd_ptr) // drop on error and only 1 pkt in fifo
next_empty = 1'b1;
if (incremented_wr_ptr == rd_ptr && !drop_on_error)
next_full = 1'b1;
end
if (write && read && drop_on_error) begin
if (curr_sop_ptr == next_rd_ptr)
next_empty = 1'b1;
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
empty <= 1;
full <= 0;
end
else begin
empty <= next_empty;
full <= next_full;
end
end
end else begin : gen_blk13_else
// --------------------------------------------------
// Register FIFO Status Management
//
// Full when the tail occupancy bit is 1. Empty when
// the head occupancy bit is 0.
// --------------------------------------------------
always @* begin
full = mem_used[DEPTH-1];
empty = !mem_used[0];
// ------------------------------------------
// For a single slot FIFO, reading clears the
// full status immediately.
// ------------------------------------------
if (DEPTH == 1)
full = mem_used[0] && !read;
internal_out_payload = mem[0];
// ------------------------------------------
// Writes clear empty immediately for lookahead modes.
// Note that we use in_valid instead of write to avoid
// combinational loops (in lookahead mode, qualifying
// with in_ready is meaningless).
//
// In a 1-deep FIFO, a possible combinational loop runs
// from write -> out_valid -> out_ready -> write
// ------------------------------------------
if (EMPTY_LATENCY == 0) begin
empty = !mem_used[0] && !in_valid;
if (!mem_used[0] && in_valid)
internal_out_payload = in_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Avalon-ST Signals
//
// The in_ready signal is straightforward.
//
// To match memory latency when empty latency > 1,
// out_valid assertions must be delayed by one clock
// cycle.
//
// Note: out_valid deassertions must not be delayed or
// the FIFO will underflow.
// --------------------------------------------------
assign in_ready = !full;
assign internal_out_ready = out_ready || !out_valid;
generate if (EMPTY_LATENCY > 1) begin : gen_blk14
always @(posedge clk or posedge reset) begin
if (reset)
internal_out_valid <= 0;
else begin
internal_out_valid <= !empty & ok_to_forward & ~drop_on_error;
if (read) begin
if (incremented_rd_ptr == wr_ptr)
internal_out_valid <= 1'b0;
end
end
end
end else begin : gen_blk14_else
always @* begin
internal_out_valid = !empty & ok_to_forward;
end
end
endgenerate
// --------------------------------------------------
// Single Output Pipeline Stage
//
// This output pipeline stage is enabled if the FIFO's
// empty latency is set to 3 (default). It is disabled
// for all other allowed latencies.
//
// Reason: The memory outputs are unregistered, so we have to
// register the output or fmax will drop if combinatorial
// logic is present on the output datapath.
//
// Q: The Avalon-ST spec says that I have to register my outputs
// But isn't the memory counted as a register?
// A: The path from the address lookup to the memory output is
// slow. Registering the memory outputs is a good idea.
//
// The registers get packed into the memory by the fitter
// which means minimal resources are consumed (the result
// is a altsyncram with registered outputs, available on
// all modern Altera devices).
//
// This output stage acts as an extra slot in the FIFO,
// and complicates the fill level.
// --------------------------------------------------
generate if (EMPTY_LATENCY == 3) begin : gen_blk15
always @(posedge clk or posedge reset) begin
if (reset) begin
out_valid <= 0;
out_payload <= 0;
end
else begin
if (internal_out_ready) begin
out_valid <= internal_out_valid & ok_to_forward;
out_payload <= internal_out_payload;
end
end
end
end
else begin : gen_blk15_else
always @* begin
out_valid = internal_out_valid;
out_payload = internal_out_payload;
end
end
endgenerate
// --------------------------------------------------
// Fill Level
//
// The fill level is calculated from the next write
// and read pointers to avoid unnecessary latency
// and logic.
//
// However, if the store-and-forward mode of the FIFO
// is enabled, the fill level is an up-down counter
// for fmax optimization reasons.
//
// If the output pipeline is enabled, the fill level
// must account for it, or we'll always be off by one.
// This may, or may not be important depending on the
// application.
//
// For now, we'll always calculate the exact fill level
// at the cost of an extra adder when the output stage
// is enabled.
// --------------------------------------------------
generate if (USE_FILL_LEVEL) begin : gen_blk16
wire [31:0] depth32;
assign depth32 = DEPTH;
if (USE_STORE_FORWARD) begin
reg [ADDR_WIDTH : 0] curr_packet_len_less_one;
// --------------------------------------------------
// We only drop on endofpacket. As long as we don't add to the fill
// level on the dropped endofpacket cycle, we can simply subtract
// (packet length - 1) from the fill level for dropped packets.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
curr_packet_len_less_one <= 0;
end else begin
if (write) begin
curr_packet_len_less_one <= curr_packet_len_less_one + 1'b1;
if (in_endofpacket)
curr_packet_len_less_one <= 0;
end
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
fifo_fill_level <= 0;
end else if (drop_on_error) begin
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one;
if (read)
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one - 1'b1;
end else if (write && !read) begin
fifo_fill_level <= fifo_fill_level + 1'b1;
end else if (read && !write) begin
fifo_fill_level <= fifo_fill_level - 1'b1;
end
end
end else begin
always @(posedge clk or posedge reset) begin
if (reset)
fifo_fill_level <= 0;
else if (next_full & !drop_on_error)
fifo_fill_level <= depth32[ADDR_WIDTH:0];
else begin
fifo_fill_level[ADDR_WIDTH] <= 1'b0;
fifo_fill_level[ADDR_WIDTH-1 : 0] <= next_wr_ptr - next_rd_ptr;
end
end
end
always @* begin
fill_level = fifo_fill_level;
if (EMPTY_LATENCY == 3)
fill_level = fifo_fill_level + {{ADDR_WIDTH{1'b0}}, out_valid};
end
end
else begin : gen_blk16_else
always @* begin
fill_level = 0;
end
end
endgenerate
generate if (USE_ALMOST_FULL_IF) begin : gen_blk17
assign almost_full_data = (fill_level >= almost_full_threshold);
end
else
assign almost_full_data = 0;
endgenerate
generate if (USE_ALMOST_EMPTY_IF) begin : gen_blk18
assign almost_empty_data = (fill_level <= almost_empty_threshold);
end
else
assign almost_empty_data = 0;
endgenerate
// --------------------------------------------------
// Avalon-MM Status & Control Connection Point
//
// Register map:
//
// | Addr | RW | 31 - 0 |
// | 0 | R | Fill level |
//
// The registering of this connection point means
// that there is a cycle of latency between
// reads/writes and the updating of the fill level.
// --------------------------------------------------
generate if (USE_STORE_FORWARD) begin : gen_blk19
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
cut_through_threshold <= 0;
drop_on_error_en <= 0;
csr_readdata <= 0;
pkt_mode <= 1'b1;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 5)
csr_readdata <= {31'b0, drop_on_error_en};
else if (csr_address == 4)
csr_readdata <= {8'b0, cut_through_threshold};
else if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b101)
drop_on_error_en <= csr_writedata[0];
else if(csr_address == 3'b100) begin
cut_through_threshold <= csr_writedata[23:0];
pkt_mode <= (csr_writedata[23:0] == 0);
end
else if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else if (USE_ALMOST_FULL_IF || USE_ALMOST_EMPTY_IF) begin : gen_blk19_else1
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
csr_readdata <= 0;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else begin : gen_blk19_else2
always @(posedge clk or posedge reset) begin
if (reset) begin
csr_readdata <= 0;
end
else if (csr_read) begin
csr_readdata <= 0;
if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
end
end
endgenerate
// --------------------------------------------------
// Store and forward logic
// --------------------------------------------------
// if the fifo gets full before the entire packet or the
// cut-threshold condition is met then start sending out
// data in order to avoid dead-lock situation
generate if (USE_STORE_FORWARD) begin : gen_blk20
assign wait_for_threshold = (fifo_fill_level_lt_cut_through_threshold) & wait_for_pkt ;
assign wait_for_pkt = pkt_cnt_eq_zero | (pkt_cnt_eq_one & out_pkt_leave);
assign ok_to_forward = (pkt_mode ? (~wait_for_pkt | ~pkt_has_started) :
~wait_for_threshold) | fifo_too_small_r;
assign in_pkt_eop_arrive = in_valid & in_ready & in_endofpacket;
assign in_pkt_start = in_valid & in_ready & in_startofpacket;
assign in_pkt_error = in_valid & in_ready & |in_error;
assign out_pkt_sop_leave = out_valid & out_ready & out_startofpacket;
assign out_pkt_leave = out_valid & out_ready & out_endofpacket;
assign fifo_too_small = (pkt_mode ? wait_for_pkt : wait_for_threshold) & full & out_ready;
// count packets coming and going into the fifo
always @(posedge clk or posedge reset) begin
if (reset) begin
pkt_cnt <= 0;
pkt_has_started <= 0;
sop_has_left_fifo <= 0;
fifo_too_small_r <= 0;
pkt_cnt_eq_zero <= 1'b1;
pkt_cnt_eq_one <= 1'b0;
fifo_fill_level_lt_cut_through_threshold <= 1'b1;
end
else begin
fifo_fill_level_lt_cut_through_threshold <= fifo_fill_level < cut_through_threshold;
fifo_too_small_r <= fifo_too_small;
if( in_pkt_eop_arrive )
sop_has_left_fifo <= 1'b0;
else if (out_pkt_sop_leave & pkt_cnt_eq_zero )
sop_has_left_fifo <= 1'b1;
if (in_pkt_eop_arrive & ~out_pkt_leave & ~drop_on_error ) begin
pkt_cnt <= pkt_cnt + 1'b1;
pkt_cnt_eq_zero <= 0;
if (pkt_cnt == 0)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
else if((~in_pkt_eop_arrive | drop_on_error) & out_pkt_leave) begin
pkt_cnt <= pkt_cnt - 1'b1;
if (pkt_cnt == 1)
pkt_cnt_eq_zero <= 1'b1;
else
pkt_cnt_eq_zero <= 1'b0;
if (pkt_cnt == 2)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
if (in_pkt_start)
pkt_has_started <= 1'b1;
else if (in_pkt_eop_arrive)
pkt_has_started <= 1'b0;
end
end
// drop on error logic
always @(posedge clk or posedge reset) begin
if (reset) begin
sop_ptr <= 0;
error_in_pkt <= 0;
end
else begin
// save the location of the SOP
if ( in_pkt_start )
sop_ptr <= wr_ptr;
// remember if error in pkt
// log error only if packet has already started
if (in_pkt_eop_arrive)
error_in_pkt <= 1'b0;
else if ( in_pkt_error & (pkt_has_started | in_pkt_start))
error_in_pkt <= 1'b1;
end
end
assign drop_on_error = drop_on_error_en & (error_in_pkt | in_pkt_error) & in_pkt_eop_arrive &
~sop_has_left_fifo & ~(out_pkt_sop_leave & pkt_cnt_eq_zero);
assign curr_sop_ptr = (write && in_startofpacket && in_endofpacket) ? wr_ptr : sop_ptr;
end
else begin : gen_blk20_else
assign ok_to_forward = 1'b1;
assign drop_on_error = 1'b0;
if (ADDR_WIDTH <= 1)
assign curr_sop_ptr = 1'b0;
else
assign curr_sop_ptr = {ADDR_WIDTH - 1 { 1'b0 }};
end
endgenerate
// --------------------------------------------------
// Calculates the log2ceil of the input value
// --------------------------------------------------
function integer log2ceil;
input integer val;
reg[31:0] i;
begin
i = 1;
log2ceil = 0;
while (i < val) begin
log2ceil = log2ceil + 1;
i = i[30:0] << 1;
end
end
endfunction
endmodule
|
// -----------------------------------------------------------
// Legal Notice: (C)2007 Altera Corporation. All rights reserved. Your
// use of Altera Corporation's design tools, logic functions and other
// software and tools, and its AMPP partner logic functions, and any
// output files any of the foregoing (including device programming or
// simulation files), and any associated documentation or information are
// expressly subject to the terms and conditions of the Altera Program
// License Subscription Agreement or other applicable license agreement,
// including, without limitation, that your use is for the sole purpose
// of programming logic devices manufactured by Altera and sold by Altera
// or its authorized distributors. Please refer to the applicable
// agreement for further details.
//
// Description: Single clock Avalon-ST FIFO.
// -----------------------------------------------------------
`timescale 1 ns / 1 ns
//altera message_off 10036
module altera_avalon_sc_fifo
#(
// --------------------------------------------------
// Parameters
// --------------------------------------------------
parameter SYMBOLS_PER_BEAT = 1,
parameter BITS_PER_SYMBOL = 8,
parameter FIFO_DEPTH = 16,
parameter CHANNEL_WIDTH = 0,
parameter ERROR_WIDTH = 0,
parameter USE_PACKETS = 0,
parameter USE_FILL_LEVEL = 0,
parameter USE_STORE_FORWARD = 0,
parameter USE_ALMOST_FULL_IF = 0,
parameter USE_ALMOST_EMPTY_IF = 0,
// --------------------------------------------------
// Empty latency is defined as the number of cycles
// required for a write to deassert the empty flag.
// For example, a latency of 1 means that the empty
// flag is deasserted on the cycle after a write.
//
// Another way to think of it is the latency for a
// write to propagate to the output.
//
// An empty latency of 0 implies lookahead, which is
// only implemented for the register-based FIFO.
// --------------------------------------------------
parameter EMPTY_LATENCY = 3,
parameter USE_MEMORY_BLOCKS = 1,
// --------------------------------------------------
// Internal Parameters
// --------------------------------------------------
parameter DATA_WIDTH = SYMBOLS_PER_BEAT * BITS_PER_SYMBOL,
parameter EMPTY_WIDTH = log2ceil(SYMBOLS_PER_BEAT)
)
(
// --------------------------------------------------
// Ports
// --------------------------------------------------
input clk,
input reset,
input [DATA_WIDTH-1: 0] in_data,
input in_valid,
input in_startofpacket,
input in_endofpacket,
input [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] in_empty,
input [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] in_error,
input [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] in_channel,
output in_ready,
output [DATA_WIDTH-1 : 0] out_data,
output reg out_valid,
output out_startofpacket,
output out_endofpacket,
output [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] out_empty,
output [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] out_error,
output [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] out_channel,
input out_ready,
input [(USE_STORE_FORWARD ? 2 : 1) : 0] csr_address,
input csr_write,
input csr_read,
input [31 : 0] csr_writedata,
output reg [31 : 0] csr_readdata,
output wire almost_full_data,
output wire almost_empty_data
);
// --------------------------------------------------
// Local Parameters
// --------------------------------------------------
localparam ADDR_WIDTH = log2ceil(FIFO_DEPTH);
localparam DEPTH = FIFO_DEPTH;
localparam PKT_SIGNALS_WIDTH = 2 + EMPTY_WIDTH;
localparam PAYLOAD_WIDTH = (USE_PACKETS == 1) ?
2 + EMPTY_WIDTH + DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH:
DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH;
// --------------------------------------------------
// Internal Signals
// --------------------------------------------------
genvar i;
reg [PAYLOAD_WIDTH-1 : 0] mem [DEPTH-1 : 0];
reg [ADDR_WIDTH-1 : 0] wr_ptr;
reg [ADDR_WIDTH-1 : 0] rd_ptr;
reg [DEPTH-1 : 0] mem_used;
wire [ADDR_WIDTH-1 : 0] next_wr_ptr;
wire [ADDR_WIDTH-1 : 0] next_rd_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_wr_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_rd_ptr;
wire [ADDR_WIDTH-1 : 0] mem_rd_ptr;
wire read;
wire write;
reg empty;
reg next_empty;
reg full;
reg next_full;
wire [PKT_SIGNALS_WIDTH-1 : 0] in_packet_signals;
wire [PKT_SIGNALS_WIDTH-1 : 0] out_packet_signals;
wire [PAYLOAD_WIDTH-1 : 0] in_payload;
reg [PAYLOAD_WIDTH-1 : 0] internal_out_payload;
reg [PAYLOAD_WIDTH-1 : 0] out_payload;
reg internal_out_valid;
wire internal_out_ready;
reg [ADDR_WIDTH : 0] fifo_fill_level;
reg [ADDR_WIDTH : 0] fill_level;
reg [ADDR_WIDTH-1 : 0] sop_ptr = 0;
wire [ADDR_WIDTH-1 : 0] curr_sop_ptr;
reg [23:0] almost_full_threshold;
reg [23:0] almost_empty_threshold;
reg [23:0] cut_through_threshold;
reg [15:0] pkt_cnt;
reg drop_on_error_en;
reg error_in_pkt;
reg pkt_has_started;
reg sop_has_left_fifo;
reg fifo_too_small_r;
reg pkt_cnt_eq_zero;
reg pkt_cnt_eq_one;
wire wait_for_threshold;
reg pkt_mode;
wire wait_for_pkt;
wire ok_to_forward;
wire in_pkt_eop_arrive;
wire out_pkt_leave;
wire in_pkt_start;
wire in_pkt_error;
wire drop_on_error;
wire fifo_too_small;
wire out_pkt_sop_leave;
wire [31:0] max_fifo_size;
reg fifo_fill_level_lt_cut_through_threshold;
// --------------------------------------------------
// Define Payload
//
// Icky part where we decide which signals form the
// payload to the FIFO with generate blocks.
// --------------------------------------------------
generate
if (EMPTY_WIDTH > 0) begin : gen_blk1
assign in_packet_signals = {in_startofpacket, in_endofpacket, in_empty};
assign {out_startofpacket, out_endofpacket, out_empty} = out_packet_signals;
end
else begin : gen_blk1_else
assign out_empty = in_error;
assign in_packet_signals = {in_startofpacket, in_endofpacket};
assign {out_startofpacket, out_endofpacket} = out_packet_signals;
end
endgenerate
generate
if (USE_PACKETS) begin : gen_blk2
if (ERROR_WIDTH > 0) begin : gen_blk3
if (CHANNEL_WIDTH > 0) begin : gen_blk4
assign in_payload = {in_packet_signals, in_data, in_error, in_channel};
assign {out_packet_signals, out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk4_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data, in_error};
assign {out_packet_signals, out_data, out_error} = out_payload;
end
end
else begin : gen_blk3_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk5
assign in_payload = {in_packet_signals, in_data, in_channel};
assign {out_packet_signals, out_data, out_channel} = out_payload;
end
else begin : gen_blk5_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data};
assign {out_packet_signals, out_data} = out_payload;
end
end
end
else begin : gen_blk2_else
assign out_packet_signals = 0;
if (ERROR_WIDTH > 0) begin : gen_blk6
if (CHANNEL_WIDTH > 0) begin : gen_blk7
assign in_payload = {in_data, in_error, in_channel};
assign {out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk7_else
assign out_channel = in_channel;
assign in_payload = {in_data, in_error};
assign {out_data, out_error} = out_payload;
end
end
else begin : gen_blk6_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk8
assign in_payload = {in_data, in_channel};
assign {out_data, out_channel} = out_payload;
end
else begin : gen_blk8_else
assign out_channel = in_channel;
assign in_payload = in_data;
assign out_data = out_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Memory-based FIFO storage
//
// To allow a ready latency of 0, the read index is
// obtained from the next read pointer and memory
// outputs are unregistered.
//
// If the empty latency is 1, we infer bypass logic
// around the memory so writes propagate to the
// outputs on the next cycle.
//
// Do not change the way this is coded: Quartus needs
// a perfect match to the template, and any attempt to
// refactor the two always blocks into one will break
// memory inference.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk9
if (EMPTY_LATENCY == 1) begin : gen_blk10
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] = in_payload;
internal_out_payload = mem[mem_rd_ptr];
end
end else begin : gen_blk10_else
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] <= in_payload;
internal_out_payload <= mem[mem_rd_ptr];
end
end
assign mem_rd_ptr = next_rd_ptr;
end else begin : gen_blk9_else
// --------------------------------------------------
// Register-based FIFO storage
//
// Uses a shift register as the storage element. Each
// shift register slot has a bit which indicates if
// the slot is occupied (credit to Sam H for the idea).
// The occupancy bits are contiguous and start from the
// lsb, so 0000, 0001, 0011, 0111, 1111 for a 4-deep
// FIFO.
//
// Each slot is enabled during a read or when it
// is unoccupied. New data is always written to every
// going-to-be-empty slot (we keep track of which ones
// are actually useful with the occupancy bits). On a
// read we shift occupied slots.
//
// The exception is the last slot, which always gets
// new data when it is unoccupied.
// --------------------------------------------------
for (i = 0; i < DEPTH-1; i = i + 1) begin : shift_reg
always @(posedge clk or posedge reset) begin
if (reset) begin
mem[i] <= 0;
end
else if (read || !mem_used[i]) begin
if (!mem_used[i+1])
mem[i] <= in_payload;
else
mem[i] <= mem[i+1];
end
end
end
always @(posedge clk, posedge reset) begin
if (reset) begin
mem[DEPTH-1] <= 0;
end
else begin
if (DEPTH == 1) begin
if (write)
mem[DEPTH-1] <= in_payload;
end
else if (!mem_used[DEPTH-1])
mem[DEPTH-1] <= in_payload;
end
end
end
endgenerate
assign read = internal_out_ready && internal_out_valid && ok_to_forward;
assign write = in_ready && in_valid;
// --------------------------------------------------
// Pointer Management
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk11
assign incremented_wr_ptr = wr_ptr + 1'b1;
assign incremented_rd_ptr = rd_ptr + 1'b1;
assign next_wr_ptr = drop_on_error ? curr_sop_ptr : write ? incremented_wr_ptr : wr_ptr;
assign next_rd_ptr = (read) ? incremented_rd_ptr : rd_ptr;
always @(posedge clk or posedge reset) begin
if (reset) begin
wr_ptr <= 0;
rd_ptr <= 0;
end
else begin
wr_ptr <= next_wr_ptr;
rd_ptr <= next_rd_ptr;
end
end
end else begin : gen_blk11_else
// --------------------------------------------------
// Shift Register Occupancy Bits
//
// Consider a 4-deep FIFO with 2 entries: 0011
// On a read and write, do not modify the bits.
// On a write, left-shift the bits to get 0111.
// On a read, right-shift the bits to get 0001.
//
// Also, on a write we set bit0 (the head), while
// clearing the tail on a read.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[0] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[0] <= 1;
else if (read) begin
if (DEPTH > 1)
mem_used[0] <= mem_used[1];
else
mem_used[0] <= 0;
end
end
end
end
if (DEPTH > 1) begin : gen_blk12
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[DEPTH-1] <= 0;
end
else begin
if (write ^ read) begin
mem_used[DEPTH-1] <= 0;
if (write)
mem_used[DEPTH-1] <= mem_used[DEPTH-2];
end
end
end
end
for (i = 1; i < DEPTH-1; i = i + 1) begin : storage_logic
always @(posedge clk, posedge reset) begin
if (reset) begin
mem_used[i] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[i] <= mem_used[i-1];
else if (read)
mem_used[i] <= mem_used[i+1];
end
end
end
end
end
endgenerate
// --------------------------------------------------
// Memory FIFO Status Management
//
// Generates the full and empty signals from the
// pointers. The FIFO is full when the next write
// pointer will be equal to the read pointer after
// a write. Reading from a FIFO clears full.
//
// The FIFO is empty when the next read pointer will
// be equal to the write pointer after a read. Writing
// to a FIFO clears empty.
//
// A simultaneous read and write must not change any of
// the empty or full flags unless there is a drop on error event.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk13
always @* begin
next_full = full;
next_empty = empty;
if (read && !write) begin
next_full = 1'b0;
if (incremented_rd_ptr == wr_ptr)
next_empty = 1'b1;
end
if (write && !read) begin
if (!drop_on_error)
next_empty = 1'b0;
else if (curr_sop_ptr == rd_ptr) // drop on error and only 1 pkt in fifo
next_empty = 1'b1;
if (incremented_wr_ptr == rd_ptr && !drop_on_error)
next_full = 1'b1;
end
if (write && read && drop_on_error) begin
if (curr_sop_ptr == next_rd_ptr)
next_empty = 1'b1;
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
empty <= 1;
full <= 0;
end
else begin
empty <= next_empty;
full <= next_full;
end
end
end else begin : gen_blk13_else
// --------------------------------------------------
// Register FIFO Status Management
//
// Full when the tail occupancy bit is 1. Empty when
// the head occupancy bit is 0.
// --------------------------------------------------
always @* begin
full = mem_used[DEPTH-1];
empty = !mem_used[0];
// ------------------------------------------
// For a single slot FIFO, reading clears the
// full status immediately.
// ------------------------------------------
if (DEPTH == 1)
full = mem_used[0] && !read;
internal_out_payload = mem[0];
// ------------------------------------------
// Writes clear empty immediately for lookahead modes.
// Note that we use in_valid instead of write to avoid
// combinational loops (in lookahead mode, qualifying
// with in_ready is meaningless).
//
// In a 1-deep FIFO, a possible combinational loop runs
// from write -> out_valid -> out_ready -> write
// ------------------------------------------
if (EMPTY_LATENCY == 0) begin
empty = !mem_used[0] && !in_valid;
if (!mem_used[0] && in_valid)
internal_out_payload = in_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Avalon-ST Signals
//
// The in_ready signal is straightforward.
//
// To match memory latency when empty latency > 1,
// out_valid assertions must be delayed by one clock
// cycle.
//
// Note: out_valid deassertions must not be delayed or
// the FIFO will underflow.
// --------------------------------------------------
assign in_ready = !full;
assign internal_out_ready = out_ready || !out_valid;
generate if (EMPTY_LATENCY > 1) begin : gen_blk14
always @(posedge clk or posedge reset) begin
if (reset)
internal_out_valid <= 0;
else begin
internal_out_valid <= !empty & ok_to_forward & ~drop_on_error;
if (read) begin
if (incremented_rd_ptr == wr_ptr)
internal_out_valid <= 1'b0;
end
end
end
end else begin : gen_blk14_else
always @* begin
internal_out_valid = !empty & ok_to_forward;
end
end
endgenerate
// --------------------------------------------------
// Single Output Pipeline Stage
//
// This output pipeline stage is enabled if the FIFO's
// empty latency is set to 3 (default). It is disabled
// for all other allowed latencies.
//
// Reason: The memory outputs are unregistered, so we have to
// register the output or fmax will drop if combinatorial
// logic is present on the output datapath.
//
// Q: The Avalon-ST spec says that I have to register my outputs
// But isn't the memory counted as a register?
// A: The path from the address lookup to the memory output is
// slow. Registering the memory outputs is a good idea.
//
// The registers get packed into the memory by the fitter
// which means minimal resources are consumed (the result
// is a altsyncram with registered outputs, available on
// all modern Altera devices).
//
// This output stage acts as an extra slot in the FIFO,
// and complicates the fill level.
// --------------------------------------------------
generate if (EMPTY_LATENCY == 3) begin : gen_blk15
always @(posedge clk or posedge reset) begin
if (reset) begin
out_valid <= 0;
out_payload <= 0;
end
else begin
if (internal_out_ready) begin
out_valid <= internal_out_valid & ok_to_forward;
out_payload <= internal_out_payload;
end
end
end
end
else begin : gen_blk15_else
always @* begin
out_valid = internal_out_valid;
out_payload = internal_out_payload;
end
end
endgenerate
// --------------------------------------------------
// Fill Level
//
// The fill level is calculated from the next write
// and read pointers to avoid unnecessary latency
// and logic.
//
// However, if the store-and-forward mode of the FIFO
// is enabled, the fill level is an up-down counter
// for fmax optimization reasons.
//
// If the output pipeline is enabled, the fill level
// must account for it, or we'll always be off by one.
// This may, or may not be important depending on the
// application.
//
// For now, we'll always calculate the exact fill level
// at the cost of an extra adder when the output stage
// is enabled.
// --------------------------------------------------
generate if (USE_FILL_LEVEL) begin : gen_blk16
wire [31:0] depth32;
assign depth32 = DEPTH;
if (USE_STORE_FORWARD) begin
reg [ADDR_WIDTH : 0] curr_packet_len_less_one;
// --------------------------------------------------
// We only drop on endofpacket. As long as we don't add to the fill
// level on the dropped endofpacket cycle, we can simply subtract
// (packet length - 1) from the fill level for dropped packets.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
curr_packet_len_less_one <= 0;
end else begin
if (write) begin
curr_packet_len_less_one <= curr_packet_len_less_one + 1'b1;
if (in_endofpacket)
curr_packet_len_less_one <= 0;
end
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
fifo_fill_level <= 0;
end else if (drop_on_error) begin
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one;
if (read)
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one - 1'b1;
end else if (write && !read) begin
fifo_fill_level <= fifo_fill_level + 1'b1;
end else if (read && !write) begin
fifo_fill_level <= fifo_fill_level - 1'b1;
end
end
end else begin
always @(posedge clk or posedge reset) begin
if (reset)
fifo_fill_level <= 0;
else if (next_full & !drop_on_error)
fifo_fill_level <= depth32[ADDR_WIDTH:0];
else begin
fifo_fill_level[ADDR_WIDTH] <= 1'b0;
fifo_fill_level[ADDR_WIDTH-1 : 0] <= next_wr_ptr - next_rd_ptr;
end
end
end
always @* begin
fill_level = fifo_fill_level;
if (EMPTY_LATENCY == 3)
fill_level = fifo_fill_level + {{ADDR_WIDTH{1'b0}}, out_valid};
end
end
else begin : gen_blk16_else
always @* begin
fill_level = 0;
end
end
endgenerate
generate if (USE_ALMOST_FULL_IF) begin : gen_blk17
assign almost_full_data = (fill_level >= almost_full_threshold);
end
else
assign almost_full_data = 0;
endgenerate
generate if (USE_ALMOST_EMPTY_IF) begin : gen_blk18
assign almost_empty_data = (fill_level <= almost_empty_threshold);
end
else
assign almost_empty_data = 0;
endgenerate
// --------------------------------------------------
// Avalon-MM Status & Control Connection Point
//
// Register map:
//
// | Addr | RW | 31 - 0 |
// | 0 | R | Fill level |
//
// The registering of this connection point means
// that there is a cycle of latency between
// reads/writes and the updating of the fill level.
// --------------------------------------------------
generate if (USE_STORE_FORWARD) begin : gen_blk19
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
cut_through_threshold <= 0;
drop_on_error_en <= 0;
csr_readdata <= 0;
pkt_mode <= 1'b1;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 5)
csr_readdata <= {31'b0, drop_on_error_en};
else if (csr_address == 4)
csr_readdata <= {8'b0, cut_through_threshold};
else if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b101)
drop_on_error_en <= csr_writedata[0];
else if(csr_address == 3'b100) begin
cut_through_threshold <= csr_writedata[23:0];
pkt_mode <= (csr_writedata[23:0] == 0);
end
else if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else if (USE_ALMOST_FULL_IF || USE_ALMOST_EMPTY_IF) begin : gen_blk19_else1
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
csr_readdata <= 0;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else begin : gen_blk19_else2
always @(posedge clk or posedge reset) begin
if (reset) begin
csr_readdata <= 0;
end
else if (csr_read) begin
csr_readdata <= 0;
if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
end
end
endgenerate
// --------------------------------------------------
// Store and forward logic
// --------------------------------------------------
// if the fifo gets full before the entire packet or the
// cut-threshold condition is met then start sending out
// data in order to avoid dead-lock situation
generate if (USE_STORE_FORWARD) begin : gen_blk20
assign wait_for_threshold = (fifo_fill_level_lt_cut_through_threshold) & wait_for_pkt ;
assign wait_for_pkt = pkt_cnt_eq_zero | (pkt_cnt_eq_one & out_pkt_leave);
assign ok_to_forward = (pkt_mode ? (~wait_for_pkt | ~pkt_has_started) :
~wait_for_threshold) | fifo_too_small_r;
assign in_pkt_eop_arrive = in_valid & in_ready & in_endofpacket;
assign in_pkt_start = in_valid & in_ready & in_startofpacket;
assign in_pkt_error = in_valid & in_ready & |in_error;
assign out_pkt_sop_leave = out_valid & out_ready & out_startofpacket;
assign out_pkt_leave = out_valid & out_ready & out_endofpacket;
assign fifo_too_small = (pkt_mode ? wait_for_pkt : wait_for_threshold) & full & out_ready;
// count packets coming and going into the fifo
always @(posedge clk or posedge reset) begin
if (reset) begin
pkt_cnt <= 0;
pkt_has_started <= 0;
sop_has_left_fifo <= 0;
fifo_too_small_r <= 0;
pkt_cnt_eq_zero <= 1'b1;
pkt_cnt_eq_one <= 1'b0;
fifo_fill_level_lt_cut_through_threshold <= 1'b1;
end
else begin
fifo_fill_level_lt_cut_through_threshold <= fifo_fill_level < cut_through_threshold;
fifo_too_small_r <= fifo_too_small;
if( in_pkt_eop_arrive )
sop_has_left_fifo <= 1'b0;
else if (out_pkt_sop_leave & pkt_cnt_eq_zero )
sop_has_left_fifo <= 1'b1;
if (in_pkt_eop_arrive & ~out_pkt_leave & ~drop_on_error ) begin
pkt_cnt <= pkt_cnt + 1'b1;
pkt_cnt_eq_zero <= 0;
if (pkt_cnt == 0)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
else if((~in_pkt_eop_arrive | drop_on_error) & out_pkt_leave) begin
pkt_cnt <= pkt_cnt - 1'b1;
if (pkt_cnt == 1)
pkt_cnt_eq_zero <= 1'b1;
else
pkt_cnt_eq_zero <= 1'b0;
if (pkt_cnt == 2)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
if (in_pkt_start)
pkt_has_started <= 1'b1;
else if (in_pkt_eop_arrive)
pkt_has_started <= 1'b0;
end
end
// drop on error logic
always @(posedge clk or posedge reset) begin
if (reset) begin
sop_ptr <= 0;
error_in_pkt <= 0;
end
else begin
// save the location of the SOP
if ( in_pkt_start )
sop_ptr <= wr_ptr;
// remember if error in pkt
// log error only if packet has already started
if (in_pkt_eop_arrive)
error_in_pkt <= 1'b0;
else if ( in_pkt_error & (pkt_has_started | in_pkt_start))
error_in_pkt <= 1'b1;
end
end
assign drop_on_error = drop_on_error_en & (error_in_pkt | in_pkt_error) & in_pkt_eop_arrive &
~sop_has_left_fifo & ~(out_pkt_sop_leave & pkt_cnt_eq_zero);
assign curr_sop_ptr = (write && in_startofpacket && in_endofpacket) ? wr_ptr : sop_ptr;
end
else begin : gen_blk20_else
assign ok_to_forward = 1'b1;
assign drop_on_error = 1'b0;
if (ADDR_WIDTH <= 1)
assign curr_sop_ptr = 1'b0;
else
assign curr_sop_ptr = {ADDR_WIDTH - 1 { 1'b0 }};
end
endgenerate
// --------------------------------------------------
// Calculates the log2ceil of the input value
// --------------------------------------------------
function integer log2ceil;
input integer val;
reg[31:0] i;
begin
i = 1;
log2ceil = 0;
while (i < val) begin
log2ceil = log2ceil + 1;
i = i[30:0] << 1;
end
end
endfunction
endmodule
|
// -----------------------------------------------------------
// Legal Notice: (C)2007 Altera Corporation. All rights reserved. Your
// use of Altera Corporation's design tools, logic functions and other
// software and tools, and its AMPP partner logic functions, and any
// output files any of the foregoing (including device programming or
// simulation files), and any associated documentation or information are
// expressly subject to the terms and conditions of the Altera Program
// License Subscription Agreement or other applicable license agreement,
// including, without limitation, that your use is for the sole purpose
// of programming logic devices manufactured by Altera and sold by Altera
// or its authorized distributors. Please refer to the applicable
// agreement for further details.
//
// Description: Single clock Avalon-ST FIFO.
// -----------------------------------------------------------
`timescale 1 ns / 1 ns
//altera message_off 10036
module altera_avalon_sc_fifo
#(
// --------------------------------------------------
// Parameters
// --------------------------------------------------
parameter SYMBOLS_PER_BEAT = 1,
parameter BITS_PER_SYMBOL = 8,
parameter FIFO_DEPTH = 16,
parameter CHANNEL_WIDTH = 0,
parameter ERROR_WIDTH = 0,
parameter USE_PACKETS = 0,
parameter USE_FILL_LEVEL = 0,
parameter USE_STORE_FORWARD = 0,
parameter USE_ALMOST_FULL_IF = 0,
parameter USE_ALMOST_EMPTY_IF = 0,
// --------------------------------------------------
// Empty latency is defined as the number of cycles
// required for a write to deassert the empty flag.
// For example, a latency of 1 means that the empty
// flag is deasserted on the cycle after a write.
//
// Another way to think of it is the latency for a
// write to propagate to the output.
//
// An empty latency of 0 implies lookahead, which is
// only implemented for the register-based FIFO.
// --------------------------------------------------
parameter EMPTY_LATENCY = 3,
parameter USE_MEMORY_BLOCKS = 1,
// --------------------------------------------------
// Internal Parameters
// --------------------------------------------------
parameter DATA_WIDTH = SYMBOLS_PER_BEAT * BITS_PER_SYMBOL,
parameter EMPTY_WIDTH = log2ceil(SYMBOLS_PER_BEAT)
)
(
// --------------------------------------------------
// Ports
// --------------------------------------------------
input clk,
input reset,
input [DATA_WIDTH-1: 0] in_data,
input in_valid,
input in_startofpacket,
input in_endofpacket,
input [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] in_empty,
input [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] in_error,
input [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] in_channel,
output in_ready,
output [DATA_WIDTH-1 : 0] out_data,
output reg out_valid,
output out_startofpacket,
output out_endofpacket,
output [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] out_empty,
output [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] out_error,
output [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] out_channel,
input out_ready,
input [(USE_STORE_FORWARD ? 2 : 1) : 0] csr_address,
input csr_write,
input csr_read,
input [31 : 0] csr_writedata,
output reg [31 : 0] csr_readdata,
output wire almost_full_data,
output wire almost_empty_data
);
// --------------------------------------------------
// Local Parameters
// --------------------------------------------------
localparam ADDR_WIDTH = log2ceil(FIFO_DEPTH);
localparam DEPTH = FIFO_DEPTH;
localparam PKT_SIGNALS_WIDTH = 2 + EMPTY_WIDTH;
localparam PAYLOAD_WIDTH = (USE_PACKETS == 1) ?
2 + EMPTY_WIDTH + DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH:
DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH;
// --------------------------------------------------
// Internal Signals
// --------------------------------------------------
genvar i;
reg [PAYLOAD_WIDTH-1 : 0] mem [DEPTH-1 : 0];
reg [ADDR_WIDTH-1 : 0] wr_ptr;
reg [ADDR_WIDTH-1 : 0] rd_ptr;
reg [DEPTH-1 : 0] mem_used;
wire [ADDR_WIDTH-1 : 0] next_wr_ptr;
wire [ADDR_WIDTH-1 : 0] next_rd_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_wr_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_rd_ptr;
wire [ADDR_WIDTH-1 : 0] mem_rd_ptr;
wire read;
wire write;
reg empty;
reg next_empty;
reg full;
reg next_full;
wire [PKT_SIGNALS_WIDTH-1 : 0] in_packet_signals;
wire [PKT_SIGNALS_WIDTH-1 : 0] out_packet_signals;
wire [PAYLOAD_WIDTH-1 : 0] in_payload;
reg [PAYLOAD_WIDTH-1 : 0] internal_out_payload;
reg [PAYLOAD_WIDTH-1 : 0] out_payload;
reg internal_out_valid;
wire internal_out_ready;
reg [ADDR_WIDTH : 0] fifo_fill_level;
reg [ADDR_WIDTH : 0] fill_level;
reg [ADDR_WIDTH-1 : 0] sop_ptr = 0;
wire [ADDR_WIDTH-1 : 0] curr_sop_ptr;
reg [23:0] almost_full_threshold;
reg [23:0] almost_empty_threshold;
reg [23:0] cut_through_threshold;
reg [15:0] pkt_cnt;
reg drop_on_error_en;
reg error_in_pkt;
reg pkt_has_started;
reg sop_has_left_fifo;
reg fifo_too_small_r;
reg pkt_cnt_eq_zero;
reg pkt_cnt_eq_one;
wire wait_for_threshold;
reg pkt_mode;
wire wait_for_pkt;
wire ok_to_forward;
wire in_pkt_eop_arrive;
wire out_pkt_leave;
wire in_pkt_start;
wire in_pkt_error;
wire drop_on_error;
wire fifo_too_small;
wire out_pkt_sop_leave;
wire [31:0] max_fifo_size;
reg fifo_fill_level_lt_cut_through_threshold;
// --------------------------------------------------
// Define Payload
//
// Icky part where we decide which signals form the
// payload to the FIFO with generate blocks.
// --------------------------------------------------
generate
if (EMPTY_WIDTH > 0) begin : gen_blk1
assign in_packet_signals = {in_startofpacket, in_endofpacket, in_empty};
assign {out_startofpacket, out_endofpacket, out_empty} = out_packet_signals;
end
else begin : gen_blk1_else
assign out_empty = in_error;
assign in_packet_signals = {in_startofpacket, in_endofpacket};
assign {out_startofpacket, out_endofpacket} = out_packet_signals;
end
endgenerate
generate
if (USE_PACKETS) begin : gen_blk2
if (ERROR_WIDTH > 0) begin : gen_blk3
if (CHANNEL_WIDTH > 0) begin : gen_blk4
assign in_payload = {in_packet_signals, in_data, in_error, in_channel};
assign {out_packet_signals, out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk4_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data, in_error};
assign {out_packet_signals, out_data, out_error} = out_payload;
end
end
else begin : gen_blk3_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk5
assign in_payload = {in_packet_signals, in_data, in_channel};
assign {out_packet_signals, out_data, out_channel} = out_payload;
end
else begin : gen_blk5_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data};
assign {out_packet_signals, out_data} = out_payload;
end
end
end
else begin : gen_blk2_else
assign out_packet_signals = 0;
if (ERROR_WIDTH > 0) begin : gen_blk6
if (CHANNEL_WIDTH > 0) begin : gen_blk7
assign in_payload = {in_data, in_error, in_channel};
assign {out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk7_else
assign out_channel = in_channel;
assign in_payload = {in_data, in_error};
assign {out_data, out_error} = out_payload;
end
end
else begin : gen_blk6_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk8
assign in_payload = {in_data, in_channel};
assign {out_data, out_channel} = out_payload;
end
else begin : gen_blk8_else
assign out_channel = in_channel;
assign in_payload = in_data;
assign out_data = out_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Memory-based FIFO storage
//
// To allow a ready latency of 0, the read index is
// obtained from the next read pointer and memory
// outputs are unregistered.
//
// If the empty latency is 1, we infer bypass logic
// around the memory so writes propagate to the
// outputs on the next cycle.
//
// Do not change the way this is coded: Quartus needs
// a perfect match to the template, and any attempt to
// refactor the two always blocks into one will break
// memory inference.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk9
if (EMPTY_LATENCY == 1) begin : gen_blk10
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] = in_payload;
internal_out_payload = mem[mem_rd_ptr];
end
end else begin : gen_blk10_else
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] <= in_payload;
internal_out_payload <= mem[mem_rd_ptr];
end
end
assign mem_rd_ptr = next_rd_ptr;
end else begin : gen_blk9_else
// --------------------------------------------------
// Register-based FIFO storage
//
// Uses a shift register as the storage element. Each
// shift register slot has a bit which indicates if
// the slot is occupied (credit to Sam H for the idea).
// The occupancy bits are contiguous and start from the
// lsb, so 0000, 0001, 0011, 0111, 1111 for a 4-deep
// FIFO.
//
// Each slot is enabled during a read or when it
// is unoccupied. New data is always written to every
// going-to-be-empty slot (we keep track of which ones
// are actually useful with the occupancy bits). On a
// read we shift occupied slots.
//
// The exception is the last slot, which always gets
// new data when it is unoccupied.
// --------------------------------------------------
for (i = 0; i < DEPTH-1; i = i + 1) begin : shift_reg
always @(posedge clk or posedge reset) begin
if (reset) begin
mem[i] <= 0;
end
else if (read || !mem_used[i]) begin
if (!mem_used[i+1])
mem[i] <= in_payload;
else
mem[i] <= mem[i+1];
end
end
end
always @(posedge clk, posedge reset) begin
if (reset) begin
mem[DEPTH-1] <= 0;
end
else begin
if (DEPTH == 1) begin
if (write)
mem[DEPTH-1] <= in_payload;
end
else if (!mem_used[DEPTH-1])
mem[DEPTH-1] <= in_payload;
end
end
end
endgenerate
assign read = internal_out_ready && internal_out_valid && ok_to_forward;
assign write = in_ready && in_valid;
// --------------------------------------------------
// Pointer Management
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk11
assign incremented_wr_ptr = wr_ptr + 1'b1;
assign incremented_rd_ptr = rd_ptr + 1'b1;
assign next_wr_ptr = drop_on_error ? curr_sop_ptr : write ? incremented_wr_ptr : wr_ptr;
assign next_rd_ptr = (read) ? incremented_rd_ptr : rd_ptr;
always @(posedge clk or posedge reset) begin
if (reset) begin
wr_ptr <= 0;
rd_ptr <= 0;
end
else begin
wr_ptr <= next_wr_ptr;
rd_ptr <= next_rd_ptr;
end
end
end else begin : gen_blk11_else
// --------------------------------------------------
// Shift Register Occupancy Bits
//
// Consider a 4-deep FIFO with 2 entries: 0011
// On a read and write, do not modify the bits.
// On a write, left-shift the bits to get 0111.
// On a read, right-shift the bits to get 0001.
//
// Also, on a write we set bit0 (the head), while
// clearing the tail on a read.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[0] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[0] <= 1;
else if (read) begin
if (DEPTH > 1)
mem_used[0] <= mem_used[1];
else
mem_used[0] <= 0;
end
end
end
end
if (DEPTH > 1) begin : gen_blk12
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[DEPTH-1] <= 0;
end
else begin
if (write ^ read) begin
mem_used[DEPTH-1] <= 0;
if (write)
mem_used[DEPTH-1] <= mem_used[DEPTH-2];
end
end
end
end
for (i = 1; i < DEPTH-1; i = i + 1) begin : storage_logic
always @(posedge clk, posedge reset) begin
if (reset) begin
mem_used[i] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[i] <= mem_used[i-1];
else if (read)
mem_used[i] <= mem_used[i+1];
end
end
end
end
end
endgenerate
// --------------------------------------------------
// Memory FIFO Status Management
//
// Generates the full and empty signals from the
// pointers. The FIFO is full when the next write
// pointer will be equal to the read pointer after
// a write. Reading from a FIFO clears full.
//
// The FIFO is empty when the next read pointer will
// be equal to the write pointer after a read. Writing
// to a FIFO clears empty.
//
// A simultaneous read and write must not change any of
// the empty or full flags unless there is a drop on error event.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk13
always @* begin
next_full = full;
next_empty = empty;
if (read && !write) begin
next_full = 1'b0;
if (incremented_rd_ptr == wr_ptr)
next_empty = 1'b1;
end
if (write && !read) begin
if (!drop_on_error)
next_empty = 1'b0;
else if (curr_sop_ptr == rd_ptr) // drop on error and only 1 pkt in fifo
next_empty = 1'b1;
if (incremented_wr_ptr == rd_ptr && !drop_on_error)
next_full = 1'b1;
end
if (write && read && drop_on_error) begin
if (curr_sop_ptr == next_rd_ptr)
next_empty = 1'b1;
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
empty <= 1;
full <= 0;
end
else begin
empty <= next_empty;
full <= next_full;
end
end
end else begin : gen_blk13_else
// --------------------------------------------------
// Register FIFO Status Management
//
// Full when the tail occupancy bit is 1. Empty when
// the head occupancy bit is 0.
// --------------------------------------------------
always @* begin
full = mem_used[DEPTH-1];
empty = !mem_used[0];
// ------------------------------------------
// For a single slot FIFO, reading clears the
// full status immediately.
// ------------------------------------------
if (DEPTH == 1)
full = mem_used[0] && !read;
internal_out_payload = mem[0];
// ------------------------------------------
// Writes clear empty immediately for lookahead modes.
// Note that we use in_valid instead of write to avoid
// combinational loops (in lookahead mode, qualifying
// with in_ready is meaningless).
//
// In a 1-deep FIFO, a possible combinational loop runs
// from write -> out_valid -> out_ready -> write
// ------------------------------------------
if (EMPTY_LATENCY == 0) begin
empty = !mem_used[0] && !in_valid;
if (!mem_used[0] && in_valid)
internal_out_payload = in_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Avalon-ST Signals
//
// The in_ready signal is straightforward.
//
// To match memory latency when empty latency > 1,
// out_valid assertions must be delayed by one clock
// cycle.
//
// Note: out_valid deassertions must not be delayed or
// the FIFO will underflow.
// --------------------------------------------------
assign in_ready = !full;
assign internal_out_ready = out_ready || !out_valid;
generate if (EMPTY_LATENCY > 1) begin : gen_blk14
always @(posedge clk or posedge reset) begin
if (reset)
internal_out_valid <= 0;
else begin
internal_out_valid <= !empty & ok_to_forward & ~drop_on_error;
if (read) begin
if (incremented_rd_ptr == wr_ptr)
internal_out_valid <= 1'b0;
end
end
end
end else begin : gen_blk14_else
always @* begin
internal_out_valid = !empty & ok_to_forward;
end
end
endgenerate
// --------------------------------------------------
// Single Output Pipeline Stage
//
// This output pipeline stage is enabled if the FIFO's
// empty latency is set to 3 (default). It is disabled
// for all other allowed latencies.
//
// Reason: The memory outputs are unregistered, so we have to
// register the output or fmax will drop if combinatorial
// logic is present on the output datapath.
//
// Q: The Avalon-ST spec says that I have to register my outputs
// But isn't the memory counted as a register?
// A: The path from the address lookup to the memory output is
// slow. Registering the memory outputs is a good idea.
//
// The registers get packed into the memory by the fitter
// which means minimal resources are consumed (the result
// is a altsyncram with registered outputs, available on
// all modern Altera devices).
//
// This output stage acts as an extra slot in the FIFO,
// and complicates the fill level.
// --------------------------------------------------
generate if (EMPTY_LATENCY == 3) begin : gen_blk15
always @(posedge clk or posedge reset) begin
if (reset) begin
out_valid <= 0;
out_payload <= 0;
end
else begin
if (internal_out_ready) begin
out_valid <= internal_out_valid & ok_to_forward;
out_payload <= internal_out_payload;
end
end
end
end
else begin : gen_blk15_else
always @* begin
out_valid = internal_out_valid;
out_payload = internal_out_payload;
end
end
endgenerate
// --------------------------------------------------
// Fill Level
//
// The fill level is calculated from the next write
// and read pointers to avoid unnecessary latency
// and logic.
//
// However, if the store-and-forward mode of the FIFO
// is enabled, the fill level is an up-down counter
// for fmax optimization reasons.
//
// If the output pipeline is enabled, the fill level
// must account for it, or we'll always be off by one.
// This may, or may not be important depending on the
// application.
//
// For now, we'll always calculate the exact fill level
// at the cost of an extra adder when the output stage
// is enabled.
// --------------------------------------------------
generate if (USE_FILL_LEVEL) begin : gen_blk16
wire [31:0] depth32;
assign depth32 = DEPTH;
if (USE_STORE_FORWARD) begin
reg [ADDR_WIDTH : 0] curr_packet_len_less_one;
// --------------------------------------------------
// We only drop on endofpacket. As long as we don't add to the fill
// level on the dropped endofpacket cycle, we can simply subtract
// (packet length - 1) from the fill level for dropped packets.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
curr_packet_len_less_one <= 0;
end else begin
if (write) begin
curr_packet_len_less_one <= curr_packet_len_less_one + 1'b1;
if (in_endofpacket)
curr_packet_len_less_one <= 0;
end
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
fifo_fill_level <= 0;
end else if (drop_on_error) begin
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one;
if (read)
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one - 1'b1;
end else if (write && !read) begin
fifo_fill_level <= fifo_fill_level + 1'b1;
end else if (read && !write) begin
fifo_fill_level <= fifo_fill_level - 1'b1;
end
end
end else begin
always @(posedge clk or posedge reset) begin
if (reset)
fifo_fill_level <= 0;
else if (next_full & !drop_on_error)
fifo_fill_level <= depth32[ADDR_WIDTH:0];
else begin
fifo_fill_level[ADDR_WIDTH] <= 1'b0;
fifo_fill_level[ADDR_WIDTH-1 : 0] <= next_wr_ptr - next_rd_ptr;
end
end
end
always @* begin
fill_level = fifo_fill_level;
if (EMPTY_LATENCY == 3)
fill_level = fifo_fill_level + {{ADDR_WIDTH{1'b0}}, out_valid};
end
end
else begin : gen_blk16_else
always @* begin
fill_level = 0;
end
end
endgenerate
generate if (USE_ALMOST_FULL_IF) begin : gen_blk17
assign almost_full_data = (fill_level >= almost_full_threshold);
end
else
assign almost_full_data = 0;
endgenerate
generate if (USE_ALMOST_EMPTY_IF) begin : gen_blk18
assign almost_empty_data = (fill_level <= almost_empty_threshold);
end
else
assign almost_empty_data = 0;
endgenerate
// --------------------------------------------------
// Avalon-MM Status & Control Connection Point
//
// Register map:
//
// | Addr | RW | 31 - 0 |
// | 0 | R | Fill level |
//
// The registering of this connection point means
// that there is a cycle of latency between
// reads/writes and the updating of the fill level.
// --------------------------------------------------
generate if (USE_STORE_FORWARD) begin : gen_blk19
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
cut_through_threshold <= 0;
drop_on_error_en <= 0;
csr_readdata <= 0;
pkt_mode <= 1'b1;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 5)
csr_readdata <= {31'b0, drop_on_error_en};
else if (csr_address == 4)
csr_readdata <= {8'b0, cut_through_threshold};
else if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b101)
drop_on_error_en <= csr_writedata[0];
else if(csr_address == 3'b100) begin
cut_through_threshold <= csr_writedata[23:0];
pkt_mode <= (csr_writedata[23:0] == 0);
end
else if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else if (USE_ALMOST_FULL_IF || USE_ALMOST_EMPTY_IF) begin : gen_blk19_else1
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
csr_readdata <= 0;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else begin : gen_blk19_else2
always @(posedge clk or posedge reset) begin
if (reset) begin
csr_readdata <= 0;
end
else if (csr_read) begin
csr_readdata <= 0;
if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
end
end
endgenerate
// --------------------------------------------------
// Store and forward logic
// --------------------------------------------------
// if the fifo gets full before the entire packet or the
// cut-threshold condition is met then start sending out
// data in order to avoid dead-lock situation
generate if (USE_STORE_FORWARD) begin : gen_blk20
assign wait_for_threshold = (fifo_fill_level_lt_cut_through_threshold) & wait_for_pkt ;
assign wait_for_pkt = pkt_cnt_eq_zero | (pkt_cnt_eq_one & out_pkt_leave);
assign ok_to_forward = (pkt_mode ? (~wait_for_pkt | ~pkt_has_started) :
~wait_for_threshold) | fifo_too_small_r;
assign in_pkt_eop_arrive = in_valid & in_ready & in_endofpacket;
assign in_pkt_start = in_valid & in_ready & in_startofpacket;
assign in_pkt_error = in_valid & in_ready & |in_error;
assign out_pkt_sop_leave = out_valid & out_ready & out_startofpacket;
assign out_pkt_leave = out_valid & out_ready & out_endofpacket;
assign fifo_too_small = (pkt_mode ? wait_for_pkt : wait_for_threshold) & full & out_ready;
// count packets coming and going into the fifo
always @(posedge clk or posedge reset) begin
if (reset) begin
pkt_cnt <= 0;
pkt_has_started <= 0;
sop_has_left_fifo <= 0;
fifo_too_small_r <= 0;
pkt_cnt_eq_zero <= 1'b1;
pkt_cnt_eq_one <= 1'b0;
fifo_fill_level_lt_cut_through_threshold <= 1'b1;
end
else begin
fifo_fill_level_lt_cut_through_threshold <= fifo_fill_level < cut_through_threshold;
fifo_too_small_r <= fifo_too_small;
if( in_pkt_eop_arrive )
sop_has_left_fifo <= 1'b0;
else if (out_pkt_sop_leave & pkt_cnt_eq_zero )
sop_has_left_fifo <= 1'b1;
if (in_pkt_eop_arrive & ~out_pkt_leave & ~drop_on_error ) begin
pkt_cnt <= pkt_cnt + 1'b1;
pkt_cnt_eq_zero <= 0;
if (pkt_cnt == 0)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
else if((~in_pkt_eop_arrive | drop_on_error) & out_pkt_leave) begin
pkt_cnt <= pkt_cnt - 1'b1;
if (pkt_cnt == 1)
pkt_cnt_eq_zero <= 1'b1;
else
pkt_cnt_eq_zero <= 1'b0;
if (pkt_cnt == 2)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
if (in_pkt_start)
pkt_has_started <= 1'b1;
else if (in_pkt_eop_arrive)
pkt_has_started <= 1'b0;
end
end
// drop on error logic
always @(posedge clk or posedge reset) begin
if (reset) begin
sop_ptr <= 0;
error_in_pkt <= 0;
end
else begin
// save the location of the SOP
if ( in_pkt_start )
sop_ptr <= wr_ptr;
// remember if error in pkt
// log error only if packet has already started
if (in_pkt_eop_arrive)
error_in_pkt <= 1'b0;
else if ( in_pkt_error & (pkt_has_started | in_pkt_start))
error_in_pkt <= 1'b1;
end
end
assign drop_on_error = drop_on_error_en & (error_in_pkt | in_pkt_error) & in_pkt_eop_arrive &
~sop_has_left_fifo & ~(out_pkt_sop_leave & pkt_cnt_eq_zero);
assign curr_sop_ptr = (write && in_startofpacket && in_endofpacket) ? wr_ptr : sop_ptr;
end
else begin : gen_blk20_else
assign ok_to_forward = 1'b1;
assign drop_on_error = 1'b0;
if (ADDR_WIDTH <= 1)
assign curr_sop_ptr = 1'b0;
else
assign curr_sop_ptr = {ADDR_WIDTH - 1 { 1'b0 }};
end
endgenerate
// --------------------------------------------------
// Calculates the log2ceil of the input value
// --------------------------------------------------
function integer log2ceil;
input integer val;
reg[31:0] i;
begin
i = 1;
log2ceil = 0;
while (i < val) begin
log2ceil = log2ceil + 1;
i = i[30:0] << 1;
end
end
endfunction
endmodule
|
// -----------------------------------------------------------
// Legal Notice: (C)2007 Altera Corporation. All rights reserved. Your
// use of Altera Corporation's design tools, logic functions and other
// software and tools, and its AMPP partner logic functions, and any
// output files any of the foregoing (including device programming or
// simulation files), and any associated documentation or information are
// expressly subject to the terms and conditions of the Altera Program
// License Subscription Agreement or other applicable license agreement,
// including, without limitation, that your use is for the sole purpose
// of programming logic devices manufactured by Altera and sold by Altera
// or its authorized distributors. Please refer to the applicable
// agreement for further details.
//
// Description: Single clock Avalon-ST FIFO.
// -----------------------------------------------------------
`timescale 1 ns / 1 ns
//altera message_off 10036
module altera_avalon_sc_fifo
#(
// --------------------------------------------------
// Parameters
// --------------------------------------------------
parameter SYMBOLS_PER_BEAT = 1,
parameter BITS_PER_SYMBOL = 8,
parameter FIFO_DEPTH = 16,
parameter CHANNEL_WIDTH = 0,
parameter ERROR_WIDTH = 0,
parameter USE_PACKETS = 0,
parameter USE_FILL_LEVEL = 0,
parameter USE_STORE_FORWARD = 0,
parameter USE_ALMOST_FULL_IF = 0,
parameter USE_ALMOST_EMPTY_IF = 0,
// --------------------------------------------------
// Empty latency is defined as the number of cycles
// required for a write to deassert the empty flag.
// For example, a latency of 1 means that the empty
// flag is deasserted on the cycle after a write.
//
// Another way to think of it is the latency for a
// write to propagate to the output.
//
// An empty latency of 0 implies lookahead, which is
// only implemented for the register-based FIFO.
// --------------------------------------------------
parameter EMPTY_LATENCY = 3,
parameter USE_MEMORY_BLOCKS = 1,
// --------------------------------------------------
// Internal Parameters
// --------------------------------------------------
parameter DATA_WIDTH = SYMBOLS_PER_BEAT * BITS_PER_SYMBOL,
parameter EMPTY_WIDTH = log2ceil(SYMBOLS_PER_BEAT)
)
(
// --------------------------------------------------
// Ports
// --------------------------------------------------
input clk,
input reset,
input [DATA_WIDTH-1: 0] in_data,
input in_valid,
input in_startofpacket,
input in_endofpacket,
input [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] in_empty,
input [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] in_error,
input [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] in_channel,
output in_ready,
output [DATA_WIDTH-1 : 0] out_data,
output reg out_valid,
output out_startofpacket,
output out_endofpacket,
output [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] out_empty,
output [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] out_error,
output [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] out_channel,
input out_ready,
input [(USE_STORE_FORWARD ? 2 : 1) : 0] csr_address,
input csr_write,
input csr_read,
input [31 : 0] csr_writedata,
output reg [31 : 0] csr_readdata,
output wire almost_full_data,
output wire almost_empty_data
);
// --------------------------------------------------
// Local Parameters
// --------------------------------------------------
localparam ADDR_WIDTH = log2ceil(FIFO_DEPTH);
localparam DEPTH = FIFO_DEPTH;
localparam PKT_SIGNALS_WIDTH = 2 + EMPTY_WIDTH;
localparam PAYLOAD_WIDTH = (USE_PACKETS == 1) ?
2 + EMPTY_WIDTH + DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH:
DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH;
// --------------------------------------------------
// Internal Signals
// --------------------------------------------------
genvar i;
reg [PAYLOAD_WIDTH-1 : 0] mem [DEPTH-1 : 0];
reg [ADDR_WIDTH-1 : 0] wr_ptr;
reg [ADDR_WIDTH-1 : 0] rd_ptr;
reg [DEPTH-1 : 0] mem_used;
wire [ADDR_WIDTH-1 : 0] next_wr_ptr;
wire [ADDR_WIDTH-1 : 0] next_rd_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_wr_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_rd_ptr;
wire [ADDR_WIDTH-1 : 0] mem_rd_ptr;
wire read;
wire write;
reg empty;
reg next_empty;
reg full;
reg next_full;
wire [PKT_SIGNALS_WIDTH-1 : 0] in_packet_signals;
wire [PKT_SIGNALS_WIDTH-1 : 0] out_packet_signals;
wire [PAYLOAD_WIDTH-1 : 0] in_payload;
reg [PAYLOAD_WIDTH-1 : 0] internal_out_payload;
reg [PAYLOAD_WIDTH-1 : 0] out_payload;
reg internal_out_valid;
wire internal_out_ready;
reg [ADDR_WIDTH : 0] fifo_fill_level;
reg [ADDR_WIDTH : 0] fill_level;
reg [ADDR_WIDTH-1 : 0] sop_ptr = 0;
wire [ADDR_WIDTH-1 : 0] curr_sop_ptr;
reg [23:0] almost_full_threshold;
reg [23:0] almost_empty_threshold;
reg [23:0] cut_through_threshold;
reg [15:0] pkt_cnt;
reg drop_on_error_en;
reg error_in_pkt;
reg pkt_has_started;
reg sop_has_left_fifo;
reg fifo_too_small_r;
reg pkt_cnt_eq_zero;
reg pkt_cnt_eq_one;
wire wait_for_threshold;
reg pkt_mode;
wire wait_for_pkt;
wire ok_to_forward;
wire in_pkt_eop_arrive;
wire out_pkt_leave;
wire in_pkt_start;
wire in_pkt_error;
wire drop_on_error;
wire fifo_too_small;
wire out_pkt_sop_leave;
wire [31:0] max_fifo_size;
reg fifo_fill_level_lt_cut_through_threshold;
// --------------------------------------------------
// Define Payload
//
// Icky part where we decide which signals form the
// payload to the FIFO with generate blocks.
// --------------------------------------------------
generate
if (EMPTY_WIDTH > 0) begin : gen_blk1
assign in_packet_signals = {in_startofpacket, in_endofpacket, in_empty};
assign {out_startofpacket, out_endofpacket, out_empty} = out_packet_signals;
end
else begin : gen_blk1_else
assign out_empty = in_error;
assign in_packet_signals = {in_startofpacket, in_endofpacket};
assign {out_startofpacket, out_endofpacket} = out_packet_signals;
end
endgenerate
generate
if (USE_PACKETS) begin : gen_blk2
if (ERROR_WIDTH > 0) begin : gen_blk3
if (CHANNEL_WIDTH > 0) begin : gen_blk4
assign in_payload = {in_packet_signals, in_data, in_error, in_channel};
assign {out_packet_signals, out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk4_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data, in_error};
assign {out_packet_signals, out_data, out_error} = out_payload;
end
end
else begin : gen_blk3_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk5
assign in_payload = {in_packet_signals, in_data, in_channel};
assign {out_packet_signals, out_data, out_channel} = out_payload;
end
else begin : gen_blk5_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data};
assign {out_packet_signals, out_data} = out_payload;
end
end
end
else begin : gen_blk2_else
assign out_packet_signals = 0;
if (ERROR_WIDTH > 0) begin : gen_blk6
if (CHANNEL_WIDTH > 0) begin : gen_blk7
assign in_payload = {in_data, in_error, in_channel};
assign {out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk7_else
assign out_channel = in_channel;
assign in_payload = {in_data, in_error};
assign {out_data, out_error} = out_payload;
end
end
else begin : gen_blk6_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk8
assign in_payload = {in_data, in_channel};
assign {out_data, out_channel} = out_payload;
end
else begin : gen_blk8_else
assign out_channel = in_channel;
assign in_payload = in_data;
assign out_data = out_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Memory-based FIFO storage
//
// To allow a ready latency of 0, the read index is
// obtained from the next read pointer and memory
// outputs are unregistered.
//
// If the empty latency is 1, we infer bypass logic
// around the memory so writes propagate to the
// outputs on the next cycle.
//
// Do not change the way this is coded: Quartus needs
// a perfect match to the template, and any attempt to
// refactor the two always blocks into one will break
// memory inference.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk9
if (EMPTY_LATENCY == 1) begin : gen_blk10
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] = in_payload;
internal_out_payload = mem[mem_rd_ptr];
end
end else begin : gen_blk10_else
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] <= in_payload;
internal_out_payload <= mem[mem_rd_ptr];
end
end
assign mem_rd_ptr = next_rd_ptr;
end else begin : gen_blk9_else
// --------------------------------------------------
// Register-based FIFO storage
//
// Uses a shift register as the storage element. Each
// shift register slot has a bit which indicates if
// the slot is occupied (credit to Sam H for the idea).
// The occupancy bits are contiguous and start from the
// lsb, so 0000, 0001, 0011, 0111, 1111 for a 4-deep
// FIFO.
//
// Each slot is enabled during a read or when it
// is unoccupied. New data is always written to every
// going-to-be-empty slot (we keep track of which ones
// are actually useful with the occupancy bits). On a
// read we shift occupied slots.
//
// The exception is the last slot, which always gets
// new data when it is unoccupied.
// --------------------------------------------------
for (i = 0; i < DEPTH-1; i = i + 1) begin : shift_reg
always @(posedge clk or posedge reset) begin
if (reset) begin
mem[i] <= 0;
end
else if (read || !mem_used[i]) begin
if (!mem_used[i+1])
mem[i] <= in_payload;
else
mem[i] <= mem[i+1];
end
end
end
always @(posedge clk, posedge reset) begin
if (reset) begin
mem[DEPTH-1] <= 0;
end
else begin
if (DEPTH == 1) begin
if (write)
mem[DEPTH-1] <= in_payload;
end
else if (!mem_used[DEPTH-1])
mem[DEPTH-1] <= in_payload;
end
end
end
endgenerate
assign read = internal_out_ready && internal_out_valid && ok_to_forward;
assign write = in_ready && in_valid;
// --------------------------------------------------
// Pointer Management
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk11
assign incremented_wr_ptr = wr_ptr + 1'b1;
assign incremented_rd_ptr = rd_ptr + 1'b1;
assign next_wr_ptr = drop_on_error ? curr_sop_ptr : write ? incremented_wr_ptr : wr_ptr;
assign next_rd_ptr = (read) ? incremented_rd_ptr : rd_ptr;
always @(posedge clk or posedge reset) begin
if (reset) begin
wr_ptr <= 0;
rd_ptr <= 0;
end
else begin
wr_ptr <= next_wr_ptr;
rd_ptr <= next_rd_ptr;
end
end
end else begin : gen_blk11_else
// --------------------------------------------------
// Shift Register Occupancy Bits
//
// Consider a 4-deep FIFO with 2 entries: 0011
// On a read and write, do not modify the bits.
// On a write, left-shift the bits to get 0111.
// On a read, right-shift the bits to get 0001.
//
// Also, on a write we set bit0 (the head), while
// clearing the tail on a read.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[0] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[0] <= 1;
else if (read) begin
if (DEPTH > 1)
mem_used[0] <= mem_used[1];
else
mem_used[0] <= 0;
end
end
end
end
if (DEPTH > 1) begin : gen_blk12
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[DEPTH-1] <= 0;
end
else begin
if (write ^ read) begin
mem_used[DEPTH-1] <= 0;
if (write)
mem_used[DEPTH-1] <= mem_used[DEPTH-2];
end
end
end
end
for (i = 1; i < DEPTH-1; i = i + 1) begin : storage_logic
always @(posedge clk, posedge reset) begin
if (reset) begin
mem_used[i] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[i] <= mem_used[i-1];
else if (read)
mem_used[i] <= mem_used[i+1];
end
end
end
end
end
endgenerate
// --------------------------------------------------
// Memory FIFO Status Management
//
// Generates the full and empty signals from the
// pointers. The FIFO is full when the next write
// pointer will be equal to the read pointer after
// a write. Reading from a FIFO clears full.
//
// The FIFO is empty when the next read pointer will
// be equal to the write pointer after a read. Writing
// to a FIFO clears empty.
//
// A simultaneous read and write must not change any of
// the empty or full flags unless there is a drop on error event.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk13
always @* begin
next_full = full;
next_empty = empty;
if (read && !write) begin
next_full = 1'b0;
if (incremented_rd_ptr == wr_ptr)
next_empty = 1'b1;
end
if (write && !read) begin
if (!drop_on_error)
next_empty = 1'b0;
else if (curr_sop_ptr == rd_ptr) // drop on error and only 1 pkt in fifo
next_empty = 1'b1;
if (incremented_wr_ptr == rd_ptr && !drop_on_error)
next_full = 1'b1;
end
if (write && read && drop_on_error) begin
if (curr_sop_ptr == next_rd_ptr)
next_empty = 1'b1;
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
empty <= 1;
full <= 0;
end
else begin
empty <= next_empty;
full <= next_full;
end
end
end else begin : gen_blk13_else
// --------------------------------------------------
// Register FIFO Status Management
//
// Full when the tail occupancy bit is 1. Empty when
// the head occupancy bit is 0.
// --------------------------------------------------
always @* begin
full = mem_used[DEPTH-1];
empty = !mem_used[0];
// ------------------------------------------
// For a single slot FIFO, reading clears the
// full status immediately.
// ------------------------------------------
if (DEPTH == 1)
full = mem_used[0] && !read;
internal_out_payload = mem[0];
// ------------------------------------------
// Writes clear empty immediately for lookahead modes.
// Note that we use in_valid instead of write to avoid
// combinational loops (in lookahead mode, qualifying
// with in_ready is meaningless).
//
// In a 1-deep FIFO, a possible combinational loop runs
// from write -> out_valid -> out_ready -> write
// ------------------------------------------
if (EMPTY_LATENCY == 0) begin
empty = !mem_used[0] && !in_valid;
if (!mem_used[0] && in_valid)
internal_out_payload = in_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Avalon-ST Signals
//
// The in_ready signal is straightforward.
//
// To match memory latency when empty latency > 1,
// out_valid assertions must be delayed by one clock
// cycle.
//
// Note: out_valid deassertions must not be delayed or
// the FIFO will underflow.
// --------------------------------------------------
assign in_ready = !full;
assign internal_out_ready = out_ready || !out_valid;
generate if (EMPTY_LATENCY > 1) begin : gen_blk14
always @(posedge clk or posedge reset) begin
if (reset)
internal_out_valid <= 0;
else begin
internal_out_valid <= !empty & ok_to_forward & ~drop_on_error;
if (read) begin
if (incremented_rd_ptr == wr_ptr)
internal_out_valid <= 1'b0;
end
end
end
end else begin : gen_blk14_else
always @* begin
internal_out_valid = !empty & ok_to_forward;
end
end
endgenerate
// --------------------------------------------------
// Single Output Pipeline Stage
//
// This output pipeline stage is enabled if the FIFO's
// empty latency is set to 3 (default). It is disabled
// for all other allowed latencies.
//
// Reason: The memory outputs are unregistered, so we have to
// register the output or fmax will drop if combinatorial
// logic is present on the output datapath.
//
// Q: The Avalon-ST spec says that I have to register my outputs
// But isn't the memory counted as a register?
// A: The path from the address lookup to the memory output is
// slow. Registering the memory outputs is a good idea.
//
// The registers get packed into the memory by the fitter
// which means minimal resources are consumed (the result
// is a altsyncram with registered outputs, available on
// all modern Altera devices).
//
// This output stage acts as an extra slot in the FIFO,
// and complicates the fill level.
// --------------------------------------------------
generate if (EMPTY_LATENCY == 3) begin : gen_blk15
always @(posedge clk or posedge reset) begin
if (reset) begin
out_valid <= 0;
out_payload <= 0;
end
else begin
if (internal_out_ready) begin
out_valid <= internal_out_valid & ok_to_forward;
out_payload <= internal_out_payload;
end
end
end
end
else begin : gen_blk15_else
always @* begin
out_valid = internal_out_valid;
out_payload = internal_out_payload;
end
end
endgenerate
// --------------------------------------------------
// Fill Level
//
// The fill level is calculated from the next write
// and read pointers to avoid unnecessary latency
// and logic.
//
// However, if the store-and-forward mode of the FIFO
// is enabled, the fill level is an up-down counter
// for fmax optimization reasons.
//
// If the output pipeline is enabled, the fill level
// must account for it, or we'll always be off by one.
// This may, or may not be important depending on the
// application.
//
// For now, we'll always calculate the exact fill level
// at the cost of an extra adder when the output stage
// is enabled.
// --------------------------------------------------
generate if (USE_FILL_LEVEL) begin : gen_blk16
wire [31:0] depth32;
assign depth32 = DEPTH;
if (USE_STORE_FORWARD) begin
reg [ADDR_WIDTH : 0] curr_packet_len_less_one;
// --------------------------------------------------
// We only drop on endofpacket. As long as we don't add to the fill
// level on the dropped endofpacket cycle, we can simply subtract
// (packet length - 1) from the fill level for dropped packets.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
curr_packet_len_less_one <= 0;
end else begin
if (write) begin
curr_packet_len_less_one <= curr_packet_len_less_one + 1'b1;
if (in_endofpacket)
curr_packet_len_less_one <= 0;
end
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
fifo_fill_level <= 0;
end else if (drop_on_error) begin
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one;
if (read)
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one - 1'b1;
end else if (write && !read) begin
fifo_fill_level <= fifo_fill_level + 1'b1;
end else if (read && !write) begin
fifo_fill_level <= fifo_fill_level - 1'b1;
end
end
end else begin
always @(posedge clk or posedge reset) begin
if (reset)
fifo_fill_level <= 0;
else if (next_full & !drop_on_error)
fifo_fill_level <= depth32[ADDR_WIDTH:0];
else begin
fifo_fill_level[ADDR_WIDTH] <= 1'b0;
fifo_fill_level[ADDR_WIDTH-1 : 0] <= next_wr_ptr - next_rd_ptr;
end
end
end
always @* begin
fill_level = fifo_fill_level;
if (EMPTY_LATENCY == 3)
fill_level = fifo_fill_level + {{ADDR_WIDTH{1'b0}}, out_valid};
end
end
else begin : gen_blk16_else
always @* begin
fill_level = 0;
end
end
endgenerate
generate if (USE_ALMOST_FULL_IF) begin : gen_blk17
assign almost_full_data = (fill_level >= almost_full_threshold);
end
else
assign almost_full_data = 0;
endgenerate
generate if (USE_ALMOST_EMPTY_IF) begin : gen_blk18
assign almost_empty_data = (fill_level <= almost_empty_threshold);
end
else
assign almost_empty_data = 0;
endgenerate
// --------------------------------------------------
// Avalon-MM Status & Control Connection Point
//
// Register map:
//
// | Addr | RW | 31 - 0 |
// | 0 | R | Fill level |
//
// The registering of this connection point means
// that there is a cycle of latency between
// reads/writes and the updating of the fill level.
// --------------------------------------------------
generate if (USE_STORE_FORWARD) begin : gen_blk19
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
cut_through_threshold <= 0;
drop_on_error_en <= 0;
csr_readdata <= 0;
pkt_mode <= 1'b1;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 5)
csr_readdata <= {31'b0, drop_on_error_en};
else if (csr_address == 4)
csr_readdata <= {8'b0, cut_through_threshold};
else if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b101)
drop_on_error_en <= csr_writedata[0];
else if(csr_address == 3'b100) begin
cut_through_threshold <= csr_writedata[23:0];
pkt_mode <= (csr_writedata[23:0] == 0);
end
else if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else if (USE_ALMOST_FULL_IF || USE_ALMOST_EMPTY_IF) begin : gen_blk19_else1
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
csr_readdata <= 0;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else begin : gen_blk19_else2
always @(posedge clk or posedge reset) begin
if (reset) begin
csr_readdata <= 0;
end
else if (csr_read) begin
csr_readdata <= 0;
if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
end
end
endgenerate
// --------------------------------------------------
// Store and forward logic
// --------------------------------------------------
// if the fifo gets full before the entire packet or the
// cut-threshold condition is met then start sending out
// data in order to avoid dead-lock situation
generate if (USE_STORE_FORWARD) begin : gen_blk20
assign wait_for_threshold = (fifo_fill_level_lt_cut_through_threshold) & wait_for_pkt ;
assign wait_for_pkt = pkt_cnt_eq_zero | (pkt_cnt_eq_one & out_pkt_leave);
assign ok_to_forward = (pkt_mode ? (~wait_for_pkt | ~pkt_has_started) :
~wait_for_threshold) | fifo_too_small_r;
assign in_pkt_eop_arrive = in_valid & in_ready & in_endofpacket;
assign in_pkt_start = in_valid & in_ready & in_startofpacket;
assign in_pkt_error = in_valid & in_ready & |in_error;
assign out_pkt_sop_leave = out_valid & out_ready & out_startofpacket;
assign out_pkt_leave = out_valid & out_ready & out_endofpacket;
assign fifo_too_small = (pkt_mode ? wait_for_pkt : wait_for_threshold) & full & out_ready;
// count packets coming and going into the fifo
always @(posedge clk or posedge reset) begin
if (reset) begin
pkt_cnt <= 0;
pkt_has_started <= 0;
sop_has_left_fifo <= 0;
fifo_too_small_r <= 0;
pkt_cnt_eq_zero <= 1'b1;
pkt_cnt_eq_one <= 1'b0;
fifo_fill_level_lt_cut_through_threshold <= 1'b1;
end
else begin
fifo_fill_level_lt_cut_through_threshold <= fifo_fill_level < cut_through_threshold;
fifo_too_small_r <= fifo_too_small;
if( in_pkt_eop_arrive )
sop_has_left_fifo <= 1'b0;
else if (out_pkt_sop_leave & pkt_cnt_eq_zero )
sop_has_left_fifo <= 1'b1;
if (in_pkt_eop_arrive & ~out_pkt_leave & ~drop_on_error ) begin
pkt_cnt <= pkt_cnt + 1'b1;
pkt_cnt_eq_zero <= 0;
if (pkt_cnt == 0)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
else if((~in_pkt_eop_arrive | drop_on_error) & out_pkt_leave) begin
pkt_cnt <= pkt_cnt - 1'b1;
if (pkt_cnt == 1)
pkt_cnt_eq_zero <= 1'b1;
else
pkt_cnt_eq_zero <= 1'b0;
if (pkt_cnt == 2)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
if (in_pkt_start)
pkt_has_started <= 1'b1;
else if (in_pkt_eop_arrive)
pkt_has_started <= 1'b0;
end
end
// drop on error logic
always @(posedge clk or posedge reset) begin
if (reset) begin
sop_ptr <= 0;
error_in_pkt <= 0;
end
else begin
// save the location of the SOP
if ( in_pkt_start )
sop_ptr <= wr_ptr;
// remember if error in pkt
// log error only if packet has already started
if (in_pkt_eop_arrive)
error_in_pkt <= 1'b0;
else if ( in_pkt_error & (pkt_has_started | in_pkt_start))
error_in_pkt <= 1'b1;
end
end
assign drop_on_error = drop_on_error_en & (error_in_pkt | in_pkt_error) & in_pkt_eop_arrive &
~sop_has_left_fifo & ~(out_pkt_sop_leave & pkt_cnt_eq_zero);
assign curr_sop_ptr = (write && in_startofpacket && in_endofpacket) ? wr_ptr : sop_ptr;
end
else begin : gen_blk20_else
assign ok_to_forward = 1'b1;
assign drop_on_error = 1'b0;
if (ADDR_WIDTH <= 1)
assign curr_sop_ptr = 1'b0;
else
assign curr_sop_ptr = {ADDR_WIDTH - 1 { 1'b0 }};
end
endgenerate
// --------------------------------------------------
// Calculates the log2ceil of the input value
// --------------------------------------------------
function integer log2ceil;
input integer val;
reg[31:0] i;
begin
i = 1;
log2ceil = 0;
while (i < val) begin
log2ceil = log2ceil + 1;
i = i[30:0] << 1;
end
end
endfunction
endmodule
|
// -----------------------------------------------------------
// Legal Notice: (C)2007 Altera Corporation. All rights reserved. Your
// use of Altera Corporation's design tools, logic functions and other
// software and tools, and its AMPP partner logic functions, and any
// output files any of the foregoing (including device programming or
// simulation files), and any associated documentation or information are
// expressly subject to the terms and conditions of the Altera Program
// License Subscription Agreement or other applicable license agreement,
// including, without limitation, that your use is for the sole purpose
// of programming logic devices manufactured by Altera and sold by Altera
// or its authorized distributors. Please refer to the applicable
// agreement for further details.
//
// Description: Single clock Avalon-ST FIFO.
// -----------------------------------------------------------
`timescale 1 ns / 1 ns
//altera message_off 10036
module altera_avalon_sc_fifo
#(
// --------------------------------------------------
// Parameters
// --------------------------------------------------
parameter SYMBOLS_PER_BEAT = 1,
parameter BITS_PER_SYMBOL = 8,
parameter FIFO_DEPTH = 16,
parameter CHANNEL_WIDTH = 0,
parameter ERROR_WIDTH = 0,
parameter USE_PACKETS = 0,
parameter USE_FILL_LEVEL = 0,
parameter USE_STORE_FORWARD = 0,
parameter USE_ALMOST_FULL_IF = 0,
parameter USE_ALMOST_EMPTY_IF = 0,
// --------------------------------------------------
// Empty latency is defined as the number of cycles
// required for a write to deassert the empty flag.
// For example, a latency of 1 means that the empty
// flag is deasserted on the cycle after a write.
//
// Another way to think of it is the latency for a
// write to propagate to the output.
//
// An empty latency of 0 implies lookahead, which is
// only implemented for the register-based FIFO.
// --------------------------------------------------
parameter EMPTY_LATENCY = 3,
parameter USE_MEMORY_BLOCKS = 1,
// --------------------------------------------------
// Internal Parameters
// --------------------------------------------------
parameter DATA_WIDTH = SYMBOLS_PER_BEAT * BITS_PER_SYMBOL,
parameter EMPTY_WIDTH = log2ceil(SYMBOLS_PER_BEAT)
)
(
// --------------------------------------------------
// Ports
// --------------------------------------------------
input clk,
input reset,
input [DATA_WIDTH-1: 0] in_data,
input in_valid,
input in_startofpacket,
input in_endofpacket,
input [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] in_empty,
input [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] in_error,
input [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] in_channel,
output in_ready,
output [DATA_WIDTH-1 : 0] out_data,
output reg out_valid,
output out_startofpacket,
output out_endofpacket,
output [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] out_empty,
output [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] out_error,
output [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] out_channel,
input out_ready,
input [(USE_STORE_FORWARD ? 2 : 1) : 0] csr_address,
input csr_write,
input csr_read,
input [31 : 0] csr_writedata,
output reg [31 : 0] csr_readdata,
output wire almost_full_data,
output wire almost_empty_data
);
// --------------------------------------------------
// Local Parameters
// --------------------------------------------------
localparam ADDR_WIDTH = log2ceil(FIFO_DEPTH);
localparam DEPTH = FIFO_DEPTH;
localparam PKT_SIGNALS_WIDTH = 2 + EMPTY_WIDTH;
localparam PAYLOAD_WIDTH = (USE_PACKETS == 1) ?
2 + EMPTY_WIDTH + DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH:
DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH;
// --------------------------------------------------
// Internal Signals
// --------------------------------------------------
genvar i;
reg [PAYLOAD_WIDTH-1 : 0] mem [DEPTH-1 : 0];
reg [ADDR_WIDTH-1 : 0] wr_ptr;
reg [ADDR_WIDTH-1 : 0] rd_ptr;
reg [DEPTH-1 : 0] mem_used;
wire [ADDR_WIDTH-1 : 0] next_wr_ptr;
wire [ADDR_WIDTH-1 : 0] next_rd_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_wr_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_rd_ptr;
wire [ADDR_WIDTH-1 : 0] mem_rd_ptr;
wire read;
wire write;
reg empty;
reg next_empty;
reg full;
reg next_full;
wire [PKT_SIGNALS_WIDTH-1 : 0] in_packet_signals;
wire [PKT_SIGNALS_WIDTH-1 : 0] out_packet_signals;
wire [PAYLOAD_WIDTH-1 : 0] in_payload;
reg [PAYLOAD_WIDTH-1 : 0] internal_out_payload;
reg [PAYLOAD_WIDTH-1 : 0] out_payload;
reg internal_out_valid;
wire internal_out_ready;
reg [ADDR_WIDTH : 0] fifo_fill_level;
reg [ADDR_WIDTH : 0] fill_level;
reg [ADDR_WIDTH-1 : 0] sop_ptr = 0;
wire [ADDR_WIDTH-1 : 0] curr_sop_ptr;
reg [23:0] almost_full_threshold;
reg [23:0] almost_empty_threshold;
reg [23:0] cut_through_threshold;
reg [15:0] pkt_cnt;
reg drop_on_error_en;
reg error_in_pkt;
reg pkt_has_started;
reg sop_has_left_fifo;
reg fifo_too_small_r;
reg pkt_cnt_eq_zero;
reg pkt_cnt_eq_one;
wire wait_for_threshold;
reg pkt_mode;
wire wait_for_pkt;
wire ok_to_forward;
wire in_pkt_eop_arrive;
wire out_pkt_leave;
wire in_pkt_start;
wire in_pkt_error;
wire drop_on_error;
wire fifo_too_small;
wire out_pkt_sop_leave;
wire [31:0] max_fifo_size;
reg fifo_fill_level_lt_cut_through_threshold;
// --------------------------------------------------
// Define Payload
//
// Icky part where we decide which signals form the
// payload to the FIFO with generate blocks.
// --------------------------------------------------
generate
if (EMPTY_WIDTH > 0) begin : gen_blk1
assign in_packet_signals = {in_startofpacket, in_endofpacket, in_empty};
assign {out_startofpacket, out_endofpacket, out_empty} = out_packet_signals;
end
else begin : gen_blk1_else
assign out_empty = in_error;
assign in_packet_signals = {in_startofpacket, in_endofpacket};
assign {out_startofpacket, out_endofpacket} = out_packet_signals;
end
endgenerate
generate
if (USE_PACKETS) begin : gen_blk2
if (ERROR_WIDTH > 0) begin : gen_blk3
if (CHANNEL_WIDTH > 0) begin : gen_blk4
assign in_payload = {in_packet_signals, in_data, in_error, in_channel};
assign {out_packet_signals, out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk4_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data, in_error};
assign {out_packet_signals, out_data, out_error} = out_payload;
end
end
else begin : gen_blk3_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk5
assign in_payload = {in_packet_signals, in_data, in_channel};
assign {out_packet_signals, out_data, out_channel} = out_payload;
end
else begin : gen_blk5_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data};
assign {out_packet_signals, out_data} = out_payload;
end
end
end
else begin : gen_blk2_else
assign out_packet_signals = 0;
if (ERROR_WIDTH > 0) begin : gen_blk6
if (CHANNEL_WIDTH > 0) begin : gen_blk7
assign in_payload = {in_data, in_error, in_channel};
assign {out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk7_else
assign out_channel = in_channel;
assign in_payload = {in_data, in_error};
assign {out_data, out_error} = out_payload;
end
end
else begin : gen_blk6_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk8
assign in_payload = {in_data, in_channel};
assign {out_data, out_channel} = out_payload;
end
else begin : gen_blk8_else
assign out_channel = in_channel;
assign in_payload = in_data;
assign out_data = out_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Memory-based FIFO storage
//
// To allow a ready latency of 0, the read index is
// obtained from the next read pointer and memory
// outputs are unregistered.
//
// If the empty latency is 1, we infer bypass logic
// around the memory so writes propagate to the
// outputs on the next cycle.
//
// Do not change the way this is coded: Quartus needs
// a perfect match to the template, and any attempt to
// refactor the two always blocks into one will break
// memory inference.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk9
if (EMPTY_LATENCY == 1) begin : gen_blk10
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] = in_payload;
internal_out_payload = mem[mem_rd_ptr];
end
end else begin : gen_blk10_else
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] <= in_payload;
internal_out_payload <= mem[mem_rd_ptr];
end
end
assign mem_rd_ptr = next_rd_ptr;
end else begin : gen_blk9_else
// --------------------------------------------------
// Register-based FIFO storage
//
// Uses a shift register as the storage element. Each
// shift register slot has a bit which indicates if
// the slot is occupied (credit to Sam H for the idea).
// The occupancy bits are contiguous and start from the
// lsb, so 0000, 0001, 0011, 0111, 1111 for a 4-deep
// FIFO.
//
// Each slot is enabled during a read or when it
// is unoccupied. New data is always written to every
// going-to-be-empty slot (we keep track of which ones
// are actually useful with the occupancy bits). On a
// read we shift occupied slots.
//
// The exception is the last slot, which always gets
// new data when it is unoccupied.
// --------------------------------------------------
for (i = 0; i < DEPTH-1; i = i + 1) begin : shift_reg
always @(posedge clk or posedge reset) begin
if (reset) begin
mem[i] <= 0;
end
else if (read || !mem_used[i]) begin
if (!mem_used[i+1])
mem[i] <= in_payload;
else
mem[i] <= mem[i+1];
end
end
end
always @(posedge clk, posedge reset) begin
if (reset) begin
mem[DEPTH-1] <= 0;
end
else begin
if (DEPTH == 1) begin
if (write)
mem[DEPTH-1] <= in_payload;
end
else if (!mem_used[DEPTH-1])
mem[DEPTH-1] <= in_payload;
end
end
end
endgenerate
assign read = internal_out_ready && internal_out_valid && ok_to_forward;
assign write = in_ready && in_valid;
// --------------------------------------------------
// Pointer Management
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk11
assign incremented_wr_ptr = wr_ptr + 1'b1;
assign incremented_rd_ptr = rd_ptr + 1'b1;
assign next_wr_ptr = drop_on_error ? curr_sop_ptr : write ? incremented_wr_ptr : wr_ptr;
assign next_rd_ptr = (read) ? incremented_rd_ptr : rd_ptr;
always @(posedge clk or posedge reset) begin
if (reset) begin
wr_ptr <= 0;
rd_ptr <= 0;
end
else begin
wr_ptr <= next_wr_ptr;
rd_ptr <= next_rd_ptr;
end
end
end else begin : gen_blk11_else
// --------------------------------------------------
// Shift Register Occupancy Bits
//
// Consider a 4-deep FIFO with 2 entries: 0011
// On a read and write, do not modify the bits.
// On a write, left-shift the bits to get 0111.
// On a read, right-shift the bits to get 0001.
//
// Also, on a write we set bit0 (the head), while
// clearing the tail on a read.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[0] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[0] <= 1;
else if (read) begin
if (DEPTH > 1)
mem_used[0] <= mem_used[1];
else
mem_used[0] <= 0;
end
end
end
end
if (DEPTH > 1) begin : gen_blk12
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[DEPTH-1] <= 0;
end
else begin
if (write ^ read) begin
mem_used[DEPTH-1] <= 0;
if (write)
mem_used[DEPTH-1] <= mem_used[DEPTH-2];
end
end
end
end
for (i = 1; i < DEPTH-1; i = i + 1) begin : storage_logic
always @(posedge clk, posedge reset) begin
if (reset) begin
mem_used[i] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[i] <= mem_used[i-1];
else if (read)
mem_used[i] <= mem_used[i+1];
end
end
end
end
end
endgenerate
// --------------------------------------------------
// Memory FIFO Status Management
//
// Generates the full and empty signals from the
// pointers. The FIFO is full when the next write
// pointer will be equal to the read pointer after
// a write. Reading from a FIFO clears full.
//
// The FIFO is empty when the next read pointer will
// be equal to the write pointer after a read. Writing
// to a FIFO clears empty.
//
// A simultaneous read and write must not change any of
// the empty or full flags unless there is a drop on error event.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk13
always @* begin
next_full = full;
next_empty = empty;
if (read && !write) begin
next_full = 1'b0;
if (incremented_rd_ptr == wr_ptr)
next_empty = 1'b1;
end
if (write && !read) begin
if (!drop_on_error)
next_empty = 1'b0;
else if (curr_sop_ptr == rd_ptr) // drop on error and only 1 pkt in fifo
next_empty = 1'b1;
if (incremented_wr_ptr == rd_ptr && !drop_on_error)
next_full = 1'b1;
end
if (write && read && drop_on_error) begin
if (curr_sop_ptr == next_rd_ptr)
next_empty = 1'b1;
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
empty <= 1;
full <= 0;
end
else begin
empty <= next_empty;
full <= next_full;
end
end
end else begin : gen_blk13_else
// --------------------------------------------------
// Register FIFO Status Management
//
// Full when the tail occupancy bit is 1. Empty when
// the head occupancy bit is 0.
// --------------------------------------------------
always @* begin
full = mem_used[DEPTH-1];
empty = !mem_used[0];
// ------------------------------------------
// For a single slot FIFO, reading clears the
// full status immediately.
// ------------------------------------------
if (DEPTH == 1)
full = mem_used[0] && !read;
internal_out_payload = mem[0];
// ------------------------------------------
// Writes clear empty immediately for lookahead modes.
// Note that we use in_valid instead of write to avoid
// combinational loops (in lookahead mode, qualifying
// with in_ready is meaningless).
//
// In a 1-deep FIFO, a possible combinational loop runs
// from write -> out_valid -> out_ready -> write
// ------------------------------------------
if (EMPTY_LATENCY == 0) begin
empty = !mem_used[0] && !in_valid;
if (!mem_used[0] && in_valid)
internal_out_payload = in_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Avalon-ST Signals
//
// The in_ready signal is straightforward.
//
// To match memory latency when empty latency > 1,
// out_valid assertions must be delayed by one clock
// cycle.
//
// Note: out_valid deassertions must not be delayed or
// the FIFO will underflow.
// --------------------------------------------------
assign in_ready = !full;
assign internal_out_ready = out_ready || !out_valid;
generate if (EMPTY_LATENCY > 1) begin : gen_blk14
always @(posedge clk or posedge reset) begin
if (reset)
internal_out_valid <= 0;
else begin
internal_out_valid <= !empty & ok_to_forward & ~drop_on_error;
if (read) begin
if (incremented_rd_ptr == wr_ptr)
internal_out_valid <= 1'b0;
end
end
end
end else begin : gen_blk14_else
always @* begin
internal_out_valid = !empty & ok_to_forward;
end
end
endgenerate
// --------------------------------------------------
// Single Output Pipeline Stage
//
// This output pipeline stage is enabled if the FIFO's
// empty latency is set to 3 (default). It is disabled
// for all other allowed latencies.
//
// Reason: The memory outputs are unregistered, so we have to
// register the output or fmax will drop if combinatorial
// logic is present on the output datapath.
//
// Q: The Avalon-ST spec says that I have to register my outputs
// But isn't the memory counted as a register?
// A: The path from the address lookup to the memory output is
// slow. Registering the memory outputs is a good idea.
//
// The registers get packed into the memory by the fitter
// which means minimal resources are consumed (the result
// is a altsyncram with registered outputs, available on
// all modern Altera devices).
//
// This output stage acts as an extra slot in the FIFO,
// and complicates the fill level.
// --------------------------------------------------
generate if (EMPTY_LATENCY == 3) begin : gen_blk15
always @(posedge clk or posedge reset) begin
if (reset) begin
out_valid <= 0;
out_payload <= 0;
end
else begin
if (internal_out_ready) begin
out_valid <= internal_out_valid & ok_to_forward;
out_payload <= internal_out_payload;
end
end
end
end
else begin : gen_blk15_else
always @* begin
out_valid = internal_out_valid;
out_payload = internal_out_payload;
end
end
endgenerate
// --------------------------------------------------
// Fill Level
//
// The fill level is calculated from the next write
// and read pointers to avoid unnecessary latency
// and logic.
//
// However, if the store-and-forward mode of the FIFO
// is enabled, the fill level is an up-down counter
// for fmax optimization reasons.
//
// If the output pipeline is enabled, the fill level
// must account for it, or we'll always be off by one.
// This may, or may not be important depending on the
// application.
//
// For now, we'll always calculate the exact fill level
// at the cost of an extra adder when the output stage
// is enabled.
// --------------------------------------------------
generate if (USE_FILL_LEVEL) begin : gen_blk16
wire [31:0] depth32;
assign depth32 = DEPTH;
if (USE_STORE_FORWARD) begin
reg [ADDR_WIDTH : 0] curr_packet_len_less_one;
// --------------------------------------------------
// We only drop on endofpacket. As long as we don't add to the fill
// level on the dropped endofpacket cycle, we can simply subtract
// (packet length - 1) from the fill level for dropped packets.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
curr_packet_len_less_one <= 0;
end else begin
if (write) begin
curr_packet_len_less_one <= curr_packet_len_less_one + 1'b1;
if (in_endofpacket)
curr_packet_len_less_one <= 0;
end
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
fifo_fill_level <= 0;
end else if (drop_on_error) begin
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one;
if (read)
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one - 1'b1;
end else if (write && !read) begin
fifo_fill_level <= fifo_fill_level + 1'b1;
end else if (read && !write) begin
fifo_fill_level <= fifo_fill_level - 1'b1;
end
end
end else begin
always @(posedge clk or posedge reset) begin
if (reset)
fifo_fill_level <= 0;
else if (next_full & !drop_on_error)
fifo_fill_level <= depth32[ADDR_WIDTH:0];
else begin
fifo_fill_level[ADDR_WIDTH] <= 1'b0;
fifo_fill_level[ADDR_WIDTH-1 : 0] <= next_wr_ptr - next_rd_ptr;
end
end
end
always @* begin
fill_level = fifo_fill_level;
if (EMPTY_LATENCY == 3)
fill_level = fifo_fill_level + {{ADDR_WIDTH{1'b0}}, out_valid};
end
end
else begin : gen_blk16_else
always @* begin
fill_level = 0;
end
end
endgenerate
generate if (USE_ALMOST_FULL_IF) begin : gen_blk17
assign almost_full_data = (fill_level >= almost_full_threshold);
end
else
assign almost_full_data = 0;
endgenerate
generate if (USE_ALMOST_EMPTY_IF) begin : gen_blk18
assign almost_empty_data = (fill_level <= almost_empty_threshold);
end
else
assign almost_empty_data = 0;
endgenerate
// --------------------------------------------------
// Avalon-MM Status & Control Connection Point
//
// Register map:
//
// | Addr | RW | 31 - 0 |
// | 0 | R | Fill level |
//
// The registering of this connection point means
// that there is a cycle of latency between
// reads/writes and the updating of the fill level.
// --------------------------------------------------
generate if (USE_STORE_FORWARD) begin : gen_blk19
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
cut_through_threshold <= 0;
drop_on_error_en <= 0;
csr_readdata <= 0;
pkt_mode <= 1'b1;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 5)
csr_readdata <= {31'b0, drop_on_error_en};
else if (csr_address == 4)
csr_readdata <= {8'b0, cut_through_threshold};
else if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b101)
drop_on_error_en <= csr_writedata[0];
else if(csr_address == 3'b100) begin
cut_through_threshold <= csr_writedata[23:0];
pkt_mode <= (csr_writedata[23:0] == 0);
end
else if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else if (USE_ALMOST_FULL_IF || USE_ALMOST_EMPTY_IF) begin : gen_blk19_else1
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
csr_readdata <= 0;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else begin : gen_blk19_else2
always @(posedge clk or posedge reset) begin
if (reset) begin
csr_readdata <= 0;
end
else if (csr_read) begin
csr_readdata <= 0;
if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
end
end
endgenerate
// --------------------------------------------------
// Store and forward logic
// --------------------------------------------------
// if the fifo gets full before the entire packet or the
// cut-threshold condition is met then start sending out
// data in order to avoid dead-lock situation
generate if (USE_STORE_FORWARD) begin : gen_blk20
assign wait_for_threshold = (fifo_fill_level_lt_cut_through_threshold) & wait_for_pkt ;
assign wait_for_pkt = pkt_cnt_eq_zero | (pkt_cnt_eq_one & out_pkt_leave);
assign ok_to_forward = (pkt_mode ? (~wait_for_pkt | ~pkt_has_started) :
~wait_for_threshold) | fifo_too_small_r;
assign in_pkt_eop_arrive = in_valid & in_ready & in_endofpacket;
assign in_pkt_start = in_valid & in_ready & in_startofpacket;
assign in_pkt_error = in_valid & in_ready & |in_error;
assign out_pkt_sop_leave = out_valid & out_ready & out_startofpacket;
assign out_pkt_leave = out_valid & out_ready & out_endofpacket;
assign fifo_too_small = (pkt_mode ? wait_for_pkt : wait_for_threshold) & full & out_ready;
// count packets coming and going into the fifo
always @(posedge clk or posedge reset) begin
if (reset) begin
pkt_cnt <= 0;
pkt_has_started <= 0;
sop_has_left_fifo <= 0;
fifo_too_small_r <= 0;
pkt_cnt_eq_zero <= 1'b1;
pkt_cnt_eq_one <= 1'b0;
fifo_fill_level_lt_cut_through_threshold <= 1'b1;
end
else begin
fifo_fill_level_lt_cut_through_threshold <= fifo_fill_level < cut_through_threshold;
fifo_too_small_r <= fifo_too_small;
if( in_pkt_eop_arrive )
sop_has_left_fifo <= 1'b0;
else if (out_pkt_sop_leave & pkt_cnt_eq_zero )
sop_has_left_fifo <= 1'b1;
if (in_pkt_eop_arrive & ~out_pkt_leave & ~drop_on_error ) begin
pkt_cnt <= pkt_cnt + 1'b1;
pkt_cnt_eq_zero <= 0;
if (pkt_cnt == 0)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
else if((~in_pkt_eop_arrive | drop_on_error) & out_pkt_leave) begin
pkt_cnt <= pkt_cnt - 1'b1;
if (pkt_cnt == 1)
pkt_cnt_eq_zero <= 1'b1;
else
pkt_cnt_eq_zero <= 1'b0;
if (pkt_cnt == 2)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
if (in_pkt_start)
pkt_has_started <= 1'b1;
else if (in_pkt_eop_arrive)
pkt_has_started <= 1'b0;
end
end
// drop on error logic
always @(posedge clk or posedge reset) begin
if (reset) begin
sop_ptr <= 0;
error_in_pkt <= 0;
end
else begin
// save the location of the SOP
if ( in_pkt_start )
sop_ptr <= wr_ptr;
// remember if error in pkt
// log error only if packet has already started
if (in_pkt_eop_arrive)
error_in_pkt <= 1'b0;
else if ( in_pkt_error & (pkt_has_started | in_pkt_start))
error_in_pkt <= 1'b1;
end
end
assign drop_on_error = drop_on_error_en & (error_in_pkt | in_pkt_error) & in_pkt_eop_arrive &
~sop_has_left_fifo & ~(out_pkt_sop_leave & pkt_cnt_eq_zero);
assign curr_sop_ptr = (write && in_startofpacket && in_endofpacket) ? wr_ptr : sop_ptr;
end
else begin : gen_blk20_else
assign ok_to_forward = 1'b1;
assign drop_on_error = 1'b0;
if (ADDR_WIDTH <= 1)
assign curr_sop_ptr = 1'b0;
else
assign curr_sop_ptr = {ADDR_WIDTH - 1 { 1'b0 }};
end
endgenerate
// --------------------------------------------------
// Calculates the log2ceil of the input value
// --------------------------------------------------
function integer log2ceil;
input integer val;
reg[31:0] i;
begin
i = 1;
log2ceil = 0;
while (i < val) begin
log2ceil = log2ceil + 1;
i = i[30:0] << 1;
end
end
endfunction
endmodule
|
// -----------------------------------------------------------
// Legal Notice: (C)2007 Altera Corporation. All rights reserved. Your
// use of Altera Corporation's design tools, logic functions and other
// software and tools, and its AMPP partner logic functions, and any
// output files any of the foregoing (including device programming or
// simulation files), and any associated documentation or information are
// expressly subject to the terms and conditions of the Altera Program
// License Subscription Agreement or other applicable license agreement,
// including, without limitation, that your use is for the sole purpose
// of programming logic devices manufactured by Altera and sold by Altera
// or its authorized distributors. Please refer to the applicable
// agreement for further details.
//
// Description: Single clock Avalon-ST FIFO.
// -----------------------------------------------------------
`timescale 1 ns / 1 ns
//altera message_off 10036
module altera_avalon_sc_fifo
#(
// --------------------------------------------------
// Parameters
// --------------------------------------------------
parameter SYMBOLS_PER_BEAT = 1,
parameter BITS_PER_SYMBOL = 8,
parameter FIFO_DEPTH = 16,
parameter CHANNEL_WIDTH = 0,
parameter ERROR_WIDTH = 0,
parameter USE_PACKETS = 0,
parameter USE_FILL_LEVEL = 0,
parameter USE_STORE_FORWARD = 0,
parameter USE_ALMOST_FULL_IF = 0,
parameter USE_ALMOST_EMPTY_IF = 0,
// --------------------------------------------------
// Empty latency is defined as the number of cycles
// required for a write to deassert the empty flag.
// For example, a latency of 1 means that the empty
// flag is deasserted on the cycle after a write.
//
// Another way to think of it is the latency for a
// write to propagate to the output.
//
// An empty latency of 0 implies lookahead, which is
// only implemented for the register-based FIFO.
// --------------------------------------------------
parameter EMPTY_LATENCY = 3,
parameter USE_MEMORY_BLOCKS = 1,
// --------------------------------------------------
// Internal Parameters
// --------------------------------------------------
parameter DATA_WIDTH = SYMBOLS_PER_BEAT * BITS_PER_SYMBOL,
parameter EMPTY_WIDTH = log2ceil(SYMBOLS_PER_BEAT)
)
(
// --------------------------------------------------
// Ports
// --------------------------------------------------
input clk,
input reset,
input [DATA_WIDTH-1: 0] in_data,
input in_valid,
input in_startofpacket,
input in_endofpacket,
input [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] in_empty,
input [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] in_error,
input [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] in_channel,
output in_ready,
output [DATA_WIDTH-1 : 0] out_data,
output reg out_valid,
output out_startofpacket,
output out_endofpacket,
output [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] out_empty,
output [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] out_error,
output [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] out_channel,
input out_ready,
input [(USE_STORE_FORWARD ? 2 : 1) : 0] csr_address,
input csr_write,
input csr_read,
input [31 : 0] csr_writedata,
output reg [31 : 0] csr_readdata,
output wire almost_full_data,
output wire almost_empty_data
);
// --------------------------------------------------
// Local Parameters
// --------------------------------------------------
localparam ADDR_WIDTH = log2ceil(FIFO_DEPTH);
localparam DEPTH = FIFO_DEPTH;
localparam PKT_SIGNALS_WIDTH = 2 + EMPTY_WIDTH;
localparam PAYLOAD_WIDTH = (USE_PACKETS == 1) ?
2 + EMPTY_WIDTH + DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH:
DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH;
// --------------------------------------------------
// Internal Signals
// --------------------------------------------------
genvar i;
reg [PAYLOAD_WIDTH-1 : 0] mem [DEPTH-1 : 0];
reg [ADDR_WIDTH-1 : 0] wr_ptr;
reg [ADDR_WIDTH-1 : 0] rd_ptr;
reg [DEPTH-1 : 0] mem_used;
wire [ADDR_WIDTH-1 : 0] next_wr_ptr;
wire [ADDR_WIDTH-1 : 0] next_rd_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_wr_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_rd_ptr;
wire [ADDR_WIDTH-1 : 0] mem_rd_ptr;
wire read;
wire write;
reg empty;
reg next_empty;
reg full;
reg next_full;
wire [PKT_SIGNALS_WIDTH-1 : 0] in_packet_signals;
wire [PKT_SIGNALS_WIDTH-1 : 0] out_packet_signals;
wire [PAYLOAD_WIDTH-1 : 0] in_payload;
reg [PAYLOAD_WIDTH-1 : 0] internal_out_payload;
reg [PAYLOAD_WIDTH-1 : 0] out_payload;
reg internal_out_valid;
wire internal_out_ready;
reg [ADDR_WIDTH : 0] fifo_fill_level;
reg [ADDR_WIDTH : 0] fill_level;
reg [ADDR_WIDTH-1 : 0] sop_ptr = 0;
wire [ADDR_WIDTH-1 : 0] curr_sop_ptr;
reg [23:0] almost_full_threshold;
reg [23:0] almost_empty_threshold;
reg [23:0] cut_through_threshold;
reg [15:0] pkt_cnt;
reg drop_on_error_en;
reg error_in_pkt;
reg pkt_has_started;
reg sop_has_left_fifo;
reg fifo_too_small_r;
reg pkt_cnt_eq_zero;
reg pkt_cnt_eq_one;
wire wait_for_threshold;
reg pkt_mode;
wire wait_for_pkt;
wire ok_to_forward;
wire in_pkt_eop_arrive;
wire out_pkt_leave;
wire in_pkt_start;
wire in_pkt_error;
wire drop_on_error;
wire fifo_too_small;
wire out_pkt_sop_leave;
wire [31:0] max_fifo_size;
reg fifo_fill_level_lt_cut_through_threshold;
// --------------------------------------------------
// Define Payload
//
// Icky part where we decide which signals form the
// payload to the FIFO with generate blocks.
// --------------------------------------------------
generate
if (EMPTY_WIDTH > 0) begin : gen_blk1
assign in_packet_signals = {in_startofpacket, in_endofpacket, in_empty};
assign {out_startofpacket, out_endofpacket, out_empty} = out_packet_signals;
end
else begin : gen_blk1_else
assign out_empty = in_error;
assign in_packet_signals = {in_startofpacket, in_endofpacket};
assign {out_startofpacket, out_endofpacket} = out_packet_signals;
end
endgenerate
generate
if (USE_PACKETS) begin : gen_blk2
if (ERROR_WIDTH > 0) begin : gen_blk3
if (CHANNEL_WIDTH > 0) begin : gen_blk4
assign in_payload = {in_packet_signals, in_data, in_error, in_channel};
assign {out_packet_signals, out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk4_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data, in_error};
assign {out_packet_signals, out_data, out_error} = out_payload;
end
end
else begin : gen_blk3_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk5
assign in_payload = {in_packet_signals, in_data, in_channel};
assign {out_packet_signals, out_data, out_channel} = out_payload;
end
else begin : gen_blk5_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data};
assign {out_packet_signals, out_data} = out_payload;
end
end
end
else begin : gen_blk2_else
assign out_packet_signals = 0;
if (ERROR_WIDTH > 0) begin : gen_blk6
if (CHANNEL_WIDTH > 0) begin : gen_blk7
assign in_payload = {in_data, in_error, in_channel};
assign {out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk7_else
assign out_channel = in_channel;
assign in_payload = {in_data, in_error};
assign {out_data, out_error} = out_payload;
end
end
else begin : gen_blk6_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk8
assign in_payload = {in_data, in_channel};
assign {out_data, out_channel} = out_payload;
end
else begin : gen_blk8_else
assign out_channel = in_channel;
assign in_payload = in_data;
assign out_data = out_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Memory-based FIFO storage
//
// To allow a ready latency of 0, the read index is
// obtained from the next read pointer and memory
// outputs are unregistered.
//
// If the empty latency is 1, we infer bypass logic
// around the memory so writes propagate to the
// outputs on the next cycle.
//
// Do not change the way this is coded: Quartus needs
// a perfect match to the template, and any attempt to
// refactor the two always blocks into one will break
// memory inference.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk9
if (EMPTY_LATENCY == 1) begin : gen_blk10
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] = in_payload;
internal_out_payload = mem[mem_rd_ptr];
end
end else begin : gen_blk10_else
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] <= in_payload;
internal_out_payload <= mem[mem_rd_ptr];
end
end
assign mem_rd_ptr = next_rd_ptr;
end else begin : gen_blk9_else
// --------------------------------------------------
// Register-based FIFO storage
//
// Uses a shift register as the storage element. Each
// shift register slot has a bit which indicates if
// the slot is occupied (credit to Sam H for the idea).
// The occupancy bits are contiguous and start from the
// lsb, so 0000, 0001, 0011, 0111, 1111 for a 4-deep
// FIFO.
//
// Each slot is enabled during a read or when it
// is unoccupied. New data is always written to every
// going-to-be-empty slot (we keep track of which ones
// are actually useful with the occupancy bits). On a
// read we shift occupied slots.
//
// The exception is the last slot, which always gets
// new data when it is unoccupied.
// --------------------------------------------------
for (i = 0; i < DEPTH-1; i = i + 1) begin : shift_reg
always @(posedge clk or posedge reset) begin
if (reset) begin
mem[i] <= 0;
end
else if (read || !mem_used[i]) begin
if (!mem_used[i+1])
mem[i] <= in_payload;
else
mem[i] <= mem[i+1];
end
end
end
always @(posedge clk, posedge reset) begin
if (reset) begin
mem[DEPTH-1] <= 0;
end
else begin
if (DEPTH == 1) begin
if (write)
mem[DEPTH-1] <= in_payload;
end
else if (!mem_used[DEPTH-1])
mem[DEPTH-1] <= in_payload;
end
end
end
endgenerate
assign read = internal_out_ready && internal_out_valid && ok_to_forward;
assign write = in_ready && in_valid;
// --------------------------------------------------
// Pointer Management
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk11
assign incremented_wr_ptr = wr_ptr + 1'b1;
assign incremented_rd_ptr = rd_ptr + 1'b1;
assign next_wr_ptr = drop_on_error ? curr_sop_ptr : write ? incremented_wr_ptr : wr_ptr;
assign next_rd_ptr = (read) ? incremented_rd_ptr : rd_ptr;
always @(posedge clk or posedge reset) begin
if (reset) begin
wr_ptr <= 0;
rd_ptr <= 0;
end
else begin
wr_ptr <= next_wr_ptr;
rd_ptr <= next_rd_ptr;
end
end
end else begin : gen_blk11_else
// --------------------------------------------------
// Shift Register Occupancy Bits
//
// Consider a 4-deep FIFO with 2 entries: 0011
// On a read and write, do not modify the bits.
// On a write, left-shift the bits to get 0111.
// On a read, right-shift the bits to get 0001.
//
// Also, on a write we set bit0 (the head), while
// clearing the tail on a read.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[0] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[0] <= 1;
else if (read) begin
if (DEPTH > 1)
mem_used[0] <= mem_used[1];
else
mem_used[0] <= 0;
end
end
end
end
if (DEPTH > 1) begin : gen_blk12
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[DEPTH-1] <= 0;
end
else begin
if (write ^ read) begin
mem_used[DEPTH-1] <= 0;
if (write)
mem_used[DEPTH-1] <= mem_used[DEPTH-2];
end
end
end
end
for (i = 1; i < DEPTH-1; i = i + 1) begin : storage_logic
always @(posedge clk, posedge reset) begin
if (reset) begin
mem_used[i] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[i] <= mem_used[i-1];
else if (read)
mem_used[i] <= mem_used[i+1];
end
end
end
end
end
endgenerate
// --------------------------------------------------
// Memory FIFO Status Management
//
// Generates the full and empty signals from the
// pointers. The FIFO is full when the next write
// pointer will be equal to the read pointer after
// a write. Reading from a FIFO clears full.
//
// The FIFO is empty when the next read pointer will
// be equal to the write pointer after a read. Writing
// to a FIFO clears empty.
//
// A simultaneous read and write must not change any of
// the empty or full flags unless there is a drop on error event.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk13
always @* begin
next_full = full;
next_empty = empty;
if (read && !write) begin
next_full = 1'b0;
if (incremented_rd_ptr == wr_ptr)
next_empty = 1'b1;
end
if (write && !read) begin
if (!drop_on_error)
next_empty = 1'b0;
else if (curr_sop_ptr == rd_ptr) // drop on error and only 1 pkt in fifo
next_empty = 1'b1;
if (incremented_wr_ptr == rd_ptr && !drop_on_error)
next_full = 1'b1;
end
if (write && read && drop_on_error) begin
if (curr_sop_ptr == next_rd_ptr)
next_empty = 1'b1;
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
empty <= 1;
full <= 0;
end
else begin
empty <= next_empty;
full <= next_full;
end
end
end else begin : gen_blk13_else
// --------------------------------------------------
// Register FIFO Status Management
//
// Full when the tail occupancy bit is 1. Empty when
// the head occupancy bit is 0.
// --------------------------------------------------
always @* begin
full = mem_used[DEPTH-1];
empty = !mem_used[0];
// ------------------------------------------
// For a single slot FIFO, reading clears the
// full status immediately.
// ------------------------------------------
if (DEPTH == 1)
full = mem_used[0] && !read;
internal_out_payload = mem[0];
// ------------------------------------------
// Writes clear empty immediately for lookahead modes.
// Note that we use in_valid instead of write to avoid
// combinational loops (in lookahead mode, qualifying
// with in_ready is meaningless).
//
// In a 1-deep FIFO, a possible combinational loop runs
// from write -> out_valid -> out_ready -> write
// ------------------------------------------
if (EMPTY_LATENCY == 0) begin
empty = !mem_used[0] && !in_valid;
if (!mem_used[0] && in_valid)
internal_out_payload = in_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Avalon-ST Signals
//
// The in_ready signal is straightforward.
//
// To match memory latency when empty latency > 1,
// out_valid assertions must be delayed by one clock
// cycle.
//
// Note: out_valid deassertions must not be delayed or
// the FIFO will underflow.
// --------------------------------------------------
assign in_ready = !full;
assign internal_out_ready = out_ready || !out_valid;
generate if (EMPTY_LATENCY > 1) begin : gen_blk14
always @(posedge clk or posedge reset) begin
if (reset)
internal_out_valid <= 0;
else begin
internal_out_valid <= !empty & ok_to_forward & ~drop_on_error;
if (read) begin
if (incremented_rd_ptr == wr_ptr)
internal_out_valid <= 1'b0;
end
end
end
end else begin : gen_blk14_else
always @* begin
internal_out_valid = !empty & ok_to_forward;
end
end
endgenerate
// --------------------------------------------------
// Single Output Pipeline Stage
//
// This output pipeline stage is enabled if the FIFO's
// empty latency is set to 3 (default). It is disabled
// for all other allowed latencies.
//
// Reason: The memory outputs are unregistered, so we have to
// register the output or fmax will drop if combinatorial
// logic is present on the output datapath.
//
// Q: The Avalon-ST spec says that I have to register my outputs
// But isn't the memory counted as a register?
// A: The path from the address lookup to the memory output is
// slow. Registering the memory outputs is a good idea.
//
// The registers get packed into the memory by the fitter
// which means minimal resources are consumed (the result
// is a altsyncram with registered outputs, available on
// all modern Altera devices).
//
// This output stage acts as an extra slot in the FIFO,
// and complicates the fill level.
// --------------------------------------------------
generate if (EMPTY_LATENCY == 3) begin : gen_blk15
always @(posedge clk or posedge reset) begin
if (reset) begin
out_valid <= 0;
out_payload <= 0;
end
else begin
if (internal_out_ready) begin
out_valid <= internal_out_valid & ok_to_forward;
out_payload <= internal_out_payload;
end
end
end
end
else begin : gen_blk15_else
always @* begin
out_valid = internal_out_valid;
out_payload = internal_out_payload;
end
end
endgenerate
// --------------------------------------------------
// Fill Level
//
// The fill level is calculated from the next write
// and read pointers to avoid unnecessary latency
// and logic.
//
// However, if the store-and-forward mode of the FIFO
// is enabled, the fill level is an up-down counter
// for fmax optimization reasons.
//
// If the output pipeline is enabled, the fill level
// must account for it, or we'll always be off by one.
// This may, or may not be important depending on the
// application.
//
// For now, we'll always calculate the exact fill level
// at the cost of an extra adder when the output stage
// is enabled.
// --------------------------------------------------
generate if (USE_FILL_LEVEL) begin : gen_blk16
wire [31:0] depth32;
assign depth32 = DEPTH;
if (USE_STORE_FORWARD) begin
reg [ADDR_WIDTH : 0] curr_packet_len_less_one;
// --------------------------------------------------
// We only drop on endofpacket. As long as we don't add to the fill
// level on the dropped endofpacket cycle, we can simply subtract
// (packet length - 1) from the fill level for dropped packets.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
curr_packet_len_less_one <= 0;
end else begin
if (write) begin
curr_packet_len_less_one <= curr_packet_len_less_one + 1'b1;
if (in_endofpacket)
curr_packet_len_less_one <= 0;
end
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
fifo_fill_level <= 0;
end else if (drop_on_error) begin
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one;
if (read)
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one - 1'b1;
end else if (write && !read) begin
fifo_fill_level <= fifo_fill_level + 1'b1;
end else if (read && !write) begin
fifo_fill_level <= fifo_fill_level - 1'b1;
end
end
end else begin
always @(posedge clk or posedge reset) begin
if (reset)
fifo_fill_level <= 0;
else if (next_full & !drop_on_error)
fifo_fill_level <= depth32[ADDR_WIDTH:0];
else begin
fifo_fill_level[ADDR_WIDTH] <= 1'b0;
fifo_fill_level[ADDR_WIDTH-1 : 0] <= next_wr_ptr - next_rd_ptr;
end
end
end
always @* begin
fill_level = fifo_fill_level;
if (EMPTY_LATENCY == 3)
fill_level = fifo_fill_level + {{ADDR_WIDTH{1'b0}}, out_valid};
end
end
else begin : gen_blk16_else
always @* begin
fill_level = 0;
end
end
endgenerate
generate if (USE_ALMOST_FULL_IF) begin : gen_blk17
assign almost_full_data = (fill_level >= almost_full_threshold);
end
else
assign almost_full_data = 0;
endgenerate
generate if (USE_ALMOST_EMPTY_IF) begin : gen_blk18
assign almost_empty_data = (fill_level <= almost_empty_threshold);
end
else
assign almost_empty_data = 0;
endgenerate
// --------------------------------------------------
// Avalon-MM Status & Control Connection Point
//
// Register map:
//
// | Addr | RW | 31 - 0 |
// | 0 | R | Fill level |
//
// The registering of this connection point means
// that there is a cycle of latency between
// reads/writes and the updating of the fill level.
// --------------------------------------------------
generate if (USE_STORE_FORWARD) begin : gen_blk19
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
cut_through_threshold <= 0;
drop_on_error_en <= 0;
csr_readdata <= 0;
pkt_mode <= 1'b1;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 5)
csr_readdata <= {31'b0, drop_on_error_en};
else if (csr_address == 4)
csr_readdata <= {8'b0, cut_through_threshold};
else if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b101)
drop_on_error_en <= csr_writedata[0];
else if(csr_address == 3'b100) begin
cut_through_threshold <= csr_writedata[23:0];
pkt_mode <= (csr_writedata[23:0] == 0);
end
else if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else if (USE_ALMOST_FULL_IF || USE_ALMOST_EMPTY_IF) begin : gen_blk19_else1
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
csr_readdata <= 0;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else begin : gen_blk19_else2
always @(posedge clk or posedge reset) begin
if (reset) begin
csr_readdata <= 0;
end
else if (csr_read) begin
csr_readdata <= 0;
if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
end
end
endgenerate
// --------------------------------------------------
// Store and forward logic
// --------------------------------------------------
// if the fifo gets full before the entire packet or the
// cut-threshold condition is met then start sending out
// data in order to avoid dead-lock situation
generate if (USE_STORE_FORWARD) begin : gen_blk20
assign wait_for_threshold = (fifo_fill_level_lt_cut_through_threshold) & wait_for_pkt ;
assign wait_for_pkt = pkt_cnt_eq_zero | (pkt_cnt_eq_one & out_pkt_leave);
assign ok_to_forward = (pkt_mode ? (~wait_for_pkt | ~pkt_has_started) :
~wait_for_threshold) | fifo_too_small_r;
assign in_pkt_eop_arrive = in_valid & in_ready & in_endofpacket;
assign in_pkt_start = in_valid & in_ready & in_startofpacket;
assign in_pkt_error = in_valid & in_ready & |in_error;
assign out_pkt_sop_leave = out_valid & out_ready & out_startofpacket;
assign out_pkt_leave = out_valid & out_ready & out_endofpacket;
assign fifo_too_small = (pkt_mode ? wait_for_pkt : wait_for_threshold) & full & out_ready;
// count packets coming and going into the fifo
always @(posedge clk or posedge reset) begin
if (reset) begin
pkt_cnt <= 0;
pkt_has_started <= 0;
sop_has_left_fifo <= 0;
fifo_too_small_r <= 0;
pkt_cnt_eq_zero <= 1'b1;
pkt_cnt_eq_one <= 1'b0;
fifo_fill_level_lt_cut_through_threshold <= 1'b1;
end
else begin
fifo_fill_level_lt_cut_through_threshold <= fifo_fill_level < cut_through_threshold;
fifo_too_small_r <= fifo_too_small;
if( in_pkt_eop_arrive )
sop_has_left_fifo <= 1'b0;
else if (out_pkt_sop_leave & pkt_cnt_eq_zero )
sop_has_left_fifo <= 1'b1;
if (in_pkt_eop_arrive & ~out_pkt_leave & ~drop_on_error ) begin
pkt_cnt <= pkt_cnt + 1'b1;
pkt_cnt_eq_zero <= 0;
if (pkt_cnt == 0)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
else if((~in_pkt_eop_arrive | drop_on_error) & out_pkt_leave) begin
pkt_cnt <= pkt_cnt - 1'b1;
if (pkt_cnt == 1)
pkt_cnt_eq_zero <= 1'b1;
else
pkt_cnt_eq_zero <= 1'b0;
if (pkt_cnt == 2)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
if (in_pkt_start)
pkt_has_started <= 1'b1;
else if (in_pkt_eop_arrive)
pkt_has_started <= 1'b0;
end
end
// drop on error logic
always @(posedge clk or posedge reset) begin
if (reset) begin
sop_ptr <= 0;
error_in_pkt <= 0;
end
else begin
// save the location of the SOP
if ( in_pkt_start )
sop_ptr <= wr_ptr;
// remember if error in pkt
// log error only if packet has already started
if (in_pkt_eop_arrive)
error_in_pkt <= 1'b0;
else if ( in_pkt_error & (pkt_has_started | in_pkt_start))
error_in_pkt <= 1'b1;
end
end
assign drop_on_error = drop_on_error_en & (error_in_pkt | in_pkt_error) & in_pkt_eop_arrive &
~sop_has_left_fifo & ~(out_pkt_sop_leave & pkt_cnt_eq_zero);
assign curr_sop_ptr = (write && in_startofpacket && in_endofpacket) ? wr_ptr : sop_ptr;
end
else begin : gen_blk20_else
assign ok_to_forward = 1'b1;
assign drop_on_error = 1'b0;
if (ADDR_WIDTH <= 1)
assign curr_sop_ptr = 1'b0;
else
assign curr_sop_ptr = {ADDR_WIDTH - 1 { 1'b0 }};
end
endgenerate
// --------------------------------------------------
// Calculates the log2ceil of the input value
// --------------------------------------------------
function integer log2ceil;
input integer val;
reg[31:0] i;
begin
i = 1;
log2ceil = 0;
while (i < val) begin
log2ceil = log2ceil + 1;
i = i[30:0] << 1;
end
end
endfunction
endmodule
|
// -----------------------------------------------------------
// Legal Notice: (C)2007 Altera Corporation. All rights reserved. Your
// use of Altera Corporation's design tools, logic functions and other
// software and tools, and its AMPP partner logic functions, and any
// output files any of the foregoing (including device programming or
// simulation files), and any associated documentation or information are
// expressly subject to the terms and conditions of the Altera Program
// License Subscription Agreement or other applicable license agreement,
// including, without limitation, that your use is for the sole purpose
// of programming logic devices manufactured by Altera and sold by Altera
// or its authorized distributors. Please refer to the applicable
// agreement for further details.
//
// Description: Single clock Avalon-ST FIFO.
// -----------------------------------------------------------
`timescale 1 ns / 1 ns
//altera message_off 10036
module altera_avalon_sc_fifo
#(
// --------------------------------------------------
// Parameters
// --------------------------------------------------
parameter SYMBOLS_PER_BEAT = 1,
parameter BITS_PER_SYMBOL = 8,
parameter FIFO_DEPTH = 16,
parameter CHANNEL_WIDTH = 0,
parameter ERROR_WIDTH = 0,
parameter USE_PACKETS = 0,
parameter USE_FILL_LEVEL = 0,
parameter USE_STORE_FORWARD = 0,
parameter USE_ALMOST_FULL_IF = 0,
parameter USE_ALMOST_EMPTY_IF = 0,
// --------------------------------------------------
// Empty latency is defined as the number of cycles
// required for a write to deassert the empty flag.
// For example, a latency of 1 means that the empty
// flag is deasserted on the cycle after a write.
//
// Another way to think of it is the latency for a
// write to propagate to the output.
//
// An empty latency of 0 implies lookahead, which is
// only implemented for the register-based FIFO.
// --------------------------------------------------
parameter EMPTY_LATENCY = 3,
parameter USE_MEMORY_BLOCKS = 1,
// --------------------------------------------------
// Internal Parameters
// --------------------------------------------------
parameter DATA_WIDTH = SYMBOLS_PER_BEAT * BITS_PER_SYMBOL,
parameter EMPTY_WIDTH = log2ceil(SYMBOLS_PER_BEAT)
)
(
// --------------------------------------------------
// Ports
// --------------------------------------------------
input clk,
input reset,
input [DATA_WIDTH-1: 0] in_data,
input in_valid,
input in_startofpacket,
input in_endofpacket,
input [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] in_empty,
input [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] in_error,
input [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] in_channel,
output in_ready,
output [DATA_WIDTH-1 : 0] out_data,
output reg out_valid,
output out_startofpacket,
output out_endofpacket,
output [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] out_empty,
output [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] out_error,
output [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] out_channel,
input out_ready,
input [(USE_STORE_FORWARD ? 2 : 1) : 0] csr_address,
input csr_write,
input csr_read,
input [31 : 0] csr_writedata,
output reg [31 : 0] csr_readdata,
output wire almost_full_data,
output wire almost_empty_data
);
// --------------------------------------------------
// Local Parameters
// --------------------------------------------------
localparam ADDR_WIDTH = log2ceil(FIFO_DEPTH);
localparam DEPTH = FIFO_DEPTH;
localparam PKT_SIGNALS_WIDTH = 2 + EMPTY_WIDTH;
localparam PAYLOAD_WIDTH = (USE_PACKETS == 1) ?
2 + EMPTY_WIDTH + DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH:
DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH;
// --------------------------------------------------
// Internal Signals
// --------------------------------------------------
genvar i;
reg [PAYLOAD_WIDTH-1 : 0] mem [DEPTH-1 : 0];
reg [ADDR_WIDTH-1 : 0] wr_ptr;
reg [ADDR_WIDTH-1 : 0] rd_ptr;
reg [DEPTH-1 : 0] mem_used;
wire [ADDR_WIDTH-1 : 0] next_wr_ptr;
wire [ADDR_WIDTH-1 : 0] next_rd_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_wr_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_rd_ptr;
wire [ADDR_WIDTH-1 : 0] mem_rd_ptr;
wire read;
wire write;
reg empty;
reg next_empty;
reg full;
reg next_full;
wire [PKT_SIGNALS_WIDTH-1 : 0] in_packet_signals;
wire [PKT_SIGNALS_WIDTH-1 : 0] out_packet_signals;
wire [PAYLOAD_WIDTH-1 : 0] in_payload;
reg [PAYLOAD_WIDTH-1 : 0] internal_out_payload;
reg [PAYLOAD_WIDTH-1 : 0] out_payload;
reg internal_out_valid;
wire internal_out_ready;
reg [ADDR_WIDTH : 0] fifo_fill_level;
reg [ADDR_WIDTH : 0] fill_level;
reg [ADDR_WIDTH-1 : 0] sop_ptr = 0;
wire [ADDR_WIDTH-1 : 0] curr_sop_ptr;
reg [23:0] almost_full_threshold;
reg [23:0] almost_empty_threshold;
reg [23:0] cut_through_threshold;
reg [15:0] pkt_cnt;
reg drop_on_error_en;
reg error_in_pkt;
reg pkt_has_started;
reg sop_has_left_fifo;
reg fifo_too_small_r;
reg pkt_cnt_eq_zero;
reg pkt_cnt_eq_one;
wire wait_for_threshold;
reg pkt_mode;
wire wait_for_pkt;
wire ok_to_forward;
wire in_pkt_eop_arrive;
wire out_pkt_leave;
wire in_pkt_start;
wire in_pkt_error;
wire drop_on_error;
wire fifo_too_small;
wire out_pkt_sop_leave;
wire [31:0] max_fifo_size;
reg fifo_fill_level_lt_cut_through_threshold;
// --------------------------------------------------
// Define Payload
//
// Icky part where we decide which signals form the
// payload to the FIFO with generate blocks.
// --------------------------------------------------
generate
if (EMPTY_WIDTH > 0) begin : gen_blk1
assign in_packet_signals = {in_startofpacket, in_endofpacket, in_empty};
assign {out_startofpacket, out_endofpacket, out_empty} = out_packet_signals;
end
else begin : gen_blk1_else
assign out_empty = in_error;
assign in_packet_signals = {in_startofpacket, in_endofpacket};
assign {out_startofpacket, out_endofpacket} = out_packet_signals;
end
endgenerate
generate
if (USE_PACKETS) begin : gen_blk2
if (ERROR_WIDTH > 0) begin : gen_blk3
if (CHANNEL_WIDTH > 0) begin : gen_blk4
assign in_payload = {in_packet_signals, in_data, in_error, in_channel};
assign {out_packet_signals, out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk4_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data, in_error};
assign {out_packet_signals, out_data, out_error} = out_payload;
end
end
else begin : gen_blk3_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk5
assign in_payload = {in_packet_signals, in_data, in_channel};
assign {out_packet_signals, out_data, out_channel} = out_payload;
end
else begin : gen_blk5_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data};
assign {out_packet_signals, out_data} = out_payload;
end
end
end
else begin : gen_blk2_else
assign out_packet_signals = 0;
if (ERROR_WIDTH > 0) begin : gen_blk6
if (CHANNEL_WIDTH > 0) begin : gen_blk7
assign in_payload = {in_data, in_error, in_channel};
assign {out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk7_else
assign out_channel = in_channel;
assign in_payload = {in_data, in_error};
assign {out_data, out_error} = out_payload;
end
end
else begin : gen_blk6_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk8
assign in_payload = {in_data, in_channel};
assign {out_data, out_channel} = out_payload;
end
else begin : gen_blk8_else
assign out_channel = in_channel;
assign in_payload = in_data;
assign out_data = out_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Memory-based FIFO storage
//
// To allow a ready latency of 0, the read index is
// obtained from the next read pointer and memory
// outputs are unregistered.
//
// If the empty latency is 1, we infer bypass logic
// around the memory so writes propagate to the
// outputs on the next cycle.
//
// Do not change the way this is coded: Quartus needs
// a perfect match to the template, and any attempt to
// refactor the two always blocks into one will break
// memory inference.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk9
if (EMPTY_LATENCY == 1) begin : gen_blk10
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] = in_payload;
internal_out_payload = mem[mem_rd_ptr];
end
end else begin : gen_blk10_else
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] <= in_payload;
internal_out_payload <= mem[mem_rd_ptr];
end
end
assign mem_rd_ptr = next_rd_ptr;
end else begin : gen_blk9_else
// --------------------------------------------------
// Register-based FIFO storage
//
// Uses a shift register as the storage element. Each
// shift register slot has a bit which indicates if
// the slot is occupied (credit to Sam H for the idea).
// The occupancy bits are contiguous and start from the
// lsb, so 0000, 0001, 0011, 0111, 1111 for a 4-deep
// FIFO.
//
// Each slot is enabled during a read or when it
// is unoccupied. New data is always written to every
// going-to-be-empty slot (we keep track of which ones
// are actually useful with the occupancy bits). On a
// read we shift occupied slots.
//
// The exception is the last slot, which always gets
// new data when it is unoccupied.
// --------------------------------------------------
for (i = 0; i < DEPTH-1; i = i + 1) begin : shift_reg
always @(posedge clk or posedge reset) begin
if (reset) begin
mem[i] <= 0;
end
else if (read || !mem_used[i]) begin
if (!mem_used[i+1])
mem[i] <= in_payload;
else
mem[i] <= mem[i+1];
end
end
end
always @(posedge clk, posedge reset) begin
if (reset) begin
mem[DEPTH-1] <= 0;
end
else begin
if (DEPTH == 1) begin
if (write)
mem[DEPTH-1] <= in_payload;
end
else if (!mem_used[DEPTH-1])
mem[DEPTH-1] <= in_payload;
end
end
end
endgenerate
assign read = internal_out_ready && internal_out_valid && ok_to_forward;
assign write = in_ready && in_valid;
// --------------------------------------------------
// Pointer Management
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk11
assign incremented_wr_ptr = wr_ptr + 1'b1;
assign incremented_rd_ptr = rd_ptr + 1'b1;
assign next_wr_ptr = drop_on_error ? curr_sop_ptr : write ? incremented_wr_ptr : wr_ptr;
assign next_rd_ptr = (read) ? incremented_rd_ptr : rd_ptr;
always @(posedge clk or posedge reset) begin
if (reset) begin
wr_ptr <= 0;
rd_ptr <= 0;
end
else begin
wr_ptr <= next_wr_ptr;
rd_ptr <= next_rd_ptr;
end
end
end else begin : gen_blk11_else
// --------------------------------------------------
// Shift Register Occupancy Bits
//
// Consider a 4-deep FIFO with 2 entries: 0011
// On a read and write, do not modify the bits.
// On a write, left-shift the bits to get 0111.
// On a read, right-shift the bits to get 0001.
//
// Also, on a write we set bit0 (the head), while
// clearing the tail on a read.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[0] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[0] <= 1;
else if (read) begin
if (DEPTH > 1)
mem_used[0] <= mem_used[1];
else
mem_used[0] <= 0;
end
end
end
end
if (DEPTH > 1) begin : gen_blk12
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[DEPTH-1] <= 0;
end
else begin
if (write ^ read) begin
mem_used[DEPTH-1] <= 0;
if (write)
mem_used[DEPTH-1] <= mem_used[DEPTH-2];
end
end
end
end
for (i = 1; i < DEPTH-1; i = i + 1) begin : storage_logic
always @(posedge clk, posedge reset) begin
if (reset) begin
mem_used[i] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[i] <= mem_used[i-1];
else if (read)
mem_used[i] <= mem_used[i+1];
end
end
end
end
end
endgenerate
// --------------------------------------------------
// Memory FIFO Status Management
//
// Generates the full and empty signals from the
// pointers. The FIFO is full when the next write
// pointer will be equal to the read pointer after
// a write. Reading from a FIFO clears full.
//
// The FIFO is empty when the next read pointer will
// be equal to the write pointer after a read. Writing
// to a FIFO clears empty.
//
// A simultaneous read and write must not change any of
// the empty or full flags unless there is a drop on error event.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk13
always @* begin
next_full = full;
next_empty = empty;
if (read && !write) begin
next_full = 1'b0;
if (incremented_rd_ptr == wr_ptr)
next_empty = 1'b1;
end
if (write && !read) begin
if (!drop_on_error)
next_empty = 1'b0;
else if (curr_sop_ptr == rd_ptr) // drop on error and only 1 pkt in fifo
next_empty = 1'b1;
if (incremented_wr_ptr == rd_ptr && !drop_on_error)
next_full = 1'b1;
end
if (write && read && drop_on_error) begin
if (curr_sop_ptr == next_rd_ptr)
next_empty = 1'b1;
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
empty <= 1;
full <= 0;
end
else begin
empty <= next_empty;
full <= next_full;
end
end
end else begin : gen_blk13_else
// --------------------------------------------------
// Register FIFO Status Management
//
// Full when the tail occupancy bit is 1. Empty when
// the head occupancy bit is 0.
// --------------------------------------------------
always @* begin
full = mem_used[DEPTH-1];
empty = !mem_used[0];
// ------------------------------------------
// For a single slot FIFO, reading clears the
// full status immediately.
// ------------------------------------------
if (DEPTH == 1)
full = mem_used[0] && !read;
internal_out_payload = mem[0];
// ------------------------------------------
// Writes clear empty immediately for lookahead modes.
// Note that we use in_valid instead of write to avoid
// combinational loops (in lookahead mode, qualifying
// with in_ready is meaningless).
//
// In a 1-deep FIFO, a possible combinational loop runs
// from write -> out_valid -> out_ready -> write
// ------------------------------------------
if (EMPTY_LATENCY == 0) begin
empty = !mem_used[0] && !in_valid;
if (!mem_used[0] && in_valid)
internal_out_payload = in_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Avalon-ST Signals
//
// The in_ready signal is straightforward.
//
// To match memory latency when empty latency > 1,
// out_valid assertions must be delayed by one clock
// cycle.
//
// Note: out_valid deassertions must not be delayed or
// the FIFO will underflow.
// --------------------------------------------------
assign in_ready = !full;
assign internal_out_ready = out_ready || !out_valid;
generate if (EMPTY_LATENCY > 1) begin : gen_blk14
always @(posedge clk or posedge reset) begin
if (reset)
internal_out_valid <= 0;
else begin
internal_out_valid <= !empty & ok_to_forward & ~drop_on_error;
if (read) begin
if (incremented_rd_ptr == wr_ptr)
internal_out_valid <= 1'b0;
end
end
end
end else begin : gen_blk14_else
always @* begin
internal_out_valid = !empty & ok_to_forward;
end
end
endgenerate
// --------------------------------------------------
// Single Output Pipeline Stage
//
// This output pipeline stage is enabled if the FIFO's
// empty latency is set to 3 (default). It is disabled
// for all other allowed latencies.
//
// Reason: The memory outputs are unregistered, so we have to
// register the output or fmax will drop if combinatorial
// logic is present on the output datapath.
//
// Q: The Avalon-ST spec says that I have to register my outputs
// But isn't the memory counted as a register?
// A: The path from the address lookup to the memory output is
// slow. Registering the memory outputs is a good idea.
//
// The registers get packed into the memory by the fitter
// which means minimal resources are consumed (the result
// is a altsyncram with registered outputs, available on
// all modern Altera devices).
//
// This output stage acts as an extra slot in the FIFO,
// and complicates the fill level.
// --------------------------------------------------
generate if (EMPTY_LATENCY == 3) begin : gen_blk15
always @(posedge clk or posedge reset) begin
if (reset) begin
out_valid <= 0;
out_payload <= 0;
end
else begin
if (internal_out_ready) begin
out_valid <= internal_out_valid & ok_to_forward;
out_payload <= internal_out_payload;
end
end
end
end
else begin : gen_blk15_else
always @* begin
out_valid = internal_out_valid;
out_payload = internal_out_payload;
end
end
endgenerate
// --------------------------------------------------
// Fill Level
//
// The fill level is calculated from the next write
// and read pointers to avoid unnecessary latency
// and logic.
//
// However, if the store-and-forward mode of the FIFO
// is enabled, the fill level is an up-down counter
// for fmax optimization reasons.
//
// If the output pipeline is enabled, the fill level
// must account for it, or we'll always be off by one.
// This may, or may not be important depending on the
// application.
//
// For now, we'll always calculate the exact fill level
// at the cost of an extra adder when the output stage
// is enabled.
// --------------------------------------------------
generate if (USE_FILL_LEVEL) begin : gen_blk16
wire [31:0] depth32;
assign depth32 = DEPTH;
if (USE_STORE_FORWARD) begin
reg [ADDR_WIDTH : 0] curr_packet_len_less_one;
// --------------------------------------------------
// We only drop on endofpacket. As long as we don't add to the fill
// level on the dropped endofpacket cycle, we can simply subtract
// (packet length - 1) from the fill level for dropped packets.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
curr_packet_len_less_one <= 0;
end else begin
if (write) begin
curr_packet_len_less_one <= curr_packet_len_less_one + 1'b1;
if (in_endofpacket)
curr_packet_len_less_one <= 0;
end
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
fifo_fill_level <= 0;
end else if (drop_on_error) begin
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one;
if (read)
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one - 1'b1;
end else if (write && !read) begin
fifo_fill_level <= fifo_fill_level + 1'b1;
end else if (read && !write) begin
fifo_fill_level <= fifo_fill_level - 1'b1;
end
end
end else begin
always @(posedge clk or posedge reset) begin
if (reset)
fifo_fill_level <= 0;
else if (next_full & !drop_on_error)
fifo_fill_level <= depth32[ADDR_WIDTH:0];
else begin
fifo_fill_level[ADDR_WIDTH] <= 1'b0;
fifo_fill_level[ADDR_WIDTH-1 : 0] <= next_wr_ptr - next_rd_ptr;
end
end
end
always @* begin
fill_level = fifo_fill_level;
if (EMPTY_LATENCY == 3)
fill_level = fifo_fill_level + {{ADDR_WIDTH{1'b0}}, out_valid};
end
end
else begin : gen_blk16_else
always @* begin
fill_level = 0;
end
end
endgenerate
generate if (USE_ALMOST_FULL_IF) begin : gen_blk17
assign almost_full_data = (fill_level >= almost_full_threshold);
end
else
assign almost_full_data = 0;
endgenerate
generate if (USE_ALMOST_EMPTY_IF) begin : gen_blk18
assign almost_empty_data = (fill_level <= almost_empty_threshold);
end
else
assign almost_empty_data = 0;
endgenerate
// --------------------------------------------------
// Avalon-MM Status & Control Connection Point
//
// Register map:
//
// | Addr | RW | 31 - 0 |
// | 0 | R | Fill level |
//
// The registering of this connection point means
// that there is a cycle of latency between
// reads/writes and the updating of the fill level.
// --------------------------------------------------
generate if (USE_STORE_FORWARD) begin : gen_blk19
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
cut_through_threshold <= 0;
drop_on_error_en <= 0;
csr_readdata <= 0;
pkt_mode <= 1'b1;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 5)
csr_readdata <= {31'b0, drop_on_error_en};
else if (csr_address == 4)
csr_readdata <= {8'b0, cut_through_threshold};
else if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b101)
drop_on_error_en <= csr_writedata[0];
else if(csr_address == 3'b100) begin
cut_through_threshold <= csr_writedata[23:0];
pkt_mode <= (csr_writedata[23:0] == 0);
end
else if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else if (USE_ALMOST_FULL_IF || USE_ALMOST_EMPTY_IF) begin : gen_blk19_else1
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
csr_readdata <= 0;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else begin : gen_blk19_else2
always @(posedge clk or posedge reset) begin
if (reset) begin
csr_readdata <= 0;
end
else if (csr_read) begin
csr_readdata <= 0;
if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
end
end
endgenerate
// --------------------------------------------------
// Store and forward logic
// --------------------------------------------------
// if the fifo gets full before the entire packet or the
// cut-threshold condition is met then start sending out
// data in order to avoid dead-lock situation
generate if (USE_STORE_FORWARD) begin : gen_blk20
assign wait_for_threshold = (fifo_fill_level_lt_cut_through_threshold) & wait_for_pkt ;
assign wait_for_pkt = pkt_cnt_eq_zero | (pkt_cnt_eq_one & out_pkt_leave);
assign ok_to_forward = (pkt_mode ? (~wait_for_pkt | ~pkt_has_started) :
~wait_for_threshold) | fifo_too_small_r;
assign in_pkt_eop_arrive = in_valid & in_ready & in_endofpacket;
assign in_pkt_start = in_valid & in_ready & in_startofpacket;
assign in_pkt_error = in_valid & in_ready & |in_error;
assign out_pkt_sop_leave = out_valid & out_ready & out_startofpacket;
assign out_pkt_leave = out_valid & out_ready & out_endofpacket;
assign fifo_too_small = (pkt_mode ? wait_for_pkt : wait_for_threshold) & full & out_ready;
// count packets coming and going into the fifo
always @(posedge clk or posedge reset) begin
if (reset) begin
pkt_cnt <= 0;
pkt_has_started <= 0;
sop_has_left_fifo <= 0;
fifo_too_small_r <= 0;
pkt_cnt_eq_zero <= 1'b1;
pkt_cnt_eq_one <= 1'b0;
fifo_fill_level_lt_cut_through_threshold <= 1'b1;
end
else begin
fifo_fill_level_lt_cut_through_threshold <= fifo_fill_level < cut_through_threshold;
fifo_too_small_r <= fifo_too_small;
if( in_pkt_eop_arrive )
sop_has_left_fifo <= 1'b0;
else if (out_pkt_sop_leave & pkt_cnt_eq_zero )
sop_has_left_fifo <= 1'b1;
if (in_pkt_eop_arrive & ~out_pkt_leave & ~drop_on_error ) begin
pkt_cnt <= pkt_cnt + 1'b1;
pkt_cnt_eq_zero <= 0;
if (pkt_cnt == 0)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
else if((~in_pkt_eop_arrive | drop_on_error) & out_pkt_leave) begin
pkt_cnt <= pkt_cnt - 1'b1;
if (pkt_cnt == 1)
pkt_cnt_eq_zero <= 1'b1;
else
pkt_cnt_eq_zero <= 1'b0;
if (pkt_cnt == 2)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
if (in_pkt_start)
pkt_has_started <= 1'b1;
else if (in_pkt_eop_arrive)
pkt_has_started <= 1'b0;
end
end
// drop on error logic
always @(posedge clk or posedge reset) begin
if (reset) begin
sop_ptr <= 0;
error_in_pkt <= 0;
end
else begin
// save the location of the SOP
if ( in_pkt_start )
sop_ptr <= wr_ptr;
// remember if error in pkt
// log error only if packet has already started
if (in_pkt_eop_arrive)
error_in_pkt <= 1'b0;
else if ( in_pkt_error & (pkt_has_started | in_pkt_start))
error_in_pkt <= 1'b1;
end
end
assign drop_on_error = drop_on_error_en & (error_in_pkt | in_pkt_error) & in_pkt_eop_arrive &
~sop_has_left_fifo & ~(out_pkt_sop_leave & pkt_cnt_eq_zero);
assign curr_sop_ptr = (write && in_startofpacket && in_endofpacket) ? wr_ptr : sop_ptr;
end
else begin : gen_blk20_else
assign ok_to_forward = 1'b1;
assign drop_on_error = 1'b0;
if (ADDR_WIDTH <= 1)
assign curr_sop_ptr = 1'b0;
else
assign curr_sop_ptr = {ADDR_WIDTH - 1 { 1'b0 }};
end
endgenerate
// --------------------------------------------------
// Calculates the log2ceil of the input value
// --------------------------------------------------
function integer log2ceil;
input integer val;
reg[31:0] i;
begin
i = 1;
log2ceil = 0;
while (i < val) begin
log2ceil = log2ceil + 1;
i = i[30:0] << 1;
end
end
endfunction
endmodule
|
// -----------------------------------------------------------
// Legal Notice: (C)2007 Altera Corporation. All rights reserved. Your
// use of Altera Corporation's design tools, logic functions and other
// software and tools, and its AMPP partner logic functions, and any
// output files any of the foregoing (including device programming or
// simulation files), and any associated documentation or information are
// expressly subject to the terms and conditions of the Altera Program
// License Subscription Agreement or other applicable license agreement,
// including, without limitation, that your use is for the sole purpose
// of programming logic devices manufactured by Altera and sold by Altera
// or its authorized distributors. Please refer to the applicable
// agreement for further details.
//
// Description: Single clock Avalon-ST FIFO.
// -----------------------------------------------------------
`timescale 1 ns / 1 ns
//altera message_off 10036
module altera_avalon_sc_fifo
#(
// --------------------------------------------------
// Parameters
// --------------------------------------------------
parameter SYMBOLS_PER_BEAT = 1,
parameter BITS_PER_SYMBOL = 8,
parameter FIFO_DEPTH = 16,
parameter CHANNEL_WIDTH = 0,
parameter ERROR_WIDTH = 0,
parameter USE_PACKETS = 0,
parameter USE_FILL_LEVEL = 0,
parameter USE_STORE_FORWARD = 0,
parameter USE_ALMOST_FULL_IF = 0,
parameter USE_ALMOST_EMPTY_IF = 0,
// --------------------------------------------------
// Empty latency is defined as the number of cycles
// required for a write to deassert the empty flag.
// For example, a latency of 1 means that the empty
// flag is deasserted on the cycle after a write.
//
// Another way to think of it is the latency for a
// write to propagate to the output.
//
// An empty latency of 0 implies lookahead, which is
// only implemented for the register-based FIFO.
// --------------------------------------------------
parameter EMPTY_LATENCY = 3,
parameter USE_MEMORY_BLOCKS = 1,
// --------------------------------------------------
// Internal Parameters
// --------------------------------------------------
parameter DATA_WIDTH = SYMBOLS_PER_BEAT * BITS_PER_SYMBOL,
parameter EMPTY_WIDTH = log2ceil(SYMBOLS_PER_BEAT)
)
(
// --------------------------------------------------
// Ports
// --------------------------------------------------
input clk,
input reset,
input [DATA_WIDTH-1: 0] in_data,
input in_valid,
input in_startofpacket,
input in_endofpacket,
input [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] in_empty,
input [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] in_error,
input [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] in_channel,
output in_ready,
output [DATA_WIDTH-1 : 0] out_data,
output reg out_valid,
output out_startofpacket,
output out_endofpacket,
output [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] out_empty,
output [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] out_error,
output [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] out_channel,
input out_ready,
input [(USE_STORE_FORWARD ? 2 : 1) : 0] csr_address,
input csr_write,
input csr_read,
input [31 : 0] csr_writedata,
output reg [31 : 0] csr_readdata,
output wire almost_full_data,
output wire almost_empty_data
);
// --------------------------------------------------
// Local Parameters
// --------------------------------------------------
localparam ADDR_WIDTH = log2ceil(FIFO_DEPTH);
localparam DEPTH = FIFO_DEPTH;
localparam PKT_SIGNALS_WIDTH = 2 + EMPTY_WIDTH;
localparam PAYLOAD_WIDTH = (USE_PACKETS == 1) ?
2 + EMPTY_WIDTH + DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH:
DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH;
// --------------------------------------------------
// Internal Signals
// --------------------------------------------------
genvar i;
reg [PAYLOAD_WIDTH-1 : 0] mem [DEPTH-1 : 0];
reg [ADDR_WIDTH-1 : 0] wr_ptr;
reg [ADDR_WIDTH-1 : 0] rd_ptr;
reg [DEPTH-1 : 0] mem_used;
wire [ADDR_WIDTH-1 : 0] next_wr_ptr;
wire [ADDR_WIDTH-1 : 0] next_rd_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_wr_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_rd_ptr;
wire [ADDR_WIDTH-1 : 0] mem_rd_ptr;
wire read;
wire write;
reg empty;
reg next_empty;
reg full;
reg next_full;
wire [PKT_SIGNALS_WIDTH-1 : 0] in_packet_signals;
wire [PKT_SIGNALS_WIDTH-1 : 0] out_packet_signals;
wire [PAYLOAD_WIDTH-1 : 0] in_payload;
reg [PAYLOAD_WIDTH-1 : 0] internal_out_payload;
reg [PAYLOAD_WIDTH-1 : 0] out_payload;
reg internal_out_valid;
wire internal_out_ready;
reg [ADDR_WIDTH : 0] fifo_fill_level;
reg [ADDR_WIDTH : 0] fill_level;
reg [ADDR_WIDTH-1 : 0] sop_ptr = 0;
wire [ADDR_WIDTH-1 : 0] curr_sop_ptr;
reg [23:0] almost_full_threshold;
reg [23:0] almost_empty_threshold;
reg [23:0] cut_through_threshold;
reg [15:0] pkt_cnt;
reg drop_on_error_en;
reg error_in_pkt;
reg pkt_has_started;
reg sop_has_left_fifo;
reg fifo_too_small_r;
reg pkt_cnt_eq_zero;
reg pkt_cnt_eq_one;
wire wait_for_threshold;
reg pkt_mode;
wire wait_for_pkt;
wire ok_to_forward;
wire in_pkt_eop_arrive;
wire out_pkt_leave;
wire in_pkt_start;
wire in_pkt_error;
wire drop_on_error;
wire fifo_too_small;
wire out_pkt_sop_leave;
wire [31:0] max_fifo_size;
reg fifo_fill_level_lt_cut_through_threshold;
// --------------------------------------------------
// Define Payload
//
// Icky part where we decide which signals form the
// payload to the FIFO with generate blocks.
// --------------------------------------------------
generate
if (EMPTY_WIDTH > 0) begin : gen_blk1
assign in_packet_signals = {in_startofpacket, in_endofpacket, in_empty};
assign {out_startofpacket, out_endofpacket, out_empty} = out_packet_signals;
end
else begin : gen_blk1_else
assign out_empty = in_error;
assign in_packet_signals = {in_startofpacket, in_endofpacket};
assign {out_startofpacket, out_endofpacket} = out_packet_signals;
end
endgenerate
generate
if (USE_PACKETS) begin : gen_blk2
if (ERROR_WIDTH > 0) begin : gen_blk3
if (CHANNEL_WIDTH > 0) begin : gen_blk4
assign in_payload = {in_packet_signals, in_data, in_error, in_channel};
assign {out_packet_signals, out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk4_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data, in_error};
assign {out_packet_signals, out_data, out_error} = out_payload;
end
end
else begin : gen_blk3_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk5
assign in_payload = {in_packet_signals, in_data, in_channel};
assign {out_packet_signals, out_data, out_channel} = out_payload;
end
else begin : gen_blk5_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data};
assign {out_packet_signals, out_data} = out_payload;
end
end
end
else begin : gen_blk2_else
assign out_packet_signals = 0;
if (ERROR_WIDTH > 0) begin : gen_blk6
if (CHANNEL_WIDTH > 0) begin : gen_blk7
assign in_payload = {in_data, in_error, in_channel};
assign {out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk7_else
assign out_channel = in_channel;
assign in_payload = {in_data, in_error};
assign {out_data, out_error} = out_payload;
end
end
else begin : gen_blk6_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk8
assign in_payload = {in_data, in_channel};
assign {out_data, out_channel} = out_payload;
end
else begin : gen_blk8_else
assign out_channel = in_channel;
assign in_payload = in_data;
assign out_data = out_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Memory-based FIFO storage
//
// To allow a ready latency of 0, the read index is
// obtained from the next read pointer and memory
// outputs are unregistered.
//
// If the empty latency is 1, we infer bypass logic
// around the memory so writes propagate to the
// outputs on the next cycle.
//
// Do not change the way this is coded: Quartus needs
// a perfect match to the template, and any attempt to
// refactor the two always blocks into one will break
// memory inference.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk9
if (EMPTY_LATENCY == 1) begin : gen_blk10
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] = in_payload;
internal_out_payload = mem[mem_rd_ptr];
end
end else begin : gen_blk10_else
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] <= in_payload;
internal_out_payload <= mem[mem_rd_ptr];
end
end
assign mem_rd_ptr = next_rd_ptr;
end else begin : gen_blk9_else
// --------------------------------------------------
// Register-based FIFO storage
//
// Uses a shift register as the storage element. Each
// shift register slot has a bit which indicates if
// the slot is occupied (credit to Sam H for the idea).
// The occupancy bits are contiguous and start from the
// lsb, so 0000, 0001, 0011, 0111, 1111 for a 4-deep
// FIFO.
//
// Each slot is enabled during a read or when it
// is unoccupied. New data is always written to every
// going-to-be-empty slot (we keep track of which ones
// are actually useful with the occupancy bits). On a
// read we shift occupied slots.
//
// The exception is the last slot, which always gets
// new data when it is unoccupied.
// --------------------------------------------------
for (i = 0; i < DEPTH-1; i = i + 1) begin : shift_reg
always @(posedge clk or posedge reset) begin
if (reset) begin
mem[i] <= 0;
end
else if (read || !mem_used[i]) begin
if (!mem_used[i+1])
mem[i] <= in_payload;
else
mem[i] <= mem[i+1];
end
end
end
always @(posedge clk, posedge reset) begin
if (reset) begin
mem[DEPTH-1] <= 0;
end
else begin
if (DEPTH == 1) begin
if (write)
mem[DEPTH-1] <= in_payload;
end
else if (!mem_used[DEPTH-1])
mem[DEPTH-1] <= in_payload;
end
end
end
endgenerate
assign read = internal_out_ready && internal_out_valid && ok_to_forward;
assign write = in_ready && in_valid;
// --------------------------------------------------
// Pointer Management
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk11
assign incremented_wr_ptr = wr_ptr + 1'b1;
assign incremented_rd_ptr = rd_ptr + 1'b1;
assign next_wr_ptr = drop_on_error ? curr_sop_ptr : write ? incremented_wr_ptr : wr_ptr;
assign next_rd_ptr = (read) ? incremented_rd_ptr : rd_ptr;
always @(posedge clk or posedge reset) begin
if (reset) begin
wr_ptr <= 0;
rd_ptr <= 0;
end
else begin
wr_ptr <= next_wr_ptr;
rd_ptr <= next_rd_ptr;
end
end
end else begin : gen_blk11_else
// --------------------------------------------------
// Shift Register Occupancy Bits
//
// Consider a 4-deep FIFO with 2 entries: 0011
// On a read and write, do not modify the bits.
// On a write, left-shift the bits to get 0111.
// On a read, right-shift the bits to get 0001.
//
// Also, on a write we set bit0 (the head), while
// clearing the tail on a read.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[0] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[0] <= 1;
else if (read) begin
if (DEPTH > 1)
mem_used[0] <= mem_used[1];
else
mem_used[0] <= 0;
end
end
end
end
if (DEPTH > 1) begin : gen_blk12
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[DEPTH-1] <= 0;
end
else begin
if (write ^ read) begin
mem_used[DEPTH-1] <= 0;
if (write)
mem_used[DEPTH-1] <= mem_used[DEPTH-2];
end
end
end
end
for (i = 1; i < DEPTH-1; i = i + 1) begin : storage_logic
always @(posedge clk, posedge reset) begin
if (reset) begin
mem_used[i] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[i] <= mem_used[i-1];
else if (read)
mem_used[i] <= mem_used[i+1];
end
end
end
end
end
endgenerate
// --------------------------------------------------
// Memory FIFO Status Management
//
// Generates the full and empty signals from the
// pointers. The FIFO is full when the next write
// pointer will be equal to the read pointer after
// a write. Reading from a FIFO clears full.
//
// The FIFO is empty when the next read pointer will
// be equal to the write pointer after a read. Writing
// to a FIFO clears empty.
//
// A simultaneous read and write must not change any of
// the empty or full flags unless there is a drop on error event.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk13
always @* begin
next_full = full;
next_empty = empty;
if (read && !write) begin
next_full = 1'b0;
if (incremented_rd_ptr == wr_ptr)
next_empty = 1'b1;
end
if (write && !read) begin
if (!drop_on_error)
next_empty = 1'b0;
else if (curr_sop_ptr == rd_ptr) // drop on error and only 1 pkt in fifo
next_empty = 1'b1;
if (incremented_wr_ptr == rd_ptr && !drop_on_error)
next_full = 1'b1;
end
if (write && read && drop_on_error) begin
if (curr_sop_ptr == next_rd_ptr)
next_empty = 1'b1;
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
empty <= 1;
full <= 0;
end
else begin
empty <= next_empty;
full <= next_full;
end
end
end else begin : gen_blk13_else
// --------------------------------------------------
// Register FIFO Status Management
//
// Full when the tail occupancy bit is 1. Empty when
// the head occupancy bit is 0.
// --------------------------------------------------
always @* begin
full = mem_used[DEPTH-1];
empty = !mem_used[0];
// ------------------------------------------
// For a single slot FIFO, reading clears the
// full status immediately.
// ------------------------------------------
if (DEPTH == 1)
full = mem_used[0] && !read;
internal_out_payload = mem[0];
// ------------------------------------------
// Writes clear empty immediately for lookahead modes.
// Note that we use in_valid instead of write to avoid
// combinational loops (in lookahead mode, qualifying
// with in_ready is meaningless).
//
// In a 1-deep FIFO, a possible combinational loop runs
// from write -> out_valid -> out_ready -> write
// ------------------------------------------
if (EMPTY_LATENCY == 0) begin
empty = !mem_used[0] && !in_valid;
if (!mem_used[0] && in_valid)
internal_out_payload = in_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Avalon-ST Signals
//
// The in_ready signal is straightforward.
//
// To match memory latency when empty latency > 1,
// out_valid assertions must be delayed by one clock
// cycle.
//
// Note: out_valid deassertions must not be delayed or
// the FIFO will underflow.
// --------------------------------------------------
assign in_ready = !full;
assign internal_out_ready = out_ready || !out_valid;
generate if (EMPTY_LATENCY > 1) begin : gen_blk14
always @(posedge clk or posedge reset) begin
if (reset)
internal_out_valid <= 0;
else begin
internal_out_valid <= !empty & ok_to_forward & ~drop_on_error;
if (read) begin
if (incremented_rd_ptr == wr_ptr)
internal_out_valid <= 1'b0;
end
end
end
end else begin : gen_blk14_else
always @* begin
internal_out_valid = !empty & ok_to_forward;
end
end
endgenerate
// --------------------------------------------------
// Single Output Pipeline Stage
//
// This output pipeline stage is enabled if the FIFO's
// empty latency is set to 3 (default). It is disabled
// for all other allowed latencies.
//
// Reason: The memory outputs are unregistered, so we have to
// register the output or fmax will drop if combinatorial
// logic is present on the output datapath.
//
// Q: The Avalon-ST spec says that I have to register my outputs
// But isn't the memory counted as a register?
// A: The path from the address lookup to the memory output is
// slow. Registering the memory outputs is a good idea.
//
// The registers get packed into the memory by the fitter
// which means minimal resources are consumed (the result
// is a altsyncram with registered outputs, available on
// all modern Altera devices).
//
// This output stage acts as an extra slot in the FIFO,
// and complicates the fill level.
// --------------------------------------------------
generate if (EMPTY_LATENCY == 3) begin : gen_blk15
always @(posedge clk or posedge reset) begin
if (reset) begin
out_valid <= 0;
out_payload <= 0;
end
else begin
if (internal_out_ready) begin
out_valid <= internal_out_valid & ok_to_forward;
out_payload <= internal_out_payload;
end
end
end
end
else begin : gen_blk15_else
always @* begin
out_valid = internal_out_valid;
out_payload = internal_out_payload;
end
end
endgenerate
// --------------------------------------------------
// Fill Level
//
// The fill level is calculated from the next write
// and read pointers to avoid unnecessary latency
// and logic.
//
// However, if the store-and-forward mode of the FIFO
// is enabled, the fill level is an up-down counter
// for fmax optimization reasons.
//
// If the output pipeline is enabled, the fill level
// must account for it, or we'll always be off by one.
// This may, or may not be important depending on the
// application.
//
// For now, we'll always calculate the exact fill level
// at the cost of an extra adder when the output stage
// is enabled.
// --------------------------------------------------
generate if (USE_FILL_LEVEL) begin : gen_blk16
wire [31:0] depth32;
assign depth32 = DEPTH;
if (USE_STORE_FORWARD) begin
reg [ADDR_WIDTH : 0] curr_packet_len_less_one;
// --------------------------------------------------
// We only drop on endofpacket. As long as we don't add to the fill
// level on the dropped endofpacket cycle, we can simply subtract
// (packet length - 1) from the fill level for dropped packets.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
curr_packet_len_less_one <= 0;
end else begin
if (write) begin
curr_packet_len_less_one <= curr_packet_len_less_one + 1'b1;
if (in_endofpacket)
curr_packet_len_less_one <= 0;
end
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
fifo_fill_level <= 0;
end else if (drop_on_error) begin
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one;
if (read)
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one - 1'b1;
end else if (write && !read) begin
fifo_fill_level <= fifo_fill_level + 1'b1;
end else if (read && !write) begin
fifo_fill_level <= fifo_fill_level - 1'b1;
end
end
end else begin
always @(posedge clk or posedge reset) begin
if (reset)
fifo_fill_level <= 0;
else if (next_full & !drop_on_error)
fifo_fill_level <= depth32[ADDR_WIDTH:0];
else begin
fifo_fill_level[ADDR_WIDTH] <= 1'b0;
fifo_fill_level[ADDR_WIDTH-1 : 0] <= next_wr_ptr - next_rd_ptr;
end
end
end
always @* begin
fill_level = fifo_fill_level;
if (EMPTY_LATENCY == 3)
fill_level = fifo_fill_level + {{ADDR_WIDTH{1'b0}}, out_valid};
end
end
else begin : gen_blk16_else
always @* begin
fill_level = 0;
end
end
endgenerate
generate if (USE_ALMOST_FULL_IF) begin : gen_blk17
assign almost_full_data = (fill_level >= almost_full_threshold);
end
else
assign almost_full_data = 0;
endgenerate
generate if (USE_ALMOST_EMPTY_IF) begin : gen_blk18
assign almost_empty_data = (fill_level <= almost_empty_threshold);
end
else
assign almost_empty_data = 0;
endgenerate
// --------------------------------------------------
// Avalon-MM Status & Control Connection Point
//
// Register map:
//
// | Addr | RW | 31 - 0 |
// | 0 | R | Fill level |
//
// The registering of this connection point means
// that there is a cycle of latency between
// reads/writes and the updating of the fill level.
// --------------------------------------------------
generate if (USE_STORE_FORWARD) begin : gen_blk19
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
cut_through_threshold <= 0;
drop_on_error_en <= 0;
csr_readdata <= 0;
pkt_mode <= 1'b1;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 5)
csr_readdata <= {31'b0, drop_on_error_en};
else if (csr_address == 4)
csr_readdata <= {8'b0, cut_through_threshold};
else if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b101)
drop_on_error_en <= csr_writedata[0];
else if(csr_address == 3'b100) begin
cut_through_threshold <= csr_writedata[23:0];
pkt_mode <= (csr_writedata[23:0] == 0);
end
else if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else if (USE_ALMOST_FULL_IF || USE_ALMOST_EMPTY_IF) begin : gen_blk19_else1
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
csr_readdata <= 0;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else begin : gen_blk19_else2
always @(posedge clk or posedge reset) begin
if (reset) begin
csr_readdata <= 0;
end
else if (csr_read) begin
csr_readdata <= 0;
if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
end
end
endgenerate
// --------------------------------------------------
// Store and forward logic
// --------------------------------------------------
// if the fifo gets full before the entire packet or the
// cut-threshold condition is met then start sending out
// data in order to avoid dead-lock situation
generate if (USE_STORE_FORWARD) begin : gen_blk20
assign wait_for_threshold = (fifo_fill_level_lt_cut_through_threshold) & wait_for_pkt ;
assign wait_for_pkt = pkt_cnt_eq_zero | (pkt_cnt_eq_one & out_pkt_leave);
assign ok_to_forward = (pkt_mode ? (~wait_for_pkt | ~pkt_has_started) :
~wait_for_threshold) | fifo_too_small_r;
assign in_pkt_eop_arrive = in_valid & in_ready & in_endofpacket;
assign in_pkt_start = in_valid & in_ready & in_startofpacket;
assign in_pkt_error = in_valid & in_ready & |in_error;
assign out_pkt_sop_leave = out_valid & out_ready & out_startofpacket;
assign out_pkt_leave = out_valid & out_ready & out_endofpacket;
assign fifo_too_small = (pkt_mode ? wait_for_pkt : wait_for_threshold) & full & out_ready;
// count packets coming and going into the fifo
always @(posedge clk or posedge reset) begin
if (reset) begin
pkt_cnt <= 0;
pkt_has_started <= 0;
sop_has_left_fifo <= 0;
fifo_too_small_r <= 0;
pkt_cnt_eq_zero <= 1'b1;
pkt_cnt_eq_one <= 1'b0;
fifo_fill_level_lt_cut_through_threshold <= 1'b1;
end
else begin
fifo_fill_level_lt_cut_through_threshold <= fifo_fill_level < cut_through_threshold;
fifo_too_small_r <= fifo_too_small;
if( in_pkt_eop_arrive )
sop_has_left_fifo <= 1'b0;
else if (out_pkt_sop_leave & pkt_cnt_eq_zero )
sop_has_left_fifo <= 1'b1;
if (in_pkt_eop_arrive & ~out_pkt_leave & ~drop_on_error ) begin
pkt_cnt <= pkt_cnt + 1'b1;
pkt_cnt_eq_zero <= 0;
if (pkt_cnt == 0)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
else if((~in_pkt_eop_arrive | drop_on_error) & out_pkt_leave) begin
pkt_cnt <= pkt_cnt - 1'b1;
if (pkt_cnt == 1)
pkt_cnt_eq_zero <= 1'b1;
else
pkt_cnt_eq_zero <= 1'b0;
if (pkt_cnt == 2)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
if (in_pkt_start)
pkt_has_started <= 1'b1;
else if (in_pkt_eop_arrive)
pkt_has_started <= 1'b0;
end
end
// drop on error logic
always @(posedge clk or posedge reset) begin
if (reset) begin
sop_ptr <= 0;
error_in_pkt <= 0;
end
else begin
// save the location of the SOP
if ( in_pkt_start )
sop_ptr <= wr_ptr;
// remember if error in pkt
// log error only if packet has already started
if (in_pkt_eop_arrive)
error_in_pkt <= 1'b0;
else if ( in_pkt_error & (pkt_has_started | in_pkt_start))
error_in_pkt <= 1'b1;
end
end
assign drop_on_error = drop_on_error_en & (error_in_pkt | in_pkt_error) & in_pkt_eop_arrive &
~sop_has_left_fifo & ~(out_pkt_sop_leave & pkt_cnt_eq_zero);
assign curr_sop_ptr = (write && in_startofpacket && in_endofpacket) ? wr_ptr : sop_ptr;
end
else begin : gen_blk20_else
assign ok_to_forward = 1'b1;
assign drop_on_error = 1'b0;
if (ADDR_WIDTH <= 1)
assign curr_sop_ptr = 1'b0;
else
assign curr_sop_ptr = {ADDR_WIDTH - 1 { 1'b0 }};
end
endgenerate
// --------------------------------------------------
// Calculates the log2ceil of the input value
// --------------------------------------------------
function integer log2ceil;
input integer val;
reg[31:0] i;
begin
i = 1;
log2ceil = 0;
while (i < val) begin
log2ceil = log2ceil + 1;
i = i[30:0] << 1;
end
end
endfunction
endmodule
|
// -----------------------------------------------------------
// Legal Notice: (C)2007 Altera Corporation. All rights reserved. Your
// use of Altera Corporation's design tools, logic functions and other
// software and tools, and its AMPP partner logic functions, and any
// output files any of the foregoing (including device programming or
// simulation files), and any associated documentation or information are
// expressly subject to the terms and conditions of the Altera Program
// License Subscription Agreement or other applicable license agreement,
// including, without limitation, that your use is for the sole purpose
// of programming logic devices manufactured by Altera and sold by Altera
// or its authorized distributors. Please refer to the applicable
// agreement for further details.
//
// Description: Single clock Avalon-ST FIFO.
// -----------------------------------------------------------
`timescale 1 ns / 1 ns
//altera message_off 10036
module altera_avalon_sc_fifo
#(
// --------------------------------------------------
// Parameters
// --------------------------------------------------
parameter SYMBOLS_PER_BEAT = 1,
parameter BITS_PER_SYMBOL = 8,
parameter FIFO_DEPTH = 16,
parameter CHANNEL_WIDTH = 0,
parameter ERROR_WIDTH = 0,
parameter USE_PACKETS = 0,
parameter USE_FILL_LEVEL = 0,
parameter USE_STORE_FORWARD = 0,
parameter USE_ALMOST_FULL_IF = 0,
parameter USE_ALMOST_EMPTY_IF = 0,
// --------------------------------------------------
// Empty latency is defined as the number of cycles
// required for a write to deassert the empty flag.
// For example, a latency of 1 means that the empty
// flag is deasserted on the cycle after a write.
//
// Another way to think of it is the latency for a
// write to propagate to the output.
//
// An empty latency of 0 implies lookahead, which is
// only implemented for the register-based FIFO.
// --------------------------------------------------
parameter EMPTY_LATENCY = 3,
parameter USE_MEMORY_BLOCKS = 1,
// --------------------------------------------------
// Internal Parameters
// --------------------------------------------------
parameter DATA_WIDTH = SYMBOLS_PER_BEAT * BITS_PER_SYMBOL,
parameter EMPTY_WIDTH = log2ceil(SYMBOLS_PER_BEAT)
)
(
// --------------------------------------------------
// Ports
// --------------------------------------------------
input clk,
input reset,
input [DATA_WIDTH-1: 0] in_data,
input in_valid,
input in_startofpacket,
input in_endofpacket,
input [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] in_empty,
input [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] in_error,
input [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] in_channel,
output in_ready,
output [DATA_WIDTH-1 : 0] out_data,
output reg out_valid,
output out_startofpacket,
output out_endofpacket,
output [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] out_empty,
output [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] out_error,
output [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] out_channel,
input out_ready,
input [(USE_STORE_FORWARD ? 2 : 1) : 0] csr_address,
input csr_write,
input csr_read,
input [31 : 0] csr_writedata,
output reg [31 : 0] csr_readdata,
output wire almost_full_data,
output wire almost_empty_data
);
// --------------------------------------------------
// Local Parameters
// --------------------------------------------------
localparam ADDR_WIDTH = log2ceil(FIFO_DEPTH);
localparam DEPTH = FIFO_DEPTH;
localparam PKT_SIGNALS_WIDTH = 2 + EMPTY_WIDTH;
localparam PAYLOAD_WIDTH = (USE_PACKETS == 1) ?
2 + EMPTY_WIDTH + DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH:
DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH;
// --------------------------------------------------
// Internal Signals
// --------------------------------------------------
genvar i;
reg [PAYLOAD_WIDTH-1 : 0] mem [DEPTH-1 : 0];
reg [ADDR_WIDTH-1 : 0] wr_ptr;
reg [ADDR_WIDTH-1 : 0] rd_ptr;
reg [DEPTH-1 : 0] mem_used;
wire [ADDR_WIDTH-1 : 0] next_wr_ptr;
wire [ADDR_WIDTH-1 : 0] next_rd_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_wr_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_rd_ptr;
wire [ADDR_WIDTH-1 : 0] mem_rd_ptr;
wire read;
wire write;
reg empty;
reg next_empty;
reg full;
reg next_full;
wire [PKT_SIGNALS_WIDTH-1 : 0] in_packet_signals;
wire [PKT_SIGNALS_WIDTH-1 : 0] out_packet_signals;
wire [PAYLOAD_WIDTH-1 : 0] in_payload;
reg [PAYLOAD_WIDTH-1 : 0] internal_out_payload;
reg [PAYLOAD_WIDTH-1 : 0] out_payload;
reg internal_out_valid;
wire internal_out_ready;
reg [ADDR_WIDTH : 0] fifo_fill_level;
reg [ADDR_WIDTH : 0] fill_level;
reg [ADDR_WIDTH-1 : 0] sop_ptr = 0;
wire [ADDR_WIDTH-1 : 0] curr_sop_ptr;
reg [23:0] almost_full_threshold;
reg [23:0] almost_empty_threshold;
reg [23:0] cut_through_threshold;
reg [15:0] pkt_cnt;
reg drop_on_error_en;
reg error_in_pkt;
reg pkt_has_started;
reg sop_has_left_fifo;
reg fifo_too_small_r;
reg pkt_cnt_eq_zero;
reg pkt_cnt_eq_one;
wire wait_for_threshold;
reg pkt_mode;
wire wait_for_pkt;
wire ok_to_forward;
wire in_pkt_eop_arrive;
wire out_pkt_leave;
wire in_pkt_start;
wire in_pkt_error;
wire drop_on_error;
wire fifo_too_small;
wire out_pkt_sop_leave;
wire [31:0] max_fifo_size;
reg fifo_fill_level_lt_cut_through_threshold;
// --------------------------------------------------
// Define Payload
//
// Icky part where we decide which signals form the
// payload to the FIFO with generate blocks.
// --------------------------------------------------
generate
if (EMPTY_WIDTH > 0) begin : gen_blk1
assign in_packet_signals = {in_startofpacket, in_endofpacket, in_empty};
assign {out_startofpacket, out_endofpacket, out_empty} = out_packet_signals;
end
else begin : gen_blk1_else
assign out_empty = in_error;
assign in_packet_signals = {in_startofpacket, in_endofpacket};
assign {out_startofpacket, out_endofpacket} = out_packet_signals;
end
endgenerate
generate
if (USE_PACKETS) begin : gen_blk2
if (ERROR_WIDTH > 0) begin : gen_blk3
if (CHANNEL_WIDTH > 0) begin : gen_blk4
assign in_payload = {in_packet_signals, in_data, in_error, in_channel};
assign {out_packet_signals, out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk4_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data, in_error};
assign {out_packet_signals, out_data, out_error} = out_payload;
end
end
else begin : gen_blk3_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk5
assign in_payload = {in_packet_signals, in_data, in_channel};
assign {out_packet_signals, out_data, out_channel} = out_payload;
end
else begin : gen_blk5_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data};
assign {out_packet_signals, out_data} = out_payload;
end
end
end
else begin : gen_blk2_else
assign out_packet_signals = 0;
if (ERROR_WIDTH > 0) begin : gen_blk6
if (CHANNEL_WIDTH > 0) begin : gen_blk7
assign in_payload = {in_data, in_error, in_channel};
assign {out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk7_else
assign out_channel = in_channel;
assign in_payload = {in_data, in_error};
assign {out_data, out_error} = out_payload;
end
end
else begin : gen_blk6_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk8
assign in_payload = {in_data, in_channel};
assign {out_data, out_channel} = out_payload;
end
else begin : gen_blk8_else
assign out_channel = in_channel;
assign in_payload = in_data;
assign out_data = out_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Memory-based FIFO storage
//
// To allow a ready latency of 0, the read index is
// obtained from the next read pointer and memory
// outputs are unregistered.
//
// If the empty latency is 1, we infer bypass logic
// around the memory so writes propagate to the
// outputs on the next cycle.
//
// Do not change the way this is coded: Quartus needs
// a perfect match to the template, and any attempt to
// refactor the two always blocks into one will break
// memory inference.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk9
if (EMPTY_LATENCY == 1) begin : gen_blk10
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] = in_payload;
internal_out_payload = mem[mem_rd_ptr];
end
end else begin : gen_blk10_else
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] <= in_payload;
internal_out_payload <= mem[mem_rd_ptr];
end
end
assign mem_rd_ptr = next_rd_ptr;
end else begin : gen_blk9_else
// --------------------------------------------------
// Register-based FIFO storage
//
// Uses a shift register as the storage element. Each
// shift register slot has a bit which indicates if
// the slot is occupied (credit to Sam H for the idea).
// The occupancy bits are contiguous and start from the
// lsb, so 0000, 0001, 0011, 0111, 1111 for a 4-deep
// FIFO.
//
// Each slot is enabled during a read or when it
// is unoccupied. New data is always written to every
// going-to-be-empty slot (we keep track of which ones
// are actually useful with the occupancy bits). On a
// read we shift occupied slots.
//
// The exception is the last slot, which always gets
// new data when it is unoccupied.
// --------------------------------------------------
for (i = 0; i < DEPTH-1; i = i + 1) begin : shift_reg
always @(posedge clk or posedge reset) begin
if (reset) begin
mem[i] <= 0;
end
else if (read || !mem_used[i]) begin
if (!mem_used[i+1])
mem[i] <= in_payload;
else
mem[i] <= mem[i+1];
end
end
end
always @(posedge clk, posedge reset) begin
if (reset) begin
mem[DEPTH-1] <= 0;
end
else begin
if (DEPTH == 1) begin
if (write)
mem[DEPTH-1] <= in_payload;
end
else if (!mem_used[DEPTH-1])
mem[DEPTH-1] <= in_payload;
end
end
end
endgenerate
assign read = internal_out_ready && internal_out_valid && ok_to_forward;
assign write = in_ready && in_valid;
// --------------------------------------------------
// Pointer Management
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk11
assign incremented_wr_ptr = wr_ptr + 1'b1;
assign incremented_rd_ptr = rd_ptr + 1'b1;
assign next_wr_ptr = drop_on_error ? curr_sop_ptr : write ? incremented_wr_ptr : wr_ptr;
assign next_rd_ptr = (read) ? incremented_rd_ptr : rd_ptr;
always @(posedge clk or posedge reset) begin
if (reset) begin
wr_ptr <= 0;
rd_ptr <= 0;
end
else begin
wr_ptr <= next_wr_ptr;
rd_ptr <= next_rd_ptr;
end
end
end else begin : gen_blk11_else
// --------------------------------------------------
// Shift Register Occupancy Bits
//
// Consider a 4-deep FIFO with 2 entries: 0011
// On a read and write, do not modify the bits.
// On a write, left-shift the bits to get 0111.
// On a read, right-shift the bits to get 0001.
//
// Also, on a write we set bit0 (the head), while
// clearing the tail on a read.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[0] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[0] <= 1;
else if (read) begin
if (DEPTH > 1)
mem_used[0] <= mem_used[1];
else
mem_used[0] <= 0;
end
end
end
end
if (DEPTH > 1) begin : gen_blk12
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[DEPTH-1] <= 0;
end
else begin
if (write ^ read) begin
mem_used[DEPTH-1] <= 0;
if (write)
mem_used[DEPTH-1] <= mem_used[DEPTH-2];
end
end
end
end
for (i = 1; i < DEPTH-1; i = i + 1) begin : storage_logic
always @(posedge clk, posedge reset) begin
if (reset) begin
mem_used[i] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[i] <= mem_used[i-1];
else if (read)
mem_used[i] <= mem_used[i+1];
end
end
end
end
end
endgenerate
// --------------------------------------------------
// Memory FIFO Status Management
//
// Generates the full and empty signals from the
// pointers. The FIFO is full when the next write
// pointer will be equal to the read pointer after
// a write. Reading from a FIFO clears full.
//
// The FIFO is empty when the next read pointer will
// be equal to the write pointer after a read. Writing
// to a FIFO clears empty.
//
// A simultaneous read and write must not change any of
// the empty or full flags unless there is a drop on error event.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk13
always @* begin
next_full = full;
next_empty = empty;
if (read && !write) begin
next_full = 1'b0;
if (incremented_rd_ptr == wr_ptr)
next_empty = 1'b1;
end
if (write && !read) begin
if (!drop_on_error)
next_empty = 1'b0;
else if (curr_sop_ptr == rd_ptr) // drop on error and only 1 pkt in fifo
next_empty = 1'b1;
if (incremented_wr_ptr == rd_ptr && !drop_on_error)
next_full = 1'b1;
end
if (write && read && drop_on_error) begin
if (curr_sop_ptr == next_rd_ptr)
next_empty = 1'b1;
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
empty <= 1;
full <= 0;
end
else begin
empty <= next_empty;
full <= next_full;
end
end
end else begin : gen_blk13_else
// --------------------------------------------------
// Register FIFO Status Management
//
// Full when the tail occupancy bit is 1. Empty when
// the head occupancy bit is 0.
// --------------------------------------------------
always @* begin
full = mem_used[DEPTH-1];
empty = !mem_used[0];
// ------------------------------------------
// For a single slot FIFO, reading clears the
// full status immediately.
// ------------------------------------------
if (DEPTH == 1)
full = mem_used[0] && !read;
internal_out_payload = mem[0];
// ------------------------------------------
// Writes clear empty immediately for lookahead modes.
// Note that we use in_valid instead of write to avoid
// combinational loops (in lookahead mode, qualifying
// with in_ready is meaningless).
//
// In a 1-deep FIFO, a possible combinational loop runs
// from write -> out_valid -> out_ready -> write
// ------------------------------------------
if (EMPTY_LATENCY == 0) begin
empty = !mem_used[0] && !in_valid;
if (!mem_used[0] && in_valid)
internal_out_payload = in_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Avalon-ST Signals
//
// The in_ready signal is straightforward.
//
// To match memory latency when empty latency > 1,
// out_valid assertions must be delayed by one clock
// cycle.
//
// Note: out_valid deassertions must not be delayed or
// the FIFO will underflow.
// --------------------------------------------------
assign in_ready = !full;
assign internal_out_ready = out_ready || !out_valid;
generate if (EMPTY_LATENCY > 1) begin : gen_blk14
always @(posedge clk or posedge reset) begin
if (reset)
internal_out_valid <= 0;
else begin
internal_out_valid <= !empty & ok_to_forward & ~drop_on_error;
if (read) begin
if (incremented_rd_ptr == wr_ptr)
internal_out_valid <= 1'b0;
end
end
end
end else begin : gen_blk14_else
always @* begin
internal_out_valid = !empty & ok_to_forward;
end
end
endgenerate
// --------------------------------------------------
// Single Output Pipeline Stage
//
// This output pipeline stage is enabled if the FIFO's
// empty latency is set to 3 (default). It is disabled
// for all other allowed latencies.
//
// Reason: The memory outputs are unregistered, so we have to
// register the output or fmax will drop if combinatorial
// logic is present on the output datapath.
//
// Q: The Avalon-ST spec says that I have to register my outputs
// But isn't the memory counted as a register?
// A: The path from the address lookup to the memory output is
// slow. Registering the memory outputs is a good idea.
//
// The registers get packed into the memory by the fitter
// which means minimal resources are consumed (the result
// is a altsyncram with registered outputs, available on
// all modern Altera devices).
//
// This output stage acts as an extra slot in the FIFO,
// and complicates the fill level.
// --------------------------------------------------
generate if (EMPTY_LATENCY == 3) begin : gen_blk15
always @(posedge clk or posedge reset) begin
if (reset) begin
out_valid <= 0;
out_payload <= 0;
end
else begin
if (internal_out_ready) begin
out_valid <= internal_out_valid & ok_to_forward;
out_payload <= internal_out_payload;
end
end
end
end
else begin : gen_blk15_else
always @* begin
out_valid = internal_out_valid;
out_payload = internal_out_payload;
end
end
endgenerate
// --------------------------------------------------
// Fill Level
//
// The fill level is calculated from the next write
// and read pointers to avoid unnecessary latency
// and logic.
//
// However, if the store-and-forward mode of the FIFO
// is enabled, the fill level is an up-down counter
// for fmax optimization reasons.
//
// If the output pipeline is enabled, the fill level
// must account for it, or we'll always be off by one.
// This may, or may not be important depending on the
// application.
//
// For now, we'll always calculate the exact fill level
// at the cost of an extra adder when the output stage
// is enabled.
// --------------------------------------------------
generate if (USE_FILL_LEVEL) begin : gen_blk16
wire [31:0] depth32;
assign depth32 = DEPTH;
if (USE_STORE_FORWARD) begin
reg [ADDR_WIDTH : 0] curr_packet_len_less_one;
// --------------------------------------------------
// We only drop on endofpacket. As long as we don't add to the fill
// level on the dropped endofpacket cycle, we can simply subtract
// (packet length - 1) from the fill level for dropped packets.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
curr_packet_len_less_one <= 0;
end else begin
if (write) begin
curr_packet_len_less_one <= curr_packet_len_less_one + 1'b1;
if (in_endofpacket)
curr_packet_len_less_one <= 0;
end
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
fifo_fill_level <= 0;
end else if (drop_on_error) begin
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one;
if (read)
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one - 1'b1;
end else if (write && !read) begin
fifo_fill_level <= fifo_fill_level + 1'b1;
end else if (read && !write) begin
fifo_fill_level <= fifo_fill_level - 1'b1;
end
end
end else begin
always @(posedge clk or posedge reset) begin
if (reset)
fifo_fill_level <= 0;
else if (next_full & !drop_on_error)
fifo_fill_level <= depth32[ADDR_WIDTH:0];
else begin
fifo_fill_level[ADDR_WIDTH] <= 1'b0;
fifo_fill_level[ADDR_WIDTH-1 : 0] <= next_wr_ptr - next_rd_ptr;
end
end
end
always @* begin
fill_level = fifo_fill_level;
if (EMPTY_LATENCY == 3)
fill_level = fifo_fill_level + {{ADDR_WIDTH{1'b0}}, out_valid};
end
end
else begin : gen_blk16_else
always @* begin
fill_level = 0;
end
end
endgenerate
generate if (USE_ALMOST_FULL_IF) begin : gen_blk17
assign almost_full_data = (fill_level >= almost_full_threshold);
end
else
assign almost_full_data = 0;
endgenerate
generate if (USE_ALMOST_EMPTY_IF) begin : gen_blk18
assign almost_empty_data = (fill_level <= almost_empty_threshold);
end
else
assign almost_empty_data = 0;
endgenerate
// --------------------------------------------------
// Avalon-MM Status & Control Connection Point
//
// Register map:
//
// | Addr | RW | 31 - 0 |
// | 0 | R | Fill level |
//
// The registering of this connection point means
// that there is a cycle of latency between
// reads/writes and the updating of the fill level.
// --------------------------------------------------
generate if (USE_STORE_FORWARD) begin : gen_blk19
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
cut_through_threshold <= 0;
drop_on_error_en <= 0;
csr_readdata <= 0;
pkt_mode <= 1'b1;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 5)
csr_readdata <= {31'b0, drop_on_error_en};
else if (csr_address == 4)
csr_readdata <= {8'b0, cut_through_threshold};
else if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b101)
drop_on_error_en <= csr_writedata[0];
else if(csr_address == 3'b100) begin
cut_through_threshold <= csr_writedata[23:0];
pkt_mode <= (csr_writedata[23:0] == 0);
end
else if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else if (USE_ALMOST_FULL_IF || USE_ALMOST_EMPTY_IF) begin : gen_blk19_else1
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
csr_readdata <= 0;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else begin : gen_blk19_else2
always @(posedge clk or posedge reset) begin
if (reset) begin
csr_readdata <= 0;
end
else if (csr_read) begin
csr_readdata <= 0;
if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
end
end
endgenerate
// --------------------------------------------------
// Store and forward logic
// --------------------------------------------------
// if the fifo gets full before the entire packet or the
// cut-threshold condition is met then start sending out
// data in order to avoid dead-lock situation
generate if (USE_STORE_FORWARD) begin : gen_blk20
assign wait_for_threshold = (fifo_fill_level_lt_cut_through_threshold) & wait_for_pkt ;
assign wait_for_pkt = pkt_cnt_eq_zero | (pkt_cnt_eq_one & out_pkt_leave);
assign ok_to_forward = (pkt_mode ? (~wait_for_pkt | ~pkt_has_started) :
~wait_for_threshold) | fifo_too_small_r;
assign in_pkt_eop_arrive = in_valid & in_ready & in_endofpacket;
assign in_pkt_start = in_valid & in_ready & in_startofpacket;
assign in_pkt_error = in_valid & in_ready & |in_error;
assign out_pkt_sop_leave = out_valid & out_ready & out_startofpacket;
assign out_pkt_leave = out_valid & out_ready & out_endofpacket;
assign fifo_too_small = (pkt_mode ? wait_for_pkt : wait_for_threshold) & full & out_ready;
// count packets coming and going into the fifo
always @(posedge clk or posedge reset) begin
if (reset) begin
pkt_cnt <= 0;
pkt_has_started <= 0;
sop_has_left_fifo <= 0;
fifo_too_small_r <= 0;
pkt_cnt_eq_zero <= 1'b1;
pkt_cnt_eq_one <= 1'b0;
fifo_fill_level_lt_cut_through_threshold <= 1'b1;
end
else begin
fifo_fill_level_lt_cut_through_threshold <= fifo_fill_level < cut_through_threshold;
fifo_too_small_r <= fifo_too_small;
if( in_pkt_eop_arrive )
sop_has_left_fifo <= 1'b0;
else if (out_pkt_sop_leave & pkt_cnt_eq_zero )
sop_has_left_fifo <= 1'b1;
if (in_pkt_eop_arrive & ~out_pkt_leave & ~drop_on_error ) begin
pkt_cnt <= pkt_cnt + 1'b1;
pkt_cnt_eq_zero <= 0;
if (pkt_cnt == 0)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
else if((~in_pkt_eop_arrive | drop_on_error) & out_pkt_leave) begin
pkt_cnt <= pkt_cnt - 1'b1;
if (pkt_cnt == 1)
pkt_cnt_eq_zero <= 1'b1;
else
pkt_cnt_eq_zero <= 1'b0;
if (pkt_cnt == 2)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
if (in_pkt_start)
pkt_has_started <= 1'b1;
else if (in_pkt_eop_arrive)
pkt_has_started <= 1'b0;
end
end
// drop on error logic
always @(posedge clk or posedge reset) begin
if (reset) begin
sop_ptr <= 0;
error_in_pkt <= 0;
end
else begin
// save the location of the SOP
if ( in_pkt_start )
sop_ptr <= wr_ptr;
// remember if error in pkt
// log error only if packet has already started
if (in_pkt_eop_arrive)
error_in_pkt <= 1'b0;
else if ( in_pkt_error & (pkt_has_started | in_pkt_start))
error_in_pkt <= 1'b1;
end
end
assign drop_on_error = drop_on_error_en & (error_in_pkt | in_pkt_error) & in_pkt_eop_arrive &
~sop_has_left_fifo & ~(out_pkt_sop_leave & pkt_cnt_eq_zero);
assign curr_sop_ptr = (write && in_startofpacket && in_endofpacket) ? wr_ptr : sop_ptr;
end
else begin : gen_blk20_else
assign ok_to_forward = 1'b1;
assign drop_on_error = 1'b0;
if (ADDR_WIDTH <= 1)
assign curr_sop_ptr = 1'b0;
else
assign curr_sop_ptr = {ADDR_WIDTH - 1 { 1'b0 }};
end
endgenerate
// --------------------------------------------------
// Calculates the log2ceil of the input value
// --------------------------------------------------
function integer log2ceil;
input integer val;
reg[31:0] i;
begin
i = 1;
log2ceil = 0;
while (i < val) begin
log2ceil = log2ceil + 1;
i = i[30:0] << 1;
end
end
endfunction
endmodule
|
// -----------------------------------------------------------
// Legal Notice: (C)2007 Altera Corporation. All rights reserved. Your
// use of Altera Corporation's design tools, logic functions and other
// software and tools, and its AMPP partner logic functions, and any
// output files any of the foregoing (including device programming or
// simulation files), and any associated documentation or information are
// expressly subject to the terms and conditions of the Altera Program
// License Subscription Agreement or other applicable license agreement,
// including, without limitation, that your use is for the sole purpose
// of programming logic devices manufactured by Altera and sold by Altera
// or its authorized distributors. Please refer to the applicable
// agreement for further details.
//
// Description: Single clock Avalon-ST FIFO.
// -----------------------------------------------------------
`timescale 1 ns / 1 ns
//altera message_off 10036
module altera_avalon_sc_fifo
#(
// --------------------------------------------------
// Parameters
// --------------------------------------------------
parameter SYMBOLS_PER_BEAT = 1,
parameter BITS_PER_SYMBOL = 8,
parameter FIFO_DEPTH = 16,
parameter CHANNEL_WIDTH = 0,
parameter ERROR_WIDTH = 0,
parameter USE_PACKETS = 0,
parameter USE_FILL_LEVEL = 0,
parameter USE_STORE_FORWARD = 0,
parameter USE_ALMOST_FULL_IF = 0,
parameter USE_ALMOST_EMPTY_IF = 0,
// --------------------------------------------------
// Empty latency is defined as the number of cycles
// required for a write to deassert the empty flag.
// For example, a latency of 1 means that the empty
// flag is deasserted on the cycle after a write.
//
// Another way to think of it is the latency for a
// write to propagate to the output.
//
// An empty latency of 0 implies lookahead, which is
// only implemented for the register-based FIFO.
// --------------------------------------------------
parameter EMPTY_LATENCY = 3,
parameter USE_MEMORY_BLOCKS = 1,
// --------------------------------------------------
// Internal Parameters
// --------------------------------------------------
parameter DATA_WIDTH = SYMBOLS_PER_BEAT * BITS_PER_SYMBOL,
parameter EMPTY_WIDTH = log2ceil(SYMBOLS_PER_BEAT)
)
(
// --------------------------------------------------
// Ports
// --------------------------------------------------
input clk,
input reset,
input [DATA_WIDTH-1: 0] in_data,
input in_valid,
input in_startofpacket,
input in_endofpacket,
input [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] in_empty,
input [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] in_error,
input [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] in_channel,
output in_ready,
output [DATA_WIDTH-1 : 0] out_data,
output reg out_valid,
output out_startofpacket,
output out_endofpacket,
output [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] out_empty,
output [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] out_error,
output [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] out_channel,
input out_ready,
input [(USE_STORE_FORWARD ? 2 : 1) : 0] csr_address,
input csr_write,
input csr_read,
input [31 : 0] csr_writedata,
output reg [31 : 0] csr_readdata,
output wire almost_full_data,
output wire almost_empty_data
);
// --------------------------------------------------
// Local Parameters
// --------------------------------------------------
localparam ADDR_WIDTH = log2ceil(FIFO_DEPTH);
localparam DEPTH = FIFO_DEPTH;
localparam PKT_SIGNALS_WIDTH = 2 + EMPTY_WIDTH;
localparam PAYLOAD_WIDTH = (USE_PACKETS == 1) ?
2 + EMPTY_WIDTH + DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH:
DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH;
// --------------------------------------------------
// Internal Signals
// --------------------------------------------------
genvar i;
reg [PAYLOAD_WIDTH-1 : 0] mem [DEPTH-1 : 0];
reg [ADDR_WIDTH-1 : 0] wr_ptr;
reg [ADDR_WIDTH-1 : 0] rd_ptr;
reg [DEPTH-1 : 0] mem_used;
wire [ADDR_WIDTH-1 : 0] next_wr_ptr;
wire [ADDR_WIDTH-1 : 0] next_rd_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_wr_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_rd_ptr;
wire [ADDR_WIDTH-1 : 0] mem_rd_ptr;
wire read;
wire write;
reg empty;
reg next_empty;
reg full;
reg next_full;
wire [PKT_SIGNALS_WIDTH-1 : 0] in_packet_signals;
wire [PKT_SIGNALS_WIDTH-1 : 0] out_packet_signals;
wire [PAYLOAD_WIDTH-1 : 0] in_payload;
reg [PAYLOAD_WIDTH-1 : 0] internal_out_payload;
reg [PAYLOAD_WIDTH-1 : 0] out_payload;
reg internal_out_valid;
wire internal_out_ready;
reg [ADDR_WIDTH : 0] fifo_fill_level;
reg [ADDR_WIDTH : 0] fill_level;
reg [ADDR_WIDTH-1 : 0] sop_ptr = 0;
wire [ADDR_WIDTH-1 : 0] curr_sop_ptr;
reg [23:0] almost_full_threshold;
reg [23:0] almost_empty_threshold;
reg [23:0] cut_through_threshold;
reg [15:0] pkt_cnt;
reg drop_on_error_en;
reg error_in_pkt;
reg pkt_has_started;
reg sop_has_left_fifo;
reg fifo_too_small_r;
reg pkt_cnt_eq_zero;
reg pkt_cnt_eq_one;
wire wait_for_threshold;
reg pkt_mode;
wire wait_for_pkt;
wire ok_to_forward;
wire in_pkt_eop_arrive;
wire out_pkt_leave;
wire in_pkt_start;
wire in_pkt_error;
wire drop_on_error;
wire fifo_too_small;
wire out_pkt_sop_leave;
wire [31:0] max_fifo_size;
reg fifo_fill_level_lt_cut_through_threshold;
// --------------------------------------------------
// Define Payload
//
// Icky part where we decide which signals form the
// payload to the FIFO with generate blocks.
// --------------------------------------------------
generate
if (EMPTY_WIDTH > 0) begin : gen_blk1
assign in_packet_signals = {in_startofpacket, in_endofpacket, in_empty};
assign {out_startofpacket, out_endofpacket, out_empty} = out_packet_signals;
end
else begin : gen_blk1_else
assign out_empty = in_error;
assign in_packet_signals = {in_startofpacket, in_endofpacket};
assign {out_startofpacket, out_endofpacket} = out_packet_signals;
end
endgenerate
generate
if (USE_PACKETS) begin : gen_blk2
if (ERROR_WIDTH > 0) begin : gen_blk3
if (CHANNEL_WIDTH > 0) begin : gen_blk4
assign in_payload = {in_packet_signals, in_data, in_error, in_channel};
assign {out_packet_signals, out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk4_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data, in_error};
assign {out_packet_signals, out_data, out_error} = out_payload;
end
end
else begin : gen_blk3_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk5
assign in_payload = {in_packet_signals, in_data, in_channel};
assign {out_packet_signals, out_data, out_channel} = out_payload;
end
else begin : gen_blk5_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data};
assign {out_packet_signals, out_data} = out_payload;
end
end
end
else begin : gen_blk2_else
assign out_packet_signals = 0;
if (ERROR_WIDTH > 0) begin : gen_blk6
if (CHANNEL_WIDTH > 0) begin : gen_blk7
assign in_payload = {in_data, in_error, in_channel};
assign {out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk7_else
assign out_channel = in_channel;
assign in_payload = {in_data, in_error};
assign {out_data, out_error} = out_payload;
end
end
else begin : gen_blk6_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk8
assign in_payload = {in_data, in_channel};
assign {out_data, out_channel} = out_payload;
end
else begin : gen_blk8_else
assign out_channel = in_channel;
assign in_payload = in_data;
assign out_data = out_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Memory-based FIFO storage
//
// To allow a ready latency of 0, the read index is
// obtained from the next read pointer and memory
// outputs are unregistered.
//
// If the empty latency is 1, we infer bypass logic
// around the memory so writes propagate to the
// outputs on the next cycle.
//
// Do not change the way this is coded: Quartus needs
// a perfect match to the template, and any attempt to
// refactor the two always blocks into one will break
// memory inference.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk9
if (EMPTY_LATENCY == 1) begin : gen_blk10
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] = in_payload;
internal_out_payload = mem[mem_rd_ptr];
end
end else begin : gen_blk10_else
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] <= in_payload;
internal_out_payload <= mem[mem_rd_ptr];
end
end
assign mem_rd_ptr = next_rd_ptr;
end else begin : gen_blk9_else
// --------------------------------------------------
// Register-based FIFO storage
//
// Uses a shift register as the storage element. Each
// shift register slot has a bit which indicates if
// the slot is occupied (credit to Sam H for the idea).
// The occupancy bits are contiguous and start from the
// lsb, so 0000, 0001, 0011, 0111, 1111 for a 4-deep
// FIFO.
//
// Each slot is enabled during a read or when it
// is unoccupied. New data is always written to every
// going-to-be-empty slot (we keep track of which ones
// are actually useful with the occupancy bits). On a
// read we shift occupied slots.
//
// The exception is the last slot, which always gets
// new data when it is unoccupied.
// --------------------------------------------------
for (i = 0; i < DEPTH-1; i = i + 1) begin : shift_reg
always @(posedge clk or posedge reset) begin
if (reset) begin
mem[i] <= 0;
end
else if (read || !mem_used[i]) begin
if (!mem_used[i+1])
mem[i] <= in_payload;
else
mem[i] <= mem[i+1];
end
end
end
always @(posedge clk, posedge reset) begin
if (reset) begin
mem[DEPTH-1] <= 0;
end
else begin
if (DEPTH == 1) begin
if (write)
mem[DEPTH-1] <= in_payload;
end
else if (!mem_used[DEPTH-1])
mem[DEPTH-1] <= in_payload;
end
end
end
endgenerate
assign read = internal_out_ready && internal_out_valid && ok_to_forward;
assign write = in_ready && in_valid;
// --------------------------------------------------
// Pointer Management
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk11
assign incremented_wr_ptr = wr_ptr + 1'b1;
assign incremented_rd_ptr = rd_ptr + 1'b1;
assign next_wr_ptr = drop_on_error ? curr_sop_ptr : write ? incremented_wr_ptr : wr_ptr;
assign next_rd_ptr = (read) ? incremented_rd_ptr : rd_ptr;
always @(posedge clk or posedge reset) begin
if (reset) begin
wr_ptr <= 0;
rd_ptr <= 0;
end
else begin
wr_ptr <= next_wr_ptr;
rd_ptr <= next_rd_ptr;
end
end
end else begin : gen_blk11_else
// --------------------------------------------------
// Shift Register Occupancy Bits
//
// Consider a 4-deep FIFO with 2 entries: 0011
// On a read and write, do not modify the bits.
// On a write, left-shift the bits to get 0111.
// On a read, right-shift the bits to get 0001.
//
// Also, on a write we set bit0 (the head), while
// clearing the tail on a read.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[0] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[0] <= 1;
else if (read) begin
if (DEPTH > 1)
mem_used[0] <= mem_used[1];
else
mem_used[0] <= 0;
end
end
end
end
if (DEPTH > 1) begin : gen_blk12
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[DEPTH-1] <= 0;
end
else begin
if (write ^ read) begin
mem_used[DEPTH-1] <= 0;
if (write)
mem_used[DEPTH-1] <= mem_used[DEPTH-2];
end
end
end
end
for (i = 1; i < DEPTH-1; i = i + 1) begin : storage_logic
always @(posedge clk, posedge reset) begin
if (reset) begin
mem_used[i] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[i] <= mem_used[i-1];
else if (read)
mem_used[i] <= mem_used[i+1];
end
end
end
end
end
endgenerate
// --------------------------------------------------
// Memory FIFO Status Management
//
// Generates the full and empty signals from the
// pointers. The FIFO is full when the next write
// pointer will be equal to the read pointer after
// a write. Reading from a FIFO clears full.
//
// The FIFO is empty when the next read pointer will
// be equal to the write pointer after a read. Writing
// to a FIFO clears empty.
//
// A simultaneous read and write must not change any of
// the empty or full flags unless there is a drop on error event.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk13
always @* begin
next_full = full;
next_empty = empty;
if (read && !write) begin
next_full = 1'b0;
if (incremented_rd_ptr == wr_ptr)
next_empty = 1'b1;
end
if (write && !read) begin
if (!drop_on_error)
next_empty = 1'b0;
else if (curr_sop_ptr == rd_ptr) // drop on error and only 1 pkt in fifo
next_empty = 1'b1;
if (incremented_wr_ptr == rd_ptr && !drop_on_error)
next_full = 1'b1;
end
if (write && read && drop_on_error) begin
if (curr_sop_ptr == next_rd_ptr)
next_empty = 1'b1;
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
empty <= 1;
full <= 0;
end
else begin
empty <= next_empty;
full <= next_full;
end
end
end else begin : gen_blk13_else
// --------------------------------------------------
// Register FIFO Status Management
//
// Full when the tail occupancy bit is 1. Empty when
// the head occupancy bit is 0.
// --------------------------------------------------
always @* begin
full = mem_used[DEPTH-1];
empty = !mem_used[0];
// ------------------------------------------
// For a single slot FIFO, reading clears the
// full status immediately.
// ------------------------------------------
if (DEPTH == 1)
full = mem_used[0] && !read;
internal_out_payload = mem[0];
// ------------------------------------------
// Writes clear empty immediately for lookahead modes.
// Note that we use in_valid instead of write to avoid
// combinational loops (in lookahead mode, qualifying
// with in_ready is meaningless).
//
// In a 1-deep FIFO, a possible combinational loop runs
// from write -> out_valid -> out_ready -> write
// ------------------------------------------
if (EMPTY_LATENCY == 0) begin
empty = !mem_used[0] && !in_valid;
if (!mem_used[0] && in_valid)
internal_out_payload = in_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Avalon-ST Signals
//
// The in_ready signal is straightforward.
//
// To match memory latency when empty latency > 1,
// out_valid assertions must be delayed by one clock
// cycle.
//
// Note: out_valid deassertions must not be delayed or
// the FIFO will underflow.
// --------------------------------------------------
assign in_ready = !full;
assign internal_out_ready = out_ready || !out_valid;
generate if (EMPTY_LATENCY > 1) begin : gen_blk14
always @(posedge clk or posedge reset) begin
if (reset)
internal_out_valid <= 0;
else begin
internal_out_valid <= !empty & ok_to_forward & ~drop_on_error;
if (read) begin
if (incremented_rd_ptr == wr_ptr)
internal_out_valid <= 1'b0;
end
end
end
end else begin : gen_blk14_else
always @* begin
internal_out_valid = !empty & ok_to_forward;
end
end
endgenerate
// --------------------------------------------------
// Single Output Pipeline Stage
//
// This output pipeline stage is enabled if the FIFO's
// empty latency is set to 3 (default). It is disabled
// for all other allowed latencies.
//
// Reason: The memory outputs are unregistered, so we have to
// register the output or fmax will drop if combinatorial
// logic is present on the output datapath.
//
// Q: The Avalon-ST spec says that I have to register my outputs
// But isn't the memory counted as a register?
// A: The path from the address lookup to the memory output is
// slow. Registering the memory outputs is a good idea.
//
// The registers get packed into the memory by the fitter
// which means minimal resources are consumed (the result
// is a altsyncram with registered outputs, available on
// all modern Altera devices).
//
// This output stage acts as an extra slot in the FIFO,
// and complicates the fill level.
// --------------------------------------------------
generate if (EMPTY_LATENCY == 3) begin : gen_blk15
always @(posedge clk or posedge reset) begin
if (reset) begin
out_valid <= 0;
out_payload <= 0;
end
else begin
if (internal_out_ready) begin
out_valid <= internal_out_valid & ok_to_forward;
out_payload <= internal_out_payload;
end
end
end
end
else begin : gen_blk15_else
always @* begin
out_valid = internal_out_valid;
out_payload = internal_out_payload;
end
end
endgenerate
// --------------------------------------------------
// Fill Level
//
// The fill level is calculated from the next write
// and read pointers to avoid unnecessary latency
// and logic.
//
// However, if the store-and-forward mode of the FIFO
// is enabled, the fill level is an up-down counter
// for fmax optimization reasons.
//
// If the output pipeline is enabled, the fill level
// must account for it, or we'll always be off by one.
// This may, or may not be important depending on the
// application.
//
// For now, we'll always calculate the exact fill level
// at the cost of an extra adder when the output stage
// is enabled.
// --------------------------------------------------
generate if (USE_FILL_LEVEL) begin : gen_blk16
wire [31:0] depth32;
assign depth32 = DEPTH;
if (USE_STORE_FORWARD) begin
reg [ADDR_WIDTH : 0] curr_packet_len_less_one;
// --------------------------------------------------
// We only drop on endofpacket. As long as we don't add to the fill
// level on the dropped endofpacket cycle, we can simply subtract
// (packet length - 1) from the fill level for dropped packets.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
curr_packet_len_less_one <= 0;
end else begin
if (write) begin
curr_packet_len_less_one <= curr_packet_len_less_one + 1'b1;
if (in_endofpacket)
curr_packet_len_less_one <= 0;
end
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
fifo_fill_level <= 0;
end else if (drop_on_error) begin
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one;
if (read)
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one - 1'b1;
end else if (write && !read) begin
fifo_fill_level <= fifo_fill_level + 1'b1;
end else if (read && !write) begin
fifo_fill_level <= fifo_fill_level - 1'b1;
end
end
end else begin
always @(posedge clk or posedge reset) begin
if (reset)
fifo_fill_level <= 0;
else if (next_full & !drop_on_error)
fifo_fill_level <= depth32[ADDR_WIDTH:0];
else begin
fifo_fill_level[ADDR_WIDTH] <= 1'b0;
fifo_fill_level[ADDR_WIDTH-1 : 0] <= next_wr_ptr - next_rd_ptr;
end
end
end
always @* begin
fill_level = fifo_fill_level;
if (EMPTY_LATENCY == 3)
fill_level = fifo_fill_level + {{ADDR_WIDTH{1'b0}}, out_valid};
end
end
else begin : gen_blk16_else
always @* begin
fill_level = 0;
end
end
endgenerate
generate if (USE_ALMOST_FULL_IF) begin : gen_blk17
assign almost_full_data = (fill_level >= almost_full_threshold);
end
else
assign almost_full_data = 0;
endgenerate
generate if (USE_ALMOST_EMPTY_IF) begin : gen_blk18
assign almost_empty_data = (fill_level <= almost_empty_threshold);
end
else
assign almost_empty_data = 0;
endgenerate
// --------------------------------------------------
// Avalon-MM Status & Control Connection Point
//
// Register map:
//
// | Addr | RW | 31 - 0 |
// | 0 | R | Fill level |
//
// The registering of this connection point means
// that there is a cycle of latency between
// reads/writes and the updating of the fill level.
// --------------------------------------------------
generate if (USE_STORE_FORWARD) begin : gen_blk19
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
cut_through_threshold <= 0;
drop_on_error_en <= 0;
csr_readdata <= 0;
pkt_mode <= 1'b1;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 5)
csr_readdata <= {31'b0, drop_on_error_en};
else if (csr_address == 4)
csr_readdata <= {8'b0, cut_through_threshold};
else if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b101)
drop_on_error_en <= csr_writedata[0];
else if(csr_address == 3'b100) begin
cut_through_threshold <= csr_writedata[23:0];
pkt_mode <= (csr_writedata[23:0] == 0);
end
else if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else if (USE_ALMOST_FULL_IF || USE_ALMOST_EMPTY_IF) begin : gen_blk19_else1
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
csr_readdata <= 0;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else begin : gen_blk19_else2
always @(posedge clk or posedge reset) begin
if (reset) begin
csr_readdata <= 0;
end
else if (csr_read) begin
csr_readdata <= 0;
if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
end
end
endgenerate
// --------------------------------------------------
// Store and forward logic
// --------------------------------------------------
// if the fifo gets full before the entire packet or the
// cut-threshold condition is met then start sending out
// data in order to avoid dead-lock situation
generate if (USE_STORE_FORWARD) begin : gen_blk20
assign wait_for_threshold = (fifo_fill_level_lt_cut_through_threshold) & wait_for_pkt ;
assign wait_for_pkt = pkt_cnt_eq_zero | (pkt_cnt_eq_one & out_pkt_leave);
assign ok_to_forward = (pkt_mode ? (~wait_for_pkt | ~pkt_has_started) :
~wait_for_threshold) | fifo_too_small_r;
assign in_pkt_eop_arrive = in_valid & in_ready & in_endofpacket;
assign in_pkt_start = in_valid & in_ready & in_startofpacket;
assign in_pkt_error = in_valid & in_ready & |in_error;
assign out_pkt_sop_leave = out_valid & out_ready & out_startofpacket;
assign out_pkt_leave = out_valid & out_ready & out_endofpacket;
assign fifo_too_small = (pkt_mode ? wait_for_pkt : wait_for_threshold) & full & out_ready;
// count packets coming and going into the fifo
always @(posedge clk or posedge reset) begin
if (reset) begin
pkt_cnt <= 0;
pkt_has_started <= 0;
sop_has_left_fifo <= 0;
fifo_too_small_r <= 0;
pkt_cnt_eq_zero <= 1'b1;
pkt_cnt_eq_one <= 1'b0;
fifo_fill_level_lt_cut_through_threshold <= 1'b1;
end
else begin
fifo_fill_level_lt_cut_through_threshold <= fifo_fill_level < cut_through_threshold;
fifo_too_small_r <= fifo_too_small;
if( in_pkt_eop_arrive )
sop_has_left_fifo <= 1'b0;
else if (out_pkt_sop_leave & pkt_cnt_eq_zero )
sop_has_left_fifo <= 1'b1;
if (in_pkt_eop_arrive & ~out_pkt_leave & ~drop_on_error ) begin
pkt_cnt <= pkt_cnt + 1'b1;
pkt_cnt_eq_zero <= 0;
if (pkt_cnt == 0)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
else if((~in_pkt_eop_arrive | drop_on_error) & out_pkt_leave) begin
pkt_cnt <= pkt_cnt - 1'b1;
if (pkt_cnt == 1)
pkt_cnt_eq_zero <= 1'b1;
else
pkt_cnt_eq_zero <= 1'b0;
if (pkt_cnt == 2)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
if (in_pkt_start)
pkt_has_started <= 1'b1;
else if (in_pkt_eop_arrive)
pkt_has_started <= 1'b0;
end
end
// drop on error logic
always @(posedge clk or posedge reset) begin
if (reset) begin
sop_ptr <= 0;
error_in_pkt <= 0;
end
else begin
// save the location of the SOP
if ( in_pkt_start )
sop_ptr <= wr_ptr;
// remember if error in pkt
// log error only if packet has already started
if (in_pkt_eop_arrive)
error_in_pkt <= 1'b0;
else if ( in_pkt_error & (pkt_has_started | in_pkt_start))
error_in_pkt <= 1'b1;
end
end
assign drop_on_error = drop_on_error_en & (error_in_pkt | in_pkt_error) & in_pkt_eop_arrive &
~sop_has_left_fifo & ~(out_pkt_sop_leave & pkt_cnt_eq_zero);
assign curr_sop_ptr = (write && in_startofpacket && in_endofpacket) ? wr_ptr : sop_ptr;
end
else begin : gen_blk20_else
assign ok_to_forward = 1'b1;
assign drop_on_error = 1'b0;
if (ADDR_WIDTH <= 1)
assign curr_sop_ptr = 1'b0;
else
assign curr_sop_ptr = {ADDR_WIDTH - 1 { 1'b0 }};
end
endgenerate
// --------------------------------------------------
// Calculates the log2ceil of the input value
// --------------------------------------------------
function integer log2ceil;
input integer val;
reg[31:0] i;
begin
i = 1;
log2ceil = 0;
while (i < val) begin
log2ceil = log2ceil + 1;
i = i[30:0] << 1;
end
end
endfunction
endmodule
|
// -----------------------------------------------------------
// Legal Notice: (C)2007 Altera Corporation. All rights reserved. Your
// use of Altera Corporation's design tools, logic functions and other
// software and tools, and its AMPP partner logic functions, and any
// output files any of the foregoing (including device programming or
// simulation files), and any associated documentation or information are
// expressly subject to the terms and conditions of the Altera Program
// License Subscription Agreement or other applicable license agreement,
// including, without limitation, that your use is for the sole purpose
// of programming logic devices manufactured by Altera and sold by Altera
// or its authorized distributors. Please refer to the applicable
// agreement for further details.
//
// Description: Single clock Avalon-ST FIFO.
// -----------------------------------------------------------
`timescale 1 ns / 1 ns
//altera message_off 10036
module altera_avalon_sc_fifo
#(
// --------------------------------------------------
// Parameters
// --------------------------------------------------
parameter SYMBOLS_PER_BEAT = 1,
parameter BITS_PER_SYMBOL = 8,
parameter FIFO_DEPTH = 16,
parameter CHANNEL_WIDTH = 0,
parameter ERROR_WIDTH = 0,
parameter USE_PACKETS = 0,
parameter USE_FILL_LEVEL = 0,
parameter USE_STORE_FORWARD = 0,
parameter USE_ALMOST_FULL_IF = 0,
parameter USE_ALMOST_EMPTY_IF = 0,
// --------------------------------------------------
// Empty latency is defined as the number of cycles
// required for a write to deassert the empty flag.
// For example, a latency of 1 means that the empty
// flag is deasserted on the cycle after a write.
//
// Another way to think of it is the latency for a
// write to propagate to the output.
//
// An empty latency of 0 implies lookahead, which is
// only implemented for the register-based FIFO.
// --------------------------------------------------
parameter EMPTY_LATENCY = 3,
parameter USE_MEMORY_BLOCKS = 1,
// --------------------------------------------------
// Internal Parameters
// --------------------------------------------------
parameter DATA_WIDTH = SYMBOLS_PER_BEAT * BITS_PER_SYMBOL,
parameter EMPTY_WIDTH = log2ceil(SYMBOLS_PER_BEAT)
)
(
// --------------------------------------------------
// Ports
// --------------------------------------------------
input clk,
input reset,
input [DATA_WIDTH-1: 0] in_data,
input in_valid,
input in_startofpacket,
input in_endofpacket,
input [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] in_empty,
input [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] in_error,
input [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] in_channel,
output in_ready,
output [DATA_WIDTH-1 : 0] out_data,
output reg out_valid,
output out_startofpacket,
output out_endofpacket,
output [((EMPTY_WIDTH>0) ? (EMPTY_WIDTH-1):0) : 0] out_empty,
output [((ERROR_WIDTH>0) ? (ERROR_WIDTH-1):0) : 0] out_error,
output [((CHANNEL_WIDTH>0) ? (CHANNEL_WIDTH-1):0): 0] out_channel,
input out_ready,
input [(USE_STORE_FORWARD ? 2 : 1) : 0] csr_address,
input csr_write,
input csr_read,
input [31 : 0] csr_writedata,
output reg [31 : 0] csr_readdata,
output wire almost_full_data,
output wire almost_empty_data
);
// --------------------------------------------------
// Local Parameters
// --------------------------------------------------
localparam ADDR_WIDTH = log2ceil(FIFO_DEPTH);
localparam DEPTH = FIFO_DEPTH;
localparam PKT_SIGNALS_WIDTH = 2 + EMPTY_WIDTH;
localparam PAYLOAD_WIDTH = (USE_PACKETS == 1) ?
2 + EMPTY_WIDTH + DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH:
DATA_WIDTH + ERROR_WIDTH + CHANNEL_WIDTH;
// --------------------------------------------------
// Internal Signals
// --------------------------------------------------
genvar i;
reg [PAYLOAD_WIDTH-1 : 0] mem [DEPTH-1 : 0];
reg [ADDR_WIDTH-1 : 0] wr_ptr;
reg [ADDR_WIDTH-1 : 0] rd_ptr;
reg [DEPTH-1 : 0] mem_used;
wire [ADDR_WIDTH-1 : 0] next_wr_ptr;
wire [ADDR_WIDTH-1 : 0] next_rd_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_wr_ptr;
wire [ADDR_WIDTH-1 : 0] incremented_rd_ptr;
wire [ADDR_WIDTH-1 : 0] mem_rd_ptr;
wire read;
wire write;
reg empty;
reg next_empty;
reg full;
reg next_full;
wire [PKT_SIGNALS_WIDTH-1 : 0] in_packet_signals;
wire [PKT_SIGNALS_WIDTH-1 : 0] out_packet_signals;
wire [PAYLOAD_WIDTH-1 : 0] in_payload;
reg [PAYLOAD_WIDTH-1 : 0] internal_out_payload;
reg [PAYLOAD_WIDTH-1 : 0] out_payload;
reg internal_out_valid;
wire internal_out_ready;
reg [ADDR_WIDTH : 0] fifo_fill_level;
reg [ADDR_WIDTH : 0] fill_level;
reg [ADDR_WIDTH-1 : 0] sop_ptr = 0;
wire [ADDR_WIDTH-1 : 0] curr_sop_ptr;
reg [23:0] almost_full_threshold;
reg [23:0] almost_empty_threshold;
reg [23:0] cut_through_threshold;
reg [15:0] pkt_cnt;
reg drop_on_error_en;
reg error_in_pkt;
reg pkt_has_started;
reg sop_has_left_fifo;
reg fifo_too_small_r;
reg pkt_cnt_eq_zero;
reg pkt_cnt_eq_one;
wire wait_for_threshold;
reg pkt_mode;
wire wait_for_pkt;
wire ok_to_forward;
wire in_pkt_eop_arrive;
wire out_pkt_leave;
wire in_pkt_start;
wire in_pkt_error;
wire drop_on_error;
wire fifo_too_small;
wire out_pkt_sop_leave;
wire [31:0] max_fifo_size;
reg fifo_fill_level_lt_cut_through_threshold;
// --------------------------------------------------
// Define Payload
//
// Icky part where we decide which signals form the
// payload to the FIFO with generate blocks.
// --------------------------------------------------
generate
if (EMPTY_WIDTH > 0) begin : gen_blk1
assign in_packet_signals = {in_startofpacket, in_endofpacket, in_empty};
assign {out_startofpacket, out_endofpacket, out_empty} = out_packet_signals;
end
else begin : gen_blk1_else
assign out_empty = in_error;
assign in_packet_signals = {in_startofpacket, in_endofpacket};
assign {out_startofpacket, out_endofpacket} = out_packet_signals;
end
endgenerate
generate
if (USE_PACKETS) begin : gen_blk2
if (ERROR_WIDTH > 0) begin : gen_blk3
if (CHANNEL_WIDTH > 0) begin : gen_blk4
assign in_payload = {in_packet_signals, in_data, in_error, in_channel};
assign {out_packet_signals, out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk4_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data, in_error};
assign {out_packet_signals, out_data, out_error} = out_payload;
end
end
else begin : gen_blk3_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk5
assign in_payload = {in_packet_signals, in_data, in_channel};
assign {out_packet_signals, out_data, out_channel} = out_payload;
end
else begin : gen_blk5_else
assign out_channel = in_channel;
assign in_payload = {in_packet_signals, in_data};
assign {out_packet_signals, out_data} = out_payload;
end
end
end
else begin : gen_blk2_else
assign out_packet_signals = 0;
if (ERROR_WIDTH > 0) begin : gen_blk6
if (CHANNEL_WIDTH > 0) begin : gen_blk7
assign in_payload = {in_data, in_error, in_channel};
assign {out_data, out_error, out_channel} = out_payload;
end
else begin : gen_blk7_else
assign out_channel = in_channel;
assign in_payload = {in_data, in_error};
assign {out_data, out_error} = out_payload;
end
end
else begin : gen_blk6_else
assign out_error = in_error;
if (CHANNEL_WIDTH > 0) begin : gen_blk8
assign in_payload = {in_data, in_channel};
assign {out_data, out_channel} = out_payload;
end
else begin : gen_blk8_else
assign out_channel = in_channel;
assign in_payload = in_data;
assign out_data = out_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Memory-based FIFO storage
//
// To allow a ready latency of 0, the read index is
// obtained from the next read pointer and memory
// outputs are unregistered.
//
// If the empty latency is 1, we infer bypass logic
// around the memory so writes propagate to the
// outputs on the next cycle.
//
// Do not change the way this is coded: Quartus needs
// a perfect match to the template, and any attempt to
// refactor the two always blocks into one will break
// memory inference.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk9
if (EMPTY_LATENCY == 1) begin : gen_blk10
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] = in_payload;
internal_out_payload = mem[mem_rd_ptr];
end
end else begin : gen_blk10_else
always @(posedge clk) begin
if (in_valid && in_ready)
mem[wr_ptr] <= in_payload;
internal_out_payload <= mem[mem_rd_ptr];
end
end
assign mem_rd_ptr = next_rd_ptr;
end else begin : gen_blk9_else
// --------------------------------------------------
// Register-based FIFO storage
//
// Uses a shift register as the storage element. Each
// shift register slot has a bit which indicates if
// the slot is occupied (credit to Sam H for the idea).
// The occupancy bits are contiguous and start from the
// lsb, so 0000, 0001, 0011, 0111, 1111 for a 4-deep
// FIFO.
//
// Each slot is enabled during a read or when it
// is unoccupied. New data is always written to every
// going-to-be-empty slot (we keep track of which ones
// are actually useful with the occupancy bits). On a
// read we shift occupied slots.
//
// The exception is the last slot, which always gets
// new data when it is unoccupied.
// --------------------------------------------------
for (i = 0; i < DEPTH-1; i = i + 1) begin : shift_reg
always @(posedge clk or posedge reset) begin
if (reset) begin
mem[i] <= 0;
end
else if (read || !mem_used[i]) begin
if (!mem_used[i+1])
mem[i] <= in_payload;
else
mem[i] <= mem[i+1];
end
end
end
always @(posedge clk, posedge reset) begin
if (reset) begin
mem[DEPTH-1] <= 0;
end
else begin
if (DEPTH == 1) begin
if (write)
mem[DEPTH-1] <= in_payload;
end
else if (!mem_used[DEPTH-1])
mem[DEPTH-1] <= in_payload;
end
end
end
endgenerate
assign read = internal_out_ready && internal_out_valid && ok_to_forward;
assign write = in_ready && in_valid;
// --------------------------------------------------
// Pointer Management
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk11
assign incremented_wr_ptr = wr_ptr + 1'b1;
assign incremented_rd_ptr = rd_ptr + 1'b1;
assign next_wr_ptr = drop_on_error ? curr_sop_ptr : write ? incremented_wr_ptr : wr_ptr;
assign next_rd_ptr = (read) ? incremented_rd_ptr : rd_ptr;
always @(posedge clk or posedge reset) begin
if (reset) begin
wr_ptr <= 0;
rd_ptr <= 0;
end
else begin
wr_ptr <= next_wr_ptr;
rd_ptr <= next_rd_ptr;
end
end
end else begin : gen_blk11_else
// --------------------------------------------------
// Shift Register Occupancy Bits
//
// Consider a 4-deep FIFO with 2 entries: 0011
// On a read and write, do not modify the bits.
// On a write, left-shift the bits to get 0111.
// On a read, right-shift the bits to get 0001.
//
// Also, on a write we set bit0 (the head), while
// clearing the tail on a read.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[0] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[0] <= 1;
else if (read) begin
if (DEPTH > 1)
mem_used[0] <= mem_used[1];
else
mem_used[0] <= 0;
end
end
end
end
if (DEPTH > 1) begin : gen_blk12
always @(posedge clk or posedge reset) begin
if (reset) begin
mem_used[DEPTH-1] <= 0;
end
else begin
if (write ^ read) begin
mem_used[DEPTH-1] <= 0;
if (write)
mem_used[DEPTH-1] <= mem_used[DEPTH-2];
end
end
end
end
for (i = 1; i < DEPTH-1; i = i + 1) begin : storage_logic
always @(posedge clk, posedge reset) begin
if (reset) begin
mem_used[i] <= 0;
end
else begin
if (write ^ read) begin
if (write)
mem_used[i] <= mem_used[i-1];
else if (read)
mem_used[i] <= mem_used[i+1];
end
end
end
end
end
endgenerate
// --------------------------------------------------
// Memory FIFO Status Management
//
// Generates the full and empty signals from the
// pointers. The FIFO is full when the next write
// pointer will be equal to the read pointer after
// a write. Reading from a FIFO clears full.
//
// The FIFO is empty when the next read pointer will
// be equal to the write pointer after a read. Writing
// to a FIFO clears empty.
//
// A simultaneous read and write must not change any of
// the empty or full flags unless there is a drop on error event.
// --------------------------------------------------
generate if (USE_MEMORY_BLOCKS == 1) begin : gen_blk13
always @* begin
next_full = full;
next_empty = empty;
if (read && !write) begin
next_full = 1'b0;
if (incremented_rd_ptr == wr_ptr)
next_empty = 1'b1;
end
if (write && !read) begin
if (!drop_on_error)
next_empty = 1'b0;
else if (curr_sop_ptr == rd_ptr) // drop on error and only 1 pkt in fifo
next_empty = 1'b1;
if (incremented_wr_ptr == rd_ptr && !drop_on_error)
next_full = 1'b1;
end
if (write && read && drop_on_error) begin
if (curr_sop_ptr == next_rd_ptr)
next_empty = 1'b1;
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
empty <= 1;
full <= 0;
end
else begin
empty <= next_empty;
full <= next_full;
end
end
end else begin : gen_blk13_else
// --------------------------------------------------
// Register FIFO Status Management
//
// Full when the tail occupancy bit is 1. Empty when
// the head occupancy bit is 0.
// --------------------------------------------------
always @* begin
full = mem_used[DEPTH-1];
empty = !mem_used[0];
// ------------------------------------------
// For a single slot FIFO, reading clears the
// full status immediately.
// ------------------------------------------
if (DEPTH == 1)
full = mem_used[0] && !read;
internal_out_payload = mem[0];
// ------------------------------------------
// Writes clear empty immediately for lookahead modes.
// Note that we use in_valid instead of write to avoid
// combinational loops (in lookahead mode, qualifying
// with in_ready is meaningless).
//
// In a 1-deep FIFO, a possible combinational loop runs
// from write -> out_valid -> out_ready -> write
// ------------------------------------------
if (EMPTY_LATENCY == 0) begin
empty = !mem_used[0] && !in_valid;
if (!mem_used[0] && in_valid)
internal_out_payload = in_payload;
end
end
end
endgenerate
// --------------------------------------------------
// Avalon-ST Signals
//
// The in_ready signal is straightforward.
//
// To match memory latency when empty latency > 1,
// out_valid assertions must be delayed by one clock
// cycle.
//
// Note: out_valid deassertions must not be delayed or
// the FIFO will underflow.
// --------------------------------------------------
assign in_ready = !full;
assign internal_out_ready = out_ready || !out_valid;
generate if (EMPTY_LATENCY > 1) begin : gen_blk14
always @(posedge clk or posedge reset) begin
if (reset)
internal_out_valid <= 0;
else begin
internal_out_valid <= !empty & ok_to_forward & ~drop_on_error;
if (read) begin
if (incremented_rd_ptr == wr_ptr)
internal_out_valid <= 1'b0;
end
end
end
end else begin : gen_blk14_else
always @* begin
internal_out_valid = !empty & ok_to_forward;
end
end
endgenerate
// --------------------------------------------------
// Single Output Pipeline Stage
//
// This output pipeline stage is enabled if the FIFO's
// empty latency is set to 3 (default). It is disabled
// for all other allowed latencies.
//
// Reason: The memory outputs are unregistered, so we have to
// register the output or fmax will drop if combinatorial
// logic is present on the output datapath.
//
// Q: The Avalon-ST spec says that I have to register my outputs
// But isn't the memory counted as a register?
// A: The path from the address lookup to the memory output is
// slow. Registering the memory outputs is a good idea.
//
// The registers get packed into the memory by the fitter
// which means minimal resources are consumed (the result
// is a altsyncram with registered outputs, available on
// all modern Altera devices).
//
// This output stage acts as an extra slot in the FIFO,
// and complicates the fill level.
// --------------------------------------------------
generate if (EMPTY_LATENCY == 3) begin : gen_blk15
always @(posedge clk or posedge reset) begin
if (reset) begin
out_valid <= 0;
out_payload <= 0;
end
else begin
if (internal_out_ready) begin
out_valid <= internal_out_valid & ok_to_forward;
out_payload <= internal_out_payload;
end
end
end
end
else begin : gen_blk15_else
always @* begin
out_valid = internal_out_valid;
out_payload = internal_out_payload;
end
end
endgenerate
// --------------------------------------------------
// Fill Level
//
// The fill level is calculated from the next write
// and read pointers to avoid unnecessary latency
// and logic.
//
// However, if the store-and-forward mode of the FIFO
// is enabled, the fill level is an up-down counter
// for fmax optimization reasons.
//
// If the output pipeline is enabled, the fill level
// must account for it, or we'll always be off by one.
// This may, or may not be important depending on the
// application.
//
// For now, we'll always calculate the exact fill level
// at the cost of an extra adder when the output stage
// is enabled.
// --------------------------------------------------
generate if (USE_FILL_LEVEL) begin : gen_blk16
wire [31:0] depth32;
assign depth32 = DEPTH;
if (USE_STORE_FORWARD) begin
reg [ADDR_WIDTH : 0] curr_packet_len_less_one;
// --------------------------------------------------
// We only drop on endofpacket. As long as we don't add to the fill
// level on the dropped endofpacket cycle, we can simply subtract
// (packet length - 1) from the fill level for dropped packets.
// --------------------------------------------------
always @(posedge clk or posedge reset) begin
if (reset) begin
curr_packet_len_less_one <= 0;
end else begin
if (write) begin
curr_packet_len_less_one <= curr_packet_len_less_one + 1'b1;
if (in_endofpacket)
curr_packet_len_less_one <= 0;
end
end
end
always @(posedge clk or posedge reset) begin
if (reset) begin
fifo_fill_level <= 0;
end else if (drop_on_error) begin
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one;
if (read)
fifo_fill_level <= fifo_fill_level - curr_packet_len_less_one - 1'b1;
end else if (write && !read) begin
fifo_fill_level <= fifo_fill_level + 1'b1;
end else if (read && !write) begin
fifo_fill_level <= fifo_fill_level - 1'b1;
end
end
end else begin
always @(posedge clk or posedge reset) begin
if (reset)
fifo_fill_level <= 0;
else if (next_full & !drop_on_error)
fifo_fill_level <= depth32[ADDR_WIDTH:0];
else begin
fifo_fill_level[ADDR_WIDTH] <= 1'b0;
fifo_fill_level[ADDR_WIDTH-1 : 0] <= next_wr_ptr - next_rd_ptr;
end
end
end
always @* begin
fill_level = fifo_fill_level;
if (EMPTY_LATENCY == 3)
fill_level = fifo_fill_level + {{ADDR_WIDTH{1'b0}}, out_valid};
end
end
else begin : gen_blk16_else
always @* begin
fill_level = 0;
end
end
endgenerate
generate if (USE_ALMOST_FULL_IF) begin : gen_blk17
assign almost_full_data = (fill_level >= almost_full_threshold);
end
else
assign almost_full_data = 0;
endgenerate
generate if (USE_ALMOST_EMPTY_IF) begin : gen_blk18
assign almost_empty_data = (fill_level <= almost_empty_threshold);
end
else
assign almost_empty_data = 0;
endgenerate
// --------------------------------------------------
// Avalon-MM Status & Control Connection Point
//
// Register map:
//
// | Addr | RW | 31 - 0 |
// | 0 | R | Fill level |
//
// The registering of this connection point means
// that there is a cycle of latency between
// reads/writes and the updating of the fill level.
// --------------------------------------------------
generate if (USE_STORE_FORWARD) begin : gen_blk19
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
cut_through_threshold <= 0;
drop_on_error_en <= 0;
csr_readdata <= 0;
pkt_mode <= 1'b1;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 5)
csr_readdata <= {31'b0, drop_on_error_en};
else if (csr_address == 4)
csr_readdata <= {8'b0, cut_through_threshold};
else if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b101)
drop_on_error_en <= csr_writedata[0];
else if(csr_address == 3'b100) begin
cut_through_threshold <= csr_writedata[23:0];
pkt_mode <= (csr_writedata[23:0] == 0);
end
else if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else if (USE_ALMOST_FULL_IF || USE_ALMOST_EMPTY_IF) begin : gen_blk19_else1
assign max_fifo_size = FIFO_DEPTH - 1;
always @(posedge clk or posedge reset) begin
if (reset) begin
almost_full_threshold <= max_fifo_size[23 : 0];
almost_empty_threshold <= 0;
csr_readdata <= 0;
end
else begin
if (csr_read) begin
csr_readdata <= 32'b0;
if (csr_address == 3)
csr_readdata <= {8'b0, almost_empty_threshold};
else if (csr_address == 2)
csr_readdata <= {8'b0, almost_full_threshold};
else if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
else if (csr_write) begin
if(csr_address == 3'b011)
almost_empty_threshold <= csr_writedata[23:0];
else if(csr_address == 3'b010)
almost_full_threshold <= csr_writedata[23:0];
end
end
end
end
else begin : gen_blk19_else2
always @(posedge clk or posedge reset) begin
if (reset) begin
csr_readdata <= 0;
end
else if (csr_read) begin
csr_readdata <= 0;
if (csr_address == 0)
csr_readdata <= {{(31 - ADDR_WIDTH){1'b0}}, fill_level};
end
end
end
endgenerate
// --------------------------------------------------
// Store and forward logic
// --------------------------------------------------
// if the fifo gets full before the entire packet or the
// cut-threshold condition is met then start sending out
// data in order to avoid dead-lock situation
generate if (USE_STORE_FORWARD) begin : gen_blk20
assign wait_for_threshold = (fifo_fill_level_lt_cut_through_threshold) & wait_for_pkt ;
assign wait_for_pkt = pkt_cnt_eq_zero | (pkt_cnt_eq_one & out_pkt_leave);
assign ok_to_forward = (pkt_mode ? (~wait_for_pkt | ~pkt_has_started) :
~wait_for_threshold) | fifo_too_small_r;
assign in_pkt_eop_arrive = in_valid & in_ready & in_endofpacket;
assign in_pkt_start = in_valid & in_ready & in_startofpacket;
assign in_pkt_error = in_valid & in_ready & |in_error;
assign out_pkt_sop_leave = out_valid & out_ready & out_startofpacket;
assign out_pkt_leave = out_valid & out_ready & out_endofpacket;
assign fifo_too_small = (pkt_mode ? wait_for_pkt : wait_for_threshold) & full & out_ready;
// count packets coming and going into the fifo
always @(posedge clk or posedge reset) begin
if (reset) begin
pkt_cnt <= 0;
pkt_has_started <= 0;
sop_has_left_fifo <= 0;
fifo_too_small_r <= 0;
pkt_cnt_eq_zero <= 1'b1;
pkt_cnt_eq_one <= 1'b0;
fifo_fill_level_lt_cut_through_threshold <= 1'b1;
end
else begin
fifo_fill_level_lt_cut_through_threshold <= fifo_fill_level < cut_through_threshold;
fifo_too_small_r <= fifo_too_small;
if( in_pkt_eop_arrive )
sop_has_left_fifo <= 1'b0;
else if (out_pkt_sop_leave & pkt_cnt_eq_zero )
sop_has_left_fifo <= 1'b1;
if (in_pkt_eop_arrive & ~out_pkt_leave & ~drop_on_error ) begin
pkt_cnt <= pkt_cnt + 1'b1;
pkt_cnt_eq_zero <= 0;
if (pkt_cnt == 0)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
else if((~in_pkt_eop_arrive | drop_on_error) & out_pkt_leave) begin
pkt_cnt <= pkt_cnt - 1'b1;
if (pkt_cnt == 1)
pkt_cnt_eq_zero <= 1'b1;
else
pkt_cnt_eq_zero <= 1'b0;
if (pkt_cnt == 2)
pkt_cnt_eq_one <= 1'b1;
else
pkt_cnt_eq_one <= 1'b0;
end
if (in_pkt_start)
pkt_has_started <= 1'b1;
else if (in_pkt_eop_arrive)
pkt_has_started <= 1'b0;
end
end
// drop on error logic
always @(posedge clk or posedge reset) begin
if (reset) begin
sop_ptr <= 0;
error_in_pkt <= 0;
end
else begin
// save the location of the SOP
if ( in_pkt_start )
sop_ptr <= wr_ptr;
// remember if error in pkt
// log error only if packet has already started
if (in_pkt_eop_arrive)
error_in_pkt <= 1'b0;
else if ( in_pkt_error & (pkt_has_started | in_pkt_start))
error_in_pkt <= 1'b1;
end
end
assign drop_on_error = drop_on_error_en & (error_in_pkt | in_pkt_error) & in_pkt_eop_arrive &
~sop_has_left_fifo & ~(out_pkt_sop_leave & pkt_cnt_eq_zero);
assign curr_sop_ptr = (write && in_startofpacket && in_endofpacket) ? wr_ptr : sop_ptr;
end
else begin : gen_blk20_else
assign ok_to_forward = 1'b1;
assign drop_on_error = 1'b0;
if (ADDR_WIDTH <= 1)
assign curr_sop_ptr = 1'b0;
else
assign curr_sop_ptr = {ADDR_WIDTH - 1 { 1'b0 }};
end
endgenerate
// --------------------------------------------------
// Calculates the log2ceil of the input value
// --------------------------------------------------
function integer log2ceil;
input integer val;
reg[31:0] i;
begin
i = 1;
log2ceil = 0;
while (i < val) begin
log2ceil = log2ceil + 1;
i = i[30:0] << 1;
end
end
endfunction
endmodule
|
// -- (c) Copyright 2010 - 2011 Xilinx, Inc. All rights reserved.
// --
// -- This file contains confidential and proprietary information
// -- of Xilinx, Inc. and is protected under U.S. and
// -- international copyright and other intellectual property
// -- laws.
// --
// -- DISCLAIMER
// -- This disclaimer is not a license and does not grant any
// -- rights to the materials distributed herewith. Except as
// -- otherwise provided in a valid license issued to you by
// -- Xilinx, and to the maximum extent permitted by applicable
// -- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// -- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// -- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// -- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// -- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// -- (2) Xilinx shall not be liable (whether in contract or tort,
// -- including negligence, or under any other theory of
// -- liability) for any loss or damage of any kind or nature
// -- related to, arising under or in connection with these
// -- materials, including for any direct, or any indirect,
// -- special, incidental, or consequential loss or damage
// -- (including loss of data, profits, goodwill, or any type of
// -- loss or damage suffered as a result of any action brought
// -- by a third party) even if such damage or loss was
// -- reasonably foreseeable or Xilinx had been advised of the
// -- possibility of the same.
// --
// -- CRITICAL APPLICATIONS
// -- Xilinx products are not designed or intended to be fail-
// -- safe, or for use in any application requiring fail-safe
// -- performance, such as life-support or safety devices or
// -- systems, Class III medical devices, nuclear facilities,
// -- applications related to the deployment of airbags, or any
// -- other applications that could lead to death, personal
// -- injury, or severe property or environmental damage
// -- (individually and collectively, "Critical
// -- Applications"). Customer assumes the sole risk and
// -- liability of any use of Xilinx products in Critical
// -- Applications, subject only to applicable laws and
// -- regulations governing limitations on product liability.
// --
// -- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// -- PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
//
// Description: Read Data Response AXI3 Slave Converter
// Forwards and re-assembles split transactions.
//
// Verilog-standard: Verilog 2001
//--------------------------------------------------------------------------
//
// Structure:
// r_axi3_conv
//
//--------------------------------------------------------------------------
`timescale 1ps/1ps
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_r_axi3_conv #
(
parameter C_FAMILY = "none",
parameter integer C_AXI_ID_WIDTH = 1,
parameter integer C_AXI_ADDR_WIDTH = 32,
parameter integer C_AXI_DATA_WIDTH = 32,
parameter integer C_AXI_SUPPORTS_USER_SIGNALS = 0,
parameter integer C_AXI_RUSER_WIDTH = 1,
parameter integer C_SUPPORT_SPLITTING = 1,
// Implement transaction splitting logic.
// Disabled whan all connected masters are AXI3 and have same or narrower data width.
parameter integer C_SUPPORT_BURSTS = 1
// Disabled when all connected masters are AxiLite,
// allowing logic to be simplified.
)
(
// System Signals
input wire ACLK,
input wire ARESET,
// Command Interface
input wire cmd_valid,
input wire cmd_split,
output wire cmd_ready,
// Slave Interface Read Data Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_RID,
output wire [C_AXI_DATA_WIDTH-1:0] S_AXI_RDATA,
output wire [2-1:0] S_AXI_RRESP,
output wire S_AXI_RLAST,
output wire [C_AXI_RUSER_WIDTH-1:0] S_AXI_RUSER,
output wire S_AXI_RVALID,
input wire S_AXI_RREADY,
// Master Interface Read Data Ports
input wire [C_AXI_ID_WIDTH-1:0] M_AXI_RID,
input wire [C_AXI_DATA_WIDTH-1:0] M_AXI_RDATA,
input wire [2-1:0] M_AXI_RRESP,
input wire M_AXI_RLAST,
input wire [C_AXI_RUSER_WIDTH-1:0] M_AXI_RUSER,
input wire M_AXI_RVALID,
output wire M_AXI_RREADY
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Constants for packing levels.
localparam [2-1:0] C_RESP_OKAY = 2'b00;
localparam [2-1:0] C_RESP_EXOKAY = 2'b01;
localparam [2-1:0] C_RESP_SLVERROR = 2'b10;
localparam [2-1:0] C_RESP_DECERR = 2'b11;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
// Throttling help signals.
wire cmd_ready_i;
wire pop_si_data;
wire si_stalling;
// Internal MI-side control signals.
wire M_AXI_RREADY_I;
// Internal signals for SI-side.
wire [C_AXI_ID_WIDTH-1:0] S_AXI_RID_I;
wire [C_AXI_DATA_WIDTH-1:0] S_AXI_RDATA_I;
wire [2-1:0] S_AXI_RRESP_I;
wire S_AXI_RLAST_I;
wire [C_AXI_RUSER_WIDTH-1:0] S_AXI_RUSER_I;
wire S_AXI_RVALID_I;
wire S_AXI_RREADY_I;
/////////////////////////////////////////////////////////////////////////////
// Handle interface handshaking:
//
// Forward data from MI-Side to SI-Side while a command is available. When
// the transaction has completed the command is popped from the Command FIFO.
//
//
/////////////////////////////////////////////////////////////////////////////
// Pop word from SI-side.
assign M_AXI_RREADY_I = ~si_stalling & cmd_valid;
assign M_AXI_RREADY = M_AXI_RREADY_I;
// Indicate when there is data available @ SI-side.
assign S_AXI_RVALID_I = M_AXI_RVALID & cmd_valid;
// Get SI-side data.
assign pop_si_data = S_AXI_RVALID_I & S_AXI_RREADY_I;
// Signal that the command is done (so that it can be poped from command queue).
assign cmd_ready_i = cmd_valid & pop_si_data & M_AXI_RLAST;
assign cmd_ready = cmd_ready_i;
// Detect when MI-side is stalling.
assign si_stalling = S_AXI_RVALID_I & ~S_AXI_RREADY_I;
/////////////////////////////////////////////////////////////////////////////
// Simple AXI signal forwarding:
//
// USER, ID, DATA and RRESP passes through untouched.
//
// LAST has to be filtered to remove any intermediate LAST (due to split
// trasactions). LAST is only removed for the first parts of a split
// transaction. When splitting is unsupported is the LAST filtering completely
// completely removed.
//
/////////////////////////////////////////////////////////////////////////////
// Calculate last, i.e. mask from split transactions.
assign S_AXI_RLAST_I = M_AXI_RLAST &
( ~cmd_split | ( C_SUPPORT_SPLITTING == 0 ) );
// Data is passed through.
assign S_AXI_RID_I = M_AXI_RID;
assign S_AXI_RUSER_I = M_AXI_RUSER;
assign S_AXI_RDATA_I = M_AXI_RDATA;
assign S_AXI_RRESP_I = M_AXI_RRESP;
/////////////////////////////////////////////////////////////////////////////
// SI-side output handling
//
/////////////////////////////////////////////////////////////////////////////
// TODO: registered?
assign S_AXI_RREADY_I = S_AXI_RREADY;
assign S_AXI_RVALID = S_AXI_RVALID_I;
assign S_AXI_RID = S_AXI_RID_I;
assign S_AXI_RDATA = S_AXI_RDATA_I;
assign S_AXI_RRESP = S_AXI_RRESP_I;
assign S_AXI_RLAST = S_AXI_RLAST_I;
assign S_AXI_RUSER = S_AXI_RUSER_I;
endmodule
|
// -- (c) Copyright 2010 - 2011 Xilinx, Inc. All rights reserved.
// --
// -- This file contains confidential and proprietary information
// -- of Xilinx, Inc. and is protected under U.S. and
// -- international copyright and other intellectual property
// -- laws.
// --
// -- DISCLAIMER
// -- This disclaimer is not a license and does not grant any
// -- rights to the materials distributed herewith. Except as
// -- otherwise provided in a valid license issued to you by
// -- Xilinx, and to the maximum extent permitted by applicable
// -- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// -- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// -- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// -- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// -- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// -- (2) Xilinx shall not be liable (whether in contract or tort,
// -- including negligence, or under any other theory of
// -- liability) for any loss or damage of any kind or nature
// -- related to, arising under or in connection with these
// -- materials, including for any direct, or any indirect,
// -- special, incidental, or consequential loss or damage
// -- (including loss of data, profits, goodwill, or any type of
// -- loss or damage suffered as a result of any action brought
// -- by a third party) even if such damage or loss was
// -- reasonably foreseeable or Xilinx had been advised of the
// -- possibility of the same.
// --
// -- CRITICAL APPLICATIONS
// -- Xilinx products are not designed or intended to be fail-
// -- safe, or for use in any application requiring fail-safe
// -- performance, such as life-support or safety devices or
// -- systems, Class III medical devices, nuclear facilities,
// -- applications related to the deployment of airbags, or any
// -- other applications that could lead to death, personal
// -- injury, or severe property or environmental damage
// -- (individually and collectively, "Critical
// -- Applications"). Customer assumes the sole risk and
// -- liability of any use of Xilinx products in Critical
// -- Applications, subject only to applicable laws and
// -- regulations governing limitations on product liability.
// --
// -- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// -- PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
//
// Description: Read Data Response AXI3 Slave Converter
// Forwards and re-assembles split transactions.
//
// Verilog-standard: Verilog 2001
//--------------------------------------------------------------------------
//
// Structure:
// r_axi3_conv
//
//--------------------------------------------------------------------------
`timescale 1ps/1ps
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_r_axi3_conv #
(
parameter C_FAMILY = "none",
parameter integer C_AXI_ID_WIDTH = 1,
parameter integer C_AXI_ADDR_WIDTH = 32,
parameter integer C_AXI_DATA_WIDTH = 32,
parameter integer C_AXI_SUPPORTS_USER_SIGNALS = 0,
parameter integer C_AXI_RUSER_WIDTH = 1,
parameter integer C_SUPPORT_SPLITTING = 1,
// Implement transaction splitting logic.
// Disabled whan all connected masters are AXI3 and have same or narrower data width.
parameter integer C_SUPPORT_BURSTS = 1
// Disabled when all connected masters are AxiLite,
// allowing logic to be simplified.
)
(
// System Signals
input wire ACLK,
input wire ARESET,
// Command Interface
input wire cmd_valid,
input wire cmd_split,
output wire cmd_ready,
// Slave Interface Read Data Ports
output wire [C_AXI_ID_WIDTH-1:0] S_AXI_RID,
output wire [C_AXI_DATA_WIDTH-1:0] S_AXI_RDATA,
output wire [2-1:0] S_AXI_RRESP,
output wire S_AXI_RLAST,
output wire [C_AXI_RUSER_WIDTH-1:0] S_AXI_RUSER,
output wire S_AXI_RVALID,
input wire S_AXI_RREADY,
// Master Interface Read Data Ports
input wire [C_AXI_ID_WIDTH-1:0] M_AXI_RID,
input wire [C_AXI_DATA_WIDTH-1:0] M_AXI_RDATA,
input wire [2-1:0] M_AXI_RRESP,
input wire M_AXI_RLAST,
input wire [C_AXI_RUSER_WIDTH-1:0] M_AXI_RUSER,
input wire M_AXI_RVALID,
output wire M_AXI_RREADY
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Constants for packing levels.
localparam [2-1:0] C_RESP_OKAY = 2'b00;
localparam [2-1:0] C_RESP_EXOKAY = 2'b01;
localparam [2-1:0] C_RESP_SLVERROR = 2'b10;
localparam [2-1:0] C_RESP_DECERR = 2'b11;
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
// Throttling help signals.
wire cmd_ready_i;
wire pop_si_data;
wire si_stalling;
// Internal MI-side control signals.
wire M_AXI_RREADY_I;
// Internal signals for SI-side.
wire [C_AXI_ID_WIDTH-1:0] S_AXI_RID_I;
wire [C_AXI_DATA_WIDTH-1:0] S_AXI_RDATA_I;
wire [2-1:0] S_AXI_RRESP_I;
wire S_AXI_RLAST_I;
wire [C_AXI_RUSER_WIDTH-1:0] S_AXI_RUSER_I;
wire S_AXI_RVALID_I;
wire S_AXI_RREADY_I;
/////////////////////////////////////////////////////////////////////////////
// Handle interface handshaking:
//
// Forward data from MI-Side to SI-Side while a command is available. When
// the transaction has completed the command is popped from the Command FIFO.
//
//
/////////////////////////////////////////////////////////////////////////////
// Pop word from SI-side.
assign M_AXI_RREADY_I = ~si_stalling & cmd_valid;
assign M_AXI_RREADY = M_AXI_RREADY_I;
// Indicate when there is data available @ SI-side.
assign S_AXI_RVALID_I = M_AXI_RVALID & cmd_valid;
// Get SI-side data.
assign pop_si_data = S_AXI_RVALID_I & S_AXI_RREADY_I;
// Signal that the command is done (so that it can be poped from command queue).
assign cmd_ready_i = cmd_valid & pop_si_data & M_AXI_RLAST;
assign cmd_ready = cmd_ready_i;
// Detect when MI-side is stalling.
assign si_stalling = S_AXI_RVALID_I & ~S_AXI_RREADY_I;
/////////////////////////////////////////////////////////////////////////////
// Simple AXI signal forwarding:
//
// USER, ID, DATA and RRESP passes through untouched.
//
// LAST has to be filtered to remove any intermediate LAST (due to split
// trasactions). LAST is only removed for the first parts of a split
// transaction. When splitting is unsupported is the LAST filtering completely
// completely removed.
//
/////////////////////////////////////////////////////////////////////////////
// Calculate last, i.e. mask from split transactions.
assign S_AXI_RLAST_I = M_AXI_RLAST &
( ~cmd_split | ( C_SUPPORT_SPLITTING == 0 ) );
// Data is passed through.
assign S_AXI_RID_I = M_AXI_RID;
assign S_AXI_RUSER_I = M_AXI_RUSER;
assign S_AXI_RDATA_I = M_AXI_RDATA;
assign S_AXI_RRESP_I = M_AXI_RRESP;
/////////////////////////////////////////////////////////////////////////////
// SI-side output handling
//
/////////////////////////////////////////////////////////////////////////////
// TODO: registered?
assign S_AXI_RREADY_I = S_AXI_RREADY;
assign S_AXI_RVALID = S_AXI_RVALID_I;
assign S_AXI_RID = S_AXI_RID_I;
assign S_AXI_RDATA = S_AXI_RDATA_I;
assign S_AXI_RRESP = S_AXI_RRESP_I;
assign S_AXI_RLAST = S_AXI_RLAST_I;
assign S_AXI_RUSER = S_AXI_RUSER_I;
endmodule
|
/*
*
* Copyright (c) 2011 fpgaminer@bitcoin-mining.com
*
*
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
`timescale 1ns/1ps
module e0 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[1:0],x[31:2]} ^ {x[12:0],x[31:13]} ^ {x[21:0],x[31:22]};
endmodule
module e1 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[5:0],x[31:6]} ^ {x[10:0],x[31:11]} ^ {x[24:0],x[31:25]};
endmodule
module ch (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = z ^ (x & (y ^ z));
endmodule
module maj (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = (x & y) | (z & (x | y));
endmodule
module s0 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:29] = x[6:4] ^ x[17:15];
assign y[28:0] = {x[3:0], x[31:7]} ^ {x[14:0],x[31:18]} ^ x[31:3];
endmodule
module s1 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:22] = x[16:7] ^ x[18:9];
assign y[21:0] = {x[6:0],x[31:17]} ^ {x[8:0],x[31:19]} ^ x[31:10];
endmodule
|
/*
*
* Copyright (c) 2011 fpgaminer@bitcoin-mining.com
*
*
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
`timescale 1ns/1ps
module e0 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[1:0],x[31:2]} ^ {x[12:0],x[31:13]} ^ {x[21:0],x[31:22]};
endmodule
module e1 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[5:0],x[31:6]} ^ {x[10:0],x[31:11]} ^ {x[24:0],x[31:25]};
endmodule
module ch (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = z ^ (x & (y ^ z));
endmodule
module maj (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = (x & y) | (z & (x | y));
endmodule
module s0 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:29] = x[6:4] ^ x[17:15];
assign y[28:0] = {x[3:0], x[31:7]} ^ {x[14:0],x[31:18]} ^ x[31:3];
endmodule
module s1 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:22] = x[16:7] ^ x[18:9];
assign y[21:0] = {x[6:0],x[31:17]} ^ {x[8:0],x[31:19]} ^ x[31:10];
endmodule
|
/*
*
* Copyright (c) 2011 fpgaminer@bitcoin-mining.com
*
*
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
`timescale 1ns/1ps
module e0 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[1:0],x[31:2]} ^ {x[12:0],x[31:13]} ^ {x[21:0],x[31:22]};
endmodule
module e1 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[5:0],x[31:6]} ^ {x[10:0],x[31:11]} ^ {x[24:0],x[31:25]};
endmodule
module ch (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = z ^ (x & (y ^ z));
endmodule
module maj (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = (x & y) | (z & (x | y));
endmodule
module s0 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:29] = x[6:4] ^ x[17:15];
assign y[28:0] = {x[3:0], x[31:7]} ^ {x[14:0],x[31:18]} ^ x[31:3];
endmodule
module s1 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:22] = x[16:7] ^ x[18:9];
assign y[21:0] = {x[6:0],x[31:17]} ^ {x[8:0],x[31:19]} ^ x[31:10];
endmodule
|
/*
*
* Copyright (c) 2011 fpgaminer@bitcoin-mining.com
*
*
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
`timescale 1ns/1ps
module e0 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[1:0],x[31:2]} ^ {x[12:0],x[31:13]} ^ {x[21:0],x[31:22]};
endmodule
module e1 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[5:0],x[31:6]} ^ {x[10:0],x[31:11]} ^ {x[24:0],x[31:25]};
endmodule
module ch (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = z ^ (x & (y ^ z));
endmodule
module maj (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = (x & y) | (z & (x | y));
endmodule
module s0 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:29] = x[6:4] ^ x[17:15];
assign y[28:0] = {x[3:0], x[31:7]} ^ {x[14:0],x[31:18]} ^ x[31:3];
endmodule
module s1 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:22] = x[16:7] ^ x[18:9];
assign y[21:0] = {x[6:0],x[31:17]} ^ {x[8:0],x[31:19]} ^ x[31:10];
endmodule
|
/*
*
* Copyright (c) 2011 fpgaminer@bitcoin-mining.com
*
*
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
`timescale 1ns/1ps
module e0 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[1:0],x[31:2]} ^ {x[12:0],x[31:13]} ^ {x[21:0],x[31:22]};
endmodule
module e1 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[5:0],x[31:6]} ^ {x[10:0],x[31:11]} ^ {x[24:0],x[31:25]};
endmodule
module ch (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = z ^ (x & (y ^ z));
endmodule
module maj (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = (x & y) | (z & (x | y));
endmodule
module s0 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:29] = x[6:4] ^ x[17:15];
assign y[28:0] = {x[3:0], x[31:7]} ^ {x[14:0],x[31:18]} ^ x[31:3];
endmodule
module s1 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:22] = x[16:7] ^ x[18:9];
assign y[21:0] = {x[6:0],x[31:17]} ^ {x[8:0],x[31:19]} ^ x[31:10];
endmodule
|
/*
*
* Copyright (c) 2011 fpgaminer@bitcoin-mining.com
*
*
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
`timescale 1ns/1ps
module e0 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[1:0],x[31:2]} ^ {x[12:0],x[31:13]} ^ {x[21:0],x[31:22]};
endmodule
module e1 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[5:0],x[31:6]} ^ {x[10:0],x[31:11]} ^ {x[24:0],x[31:25]};
endmodule
module ch (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = z ^ (x & (y ^ z));
endmodule
module maj (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = (x & y) | (z & (x | y));
endmodule
module s0 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:29] = x[6:4] ^ x[17:15];
assign y[28:0] = {x[3:0], x[31:7]} ^ {x[14:0],x[31:18]} ^ x[31:3];
endmodule
module s1 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:22] = x[16:7] ^ x[18:9];
assign y[21:0] = {x[6:0],x[31:17]} ^ {x[8:0],x[31:19]} ^ x[31:10];
endmodule
|
/*
*
* Copyright (c) 2011 fpgaminer@bitcoin-mining.com
*
*
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
`timescale 1ns/1ps
module e0 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[1:0],x[31:2]} ^ {x[12:0],x[31:13]} ^ {x[21:0],x[31:22]};
endmodule
module e1 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[5:0],x[31:6]} ^ {x[10:0],x[31:11]} ^ {x[24:0],x[31:25]};
endmodule
module ch (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = z ^ (x & (y ^ z));
endmodule
module maj (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = (x & y) | (z & (x | y));
endmodule
module s0 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:29] = x[6:4] ^ x[17:15];
assign y[28:0] = {x[3:0], x[31:7]} ^ {x[14:0],x[31:18]} ^ x[31:3];
endmodule
module s1 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:22] = x[16:7] ^ x[18:9];
assign y[21:0] = {x[6:0],x[31:17]} ^ {x[8:0],x[31:19]} ^ x[31:10];
endmodule
|
/*
*
* Copyright (c) 2011 fpgaminer@bitcoin-mining.com
*
*
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
`timescale 1ns/1ps
module e0 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[1:0],x[31:2]} ^ {x[12:0],x[31:13]} ^ {x[21:0],x[31:22]};
endmodule
module e1 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[5:0],x[31:6]} ^ {x[10:0],x[31:11]} ^ {x[24:0],x[31:25]};
endmodule
module ch (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = z ^ (x & (y ^ z));
endmodule
module maj (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = (x & y) | (z & (x | y));
endmodule
module s0 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:29] = x[6:4] ^ x[17:15];
assign y[28:0] = {x[3:0], x[31:7]} ^ {x[14:0],x[31:18]} ^ x[31:3];
endmodule
module s1 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:22] = x[16:7] ^ x[18:9];
assign y[21:0] = {x[6:0],x[31:17]} ^ {x[8:0],x[31:19]} ^ x[31:10];
endmodule
|
/*
*
* Copyright (c) 2011 fpgaminer@bitcoin-mining.com
*
*
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
`timescale 1ns/1ps
module e0 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[1:0],x[31:2]} ^ {x[12:0],x[31:13]} ^ {x[21:0],x[31:22]};
endmodule
module e1 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[5:0],x[31:6]} ^ {x[10:0],x[31:11]} ^ {x[24:0],x[31:25]};
endmodule
module ch (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = z ^ (x & (y ^ z));
endmodule
module maj (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = (x & y) | (z & (x | y));
endmodule
module s0 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:29] = x[6:4] ^ x[17:15];
assign y[28:0] = {x[3:0], x[31:7]} ^ {x[14:0],x[31:18]} ^ x[31:3];
endmodule
module s1 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:22] = x[16:7] ^ x[18:9];
assign y[21:0] = {x[6:0],x[31:17]} ^ {x[8:0],x[31:19]} ^ x[31:10];
endmodule
|
/*
*
* Copyright (c) 2011 fpgaminer@bitcoin-mining.com
*
*
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
`timescale 1ns/1ps
module e0 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[1:0],x[31:2]} ^ {x[12:0],x[31:13]} ^ {x[21:0],x[31:22]};
endmodule
module e1 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[5:0],x[31:6]} ^ {x[10:0],x[31:11]} ^ {x[24:0],x[31:25]};
endmodule
module ch (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = z ^ (x & (y ^ z));
endmodule
module maj (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = (x & y) | (z & (x | y));
endmodule
module s0 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:29] = x[6:4] ^ x[17:15];
assign y[28:0] = {x[3:0], x[31:7]} ^ {x[14:0],x[31:18]} ^ x[31:3];
endmodule
module s1 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:22] = x[16:7] ^ x[18:9];
assign y[21:0] = {x[6:0],x[31:17]} ^ {x[8:0],x[31:19]} ^ x[31:10];
endmodule
|
/*
*
* Copyright (c) 2011 fpgaminer@bitcoin-mining.com
*
*
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
`timescale 1ns/1ps
module e0 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[1:0],x[31:2]} ^ {x[12:0],x[31:13]} ^ {x[21:0],x[31:22]};
endmodule
module e1 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[5:0],x[31:6]} ^ {x[10:0],x[31:11]} ^ {x[24:0],x[31:25]};
endmodule
module ch (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = z ^ (x & (y ^ z));
endmodule
module maj (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = (x & y) | (z & (x | y));
endmodule
module s0 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:29] = x[6:4] ^ x[17:15];
assign y[28:0] = {x[3:0], x[31:7]} ^ {x[14:0],x[31:18]} ^ x[31:3];
endmodule
module s1 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:22] = x[16:7] ^ x[18:9];
assign y[21:0] = {x[6:0],x[31:17]} ^ {x[8:0],x[31:19]} ^ x[31:10];
endmodule
|
/*
*
* Copyright (c) 2011 fpgaminer@bitcoin-mining.com
*
*
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
`timescale 1ns/1ps
module e0 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[1:0],x[31:2]} ^ {x[12:0],x[31:13]} ^ {x[21:0],x[31:22]};
endmodule
module e1 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[5:0],x[31:6]} ^ {x[10:0],x[31:11]} ^ {x[24:0],x[31:25]};
endmodule
module ch (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = z ^ (x & (y ^ z));
endmodule
module maj (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = (x & y) | (z & (x | y));
endmodule
module s0 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:29] = x[6:4] ^ x[17:15];
assign y[28:0] = {x[3:0], x[31:7]} ^ {x[14:0],x[31:18]} ^ x[31:3];
endmodule
module s1 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:22] = x[16:7] ^ x[18:9];
assign y[21:0] = {x[6:0],x[31:17]} ^ {x[8:0],x[31:19]} ^ x[31:10];
endmodule
|
/*
*
* Copyright (c) 2011 fpgaminer@bitcoin-mining.com
*
*
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
`timescale 1ns/1ps
module e0 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[1:0],x[31:2]} ^ {x[12:0],x[31:13]} ^ {x[21:0],x[31:22]};
endmodule
module e1 (x, y);
input [31:0] x;
output [31:0] y;
assign y = {x[5:0],x[31:6]} ^ {x[10:0],x[31:11]} ^ {x[24:0],x[31:25]};
endmodule
module ch (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = z ^ (x & (y ^ z));
endmodule
module maj (x, y, z, o);
input [31:0] x, y, z;
output [31:0] o;
assign o = (x & y) | (z & (x | y));
endmodule
module s0 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:29] = x[6:4] ^ x[17:15];
assign y[28:0] = {x[3:0], x[31:7]} ^ {x[14:0],x[31:18]} ^ x[31:3];
endmodule
module s1 (x, y);
input [31:0] x;
output [31:0] y;
assign y[31:22] = x[16:7] ^ x[18:9];
assign y[21:0] = {x[6:0],x[31:17]} ^ {x[8:0],x[31:19]} ^ x[31:10];
endmodule
|
// -- (c) Copyright 2012 -2013 Xilinx, Inc. All rights reserved.
// --
// -- This file contains confidential and proprietary information
// -- of Xilinx, Inc. and is protected under U.S. and
// -- international copyright and other intellectual property
// -- laws.
// --
// -- DISCLAIMER
// -- This disclaimer is not a license and does not grant any
// -- rights to the materials distributed herewith. Except as
// -- otherwise provided in a valid license issued to you by
// -- Xilinx, and to the maximum extent permitted by applicable
// -- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// -- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// -- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// -- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// -- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// -- (2) Xilinx shall not be liable (whether in contract or tort,
// -- including negligence, or under any other theory of
// -- liability) for any loss or damage of any kind or nature
// -- related to, arising under or in connection with these
// -- materials, including for any direct, or any indirect,
// -- special, incidental, or consequential loss or damage
// -- (including loss of data, profits, goodwill, or any type of
// -- loss or damage suffered as a result of any action brought
// -- by a third party) even if such damage or loss was
// -- reasonably foreseeable or Xilinx had been advised of the
// -- possibility of the same.
// --
// -- CRITICAL APPLICATIONS
// -- Xilinx products are not designed or intended to be fail-
// -- safe, or for use in any application requiring fail-safe
// -- performance, such as life-support or safety devices or
// -- systems, Class III medical devices, nuclear facilities,
// -- applications related to the deployment of airbags, or any
// -- other applications that could lead to death, personal
// -- injury, or severe property or environmental damage
// -- (individually and collectively, "Critical
// -- Applications"). Customer assumes the sole risk and
// -- liability of any use of Xilinx products in Critical
// -- Applications, subject only to applicable laws and
// -- regulations governing limitations on product liability.
// --
// -- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// -- PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
//
// File name: axi_protocol_converter.v
//
// Description:
// This module is a bank of AXI4-Lite and AXI3 protocol converters for a vectored AXI interface.
// The interface of this module consists of a vectored slave and master interface
// which are each concatenations of upper-level AXI pathways,
// plus various vectored parameters.
// This module instantiates a set of individual protocol converter modules.
//
//-----------------------------------------------------------------------------
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_axi_protocol_converter #(
parameter C_FAMILY = "virtex6",
parameter integer C_M_AXI_PROTOCOL = 0,
parameter integer C_S_AXI_PROTOCOL = 0,
parameter integer C_IGNORE_ID = 0,
// 0 = RID/BID are stored by axilite_conv.
// 1 = RID/BID have already been stored in an upstream device, like SASD crossbar.
parameter integer C_AXI_ID_WIDTH = 4,
parameter integer C_AXI_ADDR_WIDTH = 32,
parameter integer C_AXI_DATA_WIDTH = 32,
parameter integer C_AXI_SUPPORTS_WRITE = 1,
parameter integer C_AXI_SUPPORTS_READ = 1,
parameter integer C_AXI_SUPPORTS_USER_SIGNALS = 0,
// 1 = Propagate all USER signals, 0 = Dont propagate.
parameter integer C_AXI_AWUSER_WIDTH = 1,
parameter integer C_AXI_ARUSER_WIDTH = 1,
parameter integer C_AXI_WUSER_WIDTH = 1,
parameter integer C_AXI_RUSER_WIDTH = 1,
parameter integer C_AXI_BUSER_WIDTH = 1,
parameter integer C_TRANSLATION_MODE = 1
// 0 (Unprotected) = Disable all error checking; master is well-behaved.
// 1 (Protection) = Detect SI transaction violations, but perform no splitting.
// AXI4 -> AXI3 must be <= 16 beats; AXI4/3 -> AXI4LITE must be single.
// 2 (Conversion) = Include transaction splitting logic
) (
// Global Signals
input wire aclk,
input wire aresetn,
// Slave Interface Write Address Ports
input wire [C_AXI_ID_WIDTH-1:0] s_axi_awid,
input wire [C_AXI_ADDR_WIDTH-1:0] s_axi_awaddr,
input wire [((C_S_AXI_PROTOCOL == 1) ? 4 : 8)-1:0] s_axi_awlen,
input wire [3-1:0] s_axi_awsize,
input wire [2-1:0] s_axi_awburst,
input wire [((C_S_AXI_PROTOCOL == 1) ? 2 : 1)-1:0] s_axi_awlock,
input wire [4-1:0] s_axi_awcache,
input wire [3-1:0] s_axi_awprot,
input wire [4-1:0] s_axi_awregion,
input wire [4-1:0] s_axi_awqos,
input wire [C_AXI_AWUSER_WIDTH-1:0] s_axi_awuser,
input wire s_axi_awvalid,
output wire s_axi_awready,
// Slave Interface Write Data Ports
input wire [C_AXI_ID_WIDTH-1:0] s_axi_wid,
input wire [C_AXI_DATA_WIDTH-1:0] s_axi_wdata,
input wire [C_AXI_DATA_WIDTH/8-1:0] s_axi_wstrb,
input wire s_axi_wlast,
input wire [C_AXI_WUSER_WIDTH-1:0] s_axi_wuser,
input wire s_axi_wvalid,
output wire s_axi_wready,
// Slave Interface Write Response Ports
output wire [C_AXI_ID_WIDTH-1:0] s_axi_bid,
output wire [2-1:0] s_axi_bresp,
output wire [C_AXI_BUSER_WIDTH-1:0] s_axi_buser,
output wire s_axi_bvalid,
input wire s_axi_bready,
// Slave Interface Read Address Ports
input wire [C_AXI_ID_WIDTH-1:0] s_axi_arid,
input wire [C_AXI_ADDR_WIDTH-1:0] s_axi_araddr,
input wire [((C_S_AXI_PROTOCOL == 1) ? 4 : 8)-1:0] s_axi_arlen,
input wire [3-1:0] s_axi_arsize,
input wire [2-1:0] s_axi_arburst,
input wire [((C_S_AXI_PROTOCOL == 1) ? 2 : 1)-1:0] s_axi_arlock,
input wire [4-1:0] s_axi_arcache,
input wire [3-1:0] s_axi_arprot,
input wire [4-1:0] s_axi_arregion,
input wire [4-1:0] s_axi_arqos,
input wire [C_AXI_ARUSER_WIDTH-1:0] s_axi_aruser,
input wire s_axi_arvalid,
output wire s_axi_arready,
// Slave Interface Read Data Ports
output wire [C_AXI_ID_WIDTH-1:0] s_axi_rid,
output wire [C_AXI_DATA_WIDTH-1:0] s_axi_rdata,
output wire [2-1:0] s_axi_rresp,
output wire s_axi_rlast,
output wire [C_AXI_RUSER_WIDTH-1:0] s_axi_ruser,
output wire s_axi_rvalid,
input wire s_axi_rready,
// Master Interface Write Address Port
output wire [C_AXI_ID_WIDTH-1:0] m_axi_awid,
output wire [C_AXI_ADDR_WIDTH-1:0] m_axi_awaddr,
output wire [((C_M_AXI_PROTOCOL == 1) ? 4 : 8)-1:0] m_axi_awlen,
output wire [3-1:0] m_axi_awsize,
output wire [2-1:0] m_axi_awburst,
output wire [((C_M_AXI_PROTOCOL == 1) ? 2 : 1)-1:0] m_axi_awlock,
output wire [4-1:0] m_axi_awcache,
output wire [3-1:0] m_axi_awprot,
output wire [4-1:0] m_axi_awregion,
output wire [4-1:0] m_axi_awqos,
output wire [C_AXI_AWUSER_WIDTH-1:0] m_axi_awuser,
output wire m_axi_awvalid,
input wire m_axi_awready,
// Master Interface Write Data Ports
output wire [C_AXI_ID_WIDTH-1:0] m_axi_wid,
output wire [C_AXI_DATA_WIDTH-1:0] m_axi_wdata,
output wire [C_AXI_DATA_WIDTH/8-1:0] m_axi_wstrb,
output wire m_axi_wlast,
output wire [C_AXI_WUSER_WIDTH-1:0] m_axi_wuser,
output wire m_axi_wvalid,
input wire m_axi_wready,
// Master Interface Write Response Ports
input wire [C_AXI_ID_WIDTH-1:0] m_axi_bid,
input wire [2-1:0] m_axi_bresp,
input wire [C_AXI_BUSER_WIDTH-1:0] m_axi_buser,
input wire m_axi_bvalid,
output wire m_axi_bready,
// Master Interface Read Address Port
output wire [C_AXI_ID_WIDTH-1:0] m_axi_arid,
output wire [C_AXI_ADDR_WIDTH-1:0] m_axi_araddr,
output wire [((C_M_AXI_PROTOCOL == 1) ? 4 : 8)-1:0] m_axi_arlen,
output wire [3-1:0] m_axi_arsize,
output wire [2-1:0] m_axi_arburst,
output wire [((C_M_AXI_PROTOCOL == 1) ? 2 : 1)-1:0] m_axi_arlock,
output wire [4-1:0] m_axi_arcache,
output wire [3-1:0] m_axi_arprot,
output wire [4-1:0] m_axi_arregion,
output wire [4-1:0] m_axi_arqos,
output wire [C_AXI_ARUSER_WIDTH-1:0] m_axi_aruser,
output wire m_axi_arvalid,
input wire m_axi_arready,
// Master Interface Read Data Ports
input wire [C_AXI_ID_WIDTH-1:0] m_axi_rid,
input wire [C_AXI_DATA_WIDTH-1:0] m_axi_rdata,
input wire [2-1:0] m_axi_rresp,
input wire m_axi_rlast,
input wire [C_AXI_RUSER_WIDTH-1:0] m_axi_ruser,
input wire m_axi_rvalid,
output wire m_axi_rready
);
localparam P_AXI4 = 32'h0;
localparam P_AXI3 = 32'h1;
localparam P_AXILITE = 32'h2;
localparam P_AXILITE_SIZE = (C_AXI_DATA_WIDTH == 32) ? 3'b010 : 3'b011;
localparam P_INCR = 2'b01;
localparam P_DECERR = 2'b11;
localparam P_SLVERR = 2'b10;
localparam integer P_PROTECTION = 1;
localparam integer P_CONVERSION = 2;
wire s_awvalid_i;
wire s_arvalid_i;
wire s_wvalid_i ;
wire s_bready_i ;
wire s_rready_i ;
wire s_awready_i;
wire s_wready_i;
wire s_bvalid_i;
wire [C_AXI_ID_WIDTH-1:0] s_bid_i;
wire [1:0] s_bresp_i;
wire [C_AXI_BUSER_WIDTH-1:0] s_buser_i;
wire s_arready_i;
wire s_rvalid_i;
wire [C_AXI_ID_WIDTH-1:0] s_rid_i;
wire [1:0] s_rresp_i;
wire [C_AXI_RUSER_WIDTH-1:0] s_ruser_i;
wire [C_AXI_DATA_WIDTH-1:0] s_rdata_i;
wire s_rlast_i;
generate
if ((C_M_AXI_PROTOCOL == P_AXILITE) || (C_S_AXI_PROTOCOL == P_AXILITE)) begin : gen_axilite
assign m_axi_awid = 0;
assign m_axi_awlen = 0;
assign m_axi_awsize = P_AXILITE_SIZE;
assign m_axi_awburst = P_INCR;
assign m_axi_awlock = 0;
assign m_axi_awcache = 0;
assign m_axi_awregion = 0;
assign m_axi_awqos = 0;
assign m_axi_awuser = 0;
assign m_axi_wid = 0;
assign m_axi_wlast = 1'b1;
assign m_axi_wuser = 0;
assign m_axi_arid = 0;
assign m_axi_arlen = 0;
assign m_axi_arsize = P_AXILITE_SIZE;
assign m_axi_arburst = P_INCR;
assign m_axi_arlock = 0;
assign m_axi_arcache = 0;
assign m_axi_arregion = 0;
assign m_axi_arqos = 0;
assign m_axi_aruser = 0;
if (((C_IGNORE_ID == 1) && (C_TRANSLATION_MODE != P_CONVERSION)) || (C_S_AXI_PROTOCOL == P_AXILITE)) begin : gen_axilite_passthru
assign m_axi_awaddr = s_axi_awaddr;
assign m_axi_awprot = s_axi_awprot;
assign m_axi_awvalid = s_awvalid_i;
assign s_awready_i = m_axi_awready;
assign m_axi_wdata = s_axi_wdata;
assign m_axi_wstrb = s_axi_wstrb;
assign m_axi_wvalid = s_wvalid_i;
assign s_wready_i = m_axi_wready;
assign s_bid_i = 0;
assign s_bresp_i = m_axi_bresp;
assign s_buser_i = 0;
assign s_bvalid_i = m_axi_bvalid;
assign m_axi_bready = s_bready_i;
assign m_axi_araddr = s_axi_araddr;
assign m_axi_arprot = s_axi_arprot;
assign m_axi_arvalid = s_arvalid_i;
assign s_arready_i = m_axi_arready;
assign s_rid_i = 0;
assign s_rdata_i = m_axi_rdata;
assign s_rresp_i = m_axi_rresp;
assign s_rlast_i = 1'b1;
assign s_ruser_i = 0;
assign s_rvalid_i = m_axi_rvalid;
assign m_axi_rready = s_rready_i;
end else if (C_TRANSLATION_MODE == P_CONVERSION) begin : gen_b2s_conv
assign s_buser_i = {C_AXI_BUSER_WIDTH{1'b0}};
assign s_ruser_i = {C_AXI_RUSER_WIDTH{1'b0}};
axi_protocol_converter_v2_1_b2s #(
.C_S_AXI_PROTOCOL (C_S_AXI_PROTOCOL),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_ADDR_WIDTH (C_AXI_ADDR_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_SUPPORTS_WRITE (C_AXI_SUPPORTS_WRITE),
.C_AXI_SUPPORTS_READ (C_AXI_SUPPORTS_READ)
) axilite_b2s (
.aresetn (aresetn),
.aclk (aclk),
.s_axi_awid (s_axi_awid),
.s_axi_awaddr (s_axi_awaddr),
.s_axi_awlen (s_axi_awlen),
.s_axi_awsize (s_axi_awsize),
.s_axi_awburst (s_axi_awburst),
.s_axi_awprot (s_axi_awprot),
.s_axi_awvalid (s_awvalid_i),
.s_axi_awready (s_awready_i),
.s_axi_wdata (s_axi_wdata),
.s_axi_wstrb (s_axi_wstrb),
.s_axi_wlast (s_axi_wlast),
.s_axi_wvalid (s_wvalid_i),
.s_axi_wready (s_wready_i),
.s_axi_bid (s_bid_i),
.s_axi_bresp (s_bresp_i),
.s_axi_bvalid (s_bvalid_i),
.s_axi_bready (s_bready_i),
.s_axi_arid (s_axi_arid),
.s_axi_araddr (s_axi_araddr),
.s_axi_arlen (s_axi_arlen),
.s_axi_arsize (s_axi_arsize),
.s_axi_arburst (s_axi_arburst),
.s_axi_arprot (s_axi_arprot),
.s_axi_arvalid (s_arvalid_i),
.s_axi_arready (s_arready_i),
.s_axi_rid (s_rid_i),
.s_axi_rdata (s_rdata_i),
.s_axi_rresp (s_rresp_i),
.s_axi_rlast (s_rlast_i),
.s_axi_rvalid (s_rvalid_i),
.s_axi_rready (s_rready_i),
.m_axi_awaddr (m_axi_awaddr),
.m_axi_awprot (m_axi_awprot),
.m_axi_awvalid (m_axi_awvalid),
.m_axi_awready (m_axi_awready),
.m_axi_wdata (m_axi_wdata),
.m_axi_wstrb (m_axi_wstrb),
.m_axi_wvalid (m_axi_wvalid),
.m_axi_wready (m_axi_wready),
.m_axi_bresp (m_axi_bresp),
.m_axi_bvalid (m_axi_bvalid),
.m_axi_bready (m_axi_bready),
.m_axi_araddr (m_axi_araddr),
.m_axi_arprot (m_axi_arprot),
.m_axi_arvalid (m_axi_arvalid),
.m_axi_arready (m_axi_arready),
.m_axi_rdata (m_axi_rdata),
.m_axi_rresp (m_axi_rresp),
.m_axi_rvalid (m_axi_rvalid),
.m_axi_rready (m_axi_rready)
);
end else begin : gen_axilite_conv
axi_protocol_converter_v2_1_axilite_conv #(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_ADDR_WIDTH (C_AXI_ADDR_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_SUPPORTS_WRITE (C_AXI_SUPPORTS_WRITE),
.C_AXI_SUPPORTS_READ (C_AXI_SUPPORTS_READ),
.C_AXI_RUSER_WIDTH (C_AXI_RUSER_WIDTH),
.C_AXI_BUSER_WIDTH (C_AXI_BUSER_WIDTH)
) axilite_conv_inst (
.ARESETN (aresetn),
.ACLK (aclk),
.S_AXI_AWID (s_axi_awid),
.S_AXI_AWADDR (s_axi_awaddr),
.S_AXI_AWPROT (s_axi_awprot),
.S_AXI_AWVALID (s_awvalid_i),
.S_AXI_AWREADY (s_awready_i),
.S_AXI_WDATA (s_axi_wdata),
.S_AXI_WSTRB (s_axi_wstrb),
.S_AXI_WVALID (s_wvalid_i),
.S_AXI_WREADY (s_wready_i),
.S_AXI_BID (s_bid_i),
.S_AXI_BRESP (s_bresp_i),
.S_AXI_BUSER (s_buser_i),
.S_AXI_BVALID (s_bvalid_i),
.S_AXI_BREADY (s_bready_i),
.S_AXI_ARID (s_axi_arid),
.S_AXI_ARADDR (s_axi_araddr),
.S_AXI_ARPROT (s_axi_arprot),
.S_AXI_ARVALID (s_arvalid_i),
.S_AXI_ARREADY (s_arready_i),
.S_AXI_RID (s_rid_i),
.S_AXI_RDATA (s_rdata_i),
.S_AXI_RRESP (s_rresp_i),
.S_AXI_RLAST (s_rlast_i),
.S_AXI_RUSER (s_ruser_i),
.S_AXI_RVALID (s_rvalid_i),
.S_AXI_RREADY (s_rready_i),
.M_AXI_AWADDR (m_axi_awaddr),
.M_AXI_AWPROT (m_axi_awprot),
.M_AXI_AWVALID (m_axi_awvalid),
.M_AXI_AWREADY (m_axi_awready),
.M_AXI_WDATA (m_axi_wdata),
.M_AXI_WSTRB (m_axi_wstrb),
.M_AXI_WVALID (m_axi_wvalid),
.M_AXI_WREADY (m_axi_wready),
.M_AXI_BRESP (m_axi_bresp),
.M_AXI_BVALID (m_axi_bvalid),
.M_AXI_BREADY (m_axi_bready),
.M_AXI_ARADDR (m_axi_araddr),
.M_AXI_ARPROT (m_axi_arprot),
.M_AXI_ARVALID (m_axi_arvalid),
.M_AXI_ARREADY (m_axi_arready),
.M_AXI_RDATA (m_axi_rdata),
.M_AXI_RRESP (m_axi_rresp),
.M_AXI_RVALID (m_axi_rvalid),
.M_AXI_RREADY (m_axi_rready)
);
end
end else if ((C_M_AXI_PROTOCOL == P_AXI3) && (C_S_AXI_PROTOCOL == P_AXI4)) begin : gen_axi4_axi3
axi_protocol_converter_v2_1_axi3_conv #(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_ADDR_WIDTH (C_AXI_ADDR_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_SUPPORTS_USER_SIGNALS (C_AXI_SUPPORTS_USER_SIGNALS),
.C_AXI_AWUSER_WIDTH (C_AXI_AWUSER_WIDTH),
.C_AXI_ARUSER_WIDTH (C_AXI_ARUSER_WIDTH),
.C_AXI_WUSER_WIDTH (C_AXI_WUSER_WIDTH),
.C_AXI_RUSER_WIDTH (C_AXI_RUSER_WIDTH),
.C_AXI_BUSER_WIDTH (C_AXI_BUSER_WIDTH),
.C_AXI_SUPPORTS_WRITE (C_AXI_SUPPORTS_WRITE),
.C_AXI_SUPPORTS_READ (C_AXI_SUPPORTS_READ),
.C_SUPPORT_SPLITTING ((C_TRANSLATION_MODE == P_CONVERSION) ? 1 : 0)
) axi3_conv_inst (
.ARESETN (aresetn),
.ACLK (aclk),
.S_AXI_AWID (s_axi_awid),
.S_AXI_AWADDR (s_axi_awaddr),
.S_AXI_AWLEN (s_axi_awlen),
.S_AXI_AWSIZE (s_axi_awsize),
.S_AXI_AWBURST (s_axi_awburst),
.S_AXI_AWLOCK (s_axi_awlock),
.S_AXI_AWCACHE (s_axi_awcache),
.S_AXI_AWPROT (s_axi_awprot),
.S_AXI_AWQOS (s_axi_awqos),
.S_AXI_AWUSER (s_axi_awuser),
.S_AXI_AWVALID (s_awvalid_i),
.S_AXI_AWREADY (s_awready_i),
.S_AXI_WDATA (s_axi_wdata),
.S_AXI_WSTRB (s_axi_wstrb),
.S_AXI_WLAST (s_axi_wlast),
.S_AXI_WUSER (s_axi_wuser),
.S_AXI_WVALID (s_wvalid_i),
.S_AXI_WREADY (s_wready_i),
.S_AXI_BID (s_bid_i),
.S_AXI_BRESP (s_bresp_i),
.S_AXI_BUSER (s_buser_i),
.S_AXI_BVALID (s_bvalid_i),
.S_AXI_BREADY (s_bready_i),
.S_AXI_ARID (s_axi_arid),
.S_AXI_ARADDR (s_axi_araddr),
.S_AXI_ARLEN (s_axi_arlen),
.S_AXI_ARSIZE (s_axi_arsize),
.S_AXI_ARBURST (s_axi_arburst),
.S_AXI_ARLOCK (s_axi_arlock),
.S_AXI_ARCACHE (s_axi_arcache),
.S_AXI_ARPROT (s_axi_arprot),
.S_AXI_ARQOS (s_axi_arqos),
.S_AXI_ARUSER (s_axi_aruser),
.S_AXI_ARVALID (s_arvalid_i),
.S_AXI_ARREADY (s_arready_i),
.S_AXI_RID (s_rid_i),
.S_AXI_RDATA (s_rdata_i),
.S_AXI_RRESP (s_rresp_i),
.S_AXI_RLAST (s_rlast_i),
.S_AXI_RUSER (s_ruser_i),
.S_AXI_RVALID (s_rvalid_i),
.S_AXI_RREADY (s_rready_i),
.M_AXI_AWID (m_axi_awid),
.M_AXI_AWADDR (m_axi_awaddr),
.M_AXI_AWLEN (m_axi_awlen),
.M_AXI_AWSIZE (m_axi_awsize),
.M_AXI_AWBURST (m_axi_awburst),
.M_AXI_AWLOCK (m_axi_awlock),
.M_AXI_AWCACHE (m_axi_awcache),
.M_AXI_AWPROT (m_axi_awprot),
.M_AXI_AWQOS (m_axi_awqos),
.M_AXI_AWUSER (m_axi_awuser),
.M_AXI_AWVALID (m_axi_awvalid),
.M_AXI_AWREADY (m_axi_awready),
.M_AXI_WID (m_axi_wid),
.M_AXI_WDATA (m_axi_wdata),
.M_AXI_WSTRB (m_axi_wstrb),
.M_AXI_WLAST (m_axi_wlast),
.M_AXI_WUSER (m_axi_wuser),
.M_AXI_WVALID (m_axi_wvalid),
.M_AXI_WREADY (m_axi_wready),
.M_AXI_BID (m_axi_bid),
.M_AXI_BRESP (m_axi_bresp),
.M_AXI_BUSER (m_axi_buser),
.M_AXI_BVALID (m_axi_bvalid),
.M_AXI_BREADY (m_axi_bready),
.M_AXI_ARID (m_axi_arid),
.M_AXI_ARADDR (m_axi_araddr),
.M_AXI_ARLEN (m_axi_arlen),
.M_AXI_ARSIZE (m_axi_arsize),
.M_AXI_ARBURST (m_axi_arburst),
.M_AXI_ARLOCK (m_axi_arlock),
.M_AXI_ARCACHE (m_axi_arcache),
.M_AXI_ARPROT (m_axi_arprot),
.M_AXI_ARQOS (m_axi_arqos),
.M_AXI_ARUSER (m_axi_aruser),
.M_AXI_ARVALID (m_axi_arvalid),
.M_AXI_ARREADY (m_axi_arready),
.M_AXI_RID (m_axi_rid),
.M_AXI_RDATA (m_axi_rdata),
.M_AXI_RRESP (m_axi_rresp),
.M_AXI_RLAST (m_axi_rlast),
.M_AXI_RUSER (m_axi_ruser),
.M_AXI_RVALID (m_axi_rvalid),
.M_AXI_RREADY (m_axi_rready)
);
assign m_axi_awregion = 0;
assign m_axi_arregion = 0;
end else if ((C_S_AXI_PROTOCOL == P_AXI3) && (C_M_AXI_PROTOCOL == P_AXI4)) begin : gen_axi3_axi4
assign m_axi_awid = s_axi_awid;
assign m_axi_awaddr = s_axi_awaddr;
assign m_axi_awlen = {4'h0, s_axi_awlen[3:0]};
assign m_axi_awsize = s_axi_awsize;
assign m_axi_awburst = s_axi_awburst;
assign m_axi_awlock = s_axi_awlock[0];
assign m_axi_awcache = s_axi_awcache;
assign m_axi_awprot = s_axi_awprot;
assign m_axi_awregion = 4'h0;
assign m_axi_awqos = s_axi_awqos;
assign m_axi_awuser = s_axi_awuser;
assign m_axi_awvalid = s_awvalid_i;
assign s_awready_i = m_axi_awready;
assign m_axi_wid = {C_AXI_ID_WIDTH{1'b0}} ;
assign m_axi_wdata = s_axi_wdata;
assign m_axi_wstrb = s_axi_wstrb;
assign m_axi_wlast = s_axi_wlast;
assign m_axi_wuser = s_axi_wuser;
assign m_axi_wvalid = s_wvalid_i;
assign s_wready_i = m_axi_wready;
assign s_bid_i = m_axi_bid;
assign s_bresp_i = m_axi_bresp;
assign s_buser_i = m_axi_buser;
assign s_bvalid_i = m_axi_bvalid;
assign m_axi_bready = s_bready_i;
assign m_axi_arid = s_axi_arid;
assign m_axi_araddr = s_axi_araddr;
assign m_axi_arlen = {4'h0, s_axi_arlen[3:0]};
assign m_axi_arsize = s_axi_arsize;
assign m_axi_arburst = s_axi_arburst;
assign m_axi_arlock = s_axi_arlock[0];
assign m_axi_arcache = s_axi_arcache;
assign m_axi_arprot = s_axi_arprot;
assign m_axi_arregion = 4'h0;
assign m_axi_arqos = s_axi_arqos;
assign m_axi_aruser = s_axi_aruser;
assign m_axi_arvalid = s_arvalid_i;
assign s_arready_i = m_axi_arready;
assign s_rid_i = m_axi_rid;
assign s_rdata_i = m_axi_rdata;
assign s_rresp_i = m_axi_rresp;
assign s_rlast_i = m_axi_rlast;
assign s_ruser_i = m_axi_ruser;
assign s_rvalid_i = m_axi_rvalid;
assign m_axi_rready = s_rready_i;
end else begin :gen_no_conv
assign m_axi_awid = s_axi_awid;
assign m_axi_awaddr = s_axi_awaddr;
assign m_axi_awlen = s_axi_awlen;
assign m_axi_awsize = s_axi_awsize;
assign m_axi_awburst = s_axi_awburst;
assign m_axi_awlock = s_axi_awlock;
assign m_axi_awcache = s_axi_awcache;
assign m_axi_awprot = s_axi_awprot;
assign m_axi_awregion = s_axi_awregion;
assign m_axi_awqos = s_axi_awqos;
assign m_axi_awuser = s_axi_awuser;
assign m_axi_awvalid = s_awvalid_i;
assign s_awready_i = m_axi_awready;
assign m_axi_wid = s_axi_wid;
assign m_axi_wdata = s_axi_wdata;
assign m_axi_wstrb = s_axi_wstrb;
assign m_axi_wlast = s_axi_wlast;
assign m_axi_wuser = s_axi_wuser;
assign m_axi_wvalid = s_wvalid_i;
assign s_wready_i = m_axi_wready;
assign s_bid_i = m_axi_bid;
assign s_bresp_i = m_axi_bresp;
assign s_buser_i = m_axi_buser;
assign s_bvalid_i = m_axi_bvalid;
assign m_axi_bready = s_bready_i;
assign m_axi_arid = s_axi_arid;
assign m_axi_araddr = s_axi_araddr;
assign m_axi_arlen = s_axi_arlen;
assign m_axi_arsize = s_axi_arsize;
assign m_axi_arburst = s_axi_arburst;
assign m_axi_arlock = s_axi_arlock;
assign m_axi_arcache = s_axi_arcache;
assign m_axi_arprot = s_axi_arprot;
assign m_axi_arregion = s_axi_arregion;
assign m_axi_arqos = s_axi_arqos;
assign m_axi_aruser = s_axi_aruser;
assign m_axi_arvalid = s_arvalid_i;
assign s_arready_i = m_axi_arready;
assign s_rid_i = m_axi_rid;
assign s_rdata_i = m_axi_rdata;
assign s_rresp_i = m_axi_rresp;
assign s_rlast_i = m_axi_rlast;
assign s_ruser_i = m_axi_ruser;
assign s_rvalid_i = m_axi_rvalid;
assign m_axi_rready = s_rready_i;
end
if ((C_TRANSLATION_MODE == P_PROTECTION) &&
(((C_S_AXI_PROTOCOL != P_AXILITE) && (C_M_AXI_PROTOCOL == P_AXILITE)) ||
((C_S_AXI_PROTOCOL == P_AXI4) && (C_M_AXI_PROTOCOL == P_AXI3)))) begin : gen_err_detect
wire e_awvalid;
reg e_awvalid_r;
wire e_arvalid;
reg e_arvalid_r;
wire e_wvalid;
wire e_bvalid;
wire e_rvalid;
reg e_awready;
reg e_arready;
wire e_wready;
reg [C_AXI_ID_WIDTH-1:0] e_awid;
reg [C_AXI_ID_WIDTH-1:0] e_arid;
reg [8-1:0] e_arlen;
wire [C_AXI_ID_WIDTH-1:0] e_bid;
wire [C_AXI_ID_WIDTH-1:0] e_rid;
wire e_rlast;
wire w_err;
wire r_err;
wire busy_aw;
wire busy_w;
wire busy_ar;
wire aw_push;
wire aw_pop;
wire w_pop;
wire ar_push;
wire ar_pop;
reg s_awvalid_pending;
reg s_awvalid_en;
reg s_arvalid_en;
reg s_awready_en;
reg s_arready_en;
reg [4:0] aw_cnt;
reg [4:0] ar_cnt;
reg [4:0] w_cnt;
reg w_borrow;
reg err_busy_w;
reg err_busy_r;
assign w_err = (C_M_AXI_PROTOCOL == P_AXILITE) ? (s_axi_awlen != 0) : ((s_axi_awlen>>4) != 0);
assign r_err = (C_M_AXI_PROTOCOL == P_AXILITE) ? (s_axi_arlen != 0) : ((s_axi_arlen>>4) != 0);
assign s_awvalid_i = s_axi_awvalid & s_awvalid_en & ~w_err;
assign e_awvalid = e_awvalid_r & ~busy_aw & ~busy_w;
assign s_arvalid_i = s_axi_arvalid & s_arvalid_en & ~r_err;
assign e_arvalid = e_arvalid_r & ~busy_ar ;
assign s_wvalid_i = s_axi_wvalid & (busy_w | (s_awvalid_pending & ~w_borrow));
assign e_wvalid = s_axi_wvalid & err_busy_w;
assign s_bready_i = s_axi_bready & busy_aw;
assign s_rready_i = s_axi_rready & busy_ar;
assign s_axi_awready = (s_awready_i & s_awready_en) | e_awready;
assign s_axi_wready = (s_wready_i & (busy_w | (s_awvalid_pending & ~w_borrow))) | e_wready;
assign s_axi_bvalid = (s_bvalid_i & busy_aw) | e_bvalid;
assign s_axi_bid = err_busy_w ? e_bid : s_bid_i;
assign s_axi_bresp = err_busy_w ? P_SLVERR : s_bresp_i;
assign s_axi_buser = err_busy_w ? {C_AXI_BUSER_WIDTH{1'b0}} : s_buser_i;
assign s_axi_arready = (s_arready_i & s_arready_en) | e_arready;
assign s_axi_rvalid = (s_rvalid_i & busy_ar) | e_rvalid;
assign s_axi_rid = err_busy_r ? e_rid : s_rid_i;
assign s_axi_rresp = err_busy_r ? P_SLVERR : s_rresp_i;
assign s_axi_ruser = err_busy_r ? {C_AXI_RUSER_WIDTH{1'b0}} : s_ruser_i;
assign s_axi_rdata = err_busy_r ? {C_AXI_DATA_WIDTH{1'b0}} : s_rdata_i;
assign s_axi_rlast = err_busy_r ? e_rlast : s_rlast_i;
assign busy_aw = (aw_cnt != 0);
assign busy_w = (w_cnt != 0);
assign busy_ar = (ar_cnt != 0);
assign aw_push = s_awvalid_i & s_awready_i & s_awready_en;
assign aw_pop = s_bvalid_i & s_bready_i;
assign w_pop = s_wvalid_i & s_wready_i & s_axi_wlast;
assign ar_push = s_arvalid_i & s_arready_i & s_arready_en;
assign ar_pop = s_rvalid_i & s_rready_i & s_rlast_i;
always @(posedge aclk) begin
if (~aresetn) begin
s_awvalid_en <= 1'b0;
s_arvalid_en <= 1'b0;
s_awready_en <= 1'b0;
s_arready_en <= 1'b0;
e_awvalid_r <= 1'b0;
e_arvalid_r <= 1'b0;
e_awready <= 1'b0;
e_arready <= 1'b0;
aw_cnt <= 0;
w_cnt <= 0;
ar_cnt <= 0;
err_busy_w <= 1'b0;
err_busy_r <= 1'b0;
w_borrow <= 1'b0;
s_awvalid_pending <= 1'b0;
end else begin
e_awready <= 1'b0; // One-cycle pulse
if (e_bvalid & s_axi_bready) begin
s_awvalid_en <= 1'b1;
s_awready_en <= 1'b1;
err_busy_w <= 1'b0;
end else if (e_awvalid) begin
e_awvalid_r <= 1'b0;
err_busy_w <= 1'b1;
end else if (s_axi_awvalid & w_err & ~e_awvalid_r & ~err_busy_w) begin
e_awvalid_r <= 1'b1;
e_awready <= ~(s_awready_i & s_awvalid_en); // 1-cycle pulse if awready not already asserted
s_awvalid_en <= 1'b0;
s_awready_en <= 1'b0;
end else if ((&aw_cnt) | (&w_cnt) | aw_push) begin
s_awvalid_en <= 1'b0;
s_awready_en <= 1'b0;
end else if (~err_busy_w & ~e_awvalid_r & ~(s_axi_awvalid & w_err)) begin
s_awvalid_en <= 1'b1;
s_awready_en <= 1'b1;
end
if (aw_push & ~aw_pop) begin
aw_cnt <= aw_cnt + 1;
end else if (~aw_push & aw_pop & (|aw_cnt)) begin
aw_cnt <= aw_cnt - 1;
end
if (aw_push) begin
if (~w_pop & ~w_borrow) begin
w_cnt <= w_cnt + 1;
end
w_borrow <= 1'b0;
end else if (~aw_push & w_pop) begin
if (|w_cnt) begin
w_cnt <= w_cnt - 1;
end else begin
w_borrow <= 1'b1;
end
end
s_awvalid_pending <= s_awvalid_i & ~s_awready_i;
e_arready <= 1'b0; // One-cycle pulse
if (e_rvalid & s_axi_rready & e_rlast) begin
s_arvalid_en <= 1'b1;
s_arready_en <= 1'b1;
err_busy_r <= 1'b0;
end else if (e_arvalid) begin
e_arvalid_r <= 1'b0;
err_busy_r <= 1'b1;
end else if (s_axi_arvalid & r_err & ~e_arvalid_r & ~err_busy_r) begin
e_arvalid_r <= 1'b1;
e_arready <= ~(s_arready_i & s_arvalid_en); // 1-cycle pulse if arready not already asserted
s_arvalid_en <= 1'b0;
s_arready_en <= 1'b0;
end else if ((&ar_cnt) | ar_push) begin
s_arvalid_en <= 1'b0;
s_arready_en <= 1'b0;
end else if (~err_busy_r & ~e_arvalid_r & ~(s_axi_arvalid & r_err)) begin
s_arvalid_en <= 1'b1;
s_arready_en <= 1'b1;
end
if (ar_push & ~ar_pop) begin
ar_cnt <= ar_cnt + 1;
end else if (~ar_push & ar_pop & (|ar_cnt)) begin
ar_cnt <= ar_cnt - 1;
end
end
end
always @(posedge aclk) begin
if (s_axi_awvalid & ~err_busy_w & ~e_awvalid_r ) begin
e_awid <= s_axi_awid;
end
if (s_axi_arvalid & ~err_busy_r & ~e_arvalid_r ) begin
e_arid <= s_axi_arid;
e_arlen <= s_axi_arlen;
end
end
axi_protocol_converter_v2_1_decerr_slave #
(
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_RUSER_WIDTH (C_AXI_RUSER_WIDTH),
.C_AXI_BUSER_WIDTH (C_AXI_BUSER_WIDTH),
.C_AXI_PROTOCOL (C_S_AXI_PROTOCOL),
.C_RESP (P_SLVERR),
.C_IGNORE_ID (C_IGNORE_ID)
)
decerr_slave_inst
(
.ACLK (aclk),
.ARESETN (aresetn),
.S_AXI_AWID (e_awid),
.S_AXI_AWVALID (e_awvalid),
.S_AXI_AWREADY (),
.S_AXI_WLAST (s_axi_wlast),
.S_AXI_WVALID (e_wvalid),
.S_AXI_WREADY (e_wready),
.S_AXI_BID (e_bid),
.S_AXI_BRESP (),
.S_AXI_BUSER (),
.S_AXI_BVALID (e_bvalid),
.S_AXI_BREADY (s_axi_bready),
.S_AXI_ARID (e_arid),
.S_AXI_ARLEN (e_arlen),
.S_AXI_ARVALID (e_arvalid),
.S_AXI_ARREADY (),
.S_AXI_RID (e_rid),
.S_AXI_RDATA (),
.S_AXI_RRESP (),
.S_AXI_RUSER (),
.S_AXI_RLAST (e_rlast),
.S_AXI_RVALID (e_rvalid),
.S_AXI_RREADY (s_axi_rready)
);
end else begin : gen_no_err_detect
assign s_awvalid_i = s_axi_awvalid;
assign s_arvalid_i = s_axi_arvalid;
assign s_wvalid_i = s_axi_wvalid;
assign s_bready_i = s_axi_bready;
assign s_rready_i = s_axi_rready;
assign s_axi_awready = s_awready_i;
assign s_axi_wready = s_wready_i;
assign s_axi_bvalid = s_bvalid_i;
assign s_axi_bid = s_bid_i;
assign s_axi_bresp = s_bresp_i;
assign s_axi_buser = s_buser_i;
assign s_axi_arready = s_arready_i;
assign s_axi_rvalid = s_rvalid_i;
assign s_axi_rid = s_rid_i;
assign s_axi_rresp = s_rresp_i;
assign s_axi_ruser = s_ruser_i;
assign s_axi_rdata = s_rdata_i;
assign s_axi_rlast = s_rlast_i;
end // gen_err_detect
endgenerate
endmodule
`default_nettype wire
|
// -- (c) Copyright 2012 -2013 Xilinx, Inc. All rights reserved.
// --
// -- This file contains confidential and proprietary information
// -- of Xilinx, Inc. and is protected under U.S. and
// -- international copyright and other intellectual property
// -- laws.
// --
// -- DISCLAIMER
// -- This disclaimer is not a license and does not grant any
// -- rights to the materials distributed herewith. Except as
// -- otherwise provided in a valid license issued to you by
// -- Xilinx, and to the maximum extent permitted by applicable
// -- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// -- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// -- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// -- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// -- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// -- (2) Xilinx shall not be liable (whether in contract or tort,
// -- including negligence, or under any other theory of
// -- liability) for any loss or damage of any kind or nature
// -- related to, arising under or in connection with these
// -- materials, including for any direct, or any indirect,
// -- special, incidental, or consequential loss or damage
// -- (including loss of data, profits, goodwill, or any type of
// -- loss or damage suffered as a result of any action brought
// -- by a third party) even if such damage or loss was
// -- reasonably foreseeable or Xilinx had been advised of the
// -- possibility of the same.
// --
// -- CRITICAL APPLICATIONS
// -- Xilinx products are not designed or intended to be fail-
// -- safe, or for use in any application requiring fail-safe
// -- performance, such as life-support or safety devices or
// -- systems, Class III medical devices, nuclear facilities,
// -- applications related to the deployment of airbags, or any
// -- other applications that could lead to death, personal
// -- injury, or severe property or environmental damage
// -- (individually and collectively, "Critical
// -- Applications"). Customer assumes the sole risk and
// -- liability of any use of Xilinx products in Critical
// -- Applications, subject only to applicable laws and
// -- regulations governing limitations on product liability.
// --
// -- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// -- PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
//
// File name: axi_protocol_converter.v
//
// Description:
// This module is a bank of AXI4-Lite and AXI3 protocol converters for a vectored AXI interface.
// The interface of this module consists of a vectored slave and master interface
// which are each concatenations of upper-level AXI pathways,
// plus various vectored parameters.
// This module instantiates a set of individual protocol converter modules.
//
//-----------------------------------------------------------------------------
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_axi_protocol_converter #(
parameter C_FAMILY = "virtex6",
parameter integer C_M_AXI_PROTOCOL = 0,
parameter integer C_S_AXI_PROTOCOL = 0,
parameter integer C_IGNORE_ID = 0,
// 0 = RID/BID are stored by axilite_conv.
// 1 = RID/BID have already been stored in an upstream device, like SASD crossbar.
parameter integer C_AXI_ID_WIDTH = 4,
parameter integer C_AXI_ADDR_WIDTH = 32,
parameter integer C_AXI_DATA_WIDTH = 32,
parameter integer C_AXI_SUPPORTS_WRITE = 1,
parameter integer C_AXI_SUPPORTS_READ = 1,
parameter integer C_AXI_SUPPORTS_USER_SIGNALS = 0,
// 1 = Propagate all USER signals, 0 = Dont propagate.
parameter integer C_AXI_AWUSER_WIDTH = 1,
parameter integer C_AXI_ARUSER_WIDTH = 1,
parameter integer C_AXI_WUSER_WIDTH = 1,
parameter integer C_AXI_RUSER_WIDTH = 1,
parameter integer C_AXI_BUSER_WIDTH = 1,
parameter integer C_TRANSLATION_MODE = 1
// 0 (Unprotected) = Disable all error checking; master is well-behaved.
// 1 (Protection) = Detect SI transaction violations, but perform no splitting.
// AXI4 -> AXI3 must be <= 16 beats; AXI4/3 -> AXI4LITE must be single.
// 2 (Conversion) = Include transaction splitting logic
) (
// Global Signals
input wire aclk,
input wire aresetn,
// Slave Interface Write Address Ports
input wire [C_AXI_ID_WIDTH-1:0] s_axi_awid,
input wire [C_AXI_ADDR_WIDTH-1:0] s_axi_awaddr,
input wire [((C_S_AXI_PROTOCOL == 1) ? 4 : 8)-1:0] s_axi_awlen,
input wire [3-1:0] s_axi_awsize,
input wire [2-1:0] s_axi_awburst,
input wire [((C_S_AXI_PROTOCOL == 1) ? 2 : 1)-1:0] s_axi_awlock,
input wire [4-1:0] s_axi_awcache,
input wire [3-1:0] s_axi_awprot,
input wire [4-1:0] s_axi_awregion,
input wire [4-1:0] s_axi_awqos,
input wire [C_AXI_AWUSER_WIDTH-1:0] s_axi_awuser,
input wire s_axi_awvalid,
output wire s_axi_awready,
// Slave Interface Write Data Ports
input wire [C_AXI_ID_WIDTH-1:0] s_axi_wid,
input wire [C_AXI_DATA_WIDTH-1:0] s_axi_wdata,
input wire [C_AXI_DATA_WIDTH/8-1:0] s_axi_wstrb,
input wire s_axi_wlast,
input wire [C_AXI_WUSER_WIDTH-1:0] s_axi_wuser,
input wire s_axi_wvalid,
output wire s_axi_wready,
// Slave Interface Write Response Ports
output wire [C_AXI_ID_WIDTH-1:0] s_axi_bid,
output wire [2-1:0] s_axi_bresp,
output wire [C_AXI_BUSER_WIDTH-1:0] s_axi_buser,
output wire s_axi_bvalid,
input wire s_axi_bready,
// Slave Interface Read Address Ports
input wire [C_AXI_ID_WIDTH-1:0] s_axi_arid,
input wire [C_AXI_ADDR_WIDTH-1:0] s_axi_araddr,
input wire [((C_S_AXI_PROTOCOL == 1) ? 4 : 8)-1:0] s_axi_arlen,
input wire [3-1:0] s_axi_arsize,
input wire [2-1:0] s_axi_arburst,
input wire [((C_S_AXI_PROTOCOL == 1) ? 2 : 1)-1:0] s_axi_arlock,
input wire [4-1:0] s_axi_arcache,
input wire [3-1:0] s_axi_arprot,
input wire [4-1:0] s_axi_arregion,
input wire [4-1:0] s_axi_arqos,
input wire [C_AXI_ARUSER_WIDTH-1:0] s_axi_aruser,
input wire s_axi_arvalid,
output wire s_axi_arready,
// Slave Interface Read Data Ports
output wire [C_AXI_ID_WIDTH-1:0] s_axi_rid,
output wire [C_AXI_DATA_WIDTH-1:0] s_axi_rdata,
output wire [2-1:0] s_axi_rresp,
output wire s_axi_rlast,
output wire [C_AXI_RUSER_WIDTH-1:0] s_axi_ruser,
output wire s_axi_rvalid,
input wire s_axi_rready,
// Master Interface Write Address Port
output wire [C_AXI_ID_WIDTH-1:0] m_axi_awid,
output wire [C_AXI_ADDR_WIDTH-1:0] m_axi_awaddr,
output wire [((C_M_AXI_PROTOCOL == 1) ? 4 : 8)-1:0] m_axi_awlen,
output wire [3-1:0] m_axi_awsize,
output wire [2-1:0] m_axi_awburst,
output wire [((C_M_AXI_PROTOCOL == 1) ? 2 : 1)-1:0] m_axi_awlock,
output wire [4-1:0] m_axi_awcache,
output wire [3-1:0] m_axi_awprot,
output wire [4-1:0] m_axi_awregion,
output wire [4-1:0] m_axi_awqos,
output wire [C_AXI_AWUSER_WIDTH-1:0] m_axi_awuser,
output wire m_axi_awvalid,
input wire m_axi_awready,
// Master Interface Write Data Ports
output wire [C_AXI_ID_WIDTH-1:0] m_axi_wid,
output wire [C_AXI_DATA_WIDTH-1:0] m_axi_wdata,
output wire [C_AXI_DATA_WIDTH/8-1:0] m_axi_wstrb,
output wire m_axi_wlast,
output wire [C_AXI_WUSER_WIDTH-1:0] m_axi_wuser,
output wire m_axi_wvalid,
input wire m_axi_wready,
// Master Interface Write Response Ports
input wire [C_AXI_ID_WIDTH-1:0] m_axi_bid,
input wire [2-1:0] m_axi_bresp,
input wire [C_AXI_BUSER_WIDTH-1:0] m_axi_buser,
input wire m_axi_bvalid,
output wire m_axi_bready,
// Master Interface Read Address Port
output wire [C_AXI_ID_WIDTH-1:0] m_axi_arid,
output wire [C_AXI_ADDR_WIDTH-1:0] m_axi_araddr,
output wire [((C_M_AXI_PROTOCOL == 1) ? 4 : 8)-1:0] m_axi_arlen,
output wire [3-1:0] m_axi_arsize,
output wire [2-1:0] m_axi_arburst,
output wire [((C_M_AXI_PROTOCOL == 1) ? 2 : 1)-1:0] m_axi_arlock,
output wire [4-1:0] m_axi_arcache,
output wire [3-1:0] m_axi_arprot,
output wire [4-1:0] m_axi_arregion,
output wire [4-1:0] m_axi_arqos,
output wire [C_AXI_ARUSER_WIDTH-1:0] m_axi_aruser,
output wire m_axi_arvalid,
input wire m_axi_arready,
// Master Interface Read Data Ports
input wire [C_AXI_ID_WIDTH-1:0] m_axi_rid,
input wire [C_AXI_DATA_WIDTH-1:0] m_axi_rdata,
input wire [2-1:0] m_axi_rresp,
input wire m_axi_rlast,
input wire [C_AXI_RUSER_WIDTH-1:0] m_axi_ruser,
input wire m_axi_rvalid,
output wire m_axi_rready
);
localparam P_AXI4 = 32'h0;
localparam P_AXI3 = 32'h1;
localparam P_AXILITE = 32'h2;
localparam P_AXILITE_SIZE = (C_AXI_DATA_WIDTH == 32) ? 3'b010 : 3'b011;
localparam P_INCR = 2'b01;
localparam P_DECERR = 2'b11;
localparam P_SLVERR = 2'b10;
localparam integer P_PROTECTION = 1;
localparam integer P_CONVERSION = 2;
wire s_awvalid_i;
wire s_arvalid_i;
wire s_wvalid_i ;
wire s_bready_i ;
wire s_rready_i ;
wire s_awready_i;
wire s_wready_i;
wire s_bvalid_i;
wire [C_AXI_ID_WIDTH-1:0] s_bid_i;
wire [1:0] s_bresp_i;
wire [C_AXI_BUSER_WIDTH-1:0] s_buser_i;
wire s_arready_i;
wire s_rvalid_i;
wire [C_AXI_ID_WIDTH-1:0] s_rid_i;
wire [1:0] s_rresp_i;
wire [C_AXI_RUSER_WIDTH-1:0] s_ruser_i;
wire [C_AXI_DATA_WIDTH-1:0] s_rdata_i;
wire s_rlast_i;
generate
if ((C_M_AXI_PROTOCOL == P_AXILITE) || (C_S_AXI_PROTOCOL == P_AXILITE)) begin : gen_axilite
assign m_axi_awid = 0;
assign m_axi_awlen = 0;
assign m_axi_awsize = P_AXILITE_SIZE;
assign m_axi_awburst = P_INCR;
assign m_axi_awlock = 0;
assign m_axi_awcache = 0;
assign m_axi_awregion = 0;
assign m_axi_awqos = 0;
assign m_axi_awuser = 0;
assign m_axi_wid = 0;
assign m_axi_wlast = 1'b1;
assign m_axi_wuser = 0;
assign m_axi_arid = 0;
assign m_axi_arlen = 0;
assign m_axi_arsize = P_AXILITE_SIZE;
assign m_axi_arburst = P_INCR;
assign m_axi_arlock = 0;
assign m_axi_arcache = 0;
assign m_axi_arregion = 0;
assign m_axi_arqos = 0;
assign m_axi_aruser = 0;
if (((C_IGNORE_ID == 1) && (C_TRANSLATION_MODE != P_CONVERSION)) || (C_S_AXI_PROTOCOL == P_AXILITE)) begin : gen_axilite_passthru
assign m_axi_awaddr = s_axi_awaddr;
assign m_axi_awprot = s_axi_awprot;
assign m_axi_awvalid = s_awvalid_i;
assign s_awready_i = m_axi_awready;
assign m_axi_wdata = s_axi_wdata;
assign m_axi_wstrb = s_axi_wstrb;
assign m_axi_wvalid = s_wvalid_i;
assign s_wready_i = m_axi_wready;
assign s_bid_i = 0;
assign s_bresp_i = m_axi_bresp;
assign s_buser_i = 0;
assign s_bvalid_i = m_axi_bvalid;
assign m_axi_bready = s_bready_i;
assign m_axi_araddr = s_axi_araddr;
assign m_axi_arprot = s_axi_arprot;
assign m_axi_arvalid = s_arvalid_i;
assign s_arready_i = m_axi_arready;
assign s_rid_i = 0;
assign s_rdata_i = m_axi_rdata;
assign s_rresp_i = m_axi_rresp;
assign s_rlast_i = 1'b1;
assign s_ruser_i = 0;
assign s_rvalid_i = m_axi_rvalid;
assign m_axi_rready = s_rready_i;
end else if (C_TRANSLATION_MODE == P_CONVERSION) begin : gen_b2s_conv
assign s_buser_i = {C_AXI_BUSER_WIDTH{1'b0}};
assign s_ruser_i = {C_AXI_RUSER_WIDTH{1'b0}};
axi_protocol_converter_v2_1_b2s #(
.C_S_AXI_PROTOCOL (C_S_AXI_PROTOCOL),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_ADDR_WIDTH (C_AXI_ADDR_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_SUPPORTS_WRITE (C_AXI_SUPPORTS_WRITE),
.C_AXI_SUPPORTS_READ (C_AXI_SUPPORTS_READ)
) axilite_b2s (
.aresetn (aresetn),
.aclk (aclk),
.s_axi_awid (s_axi_awid),
.s_axi_awaddr (s_axi_awaddr),
.s_axi_awlen (s_axi_awlen),
.s_axi_awsize (s_axi_awsize),
.s_axi_awburst (s_axi_awburst),
.s_axi_awprot (s_axi_awprot),
.s_axi_awvalid (s_awvalid_i),
.s_axi_awready (s_awready_i),
.s_axi_wdata (s_axi_wdata),
.s_axi_wstrb (s_axi_wstrb),
.s_axi_wlast (s_axi_wlast),
.s_axi_wvalid (s_wvalid_i),
.s_axi_wready (s_wready_i),
.s_axi_bid (s_bid_i),
.s_axi_bresp (s_bresp_i),
.s_axi_bvalid (s_bvalid_i),
.s_axi_bready (s_bready_i),
.s_axi_arid (s_axi_arid),
.s_axi_araddr (s_axi_araddr),
.s_axi_arlen (s_axi_arlen),
.s_axi_arsize (s_axi_arsize),
.s_axi_arburst (s_axi_arburst),
.s_axi_arprot (s_axi_arprot),
.s_axi_arvalid (s_arvalid_i),
.s_axi_arready (s_arready_i),
.s_axi_rid (s_rid_i),
.s_axi_rdata (s_rdata_i),
.s_axi_rresp (s_rresp_i),
.s_axi_rlast (s_rlast_i),
.s_axi_rvalid (s_rvalid_i),
.s_axi_rready (s_rready_i),
.m_axi_awaddr (m_axi_awaddr),
.m_axi_awprot (m_axi_awprot),
.m_axi_awvalid (m_axi_awvalid),
.m_axi_awready (m_axi_awready),
.m_axi_wdata (m_axi_wdata),
.m_axi_wstrb (m_axi_wstrb),
.m_axi_wvalid (m_axi_wvalid),
.m_axi_wready (m_axi_wready),
.m_axi_bresp (m_axi_bresp),
.m_axi_bvalid (m_axi_bvalid),
.m_axi_bready (m_axi_bready),
.m_axi_araddr (m_axi_araddr),
.m_axi_arprot (m_axi_arprot),
.m_axi_arvalid (m_axi_arvalid),
.m_axi_arready (m_axi_arready),
.m_axi_rdata (m_axi_rdata),
.m_axi_rresp (m_axi_rresp),
.m_axi_rvalid (m_axi_rvalid),
.m_axi_rready (m_axi_rready)
);
end else begin : gen_axilite_conv
axi_protocol_converter_v2_1_axilite_conv #(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_ADDR_WIDTH (C_AXI_ADDR_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_SUPPORTS_WRITE (C_AXI_SUPPORTS_WRITE),
.C_AXI_SUPPORTS_READ (C_AXI_SUPPORTS_READ),
.C_AXI_RUSER_WIDTH (C_AXI_RUSER_WIDTH),
.C_AXI_BUSER_WIDTH (C_AXI_BUSER_WIDTH)
) axilite_conv_inst (
.ARESETN (aresetn),
.ACLK (aclk),
.S_AXI_AWID (s_axi_awid),
.S_AXI_AWADDR (s_axi_awaddr),
.S_AXI_AWPROT (s_axi_awprot),
.S_AXI_AWVALID (s_awvalid_i),
.S_AXI_AWREADY (s_awready_i),
.S_AXI_WDATA (s_axi_wdata),
.S_AXI_WSTRB (s_axi_wstrb),
.S_AXI_WVALID (s_wvalid_i),
.S_AXI_WREADY (s_wready_i),
.S_AXI_BID (s_bid_i),
.S_AXI_BRESP (s_bresp_i),
.S_AXI_BUSER (s_buser_i),
.S_AXI_BVALID (s_bvalid_i),
.S_AXI_BREADY (s_bready_i),
.S_AXI_ARID (s_axi_arid),
.S_AXI_ARADDR (s_axi_araddr),
.S_AXI_ARPROT (s_axi_arprot),
.S_AXI_ARVALID (s_arvalid_i),
.S_AXI_ARREADY (s_arready_i),
.S_AXI_RID (s_rid_i),
.S_AXI_RDATA (s_rdata_i),
.S_AXI_RRESP (s_rresp_i),
.S_AXI_RLAST (s_rlast_i),
.S_AXI_RUSER (s_ruser_i),
.S_AXI_RVALID (s_rvalid_i),
.S_AXI_RREADY (s_rready_i),
.M_AXI_AWADDR (m_axi_awaddr),
.M_AXI_AWPROT (m_axi_awprot),
.M_AXI_AWVALID (m_axi_awvalid),
.M_AXI_AWREADY (m_axi_awready),
.M_AXI_WDATA (m_axi_wdata),
.M_AXI_WSTRB (m_axi_wstrb),
.M_AXI_WVALID (m_axi_wvalid),
.M_AXI_WREADY (m_axi_wready),
.M_AXI_BRESP (m_axi_bresp),
.M_AXI_BVALID (m_axi_bvalid),
.M_AXI_BREADY (m_axi_bready),
.M_AXI_ARADDR (m_axi_araddr),
.M_AXI_ARPROT (m_axi_arprot),
.M_AXI_ARVALID (m_axi_arvalid),
.M_AXI_ARREADY (m_axi_arready),
.M_AXI_RDATA (m_axi_rdata),
.M_AXI_RRESP (m_axi_rresp),
.M_AXI_RVALID (m_axi_rvalid),
.M_AXI_RREADY (m_axi_rready)
);
end
end else if ((C_M_AXI_PROTOCOL == P_AXI3) && (C_S_AXI_PROTOCOL == P_AXI4)) begin : gen_axi4_axi3
axi_protocol_converter_v2_1_axi3_conv #(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_ADDR_WIDTH (C_AXI_ADDR_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_SUPPORTS_USER_SIGNALS (C_AXI_SUPPORTS_USER_SIGNALS),
.C_AXI_AWUSER_WIDTH (C_AXI_AWUSER_WIDTH),
.C_AXI_ARUSER_WIDTH (C_AXI_ARUSER_WIDTH),
.C_AXI_WUSER_WIDTH (C_AXI_WUSER_WIDTH),
.C_AXI_RUSER_WIDTH (C_AXI_RUSER_WIDTH),
.C_AXI_BUSER_WIDTH (C_AXI_BUSER_WIDTH),
.C_AXI_SUPPORTS_WRITE (C_AXI_SUPPORTS_WRITE),
.C_AXI_SUPPORTS_READ (C_AXI_SUPPORTS_READ),
.C_SUPPORT_SPLITTING ((C_TRANSLATION_MODE == P_CONVERSION) ? 1 : 0)
) axi3_conv_inst (
.ARESETN (aresetn),
.ACLK (aclk),
.S_AXI_AWID (s_axi_awid),
.S_AXI_AWADDR (s_axi_awaddr),
.S_AXI_AWLEN (s_axi_awlen),
.S_AXI_AWSIZE (s_axi_awsize),
.S_AXI_AWBURST (s_axi_awburst),
.S_AXI_AWLOCK (s_axi_awlock),
.S_AXI_AWCACHE (s_axi_awcache),
.S_AXI_AWPROT (s_axi_awprot),
.S_AXI_AWQOS (s_axi_awqos),
.S_AXI_AWUSER (s_axi_awuser),
.S_AXI_AWVALID (s_awvalid_i),
.S_AXI_AWREADY (s_awready_i),
.S_AXI_WDATA (s_axi_wdata),
.S_AXI_WSTRB (s_axi_wstrb),
.S_AXI_WLAST (s_axi_wlast),
.S_AXI_WUSER (s_axi_wuser),
.S_AXI_WVALID (s_wvalid_i),
.S_AXI_WREADY (s_wready_i),
.S_AXI_BID (s_bid_i),
.S_AXI_BRESP (s_bresp_i),
.S_AXI_BUSER (s_buser_i),
.S_AXI_BVALID (s_bvalid_i),
.S_AXI_BREADY (s_bready_i),
.S_AXI_ARID (s_axi_arid),
.S_AXI_ARADDR (s_axi_araddr),
.S_AXI_ARLEN (s_axi_arlen),
.S_AXI_ARSIZE (s_axi_arsize),
.S_AXI_ARBURST (s_axi_arburst),
.S_AXI_ARLOCK (s_axi_arlock),
.S_AXI_ARCACHE (s_axi_arcache),
.S_AXI_ARPROT (s_axi_arprot),
.S_AXI_ARQOS (s_axi_arqos),
.S_AXI_ARUSER (s_axi_aruser),
.S_AXI_ARVALID (s_arvalid_i),
.S_AXI_ARREADY (s_arready_i),
.S_AXI_RID (s_rid_i),
.S_AXI_RDATA (s_rdata_i),
.S_AXI_RRESP (s_rresp_i),
.S_AXI_RLAST (s_rlast_i),
.S_AXI_RUSER (s_ruser_i),
.S_AXI_RVALID (s_rvalid_i),
.S_AXI_RREADY (s_rready_i),
.M_AXI_AWID (m_axi_awid),
.M_AXI_AWADDR (m_axi_awaddr),
.M_AXI_AWLEN (m_axi_awlen),
.M_AXI_AWSIZE (m_axi_awsize),
.M_AXI_AWBURST (m_axi_awburst),
.M_AXI_AWLOCK (m_axi_awlock),
.M_AXI_AWCACHE (m_axi_awcache),
.M_AXI_AWPROT (m_axi_awprot),
.M_AXI_AWQOS (m_axi_awqos),
.M_AXI_AWUSER (m_axi_awuser),
.M_AXI_AWVALID (m_axi_awvalid),
.M_AXI_AWREADY (m_axi_awready),
.M_AXI_WID (m_axi_wid),
.M_AXI_WDATA (m_axi_wdata),
.M_AXI_WSTRB (m_axi_wstrb),
.M_AXI_WLAST (m_axi_wlast),
.M_AXI_WUSER (m_axi_wuser),
.M_AXI_WVALID (m_axi_wvalid),
.M_AXI_WREADY (m_axi_wready),
.M_AXI_BID (m_axi_bid),
.M_AXI_BRESP (m_axi_bresp),
.M_AXI_BUSER (m_axi_buser),
.M_AXI_BVALID (m_axi_bvalid),
.M_AXI_BREADY (m_axi_bready),
.M_AXI_ARID (m_axi_arid),
.M_AXI_ARADDR (m_axi_araddr),
.M_AXI_ARLEN (m_axi_arlen),
.M_AXI_ARSIZE (m_axi_arsize),
.M_AXI_ARBURST (m_axi_arburst),
.M_AXI_ARLOCK (m_axi_arlock),
.M_AXI_ARCACHE (m_axi_arcache),
.M_AXI_ARPROT (m_axi_arprot),
.M_AXI_ARQOS (m_axi_arqos),
.M_AXI_ARUSER (m_axi_aruser),
.M_AXI_ARVALID (m_axi_arvalid),
.M_AXI_ARREADY (m_axi_arready),
.M_AXI_RID (m_axi_rid),
.M_AXI_RDATA (m_axi_rdata),
.M_AXI_RRESP (m_axi_rresp),
.M_AXI_RLAST (m_axi_rlast),
.M_AXI_RUSER (m_axi_ruser),
.M_AXI_RVALID (m_axi_rvalid),
.M_AXI_RREADY (m_axi_rready)
);
assign m_axi_awregion = 0;
assign m_axi_arregion = 0;
end else if ((C_S_AXI_PROTOCOL == P_AXI3) && (C_M_AXI_PROTOCOL == P_AXI4)) begin : gen_axi3_axi4
assign m_axi_awid = s_axi_awid;
assign m_axi_awaddr = s_axi_awaddr;
assign m_axi_awlen = {4'h0, s_axi_awlen[3:0]};
assign m_axi_awsize = s_axi_awsize;
assign m_axi_awburst = s_axi_awburst;
assign m_axi_awlock = s_axi_awlock[0];
assign m_axi_awcache = s_axi_awcache;
assign m_axi_awprot = s_axi_awprot;
assign m_axi_awregion = 4'h0;
assign m_axi_awqos = s_axi_awqos;
assign m_axi_awuser = s_axi_awuser;
assign m_axi_awvalid = s_awvalid_i;
assign s_awready_i = m_axi_awready;
assign m_axi_wid = {C_AXI_ID_WIDTH{1'b0}} ;
assign m_axi_wdata = s_axi_wdata;
assign m_axi_wstrb = s_axi_wstrb;
assign m_axi_wlast = s_axi_wlast;
assign m_axi_wuser = s_axi_wuser;
assign m_axi_wvalid = s_wvalid_i;
assign s_wready_i = m_axi_wready;
assign s_bid_i = m_axi_bid;
assign s_bresp_i = m_axi_bresp;
assign s_buser_i = m_axi_buser;
assign s_bvalid_i = m_axi_bvalid;
assign m_axi_bready = s_bready_i;
assign m_axi_arid = s_axi_arid;
assign m_axi_araddr = s_axi_araddr;
assign m_axi_arlen = {4'h0, s_axi_arlen[3:0]};
assign m_axi_arsize = s_axi_arsize;
assign m_axi_arburst = s_axi_arburst;
assign m_axi_arlock = s_axi_arlock[0];
assign m_axi_arcache = s_axi_arcache;
assign m_axi_arprot = s_axi_arprot;
assign m_axi_arregion = 4'h0;
assign m_axi_arqos = s_axi_arqos;
assign m_axi_aruser = s_axi_aruser;
assign m_axi_arvalid = s_arvalid_i;
assign s_arready_i = m_axi_arready;
assign s_rid_i = m_axi_rid;
assign s_rdata_i = m_axi_rdata;
assign s_rresp_i = m_axi_rresp;
assign s_rlast_i = m_axi_rlast;
assign s_ruser_i = m_axi_ruser;
assign s_rvalid_i = m_axi_rvalid;
assign m_axi_rready = s_rready_i;
end else begin :gen_no_conv
assign m_axi_awid = s_axi_awid;
assign m_axi_awaddr = s_axi_awaddr;
assign m_axi_awlen = s_axi_awlen;
assign m_axi_awsize = s_axi_awsize;
assign m_axi_awburst = s_axi_awburst;
assign m_axi_awlock = s_axi_awlock;
assign m_axi_awcache = s_axi_awcache;
assign m_axi_awprot = s_axi_awprot;
assign m_axi_awregion = s_axi_awregion;
assign m_axi_awqos = s_axi_awqos;
assign m_axi_awuser = s_axi_awuser;
assign m_axi_awvalid = s_awvalid_i;
assign s_awready_i = m_axi_awready;
assign m_axi_wid = s_axi_wid;
assign m_axi_wdata = s_axi_wdata;
assign m_axi_wstrb = s_axi_wstrb;
assign m_axi_wlast = s_axi_wlast;
assign m_axi_wuser = s_axi_wuser;
assign m_axi_wvalid = s_wvalid_i;
assign s_wready_i = m_axi_wready;
assign s_bid_i = m_axi_bid;
assign s_bresp_i = m_axi_bresp;
assign s_buser_i = m_axi_buser;
assign s_bvalid_i = m_axi_bvalid;
assign m_axi_bready = s_bready_i;
assign m_axi_arid = s_axi_arid;
assign m_axi_araddr = s_axi_araddr;
assign m_axi_arlen = s_axi_arlen;
assign m_axi_arsize = s_axi_arsize;
assign m_axi_arburst = s_axi_arburst;
assign m_axi_arlock = s_axi_arlock;
assign m_axi_arcache = s_axi_arcache;
assign m_axi_arprot = s_axi_arprot;
assign m_axi_arregion = s_axi_arregion;
assign m_axi_arqos = s_axi_arqos;
assign m_axi_aruser = s_axi_aruser;
assign m_axi_arvalid = s_arvalid_i;
assign s_arready_i = m_axi_arready;
assign s_rid_i = m_axi_rid;
assign s_rdata_i = m_axi_rdata;
assign s_rresp_i = m_axi_rresp;
assign s_rlast_i = m_axi_rlast;
assign s_ruser_i = m_axi_ruser;
assign s_rvalid_i = m_axi_rvalid;
assign m_axi_rready = s_rready_i;
end
if ((C_TRANSLATION_MODE == P_PROTECTION) &&
(((C_S_AXI_PROTOCOL != P_AXILITE) && (C_M_AXI_PROTOCOL == P_AXILITE)) ||
((C_S_AXI_PROTOCOL == P_AXI4) && (C_M_AXI_PROTOCOL == P_AXI3)))) begin : gen_err_detect
wire e_awvalid;
reg e_awvalid_r;
wire e_arvalid;
reg e_arvalid_r;
wire e_wvalid;
wire e_bvalid;
wire e_rvalid;
reg e_awready;
reg e_arready;
wire e_wready;
reg [C_AXI_ID_WIDTH-1:0] e_awid;
reg [C_AXI_ID_WIDTH-1:0] e_arid;
reg [8-1:0] e_arlen;
wire [C_AXI_ID_WIDTH-1:0] e_bid;
wire [C_AXI_ID_WIDTH-1:0] e_rid;
wire e_rlast;
wire w_err;
wire r_err;
wire busy_aw;
wire busy_w;
wire busy_ar;
wire aw_push;
wire aw_pop;
wire w_pop;
wire ar_push;
wire ar_pop;
reg s_awvalid_pending;
reg s_awvalid_en;
reg s_arvalid_en;
reg s_awready_en;
reg s_arready_en;
reg [4:0] aw_cnt;
reg [4:0] ar_cnt;
reg [4:0] w_cnt;
reg w_borrow;
reg err_busy_w;
reg err_busy_r;
assign w_err = (C_M_AXI_PROTOCOL == P_AXILITE) ? (s_axi_awlen != 0) : ((s_axi_awlen>>4) != 0);
assign r_err = (C_M_AXI_PROTOCOL == P_AXILITE) ? (s_axi_arlen != 0) : ((s_axi_arlen>>4) != 0);
assign s_awvalid_i = s_axi_awvalid & s_awvalid_en & ~w_err;
assign e_awvalid = e_awvalid_r & ~busy_aw & ~busy_w;
assign s_arvalid_i = s_axi_arvalid & s_arvalid_en & ~r_err;
assign e_arvalid = e_arvalid_r & ~busy_ar ;
assign s_wvalid_i = s_axi_wvalid & (busy_w | (s_awvalid_pending & ~w_borrow));
assign e_wvalid = s_axi_wvalid & err_busy_w;
assign s_bready_i = s_axi_bready & busy_aw;
assign s_rready_i = s_axi_rready & busy_ar;
assign s_axi_awready = (s_awready_i & s_awready_en) | e_awready;
assign s_axi_wready = (s_wready_i & (busy_w | (s_awvalid_pending & ~w_borrow))) | e_wready;
assign s_axi_bvalid = (s_bvalid_i & busy_aw) | e_bvalid;
assign s_axi_bid = err_busy_w ? e_bid : s_bid_i;
assign s_axi_bresp = err_busy_w ? P_SLVERR : s_bresp_i;
assign s_axi_buser = err_busy_w ? {C_AXI_BUSER_WIDTH{1'b0}} : s_buser_i;
assign s_axi_arready = (s_arready_i & s_arready_en) | e_arready;
assign s_axi_rvalid = (s_rvalid_i & busy_ar) | e_rvalid;
assign s_axi_rid = err_busy_r ? e_rid : s_rid_i;
assign s_axi_rresp = err_busy_r ? P_SLVERR : s_rresp_i;
assign s_axi_ruser = err_busy_r ? {C_AXI_RUSER_WIDTH{1'b0}} : s_ruser_i;
assign s_axi_rdata = err_busy_r ? {C_AXI_DATA_WIDTH{1'b0}} : s_rdata_i;
assign s_axi_rlast = err_busy_r ? e_rlast : s_rlast_i;
assign busy_aw = (aw_cnt != 0);
assign busy_w = (w_cnt != 0);
assign busy_ar = (ar_cnt != 0);
assign aw_push = s_awvalid_i & s_awready_i & s_awready_en;
assign aw_pop = s_bvalid_i & s_bready_i;
assign w_pop = s_wvalid_i & s_wready_i & s_axi_wlast;
assign ar_push = s_arvalid_i & s_arready_i & s_arready_en;
assign ar_pop = s_rvalid_i & s_rready_i & s_rlast_i;
always @(posedge aclk) begin
if (~aresetn) begin
s_awvalid_en <= 1'b0;
s_arvalid_en <= 1'b0;
s_awready_en <= 1'b0;
s_arready_en <= 1'b0;
e_awvalid_r <= 1'b0;
e_arvalid_r <= 1'b0;
e_awready <= 1'b0;
e_arready <= 1'b0;
aw_cnt <= 0;
w_cnt <= 0;
ar_cnt <= 0;
err_busy_w <= 1'b0;
err_busy_r <= 1'b0;
w_borrow <= 1'b0;
s_awvalid_pending <= 1'b0;
end else begin
e_awready <= 1'b0; // One-cycle pulse
if (e_bvalid & s_axi_bready) begin
s_awvalid_en <= 1'b1;
s_awready_en <= 1'b1;
err_busy_w <= 1'b0;
end else if (e_awvalid) begin
e_awvalid_r <= 1'b0;
err_busy_w <= 1'b1;
end else if (s_axi_awvalid & w_err & ~e_awvalid_r & ~err_busy_w) begin
e_awvalid_r <= 1'b1;
e_awready <= ~(s_awready_i & s_awvalid_en); // 1-cycle pulse if awready not already asserted
s_awvalid_en <= 1'b0;
s_awready_en <= 1'b0;
end else if ((&aw_cnt) | (&w_cnt) | aw_push) begin
s_awvalid_en <= 1'b0;
s_awready_en <= 1'b0;
end else if (~err_busy_w & ~e_awvalid_r & ~(s_axi_awvalid & w_err)) begin
s_awvalid_en <= 1'b1;
s_awready_en <= 1'b1;
end
if (aw_push & ~aw_pop) begin
aw_cnt <= aw_cnt + 1;
end else if (~aw_push & aw_pop & (|aw_cnt)) begin
aw_cnt <= aw_cnt - 1;
end
if (aw_push) begin
if (~w_pop & ~w_borrow) begin
w_cnt <= w_cnt + 1;
end
w_borrow <= 1'b0;
end else if (~aw_push & w_pop) begin
if (|w_cnt) begin
w_cnt <= w_cnt - 1;
end else begin
w_borrow <= 1'b1;
end
end
s_awvalid_pending <= s_awvalid_i & ~s_awready_i;
e_arready <= 1'b0; // One-cycle pulse
if (e_rvalid & s_axi_rready & e_rlast) begin
s_arvalid_en <= 1'b1;
s_arready_en <= 1'b1;
err_busy_r <= 1'b0;
end else if (e_arvalid) begin
e_arvalid_r <= 1'b0;
err_busy_r <= 1'b1;
end else if (s_axi_arvalid & r_err & ~e_arvalid_r & ~err_busy_r) begin
e_arvalid_r <= 1'b1;
e_arready <= ~(s_arready_i & s_arvalid_en); // 1-cycle pulse if arready not already asserted
s_arvalid_en <= 1'b0;
s_arready_en <= 1'b0;
end else if ((&ar_cnt) | ar_push) begin
s_arvalid_en <= 1'b0;
s_arready_en <= 1'b0;
end else if (~err_busy_r & ~e_arvalid_r & ~(s_axi_arvalid & r_err)) begin
s_arvalid_en <= 1'b1;
s_arready_en <= 1'b1;
end
if (ar_push & ~ar_pop) begin
ar_cnt <= ar_cnt + 1;
end else if (~ar_push & ar_pop & (|ar_cnt)) begin
ar_cnt <= ar_cnt - 1;
end
end
end
always @(posedge aclk) begin
if (s_axi_awvalid & ~err_busy_w & ~e_awvalid_r ) begin
e_awid <= s_axi_awid;
end
if (s_axi_arvalid & ~err_busy_r & ~e_arvalid_r ) begin
e_arid <= s_axi_arid;
e_arlen <= s_axi_arlen;
end
end
axi_protocol_converter_v2_1_decerr_slave #
(
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_RUSER_WIDTH (C_AXI_RUSER_WIDTH),
.C_AXI_BUSER_WIDTH (C_AXI_BUSER_WIDTH),
.C_AXI_PROTOCOL (C_S_AXI_PROTOCOL),
.C_RESP (P_SLVERR),
.C_IGNORE_ID (C_IGNORE_ID)
)
decerr_slave_inst
(
.ACLK (aclk),
.ARESETN (aresetn),
.S_AXI_AWID (e_awid),
.S_AXI_AWVALID (e_awvalid),
.S_AXI_AWREADY (),
.S_AXI_WLAST (s_axi_wlast),
.S_AXI_WVALID (e_wvalid),
.S_AXI_WREADY (e_wready),
.S_AXI_BID (e_bid),
.S_AXI_BRESP (),
.S_AXI_BUSER (),
.S_AXI_BVALID (e_bvalid),
.S_AXI_BREADY (s_axi_bready),
.S_AXI_ARID (e_arid),
.S_AXI_ARLEN (e_arlen),
.S_AXI_ARVALID (e_arvalid),
.S_AXI_ARREADY (),
.S_AXI_RID (e_rid),
.S_AXI_RDATA (),
.S_AXI_RRESP (),
.S_AXI_RUSER (),
.S_AXI_RLAST (e_rlast),
.S_AXI_RVALID (e_rvalid),
.S_AXI_RREADY (s_axi_rready)
);
end else begin : gen_no_err_detect
assign s_awvalid_i = s_axi_awvalid;
assign s_arvalid_i = s_axi_arvalid;
assign s_wvalid_i = s_axi_wvalid;
assign s_bready_i = s_axi_bready;
assign s_rready_i = s_axi_rready;
assign s_axi_awready = s_awready_i;
assign s_axi_wready = s_wready_i;
assign s_axi_bvalid = s_bvalid_i;
assign s_axi_bid = s_bid_i;
assign s_axi_bresp = s_bresp_i;
assign s_axi_buser = s_buser_i;
assign s_axi_arready = s_arready_i;
assign s_axi_rvalid = s_rvalid_i;
assign s_axi_rid = s_rid_i;
assign s_axi_rresp = s_rresp_i;
assign s_axi_ruser = s_ruser_i;
assign s_axi_rdata = s_rdata_i;
assign s_axi_rlast = s_rlast_i;
end // gen_err_detect
endgenerate
endmodule
`default_nettype wire
|
// -- (c) Copyright 2012 -2013 Xilinx, Inc. All rights reserved.
// --
// -- This file contains confidential and proprietary information
// -- of Xilinx, Inc. and is protected under U.S. and
// -- international copyright and other intellectual property
// -- laws.
// --
// -- DISCLAIMER
// -- This disclaimer is not a license and does not grant any
// -- rights to the materials distributed herewith. Except as
// -- otherwise provided in a valid license issued to you by
// -- Xilinx, and to the maximum extent permitted by applicable
// -- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// -- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// -- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// -- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// -- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// -- (2) Xilinx shall not be liable (whether in contract or tort,
// -- including negligence, or under any other theory of
// -- liability) for any loss or damage of any kind or nature
// -- related to, arising under or in connection with these
// -- materials, including for any direct, or any indirect,
// -- special, incidental, or consequential loss or damage
// -- (including loss of data, profits, goodwill, or any type of
// -- loss or damage suffered as a result of any action brought
// -- by a third party) even if such damage or loss was
// -- reasonably foreseeable or Xilinx had been advised of the
// -- possibility of the same.
// --
// -- CRITICAL APPLICATIONS
// -- Xilinx products are not designed or intended to be fail-
// -- safe, or for use in any application requiring fail-safe
// -- performance, such as life-support or safety devices or
// -- systems, Class III medical devices, nuclear facilities,
// -- applications related to the deployment of airbags, or any
// -- other applications that could lead to death, personal
// -- injury, or severe property or environmental damage
// -- (individually and collectively, "Critical
// -- Applications"). Customer assumes the sole risk and
// -- liability of any use of Xilinx products in Critical
// -- Applications, subject only to applicable laws and
// -- regulations governing limitations on product liability.
// --
// -- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// -- PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
//
// File name: axi_protocol_converter.v
//
// Description:
// This module is a bank of AXI4-Lite and AXI3 protocol converters for a vectored AXI interface.
// The interface of this module consists of a vectored slave and master interface
// which are each concatenations of upper-level AXI pathways,
// plus various vectored parameters.
// This module instantiates a set of individual protocol converter modules.
//
//-----------------------------------------------------------------------------
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_axi_protocol_converter #(
parameter C_FAMILY = "virtex6",
parameter integer C_M_AXI_PROTOCOL = 0,
parameter integer C_S_AXI_PROTOCOL = 0,
parameter integer C_IGNORE_ID = 0,
// 0 = RID/BID are stored by axilite_conv.
// 1 = RID/BID have already been stored in an upstream device, like SASD crossbar.
parameter integer C_AXI_ID_WIDTH = 4,
parameter integer C_AXI_ADDR_WIDTH = 32,
parameter integer C_AXI_DATA_WIDTH = 32,
parameter integer C_AXI_SUPPORTS_WRITE = 1,
parameter integer C_AXI_SUPPORTS_READ = 1,
parameter integer C_AXI_SUPPORTS_USER_SIGNALS = 0,
// 1 = Propagate all USER signals, 0 = Dont propagate.
parameter integer C_AXI_AWUSER_WIDTH = 1,
parameter integer C_AXI_ARUSER_WIDTH = 1,
parameter integer C_AXI_WUSER_WIDTH = 1,
parameter integer C_AXI_RUSER_WIDTH = 1,
parameter integer C_AXI_BUSER_WIDTH = 1,
parameter integer C_TRANSLATION_MODE = 1
// 0 (Unprotected) = Disable all error checking; master is well-behaved.
// 1 (Protection) = Detect SI transaction violations, but perform no splitting.
// AXI4 -> AXI3 must be <= 16 beats; AXI4/3 -> AXI4LITE must be single.
// 2 (Conversion) = Include transaction splitting logic
) (
// Global Signals
input wire aclk,
input wire aresetn,
// Slave Interface Write Address Ports
input wire [C_AXI_ID_WIDTH-1:0] s_axi_awid,
input wire [C_AXI_ADDR_WIDTH-1:0] s_axi_awaddr,
input wire [((C_S_AXI_PROTOCOL == 1) ? 4 : 8)-1:0] s_axi_awlen,
input wire [3-1:0] s_axi_awsize,
input wire [2-1:0] s_axi_awburst,
input wire [((C_S_AXI_PROTOCOL == 1) ? 2 : 1)-1:0] s_axi_awlock,
input wire [4-1:0] s_axi_awcache,
input wire [3-1:0] s_axi_awprot,
input wire [4-1:0] s_axi_awregion,
input wire [4-1:0] s_axi_awqos,
input wire [C_AXI_AWUSER_WIDTH-1:0] s_axi_awuser,
input wire s_axi_awvalid,
output wire s_axi_awready,
// Slave Interface Write Data Ports
input wire [C_AXI_ID_WIDTH-1:0] s_axi_wid,
input wire [C_AXI_DATA_WIDTH-1:0] s_axi_wdata,
input wire [C_AXI_DATA_WIDTH/8-1:0] s_axi_wstrb,
input wire s_axi_wlast,
input wire [C_AXI_WUSER_WIDTH-1:0] s_axi_wuser,
input wire s_axi_wvalid,
output wire s_axi_wready,
// Slave Interface Write Response Ports
output wire [C_AXI_ID_WIDTH-1:0] s_axi_bid,
output wire [2-1:0] s_axi_bresp,
output wire [C_AXI_BUSER_WIDTH-1:0] s_axi_buser,
output wire s_axi_bvalid,
input wire s_axi_bready,
// Slave Interface Read Address Ports
input wire [C_AXI_ID_WIDTH-1:0] s_axi_arid,
input wire [C_AXI_ADDR_WIDTH-1:0] s_axi_araddr,
input wire [((C_S_AXI_PROTOCOL == 1) ? 4 : 8)-1:0] s_axi_arlen,
input wire [3-1:0] s_axi_arsize,
input wire [2-1:0] s_axi_arburst,
input wire [((C_S_AXI_PROTOCOL == 1) ? 2 : 1)-1:0] s_axi_arlock,
input wire [4-1:0] s_axi_arcache,
input wire [3-1:0] s_axi_arprot,
input wire [4-1:0] s_axi_arregion,
input wire [4-1:0] s_axi_arqos,
input wire [C_AXI_ARUSER_WIDTH-1:0] s_axi_aruser,
input wire s_axi_arvalid,
output wire s_axi_arready,
// Slave Interface Read Data Ports
output wire [C_AXI_ID_WIDTH-1:0] s_axi_rid,
output wire [C_AXI_DATA_WIDTH-1:0] s_axi_rdata,
output wire [2-1:0] s_axi_rresp,
output wire s_axi_rlast,
output wire [C_AXI_RUSER_WIDTH-1:0] s_axi_ruser,
output wire s_axi_rvalid,
input wire s_axi_rready,
// Master Interface Write Address Port
output wire [C_AXI_ID_WIDTH-1:0] m_axi_awid,
output wire [C_AXI_ADDR_WIDTH-1:0] m_axi_awaddr,
output wire [((C_M_AXI_PROTOCOL == 1) ? 4 : 8)-1:0] m_axi_awlen,
output wire [3-1:0] m_axi_awsize,
output wire [2-1:0] m_axi_awburst,
output wire [((C_M_AXI_PROTOCOL == 1) ? 2 : 1)-1:0] m_axi_awlock,
output wire [4-1:0] m_axi_awcache,
output wire [3-1:0] m_axi_awprot,
output wire [4-1:0] m_axi_awregion,
output wire [4-1:0] m_axi_awqos,
output wire [C_AXI_AWUSER_WIDTH-1:0] m_axi_awuser,
output wire m_axi_awvalid,
input wire m_axi_awready,
// Master Interface Write Data Ports
output wire [C_AXI_ID_WIDTH-1:0] m_axi_wid,
output wire [C_AXI_DATA_WIDTH-1:0] m_axi_wdata,
output wire [C_AXI_DATA_WIDTH/8-1:0] m_axi_wstrb,
output wire m_axi_wlast,
output wire [C_AXI_WUSER_WIDTH-1:0] m_axi_wuser,
output wire m_axi_wvalid,
input wire m_axi_wready,
// Master Interface Write Response Ports
input wire [C_AXI_ID_WIDTH-1:0] m_axi_bid,
input wire [2-1:0] m_axi_bresp,
input wire [C_AXI_BUSER_WIDTH-1:0] m_axi_buser,
input wire m_axi_bvalid,
output wire m_axi_bready,
// Master Interface Read Address Port
output wire [C_AXI_ID_WIDTH-1:0] m_axi_arid,
output wire [C_AXI_ADDR_WIDTH-1:0] m_axi_araddr,
output wire [((C_M_AXI_PROTOCOL == 1) ? 4 : 8)-1:0] m_axi_arlen,
output wire [3-1:0] m_axi_arsize,
output wire [2-1:0] m_axi_arburst,
output wire [((C_M_AXI_PROTOCOL == 1) ? 2 : 1)-1:0] m_axi_arlock,
output wire [4-1:0] m_axi_arcache,
output wire [3-1:0] m_axi_arprot,
output wire [4-1:0] m_axi_arregion,
output wire [4-1:0] m_axi_arqos,
output wire [C_AXI_ARUSER_WIDTH-1:0] m_axi_aruser,
output wire m_axi_arvalid,
input wire m_axi_arready,
// Master Interface Read Data Ports
input wire [C_AXI_ID_WIDTH-1:0] m_axi_rid,
input wire [C_AXI_DATA_WIDTH-1:0] m_axi_rdata,
input wire [2-1:0] m_axi_rresp,
input wire m_axi_rlast,
input wire [C_AXI_RUSER_WIDTH-1:0] m_axi_ruser,
input wire m_axi_rvalid,
output wire m_axi_rready
);
localparam P_AXI4 = 32'h0;
localparam P_AXI3 = 32'h1;
localparam P_AXILITE = 32'h2;
localparam P_AXILITE_SIZE = (C_AXI_DATA_WIDTH == 32) ? 3'b010 : 3'b011;
localparam P_INCR = 2'b01;
localparam P_DECERR = 2'b11;
localparam P_SLVERR = 2'b10;
localparam integer P_PROTECTION = 1;
localparam integer P_CONVERSION = 2;
wire s_awvalid_i;
wire s_arvalid_i;
wire s_wvalid_i ;
wire s_bready_i ;
wire s_rready_i ;
wire s_awready_i;
wire s_wready_i;
wire s_bvalid_i;
wire [C_AXI_ID_WIDTH-1:0] s_bid_i;
wire [1:0] s_bresp_i;
wire [C_AXI_BUSER_WIDTH-1:0] s_buser_i;
wire s_arready_i;
wire s_rvalid_i;
wire [C_AXI_ID_WIDTH-1:0] s_rid_i;
wire [1:0] s_rresp_i;
wire [C_AXI_RUSER_WIDTH-1:0] s_ruser_i;
wire [C_AXI_DATA_WIDTH-1:0] s_rdata_i;
wire s_rlast_i;
generate
if ((C_M_AXI_PROTOCOL == P_AXILITE) || (C_S_AXI_PROTOCOL == P_AXILITE)) begin : gen_axilite
assign m_axi_awid = 0;
assign m_axi_awlen = 0;
assign m_axi_awsize = P_AXILITE_SIZE;
assign m_axi_awburst = P_INCR;
assign m_axi_awlock = 0;
assign m_axi_awcache = 0;
assign m_axi_awregion = 0;
assign m_axi_awqos = 0;
assign m_axi_awuser = 0;
assign m_axi_wid = 0;
assign m_axi_wlast = 1'b1;
assign m_axi_wuser = 0;
assign m_axi_arid = 0;
assign m_axi_arlen = 0;
assign m_axi_arsize = P_AXILITE_SIZE;
assign m_axi_arburst = P_INCR;
assign m_axi_arlock = 0;
assign m_axi_arcache = 0;
assign m_axi_arregion = 0;
assign m_axi_arqos = 0;
assign m_axi_aruser = 0;
if (((C_IGNORE_ID == 1) && (C_TRANSLATION_MODE != P_CONVERSION)) || (C_S_AXI_PROTOCOL == P_AXILITE)) begin : gen_axilite_passthru
assign m_axi_awaddr = s_axi_awaddr;
assign m_axi_awprot = s_axi_awprot;
assign m_axi_awvalid = s_awvalid_i;
assign s_awready_i = m_axi_awready;
assign m_axi_wdata = s_axi_wdata;
assign m_axi_wstrb = s_axi_wstrb;
assign m_axi_wvalid = s_wvalid_i;
assign s_wready_i = m_axi_wready;
assign s_bid_i = 0;
assign s_bresp_i = m_axi_bresp;
assign s_buser_i = 0;
assign s_bvalid_i = m_axi_bvalid;
assign m_axi_bready = s_bready_i;
assign m_axi_araddr = s_axi_araddr;
assign m_axi_arprot = s_axi_arprot;
assign m_axi_arvalid = s_arvalid_i;
assign s_arready_i = m_axi_arready;
assign s_rid_i = 0;
assign s_rdata_i = m_axi_rdata;
assign s_rresp_i = m_axi_rresp;
assign s_rlast_i = 1'b1;
assign s_ruser_i = 0;
assign s_rvalid_i = m_axi_rvalid;
assign m_axi_rready = s_rready_i;
end else if (C_TRANSLATION_MODE == P_CONVERSION) begin : gen_b2s_conv
assign s_buser_i = {C_AXI_BUSER_WIDTH{1'b0}};
assign s_ruser_i = {C_AXI_RUSER_WIDTH{1'b0}};
axi_protocol_converter_v2_1_b2s #(
.C_S_AXI_PROTOCOL (C_S_AXI_PROTOCOL),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_ADDR_WIDTH (C_AXI_ADDR_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_SUPPORTS_WRITE (C_AXI_SUPPORTS_WRITE),
.C_AXI_SUPPORTS_READ (C_AXI_SUPPORTS_READ)
) axilite_b2s (
.aresetn (aresetn),
.aclk (aclk),
.s_axi_awid (s_axi_awid),
.s_axi_awaddr (s_axi_awaddr),
.s_axi_awlen (s_axi_awlen),
.s_axi_awsize (s_axi_awsize),
.s_axi_awburst (s_axi_awburst),
.s_axi_awprot (s_axi_awprot),
.s_axi_awvalid (s_awvalid_i),
.s_axi_awready (s_awready_i),
.s_axi_wdata (s_axi_wdata),
.s_axi_wstrb (s_axi_wstrb),
.s_axi_wlast (s_axi_wlast),
.s_axi_wvalid (s_wvalid_i),
.s_axi_wready (s_wready_i),
.s_axi_bid (s_bid_i),
.s_axi_bresp (s_bresp_i),
.s_axi_bvalid (s_bvalid_i),
.s_axi_bready (s_bready_i),
.s_axi_arid (s_axi_arid),
.s_axi_araddr (s_axi_araddr),
.s_axi_arlen (s_axi_arlen),
.s_axi_arsize (s_axi_arsize),
.s_axi_arburst (s_axi_arburst),
.s_axi_arprot (s_axi_arprot),
.s_axi_arvalid (s_arvalid_i),
.s_axi_arready (s_arready_i),
.s_axi_rid (s_rid_i),
.s_axi_rdata (s_rdata_i),
.s_axi_rresp (s_rresp_i),
.s_axi_rlast (s_rlast_i),
.s_axi_rvalid (s_rvalid_i),
.s_axi_rready (s_rready_i),
.m_axi_awaddr (m_axi_awaddr),
.m_axi_awprot (m_axi_awprot),
.m_axi_awvalid (m_axi_awvalid),
.m_axi_awready (m_axi_awready),
.m_axi_wdata (m_axi_wdata),
.m_axi_wstrb (m_axi_wstrb),
.m_axi_wvalid (m_axi_wvalid),
.m_axi_wready (m_axi_wready),
.m_axi_bresp (m_axi_bresp),
.m_axi_bvalid (m_axi_bvalid),
.m_axi_bready (m_axi_bready),
.m_axi_araddr (m_axi_araddr),
.m_axi_arprot (m_axi_arprot),
.m_axi_arvalid (m_axi_arvalid),
.m_axi_arready (m_axi_arready),
.m_axi_rdata (m_axi_rdata),
.m_axi_rresp (m_axi_rresp),
.m_axi_rvalid (m_axi_rvalid),
.m_axi_rready (m_axi_rready)
);
end else begin : gen_axilite_conv
axi_protocol_converter_v2_1_axilite_conv #(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_ADDR_WIDTH (C_AXI_ADDR_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_SUPPORTS_WRITE (C_AXI_SUPPORTS_WRITE),
.C_AXI_SUPPORTS_READ (C_AXI_SUPPORTS_READ),
.C_AXI_RUSER_WIDTH (C_AXI_RUSER_WIDTH),
.C_AXI_BUSER_WIDTH (C_AXI_BUSER_WIDTH)
) axilite_conv_inst (
.ARESETN (aresetn),
.ACLK (aclk),
.S_AXI_AWID (s_axi_awid),
.S_AXI_AWADDR (s_axi_awaddr),
.S_AXI_AWPROT (s_axi_awprot),
.S_AXI_AWVALID (s_awvalid_i),
.S_AXI_AWREADY (s_awready_i),
.S_AXI_WDATA (s_axi_wdata),
.S_AXI_WSTRB (s_axi_wstrb),
.S_AXI_WVALID (s_wvalid_i),
.S_AXI_WREADY (s_wready_i),
.S_AXI_BID (s_bid_i),
.S_AXI_BRESP (s_bresp_i),
.S_AXI_BUSER (s_buser_i),
.S_AXI_BVALID (s_bvalid_i),
.S_AXI_BREADY (s_bready_i),
.S_AXI_ARID (s_axi_arid),
.S_AXI_ARADDR (s_axi_araddr),
.S_AXI_ARPROT (s_axi_arprot),
.S_AXI_ARVALID (s_arvalid_i),
.S_AXI_ARREADY (s_arready_i),
.S_AXI_RID (s_rid_i),
.S_AXI_RDATA (s_rdata_i),
.S_AXI_RRESP (s_rresp_i),
.S_AXI_RLAST (s_rlast_i),
.S_AXI_RUSER (s_ruser_i),
.S_AXI_RVALID (s_rvalid_i),
.S_AXI_RREADY (s_rready_i),
.M_AXI_AWADDR (m_axi_awaddr),
.M_AXI_AWPROT (m_axi_awprot),
.M_AXI_AWVALID (m_axi_awvalid),
.M_AXI_AWREADY (m_axi_awready),
.M_AXI_WDATA (m_axi_wdata),
.M_AXI_WSTRB (m_axi_wstrb),
.M_AXI_WVALID (m_axi_wvalid),
.M_AXI_WREADY (m_axi_wready),
.M_AXI_BRESP (m_axi_bresp),
.M_AXI_BVALID (m_axi_bvalid),
.M_AXI_BREADY (m_axi_bready),
.M_AXI_ARADDR (m_axi_araddr),
.M_AXI_ARPROT (m_axi_arprot),
.M_AXI_ARVALID (m_axi_arvalid),
.M_AXI_ARREADY (m_axi_arready),
.M_AXI_RDATA (m_axi_rdata),
.M_AXI_RRESP (m_axi_rresp),
.M_AXI_RVALID (m_axi_rvalid),
.M_AXI_RREADY (m_axi_rready)
);
end
end else if ((C_M_AXI_PROTOCOL == P_AXI3) && (C_S_AXI_PROTOCOL == P_AXI4)) begin : gen_axi4_axi3
axi_protocol_converter_v2_1_axi3_conv #(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_ADDR_WIDTH (C_AXI_ADDR_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_SUPPORTS_USER_SIGNALS (C_AXI_SUPPORTS_USER_SIGNALS),
.C_AXI_AWUSER_WIDTH (C_AXI_AWUSER_WIDTH),
.C_AXI_ARUSER_WIDTH (C_AXI_ARUSER_WIDTH),
.C_AXI_WUSER_WIDTH (C_AXI_WUSER_WIDTH),
.C_AXI_RUSER_WIDTH (C_AXI_RUSER_WIDTH),
.C_AXI_BUSER_WIDTH (C_AXI_BUSER_WIDTH),
.C_AXI_SUPPORTS_WRITE (C_AXI_SUPPORTS_WRITE),
.C_AXI_SUPPORTS_READ (C_AXI_SUPPORTS_READ),
.C_SUPPORT_SPLITTING ((C_TRANSLATION_MODE == P_CONVERSION) ? 1 : 0)
) axi3_conv_inst (
.ARESETN (aresetn),
.ACLK (aclk),
.S_AXI_AWID (s_axi_awid),
.S_AXI_AWADDR (s_axi_awaddr),
.S_AXI_AWLEN (s_axi_awlen),
.S_AXI_AWSIZE (s_axi_awsize),
.S_AXI_AWBURST (s_axi_awburst),
.S_AXI_AWLOCK (s_axi_awlock),
.S_AXI_AWCACHE (s_axi_awcache),
.S_AXI_AWPROT (s_axi_awprot),
.S_AXI_AWQOS (s_axi_awqos),
.S_AXI_AWUSER (s_axi_awuser),
.S_AXI_AWVALID (s_awvalid_i),
.S_AXI_AWREADY (s_awready_i),
.S_AXI_WDATA (s_axi_wdata),
.S_AXI_WSTRB (s_axi_wstrb),
.S_AXI_WLAST (s_axi_wlast),
.S_AXI_WUSER (s_axi_wuser),
.S_AXI_WVALID (s_wvalid_i),
.S_AXI_WREADY (s_wready_i),
.S_AXI_BID (s_bid_i),
.S_AXI_BRESP (s_bresp_i),
.S_AXI_BUSER (s_buser_i),
.S_AXI_BVALID (s_bvalid_i),
.S_AXI_BREADY (s_bready_i),
.S_AXI_ARID (s_axi_arid),
.S_AXI_ARADDR (s_axi_araddr),
.S_AXI_ARLEN (s_axi_arlen),
.S_AXI_ARSIZE (s_axi_arsize),
.S_AXI_ARBURST (s_axi_arburst),
.S_AXI_ARLOCK (s_axi_arlock),
.S_AXI_ARCACHE (s_axi_arcache),
.S_AXI_ARPROT (s_axi_arprot),
.S_AXI_ARQOS (s_axi_arqos),
.S_AXI_ARUSER (s_axi_aruser),
.S_AXI_ARVALID (s_arvalid_i),
.S_AXI_ARREADY (s_arready_i),
.S_AXI_RID (s_rid_i),
.S_AXI_RDATA (s_rdata_i),
.S_AXI_RRESP (s_rresp_i),
.S_AXI_RLAST (s_rlast_i),
.S_AXI_RUSER (s_ruser_i),
.S_AXI_RVALID (s_rvalid_i),
.S_AXI_RREADY (s_rready_i),
.M_AXI_AWID (m_axi_awid),
.M_AXI_AWADDR (m_axi_awaddr),
.M_AXI_AWLEN (m_axi_awlen),
.M_AXI_AWSIZE (m_axi_awsize),
.M_AXI_AWBURST (m_axi_awburst),
.M_AXI_AWLOCK (m_axi_awlock),
.M_AXI_AWCACHE (m_axi_awcache),
.M_AXI_AWPROT (m_axi_awprot),
.M_AXI_AWQOS (m_axi_awqos),
.M_AXI_AWUSER (m_axi_awuser),
.M_AXI_AWVALID (m_axi_awvalid),
.M_AXI_AWREADY (m_axi_awready),
.M_AXI_WID (m_axi_wid),
.M_AXI_WDATA (m_axi_wdata),
.M_AXI_WSTRB (m_axi_wstrb),
.M_AXI_WLAST (m_axi_wlast),
.M_AXI_WUSER (m_axi_wuser),
.M_AXI_WVALID (m_axi_wvalid),
.M_AXI_WREADY (m_axi_wready),
.M_AXI_BID (m_axi_bid),
.M_AXI_BRESP (m_axi_bresp),
.M_AXI_BUSER (m_axi_buser),
.M_AXI_BVALID (m_axi_bvalid),
.M_AXI_BREADY (m_axi_bready),
.M_AXI_ARID (m_axi_arid),
.M_AXI_ARADDR (m_axi_araddr),
.M_AXI_ARLEN (m_axi_arlen),
.M_AXI_ARSIZE (m_axi_arsize),
.M_AXI_ARBURST (m_axi_arburst),
.M_AXI_ARLOCK (m_axi_arlock),
.M_AXI_ARCACHE (m_axi_arcache),
.M_AXI_ARPROT (m_axi_arprot),
.M_AXI_ARQOS (m_axi_arqos),
.M_AXI_ARUSER (m_axi_aruser),
.M_AXI_ARVALID (m_axi_arvalid),
.M_AXI_ARREADY (m_axi_arready),
.M_AXI_RID (m_axi_rid),
.M_AXI_RDATA (m_axi_rdata),
.M_AXI_RRESP (m_axi_rresp),
.M_AXI_RLAST (m_axi_rlast),
.M_AXI_RUSER (m_axi_ruser),
.M_AXI_RVALID (m_axi_rvalid),
.M_AXI_RREADY (m_axi_rready)
);
assign m_axi_awregion = 0;
assign m_axi_arregion = 0;
end else if ((C_S_AXI_PROTOCOL == P_AXI3) && (C_M_AXI_PROTOCOL == P_AXI4)) begin : gen_axi3_axi4
assign m_axi_awid = s_axi_awid;
assign m_axi_awaddr = s_axi_awaddr;
assign m_axi_awlen = {4'h0, s_axi_awlen[3:0]};
assign m_axi_awsize = s_axi_awsize;
assign m_axi_awburst = s_axi_awburst;
assign m_axi_awlock = s_axi_awlock[0];
assign m_axi_awcache = s_axi_awcache;
assign m_axi_awprot = s_axi_awprot;
assign m_axi_awregion = 4'h0;
assign m_axi_awqos = s_axi_awqos;
assign m_axi_awuser = s_axi_awuser;
assign m_axi_awvalid = s_awvalid_i;
assign s_awready_i = m_axi_awready;
assign m_axi_wid = {C_AXI_ID_WIDTH{1'b0}} ;
assign m_axi_wdata = s_axi_wdata;
assign m_axi_wstrb = s_axi_wstrb;
assign m_axi_wlast = s_axi_wlast;
assign m_axi_wuser = s_axi_wuser;
assign m_axi_wvalid = s_wvalid_i;
assign s_wready_i = m_axi_wready;
assign s_bid_i = m_axi_bid;
assign s_bresp_i = m_axi_bresp;
assign s_buser_i = m_axi_buser;
assign s_bvalid_i = m_axi_bvalid;
assign m_axi_bready = s_bready_i;
assign m_axi_arid = s_axi_arid;
assign m_axi_araddr = s_axi_araddr;
assign m_axi_arlen = {4'h0, s_axi_arlen[3:0]};
assign m_axi_arsize = s_axi_arsize;
assign m_axi_arburst = s_axi_arburst;
assign m_axi_arlock = s_axi_arlock[0];
assign m_axi_arcache = s_axi_arcache;
assign m_axi_arprot = s_axi_arprot;
assign m_axi_arregion = 4'h0;
assign m_axi_arqos = s_axi_arqos;
assign m_axi_aruser = s_axi_aruser;
assign m_axi_arvalid = s_arvalid_i;
assign s_arready_i = m_axi_arready;
assign s_rid_i = m_axi_rid;
assign s_rdata_i = m_axi_rdata;
assign s_rresp_i = m_axi_rresp;
assign s_rlast_i = m_axi_rlast;
assign s_ruser_i = m_axi_ruser;
assign s_rvalid_i = m_axi_rvalid;
assign m_axi_rready = s_rready_i;
end else begin :gen_no_conv
assign m_axi_awid = s_axi_awid;
assign m_axi_awaddr = s_axi_awaddr;
assign m_axi_awlen = s_axi_awlen;
assign m_axi_awsize = s_axi_awsize;
assign m_axi_awburst = s_axi_awburst;
assign m_axi_awlock = s_axi_awlock;
assign m_axi_awcache = s_axi_awcache;
assign m_axi_awprot = s_axi_awprot;
assign m_axi_awregion = s_axi_awregion;
assign m_axi_awqos = s_axi_awqos;
assign m_axi_awuser = s_axi_awuser;
assign m_axi_awvalid = s_awvalid_i;
assign s_awready_i = m_axi_awready;
assign m_axi_wid = s_axi_wid;
assign m_axi_wdata = s_axi_wdata;
assign m_axi_wstrb = s_axi_wstrb;
assign m_axi_wlast = s_axi_wlast;
assign m_axi_wuser = s_axi_wuser;
assign m_axi_wvalid = s_wvalid_i;
assign s_wready_i = m_axi_wready;
assign s_bid_i = m_axi_bid;
assign s_bresp_i = m_axi_bresp;
assign s_buser_i = m_axi_buser;
assign s_bvalid_i = m_axi_bvalid;
assign m_axi_bready = s_bready_i;
assign m_axi_arid = s_axi_arid;
assign m_axi_araddr = s_axi_araddr;
assign m_axi_arlen = s_axi_arlen;
assign m_axi_arsize = s_axi_arsize;
assign m_axi_arburst = s_axi_arburst;
assign m_axi_arlock = s_axi_arlock;
assign m_axi_arcache = s_axi_arcache;
assign m_axi_arprot = s_axi_arprot;
assign m_axi_arregion = s_axi_arregion;
assign m_axi_arqos = s_axi_arqos;
assign m_axi_aruser = s_axi_aruser;
assign m_axi_arvalid = s_arvalid_i;
assign s_arready_i = m_axi_arready;
assign s_rid_i = m_axi_rid;
assign s_rdata_i = m_axi_rdata;
assign s_rresp_i = m_axi_rresp;
assign s_rlast_i = m_axi_rlast;
assign s_ruser_i = m_axi_ruser;
assign s_rvalid_i = m_axi_rvalid;
assign m_axi_rready = s_rready_i;
end
if ((C_TRANSLATION_MODE == P_PROTECTION) &&
(((C_S_AXI_PROTOCOL != P_AXILITE) && (C_M_AXI_PROTOCOL == P_AXILITE)) ||
((C_S_AXI_PROTOCOL == P_AXI4) && (C_M_AXI_PROTOCOL == P_AXI3)))) begin : gen_err_detect
wire e_awvalid;
reg e_awvalid_r;
wire e_arvalid;
reg e_arvalid_r;
wire e_wvalid;
wire e_bvalid;
wire e_rvalid;
reg e_awready;
reg e_arready;
wire e_wready;
reg [C_AXI_ID_WIDTH-1:0] e_awid;
reg [C_AXI_ID_WIDTH-1:0] e_arid;
reg [8-1:0] e_arlen;
wire [C_AXI_ID_WIDTH-1:0] e_bid;
wire [C_AXI_ID_WIDTH-1:0] e_rid;
wire e_rlast;
wire w_err;
wire r_err;
wire busy_aw;
wire busy_w;
wire busy_ar;
wire aw_push;
wire aw_pop;
wire w_pop;
wire ar_push;
wire ar_pop;
reg s_awvalid_pending;
reg s_awvalid_en;
reg s_arvalid_en;
reg s_awready_en;
reg s_arready_en;
reg [4:0] aw_cnt;
reg [4:0] ar_cnt;
reg [4:0] w_cnt;
reg w_borrow;
reg err_busy_w;
reg err_busy_r;
assign w_err = (C_M_AXI_PROTOCOL == P_AXILITE) ? (s_axi_awlen != 0) : ((s_axi_awlen>>4) != 0);
assign r_err = (C_M_AXI_PROTOCOL == P_AXILITE) ? (s_axi_arlen != 0) : ((s_axi_arlen>>4) != 0);
assign s_awvalid_i = s_axi_awvalid & s_awvalid_en & ~w_err;
assign e_awvalid = e_awvalid_r & ~busy_aw & ~busy_w;
assign s_arvalid_i = s_axi_arvalid & s_arvalid_en & ~r_err;
assign e_arvalid = e_arvalid_r & ~busy_ar ;
assign s_wvalid_i = s_axi_wvalid & (busy_w | (s_awvalid_pending & ~w_borrow));
assign e_wvalid = s_axi_wvalid & err_busy_w;
assign s_bready_i = s_axi_bready & busy_aw;
assign s_rready_i = s_axi_rready & busy_ar;
assign s_axi_awready = (s_awready_i & s_awready_en) | e_awready;
assign s_axi_wready = (s_wready_i & (busy_w | (s_awvalid_pending & ~w_borrow))) | e_wready;
assign s_axi_bvalid = (s_bvalid_i & busy_aw) | e_bvalid;
assign s_axi_bid = err_busy_w ? e_bid : s_bid_i;
assign s_axi_bresp = err_busy_w ? P_SLVERR : s_bresp_i;
assign s_axi_buser = err_busy_w ? {C_AXI_BUSER_WIDTH{1'b0}} : s_buser_i;
assign s_axi_arready = (s_arready_i & s_arready_en) | e_arready;
assign s_axi_rvalid = (s_rvalid_i & busy_ar) | e_rvalid;
assign s_axi_rid = err_busy_r ? e_rid : s_rid_i;
assign s_axi_rresp = err_busy_r ? P_SLVERR : s_rresp_i;
assign s_axi_ruser = err_busy_r ? {C_AXI_RUSER_WIDTH{1'b0}} : s_ruser_i;
assign s_axi_rdata = err_busy_r ? {C_AXI_DATA_WIDTH{1'b0}} : s_rdata_i;
assign s_axi_rlast = err_busy_r ? e_rlast : s_rlast_i;
assign busy_aw = (aw_cnt != 0);
assign busy_w = (w_cnt != 0);
assign busy_ar = (ar_cnt != 0);
assign aw_push = s_awvalid_i & s_awready_i & s_awready_en;
assign aw_pop = s_bvalid_i & s_bready_i;
assign w_pop = s_wvalid_i & s_wready_i & s_axi_wlast;
assign ar_push = s_arvalid_i & s_arready_i & s_arready_en;
assign ar_pop = s_rvalid_i & s_rready_i & s_rlast_i;
always @(posedge aclk) begin
if (~aresetn) begin
s_awvalid_en <= 1'b0;
s_arvalid_en <= 1'b0;
s_awready_en <= 1'b0;
s_arready_en <= 1'b0;
e_awvalid_r <= 1'b0;
e_arvalid_r <= 1'b0;
e_awready <= 1'b0;
e_arready <= 1'b0;
aw_cnt <= 0;
w_cnt <= 0;
ar_cnt <= 0;
err_busy_w <= 1'b0;
err_busy_r <= 1'b0;
w_borrow <= 1'b0;
s_awvalid_pending <= 1'b0;
end else begin
e_awready <= 1'b0; // One-cycle pulse
if (e_bvalid & s_axi_bready) begin
s_awvalid_en <= 1'b1;
s_awready_en <= 1'b1;
err_busy_w <= 1'b0;
end else if (e_awvalid) begin
e_awvalid_r <= 1'b0;
err_busy_w <= 1'b1;
end else if (s_axi_awvalid & w_err & ~e_awvalid_r & ~err_busy_w) begin
e_awvalid_r <= 1'b1;
e_awready <= ~(s_awready_i & s_awvalid_en); // 1-cycle pulse if awready not already asserted
s_awvalid_en <= 1'b0;
s_awready_en <= 1'b0;
end else if ((&aw_cnt) | (&w_cnt) | aw_push) begin
s_awvalid_en <= 1'b0;
s_awready_en <= 1'b0;
end else if (~err_busy_w & ~e_awvalid_r & ~(s_axi_awvalid & w_err)) begin
s_awvalid_en <= 1'b1;
s_awready_en <= 1'b1;
end
if (aw_push & ~aw_pop) begin
aw_cnt <= aw_cnt + 1;
end else if (~aw_push & aw_pop & (|aw_cnt)) begin
aw_cnt <= aw_cnt - 1;
end
if (aw_push) begin
if (~w_pop & ~w_borrow) begin
w_cnt <= w_cnt + 1;
end
w_borrow <= 1'b0;
end else if (~aw_push & w_pop) begin
if (|w_cnt) begin
w_cnt <= w_cnt - 1;
end else begin
w_borrow <= 1'b1;
end
end
s_awvalid_pending <= s_awvalid_i & ~s_awready_i;
e_arready <= 1'b0; // One-cycle pulse
if (e_rvalid & s_axi_rready & e_rlast) begin
s_arvalid_en <= 1'b1;
s_arready_en <= 1'b1;
err_busy_r <= 1'b0;
end else if (e_arvalid) begin
e_arvalid_r <= 1'b0;
err_busy_r <= 1'b1;
end else if (s_axi_arvalid & r_err & ~e_arvalid_r & ~err_busy_r) begin
e_arvalid_r <= 1'b1;
e_arready <= ~(s_arready_i & s_arvalid_en); // 1-cycle pulse if arready not already asserted
s_arvalid_en <= 1'b0;
s_arready_en <= 1'b0;
end else if ((&ar_cnt) | ar_push) begin
s_arvalid_en <= 1'b0;
s_arready_en <= 1'b0;
end else if (~err_busy_r & ~e_arvalid_r & ~(s_axi_arvalid & r_err)) begin
s_arvalid_en <= 1'b1;
s_arready_en <= 1'b1;
end
if (ar_push & ~ar_pop) begin
ar_cnt <= ar_cnt + 1;
end else if (~ar_push & ar_pop & (|ar_cnt)) begin
ar_cnt <= ar_cnt - 1;
end
end
end
always @(posedge aclk) begin
if (s_axi_awvalid & ~err_busy_w & ~e_awvalid_r ) begin
e_awid <= s_axi_awid;
end
if (s_axi_arvalid & ~err_busy_r & ~e_arvalid_r ) begin
e_arid <= s_axi_arid;
e_arlen <= s_axi_arlen;
end
end
axi_protocol_converter_v2_1_decerr_slave #
(
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_RUSER_WIDTH (C_AXI_RUSER_WIDTH),
.C_AXI_BUSER_WIDTH (C_AXI_BUSER_WIDTH),
.C_AXI_PROTOCOL (C_S_AXI_PROTOCOL),
.C_RESP (P_SLVERR),
.C_IGNORE_ID (C_IGNORE_ID)
)
decerr_slave_inst
(
.ACLK (aclk),
.ARESETN (aresetn),
.S_AXI_AWID (e_awid),
.S_AXI_AWVALID (e_awvalid),
.S_AXI_AWREADY (),
.S_AXI_WLAST (s_axi_wlast),
.S_AXI_WVALID (e_wvalid),
.S_AXI_WREADY (e_wready),
.S_AXI_BID (e_bid),
.S_AXI_BRESP (),
.S_AXI_BUSER (),
.S_AXI_BVALID (e_bvalid),
.S_AXI_BREADY (s_axi_bready),
.S_AXI_ARID (e_arid),
.S_AXI_ARLEN (e_arlen),
.S_AXI_ARVALID (e_arvalid),
.S_AXI_ARREADY (),
.S_AXI_RID (e_rid),
.S_AXI_RDATA (),
.S_AXI_RRESP (),
.S_AXI_RUSER (),
.S_AXI_RLAST (e_rlast),
.S_AXI_RVALID (e_rvalid),
.S_AXI_RREADY (s_axi_rready)
);
end else begin : gen_no_err_detect
assign s_awvalid_i = s_axi_awvalid;
assign s_arvalid_i = s_axi_arvalid;
assign s_wvalid_i = s_axi_wvalid;
assign s_bready_i = s_axi_bready;
assign s_rready_i = s_axi_rready;
assign s_axi_awready = s_awready_i;
assign s_axi_wready = s_wready_i;
assign s_axi_bvalid = s_bvalid_i;
assign s_axi_bid = s_bid_i;
assign s_axi_bresp = s_bresp_i;
assign s_axi_buser = s_buser_i;
assign s_axi_arready = s_arready_i;
assign s_axi_rvalid = s_rvalid_i;
assign s_axi_rid = s_rid_i;
assign s_axi_rresp = s_rresp_i;
assign s_axi_ruser = s_ruser_i;
assign s_axi_rdata = s_rdata_i;
assign s_axi_rlast = s_rlast_i;
end // gen_err_detect
endgenerate
endmodule
`default_nettype wire
|
// -- (c) Copyright 2012 -2013 Xilinx, Inc. All rights reserved.
// --
// -- This file contains confidential and proprietary information
// -- of Xilinx, Inc. and is protected under U.S. and
// -- international copyright and other intellectual property
// -- laws.
// --
// -- DISCLAIMER
// -- This disclaimer is not a license and does not grant any
// -- rights to the materials distributed herewith. Except as
// -- otherwise provided in a valid license issued to you by
// -- Xilinx, and to the maximum extent permitted by applicable
// -- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// -- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// -- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// -- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// -- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// -- (2) Xilinx shall not be liable (whether in contract or tort,
// -- including negligence, or under any other theory of
// -- liability) for any loss or damage of any kind or nature
// -- related to, arising under or in connection with these
// -- materials, including for any direct, or any indirect,
// -- special, incidental, or consequential loss or damage
// -- (including loss of data, profits, goodwill, or any type of
// -- loss or damage suffered as a result of any action brought
// -- by a third party) even if such damage or loss was
// -- reasonably foreseeable or Xilinx had been advised of the
// -- possibility of the same.
// --
// -- CRITICAL APPLICATIONS
// -- Xilinx products are not designed or intended to be fail-
// -- safe, or for use in any application requiring fail-safe
// -- performance, such as life-support or safety devices or
// -- systems, Class III medical devices, nuclear facilities,
// -- applications related to the deployment of airbags, or any
// -- other applications that could lead to death, personal
// -- injury, or severe property or environmental damage
// -- (individually and collectively, "Critical
// -- Applications"). Customer assumes the sole risk and
// -- liability of any use of Xilinx products in Critical
// -- Applications, subject only to applicable laws and
// -- regulations governing limitations on product liability.
// --
// -- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// -- PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
//
// File name: axi_protocol_converter.v
//
// Description:
// This module is a bank of AXI4-Lite and AXI3 protocol converters for a vectored AXI interface.
// The interface of this module consists of a vectored slave and master interface
// which are each concatenations of upper-level AXI pathways,
// plus various vectored parameters.
// This module instantiates a set of individual protocol converter modules.
//
//-----------------------------------------------------------------------------
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_axi_protocol_converter #(
parameter C_FAMILY = "virtex6",
parameter integer C_M_AXI_PROTOCOL = 0,
parameter integer C_S_AXI_PROTOCOL = 0,
parameter integer C_IGNORE_ID = 0,
// 0 = RID/BID are stored by axilite_conv.
// 1 = RID/BID have already been stored in an upstream device, like SASD crossbar.
parameter integer C_AXI_ID_WIDTH = 4,
parameter integer C_AXI_ADDR_WIDTH = 32,
parameter integer C_AXI_DATA_WIDTH = 32,
parameter integer C_AXI_SUPPORTS_WRITE = 1,
parameter integer C_AXI_SUPPORTS_READ = 1,
parameter integer C_AXI_SUPPORTS_USER_SIGNALS = 0,
// 1 = Propagate all USER signals, 0 = Dont propagate.
parameter integer C_AXI_AWUSER_WIDTH = 1,
parameter integer C_AXI_ARUSER_WIDTH = 1,
parameter integer C_AXI_WUSER_WIDTH = 1,
parameter integer C_AXI_RUSER_WIDTH = 1,
parameter integer C_AXI_BUSER_WIDTH = 1,
parameter integer C_TRANSLATION_MODE = 1
// 0 (Unprotected) = Disable all error checking; master is well-behaved.
// 1 (Protection) = Detect SI transaction violations, but perform no splitting.
// AXI4 -> AXI3 must be <= 16 beats; AXI4/3 -> AXI4LITE must be single.
// 2 (Conversion) = Include transaction splitting logic
) (
// Global Signals
input wire aclk,
input wire aresetn,
// Slave Interface Write Address Ports
input wire [C_AXI_ID_WIDTH-1:0] s_axi_awid,
input wire [C_AXI_ADDR_WIDTH-1:0] s_axi_awaddr,
input wire [((C_S_AXI_PROTOCOL == 1) ? 4 : 8)-1:0] s_axi_awlen,
input wire [3-1:0] s_axi_awsize,
input wire [2-1:0] s_axi_awburst,
input wire [((C_S_AXI_PROTOCOL == 1) ? 2 : 1)-1:0] s_axi_awlock,
input wire [4-1:0] s_axi_awcache,
input wire [3-1:0] s_axi_awprot,
input wire [4-1:0] s_axi_awregion,
input wire [4-1:0] s_axi_awqos,
input wire [C_AXI_AWUSER_WIDTH-1:0] s_axi_awuser,
input wire s_axi_awvalid,
output wire s_axi_awready,
// Slave Interface Write Data Ports
input wire [C_AXI_ID_WIDTH-1:0] s_axi_wid,
input wire [C_AXI_DATA_WIDTH-1:0] s_axi_wdata,
input wire [C_AXI_DATA_WIDTH/8-1:0] s_axi_wstrb,
input wire s_axi_wlast,
input wire [C_AXI_WUSER_WIDTH-1:0] s_axi_wuser,
input wire s_axi_wvalid,
output wire s_axi_wready,
// Slave Interface Write Response Ports
output wire [C_AXI_ID_WIDTH-1:0] s_axi_bid,
output wire [2-1:0] s_axi_bresp,
output wire [C_AXI_BUSER_WIDTH-1:0] s_axi_buser,
output wire s_axi_bvalid,
input wire s_axi_bready,
// Slave Interface Read Address Ports
input wire [C_AXI_ID_WIDTH-1:0] s_axi_arid,
input wire [C_AXI_ADDR_WIDTH-1:0] s_axi_araddr,
input wire [((C_S_AXI_PROTOCOL == 1) ? 4 : 8)-1:0] s_axi_arlen,
input wire [3-1:0] s_axi_arsize,
input wire [2-1:0] s_axi_arburst,
input wire [((C_S_AXI_PROTOCOL == 1) ? 2 : 1)-1:0] s_axi_arlock,
input wire [4-1:0] s_axi_arcache,
input wire [3-1:0] s_axi_arprot,
input wire [4-1:0] s_axi_arregion,
input wire [4-1:0] s_axi_arqos,
input wire [C_AXI_ARUSER_WIDTH-1:0] s_axi_aruser,
input wire s_axi_arvalid,
output wire s_axi_arready,
// Slave Interface Read Data Ports
output wire [C_AXI_ID_WIDTH-1:0] s_axi_rid,
output wire [C_AXI_DATA_WIDTH-1:0] s_axi_rdata,
output wire [2-1:0] s_axi_rresp,
output wire s_axi_rlast,
output wire [C_AXI_RUSER_WIDTH-1:0] s_axi_ruser,
output wire s_axi_rvalid,
input wire s_axi_rready,
// Master Interface Write Address Port
output wire [C_AXI_ID_WIDTH-1:0] m_axi_awid,
output wire [C_AXI_ADDR_WIDTH-1:0] m_axi_awaddr,
output wire [((C_M_AXI_PROTOCOL == 1) ? 4 : 8)-1:0] m_axi_awlen,
output wire [3-1:0] m_axi_awsize,
output wire [2-1:0] m_axi_awburst,
output wire [((C_M_AXI_PROTOCOL == 1) ? 2 : 1)-1:0] m_axi_awlock,
output wire [4-1:0] m_axi_awcache,
output wire [3-1:0] m_axi_awprot,
output wire [4-1:0] m_axi_awregion,
output wire [4-1:0] m_axi_awqos,
output wire [C_AXI_AWUSER_WIDTH-1:0] m_axi_awuser,
output wire m_axi_awvalid,
input wire m_axi_awready,
// Master Interface Write Data Ports
output wire [C_AXI_ID_WIDTH-1:0] m_axi_wid,
output wire [C_AXI_DATA_WIDTH-1:0] m_axi_wdata,
output wire [C_AXI_DATA_WIDTH/8-1:0] m_axi_wstrb,
output wire m_axi_wlast,
output wire [C_AXI_WUSER_WIDTH-1:0] m_axi_wuser,
output wire m_axi_wvalid,
input wire m_axi_wready,
// Master Interface Write Response Ports
input wire [C_AXI_ID_WIDTH-1:0] m_axi_bid,
input wire [2-1:0] m_axi_bresp,
input wire [C_AXI_BUSER_WIDTH-1:0] m_axi_buser,
input wire m_axi_bvalid,
output wire m_axi_bready,
// Master Interface Read Address Port
output wire [C_AXI_ID_WIDTH-1:0] m_axi_arid,
output wire [C_AXI_ADDR_WIDTH-1:0] m_axi_araddr,
output wire [((C_M_AXI_PROTOCOL == 1) ? 4 : 8)-1:0] m_axi_arlen,
output wire [3-1:0] m_axi_arsize,
output wire [2-1:0] m_axi_arburst,
output wire [((C_M_AXI_PROTOCOL == 1) ? 2 : 1)-1:0] m_axi_arlock,
output wire [4-1:0] m_axi_arcache,
output wire [3-1:0] m_axi_arprot,
output wire [4-1:0] m_axi_arregion,
output wire [4-1:0] m_axi_arqos,
output wire [C_AXI_ARUSER_WIDTH-1:0] m_axi_aruser,
output wire m_axi_arvalid,
input wire m_axi_arready,
// Master Interface Read Data Ports
input wire [C_AXI_ID_WIDTH-1:0] m_axi_rid,
input wire [C_AXI_DATA_WIDTH-1:0] m_axi_rdata,
input wire [2-1:0] m_axi_rresp,
input wire m_axi_rlast,
input wire [C_AXI_RUSER_WIDTH-1:0] m_axi_ruser,
input wire m_axi_rvalid,
output wire m_axi_rready
);
localparam P_AXI4 = 32'h0;
localparam P_AXI3 = 32'h1;
localparam P_AXILITE = 32'h2;
localparam P_AXILITE_SIZE = (C_AXI_DATA_WIDTH == 32) ? 3'b010 : 3'b011;
localparam P_INCR = 2'b01;
localparam P_DECERR = 2'b11;
localparam P_SLVERR = 2'b10;
localparam integer P_PROTECTION = 1;
localparam integer P_CONVERSION = 2;
wire s_awvalid_i;
wire s_arvalid_i;
wire s_wvalid_i ;
wire s_bready_i ;
wire s_rready_i ;
wire s_awready_i;
wire s_wready_i;
wire s_bvalid_i;
wire [C_AXI_ID_WIDTH-1:0] s_bid_i;
wire [1:0] s_bresp_i;
wire [C_AXI_BUSER_WIDTH-1:0] s_buser_i;
wire s_arready_i;
wire s_rvalid_i;
wire [C_AXI_ID_WIDTH-1:0] s_rid_i;
wire [1:0] s_rresp_i;
wire [C_AXI_RUSER_WIDTH-1:0] s_ruser_i;
wire [C_AXI_DATA_WIDTH-1:0] s_rdata_i;
wire s_rlast_i;
generate
if ((C_M_AXI_PROTOCOL == P_AXILITE) || (C_S_AXI_PROTOCOL == P_AXILITE)) begin : gen_axilite
assign m_axi_awid = 0;
assign m_axi_awlen = 0;
assign m_axi_awsize = P_AXILITE_SIZE;
assign m_axi_awburst = P_INCR;
assign m_axi_awlock = 0;
assign m_axi_awcache = 0;
assign m_axi_awregion = 0;
assign m_axi_awqos = 0;
assign m_axi_awuser = 0;
assign m_axi_wid = 0;
assign m_axi_wlast = 1'b1;
assign m_axi_wuser = 0;
assign m_axi_arid = 0;
assign m_axi_arlen = 0;
assign m_axi_arsize = P_AXILITE_SIZE;
assign m_axi_arburst = P_INCR;
assign m_axi_arlock = 0;
assign m_axi_arcache = 0;
assign m_axi_arregion = 0;
assign m_axi_arqos = 0;
assign m_axi_aruser = 0;
if (((C_IGNORE_ID == 1) && (C_TRANSLATION_MODE != P_CONVERSION)) || (C_S_AXI_PROTOCOL == P_AXILITE)) begin : gen_axilite_passthru
assign m_axi_awaddr = s_axi_awaddr;
assign m_axi_awprot = s_axi_awprot;
assign m_axi_awvalid = s_awvalid_i;
assign s_awready_i = m_axi_awready;
assign m_axi_wdata = s_axi_wdata;
assign m_axi_wstrb = s_axi_wstrb;
assign m_axi_wvalid = s_wvalid_i;
assign s_wready_i = m_axi_wready;
assign s_bid_i = 0;
assign s_bresp_i = m_axi_bresp;
assign s_buser_i = 0;
assign s_bvalid_i = m_axi_bvalid;
assign m_axi_bready = s_bready_i;
assign m_axi_araddr = s_axi_araddr;
assign m_axi_arprot = s_axi_arprot;
assign m_axi_arvalid = s_arvalid_i;
assign s_arready_i = m_axi_arready;
assign s_rid_i = 0;
assign s_rdata_i = m_axi_rdata;
assign s_rresp_i = m_axi_rresp;
assign s_rlast_i = 1'b1;
assign s_ruser_i = 0;
assign s_rvalid_i = m_axi_rvalid;
assign m_axi_rready = s_rready_i;
end else if (C_TRANSLATION_MODE == P_CONVERSION) begin : gen_b2s_conv
assign s_buser_i = {C_AXI_BUSER_WIDTH{1'b0}};
assign s_ruser_i = {C_AXI_RUSER_WIDTH{1'b0}};
axi_protocol_converter_v2_1_b2s #(
.C_S_AXI_PROTOCOL (C_S_AXI_PROTOCOL),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_ADDR_WIDTH (C_AXI_ADDR_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_SUPPORTS_WRITE (C_AXI_SUPPORTS_WRITE),
.C_AXI_SUPPORTS_READ (C_AXI_SUPPORTS_READ)
) axilite_b2s (
.aresetn (aresetn),
.aclk (aclk),
.s_axi_awid (s_axi_awid),
.s_axi_awaddr (s_axi_awaddr),
.s_axi_awlen (s_axi_awlen),
.s_axi_awsize (s_axi_awsize),
.s_axi_awburst (s_axi_awburst),
.s_axi_awprot (s_axi_awprot),
.s_axi_awvalid (s_awvalid_i),
.s_axi_awready (s_awready_i),
.s_axi_wdata (s_axi_wdata),
.s_axi_wstrb (s_axi_wstrb),
.s_axi_wlast (s_axi_wlast),
.s_axi_wvalid (s_wvalid_i),
.s_axi_wready (s_wready_i),
.s_axi_bid (s_bid_i),
.s_axi_bresp (s_bresp_i),
.s_axi_bvalid (s_bvalid_i),
.s_axi_bready (s_bready_i),
.s_axi_arid (s_axi_arid),
.s_axi_araddr (s_axi_araddr),
.s_axi_arlen (s_axi_arlen),
.s_axi_arsize (s_axi_arsize),
.s_axi_arburst (s_axi_arburst),
.s_axi_arprot (s_axi_arprot),
.s_axi_arvalid (s_arvalid_i),
.s_axi_arready (s_arready_i),
.s_axi_rid (s_rid_i),
.s_axi_rdata (s_rdata_i),
.s_axi_rresp (s_rresp_i),
.s_axi_rlast (s_rlast_i),
.s_axi_rvalid (s_rvalid_i),
.s_axi_rready (s_rready_i),
.m_axi_awaddr (m_axi_awaddr),
.m_axi_awprot (m_axi_awprot),
.m_axi_awvalid (m_axi_awvalid),
.m_axi_awready (m_axi_awready),
.m_axi_wdata (m_axi_wdata),
.m_axi_wstrb (m_axi_wstrb),
.m_axi_wvalid (m_axi_wvalid),
.m_axi_wready (m_axi_wready),
.m_axi_bresp (m_axi_bresp),
.m_axi_bvalid (m_axi_bvalid),
.m_axi_bready (m_axi_bready),
.m_axi_araddr (m_axi_araddr),
.m_axi_arprot (m_axi_arprot),
.m_axi_arvalid (m_axi_arvalid),
.m_axi_arready (m_axi_arready),
.m_axi_rdata (m_axi_rdata),
.m_axi_rresp (m_axi_rresp),
.m_axi_rvalid (m_axi_rvalid),
.m_axi_rready (m_axi_rready)
);
end else begin : gen_axilite_conv
axi_protocol_converter_v2_1_axilite_conv #(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_ADDR_WIDTH (C_AXI_ADDR_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_SUPPORTS_WRITE (C_AXI_SUPPORTS_WRITE),
.C_AXI_SUPPORTS_READ (C_AXI_SUPPORTS_READ),
.C_AXI_RUSER_WIDTH (C_AXI_RUSER_WIDTH),
.C_AXI_BUSER_WIDTH (C_AXI_BUSER_WIDTH)
) axilite_conv_inst (
.ARESETN (aresetn),
.ACLK (aclk),
.S_AXI_AWID (s_axi_awid),
.S_AXI_AWADDR (s_axi_awaddr),
.S_AXI_AWPROT (s_axi_awprot),
.S_AXI_AWVALID (s_awvalid_i),
.S_AXI_AWREADY (s_awready_i),
.S_AXI_WDATA (s_axi_wdata),
.S_AXI_WSTRB (s_axi_wstrb),
.S_AXI_WVALID (s_wvalid_i),
.S_AXI_WREADY (s_wready_i),
.S_AXI_BID (s_bid_i),
.S_AXI_BRESP (s_bresp_i),
.S_AXI_BUSER (s_buser_i),
.S_AXI_BVALID (s_bvalid_i),
.S_AXI_BREADY (s_bready_i),
.S_AXI_ARID (s_axi_arid),
.S_AXI_ARADDR (s_axi_araddr),
.S_AXI_ARPROT (s_axi_arprot),
.S_AXI_ARVALID (s_arvalid_i),
.S_AXI_ARREADY (s_arready_i),
.S_AXI_RID (s_rid_i),
.S_AXI_RDATA (s_rdata_i),
.S_AXI_RRESP (s_rresp_i),
.S_AXI_RLAST (s_rlast_i),
.S_AXI_RUSER (s_ruser_i),
.S_AXI_RVALID (s_rvalid_i),
.S_AXI_RREADY (s_rready_i),
.M_AXI_AWADDR (m_axi_awaddr),
.M_AXI_AWPROT (m_axi_awprot),
.M_AXI_AWVALID (m_axi_awvalid),
.M_AXI_AWREADY (m_axi_awready),
.M_AXI_WDATA (m_axi_wdata),
.M_AXI_WSTRB (m_axi_wstrb),
.M_AXI_WVALID (m_axi_wvalid),
.M_AXI_WREADY (m_axi_wready),
.M_AXI_BRESP (m_axi_bresp),
.M_AXI_BVALID (m_axi_bvalid),
.M_AXI_BREADY (m_axi_bready),
.M_AXI_ARADDR (m_axi_araddr),
.M_AXI_ARPROT (m_axi_arprot),
.M_AXI_ARVALID (m_axi_arvalid),
.M_AXI_ARREADY (m_axi_arready),
.M_AXI_RDATA (m_axi_rdata),
.M_AXI_RRESP (m_axi_rresp),
.M_AXI_RVALID (m_axi_rvalid),
.M_AXI_RREADY (m_axi_rready)
);
end
end else if ((C_M_AXI_PROTOCOL == P_AXI3) && (C_S_AXI_PROTOCOL == P_AXI4)) begin : gen_axi4_axi3
axi_protocol_converter_v2_1_axi3_conv #(
.C_FAMILY (C_FAMILY),
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_ADDR_WIDTH (C_AXI_ADDR_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_SUPPORTS_USER_SIGNALS (C_AXI_SUPPORTS_USER_SIGNALS),
.C_AXI_AWUSER_WIDTH (C_AXI_AWUSER_WIDTH),
.C_AXI_ARUSER_WIDTH (C_AXI_ARUSER_WIDTH),
.C_AXI_WUSER_WIDTH (C_AXI_WUSER_WIDTH),
.C_AXI_RUSER_WIDTH (C_AXI_RUSER_WIDTH),
.C_AXI_BUSER_WIDTH (C_AXI_BUSER_WIDTH),
.C_AXI_SUPPORTS_WRITE (C_AXI_SUPPORTS_WRITE),
.C_AXI_SUPPORTS_READ (C_AXI_SUPPORTS_READ),
.C_SUPPORT_SPLITTING ((C_TRANSLATION_MODE == P_CONVERSION) ? 1 : 0)
) axi3_conv_inst (
.ARESETN (aresetn),
.ACLK (aclk),
.S_AXI_AWID (s_axi_awid),
.S_AXI_AWADDR (s_axi_awaddr),
.S_AXI_AWLEN (s_axi_awlen),
.S_AXI_AWSIZE (s_axi_awsize),
.S_AXI_AWBURST (s_axi_awburst),
.S_AXI_AWLOCK (s_axi_awlock),
.S_AXI_AWCACHE (s_axi_awcache),
.S_AXI_AWPROT (s_axi_awprot),
.S_AXI_AWQOS (s_axi_awqos),
.S_AXI_AWUSER (s_axi_awuser),
.S_AXI_AWVALID (s_awvalid_i),
.S_AXI_AWREADY (s_awready_i),
.S_AXI_WDATA (s_axi_wdata),
.S_AXI_WSTRB (s_axi_wstrb),
.S_AXI_WLAST (s_axi_wlast),
.S_AXI_WUSER (s_axi_wuser),
.S_AXI_WVALID (s_wvalid_i),
.S_AXI_WREADY (s_wready_i),
.S_AXI_BID (s_bid_i),
.S_AXI_BRESP (s_bresp_i),
.S_AXI_BUSER (s_buser_i),
.S_AXI_BVALID (s_bvalid_i),
.S_AXI_BREADY (s_bready_i),
.S_AXI_ARID (s_axi_arid),
.S_AXI_ARADDR (s_axi_araddr),
.S_AXI_ARLEN (s_axi_arlen),
.S_AXI_ARSIZE (s_axi_arsize),
.S_AXI_ARBURST (s_axi_arburst),
.S_AXI_ARLOCK (s_axi_arlock),
.S_AXI_ARCACHE (s_axi_arcache),
.S_AXI_ARPROT (s_axi_arprot),
.S_AXI_ARQOS (s_axi_arqos),
.S_AXI_ARUSER (s_axi_aruser),
.S_AXI_ARVALID (s_arvalid_i),
.S_AXI_ARREADY (s_arready_i),
.S_AXI_RID (s_rid_i),
.S_AXI_RDATA (s_rdata_i),
.S_AXI_RRESP (s_rresp_i),
.S_AXI_RLAST (s_rlast_i),
.S_AXI_RUSER (s_ruser_i),
.S_AXI_RVALID (s_rvalid_i),
.S_AXI_RREADY (s_rready_i),
.M_AXI_AWID (m_axi_awid),
.M_AXI_AWADDR (m_axi_awaddr),
.M_AXI_AWLEN (m_axi_awlen),
.M_AXI_AWSIZE (m_axi_awsize),
.M_AXI_AWBURST (m_axi_awburst),
.M_AXI_AWLOCK (m_axi_awlock),
.M_AXI_AWCACHE (m_axi_awcache),
.M_AXI_AWPROT (m_axi_awprot),
.M_AXI_AWQOS (m_axi_awqos),
.M_AXI_AWUSER (m_axi_awuser),
.M_AXI_AWVALID (m_axi_awvalid),
.M_AXI_AWREADY (m_axi_awready),
.M_AXI_WID (m_axi_wid),
.M_AXI_WDATA (m_axi_wdata),
.M_AXI_WSTRB (m_axi_wstrb),
.M_AXI_WLAST (m_axi_wlast),
.M_AXI_WUSER (m_axi_wuser),
.M_AXI_WVALID (m_axi_wvalid),
.M_AXI_WREADY (m_axi_wready),
.M_AXI_BID (m_axi_bid),
.M_AXI_BRESP (m_axi_bresp),
.M_AXI_BUSER (m_axi_buser),
.M_AXI_BVALID (m_axi_bvalid),
.M_AXI_BREADY (m_axi_bready),
.M_AXI_ARID (m_axi_arid),
.M_AXI_ARADDR (m_axi_araddr),
.M_AXI_ARLEN (m_axi_arlen),
.M_AXI_ARSIZE (m_axi_arsize),
.M_AXI_ARBURST (m_axi_arburst),
.M_AXI_ARLOCK (m_axi_arlock),
.M_AXI_ARCACHE (m_axi_arcache),
.M_AXI_ARPROT (m_axi_arprot),
.M_AXI_ARQOS (m_axi_arqos),
.M_AXI_ARUSER (m_axi_aruser),
.M_AXI_ARVALID (m_axi_arvalid),
.M_AXI_ARREADY (m_axi_arready),
.M_AXI_RID (m_axi_rid),
.M_AXI_RDATA (m_axi_rdata),
.M_AXI_RRESP (m_axi_rresp),
.M_AXI_RLAST (m_axi_rlast),
.M_AXI_RUSER (m_axi_ruser),
.M_AXI_RVALID (m_axi_rvalid),
.M_AXI_RREADY (m_axi_rready)
);
assign m_axi_awregion = 0;
assign m_axi_arregion = 0;
end else if ((C_S_AXI_PROTOCOL == P_AXI3) && (C_M_AXI_PROTOCOL == P_AXI4)) begin : gen_axi3_axi4
assign m_axi_awid = s_axi_awid;
assign m_axi_awaddr = s_axi_awaddr;
assign m_axi_awlen = {4'h0, s_axi_awlen[3:0]};
assign m_axi_awsize = s_axi_awsize;
assign m_axi_awburst = s_axi_awburst;
assign m_axi_awlock = s_axi_awlock[0];
assign m_axi_awcache = s_axi_awcache;
assign m_axi_awprot = s_axi_awprot;
assign m_axi_awregion = 4'h0;
assign m_axi_awqos = s_axi_awqos;
assign m_axi_awuser = s_axi_awuser;
assign m_axi_awvalid = s_awvalid_i;
assign s_awready_i = m_axi_awready;
assign m_axi_wid = {C_AXI_ID_WIDTH{1'b0}} ;
assign m_axi_wdata = s_axi_wdata;
assign m_axi_wstrb = s_axi_wstrb;
assign m_axi_wlast = s_axi_wlast;
assign m_axi_wuser = s_axi_wuser;
assign m_axi_wvalid = s_wvalid_i;
assign s_wready_i = m_axi_wready;
assign s_bid_i = m_axi_bid;
assign s_bresp_i = m_axi_bresp;
assign s_buser_i = m_axi_buser;
assign s_bvalid_i = m_axi_bvalid;
assign m_axi_bready = s_bready_i;
assign m_axi_arid = s_axi_arid;
assign m_axi_araddr = s_axi_araddr;
assign m_axi_arlen = {4'h0, s_axi_arlen[3:0]};
assign m_axi_arsize = s_axi_arsize;
assign m_axi_arburst = s_axi_arburst;
assign m_axi_arlock = s_axi_arlock[0];
assign m_axi_arcache = s_axi_arcache;
assign m_axi_arprot = s_axi_arprot;
assign m_axi_arregion = 4'h0;
assign m_axi_arqos = s_axi_arqos;
assign m_axi_aruser = s_axi_aruser;
assign m_axi_arvalid = s_arvalid_i;
assign s_arready_i = m_axi_arready;
assign s_rid_i = m_axi_rid;
assign s_rdata_i = m_axi_rdata;
assign s_rresp_i = m_axi_rresp;
assign s_rlast_i = m_axi_rlast;
assign s_ruser_i = m_axi_ruser;
assign s_rvalid_i = m_axi_rvalid;
assign m_axi_rready = s_rready_i;
end else begin :gen_no_conv
assign m_axi_awid = s_axi_awid;
assign m_axi_awaddr = s_axi_awaddr;
assign m_axi_awlen = s_axi_awlen;
assign m_axi_awsize = s_axi_awsize;
assign m_axi_awburst = s_axi_awburst;
assign m_axi_awlock = s_axi_awlock;
assign m_axi_awcache = s_axi_awcache;
assign m_axi_awprot = s_axi_awprot;
assign m_axi_awregion = s_axi_awregion;
assign m_axi_awqos = s_axi_awqos;
assign m_axi_awuser = s_axi_awuser;
assign m_axi_awvalid = s_awvalid_i;
assign s_awready_i = m_axi_awready;
assign m_axi_wid = s_axi_wid;
assign m_axi_wdata = s_axi_wdata;
assign m_axi_wstrb = s_axi_wstrb;
assign m_axi_wlast = s_axi_wlast;
assign m_axi_wuser = s_axi_wuser;
assign m_axi_wvalid = s_wvalid_i;
assign s_wready_i = m_axi_wready;
assign s_bid_i = m_axi_bid;
assign s_bresp_i = m_axi_bresp;
assign s_buser_i = m_axi_buser;
assign s_bvalid_i = m_axi_bvalid;
assign m_axi_bready = s_bready_i;
assign m_axi_arid = s_axi_arid;
assign m_axi_araddr = s_axi_araddr;
assign m_axi_arlen = s_axi_arlen;
assign m_axi_arsize = s_axi_arsize;
assign m_axi_arburst = s_axi_arburst;
assign m_axi_arlock = s_axi_arlock;
assign m_axi_arcache = s_axi_arcache;
assign m_axi_arprot = s_axi_arprot;
assign m_axi_arregion = s_axi_arregion;
assign m_axi_arqos = s_axi_arqos;
assign m_axi_aruser = s_axi_aruser;
assign m_axi_arvalid = s_arvalid_i;
assign s_arready_i = m_axi_arready;
assign s_rid_i = m_axi_rid;
assign s_rdata_i = m_axi_rdata;
assign s_rresp_i = m_axi_rresp;
assign s_rlast_i = m_axi_rlast;
assign s_ruser_i = m_axi_ruser;
assign s_rvalid_i = m_axi_rvalid;
assign m_axi_rready = s_rready_i;
end
if ((C_TRANSLATION_MODE == P_PROTECTION) &&
(((C_S_AXI_PROTOCOL != P_AXILITE) && (C_M_AXI_PROTOCOL == P_AXILITE)) ||
((C_S_AXI_PROTOCOL == P_AXI4) && (C_M_AXI_PROTOCOL == P_AXI3)))) begin : gen_err_detect
wire e_awvalid;
reg e_awvalid_r;
wire e_arvalid;
reg e_arvalid_r;
wire e_wvalid;
wire e_bvalid;
wire e_rvalid;
reg e_awready;
reg e_arready;
wire e_wready;
reg [C_AXI_ID_WIDTH-1:0] e_awid;
reg [C_AXI_ID_WIDTH-1:0] e_arid;
reg [8-1:0] e_arlen;
wire [C_AXI_ID_WIDTH-1:0] e_bid;
wire [C_AXI_ID_WIDTH-1:0] e_rid;
wire e_rlast;
wire w_err;
wire r_err;
wire busy_aw;
wire busy_w;
wire busy_ar;
wire aw_push;
wire aw_pop;
wire w_pop;
wire ar_push;
wire ar_pop;
reg s_awvalid_pending;
reg s_awvalid_en;
reg s_arvalid_en;
reg s_awready_en;
reg s_arready_en;
reg [4:0] aw_cnt;
reg [4:0] ar_cnt;
reg [4:0] w_cnt;
reg w_borrow;
reg err_busy_w;
reg err_busy_r;
assign w_err = (C_M_AXI_PROTOCOL == P_AXILITE) ? (s_axi_awlen != 0) : ((s_axi_awlen>>4) != 0);
assign r_err = (C_M_AXI_PROTOCOL == P_AXILITE) ? (s_axi_arlen != 0) : ((s_axi_arlen>>4) != 0);
assign s_awvalid_i = s_axi_awvalid & s_awvalid_en & ~w_err;
assign e_awvalid = e_awvalid_r & ~busy_aw & ~busy_w;
assign s_arvalid_i = s_axi_arvalid & s_arvalid_en & ~r_err;
assign e_arvalid = e_arvalid_r & ~busy_ar ;
assign s_wvalid_i = s_axi_wvalid & (busy_w | (s_awvalid_pending & ~w_borrow));
assign e_wvalid = s_axi_wvalid & err_busy_w;
assign s_bready_i = s_axi_bready & busy_aw;
assign s_rready_i = s_axi_rready & busy_ar;
assign s_axi_awready = (s_awready_i & s_awready_en) | e_awready;
assign s_axi_wready = (s_wready_i & (busy_w | (s_awvalid_pending & ~w_borrow))) | e_wready;
assign s_axi_bvalid = (s_bvalid_i & busy_aw) | e_bvalid;
assign s_axi_bid = err_busy_w ? e_bid : s_bid_i;
assign s_axi_bresp = err_busy_w ? P_SLVERR : s_bresp_i;
assign s_axi_buser = err_busy_w ? {C_AXI_BUSER_WIDTH{1'b0}} : s_buser_i;
assign s_axi_arready = (s_arready_i & s_arready_en) | e_arready;
assign s_axi_rvalid = (s_rvalid_i & busy_ar) | e_rvalid;
assign s_axi_rid = err_busy_r ? e_rid : s_rid_i;
assign s_axi_rresp = err_busy_r ? P_SLVERR : s_rresp_i;
assign s_axi_ruser = err_busy_r ? {C_AXI_RUSER_WIDTH{1'b0}} : s_ruser_i;
assign s_axi_rdata = err_busy_r ? {C_AXI_DATA_WIDTH{1'b0}} : s_rdata_i;
assign s_axi_rlast = err_busy_r ? e_rlast : s_rlast_i;
assign busy_aw = (aw_cnt != 0);
assign busy_w = (w_cnt != 0);
assign busy_ar = (ar_cnt != 0);
assign aw_push = s_awvalid_i & s_awready_i & s_awready_en;
assign aw_pop = s_bvalid_i & s_bready_i;
assign w_pop = s_wvalid_i & s_wready_i & s_axi_wlast;
assign ar_push = s_arvalid_i & s_arready_i & s_arready_en;
assign ar_pop = s_rvalid_i & s_rready_i & s_rlast_i;
always @(posedge aclk) begin
if (~aresetn) begin
s_awvalid_en <= 1'b0;
s_arvalid_en <= 1'b0;
s_awready_en <= 1'b0;
s_arready_en <= 1'b0;
e_awvalid_r <= 1'b0;
e_arvalid_r <= 1'b0;
e_awready <= 1'b0;
e_arready <= 1'b0;
aw_cnt <= 0;
w_cnt <= 0;
ar_cnt <= 0;
err_busy_w <= 1'b0;
err_busy_r <= 1'b0;
w_borrow <= 1'b0;
s_awvalid_pending <= 1'b0;
end else begin
e_awready <= 1'b0; // One-cycle pulse
if (e_bvalid & s_axi_bready) begin
s_awvalid_en <= 1'b1;
s_awready_en <= 1'b1;
err_busy_w <= 1'b0;
end else if (e_awvalid) begin
e_awvalid_r <= 1'b0;
err_busy_w <= 1'b1;
end else if (s_axi_awvalid & w_err & ~e_awvalid_r & ~err_busy_w) begin
e_awvalid_r <= 1'b1;
e_awready <= ~(s_awready_i & s_awvalid_en); // 1-cycle pulse if awready not already asserted
s_awvalid_en <= 1'b0;
s_awready_en <= 1'b0;
end else if ((&aw_cnt) | (&w_cnt) | aw_push) begin
s_awvalid_en <= 1'b0;
s_awready_en <= 1'b0;
end else if (~err_busy_w & ~e_awvalid_r & ~(s_axi_awvalid & w_err)) begin
s_awvalid_en <= 1'b1;
s_awready_en <= 1'b1;
end
if (aw_push & ~aw_pop) begin
aw_cnt <= aw_cnt + 1;
end else if (~aw_push & aw_pop & (|aw_cnt)) begin
aw_cnt <= aw_cnt - 1;
end
if (aw_push) begin
if (~w_pop & ~w_borrow) begin
w_cnt <= w_cnt + 1;
end
w_borrow <= 1'b0;
end else if (~aw_push & w_pop) begin
if (|w_cnt) begin
w_cnt <= w_cnt - 1;
end else begin
w_borrow <= 1'b1;
end
end
s_awvalid_pending <= s_awvalid_i & ~s_awready_i;
e_arready <= 1'b0; // One-cycle pulse
if (e_rvalid & s_axi_rready & e_rlast) begin
s_arvalid_en <= 1'b1;
s_arready_en <= 1'b1;
err_busy_r <= 1'b0;
end else if (e_arvalid) begin
e_arvalid_r <= 1'b0;
err_busy_r <= 1'b1;
end else if (s_axi_arvalid & r_err & ~e_arvalid_r & ~err_busy_r) begin
e_arvalid_r <= 1'b1;
e_arready <= ~(s_arready_i & s_arvalid_en); // 1-cycle pulse if arready not already asserted
s_arvalid_en <= 1'b0;
s_arready_en <= 1'b0;
end else if ((&ar_cnt) | ar_push) begin
s_arvalid_en <= 1'b0;
s_arready_en <= 1'b0;
end else if (~err_busy_r & ~e_arvalid_r & ~(s_axi_arvalid & r_err)) begin
s_arvalid_en <= 1'b1;
s_arready_en <= 1'b1;
end
if (ar_push & ~ar_pop) begin
ar_cnt <= ar_cnt + 1;
end else if (~ar_push & ar_pop & (|ar_cnt)) begin
ar_cnt <= ar_cnt - 1;
end
end
end
always @(posedge aclk) begin
if (s_axi_awvalid & ~err_busy_w & ~e_awvalid_r ) begin
e_awid <= s_axi_awid;
end
if (s_axi_arvalid & ~err_busy_r & ~e_arvalid_r ) begin
e_arid <= s_axi_arid;
e_arlen <= s_axi_arlen;
end
end
axi_protocol_converter_v2_1_decerr_slave #
(
.C_AXI_ID_WIDTH (C_AXI_ID_WIDTH),
.C_AXI_DATA_WIDTH (C_AXI_DATA_WIDTH),
.C_AXI_RUSER_WIDTH (C_AXI_RUSER_WIDTH),
.C_AXI_BUSER_WIDTH (C_AXI_BUSER_WIDTH),
.C_AXI_PROTOCOL (C_S_AXI_PROTOCOL),
.C_RESP (P_SLVERR),
.C_IGNORE_ID (C_IGNORE_ID)
)
decerr_slave_inst
(
.ACLK (aclk),
.ARESETN (aresetn),
.S_AXI_AWID (e_awid),
.S_AXI_AWVALID (e_awvalid),
.S_AXI_AWREADY (),
.S_AXI_WLAST (s_axi_wlast),
.S_AXI_WVALID (e_wvalid),
.S_AXI_WREADY (e_wready),
.S_AXI_BID (e_bid),
.S_AXI_BRESP (),
.S_AXI_BUSER (),
.S_AXI_BVALID (e_bvalid),
.S_AXI_BREADY (s_axi_bready),
.S_AXI_ARID (e_arid),
.S_AXI_ARLEN (e_arlen),
.S_AXI_ARVALID (e_arvalid),
.S_AXI_ARREADY (),
.S_AXI_RID (e_rid),
.S_AXI_RDATA (),
.S_AXI_RRESP (),
.S_AXI_RUSER (),
.S_AXI_RLAST (e_rlast),
.S_AXI_RVALID (e_rvalid),
.S_AXI_RREADY (s_axi_rready)
);
end else begin : gen_no_err_detect
assign s_awvalid_i = s_axi_awvalid;
assign s_arvalid_i = s_axi_arvalid;
assign s_wvalid_i = s_axi_wvalid;
assign s_bready_i = s_axi_bready;
assign s_rready_i = s_axi_rready;
assign s_axi_awready = s_awready_i;
assign s_axi_wready = s_wready_i;
assign s_axi_bvalid = s_bvalid_i;
assign s_axi_bid = s_bid_i;
assign s_axi_bresp = s_bresp_i;
assign s_axi_buser = s_buser_i;
assign s_axi_arready = s_arready_i;
assign s_axi_rvalid = s_rvalid_i;
assign s_axi_rid = s_rid_i;
assign s_axi_rresp = s_rresp_i;
assign s_axi_ruser = s_ruser_i;
assign s_axi_rdata = s_rdata_i;
assign s_axi_rlast = s_rlast_i;
end // gen_err_detect
endgenerate
endmodule
`default_nettype wire
|
`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
// Company:
// Engineer:
//
// Create Date: 03/10/2016 04:46:19 PM
// Design Name:
// Module Name: exp_operation
// Project Name:
// Target Devices:
// Tool Versions:
// Description:
//
// Dependencies:
//
// Revision:
// Revision 0.01 - File Created
// Additional Comments:
//
//////////////////////////////////////////////////////////////////////////////////
module Exp_Operation
#(parameter EW = 8) //Exponent Width
(
input wire clk, //system clock
input wire rst, //reset of the module
input wire load_a_i,
input wire load_b_i,
input wire [EW-1:0] Data_A_i,
input wire [EW-1:0] Data_B_i,
input wire Add_Subt_i,
///////////////////////////////////////////////////////////////////77
output wire [EW-1:0] Data_Result_o,
output wire Overflow_flag_o,
output wire Underflow_flag_o
);
//wire [EW-1:0] Data_B;
wire [EW:0] Data_S;
/////////////////////////////////////////7
//genvar j;
//for (j=0; j<EW; j=j+1)begin
// assign Data_B[j] = PreData_B_i[j] ^ Add_Subt_i;
//end
/////////////////////////////////////////
add_sub_carry_out #(.W(EW)) exp_add_subt(
.op_mode (Add_Subt_i),
.Data_A (Data_A_i),
.Data_B (Data_B_i),
.Data_S (Data_S)
);
//assign Overflow_flag_o = 1'b0;
//assign Underflow_flag_o = 1'b0;
Comparators #(.W_Exp(EW+1)) array_comparators(
.exp(Data_S),
.overflow(Overflow_flag),
.underflow(Underflow_flag)
);
RegisterAdd #(.W(EW)) exp_result(
.clk (clk),
.rst (rst),
.load (load_a_i),
.D (Data_S[EW-1:0]),
.Q (Data_Result_o)
);
RegisterAdd #(.W(1)) Overflow (
.clk(clk),
.rst(rst),
.load(load_a_i),
.D(Overflow_flag),
.Q(Overflow_flag_o)
);
RegisterAdd #(.W(1)) Underflow (
.clk(clk),
.rst(rst),
.load(load_b_i),
.D(Underflow_flag),
.Q(Underflow_flag_o)
);
endmodule
|
`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
// Company:
// Engineer:
//
// Create Date: 03/10/2016 04:46:19 PM
// Design Name:
// Module Name: exp_operation
// Project Name:
// Target Devices:
// Tool Versions:
// Description:
//
// Dependencies:
//
// Revision:
// Revision 0.01 - File Created
// Additional Comments:
//
//////////////////////////////////////////////////////////////////////////////////
module Exp_Operation
#(parameter EW = 8) //Exponent Width
(
input wire clk, //system clock
input wire rst, //reset of the module
input wire load_a_i,
input wire load_b_i,
input wire [EW-1:0] Data_A_i,
input wire [EW-1:0] Data_B_i,
input wire Add_Subt_i,
///////////////////////////////////////////////////////////////////77
output wire [EW-1:0] Data_Result_o,
output wire Overflow_flag_o,
output wire Underflow_flag_o
);
//wire [EW-1:0] Data_B;
wire [EW:0] Data_S;
/////////////////////////////////////////7
//genvar j;
//for (j=0; j<EW; j=j+1)begin
// assign Data_B[j] = PreData_B_i[j] ^ Add_Subt_i;
//end
/////////////////////////////////////////
add_sub_carry_out #(.W(EW)) exp_add_subt(
.op_mode (Add_Subt_i),
.Data_A (Data_A_i),
.Data_B (Data_B_i),
.Data_S (Data_S)
);
//assign Overflow_flag_o = 1'b0;
//assign Underflow_flag_o = 1'b0;
Comparators #(.W_Exp(EW+1)) array_comparators(
.exp(Data_S),
.overflow(Overflow_flag),
.underflow(Underflow_flag)
);
RegisterAdd #(.W(EW)) exp_result(
.clk (clk),
.rst (rst),
.load (load_a_i),
.D (Data_S[EW-1:0]),
.Q (Data_Result_o)
);
RegisterAdd #(.W(1)) Overflow (
.clk(clk),
.rst(rst),
.load(load_a_i),
.D(Overflow_flag),
.Q(Overflow_flag_o)
);
RegisterAdd #(.W(1)) Underflow (
.clk(clk),
.rst(rst),
.load(load_b_i),
.D(Underflow_flag),
.Q(Underflow_flag_o)
);
endmodule
|
`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
// Company:
// Engineer:
//
// Create Date: 03/10/2016 04:46:19 PM
// Design Name:
// Module Name: exp_operation
// Project Name:
// Target Devices:
// Tool Versions:
// Description:
//
// Dependencies:
//
// Revision:
// Revision 0.01 - File Created
// Additional Comments:
//
//////////////////////////////////////////////////////////////////////////////////
module Exp_Operation
#(parameter EW = 8) //Exponent Width
(
input wire clk, //system clock
input wire rst, //reset of the module
input wire load_a_i,
input wire load_b_i,
input wire [EW-1:0] Data_A_i,
input wire [EW-1:0] Data_B_i,
input wire Add_Subt_i,
///////////////////////////////////////////////////////////////////77
output wire [EW-1:0] Data_Result_o,
output wire Overflow_flag_o,
output wire Underflow_flag_o
);
//wire [EW-1:0] Data_B;
wire [EW:0] Data_S;
/////////////////////////////////////////7
//genvar j;
//for (j=0; j<EW; j=j+1)begin
// assign Data_B[j] = PreData_B_i[j] ^ Add_Subt_i;
//end
/////////////////////////////////////////
add_sub_carry_out #(.W(EW)) exp_add_subt(
.op_mode (Add_Subt_i),
.Data_A (Data_A_i),
.Data_B (Data_B_i),
.Data_S (Data_S)
);
//assign Overflow_flag_o = 1'b0;
//assign Underflow_flag_o = 1'b0;
Comparators #(.W_Exp(EW+1)) array_comparators(
.exp(Data_S),
.overflow(Overflow_flag),
.underflow(Underflow_flag)
);
RegisterAdd #(.W(EW)) exp_result(
.clk (clk),
.rst (rst),
.load (load_a_i),
.D (Data_S[EW-1:0]),
.Q (Data_Result_o)
);
RegisterAdd #(.W(1)) Overflow (
.clk(clk),
.rst(rst),
.load(load_a_i),
.D(Overflow_flag),
.Q(Overflow_flag_o)
);
RegisterAdd #(.W(1)) Underflow (
.clk(clk),
.rst(rst),
.load(load_b_i),
.D(Underflow_flag),
.Q(Underflow_flag_o)
);
endmodule
|
`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
// Company:
// Engineer:
//
// Create Date: 03/10/2016 04:46:19 PM
// Design Name:
// Module Name: exp_operation
// Project Name:
// Target Devices:
// Tool Versions:
// Description:
//
// Dependencies:
//
// Revision:
// Revision 0.01 - File Created
// Additional Comments:
//
//////////////////////////////////////////////////////////////////////////////////
module Exp_Operation
#(parameter EW = 8) //Exponent Width
(
input wire clk, //system clock
input wire rst, //reset of the module
input wire load_a_i,
input wire load_b_i,
input wire [EW-1:0] Data_A_i,
input wire [EW-1:0] Data_B_i,
input wire Add_Subt_i,
///////////////////////////////////////////////////////////////////77
output wire [EW-1:0] Data_Result_o,
output wire Overflow_flag_o,
output wire Underflow_flag_o
);
//wire [EW-1:0] Data_B;
wire [EW:0] Data_S;
/////////////////////////////////////////7
//genvar j;
//for (j=0; j<EW; j=j+1)begin
// assign Data_B[j] = PreData_B_i[j] ^ Add_Subt_i;
//end
/////////////////////////////////////////
add_sub_carry_out #(.W(EW)) exp_add_subt(
.op_mode (Add_Subt_i),
.Data_A (Data_A_i),
.Data_B (Data_B_i),
.Data_S (Data_S)
);
//assign Overflow_flag_o = 1'b0;
//assign Underflow_flag_o = 1'b0;
Comparators #(.W_Exp(EW+1)) array_comparators(
.exp(Data_S),
.overflow(Overflow_flag),
.underflow(Underflow_flag)
);
RegisterAdd #(.W(EW)) exp_result(
.clk (clk),
.rst (rst),
.load (load_a_i),
.D (Data_S[EW-1:0]),
.Q (Data_Result_o)
);
RegisterAdd #(.W(1)) Overflow (
.clk(clk),
.rst(rst),
.load(load_a_i),
.D(Overflow_flag),
.Q(Overflow_flag_o)
);
RegisterAdd #(.W(1)) Underflow (
.clk(clk),
.rst(rst),
.load(load_b_i),
.D(Underflow_flag),
.Q(Underflow_flag_o)
);
endmodule
|
`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
// Company:
// Engineer:
//
// Create Date: 03/10/2016 04:46:19 PM
// Design Name:
// Module Name: exp_operation
// Project Name:
// Target Devices:
// Tool Versions:
// Description:
//
// Dependencies:
//
// Revision:
// Revision 0.01 - File Created
// Additional Comments:
//
//////////////////////////////////////////////////////////////////////////////////
module Exp_Operation
#(parameter EW = 8) //Exponent Width
(
input wire clk, //system clock
input wire rst, //reset of the module
input wire load_a_i,
input wire load_b_i,
input wire [EW-1:0] Data_A_i,
input wire [EW-1:0] Data_B_i,
input wire Add_Subt_i,
///////////////////////////////////////////////////////////////////77
output wire [EW-1:0] Data_Result_o,
output wire Overflow_flag_o,
output wire Underflow_flag_o
);
//wire [EW-1:0] Data_B;
wire [EW:0] Data_S;
/////////////////////////////////////////7
//genvar j;
//for (j=0; j<EW; j=j+1)begin
// assign Data_B[j] = PreData_B_i[j] ^ Add_Subt_i;
//end
/////////////////////////////////////////
add_sub_carry_out #(.W(EW)) exp_add_subt(
.op_mode (Add_Subt_i),
.Data_A (Data_A_i),
.Data_B (Data_B_i),
.Data_S (Data_S)
);
//assign Overflow_flag_o = 1'b0;
//assign Underflow_flag_o = 1'b0;
Comparators #(.W_Exp(EW+1)) array_comparators(
.exp(Data_S),
.overflow(Overflow_flag),
.underflow(Underflow_flag)
);
RegisterAdd #(.W(EW)) exp_result(
.clk (clk),
.rst (rst),
.load (load_a_i),
.D (Data_S[EW-1:0]),
.Q (Data_Result_o)
);
RegisterAdd #(.W(1)) Overflow (
.clk(clk),
.rst(rst),
.load(load_a_i),
.D(Overflow_flag),
.Q(Overflow_flag_o)
);
RegisterAdd #(.W(1)) Underflow (
.clk(clk),
.rst(rst),
.load(load_b_i),
.D(Underflow_flag),
.Q(Underflow_flag_o)
);
endmodule
|
`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
// Company:
// Engineer:
//
// Create Date: 03/10/2016 04:46:19 PM
// Design Name:
// Module Name: exp_operation
// Project Name:
// Target Devices:
// Tool Versions:
// Description:
//
// Dependencies:
//
// Revision:
// Revision 0.01 - File Created
// Additional Comments:
//
//////////////////////////////////////////////////////////////////////////////////
module Exp_Operation
#(parameter EW = 8) //Exponent Width
(
input wire clk, //system clock
input wire rst, //reset of the module
input wire load_a_i,
input wire load_b_i,
input wire [EW-1:0] Data_A_i,
input wire [EW-1:0] Data_B_i,
input wire Add_Subt_i,
///////////////////////////////////////////////////////////////////77
output wire [EW-1:0] Data_Result_o,
output wire Overflow_flag_o,
output wire Underflow_flag_o
);
//wire [EW-1:0] Data_B;
wire [EW:0] Data_S;
/////////////////////////////////////////7
//genvar j;
//for (j=0; j<EW; j=j+1)begin
// assign Data_B[j] = PreData_B_i[j] ^ Add_Subt_i;
//end
/////////////////////////////////////////
add_sub_carry_out #(.W(EW)) exp_add_subt(
.op_mode (Add_Subt_i),
.Data_A (Data_A_i),
.Data_B (Data_B_i),
.Data_S (Data_S)
);
//assign Overflow_flag_o = 1'b0;
//assign Underflow_flag_o = 1'b0;
Comparators #(.W_Exp(EW+1)) array_comparators(
.exp(Data_S),
.overflow(Overflow_flag),
.underflow(Underflow_flag)
);
RegisterAdd #(.W(EW)) exp_result(
.clk (clk),
.rst (rst),
.load (load_a_i),
.D (Data_S[EW-1:0]),
.Q (Data_Result_o)
);
RegisterAdd #(.W(1)) Overflow (
.clk(clk),
.rst(rst),
.load(load_a_i),
.D(Overflow_flag),
.Q(Overflow_flag_o)
);
RegisterAdd #(.W(1)) Underflow (
.clk(clk),
.rst(rst),
.load(load_b_i),
.D(Underflow_flag),
.Q(Underflow_flag_o)
);
endmodule
|
/*
* VGA top level file
* Copyright (C) 2010 Zeus Gomez Marmolejo <zeus@aluzina.org>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module vga (
// Wishbone signals
input wb_clk_i, // 25 Mhz VDU clock
input wb_rst_i,
input [15:0] wb_dat_i,
output [15:0] wb_dat_o,
input [16:1] wb_adr_i,
input wb_we_i,
input wb_tga_i,
input [ 1:0] wb_sel_i,
input wb_stb_i,
input wb_cyc_i,
output wb_ack_o,
// VGA pad signals
output [ 3:0] vga_red_o,
output [ 3:0] vga_green_o,
output [ 3:0] vga_blue_o,
output horiz_sync,
output vert_sync,
// CSR SRAM master interface
output [17:1] csrm_adr_o,
output [ 1:0] csrm_sel_o,
output csrm_we_o,
output [15:0] csrm_dat_o,
input [15:0] csrm_dat_i
);
// Registers and nets
//
// csr address
reg [17:1] csr_adr_i;
reg csr_stb_i;
// Config wires
wire [15:0] conf_wb_dat_o;
wire conf_wb_ack_o;
// Mem wires
wire [15:0] mem_wb_dat_o;
wire mem_wb_ack_o;
// LCD wires
wire [17:1] csr_adr_o;
wire [15:0] csr_dat_i;
wire csr_stb_o;
wire v_retrace;
wire vh_retrace;
wire w_vert_sync;
// VGA configuration registers
wire shift_reg1;
wire graphics_alpha;
wire memory_mapping1;
wire [ 1:0] write_mode;
wire [ 1:0] raster_op;
wire read_mode;
wire [ 7:0] bitmask;
wire [ 3:0] set_reset;
wire [ 3:0] enable_set_reset;
wire [ 3:0] map_mask;
wire x_dotclockdiv2;
wire chain_four;
wire [ 1:0] read_map_select;
wire [ 3:0] color_compare;
wire [ 3:0] color_dont_care;
// Wishbone master to SRAM
wire [17:1] wbm_adr_o;
wire [ 1:0] wbm_sel_o;
wire wbm_we_o;
wire [15:0] wbm_dat_o;
wire [15:0] wbm_dat_i;
wire wbm_stb_o;
wire wbm_ack_i;
wire stb;
// CRT wires
wire [ 5:0] cur_start;
wire [ 5:0] cur_end;
wire [15:0] start_addr;
wire [ 4:0] vcursor;
wire [ 6:0] hcursor;
wire [ 6:0] horiz_total;
wire [ 6:0] end_horiz;
wire [ 6:0] st_hor_retr;
wire [ 4:0] end_hor_retr;
wire [ 9:0] vert_total;
wire [ 9:0] end_vert;
wire [ 9:0] st_ver_retr;
wire [ 3:0] end_ver_retr;
// attribute_ctrl wires
wire [3:0] pal_addr;
wire pal_we;
wire [7:0] pal_read;
wire [7:0] pal_write;
// dac_regs wires
wire dac_we;
wire [1:0] dac_read_data_cycle;
wire [7:0] dac_read_data_register;
wire [3:0] dac_read_data;
wire [1:0] dac_write_data_cycle;
wire [7:0] dac_write_data_register;
wire [3:0] dac_write_data;
// Module instances
//
vga_config_iface config_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wb_dat_i (wb_dat_i),
.wb_dat_o (conf_wb_dat_o),
.wb_adr_i (wb_adr_i[4:1]),
.wb_we_i (wb_we_i),
.wb_sel_i (wb_sel_i),
.wb_stb_i (stb & wb_tga_i),
.wb_ack_o (conf_wb_ack_o),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.x_dotclockdiv2 (x_dotclockdiv2),
.chain_four (chain_four),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.cur_start (cur_start),
.cur_end (cur_end),
.start_addr (start_addr),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_lcd lcd (
.clk (wb_clk_i),
.rst (wb_rst_i),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.csr_adr_o (csr_adr_o),
.csr_dat_i (csr_dat_i),
.csr_stb_o (csr_stb_o),
.vga_red_o (vga_red_o),
.vga_green_o (vga_green_o),
.vga_blue_o (vga_blue_o),
.horiz_sync (horiz_sync),
.vert_sync (w_vert_sync),
.cur_start (cur_start),
.cur_end (cur_end),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.x_dotclockdiv2 (x_dotclockdiv2),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_cpu_mem_iface cpu_mem_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wbs_adr_i (wb_adr_i),
.wbs_sel_i (wb_sel_i),
.wbs_we_i (wb_we_i),
.wbs_dat_i (wb_dat_i),
.wbs_dat_o (mem_wb_dat_o),
.wbs_stb_i (stb & !wb_tga_i),
.wbs_ack_o (mem_wb_ack_o),
.wbm_adr_o (wbm_adr_o),
.wbm_sel_o (wbm_sel_o),
.wbm_we_o (wbm_we_o),
.wbm_dat_o (wbm_dat_o),
.wbm_dat_i (wbm_dat_i),
.wbm_stb_o (wbm_stb_o),
.wbm_ack_i (wbm_ack_i),
.chain_four (chain_four),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care)
);
vga_mem_arbitrer mem_arbitrer (
.clk_i (wb_clk_i),
.rst_i (wb_rst_i),
.wb_adr_i (wbm_adr_o),
.wb_sel_i (wbm_sel_o),
.wb_we_i (wbm_we_o),
.wb_dat_i (wbm_dat_o),
.wb_dat_o (wbm_dat_i),
.wb_stb_i (wbm_stb_o),
.wb_ack_o (wbm_ack_i),
.csr_adr_i (csr_adr_i),
.csr_dat_o (csr_dat_i),
.csr_stb_i (csr_stb_i),
.csrm_adr_o (csrm_adr_o),
.csrm_sel_o (csrm_sel_o),
.csrm_we_o (csrm_we_o),
.csrm_dat_o (csrm_dat_o),
.csrm_dat_i (csrm_dat_i)
);
// Continous assignments
assign wb_dat_o = wb_tga_i ? conf_wb_dat_o : mem_wb_dat_o;
assign wb_ack_o = wb_tga_i ? conf_wb_ack_o : mem_wb_ack_o;
assign stb = wb_stb_i & wb_cyc_i;
assign vert_sync = ~graphics_alpha ^ w_vert_sync;
// Behaviour
// csr_adr_i
always @(posedge wb_clk_i)
csr_adr_i <= wb_rst_i ? 17'h0 : csr_adr_o + start_addr[15:1];
// csr_stb_i
always @(posedge wb_clk_i)
csr_stb_i <= wb_rst_i ? 1'b0 : csr_stb_o;
endmodule
|
/*
* VGA top level file
* Copyright (C) 2010 Zeus Gomez Marmolejo <zeus@aluzina.org>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module vga (
// Wishbone signals
input wb_clk_i, // 25 Mhz VDU clock
input wb_rst_i,
input [15:0] wb_dat_i,
output [15:0] wb_dat_o,
input [16:1] wb_adr_i,
input wb_we_i,
input wb_tga_i,
input [ 1:0] wb_sel_i,
input wb_stb_i,
input wb_cyc_i,
output wb_ack_o,
// VGA pad signals
output [ 3:0] vga_red_o,
output [ 3:0] vga_green_o,
output [ 3:0] vga_blue_o,
output horiz_sync,
output vert_sync,
// CSR SRAM master interface
output [17:1] csrm_adr_o,
output [ 1:0] csrm_sel_o,
output csrm_we_o,
output [15:0] csrm_dat_o,
input [15:0] csrm_dat_i
);
// Registers and nets
//
// csr address
reg [17:1] csr_adr_i;
reg csr_stb_i;
// Config wires
wire [15:0] conf_wb_dat_o;
wire conf_wb_ack_o;
// Mem wires
wire [15:0] mem_wb_dat_o;
wire mem_wb_ack_o;
// LCD wires
wire [17:1] csr_adr_o;
wire [15:0] csr_dat_i;
wire csr_stb_o;
wire v_retrace;
wire vh_retrace;
wire w_vert_sync;
// VGA configuration registers
wire shift_reg1;
wire graphics_alpha;
wire memory_mapping1;
wire [ 1:0] write_mode;
wire [ 1:0] raster_op;
wire read_mode;
wire [ 7:0] bitmask;
wire [ 3:0] set_reset;
wire [ 3:0] enable_set_reset;
wire [ 3:0] map_mask;
wire x_dotclockdiv2;
wire chain_four;
wire [ 1:0] read_map_select;
wire [ 3:0] color_compare;
wire [ 3:0] color_dont_care;
// Wishbone master to SRAM
wire [17:1] wbm_adr_o;
wire [ 1:0] wbm_sel_o;
wire wbm_we_o;
wire [15:0] wbm_dat_o;
wire [15:0] wbm_dat_i;
wire wbm_stb_o;
wire wbm_ack_i;
wire stb;
// CRT wires
wire [ 5:0] cur_start;
wire [ 5:0] cur_end;
wire [15:0] start_addr;
wire [ 4:0] vcursor;
wire [ 6:0] hcursor;
wire [ 6:0] horiz_total;
wire [ 6:0] end_horiz;
wire [ 6:0] st_hor_retr;
wire [ 4:0] end_hor_retr;
wire [ 9:0] vert_total;
wire [ 9:0] end_vert;
wire [ 9:0] st_ver_retr;
wire [ 3:0] end_ver_retr;
// attribute_ctrl wires
wire [3:0] pal_addr;
wire pal_we;
wire [7:0] pal_read;
wire [7:0] pal_write;
// dac_regs wires
wire dac_we;
wire [1:0] dac_read_data_cycle;
wire [7:0] dac_read_data_register;
wire [3:0] dac_read_data;
wire [1:0] dac_write_data_cycle;
wire [7:0] dac_write_data_register;
wire [3:0] dac_write_data;
// Module instances
//
vga_config_iface config_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wb_dat_i (wb_dat_i),
.wb_dat_o (conf_wb_dat_o),
.wb_adr_i (wb_adr_i[4:1]),
.wb_we_i (wb_we_i),
.wb_sel_i (wb_sel_i),
.wb_stb_i (stb & wb_tga_i),
.wb_ack_o (conf_wb_ack_o),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.x_dotclockdiv2 (x_dotclockdiv2),
.chain_four (chain_four),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.cur_start (cur_start),
.cur_end (cur_end),
.start_addr (start_addr),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_lcd lcd (
.clk (wb_clk_i),
.rst (wb_rst_i),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.csr_adr_o (csr_adr_o),
.csr_dat_i (csr_dat_i),
.csr_stb_o (csr_stb_o),
.vga_red_o (vga_red_o),
.vga_green_o (vga_green_o),
.vga_blue_o (vga_blue_o),
.horiz_sync (horiz_sync),
.vert_sync (w_vert_sync),
.cur_start (cur_start),
.cur_end (cur_end),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.x_dotclockdiv2 (x_dotclockdiv2),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_cpu_mem_iface cpu_mem_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wbs_adr_i (wb_adr_i),
.wbs_sel_i (wb_sel_i),
.wbs_we_i (wb_we_i),
.wbs_dat_i (wb_dat_i),
.wbs_dat_o (mem_wb_dat_o),
.wbs_stb_i (stb & !wb_tga_i),
.wbs_ack_o (mem_wb_ack_o),
.wbm_adr_o (wbm_adr_o),
.wbm_sel_o (wbm_sel_o),
.wbm_we_o (wbm_we_o),
.wbm_dat_o (wbm_dat_o),
.wbm_dat_i (wbm_dat_i),
.wbm_stb_o (wbm_stb_o),
.wbm_ack_i (wbm_ack_i),
.chain_four (chain_four),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care)
);
vga_mem_arbitrer mem_arbitrer (
.clk_i (wb_clk_i),
.rst_i (wb_rst_i),
.wb_adr_i (wbm_adr_o),
.wb_sel_i (wbm_sel_o),
.wb_we_i (wbm_we_o),
.wb_dat_i (wbm_dat_o),
.wb_dat_o (wbm_dat_i),
.wb_stb_i (wbm_stb_o),
.wb_ack_o (wbm_ack_i),
.csr_adr_i (csr_adr_i),
.csr_dat_o (csr_dat_i),
.csr_stb_i (csr_stb_i),
.csrm_adr_o (csrm_adr_o),
.csrm_sel_o (csrm_sel_o),
.csrm_we_o (csrm_we_o),
.csrm_dat_o (csrm_dat_o),
.csrm_dat_i (csrm_dat_i)
);
// Continous assignments
assign wb_dat_o = wb_tga_i ? conf_wb_dat_o : mem_wb_dat_o;
assign wb_ack_o = wb_tga_i ? conf_wb_ack_o : mem_wb_ack_o;
assign stb = wb_stb_i & wb_cyc_i;
assign vert_sync = ~graphics_alpha ^ w_vert_sync;
// Behaviour
// csr_adr_i
always @(posedge wb_clk_i)
csr_adr_i <= wb_rst_i ? 17'h0 : csr_adr_o + start_addr[15:1];
// csr_stb_i
always @(posedge wb_clk_i)
csr_stb_i <= wb_rst_i ? 1'b0 : csr_stb_o;
endmodule
|
/*
* VGA top level file
* Copyright (C) 2010 Zeus Gomez Marmolejo <zeus@aluzina.org>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module vga (
// Wishbone signals
input wb_clk_i, // 25 Mhz VDU clock
input wb_rst_i,
input [15:0] wb_dat_i,
output [15:0] wb_dat_o,
input [16:1] wb_adr_i,
input wb_we_i,
input wb_tga_i,
input [ 1:0] wb_sel_i,
input wb_stb_i,
input wb_cyc_i,
output wb_ack_o,
// VGA pad signals
output [ 3:0] vga_red_o,
output [ 3:0] vga_green_o,
output [ 3:0] vga_blue_o,
output horiz_sync,
output vert_sync,
// CSR SRAM master interface
output [17:1] csrm_adr_o,
output [ 1:0] csrm_sel_o,
output csrm_we_o,
output [15:0] csrm_dat_o,
input [15:0] csrm_dat_i
);
// Registers and nets
//
// csr address
reg [17:1] csr_adr_i;
reg csr_stb_i;
// Config wires
wire [15:0] conf_wb_dat_o;
wire conf_wb_ack_o;
// Mem wires
wire [15:0] mem_wb_dat_o;
wire mem_wb_ack_o;
// LCD wires
wire [17:1] csr_adr_o;
wire [15:0] csr_dat_i;
wire csr_stb_o;
wire v_retrace;
wire vh_retrace;
wire w_vert_sync;
// VGA configuration registers
wire shift_reg1;
wire graphics_alpha;
wire memory_mapping1;
wire [ 1:0] write_mode;
wire [ 1:0] raster_op;
wire read_mode;
wire [ 7:0] bitmask;
wire [ 3:0] set_reset;
wire [ 3:0] enable_set_reset;
wire [ 3:0] map_mask;
wire x_dotclockdiv2;
wire chain_four;
wire [ 1:0] read_map_select;
wire [ 3:0] color_compare;
wire [ 3:0] color_dont_care;
// Wishbone master to SRAM
wire [17:1] wbm_adr_o;
wire [ 1:0] wbm_sel_o;
wire wbm_we_o;
wire [15:0] wbm_dat_o;
wire [15:0] wbm_dat_i;
wire wbm_stb_o;
wire wbm_ack_i;
wire stb;
// CRT wires
wire [ 5:0] cur_start;
wire [ 5:0] cur_end;
wire [15:0] start_addr;
wire [ 4:0] vcursor;
wire [ 6:0] hcursor;
wire [ 6:0] horiz_total;
wire [ 6:0] end_horiz;
wire [ 6:0] st_hor_retr;
wire [ 4:0] end_hor_retr;
wire [ 9:0] vert_total;
wire [ 9:0] end_vert;
wire [ 9:0] st_ver_retr;
wire [ 3:0] end_ver_retr;
// attribute_ctrl wires
wire [3:0] pal_addr;
wire pal_we;
wire [7:0] pal_read;
wire [7:0] pal_write;
// dac_regs wires
wire dac_we;
wire [1:0] dac_read_data_cycle;
wire [7:0] dac_read_data_register;
wire [3:0] dac_read_data;
wire [1:0] dac_write_data_cycle;
wire [7:0] dac_write_data_register;
wire [3:0] dac_write_data;
// Module instances
//
vga_config_iface config_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wb_dat_i (wb_dat_i),
.wb_dat_o (conf_wb_dat_o),
.wb_adr_i (wb_adr_i[4:1]),
.wb_we_i (wb_we_i),
.wb_sel_i (wb_sel_i),
.wb_stb_i (stb & wb_tga_i),
.wb_ack_o (conf_wb_ack_o),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.x_dotclockdiv2 (x_dotclockdiv2),
.chain_four (chain_four),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.cur_start (cur_start),
.cur_end (cur_end),
.start_addr (start_addr),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_lcd lcd (
.clk (wb_clk_i),
.rst (wb_rst_i),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.csr_adr_o (csr_adr_o),
.csr_dat_i (csr_dat_i),
.csr_stb_o (csr_stb_o),
.vga_red_o (vga_red_o),
.vga_green_o (vga_green_o),
.vga_blue_o (vga_blue_o),
.horiz_sync (horiz_sync),
.vert_sync (w_vert_sync),
.cur_start (cur_start),
.cur_end (cur_end),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.x_dotclockdiv2 (x_dotclockdiv2),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_cpu_mem_iface cpu_mem_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wbs_adr_i (wb_adr_i),
.wbs_sel_i (wb_sel_i),
.wbs_we_i (wb_we_i),
.wbs_dat_i (wb_dat_i),
.wbs_dat_o (mem_wb_dat_o),
.wbs_stb_i (stb & !wb_tga_i),
.wbs_ack_o (mem_wb_ack_o),
.wbm_adr_o (wbm_adr_o),
.wbm_sel_o (wbm_sel_o),
.wbm_we_o (wbm_we_o),
.wbm_dat_o (wbm_dat_o),
.wbm_dat_i (wbm_dat_i),
.wbm_stb_o (wbm_stb_o),
.wbm_ack_i (wbm_ack_i),
.chain_four (chain_four),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care)
);
vga_mem_arbitrer mem_arbitrer (
.clk_i (wb_clk_i),
.rst_i (wb_rst_i),
.wb_adr_i (wbm_adr_o),
.wb_sel_i (wbm_sel_o),
.wb_we_i (wbm_we_o),
.wb_dat_i (wbm_dat_o),
.wb_dat_o (wbm_dat_i),
.wb_stb_i (wbm_stb_o),
.wb_ack_o (wbm_ack_i),
.csr_adr_i (csr_adr_i),
.csr_dat_o (csr_dat_i),
.csr_stb_i (csr_stb_i),
.csrm_adr_o (csrm_adr_o),
.csrm_sel_o (csrm_sel_o),
.csrm_we_o (csrm_we_o),
.csrm_dat_o (csrm_dat_o),
.csrm_dat_i (csrm_dat_i)
);
// Continous assignments
assign wb_dat_o = wb_tga_i ? conf_wb_dat_o : mem_wb_dat_o;
assign wb_ack_o = wb_tga_i ? conf_wb_ack_o : mem_wb_ack_o;
assign stb = wb_stb_i & wb_cyc_i;
assign vert_sync = ~graphics_alpha ^ w_vert_sync;
// Behaviour
// csr_adr_i
always @(posedge wb_clk_i)
csr_adr_i <= wb_rst_i ? 17'h0 : csr_adr_o + start_addr[15:1];
// csr_stb_i
always @(posedge wb_clk_i)
csr_stb_i <= wb_rst_i ? 1'b0 : csr_stb_o;
endmodule
|
/*
* VGA top level file
* Copyright (C) 2010 Zeus Gomez Marmolejo <zeus@aluzina.org>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module vga (
// Wishbone signals
input wb_clk_i, // 25 Mhz VDU clock
input wb_rst_i,
input [15:0] wb_dat_i,
output [15:0] wb_dat_o,
input [16:1] wb_adr_i,
input wb_we_i,
input wb_tga_i,
input [ 1:0] wb_sel_i,
input wb_stb_i,
input wb_cyc_i,
output wb_ack_o,
// VGA pad signals
output [ 3:0] vga_red_o,
output [ 3:0] vga_green_o,
output [ 3:0] vga_blue_o,
output horiz_sync,
output vert_sync,
// CSR SRAM master interface
output [17:1] csrm_adr_o,
output [ 1:0] csrm_sel_o,
output csrm_we_o,
output [15:0] csrm_dat_o,
input [15:0] csrm_dat_i
);
// Registers and nets
//
// csr address
reg [17:1] csr_adr_i;
reg csr_stb_i;
// Config wires
wire [15:0] conf_wb_dat_o;
wire conf_wb_ack_o;
// Mem wires
wire [15:0] mem_wb_dat_o;
wire mem_wb_ack_o;
// LCD wires
wire [17:1] csr_adr_o;
wire [15:0] csr_dat_i;
wire csr_stb_o;
wire v_retrace;
wire vh_retrace;
wire w_vert_sync;
// VGA configuration registers
wire shift_reg1;
wire graphics_alpha;
wire memory_mapping1;
wire [ 1:0] write_mode;
wire [ 1:0] raster_op;
wire read_mode;
wire [ 7:0] bitmask;
wire [ 3:0] set_reset;
wire [ 3:0] enable_set_reset;
wire [ 3:0] map_mask;
wire x_dotclockdiv2;
wire chain_four;
wire [ 1:0] read_map_select;
wire [ 3:0] color_compare;
wire [ 3:0] color_dont_care;
// Wishbone master to SRAM
wire [17:1] wbm_adr_o;
wire [ 1:0] wbm_sel_o;
wire wbm_we_o;
wire [15:0] wbm_dat_o;
wire [15:0] wbm_dat_i;
wire wbm_stb_o;
wire wbm_ack_i;
wire stb;
// CRT wires
wire [ 5:0] cur_start;
wire [ 5:0] cur_end;
wire [15:0] start_addr;
wire [ 4:0] vcursor;
wire [ 6:0] hcursor;
wire [ 6:0] horiz_total;
wire [ 6:0] end_horiz;
wire [ 6:0] st_hor_retr;
wire [ 4:0] end_hor_retr;
wire [ 9:0] vert_total;
wire [ 9:0] end_vert;
wire [ 9:0] st_ver_retr;
wire [ 3:0] end_ver_retr;
// attribute_ctrl wires
wire [3:0] pal_addr;
wire pal_we;
wire [7:0] pal_read;
wire [7:0] pal_write;
// dac_regs wires
wire dac_we;
wire [1:0] dac_read_data_cycle;
wire [7:0] dac_read_data_register;
wire [3:0] dac_read_data;
wire [1:0] dac_write_data_cycle;
wire [7:0] dac_write_data_register;
wire [3:0] dac_write_data;
// Module instances
//
vga_config_iface config_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wb_dat_i (wb_dat_i),
.wb_dat_o (conf_wb_dat_o),
.wb_adr_i (wb_adr_i[4:1]),
.wb_we_i (wb_we_i),
.wb_sel_i (wb_sel_i),
.wb_stb_i (stb & wb_tga_i),
.wb_ack_o (conf_wb_ack_o),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.x_dotclockdiv2 (x_dotclockdiv2),
.chain_four (chain_four),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.cur_start (cur_start),
.cur_end (cur_end),
.start_addr (start_addr),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_lcd lcd (
.clk (wb_clk_i),
.rst (wb_rst_i),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.csr_adr_o (csr_adr_o),
.csr_dat_i (csr_dat_i),
.csr_stb_o (csr_stb_o),
.vga_red_o (vga_red_o),
.vga_green_o (vga_green_o),
.vga_blue_o (vga_blue_o),
.horiz_sync (horiz_sync),
.vert_sync (w_vert_sync),
.cur_start (cur_start),
.cur_end (cur_end),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.x_dotclockdiv2 (x_dotclockdiv2),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_cpu_mem_iface cpu_mem_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wbs_adr_i (wb_adr_i),
.wbs_sel_i (wb_sel_i),
.wbs_we_i (wb_we_i),
.wbs_dat_i (wb_dat_i),
.wbs_dat_o (mem_wb_dat_o),
.wbs_stb_i (stb & !wb_tga_i),
.wbs_ack_o (mem_wb_ack_o),
.wbm_adr_o (wbm_adr_o),
.wbm_sel_o (wbm_sel_o),
.wbm_we_o (wbm_we_o),
.wbm_dat_o (wbm_dat_o),
.wbm_dat_i (wbm_dat_i),
.wbm_stb_o (wbm_stb_o),
.wbm_ack_i (wbm_ack_i),
.chain_four (chain_four),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care)
);
vga_mem_arbitrer mem_arbitrer (
.clk_i (wb_clk_i),
.rst_i (wb_rst_i),
.wb_adr_i (wbm_adr_o),
.wb_sel_i (wbm_sel_o),
.wb_we_i (wbm_we_o),
.wb_dat_i (wbm_dat_o),
.wb_dat_o (wbm_dat_i),
.wb_stb_i (wbm_stb_o),
.wb_ack_o (wbm_ack_i),
.csr_adr_i (csr_adr_i),
.csr_dat_o (csr_dat_i),
.csr_stb_i (csr_stb_i),
.csrm_adr_o (csrm_adr_o),
.csrm_sel_o (csrm_sel_o),
.csrm_we_o (csrm_we_o),
.csrm_dat_o (csrm_dat_o),
.csrm_dat_i (csrm_dat_i)
);
// Continous assignments
assign wb_dat_o = wb_tga_i ? conf_wb_dat_o : mem_wb_dat_o;
assign wb_ack_o = wb_tga_i ? conf_wb_ack_o : mem_wb_ack_o;
assign stb = wb_stb_i & wb_cyc_i;
assign vert_sync = ~graphics_alpha ^ w_vert_sync;
// Behaviour
// csr_adr_i
always @(posedge wb_clk_i)
csr_adr_i <= wb_rst_i ? 17'h0 : csr_adr_o + start_addr[15:1];
// csr_stb_i
always @(posedge wb_clk_i)
csr_stb_i <= wb_rst_i ? 1'b0 : csr_stb_o;
endmodule
|
/*
* VGA top level file
* Copyright (C) 2010 Zeus Gomez Marmolejo <zeus@aluzina.org>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module vga (
// Wishbone signals
input wb_clk_i, // 25 Mhz VDU clock
input wb_rst_i,
input [15:0] wb_dat_i,
output [15:0] wb_dat_o,
input [16:1] wb_adr_i,
input wb_we_i,
input wb_tga_i,
input [ 1:0] wb_sel_i,
input wb_stb_i,
input wb_cyc_i,
output wb_ack_o,
// VGA pad signals
output [ 3:0] vga_red_o,
output [ 3:0] vga_green_o,
output [ 3:0] vga_blue_o,
output horiz_sync,
output vert_sync,
// CSR SRAM master interface
output [17:1] csrm_adr_o,
output [ 1:0] csrm_sel_o,
output csrm_we_o,
output [15:0] csrm_dat_o,
input [15:0] csrm_dat_i
);
// Registers and nets
//
// csr address
reg [17:1] csr_adr_i;
reg csr_stb_i;
// Config wires
wire [15:0] conf_wb_dat_o;
wire conf_wb_ack_o;
// Mem wires
wire [15:0] mem_wb_dat_o;
wire mem_wb_ack_o;
// LCD wires
wire [17:1] csr_adr_o;
wire [15:0] csr_dat_i;
wire csr_stb_o;
wire v_retrace;
wire vh_retrace;
wire w_vert_sync;
// VGA configuration registers
wire shift_reg1;
wire graphics_alpha;
wire memory_mapping1;
wire [ 1:0] write_mode;
wire [ 1:0] raster_op;
wire read_mode;
wire [ 7:0] bitmask;
wire [ 3:0] set_reset;
wire [ 3:0] enable_set_reset;
wire [ 3:0] map_mask;
wire x_dotclockdiv2;
wire chain_four;
wire [ 1:0] read_map_select;
wire [ 3:0] color_compare;
wire [ 3:0] color_dont_care;
// Wishbone master to SRAM
wire [17:1] wbm_adr_o;
wire [ 1:0] wbm_sel_o;
wire wbm_we_o;
wire [15:0] wbm_dat_o;
wire [15:0] wbm_dat_i;
wire wbm_stb_o;
wire wbm_ack_i;
wire stb;
// CRT wires
wire [ 5:0] cur_start;
wire [ 5:0] cur_end;
wire [15:0] start_addr;
wire [ 4:0] vcursor;
wire [ 6:0] hcursor;
wire [ 6:0] horiz_total;
wire [ 6:0] end_horiz;
wire [ 6:0] st_hor_retr;
wire [ 4:0] end_hor_retr;
wire [ 9:0] vert_total;
wire [ 9:0] end_vert;
wire [ 9:0] st_ver_retr;
wire [ 3:0] end_ver_retr;
// attribute_ctrl wires
wire [3:0] pal_addr;
wire pal_we;
wire [7:0] pal_read;
wire [7:0] pal_write;
// dac_regs wires
wire dac_we;
wire [1:0] dac_read_data_cycle;
wire [7:0] dac_read_data_register;
wire [3:0] dac_read_data;
wire [1:0] dac_write_data_cycle;
wire [7:0] dac_write_data_register;
wire [3:0] dac_write_data;
// Module instances
//
vga_config_iface config_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wb_dat_i (wb_dat_i),
.wb_dat_o (conf_wb_dat_o),
.wb_adr_i (wb_adr_i[4:1]),
.wb_we_i (wb_we_i),
.wb_sel_i (wb_sel_i),
.wb_stb_i (stb & wb_tga_i),
.wb_ack_o (conf_wb_ack_o),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.x_dotclockdiv2 (x_dotclockdiv2),
.chain_four (chain_four),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.cur_start (cur_start),
.cur_end (cur_end),
.start_addr (start_addr),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_lcd lcd (
.clk (wb_clk_i),
.rst (wb_rst_i),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.csr_adr_o (csr_adr_o),
.csr_dat_i (csr_dat_i),
.csr_stb_o (csr_stb_o),
.vga_red_o (vga_red_o),
.vga_green_o (vga_green_o),
.vga_blue_o (vga_blue_o),
.horiz_sync (horiz_sync),
.vert_sync (w_vert_sync),
.cur_start (cur_start),
.cur_end (cur_end),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.x_dotclockdiv2 (x_dotclockdiv2),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_cpu_mem_iface cpu_mem_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wbs_adr_i (wb_adr_i),
.wbs_sel_i (wb_sel_i),
.wbs_we_i (wb_we_i),
.wbs_dat_i (wb_dat_i),
.wbs_dat_o (mem_wb_dat_o),
.wbs_stb_i (stb & !wb_tga_i),
.wbs_ack_o (mem_wb_ack_o),
.wbm_adr_o (wbm_adr_o),
.wbm_sel_o (wbm_sel_o),
.wbm_we_o (wbm_we_o),
.wbm_dat_o (wbm_dat_o),
.wbm_dat_i (wbm_dat_i),
.wbm_stb_o (wbm_stb_o),
.wbm_ack_i (wbm_ack_i),
.chain_four (chain_four),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care)
);
vga_mem_arbitrer mem_arbitrer (
.clk_i (wb_clk_i),
.rst_i (wb_rst_i),
.wb_adr_i (wbm_adr_o),
.wb_sel_i (wbm_sel_o),
.wb_we_i (wbm_we_o),
.wb_dat_i (wbm_dat_o),
.wb_dat_o (wbm_dat_i),
.wb_stb_i (wbm_stb_o),
.wb_ack_o (wbm_ack_i),
.csr_adr_i (csr_adr_i),
.csr_dat_o (csr_dat_i),
.csr_stb_i (csr_stb_i),
.csrm_adr_o (csrm_adr_o),
.csrm_sel_o (csrm_sel_o),
.csrm_we_o (csrm_we_o),
.csrm_dat_o (csrm_dat_o),
.csrm_dat_i (csrm_dat_i)
);
// Continous assignments
assign wb_dat_o = wb_tga_i ? conf_wb_dat_o : mem_wb_dat_o;
assign wb_ack_o = wb_tga_i ? conf_wb_ack_o : mem_wb_ack_o;
assign stb = wb_stb_i & wb_cyc_i;
assign vert_sync = ~graphics_alpha ^ w_vert_sync;
// Behaviour
// csr_adr_i
always @(posedge wb_clk_i)
csr_adr_i <= wb_rst_i ? 17'h0 : csr_adr_o + start_addr[15:1];
// csr_stb_i
always @(posedge wb_clk_i)
csr_stb_i <= wb_rst_i ? 1'b0 : csr_stb_o;
endmodule
|
/*
* VGA top level file
* Copyright (C) 2010 Zeus Gomez Marmolejo <zeus@aluzina.org>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module vga (
// Wishbone signals
input wb_clk_i, // 25 Mhz VDU clock
input wb_rst_i,
input [15:0] wb_dat_i,
output [15:0] wb_dat_o,
input [16:1] wb_adr_i,
input wb_we_i,
input wb_tga_i,
input [ 1:0] wb_sel_i,
input wb_stb_i,
input wb_cyc_i,
output wb_ack_o,
// VGA pad signals
output [ 3:0] vga_red_o,
output [ 3:0] vga_green_o,
output [ 3:0] vga_blue_o,
output horiz_sync,
output vert_sync,
// CSR SRAM master interface
output [17:1] csrm_adr_o,
output [ 1:0] csrm_sel_o,
output csrm_we_o,
output [15:0] csrm_dat_o,
input [15:0] csrm_dat_i
);
// Registers and nets
//
// csr address
reg [17:1] csr_adr_i;
reg csr_stb_i;
// Config wires
wire [15:0] conf_wb_dat_o;
wire conf_wb_ack_o;
// Mem wires
wire [15:0] mem_wb_dat_o;
wire mem_wb_ack_o;
// LCD wires
wire [17:1] csr_adr_o;
wire [15:0] csr_dat_i;
wire csr_stb_o;
wire v_retrace;
wire vh_retrace;
wire w_vert_sync;
// VGA configuration registers
wire shift_reg1;
wire graphics_alpha;
wire memory_mapping1;
wire [ 1:0] write_mode;
wire [ 1:0] raster_op;
wire read_mode;
wire [ 7:0] bitmask;
wire [ 3:0] set_reset;
wire [ 3:0] enable_set_reset;
wire [ 3:0] map_mask;
wire x_dotclockdiv2;
wire chain_four;
wire [ 1:0] read_map_select;
wire [ 3:0] color_compare;
wire [ 3:0] color_dont_care;
// Wishbone master to SRAM
wire [17:1] wbm_adr_o;
wire [ 1:0] wbm_sel_o;
wire wbm_we_o;
wire [15:0] wbm_dat_o;
wire [15:0] wbm_dat_i;
wire wbm_stb_o;
wire wbm_ack_i;
wire stb;
// CRT wires
wire [ 5:0] cur_start;
wire [ 5:0] cur_end;
wire [15:0] start_addr;
wire [ 4:0] vcursor;
wire [ 6:0] hcursor;
wire [ 6:0] horiz_total;
wire [ 6:0] end_horiz;
wire [ 6:0] st_hor_retr;
wire [ 4:0] end_hor_retr;
wire [ 9:0] vert_total;
wire [ 9:0] end_vert;
wire [ 9:0] st_ver_retr;
wire [ 3:0] end_ver_retr;
// attribute_ctrl wires
wire [3:0] pal_addr;
wire pal_we;
wire [7:0] pal_read;
wire [7:0] pal_write;
// dac_regs wires
wire dac_we;
wire [1:0] dac_read_data_cycle;
wire [7:0] dac_read_data_register;
wire [3:0] dac_read_data;
wire [1:0] dac_write_data_cycle;
wire [7:0] dac_write_data_register;
wire [3:0] dac_write_data;
// Module instances
//
vga_config_iface config_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wb_dat_i (wb_dat_i),
.wb_dat_o (conf_wb_dat_o),
.wb_adr_i (wb_adr_i[4:1]),
.wb_we_i (wb_we_i),
.wb_sel_i (wb_sel_i),
.wb_stb_i (stb & wb_tga_i),
.wb_ack_o (conf_wb_ack_o),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.x_dotclockdiv2 (x_dotclockdiv2),
.chain_four (chain_four),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.cur_start (cur_start),
.cur_end (cur_end),
.start_addr (start_addr),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_lcd lcd (
.clk (wb_clk_i),
.rst (wb_rst_i),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.csr_adr_o (csr_adr_o),
.csr_dat_i (csr_dat_i),
.csr_stb_o (csr_stb_o),
.vga_red_o (vga_red_o),
.vga_green_o (vga_green_o),
.vga_blue_o (vga_blue_o),
.horiz_sync (horiz_sync),
.vert_sync (w_vert_sync),
.cur_start (cur_start),
.cur_end (cur_end),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.x_dotclockdiv2 (x_dotclockdiv2),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_cpu_mem_iface cpu_mem_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wbs_adr_i (wb_adr_i),
.wbs_sel_i (wb_sel_i),
.wbs_we_i (wb_we_i),
.wbs_dat_i (wb_dat_i),
.wbs_dat_o (mem_wb_dat_o),
.wbs_stb_i (stb & !wb_tga_i),
.wbs_ack_o (mem_wb_ack_o),
.wbm_adr_o (wbm_adr_o),
.wbm_sel_o (wbm_sel_o),
.wbm_we_o (wbm_we_o),
.wbm_dat_o (wbm_dat_o),
.wbm_dat_i (wbm_dat_i),
.wbm_stb_o (wbm_stb_o),
.wbm_ack_i (wbm_ack_i),
.chain_four (chain_four),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care)
);
vga_mem_arbitrer mem_arbitrer (
.clk_i (wb_clk_i),
.rst_i (wb_rst_i),
.wb_adr_i (wbm_adr_o),
.wb_sel_i (wbm_sel_o),
.wb_we_i (wbm_we_o),
.wb_dat_i (wbm_dat_o),
.wb_dat_o (wbm_dat_i),
.wb_stb_i (wbm_stb_o),
.wb_ack_o (wbm_ack_i),
.csr_adr_i (csr_adr_i),
.csr_dat_o (csr_dat_i),
.csr_stb_i (csr_stb_i),
.csrm_adr_o (csrm_adr_o),
.csrm_sel_o (csrm_sel_o),
.csrm_we_o (csrm_we_o),
.csrm_dat_o (csrm_dat_o),
.csrm_dat_i (csrm_dat_i)
);
// Continous assignments
assign wb_dat_o = wb_tga_i ? conf_wb_dat_o : mem_wb_dat_o;
assign wb_ack_o = wb_tga_i ? conf_wb_ack_o : mem_wb_ack_o;
assign stb = wb_stb_i & wb_cyc_i;
assign vert_sync = ~graphics_alpha ^ w_vert_sync;
// Behaviour
// csr_adr_i
always @(posedge wb_clk_i)
csr_adr_i <= wb_rst_i ? 17'h0 : csr_adr_o + start_addr[15:1];
// csr_stb_i
always @(posedge wb_clk_i)
csr_stb_i <= wb_rst_i ? 1'b0 : csr_stb_o;
endmodule
|
/*
* VGA top level file
* Copyright (C) 2010 Zeus Gomez Marmolejo <zeus@aluzina.org>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module vga (
// Wishbone signals
input wb_clk_i, // 25 Mhz VDU clock
input wb_rst_i,
input [15:0] wb_dat_i,
output [15:0] wb_dat_o,
input [16:1] wb_adr_i,
input wb_we_i,
input wb_tga_i,
input [ 1:0] wb_sel_i,
input wb_stb_i,
input wb_cyc_i,
output wb_ack_o,
// VGA pad signals
output [ 3:0] vga_red_o,
output [ 3:0] vga_green_o,
output [ 3:0] vga_blue_o,
output horiz_sync,
output vert_sync,
// CSR SRAM master interface
output [17:1] csrm_adr_o,
output [ 1:0] csrm_sel_o,
output csrm_we_o,
output [15:0] csrm_dat_o,
input [15:0] csrm_dat_i
);
// Registers and nets
//
// csr address
reg [17:1] csr_adr_i;
reg csr_stb_i;
// Config wires
wire [15:0] conf_wb_dat_o;
wire conf_wb_ack_o;
// Mem wires
wire [15:0] mem_wb_dat_o;
wire mem_wb_ack_o;
// LCD wires
wire [17:1] csr_adr_o;
wire [15:0] csr_dat_i;
wire csr_stb_o;
wire v_retrace;
wire vh_retrace;
wire w_vert_sync;
// VGA configuration registers
wire shift_reg1;
wire graphics_alpha;
wire memory_mapping1;
wire [ 1:0] write_mode;
wire [ 1:0] raster_op;
wire read_mode;
wire [ 7:0] bitmask;
wire [ 3:0] set_reset;
wire [ 3:0] enable_set_reset;
wire [ 3:0] map_mask;
wire x_dotclockdiv2;
wire chain_four;
wire [ 1:0] read_map_select;
wire [ 3:0] color_compare;
wire [ 3:0] color_dont_care;
// Wishbone master to SRAM
wire [17:1] wbm_adr_o;
wire [ 1:0] wbm_sel_o;
wire wbm_we_o;
wire [15:0] wbm_dat_o;
wire [15:0] wbm_dat_i;
wire wbm_stb_o;
wire wbm_ack_i;
wire stb;
// CRT wires
wire [ 5:0] cur_start;
wire [ 5:0] cur_end;
wire [15:0] start_addr;
wire [ 4:0] vcursor;
wire [ 6:0] hcursor;
wire [ 6:0] horiz_total;
wire [ 6:0] end_horiz;
wire [ 6:0] st_hor_retr;
wire [ 4:0] end_hor_retr;
wire [ 9:0] vert_total;
wire [ 9:0] end_vert;
wire [ 9:0] st_ver_retr;
wire [ 3:0] end_ver_retr;
// attribute_ctrl wires
wire [3:0] pal_addr;
wire pal_we;
wire [7:0] pal_read;
wire [7:0] pal_write;
// dac_regs wires
wire dac_we;
wire [1:0] dac_read_data_cycle;
wire [7:0] dac_read_data_register;
wire [3:0] dac_read_data;
wire [1:0] dac_write_data_cycle;
wire [7:0] dac_write_data_register;
wire [3:0] dac_write_data;
// Module instances
//
vga_config_iface config_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wb_dat_i (wb_dat_i),
.wb_dat_o (conf_wb_dat_o),
.wb_adr_i (wb_adr_i[4:1]),
.wb_we_i (wb_we_i),
.wb_sel_i (wb_sel_i),
.wb_stb_i (stb & wb_tga_i),
.wb_ack_o (conf_wb_ack_o),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.x_dotclockdiv2 (x_dotclockdiv2),
.chain_four (chain_four),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.cur_start (cur_start),
.cur_end (cur_end),
.start_addr (start_addr),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_lcd lcd (
.clk (wb_clk_i),
.rst (wb_rst_i),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.csr_adr_o (csr_adr_o),
.csr_dat_i (csr_dat_i),
.csr_stb_o (csr_stb_o),
.vga_red_o (vga_red_o),
.vga_green_o (vga_green_o),
.vga_blue_o (vga_blue_o),
.horiz_sync (horiz_sync),
.vert_sync (w_vert_sync),
.cur_start (cur_start),
.cur_end (cur_end),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.x_dotclockdiv2 (x_dotclockdiv2),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_cpu_mem_iface cpu_mem_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wbs_adr_i (wb_adr_i),
.wbs_sel_i (wb_sel_i),
.wbs_we_i (wb_we_i),
.wbs_dat_i (wb_dat_i),
.wbs_dat_o (mem_wb_dat_o),
.wbs_stb_i (stb & !wb_tga_i),
.wbs_ack_o (mem_wb_ack_o),
.wbm_adr_o (wbm_adr_o),
.wbm_sel_o (wbm_sel_o),
.wbm_we_o (wbm_we_o),
.wbm_dat_o (wbm_dat_o),
.wbm_dat_i (wbm_dat_i),
.wbm_stb_o (wbm_stb_o),
.wbm_ack_i (wbm_ack_i),
.chain_four (chain_four),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care)
);
vga_mem_arbitrer mem_arbitrer (
.clk_i (wb_clk_i),
.rst_i (wb_rst_i),
.wb_adr_i (wbm_adr_o),
.wb_sel_i (wbm_sel_o),
.wb_we_i (wbm_we_o),
.wb_dat_i (wbm_dat_o),
.wb_dat_o (wbm_dat_i),
.wb_stb_i (wbm_stb_o),
.wb_ack_o (wbm_ack_i),
.csr_adr_i (csr_adr_i),
.csr_dat_o (csr_dat_i),
.csr_stb_i (csr_stb_i),
.csrm_adr_o (csrm_adr_o),
.csrm_sel_o (csrm_sel_o),
.csrm_we_o (csrm_we_o),
.csrm_dat_o (csrm_dat_o),
.csrm_dat_i (csrm_dat_i)
);
// Continous assignments
assign wb_dat_o = wb_tga_i ? conf_wb_dat_o : mem_wb_dat_o;
assign wb_ack_o = wb_tga_i ? conf_wb_ack_o : mem_wb_ack_o;
assign stb = wb_stb_i & wb_cyc_i;
assign vert_sync = ~graphics_alpha ^ w_vert_sync;
// Behaviour
// csr_adr_i
always @(posedge wb_clk_i)
csr_adr_i <= wb_rst_i ? 17'h0 : csr_adr_o + start_addr[15:1];
// csr_stb_i
always @(posedge wb_clk_i)
csr_stb_i <= wb_rst_i ? 1'b0 : csr_stb_o;
endmodule
|
/*
* VGA top level file
* Copyright (C) 2010 Zeus Gomez Marmolejo <zeus@aluzina.org>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module vga (
// Wishbone signals
input wb_clk_i, // 25 Mhz VDU clock
input wb_rst_i,
input [15:0] wb_dat_i,
output [15:0] wb_dat_o,
input [16:1] wb_adr_i,
input wb_we_i,
input wb_tga_i,
input [ 1:0] wb_sel_i,
input wb_stb_i,
input wb_cyc_i,
output wb_ack_o,
// VGA pad signals
output [ 3:0] vga_red_o,
output [ 3:0] vga_green_o,
output [ 3:0] vga_blue_o,
output horiz_sync,
output vert_sync,
// CSR SRAM master interface
output [17:1] csrm_adr_o,
output [ 1:0] csrm_sel_o,
output csrm_we_o,
output [15:0] csrm_dat_o,
input [15:0] csrm_dat_i
);
// Registers and nets
//
// csr address
reg [17:1] csr_adr_i;
reg csr_stb_i;
// Config wires
wire [15:0] conf_wb_dat_o;
wire conf_wb_ack_o;
// Mem wires
wire [15:0] mem_wb_dat_o;
wire mem_wb_ack_o;
// LCD wires
wire [17:1] csr_adr_o;
wire [15:0] csr_dat_i;
wire csr_stb_o;
wire v_retrace;
wire vh_retrace;
wire w_vert_sync;
// VGA configuration registers
wire shift_reg1;
wire graphics_alpha;
wire memory_mapping1;
wire [ 1:0] write_mode;
wire [ 1:0] raster_op;
wire read_mode;
wire [ 7:0] bitmask;
wire [ 3:0] set_reset;
wire [ 3:0] enable_set_reset;
wire [ 3:0] map_mask;
wire x_dotclockdiv2;
wire chain_four;
wire [ 1:0] read_map_select;
wire [ 3:0] color_compare;
wire [ 3:0] color_dont_care;
// Wishbone master to SRAM
wire [17:1] wbm_adr_o;
wire [ 1:0] wbm_sel_o;
wire wbm_we_o;
wire [15:0] wbm_dat_o;
wire [15:0] wbm_dat_i;
wire wbm_stb_o;
wire wbm_ack_i;
wire stb;
// CRT wires
wire [ 5:0] cur_start;
wire [ 5:0] cur_end;
wire [15:0] start_addr;
wire [ 4:0] vcursor;
wire [ 6:0] hcursor;
wire [ 6:0] horiz_total;
wire [ 6:0] end_horiz;
wire [ 6:0] st_hor_retr;
wire [ 4:0] end_hor_retr;
wire [ 9:0] vert_total;
wire [ 9:0] end_vert;
wire [ 9:0] st_ver_retr;
wire [ 3:0] end_ver_retr;
// attribute_ctrl wires
wire [3:0] pal_addr;
wire pal_we;
wire [7:0] pal_read;
wire [7:0] pal_write;
// dac_regs wires
wire dac_we;
wire [1:0] dac_read_data_cycle;
wire [7:0] dac_read_data_register;
wire [3:0] dac_read_data;
wire [1:0] dac_write_data_cycle;
wire [7:0] dac_write_data_register;
wire [3:0] dac_write_data;
// Module instances
//
vga_config_iface config_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wb_dat_i (wb_dat_i),
.wb_dat_o (conf_wb_dat_o),
.wb_adr_i (wb_adr_i[4:1]),
.wb_we_i (wb_we_i),
.wb_sel_i (wb_sel_i),
.wb_stb_i (stb & wb_tga_i),
.wb_ack_o (conf_wb_ack_o),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.x_dotclockdiv2 (x_dotclockdiv2),
.chain_four (chain_four),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.cur_start (cur_start),
.cur_end (cur_end),
.start_addr (start_addr),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_lcd lcd (
.clk (wb_clk_i),
.rst (wb_rst_i),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.csr_adr_o (csr_adr_o),
.csr_dat_i (csr_dat_i),
.csr_stb_o (csr_stb_o),
.vga_red_o (vga_red_o),
.vga_green_o (vga_green_o),
.vga_blue_o (vga_blue_o),
.horiz_sync (horiz_sync),
.vert_sync (w_vert_sync),
.cur_start (cur_start),
.cur_end (cur_end),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.x_dotclockdiv2 (x_dotclockdiv2),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_cpu_mem_iface cpu_mem_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wbs_adr_i (wb_adr_i),
.wbs_sel_i (wb_sel_i),
.wbs_we_i (wb_we_i),
.wbs_dat_i (wb_dat_i),
.wbs_dat_o (mem_wb_dat_o),
.wbs_stb_i (stb & !wb_tga_i),
.wbs_ack_o (mem_wb_ack_o),
.wbm_adr_o (wbm_adr_o),
.wbm_sel_o (wbm_sel_o),
.wbm_we_o (wbm_we_o),
.wbm_dat_o (wbm_dat_o),
.wbm_dat_i (wbm_dat_i),
.wbm_stb_o (wbm_stb_o),
.wbm_ack_i (wbm_ack_i),
.chain_four (chain_four),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care)
);
vga_mem_arbitrer mem_arbitrer (
.clk_i (wb_clk_i),
.rst_i (wb_rst_i),
.wb_adr_i (wbm_adr_o),
.wb_sel_i (wbm_sel_o),
.wb_we_i (wbm_we_o),
.wb_dat_i (wbm_dat_o),
.wb_dat_o (wbm_dat_i),
.wb_stb_i (wbm_stb_o),
.wb_ack_o (wbm_ack_i),
.csr_adr_i (csr_adr_i),
.csr_dat_o (csr_dat_i),
.csr_stb_i (csr_stb_i),
.csrm_adr_o (csrm_adr_o),
.csrm_sel_o (csrm_sel_o),
.csrm_we_o (csrm_we_o),
.csrm_dat_o (csrm_dat_o),
.csrm_dat_i (csrm_dat_i)
);
// Continous assignments
assign wb_dat_o = wb_tga_i ? conf_wb_dat_o : mem_wb_dat_o;
assign wb_ack_o = wb_tga_i ? conf_wb_ack_o : mem_wb_ack_o;
assign stb = wb_stb_i & wb_cyc_i;
assign vert_sync = ~graphics_alpha ^ w_vert_sync;
// Behaviour
// csr_adr_i
always @(posedge wb_clk_i)
csr_adr_i <= wb_rst_i ? 17'h0 : csr_adr_o + start_addr[15:1];
// csr_stb_i
always @(posedge wb_clk_i)
csr_stb_i <= wb_rst_i ? 1'b0 : csr_stb_o;
endmodule
|
/*
* VGA top level file
* Copyright (C) 2010 Zeus Gomez Marmolejo <zeus@aluzina.org>
*
* This file is part of the Zet processor. This processor is free
* hardware; you can redistribute it and/or modify it under the terms of
* the GNU General Public License as published by the Free Software
* Foundation; either version 3, or (at your option) any later version.
*
* Zet is distrubuted in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
* License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Zet; see the file COPYING. If not, see
* <http://www.gnu.org/licenses/>.
*/
module vga (
// Wishbone signals
input wb_clk_i, // 25 Mhz VDU clock
input wb_rst_i,
input [15:0] wb_dat_i,
output [15:0] wb_dat_o,
input [16:1] wb_adr_i,
input wb_we_i,
input wb_tga_i,
input [ 1:0] wb_sel_i,
input wb_stb_i,
input wb_cyc_i,
output wb_ack_o,
// VGA pad signals
output [ 3:0] vga_red_o,
output [ 3:0] vga_green_o,
output [ 3:0] vga_blue_o,
output horiz_sync,
output vert_sync,
// CSR SRAM master interface
output [17:1] csrm_adr_o,
output [ 1:0] csrm_sel_o,
output csrm_we_o,
output [15:0] csrm_dat_o,
input [15:0] csrm_dat_i
);
// Registers and nets
//
// csr address
reg [17:1] csr_adr_i;
reg csr_stb_i;
// Config wires
wire [15:0] conf_wb_dat_o;
wire conf_wb_ack_o;
// Mem wires
wire [15:0] mem_wb_dat_o;
wire mem_wb_ack_o;
// LCD wires
wire [17:1] csr_adr_o;
wire [15:0] csr_dat_i;
wire csr_stb_o;
wire v_retrace;
wire vh_retrace;
wire w_vert_sync;
// VGA configuration registers
wire shift_reg1;
wire graphics_alpha;
wire memory_mapping1;
wire [ 1:0] write_mode;
wire [ 1:0] raster_op;
wire read_mode;
wire [ 7:0] bitmask;
wire [ 3:0] set_reset;
wire [ 3:0] enable_set_reset;
wire [ 3:0] map_mask;
wire x_dotclockdiv2;
wire chain_four;
wire [ 1:0] read_map_select;
wire [ 3:0] color_compare;
wire [ 3:0] color_dont_care;
// Wishbone master to SRAM
wire [17:1] wbm_adr_o;
wire [ 1:0] wbm_sel_o;
wire wbm_we_o;
wire [15:0] wbm_dat_o;
wire [15:0] wbm_dat_i;
wire wbm_stb_o;
wire wbm_ack_i;
wire stb;
// CRT wires
wire [ 5:0] cur_start;
wire [ 5:0] cur_end;
wire [15:0] start_addr;
wire [ 4:0] vcursor;
wire [ 6:0] hcursor;
wire [ 6:0] horiz_total;
wire [ 6:0] end_horiz;
wire [ 6:0] st_hor_retr;
wire [ 4:0] end_hor_retr;
wire [ 9:0] vert_total;
wire [ 9:0] end_vert;
wire [ 9:0] st_ver_retr;
wire [ 3:0] end_ver_retr;
// attribute_ctrl wires
wire [3:0] pal_addr;
wire pal_we;
wire [7:0] pal_read;
wire [7:0] pal_write;
// dac_regs wires
wire dac_we;
wire [1:0] dac_read_data_cycle;
wire [7:0] dac_read_data_register;
wire [3:0] dac_read_data;
wire [1:0] dac_write_data_cycle;
wire [7:0] dac_write_data_register;
wire [3:0] dac_write_data;
// Module instances
//
vga_config_iface config_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wb_dat_i (wb_dat_i),
.wb_dat_o (conf_wb_dat_o),
.wb_adr_i (wb_adr_i[4:1]),
.wb_we_i (wb_we_i),
.wb_sel_i (wb_sel_i),
.wb_stb_i (stb & wb_tga_i),
.wb_ack_o (conf_wb_ack_o),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.x_dotclockdiv2 (x_dotclockdiv2),
.chain_four (chain_four),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.cur_start (cur_start),
.cur_end (cur_end),
.start_addr (start_addr),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_lcd lcd (
.clk (wb_clk_i),
.rst (wb_rst_i),
.shift_reg1 (shift_reg1),
.graphics_alpha (graphics_alpha),
.pal_addr (pal_addr),
.pal_we (pal_we),
.pal_read (pal_read),
.pal_write (pal_write),
.dac_we (dac_we),
.dac_read_data_cycle (dac_read_data_cycle),
.dac_read_data_register (dac_read_data_register),
.dac_read_data (dac_read_data),
.dac_write_data_cycle (dac_write_data_cycle),
.dac_write_data_register (dac_write_data_register),
.dac_write_data (dac_write_data),
.csr_adr_o (csr_adr_o),
.csr_dat_i (csr_dat_i),
.csr_stb_o (csr_stb_o),
.vga_red_o (vga_red_o),
.vga_green_o (vga_green_o),
.vga_blue_o (vga_blue_o),
.horiz_sync (horiz_sync),
.vert_sync (w_vert_sync),
.cur_start (cur_start),
.cur_end (cur_end),
.vcursor (vcursor),
.hcursor (hcursor),
.horiz_total (horiz_total),
.end_horiz (end_horiz),
.st_hor_retr (st_hor_retr),
.end_hor_retr (end_hor_retr),
.vert_total (vert_total),
.end_vert (end_vert),
.st_ver_retr (st_ver_retr),
.end_ver_retr (end_ver_retr),
.x_dotclockdiv2 (x_dotclockdiv2),
.v_retrace (v_retrace),
.vh_retrace (vh_retrace)
);
vga_cpu_mem_iface cpu_mem_iface (
.wb_clk_i (wb_clk_i),
.wb_rst_i (wb_rst_i),
.wbs_adr_i (wb_adr_i),
.wbs_sel_i (wb_sel_i),
.wbs_we_i (wb_we_i),
.wbs_dat_i (wb_dat_i),
.wbs_dat_o (mem_wb_dat_o),
.wbs_stb_i (stb & !wb_tga_i),
.wbs_ack_o (mem_wb_ack_o),
.wbm_adr_o (wbm_adr_o),
.wbm_sel_o (wbm_sel_o),
.wbm_we_o (wbm_we_o),
.wbm_dat_o (wbm_dat_o),
.wbm_dat_i (wbm_dat_i),
.wbm_stb_o (wbm_stb_o),
.wbm_ack_i (wbm_ack_i),
.chain_four (chain_four),
.memory_mapping1 (memory_mapping1),
.write_mode (write_mode),
.raster_op (raster_op),
.read_mode (read_mode),
.bitmask (bitmask),
.set_reset (set_reset),
.enable_set_reset (enable_set_reset),
.map_mask (map_mask),
.read_map_select (read_map_select),
.color_compare (color_compare),
.color_dont_care (color_dont_care)
);
vga_mem_arbitrer mem_arbitrer (
.clk_i (wb_clk_i),
.rst_i (wb_rst_i),
.wb_adr_i (wbm_adr_o),
.wb_sel_i (wbm_sel_o),
.wb_we_i (wbm_we_o),
.wb_dat_i (wbm_dat_o),
.wb_dat_o (wbm_dat_i),
.wb_stb_i (wbm_stb_o),
.wb_ack_o (wbm_ack_i),
.csr_adr_i (csr_adr_i),
.csr_dat_o (csr_dat_i),
.csr_stb_i (csr_stb_i),
.csrm_adr_o (csrm_adr_o),
.csrm_sel_o (csrm_sel_o),
.csrm_we_o (csrm_we_o),
.csrm_dat_o (csrm_dat_o),
.csrm_dat_i (csrm_dat_i)
);
// Continous assignments
assign wb_dat_o = wb_tga_i ? conf_wb_dat_o : mem_wb_dat_o;
assign wb_ack_o = wb_tga_i ? conf_wb_ack_o : mem_wb_ack_o;
assign stb = wb_stb_i & wb_cyc_i;
assign vert_sync = ~graphics_alpha ^ w_vert_sync;
// Behaviour
// csr_adr_i
always @(posedge wb_clk_i)
csr_adr_i <= wb_rst_i ? 17'h0 : csr_adr_o + start_addr[15:1];
// csr_stb_i
always @(posedge wb_clk_i)
csr_stb_i <= wb_rst_i ? 1'b0 : csr_stb_o;
endmodule
|
// This is a component of pluto_servo, a PWM servo driver and quadrature
// counter for emc2
// Copyright 2006 Jeff Epler <jepler@unpythonic.net>
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
module main(clk, led, nConfig, epp_nReset, pport_data, nWrite, nWait, nDataStr,
nAddrStr, dout, din, step, dir);
parameter W=10;
parameter F=11;
parameter T=4;
input clk;
output led, nConfig;
inout [7:0] pport_data;
input nWrite;
output nWait;
input nDataStr, nAddrStr, epp_nReset;
input [15:0] din;
reg Spolarity;
reg[13:0] real_dout; output [13:0] dout = do_tristate ? 14'bZ : real_dout;
wire[3:0] real_step; output [3:0] step = do_tristate ? 4'bZ : real_step ^ {4{Spolarity}};
wire[3:0] real_dir; output [3:0] dir = do_tristate ? 4'bZ : real_dir;
wire [W+F-1:0] pos0, pos1, pos2, pos3;
reg [F:0] vel0, vel1, vel2, vel3;
reg [T-1:0] dirtime, steptime;
reg [1:0] tap;
reg [10:0] div2048;
wire stepcnt = ~|(div2048[5:0]);
always @(posedge clk) begin
div2048 <= div2048 + 1'd1;
end
wire do_enable_wdt, do_tristate;
wdt w(clk, do_enable_wdt, &div2048, do_tristate);
stepgen #(W,F,T) s0(clk, stepcnt, pos0, vel0, dirtime, steptime, real_step[0], real_dir[0], tap);
stepgen #(W,F,T) s1(clk, stepcnt, pos1, vel1, dirtime, steptime, real_step[1], real_dir[1], tap);
stepgen #(W,F,T) s2(clk, stepcnt, pos2, vel2, dirtime, steptime, real_step[2], real_dir[2], tap);
stepgen #(W,F,T) s3(clk, stepcnt, pos3, vel3, dirtime, steptime, real_step[3], real_dir[3], tap);
// EPP stuff
wire EPP_write = ~nWrite;
wire EPP_read = nWrite;
wire EPP_addr_strobe = ~nAddrStr;
wire EPP_data_strobe = ~nDataStr;
wire EPP_strobe = EPP_data_strobe | EPP_addr_strobe;
wire EPP_wait; assign nWait = ~EPP_wait;
wire [7:0] EPP_datain = pport_data;
wire [7:0] EPP_dataout; assign pport_data = EPP_dataout;
reg [4:0] EPP_strobe_reg;
always @(posedge clk) EPP_strobe_reg <= {EPP_strobe_reg[3:0], EPP_strobe};
wire EPP_strobe_edge1 = (EPP_strobe_reg[2:1]==2'b01);
// reg led;
assign EPP_wait = EPP_strobe_reg[4];
wire[15:0] EPP_dataword = {EPP_datain, lowbyte};
reg[4:0] addr_reg;
reg[7:0] lowbyte;
always @(posedge clk)
if(EPP_strobe_edge1 & EPP_write & EPP_addr_strobe) begin
addr_reg <= EPP_datain[4:0];
end
else if(EPP_strobe_edge1 & !EPP_addr_strobe) addr_reg <= addr_reg + 4'd1;
always @(posedge clk) begin
if(EPP_strobe_edge1 & EPP_write & EPP_data_strobe) begin
if(addr_reg[3:0] == 4'd1) vel0 <= EPP_dataword[F:0];
else if(addr_reg[3:0] == 4'd3) vel1 <= EPP_dataword[F:0];
else if(addr_reg[3:0] == 4'd5) vel2 <= EPP_dataword[F:0];
else if(addr_reg[3:0] == 4'd7) vel3 <= EPP_dataword[F:0];
else if(addr_reg[3:0] == 4'd9) begin
real_dout <= { EPP_datain[5:0], lowbyte };
end
else if(addr_reg[3:0] == 4'd11) begin
tap <= lowbyte[7:6];
steptime <= lowbyte[T-1:0];
Spolarity <= EPP_datain[7];
// EPP_datain[6] is do_enable_wdt
dirtime <= EPP_datain[T-1:0];
end
else lowbyte <= EPP_datain;
end
end
reg [31:0] data_buf;
always @(posedge clk) begin
if(EPP_strobe_edge1 & EPP_read && addr_reg[1:0] == 2'd0) begin
if(addr_reg[4:2] == 3'd0) data_buf <= pos0;
else if(addr_reg[4:2] == 3'd1) data_buf <= pos1;
else if(addr_reg[4:2] == 3'd2) data_buf <= pos2;
else if(addr_reg[4:2] == 3'd3) data_buf <= pos3;
else if(addr_reg[4:2] == 3'd4)
data_buf <= din;
end
end
// the addr_reg test looks funny because it is auto-incremented in an always
// block so "1" reads the low byte, "2 and "3" read middle bytes, and "0"
// reads the high byte I have a feeling that I'm doing this in the wrong way.
wire [7:0] data_reg = addr_reg[1:0] == 2'd1 ? data_buf[7:0] :
(addr_reg[1:0] == 2'd2 ? data_buf[15:8] :
(addr_reg[1:0] == 2'd3 ? data_buf[23:16] :
data_buf[31:24]));
wire [7:0] EPP_data_mux = data_reg;
assign EPP_dataout = (EPP_read & EPP_wait) ? EPP_data_mux : 8'hZZ;
// assign do_enable_wdt = EPP_strobe_edge1 & EPP_write & EPP_data_strobe & (addr_reg[3:0] == 4'd9) & EPP_datain[6];
// assign led = do_tristate ? 1'BZ : (real_step[0] ^ real_dir[0]);
assign led = do_tristate ? 1'bZ : (real_step[0] ^ real_dir[0]);
assign nConfig = epp_nReset; // 1'b1;
assign do_enable_wdt = EPP_strobe_edge1 & EPP_write & EPP_data_strobe & (addr_reg[3:0] == 4'd9) & EPP_datain[6];
endmodule
|
// This is a component of pluto_servo, a PWM servo driver and quadrature
// counter for emc2
// Copyright 2006 Jeff Epler <jepler@unpythonic.net>
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
module main(clk, led, nConfig, epp_nReset, pport_data, nWrite, nWait, nDataStr,
nAddrStr, dout, din, step, dir);
parameter W=10;
parameter F=11;
parameter T=4;
input clk;
output led, nConfig;
inout [7:0] pport_data;
input nWrite;
output nWait;
input nDataStr, nAddrStr, epp_nReset;
input [15:0] din;
reg Spolarity;
reg[13:0] real_dout; output [13:0] dout = do_tristate ? 14'bZ : real_dout;
wire[3:0] real_step; output [3:0] step = do_tristate ? 4'bZ : real_step ^ {4{Spolarity}};
wire[3:0] real_dir; output [3:0] dir = do_tristate ? 4'bZ : real_dir;
wire [W+F-1:0] pos0, pos1, pos2, pos3;
reg [F:0] vel0, vel1, vel2, vel3;
reg [T-1:0] dirtime, steptime;
reg [1:0] tap;
reg [10:0] div2048;
wire stepcnt = ~|(div2048[5:0]);
always @(posedge clk) begin
div2048 <= div2048 + 1'd1;
end
wire do_enable_wdt, do_tristate;
wdt w(clk, do_enable_wdt, &div2048, do_tristate);
stepgen #(W,F,T) s0(clk, stepcnt, pos0, vel0, dirtime, steptime, real_step[0], real_dir[0], tap);
stepgen #(W,F,T) s1(clk, stepcnt, pos1, vel1, dirtime, steptime, real_step[1], real_dir[1], tap);
stepgen #(W,F,T) s2(clk, stepcnt, pos2, vel2, dirtime, steptime, real_step[2], real_dir[2], tap);
stepgen #(W,F,T) s3(clk, stepcnt, pos3, vel3, dirtime, steptime, real_step[3], real_dir[3], tap);
// EPP stuff
wire EPP_write = ~nWrite;
wire EPP_read = nWrite;
wire EPP_addr_strobe = ~nAddrStr;
wire EPP_data_strobe = ~nDataStr;
wire EPP_strobe = EPP_data_strobe | EPP_addr_strobe;
wire EPP_wait; assign nWait = ~EPP_wait;
wire [7:0] EPP_datain = pport_data;
wire [7:0] EPP_dataout; assign pport_data = EPP_dataout;
reg [4:0] EPP_strobe_reg;
always @(posedge clk) EPP_strobe_reg <= {EPP_strobe_reg[3:0], EPP_strobe};
wire EPP_strobe_edge1 = (EPP_strobe_reg[2:1]==2'b01);
// reg led;
assign EPP_wait = EPP_strobe_reg[4];
wire[15:0] EPP_dataword = {EPP_datain, lowbyte};
reg[4:0] addr_reg;
reg[7:0] lowbyte;
always @(posedge clk)
if(EPP_strobe_edge1 & EPP_write & EPP_addr_strobe) begin
addr_reg <= EPP_datain[4:0];
end
else if(EPP_strobe_edge1 & !EPP_addr_strobe) addr_reg <= addr_reg + 4'd1;
always @(posedge clk) begin
if(EPP_strobe_edge1 & EPP_write & EPP_data_strobe) begin
if(addr_reg[3:0] == 4'd1) vel0 <= EPP_dataword[F:0];
else if(addr_reg[3:0] == 4'd3) vel1 <= EPP_dataword[F:0];
else if(addr_reg[3:0] == 4'd5) vel2 <= EPP_dataword[F:0];
else if(addr_reg[3:0] == 4'd7) vel3 <= EPP_dataword[F:0];
else if(addr_reg[3:0] == 4'd9) begin
real_dout <= { EPP_datain[5:0], lowbyte };
end
else if(addr_reg[3:0] == 4'd11) begin
tap <= lowbyte[7:6];
steptime <= lowbyte[T-1:0];
Spolarity <= EPP_datain[7];
// EPP_datain[6] is do_enable_wdt
dirtime <= EPP_datain[T-1:0];
end
else lowbyte <= EPP_datain;
end
end
reg [31:0] data_buf;
always @(posedge clk) begin
if(EPP_strobe_edge1 & EPP_read && addr_reg[1:0] == 2'd0) begin
if(addr_reg[4:2] == 3'd0) data_buf <= pos0;
else if(addr_reg[4:2] == 3'd1) data_buf <= pos1;
else if(addr_reg[4:2] == 3'd2) data_buf <= pos2;
else if(addr_reg[4:2] == 3'd3) data_buf <= pos3;
else if(addr_reg[4:2] == 3'd4)
data_buf <= din;
end
end
// the addr_reg test looks funny because it is auto-incremented in an always
// block so "1" reads the low byte, "2 and "3" read middle bytes, and "0"
// reads the high byte I have a feeling that I'm doing this in the wrong way.
wire [7:0] data_reg = addr_reg[1:0] == 2'd1 ? data_buf[7:0] :
(addr_reg[1:0] == 2'd2 ? data_buf[15:8] :
(addr_reg[1:0] == 2'd3 ? data_buf[23:16] :
data_buf[31:24]));
wire [7:0] EPP_data_mux = data_reg;
assign EPP_dataout = (EPP_read & EPP_wait) ? EPP_data_mux : 8'hZZ;
// assign do_enable_wdt = EPP_strobe_edge1 & EPP_write & EPP_data_strobe & (addr_reg[3:0] == 4'd9) & EPP_datain[6];
// assign led = do_tristate ? 1'BZ : (real_step[0] ^ real_dir[0]);
assign led = do_tristate ? 1'bZ : (real_step[0] ^ real_dir[0]);
assign nConfig = epp_nReset; // 1'b1;
assign do_enable_wdt = EPP_strobe_edge1 & EPP_write & EPP_data_strobe & (addr_reg[3:0] == 4'd9) & EPP_datain[6];
endmodule
|
// This is a component of pluto_servo, a PWM servo driver and quadrature
// counter for emc2
// Copyright 2006 Jeff Epler <jepler@unpythonic.net>
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
module main(clk, led, nConfig, epp_nReset, pport_data, nWrite, nWait, nDataStr,
nAddrStr, dout, din, step, dir);
parameter W=10;
parameter F=11;
parameter T=4;
input clk;
output led, nConfig;
inout [7:0] pport_data;
input nWrite;
output nWait;
input nDataStr, nAddrStr, epp_nReset;
input [15:0] din;
reg Spolarity;
reg[13:0] real_dout; output [13:0] dout = do_tristate ? 14'bZ : real_dout;
wire[3:0] real_step; output [3:0] step = do_tristate ? 4'bZ : real_step ^ {4{Spolarity}};
wire[3:0] real_dir; output [3:0] dir = do_tristate ? 4'bZ : real_dir;
wire [W+F-1:0] pos0, pos1, pos2, pos3;
reg [F:0] vel0, vel1, vel2, vel3;
reg [T-1:0] dirtime, steptime;
reg [1:0] tap;
reg [10:0] div2048;
wire stepcnt = ~|(div2048[5:0]);
always @(posedge clk) begin
div2048 <= div2048 + 1'd1;
end
wire do_enable_wdt, do_tristate;
wdt w(clk, do_enable_wdt, &div2048, do_tristate);
stepgen #(W,F,T) s0(clk, stepcnt, pos0, vel0, dirtime, steptime, real_step[0], real_dir[0], tap);
stepgen #(W,F,T) s1(clk, stepcnt, pos1, vel1, dirtime, steptime, real_step[1], real_dir[1], tap);
stepgen #(W,F,T) s2(clk, stepcnt, pos2, vel2, dirtime, steptime, real_step[2], real_dir[2], tap);
stepgen #(W,F,T) s3(clk, stepcnt, pos3, vel3, dirtime, steptime, real_step[3], real_dir[3], tap);
// EPP stuff
wire EPP_write = ~nWrite;
wire EPP_read = nWrite;
wire EPP_addr_strobe = ~nAddrStr;
wire EPP_data_strobe = ~nDataStr;
wire EPP_strobe = EPP_data_strobe | EPP_addr_strobe;
wire EPP_wait; assign nWait = ~EPP_wait;
wire [7:0] EPP_datain = pport_data;
wire [7:0] EPP_dataout; assign pport_data = EPP_dataout;
reg [4:0] EPP_strobe_reg;
always @(posedge clk) EPP_strobe_reg <= {EPP_strobe_reg[3:0], EPP_strobe};
wire EPP_strobe_edge1 = (EPP_strobe_reg[2:1]==2'b01);
// reg led;
assign EPP_wait = EPP_strobe_reg[4];
wire[15:0] EPP_dataword = {EPP_datain, lowbyte};
reg[4:0] addr_reg;
reg[7:0] lowbyte;
always @(posedge clk)
if(EPP_strobe_edge1 & EPP_write & EPP_addr_strobe) begin
addr_reg <= EPP_datain[4:0];
end
else if(EPP_strobe_edge1 & !EPP_addr_strobe) addr_reg <= addr_reg + 4'd1;
always @(posedge clk) begin
if(EPP_strobe_edge1 & EPP_write & EPP_data_strobe) begin
if(addr_reg[3:0] == 4'd1) vel0 <= EPP_dataword[F:0];
else if(addr_reg[3:0] == 4'd3) vel1 <= EPP_dataword[F:0];
else if(addr_reg[3:0] == 4'd5) vel2 <= EPP_dataword[F:0];
else if(addr_reg[3:0] == 4'd7) vel3 <= EPP_dataword[F:0];
else if(addr_reg[3:0] == 4'd9) begin
real_dout <= { EPP_datain[5:0], lowbyte };
end
else if(addr_reg[3:0] == 4'd11) begin
tap <= lowbyte[7:6];
steptime <= lowbyte[T-1:0];
Spolarity <= EPP_datain[7];
// EPP_datain[6] is do_enable_wdt
dirtime <= EPP_datain[T-1:0];
end
else lowbyte <= EPP_datain;
end
end
reg [31:0] data_buf;
always @(posedge clk) begin
if(EPP_strobe_edge1 & EPP_read && addr_reg[1:0] == 2'd0) begin
if(addr_reg[4:2] == 3'd0) data_buf <= pos0;
else if(addr_reg[4:2] == 3'd1) data_buf <= pos1;
else if(addr_reg[4:2] == 3'd2) data_buf <= pos2;
else if(addr_reg[4:2] == 3'd3) data_buf <= pos3;
else if(addr_reg[4:2] == 3'd4)
data_buf <= din;
end
end
// the addr_reg test looks funny because it is auto-incremented in an always
// block so "1" reads the low byte, "2 and "3" read middle bytes, and "0"
// reads the high byte I have a feeling that I'm doing this in the wrong way.
wire [7:0] data_reg = addr_reg[1:0] == 2'd1 ? data_buf[7:0] :
(addr_reg[1:0] == 2'd2 ? data_buf[15:8] :
(addr_reg[1:0] == 2'd3 ? data_buf[23:16] :
data_buf[31:24]));
wire [7:0] EPP_data_mux = data_reg;
assign EPP_dataout = (EPP_read & EPP_wait) ? EPP_data_mux : 8'hZZ;
// assign do_enable_wdt = EPP_strobe_edge1 & EPP_write & EPP_data_strobe & (addr_reg[3:0] == 4'd9) & EPP_datain[6];
// assign led = do_tristate ? 1'BZ : (real_step[0] ^ real_dir[0]);
assign led = do_tristate ? 1'bZ : (real_step[0] ^ real_dir[0]);
assign nConfig = epp_nReset; // 1'b1;
assign do_enable_wdt = EPP_strobe_edge1 & EPP_write & EPP_data_strobe & (addr_reg[3:0] == 4'd9) & EPP_datain[6];
endmodule
|
///////////////////////////////////////////////////////////////////////////////
//
// File name: axi_protocol_converter_v2_1_b2s_rd_cmd_fsm.v
//
///////////////////////////////////////////////////////////////////////////////
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_b2s_rd_cmd_fsm (
///////////////////////////////////////////////////////////////////////////////
// Port Declarations
///////////////////////////////////////////////////////////////////////////////
input wire clk ,
input wire reset ,
output wire s_arready ,
input wire s_arvalid ,
input wire [7:0] s_arlen ,
output wire m_arvalid ,
input wire m_arready ,
// signal to increment to the next mc transaction
output wire next ,
// signal to the fsm there is another transaction required
input wire next_pending ,
// Write Data portion has completed or Read FIFO has a slot available (not
// full)
input wire data_ready ,
// status signal for w_channel when command is written.
output wire a_push ,
output wire r_push
);
////////////////////////////////////////////////////////////////////////////////
// Local parameters
////////////////////////////////////////////////////////////////////////////////
// States
localparam SM_IDLE = 2'b00;
localparam SM_CMD_EN = 2'b01;
localparam SM_CMD_ACCEPTED = 2'b10;
localparam SM_DONE = 2'b11;
////////////////////////////////////////////////////////////////////////////////
// Wires/Reg declarations
////////////////////////////////////////////////////////////////////////////////
reg [1:0] state;
// synthesis attribute MAX_FANOUT of state is 20;
reg [1:0] state_r1;
reg [1:0] next_state;
reg [7:0] s_arlen_r;
////////////////////////////////////////////////////////////////////////////////
// BEGIN RTL
///////////////////////////////////////////////////////////////////////////////
// register for timing
always @(posedge clk) begin
if (reset) begin
state <= SM_IDLE;
state_r1 <= SM_IDLE;
s_arlen_r <= 0;
end else begin
state <= next_state;
state_r1 <= state;
s_arlen_r <= s_arlen;
end
end
// Next state transitions.
always @( * ) begin
next_state = state;
case (state)
SM_IDLE:
if (s_arvalid & data_ready) begin
next_state = SM_CMD_EN;
end else begin
next_state = state;
end
SM_CMD_EN:
///////////////////////////////////////////////////////////////////
// Drive m_arvalid downstream in this state
///////////////////////////////////////////////////////////////////
//If there is no fifo space
if (~data_ready & m_arready & next_pending) begin
///////////////////////////////////////////////////////////////////
//There is more to do, wait until data space is available drop valid
next_state = SM_CMD_ACCEPTED;
end else if (m_arready & ~next_pending)begin
next_state = SM_DONE;
end else if (m_arready & next_pending) begin
next_state = SM_CMD_EN;
end else begin
next_state = state;
end
SM_CMD_ACCEPTED:
if (data_ready) begin
next_state = SM_CMD_EN;
end else begin
next_state = state;
end
SM_DONE:
next_state = SM_IDLE;
default:
next_state = SM_IDLE;
endcase
end
// Assign outputs based on current state.
assign m_arvalid = (state == SM_CMD_EN);
assign next = m_arready && (state == SM_CMD_EN);
assign r_push = next;
assign a_push = (state == SM_IDLE);
assign s_arready = ((state == SM_CMD_EN) || (state == SM_DONE)) && (next_state == SM_IDLE);
endmodule
`default_nettype wire
|
///////////////////////////////////////////////////////////////////////////////
//
// File name: axi_protocol_converter_v2_1_b2s_rd_cmd_fsm.v
//
///////////////////////////////////////////////////////////////////////////////
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_b2s_rd_cmd_fsm (
///////////////////////////////////////////////////////////////////////////////
// Port Declarations
///////////////////////////////////////////////////////////////////////////////
input wire clk ,
input wire reset ,
output wire s_arready ,
input wire s_arvalid ,
input wire [7:0] s_arlen ,
output wire m_arvalid ,
input wire m_arready ,
// signal to increment to the next mc transaction
output wire next ,
// signal to the fsm there is another transaction required
input wire next_pending ,
// Write Data portion has completed or Read FIFO has a slot available (not
// full)
input wire data_ready ,
// status signal for w_channel when command is written.
output wire a_push ,
output wire r_push
);
////////////////////////////////////////////////////////////////////////////////
// Local parameters
////////////////////////////////////////////////////////////////////////////////
// States
localparam SM_IDLE = 2'b00;
localparam SM_CMD_EN = 2'b01;
localparam SM_CMD_ACCEPTED = 2'b10;
localparam SM_DONE = 2'b11;
////////////////////////////////////////////////////////////////////////////////
// Wires/Reg declarations
////////////////////////////////////////////////////////////////////////////////
reg [1:0] state;
// synthesis attribute MAX_FANOUT of state is 20;
reg [1:0] state_r1;
reg [1:0] next_state;
reg [7:0] s_arlen_r;
////////////////////////////////////////////////////////////////////////////////
// BEGIN RTL
///////////////////////////////////////////////////////////////////////////////
// register for timing
always @(posedge clk) begin
if (reset) begin
state <= SM_IDLE;
state_r1 <= SM_IDLE;
s_arlen_r <= 0;
end else begin
state <= next_state;
state_r1 <= state;
s_arlen_r <= s_arlen;
end
end
// Next state transitions.
always @( * ) begin
next_state = state;
case (state)
SM_IDLE:
if (s_arvalid & data_ready) begin
next_state = SM_CMD_EN;
end else begin
next_state = state;
end
SM_CMD_EN:
///////////////////////////////////////////////////////////////////
// Drive m_arvalid downstream in this state
///////////////////////////////////////////////////////////////////
//If there is no fifo space
if (~data_ready & m_arready & next_pending) begin
///////////////////////////////////////////////////////////////////
//There is more to do, wait until data space is available drop valid
next_state = SM_CMD_ACCEPTED;
end else if (m_arready & ~next_pending)begin
next_state = SM_DONE;
end else if (m_arready & next_pending) begin
next_state = SM_CMD_EN;
end else begin
next_state = state;
end
SM_CMD_ACCEPTED:
if (data_ready) begin
next_state = SM_CMD_EN;
end else begin
next_state = state;
end
SM_DONE:
next_state = SM_IDLE;
default:
next_state = SM_IDLE;
endcase
end
// Assign outputs based on current state.
assign m_arvalid = (state == SM_CMD_EN);
assign next = m_arready && (state == SM_CMD_EN);
assign r_push = next;
assign a_push = (state == SM_IDLE);
assign s_arready = ((state == SM_CMD_EN) || (state == SM_DONE)) && (next_state == SM_IDLE);
endmodule
`default_nettype wire
|
///////////////////////////////////////////////////////////////////////////////
//
// File name: axi_protocol_converter_v2_1_b2s_rd_cmd_fsm.v
//
///////////////////////////////////////////////////////////////////////////////
`timescale 1ps/1ps
`default_nettype none
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_b2s_rd_cmd_fsm (
///////////////////////////////////////////////////////////////////////////////
// Port Declarations
///////////////////////////////////////////////////////////////////////////////
input wire clk ,
input wire reset ,
output wire s_arready ,
input wire s_arvalid ,
input wire [7:0] s_arlen ,
output wire m_arvalid ,
input wire m_arready ,
// signal to increment to the next mc transaction
output wire next ,
// signal to the fsm there is another transaction required
input wire next_pending ,
// Write Data portion has completed or Read FIFO has a slot available (not
// full)
input wire data_ready ,
// status signal for w_channel when command is written.
output wire a_push ,
output wire r_push
);
////////////////////////////////////////////////////////////////////////////////
// Local parameters
////////////////////////////////////////////////////////////////////////////////
// States
localparam SM_IDLE = 2'b00;
localparam SM_CMD_EN = 2'b01;
localparam SM_CMD_ACCEPTED = 2'b10;
localparam SM_DONE = 2'b11;
////////////////////////////////////////////////////////////////////////////////
// Wires/Reg declarations
////////////////////////////////////////////////////////////////////////////////
reg [1:0] state;
// synthesis attribute MAX_FANOUT of state is 20;
reg [1:0] state_r1;
reg [1:0] next_state;
reg [7:0] s_arlen_r;
////////////////////////////////////////////////////////////////////////////////
// BEGIN RTL
///////////////////////////////////////////////////////////////////////////////
// register for timing
always @(posedge clk) begin
if (reset) begin
state <= SM_IDLE;
state_r1 <= SM_IDLE;
s_arlen_r <= 0;
end else begin
state <= next_state;
state_r1 <= state;
s_arlen_r <= s_arlen;
end
end
// Next state transitions.
always @( * ) begin
next_state = state;
case (state)
SM_IDLE:
if (s_arvalid & data_ready) begin
next_state = SM_CMD_EN;
end else begin
next_state = state;
end
SM_CMD_EN:
///////////////////////////////////////////////////////////////////
// Drive m_arvalid downstream in this state
///////////////////////////////////////////////////////////////////
//If there is no fifo space
if (~data_ready & m_arready & next_pending) begin
///////////////////////////////////////////////////////////////////
//There is more to do, wait until data space is available drop valid
next_state = SM_CMD_ACCEPTED;
end else if (m_arready & ~next_pending)begin
next_state = SM_DONE;
end else if (m_arready & next_pending) begin
next_state = SM_CMD_EN;
end else begin
next_state = state;
end
SM_CMD_ACCEPTED:
if (data_ready) begin
next_state = SM_CMD_EN;
end else begin
next_state = state;
end
SM_DONE:
next_state = SM_IDLE;
default:
next_state = SM_IDLE;
endcase
end
// Assign outputs based on current state.
assign m_arvalid = (state == SM_CMD_EN);
assign next = m_arready && (state == SM_CMD_EN);
assign r_push = next;
assign a_push = (state == SM_IDLE);
assign s_arready = ((state == SM_CMD_EN) || (state == SM_DONE)) && (next_state == SM_IDLE);
endmodule
`default_nettype wire
|
// -*- verilog -*-
//
// USRP - Universal Software Radio Peripheral
//
// Copyright (C) 2003 Matt Ettus
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
//
// DDC block
module ddc(input clock,
input reset,
input enable,
input [3:0] rate1,
input [3:0] rate2,
output strobe,
input [31:0] freq,
input [15:0] i_in,
input [15:0] q_in,
output [15:0] i_out,
output [15:0] q_out
);
parameter bw = 16;
parameter zw = 16;
wire [15:0] i_cordic_out, q_cordic_out;
wire [31:0] phase;
wire strobe1, strobe2;
reg [3:0] strobe_ctr1,strobe_ctr2;
always @(posedge clock)
if(reset | ~enable)
strobe_ctr2 <= #1 4'd0;
else if(strobe2)
strobe_ctr2 <= #1 4'd0;
else
strobe_ctr2 <= #1 strobe_ctr2 + 4'd1;
always @(posedge clock)
if(reset | ~enable)
strobe_ctr1 <= #1 4'd0;
else if(strobe1)
strobe_ctr1 <= #1 4'd0;
else if(strobe2)
strobe_ctr1 <= #1 strobe_ctr1 + 4'd1;
assign strobe2 = enable & ( strobe_ctr2 == rate2 );
assign strobe1 = strobe2 & ( strobe_ctr1 == rate1 );
assign strobe = strobe1;
function [2:0] log_ceil;
input [3:0] val;
log_ceil = val[3] ? 3'd4 : val[2] ? 3'd3 : val[1] ? 3'd2 : 3'd1;
endfunction
wire [2:0] shift1 = log_ceil(rate1);
wire [2:0] shift2 = log_ceil(rate2);
cordic #(.bitwidth(bw),.zwidth(zw),.stages(16))
cordic(.clock(clock), .reset(reset), .enable(enable),
.xi(i_in), .yi(q_in), .zi(phase[31:32-zw]),
.xo(i_cordic_out), .yo(q_cordic_out), .zo() );
cic_decim_2stage #(.bw(bw),.N(4))
decim_i(.clock(clock),.reset(reset),.enable(enable),
.strobe1(1'b1),.strobe2(strobe2),.strobe3(strobe1),.shift1(shift2),.shift2(shift1),
.signal_in(i_cordic_out),.signal_out(i_out));
cic_decim_2stage #(.bw(bw),.N(4))
decim_q(.clock(clock),.reset(reset),.enable(enable),
.strobe1(1'b1),.strobe2(strobe2),.strobe3(strobe1),.shift1(shift2),.shift2(shift1),
.signal_in(q_cordic_out),.signal_out(q_out));
phase_acc #(.resolution(32))
nco (.clk(clock),.reset(reset),.enable(enable),
.freq(freq),.phase(phase));
endmodule
|
// -*- verilog -*-
//
// USRP - Universal Software Radio Peripheral
//
// Copyright (C) 2003 Matt Ettus
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
//
// DDC block
module ddc(input clock,
input reset,
input enable,
input [3:0] rate1,
input [3:0] rate2,
output strobe,
input [31:0] freq,
input [15:0] i_in,
input [15:0] q_in,
output [15:0] i_out,
output [15:0] q_out
);
parameter bw = 16;
parameter zw = 16;
wire [15:0] i_cordic_out, q_cordic_out;
wire [31:0] phase;
wire strobe1, strobe2;
reg [3:0] strobe_ctr1,strobe_ctr2;
always @(posedge clock)
if(reset | ~enable)
strobe_ctr2 <= #1 4'd0;
else if(strobe2)
strobe_ctr2 <= #1 4'd0;
else
strobe_ctr2 <= #1 strobe_ctr2 + 4'd1;
always @(posedge clock)
if(reset | ~enable)
strobe_ctr1 <= #1 4'd0;
else if(strobe1)
strobe_ctr1 <= #1 4'd0;
else if(strobe2)
strobe_ctr1 <= #1 strobe_ctr1 + 4'd1;
assign strobe2 = enable & ( strobe_ctr2 == rate2 );
assign strobe1 = strobe2 & ( strobe_ctr1 == rate1 );
assign strobe = strobe1;
function [2:0] log_ceil;
input [3:0] val;
log_ceil = val[3] ? 3'd4 : val[2] ? 3'd3 : val[1] ? 3'd2 : 3'd1;
endfunction
wire [2:0] shift1 = log_ceil(rate1);
wire [2:0] shift2 = log_ceil(rate2);
cordic #(.bitwidth(bw),.zwidth(zw),.stages(16))
cordic(.clock(clock), .reset(reset), .enable(enable),
.xi(i_in), .yi(q_in), .zi(phase[31:32-zw]),
.xo(i_cordic_out), .yo(q_cordic_out), .zo() );
cic_decim_2stage #(.bw(bw),.N(4))
decim_i(.clock(clock),.reset(reset),.enable(enable),
.strobe1(1'b1),.strobe2(strobe2),.strobe3(strobe1),.shift1(shift2),.shift2(shift1),
.signal_in(i_cordic_out),.signal_out(i_out));
cic_decim_2stage #(.bw(bw),.N(4))
decim_q(.clock(clock),.reset(reset),.enable(enable),
.strobe1(1'b1),.strobe2(strobe2),.strobe3(strobe1),.shift1(shift2),.shift2(shift1),
.signal_in(q_cordic_out),.signal_out(q_out));
phase_acc #(.resolution(32))
nco (.clk(clock),.reset(reset),.enable(enable),
.freq(freq),.phase(phase));
endmodule
|
// -*- verilog -*-
//
// USRP - Universal Software Radio Peripheral
//
// Copyright (C) 2003 Matt Ettus
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
//
// DDC block
module ddc(input clock,
input reset,
input enable,
input [3:0] rate1,
input [3:0] rate2,
output strobe,
input [31:0] freq,
input [15:0] i_in,
input [15:0] q_in,
output [15:0] i_out,
output [15:0] q_out
);
parameter bw = 16;
parameter zw = 16;
wire [15:0] i_cordic_out, q_cordic_out;
wire [31:0] phase;
wire strobe1, strobe2;
reg [3:0] strobe_ctr1,strobe_ctr2;
always @(posedge clock)
if(reset | ~enable)
strobe_ctr2 <= #1 4'd0;
else if(strobe2)
strobe_ctr2 <= #1 4'd0;
else
strobe_ctr2 <= #1 strobe_ctr2 + 4'd1;
always @(posedge clock)
if(reset | ~enable)
strobe_ctr1 <= #1 4'd0;
else if(strobe1)
strobe_ctr1 <= #1 4'd0;
else if(strobe2)
strobe_ctr1 <= #1 strobe_ctr1 + 4'd1;
assign strobe2 = enable & ( strobe_ctr2 == rate2 );
assign strobe1 = strobe2 & ( strobe_ctr1 == rate1 );
assign strobe = strobe1;
function [2:0] log_ceil;
input [3:0] val;
log_ceil = val[3] ? 3'd4 : val[2] ? 3'd3 : val[1] ? 3'd2 : 3'd1;
endfunction
wire [2:0] shift1 = log_ceil(rate1);
wire [2:0] shift2 = log_ceil(rate2);
cordic #(.bitwidth(bw),.zwidth(zw),.stages(16))
cordic(.clock(clock), .reset(reset), .enable(enable),
.xi(i_in), .yi(q_in), .zi(phase[31:32-zw]),
.xo(i_cordic_out), .yo(q_cordic_out), .zo() );
cic_decim_2stage #(.bw(bw),.N(4))
decim_i(.clock(clock),.reset(reset),.enable(enable),
.strobe1(1'b1),.strobe2(strobe2),.strobe3(strobe1),.shift1(shift2),.shift2(shift1),
.signal_in(i_cordic_out),.signal_out(i_out));
cic_decim_2stage #(.bw(bw),.N(4))
decim_q(.clock(clock),.reset(reset),.enable(enable),
.strobe1(1'b1),.strobe2(strobe2),.strobe3(strobe1),.shift1(shift2),.shift2(shift1),
.signal_in(q_cordic_out),.signal_out(q_out));
phase_acc #(.resolution(32))
nco (.clk(clock),.reset(reset),.enable(enable),
.freq(freq),.phase(phase));
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
// Copyright (C) 2008 Schuyler Eldridge, Boston University
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
module mux(opA,opB,sum,dsp_sel,out);
input [3:0] opA,opB;
input [4:0] sum;
input [1:0] dsp_sel;
output [3:0] out;
reg cout;
always @ (sum)
begin
if (sum[4] == 1)
cout <= 4'b0001;
else
cout <= 4'b0000;
end
reg out;
always @(dsp_sel,sum,cout,opB,opA)
begin
if (dsp_sel == 2'b00)
out <= sum[3:0];
else if (dsp_sel == 2'b01)
out <= cout;
else if (dsp_sel == 2'b10)
out <= opB;
else if (dsp_sel == 2'b11)
out <= opA;
end
endmodule
|
`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
// Company:
// Engineer:
//
// Create Date: 03/11/2016 02:09:05 PM
// Design Name:
// Module Name: Rotate_Mux_Array
// Project Name:
// Target Devices:
// Tool Versions:
// Description:
//
// Dependencies:
//
// Revision:
// Revision 0.01 - File Created
// Additional Comments:
//
//////////////////////////////////////////////////////////////////////////////////
module Rotate_Mux_Array
#(parameter SWR=26)
(
input wire [SWR-1:0] Data_i,
input wire select_i,
output wire [SWR-1:0] Data_o
);
genvar j;//Create a variable for the loop FOR
generate for (j=0; j <= SWR-1; j=j+1) begin // generate enough Multiplexers modules for each bit
case (j)
SWR-1-j:begin
assign Data_o[j]=Data_i[SWR-1-j];
end
default:begin
Multiplexer_AC #(.W(1)) rotate_mux(
.ctrl(select_i),
.D0 (Data_i[j]),
.D1 (Data_i[SWR-1-j]),
.S (Data_o[j])
);
end
endcase
end
endgenerate
endmodule
|
`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
// Company:
// Engineer:
//
// Create Date: 03/11/2016 02:09:05 PM
// Design Name:
// Module Name: Rotate_Mux_Array
// Project Name:
// Target Devices:
// Tool Versions:
// Description:
//
// Dependencies:
//
// Revision:
// Revision 0.01 - File Created
// Additional Comments:
//
//////////////////////////////////////////////////////////////////////////////////
module Rotate_Mux_Array
#(parameter SWR=26)
(
input wire [SWR-1:0] Data_i,
input wire select_i,
output wire [SWR-1:0] Data_o
);
genvar j;//Create a variable for the loop FOR
generate for (j=0; j <= SWR-1; j=j+1) begin // generate enough Multiplexers modules for each bit
case (j)
SWR-1-j:begin
assign Data_o[j]=Data_i[SWR-1-j];
end
default:begin
Multiplexer_AC #(.W(1)) rotate_mux(
.ctrl(select_i),
.D0 (Data_i[j]),
.D1 (Data_i[SWR-1-j]),
.S (Data_o[j])
);
end
endcase
end
endgenerate
endmodule
|
// -- (c) Copyright 2010 - 2011 Xilinx, Inc. All rights reserved.
// --
// -- This file contains confidential and proprietary information
// -- of Xilinx, Inc. and is protected under U.S. and
// -- international copyright and other intellectual property
// -- laws.
// --
// -- DISCLAIMER
// -- This disclaimer is not a license and does not grant any
// -- rights to the materials distributed herewith. Except as
// -- otherwise provided in a valid license issued to you by
// -- Xilinx, and to the maximum extent permitted by applicable
// -- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// -- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// -- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// -- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// -- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// -- (2) Xilinx shall not be liable (whether in contract or tort,
// -- including negligence, or under any other theory of
// -- liability) for any loss or damage of any kind or nature
// -- related to, arising under or in connection with these
// -- materials, including for any direct, or any indirect,
// -- special, incidental, or consequential loss or damage
// -- (including loss of data, profits, goodwill, or any type of
// -- loss or damage suffered as a result of any action brought
// -- by a third party) even if such damage or loss was
// -- reasonably foreseeable or Xilinx had been advised of the
// -- possibility of the same.
// --
// -- CRITICAL APPLICATIONS
// -- Xilinx products are not designed or intended to be fail-
// -- safe, or for use in any application requiring fail-safe
// -- performance, such as life-support or safety devices or
// -- systems, Class III medical devices, nuclear facilities,
// -- applications related to the deployment of airbags, or any
// -- other applications that could lead to death, personal
// -- injury, or severe property or environmental damage
// -- (individually and collectively, "Critical
// -- Applications"). Customer assumes the sole risk and
// -- liability of any use of Xilinx products in Critical
// -- Applications, subject only to applicable laws and
// -- regulations governing limitations on product liability.
// --
// -- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// -- PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
//
// Description: Address AXI3 Slave Converter
//
//
// Verilog-standard: Verilog 2001
//--------------------------------------------------------------------------
//
// Structure:
// a_axi3_conv
// axic_fifo
//
//--------------------------------------------------------------------------
`timescale 1ps/1ps
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_a_axi3_conv #
(
parameter C_FAMILY = "none",
parameter integer C_AXI_ID_WIDTH = 1,
parameter integer C_AXI_ADDR_WIDTH = 32,
parameter integer C_AXI_DATA_WIDTH = 32,
parameter integer C_AXI_SUPPORTS_USER_SIGNALS = 0,
parameter integer C_AXI_AUSER_WIDTH = 1,
parameter integer C_AXI_CHANNEL = 0,
// 0 = AXI AW Channel.
// 1 = AXI AR Channel.
parameter integer C_SUPPORT_SPLITTING = 1,
// Implement transaction splitting logic.
// Disabled whan all connected masters are AXI3 and have same or narrower data width.
parameter integer C_SUPPORT_BURSTS = 1,
// Disabled when all connected masters are AxiLite,
// allowing logic to be simplified.
parameter integer C_SINGLE_THREAD = 1
// 0 = Ignore ID when propagating transactions (assume all responses are in order).
// 1 = Enforce single-threading (one ID at a time) when any outstanding or
// requested transaction requires splitting.
// While no split is ongoing any new non-split transaction will pass immediately regardless
// off ID.
// A split transaction will stall if there are multiple ID (non-split) transactions
// ongoing, once it has been forwarded only transactions with the same ID is allowed
// (split or not) until all ongoing split transactios has been completed.
)
(
// System Signals
input wire ACLK,
input wire ARESET,
// Command Interface (W/R)
output wire cmd_valid,
output wire cmd_split,
output wire [C_AXI_ID_WIDTH-1:0] cmd_id,
output wire [4-1:0] cmd_length,
input wire cmd_ready,
// Command Interface (B)
output wire cmd_b_valid,
output wire cmd_b_split,
output wire [4-1:0] cmd_b_repeat,
input wire cmd_b_ready,
// Slave Interface Write Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_AID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_AADDR,
input wire [8-1:0] S_AXI_ALEN,
input wire [3-1:0] S_AXI_ASIZE,
input wire [2-1:0] S_AXI_ABURST,
input wire [1-1:0] S_AXI_ALOCK,
input wire [4-1:0] S_AXI_ACACHE,
input wire [3-1:0] S_AXI_APROT,
input wire [4-1:0] S_AXI_AQOS,
input wire [C_AXI_AUSER_WIDTH-1:0] S_AXI_AUSER,
input wire S_AXI_AVALID,
output wire S_AXI_AREADY,
// Master Interface Write Address Port
output wire [C_AXI_ID_WIDTH-1:0] M_AXI_AID,
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_AADDR,
output wire [4-1:0] M_AXI_ALEN,
output wire [3-1:0] M_AXI_ASIZE,
output wire [2-1:0] M_AXI_ABURST,
output wire [2-1:0] M_AXI_ALOCK,
output wire [4-1:0] M_AXI_ACACHE,
output wire [3-1:0] M_AXI_APROT,
output wire [4-1:0] M_AXI_AQOS,
output wire [C_AXI_AUSER_WIDTH-1:0] M_AXI_AUSER,
output wire M_AXI_AVALID,
input wire M_AXI_AREADY
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Constants for burst types.
localparam [2-1:0] C_FIX_BURST = 2'b00;
localparam [2-1:0] C_INCR_BURST = 2'b01;
localparam [2-1:0] C_WRAP_BURST = 2'b10;
// Depth for command FIFO.
localparam integer C_FIFO_DEPTH_LOG = 5;
// Constants used to generate size mask.
localparam [C_AXI_ADDR_WIDTH+8-1:0] C_SIZE_MASK = {{C_AXI_ADDR_WIDTH{1'b1}}, 8'b0000_0000};
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
// Access decoding related signals.
wire access_is_incr;
wire [4-1:0] num_transactions;
wire incr_need_to_split;
reg [C_AXI_ADDR_WIDTH-1:0] next_mi_addr;
reg split_ongoing;
reg [4-1:0] pushed_commands;
reg [16-1:0] addr_step;
reg [16-1:0] first_step;
wire [8-1:0] first_beats;
reg [C_AXI_ADDR_WIDTH-1:0] size_mask;
// Access decoding related signals for internal pipestage.
reg access_is_incr_q;
reg incr_need_to_split_q;
wire need_to_split_q;
reg [4-1:0] num_transactions_q;
reg [16-1:0] addr_step_q;
reg [16-1:0] first_step_q;
reg [C_AXI_ADDR_WIDTH-1:0] size_mask_q;
// Command buffer help signals.
reg [C_FIFO_DEPTH_LOG:0] cmd_depth;
reg cmd_empty;
reg [C_AXI_ID_WIDTH-1:0] queue_id;
wire id_match;
wire cmd_id_check;
wire s_ready;
wire cmd_full;
wire allow_this_cmd;
wire allow_new_cmd;
wire cmd_push;
reg cmd_push_block;
reg [C_FIFO_DEPTH_LOG:0] cmd_b_depth;
reg cmd_b_empty;
wire cmd_b_full;
wire cmd_b_push;
reg cmd_b_push_block;
wire pushed_new_cmd;
wire last_incr_split;
wire last_split;
wire first_split;
wire no_cmd;
wire allow_split_cmd;
wire almost_empty;
wire no_b_cmd;
wire allow_non_split_cmd;
wire almost_b_empty;
reg multiple_id_non_split;
reg split_in_progress;
// Internal Command Interface signals (W/R).
wire cmd_split_i;
wire [C_AXI_ID_WIDTH-1:0] cmd_id_i;
reg [4-1:0] cmd_length_i;
// Internal Command Interface signals (B).
wire cmd_b_split_i;
wire [4-1:0] cmd_b_repeat_i;
// Throttling help signals.
wire mi_stalling;
reg command_ongoing;
// Internal SI-side signals.
reg [C_AXI_ID_WIDTH-1:0] S_AXI_AID_Q;
reg [C_AXI_ADDR_WIDTH-1:0] S_AXI_AADDR_Q;
reg [8-1:0] S_AXI_ALEN_Q;
reg [3-1:0] S_AXI_ASIZE_Q;
reg [2-1:0] S_AXI_ABURST_Q;
reg [2-1:0] S_AXI_ALOCK_Q;
reg [4-1:0] S_AXI_ACACHE_Q;
reg [3-1:0] S_AXI_APROT_Q;
reg [4-1:0] S_AXI_AQOS_Q;
reg [C_AXI_AUSER_WIDTH-1:0] S_AXI_AUSER_Q;
reg S_AXI_AREADY_I;
// Internal MI-side signals.
wire [C_AXI_ID_WIDTH-1:0] M_AXI_AID_I;
reg [C_AXI_ADDR_WIDTH-1:0] M_AXI_AADDR_I;
reg [8-1:0] M_AXI_ALEN_I;
wire [3-1:0] M_AXI_ASIZE_I;
wire [2-1:0] M_AXI_ABURST_I;
reg [2-1:0] M_AXI_ALOCK_I;
wire [4-1:0] M_AXI_ACACHE_I;
wire [3-1:0] M_AXI_APROT_I;
wire [4-1:0] M_AXI_AQOS_I;
wire [C_AXI_AUSER_WIDTH-1:0] M_AXI_AUSER_I;
wire M_AXI_AVALID_I;
wire M_AXI_AREADY_I;
reg [1:0] areset_d; // Reset delay register
always @(posedge ACLK) begin
areset_d <= {areset_d[0], ARESET};
end
/////////////////////////////////////////////////////////////////////////////
// Capture SI-Side signals.
//
/////////////////////////////////////////////////////////////////////////////
// Register SI-Side signals.
always @ (posedge ACLK) begin
if ( ARESET ) begin
S_AXI_AID_Q <= {C_AXI_ID_WIDTH{1'b0}};
S_AXI_AADDR_Q <= {C_AXI_ADDR_WIDTH{1'b0}};
S_AXI_ALEN_Q <= 8'b0;
S_AXI_ASIZE_Q <= 3'b0;
S_AXI_ABURST_Q <= 2'b0;
S_AXI_ALOCK_Q <= 2'b0;
S_AXI_ACACHE_Q <= 4'b0;
S_AXI_APROT_Q <= 3'b0;
S_AXI_AQOS_Q <= 4'b0;
S_AXI_AUSER_Q <= {C_AXI_AUSER_WIDTH{1'b0}};
end else begin
if ( S_AXI_AREADY_I ) begin
S_AXI_AID_Q <= S_AXI_AID;
S_AXI_AADDR_Q <= S_AXI_AADDR;
S_AXI_ALEN_Q <= S_AXI_ALEN;
S_AXI_ASIZE_Q <= S_AXI_ASIZE;
S_AXI_ABURST_Q <= S_AXI_ABURST;
S_AXI_ALOCK_Q <= S_AXI_ALOCK;
S_AXI_ACACHE_Q <= S_AXI_ACACHE;
S_AXI_APROT_Q <= S_AXI_APROT;
S_AXI_AQOS_Q <= S_AXI_AQOS;
S_AXI_AUSER_Q <= S_AXI_AUSER;
end
end
end
/////////////////////////////////////////////////////////////////////////////
// Decode the Incoming Transaction.
//
// Extract transaction type and the number of splits that may be needed.
//
// Calculate the step size so that the address for each part of a split can
// can be calculated.
//
/////////////////////////////////////////////////////////////////////////////
// Transaction burst type.
assign access_is_incr = ( S_AXI_ABURST == C_INCR_BURST );
// Get number of transactions for split INCR.
assign num_transactions = S_AXI_ALEN[4 +: 4];
assign first_beats = {3'b0, S_AXI_ALEN[0 +: 4]} + 7'b01;
// Generate address increment of first split transaction.
always @ *
begin
case (S_AXI_ASIZE)
3'b000: first_step = first_beats << 0;
3'b001: first_step = first_beats << 1;
3'b010: first_step = first_beats << 2;
3'b011: first_step = first_beats << 3;
3'b100: first_step = first_beats << 4;
3'b101: first_step = first_beats << 5;
3'b110: first_step = first_beats << 6;
3'b111: first_step = first_beats << 7;
endcase
end
// Generate address increment for remaining split transactions.
always @ *
begin
case (S_AXI_ASIZE)
3'b000: addr_step = 16'h0010;
3'b001: addr_step = 16'h0020;
3'b010: addr_step = 16'h0040;
3'b011: addr_step = 16'h0080;
3'b100: addr_step = 16'h0100;
3'b101: addr_step = 16'h0200;
3'b110: addr_step = 16'h0400;
3'b111: addr_step = 16'h0800;
endcase
end
// Generate address mask bits to remove split transaction unalignment.
always @ *
begin
case (S_AXI_ASIZE)
3'b000: size_mask = C_SIZE_MASK[8 +: C_AXI_ADDR_WIDTH];
3'b001: size_mask = C_SIZE_MASK[7 +: C_AXI_ADDR_WIDTH];
3'b010: size_mask = C_SIZE_MASK[6 +: C_AXI_ADDR_WIDTH];
3'b011: size_mask = C_SIZE_MASK[5 +: C_AXI_ADDR_WIDTH];
3'b100: size_mask = C_SIZE_MASK[4 +: C_AXI_ADDR_WIDTH];
3'b101: size_mask = C_SIZE_MASK[3 +: C_AXI_ADDR_WIDTH];
3'b110: size_mask = C_SIZE_MASK[2 +: C_AXI_ADDR_WIDTH];
3'b111: size_mask = C_SIZE_MASK[1 +: C_AXI_ADDR_WIDTH];
endcase
end
/////////////////////////////////////////////////////////////////////////////
// Transfer SI-Side signals to internal Pipeline Stage.
//
/////////////////////////////////////////////////////////////////////////////
always @ (posedge ACLK) begin
if ( ARESET ) begin
access_is_incr_q <= 1'b0;
incr_need_to_split_q <= 1'b0;
num_transactions_q <= 4'b0;
addr_step_q <= 16'b0;
first_step_q <= 16'b0;
size_mask_q <= {C_AXI_ADDR_WIDTH{1'b0}};
end else begin
if ( S_AXI_AREADY_I ) begin
access_is_incr_q <= access_is_incr;
incr_need_to_split_q <= incr_need_to_split;
num_transactions_q <= num_transactions;
addr_step_q <= addr_step;
first_step_q <= first_step;
size_mask_q <= size_mask;
end
end
end
/////////////////////////////////////////////////////////////////////////////
// Generate Command Information.
//
// Detect if current transation needs to be split, and keep track of all
// the generated split transactions.
//
//
/////////////////////////////////////////////////////////////////////////////
// Detect when INCR must be split.
assign incr_need_to_split = access_is_incr & ( num_transactions != 0 ) &
( C_SUPPORT_SPLITTING == 1 ) &
( C_SUPPORT_BURSTS == 1 );
// Detect when a command has to be split.
assign need_to_split_q = incr_need_to_split_q;
// Handle progress of split transactions.
always @ (posedge ACLK) begin
if ( ARESET ) begin
split_ongoing <= 1'b0;
end else begin
if ( pushed_new_cmd ) begin
split_ongoing <= need_to_split_q & ~last_split;
end
end
end
// Keep track of number of transactions generated.
always @ (posedge ACLK) begin
if ( ARESET ) begin
pushed_commands <= 4'b0;
end else begin
if ( S_AXI_AREADY_I ) begin
pushed_commands <= 4'b0;
end else if ( pushed_new_cmd ) begin
pushed_commands <= pushed_commands + 4'b1;
end
end
end
// Detect last part of a command, split or not.
assign last_incr_split = access_is_incr_q & ( num_transactions_q == pushed_commands );
assign last_split = last_incr_split | ~access_is_incr_q |
( C_SUPPORT_SPLITTING == 0 ) |
( C_SUPPORT_BURSTS == 0 );
assign first_split = (pushed_commands == 4'b0);
// Calculate base for next address.
always @ (posedge ACLK) begin
if ( ARESET ) begin
next_mi_addr = {C_AXI_ADDR_WIDTH{1'b0}};
end else if ( pushed_new_cmd ) begin
next_mi_addr = M_AXI_AADDR_I + (first_split ? first_step_q : addr_step_q);
end
end
/////////////////////////////////////////////////////////////////////////////
// Translating Transaction.
//
// Set Split transaction information on all part except last for a transaction
// that needs splitting.
// The B Channel will only get one command for a Split transaction and in
// the Split bflag will be set in that case.
//
// The AWID is extracted and applied to all commands generated for the current
// incomming SI-Side transaction.
//
// The address is increased for each part of a Split transaction, the amount
// depends on the siSIZE for the transaction.
//
// The length has to be changed for Split transactions. All part except tha
// last one will have 0xF, the last one uses the 4 lsb bits from the SI-side
// transaction as length.
//
// Non-Split has untouched address and length information.
//
// Exclusive access are diasabled for a Split transaction because it is not
// possible to guarantee concistency between all the parts.
//
/////////////////////////////////////////////////////////////////////////////
// Assign Split signals.
assign cmd_split_i = need_to_split_q & ~last_split;
assign cmd_b_split_i = need_to_split_q & ~last_split;
// Copy AW ID to W.
assign cmd_id_i = S_AXI_AID_Q;
// Set B Responses to merge.
assign cmd_b_repeat_i = num_transactions_q;
// Select new size or remaining size.
always @ *
begin
if ( split_ongoing & access_is_incr_q ) begin
M_AXI_AADDR_I = next_mi_addr & size_mask_q;
end else begin
M_AXI_AADDR_I = S_AXI_AADDR_Q;
end
end
// Generate the base length for each transaction.
always @ *
begin
if ( first_split | ~need_to_split_q ) begin
M_AXI_ALEN_I = S_AXI_ALEN_Q[0 +: 4];
cmd_length_i = S_AXI_ALEN_Q[0 +: 4];
end else begin
M_AXI_ALEN_I = 4'hF;
cmd_length_i = 4'hF;
end
end
// Kill Exclusive for Split transactions.
always @ *
begin
if ( need_to_split_q ) begin
M_AXI_ALOCK_I = 2'b00;
end else begin
M_AXI_ALOCK_I = {1'b0, S_AXI_ALOCK_Q};
end
end
/////////////////////////////////////////////////////////////////////////////
// Forward the command to the MI-side interface.
//
// It is determined that this is an allowed command/access when there is
// room in the command queue (and it passes ID and Split checks as required).
//
/////////////////////////////////////////////////////////////////////////////
// Move SI-side transaction to internal pipe stage.
always @ (posedge ACLK) begin
if (ARESET) begin
command_ongoing <= 1'b0;
S_AXI_AREADY_I <= 1'b0;
end else begin
if (areset_d == 2'b10) begin
S_AXI_AREADY_I <= 1'b1;
end else begin
if ( S_AXI_AVALID & S_AXI_AREADY_I ) begin
command_ongoing <= 1'b1;
S_AXI_AREADY_I <= 1'b0;
end else if ( pushed_new_cmd & last_split ) begin
command_ongoing <= 1'b0;
S_AXI_AREADY_I <= 1'b1;
end
end
end
end
// Generate ready signal.
assign S_AXI_AREADY = S_AXI_AREADY_I;
// Only allowed to forward translated command when command queue is ok with it.
assign M_AXI_AVALID_I = allow_new_cmd & command_ongoing;
// Detect when MI-side is stalling.
assign mi_stalling = M_AXI_AVALID_I & ~M_AXI_AREADY_I;
/////////////////////////////////////////////////////////////////////////////
// Simple transfer of paramters that doesn't need to be adjusted.
//
// ID - Transaction still recognized with the same ID.
// CACHE - No need to change the chache features. Even if the modyfiable
// bit is overridden (forcefully) there is no need to let downstream
// component beleive it is ok to modify it further.
// PROT - Security level of access is not changed when upsizing.
// QOS - Quality of Service is static 0.
// USER - User bits remains the same.
//
/////////////////////////////////////////////////////////////////////////////
assign M_AXI_AID_I = S_AXI_AID_Q;
assign M_AXI_ASIZE_I = S_AXI_ASIZE_Q;
assign M_AXI_ABURST_I = S_AXI_ABURST_Q;
assign M_AXI_ACACHE_I = S_AXI_ACACHE_Q;
assign M_AXI_APROT_I = S_AXI_APROT_Q;
assign M_AXI_AQOS_I = S_AXI_AQOS_Q;
assign M_AXI_AUSER_I = ( C_AXI_SUPPORTS_USER_SIGNALS ) ? S_AXI_AUSER_Q : {C_AXI_AUSER_WIDTH{1'b0}};
/////////////////////////////////////////////////////////////////////////////
// Control command queue to W/R channel.
//
// Commands can be pushed into the Cmd FIFO even if MI-side is stalling.
// A flag is set if MI-side is stalling when Command is pushed to the
// Cmd FIFO. This will prevent multiple push of the same Command as well as
// keeping the MI-side Valid signal if the Allow Cmd requirement has been
// updated to disable furter Commands (I.e. it is made sure that the SI-side
// Command has been forwarded to both Cmd FIFO and MI-side).
//
// It is allowed to continue pushing new commands as long as
// * There is room in the queue(s)
// * The ID is the same as previously queued. Since data is not reordered
// for the same ID it is always OK to let them proceed.
// Or, if no split transaction is ongoing any ID can be allowed.
//
/////////////////////////////////////////////////////////////////////////////
// Keep track of current ID in queue.
always @ (posedge ACLK) begin
if (ARESET) begin
queue_id <= {C_AXI_ID_WIDTH{1'b0}};
multiple_id_non_split <= 1'b0;
split_in_progress <= 1'b0;
end else begin
if ( cmd_push ) begin
// Store ID (it will be matching ID or a "new beginning").
queue_id <= S_AXI_AID_Q;
end
if ( no_cmd & no_b_cmd ) begin
multiple_id_non_split <= 1'b0;
end else if ( cmd_push & allow_non_split_cmd & ~id_match ) begin
multiple_id_non_split <= 1'b1;
end
if ( no_cmd & no_b_cmd ) begin
split_in_progress <= 1'b0;
end else if ( cmd_push & allow_split_cmd ) begin
split_in_progress <= 1'b1;
end
end
end
// Determine if the command FIFOs are empty.
assign no_cmd = almost_empty & cmd_ready | cmd_empty;
assign no_b_cmd = almost_b_empty & cmd_b_ready | cmd_b_empty;
// Check ID to make sure this command is allowed.
assign id_match = ( C_SINGLE_THREAD == 0 ) | ( queue_id == S_AXI_AID_Q);
assign cmd_id_check = (cmd_empty & cmd_b_empty) | ( id_match & (~cmd_empty | ~cmd_b_empty) );
// Command type affects possibility to push immediately or wait.
assign allow_split_cmd = need_to_split_q & cmd_id_check & ~multiple_id_non_split;
assign allow_non_split_cmd = ~need_to_split_q & (cmd_id_check | ~split_in_progress);
assign allow_this_cmd = allow_split_cmd | allow_non_split_cmd | ( C_SINGLE_THREAD == 0 );
// Check if it is allowed to push more commands.
assign allow_new_cmd = (~cmd_full & ~cmd_b_full & allow_this_cmd) |
cmd_push_block;
// Push new command when allowed and MI-side is able to receive the command.
assign cmd_push = M_AXI_AVALID_I & ~cmd_push_block;
assign cmd_b_push = M_AXI_AVALID_I & ~cmd_b_push_block & (C_AXI_CHANNEL == 0);
// Block furter push until command has been forwarded to MI-side.
always @ (posedge ACLK) begin
if (ARESET) begin
cmd_push_block <= 1'b0;
end else begin
if ( pushed_new_cmd ) begin
cmd_push_block <= 1'b0;
end else if ( cmd_push & mi_stalling ) begin
cmd_push_block <= 1'b1;
end
end
end
// Block furter push until command has been forwarded to MI-side.
always @ (posedge ACLK) begin
if (ARESET) begin
cmd_b_push_block <= 1'b0;
end else begin
if ( S_AXI_AREADY_I ) begin
cmd_b_push_block <= 1'b0;
end else if ( cmd_b_push ) begin
cmd_b_push_block <= 1'b1;
end
end
end
// Acknowledge command when we can push it into queue (and forward it).
assign pushed_new_cmd = M_AXI_AVALID_I & M_AXI_AREADY_I;
/////////////////////////////////////////////////////////////////////////////
// Command Queue (W/R):
//
// Instantiate a FIFO as the queue and adjust the control signals.
//
// The features from Command FIFO can be reduced depending on configuration:
// Read Channel only need the split information.
// Write Channel always require ID information. When bursts are supported
// Split and Length information is also used.
//
/////////////////////////////////////////////////////////////////////////////
// Instantiated queue.
generate
if ( C_AXI_CHANNEL == 1 && C_SUPPORT_SPLITTING == 1 && C_SUPPORT_BURSTS == 1 ) begin : USE_R_CHANNEL
axi_data_fifo_v2_1_axic_fifo #
(
.C_FAMILY(C_FAMILY),
.C_FIFO_DEPTH_LOG(C_FIFO_DEPTH_LOG),
.C_FIFO_WIDTH(1),
.C_FIFO_TYPE("lut")
)
cmd_queue
(
.ACLK(ACLK),
.ARESET(ARESET),
.S_MESG({cmd_split_i}),
.S_VALID(cmd_push),
.S_READY(s_ready),
.M_MESG({cmd_split}),
.M_VALID(cmd_valid),
.M_READY(cmd_ready)
);
assign cmd_id = {C_AXI_ID_WIDTH{1'b0}};
assign cmd_length = 4'b0;
end else if (C_SUPPORT_BURSTS == 1) begin : USE_BURSTS
axi_data_fifo_v2_1_axic_fifo #
(
.C_FAMILY(C_FAMILY),
.C_FIFO_DEPTH_LOG(C_FIFO_DEPTH_LOG),
.C_FIFO_WIDTH(C_AXI_ID_WIDTH+4),
.C_FIFO_TYPE("lut")
)
cmd_queue
(
.ACLK(ACLK),
.ARESET(ARESET),
.S_MESG({cmd_id_i, cmd_length_i}),
.S_VALID(cmd_push),
.S_READY(s_ready),
.M_MESG({cmd_id, cmd_length}),
.M_VALID(cmd_valid),
.M_READY(cmd_ready)
);
assign cmd_split = 1'b0;
end else begin : NO_BURSTS
axi_data_fifo_v2_1_axic_fifo #
(
.C_FAMILY(C_FAMILY),
.C_FIFO_DEPTH_LOG(C_FIFO_DEPTH_LOG),
.C_FIFO_WIDTH(C_AXI_ID_WIDTH),
.C_FIFO_TYPE("lut")
)
cmd_queue
(
.ACLK(ACLK),
.ARESET(ARESET),
.S_MESG({cmd_id_i}),
.S_VALID(cmd_push),
.S_READY(s_ready),
.M_MESG({cmd_id}),
.M_VALID(cmd_valid),
.M_READY(cmd_ready)
);
assign cmd_split = 1'b0;
assign cmd_length = 4'b0;
end
endgenerate
// Queue is concidered full when not ready.
assign cmd_full = ~s_ready;
// Queue is empty when no data at output port.
always @ (posedge ACLK) begin
if (ARESET) begin
cmd_empty <= 1'b1;
cmd_depth <= {C_FIFO_DEPTH_LOG+1{1'b0}};
end else begin
if ( cmd_push & ~cmd_ready ) begin
// Push only => Increase depth.
cmd_depth <= cmd_depth + 1'b1;
cmd_empty <= 1'b0;
end else if ( ~cmd_push & cmd_ready ) begin
// Pop only => Decrease depth.
cmd_depth <= cmd_depth - 1'b1;
cmd_empty <= almost_empty;
end
end
end
assign almost_empty = ( cmd_depth == 1 );
/////////////////////////////////////////////////////////////////////////////
// Command Queue (B):
//
// Add command queue for B channel only when it is AW channel and both burst
// and splitting is supported.
//
// When turned off the command appears always empty.
//
/////////////////////////////////////////////////////////////////////////////
// Instantiated queue.
generate
if ( C_AXI_CHANNEL == 0 && C_SUPPORT_SPLITTING == 1 && C_SUPPORT_BURSTS == 1 ) begin : USE_B_CHANNEL
wire cmd_b_valid_i;
wire s_b_ready;
axi_data_fifo_v2_1_axic_fifo #
(
.C_FAMILY(C_FAMILY),
.C_FIFO_DEPTH_LOG(C_FIFO_DEPTH_LOG),
.C_FIFO_WIDTH(1+4),
.C_FIFO_TYPE("lut")
)
cmd_b_queue
(
.ACLK(ACLK),
.ARESET(ARESET),
.S_MESG({cmd_b_split_i, cmd_b_repeat_i}),
.S_VALID(cmd_b_push),
.S_READY(s_b_ready),
.M_MESG({cmd_b_split, cmd_b_repeat}),
.M_VALID(cmd_b_valid_i),
.M_READY(cmd_b_ready)
);
// Queue is concidered full when not ready.
assign cmd_b_full = ~s_b_ready;
// Queue is empty when no data at output port.
always @ (posedge ACLK) begin
if (ARESET) begin
cmd_b_empty <= 1'b1;
cmd_b_depth <= {C_FIFO_DEPTH_LOG+1{1'b0}};
end else begin
if ( cmd_b_push & ~cmd_b_ready ) begin
// Push only => Increase depth.
cmd_b_depth <= cmd_b_depth + 1'b1;
cmd_b_empty <= 1'b0;
end else if ( ~cmd_b_push & cmd_b_ready ) begin
// Pop only => Decrease depth.
cmd_b_depth <= cmd_b_depth - 1'b1;
cmd_b_empty <= ( cmd_b_depth == 1 );
end
end
end
assign almost_b_empty = ( cmd_b_depth == 1 );
// Assign external signal.
assign cmd_b_valid = cmd_b_valid_i;
end else begin : NO_B_CHANNEL
// Assign external command signals.
assign cmd_b_valid = 1'b0;
assign cmd_b_split = 1'b0;
assign cmd_b_repeat = 4'b0;
// Assign internal command FIFO signals.
assign cmd_b_full = 1'b0;
assign almost_b_empty = 1'b0;
always @ (posedge ACLK) begin
if (ARESET) begin
cmd_b_empty <= 1'b1;
cmd_b_depth <= {C_FIFO_DEPTH_LOG+1{1'b0}};
end else begin
// Constant FF due to ModelSim behavior.
cmd_b_empty <= 1'b1;
cmd_b_depth <= {C_FIFO_DEPTH_LOG+1{1'b0}};
end
end
end
endgenerate
/////////////////////////////////////////////////////////////////////////////
// MI-side output handling
//
/////////////////////////////////////////////////////////////////////////////
assign M_AXI_AID = M_AXI_AID_I;
assign M_AXI_AADDR = M_AXI_AADDR_I;
assign M_AXI_ALEN = M_AXI_ALEN_I;
assign M_AXI_ASIZE = M_AXI_ASIZE_I;
assign M_AXI_ABURST = M_AXI_ABURST_I;
assign M_AXI_ALOCK = M_AXI_ALOCK_I;
assign M_AXI_ACACHE = M_AXI_ACACHE_I;
assign M_AXI_APROT = M_AXI_APROT_I;
assign M_AXI_AQOS = M_AXI_AQOS_I;
assign M_AXI_AUSER = M_AXI_AUSER_I;
assign M_AXI_AVALID = M_AXI_AVALID_I;
assign M_AXI_AREADY_I = M_AXI_AREADY;
endmodule
|
// -- (c) Copyright 2010 - 2011 Xilinx, Inc. All rights reserved.
// --
// -- This file contains confidential and proprietary information
// -- of Xilinx, Inc. and is protected under U.S. and
// -- international copyright and other intellectual property
// -- laws.
// --
// -- DISCLAIMER
// -- This disclaimer is not a license and does not grant any
// -- rights to the materials distributed herewith. Except as
// -- otherwise provided in a valid license issued to you by
// -- Xilinx, and to the maximum extent permitted by applicable
// -- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
// -- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
// -- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
// -- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
// -- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
// -- (2) Xilinx shall not be liable (whether in contract or tort,
// -- including negligence, or under any other theory of
// -- liability) for any loss or damage of any kind or nature
// -- related to, arising under or in connection with these
// -- materials, including for any direct, or any indirect,
// -- special, incidental, or consequential loss or damage
// -- (including loss of data, profits, goodwill, or any type of
// -- loss or damage suffered as a result of any action brought
// -- by a third party) even if such damage or loss was
// -- reasonably foreseeable or Xilinx had been advised of the
// -- possibility of the same.
// --
// -- CRITICAL APPLICATIONS
// -- Xilinx products are not designed or intended to be fail-
// -- safe, or for use in any application requiring fail-safe
// -- performance, such as life-support or safety devices or
// -- systems, Class III medical devices, nuclear facilities,
// -- applications related to the deployment of airbags, or any
// -- other applications that could lead to death, personal
// -- injury, or severe property or environmental damage
// -- (individually and collectively, "Critical
// -- Applications"). Customer assumes the sole risk and
// -- liability of any use of Xilinx products in Critical
// -- Applications, subject only to applicable laws and
// -- regulations governing limitations on product liability.
// --
// -- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
// -- PART OF THIS FILE AT ALL TIMES.
//-----------------------------------------------------------------------------
//
// Description: Address AXI3 Slave Converter
//
//
// Verilog-standard: Verilog 2001
//--------------------------------------------------------------------------
//
// Structure:
// a_axi3_conv
// axic_fifo
//
//--------------------------------------------------------------------------
`timescale 1ps/1ps
(* DowngradeIPIdentifiedWarnings="yes" *)
module axi_protocol_converter_v2_1_a_axi3_conv #
(
parameter C_FAMILY = "none",
parameter integer C_AXI_ID_WIDTH = 1,
parameter integer C_AXI_ADDR_WIDTH = 32,
parameter integer C_AXI_DATA_WIDTH = 32,
parameter integer C_AXI_SUPPORTS_USER_SIGNALS = 0,
parameter integer C_AXI_AUSER_WIDTH = 1,
parameter integer C_AXI_CHANNEL = 0,
// 0 = AXI AW Channel.
// 1 = AXI AR Channel.
parameter integer C_SUPPORT_SPLITTING = 1,
// Implement transaction splitting logic.
// Disabled whan all connected masters are AXI3 and have same or narrower data width.
parameter integer C_SUPPORT_BURSTS = 1,
// Disabled when all connected masters are AxiLite,
// allowing logic to be simplified.
parameter integer C_SINGLE_THREAD = 1
// 0 = Ignore ID when propagating transactions (assume all responses are in order).
// 1 = Enforce single-threading (one ID at a time) when any outstanding or
// requested transaction requires splitting.
// While no split is ongoing any new non-split transaction will pass immediately regardless
// off ID.
// A split transaction will stall if there are multiple ID (non-split) transactions
// ongoing, once it has been forwarded only transactions with the same ID is allowed
// (split or not) until all ongoing split transactios has been completed.
)
(
// System Signals
input wire ACLK,
input wire ARESET,
// Command Interface (W/R)
output wire cmd_valid,
output wire cmd_split,
output wire [C_AXI_ID_WIDTH-1:0] cmd_id,
output wire [4-1:0] cmd_length,
input wire cmd_ready,
// Command Interface (B)
output wire cmd_b_valid,
output wire cmd_b_split,
output wire [4-1:0] cmd_b_repeat,
input wire cmd_b_ready,
// Slave Interface Write Address Ports
input wire [C_AXI_ID_WIDTH-1:0] S_AXI_AID,
input wire [C_AXI_ADDR_WIDTH-1:0] S_AXI_AADDR,
input wire [8-1:0] S_AXI_ALEN,
input wire [3-1:0] S_AXI_ASIZE,
input wire [2-1:0] S_AXI_ABURST,
input wire [1-1:0] S_AXI_ALOCK,
input wire [4-1:0] S_AXI_ACACHE,
input wire [3-1:0] S_AXI_APROT,
input wire [4-1:0] S_AXI_AQOS,
input wire [C_AXI_AUSER_WIDTH-1:0] S_AXI_AUSER,
input wire S_AXI_AVALID,
output wire S_AXI_AREADY,
// Master Interface Write Address Port
output wire [C_AXI_ID_WIDTH-1:0] M_AXI_AID,
output wire [C_AXI_ADDR_WIDTH-1:0] M_AXI_AADDR,
output wire [4-1:0] M_AXI_ALEN,
output wire [3-1:0] M_AXI_ASIZE,
output wire [2-1:0] M_AXI_ABURST,
output wire [2-1:0] M_AXI_ALOCK,
output wire [4-1:0] M_AXI_ACACHE,
output wire [3-1:0] M_AXI_APROT,
output wire [4-1:0] M_AXI_AQOS,
output wire [C_AXI_AUSER_WIDTH-1:0] M_AXI_AUSER,
output wire M_AXI_AVALID,
input wire M_AXI_AREADY
);
/////////////////////////////////////////////////////////////////////////////
// Variables for generating parameter controlled instances.
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Local params
/////////////////////////////////////////////////////////////////////////////
// Constants for burst types.
localparam [2-1:0] C_FIX_BURST = 2'b00;
localparam [2-1:0] C_INCR_BURST = 2'b01;
localparam [2-1:0] C_WRAP_BURST = 2'b10;
// Depth for command FIFO.
localparam integer C_FIFO_DEPTH_LOG = 5;
// Constants used to generate size mask.
localparam [C_AXI_ADDR_WIDTH+8-1:0] C_SIZE_MASK = {{C_AXI_ADDR_WIDTH{1'b1}}, 8'b0000_0000};
/////////////////////////////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Internal signals
/////////////////////////////////////////////////////////////////////////////
// Access decoding related signals.
wire access_is_incr;
wire [4-1:0] num_transactions;
wire incr_need_to_split;
reg [C_AXI_ADDR_WIDTH-1:0] next_mi_addr;
reg split_ongoing;
reg [4-1:0] pushed_commands;
reg [16-1:0] addr_step;
reg [16-1:0] first_step;
wire [8-1:0] first_beats;
reg [C_AXI_ADDR_WIDTH-1:0] size_mask;
// Access decoding related signals for internal pipestage.
reg access_is_incr_q;
reg incr_need_to_split_q;
wire need_to_split_q;
reg [4-1:0] num_transactions_q;
reg [16-1:0] addr_step_q;
reg [16-1:0] first_step_q;
reg [C_AXI_ADDR_WIDTH-1:0] size_mask_q;
// Command buffer help signals.
reg [C_FIFO_DEPTH_LOG:0] cmd_depth;
reg cmd_empty;
reg [C_AXI_ID_WIDTH-1:0] queue_id;
wire id_match;
wire cmd_id_check;
wire s_ready;
wire cmd_full;
wire allow_this_cmd;
wire allow_new_cmd;
wire cmd_push;
reg cmd_push_block;
reg [C_FIFO_DEPTH_LOG:0] cmd_b_depth;
reg cmd_b_empty;
wire cmd_b_full;
wire cmd_b_push;
reg cmd_b_push_block;
wire pushed_new_cmd;
wire last_incr_split;
wire last_split;
wire first_split;
wire no_cmd;
wire allow_split_cmd;
wire almost_empty;
wire no_b_cmd;
wire allow_non_split_cmd;
wire almost_b_empty;
reg multiple_id_non_split;
reg split_in_progress;
// Internal Command Interface signals (W/R).
wire cmd_split_i;
wire [C_AXI_ID_WIDTH-1:0] cmd_id_i;
reg [4-1:0] cmd_length_i;
// Internal Command Interface signals (B).
wire cmd_b_split_i;
wire [4-1:0] cmd_b_repeat_i;
// Throttling help signals.
wire mi_stalling;
reg command_ongoing;
// Internal SI-side signals.
reg [C_AXI_ID_WIDTH-1:0] S_AXI_AID_Q;
reg [C_AXI_ADDR_WIDTH-1:0] S_AXI_AADDR_Q;
reg [8-1:0] S_AXI_ALEN_Q;
reg [3-1:0] S_AXI_ASIZE_Q;
reg [2-1:0] S_AXI_ABURST_Q;
reg [2-1:0] S_AXI_ALOCK_Q;
reg [4-1:0] S_AXI_ACACHE_Q;
reg [3-1:0] S_AXI_APROT_Q;
reg [4-1:0] S_AXI_AQOS_Q;
reg [C_AXI_AUSER_WIDTH-1:0] S_AXI_AUSER_Q;
reg S_AXI_AREADY_I;
// Internal MI-side signals.
wire [C_AXI_ID_WIDTH-1:0] M_AXI_AID_I;
reg [C_AXI_ADDR_WIDTH-1:0] M_AXI_AADDR_I;
reg [8-1:0] M_AXI_ALEN_I;
wire [3-1:0] M_AXI_ASIZE_I;
wire [2-1:0] M_AXI_ABURST_I;
reg [2-1:0] M_AXI_ALOCK_I;
wire [4-1:0] M_AXI_ACACHE_I;
wire [3-1:0] M_AXI_APROT_I;
wire [4-1:0] M_AXI_AQOS_I;
wire [C_AXI_AUSER_WIDTH-1:0] M_AXI_AUSER_I;
wire M_AXI_AVALID_I;
wire M_AXI_AREADY_I;
reg [1:0] areset_d; // Reset delay register
always @(posedge ACLK) begin
areset_d <= {areset_d[0], ARESET};
end
/////////////////////////////////////////////////////////////////////////////
// Capture SI-Side signals.
//
/////////////////////////////////////////////////////////////////////////////
// Register SI-Side signals.
always @ (posedge ACLK) begin
if ( ARESET ) begin
S_AXI_AID_Q <= {C_AXI_ID_WIDTH{1'b0}};
S_AXI_AADDR_Q <= {C_AXI_ADDR_WIDTH{1'b0}};
S_AXI_ALEN_Q <= 8'b0;
S_AXI_ASIZE_Q <= 3'b0;
S_AXI_ABURST_Q <= 2'b0;
S_AXI_ALOCK_Q <= 2'b0;
S_AXI_ACACHE_Q <= 4'b0;
S_AXI_APROT_Q <= 3'b0;
S_AXI_AQOS_Q <= 4'b0;
S_AXI_AUSER_Q <= {C_AXI_AUSER_WIDTH{1'b0}};
end else begin
if ( S_AXI_AREADY_I ) begin
S_AXI_AID_Q <= S_AXI_AID;
S_AXI_AADDR_Q <= S_AXI_AADDR;
S_AXI_ALEN_Q <= S_AXI_ALEN;
S_AXI_ASIZE_Q <= S_AXI_ASIZE;
S_AXI_ABURST_Q <= S_AXI_ABURST;
S_AXI_ALOCK_Q <= S_AXI_ALOCK;
S_AXI_ACACHE_Q <= S_AXI_ACACHE;
S_AXI_APROT_Q <= S_AXI_APROT;
S_AXI_AQOS_Q <= S_AXI_AQOS;
S_AXI_AUSER_Q <= S_AXI_AUSER;
end
end
end
/////////////////////////////////////////////////////////////////////////////
// Decode the Incoming Transaction.
//
// Extract transaction type and the number of splits that may be needed.
//
// Calculate the step size so that the address for each part of a split can
// can be calculated.
//
/////////////////////////////////////////////////////////////////////////////
// Transaction burst type.
assign access_is_incr = ( S_AXI_ABURST == C_INCR_BURST );
// Get number of transactions for split INCR.
assign num_transactions = S_AXI_ALEN[4 +: 4];
assign first_beats = {3'b0, S_AXI_ALEN[0 +: 4]} + 7'b01;
// Generate address increment of first split transaction.
always @ *
begin
case (S_AXI_ASIZE)
3'b000: first_step = first_beats << 0;
3'b001: first_step = first_beats << 1;
3'b010: first_step = first_beats << 2;
3'b011: first_step = first_beats << 3;
3'b100: first_step = first_beats << 4;
3'b101: first_step = first_beats << 5;
3'b110: first_step = first_beats << 6;
3'b111: first_step = first_beats << 7;
endcase
end
// Generate address increment for remaining split transactions.
always @ *
begin
case (S_AXI_ASIZE)
3'b000: addr_step = 16'h0010;
3'b001: addr_step = 16'h0020;
3'b010: addr_step = 16'h0040;
3'b011: addr_step = 16'h0080;
3'b100: addr_step = 16'h0100;
3'b101: addr_step = 16'h0200;
3'b110: addr_step = 16'h0400;
3'b111: addr_step = 16'h0800;
endcase
end
// Generate address mask bits to remove split transaction unalignment.
always @ *
begin
case (S_AXI_ASIZE)
3'b000: size_mask = C_SIZE_MASK[8 +: C_AXI_ADDR_WIDTH];
3'b001: size_mask = C_SIZE_MASK[7 +: C_AXI_ADDR_WIDTH];
3'b010: size_mask = C_SIZE_MASK[6 +: C_AXI_ADDR_WIDTH];
3'b011: size_mask = C_SIZE_MASK[5 +: C_AXI_ADDR_WIDTH];
3'b100: size_mask = C_SIZE_MASK[4 +: C_AXI_ADDR_WIDTH];
3'b101: size_mask = C_SIZE_MASK[3 +: C_AXI_ADDR_WIDTH];
3'b110: size_mask = C_SIZE_MASK[2 +: C_AXI_ADDR_WIDTH];
3'b111: size_mask = C_SIZE_MASK[1 +: C_AXI_ADDR_WIDTH];
endcase
end
/////////////////////////////////////////////////////////////////////////////
// Transfer SI-Side signals to internal Pipeline Stage.
//
/////////////////////////////////////////////////////////////////////////////
always @ (posedge ACLK) begin
if ( ARESET ) begin
access_is_incr_q <= 1'b0;
incr_need_to_split_q <= 1'b0;
num_transactions_q <= 4'b0;
addr_step_q <= 16'b0;
first_step_q <= 16'b0;
size_mask_q <= {C_AXI_ADDR_WIDTH{1'b0}};
end else begin
if ( S_AXI_AREADY_I ) begin
access_is_incr_q <= access_is_incr;
incr_need_to_split_q <= incr_need_to_split;
num_transactions_q <= num_transactions;
addr_step_q <= addr_step;
first_step_q <= first_step;
size_mask_q <= size_mask;
end
end
end
/////////////////////////////////////////////////////////////////////////////
// Generate Command Information.
//
// Detect if current transation needs to be split, and keep track of all
// the generated split transactions.
//
//
/////////////////////////////////////////////////////////////////////////////
// Detect when INCR must be split.
assign incr_need_to_split = access_is_incr & ( num_transactions != 0 ) &
( C_SUPPORT_SPLITTING == 1 ) &
( C_SUPPORT_BURSTS == 1 );
// Detect when a command has to be split.
assign need_to_split_q = incr_need_to_split_q;
// Handle progress of split transactions.
always @ (posedge ACLK) begin
if ( ARESET ) begin
split_ongoing <= 1'b0;
end else begin
if ( pushed_new_cmd ) begin
split_ongoing <= need_to_split_q & ~last_split;
end
end
end
// Keep track of number of transactions generated.
always @ (posedge ACLK) begin
if ( ARESET ) begin
pushed_commands <= 4'b0;
end else begin
if ( S_AXI_AREADY_I ) begin
pushed_commands <= 4'b0;
end else if ( pushed_new_cmd ) begin
pushed_commands <= pushed_commands + 4'b1;
end
end
end
// Detect last part of a command, split or not.
assign last_incr_split = access_is_incr_q & ( num_transactions_q == pushed_commands );
assign last_split = last_incr_split | ~access_is_incr_q |
( C_SUPPORT_SPLITTING == 0 ) |
( C_SUPPORT_BURSTS == 0 );
assign first_split = (pushed_commands == 4'b0);
// Calculate base for next address.
always @ (posedge ACLK) begin
if ( ARESET ) begin
next_mi_addr = {C_AXI_ADDR_WIDTH{1'b0}};
end else if ( pushed_new_cmd ) begin
next_mi_addr = M_AXI_AADDR_I + (first_split ? first_step_q : addr_step_q);
end
end
/////////////////////////////////////////////////////////////////////////////
// Translating Transaction.
//
// Set Split transaction information on all part except last for a transaction
// that needs splitting.
// The B Channel will only get one command for a Split transaction and in
// the Split bflag will be set in that case.
//
// The AWID is extracted and applied to all commands generated for the current
// incomming SI-Side transaction.
//
// The address is increased for each part of a Split transaction, the amount
// depends on the siSIZE for the transaction.
//
// The length has to be changed for Split transactions. All part except tha
// last one will have 0xF, the last one uses the 4 lsb bits from the SI-side
// transaction as length.
//
// Non-Split has untouched address and length information.
//
// Exclusive access are diasabled for a Split transaction because it is not
// possible to guarantee concistency between all the parts.
//
/////////////////////////////////////////////////////////////////////////////
// Assign Split signals.
assign cmd_split_i = need_to_split_q & ~last_split;
assign cmd_b_split_i = need_to_split_q & ~last_split;
// Copy AW ID to W.
assign cmd_id_i = S_AXI_AID_Q;
// Set B Responses to merge.
assign cmd_b_repeat_i = num_transactions_q;
// Select new size or remaining size.
always @ *
begin
if ( split_ongoing & access_is_incr_q ) begin
M_AXI_AADDR_I = next_mi_addr & size_mask_q;
end else begin
M_AXI_AADDR_I = S_AXI_AADDR_Q;
end
end
// Generate the base length for each transaction.
always @ *
begin
if ( first_split | ~need_to_split_q ) begin
M_AXI_ALEN_I = S_AXI_ALEN_Q[0 +: 4];
cmd_length_i = S_AXI_ALEN_Q[0 +: 4];
end else begin
M_AXI_ALEN_I = 4'hF;
cmd_length_i = 4'hF;
end
end
// Kill Exclusive for Split transactions.
always @ *
begin
if ( need_to_split_q ) begin
M_AXI_ALOCK_I = 2'b00;
end else begin
M_AXI_ALOCK_I = {1'b0, S_AXI_ALOCK_Q};
end
end
/////////////////////////////////////////////////////////////////////////////
// Forward the command to the MI-side interface.
//
// It is determined that this is an allowed command/access when there is
// room in the command queue (and it passes ID and Split checks as required).
//
/////////////////////////////////////////////////////////////////////////////
// Move SI-side transaction to internal pipe stage.
always @ (posedge ACLK) begin
if (ARESET) begin
command_ongoing <= 1'b0;
S_AXI_AREADY_I <= 1'b0;
end else begin
if (areset_d == 2'b10) begin
S_AXI_AREADY_I <= 1'b1;
end else begin
if ( S_AXI_AVALID & S_AXI_AREADY_I ) begin
command_ongoing <= 1'b1;
S_AXI_AREADY_I <= 1'b0;
end else if ( pushed_new_cmd & last_split ) begin
command_ongoing <= 1'b0;
S_AXI_AREADY_I <= 1'b1;
end
end
end
end
// Generate ready signal.
assign S_AXI_AREADY = S_AXI_AREADY_I;
// Only allowed to forward translated command when command queue is ok with it.
assign M_AXI_AVALID_I = allow_new_cmd & command_ongoing;
// Detect when MI-side is stalling.
assign mi_stalling = M_AXI_AVALID_I & ~M_AXI_AREADY_I;
/////////////////////////////////////////////////////////////////////////////
// Simple transfer of paramters that doesn't need to be adjusted.
//
// ID - Transaction still recognized with the same ID.
// CACHE - No need to change the chache features. Even if the modyfiable
// bit is overridden (forcefully) there is no need to let downstream
// component beleive it is ok to modify it further.
// PROT - Security level of access is not changed when upsizing.
// QOS - Quality of Service is static 0.
// USER - User bits remains the same.
//
/////////////////////////////////////////////////////////////////////////////
assign M_AXI_AID_I = S_AXI_AID_Q;
assign M_AXI_ASIZE_I = S_AXI_ASIZE_Q;
assign M_AXI_ABURST_I = S_AXI_ABURST_Q;
assign M_AXI_ACACHE_I = S_AXI_ACACHE_Q;
assign M_AXI_APROT_I = S_AXI_APROT_Q;
assign M_AXI_AQOS_I = S_AXI_AQOS_Q;
assign M_AXI_AUSER_I = ( C_AXI_SUPPORTS_USER_SIGNALS ) ? S_AXI_AUSER_Q : {C_AXI_AUSER_WIDTH{1'b0}};
/////////////////////////////////////////////////////////////////////////////
// Control command queue to W/R channel.
//
// Commands can be pushed into the Cmd FIFO even if MI-side is stalling.
// A flag is set if MI-side is stalling when Command is pushed to the
// Cmd FIFO. This will prevent multiple push of the same Command as well as
// keeping the MI-side Valid signal if the Allow Cmd requirement has been
// updated to disable furter Commands (I.e. it is made sure that the SI-side
// Command has been forwarded to both Cmd FIFO and MI-side).
//
// It is allowed to continue pushing new commands as long as
// * There is room in the queue(s)
// * The ID is the same as previously queued. Since data is not reordered
// for the same ID it is always OK to let them proceed.
// Or, if no split transaction is ongoing any ID can be allowed.
//
/////////////////////////////////////////////////////////////////////////////
// Keep track of current ID in queue.
always @ (posedge ACLK) begin
if (ARESET) begin
queue_id <= {C_AXI_ID_WIDTH{1'b0}};
multiple_id_non_split <= 1'b0;
split_in_progress <= 1'b0;
end else begin
if ( cmd_push ) begin
// Store ID (it will be matching ID or a "new beginning").
queue_id <= S_AXI_AID_Q;
end
if ( no_cmd & no_b_cmd ) begin
multiple_id_non_split <= 1'b0;
end else if ( cmd_push & allow_non_split_cmd & ~id_match ) begin
multiple_id_non_split <= 1'b1;
end
if ( no_cmd & no_b_cmd ) begin
split_in_progress <= 1'b0;
end else if ( cmd_push & allow_split_cmd ) begin
split_in_progress <= 1'b1;
end
end
end
// Determine if the command FIFOs are empty.
assign no_cmd = almost_empty & cmd_ready | cmd_empty;
assign no_b_cmd = almost_b_empty & cmd_b_ready | cmd_b_empty;
// Check ID to make sure this command is allowed.
assign id_match = ( C_SINGLE_THREAD == 0 ) | ( queue_id == S_AXI_AID_Q);
assign cmd_id_check = (cmd_empty & cmd_b_empty) | ( id_match & (~cmd_empty | ~cmd_b_empty) );
// Command type affects possibility to push immediately or wait.
assign allow_split_cmd = need_to_split_q & cmd_id_check & ~multiple_id_non_split;
assign allow_non_split_cmd = ~need_to_split_q & (cmd_id_check | ~split_in_progress);
assign allow_this_cmd = allow_split_cmd | allow_non_split_cmd | ( C_SINGLE_THREAD == 0 );
// Check if it is allowed to push more commands.
assign allow_new_cmd = (~cmd_full & ~cmd_b_full & allow_this_cmd) |
cmd_push_block;
// Push new command when allowed and MI-side is able to receive the command.
assign cmd_push = M_AXI_AVALID_I & ~cmd_push_block;
assign cmd_b_push = M_AXI_AVALID_I & ~cmd_b_push_block & (C_AXI_CHANNEL == 0);
// Block furter push until command has been forwarded to MI-side.
always @ (posedge ACLK) begin
if (ARESET) begin
cmd_push_block <= 1'b0;
end else begin
if ( pushed_new_cmd ) begin
cmd_push_block <= 1'b0;
end else if ( cmd_push & mi_stalling ) begin
cmd_push_block <= 1'b1;
end
end
end
// Block furter push until command has been forwarded to MI-side.
always @ (posedge ACLK) begin
if (ARESET) begin
cmd_b_push_block <= 1'b0;
end else begin
if ( S_AXI_AREADY_I ) begin
cmd_b_push_block <= 1'b0;
end else if ( cmd_b_push ) begin
cmd_b_push_block <= 1'b1;
end
end
end
// Acknowledge command when we can push it into queue (and forward it).
assign pushed_new_cmd = M_AXI_AVALID_I & M_AXI_AREADY_I;
/////////////////////////////////////////////////////////////////////////////
// Command Queue (W/R):
//
// Instantiate a FIFO as the queue and adjust the control signals.
//
// The features from Command FIFO can be reduced depending on configuration:
// Read Channel only need the split information.
// Write Channel always require ID information. When bursts are supported
// Split and Length information is also used.
//
/////////////////////////////////////////////////////////////////////////////
// Instantiated queue.
generate
if ( C_AXI_CHANNEL == 1 && C_SUPPORT_SPLITTING == 1 && C_SUPPORT_BURSTS == 1 ) begin : USE_R_CHANNEL
axi_data_fifo_v2_1_axic_fifo #
(
.C_FAMILY(C_FAMILY),
.C_FIFO_DEPTH_LOG(C_FIFO_DEPTH_LOG),
.C_FIFO_WIDTH(1),
.C_FIFO_TYPE("lut")
)
cmd_queue
(
.ACLK(ACLK),
.ARESET(ARESET),
.S_MESG({cmd_split_i}),
.S_VALID(cmd_push),
.S_READY(s_ready),
.M_MESG({cmd_split}),
.M_VALID(cmd_valid),
.M_READY(cmd_ready)
);
assign cmd_id = {C_AXI_ID_WIDTH{1'b0}};
assign cmd_length = 4'b0;
end else if (C_SUPPORT_BURSTS == 1) begin : USE_BURSTS
axi_data_fifo_v2_1_axic_fifo #
(
.C_FAMILY(C_FAMILY),
.C_FIFO_DEPTH_LOG(C_FIFO_DEPTH_LOG),
.C_FIFO_WIDTH(C_AXI_ID_WIDTH+4),
.C_FIFO_TYPE("lut")
)
cmd_queue
(
.ACLK(ACLK),
.ARESET(ARESET),
.S_MESG({cmd_id_i, cmd_length_i}),
.S_VALID(cmd_push),
.S_READY(s_ready),
.M_MESG({cmd_id, cmd_length}),
.M_VALID(cmd_valid),
.M_READY(cmd_ready)
);
assign cmd_split = 1'b0;
end else begin : NO_BURSTS
axi_data_fifo_v2_1_axic_fifo #
(
.C_FAMILY(C_FAMILY),
.C_FIFO_DEPTH_LOG(C_FIFO_DEPTH_LOG),
.C_FIFO_WIDTH(C_AXI_ID_WIDTH),
.C_FIFO_TYPE("lut")
)
cmd_queue
(
.ACLK(ACLK),
.ARESET(ARESET),
.S_MESG({cmd_id_i}),
.S_VALID(cmd_push),
.S_READY(s_ready),
.M_MESG({cmd_id}),
.M_VALID(cmd_valid),
.M_READY(cmd_ready)
);
assign cmd_split = 1'b0;
assign cmd_length = 4'b0;
end
endgenerate
// Queue is concidered full when not ready.
assign cmd_full = ~s_ready;
// Queue is empty when no data at output port.
always @ (posedge ACLK) begin
if (ARESET) begin
cmd_empty <= 1'b1;
cmd_depth <= {C_FIFO_DEPTH_LOG+1{1'b0}};
end else begin
if ( cmd_push & ~cmd_ready ) begin
// Push only => Increase depth.
cmd_depth <= cmd_depth + 1'b1;
cmd_empty <= 1'b0;
end else if ( ~cmd_push & cmd_ready ) begin
// Pop only => Decrease depth.
cmd_depth <= cmd_depth - 1'b1;
cmd_empty <= almost_empty;
end
end
end
assign almost_empty = ( cmd_depth == 1 );
/////////////////////////////////////////////////////////////////////////////
// Command Queue (B):
//
// Add command queue for B channel only when it is AW channel and both burst
// and splitting is supported.
//
// When turned off the command appears always empty.
//
/////////////////////////////////////////////////////////////////////////////
// Instantiated queue.
generate
if ( C_AXI_CHANNEL == 0 && C_SUPPORT_SPLITTING == 1 && C_SUPPORT_BURSTS == 1 ) begin : USE_B_CHANNEL
wire cmd_b_valid_i;
wire s_b_ready;
axi_data_fifo_v2_1_axic_fifo #
(
.C_FAMILY(C_FAMILY),
.C_FIFO_DEPTH_LOG(C_FIFO_DEPTH_LOG),
.C_FIFO_WIDTH(1+4),
.C_FIFO_TYPE("lut")
)
cmd_b_queue
(
.ACLK(ACLK),
.ARESET(ARESET),
.S_MESG({cmd_b_split_i, cmd_b_repeat_i}),
.S_VALID(cmd_b_push),
.S_READY(s_b_ready),
.M_MESG({cmd_b_split, cmd_b_repeat}),
.M_VALID(cmd_b_valid_i),
.M_READY(cmd_b_ready)
);
// Queue is concidered full when not ready.
assign cmd_b_full = ~s_b_ready;
// Queue is empty when no data at output port.
always @ (posedge ACLK) begin
if (ARESET) begin
cmd_b_empty <= 1'b1;
cmd_b_depth <= {C_FIFO_DEPTH_LOG+1{1'b0}};
end else begin
if ( cmd_b_push & ~cmd_b_ready ) begin
// Push only => Increase depth.
cmd_b_depth <= cmd_b_depth + 1'b1;
cmd_b_empty <= 1'b0;
end else if ( ~cmd_b_push & cmd_b_ready ) begin
// Pop only => Decrease depth.
cmd_b_depth <= cmd_b_depth - 1'b1;
cmd_b_empty <= ( cmd_b_depth == 1 );
end
end
end
assign almost_b_empty = ( cmd_b_depth == 1 );
// Assign external signal.
assign cmd_b_valid = cmd_b_valid_i;
end else begin : NO_B_CHANNEL
// Assign external command signals.
assign cmd_b_valid = 1'b0;
assign cmd_b_split = 1'b0;
assign cmd_b_repeat = 4'b0;
// Assign internal command FIFO signals.
assign cmd_b_full = 1'b0;
assign almost_b_empty = 1'b0;
always @ (posedge ACLK) begin
if (ARESET) begin
cmd_b_empty <= 1'b1;
cmd_b_depth <= {C_FIFO_DEPTH_LOG+1{1'b0}};
end else begin
// Constant FF due to ModelSim behavior.
cmd_b_empty <= 1'b1;
cmd_b_depth <= {C_FIFO_DEPTH_LOG+1{1'b0}};
end
end
end
endgenerate
/////////////////////////////////////////////////////////////////////////////
// MI-side output handling
//
/////////////////////////////////////////////////////////////////////////////
assign M_AXI_AID = M_AXI_AID_I;
assign M_AXI_AADDR = M_AXI_AADDR_I;
assign M_AXI_ALEN = M_AXI_ALEN_I;
assign M_AXI_ASIZE = M_AXI_ASIZE_I;
assign M_AXI_ABURST = M_AXI_ABURST_I;
assign M_AXI_ALOCK = M_AXI_ALOCK_I;
assign M_AXI_ACACHE = M_AXI_ACACHE_I;
assign M_AXI_APROT = M_AXI_APROT_I;
assign M_AXI_AQOS = M_AXI_AQOS_I;
assign M_AXI_AUSER = M_AXI_AUSER_I;
assign M_AXI_AVALID = M_AXI_AVALID_I;
assign M_AXI_AREADY_I = M_AXI_AREADY;
endmodule
|
// This is a component of pluto_servo, a PWM servo driver and quadrature
// counter for emc2
// Copyright 2006 Jeff Epler <jepler@unpythonic.net>
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1507 USA
module quad(clk, A, B, Z, zr, out);
parameter W=14;
input clk, A, B, Z, zr;
reg [(W-1):0] c, i; reg zl;
output [2*W:0] out = { zl, i, c };
// reg [(W-1):0] c, i; reg zl;
reg [2:0] Ad, Bd;
reg [2:0] Zc;
always @(posedge clk) Ad <= {Ad[1:0], A};
always @(posedge clk) Bd <= {Bd[1:0], B};
wire good_one = &Zc;
wire good_zero = ~|Zc;
reg last_good;
wire index_pulse = good_one && ! last_good;
wire count_enable = Ad[1] ^ Ad[2] ^ Bd[1] ^ Bd[2];
wire count_direction = Ad[1] ^ Bd[2];
always @(posedge clk)
begin
if(Z && !good_one) Zc <= Zc + 2'b1;
else if(!good_zero) Zc <= Zc - 2'b1;
if(good_one) last_good <= 1;
else if(good_zero) last_good <= 0;
if(count_enable)
begin
if(count_direction) c <= c + 1'd1;
else c <= c - 1'd1;
end
if(index_pulse) begin
i <= c;
zl <= 1;
end else if(zr) begin
zl <= 0;
end
end
endmodule
|
// This is a component of pluto_servo, a PWM servo driver and quadrature
// counter for emc2
// Copyright 2006 Jeff Epler <jepler@unpythonic.net>
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1507 USA
module quad(clk, A, B, Z, zr, out);
parameter W=14;
input clk, A, B, Z, zr;
reg [(W-1):0] c, i; reg zl;
output [2*W:0] out = { zl, i, c };
// reg [(W-1):0] c, i; reg zl;
reg [2:0] Ad, Bd;
reg [2:0] Zc;
always @(posedge clk) Ad <= {Ad[1:0], A};
always @(posedge clk) Bd <= {Bd[1:0], B};
wire good_one = &Zc;
wire good_zero = ~|Zc;
reg last_good;
wire index_pulse = good_one && ! last_good;
wire count_enable = Ad[1] ^ Ad[2] ^ Bd[1] ^ Bd[2];
wire count_direction = Ad[1] ^ Bd[2];
always @(posedge clk)
begin
if(Z && !good_one) Zc <= Zc + 2'b1;
else if(!good_zero) Zc <= Zc - 2'b1;
if(good_one) last_good <= 1;
else if(good_zero) last_good <= 0;
if(count_enable)
begin
if(count_direction) c <= c + 1'd1;
else c <= c - 1'd1;
end
if(index_pulse) begin
i <= c;
zl <= 1;
end else if(zr) begin
zl <= 0;
end
end
endmodule
|